Welcome to RaptorsOnly.com
-
Brands
Shop by brand
- 3D MAXpider
- Access
- Addictive Desert Designs
- Advan
- AEM Induction
- aFe
- Air Lift
- Airaid
- Alcon
- AlphaRex
- AMP Research
- AMS
- Anderson Composites
- ANZO
- ARB
- Atturo Tire
- AutoMeter
- AVS
- AWE Tuning
- BackRack
- Baer Brakes
- Baja Designs
- BAK
- Banks Power
- BBK
- BBS
- BD Diesel
- Belltech
- Bestop
- BFGoodrich
- BMC
- Body Armor 4x4
- Borla
- Brembo
- Brembo OE
- Bully Dog
- Bushwacker
- Camburg
- Clevite
- COBB
- Cometic Gasket
- COMP Cams
- CORSA Performance
- Covercraft
- CSF
- DBA
- DeatschWerks
- DFC
- Diode Dynamics
- DS18
- DV8 Offroad
- Eaton
- EBC
- Eibach
- Enkei
- Extang
- Fabtech
- Fel-Pro
- fifteen52
- Firestone
- Flowmaster
- Ford Racing
- Forgestar
- FORM Lighting
- FOX
- Garrett
- Gates
- GEN-Y Hitch
- Go Fast Bits
- Go Rhino
- Gram Lights
- Granatelli Motor Sports
- GSC Power Division
- Hawk Performance
- Hella
- Hellwig
- Hotchkis
- Husky Liners
- ICON
- Injen
- J&L
- JBA
- JLT
- K&N Engineering
- KC HiLiTES
- King Engine Bearings
- King Shocks
- Kleinn Air Horns
- Kooks Headers
- KYB
- LIQUI MOLY
- LUND
- Magnaflow
- Mahle OE
- Maxtrac
- Mayhem
- MBRP
- McGard
- Method Wheels
- MGP
- Michelin
- Mickey Thompson
- Mishimoto
- Moog
- Motul
- MTX Wheels
- N-Fab
- Nacho Offroad Technology
- NGK
- Nitrous Express
- Odyssey Battery
- ORACLE Lighting
- PowerStop
- Putco
- QA1
- Raceline
- Radium Engineering
- Rally Armor
- Rampage
- Raxiom
- Retrax
- Rhino-Rack
- Ridetech
- Rigid Industries
- Rival 4x4
- RockJock
- Roll-N-Lock
- Roush
- Royal Purple
- SCT Performance
- Skyjacker
- Snow Performance
- SPC Performance
- SPOD
- Stainless Works
- Superlift
- Superpro
- Timbren
- Torque Solution
- TOYO
- Truxedo
- Tuff Country
- Turbosmart
- UMI Performance
- Undercover
- Volant
- Vossen
- Wagner Tuning
- WeatherTech
- Weld
- Westin
- Whiteline
- Wilwood
- Yokohama Tire
- Yukon Gear & Axle
- Zone Offroad
No brands found. Try another name or initial.
156 brands
View all brands -
F-150 Raptor
- F-150 Raptor
-
1st Gen (2010-2014)
-
2nd Gen (2017-2020)
-
3rd Gen (2021-Present)
-
Raptor R (2023-Present)
-
Bronco Raptor
- Bronco Raptor
-
Suspension
-
Lighting
-
Bumpers & Armor
-
Racks
-
Interior Accessories
-
Exterior Accessories
-
Performance
-
Wheels & Tires
-
Brakes
-
Drivetrain
-
Engine & Cooling
-
Ranger Raptor
- Ranger Raptor
-
Suspension
-
Lighting
-
Bumpers & Armor
-
Racks
-
Interior Accessories
-
Exterior Accessories
-
Performance
-
Wheels & Tires
-
Brakes
-
Drivetrain
-
Engine & Cooling
Your cart
Subheading
Product comparison
Describe you product comparison grid
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
30 products
30 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$330.99
This new ORACLE Halo Kit features ORACLE SMD Halos that are resin injected resulting in an IP67 waterproof rating. These new SMD Halos are installed directly to the outside of the vehicle's headlight lens making installation easy even for a novice! The halo kit is 12V powered and can be wired to a controller, switch, or parking light wiring harness. Warranty lifetime period covers the LED and driver components. Hard part decay due to UV damage, oxidation, or environmental conditions are not covered under this stated period.
- Features: Turn your lights on and off, select from millions of color variations, control patterns, brightness, strobe function, and even control the lights with music
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2009-2012 | Dodge | Challenger | R/T |
| 2012 | Dodge | Challenger | R/T Classic |
| 2009-2011 | Dodge | Challenger | SE |
| 2008-2012 | Dodge | Challenger | SRT8 |
$700.95
Fits the 2021-2026 Ford F-150 Raptor.
The Baja Designs S2 SAE Dual Fog Pocket Light Kit replaces the factory bumper fog lights with direct-fit auxiliary LED pods built for fog, dust, and other low-visibility conditions. It is a bolt-on fog pocket replacement for the Raptor bumper and is designed to meet SAE J583 fog lamp requirements.
This kit uses amber S2 SAE lights with controlled fog beam pattern and sharp cutoff. Baja Designs lists the package as four S2 SAE amber spot LED lights, with aspheric projector optics and advanced LED technology. The kit is intended to install without additional parts or bumper modifications.
- Manufacturer part number: 448171
- Four S2 SAE amber spot LED lights
- Eight mounting brackets
- Two adapter harnesses
- All necessary installation hardware
- 1,210 lumens per light pod
- 5,712 candela per light pod
- 12.42 watts per light pod
- Amber lens color
- Designed to meet SAE J583 fog lamp requirements
Installation is direct bolt-on at the factory fog pocket location. No extra bumper modifications are required. Tool sizes and step-by-step access can vary by vehicle generation, so use the correct hand tools for the truck you are working on and follow Baja Designs' installation instructions for that application.
The kit arrives with the lights, brackets, adapter harnesses, and installation hardware. Baja Designs backs the product with a limited lifetime warranty and a 30-day satisfaction guarantee. For service, this SAE product does not use uService-style user-replaceable lenses or optics; opening or tampering with the housing voids the warranty and factory repair service is required.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
$690.95
Fits 2021-2026 Ford F-150 Raptor.
