Welcome to RaptorsOnly.com
-
Brands
Shop by brand
- 3D MAXpider
- Access
- Addictive Desert Designs
- Advan
- AEM Induction
- aFe
- Air Lift
- Airaid
- Alcon
- AlphaRex
- AMP Research
- AMS
- Anderson Composites
- ANZO
- ARB
- Atturo Tire
- AutoMeter
- AVS
- AWE Tuning
- BackRack
- Baer Brakes
- Baja Designs
- BAK
- Banks Power
- BBK
- BBS
- BD Diesel
- Belltech
- Bestop
- BFGoodrich
- BMC
- Body Armor 4x4
- Borla
- Brembo
- Brembo OE
- Bully Dog
- Bushwacker
- Camburg
- Clevite
- COBB
- Cometic Gasket
- COMP Cams
- CORSA Performance
- Covercraft
- CSF
- DBA
- DeatschWerks
- DFC
- Diode Dynamics
- DS18
- DV8 Offroad
- Eaton
- EBC
- Eibach
- Enkei
- Extang
- Fabtech
- Fel-Pro
- fifteen52
- Firestone
- Flowmaster
- Ford Racing
- Forgestar
- FORM Lighting
- FOX
- Garrett
- Gates
- GEN-Y Hitch
- Go Fast Bits
- Go Rhino
- Gram Lights
- Granatelli Motor Sports
- GSC Power Division
- Hawk Performance
- Hella
- Hellwig
- Hotchkis
- Husky Liners
- ICON
- Injen
- J&L
- JBA
- JLT
- K&N Engineering
- KC HiLiTES
- King Engine Bearings
- King Shocks
- Kleinn Air Horns
- Kooks Headers
- KYB
- LIQUI MOLY
- LUND
- Magnaflow
- Mahle OE
- Maxtrac
- Mayhem
- MBRP
- McGard
- Method Wheels
- MGP
- Michelin
- Mickey Thompson
- Mishimoto
- Moog
- Motul
- MTX Wheels
- N-Fab
- Nacho Offroad Technology
- NGK
- Nitrous Express
- Odyssey Battery
- ORACLE Lighting
- PowerStop
- Putco
- QA1
- Raceline
- Radium Engineering
- Rally Armor
- Rampage
- Raxiom
- Retrax
- Rhino-Rack
- Ridetech
- Rigid Industries
- Rival 4x4
- RockJock
- Roll-N-Lock
- Roush
- Royal Purple
- SCT Performance
- Skyjacker
- Snow Performance
- SPC Performance
- SPOD
- Stainless Works
- Superlift
- Superpro
- Timbren
- Torque Solution
- TOYO
- Truxedo
- Tuff Country
- Turbosmart
- UMI Performance
- Undercover
- Volant
- Vossen
- Wagner Tuning
- WeatherTech
- Weld
- Westin
- Whiteline
- Wilwood
- Yokohama Tire
- Yukon Gear & Axle
- Zone Offroad
No brands found. Try another name or initial.
156 brands
View all brands -
F-150 Raptor
- F-150 Raptor
-
1st Gen (2010-2014)
-
2nd Gen (2017-2020)
-
3rd Gen (2021-Present)
-
Raptor R (2023-Present)
-
Bronco Raptor
- Bronco Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
-
Ranger Raptor
- Ranger Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
Your cart
Subheading
Product comparison
Describe you product comparison grid
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
F-150 Raptor 3rd Gen
Choose a department to narrow the parts below.
Suspension
Lighting
Bumpers & Armor
Racks
Interior Accessories
Exterior Accessories
Performance
Wheels & Tires
Brakes
Drivetrain
Engine & Cooling
815 products
815 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
The MBRP Armor Pro Active muffler replacement is a 3-inch T304 stainless steel muffler swap made exclusively for the 2023-2027 Ford F-150 Raptor R with the 5.2L supercharged V8. It replaces the factory muffler while keeping the factory active valve working, so you can still switch between a more aggressive sound and a quieter daily-driving mode.
Keeps the factory active valve. The system retains the factory Active Valve function, so the exhaust mode switching continues to work as it did from the factory. MBRP notes that the exhaust valve may need a relearn through Ford's FDRS (the PCM Exhaust Tailpipe Actuator Position Relearn app).
More flow than the stock muffler. MBRP reports that dynamometer testing showed a 6% increase in flow over the OEM muffler. The tubing is precision CNC mandrel bent for unrestricted flow.
T304 stainless steel. The construction resists corrosion and rust, and the kit carries MBRP's lifetime warranty.
Bolt-on fit, better clearance. It uses the factory hanger locations, includes the clamps and hardware needed, and its design improves ground clearance.
Features
- 3-inch T304 stainless steel muffler replacement, active profile
- Retains factory active valve function
- Precision CNC mandrel-bent tubing
- MBRP dyno testing: 6% more flow than the OEM muffler
- Uses OEM hanger locations; installation hardware included
- Improved ground clearance
- Lifetime MBRP warranty
Emissions: California Proposition 65 warning applies. This is an exhaust-only part; check local rules for your area.
Fitment: 2023-2027 Ford F-150 Raptor R, 5.2L engine only, SuperCrew short box. MBRP lists this part exclusively for the Raptor R. Fitment confirmed against MBRP's published application list.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2027 | Ford | F-150 | Raptor R |
$67.19
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's 10-Year/Million Mile Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!
Technical Bulletin- REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills
This Part Fits:
Year Make Model Submodel 2023-2026 Ford F-150 Raptor 2019-2020 Ford Mustang Bullitt 2021-2023 Ford Mustang Mach 1 2015-2019 Ford Mustang Shelby GT350 2015-2019 Ford Mustang Shelby GT350R
The Injen X-Pedal Pro Black Edition is a plug-and-play throttle controller that sharpens or softens the throttle response of the 2017-2020 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost. It also covers other F-150 trucks, the 2016-2020 Chevrolet Camaro and the 2011-2020 Dodge Charger listed below.
Throttle response on demand. Nine Sport levels make the pedal feel more eager, and seven Eco levels soften it for smoother, more economical driving. It works with automatic and manual transmissions and processes the pedal signal 1,000 times per second.
Extra functions. An anti-skid setting helps tame the pedal on slippery surfaces, and a launch control mode is built in.
Simple to fit. It plugs into the vehicle harness with the included connectors, so there is no cutting or splicing, and the controller weighs about one pound.
Features
- Nine Sport and seven Eco throttle levels
- Anti-skid and launch control modes
- Plug-and-play harness connectors
- Works with automatic and manual transmissions
- 1,000 pedal-signal updates per second
Fitment: 2017-2020 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost, plus the other vehicles listed below. Fitment confirmed against Injen's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor 3.5L twin turbo |
| 2015-2020 | Ford | F-150 | 2.7L and 3.5L twin turbo |
| 2015-2019 | Ford | F-150 | 5.0L V8 |
| 2016-2020 | Chevrolet | Camaro | 2.0L turbo, 6.2L (SS) |
| 2011-2020 | Dodge | Charger | 3.6L, 5.7L, 6.4L, 6.2L supercharged (2015-2016) |
$1,716.95
ICON multi-rate leaf springs require bump stop spacer kit (PN: 95226) if ICON's hydraulic bump stop kit (PN: 95121) is not used
- “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2021 | Ford | F-150 | Raptor |
The ICON Attitude Adjustment Collar (AAC) is a front leveling kit built for the 2017-2020 Ford F-150 Raptor. It raises the front end between 0.5 and 2.25 inches over stock without taking the factory shock apart, so you can level the truck or add a little rake-correcting stance in an afternoon.
Five lift settings from one kit. A multi-height coil spring collar works with a top-load shim that ICON says can be set up five different ways, giving 0.5 to 2.25 inches of front lift. ICON describes the collar as patent pending.
Keeps the shock in its ride zone. ICON designed the collar and shim around the front-end dimensions of the second-generation Raptor. Other leveling options gain height only by preloading the coil, which ICON says puts the shock in the rebound zone at ride height and hurts ride quality. This kit is made to hold the OE shock in its working range and keep the factory ride.
Simple installation. The shock does not need to be disassembled to fit the kit, which ICON points to as a more straightforward process than other leveling options. The collar also has mounting holes for the 2019-2020 model-specific wire harnesses.
Built to last. The collars are CNC machined from 6061 billet aluminum with a black anodized finish for corrosion resistance. ICON backs the kit with a limited lifetime warranty against component breakage or manufacturer defect.
Features
- 0.5 to 2.25 inches of adjustable front lift over stock
- Multi-height collar plus top-load shim with five configurations
- Keeps the OE shock in the ride zone to maintain factory ride quality
- No shock disassembly required for installation
- Mounting holes for 2019-2020 model-specific wire harnesses
- CNC machined 6061 billet aluminum, black anodized finish
- Lifetime guarantee against component breakage or manufacturer defect
Fitment: ICON lists this kit for the 2017-2020 Ford Raptor (second generation). Fitment confirmed against ICON Vehicle Dynamics' published product page (part number IVD6130B).
Guides & Manuals
Installation InstructionsInstallation Instructions
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
The ICON 98562DJ is a pair of CNC-machined billet aluminum upper control arms built for the Ford F-150 Raptor. They correct front-end geometry that is thrown off when the truck is lifted or leveled, add adjustable camber and caster, and open up clearance around the suspension. The kit comes with ICON's Delta Joint in place of the factory ball joint, and it includes the hardware needed to install it.
Better geometry and on-truck alignment. ICON's double adjuster sleeves let you set camber and caster while the arms stay on the truck, so alignment changes do not mean pulling the arms off the vehicle.
Full bump and droop travel. Swapping out the OE ball joint for the Delta Joint removes the binding that limits travel. The Delta Joint pairs the durability of a ball joint with the angularity of a traditional uniball.
Built for daily driving. A zinc-plated housing gives the first layer of corrosion resistance, and a grease seal keeps dirt and water out of the joint. The metal-on-metal design is greasable, which helps it last and run quietly on the street, unlike an exposed uniball.
Strong, light billet construction. Each arm is machined from 6061 aluminum, which keeps weight down while holding up to hard off-road use. The 7/8 inch FK rod ends are PTFE lined for smooth, precise movement through the full range of travel.
