Welcome to RaptorsOnly.com
-
Brands
Shop by brand
- 3D MAXpider
- Access
- Addictive Desert Designs
- Advan
- AEM Induction
- aFe
- Air Lift
- Airaid
- Alcon
- AlphaRex
- AMP Research
- AMS
- Anderson Composites
- ANZO
- ARB
- Atturo Tire
- AutoMeter
- AVS
- AWE Tuning
- BackRack
- Baer Brakes
- Baja Designs
- BAK
- Banks Power
- BBK
- BBS
- BD Diesel
- Belltech
- Bestop
- BFGoodrich
- BMC
- Body Armor 4x4
- Borla
- Brembo
- Brembo OE
- Bully Dog
- Bushwacker
- Camburg
- Clevite
- COBB
- Cometic Gasket
- COMP Cams
- CORSA Performance
- Covercraft
- CSF
- DBA
- DeatschWerks
- DFC
- Diode Dynamics
- DS18
- DV8 Offroad
- Eaton
- EBC
- Eibach
- Enkei
- Extang
- Fabtech
- Fel-Pro
- fifteen52
- Firestone
- Flowmaster
- Ford Racing
- Forgestar
- FORM Lighting
- FOX
- Garrett
- Gates
- GEN-Y Hitch
- Go Fast Bits
- Go Rhino
- Gram Lights
- Granatelli Motor Sports
- GSC Power Division
- Hawk Performance
- Hella
- Hellwig
- Hotchkis
- Husky Liners
- ICON
- Injen
- J&L
- JBA
- JLT
- K&N Engineering
- KC HiLiTES
- King Engine Bearings
- King Shocks
- Kleinn Air Horns
- Kooks Headers
- KYB
- LIQUI MOLY
- LUND
- Magnaflow
- Mahle OE
- Maxtrac
- Mayhem
- MBRP
- McGard
- Method Wheels
- MGP
- Michelin
- Mickey Thompson
- Mishimoto
- Moog
- Motul
- MTX Wheels
- N-Fab
- Nacho Offroad Technology
- NGK
- Nitrous Express
- Odyssey Battery
- ORACLE Lighting
- PowerStop
- Putco
- QA1
- Raceline
- Radium Engineering
- Rally Armor
- Rampage
- Raxiom
- Retrax
- Rhino-Rack
- Ridetech
- Rigid Industries
- Rival 4x4
- RockJock
- Roll-N-Lock
- Roush
- Royal Purple
- SCT Performance
- Skyjacker
- Snow Performance
- SPC Performance
- SPOD
- Stainless Works
- Superlift
- Superpro
- Timbren
- Torque Solution
- TOYO
- Truxedo
- Tuff Country
- Turbosmart
- UMI Performance
- Undercover
- Volant
- Vossen
- Wagner Tuning
- WeatherTech
- Weld
- Westin
- Whiteline
- Wilwood
- Yokohama Tire
- Yukon Gear & Axle
- Zone Offroad
No brands found. Try another name or initial.
156 brands
View all brands -
F-150 Raptor
- F-150 Raptor
-
1st Gen (2010-2014)
-
2nd Gen (2017-2020)
-
3rd Gen (2021-Present)
-
Raptor R (2023-Present)
-
Bronco Raptor
- Bronco Raptor
-
Suspension
-
Lighting
-
Bumpers & Armor
-
Racks
-
Interior Accessories
-
Exterior Accessories
-
Performance
-
Wheels & Tires
-
Brakes
-
Drivetrain
-
Engine & Cooling
-
Ranger Raptor
- Ranger Raptor
-
Suspension
-
Lighting
-
Bumpers & Armor
-
Racks
-
Interior Accessories
-
Exterior Accessories
-
Performance
-
Wheels & Tires
-
Brakes
-
Drivetrain
-
Engine & Cooling
Your cart
Subheading
Product comparison
Describe you product comparison grid
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
Suspension
Choose a type to refine the products below.
16 products
16 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$3,799.95
The FOX Factory Race Series 2.5 Live Valve Internal Bypass rear coilover (part 883-06-246) is a bolt-on rear suspension upgrade for the 2024-2026 Ford Ranger Raptor. It keeps the truck's Live Valve electronics in the loop, so the damping is still adjusted for you as the terrain changes, while adding the oil capacity and internal bypass tuning that FOX builds into its race-bred shocks.
