Welcome to RaptorsOnly.com
-
Brands
Shop by brand
- 3D MAXpider
- Access
- Addictive Desert Designs
- Advan
- AEM Induction
- aFe
- Air Lift
- Airaid
- Alcon
- AlphaRex
- AMP Research
- AMS
- Anderson Composites
- ANZO
- ARB
- Atturo Tire
- AutoMeter
- AVS
- AWE Tuning
- BackRack
- Baer Brakes
- Baja Designs
- BAK
- Banks Power
- BBK
- BBS
- BD Diesel
- Belltech
- Bestop
- BFGoodrich
- BMC
- Body Armor 4x4
- Borla
- Brembo
- Brembo OE
- Bully Dog
- Bushwacker
- Camburg
- Clevite
- COBB
- Cometic Gasket
- COMP Cams
- CORSA Performance
- Covercraft
- CSF
- DBA
- DeatschWerks
- DFC
- Diode Dynamics
- DS18
- DV8 Offroad
- Eaton
- EBC
- Eibach
- Enkei
- Extang
- Fabtech
- Fel-Pro
- fifteen52
- Firestone
- Flowmaster
- Ford Racing
- Forgestar
- FORM Lighting
- FOX
- Garrett
- Gates
- GEN-Y Hitch
- Go Fast Bits
- Go Rhino
- Gram Lights
- Granatelli Motor Sports
- GSC Power Division
- Hawk Performance
- Hella
- Hellwig
- Hotchkis
- Husky Liners
- ICON
- Injen
- J&L
- JBA
- JLT
- K&N Engineering
- KC HiLiTES
- King Engine Bearings
- King Shocks
- Kleinn Air Horns
- Kooks Headers
- KYB
- LIQUI MOLY
- LUND
- Magnaflow
- Mahle OE
- Maxtrac
- Mayhem
- MBRP
- McGard
- Method Wheels
- MGP
- Michelin
- Mickey Thompson
- Mishimoto
- Moog
- Motul
- MTX Wheels
- N-Fab
- Nacho Offroad Technology
- NGK
- Nitrous Express
- Odyssey Battery
- ORACLE Lighting
- PowerStop
- Putco
- QA1
- Raceline
- Radium Engineering
- Rally Armor
- Rampage
- Raxiom
- Retrax
- Rhino-Rack
- Ridetech
- Rigid Industries
- Rival 4x4
- RockJock
- Roll-N-Lock
- Roush
- Royal Purple
- SCT Performance
- Skyjacker
- Snow Performance
- SPC Performance
- SPOD
- Stainless Works
- Superlift
- Superpro
- Timbren
- Torque Solution
- TOYO
- Truxedo
- Tuff Country
- Turbosmart
- UMI Performance
- Undercover
- Volant
- Vossen
- Wagner Tuning
- WeatherTech
- Weld
- Westin
- Whiteline
- Wilwood
- Yokohama Tire
- Yukon Gear & Axle
- Zone Offroad
No brands found. Try another name or initial.
156 brands
View all brands -
F-150 Raptor
- F-150 Raptor
-
1st Gen (2010-2014)
-
2nd Gen (2017-2020)
-
3rd Gen (2021-Present)
-
Raptor R (2023-Present)
-
Bronco Raptor
- Bronco Raptor
-
Suspension
-
Lighting
-
Bumpers & Armor
-
Racks
-
Interior Accessories
-
Exterior Accessories
-
Performance
-
Wheels & Tires
-
Brakes
-
Drivetrain
-
Engine & Cooling
-
Ranger Raptor
- Ranger Raptor
-
Suspension
-
Lighting
-
Bumpers & Armor
-
Racks
-
Interior Accessories
-
Exterior Accessories
-
Performance
-
Wheels & Tires
-
Brakes
-
Drivetrain
-
Engine & Cooling
Your cart
Subheading
Product comparison
Describe you product comparison grid
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
Fog Lights
Choose a type to refine the products below.
