Welcome to RaptorsOnly.com
-
Brands
Shop by brand
- 3D MAXpider
- Access
- Addictive Desert Designs
- Advan
- AEM Induction
- aFe
- Air Lift
- Airaid
- Alcon
- AlphaRex
- AMP Research
- AMS
- Anderson Composites
- ANZO
- ARB
- Atturo Tire
- AutoMeter
- AVS
- AWE Tuning
- BackRack
- Baer Brakes
- Baja Designs
- BAK
- Banks Power
- BBK
- BBS
- BD Diesel
- Belltech
- Bestop
- BFGoodrich
- BMC
- Body Armor 4x4
- Borla
- Brembo
- Brembo OE
- Bully Dog
- Bushwacker
- Camburg
- Clevite
- COBB
- Cometic Gasket
- COMP Cams
- CORSA Performance
- Covercraft
- CSF
- DBA
- DeatschWerks
- DFC
- Diode Dynamics
- DS18
- DV8 Offroad
- Eaton
- EBC
- Eibach
- Enkei
- Extang
- Fabtech
- Fel-Pro
- fifteen52
- Firestone
- Flowmaster
- Ford Racing
- Forgestar
- FORM Lighting
- FOX
- Garrett
- Gates
- GEN-Y Hitch
- Go Fast Bits
- Go Rhino
- Gram Lights
- Granatelli Motor Sports
- GSC Power Division
- Hawk Performance
- Hella
- Hellwig
- Hotchkis
- Husky Liners
- ICON
- Injen
- J&L
- JBA
- JLT
- K&N Engineering
- KC HiLiTES
- King Engine Bearings
- King Shocks
- Kleinn Air Horns
- Kooks Headers
- KYB
- LIQUI MOLY
- LUND
- Magnaflow
- Mahle OE
- Maxtrac
- Mayhem
- MBRP
- McGard
- Method Wheels
- MGP
- Michelin
- Mickey Thompson
- Mishimoto
- Moog
- Motul
- MTX Wheels
- N-Fab
- Nacho Offroad Technology
- NGK
- Nitrous Express
- Odyssey Battery
- ORACLE Lighting
- PowerStop
- Putco
- QA1
- Raceline
- Radium Engineering
- Rally Armor
- Rampage
- Raxiom
- Retrax
- Rhino-Rack
- Ridetech
- Rigid Industries
- Rival 4x4
- RockJock
- Roll-N-Lock
- Roush
- Royal Purple
- SCT Performance
- Skyjacker
- Snow Performance
- SPC Performance
- SPOD
- Stainless Works
- Superlift
- Superpro
- Timbren
- Torque Solution
- TOYO
- Truxedo
- Tuff Country
- Turbosmart
- UMI Performance
- Undercover
- Volant
- Vossen
- Wagner Tuning
- WeatherTech
- Weld
- Westin
- Whiteline
- Wilwood
- Yokohama Tire
- Yukon Gear & Axle
- Zone Offroad
No brands found. Try another name or initial.
156 brands
View all brands -
F-150 Raptor
- F-150 Raptor
-
1st Gen (2010-2014)
-
2nd Gen (2017-2020)
-
3rd Gen (2021-Present)
-
Raptor R (2023-Present)
-
Bronco Raptor
- Bronco Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
-
Ranger Raptor
- Ranger Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
Your cart
You'll love this too
Discount invalid. Please make sure the discount details are correct.
Discount code is already applied.
Discount applied!
Subheading
Product comparison
Describe you product comparison grid
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
Find wheels and tires that fit your Raptor
Pick your truck and we'll narrow the catalogue to the wheels drilled for your bolt pattern and the tire sizes that fit your rims.
Shopping for
- Bolt pattern
- Hub bore
- Factory tire
365 products
365 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$640.00
$640.00
$675.00
$675.00
$675.00
$605.00
$675.00
$605.00
$605.00
$324.99
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2023 | Ford | F-150 | King Ranch |
| 2015-2023 | Ford | F-150 | Lariat |
| 2016-2023 | Ford | F-150 | Limited |
| 2015-2023 | Ford | F-150 | Platinum |
| 2018-2023 | Ford | F-150 | Police Responder |
| 2017-2023 | Ford | F-150 | Raptor |
| 2016-2023 | Ford | F-150 | SSV |
| 2021-2023 | Ford | F-150 | Tremor |
| 2015-2023 | Ford | F-150 | XL |
| 2015-2023 | Ford | F-150 | XLT |
$274.50
$247.50
$463.24
The Mickey Thompson Classic III is a cast aluminum wheel with the Classic 8-hole design, in a polished finish, sized 17x12, with a 6x5.5 (6x139.7) bolt pattern.
The classic eight-hole look. Mickey Thompson publishes this wheel as 17 x 12 with 4.25 in backspacing and a -58 mm offset. The maker's part number is 277008.
Built for trucks. It uses a 6x5.5 bolt pattern and a 4.26 in (108.2 mm) center bore, which is larger than the Ranger Raptor's 93.1 mm hub, so use hub-centric rings to center it on the hub. Bore per the maker's part page.
Fit notes. The Ranger Raptor's factory wheel is also 17 inch; still check brake and fender clearance for this width and offset. Wheels are not listed with lug nuts by the maker; the Ranger Raptor uses M12x1.5 studs, so confirm the nut seat type with your lug nut supplier.
