Welcome to RaptorsOnly.com
-
Brands
Shop by brand
- 3D MAXpider
- Access
- Addictive Desert Designs
- Advan
- AEM Induction
- aFe
- Air Lift
- Airaid
- Alcon
- AlphaRex
- AMP Research
- AMS
- Anderson Composites
- ANZO
- ARB
- Atturo Tire
- AutoMeter
- AVS
- AWE Tuning
- BackRack
- Baer Brakes
- Baja Designs
- BAK
- Banks Power
- BBK
- BBS
- BD Diesel
- Belltech
- Bestop
- BFGoodrich
- BMC
- Body Armor 4x4
- Borla
- Brembo
- Brembo OE
- Bully Dog
- Bushwacker
- Camburg
- Clevite
- COBB
- Cometic Gasket
- COMP Cams
- CORSA Performance
- Covercraft
- CSF
- DBA
- DeatschWerks
- DFC
- Diode Dynamics
- DS18
- DV8 Offroad
- Eaton
- EBC
- Eibach
- Enkei
- Extang
- Fabtech
- Fel-Pro
- fifteen52
- Firestone
- Flowmaster
- Ford Racing
- Forgestar
- FORM Lighting
- FOX
- Garrett
- Gates
- GEN-Y Hitch
- Go Fast Bits
- Go Rhino
- Gram Lights
- Granatelli Motor Sports
- GSC Power Division
- Hawk Performance
- Hella
- Hellwig
- Hotchkis
- Husky Liners
- ICON
- Injen
- J&L
- JBA
- JLT
- K&N Engineering
- KC HiLiTES
- King Engine Bearings
- King Shocks
- Kleinn Air Horns
- Kooks Headers
- KYB
- LIQUI MOLY
- LUND
- Magnaflow
- Mahle OE
- Maxtrac
- Mayhem
- MBRP
- McGard
- Method Wheels
- MGP
- Michelin
- Mickey Thompson
- Mishimoto
- Moog
- Motul
- MTX Wheels
- N-Fab
- Nacho Offroad Technology
- NGK
- Nitrous Express
- Odyssey Battery
- ORACLE Lighting
- PowerStop
- Putco
- QA1
- Raceline
- Radium Engineering
- Rally Armor
- Rampage
- Raxiom
- Retrax
- Rhino-Rack
- Ridetech
- Rigid Industries
- Rival 4x4
- RockJock
- Roll-N-Lock
- Roush
- Royal Purple
- SCT Performance
- Skyjacker
- Snow Performance
- SPC Performance
- SPOD
- Stainless Works
- Superlift
- Superpro
- Timbren
- Torque Solution
- TOYO
- Truxedo
- Tuff Country
- Turbosmart
- UMI Performance
- Undercover
- Volant
- Vossen
- Wagner Tuning
- WeatherTech
- Weld
- Westin
- Whiteline
- Wilwood
- Yokohama Tire
- Yukon Gear & Axle
- Zone Offroad
No brands found. Try another name or initial.
156 brands
View all brands -
F-150 Raptor
- F-150 Raptor
-
1st Gen (2010-2014)
-
2nd Gen (2017-2020)
-
3rd Gen (2021-Present)
-
Raptor R (2023-Present)
-
Bronco Raptor
- Bronco Raptor
-
Suspension
-
Lighting
-
Bumpers & Armor
-
Racks
-
Interior Accessories
-
Exterior Accessories
-
Performance
-
Wheels & Tires
-
Brakes
-
Drivetrain
-
Engine & Cooling
-
Ranger Raptor
- Ranger Raptor
-
Suspension
-
Lighting
-
Bumpers & Armor
-
Racks
-
Interior Accessories
-
Exterior Accessories
-
Performance
-
Wheels & Tires
-
Brakes
-
Drivetrain
-
Engine & Cooling
Your cart
You'll love this too
Discount invalid. Please make sure the discount details are correct.
Discount code is already applied.
Discount applied!
Subheading
Product comparison
Describe you product comparison grid
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
A Pillar Lights
Choose a type to refine the products below.
2 products
2 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$384.95
Fits 2017-2021 Ford F-150 Raptor.
This Baja Designs A-pillar light kit mounts auxiliary Squadron Sport LED pods at the base of the windshield in the hood ditch position, giving you forward lighting where the factory headlights leave a dark gap. It is a bolt-on setup for the factory hood hinge/A-pillar mounting points, so no cutting or drilling is required.
