Welcome to RaptorsOnly.com
-
Brands
Shop by brand
- 3D MAXpider
- Access
- Addictive Desert Designs
- Advan
- AEM Induction
- aFe
- Air Lift
- Airaid
- Alcon
- AlphaRex
- AMP Research
- AMS
- Anderson Composites
- ANZO
- ARB
- Atturo Tire
- AutoMeter
- AVS
- AWE Tuning
- BackRack
- Baer Brakes
- Baja Designs
- BAK
- Banks Power
- BBK
- BBS
- BD Diesel
- Belltech
- Bestop
- BFGoodrich
- BMC
- Body Armor 4x4
- Borla
- Brembo
- Brembo OE
- Bully Dog
- Bushwacker
- Camburg
- Clevite
- COBB
- Cometic Gasket
- COMP Cams
- CORSA Performance
- Covercraft
- CSF
- DBA
- DeatschWerks
- DFC
- Diode Dynamics
- DS18
- DV8 Offroad
- Eaton
- EBC
- Eibach
- Enkei
- Extang
- Fabtech
- Fel-Pro
- fifteen52
- Firestone
- Flowmaster
- Ford Racing
- Forgestar
- FORM Lighting
- FOX
- Garrett
- Gates
- GEN-Y Hitch
- Go Fast Bits
- Go Rhino
- Gram Lights
- Granatelli Motor Sports
- GSC Power Division
- Hawk Performance
- Hella
- Hellwig
- Hotchkis
- Husky Liners
- ICON
- Injen
- J&L
- JBA
- JLT
- K&N Engineering
- KC HiLiTES
- King Engine Bearings
- King Shocks
- Kleinn Air Horns
- Kooks Headers
- KYB
- LIQUI MOLY
- LUND
- Magnaflow
- Mahle OE
- Maxtrac
- Mayhem
- MBRP
- McGard
- Method Wheels
- MGP
- Michelin
- Mickey Thompson
- Mishimoto
- Moog
- Motul
- MTX Wheels
- N-Fab
- Nacho Offroad Technology
- NGK
- Nitrous Express
- Odyssey Battery
- ORACLE Lighting
- PowerStop
- Putco
- QA1
- Raceline
- Radium Engineering
- Rally Armor
- Rampage
- Raxiom
- Retrax
- Rhino-Rack
- Ridetech
- Rigid Industries
- Rival 4x4
- RockJock
- Roll-N-Lock
- Roush
- Royal Purple
- SCT Performance
- Skyjacker
- Snow Performance
- SPC Performance
- SPOD
- Stainless Works
- Superlift
- Superpro
- Timbren
- Torque Solution
- TOYO
- Truxedo
- Tuff Country
- Turbosmart
- UMI Performance
- Undercover
- Volant
- Vossen
- Wagner Tuning
- WeatherTech
- Weld
- Westin
- Whiteline
- Wilwood
- Yokohama Tire
- Yukon Gear & Axle
- Zone Offroad
No brands found. Try another name or initial.
156 brands
View all brands -
F-150 Raptor
- F-150 Raptor
-
1st Gen (2010-2014)
-
2nd Gen (2017-2020)
-
3rd Gen (2021-Present)
-
Raptor R (2023-Present)
-
Bronco Raptor
- Bronco Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
-
Ranger Raptor
- Ranger Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
Your cart
You'll love this too
Discount invalid. Please make sure the discount details are correct.
Discount code is already applied.
Discount applied!
Subheading
Product comparison
Describe you product comparison grid
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
Find wheels and tires that fit your Raptor
Pick your truck and we'll narrow the catalogue to the wheels drilled for your bolt pattern and the tire sizes that fit your rims.
Shopping for
- Bolt pattern
- Hub bore
- Factory tire
365 products
365 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$449.00
The Method MR305 NV is an 18x9 six-lug wheel in titanium with a matte black lip, drilled 6x5.5 (6x139.7) with a -12 mm offset and 4.5 in backspacing. Method publishes it as part number MR30589060812N and describes the 305 NV as a 12-window design with the Method logo debossed on either side of the center cap.
Beadlock-style lip. The lip undercut simulates a true beadlock wheel, and the lip bolts are replaceable, with optional bolt colors available from Method.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 108 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Load rating. Method states a load rating of 2,500 to 3,640 lbs for the 305 NV line, with heavy-duty 4,500 lb applications also available; that figure is for the line, not specifically for this wheel.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 18x9, bolt pattern 6x5.5 (6x139.7)
- Offset -12 mm, backspacing 4.5 in
- Center bore 108 mm (hub rings needed for the 93.1 mm Ranger Raptor hub)
- Finish: titanium with matte black lip
- 12-window design, debossed Method logo beside the center cap
- Lip undercut with replaceable lip bolts
Fitment: Method publishes this wheel as 18x9, 6x5.5, -12mm offset, 4.5in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 108 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$429.00
The Method MR305 NV is an 18x9 six-lug wheel in matte black, drilled 6x5.5 (6x139.7) with a +18 mm offset and 5.75 in backspacing. Method publishes it as part number MR30589060518.
Twelve-window design. Method describes the 305 NV as having an iconic 12 window design with a debossed Method logo on either side of the center cap. The lip undercut is shaped to look like a true beadlock, and the lip bolts can be replaced, with other bolt colors offered.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 108 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Load rating. Method's page for the 305 NV line states a load rating of 2,500 to 3,640 lbs, with heavy duty 4,500 lbs applications available.
Wheel only. Method does not list lug nuts with this wheel; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 18x9, bolt pattern 6x5.5 (6x139.7)
- Offset +18 mm, backspacing 5.75 in
- Center bore 108 mm
- Finish: matte black
- Beadlock-style lip with replaceable bolts
- Debossed Method logo on either side of the center cap
Fitment: Method publishes this wheel as 18x9, 6x5.5, +18mm offset, 5.75in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 108 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Factory offset on the Ranger Raptor is about +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$429.00
The Method MR305 NV is an 18x9 six-lug wheel in matte black, drilled 6x5.5 (6x139.7) with a -12 mm offset and 4.5 in backspacing. Method publishes it as part number MR30589060512N and describes the 305 NV as a 12-window design with the Method logo debossed on either side of the center cap.
