Welcome to RaptorsOnly.com
-
Brands
Shop by brand
- 3D MAXpider
- Access
- Addictive Desert Designs
- Advan
- AEM Induction
- aFe
- Air Lift
- Airaid
- Alcon
- AlphaRex
- AMP Research
- AMS
- Anderson Composites
- ANZO
- ARB
- Atturo Tire
- AutoMeter
- AVS
- AWE Tuning
- BackRack
- Baer Brakes
- Baja Designs
- BAK
- Banks Power
- BBK
- BBS
- BD Diesel
- Belltech
- Bestop
- BFGoodrich
- BMC
- Body Armor 4x4
- Borla
- Brembo
- Brembo OE
- Bully Dog
- Bushwacker
- Camburg
- Clevite
- COBB
- Cometic Gasket
- COMP Cams
- CORSA Performance
- Covercraft
- CSF
- DBA
- DeatschWerks
- DFC
- Diode Dynamics
- DS18
- DV8 Offroad
- Eaton
- EBC
- Eibach
- Enkei
- Extang
- Fabtech
- Fel-Pro
- fifteen52
- Firestone
- Flowmaster
- Ford Racing
- Forgestar
- FORM Lighting
- FOX
- Garrett
- Gates
- GEN-Y Hitch
- Go Fast Bits
- Go Rhino
- Gram Lights
- Granatelli Motor Sports
- GSC Power Division
- Hawk Performance
- Hella
- Hellwig
- Hotchkis
- Husky Liners
- ICON
- Injen
- J&L
- JBA
- JLT
- K&N Engineering
- KC HiLiTES
- King Engine Bearings
- King Shocks
- Kleinn Air Horns
- Kooks Headers
- KYB
- LIQUI MOLY
- LUND
- Magnaflow
- Mahle OE
- Maxtrac
- Mayhem
- MBRP
- McGard
- Method Wheels
- MGP
- Michelin
- Mickey Thompson
- Mishimoto
- Moog
- Motul
- MTX Wheels
- N-Fab
- Nacho Offroad Technology
- NGK
- Nitrous Express
- Odyssey Battery
- ORACLE Lighting
- PowerStop
- Putco
- QA1
- Raceline
- Radium Engineering
- Rally Armor
- Rampage
- Raxiom
- Retrax
- Rhino-Rack
- Ridetech
- Rigid Industries
- Rival 4x4
- RockJock
- Roll-N-Lock
- Roush
- Royal Purple
- SCT Performance
- Skyjacker
- Snow Performance
- SPC Performance
- SPOD
- Stainless Works
- Superlift
- Superpro
- Timbren
- Torque Solution
- TOYO
- Truxedo
- Tuff Country
- Turbosmart
- UMI Performance
- Undercover
- Volant
- Vossen
- Wagner Tuning
- WeatherTech
- Weld
- Westin
- Whiteline
- Wilwood
- Yokohama Tire
- Yukon Gear & Axle
- Zone Offroad
No brands found. Try another name or initial.
156 brands
View all brands -
F-150 Raptor
- F-150 Raptor
-
1st Gen (2010-2014)
-
2nd Gen (2017-2020)
-
3rd Gen (2021-Present)
-
Raptor R (2023-Present)
-
Bronco Raptor
- Bronco Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
-
Ranger Raptor
- Ranger Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
Your cart
You'll love this too
Discount invalid. Please make sure the discount details are correct.
Discount code is already applied.
Discount applied!
Subheading
Product comparison
Describe you product comparison grid
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
Find wheels and tires that fit your Raptor
Pick your truck and we'll narrow the catalogue to the wheels drilled for your bolt pattern and the tire sizes that fit your rims.
Shopping for
- Bolt pattern
- Hub bore
- Factory tire
365 products
365 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$409.00
The Method MR704 Bead Grip is a 17x8.5 six-lug wheel in matte black, drilled 6x5.5 (6x139.7) with a 0mm offset and 4.75 in backspacing. Method lists it as part number MR70478560500. Method describes the 704 as a Bead Grip wheel with a timeless 12-spoke design, developed for off-road enthusiasts and built for rough trails, deserts and overland adventures.
Bead Grip Technology. Method says Bead Grip lets you run tire pressures that used to need a beadlock wheel without the tire coming off the bead. Lower pressure puts more tire on the ground for traction on loose surfaces and softens the ride.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x5.5 (6x139.7)
- Offset 0mm, backspacing 4.75 in
- Center bore 106.25 mm
- Finish: matte black
- Bead Grip Technology (per Method)
Fitment: Method publishes this wheel as 17x8.5, 6x5.5, 0mm offset, 4.75in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore is the one shown in the product title. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. Factory offset on the Ranger Raptor is +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$409.00
The Method MR703 Bead Grip is a 17x9 six-lug wheel in Method Bronze, drilled 6x5.5 (6x139.7) with a -12mm offset and 4.57 in backspacing. Method lists it as part number MR70379060912N. Method describes the 703 as a Bead Grip wheel developed for off-road enthusiasts and built for the toughest trails and overland adventures, with a 12-window design and two debossed METHOD logos.
