Welcome to RaptorsOnly.com
-
Brands
Shop by brand
- 3D MAXpider
- Access
- Addictive Desert Designs
- Advan
- AEM Induction
- aFe
- Air Lift
- Airaid
- Alcon
- AlphaRex
- AMP Research
- AMS
- Anderson Composites
- ANZO
- ARB
- Atturo Tire
- AutoMeter
- AVS
- AWE Tuning
- BackRack
- Baer Brakes
- Baja Designs
- BAK
- Banks Power
- BBK
- BBS
- BD Diesel
- Belltech
- Bestop
- BFGoodrich
- BMC
- Body Armor 4x4
- Borla
- Brembo
- Brembo OE
- Bully Dog
- Bushwacker
- Camburg
- Clevite
- COBB
- Cometic Gasket
- COMP Cams
- CORSA Performance
- Covercraft
- CSF
- DBA
- DeatschWerks
- DFC
- Diode Dynamics
- DS18
- DV8 Offroad
- Eaton
- EBC
- Eibach
- Enkei
- Extang
- Fabtech
- Fel-Pro
- fifteen52
- Firestone
- Flowmaster
- Ford Racing
- Forgestar
- FORM Lighting
- FOX
- Garrett
- Gates
- GEN-Y Hitch
- Go Fast Bits
- Go Rhino
- Gram Lights
- Granatelli Motor Sports
- GSC Power Division
- Hawk Performance
- Hella
- Hellwig
- Hotchkis
- Husky Liners
- ICON
- Injen
- J&L
- JBA
- JLT
- K&N Engineering
- KC HiLiTES
- King Engine Bearings
- King Shocks
- Kleinn Air Horns
- Kooks Headers
- KYB
- LIQUI MOLY
- LUND
- Magnaflow
- Mahle OE
- Maxtrac
- Mayhem
- MBRP
- McGard
- Method Wheels
- MGP
- Michelin
- Mickey Thompson
- Mishimoto
- Moog
- Motul
- MTX Wheels
- N-Fab
- Nacho Offroad Technology
- NGK
- Nitrous Express
- Odyssey Battery
- ORACLE Lighting
- PowerStop
- Putco
- QA1
- Raceline
- Radium Engineering
- Rally Armor
- Rampage
- Raxiom
- Retrax
- Rhino-Rack
- Ridetech
- Rigid Industries
- Rival 4x4
- RockJock
- Roll-N-Lock
- Roush
- Royal Purple
- SCT Performance
- Skyjacker
- Snow Performance
- SPC Performance
- SPOD
- Stainless Works
- Superlift
- Superpro
- Timbren
- Torque Solution
- TOYO
- Truxedo
- Tuff Country
- Turbosmart
- UMI Performance
- Undercover
- Volant
- Vossen
- Wagner Tuning
- WeatherTech
- Weld
- Westin
- Whiteline
- Wilwood
- Yokohama Tire
- Yukon Gear & Axle
- Zone Offroad
No brands found. Try another name or initial.
156 brands
View all brands -
F-150 Raptor
- F-150 Raptor
-
1st Gen (2010-2014)
-
2nd Gen (2017-2020)
-
3rd Gen (2021-Present)
-
Raptor R (2023-Present)
-
Bronco Raptor
- Bronco Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
-
Ranger Raptor
- Ranger Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
Your cart
Subheading
Product comparison
Describe you product comparison grid
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
Ranger Raptor
Choose a department to narrow the parts below.
Suspension
Lighting
Bumpers & Armor
Racks
Interior Accessories
Exterior Accessories
Performance
Wheels & Tires
Brakes
Drivetrain
Engine & Cooling
247 products
247 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$11.96
These Diode Dynamics 194 HP3 LED bulbs in cool white are a compact, direct replacement for the factory 194 bulb on the 2010-2014 SVT Raptor and the 2017-2020 F-150 Raptor.
Even, factory-style light. A single diffused optic spreads light across the original lamp for an OEM-style look, so you get a clean modern white without hot spots.
About double the output. At 56 lumens of measured output, the HP3 gives roughly twice the light of an original 5W 194 or 168 bulb.
Built to last. Constant-current circuitry and transient suppression prevent flicker and early failure, and dual-lead contacts hold the bulb snug in the socket so it will not vibrate loose.
Where it fits on your Raptor. Diode lists 194 bulbs for the 2010-2014 SVT Raptor sidemarker, license plate and front map lights, and for the 2017-2020 Raptor license plate lights. This pair is the cool white 6000K option.
Features
- 194 size, cool white 6000K
- 56 lumens measured output
- Diffused lens for even spread
- Dual-lead contacts, plug and play
- Constant-current circuitry with transient suppression
- Plug-and-play installation, no splicing
- Backed by Diode Dynamics' three-year replacement warranty
Fitment: 2010-2014 SVT Raptor (sidemarker, license plate and map lights) and 2017-2020 F-150 Raptor (license plate lights). Fitment confirmed against Diode Dynamics' published application list.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2017-2020 | Ford | F-150 | Raptor |
$19.96
194 HP5 LED Features Diffused lens design for even spread Proven performance highly reliable Increased output with LED Appearance Plug and play simple installation Overview Design. The 194 HP5 LED bulb is a high-power LED in a small package. With copper inserts for heat dissipation the total output far exceeds the original bulb with a single diffused optic to spread light evenly. With its dual-lead contacts it will fit snugly in the socket as a direct plug-and-play replacement. Reliability. Unlike other bulbs on the market this bulb is built with constant-current circuitry along with transient suppression. That means this bulb will last for years not months with no flickering or failure. And like every Diode Dynamics product it's backed by an industry-leading three-year replacement warranty. Brightness. At 92 lumens the HP5 will provide about triple the total light compared to your original 5W 194 or 168 sized bulb. This is quite a lot of light especially if you have multiple bulbs installed. If you're not looking for something this bright we recommend its little brother the HP3. Colors. In addition to vibrant colors of blue red amber and green the 194 HP5 is available in a number of white color options. These include a cool white 6000K warm white 3000K a 5000K or pure white and a 4000K or natural white. Whether you want a modern cool white appearance or a traditional warm white color with more output we have the color to fit your need!
Installation Instructions- Molded construction with sturdy double terminals
- Direct replacement for your factory bulb
- Increased output with LED Appearance
- Plug and play simple installation
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2002-2003 | Acura | CL | Base |
| 2001 | Acura | CL | Premium |
| 2001-2003 | Acura | CL | Type-S |
| 2013-2022 | Acura | ILX | Base |
| 2013-2014 | Acura | ILX | Hybrid |
| 1990-1993,1997-2001 | Acura | Integra | GS |
| 1992-2001 | Acura | Integra | GS-R |
| 1986-2001 | Acura | Integra | LS |
| 1987-1988 | Acura | Integra | LS Special Edition |
| 1986-1998 | Acura | Integra | RS |
| 1995-1996 | Acura | Integra | Special Edition |
| 1997-1998,2000-2001 | Acura | Integra | Type R |
| 2001-2013 | Acura | MDX | Base |
| 2001-2006 | Acura | MDX | Touring |
| 1999 | Acura | NSX | Alex Zanardi Edition |
| 1991-2001,2004-2005 | Acura | NSX | Base |
| 1995-2003 | Acura | NSX | T |
| 2007-2018 | Acura | RDX | Base |
| 2010-2012 | Acura | RDX | SH-AWD |
| 2005 | Acura | RL | Base |
| 2000-2004 | Acura | RL | Premium |
| 2014-2019 | Acura | RLX | Base |
| 2014,2016-2019 | Acura | RLX | Sport Hybrid SH-AWD |
| 2002-2006 | Acura | RSX | Base |
| 2002-2006 | Acura | RSX | Type-S |
| 1999-2014 | Acura | TL | Base |
| 2009-2014 | Acura | TL | SH-AWD |
| 2002-2003,2007-2008 | Acura | TL | Type-S |
| 2004-2014 | Acura | TSX | Base |
| 2012-2014 | Acura | TSX | Special Edition |
| 2010-2014 | Acura | TSX | V6 |
| 2010-2013 | Acura | ZDX | Base |
| 2006-2013 | Audi | A3 | Base |
| 2010-2013 | Audi | A3 | TDI |
| 2000-2001,2003-2012 | Audi | A4 | Base |
| 2003-2009 | Audi | A4 | Cabriolet |
| 2010-2012 | Audi | A5 | Cabriolet |
| 2006-2011 | Audi | A6 | Base |
| 2013-2016 | Audi | Q5 | Hybrid Prestige |
| 2009-2019 | Audi | Q5 | Premium |
| 2009-2019 | Audi | Q5 | Premium Plus |
| 2009-2019 | Audi | Q5 | Prestige |
| 2014-2016 | Audi | Q5 | TDI Premium Plus |
| 2016 | Audi | Q5 | TDI Premium Plus S-Line |
| 2014-2016 | Audi | Q5 | TDI Prestige |
| 2016 | Audi | Q5 | TDI Prestige S-Line |
| 2007-2010 | Audi | Q7 | Base |
| 2007-2015 | Audi | Q7 | Premium |
| 2011-2015 | Audi | Q7 | Premium Plus |
| 2010-2015 | Audi | Q7 | Prestige |
| 2009-2010 | Audi | Q7 | TDI |
| 2011-2015 | Audi | Q7 | TDI Premium |