Features
- Classic 8-hole design
- Polished hand holes to match the finish
- Debossed M/T logo
- Cast aluminum construction (per the maker)
- Net weight 25.08 lb, as listed by the maker
- 6x5.5 (6x139.7) bolt pattern
Fitment: Mickey Thompson publishes this wheel as 17x12, 6x5.5, -58 mm offset, 4.25 in backspacing; it does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor only, decided by bolt pattern (6x139.7) and center bore (108.2 mm, at or above the 93.1 mm hub) against Ford's Raptor hub specs; bore per Mickey Thompson's part page. Fitment is not claimed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use a 6x135 pattern.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$306.25
The Mickey Thompson Canyon is a cast aluminum truck and SUV wheel that pairs a vintage, Medallion-inspired look with modern engineering. This one is the Polished finish, sized 15x12, with a 6x5.5 (6x139.7) bolt pattern.
Retro design, modern build. Mickey Thompson publishes this wheel as 15 x 12 with 3.63 in backspacing and a -73 mm offset. The maker's part number is 274624.
Built for trucks. It uses a 6x5.5 bolt pattern and a 4.26 in (108.2 mm) center bore, which is larger than the Ranger Raptor's 93.1 mm hub, so use hub-centric rings to center it on the hub. Bore per the maker's part page.
Fit notes. This is a 15 inch wheel and the Ranger Raptor's factory wheel is 17 inch, so check brake clearance before ordering. Wheels are not listed with lug nuts by the maker; the Ranger Raptor uses M12x1.5 studs, so confirm the nut seat type with your lug nut supplier.
Features
- Vintage Medallion-inspired design with a classic 5-hole slot
- 2-step lip for an aggressive, updated look
- Polished finish
- Cast aluminum construction (per the maker)
- Net weight 20.68 lb, as listed by the maker
- 6x5.5 (6x139.7) bolt pattern
Fitment: Mickey Thompson publishes this wheel as 15x12, 6x5.5, -73 mm offset, 3.63 in backspacing; it does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor only, decided by bolt pattern (6x139.7) and center bore (108.2 mm, at or above the 93.1 mm hub) against Ford's Raptor hub specs; bore per Mickey Thompson's part page. Fitment is not claimed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use a 6x135 pattern.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$311.43
The Mickey Thompson Classic III is a cast aluminum wheel with the Classic 8-hole design, in a satin black finish, sized 17x9, with a 6x5.5 (6x139.7) bolt pattern.
The classic eight-hole look. Mickey Thompson publishes this wheel as 17 x 9 with 4.5 in backspacing and a -12 mm offset. The maker's part number is 250448.
Built for trucks. It uses a 6x5.5 bolt pattern and a 4.18 in (106.2 mm) center bore, which is larger than the Ranger Raptor's 93.1 mm hub, so use hub-centric rings to center it on the hub. Bore per the maker's part page.
Fit notes. The Ranger Raptor's factory wheel is also 17 inch; still check brake and fender clearance for this width and offset. Wheels are not listed with lug nuts by the maker; the Ranger Raptor uses M12x1.5 studs, so confirm the nut seat type with your lug nut supplier.
Features
- Classic 8-hole design
- Satin Black finish (the maker also offers a Polished version)
- Debossed M/T logo
- Cast aluminum construction (per the maker)
- Net weight 28.9 lb, as listed by the maker
- 6x5.5 (6x139.7) bolt pattern
Fitment: Mickey Thompson publishes this wheel as 17x9, 6x5.5, -12 mm offset, 4.5 in backspacing; it does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor only, decided by bolt pattern (6x139.7) and center bore (106.2 mm, at or above the 93.1 mm hub) against Ford's Raptor hub specs; bore per Mickey Thompson's part page. Fitment is not claimed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use a 6x135 pattern.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$332.96
The Mickey Thompson Classic III is a cast aluminum wheel with the Classic 8-hole design, in a polished finish, sized 17x9, with a 6x5.5 (6x139.7) bolt pattern.
The classic eight-hole look. Mickey Thompson publishes this wheel as 17 x 9 with 4.5 in backspacing and a -12 mm offset. The maker's part number is 250290.
Built for trucks. It uses a 6x5.5 bolt pattern and a 4.18 in (106.2 mm) center bore, which is larger than the Ranger Raptor's 93.1 mm hub, so use hub-centric rings to center it on the hub. Bore per the maker's part page.
Fit notes. The Ranger Raptor's factory wheel is also 17 inch; still check brake and fender clearance for this width and offset. Wheels are not listed with lug nuts by the maker; the Ranger Raptor uses M12x1.5 studs, so confirm the nut seat type with your lug nut supplier.
Features
- Classic 8-hole design
- Polished hand holes to match the finish
- Debossed M/T logo
- Cast aluminum construction (per the maker)
- Net weight 28.6 lb, as listed by the maker
- 6x5.5 (6x139.7) bolt pattern
Fitment: Mickey Thompson publishes this wheel as 17x9, 6x5.5, -12 mm offset, 4.5 in backspacing; it does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor only, decided by bolt pattern (6x139.7) and center bore (106.2 mm, at or above the 93.1 mm hub) against Ford's Raptor hub specs; bore per Mickey Thompson's part page. Fitment is not claimed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use a 6x135 pattern.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$314.86
The Mickey Thompson Classic III is a cast aluminum wheel with the Classic 8-hole design, in a polished finish, sized 15x12, with a 6x5.5 (6x139.7) bolt pattern.
The classic eight-hole look. Mickey Thompson publishes this wheel as 15 x 12 with 3.625 in backspacing and a -73 mm offset. The maker's part number is 250333.
Built for trucks. It uses a 6x5.5 bolt pattern and a 4.18 in (106.2 mm) center bore, which is larger than the Ranger Raptor's 93.1 mm hub, so use hub-centric rings to center it on the hub. Bore per the maker's part page.
