Welcome to RaptorsOnly.com
-
Brands
Shop by brand
- 3D MAXpider
- Access
- Addictive Desert Designs
- Advan
- AEM Induction
- aFe
- Air Lift
- Airaid
- Alcon
- AlphaRex
- AMP Research
- AMS
- Anderson Composites
- ANZO
- ARB
- Atturo Tire
- AutoMeter
- AVS
- AWE Tuning
- BackRack
- Baer Brakes
- Baja Designs
- BAK
- Banks Power
- BBK
- BBS
- BD Diesel
- Belltech
- Bestop
- BFGoodrich
- BMC
- Body Armor 4x4
- Borla
- Brembo
- Brembo OE
- Bully Dog
- Bushwacker
- Camburg
- Clevite
- COBB
- Cometic Gasket
- COMP Cams
- CORSA Performance
- Covercraft
- CSF
- DBA
- DeatschWerks
- DFC
- Diode Dynamics
- DS18
- DV8 Offroad
- Eaton
- EBC
- Eibach
- Enkei
- Extang
- Fabtech
- Fel-Pro
- fifteen52
- Firestone
- Flowmaster
- Ford Racing
- Forgestar
- FORM Lighting
- FOX
- Garrett
- Gates
- GEN-Y Hitch
- Go Fast Bits
- Go Rhino
- Gram Lights
- Granatelli Motor Sports
- GSC Power Division
- Hawk Performance
- Hella
- Hellwig
- Hotchkis
- Husky Liners
- ICON
- Injen
- J&L
- JBA
- JLT
- K&N Engineering
- KC HiLiTES
- King Engine Bearings
- King Shocks
- Kleinn Air Horns
- Kooks Headers
- KYB
- LIQUI MOLY
- LUND
- Magnaflow
- Mahle OE
- Maxtrac
- Mayhem
- MBRP
- McGard
- Method Wheels
- MGP
- Michelin
- Mickey Thompson
- Mishimoto
- Moog
- Motul
- MTX Wheels
- N-Fab
- Nacho Offroad Technology
- NGK
- Nitrous Express
- Odyssey Battery
- ORACLE Lighting
- PowerStop
- Putco
- QA1
- Raceline
- Radium Engineering
- Rally Armor
- Rampage
- Raxiom
- Retrax
- Rhino-Rack
- Ridetech
- Rigid Industries
- Rival 4x4
- RockJock
- Roll-N-Lock
- Roush
- Royal Purple
- SCT Performance
- Skyjacker
- Snow Performance
- SPC Performance
- SPOD
- Stainless Works
- Superlift
- Superpro
- Timbren
- Torque Solution
- TOYO
- Truxedo
- Tuff Country
- Turbosmart
- UMI Performance
- Undercover
- Volant
- Vossen
- Wagner Tuning
- WeatherTech
- Weld
- Westin
- Whiteline
- Wilwood
- Yokohama Tire
- Yukon Gear & Axle
- Zone Offroad
No brands found. Try another name or initial.
156 brands
View all brands -
F-150 Raptor
- F-150 Raptor
-
1st Gen (2010-2014)
-
2nd Gen (2017-2020)
-
3rd Gen (2021-Present)
-
Raptor R (2023-Present)
-
Bronco Raptor
- Bronco Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
-
Ranger Raptor
- Ranger Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
Your cart
You'll love this too
Discount invalid. Please make sure the discount details are correct.
Discount code is already applied.
Discount applied!
Subheading
Product comparison
Describe you product comparison grid
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
Find wheels and tires that fit your Raptor
Pick your truck and we'll narrow the catalogue to the wheels drilled for your bolt pattern and the tire sizes that fit your rims.
Shopping for
- Bolt pattern
- Hub bore
- Factory tire
365 products
365 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$600.00
$870.00
$410.00
$410.00
$415.00
$545.00
$545.00
Forgestar X12 Series wheels deliver a striking balance of high-end luxury aesthetics and performance-driven engineering for modern full-size trucks and SUVs. Designed with a bold multi-spoke layout and an aggressive deep concave profile, these wheels create a commanding stance that completely transforms vehicles like the Ford F-150, Chevy Silverado, and GMC Sierra. Utilizing a rotary-formed monoblock construction, the X12 slashes unsprung weight to improve handling and traction without sacrificing structural integrity. Available in premium Gloss Black and Satin Anthracite finishes, it provides the ultimate combination of street style and heavy-duty durability.
- Offered in premium finishes including gloss anthracite, gloss black, gloss brushed, and satin bronze
- Rotary formed construction provides exceptional structural strength while cutting rotating mass
- Tailored specifically for modern 6-lug Ford, Chevy, GMC, and Cadillac trucks and SUVs
- Spans deep and super deep concave profiles to give your vehicle an aggressive stance
- Features excellent barrel clearance to comfortably accommodate larger big brake kits
$655.00
$545.00
The Enkei Trail-Tracker 18x9 in matte black is a wheel Enkei built for trucks and SUVs that demand strength and durability. This listing is the 18x9, 6x135, ET12 version, part number 560-890-9512BK. It is listed here for the F-150 Raptor, F-150 Raptor R and Bronco Raptor.
Built for work, street and trail. Enkei engineered the Trail-Tracker for the everyday demands of work, street driving and off-road adventure, and lists the Ford Raptor among the popular truck applications it is designed to fit. It is offered in matte black, matte bronze (special order) and a black machined finish in select sizes.
Spec-E tested. Enkei runs its own Spec-E test standard, which it says is tougher than the JWL requirement: a higher drop point in the impact test and 20% more cycles in the rotary bending fatigue and dynamic radial fatigue tests.
Specifications.
- Size: 18x9
- Bolt pattern: 6x135
- Offset: ET12 (12 mm)
- Backspacing: 4.97 in (calculated from width and offset)
- Center bore: 87.1 mm
- Finish: Matte Black
- Enkei part number: 560-890-9512BK
Features
- Trail-Tracker design in matte black
- Enkei Spec-E inspected
- Published by Enkei as 18x9, 6X135, 12 inset
Fitment: Enkei publishes this wheel as 18x9, 6X135 with a 12 inset and does not name vehicles for it. The 6x135 pattern is used by the Ford F-150 Raptor, F-150 Raptor R and Bronco Raptor, whose hub bore is 87.1 mm, so this wheel is listed for the 2017-2026 F-150 Raptor, 2023-2026 F-150 Raptor R and 2022-2026 Bronco Raptor. This wheel's 87.1 mm center bore matches the 87.1 mm hub size. These trucks use an M14x1.5 lug thread, and lug nuts are not listed with this wheel. It is not a fit for the Ranger Raptor, which uses a 6x139.7 pattern. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory F-150 Raptor, F-150 Raptor R and Bronco Raptor wheel is about +34 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
The Enkei Trail-Tracker 18x9 in matte black is a wheel Enkei built for trucks and SUVs that demand strength and durability. This listing is the 18x9, 6x139.7, ET-12 version, part number 560-890-84N12BK. It is listed here for the Ranger Raptor.
Built for work, street and trail. Enkei engineered the Trail-Tracker for the everyday demands of work, street driving and off-road adventure. It is offered in matte black, matte bronze (special order) and a black machined finish in select sizes.
