Welcome to RaptorsOnly.com
-
Brands
Shop by brand
- 3D MAXpider
- Access
- Addictive Desert Designs
- Advan
- AEM Induction
- aFe
- Air Lift
- Airaid
- Alcon
- AlphaRex
- AMP Research
- AMS
- Anderson Composites
- ANZO
- ARB
- Atturo Tire
- AutoMeter
- AVS
- AWE Tuning
- BackRack
- Baer Brakes
- Baja Designs
- BAK
- Banks Power
- BBK
- BBS
- BD Diesel
- Belltech
- Bestop
- BFGoodrich
- BMC
- Body Armor 4x4
- Borla
- Brembo
- Brembo OE
- Bully Dog
- Bushwacker
- Camburg
- Clevite
- COBB
- Cometic Gasket
- COMP Cams
- CORSA Performance
- Covercraft
- CSF
- DBA
- DeatschWerks
- DFC
- Diode Dynamics
- DS18
- DV8 Offroad
- Eaton
- EBC
- Eibach
- Enkei
- Extang
- Fabtech
- Fel-Pro
- fifteen52
- Firestone
- Flowmaster
- Ford Racing
- Forgestar
- FORM Lighting
- FOX
- Garrett
- Gates
- GEN-Y Hitch
- Go Fast Bits
- Go Rhino
- Gram Lights
- Granatelli Motor Sports
- GSC Power Division
- Hawk Performance
- Hella
- Hellwig
- Hotchkis
- Husky Liners
- ICON
- Injen
- J&L
- JBA
- JLT
- K&N Engineering
- KC HiLiTES
- King Engine Bearings
- King Shocks
- Kleinn Air Horns
- Kooks Headers
- KYB
- LIQUI MOLY
- LUND
- Magnaflow
- Mahle OE
- Maxtrac
- Mayhem
- MBRP
- McGard
- Method Wheels
- MGP
- Michelin
- Mickey Thompson
- Mishimoto
- Moog
- Motul
- MTX Wheels
- N-Fab
- Nacho Offroad Technology
- NGK
- Nitrous Express
- Odyssey Battery
- ORACLE Lighting
- PowerStop
- Putco
- QA1
- Raceline
- Radium Engineering
- Rally Armor
- Rampage
- Raxiom
- Retrax
- Rhino-Rack
- Ridetech
- Rigid Industries
- Rival 4x4
- RockJock
- Roll-N-Lock
- Roush
- Royal Purple
- SCT Performance
- Skyjacker
- Snow Performance
- SPC Performance
- SPOD
- Stainless Works
- Superlift
- Superpro
- Timbren
- Torque Solution
- TOYO
- Truxedo
- Tuff Country
- Turbosmart
- UMI Performance
- Undercover
- Volant
- Vossen
- Wagner Tuning
- WeatherTech
- Weld
- Westin
- Whiteline
- Wilwood
- Yokohama Tire
- Yukon Gear & Axle
- Zone Offroad
No brands found. Try another name or initial.
156 brands
View all brands -
F-150 Raptor
- F-150 Raptor
-
1st Gen (2010-2014)
-
2nd Gen (2017-2020)
-
3rd Gen (2021-Present)
-
Raptor R (2023-Present)
-
Bronco Raptor
- Bronco Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
-
Ranger Raptor
- Ranger Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
Your cart
You'll love this too
Discount invalid. Please make sure the discount details are correct.
Discount code is already applied.
Discount applied!
Subheading
Product comparison
Describe you product comparison grid
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
Find wheels and tires that fit your Raptor
Pick your truck and we'll narrow the catalogue to the wheels drilled for your bolt pattern and the tire sizes that fit your rims.
Shopping for
- Bolt pattern
- Hub bore
- Factory tire
365 products
365 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
The ICON Alloys Rancho is a solidly built 20 inch wheel meant to stand up on the street or the trail. This listing is the Silver Machined w/ Gloss Black Lip finish in 20 x 9 inch, 6x135, 16mm offset, 5.625 inch backspacing. Fitted here as a Ford Raptor wheel by bolt pattern.
Built around ICON's wheel approach. ICON engineers each wheel to maximize caliper clearance and to optimize wheel position for unhindered suspension travel and steering function. Backspacing and offset are chosen to reduce scrub radius, which ICON says improves handling and ride quality.
Design and finish. ICON offers the Rancho in Double Black, Satin Bronze with Gloss Black Lip, and Silver Machined with Gloss Black Lip finishes. This one is Silver Machined w/ Gloss Black Lip.
Features
- 20 inch diameter, 9 inch width
- Engineered to maximize caliper clearance and optimize wheel position for suspension travel and steering function
- Backspacing and offset set to reduce scrub radius
- 20 x 9 inch, 6x135 bolt pattern, 16mm offset, 5.625 inch backspacing
Fitment: ICON publishes this wheel as 20 x 9 inch, 6x135 bolt pattern, 16mm offset, 5.625 inch backspacing and does not name vehicles. It is listed for the Ford Raptor models that use a 6x135 bolt pattern: the 2017-2026 F-150 Raptor, 2023-2026 F-150 Raptor R and 2022-2026 Bronco Raptor. ICON and the supplier do not publish a center bore for this part; the supplier's own application list names the 2017-2026 F-150 Raptor, and Ford's Raptor hub is 87.1 mm, so confirm the bore is 87.1 mm or larger (a hub-centric ring fills any gap) before ordering. Fitment decided by bolt pattern against Ford's Raptor hub specs; the center bore is not confirmed. These Raptors take M14x1.5 lug nuts; ICON's page does not list lug nuts with this wheel, so check what ships with it before you order.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
The ICON Alloys Rancho is a solidly built 20 inch wheel meant to stand up on the street or the trail. This listing is the Satin Bronze w/ Gloss Black Lip finish in 20 x 9 inch, 6x135, 16mm offset, 5.625 inch backspacing. Fitted here as a Ford Raptor wheel by bolt pattern.
Built around ICON's wheel approach. ICON engineers each wheel to maximize caliper clearance and to optimize wheel position for unhindered suspension travel and steering function. Backspacing and offset are chosen to reduce scrub radius, which ICON says improves handling and ride quality.
Design and finish. ICON offers the Rancho in Double Black, Satin Bronze with Gloss Black Lip, and Silver Machined with Gloss Black Lip finishes. This one is Satin Bronze w/ Gloss Black Lip.
Features
- 20 inch diameter, 9 inch width
- Engineered to maximize caliper clearance and optimize wheel position for suspension travel and steering function
- Backspacing and offset set to reduce scrub radius
- 20 x 9 inch, 6x135 bolt pattern, 16mm offset, 5.625 inch backspacing
Fitment: ICON publishes this wheel as 20 x 9 inch, 6x135 bolt pattern, 16mm offset, 5.625 inch backspacing and does not name vehicles. It is listed for the Ford Raptor models that use a 6x135 bolt pattern: the 2017-2026 F-150 Raptor, 2023-2026 F-150 Raptor R and 2022-2026 Bronco Raptor. ICON and the supplier do not publish a center bore for this part; the supplier's own application list names the 2017-2026 F-150 Raptor, and Ford's Raptor hub is 87.1 mm, so confirm the bore is 87.1 mm or larger (a hub-centric ring fills any gap) before ordering. Fitment decided by bolt pattern against Ford's Raptor hub specs; the center bore is not confirmed. These Raptors take M14x1.5 lug nuts; ICON's page does not list lug nuts with this wheel, so check what ships with it before you order.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
The ICON Alloys Anza takes its name from Southern California's Anza-Borrego desert and pairs a concave profile with a deep stepped lip. This listing is the Satin Black finish in 17 x 8.5 inch, 6x5.5, 25mm offset, 5.75 inch backspacing and 95.1mm center bore. Fitted here as a Ford Raptor wheel by bolt pattern.
Built around ICON's wheel approach. ICON engineers each wheel to maximize caliper clearance and to optimize wheel position for unhindered suspension travel and steering function. Backspacing and offset are chosen to reduce scrub radius, which ICON says improves handling and ride quality.
Design and finish. ICON offers the Anza in a 17 inch diameter and 8.5 inch width, with several offsets, so you can dial it in for your application. This one is Satin Black.
Features
- Concave profile with a deep stepped lip
- Engineered to maximize caliper clearance and optimize wheel position for suspension travel and steering function
- Backspacing and offset set to reduce scrub radius
- 17 x 8.5 inch, 6x5.5 bolt pattern, 25mm offset, 5.75 inch backspacing, 95.1mm center bore
Fitment: ICON publishes this wheel as 17 x 8.5 inch, 6x5.5 bolt pattern, 25mm offset, 5.75 inch backspacing and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor, which uses a 6x5.5 (6x139.7) bolt pattern and a 93.1 mm hub; this wheel's 95.1mm center bore (from the supplier's listing) is larger than the hub, so a hub-centric ring fills the gap. Fitment decided by bolt pattern and center bore against Ford's Raptor hub specs. The Ranger Raptor takes M12x1.5 lug nuts; ICON's page does not list lug nuts with this wheel, so check what ships with it before you order.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Alloys Hulse is a motorsport-inspired wheel with an aggressive concave profile, twelve deep spokes, a thick lip and oversized ring bolts. This listing is the Double Black finish in 17 x 8.5 inch, 6x5.5, 25mm offset, 5.75 inch backspacing. Fitted here as a Ford Raptor wheel by bolt pattern.