Bead Grip Technology. Method says Bead Grip lets you run tire pressures that used to need a beadlock wheel without the tire coming off the bead. Lower pressure puts more tire on the ground for traction on loose surfaces and softens the ride.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x9, bolt pattern 6x5.5 (6x139.7)
- Offset -12mm, backspacing 4.57 in
- Center bore 106.25 mm
- Finish: Method Bronze
- Bead Grip Technology (per Method)
Fitment: Method publishes this wheel as 17x9, 6x5.5, -12mm offset, 4.57in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore is the one shown in the product title. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. Factory offset on the Ranger Raptor is +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$409.00
The Method MR703 Bead Grip is a 17x9 six-lug wheel finished in Gloss Titanium, drilled 6x5.5 (6x139.7) with a -12mm offset and 4.57 in backspacing. Method publishes it as part number MR70379060812N in its MR703 Bead Grip line, which it describes as developed for off-road enthusiasts and overland trips.
Design. Method describes the MR703 as a 12-window wheel with dual debossed METHOD logos.
Bead Grip Technology. Method says Bead Grip lets you run tire pressures that used to call for beadlock wheels without the tire coming off the bead. Lower pressure off-road spreads the contact patch for better grip on loose surfaces and softens the ride.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x9, bolt pattern 6x5.5 (6x139.7)
- Offset -12mm, backspacing 4.57 in
- Center bore 106.25 mm
- Finish: Gloss Titanium
- Bead Grip Technology
- 12-window design with dual debossed METHOD logos
Fitment: Method publishes this wheel as 17x9, 6x5.5, -12mm offset, 4.57 in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 106.25 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory wheel offset on the Ranger Raptor is about +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$409.00
The Method MR703 Bead Grip is a 17x9 six-lug wheel finished in Matte Black, drilled 6x5.5 (6x139.7) with a -12mm offset and 4.57 in backspacing. Method publishes it as part number MR70379060512N in its MR703 Bead Grip line, which it describes as developed for off-road enthusiasts and overland trips.
Design. Method describes the MR703 as a 12-window wheel with dual debossed METHOD logos.
Bead Grip Technology. Method says Bead Grip lets you run tire pressures that used to call for beadlock wheels without the tire coming off the bead. Lower pressure off-road spreads the contact patch for better grip on loose surfaces and softens the ride.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x9, bolt pattern 6x5.5 (6x139.7)
- Offset -12mm, backspacing 4.57 in
- Center bore 106.25 mm
- Finish: Matte Black
- Bead Grip Technology
- 12-window design with dual debossed METHOD logos
Fitment: Method publishes this wheel as 17x9, 6x5.5, -12mm offset, 4.57 in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 106.25 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory wheel offset on the Ranger Raptor is about +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$409.00
The Method MR703 Bead Grip is a 17x8.5 six-lug wheel finished in Method Bronze, drilled 6x5.5 (6x139.7) with a +35mm offset and 6.2 in backspacing. Method publishes it as part number MR70378560935 in its MR703 Bead Grip line, which it describes as developed for off-road enthusiasts and overland trips.
Design. Method describes the MR703 as a 12-window wheel with dual debossed METHOD logos.
Bead Grip Technology. Method says Bead Grip lets you run tire pressures that used to call for beadlock wheels without the tire coming off the bead. Lower pressure off-road spreads the contact patch for better grip on loose surfaces and softens the ride.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x5.5 (6x139.7)
- Offset +35mm, backspacing 6.2 in
- Center bore 106.25 mm
- Finish: Method Bronze
- Bead Grip Technology
- 12-window design with dual debossed METHOD logos
Fitment: Method publishes this wheel as 17x8.5, 6x5.5, +35mm offset, 6.2 in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 106.25 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory wheel offset on the Ranger Raptor is about +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$409.00
The Method MR703 Bead Grip is a 17x8.5 six-lug wheel finished in Method Bronze, drilled 6x5.5 (6x139.7) with a 0mm offset and 4.8 in backspacing. Method publishes it as part number MR70378560900 in its MR703 Bead Grip line, which it describes as developed for off-road enthusiasts and overland trips.
Design. Method describes the MR703 as a 12-window wheel with dual debossed METHOD logos.
Bead Grip Technology. Method says Bead Grip lets you run tire pressures that used to call for beadlock wheels without the tire coming off the bead. Lower pressure off-road spreads the contact patch for better grip on loose surfaces and softens the ride.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x5.5 (6x139.7)
- Offset 0mm, backspacing 4.8 in
- Center bore 106.25 mm
- Finish: Method Bronze
- Bead Grip Technology
- 12-window design with dual debossed METHOD logos
Fitment: Method publishes this wheel as 17x8.5, 6x5.5, 0mm offset, 4.8 in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 106.25 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory wheel offset on the Ranger Raptor is about +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$409.00
The Method MR703 Bead Grip is a 17x8.5 six-lug wheel finished in Gloss Titanium, drilled 6x5.5 (6x139.7) with a +35mm offset and 6.2 in backspacing. Method publishes it as part number MR70378560835 in its MR703 Bead Grip line, which it describes as developed for off-road enthusiasts and overland trips.
Design. Method describes the MR703 as a 12-window wheel with dual debossed METHOD logos.
Bead Grip Technology. Method says Bead Grip lets you run tire pressures that used to call for beadlock wheels without the tire coming off the bead. Lower pressure off-road spreads the contact patch for better grip on loose surfaces and softens the ride.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x5.5 (6x139.7)
- Offset +35mm, backspacing 6.2 in
- Center bore 106.25 mm
- Finish: Gloss Titanium
- Bead Grip Technology
- 12-window design with dual debossed METHOD logos
Fitment: Method publishes this wheel as 17x8.5, 6x5.5, +35mm offset, 6.2 in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 106.25 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory wheel offset on the Ranger Raptor is about +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$409.00
The Method MR703 Bead Grip is a 17x8.5 six-lug wheel finished in Gloss Titanium, drilled 6x5.5 (6x139.7) with a 0mm offset and 4.8 in backspacing. Method publishes it as part number MR70378560800 in its MR703 Bead Grip line, which it describes as developed for off-road enthusiasts and overland trips.
