Welcome to RaptorsOnly.com
-
Brands
Shop by brand
- 3D MAXpider
- Access
- Addictive Desert Designs
- Advan
- AEM Induction
- aFe
- Air Lift
- Airaid
- Alcon
- AlphaRex
- AMP Research
- AMS
- Anderson Composites
- ANZO
- ARB
- Atturo Tire
- AutoMeter
- AVS
- AWE Tuning
- BackRack
- Baer Brakes
- Baja Designs
- BAK
- Banks Power
- BBK
- BBS
- BD Diesel
- Belltech
- Bestop
- BFGoodrich
- BMC
- Body Armor 4x4
- Borla
- Brembo
- Brembo OE
- Bully Dog
- Bushwacker
- Camburg
- Clevite
- COBB
- Cometic Gasket
- COMP Cams
- CORSA Performance
- Covercraft
- CSF
- DBA
- DeatschWerks
- DFC
- Diode Dynamics
- DS18
- DV8 Offroad
- Eaton
- EBC
- Eibach
- Enkei
- Extang
- Fabtech
- Fel-Pro
- fifteen52
- Firestone
- Flowmaster
- Ford Racing
- Forgestar
- FORM Lighting
- FOX
- Garrett
- Gates
- GEN-Y Hitch
- Go Fast Bits
- Go Rhino
- Gram Lights
- Granatelli Motor Sports
- GSC Power Division
- Hawk Performance
- Hella
- Hellwig
- Hotchkis
- Husky Liners
- ICON
- Injen
- J&L
- JBA
- JLT
- K&N Engineering
- KC HiLiTES
- King Engine Bearings
- King Shocks
- Kleinn Air Horns
- Kooks Headers
- KYB
- LIQUI MOLY
- LUND
- Magnaflow
- Mahle OE
- Maxtrac
- Mayhem
- MBRP
- McGard
- Method Wheels
- MGP
- Michelin
- Mickey Thompson
- Mishimoto
- Moog
- Motul
- MTX Wheels
- N-Fab
- Nacho Offroad Technology
- NGK
- Nitrous Express
- Odyssey Battery
- ORACLE Lighting
- PowerStop
- Putco
- QA1
- Raceline
- Radium Engineering
- Rally Armor
- Rampage
- Raxiom
- Retrax
- Rhino-Rack
- Ridetech
- Rigid Industries
- Rival 4x4
- RockJock
- Roll-N-Lock
- Roush
- Royal Purple
- SCT Performance
- Skyjacker
- Snow Performance
- SPC Performance
- SPOD
- Stainless Works
- Superlift
- Superpro
- Timbren
- Torque Solution
- TOYO
- Truxedo
- Tuff Country
- Turbosmart
- UMI Performance
- Undercover
- Volant
- Vossen
- Wagner Tuning
- WeatherTech
- Weld
- Westin
- Whiteline
- Wilwood
- Yokohama Tire
- Yukon Gear & Axle
- Zone Offroad
No brands found. Try another name or initial.
156 brands
View all brands -
F-150 Raptor
- F-150 Raptor
-
1st Gen (2010-2014)
-
2nd Gen (2017-2020)
-
3rd Gen (2021-Present)
-
Raptor R (2023-Present)
-
Bronco Raptor
- Bronco Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
-
Ranger Raptor
- Ranger Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
Your cart
You'll love this too
Discount invalid. Please make sure the discount details are correct.
Discount code is already applied.
Discount applied!
Subheading
Product comparison
Describe you product comparison grid
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
Find wheels and tires that fit your Raptor
Pick your truck and we'll narrow the catalogue to the wheels drilled for your bolt pattern and the tire sizes that fit your rims.
Shopping for
- Bolt pattern
- Hub bore
- Factory tire
365 products
365 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
The fifteen52 Range HD is a 17x8.5 cast aluminum wheel in Magnesium Grey, drilled 6x139.7 (6x5.5) with a 106.2 mm center bore. That bolt pattern matches the Ford Ranger Raptor, and the bore is larger than the Ranger Raptor's 93.1 mm hub, so the wheel mounts with hub-centric rings.
Motorsport styling. fifteen52 calls the Range HD a true motorsport design pulled from its street line. Lightweight, concave spokes carry the look, and the RockRing outer lip stands out among simulated beadlocks.
Published specifications. Per fifteen52's Tech Specs for part GHDMG-178569-00: 17 in diameter, 8.5 in width, 6x139.7 bolt pattern, 0 mm offset, 4.75 in backspacing, 106.2 mm hub bore, 26.18 lb weight and a 2,500 lb load rating.
Sold individually. Each wheel comes with one color-coded 52 cap. The maker lists only the cap as included, so plan to buy lug nuts separately: the Ranger Raptor uses M12x1.5 studs.
Features
- Cast in A356-T6 aluminum alloy
- Tested to SAE standards
- RockRing outer lip
- Flush-mounted, color-coded 52 cap
- TPMS compatible
Fitment: fifteen52 publishes this wheel as 17x8.5, 6x139.7, 0 mm offset, 4.75 in backspacing; fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs. Bore per fifteen52's Tech Specs (106.2 mm); hub-centric rings from 106.2 mm down to the Ranger Raptor's 93.1 mm hub are needed. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory wheel offset is about +55 mm on the Ranger Raptor.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The fifteen52 Range HD is a 17x8.5 cast aluminum wheel in Magnesium Grey, drilled 6x135 with an 87.1 mm center bore. That bolt pattern and bore match the hubs on the Ford F-150 Raptor, F-150 Raptor R and Bronco Raptor, so it bolts on with no hub rings.
Motorsport styling. fifteen52 calls the Range HD a true motorsport design pulled from its street line. Lightweight, concave spokes carry the look, and the RockRing outer lip stands out among simulated beadlocks.
Published specifications. Per fifteen52's Tech Specs for part GHDMG-178565-00: 17 in diameter, 8.5 in width, 6x135 bolt pattern, 0 mm offset, 4.75 in backspacing, 87.1 mm hub bore, 26.62 lb weight and a 2,500 lb load rating.
Sold individually. Each wheel comes with one color-coded 52 cap. The maker lists only the cap as included, so plan to buy lug nuts separately: the F-150 Raptor, Raptor R and Bronco Raptor use M14x1.5 studs.
Features
- Cast in A356-T6 aluminum alloy
- Tested to SAE standards
- RockRing outer lip
- Flush-mounted, color-coded 52 cap
- TPMS compatible
Fitment: fifteen52 publishes this wheel as 17x8.5, 6x135, 0 mm offset, 4.75 in backspacing; fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs. Bore per fifteen52's Tech Specs (87.1 mm, equal to the Raptor hub). This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
The fifteen52 Range HD is a 17x8.5 cast aluminum wheel in Asphalt Black, drilled 6x139.7 (6x5.5) with a 106.2 mm center bore. That bolt pattern matches the Ford Ranger Raptor, and the bore is larger than the Ranger Raptor's 93.1 mm hub, so the wheel mounts with hub-centric rings.
Motorsport styling. fifteen52 calls the Range HD a true motorsport design pulled from its street line. Lightweight, concave spokes carry the look, and the RockRing outer lip stands out among simulated beadlocks.
Published specifications. Per fifteen52's Tech Specs for part GHDAB-178569-00: 17 in diameter, 8.5 in width, 6x139.7 bolt pattern, 0 mm offset, 4.75 in backspacing, 106.2 mm hub bore, 26.18 lb weight and a 2,500 lb load rating.
Sold individually. Each wheel comes with one color-coded 52 cap. The maker lists only the cap as included, so plan to buy lug nuts separately: the Ranger Raptor uses M12x1.5 studs.
Features
- Cast in A356-T6 aluminum alloy
- Tested to SAE standards
- RockRing outer lip
- Flush-mounted, color-coded 52 cap
- TPMS compatible
Fitment: fifteen52 publishes this wheel as 17x8.5, 6x139.7, 0 mm offset, 4.75 in backspacing; fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs. Bore per fifteen52's Tech Specs (106.2 mm); hub-centric rings from 106.2 mm down to the Ranger Raptor's 93.1 mm hub are needed. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory wheel offset is about +55 mm on the Ranger Raptor.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The fifteen52 Range HD is a 17x8.5 cast aluminum wheel in Asphalt Black, drilled 6x135 with an 87.1 mm center bore. That bolt pattern and bore match the hubs on the Ford F-150 Raptor, F-150 Raptor R and Bronco Raptor, so it bolts on with no hub rings.
Motorsport styling. fifteen52 calls the Range HD a true motorsport design pulled from its street line. Lightweight, concave spokes carry the look, and the RockRing outer lip stands out among simulated beadlocks.
Published specifications. Per fifteen52's Tech Specs for part GHDAB-178565-00: 17 in diameter, 8.5 in width, 6x135 bolt pattern, 0 mm offset, 4.75 in backspacing, 87.1 mm hub bore, 26.62 lb weight and a 2,500 lb load rating.
Sold individually. Each wheel comes with one color-coded 52 cap. The maker lists only the cap as included, so plan to buy lug nuts separately: the F-150 Raptor, Raptor R and Bronco Raptor use M14x1.5 studs.
Features
- Cast in A356-T6 aluminum alloy
- Tested to SAE standards
- RockRing outer lip
- Flush-mounted, color-coded 52 cap
- TPMS compatible
Fitment: fifteen52 publishes this wheel as 17x8.5, 6x135, 0 mm offset, 4.75 in backspacing; fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs. Bore per fifteen52's Tech Specs (87.1 mm, equal to the Raptor hub). This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
The fifteen52 Evolution HD is a 17x8.0 cast aluminum wheel in Classic White, drilled 6x139.7 with a 106.2 mm center bore and a 35 mm offset. That bolt pattern matches the Ford Ranger Raptor, and the bore is larger than the Ranger Raptor's 93.1 mm hub, so the wheel mounts with hub-centric rings.
Built for the dunes and the trail. fifteen52 describes the Evolution HD as a wheel to rip through it all, with a turbofan-style center that dives down into an angled step lip for cooling and protection.