| 2011-2015 | Audi | Q7 | TDI Premium Plus |
| 2011-2015 | Audi | Q7 | TDI Prestige |
| 2007-2008 | Audi | RS4 | Base |
| 2008 | Audi | RS4 | Cabriolet |
| 2001,2007-2008 | Audi | S4 | Avant |
| 2000-2001,2007-2008,2010-2012 | Audi | S4 | Base |
| 2007-2009 | Audi | S4 | Cabriolet |
| 2008-2012 | Audi | S5 | Base |
| 2010-2012 | Audi | S5 | Cabriolet |
| 2007-2011 | Audi | S6 | Base |
| 2013-2016 | Audi | S7 | Base |
| 2017-2018 | Audi | S7 | Premium Plus |
| 2017-2018 | Audi | S7 | Prestige |
| 2001-2002 | Audi | S8 | Base |
| 2014-2018 | Audi | SQ5 | Premium Plus |
| 2014-2018 | Audi | SQ5 | Prestige |
| 2000-2006,2008-2009 | Audi | TT | Base |
| 2008-2013 | BMW | 128i | Base |
| 2008-2013 | BMW | 135i | Base |
| 2013 | BMW | 135is | Base |
| 2014-2016 | BMW | 228i | Base |
| 2015-2016 | BMW | 228i xDrive | Base |
| 2017-2018 | BMW | 230i | Base |
| 2017-2018 | BMW | 230i xDrive | Base |
| 2013-2018 | BMW | 320i | Base |
| 2013-2018 | BMW | 320i xDrive | Base |
| 2000 | BMW | 323Ci | Base |
| 2000 | BMW | 323i | Base |
| 2002-2006 | BMW | 325i | Base |
| 2000 | BMW | 328Ci | Base |
| 2014-2018 | BMW | 328d | Base |
| 2014-2018 | BMW | 328d xDrive | Base |
| 2000,2007-2016 | BMW | 328i | Base |
| 2014-2016 | BMW | 328i GT xDrive | Base |
| 2007-2008 | BMW | 328xi | Base |
| 2016,2018 | BMW | 330e | Base |
| 2017 | BMW | 330e | iPerformance |
| 2002-2006,2017-2018 | BMW | 330i | Base |
| 2017-2018 | BMW | 330i GT xDrive | Base |
| 2009-2011 | BMW | 335d | Base |
| 2007-2015 | BMW | 335i | Base |
| 2014-2016 | BMW | 335i GT xDrive | Base |
| 2009-2015 | BMW | 335i xDrive | Base |
| 2011-2013 | BMW | 335is | Base |
| 2007-2008 | BMW | 335xi | Base |
| 2016-2018 | BMW | 340i | Base |
| 2017-2018 | BMW | 340i GT xDrive | Base |
| 2016-2018 | BMW | 340i xDrive | Base |
| 2014-2016 | BMW | 428i | Base |
| 2015-2016 | BMW | 428i Gran Coupe | Base |
| 2014-2016 | BMW | 428i xDrive | Base |
| 2015-2016 | BMW | 428i xDrive Gran Coupe | Base |
| 2017-2020 | BMW | 430i | Base |
| 2017-2020 | BMW | 430i Gran Coupe | Base |
| 2017-2020 | BMW | 430i xDrive | Base |
| 2017-2020 | BMW | 430i xDrive Gran Coupe | Base |
| 2014-2016 | BMW | 435i | Base |
| 2015-2016 | BMW | 435i Gran Coupe | Base |
| 2014-2016 | BMW | 435i xDrive | Base |
| 2015-2016 | BMW | 435i xDrive Gran Coupe | Base |
| 2017-2020 | BMW | 440i | Base |
| 2017-2020 | BMW | 440i Gran Coupe | Base |
| 2017-2020 | BMW | 440i xDrive | Base |
| 2017-2020 | BMW | 440i xDrive Gran Coupe | Base |
| 2004-2005 | BMW | 525i | Base |
| 2008-2016 | BMW | 528i | Base |
| 2009-2010,2012-2016 | BMW | 528i xDrive | Base |
| 2008 | BMW | 528xi | Base |
| 2004-2005 | BMW | 530i | Base |
| 2014-2016 | BMW | 535d | Base |
| 2014-2016 | BMW | 535d xDrive | Base |
| 2008-2016 | BMW | 535i | Base |
| 2010-2017 | BMW | 535i GT | Base |
| 2011-2017 | BMW | 535i GT xDrive | Base |
| 2009-2016 | BMW | 535i xDrive | Base |
| 2008 | BMW | 535xi | Base |
| 2004-2005 | BMW | 545i | Base |
| 2008-2016 | BMW | 550i | Base |
| 2010-2015 | BMW | 550i GT | Base |
| 2010-2017 | BMW | 550i GT xDrive | Base |
| 2011-2016 | BMW | 550i xDrive | Base |
| 2012-2018 | BMW | 640i | Base |
| 2013-2018 | BMW | 640i Gran Coupe | Base |
| 2014-2018 | BMW | 640i xDrive | Base |
| 2014-2018 | BMW | 640i xDrive Gran Coupe | Base |
| 2018 | BMW | 640i xDrive Gran Turismo | Base |
| 2004-2005 | BMW | 645Ci | Base |
| 2006-2010,2012-2018 | BMW | 650i | Base |
| 2013-2018 | BMW | 650i Gran Coupe | Base |
| 2012-2018 | BMW | 650i xDrive | Base |
| 2013-2018 | BMW | 650i xDrive Gran Coupe | Base |
| 2017 | BMW | 740e xDrive | iPerformance |
| 2011-2017 | BMW | 740i | Base |
| 2017 | BMW | 740i xDrive | Base |
| 2015 | BMW | 740Ld xDrive | Base |
| 2013-2015 | BMW | 740Li xDrive | Base |
| 2002-2005 | BMW | 745i | Base |
| 2002-2005 | BMW | 745Li | Base |
| 2011-2012 | BMW | 750i | ActiveHybrid |
| 2006-2017 | BMW | 750i | Base |
| 2010-2017 | BMW | 750i xDrive | Base |
| 2011-2012 | BMW | 750Li | ActiveHybrid |
| 2006-2015 | BMW | 750Li | Base |
| 2010-2015 | BMW | 750Li xDrive | Base |
| 2004-2006 | BMW | 760i | Base |
| 2003-2008,2010-2015 | BMW | 760Li | Base |
| 2015-2018 | BMW | Alpina B6 xDrive Gran Coupe | Base |
| 2007-2008,2011-2015 | BMW | Alpina B7 | Base |
| 2011-2015 | BMW | Alpina B7 xDrive | Base |
| 2014-2021 | BMW | i3 | Base |
| 2014-2021 | BMW | i3 | Range Extender |
| 2001-2006,2009-2013,2015-2018 | BMW | M3 | Base |
| 2015-2018 | BMW | M4 | Base |
| 2016 | BMW | M4 | GTS |
| 2006-2010,2013-2016 | BMW | M5 | Base |
| 2006-2010,2012-2018 | BMW | M6 | Base |
| 2013-2015 | BMW | X1 | sDrive28i |
| 2012-2015 | BMW | X1 | xDrive28i |
| 2013-2015 | BMW | X1 | xDrive35i |
| 2004-2005 | BMW | X3 | 2.5i |
| 2004-2006 | BMW | X3 | 3.0i |
| 2007-2008 | BMW | X3 | 3.0si |
| 2009-2010 | BMW | X3 | xDrive30i |
| 2001-2006 | BMW | X5 | 3.0i |
| 2007-2008 | BMW | X5 | 3.0si |
| 2000-2006 | BMW | X5 | 4.4i |
| 2002-2003 | BMW | X5 | 4.6is |
| 2007-2008 | BMW | X5 | 4.8i |
| 2004-2006 | BMW | X5 | 4.8is |
| 2010-2013 | BMW | X5 | M |
| 2009-2010 | BMW | X5 | xDrive30i |
| 2009-2013 | BMW | X5 | xDrive35d |
| 2011-2013 | BMW | X5 | xDrive35i |
| 2009-2010 | BMW | X5 | xDrive48i |
| 2011-2013 | BMW | X5 | xDrive50i |
| 2010-2011 | BMW | X6 | ActiveHybrid |
| 2010-2014 | BMW | X6 | M |
| 2008-2014 | BMW | X6 | xDrive35i |
| 2008-2014 | BMW | X6 | xDrive50i |
| 2000-2002 | BMW | Z3 | Coupe |
| 2000-2002 | BMW | Z3 | M Coupe |
| 2000-2002 | BMW | Z3 | M Roadster |
| 2000-2002 | BMW | Z3 | Roadster |
| 2003-2005 | BMW | Z4 | 2.5i |
| 2003-2005 | BMW | Z4 | 3.0i |
| 2006-2008 | BMW | Z4 | Coupe 3.0si |
| 2006-2008 | BMW | Z4 | M Coupe |
| 2006-2008 | BMW | Z4 | M Roadster |
$19.96
These Diode Dynamics 194 HP5 LED bulbs in natural white are a high-power, direct replacement for the factory 194 bulb on the 2010-2014 SVT Raptor and the 2017-2020 F-150 Raptor.
About triple the output. At 92 lumens of measured output, the HP5 gives roughly three times the light of an original 5W 194 or 168 bulb. If that is more than you need, the HP3 is the lower-output option.
Neutral 4000K color. Natural white sits between warm and cool, so it looks clean without the blue tint of 6000K.
Heat and reliability. Copper inserts carry heat away from the LED, and constant-current circuitry with transient suppression keeps the bulb from flickering or failing early.
Where it fits on your Raptor. Diode lists this 194 bulb for the 2010-2014 SVT Raptor license plate and front map lights, and for the 2017-2020 Raptor license plate lights.
Features
- 194 size, natural white 4000K
- 92 lumens measured output
- Copper inserts for heat dissipation
- Dual-lead contacts, plug and play
- Constant-current circuitry with transient suppression
- Backed by Diode Dynamics' three-year replacement warranty
Fitment: 2010-2014 SVT Raptor (license plate and map lights) and 2017-2020 F-150 Raptor (license plate lights). Fitment confirmed against Diode Dynamics' published application list.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2017-2020 | Ford | F-150 | Raptor |
$19.96
These Diode Dynamics 194 HP5 LED bulbs in cool white are a high-power, direct replacement for the factory 194 bulb on the 2010-2014 SVT Raptor and the 2017-2020 F-150 Raptor.
About triple the output. At 92 lumens of measured output, the HP5 gives roughly three times the light of an original 5W 194 or 168 bulb. If that is more than you need, the HP3 is the lower-output option.
Crisp 6000K white. Cool white gives a modern, bright look that matches LED headlights and DRLs.
Heat and reliability. Copper inserts carry heat away from the LED, and constant-current circuitry with transient suppression keeps the bulb from flickering or failing early.
Where it fits on your Raptor. On the 2010-2014 SVT Raptor, Diode lists it for the sidemarker, license plate, front map and backup lights. On the 2017-2020 Raptor it is listed for the license plate lights.
