Welcome to RaptorsOnly.com
-
Brands
Shop by brand
- 3D MAXpider
- Access
- Addictive Desert Designs
- Advan
- AEM Induction
- aFe
- Air Lift
- Airaid
- Alcon
- AlphaRex
- AMP Research
- AMS
- Anderson Composites
- ANZO
- ARB
- Atturo Tire
- AutoMeter
- AVS
- AWE Tuning
- BackRack
- Baer Brakes
- Baja Designs
- BAK
- Banks Power
- BBK
- BBS
- BD Diesel
- Belltech
- Bestop
- BFGoodrich
- BMC
- Body Armor 4x4
- Borla
- Brembo
- Brembo OE
- Bully Dog
- Bushwacker
- Camburg
- Clevite
- COBB
- Cometic Gasket
- COMP Cams
- CORSA Performance
- Covercraft
- CSF
- DBA
- DeatschWerks
- DFC
- Diode Dynamics
- DS18
- DV8 Offroad
- Eaton
- EBC
- Eibach
- Enkei
- Extang
- Fabtech
- Fel-Pro
- fifteen52
- Firestone
- Flowmaster
- Ford Racing
- Forgestar
- FORM Lighting
- FOX
- Garrett
- Gates
- GEN-Y Hitch
- Go Fast Bits
- Go Rhino
- Gram Lights
- Granatelli Motor Sports
- GSC Power Division
- Hawk Performance
- Hella
- Hellwig
- Hotchkis
- Husky Liners
- ICON
- Injen
- J&L
- JBA
- JLT
- K&N Engineering
- KC HiLiTES
- King Engine Bearings
- King Shocks
- Kleinn Air Horns
- Kooks Headers
- KYB
- LIQUI MOLY
- LUND
- Magnaflow
- Mahle OE
- Maxtrac
- Mayhem
- MBRP
- McGard
- Method Wheels
- MGP
- Michelin
- Mickey Thompson
- Mishimoto
- Moog
- Motul
- MTX Wheels
- N-Fab
- Nacho Offroad Technology
- NGK
- Nitrous Express
- Odyssey Battery
- ORACLE Lighting
- PowerStop
- Putco
- QA1
- Raceline
- Radium Engineering
- Rally Armor
- Rampage
- Raxiom
- Retrax
- Rhino-Rack
- Ridetech
- Rigid Industries
- Rival 4x4
- RockJock
- Roll-N-Lock
- Roush
- Royal Purple
- SCT Performance
- Skyjacker
- Snow Performance
- SPC Performance
- SPOD
- Stainless Works
- Superlift
- Superpro
- Timbren
- Torque Solution
- TOYO
- Truxedo
- Tuff Country
- Turbosmart
- UMI Performance
- Undercover
- Volant
- Vossen
- Wagner Tuning
- WeatherTech
- Weld
- Westin
- Whiteline
- Wilwood
- Yokohama Tire
- Yukon Gear & Axle
- Zone Offroad
No brands found. Try another name or initial.
156 brands
View all brands -
F-150 Raptor
- F-150 Raptor
-
1st Gen (2010-2014)
-
2nd Gen (2017-2020)
-
3rd Gen (2021-Present)
-
Raptor R (2023-Present)
-
Bronco Raptor
- Bronco Raptor
-
Suspension
-
Lighting
-
Bumpers & Armor
-
Racks
-
Interior Accessories
-
Exterior Accessories
-
Performance
-
Wheels & Tires
-
Brakes
-
Drivetrain
-
Engine & Cooling
-
Ranger Raptor
- Ranger Raptor
-
Suspension
-
Lighting
-
Bumpers & Armor
-
Racks
-
Interior Accessories
-
Exterior Accessories
-
Performance
-
Wheels & Tires
-
Brakes
-
Drivetrain
-
Engine & Cooling
Your cart
Subheading
Product comparison
Describe you product comparison grid
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
F-150 Raptor R
Choose a department to narrow the parts below.
Suspension
Lighting
Bumpers & Armor
Racks
Interior Accessories
Exterior Accessories
Performance
Wheels & Tires
Brakes
Drivetrain
Engine & Cooling
42 products
42 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
The COBB Coolant Overflow Cover hides the plain factory coolant reservoir under the hood of the Ford F-150 and replaces it with a clean, black powder-coated cover. It is a simple way to tidy up an engine bay, and it was designed to fit the F-150 Raptor along with 2.7L and 3.5L EcoBoost trucks.
Cleans up the engine bay. COBB's own take is that Ford builds great engines but unattractive coolant reservoir tanks. This cover disguises the stock reservoir so the engine bay looks as sharp as the outside of your truck.
Built to handle Raptor use. The cover is fabricated from 5052-H32 aluminum with seamless welds and finished in wrinkle-black powder coat for durability. A laser-etched COBB logo adds a finished look.
Designed around Ford part FL3Z-8A080-A. COBB designed the cover to be compatible with this Ford coolant overflow reservoir part number. It does not fit PowerBoost Hybrid models.
Features
- 5052-H32 aluminum construction
- Seamless welds
- Wrinkle-black powder coat for durability
- Laser-etched COBB logo
- Designed for Ford coolant overflow reservoir FL3Z-8A080-A
Emissions: COBB states this is not an emissions-related part and can be used on emission-controlled vehicles.
Fitment: 2017-2026 Ford F-150 Raptor, 2023-2026 Raptor R, 2021-2026 Tremor, 2019-2020 Limited, 2.7L and 3.5L engines, and 2021-2023 5.0L, plus the Ford Expedition and Lincoln Navigator (2018-2026). Does not fit PowerBoost Hybrid models. Fitment confirmed against COBB's published application list.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2021-2026 | Ford | F-150 | Tremor |
| 2019-2020 | Ford | F-150 | Limited |
| 2018-2026 | Ford | F-150 | 2.7L |
| 2017-2026 | Ford | F-150 | 3.5L |
| 2021-2023 | Ford | F-150 | 5.0L |
| 2018-2026 | Ford | Expedition | |
| 2018-2026 | Lincoln | Navigator |
$399.00
The CSF 8102 is a high-performance transmission oil cooler for the 2017-2026 Ford F-150 Raptor, including the 2023-2026 Raptor R. It swaps the factory front-mounted cooler for a larger one, so the transmission stays cooler under towing, heat and hard driving.
Cooler fluid, bigger core. The core measures 3.7 by 29.2 inches with 7 tubes and 8 fin rows. CSF says it is about 40 percent larger than the original cooler, and the tube and fin assembly is robot welded for consistency.
Check your cooler first. Not every F-150 has a front-mounted transmission cooler. CSF notes that you need the Ford OE cooler FL3Z-7A095-A or HL3Z-7A095-A. Trucks with the ML3Z-7869-C part will not fit without modification.
Quick installation. CSF estimates installation at under 30 minutes. Two install photos are included on CSF's page.
Features
- 3.7 x 29.2 inch core, about 40% larger than OEM
- 7 tubes with 8 fin rows
- Robot-welded tube and fin construction
- Fits Raptor 3.5L EcoBoost (2017-2026) and Raptor / Raptor R 5.2L supercharged (2023-2026)
- 2-year CSF warranty
Fitment: 2017-2020 and 2021-2026 F-150 Raptor 3.5L EcoBoost, and 2023-2026 Raptor and Raptor R 5.2L supercharged, plus the other F-150 applications listed below. Fitment confirmed against CSF's published application list.
Guides & Manuals
CSF WarrantyThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor 3.5L turbo |
| 2021-2026 | Ford | F-150 | Raptor 3.5L turbo |
| 2023-2026 | Ford | F-150 | Raptor 5.2L supercharged |
| 2023-2026 | Ford | F-150 | Raptor R 5.2L supercharged |
| 2015-2026 | Ford | F-150 | 2.7L turbo, 3.5L, 3.5L turbo, 5.0L (see CSF fitment notes) |
$69.00
The JLT JLTCTC-F150-15 is a black textured coolant tank cover for the Ford F-150 Raptor with the 3.5L EcoBoost and the 2023-2026 Raptor R with the 5.2L supercharged V8. It replaces the plain factory cover over the coolant reservoir with a clean, textured finish that tidies up the engine bay. JLT is an S&B Filters brand.
A cleaner look. The cover installs in place of the stock cover and gives the engine bay a finished, matching appearance with the other black accessories.
Direct fit. It is a direct-fit part for the F-150 with the 2.7L, 3.5L EcoBoost and 5.0L, and for the Raptor and Raptor R listed below.
Features
- Black textured finish
- Direct-fit replacement for the factory coolant tank cover
- Covers the F-150 Raptor and Raptor R
Fitment: 2017-2026 Ford F-150 Raptor 3.5L EcoBoost and the 2023-2026 F-150 Raptor R 5.2L with the stock supercharger, plus the other F-150 applications below. Fitment confirmed against S&B Filters' published application list for JLT.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor 3.5L EcoBoost |
| 2023-2026 | Ford | F-150 | Raptor R 5.2L supercharged |
| 2015-2026 | Ford | F-150 | 2.7L EcoBoost, 3.5L EcoBoost, 5.0L |
EBC Yellowstuff front brake pads are a high-friction, aramid-fibre street and track pad set made for the factory front calipers on late-model Ford Raptors. This set fits the 2021-2025 F-150 Raptor, the 2023-2026 F-150 Raptor R and the 2022-2026 Bronco Raptor, and gives you more bite than a stock-style pad without giving up everyday drivability.
