Welcome to RaptorsOnly.com
-
Brands
Shop by brand
- 3D MAXpider
- Access
- Addictive Desert Designs
- Advan
- AEM Induction
- aFe
- Air Lift
- Airaid
- Alcon
- AlphaRex
- AMP Research
- AMS
- Anderson Composites
- ANZO
- ARB
- Atturo Tire
- AutoMeter
- AVS
- AWE Tuning
- BackRack
- Baer Brakes
- Baja Designs
- BAK
- Banks Power
- BBK
- BBS
- BD Diesel
- Belltech
- Bestop
- BFGoodrich
- BMC
- Body Armor 4x4
- Borla
- Brembo
- Brembo OE
- Bully Dog
- Bushwacker
- Camburg
- Clevite
- COBB
- Cometic Gasket
- COMP Cams
- CORSA Performance
- Covercraft
- CSF
- DBA
- DeatschWerks
- DFC
- Diode Dynamics
- DS18
- DV8 Offroad
- Eaton
- EBC
- Eibach
- Enkei
- Extang
- Fabtech
- Fel-Pro
- fifteen52
- Firestone
- Flowmaster
- Ford Racing
- Forgestar
- FORM Lighting
- FOX
- Garrett
- Gates
- GEN-Y Hitch
- Go Fast Bits
- Go Rhino
- Gram Lights
- Granatelli Motor Sports
- GSC Power Division
- Hawk Performance
- Hella
- Hellwig
- Hotchkis
- Husky Liners
- ICON
- Injen
- J&L
- JBA
- JLT
- K&N Engineering
- KC HiLiTES
- King Engine Bearings
- King Shocks
- Kleinn Air Horns
- Kooks Headers
- KYB
- LIQUI MOLY
- LUND
- Magnaflow
- Mahle OE
- Maxtrac
- Mayhem
- MBRP
- McGard
- Method Wheels
- MGP
- Michelin
- Mickey Thompson
- Mishimoto
- Moog
- Motul
- MTX Wheels
- N-Fab
- Nacho Offroad Technology
- NGK
- Nitrous Express
- Odyssey Battery
- ORACLE Lighting
- PowerStop
- Putco
- QA1
- Raceline
- Radium Engineering
- Rally Armor
- Rampage
- Raxiom
- Retrax
- Rhino-Rack
- Ridetech
- Rigid Industries
- Rival 4x4
- RockJock
- Roll-N-Lock
- Roush
- Royal Purple
- SCT Performance
- Skyjacker
- Snow Performance
- SPC Performance
- SPOD
- Stainless Works
- Superlift
- Superpro
- Timbren
- Torque Solution
- TOYO
- Truxedo
- Tuff Country
- Turbosmart
- UMI Performance
- Undercover
- Volant
- Vossen
- Wagner Tuning
- WeatherTech
- Weld
- Westin
- Whiteline
- Wilwood
- Yokohama Tire
- Yukon Gear & Axle
- Zone Offroad
No brands found. Try another name or initial.
156 brands
View all brands -
F-150 Raptor
- F-150 Raptor
-
1st Gen (2010-2014)
-
2nd Gen (2017-2020)
-
3rd Gen (2021-Present)
-
Raptor R (2023-Present)
-
Bronco Raptor
- Bronco Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
-
Ranger Raptor
- Ranger Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
Your cart
Subheading
Product comparison
Describe you product comparison grid
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
Find wheels and tires that fit your Raptor
Pick your truck and we'll narrow the catalogue to the wheels drilled for your bolt pattern and the tire sizes that fit your rims.
Shopping for
- Bolt pattern
- Hub bore
- Factory tire
365 products
365 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$375.00
$429.00
The Method MR318 is an 18x9 six-lug wheel in machined clear coat, drilled 6x5.5 with a +18 mm offset and 5.66 in backspacing. It is a Standard Series wheel that borrows its look from Method's 412 UTV Bead Grip wheel. Method publishes it as part number MR31889060318.
Design. Method says the 318 takes its design cues from the popular 412 UTV Bead Grip series and brings that look to the light truck market, with clean lines.
6x139.7 (6x5.5) fit for the Ranger Raptor. The 6x5.5 pattern is 6x139.7, the one Ford uses on the 2024-2026 Ranger Raptor. The 106.25 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so hub-centric rings sized from 106.25 mm down to 93.1 mm are needed to center the wheel on the hub.
Wheel only. Lug nuts are not included, so plan on the correct M12x1.5 nuts for the Ranger Raptor.
Features
- Size 18x9, bolt pattern 6x5.5
- Offset +18 mm, backspacing 5.66 in
- Center bore 106.25 mm
- Finish: machined clear coat
- Clean lines taken from the 412 UTV Bead Grip series
Fitment: Method publishes this wheel as 18x9, 6x5.5, +18mm offset, 5.66in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm hub. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; the center bore for this part number is 106.25 mm.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
The Ranger Raptor factory wheel is about +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The ICON Compression in Double Black is a 17 x 8.5 wheel with a 6x5.5 (6x139.7) bolt pattern, a 25mm offset, 5.75in backspacing and a 95.1mm center bore. It is listed here for the 2024-2026 Ford Ranger Raptor, the one Raptor that runs a 6x139.7 pattern.
A bold, concave look. ICON combines sharp lines and a concave spoke design with black rock ring bolts around the lip, in dimensions ICON describes as optimized to improve both the form and function of a Jeep, truck or SUV.
Dimensions tuned for fitment. ICON engineered the Compression to maximize caliper clearance and position the wheel for unhindered suspension travel and steering. The backspacing and offset are set to reduce scrub radius, which ICON says improves handling and ride quality.
Center bore. The 95.1mm bore is larger than the Ranger Raptor's 93.1mm hub, so hub-centric rings are needed to center the wheel on the hub.
Lower offset than factory. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Studs and hardware. The Ranger Raptor uses M12x1.5 lug studs. ICON's page does not list lug nuts with this wheel, so plan to order them separately.
Features
- 17 x 8.5 size, 6x5.5 (6x139.7) bolt pattern, 25mm offset, 5.75in backspacing, 95.1mm bore
- Aluminum alloy construction suited to off-road use, per the supplier listing
- Reduced unsprung weight and rotating mass, per the supplier listing
- Concave spoke design with rock ring bolts
- Double Black finish
- Application-specific dimensions for vehicle dynamics and tire clearance
Fitment: ICON publishes this wheel as 17 x 8.5, 6 x 5.5 with a 25mm offset and 5.75in backspacing and does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor, the only Raptor with a 6x139.7 (6x5.5) bolt pattern and a 93.1mm center bore (the wheel's bore must be equal or larger). Fitment decided by bolt pattern and center bore against Ford's Raptor hub specs. It does not fit the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use 6x135.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$463.24
The Mickey Thompson Classic III is a cast aluminum wheel with the Classic 8-hole design, in a polished finish, sized 17x12, with a 6x5.5 (6x139.7) bolt pattern.
The classic eight-hole look. Mickey Thompson publishes this wheel as 17 x 12 with 3.6 in backspacing and a -74 mm offset. The maker's part number is 277007.
Built for trucks. It uses a 6x5.5 bolt pattern and a 4.26 in (108.2 mm) center bore, which is larger than the Ranger Raptor's 93.1 mm hub, so use hub-centric rings to center it on the hub. Bore per the maker's part page.
Fit notes. The Ranger Raptor's factory wheel is also 17 inch; still check brake and fender clearance for this width and offset. Wheels are not listed with lug nuts by the maker; the Ranger Raptor uses M12x1.5 studs, so confirm the nut seat type with your lug nut supplier.
Features
- Classic 8-hole design
- Polished hand holes to match the finish
- Debossed M/T logo
- Cast aluminum construction (per the maker)
- Net weight 25.08 lb, as listed by the maker
- 6x5.5 (6x139.7) bolt pattern
Fitment: Mickey Thompson publishes this wheel as 17x12, 6x5.5, -74 mm offset, 3.6 in backspacing; it does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor only, decided by bolt pattern (6x139.7) and center bore (108.2 mm, at or above the 93.1 mm hub) against Ford's Raptor hub specs; bore per Mickey Thompson's part page. Fitment is not claimed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use a 6x135 pattern.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$420.00
$605.00
$870.00
The Mayhem Vanquish 8119 in gloss black milled is a 20x9 aluminum wheel drilled for both 6x135 and 6x139.7 lug patterns. That dual drilling lets it bolt onto Ford's 6x135 Raptors (F-150 Raptor, F-150 Raptor R and Bronco Raptor) and onto the 6x139.7 Ranger Raptor.
Specs from Mayhem. Mayhem publishes part number 8119-2937M as a 20x9 wheel with a 0 mm offset, 5 in of backspacing and a 106.1 mm hub bore. The wheel is rated for 2,500 lb per wheel and uses a conical lug seat.
Dual-drill bolt pattern. Mayhem lists the bolt pattern as 6-135 / 6-139.7, which means the wheel carries both sets of lug holes. Your truck uses the set that matches its hub: 6x135 for the F-150 Raptor, F-150 Raptor R and Bronco Raptor, 6x139.7 for the Ranger Raptor.
Hub-centric rings. The 106.1 mm center bore is larger than the hub on every one of these trucks (87.1 mm on the 6x135 Raptors, 93.1 mm on the Ranger Raptor), so the wheel mounts with hub-centric rings sized to your truck's hub.