Features
- CNC machined 6061 billet aluminum construction for light weight and exceptional strength
- Camber and caster adjustability allows for precise wheel alignment
- ICON double adjuster sleeves allow for on-vehicle adjustment
- Vehicle specific taper pin provides OE-like fitment
- PTFE Lined 7/8 inch FK Rod Ends for improved response
- Built in o-ring sealed dust cover cap
- Features ICON's patented Delta Joint
Fitment: ICON describes this kit as made for the 2010-2020 Ford Raptor. Ford built the F-150 Raptor in 2010-2014 (SVT Raptor) and again in 2017-2020, so those are the model years listed below. ICON publishes no separate vehicle list for this part; fitment confirmed against the application stated on ICON's product page.
Guides & Manuals
Installation InstructionsInstallation Instructions
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
| 2010-2014 | Ford | F-150 | SVT Raptor |
The ICON 1.5-inch Rear Bump Stop Spacer Kit is built for 2017-2020 Ford F-150 Raptors that run ICON Multi-Rate Leaf Springs. It drops the factory rear bump stops 1.5 inches so the stock stops sit where they should once the springs are changed.
Keeps correct suspension travel. ICON says the spacers reposition the stock bump stops to maintain proper travel and let you keep using the OE bump stops without over-cycling the ICON leaf springs. This kit is for trucks running the ICON Multi-Rate Leaf Springs, as ICON specifies.
Machined from 6061 aluminum. Each spacer is precision CNC machined from high-strength 6061 aluminum, so it is durable and adds very little weight to the rear of the truck.
Bolt-on installation. The design is a straightforward bolt-on, and the mounting hardware is included in the kit, as the photo shows: two spacers and two bolts.
Features
- Lowers the factory rear bump stops 1.5"
- Lets the stock rear bump stops be used with ICON Multi-Rate Leaf Springs
- Precision CNC machined from 6061 aluminum
- Mounting hardware included
- Simple bolt-on installation
Fitment: ICON's product page title for this part says 2010-2014, but ICON's description specifies 2017-2020 Ford F-150 Raptor models equipped with ICON Multi-Rate Leaf Springs, and ICON lists a separate part for the 2010-2014 Raptor. We used the 2017-2020 application from ICON's description. Fitment confirmed against ICON's published product description.
Guides & Manuals
Installation InstructionsInstallation Instructions
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
This ICON hardware kit is the mounting hardware that goes with the ICON Multi Rate Leaf Spring Pack, part number 198510, on the 2017-2020 Ford F-150 Raptor. If you are fitting the new leaf springs, this is the kit that lets you bolt them in.
Made to pair with the 198510 spring pack. ICON designed this kit for use with its Multi Rate Leaf Spring Pack. It is not a stand-alone suspension upgrade, so order it together with the leaf spring pack.
U-bolts and hardware in one kit. The kit includes U-bolts and all the hardware needed, so you are not hunting for fasteners in the middle of the install.
Specific to the Raptor. ICON lists this kit for the 2017-2020 Ford Raptor pickup.
Features
- Use in conjunction with ICON leaf spring pack 198510
- Includes U-bolts and all hardware
- Listed by ICON for the 2017-2020 Ford Raptor pickup
Fitment: ICON lists this kit for the 2017-2020 Ford Raptor pickup. Fitment confirmed against ICON Vehicle Dynamics' published product listing for part 95225H.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
The ICON 198510 multi-rate leaf spring is a direct bolt-in replacement for the factory rear leaf pack on the 2017-2020 Ford F-150 Raptor. It is built to ride slightly softer than stock, then stiffen up when you add weight, so one spring suits a bare truck or a fully loaded build.
Smoother over rough ground. ICON set the base spring rate a little lighter than factory, since the stock rate runs stiff on small, choppy terrain. The result is better ride quality and extra droop travel at the rear axle.
Three spring rates in one kit. An add-in leaf ships with the spring. Swapping it in or adding it to the pack raises the rate by 20% or 40% over the as-shipped setting. On the Raptor, the as-shipped Option 1 gives about +1.00 in. of lift over stock unloaded, Option 2 about +2.25 in. unloaded, and Option 3 about +3.00 in. unloaded, according to ICON. Option 2 holds about +1.00 in. with a 400 lb constant load, and Option 3 holds about +0.50 in. with an 850 lb constant load. That suits spare tires, chase racks, roof-top tents and other added rear weight.
Built to last off-road. A triple military wrap on the front eyelet and a half wrap on the rear eyelet add strength and durability. A rebound leaf helps limit axle wrap, and leaf separators and tip inserts cut noise and friction.
- "ICON 1K" tested under rigorous off-road conditions to validate tune, performance, strength, and durability
- Leaf separators and tip inserts reduce noise and friction while increasing ride comfort
- Triple military wrap front eyelet and rear half wrap for increased durability
- Direct bolt-in to OEM spring location makes for an easy install
- 3 user-adjustable spring rates for unique vehicle setups
- Rebound leaf reduces severe axle wrap
Emissions: Not an emissions-controlled part. Prop 65 warning applies per the supplier listing.
Fitment: ICON lists this leaf spring for the 2017-2020 Ford F-150 Raptor. ICON also approves it on 2021-2026 F-150 XL, XLT, STX, Lariat, King Ranch, Platinum and Tremor models, not the Raptor, when used with ICON 2.5 Aluminum Series rear shocks. Fitment confirmed against ICON's published application information.
Guides & Manuals
Installation InstructionsInstallation Instructions
Installation Instructions
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
The Go Fast Bits T9464 is a VTA (vent to atmosphere) valve for the 2017-2020 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost, and for the 2013-2020 F-150 with the 2.7L or 3.5L EcoBoost. It replaces the factory diverter so boost pressure is released to the atmosphere, giving the classic blow-off sound.
Works with the factory system. The valve keeps the factory ECU and solenoid in use, so it is a bolt-in change with no tune. A stainless bracket matches the original diverter mount.
Engineered by GFB. The valve uses GFB's TMS technology and is made in Australia. A blanking plug is included for the factory recirculation port.
Features
- Vent-to-atmosphere design with blow-off sound
- Stainless bracket that matches the OEM diverter mount
- Blanking plug included
- Keeps the factory ECU and solenoid
- Made in Australia
Emissions
GFB lists no CARB approval for this valve, and venting to atmosphere is not legal on emissions-controlled road vehicles in California or other CARB states. Prop 65 warning applies.
Fitment: 2017-2020 Ford F-150 Raptor with the 3.5L EcoBoost, plus the 2013-2020 F-150 2.7L and 3.5L EcoBoost. Fitment confirmed against GFB's published application list.
Guides & Manuals
Installation InstructionsProduct Flyer
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor 3.5L EcoBoost |
| 2013-2020 | Ford | F-150 | 2.7L and 3.5L EcoBoost |
These Eibach Pro-Lift-Kit front springs raise the front of a 2023-2026 Ford F-150 Raptor R with the 5.2L supercharged V8. The kit is a set of two coil springs that swap in for the factory fronts, so you gain ride height and tire clearance without spacers or a coilover conversion.
Front-only lift for the Raptor R. This part is a front lift only: it changes the front springs and leaves the rear alone. Eibach lists it for the 4WD Raptor R only.
Keeps the factory suspension working. The springs are designed to work with the stock upper mounts and control arms, and Eibach says they preserve the full range of suspension travel and avoid the extra stress on bushings and ball joints that spacer lifts can add.
Made for the factory electronic shocks. Eibach notes the kit is designed to be used with the original FOX electronic shocks, so the stock damper setup stays in place.
Built in the USA with a five-year warranty. Eibach makes these springs in the U.S. and covers them for five years against defects in material and workmanship under normal use.
Features
- Set of 2 front coil springs
- Front lift only, for the 2023-2026 F-150 Raptor R 5.2L Supercharged 4WD
- More ground clearance and room for larger wheels and tires
- Designed to use the factory FOX electronic shocks
- Made in the U.S.A.
- Five-year Eibach warranty
Emissions
Prop 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. See www.P65Warnings.ca.gov.
Fitment: Eibach lists this kit for the 2023-2026 Ford F-150 Raptor R 5.2L Supercharged 4WD (3rd Gen). Eibach states it does not guarantee fitment, height or warranty on unlisted applications. Fitment confirmed against Eibach's published application list.
Guides & Manuals
Installation Instructions (D4209)This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2026 | Ford | F-150 | Raptor R |
The Eibach Pro-Lift-Kit for the 2023-2026 Ford F-150 Raptor R is a set of four coil springs that raises the truck 2.5 inches in front and 1.5 inches in the rear. It is built for Raptor R owners who want more clearance and a more aggressive stance without swapping the factory shocks or other suspension parts.
A lift that keeps the factory hardware. The springs replace the stock coils and work with the factory upper mounts and control arms, so the truck keeps its original suspension geometry and ride character instead of relying on spacers.
Made for the factory Fox electronic shocks. Eibach designs this kit around the Raptor R's OE Fox electronic shocks. Eibach does not guarantee fitment, ride height or warranty coverage on applications it does not list.
More room for bigger tires. The added ride height gives extra fender clearance for larger wheels and tires. Check clearance for your exact wheel and tire size, since some owners trim plastic wheel well liners or skid plate edges when running very large tires.
Ground clearance for off-road driving. Raising the ride height adds clearance under the truck for trails, washouts and rough terrain, while Eibach designs the kit for good on-road stability and handling.
Features
- Set of 4 coil springs: front and rear pairs for the Raptor R
- 2.5 inch front lift and 1.5 inch rear lift
- Retains the factory upper mounts and control arms
- Designed to work with the OE Fox electronic shocks
- Made in the U.S.A.
- Five-year Eibach warranty
Warning: Eibach lists a California Proposition 65 warning for this product: it can expose you to chemicals known to the State of California to cause cancer and reproductive harm.
Fitment: Eibach lists this kit for the 2023-2026 Ford F-150 Raptor R with the 5.2L supercharged engine, 4WD, 3rd generation. Fitment confirmed against Eibach's published application list.
Guides & Manuals
Installation InstructionsEibach Warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2026 | Ford | F-150 | Raptor R |
These Eibach Pro-Lift-Kit front springs raise the front end of a 2023-2026 Ford F-150 Raptor R by swapping the factory coil springs for taller, race-developed ones. The kit is front only and comes as a set of two springs, so you get more ground clearance and more room for bigger wheels and tires without changing the rest of the front suspension.