Features
- 194 size, cool white 6000K
- 92 lumens measured output
- Copper inserts for heat dissipation
- Dual-lead contacts, plug and play
- Constant-current circuitry with transient suppression
- Backed by Diode Dynamics' three-year replacement warranty
Fitment: 2010-2014 SVT Raptor (sidemarker, license plate, map and backup lights) and 2017-2020 F-150 Raptor (license plate lights). Fitment confirmed against Diode Dynamics' published application list.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2017-2020 | Ford | F-150 | Raptor |
$7.96
These Diode Dynamics 194 SMD2 LED bulbs in cool white are a low-profile, direct replacement for the factory 194 bulb on the 2010-2014 SVT Raptor and the 2017-2020 F-150 Raptor.
A modern look. The two 5050-size SMDs replace the yellowish glow of the factory incandescent bulb with a clean cool white.
Factory-level output. At 24 lumens of measured output, the SMD2 gives similar light to an original 5W 194 or 168 bulb, so it suits low-level lamps like license plate and map lights.
Reliable build. An embedded load resistor and implanted diode add reliability, and constant-current circuitry with transient suppression prevents flicker.
Where it fits on your Raptor. Diode lists 194 bulbs for the 2010-2014 SVT Raptor sidemarker, license plate and front map lights, and for the 2017-2020 Raptor license plate lights.
Features
- 194 size, cool white 6000K
- 24 lumens measured output
- Embedded load resistor and diode
- Durable plastic connectors, plug and play
- Constant-current circuitry with transient suppression
- Backed by Diode Dynamics' three-year replacement warranty
Fitment: 2010-2014 SVT Raptor (sidemarker, license plate and map lights) and 2017-2020 F-150 Raptor (license plate lights). Fitment confirmed against Diode Dynamics' published application list.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2017-2020 | Ford | F-150 | Raptor |
$269.08
If you install an aftermarket front bumper, the adaptive cruise control sensor module has to move. This Addictive Desert Designs bracket relocates the ACC sensor behind the grille so you keep full cruise functionality, and it covers the 2017-2020 Ford F-150 Raptor along with other Ford trucks listed below.
Sensor relocated behind the grille. The bracket holds the ACC sensor module in a hidden position so it blends in discreetly once the new bumper is fitted.
Lightweight aluminum, black finish. It is built from lightweight aluminum and powder coated in black.
Features
- Relocates the ACC sensor module behind the grille
- Retains full adaptive cruise control functionality with aftermarket bumpers
- Lightweight aluminum construction
- Black powder coat
Fitment: 2017-2020 Ford F-150 Raptor, 2015-2020 Ford F-150, 2017-2022 Ford Super Duty and 2019-2022 Ford Ranger. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
2015-2017 F-150 / 2017-2020 Raptor Install Instructions2018-2020 F-150 Install Instructions
2017-Up Super Duty Install Instructions
2019 Ranger Install Instructions
Installation Instructions 1 (supplier copy)
Installation Instructions 2 (supplier copy)
Installation Instructions 3 (supplier copy)
Installation Instructions 4 (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
| 2015-2020 | Ford | F-150 | All trims |
| 2017-2022 | Ford | Super Duty | All trims |
| 2019-2022 | Ford | Ranger | All trims |
$539.99
Choose Simple: Extang's redesigned soft tri-fold cover has a host of new features yet remains the easiest to install and simplest to use. The newly redesigned Trifecta 2.0 Signature Series has a premium matte black finish and has been built to last for years. Your choice in soft tri-fold covers is still simple!
Warranty- Extang Engineered With Precision 45 Degree Steel Corner Brackets
- JawGrip Clamps Secure The Cover At Cab Without Damaging The Bed
- Rag Top Matte Black Premium Canvas Top Material Stands Out
- EZ Lock Clamps Allow Quick And Easy Access At The Tailgate
- EZ-Lock Clamps Allow Quick And Easy Access At The Tailgate
- Easy To Install With Extang Exclusive Clamping System
- Sexier Stronger Smarter Choose Extang Trifecta 2.0
- Maximum Strength Warranty Lifetime Tarp And Frame
- Sexier Stronger Smarter Choose Extang Trifecta 2
- High End Appearance With A Smooth Clean Profile
- High-End Appearance With A Smooth Clean Profile
- Lightweight Aircraft Grade Aluminum Frame
- Pro Grade OEM Quality Perimeter Seals
- Pro-grade OEM Quality Perimeter Seals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2026 | Ford | Ranger | Lariat |
| 2026 | Ford | Ranger | Raptor |
| 2026 | Ford | Ranger | XL |
| 2026 | Ford | Ranger | XLT |
The ICON Alloys Anza takes its name from Southern California's Anza-Borrego desert and pairs a concave profile with a deep stepped lip. This listing is the Satin Black finish in 17 x 8.5 inch, 6x5.5, 25mm offset, 5.75 inch backspacing and 95.1mm center bore. Fitted here as a Ford Raptor wheel by bolt pattern.
Built around ICON's wheel approach. ICON engineers each wheel to maximize caliper clearance and to optimize wheel position for unhindered suspension travel and steering function. Backspacing and offset are chosen to reduce scrub radius, which ICON says improves handling and ride quality.
Design and finish. ICON offers the Anza in a 17 inch diameter and 8.5 inch width, with several offsets, so you can dial it in for your application. This one is Satin Black.
Features
- Concave profile with a deep stepped lip
- Engineered to maximize caliper clearance and optimize wheel position for suspension travel and steering function
- Backspacing and offset set to reduce scrub radius
- 17 x 8.5 inch, 6x5.5 bolt pattern, 25mm offset, 5.75 inch backspacing, 95.1mm center bore
Fitment: ICON publishes this wheel as 17 x 8.5 inch, 6x5.5 bolt pattern, 25mm offset, 5.75 inch backspacing and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor, which uses a 6x5.5 (6x139.7) bolt pattern and a 93.1 mm hub; this wheel's 95.1mm center bore (from the supplier's listing) is larger than the hub, so a hub-centric ring fills the gap. Fitment decided by bolt pattern and center bore against Ford's Raptor hub specs. The Ranger Raptor takes M12x1.5 lug nuts; ICON's page does not list lug nuts with this wheel, so check what ships with it before you order.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Alloys Hulse is a motorsport-inspired wheel with an aggressive concave profile, twelve deep spokes, a thick lip and oversized ring bolts. This listing is the Double Black finish in 17 x 8.5 inch, 6x5.5, 25mm offset, 5.75 inch backspacing. Fitted here as a Ford Raptor wheel by bolt pattern.
Built around ICON's wheel approach. ICON engineers each wheel to maximize caliper clearance and to optimize wheel position for unhindered suspension travel and steering function. Backspacing and offset are chosen to reduce scrub radius, which ICON says improves handling and ride quality.
Design and finish. ICON offers the Hulse in Double Black and Silver Machined finishes, with fitments for both 6-lug and 5-lug applications. This one is Double Black.
Features
- Aggressive concave profile with twelve deep spokes
- Thick lip with oversized ring bolts
- Engineered to maximize caliper clearance and optimize wheel position for suspension travel and steering function
- Backspacing and offset set to reduce scrub radius
- 17 x 8.5 inch, 6x5.5 bolt pattern, 25mm offset, 5.75 inch backspacing
Fitment: ICON publishes this wheel as 17 x 8.5 inch, 6x5.5 bolt pattern, 25mm offset, 5.75 inch backspacing and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor, which uses a 6x5.5 (6x139.7) bolt pattern and a 93.1 mm hub. ICON and the supplier do not publish a center bore for this part, so confirm it is 93.1 mm or larger before ordering. Fitment decided by bolt pattern against Ford's Raptor hub specs; the center bore is not confirmed. The Ranger Raptor takes M12x1.5 lug nuts; ICON's page does not list lug nuts with this wheel, so check what ships with it before you order.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Alloys Hulse is a motorsport-inspired wheel with an aggressive concave profile, twelve deep spokes, a thick lip and oversized ring bolts. This listing is the Double Black finish in 17 x 8.5 inch, 6x5.5, 0mm offset, 4.75 inch backspacing. Fitted here as a Ford Raptor wheel by bolt pattern.
Built around ICON's wheel approach. ICON engineers each wheel to maximize caliper clearance and to optimize wheel position for unhindered suspension travel and steering function. Backspacing and offset are chosen to reduce scrub radius, which ICON says improves handling and ride quality.
Design and finish. ICON offers the Hulse in Double Black and Silver Machined finishes, with fitments for both 6-lug and 5-lug applications. This one is Double Black.
Features
- Aggressive concave profile with twelve deep spokes
- Thick lip with oversized ring bolts
- Engineered to maximize caliper clearance and optimize wheel position for suspension travel and steering function
- Backspacing and offset set to reduce scrub radius
- 17 x 8.5 inch, 6x5.5 bolt pattern, 0mm offset, 4.75 inch backspacing
Fitment: ICON publishes this wheel as 17 x 8.5 inch, 6x5.5 bolt pattern, 0mm offset, 4.75 inch backspacing and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor, which uses a 6x5.5 (6x139.7) bolt pattern and a 93.1 mm hub. ICON and the supplier do not publish a center bore for this part, so confirm it is 93.1 mm or larger before ordering. Fitment decided by bolt pattern against Ford's Raptor hub specs; the center bore is not confirmed. The Ranger Raptor takes M12x1.5 lug nuts; ICON's page does not list lug nuts with this wheel, so check what ships with it before you order.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Alloys Recon SLX is a 16-spoke concave wheel with a smooth lip and an embossed ICON Alloys center cap. This listing is the Gloss Black finish in 18 x 9 inch, 6x5.5, 40mm offset, 6.6 inch backspacing. Fitted here as a Ford Raptor wheel by bolt pattern.
Built around ICON's wheel approach. ICON engineers each wheel to maximize caliper clearance and to optimize wheel position for unhindered suspension travel and steering function. Backspacing and offset are chosen to reduce scrub radius, which ICON says improves handling and ride quality.
Design and finish. ICON builds the Recon SLX to look right and to work right: the design pairs sharp lines with an ICON-optimized stance. This one is Gloss Black.