Published specifications. Per fifteen52's Tech Specs for part EHDCW-78069+35: 17 in diameter, 8.0 in width, 6x139.7 bolt pattern, 35 mm offset, 5.875 in backspacing, 106.2 mm hub bore, 27.50 lb weight and a 2,650 lb load rating.
Sold individually. Each wheel comes with one color-coded 52 motorsport cap. The maker lists only the cap as included, so plan to buy lug nuts separately: the Ranger Raptor uses M12x1.5 studs.
Features
- Cast in A356-T6 aluminum alloy
- Tested to SAE standards
- Turbofan-style center with angled step lip
- Flush-mounted 52 motorsport cap
- TPMS compatible
Fitment: fifteen52 publishes this wheel as 17x8.0, 6x139.7, 35 mm offset, 5.875 in backspacing; fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs. Bore per fifteen52's Tech Specs (106.2 mm); hub-centric rings from 106.2 mm down to the Ranger Raptor's 93.1 mm hub are needed. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory wheel offset is about +55 mm on the Ranger Raptor.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The fifteen52 Analog HD is a 17x8.0 cast aluminum wheel in Classic White, drilled 6x139.7 (6x5.5) with a 106.2 mm center bore and a 25 mm offset. That bolt pattern matches the Ford Ranger Raptor, and the bore is larger than the Ranger Raptor's 93.1 mm hub, so the wheel mounts with hub-centric rings.
Vintage steel-wheel look. fifteen52 designed the Analog HD to give the look of a classic steel wheel with the light weight of modern aluminum. It adds large caliper clearance and cooling slots.
Published specifications. Per fifteen52's Tech Specs for part AHDCW-78069+25: 17 in diameter, 8.0 in width, 6x139.7 bolt pattern, 25 mm offset, 5.5 in backspacing, 106.2 mm hub bore, 29.48 lb weight and a 2,650 lb load rating.
Sold individually. Each wheel comes with one color-coded 52 cap. The maker lists only the cap as included, so plan to buy lug nuts separately: the Ranger Raptor uses M12x1.5 studs.
Features
- Cast in A356-T6 aluminum alloy
- Tested to SAE standards
- Large caliper clearance and cooling slots
- Flush-mounted, color-coded 52 cap
- TPMS compatible
Fitment: fifteen52 publishes this wheel as 17x8.0, 6x139.7, 25 mm offset, 5.5 in backspacing; fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs. Bore per fifteen52's Tech Specs (106.2 mm); hub-centric rings from 106.2 mm down to the Ranger Raptor's 93.1 mm hub are needed. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory wheel offset is about +55 mm on the Ranger Raptor.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The fifteen52 Analog HD is a 17x8.5 cast aluminum wheel in Asphalt Black, drilled 6x139.7 (6x5.5) with a 106.2 mm center bore and a 0 mm offset. That bolt pattern matches the Ford Ranger Raptor, and the bore is larger than the Ranger Raptor's 93.1 mm hub, so the wheel mounts with hub-centric rings.
Vintage steel-wheel look. fifteen52 designed the Analog HD to give the look of a classic steel wheel with the light weight of modern aluminum. It adds large caliper clearance and cooling slots.
Published specifications. Per fifteen52's Tech Specs for part AHDAB-78569-00: 17 in diameter, 8.5 in width, 6x139.7 bolt pattern, 0 mm offset, 4.75 in backspacing, 106.2 mm hub bore, 27.50 lb weight and a 2,500 lb load rating.
Sold individually. Each wheel comes with one color-coded 52 cap. The maker lists only the cap as included, so plan to buy lug nuts separately: the Ranger Raptor uses M12x1.5 studs.
Features
- Cast in A356-T6 aluminum alloy
- Tested to SAE standards
- Large caliper clearance and cooling slots
- Flush-mounted, color-coded 52 cap
- TPMS compatible
Fitment: fifteen52 publishes this wheel as 17x8.5, 6x139.7, 0 mm offset, 4.75 in backspacing; fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs. Bore per fifteen52's Tech Specs (106.2 mm); hub-centric rings from 106.2 mm down to the Ranger Raptor's 93.1 mm hub are needed. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory wheel offset is about +55 mm on the Ranger Raptor.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The fifteen52 Analog HD is a 17x8.0 cast aluminum wheel in Asphalt Black, drilled 6x139.7 (6x5.5) with a 106.2 mm center bore and a 25 mm offset. That bolt pattern matches the Ford Ranger Raptor, and the bore is larger than the Ranger Raptor's 93.1 mm hub, so the wheel mounts with hub-centric rings.
Vintage steel-wheel look. fifteen52 designed the Analog HD to give the look of a classic steel wheel with the light weight of modern aluminum. It adds large caliper clearance and cooling slots.
Published specifications. Per fifteen52's Tech Specs for part AHDAB-78069+25: 17 in diameter, 8.0 in width, 6x139.7 bolt pattern, 25 mm offset, 5.5 in backspacing, 106.2 mm hub bore, 29.48 lb weight and a 2,650 lb load rating.
Sold individually. Each wheel comes with one color-coded 52 cap. The maker lists only the cap as included, so plan to buy lug nuts separately: the Ranger Raptor uses M12x1.5 studs.
Features
- Cast in A356-T6 aluminum alloy
- Tested to SAE standards
- Large caliper clearance and cooling slots
- Flush-mounted, color-coded 52 cap
- TPMS compatible
Fitment: fifteen52 publishes this wheel as 17x8.0, 6x139.7, 25 mm offset, 5.5 in backspacing; fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs. Bore per fifteen52's Tech Specs (106.2 mm); hub-centric rings from 106.2 mm down to the Ranger Raptor's 93.1 mm hub are needed. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory wheel offset is about +55 mm on the Ranger Raptor.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$449.00
The BBS TS-R in Satin Black is an 18x9 wheel drilled 6x135 with an 87.1 mm center bore and a 0 mm offset. BBS lists it in its TS off-road wheel range for trucks and SUVs. On RaptorsOnly.com it is matched to the Ford Raptors that share the 6x135 bolt pattern and 87.1 mm hub: the F-150 Raptor, the F-150 Raptor R and the Bronco Raptor.
Made to match the Raptor hub. BBS lists this wheel with a 6x135 bolt pattern and an 87.1 mm center bore. That is the pattern and hub size Ford uses on these trucks, so the wheel centers on the hub without adapters.
Wide 9 inch stance. At 18x9 with a 0 mm offset, the wheel sits further out than the factory wheel and gives a wider, more aggressive look. BBS does not publish backspacing for this wheel; computed from its published width and offset it is about 4.5 in (9 in / 2 + 0 mm / 25.4).
Backed by BBS. BBS states that its wheels are warranted against structural manufacturing defects for 10 years and against finish manufacturing defects for 2 years on painted wheels. BBS notes the warranty is void if the application is not approved by BBS, if the wheel shows impact damage, or if the wheel is altered.
Features
- Size: 18x9 in
- Bolt pattern: 6x135
- Center bore: 87.1 mm
- Offset: 0 mm
- Backspacing: about 4.5 in (computed, not published by BBS)
- Finish: Satin Black
- Load rating: 2,500 lb as listed by BBS
- BBS part number: TS-R189089P0001
Fitment: BBS publishes this wheel as 18x9, 6x135, 87.1 mm center bore, 0 mm offset, Satin Black, and lists wheel specifications only, with no vehicle list. It is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm hub. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per BBS Application PDF. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Lug nuts are not part of BBS's listing for this wheel. The F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 lug studs, so choose nuts to match that thread and the wheel's seat.
Guides & Manuals
BBS TS-R Applications (PDF)This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$449.00
The BBS TS-R is an 18x9 off-road wheel in Satin Black, drilled 6x139.7 (6x5.5) with a 106.1 mm center bore and a +12 mm offset. We list it for the 2024-2026 Ford Ranger Raptor, the Raptor that uses the 6x139.7 bolt pattern.
What BBS publishes. BBS's TS-R Applications PDF lists this wheel (part number TS-R189084P1201) as 18 inch diameter, 9 inch width, 6x139.7, 106.1 center bore, 12 offset, Satin Black, with a load figure of 2500 lb. BBS introduces its TS wheels as 17, 18 and 20 inch off-road wheels for trucks and SUVs.
Backspacing (computed). BBS does not publish backspacing. Computed from the 9 inch width and the +12 mm offset (width / 2 + offset / 25.4), it is about 4.97 in.
Center bore and hub rings. The 106.1 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so this wheel needs hub-centric rings (93.1 mm to 106.1 mm) to center it on the hub. Rings are not included.
Offset. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor offset is +55 mm; this wheel is +12 mm.
Lug nuts. Lug nuts are not included. The Ranger Raptor uses M12x1.5 studs, and BBS does not state a lug seat type for this wheel, so confirm the correct nuts before installing.
Warranty. BBS's warranty page states that structural manufacturing defects are covered for 10 years and the painted finish for 2 years. The warranty is void after impact damage or if the application is not approved by BBS.
Features
- 18x9 with 6x139.7 bolt pattern and 106.1 mm center bore
- +12 mm offset, about 4.97 in computed backspacing
- Satin Black finish
- Load figure of 2500 lb in BBS's Application PDF
- BBS TS series off-road wheel for trucks and SUVs
- 10-year structural and 2-year finish warranty
Fitment: BBS publishes this wheel's specifications (size, bolt pattern, center bore, offset) but no vehicle list for its off-road wheels. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x139.7 with a bore of at least 93.1 mm fits the 2024-2026 Ranger Raptor only. Bore per BBS Application PDF. Check brake, fender and suspension clearance before ordering.
Guides & Manuals
TS-R Applications PDFThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$399.00
The BBS TS-R in Satin Black is a 17x9 wheel drilled 6x135 with an 87.1 mm center bore and a -12 mm offset. BBS lists it in its TS off-road wheel range for trucks and SUVs. On RaptorsOnly.com it is matched to the Ford Raptors that share the 6x135 bolt pattern and 87.1 mm hub: the F-150 Raptor, the F-150 Raptor R and the Bronco Raptor.
Made to match the Raptor hub. BBS lists this wheel with a 6x135 bolt pattern and an 87.1 mm center bore. That is the pattern and hub size Ford uses on these trucks, so the wheel centers on the hub without adapters.