Strong stopping from the first touch. Yellowstuff is built to work cold. You do not need to warm the pads before they bite, and they keep gaining strength as heat builds during hard driving, which suits a Raptor that sees fast road miles, desert runs or track days.
Faster, cleaner bed-in. A red Brake-In surface coating helps the pads bed quickly after installation. EBC says full bedding can take 300 to 500 miles, depending on the condition of the rotors.
Heat stability and fade resistance. The race-developed compound is stable up to 400 degrees C (750 degrees F), the normal street maximum, and EBC rates it for zero fade at that level. Better high-speed stopping is a core goal of the compound.
A solid pad-to-backing bond. The pads use NUCAP NRS backing plates for strong pad bond strength and retention, so the friction material stays put under load.
What to expect. Yellowstuff is a performance pad, not a low-dust pad. If low dust is your priority for a daily driver, EBC points to its Redstuff line instead. For regular track driving, EBC suggests stepping up to its Bluestuff or RP and SR series.
- Brand: EBC Brakes, front disc brake pad set (aramid fibre pad material)
- Works effectively right from cold; high-friction compound; better high-speed stopping
- Race-developed zero-fade compound for street and track use
- Red Brake-In surface coating for fast initial bedding
- NUCAP NRS backing plates for pad bond strength and retention
- Stable to 400 degrees C / 750 degrees F
- N-rated (Leaf Mark) for environmental safety; ECE R90 approved
- FMSI pad number D2382; fits 350 mm front vented rotors per BuyBrakes' listing for these trucks
- Pad outline per EBC drawing: 192 x 67.4 x 16 mm
- Backed by a 1-year or 10,000-mile warranty (per BuyBrakes)
Fitment: Ford F-150 Raptor 2021-2025, F-150 Raptor R 2023-2026 and Bronco Raptor 2022-2026, plus other 2021-2026 F-150 engines, 2022-2024 and 2026 Expedition and 2022-2024 Lincoln Navigator as listed below. Fitment confirmed against EBC's published application list (EBC part finder).
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R (5.2L) |
| 2022-2026 | Ford | Bronco | Raptor (3.0L) |
| 2021-2026 | Ford | F-150 | 2.7L, 3.0L, 3.5L, 5.0L (336 mm or 350 mm rear discs) |
| 2021-2023 | Ford | F-150 | 3.3L (336 mm or 350 mm rear discs) |
| 2022-2024, 2026 | Ford | Expedition | 3.5L |
| 2022-2024 | Lincoln | Navigator | 3.5L |
EBC Extra Duty front brake pads are a heavy-duty, low-dust pad set built for the factory front calipers on late-model Ford Raptors. This set fits the 2021-2023 F-150 Raptor, the 2023-2026 F-150 Raptor R and the 2022-2026 Bronco Raptor, and is made for trucks that tow, carry weight and run big tires.
Strong bite from cold. EBC developed the Extra Duty compound to give unusually high friction while staying well mannered on the street. Braking is strong from the first application, and EBC reports winter testing on a fleet of five popular light trucks in Ohio, where the pads stopped well in wet, cold conditions in which many performance pads struggle.
Built for heat. The race-bred material is rated for effective stopping at temperatures above 1,400 degrees F, well beyond what heavy braking, towing or long downhill descents normally produce.
Easy on rotors and ears. The carbon-granule-based Extra Duty material is rotor friendly, low in dust and quiet in use.
Shims included. Each set is supplied with NUCAP piston insert shims, which help the pads sit and move cleanly in the caliper.
- EBC Extra Duty (ED Plus series) front pad set; the pads are red
- Carbon-granule friction material with strong cold bite
- Effective above 1,400 degrees F
- Rotor friendly, low dust, quiet
- NUCAP piston insert shims supplied with every set
- Pad outline per EBC drawing: 192 x 67.4 x 16 mm
- Suited to extreme and fleet duty, towing with oversized tires, performance street and street-and-track use (per BuyBrakes)
Fitment: Ford F-150 Raptor 2021-2023, F-150 Raptor R 2023-2026 and Bronco Raptor 2022-2026, plus other 2021-2026 F-150 engines, 2022-2024 and 2026 Expedition and 2022-2024 Lincoln Navigator as listed below. Fitment confirmed against EBC's published application list (EBC part finder).
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2023 | Ford | F-150 | Raptor (3.5L) |
| 2023-2026 | Ford | F-150 | Raptor R (5.2L) |
| 2022-2026 | Ford | Bronco | Raptor (3.0L) |
| 2021-2026 | Ford | F-150 | 2.7L, 3.0L, 3.5L, 5.0L (336 mm or 350 mm rear discs) |
| 2021-2023 | Ford | F-150 | 3.3L (336 mm or 350 mm rear discs) |
| 2022-2024, 2026 | Ford | Expedition | 3.5L |
| 2022-2024 | Lincoln | Navigator | 3.5L |
This EBC Stage 15 kit pairs EBC Extra Duty pads with USR slotted rotors for the front brakes of the 2021-2023 Ford F-150 Raptor, the 2023-2026 F-150 Raptor R and the 2022-2026 Bronco Raptor. It is built for trucks that tow, haul and run big tires, and it arrives as one matched pad-and-rotor set.
Extra Duty pads for hard use. EBC developed the Extra Duty compound for unusually high friction that still behaves well on the street. Braking is strong from the first application, and the race-bred carbon-granule-based material is rated for effective stopping above 1,400 degrees F, well beyond what heavy braking, towing or long downhill descents normally produce. EBC describes it as rotor friendly and quiet.
Fine-slotted USR sport rotors. The rotors are USR fine-slotted G3000 sport rotors finished with a Geomet anti-rust coating, fully balanced and run-out tested for smooth braking. Front rotor: vented, 350 mm diameter, 34 mm thick (per BuyBrakes' listing); FMSI pad number D2382.
Steady under load. The kit is described as holding a stable friction coefficient under load and frequent snubbing, which suits towing and off-road driving. Expect more dust than a standard pad.
- EBC Extra Duty pads with USR fine-slotted G3000 sport rotors
- Stable friction under load and frequent snubbing; suited to towing and off-roading
- Effective above 1,400 degrees F
- Geomet anti-rust coating on the rotors
- Suited to extreme and fleet duty and towing with oversized tires (per BuyBrakes)
- Pad outline per EBC drawing: 192 x 67.4 x 16 mm
Fitment: Ford F-150 Raptor 2021-2023, F-150 Raptor R 2023-2026 and Bronco Raptor 2022-2026, plus other 2021-2026 F-150 engines, 2022-2024 and 2026 Expedition and 2022-2024 Lincoln Navigator as listed below. Fitment confirmed against EBC's published application list (EBC part finder).
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2023 | Ford | F-150 | Raptor (3.5L) |
| 2023-2026 | Ford | F-150 | Raptor R (5.2L) |
| 2022-2026 | Ford | Bronco | Raptor (3.0L) |
| 2021-2026 | Ford | F-150 | 2.7L, 3.0L, 3.5L, 5.0L (336 mm or 350 mm rear discs) |
| 2021-2023 | Ford | F-150 | 3.3L (336 mm or 350 mm rear discs) |
| 2022-2024, 2026 | Ford | Expedition | 3.5L |
| 2022-2024 | Lincoln | Navigator | 3.5L |
This EBC Stage 9 kit pairs Yellowstuff 4000 series pads with USR fine-slotted rotors for the front brakes of the 2021-2023 Ford F-150 Raptor, the 2023-2026 F-150 Raptor R and the 2022-2026 Bronco Raptor. It is EBC's most aggressive street-and-track kit in this family, supplied as one matched set for drivers who want more bite and better heat handling than a standard setup.
Matched pads and rotors. Yellowstuff is an aramid-fiber compound that works from cold and self-seats after installation thanks to its Brake-In surface coating. EBC's high-friction formula is described as improving braking by up to 40% over OE. The pad has a slotted face for cooling and for collecting dust and debris. The pad outline drawing lists a front pad roughly 192 mm long, 67.4 mm tall and 16 mm thick.
Rotors built for heat. The USR fine-slotted rotors expel gas, dust, debris and moisture more efficiently than a plain rotor, and they are rated to run at up to 800-900 degrees centigrade. A corrosion-resistant silver-gray coating extends service life, and each rotor is inspected and balanced for smooth running. BuyBrakes notes the kit has the thermal capacity for heavy vehicles and loads up to 8,000 pounds.
Right for the job. BuyBrakes lists the kit for performance street driving, street and track events and towing with oversized tires. It is a performance setup, so expect more brake dust than a standard pad.