Features
- Concave 16-spoke design with a smooth lip
- Embossed ICON Alloys center cap
- Engineered to maximize caliper clearance and optimize wheel position for suspension travel and steering function
- Backspacing and offset set to reduce scrub radius
- 18 x 9 inch, 6x5.5 bolt pattern, 40mm offset, 6.6 inch backspacing
Fitment: ICON publishes this wheel as 18 x 9 inch, 6x5.5 bolt pattern, 40mm offset, 6.6 inch backspacing and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor, which uses a 6x5.5 (6x139.7) bolt pattern and a 93.1 mm hub. ICON and the supplier do not publish a center bore for this part, so confirm it is 93.1 mm or larger before ordering. Fitment decided by bolt pattern against Ford's Raptor hub specs; the center bore is not confirmed. The Ranger Raptor takes M12x1.5 lug nuts; ICON's page does not list lug nuts with this wheel, so check what ships with it before you order.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Alloys Recon SLX is a 16-spoke concave wheel with a smooth lip and an embossed ICON Alloys center cap. This listing is the Charcoal finish in 18 x 9 inch, 6x5.5, 40mm offset, 6.6 inch backspacing and 95.1mm center bore. Fitted here as a Ford Raptor wheel by bolt pattern.
Built around ICON's wheel approach. ICON engineers each wheel to maximize caliper clearance and to optimize wheel position for unhindered suspension travel and steering function. Backspacing and offset are chosen to reduce scrub radius, which ICON says improves handling and ride quality.
Design and finish. ICON builds the Recon SLX to look right and to work right: the design pairs sharp lines with an ICON-optimized stance. This one is Charcoal.
Features
- Concave 16-spoke design with a smooth lip
- Embossed ICON Alloys center cap
- Engineered to maximize caliper clearance and optimize wheel position for suspension travel and steering function
- Backspacing and offset set to reduce scrub radius
- 18 x 9 inch, 6x5.5 bolt pattern, 40mm offset, 6.6 inch backspacing, 95.1mm center bore
Fitment: ICON publishes this wheel as 18 x 9 inch, 6x5.5 bolt pattern, 40mm offset, 6.6 inch backspacing and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor, which uses a 6x5.5 (6x139.7) bolt pattern and a 93.1 mm hub; this wheel's 95.1mm center bore (from the supplier's listing) is larger than the hub, so a hub-centric ring fills the gap. Fitment decided by bolt pattern and center bore against Ford's Raptor hub specs. The Ranger Raptor takes M12x1.5 lug nuts; ICON's page does not list lug nuts with this wheel, so check what ships with it before you order.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Alloys Recon SLX is a 16-spoke concave wheel with a smooth lip and an embossed ICON Alloys center cap. This listing is the Satin Black finish in 17 x 8.5 inch, 6x5.5, 25mm offset, 5.75 inch backspacing and 95.1mm center bore. Fitted here as a Ford Raptor wheel by bolt pattern.
Built around ICON's wheel approach. ICON engineers each wheel to maximize caliper clearance and to optimize wheel position for unhindered suspension travel and steering function. Backspacing and offset are chosen to reduce scrub radius, which ICON says improves handling and ride quality.
Design and finish. ICON builds the Recon SLX to look right and to work right: the design pairs sharp lines with an ICON-optimized stance. This one is Satin Black.
Features
- Concave 16-spoke design with a smooth lip
- Embossed ICON Alloys center cap
- Engineered to maximize caliper clearance and optimize wheel position for suspension travel and steering function
- Backspacing and offset set to reduce scrub radius
- 17 x 8.5 inch, 6x5.5 bolt pattern, 25mm offset, 5.75 inch backspacing, 95.1mm center bore
Fitment: ICON publishes this wheel as 17 x 8.5 inch, 6x5.5 bolt pattern, 25mm offset, 5.75 inch backspacing and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor, which uses a 6x5.5 (6x139.7) bolt pattern and a 93.1 mm hub; this wheel's 95.1mm center bore (from the supplier's listing) is larger than the hub, so a hub-centric ring fills the gap. Fitment decided by bolt pattern and center bore against Ford's Raptor hub specs. The Ranger Raptor takes M12x1.5 lug nuts; ICON's page does not list lug nuts with this wheel, so check what ships with it before you order.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Alloys Recon SLX is a 16-spoke concave wheel with a smooth lip and an embossed ICON Alloys center cap. This listing is the Charcoal finish in 17 x 8.5 inch, 6x5.5, 0mm offset, 4.75 inch backspacing and 106.1mm center bore. Fitted here as a Ford Raptor wheel by bolt pattern.
Built around ICON's wheel approach. ICON engineers each wheel to maximize caliper clearance and to optimize wheel position for unhindered suspension travel and steering function. Backspacing and offset are chosen to reduce scrub radius, which ICON says improves handling and ride quality.
Design and finish. ICON builds the Recon SLX to look right and to work right: the design pairs sharp lines with an ICON-optimized stance. This one is Charcoal.
Features
- Concave 16-spoke design with a smooth lip
- Embossed ICON Alloys center cap
- Engineered to maximize caliper clearance and optimize wheel position for suspension travel and steering function
- Backspacing and offset set to reduce scrub radius
- 17 x 8.5 inch, 6x5.5 bolt pattern, 0mm offset, 4.75 inch backspacing, 106.1mm center bore
Fitment: ICON publishes this wheel as 17 x 8.5 inch, 6x5.5 bolt pattern, 0mm offset, 4.75 inch backspacing and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor, which uses a 6x5.5 (6x139.7) bolt pattern and a 93.1 mm hub; this wheel's 106.1mm center bore (from the supplier's listing) is larger than the hub, so a hub-centric ring fills the gap. Fitment decided by bolt pattern and center bore against Ford's Raptor hub specs. The Ranger Raptor takes M12x1.5 lug nuts; ICON's page does not list lug nuts with this wheel, so check what ships with it before you order.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Alloys Recon PRO is a 17x8.5 off-road wheel with ICON's patented InnerLock bead retention system and a removable HALO Wheel Armor ring, shown here in Charcoal with a black ring. It uses a 6x5.5 (6x139.7) bolt pattern with a 25mm offset, 5.75in backspacing and a 95.1mm center bore.
Low pressure without the beadlock upkeep. Running lower tire pressures improves ride quality and widens the contact patch, but raises the risk of de-beading under heavy side loads. ICON says traditional bead lock wheels solve that with frequent maintenance, specialty tools and parts, extra rotational mass, and are not legal for on-road use. InnerLock keeps the tire bead secured with a bead retention system and is DOT compliant.
Tested for bead retention. ICON subjected the Recon PRO to real-world abuse, then had an independent contractor run the FMVSS No. 139 Tire Bead Unseat Resistance Test, modified to 10 psi. ICON reports the machine reached its mechanical limit (over 7,600 lb of load) without de-beading the tire.
HALO Wheel Armor. The included high-grade aluminum HALO Wheel Armor is removable and replaceable, and protects the wheel from trail rash. It can be replaced in 90 degree segments, so a damaged section can be swapped without replacing the whole ring, and it can be customized to match your style.
Fit and handling. ICON engineered the wheel to maximize caliper clearance and position it for unhindered suspension travel and steering, with backspacing and offset chosen to reduce scrub radius. It is strength tested to a 3,200 lb load rating.
Features
- Size: 17 x 8.5
- Bolt pattern: 6 x 5.5 (6x139.7)
- Offset: 25mm; backspacing 5.75in
- Center bore: 95.1mm (per ICON's wheel table)
- Finish: Charcoal with black ring
- Patented InnerLock bead retention, DOT compliant
- Included replaceable HALO Wheel Armor
- 3,200 lb load rating
Fitment: ICON publishes this wheel as 17 x 8.5, 6x5.5 with a 25mm offset and 5.75in backspacing and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor, the only Raptor that uses a 6x139.7 bolt pattern and a 93.1mm center bore. This wheel's 95.1mm bore is larger than the hub, so a hub-centric ring is needed to fill the gap. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs. The Ranger Raptor uses M12x1.5 lug nuts, and wheels are sold without lug nuts unless listed. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Alloys Recon PRO is a 17x8.5 off-road wheel with ICON's patented InnerLock bead retention system and a removable HALO Wheel Armor ring, shown here in Satin Black. It uses a 6x5.5 (6x139.7) bolt pattern with a 0mm offset, 4.75in backspacing and a 106.1mm center bore.
Low pressure without the beadlock upkeep. Running lower tire pressures improves ride quality and widens the contact patch, but raises the risk of de-beading under heavy side loads. ICON says traditional bead lock wheels solve that with frequent maintenance, specialty tools and parts, extra rotational mass, and are not legal for on-road use. InnerLock keeps the tire bead secured with a bead retention system and is DOT compliant.
Tested for bead retention. ICON subjected the Recon PRO to real-world abuse, then had an independent contractor run the FMVSS No. 139 Tire Bead Unseat Resistance Test, modified to 10 psi. ICON reports the machine reached its mechanical limit (over 7,600 lb of load) without de-beading the tire.
HALO Wheel Armor. The included high-grade aluminum HALO Wheel Armor is removable and replaceable, and protects the wheel from trail rash. It can be replaced in 90 degree segments, so a damaged section can be swapped without replacing the whole ring, and it can be customized to match your style.
Fit and handling. ICON engineered the wheel to maximize caliper clearance and position it for unhindered suspension travel and steering, with backspacing and offset chosen to reduce scrub radius. It is strength tested to a 3,200 lb load rating.
Features
- Size: 17 x 8.5
- Bolt pattern: 6 x 5.5 (6x139.7)
- Offset: 0mm; backspacing 4.75in
- Center bore: 106.1mm
- Finish: Satin Black
- Patented InnerLock bead retention, DOT compliant
- Included replaceable HALO Wheel Armor
- 3,200 lb load rating
Fitment: ICON publishes this wheel as 17 x 8.5, 6x5.5 with a 0mm offset and 4.75in backspacing and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor, the only Raptor that uses a 6x139.7 bolt pattern and a 93.1mm center bore. This wheel's 106.1mm bore is larger than the hub, so a hub-centric ring is needed to fill the gap. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs. The Ranger Raptor uses M12x1.5 lug nuts, and wheels are sold without lug nuts unless listed. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Alloys Rebound PRO is a 17x8.5 off-road wheel with ICON's patented InnerLock bead retention system, shown here in Satin Black. It uses a 6x5.5 (6x139.7) bolt pattern with a 25mm offset, 5.75in backspacing and a 95.1mm center bore.
Low pressure without the beadlock upkeep. Running lower tire pressures improves ride quality and widens the contact patch, but raises the risk of de-beading under heavy side loads. ICON says traditional beadlock wheels solve that with frequent maintenance, specialty tools and parts, extra rotational mass, and are not legal for on-road use. InnerLock keeps the tire bead secured with a bead retention system and is DOT compliant.