Lug nuts and center cap. The wheel is sold without lug nuts. The F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 studs and the Ranger Raptor uses M12x1.5, so buy nuts with a conical seat in the right thread. Mayhem lists center cap C108119B01 for this wheel.
Built to carry load. Mayhem describes the line as precision-built from high-quality aluminum alloys, TPMS compatible, and backed by a lifetime structural warranty.
Features
- 20x9, 0 mm offset, 5 in backspacing
- Dual drilled 6x135 / 6x139.7 with a 106.1 mm hub bore
- 2,500 lb load rating per wheel
- Conical lug seat
- Gloss black milled finish
- TPMS compatible
- Lifetime structural warranty
Fitment: Mayhem publishes this wheel as 20x9, 6-135 / 6-139.7, 0 mm offset, 5 in backspacing and does not name vehicles. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x135 with a bore of 87.1 mm or larger for the F-150 Raptor, F-150 Raptor R and Bronco Raptor, and 6x139.7 with a bore of 93.1 mm or larger for the Ranger Raptor. Bore per Mayhem's published spec row for this part number.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. At 0 mm it is lower than the roughly +34 mm factory offset of the F-150 Raptor, F-150 Raptor R and Bronco Raptor, and lower than the +55 mm factory offset of the Ranger Raptor.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
| 2024-2026 | Ford | Ranger | Raptor |
The Mayhem Vanquish 8119 in gloss black is a 22x10 aluminum wheel drilled for both 6x135 and 6x139.7 lug patterns. That dual drilling lets it bolt onto Ford's 6x135 Raptors (F-150 Raptor, F-150 Raptor R and Bronco Raptor) and onto the 6x139.7 Ranger Raptor.
Specs from Mayhem. Mayhem publishes part number 8119-22137GB as a 22x10 wheel with a -19 mm offset, 4.75 in of backspacing and a 106.1 mm hub bore. The wheel is rated for 2,500 lb per wheel and uses a conical lug seat.
Dual-drill bolt pattern. Mayhem lists the bolt pattern as 6-135 / 6-139.7, which means the wheel carries both sets of lug holes. Your truck uses the set that matches its hub: 6x135 for the F-150 Raptor, F-150 Raptor R and Bronco Raptor, 6x139.7 for the Ranger Raptor.
Hub-centric rings. The 106.1 mm center bore is larger than the hub on every one of these trucks (87.1 mm on the 6x135 Raptors, 93.1 mm on the Ranger Raptor), so the wheel mounts with hub-centric rings sized to your truck's hub.
Lug nuts and center cap. The wheel is sold without lug nuts. The F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 studs and the Ranger Raptor uses M12x1.5, so buy nuts with a conical seat in the right thread. Mayhem lists center cap C108119B01 for this wheel.
Built to carry load. Mayhem describes the line as precision-built from high-quality aluminum alloys, TPMS compatible, and backed by a lifetime structural warranty.
Features
- 22x10, -19 mm offset, 4.75 in backspacing
- Dual drilled 6x135 / 6x139.7 with a 106.1 mm hub bore
- 2,500 lb load rating per wheel
- Conical lug seat
- Gloss black finish
- TPMS compatible
- Lifetime structural warranty
Fitment: Mayhem publishes this wheel as 22x10, 6-135 / 6-139.7, -19 mm offset, 4.75 in backspacing and does not name vehicles. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x135 with a bore of 87.1 mm or larger for the F-150 Raptor, F-150 Raptor R and Bronco Raptor, and 6x139.7 with a bore of 93.1 mm or larger for the Ranger Raptor. Bore per Mayhem's published spec row for this part number.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. At -19 mm it is far lower than the roughly +34 mm factory offset of the F-150 Raptor, F-150 Raptor R and Bronco Raptor, and lower than the +55 mm factory offset of the Ranger Raptor.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
| 2024-2026 | Ford | Ranger | Raptor |
The Mayhem 8307 Convoy is a 17x9 satin black wheel drilled 6x139.7 (Mayhem writes it 6-139.7), made for trucks, Jeeps and SUVs. This listing is part number 8307-7983MB: -6 mm offset, 4.76 in backspacing and a 106 mm center bore.
Rated for work. Mayhem's spec table lists this size at 2500 lb per wheel, and the brand describes its wheels as built for high load ratings and a wide range of custom fitments.
Specifications from the maker. Size 17x9, bolt pattern 6-139.7, offset -6 mm, hub bore 106 mm, load rating 2500 lb, backspacing 4.76 in, conical lug seat. Mayhem lists center cap C108307MB03 for this wheel. The wheel is sold on its own; lug nuts are not included.
Features
- 17x9 satin black wheel, part number 8307-7983MB
- 6x139.7 bolt pattern with a 106 mm center bore
- -6 mm offset and 4.76 in backspacing
- 2500 lb load rating per wheel (Mayhem spec table)
- Conical lug seat
Fitment: Mayhem publishes this wheel as 17x9, 6-139.7 (6x139.7), -6 mm offset, 4.76 in backspacing and a 106 mm center bore, and does not name vehicles. It is listed here for the 2024-2026 Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per Mayhem's spec table. It is not listed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which are 6x135. The Ranger Raptor uses M12x1.5 lug nuts and this wheel has a conical seat. The 106 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so use hub-centric rings (106 mm outside, 93.1 mm inside) to center the wheel on the hub.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor wheel is +55 mm; this one is -6 mm.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$272.00
The Mayhem 8307 Convoy is a 17x9 satin black wheel drilled 6x135 (Mayhem writes it 6-135), made for trucks, Jeeps and SUVs. This listing is part number 8307-7936MB: -6 mm offset, 4.76 in backspacing and an 87.1 mm center bore.
Rated for work. Mayhem's spec table lists this size at 2500 lb per wheel, and the brand describes its wheels as built for high load ratings and a wide range of custom fitments.
Specifications from the maker. Size 17x9, bolt pattern 6-135, offset -6 mm, hub bore 87.1 mm, load rating 2500 lb, backspacing 4.76 in, conical lug seat. Mayhem lists center cap C108307MB03 for this wheel. The wheel is sold on its own; lug nuts are not included.
Features
- 17x9 satin black wheel, part number 8307-7936MB
- 6x135 bolt pattern with an 87.1 mm center bore
- -6 mm offset and 4.76 in backspacing
- 2500 lb load rating per wheel (Mayhem spec table)
- Conical lug seat
Fitment: Mayhem publishes this wheel as 17x9, 6-135 (6x135), -6 mm offset, 4.76 in backspacing and an 87.1 mm center bore, and does not name vehicles. It is listed here for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore: the 2017-2026 F-150 Raptor, the 2023-2026 F-150 Raptor R and the 2022-2026 Bronco Raptor. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per Mayhem's spec table. Those trucks use M14x1.5 lug nuts and this wheel has a conical seat. The 87.1 mm bore matches the Raptor hub, so no hub rings are needed. This listing does not claim the 2010-2014 SVT Raptor or the Ranger Raptor (6x139.7).
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory F-150 Raptor, F-150 Raptor R and Bronco Raptor wheel is about +34 mm; this one is -6 mm.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
The Mayhem 8306 Ridgeline is a 17x8.5 satin black wheel drilled 6x139.7 (Mayhem writes it 6-139.7), made for trucks, Jeeps and SUVs. This listing is part number 8306-7883MB: -6 mm offset, 4.51 in backspacing and a 106.1 mm center bore.
Rated for work. Mayhem's spec table lists this size at 2500 lb per wheel, and the brand describes its wheels as built for high load ratings and a wide range of custom fitments.
Specifications from the maker. Size 17x8.5, bolt pattern 6-139.7, offset -6 mm, hub bore 106.1 mm, load rating 2500 lb, backspacing 4.51 in, conical lug seat. Mayhem lists center cap C10830602MB for this wheel. The wheel is sold on its own; lug nuts are not included.
Features
- 17x8.5 satin black wheel, part number 8306-7883MB
- 6x139.7 bolt pattern with a 106.1 mm center bore
- -6 mm offset and 4.51 in backspacing
- 2500 lb load rating per wheel (Mayhem spec table)
- Conical lug seat
Fitment: Mayhem publishes this wheel as 17x8.5, 6-139.7 (6x139.7), -6 mm offset, 4.51 in backspacing and a 106.1 mm center bore, and does not name vehicles. It is listed here for the 2024-2026 Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per Mayhem's spec table. It is not listed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which are 6x135. The Ranger Raptor uses M12x1.5 lug nuts and this wheel has a conical seat. The 106.1 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so use hub-centric rings (106.1 mm outside, 93.1 mm inside) to center the wheel on the hub.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor wheel is +55 mm; this one is -6 mm.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The Mayhem 8015 Warrior in matte black is an 18x9 aluminum wheel drilled for both 6x135 and 6x139.7 lug patterns. That dual drilling lets it bolt onto Ford's 6x135 Raptors (F-150 Raptor, F-150 Raptor R and Bronco Raptor) and onto the 6x139.7 Ranger Raptor.
Specs from Mayhem. Mayhem publishes part number 8015-8937MB18 as an 18x9 wheel with a +18 mm offset, 5.71 in of backspacing and a 106 mm hub bore. The wheel is rated for 2,500 lb per wheel and uses a conical lug seat.