Built around ICON's wheel approach. ICON engineers each wheel to maximize caliper clearance and to optimize wheel position for unhindered suspension travel and steering function. Backspacing and offset are chosen to reduce scrub radius, which ICON says improves handling and ride quality.
Design and finish. ICON offers the Hulse in Double Black and Silver Machined finishes, with fitments for both 6-lug and 5-lug applications. This one is Double Black.
Features
- Aggressive concave profile with twelve deep spokes
- Thick lip with oversized ring bolts
- Engineered to maximize caliper clearance and optimize wheel position for suspension travel and steering function
- Backspacing and offset set to reduce scrub radius
- 17 x 8.5 inch, 6x5.5 bolt pattern, 25mm offset, 5.75 inch backspacing
Fitment: ICON publishes this wheel as 17 x 8.5 inch, 6x5.5 bolt pattern, 25mm offset, 5.75 inch backspacing and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor, which uses a 6x5.5 (6x139.7) bolt pattern and a 93.1 mm hub. ICON and the supplier do not publish a center bore for this part, so confirm it is 93.1 mm or larger before ordering. Fitment decided by bolt pattern against Ford's Raptor hub specs; the center bore is not confirmed. The Ranger Raptor takes M12x1.5 lug nuts; ICON's page does not list lug nuts with this wheel, so check what ships with it before you order.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Alloys Hulse is a motorsport-inspired wheel with an aggressive concave profile, twelve deep spokes, a thick lip and oversized ring bolts. This listing is the Double Black finish in 17 x 8.5 inch, 6x5.5, 0mm offset, 4.75 inch backspacing. Fitted here as a Ford Raptor wheel by bolt pattern.
Built around ICON's wheel approach. ICON engineers each wheel to maximize caliper clearance and to optimize wheel position for unhindered suspension travel and steering function. Backspacing and offset are chosen to reduce scrub radius, which ICON says improves handling and ride quality.
Design and finish. ICON offers the Hulse in Double Black and Silver Machined finishes, with fitments for both 6-lug and 5-lug applications. This one is Double Black.
Features
- Aggressive concave profile with twelve deep spokes
- Thick lip with oversized ring bolts
- Engineered to maximize caliper clearance and optimize wheel position for suspension travel and steering function
- Backspacing and offset set to reduce scrub radius
- 17 x 8.5 inch, 6x5.5 bolt pattern, 0mm offset, 4.75 inch backspacing
Fitment: ICON publishes this wheel as 17 x 8.5 inch, 6x5.5 bolt pattern, 0mm offset, 4.75 inch backspacing and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor, which uses a 6x5.5 (6x139.7) bolt pattern and a 93.1 mm hub. ICON and the supplier do not publish a center bore for this part, so confirm it is 93.1 mm or larger before ordering. Fitment decided by bolt pattern against Ford's Raptor hub specs; the center bore is not confirmed. The Ranger Raptor takes M12x1.5 lug nuts; ICON's page does not list lug nuts with this wheel, so check what ships with it before you order.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Alloys Hulse is a motorsport-inspired wheel with an aggressive concave profile, twelve deep spokes, a thick lip and oversized ring bolts. This listing is the Silver Machined finish in 17 x 8.5 inch, 6x135, 6mm offset, 5 inch backspacing. Fitted here as a Ford Raptor wheel by bolt pattern.
Built around ICON's wheel approach. ICON engineers each wheel to maximize caliper clearance and to optimize wheel position for unhindered suspension travel and steering function. Backspacing and offset are chosen to reduce scrub radius, which ICON says improves handling and ride quality.
Design and finish. ICON offers the Hulse in Double Black and Silver Machined finishes, with fitments for both 6-lug and 5-lug applications. This one is Silver Machined.
Features
- Aggressive concave profile with twelve deep spokes
- Thick lip with oversized ring bolts
- Engineered to maximize caliper clearance and optimize wheel position for suspension travel and steering function
- Backspacing and offset set to reduce scrub radius
- 17 x 8.5 inch, 6x135 bolt pattern, 6mm offset, 5 inch backspacing
Fitment: ICON publishes this wheel as 17 x 8.5 inch, 6x135 bolt pattern, 6mm offset, 5 inch backspacing and does not name vehicles. It is listed for the Ford Raptor models that use a 6x135 bolt pattern: the 2017-2026 F-150 Raptor, 2023-2026 F-150 Raptor R and 2022-2026 Bronco Raptor. ICON and the supplier do not publish a center bore for this part; the supplier's own application list names the 2017-2026 F-150 Raptor, and Ford's Raptor hub is 87.1 mm, so confirm the bore is 87.1 mm or larger (a hub-centric ring fills any gap) before ordering. Fitment decided by bolt pattern against Ford's Raptor hub specs; the center bore is not confirmed. These Raptors take M14x1.5 lug nuts; ICON's page does not list lug nuts with this wheel, so check what ships with it before you order.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
The ICON Alloys Recon SLX is a 16-spoke concave wheel with a smooth lip and an embossed ICON Alloys center cap. This listing is the Gloss Black finish in 18 x 9 inch, 6x5.5, 40mm offset, 6.6 inch backspacing. Fitted here as a Ford Raptor wheel by bolt pattern.
Built around ICON's wheel approach. ICON engineers each wheel to maximize caliper clearance and to optimize wheel position for unhindered suspension travel and steering function. Backspacing and offset are chosen to reduce scrub radius, which ICON says improves handling and ride quality.
Design and finish. ICON builds the Recon SLX to look right and to work right: the design pairs sharp lines with an ICON-optimized stance. This one is Gloss Black.
Features
- Concave 16-spoke design with a smooth lip
- Embossed ICON Alloys center cap
- Engineered to maximize caliper clearance and optimize wheel position for suspension travel and steering function
- Backspacing and offset set to reduce scrub radius
- 18 x 9 inch, 6x5.5 bolt pattern, 40mm offset, 6.6 inch backspacing
Fitment: ICON publishes this wheel as 18 x 9 inch, 6x5.5 bolt pattern, 40mm offset, 6.6 inch backspacing and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor, which uses a 6x5.5 (6x139.7) bolt pattern and a 93.1 mm hub. ICON and the supplier do not publish a center bore for this part, so confirm it is 93.1 mm or larger before ordering. Fitment decided by bolt pattern against Ford's Raptor hub specs; the center bore is not confirmed. The Ranger Raptor takes M12x1.5 lug nuts; ICON's page does not list lug nuts with this wheel, so check what ships with it before you order.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Alloys Recon SLX is a 16-spoke concave wheel with a smooth lip and an embossed ICON Alloys center cap. This listing is the Charcoal finish in 18 x 9 inch, 6x5.5, 40mm offset, 6.6 inch backspacing and 95.1mm center bore. Fitted here as a Ford Raptor wheel by bolt pattern.
Built around ICON's wheel approach. ICON engineers each wheel to maximize caliper clearance and to optimize wheel position for unhindered suspension travel and steering function. Backspacing and offset are chosen to reduce scrub radius, which ICON says improves handling and ride quality.
Design and finish. ICON builds the Recon SLX to look right and to work right: the design pairs sharp lines with an ICON-optimized stance. This one is Charcoal.
Features
- Concave 16-spoke design with a smooth lip
- Embossed ICON Alloys center cap
- Engineered to maximize caliper clearance and optimize wheel position for suspension travel and steering function
- Backspacing and offset set to reduce scrub radius
- 18 x 9 inch, 6x5.5 bolt pattern, 40mm offset, 6.6 inch backspacing, 95.1mm center bore
Fitment: ICON publishes this wheel as 18 x 9 inch, 6x5.5 bolt pattern, 40mm offset, 6.6 inch backspacing and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor, which uses a 6x5.5 (6x139.7) bolt pattern and a 93.1 mm hub; this wheel's 95.1mm center bore (from the supplier's listing) is larger than the hub, so a hub-centric ring fills the gap. Fitment decided by bolt pattern and center bore against Ford's Raptor hub specs. The Ranger Raptor takes M12x1.5 lug nuts; ICON's page does not list lug nuts with this wheel, so check what ships with it before you order.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Alloys Recon SLX is a 16-spoke concave wheel with a smooth lip and an embossed ICON Alloys center cap. This listing is the Satin Black finish in 17 x 8.5 inch, 6x5.5, 25mm offset, 5.75 inch backspacing and 95.1mm center bore. Fitted here as a Ford Raptor wheel by bolt pattern.
Built around ICON's wheel approach. ICON engineers each wheel to maximize caliper clearance and to optimize wheel position for unhindered suspension travel and steering function. Backspacing and offset are chosen to reduce scrub radius, which ICON says improves handling and ride quality.