Design. Method describes the MR703 as a 12-window wheel with dual debossed METHOD logos.
Bead Grip Technology. Method says Bead Grip lets you run tire pressures that used to call for beadlock wheels without the tire coming off the bead. Lower pressure off-road spreads the contact patch for better grip on loose surfaces and softens the ride.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x5.5 (6x139.7)
- Offset 0mm, backspacing 4.8 in
- Center bore 106.25 mm
- Finish: Gloss Titanium
- Bead Grip Technology
- 12-window design with dual debossed METHOD logos
Fitment: Method publishes this wheel as 17x8.5, 6x5.5, 0mm offset, 4.8 in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 106.25 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory wheel offset on the Ranger Raptor is about +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$409.00
The Method MR703 Bead Grip is a 17x8.5 six-lug wheel finished in Matte Black, drilled 6x5.5 (6x139.7) with a +35mm offset and 6.2 in backspacing. Method publishes it as part number MR70378560535 in its MR703 Bead Grip line, which it describes as developed for off-road enthusiasts and overland trips.
Design. Method describes the MR703 as a 12-window wheel with dual debossed METHOD logos.
Bead Grip Technology. Method says Bead Grip lets you run tire pressures that used to call for beadlock wheels without the tire coming off the bead. Lower pressure off-road spreads the contact patch for better grip on loose surfaces and softens the ride.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x5.5 (6x139.7)
- Offset +35mm, backspacing 6.2 in
- Center bore 106.25 mm
- Finish: Matte Black
- Bead Grip Technology
- 12-window design with dual debossed METHOD logos
Fitment: Method publishes this wheel as 17x8.5, 6x5.5, +35mm offset, 6.2 in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 106.25 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory wheel offset on the Ranger Raptor is about +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$409.00
The Method MR703 Bead Grip is a 17x8.5 six-lug wheel finished in Matte Black, drilled 6x5.5 (6x139.7) with a 0mm offset and 4.8 in backspacing. Method publishes it as part number MR70378560500 in its MR703 Bead Grip line, which it describes as developed for off-road enthusiasts and overland trips.
Design. Method describes the MR703 as a 12-window wheel with dual debossed METHOD logos.
Bead Grip Technology. Method says Bead Grip lets you run tire pressures that used to call for beadlock wheels without the tire coming off the bead. Lower pressure off-road spreads the contact patch for better grip on loose surfaces and softens the ride.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x5.5 (6x139.7)
- Offset 0mm, backspacing 4.8 in
- Center bore 106.25 mm
- Finish: Matte Black
- Bead Grip Technology
- 12-window design with dual debossed METHOD logos
Fitment: Method publishes this wheel as 17x8.5, 6x5.5, 0mm offset, 4.8 in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 106.25 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory wheel offset on the Ranger Raptor is about +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$429.00
The Method MR703 Bead Grip is a 17x8.5 six-lug wheel finished in Machined - Clear Coat, drilled 6x5.5 (6x139.7) with a +35mm offset and 6.2 in backspacing. Method publishes it as part number MR70378560335 in its MR703 Bead Grip line, which it describes as developed for off-road enthusiasts and overland trips.
Design. Method describes the MR703 as a 12-window wheel with dual debossed METHOD logos.
Bead Grip Technology. Method says Bead Grip lets you run tire pressures that used to call for beadlock wheels without the tire coming off the bead. Lower pressure off-road spreads the contact patch for better grip on loose surfaces and softens the ride.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x5.5 (6x139.7)
- Offset +35mm, backspacing 6.2 in
- Center bore 106.25 mm
- Finish: Machined - Clear Coat
- Bead Grip Technology
- 12-window design with dual debossed METHOD logos
Fitment: Method publishes this wheel as 17x8.5, 6x5.5, +35mm offset, 6.2 in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 106.25 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory wheel offset on the Ranger Raptor is about +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$429.00
The Method MR703 Bead Grip is a 17x8.5 six-lug wheel finished in Machined - Clear Coat, drilled 6x5.5 (6x139.7) with a 0mm offset and 4.8 in backspacing. Method publishes it as part number MR70378560300 in its MR703 Bead Grip line, which it describes as developed for off-road enthusiasts and overland trips.
Design. Method describes the MR703 as a 12-window wheel with dual debossed METHOD logos.
Bead Grip Technology. Method says Bead Grip lets you run tire pressures that used to call for beadlock wheels without the tire coming off the bead. Lower pressure off-road spreads the contact patch for better grip on loose surfaces and softens the ride.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x5.5 (6x139.7)
- Offset 0mm, backspacing 4.8 in
- Center bore 106.25 mm
- Finish: Machined - Clear Coat
- Bead Grip Technology
- 12-window design with dual debossed METHOD logos
Fitment: Method publishes this wheel as 17x8.5, 6x5.5, 0mm offset, 4.8 in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 106.25 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory wheel offset on the Ranger Raptor is about +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$409.00
The Method MR703 Bead Grip is a 17x8.5 six-lug wheel finished in Method Bronze, drilled 6x135 with a +25mm offset and 5.78 in backspacing. Method publishes it as part number MR70378516925 in its MR703 Bead Grip line, which it describes as developed for off-road enthusiasts and overland trips.
