Welcome to RaptorsOnly.com
-
Brands
Shop by brand
- 3D MAXpider
- Access
- Addictive Desert Designs
- Advan
- AEM Induction
- aFe
- Air Lift
- Airaid
- Alcon
- AlphaRex
- AMP Research
- AMS
- Anderson Composites
- ANZO
- ARB
- Atturo Tire
- AutoMeter
- AVS
- AWE Tuning
- BackRack
- Baer Brakes
- Baja Designs
- BAK
- Banks Power
- BBK
- BBS
- BD Diesel
- Belltech
- Bestop
- BFGoodrich
- BMC
- Body Armor 4x4
- Borla
- Brembo
- Brembo OE
- Bully Dog
- Bushwacker
- Camburg
- Clevite
- COBB
- Cometic Gasket
- COMP Cams
- CORSA Performance
- Covercraft
- CSF
- DBA
- DeatschWerks
- DFC
- Diode Dynamics
- DS18
- DV8 Offroad
- Eaton
- EBC
- Eibach
- Enkei
- Extang
- Fabtech
- Fel-Pro
- fifteen52
- Firestone
- Flowmaster
- Ford Racing
- Forgestar
- FORM Lighting
- FOX
- Garrett
- Gates
- GEN-Y Hitch
- Go Fast Bits
- Go Rhino
- Gram Lights
- Granatelli Motor Sports
- GSC Power Division
- Hawk Performance
- Hella
- Hellwig
- Hotchkis
- Husky Liners
- ICON
- Injen
- J&L
- JBA
- JLT
- K&N Engineering
- KC HiLiTES
- King Engine Bearings
- King Shocks
- Kleinn Air Horns
- Kooks Headers
- KYB
- LIQUI MOLY
- LUND
- Magnaflow
- Mahle OE
- Maxtrac
- Mayhem
- MBRP
- McGard
- Method Wheels
- MGP
- Michelin
- Mickey Thompson
- Mishimoto
- Moog
- Motul
- MTX Wheels
- N-Fab
- Nacho Offroad Technology
- NGK
- Nitrous Express
- Odyssey Battery
- ORACLE Lighting
- PowerStop
- Putco
- QA1
- Raceline
- Radium Engineering
- Rally Armor
- Rampage
- Raxiom
- Retrax
- Rhino-Rack
- Ridetech
- Rigid Industries
- Rival 4x4
- RockJock
- Roll-N-Lock
- Roush
- Royal Purple
- SCT Performance
- Skyjacker
- Snow Performance
- SPC Performance
- SPOD
- Stainless Works
- Superlift
- Superpro
- Timbren
- Torque Solution
- TOYO
- Truxedo
- Tuff Country
- Turbosmart
- UMI Performance
- Undercover
- Volant
- Vossen
- Wagner Tuning
- WeatherTech
- Weld
- Westin
- Whiteline
- Wilwood
- Yokohama Tire
- Yukon Gear & Axle
- Zone Offroad
No brands found. Try another name or initial.
156 brands
View all brands -
F-150 Raptor
- F-150 Raptor
-
1st Gen (2010-2014)
-
2nd Gen (2017-2020)
-
3rd Gen (2021-Present)
-
Raptor R (2023-Present)
-
Bronco Raptor
- Bronco Raptor
-
Suspension
-
Lighting
-
Bumpers & Armor
-
Racks
-
Interior Accessories
-
Exterior Accessories
-
Performance
-
Wheels & Tires
-
Brakes
-
Drivetrain
-
Engine & Cooling
-
Ranger Raptor
- Ranger Raptor
-
Suspension
-
Lighting
-
Bumpers & Armor
-
Racks
-
Interior Accessories
-
Exterior Accessories
-
Performance
-
Wheels & Tires
-
Brakes
-
Drivetrain
-
Engine & Cooling
Your cart
Subheading
Product comparison
Describe you product comparison grid
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
Intercoolers
Choose a type to refine the products below.
23 products
23 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$1,499.99
This is the ADD High Mount Intercooler Upgrade Kit, Normal blow-off valve (BOV) version, for the 2017-2025 Ford F-150 Raptor. It is designed to work with Addictive Desert Designs bumpers for the Ford Raptor and F-150, with a mount layout tuned for frame-cut and winch-mount bumpers.
More airflow. ADD states the improved intercooler flows 8.5% more than the leading competitors in the market. The main assembly is an 18-core design and the whole intercooler is 100% TIG welded.