Spec-E tested. Enkei runs its own Spec-E test standard, which it says is tougher than the JWL requirement: a higher drop point in the impact test and 20% more cycles in the rotary bending fatigue and dynamic radial fatigue tests.
Specifications.
- Size: 18x9
- Bolt pattern: 6x139.7
- Offset: ET-12 (-12 mm)
- Backspacing: 4.03 in (calculated from width and offset)
- Center bore: 106.1 mm
- Finish: Matte Black
- Enkei part number: 560-890-84N12BK
Features
- Trail-Tracker design in matte black
- Enkei Spec-E inspected
- Published by Enkei as 18x9, 6X139.7, -12 inset
Fitment: Enkei publishes this wheel as 18x9, 6X139.7 with a -12 inset and does not name vehicles for it. The 6x139.7 (6x5.5) pattern is used by the Ford Ranger Raptor, whose hub bore is 93.1 mm, so this wheel is listed for the 2024-2026 Ranger Raptor only. It is not a fit for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use a 6x135 pattern. This wheel's 106.1 mm center bore is larger than the Ranger Raptor hub, so hub-centric rings are used to center it. The Ranger Raptor lug thread is M12x1.5, and lug nuts are not listed with this wheel. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor wheel is about +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The Enkei Trail-Tracker 18x9 in matte black is a wheel Enkei built for trucks and SUVs that demand strength and durability. This listing is the 18x9, 6x139.7, ET42 version, part number 560-890-8442BK. It is listed here for the Ranger Raptor.
Built for work, street and trail. Enkei engineered the Trail-Tracker for the everyday demands of work, street driving and off-road adventure. It is offered in matte black, matte bronze (special order) and a black machined finish in select sizes.
Spec-E tested. Enkei runs its own Spec-E test standard, which it says is tougher than the JWL requirement: a higher drop point in the impact test and 20% more cycles in the rotary bending fatigue and dynamic radial fatigue tests.
Specifications.
- Size: 18x9
- Bolt pattern: 6x139.7
- Offset: ET42 (42 mm)
- Backspacing: 6.15 in (calculated from width and offset)
- Center bore: 106.1 mm
- Finish: Matte Black
- Enkei part number: 560-890-8442BK
Features
- Trail-Tracker design in matte black
- Enkei Spec-E inspected
- Published by Enkei as 18x9, 6X139.7, 42 inset
Fitment: Enkei publishes this wheel as 18x9, 6X139.7 with a 42 inset and does not name vehicles for it. The 6x139.7 (6x5.5) pattern is used by the Ford Ranger Raptor, whose hub bore is 93.1 mm, so this wheel is listed for the 2024-2026 Ranger Raptor only. It is not a fit for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use a 6x135 pattern. This wheel's 106.1 mm center bore is larger than the Ranger Raptor hub, so hub-centric rings are used to center it. The Ranger Raptor lug thread is M12x1.5, and lug nuts are not listed with this wheel. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor wheel is about +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The Enkei Trail-Tracker 18x9 in matte black is a wheel Enkei built for trucks and SUVs that demand strength and durability. This listing is the 18x9, 6x139.7, ET20 version, part number 560-890-8420BK. It is listed here for the Ranger Raptor.
Built for work, street and trail. Enkei engineered the Trail-Tracker for the everyday demands of work, street driving and off-road adventure. It is offered in matte black, matte bronze (special order) and a black machined finish in select sizes.
Spec-E tested. Enkei runs its own Spec-E test standard, which it says is tougher than the JWL requirement: a higher drop point in the impact test and 20% more cycles in the rotary bending fatigue and dynamic radial fatigue tests.
Specifications.
- Size: 18x9
- Bolt pattern: 6x139.7
- Offset: ET20 (20 mm)
- Backspacing: 5.29 in (calculated from width and offset)
- Center bore: 106.1 mm
- Finish: Matte Black
- Enkei part number: 560-890-8420BK
Features
- Trail-Tracker design in matte black
- Enkei Spec-E inspected
- Published by Enkei as 18x9, 6X139.7, 20 inset
Fitment: Enkei publishes this wheel as 18x9, 6X139.7 with a 20 inset and does not name vehicles for it. The 6x139.7 (6x5.5) pattern is used by the Ford Ranger Raptor, whose hub bore is 93.1 mm, so this wheel is listed for the 2024-2026 Ranger Raptor only. It is not a fit for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use a 6x135 pattern. This wheel's 106.1 mm center bore is larger than the Ranger Raptor hub, so hub-centric rings are used to center it. The Ranger Raptor lug thread is M12x1.5, and lug nuts are not listed with this wheel. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor wheel is about +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The Enkei Trail-Tracker 18x9 in matte black is a wheel Enkei built for trucks and SUVs that demand strength and durability. This listing is the 18x9, 6x139.7, ET0 version, part number 560-890-8400BK. It is listed here for the Ranger Raptor.
Built for work, street and trail. Enkei engineered the Trail-Tracker for the everyday demands of work, street driving and off-road adventure. It is offered in matte black, matte bronze (special order) and a black machined finish in select sizes.
Spec-E tested. Enkei runs its own Spec-E test standard, which it says is tougher than the JWL requirement: a higher drop point in the impact test and 20% more cycles in the rotary bending fatigue and dynamic radial fatigue tests.
Specifications.
- Size: 18x9
- Bolt pattern: 6x139.7
- Offset: ET0 (0 mm)
- Backspacing: 4.50 in (calculated from width and offset)
- Center bore: 106.1 mm
- Finish: Matte Black
- Enkei part number: 560-890-8400BK
Features
- Trail-Tracker design in matte black
- Enkei Spec-E inspected
- Published by Enkei as 18x9, 6X139.7, 0 inset
Fitment: Enkei publishes this wheel as 18x9, 6X139.7 with a 0 inset and does not name vehicles for it. The 6x139.7 (6x5.5) pattern is used by the Ford Ranger Raptor, whose hub bore is 93.1 mm, so this wheel is listed for the 2024-2026 Ranger Raptor only. It is not a fit for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use a 6x135 pattern. This wheel's 106.1 mm center bore is larger than the Ranger Raptor hub, so hub-centric rings are used to center it. The Ranger Raptor lug thread is M12x1.5, and lug nuts are not listed with this wheel. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor wheel is about +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The Enkei Trail-Tracker 20x9 in matte black is a wheel Enkei built for trucks and SUVs that demand strength and durability. This listing is the 20x9, 6x139.7, ET39 version, part number 560-290-8439BK. It is listed here for the Ranger Raptor.
Built for work, street and trail. Enkei engineered the Trail-Tracker for the everyday demands of work, street driving and off-road adventure. It is offered in matte black, matte bronze (special order) and a black machined finish in select sizes.
Spec-E tested. Enkei runs its own Spec-E test standard, which it says is tougher than the JWL requirement: a higher drop point in the impact test and 20% more cycles in the rotary bending fatigue and dynamic radial fatigue tests.
Specifications.
