Welcome to RaptorsOnly.com
-
Brands
Shop by brand
- 3D MAXpider
- Access
- Addictive Desert Designs
- Advan
- AEM Induction
- aFe
- Air Lift
- Airaid
- Alcon
- AlphaRex
- AMP Research
- AMS
- Anderson Composites
- ANZO
- ARB
- Atturo Tire
- AutoMeter
- AVS
- AWE Tuning
- BackRack
- Baer Brakes
- Baja Designs
- BAK
- Banks Power
- BBK
- BBS
- BD Diesel
- Belltech
- Bestop
- BFGoodrich
- BMC
- Body Armor 4x4
- Borla
- Brembo
- Brembo OE
- Bully Dog
- Bushwacker
- Camburg
- Clevite
- COBB
- Cometic Gasket
- COMP Cams
- CORSA Performance
- Covercraft
- CSF
- DBA
- DeatschWerks
- DFC
- Diode Dynamics
- DS18
- DV8 Offroad
- Eaton
- EBC
- Eibach
- Enkei
- Extang
- Fabtech
- Fel-Pro
- fifteen52
- Firestone
- Flowmaster
- Ford Racing
- Forgestar
- FORM Lighting
- FOX
- Garrett
- Gates
- GEN-Y Hitch
- Go Fast Bits
- Go Rhino
- Gram Lights
- Granatelli Motor Sports
- GSC Power Division
- Hawk Performance
- Hella
- Hellwig
- Hotchkis
- Husky Liners
- ICON
- Injen
- J&L
- JBA
- JLT
- K&N Engineering
- KC HiLiTES
- King Engine Bearings
- King Shocks
- Kleinn Air Horns
- Kooks Headers
- KYB
- LIQUI MOLY
- LUND
- Magnaflow
- Mahle OE
- Maxtrac
- Mayhem
- MBRP
- McGard
- Method Wheels
- MGP
- Michelin
- Mickey Thompson
- Mishimoto
- Moog
- Motul
- MTX Wheels
- N-Fab
- Nacho Offroad Technology
- NGK
- Nitrous Express
- Odyssey Battery
- ORACLE Lighting
- PowerStop
- Putco
- QA1
- Raceline
- Radium Engineering
- Rally Armor
- Rampage
- Raxiom
- Retrax
- Rhino-Rack
- Ridetech
- Rigid Industries
- Rival 4x4
- RockJock
- Roll-N-Lock
- Roush
- Royal Purple
- SCT Performance
- Skyjacker
- Snow Performance
- SPC Performance
- SPOD
- Stainless Works
- Superlift
- Superpro
- Timbren
- Torque Solution
- TOYO
- Truxedo
- Tuff Country
- Turbosmart
- UMI Performance
- Undercover
- Volant
- Vossen
- Wagner Tuning
- WeatherTech
- Weld
- Westin
- Whiteline
- Wilwood
- Yokohama Tire
- Yukon Gear & Axle
- Zone Offroad
No brands found. Try another name or initial.
156 brands
View all brands -
F-150 Raptor
- F-150 Raptor
-
1st Gen (2010-2014)
-
2nd Gen (2017-2020)
-
3rd Gen (2021-Present)
-
Raptor R (2023-Present)
-
Bronco Raptor
- Bronco Raptor
-
Suspension
-
Lighting
-
Bumpers & Armor
-
Racks
-
Interior Accessories
-
Exterior Accessories
-
Performance
-
Wheels & Tires
-
Brakes
-
Drivetrain
-
Engine & Cooling
-
Ranger Raptor
- Ranger Raptor
-
Suspension
-
Lighting
-
Bumpers & Armor
-
Racks
-
Interior Accessories
-
Exterior Accessories
-
Performance
-
Wheels & Tires
-
Brakes
-
Drivetrain
-
Engine & Cooling
Your cart
Subheading
Product comparison
Describe you product comparison grid
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
Lighting
Choose a type to refine the products below.
4 products
4 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
The MBRP ditch light brackets give you a mounting point for ditch lights on a 2021-2026 Ford F-150 Raptor or a 2023-2026 Raptor R. The kit has both the driver-side and passenger-side brackets in a black-coated steel finish.
Brackets only. MBRP states that lights are not included. The brackets are the foundation for mounting your own ditch lights, so you can choose the light assemblies you prefer.
Black-coated steel. The brackets are black-coated steel for a sleek, dark look.
Both sides in the kit. The kit contains a passenger-side and a driver-side bracket.
Features
- Black-coated steel ditch light brackets
- Kit includes driver-side and passenger-side brackets
- Lights not included
- 1-year MBRP warranty
Emissions: California Proposition 65 warning applies (chromium, nickel). This is not an exhaust or emissions part.
Fitment: 2021-2026 Ford F-150 Raptor and 2023-2026 Ford F-150 Raptor R; MBRP also lists the F-150 trims shown below. Fitment confirmed against MBRP's published application list.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | Police Responder |
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2021-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
$1,167.95
Baja Designs Squadron Sport 2.0 Behind-the-Grille Kit, part number 440016, mounts six Squadron 2.0 Sport LED pods behind the OEM Ford grille for auxiliary lighting while keeping the front end looking factory.