A lift that keeps the factory hardware. Because the springs drop in where the originals sit, the stock upper mounts and control arms stay in the truck. There are no spacers stacked on the strut, so the suspension keeps its full travel and your bushings and ball joints are not asked to work at new angles.
Built for the Raptor R's electronic shocks. Eibach designed this kit to be used with the original Fox electronic shocks, so you keep the adaptive damping the truck came with instead of replacing it with a coilover system.
Ride and handling. The goal is a lift with a tasteful amount of added height while keeping on-road stability and handling close to stock, which matters on a truck that spends its week on pavement and its weekend on the trail.
Made in the U.S.A. and backed by a warranty. Eibach builds these springs in the United States and covers them with a five-year warranty against defects in material and workmanship (coatings excluded) on passenger cars and light-duty trucks under normal use.
Features
- Set of 2 front coil springs, front only
- Increases front ground clearance
- More fender clearance for larger wheels and tires
- Keeps the stock upper mounts and control arms
- Designed to use the original Fox electronic shocks
- Made in the U.S.A.
- Five-year warranty
Emissions and safety. This is a chassis part with no emissions content. Prop 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. See www.P65Warnings.ca.gov.
Fitment: 2023-2026 Ford F-150 Raptor R with the 5.2L supercharged V8, 4WD. Eibach lists no other vehicle for this part and does not guarantee fitment on unlisted applications. Fitment confirmed against Eibach's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2026 | Ford | F-150 | Raptor R 5.2L Supercharged 4WD |
The Eibach Pro-Alignment Kit is a set of machined camber and caster adjusters for the front suspension of the Ford F-150. Lifting or lowering a truck changes the geometry of the front end, and once the change is large enough the factory alignment settings can no longer be reached. This kit gives your alignment shop the extra range to bring the front wheels back into specification after a suspension change.
Adds adjustment range where the stock parts run out. Eibach lists the kit as a camber nut and bracket set that provides about 1.0 degree of camber and 1.5 degrees of caster adjustment at the front. That is the margin a shop needs to set a Raptor that sits higher or lower than stock.
Helps protect your tires. Camber that is out of range wears the inside or outside edge of a tire quickly. Getting the angles back where they belong keeps the tread wearing evenly and the truck tracking straight.
Suited to daily driving or tuned setups. The larger adjustment window lets an experienced alignment technician fine-tune the settings for road use or for a more performance-minded setup, instead of only returning to the factory numbers.
Backed by the maker. Eibach covers the kit with a two-year warranty against defects in material and workmanship under normal use.
Features
- Camber nut and bracket kit for the front suspension
- About +/-1.0 degree of camber and +/-1.5 degrees of caster adjustment
- Wider adjustment range than the factory hardware
- Helps prevent uneven tire wear after a lift or lowering kit
- Two-year Eibach warranty
Emissions: Not an emissions-related part. California Proposition 65 warning applies: Cancer and Reproductive Harm, www.P65Warnings.ca.gov.
Fitment: For the Raptor, Eibach lists the 2010-2014 F-150 SVT Raptor and the 2017-2018 F-150 Raptor. Eibach does not list the 2019-2020 F-150 Raptor, the 2021 and newer F-150 Raptor or the Raptor R for this kit. The table also shows the other F-150 applications Eibach names. Fitment confirmed against Eibach's published application list.
Guides & Manuals
Installation InstructionsWarranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2009-2013 | Ford | F-150 | 4WD (excludes SVT Raptor) |
| 2009-2013 | Ford | F-150 | 2WD |
| 2004-2008 | Ford | F-150 | 2WD |
| 2014 | Ford | F-150 | 4WD |
| 2014 | Ford | F-150 | 2WD |
| 2015-2020 | Ford | F-150 | SuperCrew 3.5L V6 EcoBoost 4WD |
| 2017-2018 | Ford | F-150 | Raptor |
| 2015-2020 | Ford | F-150 | 3.5L V6 EcoBoost 2WD |
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2018-2020 | Ford | F-150 | Diesel 2WD |
| 2015-2020 | Ford | F-150 | SuperCrew 2.7L V6 EcoBoost 4WD |
| 2015-2020 | Ford | F-150 | 2.7L V6 EcoBoost 2WD |
| 2021-2026 | Ford | F-150 | SuperCrew 3.5L V6 EcoBoost 4WD (excludes vehicles with CCD electronic suspension) |
| 2021-2026 | Ford | F-150 | SuperCrew 2.7L V6 EcoBoost 2WD (excludes vehicles with CCD electronic suspension) |
| 2021-2026 | Ford | F-150 | SuperCrew 3.5L V6 EcoBoost 2WD (excludes vehicles with CCD electronic suspension) |
| 2015-2020 | Ford | F-150 | SuperCrew 5.0L 4WD |
| 2021-2026 | Ford | F-150 | PowerBoost SuperCrew 3.5L Hybrid 4WD (excludes vehicles with CCD electronic suspension) |
| 2021-2026 | Ford | F-150 | SuperCrew 5.0L 2WD (excludes vehicles with CCD electronic suspension) |
| 2015-2020 | Ford | F-150 | SuperCrew 5.0L 2WD |
This EBC Stage 9 kit pairs Yellowstuff 4000 series pads with USR fine-slotted rotors for the rear brakes of the 2022-2026 Ford Bronco Raptor. It is EBC's most aggressive street-and-track kit in this family, supplied as one matched set for drivers who want more bite and better heat handling than a standard setup.
Matched pads and rotors. Yellowstuff is an aramid-fiber compound that works from cold and self-seats after installation thanks to its Brake-In surface coating. EBC's high-friction formula is described as improving braking by up to 40% over OE. The pad has a slotted face for cooling and for collecting dust and debris. The pad outline drawing lists a rear pad roughly 149 mm long, 52 mm tall and 16.2 mm thick.
Rotors built for heat. The USR fine-slotted rotors expel gas, dust, debris and moisture more efficiently than a plain rotor, and they are rated to run at up to 800-900 degrees centigrade. A corrosion-resistant silver-gray coating extends service life, and each rotor is inspected and balanced for smooth running.
Right for the job. BuyBrakes lists the kit for performance street driving, street and track events and towing with oversized tires. It is a performance setup, so expect more brake dust than a standard pad.
- Yellowstuff 4000 series high-friction aramid-fiber pads
- Brake-In coating for fast bed-in
- USR fine-slotted vented rotors with corrosion-resistant coating
- Rotors inspected for runout and balanced
- Rear axle kit: pads and rotors supplied together
Fitment: Ford Bronco Raptor 2022-2026 (3.0L), plus other Ford F-150 2021-2026 (2.7L, 3.0L, 3.5L, 5.0L, and 3.3L for 2021-2023; EBC notes 336 mm rear), Ford Expedition 2022-2024 and 2026 (3.5L) and Lincoln Navigator 2022-2024 (3.5L), as listed below. Fitment confirmed against EBC's published application list.
Guides & Manuals
Installation InstructionsWarranty Information
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Ford | Bronco | Raptor (3.0L) |
| 2021-2026 | Ford | F-150 | 2.7L, 3.0L, 3.5L, 5.0L (336 mm rear) |
| 2021-2023 | Ford | F-150 | 3.3L (336 mm rear) |
| 2022-2024 | Ford | Expedition | 3.5L |
| 2026 | Ford | Expedition | 3.5L |
| 2022-2024 | Lincoln | Navigator | 3.5L |
This EBC Stage 2 kit pairs Greenstuff 2000 series pads with USR slotted rotors for the rear brakes of the 2022-2026 Ford Bronco Raptor. The pads and rotors come together as one matched set, so you can refresh the rear axle in a single purchase with parts designed to work with each other.
Matched pads and rotors. Greenstuff is EBC's quiet, low-dust street-performance compound. It is slotted to keep the pad face flat and to clear gas and debris, and it carries a Brake-In surface coating for instant bed-in after installation. EBC describes up to 20% better braking than OEM pads. The pad outline drawing lists a rear pad roughly 149 mm long, 52 mm tall and 16.2 mm thick.
Rotors that stay quiet and resist cracking. The USR rotors use a high-carbon gray-iron casting that helps limit heat cracking, brake shudder and the high-frequency vibration behind squeal. Fine slots expel gas and debris and maintain a flat pad wear surface. The rotors are coated, inspected for runout and balanced before they leave EBC.
Right for the job. Greenstuff suits drivers who want a noticeable street upgrade without a lot of brake dust or noise. BuyBrakes rates it as a street-performance setup with medium dust.
- Greenstuff 2000 series organic pads with Brake-In coating
- USR fine-slotted vented rotors
- Slotted pad design to keep a flat wear surface
- Rotors inspected for runout and balanced
- Rear axle kit: pads and rotors supplied together
Fitment: Ford Bronco Raptor 2022-2026 (3.0L), plus other Ford F-150 2021-2026 (2.7L, 3.0L, 3.5L, 5.0L, and 3.3L for 2021-2023; EBC notes 336 mm rear), Ford Expedition 2022-2024 and 2026 (3.5L) and Lincoln Navigator 2022-2024 (3.5L), as listed below. Fitment confirmed against EBC's published application list.
Guides & Manuals
Installation InstructionsWarranty Information
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Ford | Bronco | Raptor (3.0L) |
| 2021-2026 | Ford | F-150 | 2.7L, 3.0L, 3.5L, 5.0L (336 mm rear) |
| 2021-2023 | Ford | F-150 | 3.3L (336 mm rear) |
| 2022-2024 | Ford | Expedition | 3.5L |
| 2026 | Ford | Expedition | 3.5L |
| 2022-2024 | Lincoln | Navigator | 3.5L |
This EBC Stage 15 kit pairs Extra Duty pads with USR slotted rotors for the rear brakes of the 2022-2026 Ford Bronco Raptor. It is a heavy-duty set built for extreme and fleet-style duty, towing and oversized tires, and it ships as one matched kit so the pads and rotors are designed to work together.