Design. Method describes the MR703 as a 12-window wheel with dual debossed METHOD logos.
Bead Grip Technology. Method says Bead Grip lets you run tire pressures that used to call for beadlock wheels without the tire coming off the bead. Lower pressure off-road spreads the contact patch for better grip on loose surfaces and softens the ride.
6x135 fit. The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 87 mm (nominal 87.1), so it centers on the Ford hub.
Wheel only. Lug nuts are not included, so plan on the correct M14x1.5 nuts for these trucks.
Features
- Size 17x8.5, bolt pattern 6x135
- Offset +25mm, backspacing 5.78 in
- Center bore 87 mm (nominal 87.1)
- Finish: Method Bronze
- Bead Grip Technology
- 12-window design with dual debossed METHOD logos
Fitment: Method publishes this wheel as 17x8.5, 6x135, +25mm offset, 5.78 in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; the center bore for this part number is 87 mm.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory wheel offset on these trucks is about +34 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$409.00
The Method MR703 Bead Grip is a 17x8.5 six-lug wheel finished in Method Bronze, drilled 6x135 with a 0mm offset and 4.8 in backspacing. Method publishes it as part number MR70378516900 in its MR703 Bead Grip line, which it describes as developed for off-road enthusiasts and overland trips.
Design. Method describes the MR703 as a 12-window wheel with dual debossed METHOD logos.
Bead Grip Technology. Method says Bead Grip lets you run tire pressures that used to call for beadlock wheels without the tire coming off the bead. Lower pressure off-road spreads the contact patch for better grip on loose surfaces and softens the ride.
6x135 fit. The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 87 mm (nominal 87.1), so it centers on the Ford hub.
Wheel only. Lug nuts are not included, so plan on the correct M14x1.5 nuts for these trucks.
Features
- Size 17x8.5, bolt pattern 6x135
- Offset 0mm, backspacing 4.8 in
- Center bore 87 mm (nominal 87.1)
- Finish: Method Bronze
- Bead Grip Technology
- 12-window design with dual debossed METHOD logos
Fitment: Method publishes this wheel as 17x8.5, 6x135, 0mm offset, 4.8 in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; the center bore for this part number is 87 mm.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory wheel offset on these trucks is about +34 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$409.00
The Method MR703 Bead Grip is a 17x8.5 six-lug wheel in matte black, drilled 6x135 with a +25mm offset and 5.78 in backspacing. Method publishes it as part number MR70378516525 in its MR703 Bead Grip line, which it describes as developed for off-road enthusiasts and overland trips.
Design. Method describes the MR703 as a 12-window wheel with dual debossed METHOD logos.
Bead Grip Technology. Method says Bead Grip lets you run tire pressures that used to call for beadlock wheels without the tire coming off the bead. Lower pressure off-road spreads the contact patch for better grip on loose surfaces and softens the ride.
6x135 fit. The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 87 mm (nominal 87.1), so it centers on the Ford hub.
Wheel only. Lug nuts are not included, so plan on the correct M14x1.5 nuts for these trucks.
Features
- Size 17x8.5, bolt pattern 6x135
- Offset +25mm, backspacing 5.78 in
- Center bore 87 mm (nominal 87.1)
- Finish: matte black
- Bead Grip Technology
- 12-window design with dual debossed METHOD logos
Fitment: Method publishes this wheel as 17x8.5, 6x135, +25mm offset, 5.78 in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; the center bore for this part number is 87 mm.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory wheel offset on these trucks is about +34 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$409.00
The Method MR703 is a 17x8.5 six-lug wheel in matte black, drilled 6x135 with a 0 mm offset and 4.8 in backspacing. Method publishes it as part number MR70378516500 in its Bead Grip line.
Bead Grip technology. Method developed the MR703 for off-road enthusiasts and overland trips. Its Bead Grip technology lets you run tire pressures that would normally call for a beadlock wheel without the tire coming off the bead. Method says lower pressure gives a bigger contact patch for traction on loose surfaces and a softer ride.
12-window design. Method describes the look as a 12 window design with dual debossed METHOD logos.
Hub-centric 6x135 fit. The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 87 mm (nominal 87.1), so it centers on the Ford hub.
Wheel only. Lug nuts are not included, so plan on the correct M14x1.5 nuts for these trucks.
Features
- Size 17x8.5, bolt pattern 6x135
- Offset 0 mm, backspacing 4.8 in
- Center bore 87 mm (nominal 87.1)
- Finish: matte black
- Bead Grip technology for low-pressure off-road driving
- 12 window design with dual debossed METHOD logos
Fitment: Method publishes this wheel as 17x8.5, 6x135, 0mm offset, 4.8in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; the center bore for this part number is 87 mm.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$389.00
The Method MR703 is a 16x8 six-lug wheel in gloss titanium, drilled 6x5.5 (6x139.7) with a 0 mm offset and 4.5 in backspacing. Method publishes it as part number MR70368060800 in its Bead Grip line.
Bead Grip technology. Method developed the MR703 for off-road enthusiasts and overland trips. Its Bead Grip technology lets you run tire pressures that would normally call for a beadlock wheel without the tire coming off the bead. Method says lower pressure gives a bigger contact patch for traction on loose surfaces and a softer ride.
