Welcome to RaptorsOnly.com
-
Brands
Shop by brand
- 3D MAXpider
- Access
- Addictive Desert Designs
- Advan
- AEM Induction
- aFe
- Air Lift
- Airaid
- Alcon
- AlphaRex
- AMP Research
- AMS
- Anderson Composites
- ANZO
- ARB
- Atturo Tire
- AutoMeter
- AVS
- AWE Tuning
- BackRack
- Baer Brakes
- Baja Designs
- BAK
- Banks Power
- BBK
- BBS
- BD Diesel
- Belltech
- Bestop
- BFGoodrich
- BMC
- Body Armor 4x4
- Borla
- Brembo
- Brembo OE
- Bully Dog
- Bushwacker
- Camburg
- Clevite
- COBB
- Cometic Gasket
- COMP Cams
- CORSA Performance
- Covercraft
- CSF
- DBA
- DeatschWerks
- DFC
- Diode Dynamics
- DS18
- DV8 Offroad
- Eaton
- EBC
- Eibach
- Enkei
- Extang
- Fabtech
- Fel-Pro
- fifteen52
- Firestone
- Flowmaster
- Ford Racing
- Forgestar
- FORM Lighting
- FOX
- Garrett
- Gates
- GEN-Y Hitch
- Go Fast Bits
- Go Rhino
- Gram Lights
- Granatelli Motor Sports
- GSC Power Division
- Hawk Performance
- Hella
- Hellwig
- Hotchkis
- Husky Liners
- ICON
- Injen
- J&L
- JBA
- JLT
- K&N Engineering
- KC HiLiTES
- King Engine Bearings
- King Shocks
- Kleinn Air Horns
- Kooks Headers
- KYB
- LIQUI MOLY
- LUND
- Magnaflow
- Mahle OE
- Maxtrac
- Mayhem
- MBRP
- McGard
- Method Wheels
- MGP
- Michelin
- Mickey Thompson
- Mishimoto
- Moog
- Motul
- MTX Wheels
- N-Fab
- Nacho Offroad Technology
- NGK
- Nitrous Express
- Odyssey Battery
- ORACLE Lighting
- PowerStop
- Putco
- QA1
- Raceline
- Radium Engineering
- Rally Armor
- Rampage
- Raxiom
- Retrax
- Rhino-Rack
- Ridetech
- Rigid Industries
- Rival 4x4
- RockJock
- Roll-N-Lock
- Roush
- Royal Purple
- SCT Performance
- Skyjacker
- Snow Performance
- SPC Performance
- SPOD
- Stainless Works
- Superlift
- Superpro
- Timbren
- Torque Solution
- TOYO
- Truxedo
- Tuff Country
- Turbosmart
- UMI Performance
- Undercover
- Volant
- Vossen
- Wagner Tuning
- WeatherTech
- Weld
- Westin
- Whiteline
- Wilwood
- Yokohama Tire
- Yukon Gear & Axle
- Zone Offroad
No brands found. Try another name or initial.
156 brands
View all brands -
F-150 Raptor
- F-150 Raptor
-
1st Gen (2010-2014)
-
2nd Gen (2017-2020)
-
3rd Gen (2021-Present)
-
Raptor R (2023-Present)
-
Bronco Raptor
- Bronco Raptor
-
Suspension
-
Lighting
-
Bumpers & Armor
-
Racks
-
Interior Accessories
-
Exterior Accessories
-
Performance
-
Wheels & Tires
-
Brakes
-
Drivetrain
-
Engine & Cooling
-
Ranger Raptor
- Ranger Raptor
-
Suspension
-
Lighting
-
Bumpers & Armor
-
Racks
-
Interior Accessories
-
Exterior Accessories
-
Performance
-
Wheels & Tires
-
Brakes
-
Drivetrain
-
Engine & Cooling
Your cart
Subheading
Product comparison
Describe you product comparison grid
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
17 products
17 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$50.00
$50.00
$3,799.95
The FOX Factory Race Series 2.5 Live Valve Internal Bypass rear coilover (part 883-06-246) is a bolt-on rear suspension upgrade for the 2024-2026 Ford Ranger Raptor. It keeps the truck's Live Valve electronics in the loop, so the damping is still adjusted for you as the terrain changes, while adding the oil capacity and internal bypass tuning that FOX builds into its race-bred shocks.