Tested for bead retention. ICON subjected the Rebound PRO to real-world abuse, then had an independent contractor run the FMVSS No. 139 Tire Bead Unseat Resistance Test, modified to 10 psi. ICON reports the machine reached its mechanical limit (over 7,600 lb of load) without de-beading the tire.
Fit and handling. ICON engineered the wheel to maximize caliper clearance and position it for unhindered suspension travel and steering, with backspacing and offset chosen to reduce scrub radius. It is strength tested to a 3,200 lb load rating.
Features
- Size: 17 x 8.5
- Bolt pattern: 6 x 5.5 (6x139.7)
- Offset: 25mm; backspacing 5.75in
- Center bore: 95.1mm
- Finish: Satin Black
- Patented InnerLock bead retention, DOT compliant
- 3,200 lb load rating
Fitment: ICON publishes this wheel as 17 x 8.5, 6x5.5 with a 25mm offset and 5.75in backspacing and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor, the only Raptor that uses a 6x139.7 bolt pattern and a 93.1mm center bore. This wheel's 95.1mm bore is larger than the hub, so a hub-centric ring is needed to fill the gap. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs. The Ranger Raptor uses M12x1.5 lug nuts, and wheels are sold without lug nuts unless listed. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Alloys Rebound PRO is a 17x8.5 off-road wheel with ICON's patented InnerLock bead retention system, shown here in Titanium. It uses a 6x5.5 (6x139.7) bolt pattern with a 0mm offset, 4.75in backspacing and a 106.1mm center bore.
Low pressure without the beadlock upkeep. Running lower tire pressures improves ride quality and widens the contact patch, but raises the risk of de-beading under heavy side loads. ICON says traditional beadlock wheels solve that with frequent maintenance, specialty tools and parts, extra rotational mass, and are not legal for on-road use. InnerLock keeps the tire bead secured with a bead retention system and is DOT compliant.
Tested for bead retention. ICON subjected the Rebound PRO to real-world abuse, then had an independent contractor run the FMVSS No. 139 Tire Bead Unseat Resistance Test, modified to 10 psi. ICON reports the machine reached its mechanical limit (over 7,600 lb of load) without de-beading the tire.
Fit and handling. ICON engineered the wheel to maximize caliper clearance and position it for unhindered suspension travel and steering, with backspacing and offset chosen to reduce scrub radius. It is strength tested to a 3,200 lb load rating.
Features
- Size: 17 x 8.5
- Bolt pattern: 6 x 5.5 (6x139.7)
- Offset: 0mm; backspacing 4.75in
- Center bore: 106.1mm
- Finish: Titanium
- Patented InnerLock bead retention, DOT compliant
- 3,200 lb load rating
Fitment: ICON publishes this wheel as 17 x 8.5, 6x5.5 with a 0mm offset and 4.75in backspacing and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor, the only Raptor that uses a 6x139.7 bolt pattern and a 93.1mm center bore. This wheel's 106.1mm bore is larger than the hub, so a hub-centric ring is needed to fill the gap. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs. The Ranger Raptor uses M12x1.5 lug nuts, and wheels are sold without lug nuts unless listed. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Alloys Rebound PRO is a 17x8.5 off-road wheel with ICON's patented InnerLock bead retention system, shown here in Satin Black. It uses a 6x5.5 (6x139.7) bolt pattern with a 0mm offset, 4.75in backspacing and a 106.1mm center bore.
Low pressure without the beadlock upkeep. Running lower tire pressures improves ride quality and widens the contact patch, but raises the risk of de-beading under heavy side loads. ICON says traditional beadlock wheels solve that with frequent maintenance, specialty tools and parts, extra rotational mass, and are not legal for on-road use. InnerLock keeps the tire bead secured with a bead retention system and is DOT compliant.
Tested for bead retention. ICON subjected the Rebound PRO to real-world abuse, then had an independent contractor run the FMVSS No. 139 Tire Bead Unseat Resistance Test, modified to 10 psi. ICON reports the machine reached its mechanical limit (over 7,600 lb of load) without de-beading the tire.
Fit and handling. ICON engineered the wheel to maximize caliper clearance and position it for unhindered suspension travel and steering, with backspacing and offset chosen to reduce scrub radius. It is strength tested to a 3,200 lb load rating.
Features
- Size: 17 x 8.5
- Bolt pattern: 6 x 5.5 (6x139.7)
- Offset: 0mm; backspacing 4.75in
- Center bore: 106.1mm
- Finish: Satin Black
- Patented InnerLock bead retention, DOT compliant
- 3,200 lb load rating
Fitment: ICON publishes this wheel as 17 x 8.5, 6x5.5 with a 0mm offset and 4.75in backspacing and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor, the only Raptor that uses a 6x139.7 bolt pattern and a 93.1mm center bore. This wheel's 106.1mm bore is larger than the hub, so a hub-centric ring is needed to fill the gap. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs. The Ranger Raptor uses M12x1.5 lug nuts, and wheels are sold without lug nuts unless listed. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Alloys Rebound PRO is a 17x8.5 off-road wheel with ICON's patented InnerLock bead retention system, shown here in Bronze. It uses a 6x5.5 (6x139.7) bolt pattern with a 0mm offset, 4.75in backspacing and a 106.1mm center bore.
Low pressure without the beadlock upkeep. Running lower tire pressures improves ride quality and widens the contact patch, but raises the risk of de-beading under heavy side loads. ICON says traditional beadlock wheels solve that with frequent maintenance, specialty tools and parts, extra rotational mass, and are not legal for on-road use. InnerLock keeps the tire bead secured with a bead retention system and is DOT compliant.
Tested for bead retention. ICON subjected the Rebound PRO to real-world abuse, then had an independent contractor run the FMVSS No. 139 Tire Bead Unseat Resistance Test, modified to 10 psi. ICON reports the machine reached its mechanical limit (over 7,600 lb of load) without de-beading the tire.
Fit and handling. ICON engineered the wheel to maximize caliper clearance and position it for unhindered suspension travel and steering, with backspacing and offset chosen to reduce scrub radius. It is strength tested to a 3,200 lb load rating.
Features
- Size: 17 x 8.5
- Bolt pattern: 6 x 5.5 (6x139.7)
- Offset: 0mm; backspacing 4.75in
- Center bore: 106.1mm
- Finish: Bronze
- Patented InnerLock bead retention, DOT compliant
- 3,200 lb load rating
Fitment: ICON publishes this wheel as 17 x 8.5, 6x5.5 with a 0mm offset and 4.75in backspacing and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor, the only Raptor that uses a 6x139.7 bolt pattern and a 93.1mm center bore. This wheel's 106.1mm bore is larger than the hub, so a hub-centric ring is needed to fill the gap. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs. The Ranger Raptor uses M12x1.5 lug nuts, and wheels are sold without lug nuts unless listed. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Alloys Compression is an 18x9 wheel with sharp lines and a concave spoke design, finished in Double Black. ICON sizes its wheels to suit trucks, Jeeps and SUVs, and this one is built on a 6x5.5 (6x139.7) bolt pattern with a 25mm offset, 6in backspacing and a 95.1mm center bore.
Built around fit and clearance. ICON says the Compression is engineered to maximize caliper clearance and position the wheel for unhindered suspension travel and steering.
Backspace and offset set for handling. ICON developed the backspacing and offset to reduce scrub radius, which it says improves overall handling and ride quality.
Features
- Size: 18 x 9
- Bolt pattern: 6 x 5.5 (6x139.7)
- Offset: 25mm
- Backspacing: 6in
- Center bore: 95.1mm
- Finish: Double Black
- Load rating: 2,750 lb per ICON's wheel table
- Aluminum alloy construction
Fitment: ICON publishes this wheel as 18 x 9, 6x5.5 with a 25mm offset and 6in backspacing and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor, the only Raptor that uses a 6x139.7 bolt pattern and a 93.1mm center bore. This wheel's 95.1mm bore is larger than the hub, so a hub-centric ring is needed to fill the gap. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs. The Ranger Raptor uses M12x1.5 lug nuts, and wheels are sold without lug nuts unless listed. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Compression 18x9 in double black is a 6x5.5 (6x139.7) wheel from ICON Alloys with a 0mm offset, 5in backspacing and a 106.1 mm center bore. It is listed here for the 2024-2026 Ford Ranger Raptor, the Raptor that uses a 6x139.7 bolt pattern.
Built for the larger size. ICON added the 18x9 size to its Compression line for trucks, Jeeps and SUVs, with application-specific fitment dimensions. Its backspacing is chosen for better wheel fitment, maximized caliper clearance, reduced scrub radius and unhindered suspension travel.
Strength for hard use. The wheel is made from a high-strength aluminum alloy. ICON gives the 18x9 Compression a 2,750-pound load rating and says it is built for hard-core off-road excursions and heavy towing and hauling duty.
Know before you order. Ford lists 17 inch factory wheels on the Ranger Raptor, so this 18 inch wheel needs tires sized for an 18 inch rim. The 106.1 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so hub-centric rings are needed to center the wheel. The Ranger Raptor uses M12x1.5 lug nuts, and ICON's page does not list lug nuts with this wheel, so order them separately.
Features
- 18x9 size with a 6x5.5 (6x139.7) bolt pattern
- 0mm offset and 5in backspacing
- 106.1 mm center bore
- Double Black finish
- High-strength aluminum alloy, 2,750 lb load rating (ICON, 18x9)
- Backspacing set to maximize caliper clearance and reduce scrub radius
Fitment: ICON publishes this wheel as 18x9, 6x5.5 with a 0mm offset and 5in backspacing and does not name vehicles. It is listed for the Ranger Raptor, the Raptor that uses a 6x139.7 (6x5.5) bolt pattern with a 93.1 mm hub; the 106.1 mm bore comes from the supplier listing and is larger than the hub. Fitment was decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs. It is not listed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use 6x135.
Offset note: This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Compression 17x8.5 in titanium is a 6x5.5 (6x139.7) wheel from ICON Alloys with a 25mm offset, 5.75in backspacing and a 95.1 mm center bore. It is listed here for the 2024-2026 Ford Ranger Raptor, the Raptor that uses a 6x139.7 bolt pattern.
Styling with a purpose. ICON describes the Compression as combining sharp lines, a concave spoke design and "ICON-optimized" dimensions to improve both the form and the function of a Jeep, truck or SUV.