Fit notes. This is a 15 inch wheel and the Ranger Raptor's factory wheel is 17 inch, so check brake clearance before ordering. Wheels are not listed with lug nuts by the maker; the Ranger Raptor uses M12x1.5 studs, so confirm the nut seat type with your lug nut supplier.
Features
- Classic 8-hole design
- Polished hand holes to match the finish
- Debossed M/T logo
- Cast aluminum construction (per the maker)
- Net weight 23.85 lb, as listed by the maker
- 6x5.5 (6x139.7) bolt pattern
Fitment: Mickey Thompson publishes this wheel as 15x12, 6x5.5, -73 mm offset, 3.625 in backspacing; it does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor only, decided by bolt pattern (6x139.7) and center bore (106.2 mm, at or above the 93.1 mm hub) against Ford's Raptor hub specs; bore per Mickey Thompson's part page. Fitment is not claimed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use a 6x135 pattern.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$286.77
The Mickey Thompson Classic III is a cast aluminum wheel with the Classic 8-hole design, in a polished finish, sized 15x10, with a 6x5.5 (6x139.7) bolt pattern.
The classic eight-hole look. Mickey Thompson publishes this wheel as 15 x 10 with 3.625 in backspacing and a -45 mm offset. The maker's part number is 250331.
Built for trucks. It uses a 6x5.5 bolt pattern and a 4.18 in (106.2 mm) center bore, which is larger than the Ranger Raptor's 93.1 mm hub, so use hub-centric rings to center it on the hub. Bore per the maker's part page.
Fit notes. This is a 15 inch wheel and the Ranger Raptor's factory wheel is 17 inch, so check brake clearance before ordering. Wheels are not listed with lug nuts by the maker; the Ranger Raptor uses M12x1.5 studs, so confirm the nut seat type with your lug nut supplier.
Features
- Classic 8-hole design
- Polished hand holes to match the finish
- Debossed M/T logo
- Cast aluminum construction (per the maker)
- Net weight 22.35 lb, as listed by the maker
- 6x5.5 (6x139.7) bolt pattern
Fitment: Mickey Thompson publishes this wheel as 15x10, 6x5.5, -45 mm offset, 3.625 in backspacing; it does not name vehicles. It is listed for the 2024-2026 Ford Ranger Raptor only, decided by bolt pattern (6x139.7) and center bore (106.2 mm, at or above the 93.1 mm hub) against Ford's Raptor hub specs; bore per Mickey Thompson's part page. Fitment is not claimed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which use a 6x135 pattern.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$489.00
The Method MR709 HD is an 18x9 six-lug wheel in matte black, drilled 6x5.5 with a +12 mm offset and 5.5 in backspacing. It is a heavy-duty Bead Grip wheel. Method publishes it as part number MR70989060512H.
Heavy-duty Bead Grip. Method's patented Bead Grip Technology keeps the tire seated under extreme aired-down conditions, and Method states the 709 HD carries ultra heavy-duty load ratings across all applications. Method's page lists an optional Forged Impact Ring (sold separately) that bolts on with included 12-point hardware.
6x139.7 (6x5.5) fit for the Ranger Raptor. The 6x5.5 pattern is 6x139.7, the one Ford uses on the 2024-2026 Ranger Raptor. The 106.25 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so hub-centric rings sized from 106.25 mm down to 93.1 mm are needed to center the wheel on the hub.
Wheel only. Lug nuts are not included, so plan on the correct M12x1.5 nuts for the Ranger Raptor.
Features
- Size 18x9, bolt pattern 6x5.5
- Offset +12 mm, backspacing 5.5 in
- Center bore 106.25 mm
- Finish: matte black
- Method Bead Grip Technology to keep tires secure when aired down
- Heavy-duty (HD) build; Method states ultra heavy-duty load ratings across all applications
- Optional Forged Impact Ring, sold separately (per Method)
Guides & Manuals
Impact Ring Install GuideFitment: Method publishes this wheel as 18x9, 6x5.5, +12mm offset, 5.5in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm hub. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; the center bore for this part number is 106.25 mm.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
The Ranger Raptor factory wheel is about +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$509.00
The Method MR709 HD is an 18x9 six-lug wheel in machined, drilled 6x5.5 with a +12 mm offset and 5.5 in backspacing. It is a heavy-duty Bead Grip wheel. Method publishes it as part number MR70989060312H.
Heavy-duty Bead Grip. Method's patented Bead Grip Technology keeps the tire seated under extreme aired-down conditions, and Method states the 709 HD carries ultra heavy-duty load ratings across all applications. Method's page lists an optional Forged Impact Ring (sold separately) that bolts on with included 12-point hardware.
6x139.7 (6x5.5) fit for the Ranger Raptor. The 6x5.5 pattern is 6x139.7, the one Ford uses on the 2024-2026 Ranger Raptor. The 106.25 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so hub-centric rings sized from 106.25 mm down to 93.1 mm are needed to center the wheel on the hub.
Wheel only. Lug nuts are not included, so plan on the correct M12x1.5 nuts for the Ranger Raptor.
Features
- Size 18x9, bolt pattern 6x5.5
- Offset +12 mm, backspacing 5.5 in
- Center bore 106.25 mm
- Finish: machined
- Method Bead Grip Technology to keep tires secure when aired down
- Heavy-duty (HD) build; Method states ultra heavy-duty load ratings across all applications
- Optional Forged Impact Ring, sold separately (per Method)
Guides & Manuals
Impact Ring Install GuideFitment: Method publishes this wheel as 18x9, 6x5.5, +12mm offset, 5.5in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm hub. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; the center bore for this part number is 106.25 mm.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
The Ranger Raptor factory wheel is about +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$459.00
The Method MR709 HD is a 17x8.5 six-lug wheel in matte black, drilled 6x5.5 with a +25 mm offset and 5.8 in backspacing. It is a heavy-duty Bead Grip wheel. Method publishes it as part number MR70978560525H.