Semi-active damping that works with the truck. FOX designed this coilover to plug into the factory electronics, so there is no separate controller to add. Live Valve reads the position of the shock and changes damping force on the fly for a calmer ride on pavement and more control when the pace picks up.
Internal bypass for progressive control. In the middle of the stroke, fluid slips past the main piston through bleed holes, which keeps the ride comfortable. Once the shock travels beyond that ride zone in compression or rebound, the bleed holes close off and fluid is forced through the piston, building force progressively. That helps manage hard bottom-outs, softens harsh top-outs and gives the truck a catch when it lands from a jump.
Built to take heat and pressure. The 2.5-inch aluminum bodies are Type II anodized, which stands up to higher shock pressures and resists corrosion. Finned reservoirs add oil capacity, and an internal floating piston (IFP) inside each reservoir helps prevent cavitation during hard use.
Adjustable ride height. A threaded preload collar lets you fine-tune the ride height to suit your setup. The listing for this part is sold as a 0-1in lift rear coilover.
Features
- FOX Factory Race Series 2.5 Live Valve Internal Bypass design
- Rear coilover for the Ford Ranger Raptor
- Semi-active, position-sensitive damping
- Plug-and-play integration with OEM electronics
- Multiple zones of damping control from the internal bypass
- Type II anodized 2.5-inch aluminum body
- Finned reservoir with IFP to prevent cavitation
- Threaded preload collar for ride height adjustment
Fitment: Ford Ranger Raptor, model years 2024-2026, rear position. Fitment confirmed against FOX's published application list.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$3,699.95
The FOX 3.0 Factory Race Series front coilover with internal bypass, part 883-06-233, is a direct bolt-on replacement for the factory front shocks on the 2010-2014 Ford F-150 SVT Raptor. It is built to keep the truck composed and controlled when the pace picks up off-road, while staying comfortable on everyday trail driving. The coilovers are pre-set to give the truck a 2 inch lift right out of the box.
Race-bred damping. FOX builds this shock around the same components it uses in its Trophy Truck shocks: Eibach coil springs, stainless steel shafts, PTFE-lined spherical bearings, proprietary racing oil and high-temperature Viton seals. That means parts proven in extreme use, now on your Raptor.
More control through the whole stroke. The internal bypass, position-sensitive design uses the full wheel travel, adds oil capacity and gives 60 percent more damping area than the stock FOX SVT shocks. The result is a plush, predictable ride over normal terrain with the ability to ramp up damping force when you push hard.
Cooler, more consistent performance. Large 2.5 inch remote reservoirs connect with a big -10 hose, which increases the shock's cooling capacity so damping stays consistent over long, rough runs.
Tunable and strong. The integrated coil spring adjusts for preload and ride height, and the reservoir adjusters let you fine tune compression damping for your weight, terrain and speed. Heavy-duty steel bodies are paired with anodized billet aluminum components, and the shocks are designed to bolt onto your factory mounts.
Features
- Internal bypass, position-sensitive damping across the full wheel travel
- 60 percent more damping area than the stock FOX SVT shocks
- Pre-set to level the truck with a 2 inch lift
- Spring preload and ride height adjustable on the integrated coil spring
- Large 2.5 inch remote reservoirs with a -10 hose
- Eibach springs, stainless steel shafts and PTFE-lined spherical bearings
- High-temperature Viton seals and proprietary racing oil
- Steel bodies with anodized billet aluminum components
- Bolts onto the factory mounts
Fitment: Front position, 2010-2014 Ford F-150 SVT Raptor. Fitment confirmed against FOX's published application list.
Guides & Manuals
Owner's ManualTechnical Drawing
Installation Instructions
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
$4,199.95
The FOX 3.0 Factory Race Series Live Valve Internal Bypass front coilover shock is a direct replacement for the front suspension of the 2019-2020 Ford F-150 Raptor. It pairs FOX's race-proven internal bypass damping with Live Valve, a semi-active system that reads the truck's own sensors and adjusts damping on the fly. This listing is for the front position.