- Yellowstuff 4000 series high-friction aramid-fiber pads
- Brake-In coating for fast bed-in
- USR fine-slotted vented rotors with corrosion-resistant coating
- Rotors inspected for runout and balanced
- Front axle kit: pads and rotors supplied together
Fitment: Ford F-150 Raptor 2021-2023 (3.5L), Ford F-150 Raptor R 2023-2026 (5.2L) and Ford Bronco Raptor 2022-2026 (3.0L), plus other Ford F-150 2021-2026 (2.7L, 3.0L, 3.5L, 5.0L, and 3.3L for 2021-2023; EBC notes 336 mm or 350 mm rear), Ford Expedition 2022-2024 and 2026 (3.5L) and Lincoln Navigator 2022-2024 (3.5L), as listed below. Fitment confirmed against EBC's published application list.
Guides & Manuals
Installation InstructionsWarranty Information
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2023 | Ford | F-150 | Raptor (3.5L) |
| 2023-2026 | Ford | F-150 | Raptor R (5.2L) |
| 2022-2026 | Ford | Bronco | Raptor (3.0L) |
| 2021-2026 | Ford | F-150 | 2.7L, 3.0L, 3.5L, 5.0L (336 mm or 350 mm rear) |
| 2021-2023 | Ford | F-150 | 3.3L (336 mm or 350 mm rear) |
| 2022-2024 | Ford | Expedition | 3.5L |
| 2026 | Ford | Expedition | 3.5L |
| 2022-2024 | Lincoln | Navigator | 3.5L |
These EBC USR Ultimax slotted front rotors are a direct upgrade for the front brakes of the Ford F-150 Raptor, F-150 Raptor R and Bronco Raptor. They are sold as a 2-wheel set (a pair), and they keep the everyday driveability of a stock rotor while adding extra bite when you pair them with a high-friction pad.
Narrow multi-slot design. EBC's slotted rotors use many narrow slots that help keep dirt, debris, water and brake dust away from the pads. That keeps more of the pad in contact with the rotor for better grip, and, unlike drilled rotors, slotted rotors promote flat, parallel pad wear instead of letting ridges form on the pads and rotors.
Quality iron, made in the UK. The rotors are cast from GS3000 grey iron, chosen for its friction coefficient, thermal stability and heat transfer, and are precision machined in the UK. They carry a protective coating. Per BuyBrakes' listing, the front rotor is 350 mm in diameter and 34 mm thick.
Right for the job. EBC recommends its slotted rotors for towing, hauling, track use and sport driving. Installation and break-in should be done by a certified mechanic, as EBC advises.
- USR Ultimax slotted vented front rotors, sold as a 2-wheel set
- Narrow multi-slot design to clear debris, water and dust
- GS3000 grey iron, precision machined in the UK
- 350 mm diameter, 34 mm thick (per BuyBrakes' listing)
- Protective rotor coating
Fitment: Ford F-150 Raptor 2021-2023 (3.5L), F-150 Raptor R 2023-2026 (5.2L) and Bronco Raptor 2022-2026 (3.0L), plus other 2021-2026 F-150, 2022-2026 Expedition and 2022-2024 Navigator as listed below. Fitment confirmed against EBC's published application list (EBC part finder).
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2023 | Ford | F-150 | Raptor (3.5L) |
| 2023-2026 | Ford | F-150 | Raptor R (5.2L) |
| 2022-2026 | Ford | Bronco | Raptor (3.0L) |
| 2021-2026 | Ford | F-150 | 2.7L, 3.0L, 3.5L, 5.0L (3.3L 2021-2023 only) |
| 2022-2024, 2026 | Ford | Expedition | 3.5L |
| 2022-2024 | Lincoln | Navigator | 3.5L |
These Borla 3 in. tail pipes replace the factory tail pipes on the 2021-2026 Ford F-150 Raptor and the 2023-2026 F-150 Raptor R. Each pipe finishes in a single 4.5 in. round black chrome tip on T-304 stainless steel, which gives the rear of the truck a dark, understated look.
Louder than the factory resonated pipes. When these pipes replace original tail pipes that have resonators or resonated tips, the sound level increases. Borla's mandrel bends keep the exhaust path smooth, so the added volume comes with strong flow.
Built to last. The pipes are T-304 stainless steel, which Borla rates above T-400 series grades such as 409 for performance and durability. CNC manufacturing keeps the fit accurate, heat shields are included on the pipes, and Borla backs each tail pipe with its Million-Mile Warranty.
Care for the black chrome tips. Borla does not recommend its Stainless Steel Polish (21499) on black chrome. Clean the tips with hot water and a microfiber cloth instead.
Choose your mid-section. The tail pipes fit with Borla mid-section / muffler assemblies 60728, 60736 or 60737, or with the original mid-section / muffler assembly.
Features
- Pipe diameter: 3 in. T-304 stainless steel
- Tips: single 4.5 in. round black chrome on T-304 stainless
- Tip exit: truck single split rear exit
- Heat shields included on the pipes
- Fits with Borla 60728, 60736 or 60737 mid-sections, or the O.E. mid-section
- Brawler-style black coated tips and carbon fiber tips are also offered by Borla
Prop 65 warning: operations such as welding or cutting on this product may expose you to chemicals including chromium, nickel, cobalt, arsenic, cadmium and lead, which are known to the State of California to cause cancer, birth defects and other reproductive harm.
Fitment: 2021-2026 Ford F-150 Raptor with the 3.5L V6 and 2023-2026 F-150 Raptor R with the 5.2L V8, automatic transmission, 2WD and 4WD, crew cab with the 5 ft 6 in. short bed (145.4 in. wheelbase). Fitment confirmed against Borla's published application list.
Guides & Manuals
Installation InstructionsInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor 3.5L V6, crew cab short bed |
| 2023-2026 | Ford | F-150 | Raptor R 5.2L V8, crew cab short bed |
Borla's 3 in. tail pipe kit with Brawler-style tips is made for the 2021-2026 Ford F-150 Raptor and the 2023-2026 F-150 Raptor R. The standout is the single 5 in. round angle-cut tip on each pipe, finished in a durable high-temperature black coating over T-304 stainless steel, with the Borla logo laser cut into the bottom wall of the tip.
A bold, angle-cut tip. Borla describes this as a unique Brawler style tip, and the 5 in. diameter with its angle cut sets this kit apart from the black chrome and carbon fiber versions of the same tail pipe.
Sound level goes up. Where these pipes replace original tail pipes with resonators or resonated tips, expect a louder exhaust. Ultra-smooth mandrel bends keep the flow path clean.
Stainless where it counts. The pipes are T-304 stainless steel, which Borla rates above T-400 series grades such as 409 for performance and durability. Heat shields are included on the pipes, CNC manufacturing keeps the fit accurate, and the Million-Mile Warranty covers each tail pipe.
Works with your exhaust. Pair the tail pipes with Borla mid-section / muffler assemblies 60728, 60736 or 60737, or keep the original mid-section / muffler assembly.
Features
- Pipe diameter: 3 in. T-304 stainless steel
- Tips: single 5 in. round Brawler style, angle cut, high-temperature black coating
- Laser-cut Borla logo in the bottom wall of each tip
- Tip exit: truck single split rear exit
- Heat shields included on the pipes
- Fits with Borla 60728, 60736 or 60737 mid-sections, or the O.E. mid-section
- Black chrome and carbon fiber tip versions are also offered by Borla
Prop 65 warning: operations such as welding or cutting on this product may expose you to chemicals including chromium, nickel, cobalt, arsenic, cadmium and lead, which are known to the State of California to cause cancer, birth defects and other reproductive harm.
Fitment: 2021-2026 Ford F-150 Raptor with the 3.5L V6 and 2023-2026 F-150 Raptor R with the 5.2L V8, automatic transmission, 2WD and 4WD, crew cab with the 5 ft 6 in. short bed (145.4 in. wheelbase). Fitment confirmed against Borla's published application list.
Guides & Manuals
Installation InstructionsInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor 3.5L V6, crew cab short bed |
| 2023-2026 | Ford | F-150 | Raptor R 5.2L V8, crew cab short bed |
This Borla 3 in. tail pipe kit puts a carbon fiber finish on the exhaust of the 2021-2026 Ford F-150 Raptor and 2023-2026 F-150 Raptor R. Every pipe ends in a single 4.5 in. round carbon fiber tip with a black anodized center.
Carbon fiber tips. The carbon fiber tips are the feature that sets this kit apart from Borla's black chrome and Brawler versions of the same tail pipe.
Expect more volume. Replacing original tail pipes that have resonators or resonated tips raises the sound level. Ultra-smooth mandrel bends keep exhaust flow moving freely through the pipe.
Premium stainless steel. The pipes are T-304 stainless steel, which Borla rates above T-400 series grades such as 409 for performance and durability. CNC manufacturing keeps the fit accurate, heat shields are included on the pipes, and each tail pipe is covered by Borla's Million-Mile Warranty.
Choose your mid-section. The kit fits with Borla mid-section / muffler assemblies 60728, 60736 or 60737, or with the original mid-section / muffler assembly.
Features
- Pipe diameter: 3 in. T-304 stainless steel
- Tips: single 4.5 in. round carbon fiber with black anodized centers
- Tip exit: truck single split rear exit
- Heat shields included on the pipes
- Fits with Borla 60728, 60736 or 60737 mid-sections, or the O.E. mid-section
- Black chrome and Brawler-style black coated tip versions are also offered by Borla
Prop 65 warning: operations such as welding or cutting on this product may expose you to chemicals including chromium, nickel, cobalt, arsenic, cadmium and lead, which are known to the State of California to cause cancer, birth defects and other reproductive harm.