Built for off-road use. The intercooler sits on a welded steel mounting beam that ADD describes as strong enough for off-road use.
Keeps factory functions. The kit retains all OEM sensors and functions. It includes bracketry to relocate the adaptive cruise control module on the 2015-2017 and 2018-2020 F-150 and the 2017-2020 F-150 Raptor. For the 2021-2023 F-150 (AC19152501NA), 2021-2023 F-150 Raptor (AC2101501NA) and 2024 F-150 Raptor (AC1305101NA), ADD requires its separate adaptive cruise control bracket.
Emissions. CARB compliant under Executive Order D-812.
Not for the Raptor R. ADD states this kit is not compatible with the F-150 Raptor R.
Features
- Normal BOV version
- 8.5% more flow than the nearest competitor, per ADD
- 18-core intercooler, 100% TIG welded
- Steel mounting beam ready for off-road use
- Mount design optimized for frame-cut and winch-mount bumpers
- Retains all OEM sensors and functions
- CARB compliant, EO D-812
Fitment: 2015-2023 Ford F-150 and 2017-2025 Ford F-150 Raptor (excluding Raptor R). Not compatible with the Raptor R. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
2015-2020 Normal BOV Install Guide2021-2024 Normal BOV Install Guide
Installation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2025 | Ford | F-150 | Raptor (excluding Raptor R) |
| 2015-2023 | Ford | F-150 | All trims |
The COBB Front Mount Intercooler in silver is a bolt-in replacement for the factory intercooler on EcoBoost-powered Ford F-150 trucks, including the Raptor, Limited and Tremor, and on the 3.5L EcoBoost Expedition and Navigator. It sits in the factory location and mates to the factory shutter shroud, so it installs with no cutting, trimming or permanent modification to the vehicle.
Built to fight heat soak. COBB notes that the stock front mount intercooler on the 2.7L and 3.5L EcoBoost F-150 is undersized and quickly becomes heat soaked, which reduces available power. This cast aluminum, TIG welded assembly has a core with about 70% greater volume than stock and 10% more cooling surface area.
Smoother flow by design. COBB designed the unit in house and used computational fluid dynamics to shape the end tanks for even flow with no areas of significant turbulence. The outlet port has a large chamfer for a smooth transition into the throttle body tube, which further reduces turbulence in the charge-air system.
Factory-style airflow. The intercooler mates snugly to the OEM shutter shroud so air is funneled through the ambient side fins just like the factory unit.
Ready for water or methanol injection. Two flat sections are cast into the tank. The top flat can be drilled and tapped for a nozzle, and the bottom flat can serve as a drain port.
Features
- Silver finish, factory-location design
- Core with about 70% more volume than the stock intercooler
- Cooling surface area 10% larger than stock
- Cast aluminum, TIG welded assembly
- No cutting, trimming or permanent modification required
- Mates to the OEM shutter shroud to channel air through the side fins
- Smoothed end tank and chamfered outlet port, shaped with computational fluid dynamics
- Flat sections cast in for water or methanol injection nozzle and drain
- Compatible with Accessport off-the-shelf maps
Emissions: 50-state legal on emissions-controlled vehicles when used in accordance with COBB's application guide. CARB Executive Orders D-660-19, D-660-49, D-660-81, D-660-131, D-660-141, D-660-208, D-660-263 and D-660-353.
Fitment: 2017-2026 Ford F-150 3.5L EcoBoost and Raptor, 2018-2023 F-150 2.7L EcoBoost, 2019-2020 F-150 Limited, 2021-2026 F-150 Tremor, and 2018-2026 Ford Expedition and Lincoln Navigator (US models). COBB also states the Expedition and Navigator fitment is for the 3.5L EcoBoost. Fitment confirmed against COBB's published application list.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | 3.5L |
| 2018-2023 | Ford | F-150 | 2.7L |
| 2017-2026 | Ford | F-150 | Raptor |
| 2019-2020 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Tremor |
| 2018-2026 | Ford | Expedition | |
| 2018-2026 | Lincoln | Navigator |
The COBB Front Mount Intercooler in black is a bolt-in replacement for the factory intercooler on EcoBoost-powered Ford F-150 trucks, including the Raptor, Limited and Tremor, and on the 3.5L EcoBoost Expedition and Navigator. It sits in the factory location and mates to the factory shutter shroud, so it installs with no cutting, trimming or permanent modification to the vehicle.