Wide 9 inch stance, deep negative offset. At 17x9 with a -12 mm offset, the wheel sits well out from the factory position and gives a wide, aggressive look. BBS does not publish backspacing for this wheel; computed from its published width and offset it is about 4.03 in (9 in / 2 - 12 mm / 25.4).
Backed by BBS. BBS states that its wheels are warranted against structural manufacturing defects for 10 years and against finish manufacturing defects for 2 years on painted wheels. BBS notes the warranty is void if the application is not approved by BBS, if the wheel shows impact damage, or if the wheel is altered.
Features
- Size: 17x9 in
- Bolt pattern: 6x135
- Center bore: 87.1 mm
- Offset: -12 mm
- Backspacing: about 4.03 in (computed, not published by BBS)
- Finish: Satin Black
- Load rating: 2,500 lb as listed by BBS
- BBS part number: TS-R179089N1201
Fitment: BBS publishes this wheel as 17x9, 6x135, 87.1 mm center bore, -12 mm offset, Satin Black, and lists wheel specifications only, with no vehicle list. It is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm hub. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per BBS Application PDF. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Lug nuts are not part of BBS's listing for this wheel. The F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 lug studs, so choose nuts to match that thread and the wheel's seat.
Guides & Manuals
BBS TS-R Applications (PDF)This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$399.00
The BBS TS-R is a 17x9 off-road wheel in Satin Bronze, drilled 6x139.7 (6x5.5) with a 106.1 mm center bore and a 0 mm offset. We list it for the 2024-2026 Ford Ranger Raptor, the Raptor that uses the 6x139.7 bolt pattern.
What BBS publishes. BBS's TS-R Applications PDF lists this wheel (part number TS-R179084P0002) as 17 inch diameter, 9 inch width, 6x139.7, 106.1 center bore, 0 offset, Satin Bronze, with a load figure of 2500 lb. BBS introduces its TS wheels as 17, 18 and 20 inch off-road wheels for trucks and SUVs.
Backspacing (computed). BBS does not publish backspacing. Computed from the 9 inch width and the 0 mm offset (width / 2 + offset / 25.4), it is about 4.5 in.
Center bore and hub rings. The 106.1 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so this wheel needs hub-centric rings (93.1 mm to 106.1 mm) to center it on the hub. Rings are not included.
Offset. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor offset is +55 mm; this wheel is 0 mm.
Lug nuts. Lug nuts are not included. The Ranger Raptor uses M12x1.5 studs, and BBS does not state a lug seat type for this wheel, so confirm the correct nuts before installing.
Warranty. BBS's warranty page states that structural manufacturing defects are covered for 10 years and the painted finish for 2 years. The warranty is void after impact damage or if the application is not approved by BBS.
Features
- 17x9 with 6x139.7 bolt pattern and 106.1 mm center bore
- 0 mm offset, about 4.5 in computed backspacing
- Satin Bronze finish
- Load figure of 2500 lb in BBS's Application PDF
- BBS TS series off-road wheel for trucks and SUVs
- 10-year structural and 2-year finish warranty
Fitment: BBS publishes this wheel's specifications (size, bolt pattern, center bore, offset) but no vehicle list for its off-road wheels. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x139.7 with a bore of at least 93.1 mm fits the 2024-2026 Ranger Raptor only. Bore per BBS Application PDF. Check brake, fender and suspension clearance before ordering.
Guides & Manuals
TS-R Applications PDFThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$399.00
The BBS TS-R is a 17x9 off-road wheel in Satin Black, drilled 6x139.7 (6x5.5) with a 106.1 mm center bore and a 0 mm offset. We list it for the 2024-2026 Ford Ranger Raptor, the Raptor that uses the 6x139.7 bolt pattern.
What BBS publishes. BBS's TS-R Applications PDF lists this wheel (part number TS-R179084P0001) as 17 inch diameter, 9 inch width, 6x139.7, 106.1 center bore, 0 offset, Satin Black, with a load figure of 2500 lb. BBS introduces its TS wheels as 17, 18 and 20 inch off-road wheels for trucks and SUVs.
Backspacing (computed). BBS does not publish backspacing. Computed from the 9 inch width and the 0 mm offset (width / 2 + offset / 25.4), it is about 4.5 in.
Center bore and hub rings. The 106.1 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so this wheel needs hub-centric rings (93.1 mm to 106.1 mm) to center it on the hub. Rings are not included.
Offset. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor offset is +55 mm; this wheel is 0 mm.
Lug nuts. Lug nuts are not included. The Ranger Raptor uses M12x1.5 studs, and BBS does not state a lug seat type for this wheel, so confirm the correct nuts before installing.
Warranty. BBS's warranty page states that structural manufacturing defects are covered for 10 years and the painted finish for 2 years. The warranty is void after impact damage or if the application is not approved by BBS.
Features
- 17x9 with 6x139.7 bolt pattern and 106.1 mm center bore
- 0 mm offset, about 4.5 in computed backspacing
- Satin Black finish
- Load figure of 2500 lb in BBS's Application PDF
- BBS TS series off-road wheel for trucks and SUVs
- 10-year structural and 2-year finish warranty
Fitment: BBS publishes this wheel's specifications (size, bolt pattern, center bore, offset) but no vehicle list for its off-road wheels. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x139.7 with a bore of at least 93.1 mm fits the 2024-2026 Ranger Raptor only. Bore per BBS Application PDF. Check brake, fender and suspension clearance before ordering.
Guides & Manuals
TS-R Applications PDFThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$399.00
The BBS TS-R is a 17x9 off-road wheel in Satin Silver, drilled 6x139.7 (6x5.5) with a 106.1 mm center bore and a -12 mm offset. We list it for the 2024-2026 Ford Ranger Raptor, the Raptor that uses the 6x139.7 bolt pattern.
What BBS publishes. BBS's TS-R Applications PDF lists this wheel (part number TS-R179084N1203) as 17 inch diameter, 9 inch width, 6x139.7, 106.1 center bore, -12 offset, Satin Silver, with a load figure of 2500 lb. BBS introduces its TS wheels as 17, 18 and 20 inch off-road wheels for trucks and SUVs.
Backspacing (computed). BBS does not publish backspacing. Computed from the 9 inch width and the -12 mm offset (width / 2 + offset / 25.4), it is about 4.03 in.
Center bore and hub rings. The 106.1 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so this wheel needs hub-centric rings (93.1 mm to 106.1 mm) to center it on the hub. Rings are not included.
Offset. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor offset is +55 mm; this wheel is -12 mm.
Lug nuts. Lug nuts are not included. The Ranger Raptor uses M12x1.5 studs, and BBS does not state a lug seat type for this wheel, so confirm the correct nuts before installing.
Warranty. BBS's warranty page states that structural manufacturing defects are covered for 10 years and the painted finish for 2 years. The warranty is void after impact damage or if the application is not approved by BBS.
Features
- 17x9 with 6x139.7 bolt pattern and 106.1 mm center bore
- -12 mm offset, about 4.03 in computed backspacing
- Satin Silver finish
- Load figure of 2500 lb in BBS's Application PDF
- BBS TS series off-road wheel for trucks and SUVs
- 10-year structural and 2-year finish warranty
Fitment: BBS publishes this wheel's specifications (size, bolt pattern, center bore, offset) but no vehicle list for its off-road wheels. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x139.7 with a bore of at least 93.1 mm fits the 2024-2026 Ranger Raptor only. Bore per BBS Application PDF. Check brake, fender and suspension clearance before ordering.
Guides & Manuals
TS-R Applications PDFThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$399.00
The BBS TS-R is a 17x9 off-road wheel in Satin Bronze, drilled 6x139.7 (6x5.5) with a 106.1 mm center bore and a -12 mm offset. We list it for the 2024-2026 Ford Ranger Raptor, the Raptor that uses the 6x139.7 bolt pattern.
What BBS publishes. BBS's TS-R Applications PDF lists this wheel (part number TS-R179084N1202) as 17 inch diameter, 9 inch width, 6x139.7, 106.1 center bore, -12 offset, Satin Bronze, with a load figure of 2500 lb. BBS introduces its TS wheels as 17, 18 and 20 inch off-road wheels for trucks and SUVs.
Backspacing (computed). BBS does not publish backspacing. Computed from the 9 inch width and the -12 mm offset (width / 2 + offset / 25.4), it is about 4.03 in.
Center bore and hub rings. The 106.1 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so this wheel needs hub-centric rings (93.1 mm to 106.1 mm) to center it on the hub. Rings are not included.
Offset. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor offset is +55 mm; this wheel is -12 mm.
Lug nuts. Lug nuts are not included. The Ranger Raptor uses M12x1.5 studs, and BBS does not state a lug seat type for this wheel, so confirm the correct nuts before installing.
Warranty. BBS's warranty page states that structural manufacturing defects are covered for 10 years and the painted finish for 2 years. The warranty is void after impact damage or if the application is not approved by BBS.
Features
- 17x9 with 6x139.7 bolt pattern and 106.1 mm center bore
- -12 mm offset, about 4.03 in computed backspacing
- Satin Bronze finish
- Load figure of 2500 lb in BBS's Application PDF
- BBS TS series off-road wheel for trucks and SUVs
- 10-year structural and 2-year finish warranty
Fitment: BBS publishes this wheel's specifications (size, bolt pattern, center bore, offset) but no vehicle list for its off-road wheels. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x139.7 with a bore of at least 93.1 mm fits the 2024-2026 Ranger Raptor only. Bore per BBS Application PDF. Check brake, fender and suspension clearance before ordering.
Guides & Manuals
TS-R Applications PDFThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$399.00
The BBS TS-R is a 17x9 off-road wheel in Satin Black, drilled 6x139.7 (6x5.5) with a 106.1 mm center bore and a -12 mm offset. We list it for the 2024-2026 Ford Ranger Raptor, the Raptor that uses the 6x139.7 bolt pattern.
What BBS publishes. BBS's TS-R Applications PDF lists this wheel (part number TS-R179084N1201) as 17 inch diameter, 9 inch width, 6x139.7, 106.1 center bore, -12 offset, Satin Black, with a load figure of 2500 lb. BBS introduces its TS wheels as 17, 18 and 20 inch off-road wheels for trucks and SUVs.