Dual-drill bolt pattern. Mayhem lists the bolt pattern as 6-135 / 6-139.7, which means the wheel carries both sets of lug holes. Your truck uses the set that matches its hub: 6x135 for the F-150 Raptor, F-150 Raptor R and Bronco Raptor, 6x139.7 for the Ranger Raptor.
Hub-centric rings. The 106 mm center bore is larger than the hub on every one of these trucks (87.1 mm on the 6x135 Raptors, 93.1 mm on the Ranger Raptor), so the wheel mounts with hub-centric rings sized to your truck's hub.
Lug nuts and center cap. The wheel is sold without lug nuts. The F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 studs and the Ranger Raptor uses M12x1.5, so buy nuts with a conical seat in the right thread. Mayhem lists center cap C108010MB01 for this wheel.
Built to carry load. Mayhem describes the line as precision-built from high-quality aluminum alloys, TPMS compatible, and backed by a lifetime structural warranty.
Features
- 18x9, +18 mm offset, 5.71 in backspacing
- Dual drilled 6x135 / 6x139.7 with a 106 mm hub bore
- 2,500 lb load rating per wheel
- Conical lug seat
- Matte black finish
- TPMS compatible
- Lifetime structural warranty
Fitment: Mayhem publishes this wheel as 18x9, 6-135 / 6-139.7, +18 mm offset, 5.71 in backspacing and does not name vehicles. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x135 with a bore of 87.1 mm or larger for the F-150 Raptor, F-150 Raptor R and Bronco Raptor, and 6x139.7 with a bore of 93.1 mm or larger for the Ranger Raptor. Bore per Mayhem's published spec row for this part number.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. At +18 mm it is lower than the roughly +34 mm factory offset of the F-150 Raptor, F-150 Raptor R and Bronco Raptor, and lower than the +55 mm factory offset of the Ranger Raptor.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
| 2024-2026 | Ford | Ranger | Raptor |
The Mayhem 8090 Rampage in matte black is an 18x9 aluminum wheel drilled for both 6x135 and 6x139.7 lug patterns. That dual drilling lets it bolt onto Ford's 6x135 Raptors (F-150 Raptor, F-150 Raptor R and Bronco Raptor) and onto the 6x139.7 Ranger Raptor.
Specs from Mayhem. Mayhem publishes part number 8090-8937MB18 as an 18x9 wheel with a +18 mm offset, 5.71 in of backspacing and a 106 mm hub bore. The wheel is rated for 2,500 lb per wheel and uses a conical lug seat.
Dual-drill bolt pattern. Mayhem lists the bolt pattern as 6-135 / 6-139.7, which means the wheel carries both sets of lug holes. Your truck uses the set that matches its hub: 6x135 for the F-150 Raptor, F-150 Raptor R and Bronco Raptor, 6x139.7 for the Ranger Raptor.
Hub-centric rings. The 106 mm center bore is larger than the hub on every one of these trucks (87.1 mm on the 6x135 Raptors, 93.1 mm on the Ranger Raptor), so the wheel mounts with hub-centric rings sized to your truck's hub.
Lug nuts and center cap. The wheel is sold without lug nuts. The F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 studs and the Ranger Raptor uses M12x1.5, so buy nuts with a conical seat in the right thread. Mayhem lists center cap C108010MB01 for this wheel.
Built to carry load. Mayhem describes the line as precision-built from high-quality aluminum alloys, TPMS compatible, and backed by a lifetime structural warranty.
Features
- 18x9, +18 mm offset, 5.71 in backspacing
- Dual drilled 6x135 / 6x139.7 with a 106 mm hub bore
- 2,500 lb load rating per wheel
- Conical lug seat
- Matte black finish
- TPMS compatible
- Lifetime structural warranty
Fitment: Mayhem publishes this wheel as 18x9, 6-135 / 6-139.7, +18 mm offset, 5.71 in backspacing and does not name vehicles. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x135 with a bore of 87.1 mm or larger for the F-150 Raptor, F-150 Raptor R and Bronco Raptor, and 6x139.7 with a bore of 93.1 mm or larger for the Ranger Raptor. Bore per Mayhem's published spec row for this part number.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. At +18 mm it is lower than the roughly +34 mm factory offset of the F-150 Raptor, F-150 Raptor R and Bronco Raptor, and lower than the +55 mm factory offset of the Ranger Raptor.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
| 2024-2026 | Ford | Ranger | Raptor |
The Mayhem 8310 Vector is a 20x9 gloss black wheel drilled 6x139.7 (Mayhem writes it 6-139.7), with a simulated beadlock ring. This listing is part number 8310-2983GB: 18 mm offset, 5.71 in backspacing and a 106 mm center bore.
Trail-ready look. Mayhem describes the Vector as an in-your-face design paired with a simulated beadlock ring, designed for the trail. The ring is a styling feature, not a true beadlock. The maker also lists the line as TPMS compatible and covered by a lifetime structural warranty.
Specifications from the maker. Size 20x9, bolt pattern 6-139.7, offset 18 mm, hub bore 106 mm, load rating 2500 lb, backspacing 5.71 in, conical lug seat. Mayhem lists center cap C108303B03 for this wheel. The wheel is sold on its own; lug nuts are not included.
Features
- 20x9 gloss black wheel, part number 8310-2983GB
- Simulated beadlock ring
- 6x139.7 bolt pattern with a 106 mm center bore
- 18 mm offset and 5.71 in backspacing
- 2500 lb load rating per wheel (Mayhem spec table)
- Conical lug seat
- TPMS compatible
- Lifetime structural warranty
Fitment: Mayhem publishes this wheel as 20x9, 6-139.7 (6x139.7), 18 mm offset, 5.71 in backspacing and a 106 mm center bore, and does not name vehicles. It is listed here for the 2024-2026 Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per Mayhem's spec table. It is not listed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which are 6x135. The Ranger Raptor uses M12x1.5 lug nuts and this wheel has a conical seat. The 106 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so use hub-centric rings (106 mm outside, 93.1 mm inside) to center the wheel on the hub.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor wheel is +55 mm; this one is +18 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The Mayhem 8121 Cyclone is a 20x9 gloss black wheel drilled 6x139.7 (Mayhem writes it 6-139.7), built for trucks, Jeeps and SUVs. This listing is part number 8121-2983GB0: 0 mm offset, 5 in backspacing and a 106 mm center bore.
Built from quality alloy. Mayhem makes its wheels from high-quality aluminum alloys and lists this size at 2500 lb per wheel. The maker also lists the line as TPMS compatible and covered by a lifetime structural warranty.
Specifications from the maker. Size 20x9, bolt pattern 6-139.7, offset 0 mm, hub bore 106 mm, load rating 2500 lb, backspacing 5 in, conical lug seat. Mayhem lists center cap C108303B02 for this wheel. The wheel is sold on its own; lug nuts are not included.
Features
- 20x9 gloss black wheel, part number 8121-2983GB0
- 6x139.7 bolt pattern with a 106 mm center bore
- 0 mm offset and 5 in backspacing
- 2500 lb load rating per wheel (Mayhem spec table)
- Conical lug seat
- TPMS compatible
- Lifetime structural warranty
Fitment: Mayhem publishes this wheel as 20x9, 6-139.7 (6x139.7), 0 mm offset, 5 in backspacing and a 106 mm center bore, and does not name vehicles. It is listed here for the 2024-2026 Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per Mayhem's spec table. It is not listed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which are 6x135. The Ranger Raptor uses M12x1.5 lug nuts and this wheel has a conical seat. The 106 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so use hub-centric rings (106 mm outside, 93.1 mm inside) to center the wheel on the hub.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor wheel is +55 mm; this one is 0 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The Mayhem 8121 Cyclone is a 22x10 gloss black wheel drilled 6x139.7 (Mayhem writes it 6-139.7), built for trucks, Jeeps and SUVs. This listing is part number 8121-22183GB-19: -19 mm offset, 4.75 in backspacing and a 106 mm center bore.
Built from quality alloy. Mayhem makes its wheels from high-quality aluminum alloys and lists this size at 2500 lb per wheel. The maker also lists the line as TPMS compatible and covered by a lifetime structural warranty.
Specifications from the maker. Size 22x10, bolt pattern 6-139.7, offset -19 mm, hub bore 106 mm, load rating 2500 lb, backspacing 4.75 in, conical lug seat. Mayhem lists center cap C108303B02 for this wheel. The wheel is sold on its own; lug nuts are not included.
Features
- 22x10 gloss black wheel, part number 8121-22183GB-19
- 6x139.7 bolt pattern with a 106 mm center bore
- -19 mm offset and 4.75 in backspacing
- 2500 lb load rating per wheel (Mayhem spec table)
- Conical lug seat
- TPMS compatible
- Lifetime structural warranty
Fitment: Mayhem publishes this wheel as 22x10, 6-139.7 (6x139.7), -19 mm offset, 4.75 in backspacing and a 106 mm center bore, and does not name vehicles. It is listed here for the 2024-2026 Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per Mayhem's spec table. It is not listed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which are 6x135. The Ranger Raptor uses M12x1.5 lug nuts and this wheel has a conical seat. The 106 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so use hub-centric rings (106 mm outside, 93.1 mm inside) to center the wheel on the hub.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor wheel is +55 mm; this one is -19 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The Mayhem 8120 Horizon is a 20x9 gloss black wheel drilled 6x139.7 (Mayhem writes it 6-139.7), built for trucks, Jeeps and SUVs. This listing is part number 8120-2983GB18: 18 mm offset, 5.71 in backspacing and a 106 mm center bore.