Built to fight heat soak. COBB notes that the stock front mount intercooler on the 2.7L and 3.5L EcoBoost F-150 is undersized and quickly becomes heat soaked, which reduces available power. This cast aluminum, TIG welded assembly has a core with about 70% greater volume than stock and 10% more cooling surface area.
Smoother flow by design. COBB designed the unit in house and used computational fluid dynamics to shape the end tanks for even flow with no areas of significant turbulence. The outlet port has a large chamfer for a smooth transition into the throttle body tube, which further reduces turbulence in the charge-air system.
Factory-style airflow. The intercooler mates snugly to the OEM shutter shroud so air is funneled through the ambient side fins just like the factory unit.
Ready for water or methanol injection. Two flat sections are cast into the tank. The top flat can be drilled and tapped for a nozzle, and the bottom flat can serve as a drain port.
Features
- Black finish, factory-location design
- Core with about 70% more volume than the stock intercooler
- Cooling surface area 10% larger than stock
- Cast aluminum, TIG welded assembly
- No cutting, trimming or permanent modification required
- Mates to the OEM shutter shroud to channel air through the side fins
- Smoothed end tank and chamfered outlet port, shaped with computational fluid dynamics
- Flat sections cast in for water or methanol injection nozzle and drain
- Compatible with Accessport off-the-shelf maps
Emissions: 50-state legal on emissions-controlled vehicles when used in accordance with COBB's application guide. CARB Executive Orders D-660-19, D-660-49, D-660-81, D-660-131, D-660-141, D-660-208, D-660-263 and D-660-353.
Fitment: 2017-2026 Ford F-150 3.5L EcoBoost and Raptor, 2018-2023 F-150 2.7L EcoBoost, 2019-2020 F-150 Limited, 2021-2026 F-150 Tremor, and 2018-2026 Ford Expedition and Lincoln Navigator (US models). COBB also states the Expedition and Navigator fitment is for the 3.5L EcoBoost. Fitment confirmed against COBB's published application list.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | 3.5L |
| 2018-2023 | Ford | F-150 | 2.7L |
| 2017-2026 | Ford | F-150 | Raptor |
| 2019-2020 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Tremor |
| 2018-2026 | Ford | Expedition | |
| 2018-2026 | Lincoln | Navigator |
Smooth transitions in the mandrel-bent aluminum pipes decrease turbulence and minimize pressure loss, increasing horsepower and torque. This kit includes high-quality, stainless-steel, spring-loaded T-bolt clamps and heavy-duty, 5-ply, polyester reinforced silicone couplings. This charge pipe kit also features factory style billet aluminum quick-connect adapters with o-ring seals to ensure a leak-free fit while maintaining superior strength and durability. Finished in wrinkle black powder coating with a unique laser-etched aFe POWER logo for a custom look.
Installation Instructions- Powder Coated for Heat and Corrosion Resistance
- Premium Stainless-Steel T-Bolt Clamps
- TIG-Welded Aluminum Piping
- 5-Ply Silicone Couplings
- Optional 1/8" NPT Ports
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | F-150 | King Ranch |
| 2021-2025 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2025 | Ford | F-150 | Platinum |
| 2021-2025 | Ford | F-150 | Police Responder |
| 2021-2025 | Ford | F-150 | Raptor |
| 2021-2025 | Ford | F-150 | SSV |
| 2021-2025 | Ford | F-150 | Tremor |
| 2021-2025 | Ford | F-150 | XL |
| 2021-2025 | Ford | F-150 | XLT |
Smooth transitions in the mandrel-bent aluminum pipes decrease turbulence and minimize pressure loss, increasing horsepower and torque. This kit includes high-quality, stainless-steel, spring-loaded T-bolt clamps and heavy-duty, 5-ply, polyester reinforced silicone couplings. This charge pipe kit also features factory style billet aluminum quick-connect adapters with o-ring seals to ensure a leak-free fit while maintaining superior strength and durability. Finished in wrinkle black powder coating with a unique laser-etched aFe POWER logo for a custom look.
