Welcome to RaptorsOnly.com
-
Brands
Shop by brand
- 3D MAXpider
- Access
- Addictive Desert Designs
- Advan
- AEM Induction
- aFe
- Air Lift
- Airaid
- Alcon
- AlphaRex
- AMP Research
- AMS
- Anderson Composites
- ANZO
- ARB
- Atturo Tire
- AutoMeter
- AVS
- AWE Tuning
- BackRack
- Baer Brakes
- Baja Designs
- BAK
- Banks Power
- BBK
- BBS
- BD Diesel
- Belltech
- Bestop
- BFGoodrich
- BMC
- Body Armor 4x4
- Borla
- Brembo
- Brembo OE
- Bully Dog
- Bushwacker
- Camburg
- Clevite
- COBB
- Cometic Gasket
- COMP Cams
- CORSA Performance
- Covercraft
- CSF
- DBA
- DeatschWerks
- DFC
- Diode Dynamics
- DS18
- DV8 Offroad
- Eaton
- EBC
- Eibach
- Enkei
- Extang
- Fabtech
- Fel-Pro
- fifteen52
- Firestone
- Flowmaster
- Ford Racing
- Forgestar
- FORM Lighting
- FOX
- Garrett
- Gates
- GEN-Y Hitch
- Go Fast Bits
- Go Rhino
- Gram Lights
- Granatelli Motor Sports
- GSC Power Division
- Hawk Performance
- Hella
- Hellwig
- Hotchkis
- Husky Liners
- ICON
- Injen
- J&L
- JBA
- JLT
- K&N Engineering
- KC HiLiTES
- King Engine Bearings
- King Shocks
- Kleinn Air Horns
- Kooks Headers
- KYB
- LIQUI MOLY
- LUND
- Magnaflow
- Mahle OE
- Maxtrac
- Mayhem
- MBRP
- McGard
- Method Wheels
- MGP
- Michelin
- Mickey Thompson
- Mishimoto
- Moog
- Motul
- MTX Wheels
- N-Fab
- Nacho Offroad Technology
- NGK
- Nitrous Express
- Odyssey Battery
- ORACLE Lighting
- PowerStop
- Putco
- QA1
- Raceline
- Radium Engineering
- Rally Armor
- Rampage
- Raxiom
- Retrax
- Rhino-Rack
- Ridetech
- Rigid Industries
- Rival 4x4
- RockJock
- Roll-N-Lock
- Roush
- Royal Purple
- SCT Performance
- Skyjacker
- Snow Performance
- SPC Performance
- SPOD
- Stainless Works
- Superlift
- Superpro
- Timbren
- Torque Solution
- TOYO
- Truxedo
- Tuff Country
- Turbosmart
- UMI Performance
- Undercover
- Volant
- Vossen
- Wagner Tuning
- WeatherTech
- Weld
- Westin
- Whiteline
- Wilwood
- Yokohama Tire
- Yukon Gear & Axle
- Zone Offroad
No brands found. Try another name or initial.
156 brands
View all brands -
F-150 Raptor
- F-150 Raptor
-
1st Gen (2010-2014)
-
2nd Gen (2017-2020)
-
3rd Gen (2021-Present)
-
Raptor R (2023-Present)
-
Bronco Raptor
- Bronco Raptor
-
Suspension
-
Lighting
-
Bumpers & Armor
-
Racks
-
Interior Accessories
-
Exterior Accessories
-
Performance
-
Wheels & Tires
-
Brakes
-
Drivetrain
-
Engine & Cooling
-
Ranger Raptor
- Ranger Raptor
-
Suspension
-
Lighting
-
Bumpers & Armor
-
Racks
-
Interior Accessories
-
Exterior Accessories
-
Performance
-
Wheels & Tires
-
Brakes
-
Drivetrain
-
Engine & Cooling
Your cart
Subheading
Product comparison
Describe you product comparison grid
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
198 products
198 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$215.50
$539.99
Protruding out significantly less than the factory tail lights, this low-profile design has a more streamlined appearance while also reducing risk of tail light damage. These flush tail lights feature a unique modular design and functional LED lighting elements including high-powered reverse lights, unique signature perimeter lighting, and an animated turn signal sequence. No more problems backing up at night and no longer do you need to install additional reversing lamps onto the back of your truck to get the brightness you desire. Thats because these LED reverse lights are basically a pair of LED light bars mounted into the tail light which will provide over 4,400 Lumens of rear-facing illumination! In addition of the attractive "signature style" LED lighting band and the high-output reverse light this design also features a "dynamic" turn signal effect. This "motion" or "sequential effect" is a fluid LED motion from the inside portion of the light to the outside potion of the light signifying the direction of the turn signal with a fluid animated LED sequence. The adapters provide a true plug-and-play option without any other wiring being needed for installation. The new modular design allows the light to be quickly disassembled for custom painting. The Reverse Light module can be easily removed from the black housing which can then be painted to match the body color of the vehicle to provide a more customized appearance which more seamlessly blends with the truck. These innovative LED tail lights were designed and engineered by ORACLE Lighting right here in the USA. This Patent-Pending tail light design provides many unique features and characteristics, providing an aesthetically pleasing product with a forward-thinking design language.
Installation Instructions- Flush mounted to avoid damage to the light
- Easy "Plug-&-Play" installation
- Modern Sleek Design and Styling
- High-powered LED reverse lights
- Signature perimeter lighting
- Sequential Turn Signals
- 2 Year Warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023 | Toyota | 4Runner | 40th Anniversary Edition |
| 2014-2024 | Toyota | 4Runner | Limited |
| 2020-2021 | Toyota | 4Runner | Nightshade |
| 2014-2024 | Toyota | 4Runner | SR5 |
| 2018-2024 | Toyota | 4Runner | SR5 Premium |
| 2014-2016,2021-2022 | Toyota | 4Runner | Trail |
| 2017-2024 | Toyota | 4Runner | TRD Off-Road |
| 2018-2023 | Toyota | 4Runner | TRD Off-Road Premium |
| 2015-2024 | Toyota | 4Runner | TRD Pro |
| 2022-2024 | Toyota | 4Runner | TRD Sport |
| 2020-2021 | Toyota | 4Runner | Venture |
$330.99
This new ORACLE Halo Kit features ORACLE SMD Halos that are resin injected resulting in an IP67 waterproof rating. These new SMD Halos are installed directly to the outside of the vehicle's headlight lens making installation easy even for a novice! The halo kit is 12V powered and can be wired to a controller, switch, or parking light wiring harness. Warranty lifetime period covers the LED and driver components. Hard part decay due to UV damage, oxidation, or environmental conditions are not covered under this stated period.
- Features: Turn your lights on and off, select from millions of color variations, control patterns, brightness, strobe function, and even control the lights with music
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2009-2012 | Dodge | Challenger | R/T |
| 2012 | Dodge | Challenger | R/T Classic |
| 2009-2011 | Dodge | Challenger | SE |
| 2008-2012 | Dodge | Challenger | SRT8 |
$169.00
The ORACLE 2007-2014 Toyota Tundra Curved 50" LED Light Bar Brackets allow you to mount a 50" Curved LED Light Bar to the roof of your vehicle. These brackets are designed to match the curvature of the ORACLE 50" 288W LED Light Bar and are made from high quality weather resistant steel. Installation is fast and simple. These brackets mount onto the drip sill, but fully protect your vehicle from the outside elements by using the included all-weather gaskets. All mounting hardware, weather gaskets and DIY Installation Instructions are included. Note: Some drilling is required. Vehicle Application / Fitment: - 2007 Toyota Tundra - 2008 Toyota Tundra - 2009 Toyota Tundra - 2010 Toyota Tundra - 2011 Toyota Tundra - 2012 Toyota Tundra - 2013 Toyota Tundra- 2014 Toyota Tundra Product Features: - Weight: 1 lb. 3.2 oz. - Width: 3.5" - Height: .125" - Length: 14.5" - Mounts to Upper Drip Sill - Mounting Hardware Included - Weather Resistant Coating - All Weather Mounting w/ Rubber Gaskets - Welded Steel Construction - Will Fit All 2007-2014 Toyota Tundra Models Package Includes: - 2 x 2007-2014 Toyota Tundra ORACLE Curved 50" LED Light Bar Brackets - Mounting Hardware - All Weather-Gaskets - Installation Instructions
- Made from high quality weather resistant steel
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2014 | Toyota | Tundra | 1794 Edition |
| 2007-2013 | Toyota | Tundra | Base |
| 2007-2014 | Toyota | Tundra | Limited |
| 2010-2014 | Toyota | Tundra | Platinum |
| 2014 | Toyota | Tundra | SR |
| 2007-2011,2014 | Toyota | Tundra | SR5 |
$137.99
ORACLE Lighting Sealed Beam Headlights are a great way to add Modern Styling to your Classic Car or Truck! SMD Halos are Pre-Installed into the Glass Headlight Housings and ready to install, just connect your wires to a 12V power source. These lights work great with any of the wide selection of ORACLE Lighting Switches and Controllers for easier installation. We also recommend the ORACLE H4 LED Headlight Bulbs as a great addition to these Headlights for addition light output and visibility without blinding other drivers.