Live Valve adapts as you drive. Using vehicle sensors and accelerometers, Live Valve reacts to inertia, steering, braking and acceleration inputs to balance handling, comfort and bottom-out resistance. The system plugs into the factory electronics.
Internal bypass damping for big-travel feel. FOX's position-sensitive internal bypass lets oil flow around the piston at some points of the stroke and builds firm resistance at others. The result is a floated ride through rough terrain with strong support deep in the travel.
Quick-switch tuning. Three-way QS3 adjusters let you set the shock for on-road performance, on-road comfort or off-road performance, with rebound and compression handled through the same quick switch design.
Built to shed heat. A finned external cooling reservoir helps the shock keep its performance during long, fast desert running, while the 3-inch and 2.5-inch aluminum bodies and 7/8-inch shafts with redundant seals are made for harsh conditions.
Easier installation. Rotatable hose fittings make routing the reservoir hoses simpler, and ORB O-ring port fittings give a solid seal.
Features
- Live Valve terrain-adaptive semi-active technology, plug and play with factory electronics
- Patented position-sensitive internal bypass damping
- Quick Switch (QS3) compression and rebound adjusters
- Finned external reservoir system dissipates heat fast
- Rotatable hose fittings and ORB O-ring port fittings
- Redundant sealing system for long-lasting performance
- 17-4 H900 stainless steel shaft
- Teflon-lined, heat-treated spherical bearings
- Black anodized CNC machined aluminum components and durable zinc-plated seamless alloy body
- 100% serviceable and tunable for a longer service life
- Performance tuned specifically for the Raptor
Fitment: Front position, 2019-2020 Ford F-150 Raptor. Fitment confirmed against FOX's published application list.
Guides & Manuals
Installation ManualThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2020 | Ford | F-150 | Raptor |
$3,499.95
The FOX 3.0 Factory Race Series front coilovers replace the factory front shocks on the 2010-2014 Ford F-150 SVT Raptor with a race-proven internal bypass design. Each shock pairs a 3 inch steel body with a remote reservoir, so the oil stays cooler and the damping stays consistent when you are pushing hard over rough ground.
Built from FOX's race program. FOX says these coilovers use the same components as its Trophy Truck shocks, including Eibach springs, stainless steel shafts, PTFE-lined spherical bearings, racing oil and high-temperature Viton seals.
More damping area for the wheel travel you already have. The position-sensitive internal bypass uses the full stroke, adds oil capacity, and gives about 60% more damping area than the stock FOX SVT shocks. The result is a plush, predictable ride at normal off-road speeds that firms up when the terrain gets extreme.
Remote reservoir for heat control. A large 2.5 inch remote reservoir on a -10 hose adds cooling capacity, which helps the shock hold its performance on long, fast runs.
Adjustable ride height. The integrated coil spring adjusts for preload and ride height, and it comes pre-set to level the truck from the box. FOX lists a 0-2 inch lift range for this part.
Bolts to the factory mounts. The shocks are designed to fit the stock mounting points, so no custom fabrication is needed.
Key dimensions (per FOX). 3 inch body diameter, 7.53 inches of travel, 20.44 inches compressed and 27.97 inches extended, with eyelet bottom mounts.
Features
- Coil-over internal bypass, position-sensitive design
- Steel body with anodized billet aluminum components
- 2.5 inch remote reservoir with -10 hose
- Adjustable preload and ride height, 0-2 inch lift
- Eibach springs, stainless steel shafts, PTFE-lined spherical bearings, Viton seals
- Front position coilover set
Fitment: 2010-2014 Ford F-150 SVT Raptor. Fitment confirmed against FOX's published application list.
Guides & Manuals
Installation InstructionsTechnical Drawing
Installation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
$1,679.95
If you are building a Raptor for more suspension travel, the upper control arms are usually the first place to start. The FOX Billet Upper Control Arm in black is a bolt-on replacement designed specifically for the 2017-2026 Ford F-150 Raptor, giving the front end more room to cycle while keeping alignment where it belongs.