12-window design. Method describes the look as a 12 window design with dual debossed METHOD logos.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 16x8, bolt pattern 6x5.5 (6x139.7)
- Offset 0 mm, backspacing 4.5 in
- Center bore 106.25 mm
- Finish: gloss titanium
- Bead Grip technology for low-pressure off-road driving
- 12 window design with dual debossed METHOD logos
Fitment: Method publishes this wheel as 16x8, 6x5.5, 0mm offset, 4.5in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 106.25 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$389.00
The Method MR703 is a 16x8 six-lug wheel in matte black, drilled 6x5.5 (6x139.7) with a 0 mm offset and 4.5 in backspacing. Method publishes it as part number MR70368060500 in its Bead Grip line.
Bead Grip technology. Method developed the MR703 for off-road enthusiasts and overland trips. Its Bead Grip technology lets you run tire pressures that would normally call for a beadlock wheel without the tire coming off the bead. Method says lower pressure gives a bigger contact patch for traction on loose surfaces and a softer ride.
12-window design. Method describes the look as a 12 window design with dual debossed METHOD logos.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 16x8, bolt pattern 6x5.5 (6x139.7)
- Offset 0 mm, backspacing 4.5 in
- Center bore 106.25 mm
- Finish: matte black
- Bead Grip technology for low-pressure off-road driving
- 12 window design with dual debossed METHOD logos
Fitment: Method publishes this wheel as 16x8, 6x5.5, 0mm offset, 4.5in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 106.25 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$439.00
The Method MR701 is an 18x9 six-lug wheel in Method Bronze, drilled 6x5.5 (6x139.7) with a +18 mm offset and 5.8 in backspacing. Method publishes it as part number MR70189060918 in its Bead Grip line.
Bead Grip technology. Method designed the MR701 for overland enthusiasts. Its Bead Grip technology lets you run tire pressures that would normally call for a beadlock wheel without the tire coming off the bead. Method says lower pressure gives a bigger contact patch for traction on loose surfaces and a softer ride.
Valve placement. Method placed the valve stem to give it extra protection in harsh riding conditions.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 18x9, bolt pattern 6x5.5 (6x139.7)
- Offset +18 mm, backspacing 5.8 in
- Center bore 106.25 mm
- Finish: Method Bronze
- Bead Grip technology for low-pressure off-road driving
- Valve stem placed for extra protection
Fitment: Method publishes this wheel as 18x9, 6x5.5, +18mm offset, 5.8in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 106.25 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$439.00
The Method MR701 is an 18x9 six-lug wheel in matte black, drilled 6x5.5 (6x139.7) with a +18 mm offset and 5.8 in backspacing. Method publishes it as part number MR70189060518 in its Bead Grip line.
Bead Grip technology. Method designed the MR701 for overland enthusiasts. Its Bead Grip technology lets you run tire pressures that would normally call for a beadlock wheel without the tire coming off the bead. Method says lower pressure gives a bigger contact patch for traction on loose surfaces and a softer ride.
Valve placement. Method placed the valve stem to give it extra protection in harsh riding conditions.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 18x9, bolt pattern 6x5.5 (6x139.7)
- Offset +18 mm, backspacing 5.8 in
- Center bore 106.25 mm
- Finish: matte black
- Bead Grip technology for low-pressure off-road driving
- Valve stem placed for extra protection
Fitment: Method publishes this wheel as 18x9, 6x5.5, +18mm offset, 5.8in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 106.25 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$409.00
The Method MR701 is a 17x9 six-lug wheel in Method Bronze, drilled 6x5.5 (6x139.7) with a -12 mm offset and 4.62 in backspacing. Method publishes it as part number MR70179060912N in its Bead Grip line.
Bead Grip technology. Method designed the MR701 for overland enthusiasts. Its Bead Grip technology lets you run tire pressures that would normally call for a beadlock wheel without the tire coming off the bead. Method says lower pressure gives a bigger contact patch for traction on loose surfaces and a softer ride.
Valve placement. Method placed the valve stem to give it extra protection in harsh riding conditions.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x9, bolt pattern 6x5.5 (6x139.7)
- Offset -12 mm, backspacing 4.62 in
- Center bore 106.25 mm
- Finish: Method Bronze
- Bead Grip technology for low-pressure off-road driving
- Valve stem placed for extra protection
Fitment: Method publishes this wheel as 17x9, 6x5.5, -12mm offset, 4.62in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 106.25 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$409.00
The Method MR701 is a 17x9 six-lug wheel in matte black, drilled 6x5.5 (6x139.7) with a -12 mm offset and 4.62 in backspacing. Method publishes it as part number MR70179060512N in its Bead Grip line.
Bead Grip technology. Method designed the MR701 for overland enthusiasts. Its Bead Grip technology lets you run tire pressures that would normally call for a beadlock wheel without the tire coming off the bead. Method says lower pressure gives a bigger contact patch for traction on loose surfaces and a softer ride.
Valve placement. Method placed the valve stem to give it extra protection in harsh riding conditions.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x9, bolt pattern 6x5.5 (6x139.7)
- Offset -12 mm, backspacing 4.62 in
- Center bore 106.25 mm
- Finish: matte black
- Bead Grip technology for low-pressure off-road driving
- Valve stem placed for extra protection
Fitment: Method publishes this wheel as 17x9, 6x5.5, -12mm offset, 4.62in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 106.25 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$409.00
The Method MR701 is a 17x8.5 six-lug wheel in Method Bronze, drilled 6x5.5 (6x139.7) with a 0 mm offset and 4.75 in backspacing. Method publishes it as part number MR70178560900 in its Bead Grip line.