The Baja Designs S2 SAE Dual Fog Pocket Light Kit replaces the factory fog lights in the Raptor’s OEM fog pockets with four auxiliary LED light pods. It is a direct bolt-on setup that uses plug-and-play adapter harnesses to connect to the factory wiring, so no cutting or permanent vehicle modification is required.
This kit is built around SAE J583 fog lamp compliance and controlled fog beam optics with a sharp top cutoff. The result is a focused auxiliary fog pattern designed for dust, fog, rain, and other poor-weather driving conditions without throwing glare back at oncoming traffic. Baja Designs notes that the SAE line uses sealed light pods, so the uService user-serviceable optics/lens feature is not available here; opening or tampering with the housing voids the warranty.
- Manufacturer part number: 448166
- (4) S2 SAE clear LED light pods
- (8) light pod mounting brackets
- (2) plug-and-play adapter wiring harnesses
- All necessary mounting hardware
- Aluminum housing with black finish
- Clear lens and white light output
- Rectangular pod design
- 1.8 in. height x 2.9 in. width per pod
- 1,210 lumens per pod; 4,840 lumens total
- 5,712 candela per pod
- 12.42 watts per pod
- 2 LEDs per pod, 8 LEDs total
- Aspheric projector optics
- Limited Lifetime Warranty
- 30-Day Satisfaction Guarantee
Installation is straightforward for a novice-level job, but it still pays to test-fit the brackets, route the harnesses cleanly, and verify the lights function correctly before buttoning everything up. No special tool sizes or torque specs were provided by the manufacturer for this part number, so those details should be confirmed during installation as needed. The kit arrives complete and is intended to be a turn-key replacement for the factory fog lights.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
$756.95
Fits 2010-2014 Ford F-150 SVT Raptor.
Baja Designs Squadron Sport “Sportsmen” Dual Fog Pocket Light Kit, part number 447847, replaces the factory bumper fog light pockets with a dual pod mount for the 1st-gen Ford F-150 SVT Raptor. It is built to hold two Squadron Sport LED lights per side for a total of four pods, and it wires into the factory upfitter switch setup with the included harnesses.
This kit is built around clear Squadron Sport pods with a mix of beam patterns for distance and forward coverage. The included spot pods use a 9-degree beam, while the driving combo pods combine 42-degree driving optics with 9-degree spot optics. Baja Designs lists 3,162 raw lumens per pod, 12,648 raw lumens total, 30.36 watts per pod, 2.2 amps per pod, and a 5000K daylight color temperature.
- Fits the OEM front bumper fog light pockets on the 2010-2014 Ford F-150 SVT Raptor
- Part number: 447847
- (2) Squadron Sport Spot Clear LED light pods
- (2) Squadron Sport Driving Combo Clear LED light pods
- (2) front bumper fog pocket mounting brackets
- (2) upfitter wiring harnesses, part number 640093
- (2) 55-inch splitter wiring harnesses, part number 613606
- All necessary mounting hardware
- Clear lens color
- uService technology for replaceable lenses and optics
- MoistureBlock housing protection
- DirectSink thermal design
- ClearView optics
Installation is direct to the factory fog pocket area. The kit uses the supplied brackets and hardware, and it includes the harnesses needed to connect to factory upfitter switches. No special tool list or torque specification was provided by the manufacturer, so plan on standard hand tools and following the Baja Designs installation sheet for your truck. The lights, brackets, and wiring components should arrive as a complete kit ready for installation.
Baja Designs lists a 30-day money back guarantee and a limited lifetime warranty.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | FX2 |
| 2010-2014 | Ford | F-150 | FX4 |
| 2010-2012 | Ford | F-150 | Harley-Davidson Edition |
| 2010-2014 | Ford | F-150 | King Ranch |
| 2010-2014 | Ford | F-150 | Lariat |
| 2011 | Ford | F-150 | Lariat Limited |
| 2013-2014 | Ford | F-150 | Limited |
| 2010-2014 | Ford | F-150 | Platinum |
| 2010-2014 | Ford | F-150 | STX |
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2010-2014 | Ford | F-150 | XL |
| 2010-2014 | Ford | F-150 | XLT |
$1,050.95
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | King Ranch |
| 2017-2020 | Ford | F-150 | Lariat |
| 2017-2020 | Ford | F-150 | Limited |
| 2017-2020 | Ford | F-150 | Platinum |
| 2018-2020 | Ford | F-150 | Police Responder |
| 2017-2020 | Ford | F-150 | Raptor |
| 2017-2020 | Ford | F-150 | SSV |
| 2017-2020 | Ford | F-150 | XL |
| 2017-2020 | Ford | F-150 | XLT |
$464.95
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2020 | Ford | F-150 | King Ranch |
| 2015-2020 | Ford | F-150 | Lariat |
| 2016-2020 | Ford | F-150 | Limited |
| 2015-2020 | Ford | F-150 | Platinum |
| 2018-2020 | Ford | F-150 | Police Responder |
| 2017-2020 | Ford | F-150 | Raptor |
| 2016-2020 | Ford | F-150 | SSV |
| 2015-2020 | Ford | F-150 | XL |
| 2015-2020 | Ford | F-150 | XLT |
| 2017-2022 | Ford | F-250 Super Duty | King Ranch |
| 2017-2022 | Ford | F-250 Super Duty | Lariat |
| 2018-2022 | Ford | F-250 Super Duty | Limited |
| 2017-2022 | Ford | F-250 Super Duty | Platinum |
| 2017-2022 | Ford | F-250 Super Duty | XL |
| 2017-2022 | Ford | F-250 Super Duty | XLT |
| 2017-2022 | Ford | F-350 Super Duty | King Ranch |
| 2017-2022 | Ford | F-350 Super Duty | Lariat |
| 2018-2022 | Ford | F-350 Super Duty | Limited |
| 2017-2022 | Ford | F-350 Super Duty | Platinum |
| 2017-2022 | Ford | F-350 Super Duty | XL |
| 2017-2022 | Ford | F-350 Super Duty | XLT |
$599.99
The NACHO Plug N Play Kit is exactly that. This kit comes with everything needed to swap out your stock fog lights in your single piece plastic bumper and bring style and more usable output to your fog lights. The kit consists of 2 Quatro SAE Amber lens lights, 2 mounting brackets, oem connectors for the lights to plug directly into the factory fog light plug. This makes for a quick and easy swap while maintaining the factory switching and the piece of mind. The Quatro SAE is still equipped with our TRL or Trail Running Light and includes a light connector and fuse tap harness to power the TRL to your auxiliary power. Increase performance, visibility, and style. Bronco's are not meant to be tamed.