- Size: 20x9
- Bolt pattern: 6x139.7
- Offset: ET39 (39 mm)
- Backspacing: 6.04 in (calculated from width and offset)
- Center bore: 106.1 mm
- Finish: Matte Black
- Enkei part number: 560-290-8439BK
Features
- Trail-Tracker design in matte black
- Enkei Spec-E inspected
- Published by Enkei as 20x9, 6X139.7, 39 inset
Fitment: Enkei publishes this wheel as 20x9, 6X139.7 with a 39 inset and does not name vehicles for it. The 6x139.7 (6x5.5) pattern is used by the Ford Ranger Raptor, whose hub bore is 93.1 mm, so this wheel is listed for the 2024-2026 Ranger Raptor only. It is not a fit for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use a 6x135 pattern. This wheel's 106.1 mm center bore is larger than the Ranger Raptor hub, so hub-centric rings are used to center it. The Ranger Raptor lug thread is M12x1.5, and lug nuts are not listed with this wheel. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor wheel is about +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The Enkei Trail-Tracker 20x9 in matte black is a wheel Enkei built for trucks and SUVs that demand strength and durability. This listing is the 20x9, 6x139.7, ET20 version, part number 560-290-8420BK. It is listed here for the Ranger Raptor.
Built for work, street and trail. Enkei engineered the Trail-Tracker for the everyday demands of work, street driving and off-road adventure. It is offered in matte black, matte bronze (special order) and a black machined finish in select sizes.
Spec-E tested. Enkei runs its own Spec-E test standard, which it says is tougher than the JWL requirement: a higher drop point in the impact test and 20% more cycles in the rotary bending fatigue and dynamic radial fatigue tests.
Specifications.
- Size: 20x9
- Bolt pattern: 6x139.7
- Offset: ET20 (20 mm)
- Backspacing: 5.29 in (calculated from width and offset)
- Center bore: 106.1 mm
- Finish: Matte Black
- Enkei part number: 560-290-8420BK
Features
- Trail-Tracker design in matte black
- Enkei Spec-E inspected
- Published by Enkei as 20x9, 6X139.7, 20 inset
Fitment: Enkei publishes this wheel as 20x9, 6X139.7 with a 20 inset and does not name vehicles for it. The 6x139.7 (6x5.5) pattern is used by the Ford Ranger Raptor, whose hub bore is 93.1 mm, so this wheel is listed for the 2024-2026 Ranger Raptor only. It is not a fit for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use a 6x135 pattern. This wheel's 106.1 mm center bore is larger than the Ranger Raptor hub, so hub-centric rings are used to center it. The Ranger Raptor lug thread is M12x1.5, and lug nuts are not listed with this wheel. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor wheel is about +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The Enkei Trail-Finder 18x9 in matte bronze is a six-spoke wheel that Enkei describes as blending off-road durability with a modern, sporty look. This listing is the 18x9, 6x135, ET12 version, part number 558-890-9512ZP. It is listed here for the F-150 Raptor, F-150 Raptor R and Bronco Raptor.
Rugged six-spoke design. Enkei built the Trail-Finder for adventure without giving up everyday style, and offers it in matte bronze or matte black in 17, 18 and 20 inch sizes. Enkei's own page pitches it at small SUVs and crossovers, so check clearance and tire choice for your truck.
Spec-E tested. Enkei runs its own Spec-E test standard, which it says is tougher than the JWL requirement: a higher drop point in the impact test and 20% more cycles in the rotary bending fatigue and dynamic radial fatigue tests.
Specifications.
- Size: 18x9
- Bolt pattern: 6x135
- Offset: ET12 (12 mm)
- Backspacing: 4.97 in (calculated from width and offset)
- Center bore: 87.1 mm
- Finish: Matte Bronze
- Enkei part number: 558-890-9512ZP
Features
- Six-spoke Trail-Finder design in matte bronze
- Enkei Spec-E inspected
- Published by Enkei as 18x9, 6X135, 12 inset
Fitment: Enkei publishes this wheel as 18x9, 6X135 with a 12 inset and does not name vehicles for it. The 6x135 pattern is used by the Ford F-150 Raptor, F-150 Raptor R and Bronco Raptor, whose hub bore is 87.1 mm, so this wheel is listed for the 2017-2026 F-150 Raptor, 2023-2026 F-150 Raptor R and 2022-2026 Bronco Raptor. This wheel's 87.1 mm center bore matches the 87.1 mm hub size. These trucks use an M14x1.5 lug thread, and lug nuts are not listed with this wheel. It is not a fit for the Ranger Raptor, which uses a 6x139.7 pattern. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory F-150 Raptor, F-150 Raptor R and Bronco Raptor wheel is about +34 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
The Enkei Trail-Finder 18x9 in matte black is a six-spoke wheel that Enkei describes as blending off-road durability with a modern, sporty look. This listing is the 18x9, 6x135, ET12 version, part number 558-890-9512BK. It is listed here for the F-150 Raptor, F-150 Raptor R and Bronco Raptor.
Rugged six-spoke design. Enkei built the Trail-Finder for adventure without giving up everyday style, and offers it in matte bronze or matte black in 17, 18 and 20 inch sizes. Enkei's own page pitches it at small SUVs and crossovers, so check clearance and tire choice for your truck.
Spec-E tested. Enkei runs its own Spec-E test standard, which it says is tougher than the JWL requirement: a higher drop point in the impact test and 20% more cycles in the rotary bending fatigue and dynamic radial fatigue tests.
Specifications.
- Size: 18x9
- Bolt pattern: 6x135
- Offset: ET12 (12 mm)
- Backspacing: 4.97 in (calculated from width and offset)
- Center bore: 87.1 mm
- Finish: Matte Black
- Enkei part number: 558-890-9512BK
Features
- Six-spoke Trail-Finder design in matte black
- Enkei Spec-E inspected
- Published by Enkei as 18x9, 6X135, 12 inset
Fitment: Enkei publishes this wheel as 18x9, 6X135 with a 12 inset and does not name vehicles for it. The 6x135 pattern is used by the Ford F-150 Raptor, F-150 Raptor R and Bronco Raptor, whose hub bore is 87.1 mm, so this wheel is listed for the 2017-2026 F-150 Raptor, 2023-2026 F-150 Raptor R and 2022-2026 Bronco Raptor. This wheel's 87.1 mm center bore matches the 87.1 mm hub size. These trucks use an M14x1.5 lug thread, and lug nuts are not listed with this wheel. It is not a fit for the Ranger Raptor, which uses a 6x139.7 pattern. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory F-150 Raptor, F-150 Raptor R and Bronco Raptor wheel is about +34 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
The Enkei Trail-Finder 18x9 in matte bronze is a six-spoke wheel that Enkei describes as blending off-road durability with a modern, sporty look. This listing is the 18x9, 6x139.7, ET-12 version, part number 558-890-84N12ZP. It is listed here for the Ranger Raptor.
Rugged six-spoke design. Enkei built the Trail-Finder for adventure without giving up everyday style, and offers it in matte bronze or matte black in 17, 18 and 20 inch sizes. Enkei's own page pitches it at small SUVs and crossovers, so check clearance and tire choice for your truck.
Spec-E tested. Enkei runs its own Spec-E test standard, which it says is tougher than the JWL requirement: a higher drop point in the impact test and 20% more cycles in the rotary bending fatigue and dynamic radial fatigue tests.
Specifications.