Installation Instructions- Premium Stainless-Steel T-Bolt Clamps
- Features Factory Style Quick-Connect
- TIG-Welded Aluminum Piping
- 5-Ply Silicone Couplings
- Optional 1/8" NPT Ports
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | F-150 | King Ranch |
| 2021-2025 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2025 | Ford | F-150 | Platinum |
| 2021-2025 | Ford | F-150 | Police Responder |
| 2021-2025 | Ford | F-150 | Raptor |
| 2021-2025 | Ford | F-150 | SSV |
| 2021-2025 | Ford | F-150 | Tremor |
| 2021-2025 | Ford | F-150 | XL |
| 2021-2025 | Ford | F-150 | XLT |
$1,099.95
$1,099.95
$1,099.95
$1,099.95
$674.96
$674.96
$674.96
$674.96
$2,185.00
The COBB Stage 2 Power Package (No Intake) with the black Factory Location Intercooler is for 2021-2023 Ford F-150 Raptor owners who want a bigger intercooler without cutting or trimming. It includes the Accessport V3 with ECU and TCM flashing, COBB's black factory-location front mount intercooler and a COBB vehicle badge.
Accessport V3 with TCM flashing. The handheld plugs into the OBD-II port, identifies your truck and loads COBB's Off-The-Shelf maps. It can flash the TCM, the unit that controls the transmission, as well as the engine computer. A full-color screen shows up to six live parameters, and it stores up to 100 calibrations.
No cutting or trimming. This cast aluminum, TIG-welded intercooler mates to the OEM shutter shroud and needs no cutting, trimming or permanent modification. COBB gives it a core about 70% larger in volume than stock, with roughly 10% more cooling surface area.
Built for flow and add-ons. COBB used computational fluid dynamics to shape the end tanks for even flow, and added a chamfered outlet to ease the path into the throttle body tube. Two flat sections in the casting can be drilled and tapped for water or methanol injection and a drain.
Intake not included. COBB advises adding its Intake Scoop Bracket (8G4625) if you still run the factory intake snorkel.
Features
- Accessport V3 with ECU and TCM flashing
- Black factory-location front mount intercooler
- Cast aluminum, TIG-welded construction
- COBB vehicle badge
- Compatible with COBB Accessport Off-The-Shelf maps
Emissions
50-state legal when used per COBB's application guide. CARB Executive Order number: D-660-135. COBB notes that 2021-2022 trucks are 50-state legal, while model year 2023 is 49-state approved and not yet sold in California. California residents: Prop 65 warning applies.
Fitment: 2021-2023 Ford F-150 Raptor. Fitment confirmed against COBB's published application list.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2023 | Ford | F-150 | Raptor |
$2,655.00
The COBB Stage 2 Power Package (No Intake), Silver, is for 2021-2023 Ford F-150 Raptor owners who already run an aftermarket intake or plan to add one separately. It includes the Accessport V3 with ECU and TCM flashing, a silver front mount intercooler and a COBB vehicle badge.
Accessport V3 with TCM flashing. The handheld plugs into the OBD-II port, identifies your truck and loads COBB's Off-The-Shelf maps. It can flash the TCM, the unit that controls the transmission, as well as the engine computer. A full-color screen shows up to six live parameters, and it stores up to 100 calibrations.
Front mount intercooler. COBB's silver front mount intercooler has a 24" wide by 14" tall by 3.5" thick core, much larger than stock, so pressure drop stays low. Installation needs minor trimming behind the grille and keeps the factory Adaptive Cruise Control bracket when you use the stock bumper.
Intake not included. COBB advises adding its Intake Scoop Bracket (8G4625) if you still run the factory intake snorkel.
Features
- Accessport V3 with ECU and TCM flashing
- Silver front mount intercooler
- COBB vehicle badge
- Compatible with COBB Accessport Off-The-Shelf maps
Emissions
50-state legal when used per COBB's application guide. CARB Executive Order number: D-660-135. California residents: Prop 65 warning applies.
Fitment: 2021-2023 Ford F-150 Raptor. Fitment confirmed against COBB's published application list.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2023 | Ford | F-150 | Raptor |
$3,120.00
The COBB Stage 2 Power Package, Black, bundles COBB's Stage 2 hardware for the 2021-2023 Ford F-150 Raptor: the Accessport V3, a black front mount intercooler, the COBB Intake System with HCT, and a COBB vehicle badge.
Accessport V3. The handheld plugs into the OBD-II port and arrives preloaded with COBB's engine and transmission calibrations. A full-color screen shows up to six live parameters, and you can set up street, race or dyno gauge layouts and mount it with one of thousands of standard mounts.