Backspacing (computed). BBS does not publish backspacing. Computed from the 9 inch width and the -12 mm offset (width / 2 + offset / 25.4), it is about 4.03 in.
Center bore and hub rings. The 106.1 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so this wheel needs hub-centric rings (93.1 mm to 106.1 mm) to center it on the hub. Rings are not included.
Offset. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor offset is +55 mm; this wheel is -12 mm.
Lug nuts. Lug nuts are not included. The Ranger Raptor uses M12x1.5 studs, and BBS does not state a lug seat type for this wheel, so confirm the correct nuts before installing.
Warranty. BBS's warranty page states that structural manufacturing defects are covered for 10 years and the painted finish for 2 years. The warranty is void after impact damage or if the application is not approved by BBS.
Features
- 17x9 with 6x139.7 bolt pattern and 106.1 mm center bore
- -12 mm offset, about 4.03 in computed backspacing
- Satin Black finish
- Load figure of 2500 lb in BBS's Application PDF
- BBS TS series off-road wheel for trucks and SUVs
- 10-year structural and 2-year finish warranty
Fitment: BBS publishes this wheel's specifications (size, bolt pattern, center bore, offset) but no vehicle list for its off-road wheels. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x139.7 with a bore of at least 93.1 mm fits the 2024-2026 Ranger Raptor only. Bore per BBS Application PDF. Check brake, fender and suspension clearance before ordering.
Guides & Manuals
TS-R Applications PDFThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$449.00
The BBS TS-P in Satin Silver is an 18x9 wheel drilled 6x135 with an 87.1 mm center bore and a 0 mm offset. BBS lists it in its TS off-road wheel range for trucks and SUVs. On RaptorsOnly.com it is matched to the Ford Raptors that share the 6x135 bolt pattern and 87.1 mm hub: the F-150 Raptor, the F-150 Raptor R and the Bronco Raptor.
Made to match the Raptor hub. BBS lists this wheel with a 6x135 bolt pattern and an 87.1 mm center bore. That is the pattern and hub size Ford uses on these trucks, so the wheel centers on the hub without adapters.
Wide 9 inch stance. At 18x9 with a 0 mm offset, the wheel sits further out than the factory wheel and gives a wider, more aggressive look. BBS does not publish backspacing for this wheel; computed from its published width and offset it is about 4.5 in (9 in / 2 + 0 mm / 25.4).
Backed by BBS. BBS states that its wheels are warranted against structural manufacturing defects for 10 years and against finish manufacturing defects for 2 years on painted wheels. BBS notes the warranty is void if the application is not approved by BBS, if the wheel shows impact damage, or if the wheel is altered.
Features
- Size: 18x9 in
- Bolt pattern: 6x135
- Center bore: 87.1 mm
- Offset: 0 mm
- Backspacing: about 4.5 in (computed, not published by BBS)
- Finish: Satin Silver
- Load rating: 2,500 lb as listed by BBS
- BBS part number: TS-P189089P0003
Fitment: BBS publishes this wheel as 18x9, 6x135, 87.1 mm center bore, 0 mm offset, Satin Silver, and lists wheel specifications only, with no vehicle list. It is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm hub. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per BBS Application PDF. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Lug nuts are not part of BBS's listing for this wheel. The F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 lug studs, so choose nuts to match that thread and the wheel's seat.
Guides & Manuals
BBS TS-P Applications (PDF)This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$449.00
The BBS TS-P is an 18x9 off-road wheel in Satin Black, drilled 6x139.7 (6x5.5) with a 106.1 mm center bore and a +12 mm offset. We list it for the 2024-2026 Ford Ranger Raptor, the Raptor that uses the 6x139.7 bolt pattern.
What BBS publishes. BBS's TS-P Applications PDF lists this wheel (part number TS-P189084P1201) as 18 inch diameter, 9 inch width, 6x139.7, 106.1 center bore, 12 offset, Satin Black, with a load figure of 2500 lb. BBS introduces its TS wheels as 17, 18 and 20 inch off-road wheels for trucks and SUVs.
Backspacing (computed). BBS does not publish backspacing. Computed from the 9 inch width and the +12 mm offset (width / 2 + offset / 25.4), it is about 4.97 in.
Center bore and hub rings. The 106.1 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so this wheel needs hub-centric rings (93.1 mm to 106.1 mm) to center it on the hub. Rings are not included.
Offset. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor offset is +55 mm; this wheel is +12 mm.
Lug nuts. Lug nuts are not included. The Ranger Raptor uses M12x1.5 studs, and BBS does not state a lug seat type for this wheel, so confirm the correct nuts before installing.
Warranty. BBS's warranty page states that structural manufacturing defects are covered for 10 years and the painted finish for 2 years. The warranty is void after impact damage or if the application is not approved by BBS.
Features
- 18x9 with 6x139.7 bolt pattern and 106.1 mm center bore
- +12 mm offset, about 4.97 in computed backspacing
- Satin Black finish
- Load figure of 2500 lb in BBS's Application PDF
- BBS TS series off-road wheel for trucks and SUVs
- 10-year structural and 2-year finish warranty
Fitment: BBS publishes this wheel's specifications (size, bolt pattern, center bore, offset) but no vehicle list for its off-road wheels. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x139.7 with a bore of at least 93.1 mm fits the 2024-2026 Ranger Raptor only. Bore per BBS Application PDF. Check brake, fender and suspension clearance before ordering.
Guides & Manuals
TS-P Applications PDFThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$449.00
The BBS TS-P is an 18x9 off-road wheel in Satin Bronze, drilled 6x139.7 (6x5.5) with a 106.1 mm center bore and a 0 mm offset. We list it for the 2024-2026 Ford Ranger Raptor, the Raptor that uses the 6x139.7 bolt pattern.
What BBS publishes. BBS's TS-P Applications PDF lists this wheel (part number TS-P189084P0002) as 18 inch diameter, 9 inch width, 6x139.7, 106.1 center bore, 0 offset, Satin Bronze, with a load figure of 2500 lb. BBS introduces its TS wheels as 17, 18 and 20 inch off-road wheels for trucks and SUVs.
Backspacing (computed). BBS does not publish backspacing. Computed from the 9 inch width and the 0 mm offset (width / 2 + offset / 25.4), it is about 4.5 in.
Center bore and hub rings. The 106.1 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so this wheel needs hub-centric rings (93.1 mm to 106.1 mm) to center it on the hub. Rings are not included.
Offset. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor offset is +55 mm; this wheel is 0 mm.
Lug nuts. Lug nuts are not included. The Ranger Raptor uses M12x1.5 studs, and BBS does not state a lug seat type for this wheel, so confirm the correct nuts before installing.
Warranty. BBS's warranty page states that structural manufacturing defects are covered for 10 years and the painted finish for 2 years. The warranty is void after impact damage or if the application is not approved by BBS.
Features
- 18x9 with 6x139.7 bolt pattern and 106.1 mm center bore
- 0 mm offset, about 4.5 in computed backspacing
- Satin Bronze finish
- Load figure of 2500 lb in BBS's Application PDF
- BBS TS series off-road wheel for trucks and SUVs
- 10-year structural and 2-year finish warranty
Fitment: BBS publishes this wheel's specifications (size, bolt pattern, center bore, offset) but no vehicle list for its off-road wheels. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x139.7 with a bore of at least 93.1 mm fits the 2024-2026 Ranger Raptor only. Bore per BBS Application PDF. Check brake, fender and suspension clearance before ordering.
Guides & Manuals
TS-P Applications PDFThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$399.00
The BBS TS-P in Satin Bronze is a 17x9 wheel drilled 6x135 with an 87.1 mm center bore and a 0 mm offset. BBS lists it in its TS off-road wheel range for trucks and SUVs. On RaptorsOnly.com it is matched to the Ford Raptors that share the 6x135 bolt pattern and 87.1 mm hub: the F-150 Raptor, the F-150 Raptor R and the Bronco Raptor.
Made to match the Raptor hub. BBS lists this wheel with a 6x135 bolt pattern and an 87.1 mm center bore. That is the pattern and hub size Ford uses on these trucks, so the wheel centers on the hub without adapters.
Wide 9 inch stance. At 17x9 with a 0 mm offset, the wheel sits further out than the factory wheel and gives a wider, more aggressive look. BBS does not publish backspacing for this wheel; computed from its published width and offset it is about 4.5 in (9 in / 2 + 0 mm / 25.4).
Backed by BBS. BBS states that its wheels are warranted against structural manufacturing defects for 10 years and against finish manufacturing defects for 2 years on painted wheels. BBS notes the warranty is void if the application is not approved by BBS, if the wheel shows impact damage, or if the wheel is altered.
Features
- Size: 17x9 in
- Bolt pattern: 6x135
- Center bore: 87.1 mm
- Offset: 0 mm
- Backspacing: about 4.5 in (computed, not published by BBS)
- Finish: Satin Bronze
- Load rating: 2,500 lb as listed by BBS
- BBS part number: TS-P179089P0002
Fitment: BBS publishes this wheel as 17x9, 6x135, 87.1 mm center bore, 0 mm offset, Satin Bronze, and lists wheel specifications only, with no vehicle list. It is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm hub. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per BBS Application PDF. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Lug nuts are not part of BBS's listing for this wheel. The F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 lug studs, so choose nuts to match that thread and the wheel's seat.
Guides & Manuals
BBS TS-P Applications (PDF)This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$399.00
The BBS TS-P in Satin Black is a 17x9 wheel drilled 6x135 with an 87.1 mm center bore and a 0 mm offset. BBS lists it in its TS off-road wheel range for trucks and SUVs. On RaptorsOnly.com it is matched to the Ford Raptors that share the 6x135 bolt pattern and 87.1 mm hub: the F-150 Raptor, the F-150 Raptor R and the Bronco Raptor.
Made to match the Raptor hub. BBS lists this wheel with a 6x135 bolt pattern and an 87.1 mm center bore. That is the pattern and hub size Ford uses on these trucks, so the wheel centers on the hub without adapters.