9 products
9 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$700.95
Fits the 2021-2026 Ford F-150 Raptor.
The Baja Designs S2 SAE Dual Fog Pocket Light Kit replaces the factory bumper fog lights with direct-fit auxiliary LED pods built for fog, dust, and other low-visibility conditions. It is a bolt-on fog pocket replacement for the Raptor bumper and is designed to meet SAE J583 fog lamp requirements.
This kit uses amber S2 SAE lights with controlled fog beam pattern and sharp cutoff. Baja Designs lists the package as four S2 SAE amber spot LED lights, with aspheric projector optics and advanced LED technology. The kit is intended to install without additional parts or bumper modifications.
- Manufacturer part number: 448171
- Four S2 SAE amber spot LED lights
- Eight mounting brackets
- Two adapter harnesses
- All necessary installation hardware
- 1,210 lumens per light pod
- 5,712 candela per light pod
- 12.42 watts per light pod
- Amber lens color
- Designed to meet SAE J583 fog lamp requirements
Installation is direct bolt-on at the factory fog pocket location. No extra bumper modifications are required. Tool sizes and step-by-step access can vary by vehicle generation, so use the correct hand tools for the truck you are working on and follow Baja Designs' installation instructions for that application.
The kit arrives with the lights, brackets, adapter harnesses, and installation hardware. Baja Designs backs the product with a limited lifetime warranty and a 30-day satisfaction guarantee. For service, this SAE product does not use uService-style user-replaceable lenses or optics; opening or tampering with the housing voids the warranty and factory repair service is required.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
$690.95
Fits 2021-2026 Ford F-150 Raptor.
The Baja Designs S2 SAE Dual Fog Pocket Light Kit replaces the factory fog lights in the Raptor’s OEM fog pockets with four auxiliary LED light pods. It is a direct bolt-on setup that uses plug-and-play adapter harnesses to connect to the factory wiring, so no cutting or permanent vehicle modification is required.
This kit is built around SAE J583 fog lamp compliance and controlled fog beam optics with a sharp top cutoff. The result is a focused auxiliary fog pattern designed for dust, fog, rain, and other poor-weather driving conditions without throwing glare back at oncoming traffic. Baja Designs notes that the SAE line uses sealed light pods, so the uService user-serviceable optics/lens feature is not available here; opening or tampering with the housing voids the warranty.
- Manufacturer part number: 448166
- (4) S2 SAE clear LED light pods
- (8) light pod mounting brackets
- (2) plug-and-play adapter wiring harnesses
- All necessary mounting hardware
- Aluminum housing with black finish
- Clear lens and white light output
- Rectangular pod design
- 1.8 in. height x 2.9 in. width per pod
- 1,210 lumens per pod; 4,840 lumens total
- 5,712 candela per pod
- 12.42 watts per pod
- 2 LEDs per pod, 8 LEDs total
- Aspheric projector optics
- Limited Lifetime Warranty
- 30-Day Satisfaction Guarantee
Installation is straightforward for a novice-level job, but it still pays to test-fit the brackets, route the harnesses cleanly, and verify the lights function correctly before buttoning everything up. No special tool sizes or torque specs were provided by the manufacturer for this part number, so those details should be confirmed during installation as needed. The kit arrives complete and is intended to be a turn-key replacement for the factory fog lights.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
$1,564.95
Baja Designs LED fog pocket replacement kit for the Ford F-150 Raptor. It replaces the factory fog lights in the front bumper fog pockets with a vehicle-specific, direct-fit lighting package that uses six total pods: two Squadron 2.0 Pro Clear Spot, two Squadron 2.0 Pro Clear Driving Combo, and two S1 Clear Wide Cornering.
This kit is built around Baja Designs' uService design, so the lenses and optics are replaceable. It also uses MoistureBlock sealing, ClearView optics, and DirectSink thermal management. The light output is 28,324 raw lumens across all six pods, with a 5000K daylight color temperature. The Squadron 2.0 Pro pods use a standard 4-pin Deutsch-style connector and include a user-selectable RGBW backlight with nine color options: red, green, blue, magenta, cyan, amber, yellow, pink, and white.