Front mount intercooler. COBB's black front mount intercooler pairs with the Stage 2 calibration to keep intake temperatures in check.
COBB Intake System with HCT. A COBB intake with a high-flow filter replaces the factory airbox components for better airflow.
Protect the snorkel. COBB advises fitting its Intake Scoop Bracket (8G4625) if you still run the factory intake snorkel.
Features
- Accessport V3 with preloaded ECU and transmission calibrations
- Black front mount intercooler
- COBB Intake System with HCT
- COBB vehicle badge
Emissions
50-state legal when used per COBB's application guide. CARB Executive Order numbers: D-660-135, D-660-245, D-660-289.
Fitment: 2021-2023 Ford F-150 Raptor. Fitment confirmed against COBB's published application list.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2023 | Ford | F-150 | Raptor |
The COBB Front Mount Intercooler (Silver) is a larger-capacity replacement for the factory intercooler on the EcoBoost-powered Ford F-150, including the Raptor. Paired with tuning from a COBB V3 Accessport, COBB positions it as one of the most effective modifications for getting more out of the stock turbochargers.
A much larger core. The core measures 24 inches wide by 14 inches tall by 3.5 inches thick. That is a significant volume increase over the stock unit, which COBB says keeps pressure drop minimal despite the extra size.
Efficiency first. Cooler, denser charge air helps the engine make the most of its stock turbos, and COBB notes there is plenty of headroom left for future upgrades. COBB publishes comparison data showing the improvement over the stock intercooler.
Straightforward installation. The kit installs with minor trimming on the back side of the grille, and it retains the factory Adaptive Cruise Control bracket when you keep the stock bumper.
Features
- Silver finished front mount intercooler core, 24" W x 14" H x 3.5" thick
- Minimal pressure drop despite the larger core
- Designed to be paired with V3 Accessport tuning
- Keeps the factory Adaptive Cruise Control bracket with the stock bumper
- Install requires minor trimming on the back of the grille
- Complete kit with support bar, brackets, couplers, clamps and hardware, as shown in the product photos
Emissions: 50-state legal on emissions-controlled vehicles when used in accordance with COBB's application guide. CARB Executive Order D-660-19, D-660-49, D-660-81, D-660-131, D-660-141, D-660-208, D-660-263, D-660-353.
Fitment: 2017-2026 Ford F-150 Raptor, 2017-2026 F-150 3.5L, 2018-2023 F-150 2.7L, 2019-2020 F-150 Limited and 2021-2026 F-150 Tremor (US models). Fitment confirmed against COBB's published application list.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2017-2026 | Ford | F-150 | 3.5L |
| 2018-2023 | Ford | F-150 | 2.7L |
| 2019-2020 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Tremor |
The COBB Front Mount Intercooler (Black) is a larger-capacity replacement for the factory intercooler on the EcoBoost-powered Ford F-150, including the Raptor. Paired with tuning from a COBB V3 Accessport, COBB positions it as one of the most effective modifications for getting more out of the stock turbochargers.
A much larger core. The core measures 24 inches wide by 14 inches tall by 3.5 inches thick. That is a significant volume increase over the stock unit, which COBB says keeps pressure drop minimal despite the extra size.
Efficiency first. Cooler, denser charge air helps the engine make the most of its stock turbos, and COBB notes there is plenty of headroom left for future upgrades. COBB publishes comparison data showing the improvement over the stock intercooler.
Straightforward installation. The kit installs with minor trimming on the back side of the grille, and it retains the factory Adaptive Cruise Control bracket when you keep the stock bumper.
Features
- Black finished front mount intercooler core, 24" W x 14" H x 3.5" thick
- Minimal pressure drop despite the larger core
- Designed to be paired with V3 Accessport tuning
- Keeps the factory Adaptive Cruise Control bracket with the stock bumper
- Install requires minor trimming on the back of the grille
- Complete kit with support bar, brackets, couplers, clamps and hardware, as shown in the product photos
Emissions: 50-state legal on emissions-controlled vehicles when used in accordance with COBB's application guide. CARB Executive Order D-660-19, D-660-49, D-660-81, D-660-131, D-660-141, D-660-208, D-660-263, D-660-353.