- Sold Individually
$391.00
ORACLE Part 3982-332 Fits all 2016-2018 Chevy Camaro Models with OEM DRLs. The new ORACLE Lighting Dynamic ColorSHIFT(tm) Halo Kit is the latest advancement in our expansive lighting modifications. The Dynamic features allow the user to run multiple moving color patterns through the Halo ring, creating a vivid eye-catching lighting effect. Conveniently controlled through a free smartphone App, the system features over 200 pre-programmed moving patterns as well as static color control and white mode for normal street driving. In addition to the pre-programmed features the user can also create custom designs through pixel editing in the app. Installation: New user-friendly design is a simple plug and play design making wiring easy for even a novice. Simply connect the ring terminals to the + and - battery terminals then control your lights from the smartphone app.
- Features over 200 pre-programmed moving patterns as well as static color control and white mode for normal street driving
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2018 | Chevrolet | Camaro | LS |
| 2016-2018 | Chevrolet | Camaro | LT |
| 2016-2018 | Chevrolet | Camaro | SS |
| 2017-2018 | Chevrolet | Camaro | ZL1 |
$367.00
Give your ride an attitude adjustment and stand out from the crowd with the Nissan GT-R ColorSHIFT(tm) RGB+W Headlight DRL Upgrades for the 2015-2021 models from ORACLE Lighting! Featuring our new high-performance RGB+W chips, this new kit allows you to utilize the existing DRL feature on your Nissan GT-R LED headlights and easily convert it to color-changing DRLs while maintaining a true white DRL. These replacement boards feature our traditional RGB ColorSHIFT(tm) technology along with an extra "white LED" which allows for truer white tones, a crisp white DRL color option, and the ability to instantly switch over for 100% legal road driving. These DRL boards can make hundreds of different colors and dozens of patterns, giving you control of the brightness and even the speed of the functions as well! This technology on the eye-catching "lightning bolt"-style headlight makes for a head-turning front-end on your Nissan GT-R, perfect for standing out in a crowd.
- True White LED + ColorSHIFT
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020 | Nissan | GT-R | 50th Anniversary Edition |
| 2015-2016 | Nissan | GT-R | Black Edition |
| 2015-2021,2023-2024 | Nissan | GT-R | Nismo |
| 2015-2021,2023-2024 | Nissan | GT-R | Premium |
| 2018-2019 | Nissan | GT-R | Pure |
| 2024 | Nissan | GT-R | Skyline Edition |
| 2021,2024 | Nissan | GT-R | T-spec |
| 2024 | Nissan | GT-R | T-spec Takumi Edition |
| 2015,2018-2020 | Nissan | GT-R | Track Edition |
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2023 | Ford | F-150 | King Ranch |
| 2021-2023 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2023 | Ford | F-150 | Platinum |
| 2021-2023 | Ford | F-150 | Police Responder |
| 2021-2023 | Ford | F-150 | Raptor |
| 2021-2023 | Ford | F-150 | SSV |
| 2021-2023 | Ford | F-150 | Tremor |
| 2021-2023 | Ford | F-150 | XL |
| 2021-2023 | Ford | F-150 | XLT |
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2023 | Ford | F-150 | King Ranch |
| 2021-2023 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2023 | Ford | F-150 | Platinum |
| 2021-2023 | Ford | F-150 | Police Responder |
| 2021-2023 | Ford | F-150 | Raptor |
| 2021-2023 | Ford | F-150 | SSV |
| 2021-2023 | Ford | F-150 | Tremor |
| 2021-2023 | Ford | F-150 | XL |
| 2021-2023 | Ford | F-150 | XLT |
$396.99
It’s time to transform your Bronco into a premium ride that is with our Luminix DRLs that replace the factory hood handles. Fits Ford Bronco. This missing touch of sleek elegance that your ride needs it’s just a simple upgrade away. Packed with numerous custom start-up sequences, turn signals, and the ability to choose white or amber colors to match your style seamlessly. You can easily install them within 30 minutes as they are a direct bolt-on replacement with an easy Plug-N-Play connection directly into the headlight harness. Programming them is a breeze with the “tap-to-ground” feature, allowing you to select your preferred start-up sequence, turn signal, and color or DRL (Amber or White). These DRLs are designed by Putco Inc. in Des Moines, Iowa, and come with Putco’s 3-Year Warranty on Luminix™ Products, so you can be confident in their durability and quality. Upgrade your Ford Bronco today with our LED DRLs and experience the premium touch you’ve been missing!
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | Bronco | Badlands |
| 2021-2023,2025 | Ford | Bronco | Base |
| 2021-2025 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2025 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2025 | Ford | Bronco | Outer Banks |
| 2022-2025 | Ford | Bronco | Raptor |
| 2025 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
$1,050.95
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | King Ranch |
| 2017-2020 | Ford | F-150 | Lariat |
| 2017-2020 | Ford | F-150 | Limited |
| 2017-2020 | Ford | F-150 | Platinum |
| 2018-2020 | Ford | F-150 | Police Responder |
| 2017-2020 | Ford | F-150 | Raptor |
| 2017-2020 | Ford | F-150 | SSV |
| 2017-2020 | Ford | F-150 | XL |
| 2017-2020 | Ford | F-150 | XLT |
$464.95
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2020 | Ford | F-150 | King Ranch |
| 2015-2020 | Ford | F-150 | Lariat |
| 2016-2020 | Ford | F-150 | Limited |
| 2015-2020 | Ford | F-150 | Platinum |
| 2018-2020 | Ford | F-150 | Police Responder |
| 2017-2020 | Ford | F-150 | Raptor |
| 2016-2020 | Ford | F-150 | SSV |
| 2015-2020 | Ford | F-150 | XL |
| 2015-2020 | Ford | F-150 | XLT |
| 2017-2022 | Ford | F-250 Super Duty | King Ranch |
| 2017-2022 | Ford | F-250 Super Duty | Lariat |
| 2018-2022 | Ford | F-250 Super Duty | Limited |
| 2017-2022 | Ford | F-250 Super Duty | Platinum |
| 2017-2022 | Ford | F-250 Super Duty | XL |
| 2017-2022 | Ford | F-250 Super Duty | XLT |
| 2017-2022 | Ford | F-350 Super Duty | King Ranch |
| 2017-2022 | Ford | F-350 Super Duty | Lariat |
| 2018-2022 | Ford | F-350 Super Duty | Limited |
| 2017-2022 | Ford | F-350 Super Duty | Platinum |
| 2017-2022 | Ford | F-350 Super Duty | XL |
| 2017-2022 | Ford | F-350 Super Duty | XLT |
The MBRP reverse light kit adds two LED flood lights to the back of a 2024-2026 Ford Ranger Raptor. It is a bolt-on, vehicle-specific kit built for the Ranger Raptor only, and it is meant to improve what you can see behind the truck.