The housings are black powder-coated aluminum with hard-coated clear polycarbonate lenses, billet machined aluminum bezels, and stainless steel mounting brackets and fasteners. The system is rated IP69K, is IK10 compliant, includes built-in overvoltage protection, and is compatible with 12V-36V DC systems. Baja Designs lists a 49,930-hour LED service life expectancy.
Fits: 2021-2026 Ford F-150 King Ranch, Lariat, Platinum, Police Responder, Raptor, SSV, Tremor, XL, and XLT; 2021-2023 Ford F-150 Limited; 2024-2026 Ford F-150 STX.
- Part number: 440020
- Direct-fit fog pocket replacement kit for the front bumper
- Includes six light pods total: four Squadron 2.0 Pro and two S1
- Vehicle-specific steel fog pocket mounting brackets
- Wiring adapter harnesses for plug-and-play operation with the factory fog light switch
- 1 two-light splitter harness, 2 x 55-inch splitter harnesses, and 1 upfitter wiring harness
- Complete stainless steel mounting hardware kit
- On a 2021+ Ford F-150 Raptor, installation uses trim removal tools and common hand tools including 4mm and 5mm hex keys, 7mm, 8mm, 10mm, and 12mm sockets, 7/16-in and 9/16-in sockets and wrenches, and a T40 Torx socket
- Lightly snug the hardware before final alignment so the pods can be centered in the bumper opening
- If the truck did not come with factory OEM fog lights, the Ford OEM Raptor Gen 3 Fog Pocket fastener kit may be required
The backlight add-on harness uses the included 5-amp fuse in the fuse tap, and cycling the switch on and off changes the backlight colors. The kit is made in the USA in San Marcos, CA.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | Police Responder |
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
$1,222.95
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | Police Responder |
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
Manufacturer part number: 440019
$1,184.95
Fits 2021-2026 Ford F-150 Raptor.
This Baja Designs fog pocket kit replaces the factory fog lights with six LED light pods mounted in the bumper fog openings. It uses clear lens optics and combines Squadron Sport 2.0 and S1 lights to add forward reach and wider foreground coverage without cutting into the bumper.
The kit is built around a powder-coated black aluminum housing with a hard-coated polycarbonate clear lens, billet machined aluminum bezel, stainless steel hardware, and bracket mounts. It uses a standard 4-pin Deutsch connector, built-in overvoltage protection, DirectSink / CopperDrive direct thermal path technology, and uService field-serviceable construction with clip-in reflectors. Baja Designs lists IP69K protection, IK10 compliance, 49,930-hour expected LED lifespan, and USA manufacture in San Marcos, CA.
- Part number: 440018
- Light configuration: 2x S1 LED lights - clear wide cornering, 2x Squadron 2.0 Sport LED lights - clear driving combo, 2x Squadron 2.0 Sport LED lights - clear spot
- Included hardware: 2 vehicle-specific fog pocket mounting brackets, 2 adaptor harnesses, 1 two-light splitter harness, 2 55-inch splitter harnesses, 1 upfitter switch wiring harness, mounting hardware set
- Factory parts reused: factory bumper mounting fasteners
- Output and draw: Squadron 2.0 Sport - 3,200 raw lumens and 30 watts/2.2 amps per light; S1 - 2,320 raw lumens and 20 watts/1.42 amps per light; total output 17,440 raw lumens
- Light characteristics: clear lens, 5000K daylight natural color, RGBW backlight with 9 user-selectable colors
- Optics: Spot, Driving Combo, and Wide Cornering patterns for long-range, mid-range, and corner coverage
- Fitment note: if the vehicle was not equipped with factory fog lights, the Gen 3 Raptor fog pocket fastener kit may be required
Installation follows the factory fog pocket area and uses the supplied brackets and harnesses. Baja Designs calls for removal of the splash guard bolts, bumper support fastener, and top fog bracket bolts, then connection of the supplied harnesses and wiring to the upfitter circuit. Fasteners are left hand-tight during alignment, then re-torqued after 100 miles. The guide also notes the battery should be disconnected during wiring, and the factory bumper mounting fasteners are reused. Installation tools referenced by Baja Designs for the 2021-on Ford F-150 Raptor include a trim removal tool or flathead screwdriver, 4mm and 5mm hex keys, 7mm, 8mm, 10mm, 12mm, 7/16 in., 9/16 in. sockets, a T40 Torx socket/bit, 7/16 in. and 9/16 in. wrenches, a multimeter or test light, scissors, and pliers.