Fitment: 2021-2026 Ford F-150 Raptor with the 3.5L V6 and 2023-2026 F-150 Raptor R with the 5.2L V8, automatic transmission, 2WD and 4WD, crew cab with the 5 ft 6 in. short bed (145.4 in. wheelbase). Fitment confirmed against Borla's published application list.
Guides & Manuals
Installation InstructionsInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor 3.5L V6, crew cab short bed |
| 2023-2026 | Ford | F-150 | Raptor R 5.2L V8, crew cab short bed |
Borla built this S-Type mid-section specifically for the 2023-2026 Ford F-150 Raptor R and its 5.2L supercharged V8. The 3-inch true dual assembly replaces the factory center section and is tuned to a deep, aggressive but balanced tone without drone.
SwitchFire design. Instead of a standard X-pipe with its turbulent center intersection, Borla's patented SwitchFire layout blends the pulses from both banks of the engine, aiming for better performance and a custom sound.
Polyphonic Harmonizer. Pipes of different diameters and lengths inside the muffler create multiple notes that harmonize into a clean, full-bodied sound.
S-Type sound level. Borla describes S-Type as an aggressive yet balanced sound with a deep tone and no drone.
Valves and tail pipes. The assembly includes active exhaust valves. Pair it with the original tail pipes or Borla's tail pipes in black chrome, Brawler black coated, or carbon fiber with a black anodized center.
Materials. T-304 stainless steel, mandrel bends and CNC manufacturing, covered by a Million Mile Warranty.
Features
- 3 in. true dual mid-section / muffler assembly
- S-Type sound level
- SwitchFire and Polyphonic Harmonizer technology
- Active exhaust valves included
- Fits with OE tail pipes or Borla 60727BC, 60727CB or 60727CFBA tail pipes
California Proposition 65. Borla's page carries this notice: welding, brazing or thermal cutting on this product can expose you to chemicals including chromium, nickel, cobalt, arsenic, cadmium and lead, which are known to the State of California to cause cancer, birth defects and other reproductive harm. The product as sold presents no hazard in its finished form. More at www.P65Warnings.ca.gov.
Fitment: 2023-2026 Ford F-150 Raptor R, 5.2L supercharged V8, automatic transmission, 4WD, 4 door crew cab with 5 ft 6 in short bed, 145.4 in. wheelbase. Fitment confirmed against Borla's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2026 | Ford | F-150 | Raptor R 5.2L supercharged V8, crew cab short bed (5 ft 6 in), 145.4 in. wheelbase |
The Borla ATAK mid-section for the 2023-2026 Ford F-150 Raptor R swaps the middle of the exhaust for a 3-inch, true-dual muffler assembly made for the supercharged 5.2L V8.
Aggressive sound, no drone. ATAK is Borla's most aggressive sound level, tuned for a race-bred note that stays free of drone. Active Exhaust Valves are part of the assembly.
Polyphonic Harmonizer technology. Borla's patented units use pipes of different diameters and lengths to create several exhaust notes that harmonize into a clean, rich, full-bodied tone.
SwitchFire design. It removes the turbulent center intersection of a standard X-pipe and blends the combustion pulses from both sides of the engine, which Borla says gives improved performance and a custom sound.
T-304 stainless construction. Borla builds the system from T-304 stainless rather than 400-series grades such as 409. Ultra-smooth mandrel bends are meant to keep flow and power high, and CNC manufacturing holds the fit accurate. The system is covered by Borla's Million Mile Warranty.
Tail pipe options. This mid-section is made to run with Borla tail pipes 60727BC (black chrome on T-304 stainless), 60727CB (black coated T-304 stainless), or 60727CFBA (carbon fiber with black anodized center), or with the original equipment tail pipes.
Features
- 3 in. pipe diameter
- True Dual design
- ATAK sound level
- SwitchFire technology
- Polyphonic Harmonizer technology
- Includes Active Exhaust Valves
- T-304 stainless steel construction
- Million Mile Warranty
Fitment: 2023-2026 Ford F-150 Raptor R, 5.2L V8 supercharged, automatic transmission, 4WD, 4-door crew cab with short bed (5 ft 6 in), 145.4 in wheelbase. Fitment confirmed against Borla's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2026 | Ford | F-150 | Raptor R (5.2L V8 supercharged, 4WD, crew cab, short bed) |
The MBRP Armor Pro axle-back is a 3-inch, dual rear exit exhaust with carbon fiber tips for the Ford F-150 Raptor (2021-2027) and Raptor R (2023-2027). It is built from T304 stainless steel and covered by MBRP's lifetime warranty.
Street profile sound. This version is MBRP's street profile.
T304 stainless steel, lifetime warranty. MBRP describes T304 as the most durable material grade it offers. The tubing is easy to clean and maintain and suits trucks that operate in extreme conditions.
Mandrel-bent for flow. Smooth bends with no rippling keep exhaust gas moving, and the system installs as a bolt-on.
Carbon fiber tips included. The 5-inch OD carbon fiber tips come with the system.
Features
- 3-inch T304 stainless steel axle-back, dual rear exit
- 5-inch OD carbon fiber tips included
- Street profile sound
- Smooth mandrel-bent tubing, bolt-on installation
- Lifetime MBRP warranty
Emissions: California Proposition 65 warning applies. This is an exhaust-only part; check local rules for your area.
Fitment: 2021-2027 Ford F-150 Raptor (3.5L EcoBoost HO) and 2023-2027 Ford F-150 Raptor R (5.2L supercharged). Fitment confirmed against MBRP's published application list.
Guides & Manuals
Installation Instructions
Technical Drawing
Warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2027 | Ford | F-150 | Raptor |
| 2023-2027 | Ford | F-150 | Raptor R |
The MBRP Armor Pro axle-back is a 3-inch, dual rear exit exhaust with turndown tails, made for the Ford F-150 Raptor (2022-2027, 3.5L EcoBoost HO) and the Raptor R (2023-2027, 5.2L supercharged). It is built from T304 stainless steel and covered by MBRP's lifetime warranty.
Moderate tone. This is MBRP's street profile. The sound is described as moderate, so it adds a deeper voice without overwhelming cabin comfort.
Laser-welded turndown tails. The high-clearance tails turn downward to keep ground clearance for off-road use.
T304 stainless steel. The tubing resists corrosion and is mandrel bent with no rippling in the bends for good exhaust flow.
Bolt-on installation. The system installs as a bolt-on and includes the hardware and clamps needed.
Features
- 3-inch T304 stainless steel axle-back, dual rear exit
- Laser-welded high-clearance turndown tails
- Moderate exhaust tone, street profile
- Smooth mandrel-bent tubing, bolt-on installation
- Hardware and clamps included
- Lifetime MBRP warranty
Emissions: California Proposition 65 warning applies. This is an exhaust-only part; check local rules for your area.
Fitment: 2022-2027 Ford F-150 Raptor (3.5L EcoBoost HO) and 2023-2027 Ford F-150 Raptor R (5.2L supercharged). Fitment confirmed against MBRP's published application list.
Guides & Manuals
Installation Instructions
Warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2027 | Ford | F-150 | Raptor |
| 2023-2027 | Ford | F-150 | Raptor R |
The MBRP Armor BLK axle-back is a 3-inch, dual rear exit exhaust with black-coated turndown tails, made for the Ford F-150 Raptor (2022-2027, 3.5L EcoBoost HO) and the Raptor R (2023-2027, 5.2L supercharged). It is built from T304 stainless steel with an engineered high-heat black coating.
Black finish. The coating is a high-heat black finish. MBRP covers the black coating with a 1-year warranty against factory defects, and the rest of the system with its lifetime warranty.
Moderate tone. This is MBRP's street profile. The sound is described as moderate, so it adds a deeper voice without overwhelming cabin comfort.
Laser-welded turndown tails. The high-clearance tails turn downward to keep ground clearance for off-road use.
Bolt-on installation. Smooth mandrel-bent tubing with no rippling in the bends; the system includes the hardware and clamps needed.
Features
- 3-inch black-coated T304 stainless steel axle-back, dual rear exit
- Laser-welded high-clearance turndown tails
- Moderate exhaust tone, street profile
- Smooth mandrel-bent tubing, bolt-on installation
- Hardware and clamps included
- 1-year warranty on the finish, lifetime warranty on the rest
Emissions: California Proposition 65 warning applies. This is an exhaust-only part; check local rules for your area.
Fitment: 2022-2027 Ford F-150 Raptor (3.5L EcoBoost HO) and 2023-2027 Ford F-150 Raptor R (5.2L supercharged). Fitment confirmed against MBRP's published application list.
Guides & Manuals
Installation Instructions
Warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2027 | Ford | F-150 | Raptor |
| 2023-2027 | Ford | F-150 | Raptor R |
This Stainless Works catback replaces the factory rear exhaust on the 2021-2026 Ford F-150 Raptor (3.5L EcoBoost) and the 2023-2026 Raptor R (5.2L supercharged V8). It uses 3 inch 304 stainless piping with an X-pipe crossover and ends in dual 4 inch matte black slash-cut conical tips.