Wide 9 inch stance. At 17x9 with a 0 mm offset, the wheel sits further out than the factory wheel and gives a wider, more aggressive look. BBS does not publish backspacing for this wheel; computed from its published width and offset it is about 4.5 in (9 in / 2 + 0 mm / 25.4).
Backed by BBS. BBS states that its wheels are warranted against structural manufacturing defects for 10 years and against finish manufacturing defects for 2 years on painted wheels. BBS notes the warranty is void if the application is not approved by BBS, if the wheel shows impact damage, or if the wheel is altered.
Features
- Size: 17x9 in
- Bolt pattern: 6x135
- Center bore: 87.1 mm
- Offset: 0 mm
- Backspacing: about 4.5 in (computed, not published by BBS)
- Finish: Satin Black
- Load rating: 2,500 lb as listed by BBS
- BBS part number: TS-P179089P0001
Fitment: BBS publishes this wheel as 17x9, 6x135, 87.1 mm center bore, 0 mm offset, Satin Black, and lists wheel specifications only, with no vehicle list. It is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm hub. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per BBS Application PDF. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Lug nuts are not part of BBS's listing for this wheel. The F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 lug studs, so choose nuts to match that thread and the wheel's seat.
Guides & Manuals
BBS TS-P Applications (PDF)This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$399.00
The BBS TS-P in Satin Bronze is a 17x9 wheel drilled 6x139.7 with a 106.1 mm center bore and a 0 mm offset. BBS lists it in its TS off-road wheel range for trucks and SUVs. On RaptorsOnly.com it is matched to the 2024-2026 Ford Ranger Raptor, the Raptor that uses a 6x139.7 bolt pattern.
Made for the Ranger Raptor bolt pattern. BBS lists this wheel as 6x139.7 (6x5.5) with a 106.1 mm center bore. The Ranger Raptor uses a 6x139.7 pattern and a 93.1 mm hub, so the larger 106.1 mm bore mounts with hub-centric rings sized from 106.1 mm to 93.1 mm. BBS does not list rings with this wheel, so order them separately.
Wide 9 inch stance. At 17x9 with a 0 mm offset, the wheel sits further out than the factory wheel and gives a wider, more aggressive look. BBS does not publish backspacing for this wheel; computed from its published width and offset it is about 4.5 in (9 in / 2 + 0 mm / 25.4).
Backed by BBS. BBS states that its wheels are warranted against structural manufacturing defects for 10 years and against finish manufacturing defects for 2 years on painted wheels. BBS notes the warranty is void if the application is not approved by BBS, if the wheel shows impact damage, or if the wheel is altered.
Features
- Size: 17x9 in
- Bolt pattern: 6x139.7 (6x5.5)
- Center bore: 106.1 mm
- Offset: 0 mm
- Backspacing: about 4.5 in (computed, not published by BBS)
- Finish: Satin Bronze
- Load rating: 2,500 lb as listed by BBS
- BBS part number: TS-P179084P0002
Fitment: BBS publishes this wheel as 17x9, 6x139.7, 106.1 mm center bore, 0 mm offset, Satin Bronze, and lists wheel specifications only, with no vehicle list. It is listed for the Ford Ranger Raptor only, which uses a 6x139.7 bolt pattern and a 93.1 mm hub. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per BBS Application PDF. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory wheel offset is about +55 mm on the Ranger Raptor.
Lug nuts are not part of BBS's listing for this wheel. The Ranger Raptor uses M12x1.5 lug studs, so choose nuts to match that thread and the wheel's seat.
Guides & Manuals
BBS TS-P Applications (PDF)This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$399.00
The BBS TS-P in Satin Black is a 17x9 wheel drilled 6x139.7 with a 106.1 mm center bore and a 0 mm offset. BBS lists it in its TS off-road wheel range for trucks and SUVs. On RaptorsOnly.com it is matched to the 2024-2026 Ford Ranger Raptor, the Raptor that uses a 6x139.7 bolt pattern.
Made for the Ranger Raptor bolt pattern. BBS lists this wheel as 6x139.7 (6x5.5) with a 106.1 mm center bore. The Ranger Raptor uses a 6x139.7 pattern and a 93.1 mm hub, so the larger 106.1 mm bore mounts with hub-centric rings sized from 106.1 mm to 93.1 mm. BBS does not list rings with this wheel, so order them separately.
Wide 9 inch stance. At 17x9 with a 0 mm offset, the wheel sits further out than the factory wheel and gives a wider, more aggressive look. BBS does not publish backspacing for this wheel; computed from its published width and offset it is about 4.5 in (9 in / 2 + 0 mm / 25.4).
Backed by BBS. BBS states that its wheels are warranted against structural manufacturing defects for 10 years and against finish manufacturing defects for 2 years on painted wheels. BBS notes the warranty is void if the application is not approved by BBS, if the wheel shows impact damage, or if the wheel is altered.
Features
- Size: 17x9 in
- Bolt pattern: 6x139.7 (6x5.5)
- Center bore: 106.1 mm
- Offset: 0 mm
- Backspacing: about 4.5 in (computed, not published by BBS)
- Finish: Satin Black
- Load rating: 2,500 lb as listed by BBS
- BBS part number: TS-P179084P0001
Fitment: BBS publishes this wheel as 17x9, 6x139.7, 106.1 mm center bore, 0 mm offset, Satin Black, and lists wheel specifications only, with no vehicle list. It is listed for the Ford Ranger Raptor only, which uses a 6x139.7 bolt pattern and a 93.1 mm hub. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per BBS Application PDF. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory wheel offset is about +55 mm on the Ranger Raptor.
Lug nuts are not part of BBS's listing for this wheel. The Ranger Raptor uses M12x1.5 lug studs, so choose nuts to match that thread and the wheel's seat.
Guides & Manuals
BBS TS-P Applications (PDF)This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$399.00
The BBS TS-P in Satin Bronze is a 17x9 wheel drilled 6x139.7 with a 106.1 mm center bore and a -12 mm offset. BBS lists it in its TS off-road wheel range for trucks and SUVs. On RaptorsOnly.com it is matched to the 2024-2026 Ford Ranger Raptor, the Raptor that uses a 6x139.7 bolt pattern.
Made for the Ranger Raptor bolt pattern. BBS lists this wheel as 6x139.7 (6x5.5) with a 106.1 mm center bore. The Ranger Raptor uses a 6x139.7 pattern and a 93.1 mm hub, so the larger 106.1 mm bore mounts with hub-centric rings sized from 106.1 mm to 93.1 mm. BBS does not list rings with this wheel, so order them separately.
Deep 9 inch stance. At 17x9 with a -12 mm offset, the wheel sits well out from the factory wheel position and gives a wide, aggressive look. BBS does not publish backspacing for this wheel; computed from its published width and offset it is about 4.03 in (9 in / 2 - 12 mm / 25.4).
Backed by BBS. BBS states that its wheels are warranted against structural manufacturing defects for 10 years and against finish manufacturing defects for 2 years on painted wheels. BBS notes the warranty is void if the application is not approved by BBS, if the wheel shows impact damage, or if the wheel is altered.
Features
- Size: 17x9 in
- Bolt pattern: 6x139.7 (6x5.5)
- Center bore: 106.1 mm
- Offset: -12 mm
- Backspacing: about 4.03 in (computed, not published by BBS)
- Finish: Satin Bronze
- Load rating: 2,500 lb as listed by BBS
- BBS part number: TS-P179084N1202
Fitment: BBS publishes this wheel as 17x9, 6x139.7, 106.1 mm center bore, -12 mm offset, Satin Bronze, and lists wheel specifications only, with no vehicle list. It is listed for the Ford Ranger Raptor only, which uses a 6x139.7 bolt pattern and a 93.1 mm hub. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per BBS Application PDF. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory wheel offset is about +55 mm on the Ranger Raptor.
Lug nuts are not part of BBS's listing for this wheel. The Ranger Raptor uses M12x1.5 lug studs, so choose nuts to match that thread and the wheel's seat.
Guides & Manuals
BBS TS-P Applications (PDF)This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$399.00
The BBS TS-P in Satin Black is a 17x9 wheel drilled 6x139.7 with a 106.1 mm center bore and a -12 mm offset. BBS lists it in its TS off-road wheel range for trucks and SUVs. On RaptorsOnly.com it is matched to the 2024-2026 Ford Ranger Raptor, the Raptor that uses a 6x139.7 bolt pattern.
Made for the Ranger Raptor bolt pattern. BBS lists this wheel as 6x139.7 (6x5.5) with a 106.1 mm center bore. The Ranger Raptor uses a 6x139.7 pattern and a 93.1 mm hub, so the larger 106.1 mm bore mounts with hub-centric rings sized from 106.1 mm to 93.1 mm. BBS does not list rings with this wheel, so order them separately.
Deep 9 inch stance. At 17x9 with a -12 mm offset, the wheel sits well out from the factory wheel position and gives a wide, aggressive look. BBS does not publish backspacing for this wheel; computed from its published width and offset it is about 4.03 in (9 in / 2 - 12 mm / 25.4).
Backed by BBS. BBS states that its wheels are warranted against structural manufacturing defects for 10 years and against finish manufacturing defects for 2 years on painted wheels. BBS notes the warranty is void if the application is not approved by BBS, if the wheel shows impact damage, or if the wheel is altered.
Features
- Size: 17x9 in
- Bolt pattern: 6x139.7 (6x5.5)
- Center bore: 106.1 mm
- Offset: -12 mm
- Backspacing: about 4.03 in (computed, not published by BBS)
- Finish: Satin Black
- Load rating: 2,500 lb as listed by BBS
- BBS part number: TS-P179084N1201
Fitment: BBS publishes this wheel as 17x9, 6x139.7, 106.1 mm center bore, -12 mm offset, Satin Black, and lists wheel specifications only, with no vehicle list. It is listed for the Ford Ranger Raptor only, which uses a 6x139.7 bolt pattern and a 93.1 mm hub. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per BBS Application PDF. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory wheel offset is about +55 mm on the Ranger Raptor.
Lug nuts are not part of BBS's listing for this wheel. The Ranger Raptor uses M12x1.5 lug studs, so choose nuts to match that thread and the wheel's seat.