- Everything included to install
- Vehicle Specific Wire Lengths
- Powder Coated Steel Brackets
- No Cutting or Trimming
- Factory Plugs
- Easy Install
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | Bronco | Badlands |
| 2021-2023,2025-2026 | Ford | Bronco | Base |
| 2021-2026 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2026 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2026 | Ford | Bronco | Outer Banks |
| 2022-2026 | Ford | Bronco | Raptor |
| 2025-2026 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
$599.99
The NACHO Plug N Play Kit is exactly that. This kit comes with everything needed to swap out your stock fog lights in your single piece plastic bumper and bring style and more usable output to your fog lights. The kit consists of 2 Quatro SAE Amber lens lights, 2 mounting brackets, oem connectors for the lights to plug directly into the factory fog light plug. This makes for a quick and easy swap while maintaining the factory switching and the piece of mind. The Quatro SAE is still equipped with our TRL or Trail Running Light and includes a light connector and fuse tap harness to power the TRL to your auxiliary power. Increase performance, visibility, and style. Bronco's are not meant to be tamed.
- Everything included to install
- Vehicle Specific Wire Lengths
- Powder Coated Steel Brackets
- No Cutting or Trimming
- Factory Plugs
- Easy Install
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | Bronco | Badlands |
| 2021-2023,2025-2026 | Ford | Bronco | Base |
| 2021-2026 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2026 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2026 | Ford | Bronco | Outer Banks |
| 2022-2026 | Ford | Bronco | Raptor |
| 2025-2026 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
$319.95
Fits the 2024-2026 Ford Ranger Raptor front bumper fog light pockets.
This Baja Designs S1 Fog Pocket Light Kit replaces the factory fog light pockets with a pair of S1 LED light pods in Baja Amber and a wide cornering pattern. It is built for low-visibility use in fog, dust, rain, and snow, and it keeps the OEM fog light switch function through the factory wiring.
- MPN: 448359
- Includes two S1 wide cornering LED light pods with Baja Amber lenses
- Includes vehicle-specific front and rear fog light bracket sets
- Includes plug-and-play adapter harnesses
- Includes mounting hardware and zip ties for harness retention
- 2,320 raw lumens per pod
- 20 watts / 1.42 amps per pod
- 5000K color temperature
- Hard-coated polycarbonate lens
- IP69K waterproof, rainproof, and submersible rating
- uService replaceable lenses and optics system
- ClearView optical reflector layout
- MoistureBlock O-ring seal system
- DirectSink thermal path heat dissipation
Installation is a true drop-in fit with no drilling or cutting of the vehicle bodywork. On the 2024-2026 Ranger Raptor, Baja Designs recommends parking on level ground with the parking brake engaged and removing the front wheel for access. The documented install uses a T30 Torx bit/driver, T25 Torx bit/driver, 3mm Allen bit, 10mm wrench or socket, 7mm wrench or socket, and a Phillips screwdriver or clip removal tool. Factory hardware removed during disassembly is retained and reused.
The install sequence on the Ranger Raptor includes removing the plastic air vent, loosening the inner fender liner, unplugging the factory fog light connector, removing the OEM fog light housing, aligning the S1 pod to the front bracket, securing the rear bracket with 3mm hardware, twisting the assembly into the fog pocket, and connecting the plug-and-play harness. Do not overtighten the self-tapping hardware.
It arrives as a complete lighting kit ready for a vehicle-specific pocket installation. Baja Designs lists a 30-day satisfaction guarantee and a limited lifetime warranty covering manufacturer defects. California Proposition 65 warning for cancer and reproductive harm applies.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering.
$1,564.95
Baja Designs LED fog pocket replacement kit for the Ford F-150 Raptor. It replaces the factory fog lights in the front bumper fog pockets with a vehicle-specific, direct-fit lighting package that uses six total pods: two Squadron 2.0 Pro Clear Spot, two Squadron 2.0 Pro Clear Driving Combo, and two S1 Clear Wide Cornering.
This kit is built around Baja Designs' uService design, so the lenses and optics are replaceable. It also uses MoistureBlock sealing, ClearView optics, and DirectSink thermal management. The light output is 28,324 raw lumens across all six pods, with a 5000K daylight color temperature. The Squadron 2.0 Pro pods use a standard 4-pin Deutsch-style connector and include a user-selectable RGBW backlight with nine color options: red, green, blue, magenta, cyan, amber, yellow, pink, and white.
The housings are black powder-coated aluminum with hard-coated clear polycarbonate lenses, billet machined aluminum bezels, and stainless steel mounting brackets and fasteners. The system is rated IP69K, is IK10 compliant, includes built-in overvoltage protection, and is compatible with 12V-36V DC systems. Baja Designs lists a 49,930-hour LED service life expectancy.
Fits: 2021-2026 Ford F-150 King Ranch, Lariat, Platinum, Police Responder, Raptor, SSV, Tremor, XL, and XLT; 2021-2023 Ford F-150 Limited; 2024-2026 Ford F-150 STX.
- Part number: 440020
- Direct-fit fog pocket replacement kit for the front bumper
- Includes six light pods total: four Squadron 2.0 Pro and two S1
- Vehicle-specific steel fog pocket mounting brackets
- Wiring adapter harnesses for plug-and-play operation with the factory fog light switch
- 1 two-light splitter harness, 2 x 55-inch splitter harnesses, and 1 upfitter wiring harness
- Complete stainless steel mounting hardware kit
- On a 2021+ Ford F-150 Raptor, installation uses trim removal tools and common hand tools including 4mm and 5mm hex keys, 7mm, 8mm, 10mm, and 12mm sockets, 7/16-in and 9/16-in sockets and wrenches, and a T40 Torx socket
- Lightly snug the hardware before final alignment so the pods can be centered in the bumper opening
- If the truck did not come with factory OEM fog lights, the Ford OEM Raptor Gen 3 Fog Pocket fastener kit may be required
The backlight add-on harness uses the included 5-amp fuse in the fuse tap, and cycling the switch on and off changes the backlight colors. The kit is made in the USA in San Marcos, CA.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | Police Responder |
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
$1,222.95
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | Police Responder |
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
Manufacturer part number: 440019
$1,184.95
Fits 2021-2026 Ford F-150 Raptor.