- Size: 18x9
- Bolt pattern: 6x139.7
- Offset: ET-12 (-12 mm)
- Backspacing: 4.03 in (calculated from width and offset)
- Center bore: 106.1 mm
- Finish: Matte Bronze
- Enkei part number: 558-890-84N12ZP
Features
- Six-spoke Trail-Finder design in matte bronze
- Enkei Spec-E inspected
- Published by Enkei as 18x9, 6X139.7, -12 inset
Fitment: Enkei publishes this wheel as 18x9, 6X139.7 with a -12 inset and does not name vehicles for it. The 6x139.7 (6x5.5) pattern is used by the Ford Ranger Raptor, whose hub bore is 93.1 mm, so this wheel is listed for the 2024-2026 Ranger Raptor only. It is not a fit for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use a 6x135 pattern. This wheel's 106.1 mm center bore is larger than the Ranger Raptor hub, so hub-centric rings are used to center it. The Ranger Raptor lug thread is M12x1.5, and lug nuts are not listed with this wheel. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor wheel is about +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The Enkei Trail-Finder 18x9 in matte black is a six-spoke wheel that Enkei describes as blending off-road durability with a modern, sporty look. This listing is the 18x9, 6x139.7, ET-12 version, part number 558-890-84N12BK. It is listed here for the Ranger Raptor.
Rugged six-spoke design. Enkei built the Trail-Finder for adventure without giving up everyday style, and offers it in matte bronze or matte black in 17, 18 and 20 inch sizes. Enkei's own page pitches it at small SUVs and crossovers, so check clearance and tire choice for your truck.
Spec-E tested. Enkei runs its own Spec-E test standard, which it says is tougher than the JWL requirement: a higher drop point in the impact test and 20% more cycles in the rotary bending fatigue and dynamic radial fatigue tests.
Specifications.
- Size: 18x9
- Bolt pattern: 6x139.7
- Offset: ET-12 (-12 mm)
- Backspacing: 4.03 in (calculated from width and offset)
- Center bore: 106.1 mm
- Finish: Matte Black
- Enkei part number: 558-890-84N12BK
Features
- Six-spoke Trail-Finder design in matte black
- Enkei Spec-E inspected
- Published by Enkei as 18x9, 6X139.7, -12 inset
Fitment: Enkei publishes this wheel as 18x9, 6X139.7 with a -12 inset and does not name vehicles for it. The 6x139.7 (6x5.5) pattern is used by the Ford Ranger Raptor, whose hub bore is 93.1 mm, so this wheel is listed for the 2024-2026 Ranger Raptor only. It is not a fit for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use a 6x135 pattern. This wheel's 106.1 mm center bore is larger than the Ranger Raptor hub, so hub-centric rings are used to center it. The Ranger Raptor lug thread is M12x1.5, and lug nuts are not listed with this wheel. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor wheel is about +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The Enkei Trail-Finder 18x9 in matte bronze is a six-spoke wheel that Enkei describes as blending off-road durability with a modern, sporty look. This listing is the 18x9, 6x139.7, ET42 version, part number 558-890-8442ZP. It is listed here for the Ranger Raptor.
Rugged six-spoke design. Enkei built the Trail-Finder for adventure without giving up everyday style, and offers it in matte bronze or matte black in 17, 18 and 20 inch sizes. Enkei's own page pitches it at small SUVs and crossovers, so check clearance and tire choice for your truck.
Spec-E tested. Enkei runs its own Spec-E test standard, which it says is tougher than the JWL requirement: a higher drop point in the impact test and 20% more cycles in the rotary bending fatigue and dynamic radial fatigue tests.
Specifications.
- Size: 18x9
- Bolt pattern: 6x139.7
- Offset: ET42 (42 mm)
- Backspacing: 6.15 in (calculated from width and offset)
- Center bore: 106.1 mm
- Finish: Matte Bronze
- Enkei part number: 558-890-8442ZP
Features
- Six-spoke Trail-Finder design in matte bronze
- Enkei Spec-E inspected
- Published by Enkei as 18x9, 6X139.7, 42 inset
Fitment: Enkei publishes this wheel as 18x9, 6X139.7 with a 42 inset and does not name vehicles for it. The 6x139.7 (6x5.5) pattern is used by the Ford Ranger Raptor, whose hub bore is 93.1 mm, so this wheel is listed for the 2024-2026 Ranger Raptor only. It is not a fit for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use a 6x135 pattern. This wheel's 106.1 mm center bore is larger than the Ranger Raptor hub, so hub-centric rings are used to center it. The Ranger Raptor lug thread is M12x1.5, and lug nuts are not listed with this wheel. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor wheel is about +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The Enkei Trail-Finder 18x9 in matte black is a six-spoke wheel that Enkei describes as blending off-road durability with a modern, sporty look. This listing is the 18x9, 6x139.7, ET42 version, part number 558-890-8442BK. It is listed here for the Ranger Raptor.
Rugged six-spoke design. Enkei built the Trail-Finder for adventure without giving up everyday style, and offers it in matte bronze or matte black in 17, 18 and 20 inch sizes. Enkei's own page pitches it at small SUVs and crossovers, so check clearance and tire choice for your truck.
Spec-E tested. Enkei runs its own Spec-E test standard, which it says is tougher than the JWL requirement: a higher drop point in the impact test and 20% more cycles in the rotary bending fatigue and dynamic radial fatigue tests.
Specifications.
- Size: 18x9
- Bolt pattern: 6x139.7
- Offset: ET42 (42 mm)
- Backspacing: 6.15 in (calculated from width and offset)
- Center bore: 106.1 mm
- Finish: Matte Black
- Enkei part number: 558-890-8442BK
Features
- Six-spoke Trail-Finder design in matte black
- Enkei Spec-E inspected
- Published by Enkei as 18x9, 6X139.7, 42 inset
Fitment: Enkei publishes this wheel as 18x9, 6X139.7 with a 42 inset and does not name vehicles for it. The 6x139.7 (6x5.5) pattern is used by the Ford Ranger Raptor, whose hub bore is 93.1 mm, so this wheel is listed for the 2024-2026 Ranger Raptor only. It is not a fit for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use a 6x135 pattern. This wheel's 106.1 mm center bore is larger than the Ranger Raptor hub, so hub-centric rings are used to center it. The Ranger Raptor lug thread is M12x1.5, and lug nuts are not listed with this wheel. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor wheel is about +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The Enkei Trail-Finder 18x9 in matte bronze is a six-spoke wheel that Enkei describes as blending off-road durability with a modern, sporty look. This listing is the 18x9, 6x139.7, ET20 version, part number 558-890-8420ZP. It is listed here for the Ranger Raptor.
Rugged six-spoke design. Enkei built the Trail-Finder for adventure without giving up everyday style, and offers it in matte bronze or matte black in 17, 18 and 20 inch sizes. Enkei's own page pitches it at small SUVs and crossovers, so check clearance and tire choice for your truck.
Spec-E tested. Enkei runs its own Spec-E test standard, which it says is tougher than the JWL requirement: a higher drop point in the impact test and 20% more cycles in the rotary bending fatigue and dynamic radial fatigue tests.
Specifications.