Two bright LED lights. The kit has two 20-watt LED lights, each rated at 1920 lumens.
Wide flood beam. The flood beam pattern spreads light widely to help with rear visibility on the trail, at the worksite or in tight parking spaces.
Black housings and brackets. The lights have a black housing and mount on black laser-cut brackets.
Easy to install. MBRP designed the kit as a bolt-on for the Ranger Raptor.
Features
- Kit contains two LED lights
- Flood beam pattern
- 20-watt LED power, 1920 lumens per light
- Black laser-cut brackets
- For the Ranger Raptor only
- 1-year MBRP warranty
Emissions: California Proposition 65 warning applies (chromium, nickel). This is a lighting part, not an exhaust or emissions part.
Fitment: 2024-2026 Ford Ranger Raptor. Fitment confirmed against MBRP's published application list.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The MBRP ditch light brackets give you a mounting point for ditch lights on a 2021-2026 Ford F-150 Raptor or a 2023-2026 Raptor R. The kit has both the driver-side and passenger-side brackets in a black-coated steel finish.
Brackets only. MBRP states that lights are not included. The brackets are the foundation for mounting your own ditch lights, so you can choose the light assemblies you prefer.
Black-coated steel. The brackets are black-coated steel for a sleek, dark look.
Both sides in the kit. The kit contains a passenger-side and a driver-side bracket.
Features
- Black-coated steel ditch light brackets
- Kit includes driver-side and passenger-side brackets
- Lights not included
- 1-year MBRP warranty
Emissions: California Proposition 65 warning applies (chromium, nickel). This is not an exhaust or emissions part.
Fitment: 2021-2026 Ford F-150 Raptor and 2023-2026 Ford F-150 Raptor R; MBRP also lists the F-150 trims shown below. Fitment confirmed against MBRP's published application list.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | Police Responder |
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2021-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
$262.99
Get ready for the next generation in DRL and approach lighting (at night) for the front end of your truck. The Putco Virtual Blade™ LED Grille Lights are specifically designed to give your truck the most premium of looks and high-end design you could ask for. These lights are equipped with fully sequential scanning lights powered by high-powered LEDs that are visible day and night as a solid beam of light. These lights can be activated the moment you unlock your door or start up your engine. Don’t settle for cheaper lights that will fail after just the first car wash, these Virtual Blades have the same best-in-class design as the original Blade, with LEDs that are fully encapsulated in a polycarbonate housing filled with resin giving them the best durability and against weatherproofing from water and any road debris.Can't find your vehicle on our application guide? Don't worry, you can order the same product in the Light Bar size you need!, they are available in 37", 32", 15" Pairs, and 8" Pairs
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2026 | Chevrolet | Silverado 1500 | Custom |
| 2019-2026 | Chevrolet | Silverado 1500 | Custom Trail Boss |
| 2019-2026 | Chevrolet | Silverado 1500 | High Country |
| 2019-2026 | Chevrolet | Silverado 1500 | LT |
| 2019-2026 | Chevrolet | Silverado 1500 | LT Trail Boss |
| 2019-2026 | Chevrolet | Silverado 1500 | LTZ |
| 2023-2026 | Chevrolet | Silverado 1500 | PPV |
| 2019-2026 | Chevrolet | Silverado 1500 | RST |
| 2019-2021 | Chevrolet | Silverado 1500 | SSV |
| 2019-2026 | Chevrolet | Silverado 1500 | WT |
| 2022-2026 | Chevrolet | Silverado 1500 | ZR2 |
| 2020-2025 | Chevrolet | Silverado 2500 HD | Custom |
| 2020-2025 | Chevrolet | Silverado 2500 HD | High Country |
| 2020-2025 | Chevrolet | Silverado 2500 HD | LT |
| 2020-2025 | Chevrolet | Silverado 2500 HD | LTZ |
| 2020-2025 | Chevrolet | Silverado 2500 HD | WT |
| 2024-2025 | Chevrolet | Silverado 2500 HD | ZR2 |
| 2020-2025 | Chevrolet | Silverado 3500 HD | High Country |
| 2020-2025 | Chevrolet | Silverado 3500 HD | LT |
| 2020-2025 | Chevrolet | Silverado 3500 HD | LTZ |
| 2020-2025 | Chevrolet | Silverado 3500 HD | WT |
| 2021-2025 | Ford | F-150 | King Ranch |
| 2021-2025 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2025 | Ford | F-150 | Platinum |
| 2021-2025 | Ford | F-150 | Police Responder |
| 2021-2025 | Ford | F-150 | Raptor |
| 2021-2025 | Ford | F-150 | SSV |
| 2024-2025 | Ford | F-150 | STX |
| 2021-2025 | Ford | F-150 | Tremor |
| 2021-2025 | Ford | F-150 | XL |
| 2021-2025 | Ford | F-150 | XLT |
| 2017-2023 | Ford | F-250 Super Duty | King Ranch |
| 2017-2023 | Ford | F-250 Super Duty | Lariat |
| 2018-2023 | Ford | F-250 Super Duty | Limited |
| 2017-2023 | Ford | F-250 Super Duty | Platinum |
| 2017-2023 | Ford | F-250 Super Duty | XL |
| 2017-2023 | Ford | F-250 Super Duty | XLT |
| 2017-2023 | Ford | F-350 Super Duty | King Ranch |
| 2017-2023 | Ford | F-350 Super Duty | Lariat |
| 2018-2023 | Ford | F-350 Super Duty | Limited |
| 2017-2023 | Ford | F-350 Super Duty | Platinum |
| 2017-2023 | Ford | F-350 Super Duty | XL |
| 2017-2023 | Ford | F-350 Super Duty | XLT |
| 2019-2026 | GMC | Sierra 1500 | AT4 |
| 2022-2026 | GMC | Sierra 1500 | AT4X |
| 2019-2021 | GMC | Sierra 1500 | Base |
| 2019-2026 | GMC | Sierra 1500 | Denali |
| 2022-2026 | GMC | Sierra 1500 | Denali Ultimate |
| 2019-2026 | GMC | Sierra 1500 | Elevation |
| 2022-2026 | GMC | Sierra 1500 | Pro |
| 2019-2026 | GMC | Sierra 1500 | SLE |
| 2019-2026 | GMC | Sierra 1500 | SLT |
| 2020-2025 | GMC | Sierra 2500 HD | AT4 |
| 2024-2025 | GMC | Sierra 2500 HD | AT4X |
| 2020-2021 | GMC | Sierra 2500 HD | Base |
| 2020-2025 | GMC | Sierra 2500 HD | Denali |
| 2024-2025 | GMC | Sierra 2500 HD | Denali Ultimate |
| 2022-2025 | GMC | Sierra 2500 HD | Pro |
| 2020-2025 | GMC | Sierra 2500 HD | SLE |
| 2020-2025 | GMC | Sierra 2500 HD | SLT |
| 2020-2025 | GMC | Sierra 3500 HD | AT4 |
| 2020-2021 | GMC | Sierra 3500 HD | Base |
| 2020-2025 | GMC | Sierra 3500 HD | Denali |
| 2024-2025 | GMC | Sierra 3500 HD | Denali Ultimate |
| 2022-2025 | GMC | Sierra 3500 HD | Pro |
| 2020-2025 | GMC | Sierra 3500 HD | SLE |
| 2020-2025 | GMC | Sierra 3500 HD | SLT |
| 2022-2025 | Toyota | Tundra | 1794 Edition |
| 2022-2025 | Toyota | Tundra | Capstone |
| 2022-2025 | Toyota | Tundra | Limited |
| 2022-2025 | Toyota | Tundra | Platinum |
| 2022-2025 | Toyota | Tundra | SR |
| 2022-2025 | Toyota | Tundra | SR5 |
| 2022-2025 | Toyota | Tundra | TRD Pro |
$599.99
The NACHO Plug N Play Kit is exactly that. This kit comes with everything needed to swap out your stock fog lights in your single piece plastic bumper and bring style and more usable output to your fog lights. The kit consists of 2 Quatro SAE Amber lens lights, 2 mounting brackets, oem connectors for the lights to plug directly into the factory fog light plug. This makes for a quick and easy swap while maintaining the factory switching and the piece of mind. The Quatro SAE is still equipped with our TRL or Trail Running Light and includes a light connector and fuse tap harness to power the TRL to your auxiliary power. Increase performance, visibility, and style. Bronco's are not meant to be tamed.