Bead Grip technology. Method designed the MR701 for overland enthusiasts. Its Bead Grip technology lets you run tire pressures that would normally call for a beadlock wheel without the tire coming off the bead. Method says lower pressure gives a bigger contact patch for traction on loose surfaces and a softer ride.
Valve placement. Method placed the valve stem to give it extra protection in harsh riding conditions.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x5.5 (6x139.7)
- Offset 0 mm, backspacing 4.75 in
- Center bore 106.25 mm
- Finish: Method Bronze
- Bead Grip technology for low-pressure off-road driving
- Valve stem placed for extra protection
Fitment: Method publishes this wheel as 17x8.5, 6x5.5, 0mm offset, 4.75in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 106.25 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$409.00
The Method MR701 is a 17x8.5 six-lug wheel in matte black, drilled 6x5.5 (6x139.7) with a 0 mm offset and 4.75 in backspacing. Method publishes it as part number MR70178560500 in its Bead Grip line.
Bead Grip technology. Method designed the MR701 for overland enthusiasts. Its Bead Grip technology lets you run tire pressures that would normally call for a beadlock wheel without the tire coming off the bead. Method says lower pressure gives a bigger contact patch for traction on loose surfaces and a softer ride.
Valve placement. Method placed the valve stem to give it extra protection in harsh riding conditions.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x5.5 (6x139.7)
- Offset 0 mm, backspacing 4.75 in
- Center bore 106.25 mm
- Finish: matte black
- Bead Grip technology for low-pressure off-road driving
- Valve stem placed for extra protection
Fitment: Method publishes this wheel as 17x8.5, 6x5.5, 0mm offset, 4.75in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 106.25 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$429.00
The Method MR701 is a 17x8.5 six-lug wheel in a machined finish with clear coat, drilled 6x5.5 (6x139.7) with a 0 mm offset and 4.75 in backspacing. Method publishes it as part number MR70178560300 in its Bead Grip line.
Bead Grip technology. Method designed the MR701 for overland enthusiasts. Its Bead Grip technology lets you run tire pressures that would normally call for a beadlock wheel without the tire coming off the bead. Method says lower pressure gives a bigger contact patch for traction on loose surfaces and a softer ride.
Valve placement. Method placed the valve stem to give it extra protection in harsh riding conditions.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x5.5 (6x139.7)
- Offset 0 mm, backspacing 4.75 in
- Center bore 106.25 mm
- Finish: machined with clear coat
- Bead Grip technology for low-pressure off-road driving
- Valve stem placed for extra protection
Fitment: Method publishes this wheel as 17x8.5, 6x5.5, 0mm offset, 4.75in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 106.25 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$389.00
The Method MR701 is a 16x8 six-lug wheel in Method Bronze, drilled 6x5.5 (6x139.7) with a 0 mm offset and 4.5 in backspacing. Method publishes it as part number MR70168060900 in its Bead Grip line.
Bead Grip technology. Method designed the MR701 for overland enthusiasts. Its Bead Grip technology lets you run tire pressures that would normally call for a beadlock wheel without the tire coming off the bead. Method says lower pressure gives a bigger contact patch for traction on loose surfaces and a softer ride.
Valve placement. Method placed the valve stem to give it extra protection in harsh riding conditions.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 16x8, bolt pattern 6x5.5 (6x139.7)
- Offset 0 mm, backspacing 4.5 in
- Center bore 106.25 mm
- Finish: Method Bronze
- Bead Grip technology for low-pressure off-road driving
- Valve stem placed for extra protection
Fitment: Method publishes this wheel as 16x8, 6x5.5, 0mm offset, 4.5in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 106.25 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$389.00
The Method MR701 is a 16x8 six-lug wheel in matte black, drilled 6x5.5 (6x139.7) with a 0 mm offset and 4.5 in backspacing. Method publishes it as part number MR70168060500 in its Bead Grip line.
Bead Grip technology. Method designed the MR701 for overland enthusiasts. Its Bead Grip technology lets you run tire pressures that would normally call for a beadlock wheel without the tire coming off the bead. Method says lower pressure gives a bigger contact patch for traction on loose surfaces and a softer ride.
Valve placement. Method placed the valve stem to give it extra protection in harsh riding conditions.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 16x8, bolt pattern 6x5.5 (6x139.7)
- Offset 0 mm, backspacing 4.5 in
- Center bore 106.25 mm
- Finish: matte black
- Bead Grip technology for low-pressure off-road driving
- Valve stem placed for extra protection
Fitment: Method publishes this wheel as 16x8, 6x5.5, 0mm offset, 4.5in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 106.25 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$479.00
The Method MR605 NV is a 20x10 six-lug wheel in matte black, drilled 6x135 with a -24 mm offset and 4.55 in backspacing. Method publishes it as part number MR60521016524N. Method describes the MR605 NV as a 12-window wheel with debossed Method logos.
Design. The MR605 NV is a standard-series wheel. Its lip undercut imitates a true beadlock wheel, and the lip bolts are replaceable, with optional colors available from Method.
Hub-centric 6x135 fit. The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 87 mm (nominal 87.1), so it centers on the Ford hub.