Fitment: 2017-2026 Ford F-150 Raptor, 2017-2026 F-150 3.5L, 2018-2023 F-150 2.7L, 2019-2020 F-150 Limited and 2021-2026 F-150 Tremor (US models). Fitment confirmed against COBB's published application list.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2017-2026 | Ford | F-150 | 3.5L |
| 2018-2023 | Ford | F-150 | 2.7L |
| 2019-2020 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Tremor |
$1,483.43
Keep those air intake temps down! With Mishimoto's Performance Intercooler for the 2015+ Ford F-150 EcoBoost, your engine will reach a better level of cooling from the help of both an increase in core volume by 77-percent over stock and external fin surface area by 163-percent. We put our core through some grueling tests to see how our design can alleviate the effects of heat soak. With temperature drops averaging 10 degrees under the stock numbers, your F-150 will take in cooler air, providing better performance and increased tuning potential.
Installation Instructions- 163-percent increase in external fin surface area
- 77-percent increase in internal core volume
- 10F (5.5C) reduction in intake air temp
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020-2022 | Ford | Expedition | King Ranch |
| 2018-2022 | Ford | Expedition | Limited |
| 2020-2022 | Ford | Expedition | Max King Ranch |
| 2018-2022 | Ford | Expedition | Max Limited |
| 2018-2022 | Ford | Expedition | Max Platinum |
| 2018-2022 | Ford | Expedition | Max SSV |
| 2018-2019,2022 | Ford | Expedition | Max XL |
| 2018-2022 | Ford | Expedition | Max XLT |
| 2018-2022 | Ford | Expedition | Platinum |
| 2018-2022 | Ford | Expedition | SSV |
| 2022 | Ford | Expedition | Timberline |
| 2018-2019,2022 | Ford | Expedition | XL |
| 2018-2022 | Ford | Expedition | XLT |
| 2015-2026 | Ford | F-150 | King Ranch |
| 2015-2026 | Ford | F-150 | Lariat |
| 2016-2023 | Ford | F-150 | Limited |
| 2015-2026 | Ford | F-150 | Platinum |
| 2018-2026 | Ford | F-150 | Police Responder |
| 2017-2026 | Ford | F-150 | Raptor |
| 2016-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2015-2026 | Ford | F-150 | XL |
| 2015-2026 | Ford | F-150 | XLT |
| 2019-2022 | Lincoln | Navigator | Base |
| 2018-2022 | Lincoln | Navigator | Black Label |
| 2022 | Lincoln | Navigator | L Base |
| 2018-2022 | Lincoln | Navigator | L Black Label |
| 2020-2022 | Lincoln | Navigator | L Livery |
| 2018-2022 | Lincoln | Navigator | L Reserve |
| 2018-2019 | Lincoln | Navigator | L Select |
| 2018 | Lincoln | Navigator | Premiere |
| 2018-2022 | Lincoln | Navigator | Reserve |
| 2018-2019 | Lincoln | Navigator | Select |
Keep those air intake temps down! With Mishimoto's Performance Intercooler for the 2015+ Ford F-150 EcoBoost, your engine will reach a better level of cooling from the help of both an increase in core volume by 77-percent over stock and external fin surface area by 163-percent. We put our core through some grueling tests to see how our design can alleviate the effects of heat soak. With temperature drops averaging 10 degrees under the stock numbers, your F-150 will take in cooler air, providing better performance and increased tuning potential.