- Everything included to install
- Vehicle Specific Wire Lengths
- Powder Coated Steel Brackets
- No Cutting or Trimming
- Factory Plugs
- Easy Install
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | Bronco | Badlands |
| 2021-2023,2025-2026 | Ford | Bronco | Base |
| 2021-2026 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2026 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2026 | Ford | Bronco | Outer Banks |
| 2022-2026 | Ford | Bronco | Raptor |
| 2025-2026 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
$599.99
The NACHO Plug N Play Kit is exactly that. This kit comes with everything needed to swap out your stock fog lights in your single piece plastic bumper and bring style and more usable output to your fog lights. The kit consists of 2 Quatro SAE Amber lens lights, 2 mounting brackets, oem connectors for the lights to plug directly into the factory fog light plug. This makes for a quick and easy swap while maintaining the factory switching and the piece of mind. The Quatro SAE is still equipped with our TRL or Trail Running Light and includes a light connector and fuse tap harness to power the TRL to your auxiliary power. Increase performance, visibility, and style. Bronco's are not meant to be tamed.
- Everything included to install
- Vehicle Specific Wire Lengths
- Powder Coated Steel Brackets
- No Cutting or Trimming
- Factory Plugs
- Easy Install
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | Bronco | Badlands |
| 2021-2023,2025-2026 | Ford | Bronco | Base |
| 2021-2026 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2026 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2026 | Ford | Bronco | Outer Banks |
| 2022-2026 | Ford | Bronco | Raptor |
| 2025-2026 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
$679.99
Designed for adventure, the RIGID 4-inch 360-Series Spot A-Pillar Kit for the Ford F-150 21-27 includes vehicle-specific brackets, wiring harness, and premium light pods to improve trail visibility while maintaining a factory-style appearance.
- 360-Series Spot A-Pillar Kit
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | Police Responder |
| 2023-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
$839.99
Designed for adventure, the RIGID D-XL A-Pillar Kit for the Ford F-150 21-27 includes vehicle-specific brackets, wiring harness, and premium light pods to improve trail visibility while maintaining a factory-style appearance.
- D-XL Spot A-Pillar Kit
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | Police Responder |
| 2023-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
$639.99
Designed for adventure, the RIGID 4-inch D-SS Spot A-Pillar Kit for the Ford F-150 21-27 includes vehicle-specific brackets, wiring harness, and premium light pods to improve trail visibility while maintaining a factory-style appearance.
- D-SS Spot A-Pillar Kit
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | Police Responder |
| 2023-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
$319.95
Fits the 2024-2026 Ford Ranger Raptor front bumper fog light pockets.
This Baja Designs S1 Fog Pocket Light Kit replaces the factory fog light pockets with a pair of S1 LED light pods in Baja Amber and a wide cornering pattern. It is built for low-visibility use in fog, dust, rain, and snow, and it keeps the OEM fog light switch function through the factory wiring.
- MPN: 448359
- Includes two S1 wide cornering LED light pods with Baja Amber lenses
- Includes vehicle-specific front and rear fog light bracket sets
- Includes plug-and-play adapter harnesses
- Includes mounting hardware and zip ties for harness retention
- 2,320 raw lumens per pod
- 20 watts / 1.42 amps per pod
- 5000K color temperature
- Hard-coated polycarbonate lens
- IP69K waterproof, rainproof, and submersible rating
- uService replaceable lenses and optics system
- ClearView optical reflector layout
- MoistureBlock O-ring seal system
- DirectSink thermal path heat dissipation
Installation is a true drop-in fit with no drilling or cutting of the vehicle bodywork. On the 2024-2026 Ranger Raptor, Baja Designs recommends parking on level ground with the parking brake engaged and removing the front wheel for access. The documented install uses a T30 Torx bit/driver, T25 Torx bit/driver, 3mm Allen bit, 10mm wrench or socket, 7mm wrench or socket, and a Phillips screwdriver or clip removal tool. Factory hardware removed during disassembly is retained and reused.
The install sequence on the Ranger Raptor includes removing the plastic air vent, loosening the inner fender liner, unplugging the factory fog light connector, removing the OEM fog light housing, aligning the S1 pod to the front bracket, securing the rear bracket with 3mm hardware, twisting the assembly into the fog pocket, and connecting the plug-and-play harness. Do not overtighten the self-tapping hardware.
It arrives as a complete lighting kit ready for a vehicle-specific pocket installation. Baja Designs lists a 30-day satisfaction guarantee and a limited lifetime warranty covering manufacturer defects. California Proposition 65 warning for cancer and reproductive harm applies.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering.
$2,045.95
Front bumper-mounted LED lighting kit for the 2024-2026 Ford F-150 King Ranch, Lariat, Platinum, Police Responder, Raptor, SSV, STX, Tremor, XL, and XLT. Baja Designs designed this 6XL Linkable bumper kit to sit low and help reduce hood glare while adding forward illumination across multiple lighting zones.
The kit uses a modular XL Linkable layout with independent adjustment for each light module, so the assembly can be set up straight or in an arc to follow the front of the truck. Baja Designs lists 45 degrees of vertical pitch adjustment per module or across the full bar, plus horizontal adjustment for each module. The 6XL Pro configuration is listed at 24,570 total raw lumens and 5000K Daylight color temperature.
Housing and optical features include DirectSink thermal management, CopperDrive LED driver technology, MoistureBlock waterproof protection, uService replaceable lenses and optics, and an IP69K environmental rating. The kit is intended for low bumper mounting and includes a pre-load support bracket kit for added rigidity on rough terrain.
- Baja Designs part number: 448314
- 6XL Linkable LED light bar in Pro output configuration
- Two Ford bumper mounting brackets
- Pre-load support bracket kit
- Pre-crimped wiring harness, part #640163
- Six black rock guards with Baja Designs logo
- All necessary mounting hardware
Installation is a bumper-mount application and uses the included brackets, harness, and hardware. The harness arrives fully crimped and trimmed for a cleaner install. This kit is meant for the Ford F-150 applications listed above; the fitment is specific to those trims and year range. Baja Designs also notes the modular design allows additional light links/modules to be added later if you want to expand the system.
The kit arrives as a complete mounting and lighting package with the bar, brackets, support hardware, guards, and harness included. It is built around a low-profile forward lighting layout that keeps the beam low on the vehicle and away from the hood line.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | F-150 | King Ranch |
| 2024-2026 | Ford | F-150 | Lariat |
| 2024-2026 | Ford | F-150 | Platinum |
| 2024-2026 | Ford | F-150 | Police Responder |
| 2024-2026 | Ford | F-150 | Raptor |
| 2024-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2024-2026 | Ford | F-150 | Tremor |
| 2024-2026 | Ford | F-150 | XL |
| 2024-2026 | Ford | F-150 | XLT |
$756.95
Fits 2010-2014 Ford F-150 SVT Raptor.
Baja Designs Squadron Sport “Sportsmen” Dual Fog Pocket Light Kit, part number 447847, replaces the factory bumper fog light pockets with a dual pod mount for the 1st-gen Ford F-150 SVT Raptor. It is built to hold two Squadron Sport LED lights per side for a total of four pods, and it wires into the factory upfitter switch setup with the included harnesses.
This kit is built around clear Squadron Sport pods with a mix of beam patterns for distance and forward coverage. The included spot pods use a 9-degree beam, while the driving combo pods combine 42-degree driving optics with 9-degree spot optics. Baja Designs lists 3,162 raw lumens per pod, 12,648 raw lumens total, 30.36 watts per pod, 2.2 amps per pod, and a 5000K daylight color temperature.