Design and finish. ICON builds the Recon SLX to look right and to work right: the design pairs sharp lines with an ICON-optimized stance. This one is Satin Black.
Features
- Concave 16-spoke design with a smooth lip
- Embossed ICON Alloys center cap
- Engineered to maximize caliper clearance and optimize wheel position for suspension travel and steering function
- Backspacing and offset set to reduce scrub radius
- 17 x 8.5 inch, 6x5.5 bolt pattern, 25mm offset, 5.75 inch backspacing, 95.1mm center bore
Fitment: ICON publishes this wheel as 17 x 8.5 inch, 6x5.5 bolt pattern, 25mm offset, 5.75 inch backspacing and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor, which uses a 6x5.5 (6x139.7) bolt pattern and a 93.1 mm hub; this wheel's 95.1mm center bore (from the supplier's listing) is larger than the hub, so a hub-centric ring fills the gap. Fitment decided by bolt pattern and center bore against Ford's Raptor hub specs. The Ranger Raptor takes M12x1.5 lug nuts; ICON's page does not list lug nuts with this wheel, so check what ships with it before you order.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Alloys Recon SLX is a 16-spoke concave wheel with a smooth lip and an embossed ICON Alloys center cap. This listing is the Charcoal finish in 17 x 8.5 inch, 6x5.5, 0mm offset, 4.75 inch backspacing and 106.1mm center bore. Fitted here as a Ford Raptor wheel by bolt pattern.
Built around ICON's wheel approach. ICON engineers each wheel to maximize caliper clearance and to optimize wheel position for unhindered suspension travel and steering function. Backspacing and offset are chosen to reduce scrub radius, which ICON says improves handling and ride quality.
Design and finish. ICON builds the Recon SLX to look right and to work right: the design pairs sharp lines with an ICON-optimized stance. This one is Charcoal.
Features
- Concave 16-spoke design with a smooth lip
- Embossed ICON Alloys center cap
- Engineered to maximize caliper clearance and optimize wheel position for suspension travel and steering function
- Backspacing and offset set to reduce scrub radius
- 17 x 8.5 inch, 6x5.5 bolt pattern, 0mm offset, 4.75 inch backspacing, 106.1mm center bore
Fitment: ICON publishes this wheel as 17 x 8.5 inch, 6x5.5 bolt pattern, 0mm offset, 4.75 inch backspacing and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor, which uses a 6x5.5 (6x139.7) bolt pattern and a 93.1 mm hub; this wheel's 106.1mm center bore (from the supplier's listing) is larger than the hub, so a hub-centric ring fills the gap. Fitment decided by bolt pattern and center bore against Ford's Raptor hub specs. The Ranger Raptor takes M12x1.5 lug nuts; ICON's page does not list lug nuts with this wheel, so check what ships with it before you order.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Alloys Vector 6 is a 17x8.5 wheel with sharp lines, a concave spoke design and "ICON-optimized" dimensions, finished in Satin Black. It uses a 6x5.5 (6x139.7) bolt pattern with a 0mm offset, 4.75in backspacing and a 106.1mm center bore.
Built around fit and clearance. ICON says the Vector 6 is engineered to maximize caliper clearance and position the wheel for unhindered suspension travel and steering.
Backspacing and offset set for handling. ICON developed the backspacing and offset to reduce scrub radius, which it says improves overall handling and ride quality, and makes the wheel a good complement to an ICON Vehicle Dynamics suspension system.
Features
- Size: 17 x 8.5
- Bolt pattern: 6 x 5.5 (6x139.7)
- Offset: 0mm; backspacing 4.75in
- Center bore: 106.1mm
- Finish: Satin Black
- Load rating: 2,750 lb per ICON's wheel table
- Aluminum alloy construction
Fitment: ICON publishes this wheel as 17 x 8.5, 6x5.5 with a 0mm offset and 4.75in backspacing and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor, the only Raptor that uses a 6x139.7 bolt pattern and a 93.1mm center bore. This wheel's 106.1mm bore is larger than the hub, so a hub-centric ring is needed to fill the gap. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs. The Ranger Raptor uses M12x1.5 lug nuts, and wheels are sold without lug nuts unless listed. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Alloys Vector 6 is a 17x8.5 wheel with sharp lines, a concave spoke design and "ICON-optimized" dimensions, finished in Bronze. It uses a 6x5.5 (6x139.7) bolt pattern with a 0mm offset, 4.75in backspacing and a 106.1mm center bore.
Built around fit and clearance. ICON says the Vector 6 is engineered to maximize caliper clearance and position the wheel for unhindered suspension travel and steering.
Backspacing and offset set for handling. ICON developed the backspacing and offset to reduce scrub radius, which it says improves overall handling and ride quality, and makes the wheel a good complement to an ICON Vehicle Dynamics suspension system.
Features
- Size: 17 x 8.5
- Bolt pattern: 6 x 5.5 (6x139.7)
- Offset: 0mm; backspacing 4.75in
- Center bore: 106.1mm
- Finish: Bronze
- Load rating: 2,750 lb per ICON's wheel table
- Aluminum alloy construction
Fitment: ICON publishes this wheel as 17 x 8.5, 6x5.5 with a 0mm offset and 4.75in backspacing and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor, the only Raptor that uses a 6x139.7 bolt pattern and a 93.1mm center bore. This wheel's 106.1mm bore is larger than the hub, so a hub-centric ring is needed to fill the gap. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs. The Ranger Raptor uses M12x1.5 lug nuts, and wheels are sold without lug nuts unless listed. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Alloys Vector 6 is a 17x8.5 wheel with sharp lines, a concave spoke design and "ICON-optimized" dimensions, finished in Satin Black. It uses a 6x135 bolt pattern with a 6mm offset, 5in backspacing and an 87.1mm center bore.
Built around fit and clearance. ICON says the Vector 6 is engineered to maximize caliper clearance and position the wheel for unhindered suspension travel and steering.
Backspacing and offset set for handling. ICON developed the backspacing and offset to reduce scrub radius, which it says improves overall handling and ride quality, and makes the wheel a good complement to an ICON Vehicle Dynamics suspension system.
Features
- Size: 17 x 8.5
- Bolt pattern: 6 x 135
- Offset: 6mm; backspacing 5in
- Center bore: 87.1mm
- Finish: Satin Black
- Load rating: 2,750 lb per ICON's wheel table
- Aluminum alloy construction
Fitment: ICON publishes this wheel as 17 x 8.5, 6x135 with a 6mm offset and 5in backspacing and does not name vehicles. It is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1mm center bore or larger: the 2017-2026 F-150 Raptor, the 2023-2026 F-150 Raptor R and the 2022-2026 Bronco Raptor. This wheel's 87.1mm bore matches the factory bore. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs. These Raptors use M14x1.5 lug nuts, and wheels are sold without lug nuts unless listed. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
The ICON Alloys Recon PRO is a 17x8.5 off-road wheel with ICON's patented InnerLock bead retention system and a removable HALO Wheel Armor ring, shown here in Charcoal with a black ring. It uses a 6x5.5 (6x139.7) bolt pattern with a 25mm offset, 5.75in backspacing and a 95.1mm center bore.
Low pressure without the beadlock upkeep. Running lower tire pressures improves ride quality and widens the contact patch, but raises the risk of de-beading under heavy side loads. ICON says traditional bead lock wheels solve that with frequent maintenance, specialty tools and parts, extra rotational mass, and are not legal for on-road use. InnerLock keeps the tire bead secured with a bead retention system and is DOT compliant.
Tested for bead retention. ICON subjected the Recon PRO to real-world abuse, then had an independent contractor run the FMVSS No. 139 Tire Bead Unseat Resistance Test, modified to 10 psi. ICON reports the machine reached its mechanical limit (over 7,600 lb of load) without de-beading the tire.
HALO Wheel Armor. The included high-grade aluminum HALO Wheel Armor is removable and replaceable, and protects the wheel from trail rash. It can be replaced in 90 degree segments, so a damaged section can be swapped without replacing the whole ring, and it can be customized to match your style.
Fit and handling. ICON engineered the wheel to maximize caliper clearance and position it for unhindered suspension travel and steering, with backspacing and offset chosen to reduce scrub radius. It is strength tested to a 3,200 lb load rating.
Features
- Size: 17 x 8.5
- Bolt pattern: 6 x 5.5 (6x139.7)
- Offset: 25mm; backspacing 5.75in
- Center bore: 95.1mm (per ICON's wheel table)
- Finish: Charcoal with black ring
- Patented InnerLock bead retention, DOT compliant
- Included replaceable HALO Wheel Armor
- 3,200 lb load rating
Fitment: ICON publishes this wheel as 17 x 8.5, 6x5.5 with a 25mm offset and 5.75in backspacing and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor, the only Raptor that uses a 6x139.7 bolt pattern and a 93.1mm center bore. This wheel's 95.1mm bore is larger than the hub, so a hub-centric ring is needed to fill the gap. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs. The Ranger Raptor uses M12x1.5 lug nuts, and wheels are sold without lug nuts unless listed. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Alloys Recon PRO is a 17x8.5 off-road wheel with ICON's patented InnerLock bead retention system and a removable HALO Wheel Armor ring, shown here in Satin Black. It uses a 6x5.5 (6x139.7) bolt pattern with a 0mm offset, 4.75in backspacing and a 106.1mm center bore.