Keeps the factory valves. The system is compatible with the factory active exhaust valves, so Quiet, Normal, Sport and Baja modes keep working.
Direct bolt-on. The system bolts to the factory connection points. The pipes are mandrel bent and TIG welded, and Stainless Works builds each system to order, listing about 4 weeks.
Lifetime warranty. Stainless Works backs the system with a lifetime warranty.
What is in the kit. Lead pipes, X-pipe, two mufflers, tail pipes, hangers, 3 inch clamps, valve springs and clips, extensions, two matte black tips and installation instructions.
Features
- 3 inch 304 stainless piping with X-pipe crossover
- Dual 4 inch matte black slash-cut conical tips
- Compatible with the factory active exhaust valves
- Direct bolt-on, mandrel bent, TIG welded
- Lifetime warranty
Fitment: 2021-2026 Ford F-150 Raptor 3.5L EcoBoost and 2023-2026 Ford F-150 Raptor R 5.2L. Fitment confirmed against Stainless Works' published application list.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor 3.5L EcoBoost |
| 2023-2026 | Ford | F-150 | Raptor R 5.2L |
These Stainless Works long-tube headers are a direct bolt-on for the 2023-2026 Ford F-150 Raptor R with the 5.2L supercharged V8. They use 2 inch primaries, EPA-compliant high-flow catalytic converters and 3 inch lead pipes. Stainless Works states that they do not fit the standard Raptor.
Free-flowing design. The long-tube layout replaces the factory manifolds, and the 3 inch leads connect to the factory exhaust or to a Stainless Works catback.
Built to last. The headers are 304 stainless steel, mandrel bent and TIG welded, and backed by a lifetime warranty.
What is in the kit. Driver and passenger headers, a driver elbow, two high-flow cats, lead pipes, five band clamps, oxygen sensor extensions, a header bolt kit, RTV and installation instructions.
Features
- 2 inch primaries with 3 inch lead pipes
- EPA-compliant high-flow cats
- Direct bolt-on for the Raptor R 5.2L
- 304 stainless steel, mandrel bent, TIG welded
- Lifetime warranty
Fitment: 2023-2026 Ford F-150 Raptor R 5.2L only; not for the standard Raptor. Fitment confirmed against Stainless Works' published application list.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2026 | Ford | F-150 | Raptor R 5.2L |
aFe POWER Track Series Intake Systems, the pinnacle of innovation in open-element intakes. Designed using cutting-edge tech and crafted with premium materials, they undergo rigorous testing to ensure peak performance. Showcasing a one-piece housing that shields from elements and heat, seamlessly fitting into the engine bay. The highlight of the Track Series is its carbon fiber intake tube, meticulously CAD-designed and refined through dyno-testing. The result is a visually striking, lightweight system that delivers exceptional performance and a captivating induction sound. This 9” tall 360-degree radial flow air filter features our pre-oiled Black Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. This Track Series air filter was specially designed for the Raptor R and features a carbon fiber top. Lightweight twill weave carbon fiber tube directs the filtered air from the massive air filter to the engine. It is computer designed and dyno tested to increase air flow while reducing weight and enhancing the visual appearance of the engine bay. The tube is manufactured out of 100% carbon fiber material (No fiberglass). The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive Air Intake sound. It utilizes the vehicle's factory air inlet. The built-in air intake scoop captures cold air directly from the top of the radiator support thanks to its huge opening. Its innovative design makes for a hassle-free, direct bolt-on installation process that requires no cutting or drilling.
Installation Instructions- Housing with built-in air intake scoop to capture cold air directly from the top of radiator support
- Washable and Reusable Black Pro 5R Air Filter for Maximum Performance with Carbon Fiber Top
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Premium Stainless-Steel Clamps and Silicone Couplings Provide a Secure Seal
- Utilizes Factory Mounting Locations for an Easy and Secure Installation
- Dyno-tuned lightweight 100% carbon fiber tube
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2026 | Ford | F-150 | Raptor |
The MBRP Armor Pro Active muffler replacement is a 3-inch T304 stainless steel muffler swap made exclusively for the 2023-2027 Ford F-150 Raptor R with the 5.2L supercharged V8. It replaces the factory muffler while keeping the factory active valve working, so you can still switch between a more aggressive sound and a quieter daily-driving mode.
Keeps the factory active valve. The system retains the factory Active Valve function, so the exhaust mode switching continues to work as it did from the factory. MBRP notes that the exhaust valve may need a relearn through Ford's FDRS (the PCM Exhaust Tailpipe Actuator Position Relearn app).
More flow than the stock muffler. MBRP reports that dynamometer testing showed a 6% increase in flow over the OEM muffler. The tubing is precision CNC mandrel bent for unrestricted flow.
T304 stainless steel. The construction resists corrosion and rust, and the kit carries MBRP's lifetime warranty.
Bolt-on fit, better clearance. It uses the factory hanger locations, includes the clamps and hardware needed, and its design improves ground clearance.
Features
- 3-inch T304 stainless steel muffler replacement, active profile
- Retains factory active valve function
- Precision CNC mandrel-bent tubing
- MBRP dyno testing: 6% more flow than the OEM muffler
- Uses OEM hanger locations; installation hardware included
- Improved ground clearance
- Lifetime MBRP warranty
Emissions: California Proposition 65 warning applies. This is an exhaust-only part; check local rules for your area.
Fitment: 2023-2027 Ford F-150 Raptor R, 5.2L engine only, SuperCrew short box. MBRP lists this part exclusively for the Raptor R. Fitment confirmed against MBRP's published application list.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2027 | Ford | F-150 | Raptor R |
$1,330.00
This pair of gloss carbon fiber fender vents replaces the factory vents on your F-150 Raptor. They add a real carbon fiber look to the fenders without changing how the truck is built.
Real carbon fiber. Ford makes the vents from 3K, 2x2 twill carbon fiber cloth using an autoclave process, then finishes them in gloss.
Direct replacement. The vents replace the OE components, and the kit includes the left and right vents plus all required fasteners, hardware and installation materials.
Match the rest of the truck. The same carbon fiber is also offered in a matte finish (M-16026-FM) and as a complete gloss kit (M-16600K-FG).
Features
- Carbon fiber right and left fender vent set
- Gloss finish; 3K 2x2 twill carbon fiber
- Autoclave-produced
- Fasteners, hardware and installation materials included
Fitment: 2021-2027 Ford F-150 Raptor and 2023-2027 Ford F-150 Raptor R. Fitment confirmed against Ford Performance's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2027 | Ford | F-150 | Raptor |
| 2023-2027 | Ford | F-150 | Raptor R |
$1,670.00
This gloss carbon fiber panel replaces the rear tailgate panel on your F-150 Raptor. It gives the back of the truck a woven carbon look and keeps the Ford lettering.
Real carbon fiber. Ford builds the panel from 3K, 2x2 twill carbon fiber cloth in an autoclave and finishes it in gloss.
Direct replacement. It replaces the OE component and the kit includes the Ford and Raptor emblems plus all required fasteners, hardware and installation materials.
Part of a set. Ford also offers the panel in matte (M-16600-FM) and a complete carbon fiber gloss kit (M-16600K-FG).
Features
- Carbon fiber tailgate panel
- Ford and Raptor emblems included
- Gloss finish; 3K 2x2 twill carbon fiber
- Fasteners, hardware and installation materials included
Fitment: 2021-2027 Ford F-150 Raptor and 2023-2027 F-150 Raptor R with factory-equipped tailgate panel. Fitment confirmed against Ford Performance's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2027 | Ford | F-150 | Raptor (with factory equipped tailgate panel) |
| 2023-2027 | Ford | F-150 | Raptor R (with factory equipped tailgate panel) |
$2,339.08
The Addictive Desert Designs Bomber is a low-profile front bumper built for the third-generation Ford F-150 Raptor and the Raptor R. This version is set up for three Baja Designs LP6 round lights, so you get a finished lighting layout straight out of the box.
Built to protect without losing clearance. The bumper pairs plate steel with lightweight aluminum panels and a full 3/16-inch aluminum skid plate. ADD states it weighs less than the factory front bumper, so the truck's nose is better protected without adding bulk.
Lighting where you want it. Three mounts hold Baja Designs LP6 round lights across the center, and cube light mounts on each wing add side lighting. ADD also builds the Bomber with four Rigid 360 6-inch mounts or two 20-inch light bar mounts; this listing is the Baja Designs LP6 version.
Keeps the factory hardware working. The OEM tow hooks and OEM parking sensors are retained, and the bumper is fully bolt-on. A shutter motor bracket is included with the bumper. For trucks with adaptive cruise control, ADD offers a separate ACC relocation bracket (sold separately) to preserve full ACC use.
Works with ADD cooling upgrades. ADD lists the bumper as compatible with its Raptor Intercooler Kit (IC1650KIT) and the Raptor R High Mount Heat Exchanger Kit (AC21112301NA), both sold separately. If you install the intercooler upgrade on a 2024+ truck, an additional shutter motor relocation kit is required.