- Fits the OEM front bumper fog light pockets on the 2010-2014 Ford F-150 SVT Raptor
- Part number: 447847
- (2) Squadron Sport Spot Clear LED light pods
- (2) Squadron Sport Driving Combo Clear LED light pods
- (2) front bumper fog pocket mounting brackets
- (2) upfitter wiring harnesses, part number 640093
- (2) 55-inch splitter wiring harnesses, part number 613606
- All necessary mounting hardware
- Clear lens color
- uService technology for replaceable lenses and optics
- MoistureBlock housing protection
- DirectSink thermal design
- ClearView optics
Installation is direct to the factory fog pocket area. The kit uses the supplied brackets and hardware, and it includes the harnesses needed to connect to factory upfitter switches. No special tool list or torque specification was provided by the manufacturer, so plan on standard hand tools and following the Baja Designs installation sheet for your truck. The lights, brackets, and wiring components should arrive as a complete kit ready for installation.
Baja Designs lists a 30-day money back guarantee and a limited lifetime warranty.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | FX2 |
| 2010-2014 | Ford | F-150 | FX4 |
| 2010-2012 | Ford | F-150 | Harley-Davidson Edition |
| 2010-2014 | Ford | F-150 | King Ranch |
| 2010-2014 | Ford | F-150 | Lariat |
| 2011 | Ford | F-150 | Lariat Limited |
| 2013-2014 | Ford | F-150 | Limited |
| 2010-2014 | Ford | F-150 | Platinum |
| 2010-2014 | Ford | F-150 | STX |
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2010-2014 | Ford | F-150 | XL |
| 2010-2014 | Ford | F-150 | XLT |
$2,664.95
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | Bronco | Badlands |
| 2021-2023,2025-2026 | Ford | Bronco | Base |
| 2021-2026 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2026 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2026 | Ford | Bronco | Outer Banks |
| 2022-2026 | Ford | Bronco | Raptor |
| 2025-2026 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
Manufacturer part number: 447770
$386.95
The Baja Designs Squadron Sport 2.0 A-Pillar Kit mounts auxiliary LED pods to the factory upper A-pillar/cowl locations on full-size Ford Bronco models. It is a direct bolt-on setup built for spot-pattern forward lighting, with vehicle-specific brackets that keep the pods tucked tight to the body while aiming light down the trail or road.
This kit fits the following vehicles:
- 2021-2026 Ford Bronco Badlands
- 2021-2023 Ford Bronco Base
- 2025-2026 Ford Bronco Base
- 2021-2026 Ford Bronco Big Bend
- 2021-2024 Ford Bronco Black Diamond
- 2022-2024 Ford Bronco Everglades
- 2021 Ford Bronco First Edition
- 2023-2026 Ford Bronco Heritage Edition
- 2023-2024 Ford Bronco Heritage Limited Edition
- 2021-2026 Ford Bronco Outer Banks
- 2022-2026 Ford Bronco Raptor
- 2025-2026 Ford Bronco Stroppe Edition
- 2021-2024 Ford Bronco Wildtrak
The kit includes two Squadron Sport 2.0 LED light pods in a clear spot configuration, vehicle-specific driver and passenger mounting brackets, an upfitter wiring harness, a 55-inch 4-pin Deutsch splitter harness, two clear driving-combo alternate lens kits, two clear wide-cornering alternate lens kits, and the complete mounting hardware package. The lights use a 4-pin Deutsch-style connector, 12V-32V DC operating range, 3,200 lumens per light, 30 watts per light, 2.2 amps per light at 13.8V DC, 5,000K color temperature, and a selectable 9-color RGB backlight with memory. Baja Designs also lists DirectSink thermal management, MoistureBlock O-ring sealing, and uService replaceable lenses and optics with clip-in reflectors.
Installation is bolt-on at the factory mounting points and does not require cutting, drilling, or body modification. The wiring harness is designed to connect to Ford OEM auxiliary switch wiring. On 2022-2024 Ford Bronco Raptor models, AUX1 and AUX3 wire colors are swapped at the factory compared with standard Bronco models, so wiring should be checked carefully during install. The redesigned bracket provides expanded vertical tilt adjustment for aiming.
- MPN: 440088UP
- Clear spot beam pattern
- Two light pods
- Direct bolt-on A-pillar/cowl mount
- 4-pin Deutsch-style electrical connection
- IP69K water resistance
- Shipping package: 10 in x 12 in x 5 in
- Shipping weight: 4.4 lb
The kit is built for Bronco and Bronco Raptor applications only, with fitment listed above from the manufacturer table. It arrives as a complete lighting and mounting package, ready for vehicle-specific installation with the included brackets, harnesses, lenses, and hardware.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | Bronco | Badlands |
| 2021-2023,2025-2026 | Ford | Bronco | Base |
| 2021-2026 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2026 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2026 | Ford | Bronco | Outer Banks |
| 2022-2026 | Ford | Bronco | Raptor |
| 2025-2026 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
$381.95
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | Bronco | Badlands |
| 2021-2023,2025-2026 | Ford | Bronco | Base |
| 2021-2026 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2026 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2026 | Ford | Bronco | Outer Banks |
| 2022-2026 | Ford | Bronco | Raptor |
| 2025-2026 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
Manufacturer part number: 440088
$584.95
Fits the 2021-2026 Ford Bronco Badlands, 2021-2023 Ford Bronco Base, 2025-2026 Ford Bronco Base, 2021-2026 Ford Bronco Big Bend, 2021-2024 Ford Bronco Black Diamond, 2022-2024 Ford Bronco Everglades, 2021 Ford Bronco First Edition, 2023-2026 Ford Bronco Heritage Edition, 2023-2024 Ford Bronco Heritage Limited Edition, 2021-2026 Ford Bronco Outer Banks, 2022-2026 Ford Bronco Raptor, 2025-2026 Ford Bronco Stroppe Edition, and 2021-2024 Ford Bronco Wildtrak.
This Baja Designs Squadron Pro 2.0 A-Pillar Kit mounts two auxiliary LED pods at the Bronco’s windshield base using factory A-pillar mounting points. It is built for ditch-light duty: better trail-side visibility, cleaner light placement, and a spot pattern aimed farther down the road or trail. The kit uses a clear spot lens from the factory and includes additional lens kits so you can change the beam pattern as needed.
The Squadron Pro 2.0 pod uses a powder-coated cast aluminum housing, a hardcoated polycarbonate lens, stainless steel mounting hardware, and a standard 4-pin Deutsch-style connector. Baja Designs lists IP69K protection, user-replaceable optics through uService, ClearView optical distribution, MoistureBlock weather sealing, and DirectSink thermal management. The integrated backlight is color-selectable with 9 user-selectable colors.
- MPN: 440087UP
- Clear spot lens pre-installed
- 2 Squadron 2.0 Pro LED light pods
- 2 vehicle-specific A-pillar mounting brackets
- 1 upfitter wiring harness
- 1 55-inch 4-pin Deutsch splitter harness
- 2 additional Squadron 2.0 lens kits: clear driving combo
- 2 additional Squadron 2.0 lens kits: clear wide cornering
- Stainless steel mounting hardware
- 65 watts / 4.7 amps per light at 13.8V DC
- Operating voltage: 12V to 32V DC
- 5000K daylight color temperature
- 5,921 raw lumens per light
Installation is direct bolt-on at the factory A-pillar points with no cutting or drilling required. The supplied upfitter harness is designed to tie into the factory overhead upfitter switch provisions. On Bronco Raptor models, Baja Designs notes the factory upfitter wiring has AUX1 and AUX3 wire colors reversed compared with standard Bronco models, so verify connections before final wiring. The kit arrives as a complete mounting and wiring package with the light pods preconfigured with the clear spot optics installed.