Guides & Manuals
BBS TS-P Applications (PDF)This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$449.00
The BBS TS-M in Satin Silver is an 18x9 wheel drilled 6x139.7 with a 106.1 mm center bore and a 0 mm offset. BBS lists it in its TS off-road wheel range for trucks and SUVs. On RaptorsOnly.com it is matched to the 2024-2026 Ford Ranger Raptor, the Raptor that uses a 6x139.7 bolt pattern.
Made for the Ranger Raptor bolt pattern. BBS lists this wheel as 6x139.7 (6x5.5) with a 106.1 mm center bore. The Ranger Raptor uses a 6x139.7 pattern and a 93.1 mm hub, so the larger 106.1 mm bore mounts with hub-centric rings sized from 106.1 mm to 93.1 mm. BBS does not list rings with this wheel, so order them separately.
Wide 9 inch stance. At 18x9 with a 0 mm offset, the wheel sits further out than the factory wheel and gives a wider, more aggressive look. BBS does not publish backspacing for this wheel; computed from its published width and offset it is about 4.5 in (9 in / 2 + 0 mm / 25.4).
Backed by BBS. BBS states that its wheels are warranted against structural manufacturing defects for 10 years and against finish manufacturing defects for 2 years on painted wheels. BBS notes the warranty is void if the application is not approved by BBS, if the wheel shows impact damage, or if the wheel is altered.
Features
- Size: 18x9 in
- Bolt pattern: 6x139.7 (6x5.5)
- Center bore: 106.1 mm
- Offset: 0 mm
- Backspacing: about 4.5 in (computed, not published by BBS)
- Finish: Satin Silver
- Load rating: 2,500 lb as listed by BBS
- BBS part number: TS-M189084P0003
Fitment: BBS publishes this wheel as 18x9, 6x139.7, 106.1 mm center bore, 0 mm offset, Satin Silver, and lists wheel specifications only, with no vehicle list. It is listed for the Ford Ranger Raptor only, which uses a 6x139.7 bolt pattern and a 93.1 mm hub. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per BBS Application PDF. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory wheel offset is about +55 mm on the Ranger Raptor.
Lug nuts are not part of BBS's listing for this wheel. The Ranger Raptor uses M12x1.5 lug studs, so choose nuts to match that thread and the wheel's seat.
Guides & Manuals
BBS TS-M Applications (PDF)This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$449.00
The BBS TS-M in Satin Bronze is an 18x9 wheel drilled 6x139.7 with a 106.1 mm center bore and a 0 mm offset. BBS lists it in its TS off-road wheel range for trucks and SUVs. On RaptorsOnly.com it is matched to the 2024-2026 Ford Ranger Raptor, the Raptor that uses a 6x139.7 bolt pattern.
Made for the Ranger Raptor bolt pattern. BBS lists this wheel as 6x139.7 (6x5.5) with a 106.1 mm center bore. The Ranger Raptor uses a 6x139.7 pattern and a 93.1 mm hub, so the larger 106.1 mm bore mounts with hub-centric rings sized from 106.1 mm to 93.1 mm. BBS does not list rings with this wheel, so order them separately.
Wide 9 inch stance. At 18x9 with a 0 mm offset, the wheel sits further out than the factory wheel and gives a wider, more aggressive look. BBS does not publish backspacing for this wheel; computed from its published width and offset it is about 4.5 in (9 in / 2 + 0 mm / 25.4).
Backed by BBS. BBS states that its wheels are warranted against structural manufacturing defects for 10 years and against finish manufacturing defects for 2 years on painted wheels. BBS notes the warranty is void if the application is not approved by BBS, if the wheel shows impact damage, or if the wheel is altered.
Features
- Size: 18x9 in
- Bolt pattern: 6x139.7 (6x5.5)
- Center bore: 106.1 mm
- Offset: 0 mm
- Backspacing: about 4.5 in (computed, not published by BBS)
- Finish: Satin Bronze
- Load rating: 2,500 lb as listed by BBS
- BBS part number: TS-M189084P0002
Fitment: BBS publishes this wheel as 18x9, 6x139.7, 106.1 mm center bore, 0 mm offset, Satin Bronze, and lists wheel specifications only, with no vehicle list. It is listed for the Ford Ranger Raptor only, which uses a 6x139.7 bolt pattern and a 93.1 mm hub. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per BBS Application PDF. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory wheel offset is about +55 mm on the Ranger Raptor.
Lug nuts are not part of BBS's listing for this wheel. The Ranger Raptor uses M12x1.5 lug studs, so choose nuts to match that thread and the wheel's seat.
Guides & Manuals
BBS TS-M Applications (PDF)This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$449.00
The BBS TS-M in Satin Black is an 18x9 wheel drilled 6x139.7 with a 106.1 mm center bore and a 0 mm offset. BBS lists it in its TS off-road wheel range for trucks and SUVs. On RaptorsOnly.com it is matched to the 2024-2026 Ford Ranger Raptor, the Raptor that uses a 6x139.7 bolt pattern.
Made for the Ranger Raptor bolt pattern. BBS lists this wheel as 6x139.7 (6x5.5) with a 106.1 mm center bore. The Ranger Raptor uses a 6x139.7 pattern and a 93.1 mm hub, so the larger 106.1 mm bore mounts with hub-centric rings sized from 106.1 mm to 93.1 mm. BBS does not list rings with this wheel, so order them separately.
Wide 9 inch stance. At 18x9 with a 0 mm offset, the wheel sits further out than the factory wheel and gives a wider, more aggressive look. BBS does not publish backspacing for this wheel; computed from its published width and offset it is about 4.5 in (9 in / 2 + 0 mm / 25.4).
Backed by BBS. BBS states that its wheels are warranted against structural manufacturing defects for 10 years and against finish manufacturing defects for 2 years on painted wheels. BBS notes the warranty is void if the application is not approved by BBS, if the wheel shows impact damage, or if the wheel is altered.
Features
- Size: 18x9 in
- Bolt pattern: 6x139.7 (6x5.5)
- Center bore: 106.1 mm
- Offset: 0 mm
- Backspacing: about 4.5 in (computed, not published by BBS)
- Finish: Satin Black
- Load rating: 2,500 lb as listed by BBS
- BBS part number: TS-M189084P0001
Fitment: BBS publishes this wheel as 18x9, 6x139.7, 106.1 mm center bore, 0 mm offset, Satin Black, and lists wheel specifications only, with no vehicle list. It is listed for the Ford Ranger Raptor only, which uses a 6x139.7 bolt pattern and a 93.1 mm hub. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per BBS Application PDF. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory wheel offset is about +55 mm on the Ranger Raptor.
Lug nuts are not part of BBS's listing for this wheel. The Ranger Raptor uses M12x1.5 lug studs, so choose nuts to match that thread and the wheel's seat.
Guides & Manuals
BBS TS-M Applications (PDF)This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$399.00
The BBS TS-M in Satin Silver is a 17x9 wheel drilled 6x135 with an 87.1 mm center bore and a 0 mm offset. BBS lists it in its TS off-road wheel range for trucks and SUVs. On RaptorsOnly.com it is matched to the Ford Raptors that share the 6x135 bolt pattern and 87.1 mm hub: the F-150 Raptor, the F-150 Raptor R and the Bronco Raptor.
Made to match the Raptor hub. BBS lists this wheel with a 6x135 bolt pattern and an 87.1 mm center bore. That is the pattern and hub size Ford uses on these trucks, so the wheel centers on the hub without adapters.
Wide 9 inch stance. At 17x9 with a 0 mm offset, the wheel sits further out than the factory wheel and gives a wider, more aggressive look. BBS does not publish backspacing for this wheel; computed from its published width and offset it is about 4.5 in (9 in / 2 + 0 mm / 25.4).
Backed by BBS. BBS states that its wheels are warranted against structural manufacturing defects for 10 years and against finish manufacturing defects for 2 years on painted wheels. BBS notes the warranty is void if the application is not approved by BBS, if the wheel shows impact damage, or if the wheel is altered.
Features
- Size: 17x9 in
- Bolt pattern: 6x135
- Center bore: 87.1 mm
- Offset: 0 mm
- Backspacing: about 4.5 in (computed, not published by BBS)
- Finish: Satin Silver
- Load rating: 2,500 lb as listed by BBS
- BBS part number: TS-M179089P0003
Fitment: BBS publishes this wheel as 17x9, 6x135, 87.1 mm center bore, 0 mm offset, Satin Silver, and lists wheel specifications only, with no vehicle list. It is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm hub. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per BBS Application PDF. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Lug nuts are not part of BBS's listing for this wheel. The F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 lug studs, so choose nuts to match that thread and the wheel's seat.
Guides & Manuals
BBS TS-M Applications (PDF)This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$399.00
The BBS TS-M is a 17x9 off-road wheel in Satin Bronze, drilled 6x135 with an 87.1 mm center bore and a 0 mm offset. We list it for the Ford Raptors that use the 6x135 bolt pattern: the 2017-2026 F-150 Raptor, the 2023-2026 F-150 Raptor R and the 2022-2026 Bronco Raptor.
What BBS publishes. BBS's TS-M Applications PDF lists this wheel (part number TS-M179089P0002) as 17 inch diameter, 9 inch width, 6x135, 87.1 center bore, 0 offset, Satin Bronze, with a load figure of 2500 lb. BBS introduces its TS wheels as 17, 18 and 20 inch off-road wheels for trucks and SUVs. The photo is BBS's picture of the TS-M design in Satin Bronze (shown in 18x9); this listing is the 17x9.
Backspacing (computed). BBS does not publish backspacing. Computed from the 9 inch width and the 0 mm offset (width / 2 + offset / 25.4), it is 4.5 in.
Center bore. The 87.1 mm bore matches the 87.1 mm hub size in Ford's Raptor 6x135 specs, so no hub rings are needed.
Offset. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on these Raptors is about +34 mm; this wheel is 0 mm.
Lug nuts. Lug nuts are not included. These Raptors use M14x1.5 studs, and BBS does not state a lug seat type for this wheel, so confirm the correct nuts before installing.
