Welcome to RaptorsOnly.com
-
Brands
Shop by brand
- 3D MAXpider
- Access
- Addictive Desert Designs
- Advan
- AEM Induction
- aFe
- Air Lift
- Airaid
- Alcon
- AlphaRex
- AMP Research
- AMS
- Anderson Composites
- ANZO
- ARB
- Atturo Tire
- AutoMeter
- AVS
- AWE Tuning
- BackRack
- Baer Brakes
- Baja Designs
- BAK
- Banks Power
- BBK
- BBS
- BD Diesel
- Belltech
- Bestop
- BFGoodrich
- BMC
- Body Armor 4x4
- Borla
- Brembo
- Brembo OE
- Bully Dog
- Bushwacker
- Camburg
- Clevite
- COBB
- Cometic Gasket
- COMP Cams
- CORSA Performance
- Covercraft
- CSF
- DBA
- DeatschWerks
- DFC
- Diode Dynamics
- DS18
- DV8 Offroad
- Eaton
- EBC
- Eibach
- Enkei
- Extang
- Fabtech
- Fel-Pro
- fifteen52
- Firestone
- Flowmaster
- Ford Racing
- Forgestar
- FORM Lighting
- FOX
- Garrett
- Gates
- GEN-Y Hitch
- Go Fast Bits
- Go Rhino
- Gram Lights
- Granatelli Motor Sports
- GSC Power Division
- Hawk Performance
- Hella
- Hellwig
- Hotchkis
- Husky Liners
- ICON
- Injen
- J&L
- JBA
- JLT
- K&N Engineering
- KC HiLiTES
- King Engine Bearings
- King Shocks
- Kleinn Air Horns
- Kooks Headers
- KYB
- LIQUI MOLY
- LUND
- Magnaflow
- Mahle OE
- Maxtrac
- Mayhem
- MBRP
- McGard
- Method Wheels
- MGP
- Michelin
- Mickey Thompson
- Mishimoto
- Moog
- Motul
- MTX Wheels
- N-Fab
- Nacho Offroad Technology
- NGK
- Nitrous Express
- Odyssey Battery
- ORACLE Lighting
- PowerStop
- Putco
- QA1
- Raceline
- Radium Engineering
- Rally Armor
- Rampage
- Raxiom
- Retrax
- Rhino-Rack
- Ridetech
- Rigid Industries
- Rival 4x4
- RockJock
- Roll-N-Lock
- Roush
- Royal Purple
- SCT Performance
- Skyjacker
- Snow Performance
- SPC Performance
- SPOD
- Stainless Works
- Superlift
- Superpro
- Timbren
- Torque Solution
- TOYO
- Truxedo
- Tuff Country
- Turbosmart
- UMI Performance
- Undercover
- Volant
- Vossen
- Wagner Tuning
- WeatherTech
- Weld
- Westin
- Whiteline
- Wilwood
- Yokohama Tire
- Yukon Gear & Axle
- Zone Offroad
No brands found. Try another name or initial.
156 brands
View all brands -
F-150 Raptor
- F-150 Raptor
-
1st Gen (2010-2014)
-
2nd Gen (2017-2020)
-
3rd Gen (2021-Present)
-
Raptor R (2023-Present)
-
Bronco Raptor
- Bronco Raptor
-
Suspension
-
Lighting
-
Bumpers & Armor
-
Racks
-
Interior Accessories
-
Exterior Accessories
-
Performance
-
Wheels & Tires
-
Brakes
-
Drivetrain
-
Engine & Cooling
-
Ranger Raptor
- Ranger Raptor
-
Suspension
-
Lighting
-
Bumpers & Armor
-
Racks
-
Interior Accessories
-
Exterior Accessories
-
Performance
-
Wheels & Tires
-
Brakes
-
Drivetrain
-
Engine & Cooling
Your cart
Subheading
Product comparison
Describe you product comparison grid
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
9 products
9 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$883.98
The Injen FM9102I is a bar-and-plate front mount intercooler for the 2017-2023 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost. It also fits the 2015-2023 F-150 with the 2.7L or 3.5L EcoBoost. It replaces the factory intercooler with a larger core that cools the charge air more effectively, so the engine keeps making power in heat, when towing and during repeated hard pulls.
A larger core. Injen says the core is about 25 percent larger than stock. The TIG-welded bar-and-plate construction is built for the heat and boost pressure of a turbocharged truck.