Built from quality alloy. Mayhem makes its wheels from high-quality aluminum alloys and lists this size at 2500 lb per wheel. The maker also lists the line as TPMS compatible and covered by a lifetime structural warranty.
Specifications from the maker. Size 20x9, bolt pattern 6-139.7, offset 18 mm, hub bore 106 mm, load rating 2500 lb, backspacing 5.71 in, conical lug seat. Mayhem lists center cap C108120B for this wheel. The wheel is sold on its own; lug nuts are not included.
Features
- 20x9 gloss black wheel, part number 8120-2983GB18
- 6x139.7 bolt pattern with a 106 mm center bore
- 18 mm offset and 5.71 in backspacing
- 2500 lb load rating per wheel (Mayhem spec table)
- Conical lug seat
- TPMS compatible
- Lifetime structural warranty
Fitment: Mayhem publishes this wheel as 20x9, 6-139.7 (6x139.7), 18 mm offset, 5.71 in backspacing and a 106 mm center bore, and does not name vehicles. It is listed here for the 2024-2026 Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per Mayhem's spec table. It is not listed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which are 6x135. The Ranger Raptor uses M12x1.5 lug nuts and this wheel has a conical seat. The 106 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so use hub-centric rings (106 mm outside, 93.1 mm inside) to center the wheel on the hub.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor wheel is +55 mm; this one is +18 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The Mayhem 8120 Horizon in gloss black is a 20x9 aluminum wheel drilled 6x139.7 (6x5.5). Of Ford's Raptors that pattern belongs to the 2024-2026 Ranger Raptor, so that is the truck this wheel is listed for.
Specs from Mayhem. Mayhem publishes part number 8120-2983GB0 as a 20x9 wheel with a 0 mm offset, 5 in of backspacing and a 106 mm hub bore. The wheel is rated for 2,500 lb per wheel and uses a conical lug seat.
Bolt pattern. Mayhem lists a single 6-139.7 bolt pattern. The F-150 Raptor, F-150 Raptor R and Bronco Raptor are 6x135 trucks, so this wheel is not listed for them.
Hub-centric rings. The 106 mm center bore is larger than the Ranger Raptor's 93.1 mm hub, so the wheel mounts with hub-centric rings sized to the truck's hub.
Lug nuts and center cap. The wheel is sold without lug nuts. The Ranger Raptor uses M12x1.5 studs, so buy nuts with a conical seat in that thread. Mayhem lists center cap C108120B for this wheel.
Built to carry load. Mayhem describes the line as precision-built from high-quality aluminum alloys, TPMS compatible, and backed by a lifetime structural warranty.
Features
- 20x9, 0 mm offset, 5 in backspacing
- 6x139.7 bolt pattern with a 106 mm hub bore
- 2,500 lb load rating per wheel
- Conical lug seat
- Gloss black finish
- TPMS compatible
- Lifetime structural warranty
Fitment: Mayhem publishes this wheel as 20x9, 6-139.7, 0 mm offset, 5 in backspacing and does not name vehicles. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x139.7 with a bore of 93.1 mm or larger for the Ranger Raptor. Bore per Mayhem's published spec row for this part number.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. At 0 mm it is lower than the +55 mm factory offset of the Ranger Raptor.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$449.00
The BBS TS-R is a 18x9 off-road wheel in Satin Silver, drilled 6x139.7 (6x5.5) with a 106.1 mm center bore and a 0mm offset. We list it for the 2024-2026 Ford Ranger Raptor, the Raptor that uses the 6x139.7 bolt pattern.
What BBS publishes. BBS's TS-R Applications PDF lists this wheel (part number TS-R189084P0003) as 18 inch diameter, 9 inch width, 6x139.7, 106.1 center bore, 0 offset, Satin Silver, with a load figure of 2500 lb. BBS introduces its TS wheels as 17, 18 and 20 inch off-road wheels for trucks and SUVs.
Backspacing (computed). BBS does not publish backspacing. Computed from the 9 inch width and the 0mm offset (width / 2 + offset / 25.4), it is about 4.5 in.
Center bore and hub rings. The 106.1 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so this wheel needs hub-centric rings (93.1 mm to 106.1 mm) to center it on the hub. Rings are not included.
Offset. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor offset is +55 mm; this wheel is 0mm.
Lug nuts. Lug nuts are not included. The Ranger Raptor uses M12x1.5 studs, and BBS does not state a lug seat type for this wheel, so confirm the correct nuts before installing.
Warranty. BBS's warranty page states that structural manufacturing defects are covered for 10 years and the painted finish for 2 years. The warranty is void after impact damage, if the wheel is altered, or if the application is not approved by BBS.
Features
- 18x9 with 6x139.7 bolt pattern and 106.1 mm center bore
- 0mm offset, about 4.5 in computed backspacing
- Satin Silver finish
- Load figure of 2500 lb in BBS's Application PDF
- BBS TS series off-road wheel for trucks and SUVs
- 10-year structural and 2-year finish warranty
- BBS part number: TS-R189084P0003
Fitment: BBS publishes this wheel's specifications (size, bolt pattern, center bore, offset) but no vehicle list for its off-road wheels. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x139.7 with a bore of at least 93.1 mm fits the 2024-2026 Ranger Raptor only. Bore per BBS Application PDF. Check brake, fender and suspension clearance before ordering.
Guides & Manuals
TS-R Applications PDFThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$399.00
The BBS TS-R is a 17x9 off-road wheel in Satin Silver, drilled 6x135 with an 87.1 mm center bore and a 0mm offset. We list it for the Ford Raptors that share the 6x135 bolt pattern and 87.1 mm hub: the 2017-2026 F-150 Raptor, the 2023-2026 F-150 Raptor R and the 2022-2026 Bronco Raptor.
What BBS publishes. BBS's TS-R Applications PDF lists this wheel (part number TS-R179089P0003) as 17 inch diameter, 9 inch width, 6x135, 87.1 center bore, 0 offset, Satin Silver, with a load figure of 2500 lb. BBS introduces its TS wheels as 17, 18 and 20 inch off-road wheels for trucks and SUVs.
Backspacing (computed). BBS does not publish backspacing. Computed from the 9 inch width and the 0mm offset (width / 2 + offset / 25.4), it is about 4.5 in.
Made to match the Raptor hub. BBS lists this wheel with a 6x135 bolt pattern and an 87.1 mm center bore. That is the pattern and hub size Ford uses on these trucks, so the wheel centers on the hub without adapters.
Offset. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on these trucks is about +34 mm; this wheel is 0mm.
Lug nuts. Lug nuts are not part of BBS's listing for this wheel. The F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 lug studs, and BBS does not state a lug seat type for this wheel, so choose nuts to match that thread and confirm the seat before installing.
Warranty. BBS's warranty page states that structural manufacturing defects are covered for 10 years and the painted finish for 2 years. The warranty is void after impact damage, if the wheel is altered, or if the application is not approved by BBS.
Features
- 17x9 with 6x135 bolt pattern and 87.1 mm center bore
- 0mm offset, about 4.5 in computed backspacing
- Satin Silver finish
- Load figure of 2500 lb in BBS's Application PDF
- BBS TS series off-road wheel for trucks and SUVs
- 10-year structural and 2-year finish warranty
- BBS part number: TS-R179089P0003
Fitment: BBS publishes this wheel's specifications (size, bolt pattern, center bore, offset) but no vehicle list for its off-road wheels. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x135 with a bore of at least 87.1 mm fits the F-150 Raptor, F-150 Raptor R and Bronco Raptor. Bore per BBS Application PDF. Check brake, fender and suspension clearance before ordering.
Guides & Manuals
TS-R Applications PDFThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$399.00
The BBS TS-R is a 17x9 off-road wheel in Satin Silver, drilled 6x139.7 (6x5.5) with a 106.1 mm center bore and a 0mm offset. We list it for the 2024-2026 Ford Ranger Raptor, the Raptor that uses the 6x139.7 bolt pattern.
What BBS publishes. BBS's TS-R Applications PDF lists this wheel (part number TS-R179084P0003) as 17 inch diameter, 9 inch width, 6x139.7, 106.1 center bore, 0 offset, Satin Silver, with a load figure of 2500 lb. BBS introduces its TS wheels as 17, 18 and 20 inch off-road wheels for trucks and SUVs.
Backspacing (computed). BBS does not publish backspacing. Computed from the 9 inch width and the 0mm offset (width / 2 + offset / 25.4), it is about 4.5 in.
Center bore and hub rings. The 106.1 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so this wheel needs hub-centric rings (93.1 mm to 106.1 mm) to center it on the hub. Rings are not included.
Offset. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor offset is +55 mm; this wheel is 0mm.
Lug nuts. Lug nuts are not included. The Ranger Raptor uses M12x1.5 studs, and BBS does not state a lug seat type for this wheel, so confirm the correct nuts before installing.
Warranty. BBS's warranty page states that structural manufacturing defects are covered for 10 years and the painted finish for 2 years. The warranty is void after impact damage, if the wheel is altered, or if the application is not approved by BBS.