Matched pads and rotors. The Extra Duty pad is the successor to EBC's Orangestuff line, which EBC now supplies in a red ED+ finish. It offers strong friction with a smooth bed-in and a firmer, more responsive pedal feel. EBC says it keeps performance up for longer without the brake fatigue you can get on a standard pad. The pad outline drawing lists a rear pad roughly 149 mm long, 52 mm tall and 16.2 mm thick. BuyBrakes notes the kit also includes caliper lube.
Rotors with a narrow, slotted design. The USR rotors use a narrow, multi-slot pattern that helps clear gas and debris from the pad face. They are made from cast iron with a coating, are listed as meeting OE requirements for a straight fit with the factory setup, and are manufactured in the USA.
Right for the job. BuyBrakes lists the kit for extreme and fleet duty and for towing with oversized tires. It is a high-dust setup, and the pads need regular monitoring, especially after hard use.
- Extra Duty (formerly Orangestuff) pads in EBC's red ED+ finish
- USR slotted cast-iron rotors with coating
- Firmer, more responsive pedal feel
- Direct fit with the factory configuration
- Rear axle kit: pads and rotors supplied together
Fitment: Ford Bronco Raptor 2022-2026 (3.0L), plus other Ford F-150 2021-2026 (2.7L, 3.0L, 3.5L, 5.0L, and 3.3L for 2021-2023; EBC notes 336 mm rear), Ford Expedition 2022-2024 and 2026 (3.5L) and Lincoln Navigator 2022-2024 (3.5L), as listed below. Fitment confirmed against EBC's published application list.
Guides & Manuals
Installation InstructionsWarranty Information
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Ford | Bronco | Raptor (3.0L) |
| 2021-2026 | Ford | F-150 | 2.7L, 3.0L, 3.5L, 5.0L (336 mm rear) |
| 2021-2023 | Ford | F-150 | 3.3L (336 mm rear) |
| 2022-2024 | Ford | Expedition | 3.5L |
| 2026 | Ford | Expedition | 3.5L |
| 2022-2024 | Lincoln | Navigator | 3.5L |
This EBC Stage 8 kit pairs Extra Duty pads with GD slotted and dimpled rotors for the front brakes of the 2017-2020 Ford F-150 Raptor. It is aimed at drivers who want the most bite EBC offers for performance street driving, track days, fleet-style duty cycles or towing with oversized tires, and it ships as one matched set.
Matched pads and rotors. The Extra Duty pad is the successor to EBC's Orangestuff line, which EBC now supplies in a red ED+ finish. Its compound stays stable across a wide temperature range, and the pad surface is pre-scorched so it beds in faster after installation. BuyBrakes lists the friction level at .6 hot and .5 cold, among the highest and fastest-gripping pads EBC makes. The pad outline drawing lists a pad roughly 194 mm long, 68-69 mm tall and 18.1 mm thick.
Rotors that shed heat and debris. The GD rotors have dimpled indents and straight vent slots that expel heat, water, brake dust and friction gas, and a wider vent aperture lets air pass between the two rotor faces. The metal expands evenly in use, which reduces the chance of warping. A silver-gray Geomet-style coating protects the rotors far better than the old black etch finish.
Right for the job. This is EBC's high-grip pairing for trucks that are worked hard. Expect higher brake dust than a street pad, and plan to monitor pad wear if the truck sees heavy use.
- Extra Duty (formerly Orangestuff) high-friction pads
- Pre-scorched pad surface for faster bed-in
- GD slotted and dimpled vented rotors
- Geomet-style silver-gray corrosion-resistant coating
- Front axle kit: pads and rotors supplied together
Fitment: Ford F-150 Raptor 2017-2020 (3.5L), plus other 2015-2017 Ford F-150 (2.7L, 3.5L, 5.0L), as listed below. EBC lists these applications with an electric parking brake, and the 5.0L also with a manual parking brake. Fitment confirmed against EBC's published application list.
Guides & Manuals
Installation InstructionsWarranty Information
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor (3.5L) |
| 2015-2017 | Ford | F-150 | 2.7L, 3.5L (electric parking brake) |
| 2015-2017 | Ford | F-150 | 5.0L (electric or manual parking brake) |
This EBC Stage 3 kit pairs Greenstuff 6000 series pads with GD slotted and dimpled rotors for the front brakes of the 2017-2020 Ford F-150 Raptor. The pads and rotors arrive together as one matched set, built for trucks that work hard and also get driven hard.
Matched pads and rotors. The pads use EBC's Greenstuff 6000 compound, an organic aramid-based formula that is fully shimmed, chamfered and slotted for quiet running. A red Brake-In surface coating lets them brake safely right after installation. EBC describes about 15% better braking than the OE pad, with very low rotor wear. The pad outline drawing lists a pad roughly 194 mm long, 68-69 mm tall and 18.1 mm thick.
Rotors that shed heat and debris. The GD rotors combine wide-aperture slots with blind-drilled dimples. Together they dispel gas, dust, dirt and debris and pull cooler air across the pad and rotor faces to resist fade. They are machined from a high-quality alloy rated to run at up to 800-900 degrees centigrade and finished in a corrosion-resistant silver-gray coating.
Right for the job. Greenstuff is EBC's entry-level performance upgrade for heavier trucks and SUVs, aimed at hard daily use, towing with oversized tires and performance street driving. Expect medium brake dust.
- Greenstuff 6000 series organic pads with Brake-In coating
- GD slotted and dimpled vented rotors
- Fully shimmed, chamfered and slotted pad construction
- Corrosion-resistant silver-gray rotor coating
- Front axle kit: pads and rotors supplied together
Fitment: Ford F-150 Raptor 2017-2020 (3.5L), plus other 2015-2017 Ford F-150 (2.7L, 3.5L, 5.0L), as listed below. EBC lists these applications with an electric parking brake, and the 5.0L also with a manual parking brake. Fitment confirmed against EBC's published application list.
Guides & Manuals
Installation InstructionsWarranty Information
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor (3.5L) |
| 2015-2017 | Ford | F-150 | 2.7L, 3.5L (electric parking brake) |
| 2015-2017 | Ford | F-150 | 5.0L (electric or manual parking brake) |
This EBC Stage 15 kit pairs EBC Extra Duty pads with USR slotted rotors for the rear brakes of the 2017-2018 Ford F-150 Raptor. It is built for trucks that tow, haul and run big tires, and it arrives as one matched pad-and-rotor set.
Extra Duty pads for hard use. EBC developed the Extra Duty compound for unusually high friction that still behaves well on the street. Braking is strong from the first application, and the race-bred carbon-granule-based material is rated for effective stopping above 1,400 degrees F, well beyond what heavy braking, towing or long downhill descents normally produce. EBC describes it as rotor friendly and quiet.
Fine-slotted USR sport rotors. The rotors are USR fine-slotted G3000 sport rotors finished with a Geomet anti-rust coating, fully balanced and run-out tested for smooth braking. Rear rotor: vented, 6-bolt, 348 mm diameter, 25 mm thick, with manual parking brake (per BuyBrakes' listing); FMSI pad number D1602.
Steady under load. The kit is described as holding a stable friction coefficient under load and frequent snubbing, which suits towing and off-road driving. Expect more dust than a standard pad.
- Kit contents (per BuyBrakes): 1 pair USR7603 Ultimax slotted vented rear rotors and 1 set ED91891 EBC Extra Duty pads
- Stable friction under load and frequent snubbing; suited to towing and off-roading
- Effective above 1,400 degrees F
- Geomet anti-rust coating on the rotors
- Suited to extreme and fleet duty and towing with oversized tires (per BuyBrakes)
- Pad outline per EBC drawing: 149 x 54 x 16.5 mm
Fitment: Ford F-150 Raptor 2017-2018 (3.5L, manual parking brake), plus other 2015-2020 F-150 engines (manual parking brake) and 2012-2014 F-150 6-lug trucks as listed below. 2017-2018 Raptors have a manual parking brake and 2019-2020 Raptors an electric one (Ford order guides), so this kit fits 2017-2018 Raptors. Fitment confirmed against EBC's published application list (EBC part finder).
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2018 | Ford | F-150 | Raptor (3.5L, manual parking brake) |
| 2018-2020 | Ford | F-150 | 3.0L, 3.3L (manual parking brake) |
| 2015-2020 | Ford | F-150 | 2.7L, 3.5L, 5.0L (manual parking brake) |
| 2012-2014 | Ford | F-150 | 3.5L, 3.7L, 5.0L (6-lug), 6.2L |
This EBC Stage 15 kit pairs red Extra Duty pads with USR slotted rotors for the rear brakes of the 2019-2020 Ford F-150 Raptor. It is a direct-fit set for trucks with the electric parking brake, so nothing changes over the stock setup, and the pads and rotors arrive together as one matched kit.
Matched pads and rotors. The kit includes EBC ED93037 Extra Duty pads, EBC's pad for light trucks, Jeeps and SUVs, and USR7784 Ultimax slotted rear rotors. EBC finishes its pads with a Brake-In coating so they seat quickly after installation.
Fine slots for grip and quiet. The USR rotors are vented cast iron with narrow multi-slot faces that help clear dirt, dust and debris from the pad surface. EBC says the rotors are fully balanced and run-out tested for smooth braking. Rear rotor specs per BuyBrakes' listing: 6-bolt, 336 mm diameter, 24 mm thick, 45 mm height, 90 mm centre hole; FMSI pad number D1790.
Right for the job. The Stage 15 kit is EBC's longer-lasting option for trucks that see heavier use than daily commuting, such as towing and off-road driving. Expect more brake dust than a standard pad.
- Direct fit: no changes required over the stock setup
- Extra Duty red pads for light trucks, Jeeps and SUVs
- USR slotted vented rotors
- 336 mm, 6-bolt rear rotor with 24 mm thickness
- For trucks with the electric rear parking brake
Fitment: Ford F-150 Raptor 2019-2020 (3.5L, electric parking brake), plus other 2018-2020 F-150 with the electric parking brake and 2018-2021 Ford Expedition and Lincoln Navigator, as listed below. 2017-2018 Raptors have a manual parking brake and 2019-2020 Raptors an electric one (Ford order guides), so this kit fits 2019-2020 Raptors. Fitment confirmed against EBC's published application list (EBC part finder).