Dimensions tuned for the suspension. ICON engineered the Compression to maximize caliper clearance and optimize wheel position for unhindered suspension travel and steering function. Backspacing and offset were set to reduce scrub radius, which ICON says improves handling and ride quality.
Know before you order. The 95.1 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so hub-centric rings are needed to center the wheel. The Ranger Raptor uses M12x1.5 lug nuts, and ICON's page does not list lug nuts with this wheel, so order them separately.
Features
- 17x8.5 size with a 6x5.5 (6x139.7) bolt pattern
- 25mm offset and 5.75in backspacing
- 95.1 mm center bore
- Titanium finish
- Concave spoke design with ICON-optimized dimensions
- Backspacing set to maximize caliper clearance and reduce scrub radius
Fitment: ICON publishes this wheel as 17x8.5, 6x5.5 with a 25mm offset and 5.75in backspacing and does not name vehicles. It is listed for the Ranger Raptor, the Raptor that uses a 6x139.7 (6x5.5) bolt pattern with a 93.1 mm hub; the 95.1 mm bore comes from the supplier listing and is larger than the hub. Fitment was decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs. It is not listed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use 6x135.
Offset note: This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Compression 17x8.5 in bronze is a 6x5.5 (6x139.7) wheel from ICON Alloys with a 25mm offset, 5.75in backspacing and a 95.1 mm center bore. It is listed here for the 2024-2026 Ford Ranger Raptor, the Raptor that uses a 6x139.7 bolt pattern.
Styling with a purpose. ICON describes the Compression as combining sharp lines, a concave spoke design and "ICON-optimized" dimensions to improve both the form and the function of a Jeep, truck or SUV.
Dimensions tuned for the suspension. ICON engineered the Compression to maximize caliper clearance and optimize wheel position for unhindered suspension travel and steering function. Backspacing and offset were set to reduce scrub radius, which ICON says improves handling and ride quality.
Know before you order. The 95.1 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so hub-centric rings are needed to center the wheel. The Ranger Raptor uses M12x1.5 lug nuts, and ICON's page does not list lug nuts with this wheel, so order them separately.
Features
- 17x8.5 size with a 6x5.5 (6x139.7) bolt pattern
- 25mm offset and 5.75in backspacing
- 95.1 mm center bore
- Bronze finish
- Concave spoke design with ICON-optimized dimensions
- Backspacing set to maximize caliper clearance and reduce scrub radius
Fitment: ICON publishes this wheel as 17x8.5, 6x5.5 with a 25mm offset and 5.75in backspacing and does not name vehicles. It is listed for the Ranger Raptor, the Raptor that uses a 6x139.7 (6x5.5) bolt pattern with a 93.1 mm hub; the 95.1 mm bore comes from the supplier listing and is larger than the hub. Fitment was decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs. It is not listed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use 6x135.
Offset note: This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Compression 17x8.5 in titanium is a 6x5.5 (6x139.7) wheel from ICON Alloys with a 0mm offset, 4.75in backspacing and a 106.1 mm center bore. It is listed here for the 2024-2026 Ford Ranger Raptor, the Raptor that uses a 6x139.7 bolt pattern.
Styling with a purpose. ICON describes the Compression as combining sharp lines, a concave spoke design and "ICON-optimized" dimensions to improve both the form and the function of a Jeep, truck or SUV.
Dimensions tuned for the suspension. ICON engineered the Compression to maximize caliper clearance and optimize wheel position for unhindered suspension travel and steering function. Backspacing and offset were set to reduce scrub radius, which ICON says improves handling and ride quality.
Know before you order. The 106.1 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so hub-centric rings are needed to center the wheel. The Ranger Raptor uses M12x1.5 lug nuts, and ICON's page does not list lug nuts with this wheel, so order them separately.
Features
- 17x8.5 size with a 6x5.5 (6x139.7) bolt pattern
- 0mm offset and 4.75in backspacing
- 106.1 mm center bore
- Titanium finish
- Concave spoke design with ICON-optimized dimensions
- Backspacing set to maximize caliper clearance and reduce scrub radius
Fitment: ICON publishes this wheel as 17x8.5, 6x5.5 with a 0mm offset and 4.75in backspacing and does not name vehicles. It is listed for the Ranger Raptor, the Raptor that uses a 6x139.7 (6x5.5) bolt pattern with a 93.1 mm hub; the 106.1 mm bore comes from the supplier listing and is larger than the hub. Fitment was decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs. It is not listed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use 6x135.
Offset note: This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Compression 17x8.5 in bronze is a 6x5.5 (6x139.7) wheel from ICON Alloys with a 0mm offset, 4.75in backspacing and a 106.1 mm center bore. It is listed here for the 2024-2026 Ford Ranger Raptor, the Raptor that uses a 6x139.7 bolt pattern.
Styling with a purpose. ICON describes the Compression as combining sharp lines, a concave spoke design and "ICON-optimized" dimensions to improve both the form and the function of a Jeep, truck or SUV.
Dimensions tuned for the suspension. ICON engineered the Compression to maximize caliper clearance and optimize wheel position for unhindered suspension travel and steering function. Backspacing and offset were set to reduce scrub radius, which ICON says improves handling and ride quality.
Know before you order. The 106.1 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so hub-centric rings are needed to center the wheel. The Ranger Raptor uses M12x1.5 lug nuts, and ICON's page does not list lug nuts with this wheel, so order them separately.
Features
- 17x8.5 size with a 6x5.5 (6x139.7) bolt pattern
- 0mm offset and 4.75in backspacing
- 106.1 mm center bore
- Bronze finish
- Concave spoke design with ICON-optimized dimensions
- Backspacing set to maximize caliper clearance and reduce scrub radius
Fitment: ICON publishes this wheel as 17x8.5, 6x5.5 with a 0mm offset and 4.75in backspacing and does not name vehicles. It is listed for the Ranger Raptor, the Raptor that uses a 6x139.7 (6x5.5) bolt pattern with a 93.1 mm hub; the 106.1 mm bore comes from the supplier listing and is larger than the hub. Fitment was decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs. It is not listed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use 6x135.
Offset note: This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Rebound SLX 17x8.5 in satin black is a 6x5.5 (6x139.7) wheel from ICON Alloys with a 25mm offset, 5.75in backspacing and a 95.1 mm center bore. It is listed here for the 2024-2026 Ford Ranger Raptor, the Raptor that uses a 6x139.7 bolt pattern.
Classic Rebound look, smooth lip. The Rebound SLX keeps the sharp lines, concave 8-spoke design and "ICON-optimized" styling of the classic Rebound but adds a smooth lip. ICON offers it in Satin Black and Charcoal.
Dimensions tuned for the suspension. ICON engineered the wheel to maximize caliper clearance and optimize wheel position for unhindered suspension travel and steering function. Backspacing and offset were set to reduce scrub radius, which ICON says improves handling and ride quality.
Strength tested. ICON strength tested the Rebound SLX to a 3,200-pound load rating and calls it one of the strongest wheel options on the market.
Know before you order. The 95.1 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so hub-centric rings are needed to center the wheel. The Ranger Raptor uses M12x1.5 lug nuts, and ICON's page does not list lug nuts with this wheel, so order them separately.
Features
- 17x8.5 size with a 6x5.5 (6x139.7) bolt pattern
- 25mm offset and 5.75in backspacing
- 95.1 mm center bore
- Satin Black finish
- Smooth lip, 8-spoke design, 3,200 lb load rating (ICON)
- Backspacing set to maximize caliper clearance and reduce scrub radius
Fitment: ICON publishes this wheel as 17x8.5, 6x5.5 with a 25mm offset and 5.75in backspacing and does not name vehicles. It is listed for the Ranger Raptor, the Raptor that uses a 6x139.7 (6x5.5) bolt pattern with a 93.1 mm hub; the 95.1 mm bore comes from the supplier listing and is larger than the hub. Fitment was decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs. It is not listed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use 6x135.
Offset note: This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Rebound SLX 17x8.5 in satin black is a 6x5.5 (6x139.7) wheel from ICON Alloys with a 0mm offset, 4.75in backspacing and a 106.1 mm center bore. It is listed here for the 2024-2026 Ford Ranger Raptor, the Raptor that uses a 6x139.7 bolt pattern.
Classic Rebound look, smooth lip. The Rebound SLX keeps the sharp lines, concave 8-spoke design and "ICON-optimized" styling of the classic Rebound but adds a smooth lip. ICON offers it in Satin Black and Charcoal.
Dimensions tuned for the suspension. ICON engineered the wheel to maximize caliper clearance and optimize wheel position for unhindered suspension travel and steering function. Backspacing and offset were set to reduce scrub radius, which ICON says improves handling and ride quality.
Strength tested. ICON strength tested the Rebound SLX to a 3,200-pound load rating and calls it one of the strongest wheel options on the market.
Know before you order. The 106.1 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so hub-centric rings are needed to center the wheel. The Ranger Raptor uses M12x1.5 lug nuts, and ICON's page does not list lug nuts with this wheel, so order them separately.
Features
- 17x8.5 size with a 6x5.5 (6x139.7) bolt pattern
- 0mm offset and 4.75in backspacing
- 106.1 mm center bore
- Satin Black finish
- Smooth lip, 8-spoke design, 3,200 lb load rating (ICON)
- Backspacing set to maximize caliper clearance and reduce scrub radius
Fitment: ICON publishes this wheel as 17x8.5, 6x5.5 with a 0mm offset and 4.75in backspacing and does not name vehicles. It is listed for the Ranger Raptor, the Raptor that uses a 6x139.7 (6x5.5) bolt pattern with a 93.1 mm hub; the 106.1 mm bore comes from the supplier listing and is larger than the hub. Fitment was decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs. It is not listed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use 6x135.
Offset note: This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Rebound 18x9 in bronze is a 6x5.5 (6x139.7) wheel from ICON Alloys with a 25mm offset, 6in backspacing and a 95.1 mm center bore. It is listed here for the 2024-2026 Ford Ranger Raptor, the Raptor that uses a 6x139.7 bolt pattern.
Built for the larger size. ICON added the 18x9 size to its Rebound line for midsize, full-size and heavy-duty pickups, with application-specific fitment dimensions. Its backspacing is chosen for better wheel fitment, maximized caliper clearance, reduced scrub radius and unhindered suspension travel.