Beadlock-style lip. The lip undercut simulates a true beadlock wheel, and the lip bolts are replaceable, with optional bolt colors available from Method.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 108 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Load rating. Method states a load rating of 2,500 to 3,640 lbs for the 305 NV line, with heavy-duty 4,500 lb applications also available; that figure is for the line, not specifically for this wheel.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 18x9, bolt pattern 6x5.5 (6x139.7)
- Offset -12 mm, backspacing 4.5 in
- Center bore 108 mm (hub rings needed for the 93.1 mm Ranger Raptor hub)
- Finish: matte black
- 12-window design, debossed Method logo beside the center cap
- Lip undercut with replaceable lip bolts
Fitment: Method publishes this wheel as 18x9, 6x5.5, -12mm offset, 4.5in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 108 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$429.00
The Method MR305 NV is an 18x9 six-lug wheel in matte black, drilled 6x5.5 (6x139.7) with a 0 mm offset and 5 in backspacing. Method publishes it as part number MR30589060500.
Twelve-window design. Method describes the 305 NV as having an iconic 12 window design with a debossed Method logo on either side of the center cap. The lip undercut is shaped to look like a true beadlock, and the lip bolts can be replaced, with other bolt colors offered.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 108 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Load rating. Method's page for the 305 NV line states a load rating of 2,500 to 3,640 lbs, with heavy duty 4,500 lbs applications available.
Wheel only. Method does not list lug nuts with this wheel; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 18x9, bolt pattern 6x5.5 (6x139.7)
- Offset 0 mm, backspacing 5 in
- Center bore 108 mm
- Finish: matte black
- Beadlock-style lip with replaceable bolts
- Debossed Method logo on either side of the center cap
Fitment: Method publishes this wheel as 18x9, 6x5.5, 0mm offset, 5in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 108 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Factory offset on the Ranger Raptor is about +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$449.00
The Method MR305 NV is an 18x9 six-lug wheel in a machined finish with a matte black lip, drilled 6x5.5 (6x139.7) with a -12 mm offset and 4.5 in backspacing. Method publishes it as part number MR30589060312N and describes the 305 NV as a 12-window design with the Method logo debossed on either side of the center cap.
Beadlock-style lip. The lip undercut simulates a true beadlock wheel, and the lip bolts are replaceable, with optional bolt colors available from Method.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 108 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Load rating. Method states a load rating of 2,500 to 3,640 lbs for the 305 NV line, with heavy-duty 4,500 lb applications also available; that figure is for the line, not specifically for this wheel.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 18x9, bolt pattern 6x5.5 (6x139.7)
- Offset -12 mm, backspacing 4.5 in
- Center bore 108 mm (hub rings needed for the 93.1 mm Ranger Raptor hub)
- Finish: machined with matte black lip
- 12-window design, debossed Method logo beside the center cap
- Lip undercut with replaceable lip bolts
Fitment: Method publishes this wheel as 18x9, 6x5.5, -12mm offset, 4.5in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 108 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$449.00
The Method MR305 NV is an 18x9 six-lug wheel in a machined finish with a matte black lip, drilled 6x5.5 (6x139.7) with a 0 mm offset and 5 in backspacing. Method publishes it as part number MR30589060300 and describes the 305 NV as a 12-window design with the Method logo debossed on either side of the center cap.
Beadlock-style lip. The lip undercut simulates a true beadlock wheel, and the lip bolts are replaceable, with optional bolt colors available from Method.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 108 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Load rating. Method states a load rating of 2,500 to 3,640 lbs for the 305 NV line, with heavy-duty 4,500 lb applications also available; that figure is for the line, not specifically for this wheel.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 18x9, bolt pattern 6x5.5 (6x139.7)
- Offset 0 mm, backspacing 5 in
- Center bore 108 mm (hub rings needed for the 93.1 mm Ranger Raptor hub)
- Finish: machined with matte black lip
- 12-window design, debossed Method logo beside the center cap
- Lip undercut with replaceable lip bolts
Fitment: Method publishes this wheel as 18x9, 6x5.5, 0mm offset, 5in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 108 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$449.00
The Method MR305 NV is an 18x9 six-lug wheel in Double Black, drilled 6x5.5 (6x139.7) with a +18 mm offset and 5.75 in backspacing. Method publishes it as part number MR305890601018 and describes the 305 NV as a 12-window design with the Method logo debossed on either side of the center cap.
Double Black finish. Method calls Double Black a special-edition finish: a matte black wheel with a gloss black ring, black lip bolts and a flush push-through center cap.
Beadlock-style lip. The lip undercut simulates a true beadlock wheel, and the lip bolts are replaceable, with optional bolt colors available from Method.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 108 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Load rating. Method states a load rating of 2,500 to 3,640 lbs for the 305 NV Double Black; that figure is for the line, not specifically for this wheel.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 18x9, bolt pattern 6x5.5 (6x139.7)
- Offset +18 mm, backspacing 5.75 in
- Center bore 108 mm (hub rings needed for the 93.1 mm Ranger Raptor hub)
- Finish: Double Black (matte black wheel, gloss black ring, black lip bolts)
- 12-window design, debossed Method logo beside the flush push-through center cap
- Lip undercut with replaceable lip bolts
Fitment: Method publishes this wheel as 18x9, 6x5.5, +18mm offset, 5.75in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 108 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$449.00
The Method MR305 NV is an 18x9 six-lug wheel in Double Black, drilled 6x5.5 (6x139.7) with a -12 mm offset and 4.5 in backspacing. Method publishes it as part number MR305890601012N and describes the 305 NV as a 12-window design with the Method logo debossed on either side of the center cap.
Double Black finish. Method calls Double Black a special-edition finish: a matte black wheel with a gloss black ring, black lip bolts and a flush push-through center cap.