Measured gains. Injen claims up to 29 horsepower and 33 lb-ft of torque, backed by a Dynojet chart in the photos.
Complete installation. The kit includes the hardware needed to install it. The shipping weight is about 30 pounds.
Features
- Bar-and-plate core about 25% larger than stock
- TIG-welded construction
- Up to 29 hp and 33 lb-ft claimed
- Mounting hardware included
Emissions
Injen states this product is not currently CARB exempt and is not for sale or use on California-registered vehicles or in other states that follow California rules. Prop 65 warning applies.
Fitment: 2017-2023 Ford F-150 Raptor 3.5L twin-turbo EcoBoost, plus the 2015-2023 F-150 with the 3.5L or 2.7L twin-turbo. Fitment confirmed against Injen's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2023 | Ford | F-150 | Raptor 3.5L twin turbo EcoBoost |
| 2015-2023 | Ford | F-150 | 3.5L twin turbo EcoBoost |
| 2015-2023 | Ford | F-150 | 2.7L twin turbo EcoBoost |
$401.38
The Injen Evolution EVO9106 is a cold air intake built for the 6.2L V8 in the 2010-2014 Ford F-150 SVT Raptor. Injen lists the Raptor for every model year from 2010 through 2014, so this is a direct application rather than a universal kit.
More airflow. The system replaces the restrictive stock intake with a sealed airbox, duct and tube so the V8 draws cooler air with less restriction. Injen claims up to 15 horsepower and 16 lb-ft of torque, and a Dynojet chart is included in the photos.
A dry, reusable filter. The SuperNano-Web dry filter needs no oil and can be cleaned and reused. The replacement filter is Injen X-1129-BB.
Features
- SuperNano-Web dry air filter (replacement X-1129-BB)
- Sealed airbox, duct and molded tube
- Up to 15 hp and 16 lb-ft claimed
- About 11 lb shipping weight
Emissions
Injen states this system is not currently CARB exempt and is not for sale or use on California-registered vehicles or in other states that follow California rules. Prop 65 warning applies.
Fitment: 2010-2014 Ford F-150 Raptor with the 6.2L V8. Fitment confirmed against Injen's published application list.
Guides & Manuals
Installation InstructionsDyno Chart
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor 6.2L V8 |
$375.30
The Injen Evolution EVO9104 is a cold air intake for the 2017-2025 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost, and it also fits the standard 3.5L F-150 and the 2018-2024 Expedition. It uses a dry SuperNano-Web filter and a sealed intake path, so the engine draws cooler air with less restriction than the stock setup.
Measured power gains. Injen claims up to 19 horsepower and 21 lb-ft of torque from this system, backed by a Dynojet comparison chart that is included in the photos.
Built from durable parts. The airbox and scoop are roto-molded cross-linked polyethylene, the filter sits behind a Clear-Vue window, and a Twist Lock fitting makes the connection quick to service. Injen builds the system in Pomona, California, and it keeps the stock calibration, so no tune is needed.
A low-maintenance dry filter. The SuperNano-Web filter needs no oil and can be cleaned and reused.
Features
- Dry SuperNano-Web air filter
- Roto-molded XLPE box and scoop
- Clear-Vue window and Twist Lock fitting
- Works with the stock calibration
- Up to 19 hp and 21 lb-ft claimed
- Made in the USA; does not fit hybrid models
Emissions
Injen states this system is not currently CARB exempt and is not for sale or use on California-registered vehicles or in other states that follow California rules. Prop 65 warning applies.
Fitment: 2017-2025 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost, plus the 2017-2025 F-150 3.5L and the 2018-2024 Expedition 3.5L twin-turbo. Fitment confirmed against Injen's published application list.
Guides & Manuals
Installation InstructionsDyno Chart
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2025 | Ford | F-150 | Raptor 3.5L twin turbo EcoBoost |
| 2017-2025 | Ford | F-150 | 3.5L twin turbo EcoBoost (not hybrid) |
| 2018-2024 | Ford | Expedition | 3.5L twin turbo |
$437.67
The Injen Evolution EVO9107 is a two-piece cold air intake with a boost plenum for the 2017-2025 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost. It also fits the 2015-2025 F-150 with the 2.7L or 3.5L EcoBoost and the 2018-2024 Expedition and Navigator with the 3.5L.
Cooler, freer airflow. The system replaces the factory intake with a larger airbox, duct and tube so the turbos draw in cooler air with less restriction. Injen claims up to 14 horsepower and 15 lb-ft of torque, and a Dynojet chart is included in the photos.