Built for the Raptor's geometry. FOX engineers studied the front suspension of this truck and shaped the arm around it, rather than adapting a generic design. When a truck is lifted or leveled, factory alignment settings drift; these arms are made to bring them back into range while still allowing plenty of droop for off-road articulation.
Added caster for stability. The extra caster built into the arm helps cut high-speed wander, so the truck feels settled on fast gravel and washboard. Expect a more precise, comfortable ride on rough roads and trails.
Adjustable for fine tuning. Fully adjustable heim joints let you dial in caster and camber during alignment, which is useful if you change tire size or ride height down the road.
Made in the USA from billet aluminum. Each arm is CNC machined from T6061 billet aluminum, finished with Type II anodizing for corrosion resistance, and marked with a laser-etched FOX logo.
Features
- Bolt-on installation with no modification to the vehicle chassis
- Stainless-steel taper misalignment spacers and 12-point bolts at the steering knuckle for a reliable, precise fit
- 3/4 in. chromoly heim joints, fully adjustable for caster and camber
- Kevlar fiber reinforced PTFE liner to prevent binding and give long-lasting precision
- 1.25 in. uniballs with a hard chrome plated ball and low carbon steel race for longer service life
- PTFE liner in the uniball to keep noise down and the ride comfortable
- CNC machined T6061 billet aluminum with Type II anodized black finish
Fitment: Front upper control arm for the Ford F-150 Raptor, model years 2017 through 2026. Fitment confirmed against FOX's published application list.
Guides & Manuals
Installation InstructionsInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
$1,679.95
The FOX billet upper control arm (part 803-35-021) is a bolt-on front suspension upgrade built specifically for the 2024-2026 Ford Ranger Raptor. It replaces the factory upper arm with a CNC-machined billet aluminum arm that is designed to correct alignment once the truck is lifted and to open up more droop travel for off-road driving.
Alignment correction for a lifted truck. Raising a vehicle pushes the factory alignment out of specification. FOX engineered this arm around the Ranger Raptor's suspension geometry so the added caster brings the truck back in line while leaving room for the suspension to droop and articulate over rough terrain.
More caster for high-speed stability. The extra caster helps reduce steering wander at speed, so the truck tracks straighter and feels more settled on fast dirt roads, washboard and trails.
Fine-tune caster and camber. Fully adjustable 3/4 in. chromoly heim joints let you dial in caster and camber during your alignment, and a Kevlar-reinforced PTFE liner helps prevent binding while keeping the joint precise over time.
Built from billet in the USA. Each arm is CNC machined in the USA from T6061 billet aluminum, finished with Type II anodizing for corrosion resistance, and marked with a laser-etched FOX logo.
Precise, quiet ball joint. The 1.25 in. uniball pairs a hard chrome plated ball with a low carbon steel race for long service life, and its PTFE liner keeps noise down for a comfortable ride.
Straightforward installation. Stainless-steel taper misalignment spacers and 12-point bolts secure the arm at the steering knuckle, and it bolts on without any modification to the vehicle chassis.
Features
- Designed specifically for the 2024-2026 Ford Ranger Raptor front upper position
- CNC machined T6061 billet aluminum with Type II anodized finish
- Fully adjustable 3/4 in. chromoly heim joints for caster and camber
- 1.25 in. hard chrome plated uniball with PTFE liner
- Kevlar-reinforced PTFE liner resists binding
- Stainless-steel taper misalignment spacers and 12-point knuckle bolts
- Bolt-on fit, no chassis modification
- Laser-etched FOX logo, made in the USA
Fitment: FOX lists this upper control arm for the Ford Ranger Raptor, model years 2024-2026, front upper position. Fitment confirmed against FOX's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$1,679.95
The FOX 803-35-020 is a black billet aluminum front upper control arm built for the 2024-2026 Ford Ranger Raptor. It replaces the factory upper arm and is designed to keep the truck's alignment in check once the suspension is lifted, while freeing up more downward wheel travel for rough terrain.
Restores alignment after a lift. Raising a vehicle pushes the factory alignment out of specification. FOX engineered this arm around the Ranger Raptor's own suspension geometry so it can correct for that change and keep the front end tracking properly.