Beadlock-style lip. The lip undercut simulates a true beadlock wheel, and the lip bolts are replaceable, with optional bolt colors available from Method.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 108 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Load rating. Method states a load rating of 2,500 to 3,640 lbs for the 305 NV Double Black; that figure is for the line, not specifically for this wheel.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 18x9, bolt pattern 6x5.5 (6x139.7)
- Offset -12 mm, backspacing 4.5 in
- Center bore 108 mm (hub rings needed for the 93.1 mm Ranger Raptor hub)
- Finish: Double Black (matte black wheel, gloss black ring, black lip bolts)
- 12-window design, debossed Method logo beside the flush push-through center cap
- Lip undercut with replaceable lip bolts
Fitment: Method publishes this wheel as 18x9, 6x5.5, -12mm offset, 4.5in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 108 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$449.00
The Method MR305 NV is an 18x9 six-lug wheel in titanium with a matte black lip, drilled 6x135 with a +18 mm offset and 5.75 in backspacing. Method publishes it as part number MR30589016818 and describes the 305 NV as a 12-window design with the Method logo debossed on either side of the center cap.
Beadlock-style lip. The lip undercut simulates a true beadlock wheel, and the lip bolts are replaceable, with optional bolt colors available from Method.
Hub-centric 6x135 fit. The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 94 mm, larger than Ford's 87.1 mm hub, so hub-centric rings (94 mm to 87.1 mm) are needed to center it on the truck.
Load rating. Method states a load rating of 2,500 to 3,640 lbs for the 305 NV line, with heavy-duty 4,500 lb applications also available; that figure is for the line, not specifically for this wheel.
Wheel only. Lug nuts are not included, so plan on the correct M14x1.5 nuts for these trucks.
Features
- Size 18x9, bolt pattern 6x135
- Offset +18 mm, backspacing 5.75 in
- Center bore 94 mm (hub rings needed for Ford's 87.1 mm hub)
- Finish: titanium with matte black lip
- 12-window design, debossed Method logo beside the center cap
- Lip undercut with replaceable lip bolts
Fitment: Method publishes this wheel as 18x9, 6x135, +18mm offset, 5.75in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore (or larger). Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; the center bore for this part number is 94 mm.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$429.00
The Method MR305 NV is an 18x9 six-lug wheel in matte black, drilled 6x135 with a +18 mm offset and 5.75 in backspacing. Method publishes it as part number MR30589016518 and describes the 305 NV as a 12-window design with the Method logo debossed on either side of the center cap.
Beadlock-style lip. The lip undercut simulates a true beadlock wheel, and the lip bolts are replaceable, with optional bolt colors available from Method.
Hub-centric 6x135 fit. The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 94 mm, larger than Ford's 87.1 mm hub, so hub-centric rings (94 mm to 87.1 mm) are needed to center it on the truck.
Load rating. Method states a load rating of 2,500 to 3,640 lbs for the 305 NV line, with heavy-duty 4,500 lb applications also available; that figure is for the line, not specifically for this wheel.
Wheel only. Lug nuts are not included, so plan on the correct M14x1.5 nuts for these trucks.
Features
- Size 18x9, bolt pattern 6x135
- Offset +18 mm, backspacing 5.75 in
- Center bore 94 mm (hub rings needed for Ford's 87.1 mm hub)
- Finish: matte black
- 12-window design, debossed Method logo beside the center cap
- Lip undercut with replaceable lip bolts
Fitment: Method publishes this wheel as 18x9, 6x135, +18mm offset, 5.75in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore (or larger). Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; the center bore for this part number is 94 mm.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$429.00
The Method MR305 NV is an 18x9 six-lug wheel in matte black, drilled 6x135 with a 0 mm offset and 5 in backspacing. Method publishes it as part number MR30589016500 and describes the 305 NV as a 12-window design with the Method logo debossed on either side of the center cap.
Beadlock-style lip. The lip undercut simulates a true beadlock wheel, and the lip bolts are replaceable, with optional bolt colors available from Method.
Hub-centric 6x135 fit. The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 94 mm, larger than Ford's 87.1 mm hub, so hub-centric rings (94 mm to 87.1 mm) are needed to center it on the truck.
Load rating. Method states a load rating of 2,500 to 3,640 lbs for the 305 NV line, with heavy-duty 4,500 lb applications also available; that figure is for the line, not specifically for this wheel.
Wheel only. Lug nuts are not included, so plan on the correct M14x1.5 nuts for these trucks.
Features
- Size 18x9, bolt pattern 6x135
- Offset 0 mm, backspacing 5 in
- Center bore 94 mm (hub rings needed for Ford's 87.1 mm hub)
- Finish: matte black
- 12-window design, debossed Method logo beside the center cap
- Lip undercut with replaceable lip bolts
Fitment: Method publishes this wheel as 18x9, 6x135, 0mm offset, 5in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore (or larger). Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; the center bore for this part number is 94 mm.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$419.00
The Method MR305 NV is a 17x8.5 six-lug wheel in Method Bronze with a matte black lip, drilled 6x5.5 (6x139.7) with a 25 mm offset and 5.7 in backspacing. Method publishes it as part number MR30578560925 and describes the 305 NV as a 12-window design with the Method logo debossed on either side of the center cap.
Beadlock-style lip. The lip undercut simulates a true beadlock wheel, and the lip bolts are replaceable, with optional bolt colors available from Method.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 108 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Load rating. Method states a load rating of 2,500 to 3,640 lbs for the 305 NV line, with heavy-duty 4,500 lb applications also available; that figure is for the line, not specifically for this wheel.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x5.5 (6x139.7)
- Offset 25 mm, backspacing 5.7 in
- Center bore 108 mm (hub rings needed for the 93.1 mm Ranger Raptor hub)
- Finish: Method Bronze with matte black lip
- 12-window design, debossed Method logo beside the center cap
- Lip undercut with replaceable lip bolts
Fitment: Method publishes this wheel as 17x8.5, 6x5.5, 25mm offset, 5.7in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 108 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$419.00
The Method MR305 NV is a 17x8.5 six-lug wheel drilled 6x5.5 (6x139.7) with a 0mm offset and 4.75 in backspacing. This version has a Method Bronze face with a matte black lip. Method publishes it as part number MR30578560900.