Warranty. BBS's warranty page states that structural manufacturing defects are covered for 10 years and the painted finish for 2 years. The warranty is void after impact damage or if the application is not approved by BBS.
Features
- 17x9 with 6x135 bolt pattern and 87.1 mm center bore
- 0 mm offset, 4.5 in computed backspacing
- Satin Bronze finish
- Load figure of 2500 lb in BBS's Application PDF
- BBS TS series off-road wheel for trucks and SUVs
- 10-year structural and 2-year finish warranty
Fitment: BBS publishes this wheel's specifications (size, bolt pattern, center bore, offset) but no vehicle list for its off-road wheels. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x135 with a bore of at least 87.1 mm fits the F-150 Raptor, F-150 Raptor R and Bronco Raptor. Bore per BBS Application PDF. Check brake, fender and suspension clearance before ordering.
Guides & Manuals
TS-M Applications PDFThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$399.00
The BBS TS-M is a 17x9 off-road wheel in Satin Black, drilled 6x135 with an 87.1 mm center bore and a 0 mm offset. We list it for the Ford Raptors that use the 6x135 bolt pattern: the 2017-2026 F-150 Raptor, the 2023-2026 F-150 Raptor R and the 2022-2026 Bronco Raptor.
What BBS publishes. BBS's TS-M Applications PDF lists this wheel (part number TS-M179089P0001) as 17 inch diameter, 9 inch width, 6x135, 87.1 center bore, 0 offset, Satin Black, with a load figure of 2500 lb. BBS introduces its TS wheels as 17, 18 and 20 inch off-road wheels for trucks and SUVs. The photo is BBS's picture of the TS-M design in Satin Black (shown in 18x9); this listing is the 17x9.
Backspacing (computed). BBS does not publish backspacing. Computed from the 9 inch width and the 0 mm offset (width / 2 + offset / 25.4), it is 4.5 in.
Center bore. The 87.1 mm bore matches the 87.1 mm hub size in Ford's Raptor 6x135 specs, so no hub rings are needed.
Offset. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on these Raptors is about +34 mm; this wheel is 0 mm.
Lug nuts. Lug nuts are not included. These Raptors use M14x1.5 studs, and BBS does not state a lug seat type for this wheel, so confirm the correct nuts before installing.
Warranty. BBS's warranty page states that structural manufacturing defects are covered for 10 years and the painted finish for 2 years. The warranty is void after impact damage or if the application is not approved by BBS.
Features
- 17x9 with 6x135 bolt pattern and 87.1 mm center bore
- 0 mm offset, 4.5 in computed backspacing
- Satin Black finish
- Load figure of 2500 lb in BBS's Application PDF
- BBS TS series off-road wheel for trucks and SUVs
- 10-year structural and 2-year finish warranty
Fitment: BBS publishes this wheel's specifications (size, bolt pattern, center bore, offset) but no vehicle list for its off-road wheels. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x135 with a bore of at least 87.1 mm fits the F-150 Raptor, F-150 Raptor R and Bronco Raptor. Bore per BBS Application PDF. Check brake, fender and suspension clearance before ordering.
Guides & Manuals
TS-M Applications PDFThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$399.00
The BBS TS-M is a 17x9 off-road wheel in Satin Black, drilled 6x135 with an 87.1 mm center bore and a -12 mm offset. We list it for the Ford Raptors that use the 6x135 bolt pattern: the 2017-2026 F-150 Raptor, the 2023-2026 F-150 Raptor R and the 2022-2026 Bronco Raptor.
What BBS publishes. BBS's TS-M Applications PDF lists this wheel (part number TS-M179089N1201) as 17 inch diameter, 9 inch width, 6x135, 87.1 center bore, -12 offset, Satin Black, with a load figure of 2500 lb. BBS introduces its TS wheels as 17, 18 and 20 inch off-road wheels for trucks and SUVs. The photo is BBS's picture of the TS-M design in Satin Black (shown in 18x9); this listing is the 17x9.
Backspacing (computed). BBS does not publish backspacing. Computed from the 9 inch width and the -12 mm offset (width / 2 + offset / 25.4), it is about 4.03 in.
Center bore. The 87.1 mm bore matches the 87.1 mm hub size in Ford's Raptor 6x135 specs, so no hub rings are needed.
Offset. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on these Raptors is about +34 mm; this wheel is -12 mm.
Lug nuts. Lug nuts are not included. These Raptors use M14x1.5 studs, and BBS does not state a lug seat type for this wheel, so confirm the correct nuts before installing.
Warranty. BBS's warranty page states that structural manufacturing defects are covered for 10 years and the painted finish for 2 years. The warranty is void after impact damage or if the application is not approved by BBS.
Features
- 17x9 with 6x135 bolt pattern and 87.1 mm center bore
- -12 mm offset, about 4.03 in computed backspacing
- Satin Black finish
- Load figure of 2500 lb in BBS's Application PDF
- BBS TS series off-road wheel for trucks and SUVs
- 10-year structural and 2-year finish warranty
Fitment: BBS publishes this wheel's specifications (size, bolt pattern, center bore, offset) but no vehicle list for its off-road wheels. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x135 with a bore of at least 87.1 mm fits the F-150 Raptor, F-150 Raptor R and Bronco Raptor. Bore per BBS Application PDF. Check brake, fender and suspension clearance before ordering.
Guides & Manuals
TS-M Applications PDFThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$399.00
The BBS TS-M is a 17x9 off-road wheel in Satin Silver, drilled 6x139.7 (6x5.5) with a 106.1 mm center bore and a 0 mm offset. We list it for the 2024-2026 Ford Ranger Raptor, the Raptor that uses the 6x139.7 bolt pattern.
What BBS publishes. BBS's TS-M Applications PDF lists this wheel (part number TS-M179084P0003) as 17 inch diameter, 9 inch width, 6x139.7, 106.1 center bore, 0 offset, Satin Silver, with a load figure of 2500 lb. BBS introduces its TS wheels as 17, 18 and 20 inch off-road wheels for trucks and SUVs. The photo is BBS's picture of the TS-M design in Satin Silver (shown in 18x9); this listing is the 17x9.
Backspacing (computed). BBS does not publish backspacing. Computed from the 9 inch width and the 0 mm offset (width / 2 + offset / 25.4), it is 4.5 in.
Center bore and hub rings. The 106.1 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so this wheel needs hub-centric rings (93.1 mm to 106.1 mm) to center it on the hub. Rings are not included.
Offset. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor offset is +55 mm; this wheel is 0 mm.
Lug nuts. Lug nuts are not included. The Ranger Raptor uses M12x1.5 studs, and BBS does not state a lug seat type for this wheel, so confirm the correct nuts before installing.
Warranty. BBS's warranty page states that structural manufacturing defects are covered for 10 years and the painted finish for 2 years. The warranty is void after impact damage or if the application is not approved by BBS.
Features
- 17x9 with 6x139.7 bolt pattern and 106.1 mm center bore
- 0 mm offset, 4.5 in computed backspacing
- Satin Silver finish
- Load figure of 2500 lb in BBS's Application PDF
- BBS TS series off-road wheel for trucks and SUVs
- 10-year structural and 2-year finish warranty
Fitment: BBS publishes this wheel's specifications (size, bolt pattern, center bore, offset) but no vehicle list for its off-road wheels. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x139.7 with a bore of at least 93.1 mm fits the 2024-2026 Ranger Raptor only. Bore per BBS Application PDF. Check brake, fender and suspension clearance before ordering.
Guides & Manuals
TS-M Applications PDFThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$399.00
The BBS TS-M is a 17x9 off-road wheel in Satin Black, drilled 6x139.7 (6x5.5) with a 106.1 mm center bore and a 0 mm offset. We list it for the 2024-2026 Ford Ranger Raptor, the Raptor that uses the 6x139.7 bolt pattern.
What BBS publishes. BBS's TS-M Applications PDF lists this wheel (part number TS-M179084P0001) as 17 inch diameter, 9 inch width, 6x139.7, 106.1 center bore, 0 offset, Satin Black, with a load figure of 2500 lb. BBS introduces its TS wheels as 17, 18 and 20 inch off-road wheels for trucks and SUVs. The photo is BBS's picture of the TS-M design in Satin Black (shown in 18x9); this listing is the 17x9.
Backspacing (computed). BBS does not publish backspacing. Computed from the 9 inch width and the 0 mm offset (width / 2 + offset / 25.4), it is 4.5 in.
Center bore and hub rings. The 106.1 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so this wheel needs hub-centric rings (93.1 mm to 106.1 mm) to center it on the hub. Rings are not included.
Offset. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor offset is +55 mm; this wheel is 0 mm.
Lug nuts. Lug nuts are not included. The Ranger Raptor uses M12x1.5 studs, and BBS does not state a lug seat type for this wheel, so confirm the correct nuts before installing.
Warranty. BBS's warranty page states that structural manufacturing defects are covered for 10 years and the painted finish for 2 years. The warranty is void after impact damage or if the application is not approved by BBS.
Features
- 17x9 with 6x139.7 bolt pattern and 106.1 mm center bore
- 0 mm offset, 4.5 in computed backspacing
- Satin Black finish
- Load figure of 2500 lb in BBS's Application PDF
- BBS TS series off-road wheel for trucks and SUVs
- 10-year structural and 2-year finish warranty
Fitment: BBS publishes this wheel's specifications (size, bolt pattern, center bore, offset) but no vehicle list for its off-road wheels. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x139.7 with a bore of at least 93.1 mm fits the 2024-2026 Ranger Raptor only. Bore per BBS Application PDF. Check brake, fender and suspension clearance before ordering.
Guides & Manuals
TS-M Applications PDFThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$399.00
The BBS TS-M is a 17x9 off-road wheel in Satin Silver, drilled 6x139.7 (6x5.5) with a 106.1 mm center bore and a -12 mm offset. We list it for the 2024-2026 Ford Ranger Raptor, the Raptor that uses the 6x139.7 bolt pattern.