More droop and better high-speed manners. The arm is designed to maximize droop travel for added articulation off-road. Extra caster built into the design helps cut down on wander at speed, which makes the truck feel steadier on rough roads and trails.
Built from machined billet. Each arm is CNC machined in the USA from T6061 billet aluminum, then finished with Type II anodizing for corrosion resistance and a laser-etched FOX logo.
Adjustable for fine tuning. Chromoly heim joints let you dial in caster and camber, and a PTFE liner reinforced with Kevlar fiber helps prevent binding while holding up over time.
Bolts on without chassis changes. Stainless-steel taper misalignment spacers and 12-point bolts at the steering knuckle give a precise, secure fit with no modification to the vehicle chassis.
Features
- Black anodized T6061 billet aluminum, CNC machined in the USA
- 3/4 in. chromoly heim joints, fully adjustable for caster and camber
- Kevlar fiber reinforced PTFE liner to prevent binding
- 1.25 in. uniballs with a hard chrome plated ball and low carbon steel race for longer service life
- PTFE liner helps keep noise down for a comfortable ride
- Stainless-steel taper misalignment spacers and 12-point bolts at the knuckle
- Position: front upper
Fitment: FOX lists this arm for the 2024-2026 Ford Ranger Raptor. Fitment confirmed against FOX's published application list.
Guides & Manuals
Installation InstructionsFOX Guide for 803-35-020 / 803-35-021
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$1,679.95
This FOX billet upper control arm (part 803-35-019) replaces the factory front upper arm on the Ford F-150 Raptor. It is built to restore proper alignment and keep suspension travel working when the truck is built for tougher terrain, and it bolts on without chassis modification.
Corrects alignment on a modified truck. Raising or re-tuning a Raptor's front suspension pushes the factory alignment out of range. FOX engineered this arm specifically for the intended vehicle so alignment can be brought back while droop travel and articulation are preserved.
More caster for high-speed confidence. The added caster helps cut down steering wander at speed, which gives a more precise, comfortable feel on rough roads and trails.
Built to be adjusted. Fully adjustable 3/4 in. chromoly heim joints let you fine-tune caster and camber, and a Kevlar fiber reinforced PTFE liner resists binding and keeps the joint precise over time.
Machined and finished in the USA. Each arm is CNC machined from T6061 billet aluminum, then Type II anodized for corrosion resistance and marked with a laser etched FOX logo.
Features
- CNC machined in the USA from T6061 billet aluminum with Type II anodized finish
- 3/4 in. chromoly heim joints, fully adjustable for caster and camber
- Kevlar fiber reinforced PTFE liner to prevent binding
- 1.25 in. uniball with a hard chrome plated ball and low carbon steel race for longer service life; PTFE liner keeps noise down
- Stainless-steel taper misalignment spacers and 12-point bolts at the steering knuckle for a precise fit
- Bolt-on installation with no modification to the vehicle chassis
- Laser etched FOX logo
Fitment: FOX lists this front upper control arm for the Ford F-150 Raptor, model years 2017 through 2026. Fitment confirmed against FOX's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
$4,199.95
These FOX Factory Race Series 3.2 Live Valve Internal Bypass shocks (part 883-06-183) are a bolt-on pair for the third-generation Ford F-150 Raptor, 2021 through 2026. FOX lists them for the rear position, and they connect to the truck's factory electronics so the Live Valve system keeps adjusting damping on its own. They are built to give the Raptor more control when the terrain gets rough, without a harsh ride on the road.
Semi-active damping that reads the terrain. Live Valve adjusts damping as conditions change, and FOX designs this kit to work plug-and-play with the OEM electronics, so no separate controller is needed.
Internal bypass for multiple damping zones. Oil moves around the main piston through bleed holes while the shock is in its ride zone, which keeps the truck settled over everyday bumps. Once the shaft travels past that zone, the holes close off and the fluid is forced through the main piston. The result is progressively more force to stop hard bottom-outs, soften top-outs and give the truck a catch when it lands.
Recirculating reservoirs to keep temperatures down. A checked piston keeps oil moving between the finned external reservoir and the shock body, which helps keep the shock cool during long, hard runs.