Strength for trail and tow duty. The wheel is made from a high-strength aluminum alloy. ICON gives the six-lug 18x9 Rebound a 2,750-pound load rating and says it is built for off-road excursions and towing and hauling duty.
Know before you order. Ford lists 17 inch factory wheels on the Ranger Raptor, so this 18 inch wheel needs tires sized for an 18 inch rim. The 95.1 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so hub-centric rings are needed to center the wheel. The Ranger Raptor uses M12x1.5 lug nuts, and ICON's page does not list lug nuts with this wheel, so order them separately.
Features
- 18x9 size with a 6x5.5 (6x139.7) bolt pattern
- 25mm offset and 6in backspacing
- 95.1 mm center bore
- Bronze finish
- High-strength aluminum alloy, 2,750 lb load rating (ICON, 18x9)
- Backspacing set to maximize caliper clearance and reduce scrub radius
Fitment: ICON publishes this wheel as 18x9, 6x5.5 with a 25mm offset and 6in backspacing and does not name vehicles. It is listed for the Ranger Raptor, the Raptor that uses a 6x139.7 (6x5.5) bolt pattern with a 93.1 mm hub; the 95.1 mm bore comes from the supplier listing and is larger than the hub. Fitment was decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs. It is not listed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use 6x135.
Offset note: This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Rebound 18x9 in satin black is a 6x5.5 (6x139.7) wheel from ICON Alloys with a 0mm offset, 5in backspacing and a 106.1 mm center bore. It is listed here for the 2024-2026 Ford Ranger Raptor, the Raptor that uses a 6x139.7 bolt pattern.
Built for the larger size. ICON added the 18x9 size to its Rebound line for midsize, full-size and heavy-duty pickups, with application-specific fitment dimensions. Its backspacing is chosen for better wheel fitment, maximized caliper clearance, reduced scrub radius and unhindered suspension travel.
Strength for trail and tow duty. The wheel is made from a high-strength aluminum alloy. ICON gives the six-lug 18x9 Rebound a 2,750-pound load rating and says it is built for off-road excursions and towing and hauling duty.
Know before you order. Ford lists 17 inch factory wheels on the Ranger Raptor, so this 18 inch wheel needs tires sized for an 18 inch rim. The 106.1 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so hub-centric rings are needed to center the wheel. The Ranger Raptor uses M12x1.5 lug nuts, and ICON's page does not list lug nuts with this wheel, so order them separately.
Features
- 18x9 size with a 6x5.5 (6x139.7) bolt pattern
- 0mm offset and 5in backspacing
- 106.1 mm center bore
- Satin Black finish
- High-strength aluminum alloy, 2,750 lb load rating (ICON, 18x9)
- Backspacing set to maximize caliper clearance and reduce scrub radius
Fitment: ICON publishes this wheel as 18x9, 6x5.5 with a 0mm offset and 5in backspacing and does not name vehicles. It is listed for the Ranger Raptor, the Raptor that uses a 6x139.7 (6x5.5) bolt pattern with a 93.1 mm hub; the 106.1 mm bore comes from the supplier listing and is larger than the hub. Fitment was decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs. It is not listed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use 6x135.
Offset note: This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Rebound 18x9 wheel in double black pairs a concave eight-spoke design with ICON-optimized dimensions. This listing is the 18 x 9, 6x5.5 bolt pattern, 0mm offset version with 5in of backspacing and a 106.1mm center bore. It is listed here for the Ranger Raptor.
Built around ICON-optimized dimensions. ICON says the Rebound is engineered to maximize brake caliper clearance and to position the wheel for unhindered suspension travel and steering. Its backspacing and offset are set to reduce scrub radius, which ICON ties to better handling and ride quality, and it is meant to complement an ICON Vehicle Dynamics suspension system.
Aluminum alloy construction. ICON describes the Rebound as aluminum alloy construction with strength properties well suited to off-road use, and says the reduced unsprung weight and rotating mass improve on- and off-road performance.
Load rating. ICON states that its 18x9 Rebound in the six-lug pattern carries a 2,750-pound load rating and is made from high-strength aluminum alloy for off-road trips and towing or hauling duty.
Specifications (as published by ICON).
- Size: 18x9
- Bolt pattern: 6x5.5
- Offset: 0mm
- Backspacing: 5in
- Center bore: 106.1mm
- Finish: Double Black
- ICON part number: 1818908350DB
Features
- Concave eight-spoke Rebound design in double black
- Aluminum alloy construction suited to off-road use
- Reduced unsprung weight and rotating mass for better on- and off-road performance
- Application-specific dimensions to optimize vehicle dynamics and tire clearance
Fitment: ICON publishes this wheel as 18 x 9, 6x5.5 with a 0mm offset and 5in backspacing and does not name vehicles. The 6x5.5 pattern (6x139.7) is used by the Ford Ranger Raptor, whose hub bore is 93.1 mm, so this wheel is listed for the 2024-2026 Ranger Raptor only. It is not a fit for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use a 6x135 pattern. Because this wheel's 106.1mm bore is larger than the Ranger Raptor hub, hub-centric rings are used to center it. The Ranger Raptor lug thread is M12x1.5, and lug nuts are not listed with this wheel. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Rebound 17x8.5 wheel in double black pairs a concave eight-spoke design with ICON-optimized dimensions. This listing is the 17 x 8.5, 6x5.5 bolt pattern, 25mm offset version with 5.75in of backspacing and a 95.1mm center bore. It is listed here for the Ranger Raptor.
Built around ICON-optimized dimensions. ICON says the Rebound is engineered to maximize brake caliper clearance and to position the wheel for unhindered suspension travel and steering. Its backspacing and offset are set to reduce scrub radius, which ICON ties to better handling and ride quality, and it is meant to complement an ICON Vehicle Dynamics suspension system.
Aluminum alloy construction. ICON describes the Rebound as aluminum alloy construction with strength properties well suited to off-road use, and says the reduced unsprung weight and rotating mass improve on- and off-road performance.
Specifications (as published by ICON).
- Size: 17x8.5
- Bolt pattern: 6x5.5
- Offset: 25mm
- Backspacing: 5.75in
- Center bore: 95.1mm
- Finish: Double Black
- ICON part number: 1817859057DB
Features
- Concave eight-spoke Rebound design in double black
- Aluminum alloy construction suited to off-road use
- Reduced unsprung weight and rotating mass for better on- and off-road performance
- Application-specific dimensions to optimize vehicle dynamics and tire clearance
Fitment: ICON publishes this wheel as 17 x 8.5, 6x5.5 with a 25mm offset and 5.75in backspacing and does not name vehicles. The 6x5.5 pattern (6x139.7) is used by the Ford Ranger Raptor, whose hub bore is 93.1 mm, so this wheel is listed for the 2024-2026 Ranger Raptor only. It is not a fit for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use a 6x135 pattern. Because this wheel's 95.1mm bore is larger than the Ranger Raptor hub, hub-centric rings are used to center it. The Ranger Raptor lug thread is M12x1.5, and lug nuts are not listed with this wheel. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Rebound 17x8.5 wheel in bronze pairs a concave eight-spoke design with ICON-optimized dimensions. This listing is the 17 x 8.5, 6x5.5 bolt pattern, 25mm offset version with 5.75in of backspacing and a 95.1mm center bore. It is listed here for the Ranger Raptor.
Built around ICON-optimized dimensions. ICON says the Rebound is engineered to maximize brake caliper clearance and to position the wheel for unhindered suspension travel and steering. Its backspacing and offset are set to reduce scrub radius, which ICON ties to better handling and ride quality, and it is meant to complement an ICON Vehicle Dynamics suspension system.
Aluminum alloy construction. ICON describes the Rebound as aluminum alloy construction with strength properties well suited to off-road use, and says the reduced unsprung weight and rotating mass improve on- and off-road performance.
Specifications (as published by ICON).
- Size: 17x8.5
- Bolt pattern: 6x5.5
- Offset: 25mm
- Backspacing: 5.75in
- Center bore: 95.1mm
- Finish: Bronze
- ICON part number: 1817859057BR
Features
- Concave eight-spoke Rebound design in bronze
- Aluminum alloy construction suited to off-road use
- Reduced unsprung weight and rotating mass for better on- and off-road performance
- Application-specific dimensions to optimize vehicle dynamics and tire clearance
Fitment: ICON publishes this wheel as 17 x 8.5, 6x5.5 with a 25mm offset and 5.75in backspacing and does not name vehicles. The 6x5.5 pattern (6x139.7) is used by the Ford Ranger Raptor, whose hub bore is 93.1 mm, so this wheel is listed for the 2024-2026 Ranger Raptor only. It is not a fit for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use a 6x135 pattern. Because this wheel's 95.1mm bore is larger than the Ranger Raptor hub, hub-centric rings are used to center it. The Ranger Raptor lug thread is M12x1.5, and lug nuts are not listed with this wheel. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Rebound 17x8.5 wheel in titanium pairs a concave eight-spoke design with ICON-optimized dimensions. This listing is the 17 x 8.5, 6x5.5 bolt pattern, 0mm offset version with 4.75in of backspacing and a 106.1mm center bore. It is listed here for the Ranger Raptor.
Built around ICON-optimized dimensions. ICON says the Rebound is engineered to maximize brake caliper clearance and to position the wheel for unhindered suspension travel and steering. Its backspacing and offset are set to reduce scrub radius, which ICON ties to better handling and ride quality, and it is meant to complement an ICON Vehicle Dynamics suspension system.
Aluminum alloy construction. ICON describes the Rebound as aluminum alloy construction with strength properties well suited to off-road use, and says the reduced unsprung weight and rotating mass improve on- and off-road performance.
Specifications (as published by ICON).
- Size: 17x8.5
- Bolt pattern: 6x5.5
- Offset: 0mm
- Backspacing: 4.75in
- Center bore: 106.1mm
- Finish: Titanium
- ICON part number: 1817858347TT
Features
- Concave eight-spoke Rebound design in titanium
- Aluminum alloy construction suited to off-road use
- Reduced unsprung weight and rotating mass for better on- and off-road performance
- Application-specific dimensions to optimize vehicle dynamics and tire clearance
Fitment: ICON publishes this wheel as 17 x 8.5, 6x5.5 with a 0mm offset and 4.75in backspacing and does not name vehicles. The 6x5.5 pattern (6x139.7) is used by the Ford Ranger Raptor, whose hub bore is 93.1 mm, so this wheel is listed for the 2024-2026 Ranger Raptor only. It is not a fit for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use a 6x135 pattern. Because this wheel's 106.1mm bore is larger than the Ranger Raptor hub, hub-centric rings are used to center it. The Ranger Raptor lug thread is M12x1.5, and lug nuts are not listed with this wheel. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Rebound 17x8.5 wheel in satin black pairs a concave eight-spoke design with ICON-optimized dimensions. This listing is the 17 x 8.5, 6x5.5 bolt pattern, 0mm offset version with 4.75in of backspacing and a 106.1mm center bore. It is listed here for the Ranger Raptor.