- Size: 18x9
- Bolt pattern: 6x139.7
- Offset: ET20 (20 mm)
- Backspacing: 5.29 in (calculated from width and offset)
- Center bore: 106.1 mm
- Finish: Matte Bronze
- Enkei part number: 558-890-8420ZP
Features
- Six-spoke Trail-Finder design in matte bronze
- Enkei Spec-E inspected
- Published by Enkei as 18x9, 6X139.7, 20 inset
Fitment: Enkei publishes this wheel as 18x9, 6X139.7 with a 20 inset and does not name vehicles for it. The 6x139.7 (6x5.5) pattern is used by the Ford Ranger Raptor, whose hub bore is 93.1 mm, so this wheel is listed for the 2024-2026 Ranger Raptor only. It is not a fit for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use a 6x135 pattern. This wheel's 106.1 mm center bore is larger than the Ranger Raptor hub, so hub-centric rings are used to center it. The Ranger Raptor lug thread is M12x1.5, and lug nuts are not listed with this wheel. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor wheel is about +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The Enkei Trail-Finder 18x9 in matte black is a six-spoke wheel that Enkei describes as blending off-road durability with a modern, sporty look. This listing is the 18x9, 6x139.7, ET20 version, part number 558-890-8420BK. It is listed here for the Ranger Raptor.
Rugged six-spoke design. Enkei built the Trail-Finder for adventure without giving up everyday style, and offers it in matte bronze or matte black in 17, 18 and 20 inch sizes. Enkei's own page pitches it at small SUVs and crossovers, so check clearance and tire choice for your truck.
Spec-E tested. Enkei runs its own Spec-E test standard, which it says is tougher than the JWL requirement: a higher drop point in the impact test and 20% more cycles in the rotary bending fatigue and dynamic radial fatigue tests.
Specifications.
- Size: 18x9
- Bolt pattern: 6x139.7
- Offset: ET20 (20 mm)
- Backspacing: 5.29 in (calculated from width and offset)
- Center bore: 106.1 mm
- Finish: Matte Black
- Enkei part number: 558-890-8420BK
Features
- Six-spoke Trail-Finder design in matte black
- Enkei Spec-E inspected
- Published by Enkei as 18x9, 6X139.7, 20 inset
Fitment: Enkei publishes this wheel as 18x9, 6X139.7 with a 20 inset and does not name vehicles for it. The 6x139.7 (6x5.5) pattern is used by the Ford Ranger Raptor, whose hub bore is 93.1 mm, so this wheel is listed for the 2024-2026 Ranger Raptor only. It is not a fit for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use a 6x135 pattern. This wheel's 106.1 mm center bore is larger than the Ranger Raptor hub, so hub-centric rings are used to center it. The Ranger Raptor lug thread is M12x1.5, and lug nuts are not listed with this wheel. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor wheel is about +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The Enkei Trail-Finder 18x9 in matte bronze is a six-spoke wheel that Enkei describes as blending off-road durability with a modern, sporty look. This listing is the 18x9, 6x139.7, ET0 version, part number 558-890-8400ZP. It is listed here for the Ranger Raptor.
Rugged six-spoke design. Enkei built the Trail-Finder for adventure without giving up everyday style, and offers it in matte bronze or matte black in 17, 18 and 20 inch sizes. Enkei's own page pitches it at small SUVs and crossovers, so check clearance and tire choice for your truck.
Spec-E tested. Enkei runs its own Spec-E test standard, which it says is tougher than the JWL requirement: a higher drop point in the impact test and 20% more cycles in the rotary bending fatigue and dynamic radial fatigue tests.
Specifications.
- Size: 18x9
- Bolt pattern: 6x139.7
- Offset: ET0 (0 mm)
- Backspacing: 4.50 in (calculated from width and offset)
- Center bore: 106.1 mm
- Finish: Matte Bronze
- Enkei part number: 558-890-8400ZP
Features
- Six-spoke Trail-Finder design in matte bronze
- Enkei Spec-E inspected
- Published by Enkei as 18x9, 6X139.7, 0 inset
Fitment: Enkei publishes this wheel as 18x9, 6X139.7 with a 0 inset and does not name vehicles for it. The 6x139.7 (6x5.5) pattern is used by the Ford Ranger Raptor, whose hub bore is 93.1 mm, so this wheel is listed for the 2024-2026 Ranger Raptor only. It is not a fit for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use a 6x135 pattern. This wheel's 106.1 mm center bore is larger than the Ranger Raptor hub, so hub-centric rings are used to center it. The Ranger Raptor lug thread is M12x1.5, and lug nuts are not listed with this wheel. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor wheel is about +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The Enkei Trail-Finder is a six-spoke truck wheel that Enkei builds for adventure driving without giving up everyday style. This is the 18x9 version in matte black, drilled 6x139.7 with a 0 mm offset, and Enkei lists the Trail-Finder as Spec-E inspected.
Built for trails and daily driving. Enkei describes the Trail-Finder as a rugged six-spoke wheel that blends off-road durability with a modern, sporty look.
Spec-E testing. Enkei engineered its own Spec-E test standard, which is tougher than the JWL standard: the impact test uses a higher drop point and the rotary bending and dynamic radial fatigue tests run 20% more cycles.
Matched by bolt pattern and center bore. The 6x139.7 (6x5.5 in) pattern is the Ranger Raptor pattern, and the 106.1 mm center bore is larger than the Ranger Raptor hub, so hub-centric rings are needed to center the wheel on the hub.
Features
- 18x9 size, 6x139.7 bolt pattern, 0 mm offset
- 106.1 mm center bore (use hub-centric rings on the Ranger Raptor hub)
- Matte black finish
- Six-spoke design
- Spec-E inspected by Enkei
Fitment: Enkei publishes this wheel as 18x9, 6x139.7, inset 0 on its Trail-Finder page and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor because Ford's Ranger Raptor uses a 6x139.7 bolt pattern and a 93.1 mm hub, and this wheel's bore is at least that large. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor wheel offset is +55 mm.
Wheels are sold without lug nuts (Enkei's page does not list any with this wheel). The Ranger Raptor uses M12x1.5 lug studs, so order matching lug nuts separately.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The Enkei Trail-Finder is a six-spoke truck wheel that Enkei builds for adventure driving without giving up everyday style. This is the 17x9 version in matte bronze, drilled 6x135 with a +12 mm offset, and Enkei lists the Trail-Finder as Spec-E inspected.
Built for trails and daily driving. Enkei describes the Trail-Finder as a rugged six-spoke wheel that blends off-road durability with a modern, sporty look.
Spec-E testing. Enkei engineered its own Spec-E test standard, which is tougher than the JWL standard: the impact test uses a higher drop point and the rotary bending and dynamic radial fatigue tests run 20% more cycles.
Matched by bolt pattern and center bore. The 6x135 pattern is the pattern used by the F-150 Raptor, F-150 Raptor R and Bronco Raptor, and the 87.1 mm center bore matches the 87.1 mm Ford hub, so no hub-centric rings are needed.
Features
- 17x9 size, 6x135 bolt pattern, +12 mm offset
- 87.1 mm center bore
- Matte bronze finish
- Six-spoke design
- Spec-E inspected by Enkei
Fitment: Enkei publishes this wheel as 17x9, 6x135, inset 12 on its Trail-Finder page and does not name vehicles. It is listed for the 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R and 2022-2026 Bronco Raptor because those trucks use a 6x135 bolt pattern and an 87.1 mm hub, and this wheel's bore matches it. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs. It is not listed for the 2010-2014 SVT Raptor because Enkei names no vehicles.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on these trucks is about +34 mm.