What BBS publishes. BBS's TS-M Applications PDF lists this wheel (part number TS-M179084N1203) as 17 inch diameter, 9 inch width, 6x139.7, 106.1 center bore, -12 offset, Satin Silver, with a load figure of 2500 lb. BBS introduces its TS wheels as 17, 18 and 20 inch off-road wheels for trucks and SUVs. The photo is BBS's picture of the TS-M design in Satin Silver (shown in 18x9); this listing is the 17x9.
Backspacing (computed). BBS does not publish backspacing. Computed from the 9 inch width and the -12 mm offset (width / 2 + offset / 25.4), it is about 4.03 in.
Center bore and hub rings. The 106.1 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so this wheel needs hub-centric rings (93.1 mm to 106.1 mm) to center it on the hub. Rings are not included.
Offset. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor offset is +55 mm; this wheel is -12 mm.
Lug nuts. Lug nuts are not included. The Ranger Raptor uses M12x1.5 studs, and BBS does not state a lug seat type for this wheel, so confirm the correct nuts before installing.
Warranty. BBS's warranty page states that structural manufacturing defects are covered for 10 years and the painted finish for 2 years. The warranty is void after impact damage or if the application is not approved by BBS.
Features
- 17x9 with 6x139.7 bolt pattern and 106.1 mm center bore
- -12 mm offset, about 4.03 in computed backspacing
- Satin Silver finish
- Load figure of 2500 lb in BBS's Application PDF
- BBS TS series off-road wheel for trucks and SUVs
- 10-year structural and 2-year finish warranty
Fitment: BBS publishes this wheel's specifications (size, bolt pattern, center bore, offset) but no vehicle list for its off-road wheels. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x139.7 with a bore of at least 93.1 mm fits the 2024-2026 Ranger Raptor only. Bore per BBS Application PDF. Check brake, fender and suspension clearance before ordering.
Guides & Manuals
TS-M Applications PDFThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$399.00
The BBS TS-M is a 17x9 off-road wheel in Satin Black, drilled 6x139.7 (6x5.5) with a 106.1 mm center bore and a -12 mm offset. We list it for the 2024-2026 Ford Ranger Raptor, the Raptor that uses the 6x139.7 bolt pattern.
What BBS publishes. BBS's TS-M Applications PDF lists this wheel (part number TS-M179084N1201) as 17 inch diameter, 9 inch width, 6x139.7, 106.1 center bore, -12 offset, Satin Black, with a load figure of 2500 lb. BBS introduces its TS wheels as 17, 18 and 20 inch off-road wheels for trucks and SUVs. The photo is BBS's picture of the TS-M design in Satin Black (shown in 18x9); this listing is the 17x9.
Backspacing (computed). BBS does not publish backspacing. Computed from the 9 inch width and the -12 mm offset (width / 2 + offset / 25.4), it is about 4.03 in.
Center bore and hub rings. The 106.1 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so this wheel needs hub-centric rings (93.1 mm to 106.1 mm) to center it on the hub. Rings are not included.
Offset. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor offset is +55 mm; this wheel is -12 mm.
Lug nuts. Lug nuts are not included. The Ranger Raptor uses M12x1.5 studs, and BBS does not state a lug seat type for this wheel, so confirm the correct nuts before installing.
Warranty. BBS's warranty page states that structural manufacturing defects are covered for 10 years and the painted finish for 2 years. The warranty is void after impact damage or if the application is not approved by BBS.
Features
- 17x9 with 6x139.7 bolt pattern and 106.1 mm center bore
- -12 mm offset, about 4.03 in computed backspacing
- Satin Black finish
- Load figure of 2500 lb in BBS's Application PDF
- BBS TS series off-road wheel for trucks and SUVs
- 10-year structural and 2-year finish warranty
Fitment: BBS publishes this wheel's specifications (size, bolt pattern, center bore, offset) but no vehicle list for its off-road wheels. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x139.7 with a bore of at least 93.1 mm fits the 2024-2026 Ranger Raptor only. Bore per BBS Application PDF. Check brake, fender and suspension clearance before ordering.
Guides & Manuals
TS-M Applications PDFThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$399.00
The BBS TS-C is a 17x9 off-road wheel in Satin Bronze, drilled 6x135 with an 87.1 mm center bore and a 0 mm offset. We list it for the Ford Raptors that use the 6x135 bolt pattern: the 2017-2026 F-150 Raptor, the 2023-2026 F-150 Raptor R and the 2022-2026 Bronco Raptor.
What BBS publishes. BBS's TS-C Applications PDF lists this wheel (part number TS-C179089P0002) as 17 inch diameter, 9 inch width, 6x135, 87.1 center bore, 0 offset, Satin Bronze, with a load figure of 2500 lb. BBS introduces its TS wheels as 17, 18 and 20 inch off-road wheels for trucks and SUVs.
Backspacing (computed). BBS does not publish backspacing. Computed from the 9 inch width and the 0 mm offset (width / 2 + offset / 25.4), it is 4.5 in.
Center bore. The 87.1 mm bore matches the 87.1 mm hub size in Ford's Raptor 6x135 specs, so no hub rings are needed.
Offset. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on these Raptors is about +34 mm; this wheel is 0 mm.
Lug nuts. Lug nuts are not included. These Raptors use M14x1.5 studs, and BBS does not state a lug seat type for this wheel, so confirm the correct nuts before installing.
Warranty. BBS's warranty page states that structural manufacturing defects are covered for 10 years and the painted finish for 2 years. The warranty is void after impact damage or if the application is not approved by BBS.
Features
- 17x9 with 6x135 bolt pattern and 87.1 mm center bore
- 0 mm offset, 4.5 in computed backspacing
- Satin Bronze finish
- Load figure of 2500 lb in BBS's Application PDF
- BBS TS series off-road wheel for trucks and SUVs
- 10-year structural and 2-year finish warranty
Fitment: BBS publishes this wheel's specifications (size, bolt pattern, center bore, offset) but no vehicle list for its off-road wheels. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x135 with a bore of at least 87.1 mm fits the F-150 Raptor, F-150 Raptor R and Bronco Raptor. Bore per BBS Application PDF. Check brake, fender and suspension clearance before ordering.
Guides & Manuals
TS-C Applications PDFThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$399.00
The BBS TS-C is a 17x9 off-road wheel in Satin Bronze, drilled 6x139.7 (6x5.5) with a 106.1 mm center bore and a 0 mm offset. We list it for the 2024-2026 Ford Ranger Raptor, the Raptor that uses the 6x139.7 bolt pattern.
What BBS publishes. BBS's TS-C Applications PDF lists this wheel (part number TS-C179084P0002) as 17 inch diameter, 9 inch width, 6x139.7, 106.1 center bore, 0 offset, Satin Bronze, with a load figure of 2500 lb. BBS introduces its TS wheels as 17, 18 and 20 inch off-road wheels for trucks and SUVs.
Backspacing (computed). BBS does not publish backspacing. Computed from the 9 inch width and the 0 mm offset (width / 2 + offset / 25.4), it is 4.5 in.
Center bore and hub rings. The 106.1 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so this wheel needs hub-centric rings (93.1 mm to 106.1 mm) to center it on the hub. Rings are not included.
Offset. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor offset is +55 mm; this wheel is 0 mm.
Lug nuts. Lug nuts are not included. The Ranger Raptor uses M12x1.5 studs, and BBS does not state a lug seat type for this wheel, so confirm the correct nuts before installing.
Warranty. BBS's warranty page states that structural manufacturing defects are covered for 10 years and the painted finish for 2 years. The warranty is void after impact damage or if the application is not approved by BBS.
Features
- 17x9 with 6x139.7 bolt pattern and 106.1 mm center bore
- 0 mm offset, 4.5 in computed backspacing
- Satin Bronze finish
- Load figure of 2500 lb in BBS's Application PDF
- BBS TS series off-road wheel for trucks and SUVs
- 10-year structural and 2-year finish warranty
Fitment: BBS publishes this wheel's specifications (size, bolt pattern, center bore, offset) but no vehicle list for its off-road wheels. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x139.7 with a bore of at least 93.1 mm fits the 2024-2026 Ranger Raptor only. Bore per BBS Application PDF. Check brake, fender and suspension clearance before ordering.
Guides & Manuals
TS-C Applications PDFThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$399.00
The BBS TS-C is a 17x9 off-road wheel in Satin Black, drilled 6x139.7 (6x5.5) with a 106.1 mm center bore and a -12 mm offset. We list it for the 2024-2026 Ford Ranger Raptor, the Raptor that uses the 6x139.7 bolt pattern.
What BBS publishes. BBS's TS-C Applications PDF lists this wheel (part number TS-C179084N1201) as 17 inch diameter, 9 inch width, 6x139.7, 106.1 center bore, -12 offset, Satin Black, with a load figure of 2500 lb. BBS introduces its TS wheels as 17, 18 and 20 inch off-road wheels for trucks and SUVs.
Backspacing (computed). BBS does not publish backspacing. Computed from the 9 inch width and the -12 mm offset (width / 2 + offset / 25.4), it is about 4.03 in.
Center bore and hub rings. The 106.1 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so this wheel needs hub-centric rings (93.1 mm to 106.1 mm) to center it on the hub. Rings are not included.
Offset. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor offset is +55 mm; this wheel is -12 mm.
Lug nuts. Lug nuts are not included. The Ranger Raptor uses M12x1.5 studs, and BBS does not state a lug seat type for this wheel, so confirm the correct nuts before installing.
Warranty. BBS's warranty page states that structural manufacturing defects are covered for 10 years and the painted finish for 2 years. The warranty is void after impact damage or if the application is not approved by BBS.
Features
- 17x9 with 6x139.7 bolt pattern and 106.1 mm center bore
- -12 mm offset, about 4.03 in computed backspacing
- Satin Black finish
- Load figure of 2500 lb in BBS's Application PDF
- BBS TS series off-road wheel for trucks and SUVs
- 10-year structural and 2-year finish warranty
Fitment: BBS publishes this wheel's specifications (size, bolt pattern, center bore, offset) but no vehicle list for its off-road wheels. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x139.7 with a bore of at least 93.1 mm fits the 2024-2026 Ranger Raptor only. Bore per BBS Application PDF. Check brake, fender and suspension clearance before ordering.
Guides & Manuals
TS-C Applications PDFThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.