This Baja Designs fog pocket kit replaces the factory fog lights with six LED light pods mounted in the bumper fog openings. It uses clear lens optics and combines Squadron Sport 2.0 and S1 lights to add forward reach and wider foreground coverage without cutting into the bumper.
The kit is built around a powder-coated black aluminum housing with a hard-coated polycarbonate clear lens, billet machined aluminum bezel, stainless steel hardware, and bracket mounts. It uses a standard 4-pin Deutsch connector, built-in overvoltage protection, DirectSink / CopperDrive direct thermal path technology, and uService field-serviceable construction with clip-in reflectors. Baja Designs lists IP69K protection, IK10 compliance, 49,930-hour expected LED lifespan, and USA manufacture in San Marcos, CA.
- Part number: 440018
- Light configuration: 2x S1 LED lights - clear wide cornering, 2x Squadron 2.0 Sport LED lights - clear driving combo, 2x Squadron 2.0 Sport LED lights - clear spot
- Included hardware: 2 vehicle-specific fog pocket mounting brackets, 2 adaptor harnesses, 1 two-light splitter harness, 2 55-inch splitter harnesses, 1 upfitter switch wiring harness, mounting hardware set
- Factory parts reused: factory bumper mounting fasteners
- Output and draw: Squadron 2.0 Sport - 3,200 raw lumens and 30 watts/2.2 amps per light; S1 - 2,320 raw lumens and 20 watts/1.42 amps per light; total output 17,440 raw lumens
- Light characteristics: clear lens, 5000K daylight natural color, RGBW backlight with 9 user-selectable colors
- Optics: Spot, Driving Combo, and Wide Cornering patterns for long-range, mid-range, and corner coverage
- Fitment note: if the vehicle was not equipped with factory fog lights, the Gen 3 Raptor fog pocket fastener kit may be required
Installation follows the factory fog pocket area and uses the supplied brackets and harnesses. Baja Designs calls for removal of the splash guard bolts, bumper support fastener, and top fog bracket bolts, then connection of the supplied harnesses and wiring to the upfitter circuit. Fasteners are left hand-tight during alignment, then re-torqued after 100 miles. The guide also notes the battery should be disconnected during wiring, and the factory bumper mounting fasteners are reused. Installation tools referenced by Baja Designs for the 2021-on Ford F-150 Raptor include a trim removal tool or flathead screwdriver, 4mm and 5mm hex keys, 7mm, 8mm, 10mm, 12mm, 7/16 in., 9/16 in. sockets, a T40 Torx socket/bit, 7/16 in. and 9/16 in. wrenches, a multimeter or test light, scissors, and pliers.
The mounting bracket provides vertical alignment adjustment in the fog pocket, which helps center the light pods in the bumper opening. If you are adding the kit to a truck that did not come with factory fog lights, confirm whether the Gen 3 Raptor fog pocket fastener kit is needed before starting the install.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | Police Responder |
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
$314.94
Fits the 2024-2026 Ford Ranger Raptor.
This Baja Designs fog pocket kit replaces the factory fog light setup with a pair of S1 LED light pods built for the Ranger Raptor-specific mounting locations. It uses clear Wide Cornering lenses for short-range lighting and keeps the factory fog light switch function. The direct bolt-on design does not require drilling or cutting.
- Part number: 44-8358
- 2,320 raw lumens per LED pod
- 20W per LED pod
- 1.42A current draw per LED pod
- 5000K color temperature
- Clear lens color
- Wide Cornering beam pattern for lighting zones 1 and 2
- uService replaceable lenses and optics
- ClearView optimized beam pattern optics
- MoistureBlock housing design
- DirectSink thermal management
- Covered by U.S. Patent Number 11273751
- 30-Day Money Back Satisfaction Guarantee
- Limited Lifetime Warranty against manufacturer defects
The kit includes two S1 LED light pods with Clear Wide Cornering lenses, two Ranger Raptor-specific fog light mounting brackets, two plug-and-play wiring adapter harnesses with H11-style connectors, and the mounting hardware needed for installation. Baja Designs notes that no additional parts are required for a factory fog location install.
Installation is a mechanical and electrical swap at the front bumper fog pocket area. The instructions call for the vehicle to be in Park on level ground with the parking brake engaged, and the front wheels are removed for access. On the observed 2024-2026 Ford Ranger Raptor procedure, the disassembly used a T30 Torx socket/driver, a 10mm socket or wrench, and a T25 Torx socket/driver. Factory hardware is retained during removal and reused during reassembly. The harnesses plug directly into the factory connectors, and the light pod is positioned on the front bracket and aligned to the mounting slots before tightening.
This kit is made for the Ranger Raptor and uses Ranger Raptor-specific brackets, so it is not a universal fog light upgrade. The clear lens, short-range beam pattern, and plug-and-play wiring make it a clean factory-location replacement for drivers who want auxiliary lighting without changing the bumper or cutting the truck.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering.
$735.95
Baja Designs S2 SAE Pro Fog Pocket Light Kit is a vehicle-specific auxiliary lighting setup for the front bumper fog light pockets on the listed Raptor and Bronco Raptor applications. It combines SAE fog output for on-road visibility with S2 Pro driving combo pods for added forward light when you need more reach off pavement.
Fits 2023-2026 Ford Bronco Raptor and 2021-2026 Ford F-150 Raptor.
This kit is built around four rectangular LED light pods, custom mounting brackets, vehicle-specific harness adapters, black rock guards with printed Baja Designs logos, and a complete mounting hardware kit. The S2 SAE pods use Baja Amber SAE fog optics with aspheric projector optics and the S2 Pro pods use clear driving combo optics. Baja Designs lists stainless steel mounting hardware, and the pod housings are black powder-coated cast aluminum.