Semi-active damping that works with the truck. FOX designed this coilover to plug into the factory electronics, so there is no separate controller to add. Live Valve reads the position of the shock and changes damping force on the fly for a calmer ride on pavement and more control when the pace picks up.
Internal bypass for progressive control. In the middle of the stroke, fluid slips past the main piston through bleed holes, which keeps the ride comfortable. Once the shock travels beyond that ride zone in compression or rebound, the bleed holes close off and fluid is forced through the piston, building force progressively. That helps manage hard bottom-outs, softens harsh top-outs and gives the truck a catch when it lands from a jump.
Built to take heat and pressure. The 2.5-inch aluminum bodies are Type II anodized, which stands up to higher shock pressures and resists corrosion. Finned reservoirs add oil capacity, and an internal floating piston (IFP) inside each reservoir helps prevent cavitation during hard use.
Adjustable ride height. A threaded preload collar lets you fine-tune the ride height to suit your setup. The listing for this part is sold as a 0-1in lift rear coilover.
Features
- FOX Factory Race Series 2.5 Live Valve Internal Bypass design
- Rear coilover for the Ford Ranger Raptor
- Semi-active, position-sensitive damping
- Plug-and-play integration with OEM electronics
- Multiple zones of damping control from the internal bypass
- Type II anodized 2.5-inch aluminum body
- Finned reservoir with IFP to prevent cavitation
- Threaded preload collar for ride height adjustment
Fitment: Ford Ranger Raptor, model years 2024-2026, rear position. Fitment confirmed against FOX's published application list.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$3,999.95
The FOX Factory Race Series 3.2 Live Valve Internal Bypass front coilover (part number 883-06-245) is a bolt-on suspension upgrade for the 2024-2026 Ford Ranger Raptor. It pairs semi-active Live Valve control with FOX's internal bypass damping, so the truck stays composed on pavement and keeps control when the terrain gets rough. The Shopify listing for this part also describes it as a 2-3in lift setup.
Semi-active damping that works with your truck. Live Valve is position-sensitive, adjusting damping on the fly, and the kit plugs into the factory electronics so there is no separate controller to wire up.
Internal bypass for multiple damping zones. Fluid flows past the main piston through bleed holes while the shock is in its ride zone. Once travel moves beyond that zone in compression or rebound, the bleed holes close and fluid is forced through the main piston. The result is a soft, comfortable ride in normal use and progressively more force near the ends of travel, which helps with hard bottom-outs, harsh top-outs and landings.
Built to resist heat, pressure and corrosion. The 3.2-inch aluminum bodies have Type II anodizing to handle higher internal pressure and fend off corrosion. Finned reservoirs add oil capacity and contain an IFP (internal floating piston) to prevent cavitation.
Adjustable ride height. A threaded preload collar lets you fine-tune the stance of your Ranger Raptor.
Features
- FOX Factory Race Series 3.2 Live Valve shocks with Internal Bypass
- Front coilover application
- Semi-active, position-sensitive damping
- Plug-and-play integration with OEM electronics
- Type II anodized 3.2-inch aluminum bodies
- Finned reservoirs with IFP
- Threaded preload collar for ride height adjustment
Fitment: Fits the 2024-2026 Ford Ranger Raptor. Fitment confirmed against FOX's published application list.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
Timbren Suspension Kits (SES Kits) are designed to enhance the suspension of your vehicle. Easiest to use: Rubber cushions absorb road shocks and automatically adjust to uneven loads or road conditions. Easiest to maintain: There are no airlines or fittings to allow leaks. Simply bolt the kit on and you are set for a lifetime of trouble free suspension.Easiest to install: There are no holes to drill, no airlines to route and SES Kits can be installed in a matter of minutes using basic hand tools. The softer ride quality of todays trucks and the mediocre suspensions found on most trailers can cause excessive trailer sway, instability and suspension settling.Timbrens high performance suspension packages will ensure added safety and peace of mind.
Installation Instructions- Eliminate Vehicle Squatting & Sagging
- 100 Day Money Back Guarantee
- Cushion Road Shocks
- Lifetime Warranty
- Improve Handling
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | Bronco | Badlands |
| 2021-2023,2025 | Ford | Bronco | Base |
| 2021-2025 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2025 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2025 | Ford | Bronco | Outer Banks |
| 2022-2025 | Ford | Bronco | Raptor |
| 2025 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
| 2026 | Ford | Ranger | Raptor |
$1,679.95
The FOX 803-35-020 is a black billet aluminum front upper control arm built for the 2024-2026 Ford Ranger Raptor. It replaces the factory upper arm and is designed to keep the truck's alignment in check once the suspension is lifted, while freeing up more downward wheel travel for rough terrain.