Guides & Manuals
Installation InstructionsWarranty Information
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2020 | Ford | F-150 | Raptor (3.5L, electric parking brake) |
| 2018-2020 | Ford | F-150 | 2.7L, 3.0L, 3.3L, 3.5L, 5.0L (electric parking brake) |
| 2018-2021 | Ford | Expedition | 3.5L |
| 2018-2021 | Lincoln | Navigator | 3.5L |
This EBC Stage 15 kit pairs EBC Extra Duty pads with USR slotted rotors for the front brakes of the 2017-2020 Ford F-150 Raptor. It is built for trucks that tow, haul and run big tires, and it arrives as one matched pad-and-rotor set.
Extra Duty pads for hard use. EBC developed the Extra Duty compound for unusually high friction that still behaves well on the street. Braking is strong from the first application, and the race-bred carbon-granule-based material is rated for effective stopping above 1,400 degrees F, well beyond what heavy braking, towing or long downhill descents normally produce. EBC describes it as rotor friendly and quiet.
Fine-slotted USR sport rotors. The rotors are USR fine-slotted G3000 sport rotors finished with a Geomet anti-rust coating, fully balanced and run-out tested for smooth braking. Front rotor: vented, 6-bolt, 350 mm diameter, 34 mm thick (per BuyBrakes' listing); FMSI pad number D1770.
Steady under load. The kit is described as holding a stable friction coefficient under load and frequent snubbing, which suits towing and off-road driving. Expect more dust than a standard pad.
- Kit contents (per BuyBrakes): 1 pair USR7462 Ultimax slotted vented front rotors and 1 set ED93034 EBC Extra Duty pads
- Stable friction under load and frequent snubbing; suited to towing and off-roading
- Effective above 1,400 degrees F
- Geomet anti-rust coating on the rotors
- Suited to extreme and fleet duty and towing with oversized tires (per BuyBrakes)
- Pad outline per EBC drawing: 194.3 x 69.1 x 18.1 mm and 194.3 x 68.3 x 18.1 mm
Fitment: Ford F-150 Raptor 2017-2020 (3.5L, with or without electric parking brake), plus 2015-2017 F-150 with 2.7L, 3.5L or 5.0L engines (5.0L also with manual parking brake) as listed below. Fitment confirmed against EBC's published application list (EBC part finder).
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor (3.5L, with or without electric parking brake) |
| 2015-2017 | Ford | F-150 | 2.7L, 3.5L, 5.0L (with or without electric parking brake; 5.0L also manual parking brake) |
These EBC USR Ultimax slotted front rotors are a direct upgrade for the front brakes of the Ford F-150 Raptor, F-150 Raptor R and Bronco Raptor. They are sold as a 2-wheel set (a pair), and they keep the everyday driveability of a stock rotor while adding extra bite when you pair them with a high-friction pad.
Narrow multi-slot design. EBC's slotted rotors use many narrow slots that help keep dirt, debris, water and brake dust away from the pads. That keeps more of the pad in contact with the rotor for better grip, and, unlike drilled rotors, slotted rotors promote flat, parallel pad wear instead of letting ridges form on the pads and rotors.
Quality iron, made in the UK. The rotors are cast from GS3000 grey iron, chosen for its friction coefficient, thermal stability and heat transfer, and are precision machined in the UK. They carry a protective coating. Per BuyBrakes' listing, the front rotor is 350 mm in diameter and 34 mm thick.
Right for the job. EBC recommends its slotted rotors for towing, hauling, track use and sport driving. Installation and break-in should be done by a certified mechanic, as EBC advises.
- USR Ultimax slotted vented front rotors, sold as a 2-wheel set
- Narrow multi-slot design to clear debris, water and dust
- GS3000 grey iron, precision machined in the UK
- 350 mm diameter, 34 mm thick (per BuyBrakes' listing)
- Protective rotor coating
Fitment: Ford F-150 Raptor 2021-2023 (3.5L), F-150 Raptor R 2023-2026 (5.2L) and Bronco Raptor 2022-2026 (3.0L), plus other 2021-2026 F-150, 2022-2026 Expedition and 2022-2024 Navigator as listed below. Fitment confirmed against EBC's published application list (EBC part finder).
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2023 | Ford | F-150 | Raptor (3.5L) |
| 2023-2026 | Ford | F-150 | Raptor R (5.2L) |
| 2022-2026 | Ford | Bronco | Raptor (3.0L) |
| 2021-2026 | Ford | F-150 | 2.7L, 3.0L, 3.5L, 5.0L (3.3L 2021-2023 only) |
| 2022-2024, 2026 | Ford | Expedition | 3.5L |
| 2022-2024 | Lincoln | Navigator | 3.5L |
This EBC Stage 9 kit pairs Yellowstuff pads with USR fine-slotted rotors for the rear brakes of the 2019-2020 Ford F-150 Raptor. It is a direct-fit set for trucks with the electric parking brake, so nothing changes over the stock setup, and the pads and rotors arrive together as one matched kit.
Matched pads and rotors. The kit includes EBC DP43037R Yellowstuff pads and USR7784 Ultimax slotted rear rotors. Yellowstuff is EBC's high-friction street and track compound, built on aramid fibre and finished with EBC's Brake-In coating so the pads seat quickly after installation.
Fine slots, less wind noise. The USR rotors are vented cast iron with narrow multi-slot faces that help clear dirt, dust and debris from the pad surface, with less wind noise than wider-slotted sport rotors. EBC says the rotors are fully balanced and run-out tested for smooth braking. Rear rotor specs per BuyBrakes' listing: 6-bolt, 336 mm diameter, 24 mm thick, 45 mm height, 90 mm centre hole; FMSI pad number D1790.
Right for the job. This kit is aimed at performance street driving, street-and-track days and towing with larger tires. Yellowstuff is a performance pad, so expect more brake dust than a standard pad.
- Direct fit: no changes required over the stock setup
- Yellowstuff high-friction pads with Brake-In coating
- USR fine-slotted vented rotors for reduced wind noise
- 336 mm, 6-bolt rear rotor with 24 mm thickness
- For trucks with the electric rear parking brake
Fitment: Ford F-150 Raptor 2019-2020 (3.5L, electric parking brake), plus other 2018-2020 F-150 with the electric parking brake and 2018-2021 Ford Expedition and Lincoln Navigator, as listed below. 2017-2018 Raptors have a manual parking brake and 2019-2020 Raptors an electric one (Ford order guides), so this kit fits 2019-2020 Raptors. Fitment confirmed against EBC's published application list (EBC part finder).
Guides & Manuals
Installation InstructionsWarranty Information
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2020 | Ford | F-150 | Raptor (3.5L, electric parking brake) |
| 2018-2020 | Ford | F-150 | 2.7L, 3.0L, 3.3L, 3.5L, 5.0L (electric parking brake) |
| 2018-2021 | Ford | Expedition | 3.5L |
| 2018-2021 | Lincoln | Navigator | 3.5L |
This EBC Stage 9 kit pairs Yellowstuff high-friction pads with USR fine-slotted rotors for the front brakes of the 2017-2019 Ford F-150 Raptor. It is aimed at heavy, spirited street driving and the occasional track day: a matched set that delivers strong stopping power while keeping the rotors quiet, supplied together so the pads and rotors work as a pair.
Matched pads and rotors. The kit includes the DP43034R Yellowstuff pad set and a pair of USR7462 rotors for the front axle. Yellowstuff is EBC's high-friction sport compound, with a shimmed, chamfered pad design aimed at maximum brake effect. The pads carry EBC's brake-in coating, and each kit is balanced and run-out tested for smooth braking.
Fine slots, less noise. The USR rotors are G3000 iron with fine slots that help clear heat, gas and dust from the pad face while reducing the wind noise that wider slots can make. A thermic Geomet anti-rust coating protects the finish.
Specifications. JEGS lists the front rotors as 350 mm in diameter and 34 mm thick, vented, 6-bolt, with a 135 mm bolt circle and 49.5 mm height.
- Yellowstuff high-friction sport pads (DP43034R)
- USR fine-slotted vented rotors, front axle (USR7462)
- Geomet anti-rust coating
- 350 mm x 34 mm vented rotors, 6 bolt
- Suited to heavy-spirited street driving and track days
Fitment: Ford F-150 Raptor 2017-2019 (3.5L), plus other 2015-2020 Ford F-150 trims (XL, XLT, Lariat, King Ranch, Platinum, Limited, SSV and Police Responder) as listed below. Front axle only. JEGS notes mark electric or manual parking brake on some rows, so match yours before ordering. Fitment confirmed against JEGS' published application list.
Guides & Manuals
Installation InstructionsWarranty
This Part Fits (source: JEGS):
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2019 | Ford | F-150 | Raptor (3.5L) |
| 2015-2020 | Ford | F-150 | XL, XLT, Lariat, King Ranch, Platinum |
| 2016-2020 | Ford | F-150 | Limited, SSV |
| 2018-2020 | Ford | F-150 | Police Responder |
This EBC Stage 8 kit pairs red Extra Duty pads with GD slotted and dimpled rotors for the rear brakes of the 2019-2020 Ford F-150 Raptor. It is a direct-fit set for trucks with the electric parking brake, so nothing changes over the stock setup, and the pads and rotors arrive together as one matched kit.
Matched pads and rotors. The kit includes EBC ED93037 Extra Duty pads, EBC's pad for light trucks, Jeeps and SUVs, and GD7784 rear rotors. EBC finishes its pads with a Brake-In coating so they seat quickly after installation.
Rotors that shed heat and debris. The GD rotors are vented cast iron with spot-drilled dimples and slots that help clear dust, gas and debris. EBC says the rotors are fully balanced and run-out tested for smooth braking. Rear rotor specs per BuyBrakes' listing: 6-bolt, 336 mm diameter, 24 mm thick, 45 mm height, 90 mm centre hole; FMSI pad number D1790.
Right for the job. The Stage 8 kit is EBC's longer-lasting option for trucks that see heavier use than daily commuting. Check pad wear regularly on a truck that is worked hard, and note that EBC gives no warranty for race use.