The mounting bracket provides vertical alignment adjustment in the fog pocket, which helps center the light pods in the bumper opening. If you are adding the kit to a truck that did not come with factory fog lights, confirm whether the Gen 3 Raptor fog pocket fastener kit is needed before starting the install.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | Police Responder |
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
$910.95
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
Manufacturer part number: 448053
$735.95
Fits the 2023-2026 Ford Bronco Raptor and 2021-2026 Ford F-150 Raptor.
This Baja Designs fog pocket light kit replaces the factory bumper fog lights with a dual-pod setup on each side. It combines S2 SAE fog lights for poor-weather use with S2 Pro driving/combo lights for added forward lighting, while keeping the install tied to the factory bumper pockets.
The kit uses black hard-anodized aluminum housings, clear Lexan polycarbonate lenses, and Baja Designs' ClearView optics, MoistureBlock sealing, and CopperDrive LED management. The S2 SAE pods use aspheric projector optics and are SAE J583 fog lamp compliant. The S2 Pro pods use a clear driving/combo beam pattern. The system is rated IP69K for water, dust, and submersible protection.
- Part number: 448182
- 4 LED pods total: 2 S2 SAE clear LED fog lights and 2 S2 Pro clear driving/combo LED lights
- 4 wiring harness adapters
- 4 black rock guards with Baja Designs logo
- Mounting brackets, mounting hardware, and installation sheet
- S2 SAE output: 1,210 raw lumens per pod; 12.42 watts per pod; 5,712 candela per pod
- S2 Pro output: 2,245 raw lumens per pod; 23.4 watts per pod
- Total output: 6,910 raw lumens
- Total system power draw: 71.64 watts
- Color temperature: 5000K daylight
- Pod dimensions: 1.8 in. x 2.9 in.
- Limited lifetime warranty and 30-day satisfaction money-back guarantee
Installation is direct bolt-on with the included plug-and-play harness adapters, so no splicing is required. Baja Designs notes novice-level installation. Vehicle-specific tool sizes and torque values are not specified in the part-level documentation, so follow the supplied installation sheet and the vehicle service information for your Raptor application.
Keep in mind that the SAE series pods do not use the uService replaceable lens/optics feature, and opening or tampering with the S2 SAE pods voids the manufacturer warranty. The kit arrives with the lights, adapters, rock guards, brackets, hardware, and instructions needed to mount it in the factory bumper fog pocket location.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2026 | Ford | Bronco | Raptor |
| 2021-2026 | Ford | F-150 | Raptor |
$735.95
Baja Designs S2 SAE Pro Fog Pocket Light Kit is a vehicle-specific auxiliary lighting setup for the front bumper fog light pockets on the listed Raptor and Bronco Raptor applications. It combines SAE fog output for on-road visibility with S2 Pro driving combo pods for added forward light when you need more reach off pavement.
Fits 2023-2026 Ford Bronco Raptor and 2021-2026 Ford F-150 Raptor.
This kit is built around four rectangular LED light pods, custom mounting brackets, vehicle-specific harness adapters, black rock guards with printed Baja Designs logos, and a complete mounting hardware kit. The S2 SAE pods use Baja Amber SAE fog optics with aspheric projector optics and the S2 Pro pods use clear driving combo optics. Baja Designs lists stainless steel mounting hardware, and the pod housings are black powder-coated cast aluminum.