Features
- 17x9 with 6x139.7 bolt pattern and 106.1 mm center bore
- 0mm offset, about 4.5 in computed backspacing
- Satin Silver finish
- Load figure of 2500 lb in BBS's Application PDF
- BBS TS series off-road wheel for trucks and SUVs
- 10-year structural and 2-year finish warranty
- BBS part number: TS-R179084P0003
Fitment: BBS publishes this wheel's specifications (size, bolt pattern, center bore, offset) but no vehicle list for its off-road wheels. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x139.7 with a bore of at least 93.1 mm fits the 2024-2026 Ranger Raptor only. Bore per BBS Application PDF. Check brake, fender and suspension clearance before ordering.
Guides & Manuals
TS-R Applications PDFThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$549.00
The BBS TS-P is a 20x9 off-road wheel in Satin Silver, drilled 6x135 with an 87.1 mm center bore and a 12mm offset. We list it for the Ford Raptors that share the 6x135 bolt pattern and 87.1 mm hub: the 2017-2026 F-150 Raptor, the 2023-2026 F-150 Raptor R and the 2022-2026 Bronco Raptor.
What BBS publishes. BBS's TS-P Applications PDF lists this wheel (part number TS-P209089P1203) as 20 inch diameter, 9 inch width, 6x135, 87.1 center bore, 12 offset, Satin Silver, with a load figure of 2500 lb. BBS introduces its TS wheels as 17, 18 and 20 inch off-road wheels for trucks and SUVs.
Backspacing (computed). BBS does not publish backspacing. Computed from the 9 inch width and the 12mm offset (width / 2 + offset / 25.4), it is about 4.97 in.
Made to match the Raptor hub. BBS lists this wheel with a 6x135 bolt pattern and an 87.1 mm center bore. That is the pattern and hub size Ford uses on these trucks, so the wheel centers on the hub without adapters.
Offset. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on these trucks is about +34 mm; this wheel is +12mm.
Lug nuts. Lug nuts are not part of BBS's listing for this wheel. The F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 lug studs, and BBS does not state a lug seat type for this wheel, so choose nuts to match that thread and confirm the seat before installing.
Warranty. BBS's warranty page states that structural manufacturing defects are covered for 10 years and the painted finish for 2 years. The warranty is void after impact damage, if the wheel is altered, or if the application is not approved by BBS.
Features
- 20x9 with 6x135 bolt pattern and 87.1 mm center bore
- 12mm offset, about 4.97 in computed backspacing
- Satin Silver finish
- Load figure of 2500 lb in BBS's Application PDF
- BBS TS series off-road wheel for trucks and SUVs
- 10-year structural and 2-year finish warranty
- BBS part number: TS-P209089P1203
Fitment: BBS publishes this wheel's specifications (size, bolt pattern, center bore, offset) but no vehicle list for its off-road wheels. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x135 with a bore of at least 87.1 mm fits the F-150 Raptor, F-150 Raptor R and Bronco Raptor. Bore per BBS Application PDF. Check brake, fender and suspension clearance before ordering.
Guides & Manuals
TS-P Applications PDFThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$549.00
The BBS TS-P is a 20x9 off-road wheel in Satin Bronze, drilled 6x135 with an 87.1 mm center bore and a 12mm offset. We list it for the Ford Raptors that share the 6x135 bolt pattern and 87.1 mm hub: the 2017-2026 F-150 Raptor, the 2023-2026 F-150 Raptor R and the 2022-2026 Bronco Raptor.
What BBS publishes. BBS's TS-P Applications PDF lists this wheel (part number TS-P209089P1202) as 20 inch diameter, 9 inch width, 6x135, 87.1 center bore, 12 offset, Satin Bronze, with a load figure of 2500 lb. BBS introduces its TS wheels as 17, 18 and 20 inch off-road wheels for trucks and SUVs.
Backspacing (computed). BBS does not publish backspacing. Computed from the 9 inch width and the 12mm offset (width / 2 + offset / 25.4), it is about 4.97 in.
Made to match the Raptor hub. BBS lists this wheel with a 6x135 bolt pattern and an 87.1 mm center bore. That is the pattern and hub size Ford uses on these trucks, so the wheel centers on the hub without adapters.
Offset. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on these trucks is about +34 mm; this wheel is +12mm.
Lug nuts. Lug nuts are not part of BBS's listing for this wheel. The F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 lug studs, and BBS does not state a lug seat type for this wheel, so choose nuts to match that thread and confirm the seat before installing.
Warranty. BBS's warranty page states that structural manufacturing defects are covered for 10 years and the painted finish for 2 years. The warranty is void after impact damage, if the wheel is altered, or if the application is not approved by BBS.
Features
- 20x9 with 6x135 bolt pattern and 87.1 mm center bore
- 12mm offset, about 4.97 in computed backspacing
- Satin Bronze finish
- Load figure of 2500 lb in BBS's Application PDF
- BBS TS series off-road wheel for trucks and SUVs
- 10-year structural and 2-year finish warranty
- BBS part number: TS-P209089P1202
Fitment: BBS publishes this wheel's specifications (size, bolt pattern, center bore, offset) but no vehicle list for its off-road wheels. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x135 with a bore of at least 87.1 mm fits the F-150 Raptor, F-150 Raptor R and Bronco Raptor. Bore per BBS Application PDF. Check brake, fender and suspension clearance before ordering.
Guides & Manuals
TS-P Applications PDFThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$549.00
The BBS TS-P is a 20x9 off-road wheel in Satin Black, drilled 6x135 with an 87.1 mm center bore and a 12mm offset. We list it for the Ford Raptors that share the 6x135 bolt pattern and 87.1 mm hub: the 2017-2026 F-150 Raptor, the 2023-2026 F-150 Raptor R and the 2022-2026 Bronco Raptor.
What BBS publishes. BBS's TS-P Applications PDF lists this wheel (part number TS-P209089P1201) as 20 inch diameter, 9 inch width, 6x135, 87.1 center bore, 12 offset, Satin Black, with a load figure of 2500 lb. BBS introduces its TS wheels as 17, 18 and 20 inch off-road wheels for trucks and SUVs.
Backspacing (computed). BBS does not publish backspacing. Computed from the 9 inch width and the 12mm offset (width / 2 + offset / 25.4), it is about 4.97 in.
Made to match the Raptor hub. BBS lists this wheel with a 6x135 bolt pattern and an 87.1 mm center bore. That is the pattern and hub size Ford uses on these trucks, so the wheel centers on the hub without adapters.
Offset. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on these trucks is about +34 mm; this wheel is +12mm.
Lug nuts. Lug nuts are not part of BBS's listing for this wheel. The F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 lug studs, and BBS does not state a lug seat type for this wheel, so choose nuts to match that thread and confirm the seat before installing.
Warranty. BBS's warranty page states that structural manufacturing defects are covered for 10 years and the painted finish for 2 years. The warranty is void after impact damage, if the wheel is altered, or if the application is not approved by BBS.
Features
- 20x9 with 6x135 bolt pattern and 87.1 mm center bore
- 12mm offset, about 4.97 in computed backspacing
- Satin Black finish
- Load figure of 2500 lb in BBS's Application PDF
- BBS TS series off-road wheel for trucks and SUVs
- 10-year structural and 2-year finish warranty
- BBS part number: TS-P209089P1201
Fitment: BBS publishes this wheel's specifications (size, bolt pattern, center bore, offset) but no vehicle list for its off-road wheels. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x135 with a bore of at least 87.1 mm fits the F-150 Raptor, F-150 Raptor R and Bronco Raptor. Bore per BBS Application PDF. Check brake, fender and suspension clearance before ordering.
Guides & Manuals
TS-P Applications PDFThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$449.00
The BBS TS-P is a 18x9 off-road wheel in Satin Silver, drilled 6x139.7 (6x5.5) with a 106.1 mm center bore and a 0mm offset. We list it for the 2024-2026 Ford Ranger Raptor, the Raptor that uses the 6x139.7 bolt pattern.
What BBS publishes. BBS's TS-P Applications PDF lists this wheel (part number TS-P189084P0003) as 18 inch diameter, 9 inch width, 6x139.7, 106.1 center bore, 0 offset, Satin Silver, with a load figure of 2500 lb. BBS introduces its TS wheels as 17, 18 and 20 inch off-road wheels for trucks and SUVs.
Backspacing (computed). BBS does not publish backspacing. Computed from the 9 inch width and the 0mm offset (width / 2 + offset / 25.4), it is about 4.5 in.
Center bore and hub rings. The 106.1 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so this wheel needs hub-centric rings (93.1 mm to 106.1 mm) to center it on the hub. Rings are not included.
Offset. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor offset is +55 mm; this wheel is 0mm.
Lug nuts. Lug nuts are not included. The Ranger Raptor uses M12x1.5 studs, and BBS does not state a lug seat type for this wheel, so confirm the correct nuts before installing.
Warranty. BBS's warranty page states that structural manufacturing defects are covered for 10 years and the painted finish for 2 years. The warranty is void after impact damage, if the wheel is altered, or if the application is not approved by BBS.
Features
- 18x9 with 6x139.7 bolt pattern and 106.1 mm center bore
- 0mm offset, about 4.5 in computed backspacing
- Satin Silver finish
- Load figure of 2500 lb in BBS's Application PDF
- BBS TS series off-road wheel for trucks and SUVs
- 10-year structural and 2-year finish warranty
- BBS part number: TS-P189084P0003
Fitment: BBS publishes this wheel's specifications (size, bolt pattern, center bore, offset) but no vehicle list for its off-road wheels. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x139.7 with a bore of at least 93.1 mm fits the 2024-2026 Ranger Raptor only. Bore per BBS Application PDF. Check brake, fender and suspension clearance before ordering.