Finish and origin. Made in America.
Features
- Modern plate steel design
- Full 3/16-inch aluminum skid plate
- Weighs less than the OEM front bumper
- Mounts for 3 Baja Designs LP6 round lights
- Cube light mounts on each side wing
- Retains OEM tow hooks
- Retains OEM parking sensors
- Shutter motor bracket included
- Fully bolt-on
- Made in America
Fitment: 2021-2026 Ford F-150 Raptor and 2023-2026 Ford F-150 Raptor R. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Bumper Install GuideInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$2,339.08
The Addictive Desert Designs Bomber is a low-profile front bumper built for the third-generation Ford F-150 Raptor and the Raptor R. This version has mounts for four RIGID 360 6-inch round lights, giving the truck a full row of forward lighting.
Built to protect without losing clearance. The bumper pairs plate steel with lightweight aluminum panels and a full 3/16-inch aluminum skid plate. ADD states it weighs less than the factory front bumper.
Lighting where you want it. Four mounts hold RIGID 360 6-inch round lights across the center, and cube light mounts on each wing add side lighting. ADD also builds the Bomber with three Baja Designs LP6 mounts or two 20-inch light bar mounts; this listing is the Rigid 360 version.
Finish. The steel is coated in hammer black powder coat, while the aluminum panels and skid plate carry a satin black powder coat.
Keeps the factory hardware working. The OEM tow hooks and OEM parking sensors are retained, and the bumper is fully bolt-on and made in America. A shutter motor bracket is included. For trucks with adaptive cruise control, ADD offers a separate ACC relocation bracket (sold separately) to preserve full ACC use.
Works with ADD cooling upgrades. ADD lists the bumper as compatible with its Raptor Intercooler Kit (IC1650KIT) and the Raptor R High Mount Heat Exchanger Kit (AC21112301NA), both sold separately. If you install the intercooler upgrade on a 2024+ truck, an additional shutter motor relocation kit is required.
Features
- Modern plate steel design
- Full 3/16-inch aluminum skid plate
- Weighs less than the OEM front bumper
- Mounts for 4 RIGID 360 6-inch round lights
- Cube light mounts on each side wing
- Hammer black powder coat on the bumper, satin black on panels and skid plate
- Retains OEM tow hooks
- Retains OEM parking sensors
- Shutter motor bracket included
- Fully bolt-on, made in America
Fitment: 2021-2026 Ford F-150 Raptor and 2023-2026 Ford F-150 Raptor R. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Bumper Install GuideInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$2,429.08
The Stealth Fighter is Addictive Desert Designs' best-known bumper line, and this version is built for the third-generation Ford F-150 Raptor and the Raptor R. It follows the truck's body lines closely while improving ground clearance and approach angle over the factory bumper.
A tight fit with room for lights. The face of the bumper sits only 1/2 inch proud of the OEM bumper, yet it still has space to hide LED lighting inside. The center mount takes a 40-inch radius light bar or up to ten LED cube lights, and two side mounts hold RIGID 10-inch SR light bars. The side mounts sit behind satin black aluminum panels with vented slots, so unused openings never leave empty holes.
Protection and recovery. Modern radius plate steel gives more protection than the factory bumper, and two reinforced clevis mounts accept soft shackles for recovery. A hammer black powder coat guards against rust and suits the factory exterior trim.
Keeps the factory hardware working. The OEM parking sensors and tow hooks are retained and the bumper is fully bolt-on and made in America. A shutter motor bracket is included. For trucks with adaptive cruise control, ADD offers a separate ACC relocation bracket (sold separately) that moves the sensor behind the grille.
Works with ADD cooling upgrades and winch kit. ADD lists the bumper as compatible with its Raptor Intercooler Kit (IC1650KIT) and the Raptor R High Mount Heat Exchanger Kit (AC21112301NA), both sold separately; a 2024+ truck with the intercooler upgrade needs an additional shutter motor relocation kit. ADD also sells a Stealth Fighter Winch Kit conversion for this bumper.
Features
- Modern radius plate steel design
- Universal light mount kit included for any size or brand of lighting
- Center mount fits a 40-inch radius light bar or up to 10 cube lights
- Side mounts for RIGID 10-inch SR LED lights
- Reinforced clevis mounts accept soft shackles
- Retains OEM parking sensors and tow hooks
- Satin black aluminum side panels, hammer black powder coat
- Shutter motor bracket included
- Fully bolt-on, made in America
Fitment: 2021-2026 Ford F-150 Raptor and 2023-2026 Ford F-150 Raptor R. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Bumper & Winch Kit Install GuideInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$2,429.08
The HoneyBadger from Addictive Desert Designs is a sharp-angled, rugged front bumper for the 2021+ Ford F-150 Raptor and the 2023 Raptor R. This listing is the version with the top hoop, which carries a curved light bar above the bumper.
Lighting in protected positions. The top hoop holds a 30-inch radius LED light bar that follows the curve of the truck's front end. A 20-inch light bar can sit behind the HoneyBadger claw cutaways in the center, and 10-inch light bars mount behind each side panel for extra trail lighting.
Shaped to the truck. The bumper is designed to follow the Raptor's body lines closely while giving the front end a more aggressive stance. The steel has a hammer black powder coat and the aluminum panels a satin black powder coat, which protects against rust.
Sensor and non-sensor trucks. If your Raptor has the 801A High package, the front parking sensors install into the bumper. For trucks with the 800A Standard package, ADD ships sensor plugs to fill the mount holes. The OEM tow hooks fit underneath the bumper, and it is fully bolt-on and made in America.
Works with ADD upgrades. A shutter motor bracket is included. ADD lists compatibility with its Raptor Intercooler Kit (IC1650KIT) and Raptor R High Mount Heat Exchanger Kit (AC21112301NA), both sold separately; a 2024+ truck with the intercooler upgrade needs an additional shutter motor relocation kit. Trucks with adaptive cruise control can add ADD's separate ACC relocation bracket.
Features
- Modern plate steel design that fits tight to the front of the truck
- 30-inch radius LED light bar mount on top of the bumper
- 20-inch straight LED light bar mount in the center
- 10-inch light bar mounts behind each side panel
- Fits trucks with or without front parking sensors
- Retains OEM tow hooks
- Hammer black powder coat, satin black aluminum panels
- Shutter motor bracket included
- Made in America
Fitment: 2021-2026 Ford F-150 Raptor and 2023-2026 Ford F-150 Raptor R. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Bumper Install GuideInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$2,609.08
The Addictive Desert Designs HoneyBadger is a plate-steel front bumper for the 2021 and newer Ford F-150 Raptor and the Raptor R. This version includes the top hoop; ADD also sells the same bumper without it.
Built to follow the truck. The bumper tucks in tight to the front of the Raptor and follows its body lines, with sharp angles and a more aggressive stance. The steel is finished in hammer black powder coat and the aluminum accent panels in satin black.
Lighting where you need it. The top hoop carries a 30 in. radius LED light bar and partly shields it. A 20 in. light bar fits in a protected spot behind the HoneyBadger claw cutaways, and 10 in. light bars fit behind each side panel.
Sensor and non-sensor trucks. If your 2021+ Raptor has the 801A High package, the front parking sensors install in the bumper. Trucks with the 800A Standard package get the supplied sensor plugs for the mount holes. A shutter motor bracket is included.
Plan the extras. ADD lists this bumper as compatible with its Raptor Intercooler Kit (sold separately; it needs the shutter motor relocation kit) and the Raptor R High Mount Heat Exchanger Kit (sold separately). On 2024+ trucks the intercooler kit needs an additional shutter motor relocation kit. ADD also notes the bumper may block the factory front camera view, and recommends its Adaptive Cruise Control relocation bracket to keep ACC working.
Features
- Modern plate steel design that fits tight to the front of the truck
- 20 in. straight LED mount in the center
- 30 in. radius LED mount on top of the bumper
- 10 in. light bar mounts behind each side panel
- Fits sensor and non-sensor trucks
- Hammer black steel with satin black aluminum panels
- Fully bolt-on, made in America
Fitment: 2021-2026 Ford F-150 Raptor and 2023 and newer Ford F-150 Raptor R. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Bumper Install GuideACC Bracket Install Guide
Installation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$2,429.08
The Addictive Desert Designs Phantom is a low-profile front bumper for the third-generation Ford F-150 Raptor and the Raptor R, with a prerunner-inspired layout.
Plate steel, knife's edge look. Instead of traditional tube steel, the Phantom is built from plate steel with contours that mimic the look of trailing arms. The steel is finished in hammer black powder coat and the aluminum accent panels in satin black.
Full-coverage skid plate. A lightweight 3/16 in. aluminum skid plate protects the underside without adding excess weight, and its vented cutouts let air reach the intercooler. ADD notes the intercooler does not need to be moved for proper fitment.
Lighting options. A central 20 in. radius LED light bar mount sits in the bumper, and 10 in. SR light bars fit behind each side panel. The bumper has sensor mounts that keep the factory parking sensors working.