- Manufacturer part number: 448183
- 2 S2 SAE light pods with Baja Amber SAE fog lens
- 2 S2 Pro light pods with clear driving combo lens
- 4 wiring harness adapters
- 4 black rock guards with printed Baja Designs logo
- Custom vehicle mounting brackets
- Complete mounting hardware kit
- S2 SAE: 1,210 raw lumens and 12.42W per light
- S2 Pro: 2,245 raw lumens and 23.4W per light
- SAE fog pod output meets SAE J583 standards
- uService is not a feature of the S2 SAE lights; opening the housing voids the manufacturer warranty
- Limited Lifetime Warranty and 30-day satisfaction guarantee, valid only if returned to the manufacturer for repair
- California Proposition 65 warning for Cancer and Reproductive Harm
Installation is designed to mount into the OEM front bumper fog light pocket openings and uses the included vehicle-specific harness adapters for plug-and-play wiring. No additional wiring parts are required. The kit is meant to bolt into the factory fog pocket openings and is supplied with the brackets and hardware needed for installation.
The kit arrives as a complete lighting package with the pods, brackets, adapters, rock guards, and hardware included in the box. If you are comparing trim levels, note that the fitment is specific to the Ford Bronco Raptor and Ford F-150 Raptor applications listed above.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2026 | Ford | Bronco | Raptor |
| 2021-2026 | Ford | F-150 | Raptor |
$649.95
Baja Designs S2 SAE/S2 Sport Fog Pocket Light Kit 448181 is a direct-fit auxiliary LED fog light replacement for the factory bumper fog light pockets. It combines two SAE-compliant amber fog pods with two clear S2 Sport driving-combo pods, giving you a matched plug-and-play setup that mounts in the OEM locations without additional trim modification.
This kit is built around rectangular aluminum light pods with a black housing finish. The S2 SAE pods use aspheric projector optics and meet SAE J583 fog lamp requirements for road-legal use. The S2 Sport pods provide a clear driving combo pattern for added forward light output. All installation hardware, vehicle-specific mounting brackets, wiring harness adapters, and a wiring harness with relay are included.
Fitment is specific to the following vehicles:
- 2023-2026 Ford Bronco Raptor
- 2021-2026 Ford F-150 Raptor
In the box you get two S2 SAE pods with Baja Amber fog pattern, two S2 Sport pods with clear driving combo pattern, four wiring harness adapters, four black rock guards with the Baja Designs logo, vehicle-specific mounting brackets, all necessary mounting hardware, and the wiring harness with relay. The kit is designed to install into the existing factory bumper fog pockets and does not require additional trim changes or extra parts.
- Manufacturer part number: 448181
- Light source: LED
- Pod form factor: rectangular
- Pod dimensions: 1.8 in x 2.9 in
- Housing material: aluminum
- Housing finish: black
- S2 SAE output: 1,210 lumens per light
- S2 SAE peak beam intensity: 5,712 candela
- S2 SAE power draw: 12.42 W per light
- S2 Sport output: 1,581 raw lumens per light
- S2 Sport power draw: 12 W per light
- Satisfaction guarantee: 30-day money-back guarantee
- Warranty: limited lifetime warranty
- uService replaceable lens functionality is not available on SAE series products
- Opening or tampering with SAE light pod housings voids the limited lifetime warranty
For the Bronco Raptor and F-150 Raptor, this kit is a clean factory-pocket solution when you want the amber SAE fog beam and the clear driving beam in one package. The included adapters and relay help keep the install straightforward, and the black rock guards protect the lenses when the lights are not in use.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2026 | Ford | Bronco | Raptor |
| 2021-2026 | Ford | F-150 | Raptor |
- Choosing a selection results in a full page refresh.
- Opens in a new window.