Guides & Manuals
TS-P Applications PDFThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$399.00
The BBS TS-P is a 17x9 off-road wheel in Satin Silver, drilled 6x135 with a 87.1 mm center bore and a 0mm offset. We list it for the Ford Raptors that share the 6x135 bolt pattern and 87.1 mm hub: the 2017-2026 F-150 Raptor, the 2023-2026 F-150 Raptor R and the 2022-2026 Bronco Raptor.
What BBS publishes. BBS's TS-P Applications PDF lists this wheel (part number TS-P179089P0003) as 17 inch diameter, 9 inch width, 6x135, 87.1 center bore, 0 offset, Satin Silver, with a load figure of 2500 lb. BBS introduces its TS wheels as 17, 18 and 20 inch off-road wheels for trucks and SUVs.
Backspacing (computed). BBS does not publish backspacing. Computed from the 9 inch width and the 0mm offset (width / 2 + offset / 25.4), it is about 4.5 in.
Made to match the Raptor hub. BBS lists this wheel with a 6x135 bolt pattern and an 87.1 mm center bore. That is the pattern and hub size Ford uses on these trucks, so the wheel centers on the hub without adapters.
Offset. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on these trucks is about +34 mm; this wheel is 0mm.
Lug nuts. Lug nuts are not part of BBS's listing for this wheel. The F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 lug studs, and BBS does not state a lug seat type for this wheel, so choose nuts to match that thread and confirm the seat before installing.
Warranty. BBS's warranty page states that structural manufacturing defects are covered for 10 years and the painted finish for 2 years. The warranty is void after impact damage, if the wheel is altered, or if the application is not approved by BBS.
Features
- 17x9 with 6x135 bolt pattern and 87.1 mm center bore
- 0mm offset, about 4.5 in computed backspacing
- Satin Silver finish
- Load figure of 2500 lb in BBS's Application PDF
- BBS TS series off-road wheel for trucks and SUVs
- 10-year structural and 2-year finish warranty
- BBS part number: TS-P179089P0003
Fitment: BBS publishes this wheel's specifications (size, bolt pattern, center bore, offset) but no vehicle list for its off-road wheels. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x135 with a bore of at least 87.1 mm fits the F-150 Raptor, F-150 Raptor R and Bronco Raptor. Bore per BBS Application PDF. Check brake, fender and suspension clearance before ordering.
Guides & Manuals
TS-P Applications PDFThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$399.00
The BBS TS-P is a 17x9 off-road wheel in Satin Silver, drilled 6x139.7 (6x5.5) with a 106.1 mm center bore and a 0mm offset. We list it for the 2024-2026 Ford Ranger Raptor, the Raptor that uses the 6x139.7 bolt pattern.
What BBS publishes. BBS's TS-P Applications PDF lists this wheel (part number TS-P179084P0003) as 17 inch diameter, 9 inch width, 6x139.7, 106.1 center bore, 0 offset, Satin Silver, with a load figure of 2500 lb. BBS introduces its TS wheels as 17, 18 and 20 inch off-road wheels for trucks and SUVs.
Backspacing (computed). BBS does not publish backspacing. Computed from the 9 inch width and the 0mm offset (width / 2 + offset / 25.4), it is about 4.5 in.
Center bore and hub rings. The 106.1 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so this wheel needs hub-centric rings (93.1 mm to 106.1 mm) to center it on the hub. Rings are not included.
Offset. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor offset is +55 mm; this wheel is 0mm.
Lug nuts. Lug nuts are not included. The Ranger Raptor uses M12x1.5 studs, and BBS does not state a lug seat type for this wheel, so confirm the correct nuts before installing.
Warranty. BBS's warranty page states that structural manufacturing defects are covered for 10 years and the painted finish for 2 years. The warranty is void after impact damage, if the wheel is altered, or if the application is not approved by BBS.
Features
- 17x9 with 6x139.7 bolt pattern and 106.1 mm center bore
- 0mm offset, about 4.5 in computed backspacing
- Satin Silver finish
- Load figure of 2500 lb in BBS's Application PDF
- BBS TS series off-road wheel for trucks and SUVs
- 10-year structural and 2-year finish warranty
- BBS part number: TS-P179084P0003
Fitment: BBS publishes this wheel's specifications (size, bolt pattern, center bore, offset) but no vehicle list for its off-road wheels. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x139.7 with a bore of at least 93.1 mm fits the 2024-2026 Ranger Raptor only. Bore per BBS Application PDF. Check brake, fender and suspension clearance before ordering.
Guides & Manuals
TS-P Applications PDFThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$399.00
The BBS TS-P is a 17x9 off-road wheel in Satin Silver, drilled 6x139.7 (6x5.5) with a 106.1 mm center bore and a -12mm offset. We list it for the 2024-2026 Ford Ranger Raptor, the Raptor that uses the 6x139.7 bolt pattern.
What BBS publishes. BBS's TS-P Applications PDF lists this wheel (part number TS-P179084N1203) as 17 inch diameter, 9 inch width, 6x139.7, 106.1 center bore, -12 offset, Satin Silver, with a load figure of 2500 lb. BBS introduces its TS wheels as 17, 18 and 20 inch off-road wheels for trucks and SUVs.
Backspacing (computed). BBS does not publish backspacing. Computed from the 9 inch width and the -12mm offset (width / 2 + offset / 25.4), it is about 4.03 in.
Center bore and hub rings. The 106.1 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so this wheel needs hub-centric rings (93.1 mm to 106.1 mm) to center it on the hub. Rings are not included.
Offset. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor offset is +55 mm; this wheel is -12mm.
Lug nuts. Lug nuts are not included. The Ranger Raptor uses M12x1.5 studs, and BBS does not state a lug seat type for this wheel, so confirm the correct nuts before installing.
Warranty. BBS's warranty page states that structural manufacturing defects are covered for 10 years and the painted finish for 2 years. The warranty is void after impact damage, if the wheel is altered, or if the application is not approved by BBS.
Features
- 17x9 with 6x139.7 bolt pattern and 106.1 mm center bore
- -12mm offset, about 4.03 in computed backspacing
- Satin Silver finish
- Load figure of 2500 lb in BBS's Application PDF
- BBS TS series off-road wheel for trucks and SUVs
- 10-year structural and 2-year finish warranty
- BBS part number: TS-P179084N1203
Fitment: BBS publishes this wheel's specifications (size, bolt pattern, center bore, offset) but no vehicle list for its off-road wheels. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x139.7 with a bore of at least 93.1 mm fits the 2024-2026 Ranger Raptor only. Bore per BBS Application PDF. Check brake, fender and suspension clearance before ordering.
Guides & Manuals
TS-P Applications PDFThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$549.00
The BBS TS-M in Satin Silver is a 20x9 wheel drilled 6x135 with an 87.1 mm center bore and a 12 mm offset. BBS lists it in its TS off-road wheel range for trucks and SUVs. On RaptorsOnly.com it is matched to the Ford Raptors that share the 6x135 bolt pattern and 87.1 mm hub: the F-150 Raptor, the F-150 Raptor R and the Bronco Raptor.
Made to match the Raptor hub. BBS lists this wheel with a 6x135 bolt pattern and an 87.1 mm center bore. That is the pattern and hub size Ford uses on these trucks, so the wheel centers on the hub without adapters.
Wide 9 inch stance. At 20x9 with a 12 mm offset, the wheel sits further out than the factory wheel and gives a wider, more aggressive look. BBS does not publish backspacing for this wheel; computed from its published width and offset it is about 5.0 in (9 in / 2 + 12 mm / 25.4).
Backed by BBS. BBS states that its wheels are warranted against structural manufacturing defects for 10 years and against finish manufacturing defects for 2 years on painted wheels. BBS notes the warranty is void if the application is not approved by BBS, if the wheel shows impact damage, or if the wheel is altered.
Features
- Size: 20x9 in
- Bolt pattern: 6x135
- Center bore: 87.1 mm
- Offset: 12 mm
- Backspacing: about 5.0 in (computed, not published by BBS)
- Finish: Satin Silver
- Load rating: 2,500 lb as listed by BBS
- BBS part number: TS-M209089P1203
Fitment: BBS publishes this wheel as 20x9, 6x135, 87.1 mm center bore, 12 mm offset, Satin Silver, and lists wheel specifications only, with no vehicle list. It is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm hub. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per BBS Application PDF. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Lug nuts are not part of BBS's listing for this wheel. The F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 lug studs, so choose nuts to match that thread and the wheel's seat.
Guides & Manuals
BBS TS-M Applications (PDF)This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$549.00
The BBS TS-M in Satin Bronze is a 20x9 wheel drilled 6x135 with an 87.1 mm center bore and a 12 mm offset. BBS lists it in its TS off-road wheel range for trucks and SUVs. On RaptorsOnly.com it is matched to the Ford Raptors that share the 6x135 bolt pattern and 87.1 mm hub: the F-150 Raptor, the F-150 Raptor R and the Bronco Raptor.
Made to match the Raptor hub. BBS lists this wheel with a 6x135 bolt pattern and an 87.1 mm center bore. That is the pattern and hub size Ford uses on these trucks, so the wheel centers on the hub without adapters.
Wide 9 inch stance. At 20x9 with a 12 mm offset, the wheel sits further out than the factory wheel and gives a wider, more aggressive look. BBS does not publish backspacing for this wheel; computed from its published width and offset it is about 5.0 in (9 in / 2 + 12 mm / 25.4).