Before you install. ADD states an Adaptive Cruise Control relocation bracket is required for installation, and it also keeps ACC working. A shutter motor bracket ships with the bumper. The bumper is listed as compatible with ADD's Raptor Intercooler Kit (sold separately; it needs the shutter motor relocation kit, and 2024-2025 models need an additional one) and the Raptor R High Mount Heat Exchanger Kit (sold separately).
Features
- Knife's edge design with a low-profile fit
- Fits a 20 in. radius LED light bar and two 10 in. SR LED light bars
- Plate steel construction
- Full-size aluminum skid plate with air vents
- Retains the OEM intercooler and parking sensors
- Hammer black steel with satin black aluminum accent panels
- Fully bolt-on, made in the USA
Fitment: 2021-2026 Ford F-150 Raptor and 2023 and newer Ford F-150 Raptor R. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Bumper Install GuideACC Bracket Install Guide
Installation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$2,699.08
The Addictive Desert Designs Pro Bolt-On is the slimmest-fitting front bumper in ADD's lineup for the 2021-2026 Ford F-150 Raptor and the Raptor R, designed in a prerunner style.
Tube steel that hugs the truck. The main radius is .120 in. wall steel tube that follows the contours of the front end and sits flush with the grille and valance.
Keeps the intercooler where it is. A CNC-cut 1/8 in. aluminum skid plate is vented so air reaches the OEM intercooler, which stays in its original position. A shutter motor bracket is included with the bumper.
Flexible lighting. The universal light mount in the center takes up to six cube lights or a 20 in. radius LED light bar, protected by the lower tube, the skid plate and side steel plating. The optional ADD PRO Bolt-On Light Hoop, sold separately, adds mounting for up to four 6 in. round lights in the same low-profile style.
Winch-ready option. ADD also offers a winch conversion kit that lets this bumper accept a winch; it bolts to the truck's frame and sits behind the winch plate. It is selected as an option on ADD's page and is not part of this listing.
Plan the extras. ADD lists the bumper as compatible with its Raptor Intercooler Kit (sold separately; it needs the shutter motor relocation kit, and 2024-2025 models need an additional one) and the Raptor R High Mount Heat Exchanger Kit (sold separately).
Features
- Follows the contours of the front end with a low profile
- Retains the OEM intercooler location
- Light mounts for up to six cube lights or a 20 in. radius LED bar
- .120 in. wall steel tubing
- CNC-cut aluminum skid plate
- Hammer black steel with satin black panels
- Fully bolt-on, made in America
Fitment: 2021-2026 Ford F-150 Raptor and 2023 and newer Ford F-150 Raptor R. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Bumper, Winch Kit, and Light Hoop Install GuideACC Bracket Install Guide
Installation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$1,619.08
The Rock Fighter Rear Bumper from Addictive Desert Designs gives the third-generation Ford F-150 Raptor a low-profile steel bumper that guards the tailgate and rear body from rocks and brush on the trail.
Low-profile protection. The design follows the lines of the Raptor and puts a solid steel barrier between obstacles and the back of the truck without adding a lot of visual bulk.
Keeps the factory features. ADD built the bumper to retain the OEM parking sensors, license plate lights, trailer plug and wiring, and all recovery points, so nothing on the truck has to be given up.
Light mounts on the wings. A pair of side wing mounts accepts cube lights for extra light behind the truck in low-light conditions.
Finish and install. Made from steel with a 2-stage hammer black powder coat, the bumper installs fully bolt-on and is made in the USA.
Features
- Low-profile steel design
- Pair of side cube light mounts
- Retains OEM parking sensors
- Retains OEM license plate lights
- Retains OEM trailer plug and wiring
- Retains OEM recovery points
- 2-stage hammer black powder coat finish
- Fully bolt-on installation
- Made in the USA
Prop 65. WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Fitment: Ford F-150 Raptor 2021-2026 and F-150 Raptor R 2023-2026. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Installation Instructions (ADD)Installation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$2,249.08
The HoneyBadger Rear Bumper from Addictive Desert Designs is a plate steel, box-design replacement for the factory rear bumper on the third-generation Ford F-150 Raptor and Raptor R. ADD shaped it to follow the Raptor's dovetail rear body lines closely.
Plate steel box design. The modern box construction offers more protection than the factory piece, while the stock dual exhaust and tow hooks still sit comfortably below the bumper.
Sensors stay working. Sensor cutouts keep the parking and backup warning system fully functional, and the OEM license plate lights and tow wiring plug or harness are retained.
Recovery and lighting. Two reinforced 1 in. clevis mounts accept soft shackles for recovery. Near each end, 10 in. LED light bar mounts sit behind satin black aluminum panels with badger claw cutouts, and two cube light mounts sit on each side of the center.
Trailer wiring. A factory or aftermarket trailer wiring harness can be mounted to the underside of the bumper near the hitch. The bumper installs fully bolt-on and is made in America.
Features
- Plate steel box design
- Compatible with factory backup sensors
- 10 in. LED light bar mounts behind side accent panels
- Cube light mounts for additional lighting
- Reinforced 1 in. clevis mounts accept soft shackles
- Retains OEM license plate lights, tow hooks and tow wiring plug or harness
- Hammer black powder coat with satin black panels
- Made in America
Prop 65. WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Fitment: Ford F-150 Raptor 2021-2026 and F-150 Raptor R 2023-2026. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Installation Instructions (ADD)Installation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$1,619.08
The Phantom Rear Bumper from Addictive Desert Designs is a plate steel upgrade for the third-generation Ford F-150 Raptor and Raptor R, built in a modern box structure that protects more than the factory bumper.
Hammerhead styling. Sleek wings flare out in a bold hammerhead shape that pairs with the Raptor's rear bodywork.
Factory features retained. Sensor cutouts keep the parking and backup warning system working. The factory dual exhaust and tow hooks fit comfortably below the bumper, and the OEM license plate lights and tow wiring plug or harness are retained.
Lighting built in. Mounting points for two 10 in. single-row LED light bars sit behind satin black aluminum accent panels.
Complete and bolt-on. The bumper comes with all hardware, installs 100% bolt-on and is made in the USA.
Features
- Plate steel box design
- 10 in. single row light bar mounts behind side accent panels
- Parking sensor cutouts, compatible with factory backup sensors
- Retains OEM license plate lights, tow hooks and tow wiring plug or harness
- Hammer black powder coat finish
- All hardware included
- Made in America
Prop 65. WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Fitment: Ford F-150 Raptor 2021-2026 and F-150 Raptor R 2023-2026. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Installation Instructions (ADD)Installation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$2,069.08
The ADD Pro Bolt-On Rear Bumper brings the slim, prerunner look of ADD's front Pro Bolt-On bumper to the back of the third-generation Ford F-150 Raptor and Raptor R.
Tube steel strength. The bumper is constructed from .120 in. wall steel tubing for durable protection at the rear of the truck, and the structural steel plates are finished in hammer black powder coat.
CNC aluminum top plate. The top plate is CNC cut aluminum with a satin black powder coat finish.
Lighting options. Pod light mounts toward both ends take 3 in. LED cube lights. ADD notes these can be wired to the reverse lights or to a separate harness for supplemental lighting off-road.
Factory features kept. The bumper retains the OEM reverse sensors, license plate lights, hitch and trailer harness, and tow hooks. It installs fully bolt-on and is made in America.
Features
- .120 in. wall steel tubing construction
- CNC cut aluminum top plate
- Mounts for two 3 in. LED cube lights
- Retains OEM reverse sensors and backup sensor cutouts
- Retains OEM hitch and trailer harness functionality
- Retains OEM tow hooks and license plate lights
- Satin black powder coat panel finish
- Hammer black powder coat finish
- Made in America
Prop 65. WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Fitment: Ford F-150 Raptor 2021-2026 and F-150 Raptor R 2023-2026. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Installation Instructions (ADD)Installation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$1,799.08
The Stealth Fighter Rear Bumper from Addictive Desert Designs is one of the brand's slimmest bumpers, made for the 2021+ Ford F-150 Raptor and Raptor R. It follows the body lines of the truck and suits the factory dovetail styling. This version comes in hammer black with two cube lights.
Slim and strong. Modern radius plate steel gives the bumper more protection than the factory rear bumper while measuring the same length from the tailgate. Recessed satin black powder coated aluminum panels cut weight.
Light mounts. Behind each panel are mounting points for rear-facing LED cube lights, handy for lighting up the bed in low light. Two integrated license plate lights come with the bumper.
Keeps the factory hardware. The bumper retains the OEM tow hitch, tow hooks, and dual exhaust, and sensor cutouts let the factory parking sensors keep working.
Features
- Modern radius plate steel design
- Complements the factory dovetail style
- 2 universal cube light mounts
- Integrated license plate lights
- Reinforced clevis mounts accept soft shackles
- Retains OEM tow hooks, tow hitch, and dual exhaust
- Retains OEM parking sensors
- Bumper color: hammer black; panel color: satin black
- Fully bolt-on
- Made in America
California Proposition 65. WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Fitment: 2021+ Ford F-150 Raptor and Raptor R. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Install InstructionsInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021+ | Ford | F-150 | Raptor, Raptor R |
$2,249.08
The Rock Fighter is a pre-runner style steel front bumper from Addictive Desert Designs for the Ford F-150 Raptor and Raptor R. It replaces the factory front bumper with a low-profile, plate-steel design, satin black accent panels and an included aluminum skid plate, and it is built and finished in the USA.