Restores alignment after a lift. Raising a vehicle pushes the factory alignment out of specification. FOX engineered this arm around the Ranger Raptor's own suspension geometry so it can correct for that change and keep the front end tracking properly.
More droop and better high-speed manners. The arm is designed to maximize droop travel for added articulation off-road. Extra caster built into the design helps cut down on wander at speed, which makes the truck feel steadier on rough roads and trails.
Built from machined billet. Each arm is CNC machined in the USA from T6061 billet aluminum, then finished with Type II anodizing for corrosion resistance and a laser-etched FOX logo.
Adjustable for fine tuning. Chromoly heim joints let you dial in caster and camber, and a PTFE liner reinforced with Kevlar fiber helps prevent binding while holding up over time.
Bolts on without chassis changes. Stainless-steel taper misalignment spacers and 12-point bolts at the steering knuckle give a precise, secure fit with no modification to the vehicle chassis.
Features
- Black anodized T6061 billet aluminum, CNC machined in the USA
- 3/4 in. chromoly heim joints, fully adjustable for caster and camber
- Kevlar fiber reinforced PTFE liner to prevent binding
- 1.25 in. uniballs with a hard chrome plated ball and low carbon steel race for longer service life
- PTFE liner helps keep noise down for a comfortable ride
- Stainless-steel taper misalignment spacers and 12-point bolts at the knuckle
- Position: front upper
Fitment: FOX lists this arm for the 2024-2026 Ford Ranger Raptor. Fitment confirmed against FOX's published application list.
Guides & Manuals
Installation InstructionsFOX Guide for 803-35-020 / 803-35-021
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$469.99
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Lariat |
| 2024 | Ford | Ranger | Raptor |
| 2024-2026 | Ford | Ranger | XL |
| 2024-2026 | Ford | Ranger | XLT |
$73.07
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | Bronco | Badlands |
| 2021-2023,2025-2026 | Ford | Bronco | Base |
| 2021-2026 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2026 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2026 | Ford | Bronco | Outer Banks |
| 2022-2026 | Ford | Bronco | Raptor |
| 2025-2026 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
| 2019-2026 | Ford | Ranger | Lariat |
| 2024-2026 | Ford | Ranger | Raptor |
| 2019-2026 | Ford | Ranger | XL |
| 2019-2026 | Ford | Ranger | XLT |
If you want a taller, more level front end on your 2024-2025 Ford Ranger Raptor without replacing the factory shocks, this ICON 2.25 inch front coilover spacer kit is a simple way to get there. It bolts in with the original coilover assemblies and adds 2.25 inches of front lift over stock.
Keeps the factory electronic shocks working. ICON designed these spacers to maintain full functionality of the stock electronic shock system, so you keep the Ranger Raptor's original damping behavior while raising the front.
Room for bigger wheels and tires. The added height helps keep oversized tires clear of the front fenders and gives the truck a more aggressive, level stance.
Protects the front suspension. ICON states the kit avoids overextending the stock front upper control arm ball joints and prevents over-cycling of the CV joints as the suspension approaches full extension.
Built from billet aluminum. The spacers are CNC machined from 6061 billet aluminum with a black anodized finish for corrosion resistance, and are covered by ICON's Limited Lifetime Warranty.
Features
- Vehicle specific design for Ford Ranger Raptor equipped with OE front coilovers
- No ball joint over extension or bind with full factory wheel travel
- Increases front ground clearance and provides more level stance
- Maintains functionality of factory electronic shock system
- Keeps oversized tires from interfering with front fenders
- Black anodized finish for excellent corrosion resistance
- Raises front ride height 2.25" over stock
- CNC machined 6061 aluminum components
Fitment: ICON lists this kit for the 2024-2025 Ford Ranger Raptor equipped with the original front coilovers. Fitment confirmed against ICON's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2025 | Ford | Ranger | Raptor |
$1,679.95
The FOX billet upper control arm (part 803-35-021) is a bolt-on front suspension upgrade built specifically for the 2024-2026 Ford Ranger Raptor. It replaces the factory upper arm with a CNC-machined billet aluminum arm that is designed to correct alignment once the truck is lifted and to open up more droop travel for off-road driving.