- Direct fit: no changes required over the stock setup
- Extra Duty red pads for light trucks, Jeeps and SUVs
- GD slotted and dimpled vented rotors
- 336 mm, 6-bolt rear rotor with 24 mm thickness
- For trucks with the electric rear parking brake
Fitment: Ford F-150 Raptor 2019-2020 (3.5L, electric parking brake), plus other 2018-2020 F-150 with the electric parking brake and 2018-2021 Ford Expedition and Lincoln Navigator, as listed below. 2017-2018 Raptors have a manual parking brake and 2019-2020 Raptors an electric one (Ford order guides), so this kit fits 2019-2020 Raptors. Fitment confirmed against EBC's published application list (EBC part finder).
Guides & Manuals
Installation InstructionsWarranty Information
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2020 | Ford | F-150 | Raptor (3.5L, electric parking brake) |
| 2018-2020 | Ford | F-150 | 2.7L, 3.0L, 3.3L, 3.5L, 5.0L (electric parking brake) |
| 2018-2021 | Ford | Expedition | 3.5L |
| 2018-2021 | Lincoln | Navigator | 3.5L |
This EBC Stage 8 kit pairs Extra Duty pads with GD slotted and dimpled rotors for the front brakes of the 2017-2020 Ford F-150 Raptor. It is built for trucks that tow and work hard off road: a matched set designed to hold up to heat, supplied together so the pads and rotors work as a pair.
Matched pads and rotors. The kit includes the ED93034 Extra Duty pad set and a pair of GD7462 rotors for the front axle. EBC rates the Extra Duty compound for longer pad life in high-heat use, with a friction level that stays stable under load and through repeated light braking. The pads carry EBC's brake-in coating, and each kit is balanced and run-out tested for smooth braking.
Rotors that shed heat and debris. The GD rotors are G3000 iron, machined with both slots and dimples and a wide vent aperture. The pattern is meant to clear heat, gas, dust and debris from the pad face, and a Geomet anti-rust coating protects the finish.
Specifications. JEGS lists the front rotors as 350 mm in diameter and 34 mm thick, vented, 6-bolt, with a 135 mm bolt circle and 49.5 mm height.
- Extra Duty pads (ED93034) for towing and off-road use
- GD slotted and dimpled vented rotors, front axle (GD7462)
- Geomet anti-rust coating
- 350 mm x 34 mm vented rotors, 6 bolt
- Stable friction under load for longer pad life in high heat
Fitment: Ford F-150 Raptor 2017-2020 (3.5L), plus other 2015-2020 Ford F-150 trims (XL, XLT, Lariat, King Ranch, Platinum, Limited, SSV and Police Responder) as listed below. Front axle only. JEGS notes mark electric or manual parking brake on some rows, so match yours before ordering. Fitment confirmed against JEGS' published application list.
Guides & Manuals
Installation InstructionsWarranty
This Part Fits (source: JEGS):
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor (3.5L) |
| 2015-2020 | Ford | F-150 | XL, XLT, Lariat, King Ranch, Platinum |
| 2016-2020 | Ford | F-150 | Limited, SSV |
| 2018-2020 | Ford | F-150 | Police Responder |
This EBC Stage 5 kit pairs Yellowstuff pads with GD slotted and dimpled rotors for the rear brakes of the 2019-2020 Ford F-150 Raptor. It is a direct-fit set for trucks with the electric parking brake, so nothing changes over the stock setup, and the pads and rotors arrive together as one matched kit.
Matched pads and rotors. The kit includes EBC DP43037R Yellowstuff pads and GD7784 rear rotors. Yellowstuff is EBC's high-friction street and track compound, built on aramid fibre and finished with EBC's Brake-In coating so the pads seat quickly after installation.
Rotors that shed heat and debris. The GD rotors are vented cast iron with spot-drilled dimples and slots that help clear dust, gas and debris. EBC says the rotors are fully balanced and run-out tested for smooth braking. Rear rotor specs per BuyBrakes' listing: 6-bolt, 336 mm diameter, 24 mm thick, 45 mm height, 90 mm centre hole; FMSI pad number D1790.
Right for the job. This is EBC's choice for maximum street braking on light trucks, SUVs and fast street cars. It is a performance pad, so expect more brake dust than a standard pad.
- Direct fit: no changes required over the stock setup
- Yellowstuff high-friction pads with Brake-In coating
- GD slotted and dimpled vented rotors
- 336 mm, 6-bolt rear rotor with 24 mm thickness
- For trucks with the electric rear parking brake
Fitment: Ford F-150 Raptor 2019-2020 (3.5L, electric parking brake), plus other 2018-2020 F-150 with the electric parking brake and 2018-2021 Ford Expedition and Lincoln Navigator, as listed below. 2017-2018 Raptors have a manual parking brake and 2019-2020 Raptors an electric one (Ford order guides), so this kit fits 2019-2020 Raptors. Fitment confirmed against EBC's published application list (EBC part finder).
Guides & Manuals
Installation InstructionsWarranty Information
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2020 | Ford | F-150 | Raptor (3.5L, electric parking brake) |
| 2018-2020 | Ford | F-150 | 2.7L, 3.0L, 3.3L, 3.5L, 5.0L (electric parking brake) |
| 2018-2021 | Ford | Expedition | 3.5L |
| 2018-2021 | Lincoln | Navigator | 3.5L |
This EBC Stage 5 kit pairs Yellowstuff high-friction pads with GD slotted and dimpled rotors for the front brakes of the 2017-2019 Ford F-150 Raptor. It is a sport upgrade for light trucks, SUVs and fast street cars: a matched set that adds stopping power over the original equipment parts, supplied together so the pads and rotors work as a pair.
Matched pads and rotors. The kit includes the DP43034R Yellowstuff pad set and a pair of GD7462 rotors for the front axle. Yellowstuff is EBC's high-friction sport compound, with a shimmed, chamfered pad design aimed at strong bite when you lean on the brakes. The pads carry EBC's brake-in coating, and each kit is balanced and run-out tested for smooth braking.
Rotors that shed heat and debris. The GD rotors are G3000 iron with both grooves and spots machined into the face, plus a wide vent aperture. The pattern is meant to clear heat, gas, dust and debris from the pad surface, and a Geomet anti-rust coating protects the finish.
Specifications. JEGS lists the front rotors as 350 mm in diameter and 34 mm thick, vented, 6-bolt, with a 135 mm bolt circle and 49.5 mm height.
- Yellowstuff high-friction sport pads (DP43034R)
- GD slotted and dimpled vented rotors, front axle (GD7462)
- Geomet anti-rust coating
- 350 mm x 34 mm vented rotors, 6 bolt
- Suited to light trucks, SUVs and fast street driving
Fitment: Ford F-150 Raptor 2017-2019 (3.5L), plus other 2015-2020 Ford F-150 trims (XL, XLT, Lariat, King Ranch, Platinum, Limited, SSV and Police Responder) as listed below. Front axle only. JEGS notes mark electric or manual parking brake on some rows, so match yours before ordering. Fitment confirmed against JEGS' published application list.
Guides & Manuals
Installation InstructionsWarranty
This Part Fits (source: JEGS):
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2019 | Ford | F-150 | Raptor (3.5L) |
| 2015-2020 | Ford | F-150 | XL, XLT, Lariat, King Ranch, Platinum |
| 2016-2020 | Ford | F-150 | Limited, SSV |
| 2018-2020 | Ford | F-150 | Police Responder |
This EBC Stage 3 kit pairs Greenstuff 6000 Series pads with GD slotted and dimpled rotors for the rear brakes of the 2019-2020 Ford F-150 Raptor. It is a direct-fit set for trucks with the electric parking brake, so nothing changes over the stock setup, and the pads and rotors arrive together as one matched kit.
Matched pads and rotors. The kit includes EBC DP63037 Greenstuff 6000 pads and GD7784 rear rotors. Greenstuff is EBC's fast-street compound for trucks and SUVs, finished with EBC's Brake-In coating so the pads seat quickly after installation.
Rotors that shed heat and debris. The GD rotors are vented cast iron with spot-drilled dimples and slots that help clear dust, gas and debris, and a Geomet anti-rust coating protects the finish. EBC says the rotors are fully balanced and run-out tested for smooth braking. Rear rotor specs per BuyBrakes' listing: 6-bolt, 336 mm diameter, 24 mm thick, 45 mm height, 90 mm centre hole; FMSI pad number D1790.
Right for the job. EBC pitches this kit as a modest braking upgrade for SUVs and light trucks in everyday driving and light towing. Greenstuff is an organic pad with medium dust levels, so it suits a truck that is driven daily.
- Direct fit: no changes required over the stock setup
- Greenstuff 6000 Series pads with Brake-In coating
- GD slotted and dimpled vented rotors
- Geomet anti-rust coating on the rotors
- 336 mm, 6-bolt rear rotor with 24 mm thickness
- For trucks with the electric rear parking brake
Fitment: Ford F-150 Raptor 2019-2020 (3.5L, electric parking brake), plus other 2018-2020 F-150 with the electric parking brake and 2018-2021 Ford Expedition and Lincoln Navigator, as listed below. 2017-2018 Raptors have a manual parking brake and 2019-2020 Raptors an electric one (Ford order guides), so this kit fits 2019-2020 Raptors. Fitment confirmed against EBC's published application list (EBC part finder).
Guides & Manuals
Installation InstructionsWarranty Information
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2020 | Ford | F-150 | Raptor (3.5L, electric parking brake) |
| 2018-2020 | Ford | F-150 | 2.7L, 3.0L, 3.3L, 3.5L, 5.0L (electric parking brake) |
| 2018-2021 | Ford | Expedition | 3.5L |
| 2018-2021 | Lincoln | Navigator | 3.5L |
This EBC Stage 3 kit pairs Greenstuff 6000 series pads with GD slotted and dimpled rotors for the front brakes of the 2017-2020 Ford F-150 Raptor. It is the entry point of EBC's truck and SUV kit family: a matched upgrade over stock pads and rotors for trucks that see moderate upgrades and light towing, supplied as one set.
Matched pads and rotors. The kit includes the DP63034 Greenstuff 6000 series pad set and a pair of GD7462 rotors for the front axle. Greenstuff is EBC's truck and SUV compound, aimed at stronger braking than a stock pad without moving into a track-oriented formula. The pads carry EBC's brake-in coating, and each kit is balanced and run-out tested so the set runs smoothly from the first stop.