Backed by BBS. BBS states that its wheels are warranted against structural manufacturing defects for 10 years and against finish manufacturing defects for 2 years on painted wheels. BBS notes the warranty is void if the application is not approved by BBS, if the wheel shows impact damage, or if the wheel is altered.
Features
- Size: 20x9 in
- Bolt pattern: 6x135
- Center bore: 87.1 mm
- Offset: 12 mm
- Backspacing: about 5.0 in (computed, not published by BBS)
- Finish: Satin Bronze
- Load rating: 2,500 lb as listed by BBS
- BBS part number: TS-M209089P1202
Fitment: BBS publishes this wheel as 20x9, 6x135, 87.1 mm center bore, 12 mm offset, Satin Bronze, and lists wheel specifications only, with no vehicle list. It is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm hub. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per BBS Application PDF. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Lug nuts are not part of BBS's listing for this wheel. The F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 lug studs, so choose nuts to match that thread and the wheel's seat.
Guides & Manuals
BBS TS-M Applications (PDF)This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$549.00
The BBS TS-M in Satin Black is a 20x9 wheel drilled 6x135 with an 87.1 mm center bore and a 12 mm offset. BBS lists it in its TS off-road wheel range for trucks and SUVs. On RaptorsOnly.com it is matched to the Ford Raptors that share the 6x135 bolt pattern and 87.1 mm hub: the F-150 Raptor, the F-150 Raptor R and the Bronco Raptor.
Made to match the Raptor hub. BBS lists this wheel with a 6x135 bolt pattern and an 87.1 mm center bore. That is the pattern and hub size Ford uses on these trucks, so the wheel centers on the hub without adapters.
Wide 9 inch stance. At 20x9 with a 12 mm offset, the wheel sits further out than the factory wheel and gives a wider, more aggressive look. BBS does not publish backspacing for this wheel; computed from its published width and offset it is about 5.0 in (9 in / 2 + 12 mm / 25.4).
Backed by BBS. BBS states that its wheels are warranted against structural manufacturing defects for 10 years and against finish manufacturing defects for 2 years on painted wheels. BBS notes the warranty is void if the application is not approved by BBS, if the wheel shows impact damage, or if the wheel is altered.
Features
- Size: 20x9 in
- Bolt pattern: 6x135
- Center bore: 87.1 mm
- Offset: 12 mm
- Backspacing: about 5.0 in (computed, not published by BBS)
- Finish: Satin Black
- Load rating: 2,500 lb as listed by BBS
- BBS part number: TS-M209089P1201
Fitment: BBS publishes this wheel as 20x9, 6x135, 87.1 mm center bore, 12 mm offset, Satin Black, and lists wheel specifications only, with no vehicle list. It is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm hub. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per BBS Application PDF. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Lug nuts are not part of BBS's listing for this wheel. The F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 lug studs, so choose nuts to match that thread and the wheel's seat.
Guides & Manuals
BBS TS-M Applications (PDF)This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$449.00
The BBS TS-M in Satin Silver is a 18x9 wheel drilled 6x135 with an 87.1 mm center bore and a 0 mm offset. BBS lists it in its TS off-road wheel range for trucks and SUVs. On RaptorsOnly.com it is matched to the Ford Raptors that share the 6x135 bolt pattern and 87.1 mm hub: the F-150 Raptor, the F-150 Raptor R and the Bronco Raptor.
Made to match the Raptor hub. BBS lists this wheel with a 6x135 bolt pattern and an 87.1 mm center bore. That is the pattern and hub size Ford uses on these trucks, so the wheel centers on the hub without adapters.
Wide 9 inch stance. At 18x9 with a 0 mm offset, the wheel sits further out than the factory wheel and gives a wider, more aggressive look. BBS does not publish backspacing for this wheel; computed from its published width and offset it is about 4.5 in (9 in / 2 + 0 mm / 25.4).
Backed by BBS. BBS states that its wheels are warranted against structural manufacturing defects for 10 years and against finish manufacturing defects for 2 years on painted wheels. BBS notes the warranty is void if the application is not approved by BBS, if the wheel shows impact damage, or if the wheel is altered.
Features
- Size: 18x9 in
- Bolt pattern: 6x135
- Center bore: 87.1 mm
- Offset: 0 mm
- Backspacing: about 4.5 in (computed, not published by BBS)
- Finish: Satin Silver
- Load rating: 2,500 lb as listed by BBS
- BBS part number: TS-M189089P0003
Fitment: BBS publishes this wheel as 18x9, 6x135, 87.1 mm center bore, 0 mm offset, Satin Silver, and lists wheel specifications only, with no vehicle list. It is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm hub. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per BBS Application PDF. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Lug nuts are not part of BBS's listing for this wheel. The F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 lug studs, so choose nuts to match that thread and the wheel's seat.
Guides & Manuals
BBS TS-M Applications (PDF)This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$449.00
The BBS TS-M in Satin Black is a 18x9 wheel drilled 6x135 with an 87.1 mm center bore and a 0 mm offset. BBS lists it in its TS off-road wheel range for trucks and SUVs. On RaptorsOnly.com it is matched to the Ford Raptors that share the 6x135 bolt pattern and 87.1 mm hub: the F-150 Raptor, the F-150 Raptor R and the Bronco Raptor.
Made to match the Raptor hub. BBS lists this wheel with a 6x135 bolt pattern and an 87.1 mm center bore. That is the pattern and hub size Ford uses on these trucks, so the wheel centers on the hub without adapters.
Wide 9 inch stance. At 18x9 with a 0 mm offset, the wheel sits further out than the factory wheel and gives a wider, more aggressive look. BBS does not publish backspacing for this wheel; computed from its published width and offset it is about 4.5 in (9 in / 2 + 0 mm / 25.4).
Backed by BBS. BBS states that its wheels are warranted against structural manufacturing defects for 10 years and against finish manufacturing defects for 2 years on painted wheels. BBS notes the warranty is void if the application is not approved by BBS, if the wheel shows impact damage, or if the wheel is altered.
Features
- Size: 18x9 in
- Bolt pattern: 6x135
- Center bore: 87.1 mm
- Offset: 0 mm
- Backspacing: about 4.5 in (computed, not published by BBS)
- Finish: Satin Black
- Load rating: 2,500 lb as listed by BBS
- BBS part number: TS-M189089P0001
Fitment: BBS publishes this wheel as 18x9, 6x135, 87.1 mm center bore, 0 mm offset, Satin Black, and lists wheel specifications only, with no vehicle list. It is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm hub. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per BBS Application PDF. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Lug nuts are not part of BBS's listing for this wheel. The F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 lug studs, so choose nuts to match that thread and the wheel's seat.
Guides & Manuals
BBS TS-M Applications (PDF)This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$399.00
The BBS TS-M in Satin Bronze is a 17x9 wheel drilled 6x139.7 (6x5.5) with a 106.1 mm center bore and a -12 mm offset. BBS lists it in its TS off-road wheel range for trucks and SUVs. On RaptorsOnly.com it is matched to the Ford Ranger Raptor, the Raptor that uses a 6x139.7 bolt pattern.
Made to match the Ranger Raptor bolt pattern. BBS lists this wheel with a 6x139.7 bolt pattern, the pattern Ford uses on the Ranger Raptor. Its 106.1 mm center bore is larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings sized 106.1 mm to 93.1 mm to center it on the hub.
Wide 9 inch stance. At 17x9 with a -12 mm offset, the wheel sits well out from the factory wheel and gives a wider, more aggressive look. BBS does not publish backspacing for this wheel; computed from its published width and offset it is about 4.0 in (9 in / 2 - 12 mm / 25.4 = 4.03 in).
Backed by BBS. BBS states that its wheels are warranted against structural manufacturing defects for 10 years and against finish manufacturing defects for 2 years on painted wheels. BBS notes the warranty is void if the application is not approved by BBS, if the wheel shows impact damage, or if the wheel is altered.
Features
- Size: 17x9 in
- Bolt pattern: 6x139.7 (6x5.5)
- Center bore: 106.1 mm (hub-centric rings needed for the 93.1 mm Ranger Raptor hub)
- Offset: -12 mm
- Backspacing: about 4.0 in (computed, not published by BBS)
- Finish: Satin Bronze
- Load rating: 2,500 lb as listed by BBS
- BBS part number: TS-M179084N1202
Fitment: BBS publishes this wheel as 17x9, 6x139.7, 106.1 mm center bore, -12 mm offset, Satin Bronze, and lists wheel specifications only, with no vehicle list. It is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm hub. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per BBS Application PDF. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Lug nuts are not part of BBS's listing for this wheel. The Ranger Raptor uses M12x1.5 lug studs, so choose nuts to match that thread and the wheel's seat.
Guides & Manuals
BBS TS-M Applications (PDF)This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$549.00
The BBS TS-C in Satin Silver is a 20x9 wheel drilled 6x135 with an 87.1 mm center bore and a 12 mm offset. BBS lists it in its TS off-road wheel range for trucks and SUVs. On RaptorsOnly.com it is matched to the Ford Raptors that share the 6x135 bolt pattern and 87.1 mm hub: the F-150 Raptor, the F-150 Raptor R and the Bronco Raptor.