- Manufacturer part number: 448183
- 2 S2 SAE light pods with Baja Amber SAE fog lens
- 2 S2 Pro light pods with clear driving combo lens
- 4 wiring harness adapters
- 4 black rock guards with printed Baja Designs logo
- Custom vehicle mounting brackets
- Complete mounting hardware kit
- S2 SAE: 1,210 raw lumens and 12.42W per light
- S2 Pro: 2,245 raw lumens and 23.4W per light
- SAE fog pod output meets SAE J583 standards
- uService is not a feature of the S2 SAE lights; opening the housing voids the manufacturer warranty
- Limited Lifetime Warranty and 30-day satisfaction guarantee, valid only if returned to the manufacturer for repair
- California Proposition 65 warning for Cancer and Reproductive Harm
Installation is designed to mount into the OEM front bumper fog light pocket openings and uses the included vehicle-specific harness adapters for plug-and-play wiring. No additional wiring parts are required. The kit is meant to bolt into the factory fog pocket openings and is supplied with the brackets and hardware needed for installation.
The kit arrives as a complete lighting package with the pods, brackets, adapters, rock guards, and hardware included in the box. If you are comparing trim levels, note that the fitment is specific to the Ford Bronco Raptor and Ford F-150 Raptor applications listed above.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2026 | Ford | Bronco | Raptor |
| 2021-2026 | Ford | F-150 | Raptor |
$735.95
Fits the 2023-2026 Ford Bronco Raptor and 2021-2026 Ford F-150 Raptor.
This Baja Designs fog pocket light kit replaces the factory bumper fog lights with a dual-pod setup on each side. It combines S2 SAE fog lights for poor-weather use with S2 Pro driving/combo lights for added forward lighting, while keeping the install tied to the factory bumper pockets.
The kit uses black hard-anodized aluminum housings, clear Lexan polycarbonate lenses, and Baja Designs' ClearView optics, MoistureBlock sealing, and CopperDrive LED management. The S2 SAE pods use aspheric projector optics and are SAE J583 fog lamp compliant. The S2 Pro pods use a clear driving/combo beam pattern. The system is rated IP69K for water, dust, and submersible protection.
- Part number: 448182
- 4 LED pods total: 2 S2 SAE clear LED fog lights and 2 S2 Pro clear driving/combo LED lights
- 4 wiring harness adapters
- 4 black rock guards with Baja Designs logo
- Mounting brackets, mounting hardware, and installation sheet
- S2 SAE output: 1,210 raw lumens per pod; 12.42 watts per pod; 5,712 candela per pod
- S2 Pro output: 2,245 raw lumens per pod; 23.4 watts per pod
- Total output: 6,910 raw lumens
- Total system power draw: 71.64 watts
- Color temperature: 5000K daylight
- Pod dimensions: 1.8 in. x 2.9 in.
- Limited lifetime warranty and 30-day satisfaction money-back guarantee
Installation is direct bolt-on with the included plug-and-play harness adapters, so no splicing is required. Baja Designs notes novice-level installation. Vehicle-specific tool sizes and torque values are not specified in the part-level documentation, so follow the supplied installation sheet and the vehicle service information for your Raptor application.
Keep in mind that the SAE series pods do not use the uService replaceable lens/optics feature, and opening or tampering with the S2 SAE pods voids the manufacturer warranty. The kit arrives with the lights, adapters, rock guards, brackets, hardware, and instructions needed to mount it in the factory bumper fog pocket location.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2026 | Ford | Bronco | Raptor |
| 2021-2026 | Ford | F-150 | Raptor |
$649.95
Baja Designs S2 SAE/S2 Sport Fog Pocket Light Kit 448181 is a direct-fit auxiliary LED fog light replacement for the factory bumper fog light pockets. It combines two SAE-compliant amber fog pods with two clear S2 Sport driving-combo pods, giving you a matched plug-and-play setup that mounts in the OEM locations without additional trim modification.
This kit is built around rectangular aluminum light pods with a black housing finish. The S2 SAE pods use aspheric projector optics and meet SAE J583 fog lamp requirements for road-legal use. The S2 Sport pods provide a clear driving combo pattern for added forward light output. All installation hardware, vehicle-specific mounting brackets, wiring harness adapters, and a wiring harness with relay are included.
Fitment is specific to the following vehicles:
- 2023-2026 Ford Bronco Raptor
- 2021-2026 Ford F-150 Raptor
In the box you get two S2 SAE pods with Baja Amber fog pattern, two S2 Sport pods with clear driving combo pattern, four wiring harness adapters, four black rock guards with the Baja Designs logo, vehicle-specific mounting brackets, all necessary mounting hardware, and the wiring harness with relay. The kit is designed to install into the existing factory bumper fog pockets and does not require additional trim changes or extra parts.
- Manufacturer part number: 448181
- Light source: LED
- Pod form factor: rectangular
- Pod dimensions: 1.8 in x 2.9 in
- Housing material: aluminum
- Housing finish: black
- S2 SAE output: 1,210 lumens per light
- S2 SAE peak beam intensity: 5,712 candela
- S2 SAE power draw: 12.42 W per light
- S2 Sport output: 1,581 raw lumens per light
- S2 Sport power draw: 12 W per light
- Satisfaction guarantee: 30-day money-back guarantee
- Warranty: limited lifetime warranty
- uService replaceable lens functionality is not available on SAE series products
- Opening or tampering with SAE light pod housings voids the limited lifetime warranty
For the Bronco Raptor and F-150 Raptor, this kit is a clean factory-pocket solution when you want the amber SAE fog beam and the clear driving beam in one package. The included adapters and relay help keep the install straightforward, and the black rock guards protect the lenses when the lights are not in use.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2026 | Ford | Bronco | Raptor |
| 2021-2026 | Ford | F-150 | Raptor |
$910.95
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
Manufacturer part number: 448053
$1,166.95
Baja Designs Amber SAE Fog Pocket Kit with Upfitter Harness replaces the factory fog light assemblies in the Bronco’s fog pockets and adds a mixed beam setup for street-use fog lighting plus auxiliary off-road illumination. It is a direct bolt-on kit for the factory fog pocket locations and is built for the factory Ford Modular Steel Bumper. It does not fit base/plastic bumpers.
This kit is designed around the factory fog openings and connects to Ford OEM factory upfitter switches. No cutting or drilling is required for installation. The kit arrives as a complete package with the light pods, fog light facia mount brackets, wiring pieces, and mounting hardware needed for the swap.