Heavy-duty Bead Grip. Method's patented Bead Grip Technology keeps the tire seated under extreme aired-down conditions, and Method states the 709 HD carries ultra heavy-duty load ratings across all applications. Method's page lists an optional Forged Impact Ring (sold separately) that bolts on with included 12-point hardware.
6x139.7 (6x5.5) fit for the Ranger Raptor. The 6x5.5 pattern is 6x139.7, the one Ford uses on the 2024-2026 Ranger Raptor. The 106.25 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so hub-centric rings sized from 106.25 mm down to 93.1 mm are needed to center the wheel on the hub.
Wheel only. Lug nuts are not included, so plan on the correct M12x1.5 nuts for the Ranger Raptor.
Features
- Size 17x8.5, bolt pattern 6x5.5
- Offset +25 mm, backspacing 5.8 in
- Center bore 106.25 mm
- Finish: matte black
- Method Bead Grip Technology to keep tires secure when aired down
- Heavy-duty (HD) build; Method states ultra heavy-duty load ratings across all applications
- Optional Forged Impact Ring, sold separately (per Method)
Guides & Manuals
Impact Ring Install GuideFitment: Method publishes this wheel as 17x8.5, 6x5.5, +25mm offset, 5.8in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm hub. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; the center bore for this part number is 106.25 mm.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
The Ranger Raptor factory wheel is about +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$459.00
The Method MR709 HD is a 17x8.5 six-lug wheel in matte black, drilled 6x5.5 with a 0 mm offset and 4.8 in backspacing. It is a heavy-duty Bead Grip wheel. Method publishes it as part number MR70978560500H.
Heavy-duty Bead Grip. Method's patented Bead Grip Technology keeps the tire seated under extreme aired-down conditions, and Method states the 709 HD carries ultra heavy-duty load ratings across all applications. Method's page lists an optional Forged Impact Ring (sold separately) that bolts on with included 12-point hardware.
6x139.7 (6x5.5) fit for the Ranger Raptor. The 6x5.5 pattern is 6x139.7, the one Ford uses on the 2024-2026 Ranger Raptor. The 106.25 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so hub-centric rings sized from 106.25 mm down to 93.1 mm are needed to center the wheel on the hub.
Wheel only. Lug nuts are not included, so plan on the correct M12x1.5 nuts for the Ranger Raptor.
Features
- Size 17x8.5, bolt pattern 6x5.5
- Offset 0 mm, backspacing 4.8 in
- Center bore 106.25 mm
- Finish: matte black
- Method Bead Grip Technology to keep tires secure when aired down
- Heavy-duty (HD) build; Method states ultra heavy-duty load ratings across all applications
- Optional Forged Impact Ring, sold separately (per Method)
Guides & Manuals
Impact Ring Install GuideFitment: Method publishes this wheel as 17x8.5, 6x5.5, 0mm offset, 4.8in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm hub. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; the center bore for this part number is 106.25 mm.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
The Ranger Raptor factory wheel is about +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$479.00
The Method MR709 HD is a 17x8.5 six-lug wheel in machined, drilled 6x5.5 with a +25 mm offset and 5.8 in backspacing. It is a heavy-duty Bead Grip wheel. Method publishes it as part number MR70978560325H.
Heavy-duty Bead Grip. Method's patented Bead Grip Technology keeps the tire seated under extreme aired-down conditions, and Method states the 709 HD carries ultra heavy-duty load ratings across all applications. Method's page lists an optional Forged Impact Ring (sold separately) that bolts on with included 12-point hardware.
6x139.7 (6x5.5) fit for the Ranger Raptor. The 6x5.5 pattern is 6x139.7, the one Ford uses on the 2024-2026 Ranger Raptor. The 106.25 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so hub-centric rings sized from 106.25 mm down to 93.1 mm are needed to center the wheel on the hub.
Wheel only. Lug nuts are not included, so plan on the correct M12x1.5 nuts for the Ranger Raptor.
Features
- Size 17x8.5, bolt pattern 6x5.5
- Offset +25 mm, backspacing 5.8 in
- Center bore 106.25 mm
- Finish: machined
- Method Bead Grip Technology to keep tires secure when aired down
- Heavy-duty (HD) build; Method states ultra heavy-duty load ratings across all applications
- Optional Forged Impact Ring, sold separately (per Method)
Guides & Manuals
Impact Ring Install GuideFitment: Method publishes this wheel as 17x8.5, 6x5.5, +25mm offset, 5.8in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm hub. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; the center bore for this part number is 106.25 mm.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
The Ranger Raptor factory wheel is about +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$479.00
The Method MR709 HD is a 17x8.5 six-lug wheel in machined, drilled 6x5.5 with a 0 mm offset and 4.8 in backspacing. It is a heavy-duty Bead Grip wheel. Method publishes it as part number MR70978560300H.
Heavy-duty Bead Grip. Method's patented Bead Grip Technology keeps the tire seated under extreme aired-down conditions, and Method states the 709 HD carries ultra heavy-duty load ratings across all applications. Method's page lists an optional Forged Impact Ring (sold separately) that bolts on with included 12-point hardware.