Method's NV look. The MR305 NV has a 12-window design with a debossed Method logo on either side of the center cap. Its lip undercut simulates a true beadlock wheel, and the lip bolts are replaceable, with other colors available from Method.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 108 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to 93.1 mm to center on the truck.
Load rating. Method's page for the 305 NV states a load rating of 2,500-3,640 lbs for the line; it does not give a separate rating for this part number.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x5.5 (6x139.7)
- Offset 0mm, backspacing 4.75 in
- Center bore 108 mm
- Method Bronze finish with matte black lip
- 12-window design with a debossed Method logo on either side of the center cap
- Replaceable lip bolts with optional colors available from Method
Fitment: Method publishes this wheel as 17x8.5, 6x5.5, 0mm offset, 4.75in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 108 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$419.00
The Method MR305 NV is a 17x8.5 six-lug wheel drilled 6x5.5 (6x139.7) with a 0mm offset and 4.75 in backspacing. This version has a titanium face with a matte black lip. Method publishes it as part number MR30578560800.
Method's NV look. The MR305 NV has a 12-window design with a debossed Method logo on either side of the center cap. Its lip undercut simulates a true beadlock wheel, and the lip bolts are replaceable, with other colors available from Method.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 108 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to 93.1 mm to center on the truck.
Load rating. Method's page for the 305 NV states a load rating of 2,500-3,640 lbs for the line; it does not give a separate rating for this part number.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x5.5 (6x139.7)
- Offset 0mm, backspacing 4.75 in
- Center bore 108 mm
- Titanium finish with matte black lip
- 12-window design with a debossed Method logo on either side of the center cap
- Replaceable lip bolts with optional colors available from Method
Fitment: Method publishes this wheel as 17x8.5, 6x5.5, 0mm offset, 4.75in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 108 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$399.00
The Method MR305 NV is a 17x8.5 six-lug wheel drilled 6x5.5 (6x139.7) with a +25mm offset and 5.7 in backspacing. This version is finished in matte black. Method publishes it as part number MR30578560525.
Method's NV look. The MR305 NV has a 12-window design with a debossed Method logo on either side of the center cap. Its lip undercut simulates a true beadlock wheel, and the lip bolts are replaceable, with other colors available from Method.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 108 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to 93.1 mm to center on the truck.
Load rating. Method's page for the 305 NV states a load rating of 2,500-3,640 lbs for the line; it does not give a separate rating for this part number.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x5.5 (6x139.7)
- Offset +25mm, backspacing 5.7 in
- Center bore 108 mm
- Matte black finish
- 12-window design with a debossed Method logo on either side of the center cap
- Replaceable lip bolts with optional colors available from Method
Fitment: Method publishes this wheel as 17x8.5, 6x5.5, +25mm offset, 5.7in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 108 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$399.00
The Method MR305 NV is a 17x8.5 six-lug wheel drilled 6x5.5 (6x139.7) with a 0mm offset and 4.75 in backspacing. This version is finished in matte black. Method publishes it as part number MR30578560500.
Method's NV look. The MR305 NV has a 12-window design with a debossed Method logo on either side of the center cap. Its lip undercut simulates a true beadlock wheel, and the lip bolts are replaceable, with other colors available from Method.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 108 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to 93.1 mm to center on the truck.
Load rating. Method's page for the 305 NV states a load rating of 2,500-3,640 lbs for the line; it does not give a separate rating for this part number.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x5.5 (6x139.7)
- Offset 0mm, backspacing 4.75 in
- Center bore 108 mm
- Matte black finish
- 12-window design with a debossed Method logo on either side of the center cap
- Replaceable lip bolts with optional colors available from Method
Fitment: Method publishes this wheel as 17x8.5, 6x5.5, 0mm offset, 4.75in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 108 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$419.00
The Method MR305 NV is a 17x8.5 six-lug wheel drilled 6x5.5 (6x139.7) with a +25mm offset and 5.7 in backspacing. This version has a machined face with a matte black lip. Method publishes it as part number MR30578560325.
Method's NV look. The MR305 NV has a 12-window design with a debossed Method logo on either side of the center cap. Its lip undercut simulates a true beadlock wheel, and the lip bolts are replaceable, with other colors available from Method.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 108 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to 93.1 mm to center on the truck.
Load rating. Method's page for the 305 NV states a load rating of 2,500-3,640 lbs for the line; it does not give a separate rating for this part number.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x5.5 (6x139.7)
- Offset +25mm, backspacing 5.7 in
- Center bore 108 mm
- Machined face with matte black lip
- 12-window design with a debossed Method logo on either side of the center cap
- Replaceable lip bolts with optional colors available from Method
Fitment: Method publishes this wheel as 17x8.5, 6x5.5, +25mm offset, 5.7in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 108 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$419.00
The Method MR305 NV is a 17x8.5 six-lug wheel drilled 6x5.5 (6x139.7) with a 0mm offset and 4.75 in backspacing. This version has a machined face with a matte black lip. Method publishes it as part number MR30578560300.
Method's NV look. The MR305 NV has a 12-window design with a debossed Method logo on either side of the center cap. Its lip undercut simulates a true beadlock wheel, and the lip bolts are replaceable, with other colors available from Method.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 108 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to 93.1 mm to center on the truck.
Load rating. Method's page for the 305 NV states a load rating of 2,500-3,640 lbs for the line; it does not give a separate rating for this part number.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x5.5 (6x139.7)
- Offset 0mm, backspacing 4.75 in
- Center bore 108 mm
- Machined face with matte black lip
- 12-window design with a debossed Method logo on either side of the center cap
- Replaceable lip bolts with optional colors available from Method
Fitment: Method publishes this wheel as 17x8.5, 6x5.5, 0mm offset, 4.75in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 108 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$419.00
The Method MR305 NV is a 17x8.5 six-lug wheel drilled 6x5.5 (6x139.7) with a +25mm offset and 5.7 in backspacing. Double Black is a special-edition finish: a matte black wheel with a gloss black ring, black lip bolts and a flush push-through center cap. Method publishes it as part number MR305785601025.