- Manufacturer part number: 447762UP
- (2) Squadron SAE LED light pods with amber lenses
- (2) S2 Sport LED light pods with spot pattern and clear lenses
- (2) S2 Sport LED light pods with driving/combo pattern and clear lenses
- (2) fog light facia mount brackets, left and right
- (2) upfitter wiring harnesses, part #640093
- (2) 55-inch splitter harnesses, part #613606
- (2) splitter harnesses, part #613607
- All necessary mounting hardware and parts bags
The Squadron SAE pods use amber lenses, aspheric projector optics, and SAE fog lamp-compliant output for on-road use. The S2 Sport pods use clear lenses and are part of the same mixed lighting package. Baja Designs lists LED lighting with CopperDrive and ClearView technology, plus MoistureBlock construction, overvoltage protection, and replaceable lenses and optics on the S2 Sport pods.
Construction details called out by the manufacturer and retailer listings include black housings, billet machined aluminum bezels, hard-coated polycarbonate lenses, and stainless steel mounting hardware. Published specifications for the included light pods list 2,420 lumens and 15,800 candela per Squadron SAE pod at 29 watts, and 1,581 lumens and 12.4 watts per S2 Sport pod, with 0.90 amp draw per S2 Sport pod. The color temperature is listed at 5000K daylight.
Other published specs include IP69K certification, IK10 compliance, and a 49,930-hour life expectancy. Retail listings also describe the kit as water resistant, rain proof, and submersible, with the Squadron SAE pods meeting SAE J583 fog lamp requirements. Country of origin is listed as made in the USA, San Marcos, CA.
Fitment: 2021-2026 Ford Bronco Badlands; 2021-2023 Ford Bronco Base; 2025-2026 Ford Bronco Base; 2021-2026 Ford Bronco Big Bend; 2021-2024 Ford Bronco Black Diamond; 2022-2024 Ford Bronco Everglades; 2021 Ford Bronco First Edition; 2023-2026 Ford Bronco Heritage Edition; 2023-2024 Ford Bronco Heritage Limited Edition; 2021-2026 Ford Bronco Outer Banks; 2022-2026 Ford Bronco Raptor; 2025-2026 Ford Bronco Stroppe Edition; 2021-2024 Ford Bronco Wildtrak.
The Bronco application uses the factory fog pocket openings, so installation follows the bumper’s molded pocket layout rather than a universal bracket fit. Because the harness is designed to plug into the factory upfitter switches, it is a cleaner install than running a separate switch panel or ad hoc relay setup.
For the actual install, plan on normal hand tools for bumper and pocket access, plus the factory upfitter switch connections. Reuse is not specified beyond the vehicle’s factory mounting locations, and the kit is intended to replace the OEM fog light assemblies at those openings.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | Bronco | Badlands |
| 2021-2023,2025-2026 | Ford | Bronco | Base |
| 2021-2026 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2026 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2026 | Ford | Bronco | Outer Banks |
| 2022-2026 | Ford | Bronco | Raptor |
| 2025-2026 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
$1,171.95
Baja Designs Amber SAE Fog Pocket Kit for 2021-2026 Ford Bronco Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage Edition, Heritage Limited Edition, Outer Banks, Raptor, Stroppe Edition, and Wildtrak.
This fog pocket kit replaces the factory front bumper fog light pockets on the Ford Bronco and adds a six-pod LED setup with three lights per side pocket. It is designed for factory steel bumpers and is a bolt-in replacement with no cutting or trimming required.
- Manufacturer part number: 447762
- Amber SAE fog lights
- Squadron SAE pods: 2,420 lumens per light, 15,800 candela per light, 29 watts per light
- Squadron SAE optics: aspheric projector optics
- S2 Sport pods: 1,581 lumens per light pod, 12.42 watts per light pod, 0.90 amps per light pod
- S2 Sport beam patterns included: 2 spot pods and 2 driving combo / wide cornering pods
- Light output color temperature: 5000K daylight
- Housing: powder-coated cast aluminum, black
- Bezel: powder-coated billet machined aluminum
- Lens: hardcoated polycarbonate
- Hardware: stainless steel mounting hardware and bracketry
- IP69K certified, IK10 compliant, and exceeds MIL-STD-810G military spec testing
- DirectSink thermal path technology, CopperDrive technology, and built-in overvoltage protection
- LED life expectancy: 49,930 hours
- Made in the USA, San Marcos, CA
The kit includes two Squadron SAE amber spot LED fog light pods, two S2 Sport spot LED light pods, two S2 Sport driving combo LED light pods, left and right side steel bumper fog light facia pocket mounting brackets, two wiring harnesses, two 55-inch splitter harnesses, two splitter harnesses, and complete mounting hardware and parts bags.
For this part number, the kit uses the 640117 toggle harness. A separate 447762 version is listed with the 640093 upfitter harness.
Baja Designs notes that uService replaceable lenses and optics do not apply to SAE products, and tampering with or disassembling the SAE light pods voids the warranty. This kit is intended for Bronco models equipped with the factory Heavy Duty Modular Steel Front Bumper and does not fit standard factory plastic front bumpers. The source also does not list Ford Bronco Sport fitment.
This listing carries the California Prop 65 warning for Cancer and Reproductive Harm.
Fits: 2021-2026 Ford Bronco Badlands; 2021-2023 Ford Bronco Base; 2025-2026 Ford Bronco Base; 2021-2026 Ford Bronco Big Bend; 2021-2024 Ford Bronco Black Diamond; 2022-2024 Ford Bronco Everglades; 2021 Ford Bronco First Edition; 2023-2026 Ford Bronco Heritage Edition; 2023-2024 Ford Bronco Heritage Limited Edition; 2021-2026 Ford Bronco Outer Banks; 2022-2026 Ford Bronco Raptor; 2025-2026 Ford Bronco Stroppe Edition; 2021-2024 Ford Bronco Wildtrak.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | Bronco | Badlands |
| 2021-2023,2025-2026 | Ford | Bronco | Base |
| 2021-2026 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2026 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2026 | Ford | Bronco | Outer Banks |
| 2022-2026 | Ford | Bronco | Raptor |
| 2025-2026 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
$1,166.95
Baja Designs Clear SAE Fog Pocket Kit with Upfitter for the 2021-2026 Ford Bronco Badlands, 2021-2023 Ford Bronco Base, 2025-2026 Ford Bronco Base, 2021-2026 Ford Bronco Big Bend, 2021-2024 Ford Bronco Black Diamond, 2022-2024 Ford Bronco Everglades, 2021 Ford Bronco First Edition, 2023-2026 Ford Bronco Heritage Edition, 2023-2024 Ford Bronco Heritage Limited Edition, 2021-2026 Ford Bronco Outer Banks, 2022-2026 Ford Bronco Raptor, 2025-2026 Ford Bronco Stroppe Edition, and 2021-2024 Ford Bronco Wildtrak.