6x139.7 (6x5.5) fit for the Ranger Raptor. The 6x5.5 pattern is 6x139.7, the one Ford uses on the 2024-2026 Ranger Raptor. The 106.25 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so hub-centric rings sized from 106.25 mm down to 93.1 mm are needed to center the wheel on the hub.
Wheel only. Lug nuts are not included, so plan on the correct M12x1.5 nuts for the Ranger Raptor.
Features
- Size 17x8.5, bolt pattern 6x5.5
- Offset 0 mm, backspacing 4.8 in
- Center bore 106.25 mm
- Finish: machined
- Method Bead Grip Technology to keep tires secure when aired down
- Heavy-duty (HD) build; Method states ultra heavy-duty load ratings across all applications
- Optional Forged Impact Ring, sold separately (per Method)
Guides & Manuals
Impact Ring Install GuideFitment: Method publishes this wheel as 17x8.5, 6x5.5, 0mm offset, 4.8in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm hub. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; the center bore for this part number is 106.25 mm.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
The Ranger Raptor factory wheel is about +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$459.00
The Method MR709 HD is a 17x8.5 six-lug wheel in matte black, drilled 6x135 with a 0 mm offset and 4.8 in backspacing. It is a heavy-duty Bead Grip wheel. Method publishes it as part number MR70978516500H.
Heavy-duty Bead Grip. Method's patented Bead Grip Technology keeps the tire seated under extreme aired-down conditions, and Method states the 709 HD carries ultra heavy-duty load ratings across all applications. Method's page lists an optional Forged Impact Ring (sold separately) that bolts on with included 12-point hardware.
Hub-centric 6x135 fit. The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 87 mm (nominal 87.1), so it centers on the Ford hub.
Wheel only. Lug nuts are not included, so plan on the correct M14x1.5 nuts for these trucks.
Features
- Size 17x8.5, bolt pattern 6x135
- Offset 0 mm, backspacing 4.8 in
- Center bore 87 mm (nominal 87.1)
- Finish: matte black
- Method Bead Grip Technology to keep tires secure when aired down
- Heavy-duty (HD) build; Method states ultra heavy-duty load ratings across all applications
- Optional Forged Impact Ring, sold separately (per Method)
Guides & Manuals
Impact Ring Install GuideFitment: Method publishes this wheel as 17x8.5, 6x135, 0mm offset, 4.8in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; the center bore for this part number is 87 mm.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
The factory wheel on these trucks is about +34 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$479.00
The Method MR709 HD is a 17x8.5 six-lug wheel in machined, drilled 6x135 with a 0 mm offset and 4.8 in backspacing. It is a heavy-duty Bead Grip wheel. Method publishes it as part number MR70978516300H.
Heavy-duty Bead Grip. Method's patented Bead Grip Technology keeps the tire seated under extreme aired-down conditions, and Method states the 709 HD carries ultra heavy-duty load ratings across all applications. Method's page lists an optional Forged Impact Ring (sold separately) that bolts on with included 12-point hardware.
Hub-centric 6x135 fit. The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 87 mm (nominal 87.1), so it centers on the Ford hub.
Wheel only. Lug nuts are not included, so plan on the correct M14x1.5 nuts for these trucks.
Features
- Size 17x8.5, bolt pattern 6x135
- Offset 0 mm, backspacing 4.8 in
- Center bore 87 mm (nominal 87.1)
- Finish: machined
- Method Bead Grip Technology to keep tires secure when aired down
- Heavy-duty (HD) build; Method states ultra heavy-duty load ratings across all applications
- Optional Forged Impact Ring, sold separately (per Method)
Guides & Manuals
Impact Ring Install GuideFitment: Method publishes this wheel as 17x8.5, 6x135, 0mm offset, 4.8in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; the center bore for this part number is 87 mm.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
The factory wheel on these trucks is about +34 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$409.00
The Method MR708 is a 17x8.5 six-lug wheel in gloss titanium, drilled 6x5.5 with a +25 mm offset and 5.7 in backspacing. It is a six-spoke Bead Grip wheel with large chamfered edges and a six window design. Method publishes it as part number MR70878560825.
Bead Grip Technology. Method's patented Bead Grip grooves engage the tire bead on both bead seats for a stronger hold under side load, which lets you run lower tire pressures than a standard wheel. Method's description pairs the wheel with a METHOD Bead Grip center cap.
6x139.7 (6x5.5) fit for the Ranger Raptor. The 6x5.5 pattern is 6x139.7, the one Ford uses on the 2024-2026 Ranger Raptor. The 106.25 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so hub-centric rings sized from 106.25 mm down to 93.1 mm are needed to center the wheel on the hub.
Wheel only. Lug nuts are not included, so plan on the correct M12x1.5 nuts for the Ranger Raptor.
Features
- Size 17x8.5, bolt pattern 6x5.5
- Offset +25 mm, backspacing 5.7 in
- Center bore 106.25 mm
- Finish: gloss titanium
- Classic six-spoke design with large chamfered edges and a six window layout
- Method Bead Grip Technology with grooves on the inner and outer bead seat
- More aggressive safety hump profile to help hold the tire bead in the seat
- Method describes it as paired with a METHOD Bead Grip center cap
Fitment: Method publishes this wheel as 17x8.5, 6x5.5, +25mm offset, 5.7in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm hub. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; the center bore for this part number is 106.25 mm.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
The Ranger Raptor factory wheel is about +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$409.00
The Method MR708 is a 17x8.5 six-lug wheel in gloss titanium, drilled 6x5.5 with a 0 mm offset and 4.72 in backspacing. It is a six-spoke Bead Grip wheel with large chamfered edges and a six window design. Method publishes it as part number MR70878560800.