Because the kit is trim-specific, the fitment follows the exact Bronco submodels listed above. The Bronco Raptor uses the same kit, but Baja Designs calls out a wiring-color difference at the upfitter provision that matters during hookup. This is the kind of detail that saves time on the install and helps avoid swapping wires at the overhead switch panel.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | Bronco | Badlands |
| 2021-2023,2025-2026 | Ford | Bronco | Base |
| 2021-2026 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2026 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2026 | Ford | Bronco | Outer Banks |
| 2022-2026 | Ford | Bronco | Raptor |
| 2025-2026 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
$1,357.95
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | Bronco | Badlands |
| 2021-2023,2025-2026 | Ford | Bronco | Base |
| 2021-2026 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2026 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2026 | Ford | Bronco | Outer Banks |
| 2022-2026 | Ford | Bronco | Raptor |
| 2025-2026 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
Manufacturer part number: 440084UP
$1,167.95
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | Bronco | Badlands |
| 2021-2023,2025-2026 | Ford | Bronco | Base |
| 2021-2026 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2026 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2026 | Ford | Bronco | Outer Banks |
| 2022-2026 | Ford | Bronco | Raptor |
| 2025-2026 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
Manufacturer part number: 440083UP
$1,197.95
Baja Designs vehicle-specific fog pocket LED light kit for the Ford Bronco. It mounts into the factory fog light locations on Broncos equipped with the factory Steel Bumper or Modular Steel Bumper and combines two beam types in one complete setup: SAE amber fog lighting for the street and spot/driving-combo lighting for off-road use.
This kit includes 2 Squadron 2.0 Sport clear spot lights, 2 S2 Sport clear driving/combo lights, and 2 S2 SAE amber fog lights, plus vehicle-specific steel bumper fog pocket mounting brackets, an on/off toggle wiring harness, and stainless steel mounting hardware.
The Squadron 2.0 Sport pods use clear lenses, a spot beam, a 4-pin Deutsch-style connector, and a user-selectable backlight with 9 color options. Baja Designs lists 3,200 lumens and 30W / 2.2A per light, along with an updated lens pattern, clip-in secure reflectors, and a redesigned weather gasket. The S2 Sport pods use clear lenses and a driving/combo beam, with 1,581 lumens and 12.42W / 0.9A per light. The S2 SAE pods use amber lenses, aspheric projector optics, a controlled SAE fog pattern with sharp cutoff, 1,210 lumens, and up to 5,712 candela per light. Baja Designs states the SAE fog lamps are fully compliant with SAE J583 fog lamp standards for street-legal use.
Construction details called out for this kit include a black powder-coated aluminum housing, hard-coated polycarbonate lens, billet machined aluminum bezel, stainless steel mounting brackets and hardware, Cree LED emitters, IP69K water and dust resistance, IK10 impact compliance, built-in overvoltage protection, and a 49,930-hour LED life expectancy. The system uses ClearView, MoistureBlock, and DirectSink technology, and the mounting brackets provide expanded vertical aiming adjustability.
Installation is straightforward for the Bronco owner who already has the correct factory bumper. The kit is designed as a complete package and does not require additional parts for installation. The included wiring harness handles the on/off control. The S2 SAE housings are not intended to be opened or tampered with; Baja Designs states that doing so voids the warranty and that SAE units must be returned to Baja Designs for repair. Baja Designs also backs the kit with a 30-day satisfaction guarantee and a Limited Lifetime Warranty.
Fitment summary: fits the 2021-2026 Ford Bronco and 2022-2024 Ford Bronco Raptor when equipped with the factory Steel Bumper or Modular Steel Bumper.
- MPN: 440083
- Complete 6-pod fog pocket kit
- 2 Squadron 2.0 Sport clear spot lights
- 2 S2 Sport clear driving/combo lights
- 2 S2 SAE amber fog lights
- Vehicle-specific steel bumper fog pocket brackets
- On/off toggle wiring harness
- Stainless steel mounting hardware
- Does not fit Bronco models with standard plastic front bumpers
- Made in the USA, San Marcos, CA
Fitment details supplied for this part include 2021-2026 Ford Bronco Badlands, 2021-2023 Ford Bronco Base, 2025-2026 Ford Bronco Base, 2021-2026 Ford Bronco Big Bend, 2021-2024 Ford Bronco Black Diamond, 2022-2024 Ford Bronco Everglades, 2021 Ford Bronco First Edition, 2023-2026 Ford Bronco Heritage Edition, 2023-2024 Ford Bronco Heritage Limited Edition, 2021-2026 Ford Bronco Outer Banks, 2022-2026 Ford Bronco Raptor, 2025-2026 Ford Bronco Stroppe Edition, and 2021-2024 Ford Bronco Wildtrak. The vehicle must have the factory Steel Bumper or Modular Steel Bumper for this kit to install correctly.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | Bronco | Badlands |
| 2021-2023,2025-2026 | Ford | Bronco | Base |
| 2021-2026 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2026 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2026 | Ford | Bronco | Outer Banks |
| 2022-2026 | Ford | Bronco | Raptor |
| 2025-2026 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
$558.95
Fits the 2021-2026 Ford F-150 King Ranch, 2021-2026 Ford F-150 Lariat, 2021-2023 Ford F-150 Limited, 2021-2026 Ford F-150 Platinum, 2021-2026 Ford F-150 Police Responder, 2021-2026 Ford F-150 Raptor, 2021-2026 Ford F-150 SSV, 2024-2026 Ford F-150 STX, 2021-2026 Ford F-150 Tremor, 2021-2026 Ford F-150 XL, and 2021-2026 Ford F-150 XLT.
This Baja Designs Squadron Sport 2.0 A-Pillar Kit mounts dual auxiliary LED pods at the base of the windshield A-pillars to add ditch and trail lighting where the factory headlights leave blind spots. The kit comes with a clear lens and Driving/Combo beam pattern pre-installed, plus vehicle-specific Ford F-150 brackets for a direct bolt-on install with no cutting or drilling required.
Use the included upfitter wiring harness and 55-inch splitter harness to tie into the truck’s auxiliary upfitter switches. Baja Designs also includes all necessary mounting hardware, so the box is ready for a complete install once the vehicle-side wiring is prepared.
The Squadron 2.0 Sport platform uses ClearView optics, a DirectSink thermal path, MoistureBlock waterproof construction, redesigned gasket sealing, and uService replaceable lenses and optics with clip-in reflectors. The light also features a 5000K daylight color temperature, 4-pin Deutsch-style weatherproof connectors, and an integrated RGBW backlight with 9 user-selectable colors.
- MPN: 440022
- 2 Squadron 2.0 Sport LED lights with clear lenses and Driving/Combo pattern
- 2 vehicle-specific A-pillar mounting brackets
- 1 upfitter wiring harness
- 1 55-inch splitter harness
- 2 Squadron 2.0 Spot Clear Lens Kits
- 2 Squadron 2.0 Wide Cornering Clear Lens Kits
- All necessary mounting hardware
- 3,200 raw lumens per light, 6,400 raw lumens total
- 30W / 2.2A per light, 60W / 4.4A total
- 26% performance increase over previous-generation Squadron Sport lights
- 30-day money back guarantee
- Limited lifetime warranty
Because the brackets are vehicle-specific, aim the pods after mounting to match your truck’s stance and A-pillar angle. The redesigned bracket gives expanded vertical tilt adjustability for beam aiming. The kit arrives as a complete auxiliary lighting package with the lights, brackets, harnessing, lenses, and hardware needed for installation.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | Police Responder |
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
$737.95
Fits the 2021-2026 Ford F-150 King Ranch, 2021-2026 Ford F-150 Lariat, 2021-2023 Ford F-150 Limited, 2021-2026 Ford F-150 Platinum, 2021-2026 Ford F-150 Police Responder, 2021-2026 Ford F-150 Raptor, 2021-2026 Ford F-150 SSV, 2024-2026 Ford F-150 STX, 2021-2026 Ford F-150 Tremor, 2021-2026 Ford F-150 XL, and 2021-2026 Ford F-150 XLT.