Wheels are sold without lug nuts (Enkei's page does not list any with this wheel). The F-150 Raptor (2017 and newer), Raptor R and Bronco Raptor use M14x1.5 lug studs, so order matching lug nuts separately.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
The Enkei Trail-Finder is a six-spoke truck wheel that Enkei builds for adventure driving without giving up everyday style. This is the 17x9 version in matte black, drilled 6x135 with a +12 mm offset, and Enkei lists the Trail-Finder as Spec-E inspected.
Built for trails and daily driving. Enkei describes the Trail-Finder as a rugged six-spoke wheel that blends off-road durability with a modern, sporty look.
Spec-E testing. Enkei engineered its own Spec-E test standard, which is tougher than the JWL standard: the impact test uses a higher drop point and the rotary bending and dynamic radial fatigue tests run 20% more cycles.
Matched by bolt pattern and center bore. The 6x135 pattern is the pattern used by the F-150 Raptor, F-150 Raptor R and Bronco Raptor, and the 87.1 mm center bore matches the 87.1 mm Ford hub, so no hub-centric rings are needed.
Features
- 17x9 size, 6x135 bolt pattern, +12 mm offset
- 87.1 mm center bore
- Matte black finish
- Six-spoke design
- Spec-E inspected by Enkei
Fitment: Enkei publishes this wheel as 17x9, 6x135, inset 12 on its Trail-Finder page and does not name vehicles. It is listed for the 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R and 2022-2026 Bronco Raptor because those trucks use a 6x135 bolt pattern and an 87.1 mm hub, and this wheel's bore matches it. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs. It is not listed for the 2010-2014 SVT Raptor because Enkei names no vehicles.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on these trucks is about +34 mm.
Wheels are sold without lug nuts (Enkei's page does not list any with this wheel). The F-150 Raptor (2017 and newer), Raptor R and Bronco Raptor use M14x1.5 lug studs, so order matching lug nuts separately.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
The Enkei Trail-Finder is a six-spoke truck wheel that Enkei builds for adventure driving without giving up everyday style. This is the 17x9 version in matte bronze, drilled 6x139.7 with a -12 mm offset, and Enkei lists the Trail-Finder as Spec-E inspected.
Built for trails and daily driving. Enkei describes the Trail-Finder as a rugged six-spoke wheel that blends off-road durability with a modern, sporty look.
Spec-E testing. Enkei engineered its own Spec-E test standard, which is tougher than the JWL standard: the impact test uses a higher drop point and the rotary bending and dynamic radial fatigue tests run 20% more cycles.
Matched by bolt pattern and center bore. The 6x139.7 (6x5.5 in) pattern is the Ranger Raptor pattern, and the 106.1 mm center bore is larger than the Ranger Raptor hub, so hub-centric rings are needed to center the wheel on the hub.
Features
- 17x9 size, 6x139.7 bolt pattern, -12 mm offset
- 106.1 mm center bore (use hub-centric rings on the Ranger Raptor hub)
- Matte bronze finish
- Six-spoke design
- Spec-E inspected by Enkei
Fitment: Enkei publishes this wheel as 17x9, 6x139.7, inset -12 on its Trail-Finder page and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor because Ford's Ranger Raptor uses a 6x139.7 bolt pattern and a 93.1 mm hub, and this wheel's bore is at least that large. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor wheel offset is +55 mm.
Wheels are sold without lug nuts (Enkei's page does not list any with this wheel). The Ranger Raptor uses M12x1.5 lug studs, so order matching lug nuts separately.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The Enkei Trail-Finder is a six-spoke truck wheel that Enkei builds for adventure driving without giving up everyday style. This is the 17x9 version in matte black, drilled 6x139.7 with a -12 mm offset, and Enkei lists the Trail-Finder as Spec-E inspected.
Built for trails and daily driving. Enkei describes the Trail-Finder as a rugged six-spoke wheel that blends off-road durability with a modern, sporty look.
Spec-E testing. Enkei engineered its own Spec-E test standard, which is tougher than the JWL standard: the impact test uses a higher drop point and the rotary bending and dynamic radial fatigue tests run 20% more cycles.
Matched by bolt pattern and center bore. The 6x139.7 (6x5.5 in) pattern is the Ranger Raptor pattern, and the 106.1 mm center bore is larger than the Ranger Raptor hub, so hub-centric rings are needed to center the wheel on the hub.
Features
- 17x9 size, 6x139.7 bolt pattern, -12 mm offset
- 106.1 mm center bore (use hub-centric rings on the Ranger Raptor hub)
- Matte black finish
- Six-spoke design
- Spec-E inspected by Enkei
Fitment: Enkei publishes this wheel as 17x9, 6x139.7, inset -12 on its Trail-Finder page and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor because Ford's Ranger Raptor uses a 6x139.7 bolt pattern and a 93.1 mm hub, and this wheel's bore is at least that large. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor wheel offset is +55 mm.
Wheels are sold without lug nuts (Enkei's page does not list any with this wheel). The Ranger Raptor uses M12x1.5 lug studs, so order matching lug nuts separately.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The Enkei Trail-Finder is a six-spoke truck wheel that Enkei builds for adventure driving without giving up everyday style. This is the 17x9 version in matte bronze, drilled 6x139.7 with a +20 mm offset, and Enkei lists the Trail-Finder as Spec-E inspected.
Built for trails and daily driving. Enkei describes the Trail-Finder as a rugged six-spoke wheel that blends off-road durability with a modern, sporty look.
Spec-E testing. Enkei engineered its own Spec-E test standard, which is tougher than the JWL standard: the impact test uses a higher drop point and the rotary bending and dynamic radial fatigue tests run 20% more cycles.
Matched by bolt pattern and center bore. The 6x139.7 (6x5.5 in) pattern is the Ranger Raptor pattern, and the 106.1 mm center bore is larger than the Ranger Raptor hub, so hub-centric rings are needed to center the wheel on the hub.
Features
- 17x9 size, 6x139.7 bolt pattern, +20 mm offset
- 106.1 mm center bore (use hub-centric rings on the Ranger Raptor hub)
- Matte bronze finish
- Six-spoke design
- Spec-E inspected by Enkei
Fitment: Enkei publishes this wheel as 17x9, 6x139.7, inset 20 on its Trail-Finder page and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor because Ford's Ranger Raptor uses a 6x139.7 bolt pattern and a 93.1 mm hub, and this wheel's bore is at least that large. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor wheel offset is +55 mm.
Wheels are sold without lug nuts (Enkei's page does not list any with this wheel). The Ranger Raptor uses M12x1.5 lug studs, so order matching lug nuts separately.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The Enkei Trail-Finder is a six-spoke truck wheel that Enkei builds for adventure driving without giving up everyday style. This is the 17x9 version in matte black, drilled 6x139.7 with a +20 mm offset, and Enkei lists the Trail-Finder as Spec-E inspected.
Built for trails and daily driving. Enkei describes the Trail-Finder as a rugged six-spoke wheel that blends off-road durability with a modern, sporty look.
Spec-E testing. Enkei engineered its own Spec-E test standard, which is tougher than the JWL standard: the impact test uses a higher drop point and the rotary bending and dynamic radial fatigue tests run 20% more cycles.