Bead Grip Technology. Method's patented Bead Grip grooves engage the tire bead on both bead seats for a stronger hold under side load, which lets you run lower tire pressures than a standard wheel. Method's description pairs the wheel with a METHOD Bead Grip center cap.
6x139.7 (6x5.5) fit for the Ranger Raptor. The 6x5.5 pattern is 6x139.7, the one Ford uses on the 2024-2026 Ranger Raptor. The 106.25 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so hub-centric rings sized from 106.25 mm down to 93.1 mm are needed to center the wheel on the hub.
Wheel only. Lug nuts are not included, so plan on the correct M12x1.5 nuts for the Ranger Raptor.
Features
- Size 17x8.5, bolt pattern 6x5.5
- Offset 0 mm, backspacing 4.72 in
- Center bore 106.25 mm
- Finish: gloss titanium
- Classic six-spoke design with large chamfered edges and a six window layout
- Method Bead Grip Technology with grooves on the inner and outer bead seat
- More aggressive safety hump profile to help hold the tire bead in the seat
- Method describes it as paired with a METHOD Bead Grip center cap
Fitment: Method publishes this wheel as 17x8.5, 6x5.5, 0mm offset, 4.72in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm hub. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; the center bore for this part number is 106.25 mm.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
The Ranger Raptor factory wheel is about +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$409.00
The Method MR708 is a 17x8.5 six-lug wheel in gloss black, drilled 6x5.5 with a 0 mm offset and 4.72 in backspacing. It is a six-spoke Bead Grip wheel with large chamfered edges and a six window design. Method publishes it as part number MR708785601300.
Bead Grip Technology. Method's patented Bead Grip grooves engage the tire bead on both bead seats for a stronger hold under side load, which lets you run lower tire pressures than a standard wheel. Method's description pairs the wheel with a METHOD Bead Grip center cap.
6x139.7 (6x5.5) fit for the Ranger Raptor. The 6x5.5 pattern is 6x139.7, the one Ford uses on the 2024-2026 Ranger Raptor. The 106.25 mm bore is larger than the Ranger Raptor's 93.1 mm hub, so hub-centric rings sized from 106.25 mm down to 93.1 mm are needed to center the wheel on the hub.
Wheel only. Lug nuts are not included, so plan on the correct M12x1.5 nuts for the Ranger Raptor.
Features
- Size 17x8.5, bolt pattern 6x5.5
- Offset 0 mm, backspacing 4.72 in
- Center bore 106.25 mm
- Finish: gloss black
- Classic six-spoke design with large chamfered edges and a six window layout
- Method Bead Grip Technology with grooves on the inner and outer bead seat
- More aggressive safety hump profile to help hold the tire bead in the seat
- Method describes it as paired with a METHOD Bead Grip center cap
Fitment: Method publishes this wheel as 17x8.5, 6x5.5, 0mm offset, 4.72in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm hub. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; the center bore for this part number is 106.25 mm.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
The Ranger Raptor factory wheel is about +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$439.00
The Method MR707 Bead Grip is an 18x9 six-lug wheel in matte black, drilled 6x5.5 (6x139.7) with a 0mm offset and 5 in backspacing. Method lists it as part number MR70789060500. Method describes the 707 as bringing the rally-inspired look of its 407 UTV Bead Grip wheel to trucks, SUVs and crossovers, with Method's exclusive Bead Grip Technology for tire security at lower pressures.
Bead Grip Technology. Method says grooves on both the inner and outer bead seat grip the tire bead, and a more aggressive safety hump steadies the bead in its seat. That lets you run lower tire pressures that used to call for beadlocks while staying street legal.
Construction and load rating. Method's 707 page describes solid A356 aluminum with T6 heat treatment and load ratings of 1,850 to 3,640 lb. That range is for the 707 line, not a figure for this exact size and offset.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 18x9, bolt pattern 6x5.5 (6x139.7)
- Offset 0mm, backspacing 5 in
- Center bore 106.25 mm
- Finish: matte black
- Bead Grip Technology (per Method)
- Load rating 1,850-3,640 lb for the 707 line (per Method)
Fitment: Method publishes this wheel as 18x9, 6x5.5, 0mm offset, 5in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore is the one shown in the product title. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. Factory offset on the Ranger Raptor is +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$366.00
The Method MR707 Bead Grip is a 17x8.5 six-lug wheel in Bahia Blue, drilled 6x5.5 (6x139.7) with a 0 mm offset and 4.72 in backspacing. The part number is MR70778560600.
Multi-spoke face, concave center. The 707 has a multi-spoked outer face around a solid concave center, with a debossed Method logo on the outer lip and a Method center cap.
Bead Grip technology. Method's patented Bead Grip technology engages the tire bead for more grip at low tire pressures, and an aggressive safety hump on the bead seats further helps keep the tire from de-beading. The reinforced inner lip comes from Method's racing line for added strength and durability.
Cast aluminum, one piece. The wheel is durable one-piece cast aluminum, with a lifetime structural warranty and a two year warranty on the Bahia Blue finish.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Load rating. The load rating is 2,650 lbs.
Wheel only. Lug nuts are not included with the wheel; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x5.5 (6x139.7)
- Offset 0 mm, backspacing 4.72 in
- Center bore 106.25 mm
- Finish: Bahia Blue
- Bead Grip technology with safety hump on the bead seats
- Reinforced inner lip from Method's racing line
- Load rating 2,650 lbs
Fitment: The wheel is 17x8.5, 6x5.5, 0mm offset, 4.72in backspacing and 106.25mm bore, and no vehicles are listed for it. It is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Factory offset on the Ranger Raptor is about +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$409.00
The Method MR707 Bead Grip is a 17x8.5 six-lug wheel in matte black, drilled 6x5.5 (6x139.7) with a +25mm offset and 5.7 in backspacing. Method lists it as part number MR70778560525. Method describes the 707 as bringing the rally-inspired look of its 407 UTV Bead Grip wheel to trucks, SUVs and crossovers, with Method's exclusive Bead Grip Technology for tire security at lower pressures.