This kit fills the Bronco's front fog light pockets with LED pods and the matching brackets and harnesses needed to tie into the factory upfitter switch system. It is built around Baja Designs SAE-compliant fog lighting, and the package is aimed at Bronco owners who want a clean pocket-mounted fog setup rather than a universal pod mount.
- Manufacturer part number: 447761UP
- Clear SAE fog pocket kit with upfitter wiring
- Includes Squadron SAE, S2 Sport Spot, and S2 Sport Driving Combo LED pods
- Comes with left and right fog light fascia mounting brackets
- Includes upfitter wiring harnesses, 55 in. splitter harnesses, splitter harnesses, and mounting hardware
- 58.8 W total power draw
- 4.00 A total amperage draw
- 6,324 raw lumens total
- 29 W per Squadron SAE light pod
- 2,420 lumens per Squadron SAE light pod
- Up to 15,800 candela per Squadron SAE light pod
- 5000K daylight color temperature
- 1.8 in. x 2.9 in. pod form factor
- Hard-coated clear polycarbonate lens
- Cast aluminum housing with black powder coat finish
- Billet machined aluminum bezel
- Stainless steel mounting brackets and hardware
- IP69K certified and IK10 compliant
- DirectSink direct thermal path technology
- CopperDrive 100% LED drive management
- Built-in overvoltage protection
- Made in USA, San Marcos, CA
The manufacturer states this kit is sold as a complete, self-contained package with no additional parts required. Installation uses the included brackets, harnesses, and hardware, and it is intended for vehicles with factory Ford upfitter switch provisions or a compatible auxiliary power switch system such as sPOD. Vehicles without upfitter provisions require the alternate toggle-switch kit, and the hardware should be installed on the correct Bronco bumper configuration before wiring is finalized.
Field service details matter with these pods. Baja Designs notes that uService replaceable lenses and optics are available on the S2 Sport pods, but not on the Squadron SAE pods. The SAE pods should not be disassembled; tampering voids the manufacturer warranty and SAE service requires returning the pod to Baja Designs.
The kit is intended for Bronco models equipped with the OEM Modular Steel Bumper. It does not fit standard factory plastic bumpers or aftermarket front bumpers. The fitment list above reflects the exact trims and year spans provided by the manufacturer.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | Bronco | Badlands |
| 2021-2023,2025-2026 | Ford | Bronco | Base |
| 2021-2026 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2026 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2026 | Ford | Bronco | Outer Banks |
| 2022-2026 | Ford | Bronco | Raptor |
| 2025-2026 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
$495.95
Baja Designs amber fog lights for the Ford F-150 and Ford Super Duty applications listed below. These lights are built to replace the factory fog-light location and give the front end a dedicated amber fog beam for low-visibility conditions.
Fitment summary: 2015-2020 Ford F-150 King Ranch, Lariat, Platinum, XL, and XLT; 2016-2020 Ford F-150 Limited and SSV; 2017-2020 Ford F-150 Raptor; 2018-2020 Ford F-150 Police Responder; 2017-2022 Ford F-250 Super Duty King Ranch, Lariat, Platinum, XL, and XLT; 2018-2022 Ford F-250 Super Duty Limited; 2017-2022 Ford F-350 Super Duty King Ranch, Lariat, Platinum, XL, and XLT; 2018-2022 Ford F-350 Super Duty Limited.
- Amber fog light application
- Baja Designs part number: 447718
- Fits the factory fog-light position on the listed Ford trucks
- Vehicle-specific fitment varies by model, year, and trim; keep the correct factory mounting hardware and follow the vehicle-specific install procedure
- Complete fitment table is included below for exact trim coverage
Installation typically uses the factory mounting points and requires access to the front bumper area. On a fog-light retrofit like this, it is important to confirm alignment after installation so the beam sits correctly in the bumper opening. If your truck already has factory fog lights, expect to reuse the appropriate mounting location and trim pieces as required by the vehicle.
This part arrives as the fog light assembly for the listed applications. The description below preserves the full manufacturer fitment table so you can verify the exact trim before ordering.
Manufacturer fitment:
2015-2020 Ford F-150 King Ranch
2015-2020 Ford F-150 Lariat
2016-2020 Ford F-150 Limited
2015-2020 Ford F-150 Platinum
2018-2020 Ford F-150 Police Responder
2017-2020 Ford F-150 Raptor
2016-2020 Ford F-150 SSV
2015-2020 Ford F-150 XL
2015-2020 Ford F-150 XLT
2017-2022 Ford F-250 Super Duty King Ranch
2017-2022 Ford F-250 Super Duty Lariat
2018-2022 Ford F-250 Super Duty Limited
2017-2022 Ford F-250 Super Duty Platinum
2017-2022 Ford F-250 Super Duty XL
2017-2022 Ford F-250 Super Duty XLT
2017-2022 Ford F-350 Super Duty King Ranch
2017-2022 Ford F-350 Super Duty Lariat
2018-2022 Ford F-350 Super Duty Limited
2017-2022 Ford F-350 Super Duty Platinum
2017-2022 Ford F-350 Super Duty XL
2017-2022 Ford F-350 Super Duty XLT
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2020 | Ford | F-150 | King Ranch |
| 2015-2020 | Ford | F-150 | Lariat |
| 2016-2020 | Ford | F-150 | Limited |
| 2015-2020 | Ford | F-150 | Platinum |
| 2018-2020 | Ford | F-150 | Police Responder |
| 2017-2020 | Ford | F-150 | Raptor |
| 2016-2020 | Ford | F-150 | SSV |
| 2015-2020 | Ford | F-150 | XL |
| 2015-2020 | Ford | F-150 | XLT |
| 2017-2022 | Ford | F-250 Super Duty | King Ranch |
| 2017-2022 | Ford | F-250 Super Duty | Lariat |
| 2018-2022 | Ford | F-250 Super Duty | Limited |
| 2017-2022 | Ford | F-250 Super Duty | Platinum |
| 2017-2022 | Ford | F-250 Super Duty | XL |
| 2017-2022 | Ford | F-250 Super Duty | XLT |
| 2017-2022 | Ford | F-350 Super Duty | King Ranch |
| 2017-2022 | Ford | F-350 Super Duty | Lariat |
| 2018-2022 | Ford | F-350 Super Duty | Limited |
| 2017-2022 | Ford | F-350 Super Duty | Platinum |
| 2017-2022 | Ford | F-350 Super Duty | XL |
| 2017-2022 | Ford | F-350 Super Duty | XLT |
$429.95
Baja Designs Squadron Amber Fog Pocket Kit for front bumper fog light pockets on the listed Ford Ranger and Ford Bronco applications. It uses Squadron-R SAE amber LED light pods with a fog beam pattern and vehicle-specific pocket brackets to replace the factory fog light pocket setup.