Matched by bolt pattern and center bore. The 6x139.7 (6x5.5 in) pattern is the Ranger Raptor pattern, and the 106.1 mm center bore is larger than the Ranger Raptor hub, so hub-centric rings are needed to center the wheel on the hub.
Features
- 17x9 size, 6x139.7 bolt pattern, +20 mm offset
- 106.1 mm center bore (use hub-centric rings on the Ranger Raptor hub)
- Matte black finish
- Six-spoke design
- Spec-E inspected by Enkei
Fitment: Enkei publishes this wheel as 17x9, 6x139.7, inset 20 on its Trail-Finder page and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor because Ford's Ranger Raptor uses a 6x139.7 bolt pattern and a 93.1 mm hub, and this wheel's bore is at least that large. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor wheel offset is +55 mm.
Wheels are sold without lug nuts (Enkei's page does not list any with this wheel). The Ranger Raptor uses M12x1.5 lug studs, so order matching lug nuts separately.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The Enkei Trail-Finder is a six-spoke truck wheel that Enkei builds for adventure driving without giving up everyday style. This is the 17x9 version in matte bronze, drilled 6x139.7 with a 0 mm offset, and Enkei lists the Trail-Finder as Spec-E inspected.
Built for trails and daily driving. Enkei describes the Trail-Finder as a rugged six-spoke wheel that blends off-road durability with a modern, sporty look.
Spec-E testing. Enkei engineered its own Spec-E test standard, which is tougher than the JWL standard: the impact test uses a higher drop point and the rotary bending and dynamic radial fatigue tests run 20% more cycles.
Matched by bolt pattern and center bore. The 6x139.7 (6x5.5 in) pattern is the Ranger Raptor pattern, and the 106.1 mm center bore is larger than the Ranger Raptor hub, so hub-centric rings are needed to center the wheel on the hub.
Features
- 17x9 size, 6x139.7 bolt pattern, 0 mm offset
- 106.1 mm center bore (use hub-centric rings on the Ranger Raptor hub)
- Matte bronze finish
- Six-spoke design
- Spec-E inspected by Enkei
Fitment: Enkei publishes this wheel as 17x9, 6x139.7, inset 0 on its Trail-Finder page and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor because Ford's Ranger Raptor uses a 6x139.7 bolt pattern and a 93.1 mm hub, and this wheel's bore is at least that large. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor wheel offset is +55 mm.
Wheels are sold without lug nuts (Enkei's page does not list any with this wheel). The Ranger Raptor uses M12x1.5 lug studs, so order matching lug nuts separately.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The Enkei Trail-Finder is a six-spoke truck wheel that Enkei builds for adventure driving without giving up everyday style. This is the 17x9 version in matte black, drilled 6x139.7 with a 0 mm offset, and Enkei lists the Trail-Finder as Spec-E inspected.
Built for trails and daily driving. Enkei describes the Trail-Finder as a rugged six-spoke wheel that blends off-road durability with a modern, sporty look.
Spec-E testing. Enkei engineered its own Spec-E test standard, which is tougher than the JWL standard: the impact test uses a higher drop point and the rotary bending and dynamic radial fatigue tests run 20% more cycles.
Matched by bolt pattern and center bore. The 6x139.7 (6x5.5 in) pattern is the Ranger Raptor pattern, and the 106.1 mm center bore is larger than the Ranger Raptor hub, so hub-centric rings are needed to center the wheel on the hub.
Features
- 17x9 size, 6x139.7 bolt pattern, 0 mm offset
- 106.1 mm center bore (use hub-centric rings on the Ranger Raptor hub)
- Matte black finish
- Six-spoke design
- Spec-E inspected by Enkei
Fitment: Enkei publishes this wheel as 17x9, 6x139.7, inset 0 on its Trail-Finder page and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor because Ford's Ranger Raptor uses a 6x139.7 bolt pattern and a 93.1 mm hub, and this wheel's bore is at least that large. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor wheel offset is +55 mm.
Wheels are sold without lug nuts (Enkei's page does not list any with this wheel). The Ranger Raptor uses M12x1.5 lug studs, so order matching lug nuts separately.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The Enkei Trail-Finder is a six-spoke truck wheel that Enkei builds for adventure driving without giving up everyday style. This is the 20x9 version in matte black, drilled 6x135 with a +20 mm offset, and Enkei lists the Trail-Finder line as Spec-E inspected.
Built for trails and daily driving. Enkei describes the Trail-Finder as a rugged six-spoke wheel that blends off-road durability with a modern, sporty look.
Spec-E testing. Enkei engineered its own Spec-E test standard, which is tougher than the JWL standard: the impact test uses a higher drop point and the rotary bending and dynamic radial fatigue tests run 20% more cycles.
Matched by bolt pattern and center bore. The 6x135 pattern is the pattern used by the F-150 Raptor, F-150 Raptor R and Bronco Raptor, and the 87.1 mm center bore matches the 87.1 mm Ford hub, so no hub-centric rings are needed.
Features
- 20x9 size, 6x135 bolt pattern, +20 mm offset
- 87.1 mm center bore
- Matte black finish
- Six-spoke design
- Spec-E inspected line
Fitment: Enkei's Trail-Finder page names no vehicles, and its size table lists 6x135 only in 17x9 and 18x9 (the 20x9 appears there as 6x139.7). It is listed for the 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R and 2022-2026 Bronco Raptor because those trucks use a 6x135 bolt pattern and an 87.1 mm hub, and this wheel's bore matches it. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs. It is not listed for the 2010-2014 SVT Raptor because Enkei names no vehicles.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on these trucks is about +34 mm.
Wheels are sold without lug nuts (Enkei's page does not list any with this wheel). The F-150 Raptor (2017 and newer), Raptor R and Bronco Raptor use M14x1.5 lug studs, so order matching lug nuts separately.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
The Enkei Trail-Finder is a six-spoke truck wheel that Enkei builds for adventure driving without giving up everyday style. This is the 20x9 version in matte black, drilled 6x139.7 with a +39 mm offset, and Enkei lists the Trail-Finder as Spec-E inspected.
Built for trails and daily driving. Enkei describes the Trail-Finder as a rugged six-spoke wheel that blends off-road durability with a modern, sporty look.
Spec-E testing. Enkei engineered its own Spec-E test standard, which is tougher than the JWL standard: the impact test uses a higher drop point and the rotary bending and dynamic radial fatigue tests run 20% more cycles.
Matched by bolt pattern and center bore. The 6x139.7 (6x5.5 in) pattern is the Ranger Raptor pattern, and the 106.1 mm center bore is larger than the Ranger Raptor hub, so hub-centric rings are needed to center the wheel on the hub.
Features
- 20x9 size, 6x139.7 bolt pattern, +39 mm offset
- 106.1 mm center bore (use hub-centric rings on the Ranger Raptor hub)
- Matte black finish
- Six-spoke design
- Spec-E inspected by Enkei
Fitment: Enkei publishes this wheel as 20x9, 6x139.7, inset 39 on its Trail-Finder page and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor because Ford's Ranger Raptor uses a 6x139.7 bolt pattern and a 93.1 mm hub, and this wheel's bore is at least that large. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor wheel offset is +55 mm.