Low pressure without the beadlock upkeep. Running lower tire pressures improves ride quality and widens the contact patch, but raises the risk of de-beading under heavy side loads. ICON says traditional bead lock wheels solve that with frequent maintenance, specialty tools and parts, extra rotational mass, and are not legal for on-road use. InnerLock keeps the tire bead secured with a bead retention system and is DOT compliant.
Tested for bead retention. ICON subjected the Recon PRO to real-world abuse, then had an independent contractor run the FMVSS No. 139 Tire Bead Unseat Resistance Test, modified to 10 psi. ICON reports the machine reached its mechanical limit (over 7,600 lb of load) without de-beading the tire.
HALO Wheel Armor. The included high-grade aluminum HALO Wheel Armor is removable and replaceable, and protects the wheel from trail rash. It can be replaced in 90 degree segments, so a damaged section can be swapped without replacing the whole ring, and it can be customized to match your style.
Fit and handling. ICON engineered the wheel to maximize caliper clearance and position it for unhindered suspension travel and steering, with backspacing and offset chosen to reduce scrub radius. It is strength tested to a 3,200 lb load rating.
Features
- Size: 17 x 8.5
- Bolt pattern: 6 x 5.5 (6x139.7)
- Offset: 0mm; backspacing 4.75in
- Center bore: 106.1mm
- Finish: Satin Black
- Patented InnerLock bead retention, DOT compliant
- Included replaceable HALO Wheel Armor
- 3,200 lb load rating
Fitment: ICON publishes this wheel as 17 x 8.5, 6x5.5 with a 0mm offset and 4.75in backspacing and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor, the only Raptor that uses a 6x139.7 bolt pattern and a 93.1mm center bore. This wheel's 106.1mm bore is larger than the hub, so a hub-centric ring is needed to fill the gap. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs. The Ranger Raptor uses M12x1.5 lug nuts, and wheels are sold without lug nuts unless listed. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Alloys Rebound PRO is a 17x8.5 off-road wheel with ICON's patented InnerLock bead retention system, shown here in Satin Black. It uses a 6x5.5 (6x139.7) bolt pattern with a 25mm offset, 5.75in backspacing and a 95.1mm center bore.
Low pressure without the beadlock upkeep. Running lower tire pressures improves ride quality and widens the contact patch, but raises the risk of de-beading under heavy side loads. ICON says traditional beadlock wheels solve that with frequent maintenance, specialty tools and parts, extra rotational mass, and are not legal for on-road use. InnerLock keeps the tire bead secured with a bead retention system and is DOT compliant.
Tested for bead retention. ICON subjected the Rebound PRO to real-world abuse, then had an independent contractor run the FMVSS No. 139 Tire Bead Unseat Resistance Test, modified to 10 psi. ICON reports the machine reached its mechanical limit (over 7,600 lb of load) without de-beading the tire.
Fit and handling. ICON engineered the wheel to maximize caliper clearance and position it for unhindered suspension travel and steering, with backspacing and offset chosen to reduce scrub radius. It is strength tested to a 3,200 lb load rating.
Features
- Size: 17 x 8.5
- Bolt pattern: 6 x 5.5 (6x139.7)
- Offset: 25mm; backspacing 5.75in
- Center bore: 95.1mm
- Finish: Satin Black
- Patented InnerLock bead retention, DOT compliant
- 3,200 lb load rating
Fitment: ICON publishes this wheel as 17 x 8.5, 6x5.5 with a 25mm offset and 5.75in backspacing and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor, the only Raptor that uses a 6x139.7 bolt pattern and a 93.1mm center bore. This wheel's 95.1mm bore is larger than the hub, so a hub-centric ring is needed to fill the gap. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs. The Ranger Raptor uses M12x1.5 lug nuts, and wheels are sold without lug nuts unless listed. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Alloys Rebound PRO is a 17x8.5 off-road wheel with ICON's patented InnerLock bead retention system, shown here in Titanium. It uses a 6x5.5 (6x139.7) bolt pattern with a 0mm offset, 4.75in backspacing and a 106.1mm center bore.
Low pressure without the beadlock upkeep. Running lower tire pressures improves ride quality and widens the contact patch, but raises the risk of de-beading under heavy side loads. ICON says traditional beadlock wheels solve that with frequent maintenance, specialty tools and parts, extra rotational mass, and are not legal for on-road use. InnerLock keeps the tire bead secured with a bead retention system and is DOT compliant.
Tested for bead retention. ICON subjected the Rebound PRO to real-world abuse, then had an independent contractor run the FMVSS No. 139 Tire Bead Unseat Resistance Test, modified to 10 psi. ICON reports the machine reached its mechanical limit (over 7,600 lb of load) without de-beading the tire.
Fit and handling. ICON engineered the wheel to maximize caliper clearance and position it for unhindered suspension travel and steering, with backspacing and offset chosen to reduce scrub radius. It is strength tested to a 3,200 lb load rating.
Features
- Size: 17 x 8.5
- Bolt pattern: 6 x 5.5 (6x139.7)
- Offset: 0mm; backspacing 4.75in
- Center bore: 106.1mm
- Finish: Titanium
- Patented InnerLock bead retention, DOT compliant
- 3,200 lb load rating
Fitment: ICON publishes this wheel as 17 x 8.5, 6x5.5 with a 0mm offset and 4.75in backspacing and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor, the only Raptor that uses a 6x139.7 bolt pattern and a 93.1mm center bore. This wheel's 106.1mm bore is larger than the hub, so a hub-centric ring is needed to fill the gap. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs. The Ranger Raptor uses M12x1.5 lug nuts, and wheels are sold without lug nuts unless listed. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Alloys Rebound PRO is a 17x8.5 off-road wheel with ICON's patented InnerLock bead retention system, shown here in Satin Black. It uses a 6x5.5 (6x139.7) bolt pattern with a 0mm offset, 4.75in backspacing and a 106.1mm center bore.
Low pressure without the beadlock upkeep. Running lower tire pressures improves ride quality and widens the contact patch, but raises the risk of de-beading under heavy side loads. ICON says traditional beadlock wheels solve that with frequent maintenance, specialty tools and parts, extra rotational mass, and are not legal for on-road use. InnerLock keeps the tire bead secured with a bead retention system and is DOT compliant.
Tested for bead retention. ICON subjected the Rebound PRO to real-world abuse, then had an independent contractor run the FMVSS No. 139 Tire Bead Unseat Resistance Test, modified to 10 psi. ICON reports the machine reached its mechanical limit (over 7,600 lb of load) without de-beading the tire.
Fit and handling. ICON engineered the wheel to maximize caliper clearance and position it for unhindered suspension travel and steering, with backspacing and offset chosen to reduce scrub radius. It is strength tested to a 3,200 lb load rating.
Features
- Size: 17 x 8.5
- Bolt pattern: 6 x 5.5 (6x139.7)
- Offset: 0mm; backspacing 4.75in
- Center bore: 106.1mm
- Finish: Satin Black
- Patented InnerLock bead retention, DOT compliant
- 3,200 lb load rating
Fitment: ICON publishes this wheel as 17 x 8.5, 6x5.5 with a 0mm offset and 4.75in backspacing and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor, the only Raptor that uses a 6x139.7 bolt pattern and a 93.1mm center bore. This wheel's 106.1mm bore is larger than the hub, so a hub-centric ring is needed to fill the gap. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs. The Ranger Raptor uses M12x1.5 lug nuts, and wheels are sold without lug nuts unless listed. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Alloys Rebound PRO is a 17x8.5 off-road wheel with ICON's patented InnerLock bead retention system, shown here in Bronze. It uses a 6x5.5 (6x139.7) bolt pattern with a 0mm offset, 4.75in backspacing and a 106.1mm center bore.
Low pressure without the beadlock upkeep. Running lower tire pressures improves ride quality and widens the contact patch, but raises the risk of de-beading under heavy side loads. ICON says traditional beadlock wheels solve that with frequent maintenance, specialty tools and parts, extra rotational mass, and are not legal for on-road use. InnerLock keeps the tire bead secured with a bead retention system and is DOT compliant.
Tested for bead retention. ICON subjected the Rebound PRO to real-world abuse, then had an independent contractor run the FMVSS No. 139 Tire Bead Unseat Resistance Test, modified to 10 psi. ICON reports the machine reached its mechanical limit (over 7,600 lb of load) without de-beading the tire.
Fit and handling. ICON engineered the wheel to maximize caliper clearance and position it for unhindered suspension travel and steering, with backspacing and offset chosen to reduce scrub radius. It is strength tested to a 3,200 lb load rating.