The kit is built around Baja Designs' off-road lighting hardware and includes a spot beam pattern with a clear lens. The housings are black powder-coated cast aluminum, the bezels are cast aluminum, the front lenses are hard-coated polycarbonate, and the brackets and mounting hardware are stainless steel. Baja Designs also calls out uService replaceable lenses and optical components, ClearView optical distribution, MoistureBlock sealing, CopperDrive circuitry, DirectSink thermal management, and built-in overvoltage protection.
- MPN: 447680
- Vehicle fitment: 2017-2021 Ford F-150 Raptor
- Mounting position: A-pillar / hood ditch
- Beam pattern: Spot
- Lens color: Clear
- Housing color: Black
- Light pod size: 3 in square; 3.07 in H x 2.77 in D x 3.07 in W
- Per-pod weight: 12 oz
- LED count: 4 LEDs per pod
- Operating voltage: 9-36V DC
- Rated life: 49,930 hours average
- Waterproof rating: IP69K
- Impact rating: IK10 compliant
- Environmental durability: exceeds MIL-STD810G
- Color temperature: 5000K daylight
The box includes two Squadron Sport LED light pods, two vehicle-specific A-pillar mounting brackets, a wiring harness, and stainless steel mounting hardware. The harness type is described differently by retailers, but it is supplied as the wiring harness needed to complete the install. Wiring is straightforward on the truck, but the exact access steps, wrench sizes, and torque specs are vehicle-dependent and were not provided on the product page. As with most hood-hinge light mounts, plan to aim the pods after installation so the spot pattern lands where you want it on the road or trail.
Baja Designs' published output figures also vary by source for this part number, so the safe details to rely on are the fitment, beam pattern, construction, and included hardware above.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2021 | Ford | F-150 | Raptor |
$604.95
Fits 2015-2020 Ford F-150 King Ranch, Lariat, Limited, Platinum, Police Responder, SSV, XL, and XLT, plus 2017-2020 Ford F-150 Raptor.
This Baja Designs Squadron Pro 2.0 A-pillar ditch light kit mounts a pair of compact square LED pods to the factory A-pillar location for added forward and side illumination on trail, dirt, and low-light road use. It uses spot beam optics with a clear lens, a 5000K daylight color temperature, and a user-selectable 9-color backlight.
The pods use cast aluminum housings, hardcoated polycarbonate lenses, DirectSink direct thermal path technology, and Baja Designs' CopperDrive LED driver at 100% capacity. Each light pod draws 65W and 4.7A at 13.8V, produces 5,921 lumens, and operates on 10V-36V DC for the white light and 11V-14V for the backlight. The kit uses a heavy-duty 4-pin Deutsch connector and IP69K sealing with MoistureBlock protection.
- Part number: 440068
- Kit includes 2 Squadron Pro 2.0 clear spot LED pod lights
- Vehicle-specific A-pillar mounting brackets
- Required mounting hardware
- Direct bolt-on installation with no cutting, drilling, or vehicle modification required
- Requires connection to a 4-pin Deutsch wiring harness
- Includes dedicated wiring leads for primary lighting and selectable backlight function
- uService design allows user-replaceable lenses and optics with clip-in reflectors
- Redesigned bracket allows increased vertical adjustment for beam aiming
- Refined optics reduce unwanted light spill while extending beam distance and side coverage
- 30-Day Satisfaction Guarantee and Limited Lifetime Warranty
Each pod measures 3.32 in deep, 3.29 in high, and 2.84 in long. The compact form factor keeps the lights tucked tight to the A-pillar while still giving you a precise, adjustable beam. The kit arrives ready for wiring and mounting; a proper harness connection is required to complete the install.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2020 | Ford | F-150 | King Ranch |
| 2015-2020 | Ford | F-150 | Lariat |
| 2016-2020 | Ford | F-150 | Limited |
| 2015-2020 | Ford | F-150 | Platinum |
| 2018-2020 | Ford | F-150 | Police Responder |
| 2017-2020 | Ford | F-150 | Raptor |
| 2016-2020 | Ford | F-150 | SSV |
| 2015-2020 | Ford | F-150 | XL |
| 2015-2020 | Ford | F-150 | XLT |
- Choosing a selection results in a full page refresh.
- Opens in a new window.