Method's NV look. The MR305 NV has a 12-window design with a debossed Method logo on either side of the center cap. Its lip undercut simulates a true beadlock wheel, and the lip bolts are replaceable, with other colors available from Method.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 108 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to 93.1 mm to center on the truck.
Load rating. Method's page for the 305 NV states a load rating of 2,500-3,640 lbs for the line; it does not give a separate rating for this part number.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x5.5 (6x139.7)
- Offset +25mm, backspacing 5.7 in
- Center bore 108 mm
- Double Black finish: matte black wheel, gloss black ring, black lip bolts
- Flush push-through center cap
- 12-window design with a debossed Method logo on either side of the center cap
- Replaceable lip bolts with optional colors available from Method
Fitment: Method publishes this wheel as 17x8.5, 6x5.5, +25mm offset, 5.7in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 108 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$419.00
The Method MR305 NV is a 17x8.5 six-lug wheel drilled 6x5.5 (6x139.7) with a 0mm offset and 4.75 in backspacing. Double Black is a special-edition finish: a matte black wheel with a gloss black ring, black lip bolts and a flush push-through center cap. Method publishes it as part number MR305785601000.
Method's NV look. The MR305 NV has a 12-window design with a debossed Method logo on either side of the center cap. Its lip undercut simulates a true beadlock wheel, and the lip bolts are replaceable, with other colors available from Method.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 108 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to 93.1 mm to center on the truck.
Load rating. Method's page for the 305 NV states a load rating of 2,500-3,640 lbs for the line; it does not give a separate rating for this part number.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x5.5 (6x139.7)
- Offset 0mm, backspacing 4.75 in
- Center bore 108 mm
- Double Black finish: matte black wheel, gloss black ring, black lip bolts
- Flush push-through center cap
- 12-window design with a debossed Method logo on either side of the center cap
- Replaceable lip bolts with optional colors available from Method
Fitment: Method publishes this wheel as 17x8.5, 6x5.5, 0mm offset, 4.75in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 108 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$419.00
The Method MR305 NV is a 17x8.5 six-lug wheel drilled 6x135 with a 0mm offset and 4.75 in backspacing. This version has a Method Bronze face with a matte black lip. Method publishes it as part number MR30578516900.
Method's NV look. The MR305 NV has a 12-window design with a debossed Method logo on either side of the center cap. Its lip undercut simulates a true beadlock wheel, and the lip bolts are replaceable, with other colors available from Method.
6x135 fit. The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 94 mm, larger than the Ford 87.1 mm hub, so it needs hub-centric rings to 87.1 mm to center on the truck.
Load rating. Method's page for the 305 NV states a load rating of 2,500-3,640 lbs for the line; it does not give a separate rating for this part number.
Wheel only. Lug nuts are not included; the F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x135
- Offset 0mm, backspacing 4.75 in
- Center bore 94 mm
- Method Bronze finish with matte black lip
- 12-window design with a debossed Method logo on either side of the center cap
- Replaceable lip bolts with optional colors available from Method
Fitment: Method publishes this wheel as 17x8.5, 6x135, 0mm offset, 4.75in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore or larger. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; the center bore for this part number is 94 mm. It is not listed for the 2010-2014 SVT Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$419.00
The Method MR305 NV is a 17x8.5 six-lug wheel drilled 6x135 with a 0mm offset and 4.75 in backspacing. This version has a titanium face with a matte black lip. Method publishes it as part number MR30578516800.
Method's NV look. The MR305 NV has a 12-window design with a debossed Method logo on either side of the center cap. Its lip undercut simulates a true beadlock wheel, and the lip bolts are replaceable, with other colors available from Method.
6x135 fit. The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 94 mm, larger than the Ford 87.1 mm hub, so it needs hub-centric rings to 87.1 mm to center on the truck.
Load rating. Method's page for the 305 NV states a load rating of 2,500-3,640 lbs for the line; it does not give a separate rating for this part number.
Wheel only. Lug nuts are not included; the F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x135
- Offset 0mm, backspacing 4.75 in
- Center bore 94 mm
- Titanium finish with matte black lip
- 12-window design with a debossed Method logo on either side of the center cap
- Replaceable lip bolts with optional colors available from Method
Fitment: Method publishes this wheel as 17x8.5, 6x135, 0mm offset, 4.75in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore or larger. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; the center bore for this part number is 94 mm. It is not listed for the 2010-2014 SVT Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$399.00
The Method MR305 NV is a 17x8.5 six-lug wheel drilled 6x135 with a 0mm offset and 4.75 in backspacing. This version is finished in matte black. Method publishes it as part number MR30578516500.
Method's NV look. The MR305 NV has a 12-window design with a debossed Method logo on either side of the center cap. Its lip undercut simulates a true beadlock wheel, and the lip bolts are replaceable, with other colors available from Method.
6x135 fit. The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 94 mm, larger than the Ford 87.1 mm hub, so it needs hub-centric rings to 87.1 mm to center on the truck.
Load rating. Method's page for the 305 NV states a load rating of 2,500-3,640 lbs for the line; it does not give a separate rating for this part number.
Wheel only. Lug nuts are not included; the F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x135
- Offset 0mm, backspacing 4.75 in
- Center bore 94 mm
- Matte black finish
- 12-window design with a debossed Method logo on either side of the center cap
- Replaceable lip bolts with optional colors available from Method
Fitment: Method publishes this wheel as 17x8.5, 6x135, 0mm offset, 4.75in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore or larger. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; the center bore for this part number is 94 mm. It is not listed for the 2010-2014 SVT Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$419.00
The Method MR305 NV is a 17x8.5 six-lug wheel drilled 6x135 with a 0mm offset and 4.75 in backspacing. This version has a machined face with a matte black lip. Method publishes it as part number MR30578516300.
Method's NV look. The MR305 NV has a 12-window design with a debossed Method logo on either side of the center cap. Its lip undercut simulates a true beadlock wheel, and the lip bolts are replaceable, with other colors available from Method.
6x135 fit. The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 94 mm, larger than the Ford 87.1 mm hub, so it needs hub-centric rings to 87.1 mm to center on the truck.