Features
- Size: 17 x 8.5
- Bolt pattern: 6 x 5.5 (6x139.7)
- Offset: 0mm; backspacing 4.75in
- Center bore: 106.1mm
- Finish: Bronze
- Patented InnerLock bead retention, DOT compliant
- 3,200 lb load rating
Fitment: ICON publishes this wheel as 17 x 8.5, 6x5.5 with a 0mm offset and 4.75in backspacing and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor, the only Raptor that uses a 6x139.7 bolt pattern and a 93.1mm center bore. This wheel's 106.1mm bore is larger than the hub, so a hub-centric ring is needed to fill the gap. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs. The Ranger Raptor uses M12x1.5 lug nuts, and wheels are sold without lug nuts unless listed. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Alloys Compression is an 18x9 wheel with sharp lines and a concave spoke design, finished in Double Black. ICON sizes its wheels to suit trucks, Jeeps and SUVs, and this one is built on a 6x5.5 (6x139.7) bolt pattern with a 25mm offset, 6in backspacing and a 95.1mm center bore.
Built around fit and clearance. ICON says the Compression is engineered to maximize caliper clearance and position the wheel for unhindered suspension travel and steering.
Backspace and offset set for handling. ICON developed the backspacing and offset to reduce scrub radius, which it says improves overall handling and ride quality.
Features
- Size: 18 x 9
- Bolt pattern: 6 x 5.5 (6x139.7)
- Offset: 25mm
- Backspacing: 6in
- Center bore: 95.1mm
- Finish: Double Black
- Load rating: 2,750 lb per ICON's wheel table
- Aluminum alloy construction
Fitment: ICON publishes this wheel as 18 x 9, 6x5.5 with a 25mm offset and 6in backspacing and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor, the only Raptor that uses a 6x139.7 bolt pattern and a 93.1mm center bore. This wheel's 95.1mm bore is larger than the hub, so a hub-centric ring is needed to fill the gap. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs. The Ranger Raptor uses M12x1.5 lug nuts, and wheels are sold without lug nuts unless listed. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Compression 18x9 in double black is a 6x5.5 (6x139.7) wheel from ICON Alloys with a 0mm offset, 5in backspacing and a 106.1 mm center bore. It is listed here for the 2024-2026 Ford Ranger Raptor, the Raptor that uses a 6x139.7 bolt pattern.
Built for the larger size. ICON added the 18x9 size to its Compression line for trucks, Jeeps and SUVs, with application-specific fitment dimensions. Its backspacing is chosen for better wheel fitment, maximized caliper clearance, reduced scrub radius and unhindered suspension travel.
Strength for hard use. The wheel is made from a high-strength aluminum alloy. ICON gives the 18x9 Compression a 2,750-pound load rating and says it is built for hard-core off-road excursions and heavy towing and hauling duty.
Know before you order. Ford lists 17 inch factory wheels on the Ranger Raptor, so this 18 inch wheel needs tires sized for an 18 inch rim. The 106.1 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so hub-centric rings are needed to center the wheel. The Ranger Raptor uses M12x1.5 lug nuts, and ICON's page does not list lug nuts with this wheel, so order them separately.
Features
- 18x9 size with a 6x5.5 (6x139.7) bolt pattern
- 0mm offset and 5in backspacing
- 106.1 mm center bore
- Double Black finish
- High-strength aluminum alloy, 2,750 lb load rating (ICON, 18x9)
- Backspacing set to maximize caliper clearance and reduce scrub radius
Fitment: ICON publishes this wheel as 18x9, 6x5.5 with a 0mm offset and 5in backspacing and does not name vehicles. It is listed for the Ranger Raptor, the Raptor that uses a 6x139.7 (6x5.5) bolt pattern with a 93.1 mm hub; the 106.1 mm bore comes from the supplier listing and is larger than the hub. Fitment was decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs. It is not listed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use 6x135.
Offset note: This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Compression 17x8.5 in titanium is a 6x5.5 (6x139.7) wheel from ICON Alloys with a 25mm offset, 5.75in backspacing and a 95.1 mm center bore. It is listed here for the 2024-2026 Ford Ranger Raptor, the Raptor that uses a 6x139.7 bolt pattern.
Styling with a purpose. ICON describes the Compression as combining sharp lines, a concave spoke design and "ICON-optimized" dimensions to improve both the form and the function of a Jeep, truck or SUV.
Dimensions tuned for the suspension. ICON engineered the Compression to maximize caliper clearance and optimize wheel position for unhindered suspension travel and steering function. Backspacing and offset were set to reduce scrub radius, which ICON says improves handling and ride quality.
Know before you order. The 95.1 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so hub-centric rings are needed to center the wheel. The Ranger Raptor uses M12x1.5 lug nuts, and ICON's page does not list lug nuts with this wheel, so order them separately.
Features
- 17x8.5 size with a 6x5.5 (6x139.7) bolt pattern
- 25mm offset and 5.75in backspacing
- 95.1 mm center bore
- Titanium finish
- Concave spoke design with ICON-optimized dimensions
- Backspacing set to maximize caliper clearance and reduce scrub radius
Fitment: ICON publishes this wheel as 17x8.5, 6x5.5 with a 25mm offset and 5.75in backspacing and does not name vehicles. It is listed for the Ranger Raptor, the Raptor that uses a 6x139.7 (6x5.5) bolt pattern with a 93.1 mm hub; the 95.1 mm bore comes from the supplier listing and is larger than the hub. Fitment was decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs. It is not listed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use 6x135.
Offset note: This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Compression 17x8.5 in bronze is a 6x5.5 (6x139.7) wheel from ICON Alloys with a 25mm offset, 5.75in backspacing and a 95.1 mm center bore. It is listed here for the 2024-2026 Ford Ranger Raptor, the Raptor that uses a 6x139.7 bolt pattern.
Styling with a purpose. ICON describes the Compression as combining sharp lines, a concave spoke design and "ICON-optimized" dimensions to improve both the form and the function of a Jeep, truck or SUV.
Dimensions tuned for the suspension. ICON engineered the Compression to maximize caliper clearance and optimize wheel position for unhindered suspension travel and steering function. Backspacing and offset were set to reduce scrub radius, which ICON says improves handling and ride quality.
Know before you order. The 95.1 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so hub-centric rings are needed to center the wheel. The Ranger Raptor uses M12x1.5 lug nuts, and ICON's page does not list lug nuts with this wheel, so order them separately.
Features
- 17x8.5 size with a 6x5.5 (6x139.7) bolt pattern
- 25mm offset and 5.75in backspacing
- 95.1 mm center bore
- Bronze finish
- Concave spoke design with ICON-optimized dimensions
- Backspacing set to maximize caliper clearance and reduce scrub radius
Fitment: ICON publishes this wheel as 17x8.5, 6x5.5 with a 25mm offset and 5.75in backspacing and does not name vehicles. It is listed for the Ranger Raptor, the Raptor that uses a 6x139.7 (6x5.5) bolt pattern with a 93.1 mm hub; the 95.1 mm bore comes from the supplier listing and is larger than the hub. Fitment was decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs. It is not listed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use 6x135.
Offset note: This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Compression 17x8.5 in titanium is a 6x5.5 (6x139.7) wheel from ICON Alloys with a 0mm offset, 4.75in backspacing and a 106.1 mm center bore. It is listed here for the 2024-2026 Ford Ranger Raptor, the Raptor that uses a 6x139.7 bolt pattern.
Styling with a purpose. ICON describes the Compression as combining sharp lines, a concave spoke design and "ICON-optimized" dimensions to improve both the form and the function of a Jeep, truck or SUV.
Dimensions tuned for the suspension. ICON engineered the Compression to maximize caliper clearance and optimize wheel position for unhindered suspension travel and steering function. Backspacing and offset were set to reduce scrub radius, which ICON says improves handling and ride quality.
Know before you order. The 106.1 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so hub-centric rings are needed to center the wheel. The Ranger Raptor uses M12x1.5 lug nuts, and ICON's page does not list lug nuts with this wheel, so order them separately.
Features
- 17x8.5 size with a 6x5.5 (6x139.7) bolt pattern
- 0mm offset and 4.75in backspacing
- 106.1 mm center bore
- Titanium finish
- Concave spoke design with ICON-optimized dimensions
- Backspacing set to maximize caliper clearance and reduce scrub radius
Fitment: ICON publishes this wheel as 17x8.5, 6x5.5 with a 0mm offset and 4.75in backspacing and does not name vehicles. It is listed for the Ranger Raptor, the Raptor that uses a 6x139.7 (6x5.5) bolt pattern with a 93.1 mm hub; the 106.1 mm bore comes from the supplier listing and is larger than the hub. Fitment was decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs. It is not listed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use 6x135.
Offset note: This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Compression 17x8.5 in bronze is a 6x5.5 (6x139.7) wheel from ICON Alloys with a 0mm offset, 4.75in backspacing and a 106.1 mm center bore. It is listed here for the 2024-2026 Ford Ranger Raptor, the Raptor that uses a 6x139.7 bolt pattern.