Alignment correction for a lifted truck. Raising a vehicle pushes the factory alignment out of specification. FOX engineered this arm around the Ranger Raptor's suspension geometry so the added caster brings the truck back in line while leaving room for the suspension to droop and articulate over rough terrain.
More caster for high-speed stability. The extra caster helps reduce steering wander at speed, so the truck tracks straighter and feels more settled on fast dirt roads, washboard and trails.
Fine-tune caster and camber. Fully adjustable 3/4 in. chromoly heim joints let you dial in caster and camber during your alignment, and a Kevlar-reinforced PTFE liner helps prevent binding while keeping the joint precise over time.
Built from billet in the USA. Each arm is CNC machined in the USA from T6061 billet aluminum, finished with Type II anodizing for corrosion resistance, and marked with a laser-etched FOX logo.
Precise, quiet ball joint. The 1.25 in. uniball pairs a hard chrome plated ball with a low carbon steel race for long service life, and its PTFE liner keeps noise down for a comfortable ride.
Straightforward installation. Stainless-steel taper misalignment spacers and 12-point bolts secure the arm at the steering knuckle, and it bolts on without any modification to the vehicle chassis.
Features
- Designed specifically for the 2024-2026 Ford Ranger Raptor front upper position
- CNC machined T6061 billet aluminum with Type II anodized finish
- Fully adjustable 3/4 in. chromoly heim joints for caster and camber
- 1.25 in. hard chrome plated uniball with PTFE liner
- Kevlar-reinforced PTFE liner resists binding
- Stainless-steel taper misalignment spacers and 12-point knuckle bolts
- Bolt-on fit, no chassis modification
- Laser-etched FOX logo, made in the USA
Fitment: FOX lists this upper control arm for the Ford Ranger Raptor, model years 2024-2026, front upper position. Fitment confirmed against FOX's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
Eibach's PRO-TRUCK SPORT SHOCKS' mono-tube design delivers improved control and damping performance on-and-off road.
WarrantyInstallation Instructions
- Performance Shock Absorber - Precision Engineered for Street and Off-Road Performance.
- Monotube-High Pressure Design, Heavy Duty 46mm Piston, Nitro Coated Shaft.
- Durable, Zinc Coated, Weather Resistant Shock Bodies.
- Can accommodate Lifted Suspensions 0-1.5".
- Made in U.S.A.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2025 | Ford | Ranger | Lariat |
| 2025 | Ford | Ranger | Raptor |
| 2024-2025 | Ford | Ranger | XL |
| 2024-2025 | Ford | Ranger | XLT |
Eliminating the need for air bags, spring spacers, or excessive spring rate, HD Rear Springs are ideal for those seeking an drop-in replacement over our standard lift springs to compensate for additional weight over the rear axle. They are designed to maintain a desirable ride height while carrying heavy loads.
WarrantyInstallation Instructions
- Precision Engineered for Improved Off-Road Capability.
- More Fender Clearance for Larger Wheels and Tires.
- Excellent On-Road Stability and Handling.
- Increased Ground Clearance.
- Made in U.S.A.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2025 | Ford | Ranger | Raptor |
Listed rear lift heights range from 0lbs(1st height listed) to 500lbs(2nd height listed). Only recommended to run at fully load height, other heights listed for reference only. Too much lift will cause poor ride quality.
Installation Instructions- Precision Engineered for Improved Off-Road Capability.
- More Fender Clearance for Larger Wheels and Tires.
- Excellent On-Road Stability and Handling.
- Increased Ground Clearance.
- Made in U.S.A.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2025 | Ford | Ranger | Raptor |
Eibach Pro-Lift-Kit springs are designed to provide a suspension lift for your vehicle without the use of coilover systems or spacer lifts. Eibach spring lifts allow full range of suspension travel without additional stress on bushings and ball-joints as seen with spacer lift systems.
WarrantyInstallation Instructions
- Precision Engineered for Improved Off-Road Capability.
- More Fender Clearance for Larger Wheels and Tires.
- Excellent On-Road Stability and Handling.
- Increased Ground Clearance.
- Made in U.S.A.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2025 | Ford | Ranger | Raptor |
- Choosing a selection results in a full page refresh.
- Opens in a new window.