Installation Instructions- 163-percent increase in external fin surface area
- 77-percent increase in internal core volume
- 10F (5.5C) reduction in intake air temp
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020-2022 | Ford | Expedition | King Ranch |
| 2018-2022 | Ford | Expedition | Limited |
| 2020-2022 | Ford | Expedition | Max King Ranch |
| 2018-2022 | Ford | Expedition | Max Limited |
| 2018-2022 | Ford | Expedition | Max Platinum |
| 2018-2022 | Ford | Expedition | Max SSV |
| 2018-2019,2022 | Ford | Expedition | Max XL |
| 2018-2022 | Ford | Expedition | Max XLT |
| 2018-2022 | Ford | Expedition | Platinum |
| 2018-2022 | Ford | Expedition | SSV |
| 2022 | Ford | Expedition | Timberline |
| 2018-2019,2022 | Ford | Expedition | XL |
| 2018-2022 | Ford | Expedition | XLT |
| 2015-2026 | Ford | F-150 | King Ranch |
| 2015-2026 | Ford | F-150 | Lariat |
| 2016-2023 | Ford | F-150 | Limited |
| 2015-2026 | Ford | F-150 | Platinum |
| 2018-2026 | Ford | F-150 | Police Responder |
| 2017-2026 | Ford | F-150 | Raptor |
| 2016-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2015-2026 | Ford | F-150 | XL |
| 2015-2026 | Ford | F-150 | XLT |
| 2019-2022 | Lincoln | Navigator | Base |
| 2018-2022 | Lincoln | Navigator | Black Label |
| 2022 | Lincoln | Navigator | L Base |
| 2018-2022 | Lincoln | Navigator | L Black Label |
| 2020-2022 | Lincoln | Navigator | L Livery |
| 2018-2022 | Lincoln | Navigator | L Reserve |
| 2018-2019 | Lincoln | Navigator | L Select |
| 2018 | Lincoln | Navigator | Premiere |
| 2018-2022 | Lincoln | Navigator | Reserve |
| 2018-2019 | Lincoln | Navigator | Select |
$1,499.99
This is the ADD High Mount Intercooler Upgrade Kit, Clocked blow-off valve (BOV) version, for the 2017-2025 Ford F-150 Raptor. It is designed to work with Addictive Desert Designs bumpers for the Ford Raptor and F-150, with a mount layout tuned for frame-cut and winch-mount bumpers.
More airflow. ADD states the improved intercooler flows 8.5% more than the leading competitors in the market. The main assembly is an 18-core design and the whole intercooler is 100% TIG welded.
Built for off-road use. The intercooler sits on a welded steel mounting beam that ADD describes as strong enough for off-road use.
Keeps factory functions. The kit retains all OEM sensors and functions. It includes bracketry to relocate the adaptive cruise control module on the 2015-2017 and 2018-2020 F-150 and the 2017-2020 F-150 Raptor. For the 2021-2023 F-150 (AC19152501NA), 2021-2023 F-150 Raptor (AC2101501NA) and 2024 F-150 Raptor (AC1305101NA), ADD requires its separate adaptive cruise control bracket.
Emissions. CARB compliant under Executive Order D-812.
Not for the Raptor R. ADD states this kit is not compatible with the F-150 Raptor R.
Features
- Clocked BOV version
- 8.5% more flow than the nearest competitor, per ADD
- 18-core intercooler, 100% TIG welded
- Steel mounting beam ready for off-road use
- Mount design optimized for frame-cut and winch-mount bumpers
- Retains all OEM sensors and functions
- CARB compliant, EO D-812
Fitment: 2015-2023 Ford F-150 and 2017-2025 Ford F-150 Raptor (excluding Raptor R). Not compatible with the Raptor R. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
2015-2020 Clocked BOV Install Guide2021-2024 Clocked BOV Install Guide
Installation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2025 | Ford | F-150 | Raptor (excluding Raptor R) |
| 2015-2023 | Ford | F-150 | All trims |
$883.98
The Injen FM9102I is a bar-and-plate front mount intercooler for the 2017-2023 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost. It also fits the 2015-2023 F-150 with the 2.7L or 3.5L EcoBoost. It replaces the factory intercooler with a larger core that cools the charge air more effectively, so the engine keeps making power in heat, when towing and during repeated hard pulls.
A larger core. Injen says the core is about 25 percent larger than stock. The TIG-welded bar-and-plate construction is built for the heat and boost pressure of a turbocharged truck.
Measured gains. Injen claims up to 29 horsepower and 33 lb-ft of torque, backed by a Dynojet chart in the photos.
Complete installation. The kit includes the hardware needed to install it. The shipping weight is about 30 pounds.
Features
- Bar-and-plate core about 25% larger than stock
- TIG-welded construction
- Up to 29 hp and 33 lb-ft claimed
- Mounting hardware included
Emissions
Injen states this product is not currently CARB exempt and is not for sale or use on California-registered vehicles or in other states that follow California rules. Prop 65 warning applies.
Fitment: 2017-2023 Ford F-150 Raptor 3.5L twin-turbo EcoBoost, plus the 2015-2023 F-150 with the 3.5L or 2.7L twin-turbo. Fitment confirmed against Injen's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2023 | Ford | F-150 | Raptor 3.5L twin turbo EcoBoost |
| 2015-2023 | Ford | F-150 | 3.5L twin turbo EcoBoost |
| 2015-2023 | Ford | F-150 | 2.7L twin turbo EcoBoost |
- Choosing a selection results in a full page refresh.
- Opens in a new window.