Styling with a purpose. ICON describes the Compression as combining sharp lines, a concave spoke design and "ICON-optimized" dimensions to improve both the form and the function of a Jeep, truck or SUV.
Dimensions tuned for the suspension. ICON engineered the Compression to maximize caliper clearance and optimize wheel position for unhindered suspension travel and steering function. Backspacing and offset were set to reduce scrub radius, which ICON says improves handling and ride quality.
Know before you order. The 106.1 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so hub-centric rings are needed to center the wheel. The Ranger Raptor uses M12x1.5 lug nuts, and ICON's page does not list lug nuts with this wheel, so order them separately.
Features
- 17x8.5 size with a 6x5.5 (6x139.7) bolt pattern
- 0mm offset and 4.75in backspacing
- 106.1 mm center bore
- Bronze finish
- Concave spoke design with ICON-optimized dimensions
- Backspacing set to maximize caliper clearance and reduce scrub radius
Fitment: ICON publishes this wheel as 17x8.5, 6x5.5 with a 0mm offset and 4.75in backspacing and does not name vehicles. It is listed for the Ranger Raptor, the Raptor that uses a 6x139.7 (6x5.5) bolt pattern with a 93.1 mm hub; the 106.1 mm bore comes from the supplier listing and is larger than the hub. Fitment was decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs. It is not listed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use 6x135.
Offset note: This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Compression 17x8.5 in bronze is a 6x135 wheel from ICON Alloys with a 6mm offset, 5in backspacing and an 87.1 mm center bore. It is listed here for the Ford Raptor models that use a 6x135 bolt pattern: the 2017-2026 F-150 Raptor, the 2023-2026 F-150 Raptor R and the 2022-2026 Bronco Raptor.
Styling with a purpose. ICON describes the Compression as combining sharp lines, a concave spoke design and "ICON-optimized" dimensions to improve both the form and the function of a Jeep, truck or SUV.
Dimensions tuned for the suspension. ICON engineered the Compression to maximize caliper clearance and optimize wheel position for unhindered suspension travel and steering function. Backspacing and offset were set to reduce scrub radius, which ICON says improves handling and ride quality.
Hub fit. The 87.1 mm center bore matches the 87.1 mm hub listed for these Raptors, so the wheel centers on the hub without rings. These Raptors use M14x1.5 lug nuts, and ICON's page does not list lug nuts with this wheel, so order them separately.
Features
- 17x8.5 size with a 6x135 bolt pattern
- 6mm offset and 5in backspacing
- 87.1 mm center bore
- Bronze finish
- Concave spoke design with ICON-optimized dimensions
- Backspacing set to maximize caliper clearance and reduce scrub radius
Fitment: ICON publishes this wheel as 17x8.5, 6x135 with a 6mm offset and 5in backspacing and does not name vehicles. It is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore or larger; the 87.1 mm bore comes from the supplier listing. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs (6x135, 87.1 mm). It is not listed for the Ranger Raptor, which uses 6x139.7.
Offset note: This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
The ICON Rebound SLX 17x8.5 in satin black is a 6x5.5 (6x139.7) wheel from ICON Alloys with a 25mm offset, 5.75in backspacing and a 95.1 mm center bore. It is listed here for the 2024-2026 Ford Ranger Raptor, the Raptor that uses a 6x139.7 bolt pattern.
Classic Rebound look, smooth lip. The Rebound SLX keeps the sharp lines, concave 8-spoke design and "ICON-optimized" styling of the classic Rebound but adds a smooth lip. ICON offers it in Satin Black and Charcoal.
Dimensions tuned for the suspension. ICON engineered the wheel to maximize caliper clearance and optimize wheel position for unhindered suspension travel and steering function. Backspacing and offset were set to reduce scrub radius, which ICON says improves handling and ride quality.
Strength tested. ICON strength tested the Rebound SLX to a 3,200-pound load rating and calls it one of the strongest wheel options on the market.
Know before you order. The 95.1 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so hub-centric rings are needed to center the wheel. The Ranger Raptor uses M12x1.5 lug nuts, and ICON's page does not list lug nuts with this wheel, so order them separately.
Features
- 17x8.5 size with a 6x5.5 (6x139.7) bolt pattern
- 25mm offset and 5.75in backspacing
- 95.1 mm center bore
- Satin Black finish
- Smooth lip, 8-spoke design, 3,200 lb load rating (ICON)
- Backspacing set to maximize caliper clearance and reduce scrub radius
Fitment: ICON publishes this wheel as 17x8.5, 6x5.5 with a 25mm offset and 5.75in backspacing and does not name vehicles. It is listed for the Ranger Raptor, the Raptor that uses a 6x139.7 (6x5.5) bolt pattern with a 93.1 mm hub; the 95.1 mm bore comes from the supplier listing and is larger than the hub. Fitment was decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs. It is not listed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use 6x135.
Offset note: This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Rebound SLX 17x8.5 in satin black is a 6x5.5 (6x139.7) wheel from ICON Alloys with a 0mm offset, 4.75in backspacing and a 106.1 mm center bore. It is listed here for the 2024-2026 Ford Ranger Raptor, the Raptor that uses a 6x139.7 bolt pattern.
Classic Rebound look, smooth lip. The Rebound SLX keeps the sharp lines, concave 8-spoke design and "ICON-optimized" styling of the classic Rebound but adds a smooth lip. ICON offers it in Satin Black and Charcoal.
Dimensions tuned for the suspension. ICON engineered the wheel to maximize caliper clearance and optimize wheel position for unhindered suspension travel and steering function. Backspacing and offset were set to reduce scrub radius, which ICON says improves handling and ride quality.
Strength tested. ICON strength tested the Rebound SLX to a 3,200-pound load rating and calls it one of the strongest wheel options on the market.
Know before you order. The 106.1 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so hub-centric rings are needed to center the wheel. The Ranger Raptor uses M12x1.5 lug nuts, and ICON's page does not list lug nuts with this wheel, so order them separately.
Features
- 17x8.5 size with a 6x5.5 (6x139.7) bolt pattern
- 0mm offset and 4.75in backspacing
- 106.1 mm center bore
- Satin Black finish
- Smooth lip, 8-spoke design, 3,200 lb load rating (ICON)
- Backspacing set to maximize caliper clearance and reduce scrub radius
Fitment: ICON publishes this wheel as 17x8.5, 6x5.5 with a 0mm offset and 4.75in backspacing and does not name vehicles. It is listed for the Ranger Raptor, the Raptor that uses a 6x139.7 (6x5.5) bolt pattern with a 93.1 mm hub; the 106.1 mm bore comes from the supplier listing and is larger than the hub. Fitment was decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs. It is not listed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use 6x135.
Offset note: This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Rebound 18x9 in bronze is a 6x5.5 (6x139.7) wheel from ICON Alloys with a 25mm offset, 6in backspacing and a 95.1 mm center bore. It is listed here for the 2024-2026 Ford Ranger Raptor, the Raptor that uses a 6x139.7 bolt pattern.
Built for the larger size. ICON added the 18x9 size to its Rebound line for midsize, full-size and heavy-duty pickups, with application-specific fitment dimensions. Its backspacing is chosen for better wheel fitment, maximized caliper clearance, reduced scrub radius and unhindered suspension travel.
Strength for trail and tow duty. The wheel is made from a high-strength aluminum alloy. ICON gives the six-lug 18x9 Rebound a 2,750-pound load rating and says it is built for off-road excursions and towing and hauling duty.
Know before you order. Ford lists 17 inch factory wheels on the Ranger Raptor, so this 18 inch wheel needs tires sized for an 18 inch rim. The 95.1 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so hub-centric rings are needed to center the wheel. The Ranger Raptor uses M12x1.5 lug nuts, and ICON's page does not list lug nuts with this wheel, so order them separately.
Features
- 18x9 size with a 6x5.5 (6x139.7) bolt pattern
- 25mm offset and 6in backspacing
- 95.1 mm center bore
- Bronze finish
- High-strength aluminum alloy, 2,750 lb load rating (ICON, 18x9)
- Backspacing set to maximize caliper clearance and reduce scrub radius
Fitment: ICON publishes this wheel as 18x9, 6x5.5 with a 25mm offset and 6in backspacing and does not name vehicles. It is listed for the Ranger Raptor, the Raptor that uses a 6x139.7 (6x5.5) bolt pattern with a 93.1 mm hub; the 95.1 mm bore comes from the supplier listing and is larger than the hub. Fitment was decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs. It is not listed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use 6x135.
Offset note: This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Rebound 18x9 in satin black is a 6x5.5 (6x139.7) wheel from ICON Alloys with a 0mm offset, 5in backspacing and a 106.1 mm center bore. It is listed here for the 2024-2026 Ford Ranger Raptor, the Raptor that uses a 6x139.7 bolt pattern.
Built for the larger size. ICON added the 18x9 size to its Rebound line for midsize, full-size and heavy-duty pickups, with application-specific fitment dimensions. Its backspacing is chosen for better wheel fitment, maximized caliper clearance, reduced scrub radius and unhindered suspension travel.