Fitment summary: 2021-2026 Ford F-150 King Ranch, Lariat, Platinum, Police Responder, Raptor, SSV, Tremor, XL, and XLT; 2021-2023 Ford F-150 Limited; 2024-2026 Ford F-150 STX.
This kit uses vehicle-specific steel brackets and a bolt-on layout. Baja Designs says it installs without cutting or drilling factory components. The included main wiring harness and factory upfitter harness are designed to tie into the Ford upfitter switches.
Each Squadron 2.0 Sport pod is a square LED light pod with a 3.29 in height, 3.32 in depth, and 2.84 in length/width. Output is 3,200 raw lumens per pod, for 19,200 raw lumens total. Power draw is 30 watts and 2.2 amps per pod at 13.8V DC, or 180 watts and 13.2 amps total at 13.8V DC.
- Six Squadron 2.0 Sport LED pods: 2 wide cornering clear, 2 driving combo clear, 2 spot clear
- Integrated RGBW backlight with 9 user-selectable color options
- 5000K daylight color temperature
- IP69K ingress protection
- Standard 4-pin Deutsch connector
- Primary operating voltage: 12V-32V DC
- Backlight operating voltage: 11V-14V DC
- Updated second-generation Squadron 2.0 optics with reduced light spill
- Redesigned behind-the-grille steel brackets with increased vertical aiming adjustability
- uService design with clip-in reflectors and a redesigned gasket to prevent pinched O-rings
- MoistureBlock sealing, CopperDrive thermal management, and DirectSink thermal path technology
The kit arrives with the light pods, behind-the-grille brackets, a wiring harness, a factory upfitter wiring harness, and mounting hardware. A 9/16 in socket and wrench are required for pod-to-bracket installation on a 2021+ Ford Raptor.
Baja Designs lists a 30-day money-back satisfaction guarantee and a manufacturer limited lifetime warranty. It is not compatible with adaptive cruise control relocation kits.
This listing preserves the complete manufacturer fitment table for the vehicles named above. The manufacturer also identifies this kit as a LED light pod kit, behind-the-grille kit, with Squadron 2.0 Sport pods and clear lenses.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | Police Responder |
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
$719.08
This add-on light hoop from Addictive Desert Designs bolts onto the ADD PRO Bolt-On front bumper for the Ford F-150 Raptor and gives you room for four more 6-inch round lights. It is made in the USA, and the whole install takes only a handful of minutes.
Four more round lights. The hoop accommodates four 6-inch round LED lights, on top of what the bumper's own center mount carries, for extra reach on dark trails.
Same tubing as the bumper. It is built from the same .120-inch wall steel tubing as the PRO Bolt-On bumper it mounts to, so the styling stays consistent and low-profile.
Stays close to the bumper. The hoop protrudes only 4 inches further than the main tube of the bumper, so it does not push the front of the truck out any more than it has to.
Fully bolt-on. No cutting or welding is needed, and it mounts to the ADD PRO Bolt-On front bumper (F218102070103), which is required.
Features
- Works with the ADD PRO Bolt-On front bumper
- Accommodates four 6 in. round lights
- Protrudes only 4 in. further than the bumper's main tube
- .120 in. wall steel tubing
- Fully bolt-on
- Made in the USA
Fitment: 2021-2026 Ford F-150 Raptor and 2023+ Ford F-150 Raptor R (2023-2026), the vehicles ADD lists for the PRO Bolt-On front bumper this hoop adds to. The hoop's own page text still reads 2021-2023, which looks like an older note, so fitment follows the bumper's listing. Fitment confirmed against Addictive Desert Designs' published application list for the PRO Bolt-On front bumper.
Guides & Manuals
Bumper, Winch Kit, and Light Hoop Install GuideThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$1,715.95
Fits the 2024-2026 Ford F-150 Raptor R and 2024-2026 Ford F-150 Raptor 37.
The Baja Designs 6 XL Linkable Kit is a bumper-mounted auxiliary lighting package built around six XL Sport LED pods. It is designed to follow the bumper line on the Raptor R and Raptor 37 with vehicle-specific brackets, while the linked assembly can be arranged straight or arced to suit the front end.
This kit uses a mix of wide cornering, driving/combo, and spot optics to light multiple zones at once. Baja Designs lists 5000K color temperature, 45 degrees of vertical pitch adjustment, independent horizontal adjustment for each pod, DirectSink thermal management, and uService replaceable lenses and optics. MoistureBlock construction carries an IP69K waterproof rating and is submersible up to 9 feet.
- Part number: 448308
- Included light bar assembly: 1 x 6XL Linkable Light Bar with 6 XL Sport Linkable light pods
- Included brackets: 2 bumper mounting brackets for Raptor R/37
- Included wiring harness: 640163
- Included protection: black rock guard covers
- Included hardware: all necessary mounting hardware
- Switching: wiring supports a toggle switch or OEM factory upfitter switches
Installation is bumper-mounted and uses the included vehicle-specific brackets, pre-crimped and trimmed wiring, and supplied hardware. No additional parts are required. The kit arrives as a complete lighting package with the bar assembly, brackets, harness, covers, and hardware in the box.
Baja Designs notes total forward light output at 18,972 lumens. The linked layout is intended to give the driver flexible forward lighting across multiple terrain zones without needing to piece together separate auxiliary lights.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering.
- Choosing a selection results in a full page refresh.
- Opens in a new window.