Built around ICON-optimized dimensions. ICON says the Rebound is engineered to maximize brake caliper clearance and to position the wheel for unhindered suspension travel and steering. Its backspacing and offset are set to reduce scrub radius, which ICON ties to better handling and ride quality, and it is meant to complement an ICON Vehicle Dynamics suspension system.
Aluminum alloy construction. ICON describes the Rebound as aluminum alloy construction with strength properties well suited to off-road use, and says the reduced unsprung weight and rotating mass improve on- and off-road performance.
Specifications (as published by ICON).
- Size: 17x8.5
- Bolt pattern: 6x5.5
- Offset: 0mm
- Backspacing: 4.75in
- Center bore: 106.1mm
- Finish: Satin Black
- ICON part number: 1817858347SB
Features
- Concave eight-spoke Rebound design in satin black
- Aluminum alloy construction suited to off-road use
- Reduced unsprung weight and rotating mass for better on- and off-road performance
- Application-specific dimensions to optimize vehicle dynamics and tire clearance
Fitment: ICON publishes this wheel as 17 x 8.5, 6x5.5 with a 0mm offset and 4.75in backspacing and does not name vehicles. The 6x5.5 pattern (6x139.7) is used by the Ford Ranger Raptor, whose hub bore is 93.1 mm, so this wheel is listed for the 2024-2026 Ranger Raptor only. It is not a fit for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use a 6x135 pattern. Because this wheel's 106.1mm bore is larger than the Ranger Raptor hub, hub-centric rings are used to center it. The Ranger Raptor lug thread is M12x1.5, and lug nuts are not listed with this wheel. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Rebound 17x8.5 wheel in double black pairs a concave eight-spoke design with ICON-optimized dimensions. This listing is the 17 x 8.5, 6x5.5 bolt pattern, 0mm offset version with 4.75in of backspacing and a 106.1mm center bore. It is listed here for the Ranger Raptor.
Built around ICON-optimized dimensions. ICON says the Rebound is engineered to maximize brake caliper clearance and to position the wheel for unhindered suspension travel and steering. Its backspacing and offset are set to reduce scrub radius, which ICON ties to better handling and ride quality, and it is meant to complement an ICON Vehicle Dynamics suspension system.
Aluminum alloy construction. ICON describes the Rebound as aluminum alloy construction with strength properties well suited to off-road use, and says the reduced unsprung weight and rotating mass improve on- and off-road performance.
Specifications (as published by ICON).
- Size: 17x8.5
- Bolt pattern: 6x5.5
- Offset: 0mm
- Backspacing: 4.75in
- Center bore: 106.1mm
- Finish: Double Black
- ICON part number: 1817858347DB
Features
- Concave eight-spoke Rebound design in double black
- Aluminum alloy construction suited to off-road use
- Reduced unsprung weight and rotating mass for better on- and off-road performance
- Application-specific dimensions to optimize vehicle dynamics and tire clearance
Fitment: ICON publishes this wheel as 17 x 8.5, 6x5.5 with a 0mm offset and 4.75in backspacing and does not name vehicles. The 6x5.5 pattern (6x139.7) is used by the Ford Ranger Raptor, whose hub bore is 93.1 mm, so this wheel is listed for the 2024-2026 Ranger Raptor only. It is not a fit for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use a 6x135 pattern. Because this wheel's 106.1mm bore is larger than the Ranger Raptor hub, hub-centric rings are used to center it. The Ranger Raptor lug thread is M12x1.5, and lug nuts are not listed with this wheel. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Rebound 17x8.5 wheel in bronze pairs a concave eight-spoke design with ICON-optimized dimensions. This listing is the 17 x 8.5, 6x5.5 bolt pattern, 0mm offset version with 4.75in of backspacing and a 106.1mm center bore. It is listed here for the Ranger Raptor.
Built around ICON-optimized dimensions. ICON says the Rebound is engineered to maximize brake caliper clearance and to position the wheel for unhindered suspension travel and steering. Its backspacing and offset are set to reduce scrub radius, which ICON ties to better handling and ride quality, and it is meant to complement an ICON Vehicle Dynamics suspension system.
Aluminum alloy construction. ICON describes the Rebound as aluminum alloy construction with strength properties well suited to off-road use, and says the reduced unsprung weight and rotating mass improve on- and off-road performance.
Specifications (as published by ICON).
- Size: 17x8.5
- Bolt pattern: 6x5.5
- Offset: 0mm
- Backspacing: 4.75in
- Center bore: 106.1mm
- Finish: Bronze
- ICON part number: 1817858347BR
Features
- Concave eight-spoke Rebound design in bronze
- Aluminum alloy construction suited to off-road use
- Reduced unsprung weight and rotating mass for better on- and off-road performance
- Application-specific dimensions to optimize vehicle dynamics and tire clearance
Fitment: ICON publishes this wheel as 17 x 8.5, 6x5.5 with a 0mm offset and 4.75in backspacing and does not name vehicles. The 6x5.5 pattern (6x139.7) is used by the Ford Ranger Raptor, whose hub bore is 93.1 mm, so this wheel is listed for the 2024-2026 Ranger Raptor only. It is not a fit for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use a 6x135 pattern. Because this wheel's 106.1mm bore is larger than the Ranger Raptor hub, hub-centric rings are used to center it. The Ranger Raptor lug thread is M12x1.5, and lug nuts are not listed with this wheel. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
These Eibach Pro-Lift-Kit HD 1000 rear springs are a pair of coil springs made for the 2024-2026 Ford Ranger Raptor Double Cab with the 3.0L twin-turbo V6 and four-wheel drive. They raise the back of the truck and carry the extra weight of gear and accessories, so the rear stays at its intended height instead of squatting under load.
Built for a loaded rear end. The HD rate is stiffer than a standard lift spring. Bumpers, a bed rack, recovery gear or a camping setup add weight behind the axle, and this spring is made to hold ride height with that weight on board. Eibach rates the heights from an empty truck up to a 1,000 lb load, and recommends running the kit only at the fully loaded height.
Made to work with the factory shocks. Eibach designs these springs to use the original FOX electronic shocks, so the Raptor's adaptive damping stays in place.
More room for bigger tires. Added height at the rear gives extra fender clearance for larger wheels and tires, and the added ground clearance helps on rough trails.
Made in the USA. Eibach builds these springs in the United States and backs them with a five-year warranty.
Features
- Set of 2 rear coil springs
- Heavy-duty spring rate for loaded trucks
- Added ground clearance and fender clearance
- Designed for the original FOX electronic shocks
- Made in the USA with a five-year warranty
Fitment: 2024-2026 Ford Ranger Raptor Double Cab, 3.0L twin-turbo V6, 4x4. Fitment confirmed against Eibach's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Compression in Double Black is a 17 x 8.5 wheel with a 6x5.5 (6x139.7) bolt pattern, a 25mm offset, 5.75in backspacing and a 95.1mm center bore. It is listed here for the 2024-2026 Ford Ranger Raptor, the one Raptor that runs a 6x139.7 pattern.
A bold, concave look. ICON combines sharp lines and a concave spoke design with black rock ring bolts around the lip, in dimensions ICON describes as optimized to improve both the form and function of a Jeep, truck or SUV.
Dimensions tuned for fitment. ICON engineered the Compression to maximize caliper clearance and position the wheel for unhindered suspension travel and steering. The backspacing and offset are set to reduce scrub radius, which ICON says improves handling and ride quality.
Center bore. The 95.1mm bore is larger than the Ranger Raptor's 93.1mm hub, so hub-centric rings are needed to center the wheel on the hub.
Lower offset than factory. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Studs and hardware. The Ranger Raptor uses M12x1.5 lug studs. ICON's page does not list lug nuts with this wheel, so plan to order them separately.
Features
- 17 x 8.5 size, 6x5.5 (6x139.7) bolt pattern, 25mm offset, 5.75in backspacing, 95.1mm bore
- Aluminum alloy construction suited to off-road use, per the supplier listing
- Reduced unsprung weight and rotating mass, per the supplier listing
- Concave spoke design with rock ring bolts
- Double Black finish
- Application-specific dimensions for vehicle dynamics and tire clearance
Fitment: ICON publishes this wheel as 17 x 8.5, 6 x 5.5 with a 25mm offset and 5.75in backspacing and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor, the only Raptor with a 6x139.7 (6x5.5) bolt pattern and a 93.1mm center bore (the wheel's bore must be equal or larger). Fitment decided by bolt pattern and center bore against Ford's Raptor hub specs. It does not fit the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use 6x135.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
This ICON center cap assembly is a direct replacement cap for 17 inch ICON Alloys Alpha, Rebound and Compression wheels in the 6x5.5 bolt pattern. It is listed for the 2024-2026 Ford Ranger Raptor because that is the Raptor that uses a 6x5.5 (6x139.7) wheel pattern, and it fits when those ICON wheels are on the truck.
Direct replacement. If a cap is lost, scuffed or damaged, this complete assembly swaps in for the original on the matching ICON wheel.
Easy installation. New mounting bolts are included, so you do not need to source hardware.
Low-profile design. The cap has a low profile and carries the ICON Vehicle Dynamics shield badge on a black finish.
Features
- Complete center cap assembly for 17 inch ICON Alpha, Rebound or Compression wheels with a 6x5.5 bolt pattern
- Mounting bolts included
- Low-profile design
Fitment: This cap fits ICON wheels, not a vehicle directly. ICON lists it as a replacement for any 17 inch Alpha, Rebound or Compression wheel in 6x5.5 and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor only through those 6x5.5 ICON wheels, since the Ranger Raptor is the only Raptor with a 6x139.7 (6x5.5) bolt pattern. It does not fit 18 or 20 inch ICON wheels, and it is not for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use 6x135.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
- Choosing a selection results in a full page refresh.
- Opens in a new window.