Strength for trail and tow duty. The wheel is made from a high-strength aluminum alloy. ICON gives the six-lug 18x9 Rebound a 2,750-pound load rating and says it is built for off-road excursions and towing and hauling duty.
Know before you order. Ford lists 17 inch factory wheels on the Ranger Raptor, so this 18 inch wheel needs tires sized for an 18 inch rim. The 106.1 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so hub-centric rings are needed to center the wheel. The Ranger Raptor uses M12x1.5 lug nuts, and ICON's page does not list lug nuts with this wheel, so order them separately.
Features
- 18x9 size with a 6x5.5 (6x139.7) bolt pattern
- 0mm offset and 5in backspacing
- 106.1 mm center bore
- Satin Black finish
- High-strength aluminum alloy, 2,750 lb load rating (ICON, 18x9)
- Backspacing set to maximize caliper clearance and reduce scrub radius
Fitment: ICON publishes this wheel as 18x9, 6x5.5 with a 0mm offset and 5in backspacing and does not name vehicles. It is listed for the Ranger Raptor, the Raptor that uses a 6x139.7 (6x5.5) bolt pattern with a 93.1 mm hub; the 106.1 mm bore comes from the supplier listing and is larger than the hub. Fitment was decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs. It is not listed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use 6x135.
Offset note: This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Rebound 18x9 wheel in double black pairs a concave eight-spoke design with ICON-optimized dimensions. This listing is the 18 x 9, 6x5.5 bolt pattern, 0mm offset version with 5in of backspacing and a 106.1mm center bore. It is listed here for the Ranger Raptor.
Built around ICON-optimized dimensions. ICON says the Rebound is engineered to maximize brake caliper clearance and to position the wheel for unhindered suspension travel and steering. Its backspacing and offset are set to reduce scrub radius, which ICON ties to better handling and ride quality, and it is meant to complement an ICON Vehicle Dynamics suspension system.
Aluminum alloy construction. ICON describes the Rebound as aluminum alloy construction with strength properties well suited to off-road use, and says the reduced unsprung weight and rotating mass improve on- and off-road performance.
Load rating. ICON states that its 18x9 Rebound in the six-lug pattern carries a 2,750-pound load rating and is made from high-strength aluminum alloy for off-road trips and towing or hauling duty.
Specifications (as published by ICON).
- Size: 18x9
- Bolt pattern: 6x5.5
- Offset: 0mm
- Backspacing: 5in
- Center bore: 106.1mm
- Finish: Double Black
- ICON part number: 1818908350DB
Features
- Concave eight-spoke Rebound design in double black
- Aluminum alloy construction suited to off-road use
- Reduced unsprung weight and rotating mass for better on- and off-road performance
- Application-specific dimensions to optimize vehicle dynamics and tire clearance
Fitment: ICON publishes this wheel as 18 x 9, 6x5.5 with a 0mm offset and 5in backspacing and does not name vehicles. The 6x5.5 pattern (6x139.7) is used by the Ford Ranger Raptor, whose hub bore is 93.1 mm, so this wheel is listed for the 2024-2026 Ranger Raptor only. It is not a fit for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use a 6x135 pattern. Because this wheel's 106.1mm bore is larger than the Ranger Raptor hub, hub-centric rings are used to center it. The Ranger Raptor lug thread is M12x1.5, and lug nuts are not listed with this wheel. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Rebound 18x9 wheel in double black pairs a concave eight-spoke design with ICON-optimized dimensions. This listing is the 18 x 9, 6x135 bolt pattern, 6mm offset version with 5.25in of backspacing and an 87.1mm center bore. It is listed here for the F-150 Raptor, Raptor R and Bronco Raptor.
Built around ICON-optimized dimensions. ICON says the Rebound is engineered to maximize brake caliper clearance and to position the wheel for unhindered suspension travel and steering. Its backspacing and offset are set to reduce scrub radius, which ICON ties to better handling and ride quality, and it is meant to complement an ICON Vehicle Dynamics suspension system.
Aluminum alloy construction. ICON describes the Rebound as aluminum alloy construction with strength properties well suited to off-road use, and says the reduced unsprung weight and rotating mass improve on- and off-road performance.
Specifications (as published by ICON).
- Size: 18x9
- Bolt pattern: 6x135
- Offset: 6mm
- Backspacing: 5.25in
- Center bore: 87.1mm
- Finish: Double Black
- ICON part number: 1818906352DB
Features
- Concave eight-spoke Rebound design in double black
- Aluminum alloy construction suited to off-road use
- Reduced unsprung weight and rotating mass for better on- and off-road performance
- Application-specific dimensions to optimize vehicle dynamics and tire clearance
Fitment: ICON publishes this wheel as 18 x 9, 6x135 with a 6mm offset and 5.25in backspacing and does not name vehicles. It is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore or larger: the 2017-2026 F-150 Raptor, the 2023-2026 F-150 Raptor R and the 2022-2026 Bronco Raptor. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs. This wheel's 87.1mm bore matches that 87.1 mm hub. The lug thread on these trucks is M14x1.5, and lug nuts are not listed with this wheel.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
The ICON Rebound 17x8.5 wheel in double black pairs a concave eight-spoke design with ICON-optimized dimensions. This listing is the 17 x 8.5, 6x5.5 bolt pattern, 25mm offset version with 5.75in of backspacing and a 95.1mm center bore. It is listed here for the Ranger Raptor.
Built around ICON-optimized dimensions. ICON says the Rebound is engineered to maximize brake caliper clearance and to position the wheel for unhindered suspension travel and steering. Its backspacing and offset are set to reduce scrub radius, which ICON ties to better handling and ride quality, and it is meant to complement an ICON Vehicle Dynamics suspension system.
Aluminum alloy construction. ICON describes the Rebound as aluminum alloy construction with strength properties well suited to off-road use, and says the reduced unsprung weight and rotating mass improve on- and off-road performance.
Specifications (as published by ICON).
- Size: 17x8.5
- Bolt pattern: 6x5.5
- Offset: 25mm
- Backspacing: 5.75in
- Center bore: 95.1mm
- Finish: Double Black
- ICON part number: 1817859057DB
Features
- Concave eight-spoke Rebound design in double black
- Aluminum alloy construction suited to off-road use
- Reduced unsprung weight and rotating mass for better on- and off-road performance
- Application-specific dimensions to optimize vehicle dynamics and tire clearance
Fitment: ICON publishes this wheel as 17 x 8.5, 6x5.5 with a 25mm offset and 5.75in backspacing and does not name vehicles. The 6x5.5 pattern (6x139.7) is used by the Ford Ranger Raptor, whose hub bore is 93.1 mm, so this wheel is listed for the 2024-2026 Ranger Raptor only. It is not a fit for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use a 6x135 pattern. Because this wheel's 95.1mm bore is larger than the Ranger Raptor hub, hub-centric rings are used to center it. The Ranger Raptor lug thread is M12x1.5, and lug nuts are not listed with this wheel. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Rebound 17x8.5 wheel in bronze pairs a concave eight-spoke design with ICON-optimized dimensions. This listing is the 17 x 8.5, 6x5.5 bolt pattern, 25mm offset version with 5.75in of backspacing and a 95.1mm center bore. It is listed here for the Ranger Raptor.
Built around ICON-optimized dimensions. ICON says the Rebound is engineered to maximize brake caliper clearance and to position the wheel for unhindered suspension travel and steering. Its backspacing and offset are set to reduce scrub radius, which ICON ties to better handling and ride quality, and it is meant to complement an ICON Vehicle Dynamics suspension system.
Aluminum alloy construction. ICON describes the Rebound as aluminum alloy construction with strength properties well suited to off-road use, and says the reduced unsprung weight and rotating mass improve on- and off-road performance.
Specifications (as published by ICON).
- Size: 17x8.5
- Bolt pattern: 6x5.5
- Offset: 25mm
- Backspacing: 5.75in
- Center bore: 95.1mm
- Finish: Bronze
- ICON part number: 1817859057BR
Features
- Concave eight-spoke Rebound design in bronze
- Aluminum alloy construction suited to off-road use
- Reduced unsprung weight and rotating mass for better on- and off-road performance
- Application-specific dimensions to optimize vehicle dynamics and tire clearance
Fitment: ICON publishes this wheel as 17 x 8.5, 6x5.5 with a 25mm offset and 5.75in backspacing and does not name vehicles. The 6x5.5 pattern (6x139.7) is used by the Ford Ranger Raptor, whose hub bore is 93.1 mm, so this wheel is listed for the 2024-2026 Ranger Raptor only. It is not a fit for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use a 6x135 pattern. Because this wheel's 95.1mm bore is larger than the Ranger Raptor hub, hub-centric rings are used to center it. The Ranger Raptor lug thread is M12x1.5, and lug nuts are not listed with this wheel. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Rebound 17x8.5 wheel in titanium pairs a concave eight-spoke design with ICON-optimized dimensions. This listing is the 17 x 8.5, 6x5.5 bolt pattern, 0mm offset version with 4.75in of backspacing and a 106.1mm center bore. It is listed here for the Ranger Raptor.