Bead Grip Technology. Method says grooves on both the inner and outer bead seat grip the tire bead, and a more aggressive safety hump steadies the bead in its seat. That lets you run lower tire pressures that used to call for beadlocks while staying street legal.
Construction and load rating. Method's 707 page describes solid A356 aluminum with T6 heat treatment and load ratings of 1,850 to 3,640 lb. That range is for the 707 line, not a figure for this exact size and offset.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x5.5 (6x139.7)
- Offset +25mm, backspacing 5.7 in
- Center bore 106.25 mm
- Finish: matte black
- Bead Grip Technology (per Method)
- Load rating 1,850-3,640 lb for the 707 line (per Method)
Fitment: Method publishes this wheel as 17x8.5, 6x5.5, +25mm offset, 5.7in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs. Bore: 106.25 mm per the supplier's listing title; Method's own page does not publish bore. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. Factory offset on the Ranger Raptor is +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$409.00
The Method MR707 Bead Grip is a 17x8.5 six-lug wheel in matte black, drilled 6x5.5 (6x139.7) with a 0mm offset and 4.72 in backspacing. Method lists it as part number MR70778560500. Method describes the 707 as bringing the rally-inspired look of its 407 UTV Bead Grip wheel to trucks, SUVs and crossovers, with Method's exclusive Bead Grip Technology for tire security at lower pressures.
Bead Grip Technology. Method says grooves on both the inner and outer bead seat grip the tire bead, and a more aggressive safety hump steadies the bead in its seat. That lets you run lower tire pressures that used to call for beadlocks while staying street legal.
Construction and load rating. Method's 707 page describes solid A356 aluminum with T6 heat treatment and load ratings of 1,850 to 3,640 lb. That range is for the 707 line, not a figure for this exact size and offset.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x5.5 (6x139.7)
- Offset 0mm, backspacing 4.72 in
- Center bore 106.25 mm
- Finish: matte black
- Bead Grip Technology (per Method)
- Load rating 1,850-3,640 lb for the 707 line (per Method)
Fitment: Method publishes this wheel as 17x8.5, 6x5.5, 0mm offset, 4.72in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore is the one shown in the product title. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. Factory offset on the Ranger Raptor is +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$409.00
The Method MR707 Bead Grip is a 17x8.5 six-lug wheel in matte black, drilled 6x135 with a 0mm offset and 4.72 in backspacing. Method lists it as part number MR70778516500. Method describes the 707 as bringing the rally-inspired look of its 407 UTV Bead Grip wheel to trucks, SUVs and crossovers, with Method's exclusive Bead Grip Technology for tire security at lower pressures.
Bead Grip Technology. Method says grooves on both the inner and outer bead seat grip the tire bead, and a more aggressive safety hump steadies the bead in its seat. That lets you run lower tire pressures that used to call for beadlocks while staying street legal.
Construction and load rating. Method's 707 page describes solid A356 aluminum with T6 heat treatment and load ratings of 1,850 to 3,640 lb. That range is for the 707 line, not a figure for this exact size and offset.
Hub-centric 6x135 fit. The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 87 mm (nominal 87.1), so it centers on the Ford hub.
Wheel only. Lug nuts are not included, so plan on the correct M14x1.5 nuts for these trucks.
Features
- Size 17x8.5, bolt pattern 6x135
- Offset 0mm, backspacing 4.72 in
- Center bore 87 mm (nominal 87.1)
- Finish: matte black
- Bead Grip Technology (per Method)
- Load rating 1,850-3,640 lb for the 707 line (per Method)
Fitment: Method publishes this wheel as 17x8.5, 6x135, 0mm offset, 4.72in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore listed as 87 mm (nominal 87.1).
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. Factory offset is about +34 mm on the F-150 Raptor, Raptor R and Bronco Raptor.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$429.00
The Method MR705 Bead Grip is an 18x9 six-lug wheel in matte black, drilled 6x5.5 (6x139.7) with a +18 mm offset and 5.8 in backspacing. The part number is MR70589060518.
Split five-spoke design. Method describes the 705 Bead Grip as having a bold split 5-spoke, 10 windowed design, developed for the toughest trails, roughest deserts and overland adventures.
Bead Grip technology. Method says Bead Grip lets you deflate tires to pressures that used to require beadlock wheels so the tire does not debead. Running lower pressure off-road increases the tire's contact patch for better traction on loose surfaces and softens the ride.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Method does not list lug nuts with this wheel; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 18x9, bolt pattern 6x5.5 (6x139.7)
- Offset +18 mm, backspacing 5.8 in
- Center bore 106.25 mm
- Finish: matte black
- Bead Grip technology
- Split 5-spoke, 10 window design
Fitment: The 18x9 size, +18mm offset and 106.25mm bore are the specs listed for this part number. Backspacing is the figure Method lists for its 18x9 Bead Grip wheels at +18mm offset. It is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Factory offset on the Ranger Raptor is about +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$429.00
The Method MR705 Bead Grip is an 18x9 six-lug wheel in matte black, drilled 6x5.5 (6x139.7) with a 0 mm offset and 5 in backspacing. The part number is MR70589060500.