Made to match the Raptor hub. BBS lists this wheel with a 6x135 bolt pattern and an 87.1 mm center bore. That is the pattern and hub size Ford uses on these trucks, so the wheel centers on the hub without adapters.
Wide 9 inch stance. At 20x9 with a 12 mm offset, the wheel sits further out than the factory wheel and gives a wider, more aggressive look. BBS does not publish backspacing for this wheel; computed from its published width and offset it is about 5.0 in (9 in / 2 + 12 mm / 25.4).
Backed by BBS. BBS states that its wheels are warranted against structural manufacturing defects for 10 years and against finish manufacturing defects for 2 years on painted wheels. BBS notes the warranty is void if the application is not approved by BBS, if the wheel shows impact damage, or if the wheel is altered.
Features
- Size: 20x9 in
- Bolt pattern: 6x135
- Center bore: 87.1 mm
- Offset: 12 mm
- Backspacing: about 5.0 in (computed, not published by BBS)
- Finish: Satin Silver
- Load rating: 2,500 lb as listed by BBS
- BBS part number: TS-C209089P1203
Fitment: BBS publishes this wheel as 20x9, 6x135, 87.1 mm center bore, 12 mm offset, Satin Silver, and lists wheel specifications only, with no vehicle list. It is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm hub. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per BBS Application PDF. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Lug nuts are not part of BBS's listing for this wheel. The F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 lug studs, so choose nuts to match that thread and the wheel's seat.
Guides & Manuals
BBS TS-C Applications (PDF)This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$549.00
The BBS TS-C in Satin Bronze is a 20x9 wheel drilled 6x135 with an 87.1 mm center bore and a 12 mm offset. BBS lists it in its TS off-road wheel range for trucks and SUVs. On RaptorsOnly.com it is matched to the Ford Raptors that share the 6x135 bolt pattern and 87.1 mm hub: the F-150 Raptor, the F-150 Raptor R and the Bronco Raptor.
Made to match the Raptor hub. BBS lists this wheel with a 6x135 bolt pattern and an 87.1 mm center bore. That is the pattern and hub size Ford uses on these trucks, so the wheel centers on the hub without adapters.
Wide 9 inch stance. At 20x9 with a 12 mm offset, the wheel sits further out than the factory wheel and gives a wider, more aggressive look. BBS does not publish backspacing for this wheel; computed from its published width and offset it is about 5.0 in (9 in / 2 + 12 mm / 25.4).
Backed by BBS. BBS states that its wheels are warranted against structural manufacturing defects for 10 years and against finish manufacturing defects for 2 years on painted wheels. BBS notes the warranty is void if the application is not approved by BBS, if the wheel shows impact damage, or if the wheel is altered.
Features
- Size: 20x9 in
- Bolt pattern: 6x135
- Center bore: 87.1 mm
- Offset: 12 mm
- Backspacing: about 5.0 in (computed, not published by BBS)
- Finish: Satin Bronze
- Load rating: 2,500 lb as listed by BBS
- BBS part number: TS-C209089P1202
Fitment: BBS publishes this wheel as 20x9, 6x135, 87.1 mm center bore, 12 mm offset, Satin Bronze, and lists wheel specifications only, with no vehicle list. It is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm hub. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per BBS Application PDF. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Lug nuts are not part of BBS's listing for this wheel. The F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 lug studs, so choose nuts to match that thread and the wheel's seat.
Guides & Manuals
BBS TS-C Applications (PDF)This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$549.00
The BBS TS-C in Satin Black is a 20x9 wheel drilled 6x135 with an 87.1 mm center bore and a 12 mm offset. BBS lists it in its TS off-road wheel range for trucks and SUVs. On RaptorsOnly.com it is matched to the Ford Raptors that share the 6x135 bolt pattern and 87.1 mm hub: the F-150 Raptor, the F-150 Raptor R and the Bronco Raptor.
Made to match the Raptor hub. BBS lists this wheel with a 6x135 bolt pattern and an 87.1 mm center bore. That is the pattern and hub size Ford uses on these trucks, so the wheel centers on the hub without adapters.
Wide 9 inch stance. At 20x9 with a 12 mm offset, the wheel sits further out than the factory wheel and gives a wider, more aggressive look. BBS does not publish backspacing for this wheel; computed from its published width and offset it is about 5.0 in (9 in / 2 + 12 mm / 25.4).
Backed by BBS. BBS states that its wheels are warranted against structural manufacturing defects for 10 years and against finish manufacturing defects for 2 years on painted wheels. BBS notes the warranty is void if the application is not approved by BBS, if the wheel shows impact damage, or if the wheel is altered.
Features
- Size: 20x9 in
- Bolt pattern: 6x135
- Center bore: 87.1 mm
- Offset: 12 mm
- Backspacing: about 5.0 in (computed, not published by BBS)
- Finish: Satin Black
- Load rating: 2,500 lb as listed by BBS
- BBS part number: TS-C209089P1201
Fitment: BBS publishes this wheel as 20x9, 6x135, 87.1 mm center bore, 12 mm offset, Satin Black, and lists wheel specifications only, with no vehicle list. It is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm hub. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per BBS Application PDF. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Lug nuts are not part of BBS's listing for this wheel. The F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 lug studs, so choose nuts to match that thread and the wheel's seat.
Guides & Manuals
BBS TS-C Applications (PDF)This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$399.00
The BBS TS-C in Satin Silver is a 20x9 wheel drilled 6x139.7 (6x5.5) with a 106.1 mm center bore and a 0 mm offset. BBS lists it in its TS off-road wheel range for trucks and SUVs. On RaptorsOnly.com it is matched to the Ford Ranger Raptor, the Raptor that uses a 6x139.7 bolt pattern.
Made to match the Ranger Raptor bolt pattern. BBS lists this wheel with a 6x139.7 bolt pattern, the pattern Ford uses on the Ranger Raptor. Its 106.1 mm center bore is larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings sized 106.1 mm to 93.1 mm to center it on the hub.
Wide 9 inch stance. At 20x9 with a 0 mm offset, the wheel sits further out than the factory wheel and gives a wider, more aggressive look. BBS does not publish backspacing for this wheel; computed from its published width and offset it is about 4.5 in (9 in / 2 + 0 mm / 25.4).
Backed by BBS. BBS states that its wheels are warranted against structural manufacturing defects for 10 years and against finish manufacturing defects for 2 years on painted wheels. BBS notes the warranty is void if the application is not approved by BBS, if the wheel shows impact damage, or if the wheel is altered.
Features
- Size: 20x9 in
- Bolt pattern: 6x139.7 (6x5.5)
- Center bore: 106.1 mm (hub-centric rings needed for the 93.1 mm Ranger Raptor hub)
- Offset: 0 mm
- Backspacing: about 4.5 in (computed, not published by BBS)
- Finish: Satin Silver
- Load rating: 2,500 lb as listed by BBS
- BBS part number: TS-C209084P0003
Fitment: BBS publishes this wheel as 20x9, 6x139.7, 106.1 mm center bore, 0 mm offset, Satin Silver, and lists wheel specifications only, with no vehicle list. It is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm hub. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per BBS Application PDF. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Lug nuts are not part of BBS's listing for this wheel. The Ranger Raptor uses M12x1.5 lug studs, so choose nuts to match that thread and the wheel's seat.
Guides & Manuals
BBS TS-C Applications (PDF)This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$399.00
The BBS TS-C is a 20x9 off-road wheel in Satin Bronze, drilled 6x139.7 (6x5.5) with a 106.1 mm center bore and a 0 mm offset. We list it for the 2024-2026 Ford Ranger Raptor, the Raptor that uses the 6x139.7 bolt pattern.
What BBS publishes. BBS's TS-C Applications PDF lists this wheel (part number TS-C209084P0002) as 20 inch diameter, 9 inch width, 6x139.7, 106.1 center bore, 0 offset, Satin Bronze, with a load figure of 2500 lb. BBS introduces its TS wheels as 17, 18 and 20 inch off-road wheels for trucks and SUVs.
Backspacing (computed). BBS does not publish backspacing. Computed from the 9 inch width and the 0 mm offset (width / 2 + offset / 25.4), it is about 4.5 in.
Center bore and hub rings. The 106.1 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so this wheel needs hub-centric rings (93.1 mm to 106.1 mm) to center it on the hub. Rings are not included.
Offset. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor offset is +55 mm; this wheel is 0 mm.
Lug nuts. Lug nuts are not included. The Ranger Raptor uses M12x1.5 studs, and BBS does not state a lug seat type for this wheel, so confirm the correct nuts before installing.
Warranty. BBS's warranty page states that structural manufacturing defects are covered for 10 years and the painted finish for 2 years. The warranty is void after impact damage, if the wheel is altered, or if the application is not approved by BBS.
Features
- 20x9 with 6x139.7 bolt pattern and 106.1 mm center bore
- 0mm offset, about 4.5 in computed backspacing
- Satin Bronze finish
- Load figure of 2500 lb in BBS's Application PDF
- BBS TS series off-road wheel for trucks and SUVs
- 10-year structural and 2-year finish warranty
- BBS part number: TS-C209084P0002
Fitment: BBS publishes this wheel's specifications (size, bolt pattern, center bore, offset) but no vehicle list for its off-road wheels. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x139.7 with a bore of at least 93.1 mm fits the 2024-2026 Ranger Raptor only. Bore per BBS Application PDF. Check brake, fender and suspension clearance before ordering.
Guides & Manuals
TS-C Applications PDFThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.