Built around ICON-optimized dimensions. ICON says the Rebound is engineered to maximize brake caliper clearance and to position the wheel for unhindered suspension travel and steering. Its backspacing and offset are set to reduce scrub radius, which ICON ties to better handling and ride quality, and it is meant to complement an ICON Vehicle Dynamics suspension system.
Aluminum alloy construction. ICON describes the Rebound as aluminum alloy construction with strength properties well suited to off-road use, and says the reduced unsprung weight and rotating mass improve on- and off-road performance.
Specifications (as published by ICON).
- Size: 17x8.5
- Bolt pattern: 6x5.5
- Offset: 0mm
- Backspacing: 4.75in
- Center bore: 106.1mm
- Finish: Titanium
- ICON part number: 1817858347TT
Features
- Concave eight-spoke Rebound design in titanium
- Aluminum alloy construction suited to off-road use
- Reduced unsprung weight and rotating mass for better on- and off-road performance
- Application-specific dimensions to optimize vehicle dynamics and tire clearance
Fitment: ICON publishes this wheel as 17 x 8.5, 6x5.5 with a 0mm offset and 4.75in backspacing and does not name vehicles. The 6x5.5 pattern (6x139.7) is used by the Ford Ranger Raptor, whose hub bore is 93.1 mm, so this wheel is listed for the 2024-2026 Ranger Raptor only. It is not a fit for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use a 6x135 pattern. Because this wheel's 106.1mm bore is larger than the Ranger Raptor hub, hub-centric rings are used to center it. The Ranger Raptor lug thread is M12x1.5, and lug nuts are not listed with this wheel. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Rebound 17x8.5 wheel in satin black pairs a concave eight-spoke design with ICON-optimized dimensions. This listing is the 17 x 8.5, 6x5.5 bolt pattern, 0mm offset version with 4.75in of backspacing and a 106.1mm center bore. It is listed here for the Ranger Raptor.
Built around ICON-optimized dimensions. ICON says the Rebound is engineered to maximize brake caliper clearance and to position the wheel for unhindered suspension travel and steering. Its backspacing and offset are set to reduce scrub radius, which ICON ties to better handling and ride quality, and it is meant to complement an ICON Vehicle Dynamics suspension system.
Aluminum alloy construction. ICON describes the Rebound as aluminum alloy construction with strength properties well suited to off-road use, and says the reduced unsprung weight and rotating mass improve on- and off-road performance.
Specifications (as published by ICON).
- Size: 17x8.5
- Bolt pattern: 6x5.5
- Offset: 0mm
- Backspacing: 4.75in
- Center bore: 106.1mm
- Finish: Satin Black
- ICON part number: 1817858347SB
Features
- Concave eight-spoke Rebound design in satin black
- Aluminum alloy construction suited to off-road use
- Reduced unsprung weight and rotating mass for better on- and off-road performance
- Application-specific dimensions to optimize vehicle dynamics and tire clearance
Fitment: ICON publishes this wheel as 17 x 8.5, 6x5.5 with a 0mm offset and 4.75in backspacing and does not name vehicles. The 6x5.5 pattern (6x139.7) is used by the Ford Ranger Raptor, whose hub bore is 93.1 mm, so this wheel is listed for the 2024-2026 Ranger Raptor only. It is not a fit for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use a 6x135 pattern. Because this wheel's 106.1mm bore is larger than the Ranger Raptor hub, hub-centric rings are used to center it. The Ranger Raptor lug thread is M12x1.5, and lug nuts are not listed with this wheel. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Rebound 17x8.5 wheel in double black pairs a concave eight-spoke design with ICON-optimized dimensions. This listing is the 17 x 8.5, 6x5.5 bolt pattern, 0mm offset version with 4.75in of backspacing and a 106.1mm center bore. It is listed here for the Ranger Raptor.
Built around ICON-optimized dimensions. ICON says the Rebound is engineered to maximize brake caliper clearance and to position the wheel for unhindered suspension travel and steering. Its backspacing and offset are set to reduce scrub radius, which ICON ties to better handling and ride quality, and it is meant to complement an ICON Vehicle Dynamics suspension system.
Aluminum alloy construction. ICON describes the Rebound as aluminum alloy construction with strength properties well suited to off-road use, and says the reduced unsprung weight and rotating mass improve on- and off-road performance.
Specifications (as published by ICON).
- Size: 17x8.5
- Bolt pattern: 6x5.5
- Offset: 0mm
- Backspacing: 4.75in
- Center bore: 106.1mm
- Finish: Double Black
- ICON part number: 1817858347DB
Features
- Concave eight-spoke Rebound design in double black
- Aluminum alloy construction suited to off-road use
- Reduced unsprung weight and rotating mass for better on- and off-road performance
- Application-specific dimensions to optimize vehicle dynamics and tire clearance
Fitment: ICON publishes this wheel as 17 x 8.5, 6x5.5 with a 0mm offset and 4.75in backspacing and does not name vehicles. The 6x5.5 pattern (6x139.7) is used by the Ford Ranger Raptor, whose hub bore is 93.1 mm, so this wheel is listed for the 2024-2026 Ranger Raptor only. It is not a fit for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use a 6x135 pattern. Because this wheel's 106.1mm bore is larger than the Ranger Raptor hub, hub-centric rings are used to center it. The Ranger Raptor lug thread is M12x1.5, and lug nuts are not listed with this wheel. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Rebound 17x8.5 wheel in bronze pairs a concave eight-spoke design with ICON-optimized dimensions. This listing is the 17 x 8.5, 6x5.5 bolt pattern, 0mm offset version with 4.75in of backspacing and a 106.1mm center bore. It is listed here for the Ranger Raptor.
Built around ICON-optimized dimensions. ICON says the Rebound is engineered to maximize brake caliper clearance and to position the wheel for unhindered suspension travel and steering. Its backspacing and offset are set to reduce scrub radius, which ICON ties to better handling and ride quality, and it is meant to complement an ICON Vehicle Dynamics suspension system.
Aluminum alloy construction. ICON describes the Rebound as aluminum alloy construction with strength properties well suited to off-road use, and says the reduced unsprung weight and rotating mass improve on- and off-road performance.
Specifications (as published by ICON).
- Size: 17x8.5
- Bolt pattern: 6x5.5
- Offset: 0mm
- Backspacing: 4.75in
- Center bore: 106.1mm
- Finish: Bronze
- ICON part number: 1817858347BR
Features
- Concave eight-spoke Rebound design in bronze
- Aluminum alloy construction suited to off-road use
- Reduced unsprung weight and rotating mass for better on- and off-road performance
- Application-specific dimensions to optimize vehicle dynamics and tire clearance
Fitment: ICON publishes this wheel as 17 x 8.5, 6x5.5 with a 0mm offset and 4.75in backspacing and does not name vehicles. The 6x5.5 pattern (6x139.7) is used by the Ford Ranger Raptor, whose hub bore is 93.1 mm, so this wheel is listed for the 2024-2026 Ranger Raptor only. It is not a fit for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use a 6x135 pattern. Because this wheel's 106.1mm bore is larger than the Ranger Raptor hub, hub-centric rings are used to center it. The Ranger Raptor lug thread is M12x1.5, and lug nuts are not listed with this wheel. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Rebound 17x8.5 wheel in bronze pairs a concave eight-spoke design with ICON-optimized dimensions. This listing is the 17 x 8.5, 6x135 bolt pattern, 6mm offset version with 5in of backspacing and an 87.1mm center bore. It is listed here for the F-150 Raptor, Raptor R and Bronco Raptor.
Built around ICON-optimized dimensions. ICON says the Rebound is engineered to maximize brake caliper clearance and to position the wheel for unhindered suspension travel and steering. Its backspacing and offset are set to reduce scrub radius, which ICON ties to better handling and ride quality, and it is meant to complement an ICON Vehicle Dynamics suspension system.
Aluminum alloy construction. ICON describes the Rebound as aluminum alloy construction with strength properties well suited to off-road use, and says the reduced unsprung weight and rotating mass improve on- and off-road performance.
Specifications (as published by ICON).
- Size: 17x8.5
- Bolt pattern: 6x135
- Offset: 6mm
- Backspacing: 5in
- Center bore: 87.1mm
- Finish: Bronze
- ICON part number: 1817856350BR
Features
- Concave eight-spoke Rebound design in bronze
- Aluminum alloy construction suited to off-road use
- Reduced unsprung weight and rotating mass for better on- and off-road performance
- Application-specific dimensions to optimize vehicle dynamics and tire clearance
Fitment: ICON publishes this wheel as 17 x 8.5, 6x135 with a 6mm offset and 5in backspacing and does not name vehicles. It is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore or larger: the 2017-2026 F-150 Raptor, the 2023-2026 F-150 Raptor R and the 2022-2026 Bronco Raptor. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs. This wheel's 87.1mm bore matches that 87.1 mm hub. The lug thread on these trucks is M14x1.5, and lug nuts are not listed with this wheel.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$600.00
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.