Split five-spoke design. Method describes the 705 Bead Grip as having a bold split 5-spoke, 10 windowed design, developed for the toughest trails, roughest deserts and overland adventures.
Bead Grip technology. Method says Bead Grip lets you deflate tires to pressures that used to require beadlock wheels so the tire does not debead. Running lower pressure off-road increases the tire's contact patch for better traction on loose surfaces and softens the ride.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Method does not list lug nuts with this wheel; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 18x9, bolt pattern 6x5.5 (6x139.7)
- Offset 0 mm, backspacing 5 in
- Center bore 106.25 mm
- Finish: matte black
- Bead Grip technology
- Split 5-spoke, 10 window design
Fitment: The 18x9 size, 0mm offset and 106.25mm bore are the specs listed for this part number. Backspacing is the figure Method lists for its 18x9 Bead Grip wheels at 0mm offset. It is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.
Factory offset on the Ranger Raptor is about +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$409.00
The Method MR705 Bead Grip is a 17x8.5 six-lug wheel in titanium, drilled 6x5.5 (6x139.7) with a 0mm offset and 4.75 in backspacing. Method lists it as part number MR70578560800. Method describes the 705 as a Bead Grip wheel with a bold split 5-spoke, 10-window design, developed for the toughest trails, roughest deserts and overland adventures.
Bead Grip Technology. Method says Bead Grip lets you run tire pressures that used to need a beadlock wheel without the tire coming off the bead. Lower pressure puts more tire on the ground for traction on loose surfaces and softens the ride.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x5.5 (6x139.7)
- Offset 0mm, backspacing 4.75 in
- Center bore 106.25 mm
- Finish: titanium
- Bead Grip Technology (per Method)
Fitment: Method publishes this wheel as 17x8.5, 6x5.5, 0mm offset, 4.75in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore is the one shown in the product title. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. Factory offset on the Ranger Raptor is +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$409.00
The Method MR705 Bead Grip is a 17x8.5 six-lug wheel in matte black, drilled 6x5.5 (6x139.7) with a +35mm offset and 6.2 in backspacing. Method lists it as part number MR70578560535. Method describes the 705 as a Bead Grip wheel with a bold split 5-spoke, 10-window design, developed for the toughest trails, roughest deserts and overland adventures.
Bead Grip Technology. Method says Bead Grip lets you run tire pressures that used to need a beadlock wheel without the tire coming off the bead. Lower pressure puts more tire on the ground for traction on loose surfaces and softens the ride.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x5.5 (6x139.7)
- Offset +35mm, backspacing 6.2 in
- Center bore 106.25 mm
- Finish: matte black
- Bead Grip Technology (per Method)
Fitment: Method publishes this wheel as 17x8.5, 6x5.5, +35mm offset, 6.2in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore is the one shown in the product title. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. Factory offset on the Ranger Raptor is +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$409.00
The Method MR705 Bead Grip is a 17x8.5 six-lug wheel in matte black, drilled 6x5.5 (6x139.7) with a 0mm offset and 4.75 in backspacing. Method lists it as part number MR70578560500. Method describes the 705 as a Bead Grip wheel with a bold split 5-spoke, 10-window design, developed for the toughest trails, roughest deserts and overland adventures.
Bead Grip Technology. Method says Bead Grip lets you run tire pressures that used to need a beadlock wheel without the tire coming off the bead. Lower pressure puts more tire on the ground for traction on loose surfaces and softens the ride.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x5.5 (6x139.7)
- Offset 0mm, backspacing 4.75 in
- Center bore 106.25 mm
- Finish: matte black
- Bead Grip Technology (per Method)
Fitment: Method publishes this wheel as 17x8.5, 6x5.5, 0mm offset, 4.75in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore is the one shown in the product title. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. Factory offset on the Ranger Raptor is +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$409.00
The Method MR704 Bead Grip is a 17x8.5 six-lug wheel in titanium, drilled 6x5.5 (6x139.7) with a 0mm offset and 4.75 in backspacing. Method lists it as part number MR70478560800. Method describes the 704 as a Bead Grip wheel with a timeless 12-spoke design, developed for off-road enthusiasts and built for rough trails, deserts and overland adventures.
Bead Grip Technology. Method says Bead Grip lets you run tire pressures that used to need a beadlock wheel without the tire coming off the bead. Lower pressure puts more tire on the ground for traction on loose surfaces and softens the ride.
6x139.7 fit for the Ranger Raptor. The Ranger Raptor uses a 6x139.7 bolt pattern. This wheel's bore is listed as 106.25 mm, larger than the Ranger Raptor's 93.1 mm hub, so it needs hub-centric rings to center on the truck.
Wheel only. Lug nuts are not included; the Ranger Raptor uses M12x1.5 nuts.
Features
- Size 17x8.5, bolt pattern 6x5.5 (6x139.7)
- Offset 0mm, backspacing 4.75 in
- Center bore 106.25 mm
- Finish: titanium
- Bead Grip Technology (per Method)
Fitment: Method publishes this wheel as 17x8.5, 6x5.5, 0mm offset, 4.75in backspacing and does not list vehicles; it is listed for the Ford Ranger Raptor, which uses a 6x139.7 bolt pattern and a 93.1 mm center bore (a larger bore is fine with hub rings). Fitment is decided by bolt pattern and center bore against Ford's Ranger Raptor hub specs; the center bore is the one shown in the product title. It is a 6x5.5 wheel, so it does not fit the 6x135 F-150 Raptor, F-150 Raptor R or Bronco Raptor.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. Factory offset on the Ranger Raptor is +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.