Baja Designs Squadron Pro 2.0 A-pillar kit mounts a pair of auxiliary LED pods at the ditch-light position to add wide-angle illumination beyond the headlight beam. The Driving/Combo clear pattern is aimed at lighting both the road edge and the trail shoulder, which helps reduce dark spots alongside the truck at night.
The kit uses vehicle-specific A-pillar brackets and a direct bolt-on installation. Baja Designs includes the upfitter wiring harness and a 55-inch splitter harness, so the lights can be tied into factory upfitter switches without cutting or drilling. The brackets have vertical adjustability for aiming, and the lights are built around Baja Designs' uService design with user-replaceable lenses and optics.
- Manufacturer part number: 440021
- Kit includes two Squadron 2.0 Pro LED lights in Driving/Combo clear
- Includes two vehicle-specific A-pillar mounting brackets
- Includes one upfitter wiring harness and one 55-inch splitter wiring harness
- Includes two Squadron 2.0 lens kits: Spot, Clear and Wide Cornering, Clear
- Includes mounting hardware
- IP69K rated for water, rain, and submersion up to 9 feet
- 4-pin Deutsch connector
- Main light operating voltage: 10V to 36V DC
- Backlight operating voltage: 11V to 14V DC
- Color temperature: 5000K daylight natural white light
- Power draw: 65 watts per light
- Current draw: 4.7 amps at 13.8V DC per light
- Light output: 5,921 lumens per light pod
- Backlight with 9 customizable color choices
- DirectSink thermal path technology and MoistureBlock waterproofing
This kit arrives as a complete lighting package for the listed Ford F-150 trims. On Raptor applications, the fitment is trim-specific; do not assume it fits other F-150 models beyond the vehicles listed above. Fastener tool sizes and torque values are vehicle-dependent and were not specified by the manufacturer, so use the proper Ford service information for your exact truck when installing.
Baja Designs lists a limited lifetime warranty for manufacturing and material defects and a 30-day satisfaction guarantee.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | Police Responder |
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
$1,564.95
Baja Designs LED fog pocket replacement kit for the Ford F-150 Raptor. It replaces the factory fog lights in the front bumper fog pockets with a vehicle-specific, direct-fit lighting package that uses six total pods: two Squadron 2.0 Pro Clear Spot, two Squadron 2.0 Pro Clear Driving Combo, and two S1 Clear Wide Cornering.
This kit is built around Baja Designs' uService design, so the lenses and optics are replaceable. It also uses MoistureBlock sealing, ClearView optics, and DirectSink thermal management. The light output is 28,324 raw lumens across all six pods, with a 5000K daylight color temperature. The Squadron 2.0 Pro pods use a standard 4-pin Deutsch-style connector and include a user-selectable RGBW backlight with nine color options: red, green, blue, magenta, cyan, amber, yellow, pink, and white.
The housings are black powder-coated aluminum with hard-coated clear polycarbonate lenses, billet machined aluminum bezels, and stainless steel mounting brackets and fasteners. The system is rated IP69K, is IK10 compliant, includes built-in overvoltage protection, and is compatible with 12V-36V DC systems. Baja Designs lists a 49,930-hour LED service life expectancy.
Fits: 2021-2026 Ford F-150 King Ranch, Lariat, Platinum, Police Responder, Raptor, SSV, Tremor, XL, and XLT; 2021-2023 Ford F-150 Limited; 2024-2026 Ford F-150 STX.
- Part number: 440020
- Direct-fit fog pocket replacement kit for the front bumper
- Includes six light pods total: four Squadron 2.0 Pro and two S1
- Vehicle-specific steel fog pocket mounting brackets
- Wiring adapter harnesses for plug-and-play operation with the factory fog light switch
- 1 two-light splitter harness, 2 x 55-inch splitter harnesses, and 1 upfitter wiring harness
- Complete stainless steel mounting hardware kit
- On a 2021+ Ford F-150 Raptor, installation uses trim removal tools and common hand tools including 4mm and 5mm hex keys, 7mm, 8mm, 10mm, and 12mm sockets, 7/16-in and 9/16-in sockets and wrenches, and a T40 Torx socket
- Lightly snug the hardware before final alignment so the pods can be centered in the bumper opening
- If the truck did not come with factory OEM fog lights, the Ford OEM Raptor Gen 3 Fog Pocket fastener kit may be required
The backlight add-on harness uses the included 5-amp fuse in the fuse tap, and cycling the switch on and off changes the backlight colors. The kit is made in the USA in San Marcos, CA.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | Police Responder |
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
$1,222.95
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | Police Responder |
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
Manufacturer part number: 440019
$1,184.95
Fits 2021-2026 Ford F-150 Raptor.
This Baja Designs fog pocket kit replaces the factory fog lights with six LED light pods mounted in the bumper fog openings. It uses clear lens optics and combines Squadron Sport 2.0 and S1 lights to add forward reach and wider foreground coverage without cutting into the bumper.
The kit is built around a powder-coated black aluminum housing with a hard-coated polycarbonate clear lens, billet machined aluminum bezel, stainless steel hardware, and bracket mounts. It uses a standard 4-pin Deutsch connector, built-in overvoltage protection, DirectSink / CopperDrive direct thermal path technology, and uService field-serviceable construction with clip-in reflectors. Baja Designs lists IP69K protection, IK10 compliance, 49,930-hour expected LED lifespan, and USA manufacture in San Marcos, CA.
- Part number: 440018
- Light configuration: 2x S1 LED lights - clear wide cornering, 2x Squadron 2.0 Sport LED lights - clear driving combo, 2x Squadron 2.0 Sport LED lights - clear spot
- Included hardware: 2 vehicle-specific fog pocket mounting brackets, 2 adaptor harnesses, 1 two-light splitter harness, 2 55-inch splitter harnesses, 1 upfitter switch wiring harness, mounting hardware set
- Factory parts reused: factory bumper mounting fasteners
- Output and draw: Squadron 2.0 Sport - 3,200 raw lumens and 30 watts/2.2 amps per light; S1 - 2,320 raw lumens and 20 watts/1.42 amps per light; total output 17,440 raw lumens
- Light characteristics: clear lens, 5000K daylight natural color, RGBW backlight with 9 user-selectable colors
- Optics: Spot, Driving Combo, and Wide Cornering patterns for long-range, mid-range, and corner coverage
- Fitment note: if the vehicle was not equipped with factory fog lights, the Gen 3 Raptor fog pocket fastener kit may be required
Installation follows the factory fog pocket area and uses the supplied brackets and harnesses. Baja Designs calls for removal of the splash guard bolts, bumper support fastener, and top fog bracket bolts, then connection of the supplied harnesses and wiring to the upfitter circuit. Fasteners are left hand-tight during alignment, then re-torqued after 100 miles. The guide also notes the battery should be disconnected during wiring, and the factory bumper mounting fasteners are reused. Installation tools referenced by Baja Designs for the 2021-on Ford F-150 Raptor include a trim removal tool or flathead screwdriver, 4mm and 5mm hex keys, 7mm, 8mm, 10mm, 12mm, 7/16 in., 9/16 in. sockets, a T40 Torx socket/bit, 7/16 in. and 9/16 in. wrenches, a multimeter or test light, scissors, and pliers.
The mounting bracket provides vertical alignment adjustment in the fog pocket, which helps center the light pods in the bumper opening. If you are adding the kit to a truck that did not come with factory fog lights, confirm whether the Gen 3 Raptor fog pocket fastener kit is needed before starting the install.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | Police Responder |
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
$1,747.95
Fits the 2021-2026 Ford F-150 Raptor, the 2024-2026 Ford F-150 Raptor R, and the 2024-2026 Ford F-150 Raptor 37.
The Baja Designs Squadron Pro 2.0 Behind Grille Kit mounts six auxiliary LED pods behind the factory grille to add forward lighting while keeping the front end looking close to stock. This MP kit uses a mix of beam patterns so you get usable light across Zones 1, 2, 3, and 4 instead of a single narrow beam.