Corrosion-resistant 3.2-inch aluminum bodies. FOX uses Type II anodizing on the bodies so they can handle higher internal pressures and resist corrosion.
Adjust it by hand. Three-way quick switch (QS3) adjusters sit on the eyelets, so you can fine-tune the feel to your driving and load.
Features
- FOX Factory Race Series 3.2 Live Valve Internal Bypass design
- Semi-active, position-sensitive damping with plug-and-play OEM electronics integration
- Multiple zones of damping control from patented Internal Bypass technology
- Finned external recirculating reservoirs
- 3.2-inch Type II anodized aluminum bodies
- 3-way quick switch (QS3) adjusters on the eyelets
- Sold as a pair, rear position
Fitment: FOX publishes this part for the 2021-2026 Ford F-150 Raptor. FOX notes that it does not fit Dual Valve equipped trucks. Fitment confirmed against FOX's published application list.
Guides & Manuals
FOX Instructions (605-01-366)Installation Instructions
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
$3,999.95
The FOX Factory Race Series 3.2 Live Valve Internal Bypass front coilover (part number 883-06-245) is a bolt-on suspension upgrade for the 2024-2026 Ford Ranger Raptor. It pairs semi-active Live Valve control with FOX's internal bypass damping, so the truck stays composed on pavement and keeps control when the terrain gets rough. The Shopify listing for this part also describes it as a 2-3in lift setup.
Semi-active damping that works with your truck. Live Valve is position-sensitive, adjusting damping on the fly, and the kit plugs into the factory electronics so there is no separate controller to wire up.
Internal bypass for multiple damping zones. Fluid flows past the main piston through bleed holes while the shock is in its ride zone. Once travel moves beyond that zone in compression or rebound, the bleed holes close and fluid is forced through the main piston. The result is a soft, comfortable ride in normal use and progressively more force near the ends of travel, which helps with hard bottom-outs, harsh top-outs and landings.
Built to resist heat, pressure and corrosion. The 3.2-inch aluminum bodies have Type II anodizing to handle higher internal pressure and fend off corrosion. Finned reservoirs add oil capacity and contain an IFP (internal floating piston) to prevent cavitation.
Adjustable ride height. A threaded preload collar lets you fine-tune the stance of your Ranger Raptor.
Features
- FOX Factory Race Series 3.2 Live Valve shocks with Internal Bypass
- Front coilover application
- Semi-active, position-sensitive damping
- Plug-and-play integration with OEM electronics
- Type II anodized 3.2-inch aluminum bodies
- Finned reservoirs with IFP
- Threaded preload collar for ride height adjustment
Fitment: Fits the 2024-2026 Ford Ranger Raptor. Fitment confirmed against FOX's published application list.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$3,899.95
This is the FOX Factory Race Series rear shock set built for the 2017-2018 Ford F-150 Raptor. FOX designed the kit around the same external bypass, Quick Adjust Bypass (QAB) and external cooling technology it uses on race-winning off-road trucks, and tuned it for the second-generation Raptor so you get more capable damping without giving up everyday ride quality.
Race-bred external bypass damping. Position-sensitive external bypass control lets the shock stay supple through small and mid-stroke terrain, then build firm support deeper in the travel. The result is a truck that stays composed at speed over whoops, washboard and big hits.
Quick Adjust Bypass knobs for easy tuning. The QAB adjusters let you change the bypass feel yourself to suit load, terrain and driving style, rather than living with one fixed tune.
External reservoirs that shed heat. Each shock uses a remote reservoir with FOX's external cooling system (ECS2) to dissipate heat, which helps keep damping consistent through long, hard runs.
Built to be serviced. FOX specifies a stainless steel shaft, a redundant sealing system and spherical bearings, and the shocks are designed to be rebuilt and retuned over their lifespan rather than thrown away.
Complete set for the rear axle. You receive a left and right pair, and the product photos show the mounting hardware and brackets that ship alongside them. The shocks are listed at 12.27 inches of travel, with an extended length of 31.15 inches and a compressed length of 18.88 inches.