Rotors that shed heat and debris. The GD rotors are G3000 iron, machined with both slots and dimples. That pattern is meant to clear heat, gas, dust and debris from the pad face while the vented design keeps air moving between the rotor faces. A Geomet anti-rust coating protects the finish.
Specifications. JEGS lists the front rotors as 350 mm in diameter and 34 mm thick, vented, 6-bolt, with a 135 mm bolt circle and 49.5 mm height.
- Greenstuff 6000 series truck and SUV pads (DP63034)
- GD slotted and dimpled vented rotors, front axle (GD7462)
- Geomet anti-rust coating
- 350 mm x 34 mm vented rotors, 6 bolt
- Suited to moderately upgraded trucks and light towing
Fitment: Ford F-150 Raptor 2017-2020 (3.5L), plus other 2015-2020 Ford F-150 trims (XL, XLT, Lariat, King Ranch, Platinum, Limited, SSV and Police Responder) as listed below. Front axle only. JEGS notes mark electric or manual parking brake on some rows, so match yours before ordering. Fitment confirmed against JEGS' published application list.
Guides & Manuals
Installation InstructionsWarranty
This Part Fits (source: JEGS):
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor (3.5L) |
| 2015-2020 | Ford | F-150 | XL, XLT, Lariat, King Ranch, Platinum |
| 2016-2020 | Ford | F-150 | Limited, SSV |
| 2018-2020 | Ford | F-150 | Police Responder |
This EBC Stage 2 kit pairs Greenstuff 2000 pads with USR sport slotted rotors for the rear brakes of the 2017-2018 Ford F-150 Raptor. It is a direct-fit set, so no changes are needed over the stock setup, and the pads and rotors arrive as one matched kit.
Greenstuff 2000 pads. EBC's Greenstuff pads are a street-performance compound built with a Brake-In coating for fast seating after installation. EBC describes the Stage 2 upgrade kit as offering improved braking of up to 20 percent, with a feel that suits spirited driving.
Fine-slotted sport rotors. The kit uses fine-slotted G3000 USR sport rotors with a Geomet anti-rust coating, fully balanced and run-out tested for smooth braking. Rear rotor: vented, 6-bolt, 348 mm diameter, 25 mm thick, with manual parking brake (per BuyBrakes' listing); FMSI pad number D1602.
Right for the job. This is a performance-street upgrade: a step up from stock-style pads and plain rotors, with medium dust and low noise per BuyBrakes' ratings.
- Direct fit: no changes required over the stock setup
- Greenstuff 2000 pads with Brake-In coating
- Fine-slotted G3000 USR sport rotors
- Geomet anti-rust coating on the rotors
- Improved braking of up to 20 percent over the stock setup, per EBC
- Pad outline per EBC drawing: 149 x 54 x 16.5 mm
Fitment: Ford F-150 Raptor 2017-2018 (3.5L, manual parking brake), plus other 2015-2020 F-150 engines (manual parking brake) and 2012-2014 F-150 6-lug trucks as listed below. 2017-2018 Raptors have a manual parking brake and 2019-2020 Raptors an electric one (Ford order guides), so this kit fits 2017-2018 Raptors. Fitment confirmed against EBC's published application list (EBC part finder).
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2018 | Ford | F-150 | Raptor (3.5L, manual parking brake) |
| 2018-2020 | Ford | F-150 | 3.0L, 3.3L (manual parking brake) |
| 2015-2020 | Ford | F-150 | 2.7L, 3.5L, 5.0L (manual parking brake) |
| 2012-2014 | Ford | F-150 | 3.5L, 3.7L, 5.0L (6-lug), 6.2L |
This EBC Stage 2 kit pairs Greenstuff 2000 pads with USR sport slotted rotors for the rear brakes of the 2019-2020 Ford F-150 Raptor. It is a direct-fit set, so no changes are needed over the stock setup, and the pads and rotors arrive as one matched kit.
Greenstuff 2000 pads. EBC's Greenstuff pads are a street-performance compound built with a Brake-In coating for fast seating after installation. EBC describes the Stage 2 upgrade kit as offering improved braking of up to 20 percent, with a feel that suits spirited driving.
Fine-slotted sport rotors. The kit uses fine-slotted G3000 USR sport rotors with a Geomet anti-rust coating, fully balanced and run-out tested for smooth braking. Rear rotor: vented, 6-bolt, 336 mm diameter, 24 mm thick, with electric parking brake (per BuyBrakes' listing); FMSI pad number D1790.
Right for the job. This is a performance-street upgrade: a step up from stock-style pads and plain rotors, with medium dust and low noise per BuyBrakes' ratings.
- Direct fit: no changes required over the stock setup
- Greenstuff 2000 pads with Brake-In coating
- Fine-slotted G3000 USR sport rotors
- Geomet anti-rust coating on the rotors
- Improved braking of up to 20 percent over the stock setup, per EBC
- Pad outline per EBC drawing: 148.8 x 52.3 x 17.2 mm
Fitment: Ford F-150 Raptor 2019-2020 (3.5L, electric parking brake), plus 2018-2020 F-150 engines with the electric parking brake, 2018-2021 Expedition and 2018-2021 Lincoln Navigator as listed below. 2017-2018 Raptors have a manual parking brake and 2019-2020 Raptors an electric one (Ford order guides), so this kit fits 2019-2020 Raptors. Fitment confirmed against EBC's published application list (EBC part finder).
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2020 | Ford | F-150 | Raptor (3.5L, electric parking brake) |
| 2018-2020 | Ford | F-150 | 2.7L, 3.0L, 3.3L, 3.5L, 5.0L (electric parking brake) |
| 2018-2021 | Ford | Expedition | 3.5L |
| 2018-2021 | Lincoln | Navigator | 3.5L |
This EBC Stage 2 kit pairs Greenstuff 2000 pads with USR sport slotted rotors for the front brakes of the 2017-2020 Ford F-150 Raptor. It is a direct-fit set, so no changes are needed over the stock setup, and the pads and rotors arrive as one matched kit.
Greenstuff 2000 pads. EBC's Greenstuff pads are a street-performance compound built with a Brake-In coating for fast seating after installation. EBC describes the Stage 2 upgrade kit as offering improved braking of up to 20 percent, with a feel that suits spirited driving.
Fine-slotted sport rotors. The kit uses fine-slotted G3000 USR sport rotors with a Geomet anti-rust coating, fully balanced and run-out tested for smooth braking. Front rotor: vented, 6-bolt, 350 mm diameter, 34 mm thick (per BuyBrakes' listing); FMSI pad number D1770.
Right for the job. This is a performance-street upgrade: a step up from stock-style pads and plain rotors, with medium dust and low noise per BuyBrakes' ratings.
- Direct fit: no changes required over the stock setup
- Greenstuff 2000 pads with Brake-In coating
- Fine-slotted G3000 USR sport rotors
- Geomet anti-rust coating on the rotors
- Improved braking of up to 20 percent over the stock setup, per EBC
- Pad outline per EBC drawing: 194.3 x 69.1 x 18.1 mm and 194.3 x 68.3 x 18.1 mm
Fitment: Ford F-150 Raptor 2017-2020 (3.5L, with or without electric parking brake), plus 2015-2017 F-150 with 2.7L, 3.5L or 5.0L engines (5.0L also with manual parking brake) as listed below. Fitment confirmed against EBC's published application list (EBC part finder).
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor (3.5L, with or without electric parking brake) |
| 2015-2017 | Ford | F-150 | 2.7L, 3.5L, 5.0L (with or without electric parking brake; 5.0L also manual parking brake) |
This EBC Stage 14 kit pairs Greenstuff pads with matching RK smooth rotors for the rear brakes of the 2019-2020 Ford F-150 Raptor. It is a direct-fit set, so no changes are needed over the stock setup, and the pads and rotors arrive as one matched kit.
Matched pads and rotors. EBC Greenstuff 6000 pads: a modest, everyday upgrade for trucks and light SUVs, built with aramid fibre, fully shimmed, slotted and chamfered, and finished with EBC's Brake-In coating for fast seating after installation.
OEM-style rotors. The kit uses premium G3000 OEM-style smooth (plain) cast-iron rotors with a Geomet anti-rust coating, fully balanced and run-out tested for smooth braking. Rear rotor: vented, 6-bolt, 336 mm diameter, 24 mm thick, with electric parking brake (per BuyBrakes' listing); FMSI pad number D1790.
Right for the job. EBC positions Greenstuff for a modest brake improvement at normal road speeds on trucks and light SUVs, with lower noise and dust than a performance compound.
- Direct fit: no changes required over the stock setup
- Greenstuff 6000 pads with Brake-In coating
- Premium G3000 OEM-style smooth rotors
- Geomet anti-rust coating on the rotors
- Light truck and SUV upgrade kit
- Pad outline per EBC drawing: 148.8 x 52.3 x 17.2 mm
Fitment: Ford F-150 Raptor 2019-2020 (3.5L, electric parking brake), plus 2018-2020 F-150 engines with the electric parking brake, 2018-2021 Expedition and 2018-2021 Lincoln Navigator as listed below. 2017-2018 Raptors have a manual parking brake and 2019-2020 Raptors an electric one (Ford order guides), so this kit fits 2019-2020 Raptors. Fitment confirmed against EBC's published application list (EBC part finder).
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2020 | Ford | F-150 | Raptor (3.5L, electric parking brake) |
| 2018-2020 | Ford | F-150 | 2.7L, 3.0L, 3.3L, 3.5L, 5.0L (electric parking brake) |
| 2018-2021 | Ford | Expedition | 3.5L |
| 2018-2021 | Lincoln | Navigator | 3.5L |
This EBC Stage 14 kit pairs Greenstuff pads with matching RK smooth rotors for the front brakes of the 2017-2020 Ford F-150 Raptor. It is a direct-fit set, so no changes are needed over the stock setup, and the pads and rotors arrive as one matched kit.
Matched pads and rotors. EBC Greenstuff 6000 pads: a modest, everyday upgrade for trucks and light SUVs, built with aramid fibre, fully shimmed, slotted and chamfered, and finished with EBC's Brake-In coating for fast seating after installation.
OEM-style rotors. The kit uses premium G3000 OEM-style smooth (plain) cast-iron rotors with a Geomet anti-rust coating, fully balanced and run-out tested for smooth braking. Front rotor: vented, 6-bolt, 350 mm diameter, 34 mm thick (per BuyBrakes' listing); FMSI pad number D1770.