Load rating. Method's page for the 305 NV states a load rating of 2,500-3,640 lbs for the line; it does not give a separate rating for this part number.
Wheel only. Lug nuts are not included; the F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x135
- Offset 0mm, backspacing 4.75 in
- Center bore 94 mm
- Machined face with matte black lip
- 12-window design with a debossed Method logo on either side of the center cap
- Replaceable lip bolts with optional colors available from Method
Fitment: Method publishes this wheel as 17x8.5, 6x135, 0mm offset, 4.75in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore or larger. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; the center bore for this part number is 94 mm. It is not listed for the 2010-2014 SVT Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$419.00
The Method MR305 NV is a 17x8.5 six-lug wheel drilled 6x135 with a 0mm offset and 4.75 in backspacing. Double Black is a special-edition finish: a matte black wheel with a gloss black ring, black lip bolts and a flush push-through center cap. Method publishes it as part number MR305785161000.
Method's NV look. The MR305 NV has a 12-window design with a debossed Method logo on either side of the center cap. Its lip undercut simulates a true beadlock wheel, and the lip bolts are replaceable, with other colors available from Method.
6x135 fit. The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 94 mm, larger than the Ford 87.1 mm hub, so it needs hub-centric rings to 87.1 mm to center on the truck.
Load rating. Method's page for the 305 NV states a load rating of 2,500-3,640 lbs for the line; it does not give a separate rating for this part number.
Wheel only. Lug nuts are not included; the F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x135
- Offset 0mm, backspacing 4.75 in
- Center bore 94 mm
- Double Black finish: matte black wheel, gloss black ring, black lip bolts
- Flush push-through center cap
- 12-window design with a debossed Method logo on either side of the center cap
- Replaceable lip bolts with optional colors available from Method
Fitment: Method publishes this wheel as 17x8.5, 6x135, 0mm offset, 4.75in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore or larger. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; the center bore for this part number is 94 mm. It is not listed for the 2010-2014 SVT Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$399.00
The Method MR305 NV in Method Bronze with a black Street Loc ring is a 16x8 six-lug wheel, drilled 6x5.5 (6x139.7) with a 0 mm offset and 4.5 in backspacing. Method publishes it as part number MR30568060900.
Twelve-window design. Method describes the 305 NV as having an iconic 12 window design with a debossed Method logo on either side of the center cap. The lip undercut is shaped to look like a true beadlock, and the lip bolts can be replaced, with other bolt colors offered.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 108 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Load rating. Method's page for the 305 NV line states a load rating of 2,500 to 3,640 lbs, with heavy duty 4,500 lbs applications available.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 16x8, bolt pattern 6x5.5 (6x139.7)
- Offset 0 mm, backspacing 4.5 in
- Center bore 108 mm
- Finish: Method Bronze with a black Street Loc ring
- Beadlock-style lip with replaceable bolts
- Push-through center cap with embossed METHOD logo (per Method's feature list)
Fitment: Method publishes this wheel as 16x8, 6x5.5, 0mm offset, 4.5in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 108 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$379.00
The Method MR305 NV is a 16x8 six-lug wheel in matte black, drilled 6x5.5 (6x139.7) with a 0 mm offset and 4.5 in backspacing. Method publishes it as part number MR30568060500.
Twelve-window design. Method describes the 305 NV as having an iconic 12 window design with a debossed Method logo on either side of the center cap. The lip undercut is shaped to look like a true beadlock, and the lip bolts can be replaced, with other bolt colors offered.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 108 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Load rating. Method's page for the 305 NV line states a load rating of 2,500 to 3,640 lbs, with heavy duty 4,500 lbs applications available.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 16x8, bolt pattern 6x5.5 (6x139.7)
- Offset 0 mm, backspacing 4.5 in
- Center bore 108 mm
- Finish: matte black
- Beadlock-style lip with replaceable bolts
- Push-through center cap with embossed METHOD logo (per Method's feature list)
Fitment: Method publishes this wheel as 16x8, 6x5.5, 0mm offset, 4.5in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 108 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$399.00
The Method MR305 NV in a machined face with a black Street Loc ring is a 16x8 six-lug wheel, drilled 6x5.5 (6x139.7) with a 0 mm offset and 4.5 in backspacing. Method publishes it as part number MR30568060300.
Twelve-window design. Method describes the 305 NV as having an iconic 12 window design with a debossed Method logo on either side of the center cap. The lip undercut is shaped to look like a true beadlock, and the lip bolts can be replaced, with other bolt colors offered.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 108 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Load rating. Method's page for the 305 NV line states a load rating of 2,500 to 3,640 lbs, with heavy duty 4,500 lbs applications available.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 16x8, bolt pattern 6x5.5 (6x139.7)
- Offset 0 mm, backspacing 4.5 in
- Center bore 108 mm
- Finish: machined face with black Street Loc ring
- Beadlock-style lip with replaceable bolts
- Push-through center cap with embossed METHOD logo (per Method's feature list)
Fitment: Method publishes this wheel as 16x8, 6x5.5, 0mm offset, 4.5in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 108 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$399.00
The Method MR305 NV in Double Black is a 16x8 six-lug wheel, drilled 6x5.5 (6x139.7) with a 0 mm offset and 4.5 in backspacing. Method publishes it as part number MR305680601000.
Double Black finish. Method describes the special edition Double Black finish as a matte black wheel with a gloss black ring, black lip bolts and a flush push-through center cap. The 305 NV has a 12 window design with a debossed Method logo on either side of the center cap, and a lip undercut that simulates a true beadlock with replaceable lip bolts.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 108 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Load rating. Method's page for this finish states a load rating of 2,500 to 3,640 lbs.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 16x8, bolt pattern 6x5.5 (6x139.7)
- Offset 0 mm, backspacing 4.5 in
- Center bore 108 mm
- Finish: Double Black (matte black wheel, gloss black ring, black lip bolts)
- Beadlock-style lip with replaceable bolts
Fitment: Method publishes this wheel as 16x8, 6x5.5, 0mm offset, 4.5in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 108 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$479.00
The Method MR305 NV is a 20x9 six-lug wheel in matte black, drilled 6x5.5 (6x139.7) with a +18 mm offset and 5.75 in backspacing. Method publishes it as part number MR30529060518.