A dry, reusable filter. The dry filter needs no oil and can be cleaned and reused.
Easy ownership. The system works with the stock calibration, so no tune is needed. Injen builds it in the USA.
Features
- Two-piece airbox with boost plenum
- Dry washable air filter
- Works with the stock calibration
- Up to 14 hp and 15 lb-ft claimed
- About 15 lb shipping weight
Emissions
Injen states this system is not currently CARB exempt and is not for sale or use on California-registered vehicles or in other states that follow California rules. Prop 65 warning applies.
Fitment: 2017-2025 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost, plus the F-150 and Expedition/Navigator applications listed below. Fitment confirmed against Injen's published application list.
Guides & Manuals
Installation InstructionsDyno Chart
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2025 | Ford | F-150 | Raptor 3.5L twin turbo EcoBoost |
| 2015-2025 | Ford | F-150 | 2.7L and 3.5L twin turbo EcoBoost |
| 2018-2024 | Ford / Lincoln | Expedition / Navigator | 3.5L twin turbo |
$375.30
The Injen Evolution EVO9104C is the oiled-filter version of Injen's cold air intake for the 2017-2025 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost. It also fits the standard 3.5L F-150 and the 2018-2024 Expedition. An eight-layer oiled cotton gauze filter replaces the factory airbox element, so the engine draws in cooler air with less restriction.
Measured power gains. Injen claims up to 19 horsepower and 21 lb-ft of torque from this system, and a Dynojet comparison chart is included in the photos.
Built from durable parts. The airbox and scoop are roto-molded cross-linked polyethylene with a Clear-Vue window and a Twist Lock fitting. Injen builds the system in Pomona, California, and it works with the stock calibration, so no tune is needed.
Washable cotton filter. The eight-layer oiled cotton gauze filter can be cleaned and re-oiled instead of replaced.
Features
- Eight-layer oiled cotton gauze air filter
- Roto-molded XLPE box and scoop
- Clear-Vue window and Twist Lock fitting
- Works with the stock calibration
- Up to 19 hp and 21 lb-ft claimed
- Made in the USA; does not fit hybrid models
Emissions
Injen states this system is not currently CARB exempt and is not for sale or use on California-registered vehicles or in other states that follow California rules. Prop 65 warning applies.
Fitment: 2017-2025 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost, plus the 2017-2025 F-150 3.5L and the 2018-2024 Expedition 3.5L twin-turbo. Fitment confirmed against Injen's published application list.
Guides & Manuals
Installation InstructionsDyno Chart
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2025 | Ford | F-150 | Raptor 3.5L twin turbo EcoBoost |
| 2017-2025 | Ford | F-150 | 3.5L twin turbo EcoBoost (not hybrid) |
| 2018-2024 | Ford | Expedition | 3.5L twin turbo |
$568.08
The Injen PF9032RG is a cold air intake in Cement Grey for the 2017-2026 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost. It also fits the 2015-2026 F-150 3.5L twin turbo and the 2018-2026 Expedition and Navigator. Dual 3.5-inch inlets feed two dry filters, so the engine draws in cooler air with less restriction.
Airflow and torque. Injen claims up to 12 horsepower and 24 lb-ft of torque. The photos include a Dynojet comparison chart and an airflow cutaway of the intake tube.
A heat shield and two filters. The kit includes a heat shield and two X-1079-BB dry filters, which keep hot engine-bay air away from the intake. The tubes are cross-linked polyethylene (XLPE), and the kit comes with the hardware to install it.
Features
- Cement Grey finish
- Dual 3.5-inch inlets with two dry filters (X-1079-BB)
- Heat shield included
- XLPE intake tubes
- Up to 12 hp and 24 lb-ft claimed
- Does not fit hybrid models; the 2.7L is not listed
Emissions
Injen states this system is not currently CARB exempt and is not for sale or use on California-registered vehicles or in other states that follow California rules. Prop 65 warning applies.
Fitment: 2017-2026 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost, plus the F-150 and Expedition/Navigator applications listed below. Fitment confirmed against Injen's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor 3.5L twin turbo |
| 2015-2026 | Ford | F-150 | 3.5L twin turbo (not hybrid) |
| 2018-2026 | Ford / Lincoln | Expedition / Navigator | 3.5L twin turbo |
$568.08
The Injen PF9032RB is a cold air intake in Midnight Black for the 2017-2026 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost. It also fits the 2015-2026 F-150 3.5L twin turbo and the 2018-2026 Expedition and Navigator. Dual 3.5-inch inlets feed two dry filters, so the engine draws in cooler air with less restriction.