Right for the job. EBC positions Greenstuff for a modest brake improvement at normal road speeds on trucks and light SUVs, with lower noise and dust than a performance compound.
- Direct fit: no changes required over the stock setup
- Greenstuff 6000 pads with Brake-In coating
- Premium G3000 OEM-style smooth rotors
- Geomet anti-rust coating on the rotors
- Light truck and SUV upgrade kit
- Pad outline per EBC drawing: 194.3 x 69.1 x 18.1 mm and 194.3 x 68.3 x 18.1 mm
Fitment: Ford F-150 Raptor 2017-2020 (3.5L, with or without electric parking brake), plus 2015-2017 F-150 with 2.7L, 3.5L or 5.0L engines (5.0L also with manual parking brake) as listed below. Fitment confirmed against EBC's published application list (EBC part finder).
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor (3.5L, with or without electric parking brake) |
| 2015-2017 | Ford | F-150 | 2.7L, 3.5L, 5.0L (with or without electric parking brake; 5.0L also manual parking brake) |
This EBC Stage 13 kit pairs Yellowstuff pads with RK smooth rotors for the rear brakes of the 2019-2020 Ford F-150 Raptor. It is a direct-fit set for trucks with the electric parking brake, so nothing changes over the stock setup, and the pads and rotors arrive together as one matched kit.
Matched pads and rotors. The kit includes EBC DP43037R Yellowstuff pads and RK7784 Ultimax OE-style smooth rear rotors. Yellowstuff is EBC's high-friction street and track compound, built on aramid fibre and finished with EBC's Brake-In coating so the pads seat quickly after installation.
OE-style smooth rotors. The RK rotors are vented cast iron with a plain, smooth face like the factory part, and a protective coating. EBC says the rotors are fully balanced and run-out tested for smooth braking. Rear rotor specs per BuyBrakes' listing: 6-bolt, 336 mm diameter, 24 mm thick, 45 mm height, 90 mm centre hole; FMSI pad number D1790.
Right for the job. This is the most affordable way into Yellowstuff on this truck: stronger pad bite than a stock-style pad with the quiet, familiar feel of a smooth rotor. It is a performance pad, so expect more brake dust than a standard pad.
- Direct fit: no changes required over the stock setup
- Yellowstuff high-friction pads with Brake-In coating
- RK OE-style smooth vented rotors
- 336 mm, 6-bolt rear rotor with 24 mm thickness
- For trucks with the electric rear parking brake
Fitment: Ford F-150 Raptor 2019-2020 (3.5L, electric parking brake), plus other 2018-2020 F-150 with the electric parking brake and 2018-2021 Ford Expedition and Lincoln Navigator, as listed below. 2017-2018 Raptors have a manual parking brake and 2019-2020 Raptors an electric one (Ford order guides), so this kit fits 2019-2020 Raptors. Fitment confirmed against EBC's published application list (EBC part finder).
Guides & Manuals
Installation InstructionsWarranty Information
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2020 | Ford | F-150 | Raptor (3.5L, electric parking brake) |
| 2018-2020 | Ford | F-150 | 2.7L, 3.0L, 3.3L, 3.5L, 5.0L (electric parking brake) |
| 2018-2021 | Ford | Expedition | 3.5L |
| 2018-2021 | Lincoln | Navigator | 3.5L |
This EBC Stage 13 kit pairs Yellowstuff pads with matching RK smooth rotors for the front brakes of the 2017-2020 Ford F-150 Raptor. It is a direct-fit set, so no changes are needed over the stock setup, and the pads and rotors arrive as one matched kit.
Matched pads and rotors. EBC Yellowstuff pads: a high-friction, aramid-fibre street and track compound that works effectively right from cold and finishes with EBC's red Brake-In surface coating for fast bedding after installation.
OEM-style rotors. The kit uses premium G3000 OEM-style smooth (plain) cast-iron rotors with a Geomet anti-rust coating, fully balanced and run-out tested for smooth braking. Front rotor: vented, 6-bolt, 350 mm diameter, 34 mm thick (per BuyBrakes' listing); FMSI pad number D1770.
Right for the job. EBC suggests Yellowstuff for light trucks, SUVs and fast street cars where you want more stopping bite than a stock-style pad. It is a performance pad, so expect more dust than a standard pad.
- Direct fit: no changes required over the stock setup
- Yellowstuff high-friction pads with red Brake-In coating
- Premium G3000 OEM-style smooth rotors
- Geomet anti-rust coating on the rotors
- Light truck, SUV or fast street car upgrade kit
- Pad outline per EBC drawing: 194.3 x 69.1 x 18.1 mm and 194.3 x 68.3 x 18.1 mm
Fitment: Ford F-150 Raptor 2017-2020 (3.5L, with or without electric parking brake), plus 2015-2017 F-150 with 2.7L, 3.5L or 5.0L engines (5.0L also with manual parking brake) as listed below. Fitment confirmed against EBC's published application list (EBC part finder).
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor (3.5L, with or without electric parking brake) |
| 2015-2017 | Ford | F-150 | 2.7L, 3.5L, 5.0L (with or without electric parking brake; 5.0L also manual parking brake) |
EBC Yellowstuff front brake pads are a high-friction, aramid-fibre street and track pad set made for the factory front calipers on late-model Ford Raptors. This set fits the 2021-2025 F-150 Raptor, the 2023-2026 F-150 Raptor R and the 2022-2026 Bronco Raptor, and gives you more bite than a stock-style pad without giving up everyday drivability.
Strong stopping from the first touch. Yellowstuff is built to work cold. You do not need to warm the pads before they bite, and they keep gaining strength as heat builds during hard driving, which suits a Raptor that sees fast road miles, desert runs or track days.
Faster, cleaner bed-in. A red Brake-In surface coating helps the pads bed quickly after installation. EBC says full bedding can take 300 to 500 miles, depending on the condition of the rotors.
Heat stability and fade resistance. The race-developed compound is stable up to 400 degrees C (750 degrees F), the normal street maximum, and EBC rates it for zero fade at that level. Better high-speed stopping is a core goal of the compound.
A solid pad-to-backing bond. The pads use NUCAP NRS backing plates for strong pad bond strength and retention, so the friction material stays put under load.
What to expect. Yellowstuff is a performance pad, not a low-dust pad. If low dust is your priority for a daily driver, EBC points to its Redstuff line instead. For regular track driving, EBC suggests stepping up to its Bluestuff or RP and SR series.
- Brand: EBC Brakes, front disc brake pad set (aramid fibre pad material)
- Works effectively right from cold; high-friction compound; better high-speed stopping
- Race-developed zero-fade compound for street and track use
- Red Brake-In surface coating for fast initial bedding
- NUCAP NRS backing plates for pad bond strength and retention
- Stable to 400 degrees C / 750 degrees F
- N-rated (Leaf Mark) for environmental safety; ECE R90 approved
- FMSI pad number D2382; fits 350 mm front vented rotors per BuyBrakes' listing for these trucks
- Pad outline per EBC drawing: 192 x 67.4 x 16 mm
- Backed by a 1-year or 10,000-mile warranty (per BuyBrakes)
Fitment: Ford F-150 Raptor 2021-2025, F-150 Raptor R 2023-2026 and Bronco Raptor 2022-2026, plus other 2021-2026 F-150 engines, 2022-2024 and 2026 Expedition and 2022-2024 Lincoln Navigator as listed below. Fitment confirmed against EBC's published application list (EBC part finder).
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R (5.2L) |
| 2022-2026 | Ford | Bronco | Raptor (3.0L) |
| 2021-2026 | Ford | F-150 | 2.7L, 3.0L, 3.5L, 5.0L (336 mm or 350 mm rear discs) |
| 2021-2023 | Ford | F-150 | 3.3L (336 mm or 350 mm rear discs) |
| 2022-2024, 2026 | Ford | Expedition | 3.5L |
| 2022-2024 | Lincoln | Navigator | 3.5L |
This EBC Stage 9 kit pairs Yellowstuff pads with USR fine-slotted rotors for the front brakes of the 2017-2020 Ford F-150 Raptor. It is EBC's street, track and towing kit, supplied as one matched set for drivers who want more bite and better heat handling than a standard setup.
Matched pads and rotors. The kit includes the DP43034R Yellowstuff street and track pad set. Yellowstuff is an aramid-fiber compound that is fully shimmed and chamfered and carries EBC's Brake-In coating, so the pads seat faster after installation. The pad outline drawing lists a pad roughly 194 mm long, 68-69 mm tall and 18.1 mm thick.
Rotors built for heat. The USR rotors are fine-slotted vented rotors, a pattern meant to clear gas, dust and debris from the pad face. They are balanced and run-out tested for smooth braking, and a Geomet anti-rust coating protects the finish. BuyBrakes lists the kit as direct fit with no changes required over the stock setup.
Right for the job. BuyBrakes lists the kit for performance street driving, street and track events and towing with oversized tires. It is a performance setup, so expect more brake dust than a standard pad, and EBC offers no warranty in race use.
- Yellowstuff high-friction aramid-fiber pads (DP43034R)
- USR fine-slotted vented rotors, front axle
- Brake-In coating for fast bed-in
- Rotors balanced and run-out tested
- Geomet anti-rust coating
Fitment: Ford F-150 Raptor 2017-2020 (3.5L, 4WD), plus other Ford F-150 2015-2017 (2.7L, 3.5L, 5.0L) in the XL, XLT, Lariat, King Ranch, Platinum, Limited and SSV trims listed below. Front axle only: front, vented, 6-bolt rotors. Fitment confirmed against BuyBrakes' published application list.
Guides & Manuals
Installation InstructionsWarranty Information
This Part Fits (source: BuyBrakes):
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor (3.5L, 4WD) |
| 2015-2017 | Ford | F-150 | XL, XLT, Lariat (2.7L, 3.5L, 5.0L) |
| 2015-2017 | Ford | F-150 | King Ranch, Platinum (3.5L, 5.0L) |
| 2016-2017 | Ford | F-150 | Limited (3.5L) |
| 2016-2017 | Ford | F-150 | SSV (3.5L, 5.0L) |
- Choosing a selection results in a full page refresh.
- Opens in a new window.