Wheel only. Lug nuts are not included, so plan on the correct M14x1.5 nuts for these trucks.
Features
- Size 20x10, bolt pattern 6x135
- Offset -24 mm, backspacing 4.55 in
- Center bore 87 mm (nominal 87.1)
- Finish: matte black
- 12-window design with debossed Method logos
- Lip undercut that imitates a beadlock, with replaceable lip bolts
Fitment: Method publishes this wheel as 20x10, 6x135, -24mm offset, 4.55in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; the center bore for this part number is 87 mm.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$409.00
The Method MR323 is an 18x9 six-lug wheel in Gloss Method Bronze, drilled 6x5.5 (6x139.7) with a +12 mm offset and 5.44 in backspacing. Method publishes it as part number MR323890601512. Method describes the MR323 as a refresh of its 12-window design, a classic Method look, offered in gloss black and gloss Method bronze.
Design. The MR323 is a standard-series wheel that updates the iconic 12-window design with a fresh face.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 18x9, bolt pattern 6x5.5 (6x139.7)
- Offset +12 mm, backspacing 5.44 in
- Center bore 106.25 mm
- Finish: Gloss Method Bronze
- Refreshed 12-window design
- Method TOPO center cap (Method's page says it is included)
Fitment: Method publishes this wheel as 18x9, 6x5.5, +12mm offset, 5.44in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 106.25 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$409.00
The Method MR323 is an 18x9 six-lug wheel in gloss black, drilled 6x5.5 (6x139.7) with a +12 mm offset and 5.44 in backspacing. Method publishes it as part number MR323890601312. Method describes the MR323 as a refresh of its 12-window design, a classic Method look, offered in gloss black and gloss Method bronze.
Design. The MR323 is a standard-series wheel that updates the iconic 12-window design with a fresh face.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 18x9, bolt pattern 6x5.5 (6x139.7)
- Offset +12 mm, backspacing 5.44 in
- Center bore 106.25 mm
- Finish: gloss black
- Refreshed 12-window design
- Method TOPO center cap (Method's page says it is included)
Fitment: Method publishes this wheel as 18x9, 6x5.5, +12mm offset, 5.44in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 106.25 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$379.00
The Method MR323 is a 17x8.5 six-lug wheel in Gloss Method Bronze, drilled 6x5.5 (6x139.7) with a 0 mm offset and 4.72 in backspacing. Method publishes it as part number MR323785601500. Method describes the MR323 as a refresh of its 12-window design, a classic Method look, offered in gloss black and gloss Method bronze.
Design. The MR323 is a standard-series wheel that updates the iconic 12-window design with a fresh face.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x5.5 (6x139.7)
- Offset 0 mm, backspacing 4.72 in
- Center bore 106.25 mm
- Finish: Gloss Method Bronze
- Refreshed 12-window design
- Method TOPO center cap (Method's page says it is included)
Fitment: Method publishes this wheel as 17x8.5, 6x5.5, 0mm offset, 4.72in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 106.25 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$379.00
The Method MR323 is a 17x8.5 six-lug wheel in gloss black, drilled 6x5.5 (6x139.7) with a +25 mm offset and 5.7 in backspacing. Method publishes it as part number MR323785601325. Method describes the MR323 as a refresh of its 12-window design, a classic Method look, offered in gloss black and gloss Method bronze.
Design. The MR323 is a standard-series wheel that updates the iconic 12-window design with a fresh face.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x5.5 (6x139.7)
- Offset +25 mm, backspacing 5.7 in
- Center bore 106.25 mm
- Finish: gloss black
- Refreshed 12-window design
- Method TOPO center cap (Method's page says it is included)
Fitment: Method publishes this wheel as 17x8.5, 6x5.5, +25mm offset, 5.7in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 106.25 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$379.00
The Method MR323 is a 17x8.5 six-lug wheel in gloss black, drilled 6x5.5 (6x139.7) with a 0 mm offset and 4.72 in backspacing. Method publishes it as part number MR323785601300. Method describes the MR323 as a refresh of its 12-window design, a classic Method look, offered in gloss black and gloss Method bronze.
Design. The MR323 is a standard-series wheel that updates the iconic 12-window design with a fresh face.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x5.5 (6x139.7)
- Offset 0 mm, backspacing 4.72 in
- Center bore 106.25 mm
- Finish: gloss black
- Refreshed 12-window design
- Method TOPO center cap (Method's page says it is included)
Fitment: Method publishes this wheel as 17x8.5, 6x5.5, 0mm offset, 4.72in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 106.25 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$379.00
The Method MR323 is a 17x8.5 six-lug wheel in Gloss Method Bronze, drilled 6x135 with a 0 mm offset and 4.72 in backspacing. Method publishes it as part number MR323785161500. Method describes the MR323 as a refresh of its 12-window design, a classic Method look, offered in gloss black and gloss Method bronze.
Design. The MR323 is a standard-series wheel that updates the iconic 12-window design with a fresh face.
Hub-centric 6x135 fit. The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 87 mm (nominal 87.1), so it centers on the Ford hub.
Wheel only. Lug nuts are not included, so plan on the correct M14x1.5 nuts for these trucks.