Features
- FOX Factory Race Series external bypass rear shocks for the Gen 2 Raptor
- Quick Adjust Bypass (QAB) knobs for easy adjustment
- External reservoir cooling system (ECS2) to dissipate heat quickly
- 12.27 in travel, 2.5 in body diameter, eyelet top and bottom mounts
- Black anodized CNC machined aluminum components
- 17-4 H900 stainless steel shaft with redundant seals
- Teflon-lined, heat-treated spherical bearings
- Serviceable and tunable for a longer working life
- ORB O-ring port fittings for a secure seal
Fitment: 2017-2018 Ford F-150 Raptor, rear. Fitment confirmed against FOX's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2018 | Ford | F-150 | Raptor |
$4,099.95
This is the FOX 3.0 Factory Race Series Live Valve rear shock set, part number 883-09-153, built for the 2019-2020 Ford F-150 Raptor. It pairs FOX's internal bypass damping with semi-active Live Valve control and an external cooling system, so the rear of the truck stays controlled when you are driving fast on rough ground.
Live Valve adapts as you drive. Using vehicle sensors and accelerometers, Live Valve reacts to inertial, steering, braking and acceleration inputs and adjusts damping to balance handling, comfort and bottom-out resistance. FOX describes the integration as plug and play with the factory electronics.
Three-way quick switch adjusters. The Quick Switch (QS3) adjusters let you tune rebound and compression for on-road performance, on-road comfort or off-road performance.
External cooling for hard use. The external cooling system (ECS2) helps the shocks hold their performance during long, fast runs, such as desert driving. Rotatable hose fittings make routing the reservoir hoses easier during installation.
Built from race-proven materials. FOX lists a 3.0 inch impact-extruded, CNC-machined 6061-T6 hard-anodized aluminum body, a 7/8 inch hard chrome plated 17-4 H900 stainless steel shaft, a hard-anodized billet aluminum high-flow race piston, and a redundant seal pack (main seal, wiper seal and scraper seal).
Specifications from FOX. Series: Factory Race. Travel: 12.19 inches. Extended length: 31.18 inches. Compressed length: 18.99 inches. Top and bottom mounts: eyelet. Position: rear. Mounting hardware is included.
Features
- Live Valve semi-active technology with plug and play integration to the factory electronics
- Rebound and compression adjustable through Quick Switch (QS3) technology
- FOX patented, position-sensitive internal bypass damping
- External cooling system (ECS2) with rotatable hose fittings
- Application-specific valving for the Raptor
- PTFE-lined, heat-treated alloy steel spherical bearings
- Mounting hardware included
Fitment: 2019-2020 Ford F-150 Raptor, rear. Fitment confirmed against FOX's published application list.
Guides & Manuals
Owner's ManualInstallation Instructions
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2020 | Ford | F-150 | Raptor |
$3,599.95
This is a pair of FOX 3.0 Factory Series rear shocks built for the 2010-2014 Ford F-150 SVT Raptor (part number 883-09-241). Each shock pairs a large external reservoir with adjustable bypass tuning, so you can firm up or soften the rear of the truck to match the terrain you are driving.
Built to use the whole wheel travel. FOX describes its Factory 3.0 external bypass shocks as position-sensitive, meaning the damping changes as the shock moves through its stroke. FOX says this design adds oil capacity and about 60% more damping area than the stock FOX SVT shocks.
Tunable bypass zones. FOX developed this shock family with three independently tunable bypass zones, so you can keep a plush, predictable ride on normal trails and still ramp up damping force for harder, faster driving. The orange adjuster knobs sit on the bypass tubes where you can reach them.
Cooler running with a remote reservoir. A large 2.5 inch remote reservoir adds cooling capacity, which helps the shock hold consistent damping during long, rough runs.
Race-bred construction. FOX says these shocks use the same core components as its Trophy Truck shocks: steel shock shafts, PTFE-lined spherical bearings, proprietary racing oil and high-temperature Viton seals. They are designed to bolt onto the factory mounts, and FOX suggests pairing them with aftermarket leaf springs and bump stop kits to get the most from the SVT Raptor.