Wheels are sold without lug nuts (Enkei's page does not list any with this wheel). The Ranger Raptor uses M12x1.5 lug studs, so order matching lug nuts separately.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The Enkei Trail-Finder is a six-spoke truck wheel that Enkei builds for adventure driving without giving up everyday style. This is the 20x9 version in matte black, drilled 6x139.7 with a +20 mm offset, and Enkei lists the Trail-Finder as Spec-E inspected.
Built for trails and daily driving. Enkei describes the Trail-Finder as a rugged six-spoke wheel that blends off-road durability with a modern, sporty look.
Spec-E testing. Enkei engineered its own Spec-E test standard, which is tougher than the JWL standard: the impact test uses a higher drop point and the rotary bending and dynamic radial fatigue tests run 20% more cycles.
Matched by bolt pattern and center bore. The 6x139.7 (6x5.5 in) pattern is the Ranger Raptor pattern, and the 106.1 mm center bore is larger than the Ranger Raptor hub, so hub-centric rings are needed to center the wheel on the hub.
Features
- 20x9 size, 6x139.7 bolt pattern, +20 mm offset
- 106.1 mm center bore (use hub-centric rings on the Ranger Raptor hub)
- Matte black finish
- Six-spoke design
- Spec-E inspected by Enkei
Fitment: Enkei publishes this wheel as 20x9, 6x139.7, inset 20 on its Trail-Finder page and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor because Ford's Ranger Raptor uses a 6x139.7 bolt pattern and a 93.1 mm hub, and this wheel's bore is at least that large. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor wheel offset is +55 mm.
Wheels are sold without lug nuts (Enkei's page does not list any with this wheel). The Ranger Raptor uses M12x1.5 lug studs, so order matching lug nuts separately.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$337.00
The Enkei Cyclone is a six-spoke truck wheel that Enkei positions as a follow-up to its RPT1, aimed at overlanders and weekend trail trucks. This is the 17x9 size, drilled 6x139.7 with a 0 mm offset, in matte gunmetal.
Tough and easy to clean. Enkei describes the Cyclone's ultra-clean design and super concave spokes as exactly what a truck wheel should be: tough, durable and easy to clean.
MAT construction. Enkei builds the Cyclone with its MAT (Most Advanced Technology) process, which combines one-piece cast wheel technology with a rim-forming (spinning) process to make a wheel that is both lightweight and strong.
Spec-E testing. Enkei engineered its own Spec-E test standard, which is tougher than the JWL standard: the impact test uses a higher drop point and the rotary bending and dynamic radial fatigue tests run 20% more cycles.
Matched by bolt pattern and center bore. The 6x139.7 (6x5.5 in) pattern is the Ranger Raptor pattern, and the 106.1 mm center bore is larger than the Ranger Raptor hub, so hub-centric rings are needed to center the wheel on the hub.
Features
- 17x9 size, 6x139.7 bolt pattern, 0 mm offset
- 106.1 mm center bore (use hub-centric rings on the Ranger Raptor hub)
- Matte gunmetal finish
- Super concave six-spoke design
- MAT construction and Spec-E inspected by Enkei
Fitment: Enkei lists the Cyclone 17x9, 6x139.7, inset 0 on its Cyclone page and does not name a Ranger Raptor. It is listed for the 2024-2026 Ford Ranger Raptor because Ford's Ranger Raptor uses a 6x139.7 bolt pattern and a 93.1 mm hub, and this wheel's bore is at least that large. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor wheel offset is +55 mm.
Wheels are sold without lug nuts (Enkei's page does not list any with this wheel). The Ranger Raptor uses M12x1.5 lug studs, so order matching lug nuts separately.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The Enkei RPT1 is the truck and SUV version of Enkei's RPF1 racing wheel. It keeps the clean split-spoke design, and Enkei says it is built to higher loading capacities to suit 6-lug trucks and SUVs. This is the 18x9 size, drilled 6x139.7 with a +0 offset, in matte dark gunmetal.
Truck-ready split-spoke design. Enkei says the RPT1 carries the RPF1 look to trucks and SUVs, and calls it one of the lightest and toughest truck wheels on the market.
MAT construction. Enkei builds the RPT1 with its MAT (Most Advanced Technology) process, which combines one-piece cast wheel technology with a rim-forming (spinning) process.
Spec-E testing. Enkei engineered its own Spec-E test standard, which is tougher than the JWL standard: the impact test uses a higher drop point and the rotary bending and dynamic radial fatigue tests run 20% more cycles.
Matched by bolt pattern and center bore. The 6x139.7 (6x5.5 in) pattern is the Ranger Raptor pattern, and the 106.1 mm center bore is larger than the Ranger Raptor hub, so hub-centric rings are needed to center the wheel on the hub.
Features
- 18x9 size, 6x139.7 bolt pattern, +0 offset
- 106.1 mm center bore (use hub-centric rings on the Ranger Raptor hub)
- Matte dark gunmetal finish
- Split-spoke design from the RPF1
- MAT construction and Spec-E inspected by Enkei
Fitment: Enkei lists the RPT1 18x9, 6x139.7, inset 0 on its RPT1 page and does not name a Ranger Raptor. It is listed for the 2024-2026 Ford Ranger Raptor because Ford's Ranger Raptor uses a 6x139.7 bolt pattern and a 93.1 mm hub, and this wheel's bore is at least that large. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor wheel offset is +55 mm.
Wheels are sold without lug nuts (Enkei's page does not list any with this wheel). The Ranger Raptor uses M12x1.5 lug studs, so order matching lug nuts separately.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The Enkei RPT1 is the truck and SUV version of Enkei's RPF1 racing wheel. It keeps the clean split-spoke design, and Enkei says it is built to higher loading capacities to suit 6-lug trucks and SUVs. This is the 17x9 size, drilled 6x135 with a +12 mm offset, in matte dark gunmetal.
Truck-ready split-spoke design. Enkei says the RPT1 carries the RPF1 look to trucks and SUVs, and calls it one of the lightest and toughest truck wheels on the market.
MAT construction. Enkei builds the RPT1 with its MAT (Most Advanced Technology) process, which combines one-piece cast wheel technology with a rim-forming (spinning) process.
Spec-E testing. Enkei engineered its own Spec-E test standard, which is tougher than the JWL standard: the impact test uses a higher drop point and the rotary bending and dynamic radial fatigue tests run 20% more cycles.
Matched by bolt pattern and center bore. The 6x135 pattern is the pattern used by the F-150 Raptor, F-150 Raptor R and Bronco Raptor, and the 87.1 mm center bore matches the 87.1 mm Ford hub, so no hub-centric rings are needed.
Features
- 17x9 size, 6x135 bolt pattern, +12 mm offset
- 87.1 mm center bore
- Matte dark gunmetal finish
- Split-spoke design from the RPF1
- MAT construction and Spec-E inspected by Enkei
Fitment: Enkei lists the RPT1 17x9, inset 12 as a 6x135 size marked Raptor on its RPT1 page. It is listed here for the 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R and 2022-2026 Bronco Raptor because those trucks use a 6x135 bolt pattern and an 87.1 mm hub, and this wheel's bore matches it. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs. It is not listed for the 2010-2014 SVT Raptor because Enkei names no model years.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on these trucks is about +34 mm.
Wheels are sold without lug nuts (Enkei's page does not list any with this wheel). The F-150 Raptor (2017 and newer), Raptor R and Bronco Raptor use M14x1.5 lug studs, so order matching lug nuts separately.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.