Protection under the nose. The included 3/16-inch aluminum skid plate is lightweight and rust-proof, and it has integrated air vents so the intercooler keeps getting airflow.
Keeps factory equipment working. The design retains the OEM parking sensors and the OEM intercooler. Adding the Adaptive Cruise Control Relocation Bracket (sold separately) lets you keep full use of the truck's ACC functions.
Built-in lighting. A center mount holds a 20-inch dual-row radius LED light bar or five cube lights, so you can add light for low-visibility terrain without extra brackets.
Finish and install. Two-stage hammer black powder coat guards the steel against scratches from brush and rocks, and the bumper is fully bolt-on.
2024+ F-150 Raptor note. On 2024+ Raptor models (not the Raptor R), the Shutter Motor Relocation Kit is needed so no dash lights appear when the lower intercooler shutter motor is disconnected for installation. ADD includes a shutter motor bracket with this bumper. It is also compatible with ADD's Raptor Intercooler Kit and Raptor R High Mount Heat Exchanger Kit (both sold separately); 2024+ models with the intercooler kit need the shutter motor relocation kit.
Features
- Low-profile fitment, steel construction
- Included 3/16 in. aluminum skid plate with air vents
- Center mount for a 20 in. dual-row radius LED light bar or five cube lights
- Satin black powder coat aluminum accent panels
- Retains OEM parking sensors and intercooler
- Optional ACC relocation bracket keeps ACC functions
- Two-stage hammer black powder coat finish
- Fully bolt-on installation
- Made in the USA
Prop 65 warning. This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Fitment: 2021-2026 Ford F-150 Raptor and 2023-2026 Ford F-150 Raptor R (Addictive Desert Designs lists the bumper for the 2021+ Raptor and 2023+ Raptor R). Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Bumper Install GuideInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$1,715.95
Fits the 2024-2026 Ford F-150 Raptor R and 2024-2026 Ford F-150 Raptor 37.
The Baja Designs 6 XL Linkable Kit is a bumper-mounted auxiliary lighting package built around six XL Sport LED pods. It is designed to follow the bumper line on the Raptor R and Raptor 37 with vehicle-specific brackets, while the linked assembly can be arranged straight or arced to suit the front end.
This kit uses a mix of wide cornering, driving/combo, and spot optics to light multiple zones at once. Baja Designs lists 5000K color temperature, 45 degrees of vertical pitch adjustment, independent horizontal adjustment for each pod, DirectSink thermal management, and uService replaceable lenses and optics. MoistureBlock construction carries an IP69K waterproof rating and is submersible up to 9 feet.
- Part number: 448308
- Included light bar assembly: 1 x 6XL Linkable Light Bar with 6 XL Sport Linkable light pods
- Included brackets: 2 bumper mounting brackets for Raptor R/37
- Included wiring harness: 640163
- Included protection: black rock guard covers
- Included hardware: all necessary mounting hardware
- Switching: wiring supports a toggle switch or OEM factory upfitter switches
Installation is bumper-mounted and uses the included vehicle-specific brackets, pre-crimped and trimmed wiring, and supplied hardware. No additional parts are required. The kit arrives as a complete lighting package with the bar assembly, brackets, harness, covers, and hardware in the box.
Baja Designs notes total forward light output at 18,972 lumens. The linked layout is intended to give the driver flexible forward lighting across multiple terrain zones without needing to piece together separate auxiliary lights.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering.
$719.08
This add-on light hoop from Addictive Desert Designs bolts onto the ADD PRO Bolt-On front bumper for the Ford F-150 Raptor and gives you room for four more 6-inch round lights. It is made in the USA, and the whole install takes only a handful of minutes.
Four more round lights. The hoop accommodates four 6-inch round LED lights, on top of what the bumper's own center mount carries, for extra reach on dark trails.
Same tubing as the bumper. It is built from the same .120-inch wall steel tubing as the PRO Bolt-On bumper it mounts to, so the styling stays consistent and low-profile.
Stays close to the bumper. The hoop protrudes only 4 inches further than the main tube of the bumper, so it does not push the front of the truck out any more than it has to.
Fully bolt-on. No cutting or welding is needed, and it mounts to the ADD PRO Bolt-On front bumper (F218102070103), which is required.
Features
- Works with the ADD PRO Bolt-On front bumper
- Accommodates four 6 in. round lights
- Protrudes only 4 in. further than the bumper's main tube
- .120 in. wall steel tubing
- Fully bolt-on
- Made in the USA
Fitment: 2021-2026 Ford F-150 Raptor and 2023+ Ford F-150 Raptor R (2023-2026), the vehicles ADD lists for the PRO Bolt-On front bumper this hoop adds to. The hoop's own page text still reads 2021-2023, which looks like an older note, so fitment follows the bumper's listing. Fitment confirmed against Addictive Desert Designs' published application list for the PRO Bolt-On front bumper.
Guides & Manuals
Bumper, Winch Kit, and Light Hoop Install GuideThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$1,167.95
Baja Designs Squadron Sport 2.0 Behind-the-Grille Kit, part number 440016, mounts six Squadron 2.0 Sport LED pods behind the OEM Ford grille for auxiliary lighting while keeping the front end looking factory.
Fitment summary: 2021-2026 Ford F-150 King Ranch, Lariat, Platinum, Police Responder, Raptor, SSV, Tremor, XL, and XLT; 2021-2023 Ford F-150 Limited; 2024-2026 Ford F-150 STX.
This kit uses vehicle-specific steel brackets and a bolt-on layout. Baja Designs says it installs without cutting or drilling factory components. The included main wiring harness and factory upfitter harness are designed to tie into the Ford upfitter switches.
Each Squadron 2.0 Sport pod is a square LED light pod with a 3.29 in height, 3.32 in depth, and 2.84 in length/width. Output is 3,200 raw lumens per pod, for 19,200 raw lumens total. Power draw is 30 watts and 2.2 amps per pod at 13.8V DC, or 180 watts and 13.2 amps total at 13.8V DC.
- Six Squadron 2.0 Sport LED pods: 2 wide cornering clear, 2 driving combo clear, 2 spot clear
- Integrated RGBW backlight with 9 user-selectable color options
- 5000K daylight color temperature
- IP69K ingress protection
- Standard 4-pin Deutsch connector
- Primary operating voltage: 12V-32V DC
- Backlight operating voltage: 11V-14V DC
- Updated second-generation Squadron 2.0 optics with reduced light spill
- Redesigned behind-the-grille steel brackets with increased vertical aiming adjustability
- uService design with clip-in reflectors and a redesigned gasket to prevent pinched O-rings
- MoistureBlock sealing, CopperDrive thermal management, and DirectSink thermal path technology
The kit arrives with the light pods, behind-the-grille brackets, a wiring harness, a factory upfitter wiring harness, and mounting hardware. A 9/16 in socket and wrench are required for pod-to-bracket installation on a 2021+ Ford Raptor.
Baja Designs lists a 30-day money-back satisfaction guarantee and a manufacturer limited lifetime warranty. It is not compatible with adaptive cruise control relocation kits.
This listing preserves the complete manufacturer fitment table for the vehicles named above. The manufacturer also identifies this kit as a LED light pod kit, behind-the-grille kit, with Squadron 2.0 Sport pods and clear lenses.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | Police Responder |
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
The MBRP ditch light brackets give you a mounting point for ditch lights on a 2021-2026 Ford F-150 Raptor or a 2023-2026 Raptor R. The kit has both the driver-side and passenger-side brackets in a black-coated steel finish.
Brackets only. MBRP states that lights are not included. The brackets are the foundation for mounting your own ditch lights, so you can choose the light assemblies you prefer.
Black-coated steel. The brackets are black-coated steel for a sleek, dark look.
Both sides in the kit. The kit contains a passenger-side and a driver-side bracket.
Features
- Black-coated steel ditch light brackets
- Kit includes driver-side and passenger-side brackets
- Lights not included
- 1-year MBRP warranty
Emissions: California Proposition 65 warning applies (chromium, nickel). This is not an exhaust or emissions part.
Fitment: 2021-2026 Ford F-150 Raptor and 2023-2026 Ford F-150 Raptor R; MBRP also lists the F-150 trims shown below. Fitment confirmed against MBRP's published application list.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | Police Responder |
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2021-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
Eibach Pro-Lift-Kit springs are designed to provide a suspension lift for your vehicle without the use of coilover systems or spacer lifts. Eibach spring lifts allow full range of suspension travel without additional stress on bushings and ball-joints as seen with spacer lift systems.
Installation Instructions- Precision Engineered for Improved Off-Road Capability.
- More Fender Clearance for Larger Wheels and Tires.
- Excellent On-Road Stability and Handling.
- Increased Ground Clearance.
- Made in U.S.A.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2025 | Ford | F-150 | Raptor |
- Choosing a selection results in a full page refresh.
- Opens in a new window.