The kit is built around compact Squadron 2.0 Pro pods with clear lenses, aluminum housings, and Baja Designs' ClearView optics. Each pod is rated at 5,921 lumens, for 35,526 lumens total system output. The lights run on 12V-32V DC, with white light operating voltage of 10V-36V and backlight operating voltage of 11V-14V. Each light draws 65 watts and 5.2 amps at 13.8V.
It includes Wide Cornering, Driving Combo, and Spot beam patterns, plus the RGBW backlight with 9 selectable colors: red, green, blue, magenta, cyan, amber, yellow, pink, and white. The system uses a weatherproof 4-pin Deutsch-style connector, MoistureBlock gaskets, and IP69K-rated sealing for harsh washdown and wet conditions. The DirectSink and CopperDrive design is used to safely drive the LEDs at full output.
Installation is a behind-the-grille, bolt-on fitment with no custom cutting or drilling of factory parts. The vehicle-specific brackets add vertical adjustability for beam aiming. The kit includes an upfitter wiring harness so the lights can be tied into the factory Ford overhead upfitter switches.
- MPN: 440017
- Behind-the-grille LED kit for a low-profile factory-look install
- Six Squadron 2.0 Pro LED pods total
- Clear lenses with Wide Cornering, Driving Combo, and Spot patterns
- RGBW backlight with 9 selectable colors
- Aluminum housings, ClearView optics, MoistureBlock sealing, and IP69K rating
- Includes vehicle-specific mounting brackets, primary wiring harness, upfitter wiring harness, and installation hardware
- Not compatible with adaptive cruise control relocation kits
Included in the box are two Wide Cornering Clear Squadron 2.0 Pro pods, two Driving Combo Clear Squadron 2.0 Pro pods, two Spot Clear Squadron 2.0 Pro pods, two behind-the-grille mounting brackets, one primary wiring harness, one upfitter wiring harness, and complete installation hardware.
Baja Designs backs this kit with a 30-day money back guarantee and a limited lifetime warranty.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | Police Responder |
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
$1,167.95
Baja Designs Squadron Sport 2.0 Behind-the-Grille Kit, part number 440016, mounts six Squadron 2.0 Sport LED pods behind the OEM Ford grille for auxiliary lighting while keeping the front end looking factory.
Fitment summary: 2021-2026 Ford F-150 King Ranch, Lariat, Platinum, Police Responder, Raptor, SSV, Tremor, XL, and XLT; 2021-2023 Ford F-150 Limited; 2024-2026 Ford F-150 STX.
This kit uses vehicle-specific steel brackets and a bolt-on layout. Baja Designs says it installs without cutting or drilling factory components. The included main wiring harness and factory upfitter harness are designed to tie into the Ford upfitter switches.
Each Squadron 2.0 Sport pod is a square LED light pod with a 3.29 in height, 3.32 in depth, and 2.84 in length/width. Output is 3,200 raw lumens per pod, for 19,200 raw lumens total. Power draw is 30 watts and 2.2 amps per pod at 13.8V DC, or 180 watts and 13.2 amps total at 13.8V DC.
- Six Squadron 2.0 Sport LED pods: 2 wide cornering clear, 2 driving combo clear, 2 spot clear
- Integrated RGBW backlight with 9 user-selectable color options
- 5000K daylight color temperature
- IP69K ingress protection
- Standard 4-pin Deutsch connector
- Primary operating voltage: 12V-32V DC
- Backlight operating voltage: 11V-14V DC
- Updated second-generation Squadron 2.0 optics with reduced light spill
- Redesigned behind-the-grille steel brackets with increased vertical aiming adjustability
- uService design with clip-in reflectors and a redesigned gasket to prevent pinched O-rings
- MoistureBlock sealing, CopperDrive thermal management, and DirectSink thermal path technology
The kit arrives with the light pods, behind-the-grille brackets, a wiring harness, a factory upfitter wiring harness, and mounting hardware. A 9/16 in socket and wrench are required for pod-to-bracket installation on a 2021+ Ford Raptor.
Baja Designs lists a 30-day money-back satisfaction guarantee and a manufacturer limited lifetime warranty. It is not compatible with adaptive cruise control relocation kits.
This listing preserves the complete manufacturer fitment table for the vehicles named above. The manufacturer also identifies this kit as a LED light pod kit, behind-the-grille kit, with Squadron 2.0 Sport pods and clear lenses.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | Police Responder |
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
$314.94
Fits the 2024-2026 Ford Ranger Raptor.
This Baja Designs fog pocket kit replaces the factory fog light setup with a pair of S1 LED light pods built for the Ranger Raptor-specific mounting locations. It uses clear Wide Cornering lenses for short-range lighting and keeps the factory fog light switch function. The direct bolt-on design does not require drilling or cutting.
- Part number: 44-8358
- 2,320 raw lumens per LED pod
- 20W per LED pod
- 1.42A current draw per LED pod
- 5000K color temperature
- Clear lens color
- Wide Cornering beam pattern for lighting zones 1 and 2
- uService replaceable lenses and optics
- ClearView optimized beam pattern optics
- MoistureBlock housing design
- DirectSink thermal management
- Covered by U.S. Patent Number 11273751
- 30-Day Money Back Satisfaction Guarantee
- Limited Lifetime Warranty against manufacturer defects
The kit includes two S1 LED light pods with Clear Wide Cornering lenses, two Ranger Raptor-specific fog light mounting brackets, two plug-and-play wiring adapter harnesses with H11-style connectors, and the mounting hardware needed for installation. Baja Designs notes that no additional parts are required for a factory fog location install.
Installation is a mechanical and electrical swap at the front bumper fog pocket area. The instructions call for the vehicle to be in Park on level ground with the parking brake engaged, and the front wheels are removed for access. On the observed 2024-2026 Ford Ranger Raptor procedure, the disassembly used a T30 Torx socket/driver, a 10mm socket or wrench, and a T25 Torx socket/driver. Factory hardware is retained during removal and reused during reassembly. The harnesses plug directly into the factory connectors, and the light pod is positioned on the front bracket and aligned to the mounting slots before tightening.
This kit is made for the Ranger Raptor and uses Ranger Raptor-specific brackets, so it is not a universal fog light upgrade. The clear lens, short-range beam pattern, and plug-and-play wiring make it a clean factory-location replacement for drivers who want auxiliary lighting without changing the bumper or cutting the truck.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering.
$1,229.99
Give your Ford Raptor's fog lights the ultimate upgrade with the 2021+ Ford Raptor Triple Fog Kit. Designed to replace the OEM fog lights in the 2021+ Ford Raptor, the Triple Fog Kit includes the brackets, two D-Series SAE PRO lights, two D-Series Spot lights, two D-Series Drive lights, and hardware. RIGID's 2021+ Ford Raptor Triple Fog Kit provides a street-legal lighting solution for low-visibility conditions.
Installation InstructionsInstallation Instructions
- All Necessary Hardware Included
- Seamless OEM Fitment
- Fully Adjustable
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | F-150 | Raptor |
$135.99
This RIGID Dual Pod A-Pillar mount kit is designed specifically for the 2021 Bronco and allows for a clean install of RIGID's high output LED lighting. This A-Pillar mounting kit fits two of RIGID's 4 in. 360-Series, D-Series or Radiance Pods on each mount. Own The Night with RIGID's Dual Pod A-Pillar LED mount for your 2021 Ford Bronco . All of RIGID's grilles, OE Brackets, and Mounts are made with stainless steel and covered with UV and abrasion resistant powder coat to ensure years of use in the harshest conditions. Professional installation recommended.
Installation Instructions- UV And Abrasion Resistant Powder Coat
- Stainless Steel Construction
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | Bronco | Badlands |
| 2021-2023,2025-2026 | Ford | Bronco | Base |
| 2021-2026 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2026 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2026 | Ford | Bronco | Outer Banks |
| 2022-2026 | Ford | Bronco | Raptor |
| 2025-2026 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.