Airflow and torque. Injen claims up to 12 horsepower and 24 lb-ft of torque. The photos include a Dynojet comparison chart and an airflow cutaway of the intake tube.
A heat shield and two filters. The kit includes a heat shield and two X-1079-BB dry filters, which keep hot engine-bay air away from the intake. The tubes are cross-linked polyethylene (XLPE), and the kit comes with the hardware to install it.
Features
- Midnight Black finish
- Dual 3.5-inch inlets with two dry filters (X-1079-BB)
- Heat shield included
- XLPE intake tubes
- Up to 12 hp and 24 lb-ft claimed
- Does not fit hybrid models; the 2.7L is not listed
Emissions
Injen states this system is not currently CARB exempt and is not for sale or use on California-registered vehicles or in other states that follow California rules. Prop 65 warning applies.
Fitment: 2017-2026 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost, plus the F-150 and Expedition/Navigator applications listed below. Fitment confirmed against Injen's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor 3.5L twin turbo |
| 2015-2026 | Ford | F-150 | 3.5L twin turbo (not hybrid) |
| 2018-2026 | Ford / Lincoln | Expedition / Navigator | 3.5L twin turbo |
$568.08
The Injen PF9032RRB is a cold air intake in Race Blue for the 2017-2026 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost. It also fits the 2015-2026 F-150 3.5L twin turbo and the 2018-2026 Expedition and Navigator. Dual 3.5-inch inlets feed two dry filters, so the engine draws in cooler air with less restriction.
Airflow and torque. Injen claims up to 12 horsepower and 24 lb-ft of torque. The photos include a Dynojet comparison chart and an airflow cutaway of the intake tube.
A heat shield and two filters. The kit includes a heat shield and two X-1079-BB dry filters, which keep hot engine-bay air away from the intake. The tubes are cross-linked polyethylene (XLPE), and the kit comes with the hardware to install it.
Features
- Race Blue finish
- Dual 3.5-inch inlets with two dry filters (X-1079-BB)
- Heat shield included
- XLPE intake tubes
- Up to 12 hp and 24 lb-ft claimed
- Does not fit hybrid models; the 2.7L is not listed
Emissions
Injen states this system is not currently CARB exempt and is not for sale or use on California-registered vehicles or in other states that follow California rules. Prop 65 warning applies.
Fitment: 2017-2026 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost, plus the F-150 and Expedition/Navigator applications listed below. Fitment confirmed against Injen's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor 3.5L twin turbo |
| 2015-2026 | Ford | F-150 | 3.5L twin turbo (not hybrid) |
| 2018-2026 | Ford / Lincoln | Expedition / Navigator | 3.5L twin turbo |
$263.25
The Injen X-Pedal Pro Black Edition is a plug-and-play throttle controller that sharpens or softens the throttle response of the 2017-2020 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost. It also covers other F-150 trucks, the 2016-2020 Chevrolet Camaro and the 2011-2020 Dodge Charger listed below.
Throttle response on demand. Nine Sport levels make the pedal feel more eager, and seven Eco levels soften it for smoother, more economical driving. It works with automatic and manual transmissions and processes the pedal signal 1,000 times per second.
Extra functions. An anti-skid setting helps tame the pedal on slippery surfaces, and a launch control mode is built in.
Simple to fit. It plugs into the vehicle harness with the included connectors, so there is no cutting or splicing, and the controller weighs about one pound.
Features
- Nine Sport and seven Eco throttle levels
- Anti-skid and launch control modes
- Plug-and-play harness connectors
- Works with automatic and manual transmissions
- 1,000 pedal-signal updates per second
Fitment: 2017-2020 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost, plus the other vehicles listed below. Fitment confirmed against Injen's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor 3.5L twin turbo |
| 2015-2020 | Ford | F-150 | 2.7L and 3.5L twin turbo |
| 2015-2019 | Ford | F-150 | 5.0L V8 |
| 2016-2020 | Chevrolet | Camaro | 2.0L turbo, 6.2L (SS) |
| 2011-2020 | Dodge | Charger | 3.6L, 5.7L, 6.4L, 6.2L supercharged (2015-2016) |
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.