Features
- Size 17x8.5, bolt pattern 6x135
- Offset 0 mm, backspacing 4.72 in
- Center bore 87 mm (nominal 87.1)
- Finish: Gloss Method Bronze
- Refreshed 12-window design
- Method TOPO center cap (Method's page says it is included)
Fitment: Method publishes this wheel as 17x8.5, 6x135, 0mm offset, 4.72in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; the center bore for this part number is 87 mm.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$409.00
The Method MR321 is an 18x9 six-lug wheel in gloss black, drilled 6x5.5 (6x139.7) with a +18 mm offset and 5.68 in backspacing. Method publishes it as part number MR321890601318. Method describes the MR321 as a window and spoke design built to stand out, offered in gloss black and machined finishes.
Design. The MR321 is a standard-series wheel with a unique window and spoke layout, aimed at off-road owners who want distinctive styling.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 18x9, bolt pattern 6x5.5 (6x139.7)
- Offset +18 mm, backspacing 5.68 in
- Center bore 106.25 mm
- Finish: gloss black
- Window and spoke design
- Method TOPO center cap (Method's page says it is included)
Fitment: Method publishes this wheel as 18x9, 6x5.5, +18mm offset, 5.68in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 106.25 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$399.00
The Method MR321 is a 17x8.5 six-lug wheel in a machined finish with clear coat, drilled 6x5.5 (6x139.7) with a 0 mm offset and 4.72 in backspacing. Method publishes it as part number MR32178560300. Method describes the MR321 as a window and spoke design built to stand out, offered in gloss black and machined finishes.
Design. The MR321 is a standard-series wheel with a unique window and spoke layout, aimed at off-road owners who want distinctive styling.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x5.5 (6x139.7)
- Offset 0 mm, backspacing 4.72 in
- Center bore 106.25 mm
- Finish: machined with clear coat
- Window and spoke design
- Method TOPO center cap (Method's page says it is included)
Fitment: Method publishes this wheel as 17x8.5, 6x5.5, 0mm offset, 4.72in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 106.25 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$379.00
The Method MR321 is a 17x8.5 six-lug wheel in gloss black, drilled 6x5.5 (6x139.7) with a 0 mm offset and 4.72 in backspacing. Method publishes it as part number MR321785601300. Method describes the MR321 as a window and spoke design built to stand out, offered in gloss black and machined finishes.
Design. The MR321 is a standard-series wheel with a unique window and spoke layout, aimed at off-road owners who want distinctive styling.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x5.5 (6x139.7)
- Offset 0 mm, backspacing 4.72 in
- Center bore 106.25 mm
- Finish: gloss black
- Window and spoke design
- Method TOPO center cap (Method's page says it is included)
Fitment: Method publishes this wheel as 17x8.5, 6x5.5, 0mm offset, 4.72in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 106.25 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$399.00
The Method MR321 is a 17x8.5 six-lug wheel in a machined finish with clear coat, drilled 6x135 with a 0 mm offset and 4.72 in backspacing. Method publishes it as part number MR32178516300. Method describes the MR321 as a window and spoke design built to stand out, offered in gloss black and machined finishes.
Design. The MR321 is a standard-series wheel with a unique window and spoke layout, aimed at off-road owners who want distinctive styling.
Hub-centric 6x135 fit. The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 87 mm (nominal 87.1), so it centers on the Ford hub.
Wheel only. Lug nuts are not included, so plan on the correct M14x1.5 nuts for these trucks.
Features
- Size 17x8.5, bolt pattern 6x135
- Offset 0 mm, backspacing 4.72 in
- Center bore 87 mm (nominal 87.1)
- Finish: machined with clear coat
- Window and spoke design
- Method TOPO center cap (Method's page says it is included)
Fitment: Method publishes this wheel as 17x8.5, 6x135, 0mm offset, 4.72in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; the center bore for this part number is 87 mm.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$409.00
The Method MR318 is an 18x9 six-lug wheel in gloss black, drilled 6x5.5 (6x139.7) with a +18 mm offset and 5.66 in backspacing. Method publishes it as part number MR318890601318. Method's page says the MR318 takes its design cues from the company's 412 UTV Bead Grip series wheel, bringing that look to the light truck market with clean lines.
Design. Taking cues from Method's 412 UTV Bead Grip wheel, the MR318 uses clean lines to make a truck stand out, and Method's page pairs the design with its TOPO center cap.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 18x9, bolt pattern 6x5.5 (6x139.7)
- Offset +18 mm, backspacing 5.66 in
- Center bore 106.25 mm
- Finish: gloss black
- Clean-lined design drawn from Method's 412 Bead Grip wheel
Fitment: Method publishes this wheel as 18x9, 6x5.5, +18mm offset, 5.66in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 106.25 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$409.00
The Method MR318 is an 18x9 six-lug wheel in gloss black, drilled 6x5.5 (6x139.7) with a 0 mm offset and 4.95 in backspacing. Method publishes it as part number MR318890601300. Method's page says the MR318 takes its design cues from the company's 412 UTV Bead Grip series wheel, bringing that look to the light truck market with clean lines.
Design. Taking cues from Method's 412 UTV Bead Grip wheel, the MR318 uses clean lines to make a truck stand out, and Method's page pairs the design with its TOPO center cap.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 18x9, bolt pattern 6x5.5 (6x139.7)
- Offset 0 mm, backspacing 4.95 in
- Center bore 106.25 mm
- Finish: gloss black
- Clean-lined design drawn from Method's 412 Bead Grip wheel
Fitment: Method publishes this wheel as 18x9, 6x5.5, 0mm offset, 4.95in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore for this part number is 106.25 mm. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.