Twelve-window design. Method describes the 305 NV as having an iconic 12 window design with a debossed Method logo on either side of the center cap. The lip undercut is shaped to look like a true beadlock, and the lip bolts can be replaced, with other bolt colors offered.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 108 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Load rating. Method's page for the 305 NV line states a load rating of 2,500 to 3,640 lbs, with heavy duty 4,500 lbs applications available.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 20x9, bolt pattern 6x5.5 (6x139.7)
- Offset +18 mm, backspacing 5.75 in
- Center bore 108 mm
- Finish: matte black
- Beadlock-style lip with replaceable bolts
- Push-through center cap with embossed METHOD logo (per Method's feature list)
Fitment: Method publishes this wheel as 20x9, 6x5.5, +18mm offset, 5.75in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 108 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$399.00
The Method MR304 Double Standard is a 17x8.5 six-lug wheel in matte black, drilled 6x5.5 (6x139.7) with a 0 mm offset and 4.75 in backspacing. Method publishes it as part number MR30478560500.
Twelve-spoke design. Method describes the 304 as its 12 spoke design with a debossed Method logo. The lip undercut is shaped to look like a true beadlock, and the lip bolts can be replaced, with other bolt colors offered.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 108 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Load rating. Method's page for the 304 line states a load rating of 2,100 to 3,600 lbs.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x5.5 (6x139.7)
- Offset 0 mm, backspacing 4.75 in
- Center bore 108 mm
- Finish: matte black
- Beadlock-style lip with replaceable bolts
- Push-through center cap with embossed METHOD logo (per Method's feature list)
Fitment: Method publishes this wheel as 17x8.5, 6x5.5, 0mm offset, 4.75in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 108 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$419.00
The Method MR304 Double Standard is a 17x8.5 six-lug wheel with a machined face and clear coat, drilled 6x5.5 (6x139.7) with a 0 mm offset and 4.75 in backspacing. Method publishes it as part number MR30478560300.
Twelve-spoke design. Method describes the 304 as its 12 spoke design with a debossed Method logo. The lip undercut is shaped to look like a true beadlock, and the lip bolts can be replaced, with other bolt colors offered.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 108 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Load rating. Method's page for the 304 line states a load rating of 2,100 to 3,600 lbs.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x5.5 (6x139.7)
- Offset 0 mm, backspacing 4.75 in
- Center bore 108 mm
- Finish: machined with clear coat
- Beadlock-style lip with replaceable bolts
- Push-through center cap with embossed METHOD logo (per Method's feature list)
Fitment: Method publishes this wheel as 17x8.5, 6x5.5, 0mm offset, 4.75in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 108 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$419.00
The Method MR304 Double Standard is a 17x8.5 six-lug wheel with a machined face and clear coat, drilled 6x135 with a 0 mm offset and 4.75 in backspacing. Method publishes it as part number MR30478516300.
Twelve-spoke design. Method describes the 304 as its 12 spoke design with a debossed Method logo. The lip undercut is shaped to look like a true beadlock, and the lip bolts can be replaced, with other bolt colors offered.
6x135 fit with a larger bore. The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. This wheel's bore is listed as 94 mm, larger than Ford's 87.1 mm hub, so it needs hub-centric rings to center on the truck.
Load rating. Method's page for the 304 line states a load rating of 2,100 to 3,600 lbs.
Wheel only. Lug nuts are not included; these trucks use M14x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x135
- Offset 0 mm, backspacing 4.75 in
- Center bore 94 mm
- Finish: machined with clear coat
- Beadlock-style lip with replaceable bolts
- Push-through center cap with embossed METHOD logo (per Method's feature list)
Fitment: Method publishes this wheel as 17x8.5, 6x135, 0mm offset, 4.75in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore or larger. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; the center bore for this part number is 94 mm.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$379.00
The Method MR304 Double Standard is a 16x8 six-lug wheel in matte black, drilled 6x5.5 (6x139.7) with a 0 mm offset and 4.5 in backspacing. Method publishes it as part number MR30468060500.
Twelve-spoke design. Method describes the 304 as its 12 spoke design with a debossed Method logo. The lip undercut is shaped to look like a true beadlock, and the lip bolts can be replaced, with other bolt colors offered.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 108 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Load rating. Method's page for the 304 line states a load rating of 2,100 to 3,600 lbs.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 16x8, bolt pattern 6x5.5 (6x139.7)
- Offset 0 mm, backspacing 4.5 in
- Center bore 108 mm
- Finish: matte black
- Beadlock-style lip with replaceable bolts
- Push-through center cap with embossed METHOD logo (per Method's feature list)
Fitment: Method publishes this wheel as 16x8, 6x5.5, 0mm offset, 4.5in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 108 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$399.00
The Method MR304 Double Standard is a 16x8 six-lug wheel with a machined face and clear coat, drilled 6x5.5 (6x139.7) with a 0 mm offset and 4.5 in backspacing. Method publishes it as part number MR30468060300.
Twelve-spoke design. Method describes the 304 as its 12 spoke design with a debossed Method logo. The lip undercut is shaped to look like a true beadlock, and the lip bolts can be replaced, with other bolt colors offered.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 108 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Load rating. Method's page for the 304 line states a load rating of 2,100 to 3,600 lbs.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 16x8, bolt pattern 6x5.5 (6x139.7)
- Offset 0 mm, backspacing 4.5 in
- Center bore 108 mm
- Finish: machined with clear coat
- Beadlock-style lip with replaceable bolts
- Push-through center cap with embossed METHOD logo (per Method's feature list)
Fitment: Method publishes this wheel as 16x8, 6x5.5, 0mm offset, 4.5in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 108 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$599.00
The Method MR105 Beadlock is a 17x8.5 six-lug wheel in matte black, drilled 6x5.5 (6x139.7) with a 0 mm offset and 4.75 in backspacing. Method publishes it as part number MR10578560500B and sells the MR105 as a beadlock wheel built for off-road use.