Features
- Rear shock set for the 2010-2014 Ford F-150 SVT Raptor
- External bypass design with independently tunable bypass zones
- Large 2.5 inch remote reservoir for added cooling
- Position-sensitive damping across the full wheel travel
- Steel shafts, PTFE-lined spherical bearings and Viton seals
- Bolts onto the factory mounts
Fitment: FOX lists this part for the Ford F-150 SVT Raptor, model years 2010 through 2014, rear position. Fitment confirmed against FOX's published application list.
Guides & Manuals
Installation InstructionsTechnical Drawing
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
$3,899.95
The FOX 3.0 Factory Series front coilover set, part 883-06-140, is a direct upgrade for the 2017-2018 Ford F-150 Raptor. It pairs FOX's internal bypass damping with Dual Speed Compression (DSC) adjusters and finned remote reservoirs, so the truck rides well on the street and stays composed when the pace picks up off-road.
Tunable compression damping. The DSC adjusters let you set low-speed and high-speed compression separately, so you can tune the front end for your weight, terrain and speed instead of living with one fixed setting.
Cooler, more consistent performance. FOX describes a recirculating reservoir bridge and a finned remote reservoir on this kit. Both are meant to improve cooling efficiency, which helps keep damping steady during long, hard runs.
Internal bypass control. FOX's bypass design lets oil flow around the piston at certain points in the stroke and builds firm resistance at others. The result is a supple ride in the middle of the travel with strong support near the ends.
Built to be serviced. Each coilover is serviceable and tunable, so it can be rebuilt and revalved over its life rather than replaced.
Features
- Factory Race Series front coilover set for the Gen 2 Raptor
- Dual Speed Compression (DSC) adjusters
- Finned remote reservoirs with recirculating reservoir bridge
- Internal bypass damping technology
- Redundant sealing system
- 17-4 H900 stainless steel shaft
- ORB O-ring port fittings
- Black anodized CNC machined aluminum components
- Teflon-lined, heat-treated spherical bearings
- Zinc plated seamless alloy body
Fitment: 2017-2018 Ford F-150 Raptor, front position. Fitment confirmed against FOX's published application list.
Guides & Manuals
Installation Instructions (FOX, Rev B)Installation Instructions
Technical Bulletin
Technical Drawing
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2018 | Ford | F-150 | Raptor |
$4,399.95
The FOX Factory Race Series 3.2 Live Valve Internal Bypass Coil-Over (Pair), part 883-06-182, is a bolt-on front suspension upgrade built for the third-generation Ford F-150 Raptor. It pairs FOX's internal bypass damping with semi-active Live Valve control, so the truck stays composed on pavement and keeps working when the terrain gets rough.
Semi-active Live Valve damping. FOX describes this kit as plug-and-play with the truck's factory electronics, adding position-sensitive, semi-active adjustment without a separate control system.
Internal bypass for multiple damping zones. In the ride zone, shock fluid flows around the main piston through bleed holes for a comfortable, controlled ride. As the shock travels past that zone in compression or rebound, the bleed holes close off and fluid is forced through the main piston, building force progressively to resist hard bottom-outs, prevent harsh top-outs and give landings an initial catch.
Recirculating reservoirs keep temperatures down. A finned external reservoir exchanges fluid continuously with the shock body through a checked piston, which helps hold shock temperature down during sustained hard use.
3.2-inch aluminum bodies with Type II anodizing. The anodized finish stands up to higher shock pressures and protects the bodies from corrosion.
Adjustable on the truck. 3-way quick switch (QS3) adjusters on the eyelets let you fine-tune the ride to your load and driving style.
Features
- FOX Factory Race Series 3.2 Live Valve shocks with Internal Bypass for the 3rd generation Ford F-150 Raptor
- Semi-active, position-sensitive damping with plug-and-play integration with OEM electronics
- Finned recirculating external reservoirs
- Type II anodized 3.2-inch aluminum bodies
- 3-way quick switch (QS3) adjusters on the eyelets
- Sold as a pair for the front suspension
Fitment: Fits the 2021-2026 Ford F-150 Raptor (front). FOX notes that a 0.5-inch lift is achievable with a 37-inch tire package, and that this kit does not fit trucks equipped with dual-valve shocks. Fitment confirmed against FOX's published application list.
Guides & Manuals
Installation InstructionsInstallation Instructions (supplier PDF)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.