Beadlock look and hardware. A ring of lip bolts around the outer rim gives the wheel its beadlock style. Method's feature list for the MR105 states a push-through center cap with embossed METHOD logo on applications other than 5x5 and 6x135.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 108 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x5.5 (6x139.7)
- Offset 0 mm, backspacing 4.75 in
- Center bore 108 mm
- Finish: matte black
- Beadlock-style ring with lip bolts
- Push-through center cap with embossed METHOD logo (per Method's feature list)
Fitment: Method publishes this wheel as 17x8.5, 6x5.5, 0mm offset, 4.75in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 108 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$599.00
The Method MR105 Beadlock is a 17x8.5 six-lug wheel in matte black, drilled 6x135 with a 0 mm offset and 4.75 in backspacing. Method publishes it as part number MR10578516500B and sells the MR105 as a beadlock wheel built for off-road use.
Beadlock look and hardware. A ring of lip bolts around the outer rim gives the wheel its beadlock style. Method's feature list for the MR105 states a bolt-on center cap with embossed METHOD logo on 6x135 applications.
Hub-centric 6x135 fit. The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 87 mm (nominal 87.1), so it centers on the Ford hub.
Wheel only. Lug nuts are not included, so plan on the correct M14x1.5 nuts for these trucks.
Features
- Size 17x8.5, bolt pattern 6x135
- Offset 0 mm, backspacing 4.75 in
- Center bore 87 mm (nominal 87.1)
- Finish: matte black
- Beadlock-style ring with lip bolts
- Bolt-on center cap with embossed METHOD logo (per Method's feature list)
Fitment: Method publishes this wheel as 17x8.5, 6x135, 0mm offset, 4.75in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; the center bore for this part number is 87 mm.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
The Mayhem 8015 Warrior in gloss black milled is a 20x9 aluminum wheel drilled for both 6x135 and 6x139.7 lug patterns. That dual drilling lets it bolt onto Ford's 6x135 Raptors (F-150 Raptor, F-150 Raptor R and Bronco Raptor) and onto the 6x139.7 Ranger Raptor.
Specs from Mayhem. Mayhem publishes part number 8015-2937M18 as a 20x9 wheel with a +18 mm offset, 5.71 in of backspacing and a 106 mm hub bore. The wheel is rated for 2,500 lb per wheel and uses a conical lug seat.
Dual-drill bolt pattern. Mayhem lists the bolt pattern as 6-135 / 6-139.7, which means the wheel carries both sets of lug holes. Your truck uses the set that matches its hub: 6x135 for the F-150 Raptor, F-150 Raptor R and Bronco Raptor, 6x139.7 for the Ranger Raptor.
Hub-centric rings. The 106 mm center bore is larger than the hub on every one of these trucks (87.1 mm on the 6x135 Raptors, 93.1 mm on the Ranger Raptor), so the wheel mounts with hub-centric rings sized to your truck's hub.
Lug nuts and center cap. The wheel is sold without lug nuts. The F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 studs and the Ranger Raptor uses M12x1.5, so buy nuts with a conical seat in the right thread. Mayhem lists center cap C108040B01 for this wheel.
Built to carry load. Mayhem describes the line as precision-built from high-quality aluminum alloys, TPMS compatible, and backed by a lifetime structural warranty.
Features
- 20x9, +18 mm offset, 5.71 in backspacing
- Dual drilled 6x135 / 6x139.7 with a 106 mm hub bore
- 2,500 lb load rating per wheel
- Conical lug seat
- Gloss black milled finish
- TPMS compatible
- Lifetime structural warranty
Fitment: Mayhem publishes this wheel as 20x9, 6-135 / 6-139.7, +18 mm offset, 5.71 in backspacing and does not name vehicles. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x135 with a bore of 87.1 mm or larger for the F-150 Raptor, F-150 Raptor R and Bronco Raptor, and 6x139.7 with a bore of 93.1 mm or larger for the Ranger Raptor. Bore per Mayhem's published spec row for this part number.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. At +18 mm it is lower than the roughly +34 mm factory offset of the F-150 Raptor, F-150 Raptor R and Bronco Raptor, and lower than the +55 mm factory offset of the Ranger Raptor.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Rebound in Double Black is a 20 x 9 truck wheel with a 6x5.5 (6x139.7) bolt pattern, a 0mm offset, 5in backspacing and a 106.1mm center bore. It pairs a concave spoke design with color-matched rock ring bolts, and it is listed here for the 2024-2026 Ford Ranger Raptor, the one Raptor that runs a 6x139.7 pattern.
Built for daily driving and the trail. ICON makes the 20 inch Rebound from a high-strength aluminum alloy and rates it at 2,750 pounds, which ICON says is enough for daily driven use, tow/haul duty and off-road trips.
Dimensions tuned for fitment. ICON sets the backspacing to improve wheel fitment, maximize caliper clearance, reduce scrub radius and leave suspension travel unhindered.
Center bore. The 106.1mm bore is larger than the Ranger Raptor's 93.1mm hub, so hub-centric rings are needed to center the wheel on the hub.
Lower offset than factory. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Studs and hardware. The Ranger Raptor uses M12x1.5 lug studs. ICON's page does not list lug nuts with this wheel, so plan to order them separately.
Features
- 20 x 9 size, 6x5.5 (6x139.7) bolt pattern, 0mm offset, 5in backspacing, 106.1mm bore
- High-strength aluminum alloy construction
- 2,750 lb load rating per ICON
- Concave spoke design with color-matched rock ring bolts
- Double Black finish; ICON also offers the Rebound in Bronze, Satin Black and Titanium
- Reduced unsprung weight and rotating mass, per the supplier listing
Fitment: ICON publishes this wheel as 20 x 9, 6 x 5.5 with a 0mm offset and 5in backspacing and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor, the only Raptor with a 6x139.7 (6x5.5) bolt pattern and a 93.1mm center bore (the wheel's bore must be equal or larger). Fitment decided by bolt pattern and center bore against Ford's Raptor hub specs. It does not fit the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use 6x135.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.