Fits 2019-2023 Ford Ranger XL, XLT, and Lariat; 2021-2025 Ford Bronco Badlands and Outer Banks; 2021-2023 Ford Bronco Base; 2021 Ford Bronco First Edition; 2021-2025 Ford Bronco Big Bend; 2021-2024 Ford Bronco Black Diamond and Wildtrak; 2022-2024 Ford Bronco Everglades; 2022-2025 Ford Bronco Raptor; 2023-2025 Ford Bronco Heritage Edition; 2023-2024 Ford Bronco Heritage Limited Edition; and 2025 Ford Bronco Base and Stroppe Edition.
- Manufacturer part number: 447716
- Amber Squadron-R SAE light pods
- Black gloss powder-coated cast aluminum housing
- Billet machined aluminum bezel
- Stainless steel hardware and brackets
- Aspheric projector optics with a controlled fog cutoff
- 5000K daylight color temperature
- MoistureBlock technology for waterproof, rainproof, submersible protection
- DirectSink thermal management and CopperDrive LED power control
- Complies with SAE J583 fog lamp requirements for on-road use
- 2,420 lumens per light, 29 watts per light, 2.1 amps per light
- 56% increased luminous flux compared to previous-generation SAE light models
- Limited lifetime warranty and 30-day satisfaction guarantee
The kit includes 2 Squadron-R SAE Amber LED light pods, 2 vehicle-specific fog pocket mounting brackets, 2 plug-and-play wiring adapter harnesses, mounting hardware, spacers, and printed installation instructions.
Installation is vehicle-specific. On the 2019 Ford Ranger example, the brackets reuse factory T25 Torx mounting screws, and the install also calls for a 10mm socket wrench, 13mm socket wrench, T25 Torx driver, 4mm Allen wrench, and flathead screwdriver. The wiring adapters are supplied unpinned on the Squadron side, so the black wire terminal must be inserted into slot A and the brown wire terminal into slot B before connecting to the factory fog light plugs. The kit ties into the OEM fog light switch through the factory harness. Baja Designs notes that opening or altering SAE light pods voids the warranty and that uService replaceable components are not supported on SAE series lights. Re-torque all mounting fasteners after 100 miles of driving.
This kit fits models equipped with a factory OEM plastic bumper or Capable Bumper only. It does not fit steel bumper configurations unless specifically noted.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | Bronco | Badlands |
| 2021-2023,2025 | Ford | Bronco | Base |
| 2021-2025 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2025 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2025 | Ford | Bronco | Outer Banks |
| 2022-2025 | Ford | Bronco | Raptor |
| 2025 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
| 2019-2023 | Ford | Ranger | Lariat |
| 2019-2023 | Ford | Ranger | XL |
| 2019-2023 | Ford | Ranger | XLT |
$424.95
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2007-2008,2010-2014 | Ford | F-150 | FX2 |
| 2006-2014 | Ford | F-150 | FX4 |
| 2006-2008,2010-2012 | Ford | F-150 | Harley-Davidson Edition |
| 2006-2014 | Ford | F-150 | King Ranch |
| 2006-2014 | Ford | F-150 | Lariat |
| 2011 | Ford | F-150 | Lariat Limited |
| 2008,2013-2014 | Ford | F-150 | Limited |
| 2009-2014 | Ford | F-150 | Platinum |
| 2006-2014 | Ford | F-150 | STX |
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2008 | Ford | F-150 | THE 60TH ANNIVERSARY EDITION |
| 2006-2014 | Ford | F-150 | XL |
| 2006-2014 | Ford | F-150 | XLT |
| 2005-2011 | Toyota | Tacoma | Base |
| 2005-2011 | Toyota | Tacoma | Pre Runner |
| 2005-2011 | Toyota | Tacoma | X-Runner |
| 2007-2013 | Toyota | Tundra | Base |
| 2007-2013 | Toyota | Tundra | Limited |
| 2010-2013 | Toyota | Tundra | Platinum |
| 2007-2011 | Toyota | Tundra | SR5 |
Manufacturer part number: 447705
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2007-2008,2010-2014 | Ford | F-150 | FX2 |
| 2006-2014 | Ford | F-150 | FX4 |
| 2006-2008,2010-2012 | Ford | F-150 | Harley-Davidson Edition |
| 2006-2014 | Ford | F-150 | King Ranch |
| 2006-2014 | Ford | F-150 | Lariat |
| 2011 | Ford | F-150 | Lariat Limited |
| 2008,2013-2014 | Ford | F-150 | Limited |
| 2009-2014 | Ford | F-150 | Platinum |
| 2006-2014 | Ford | F-150 | STX |
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2008 | Ford | F-150 | THE 60TH ANNIVERSARY EDITION |
| 2006-2014 | Ford | F-150 | XL |
| 2006-2014 | Ford | F-150 | XLT |
| 2005-2011 | Toyota | Tacoma | Base |
| 2005-2011 | Toyota | Tacoma | Pre Runner |
| 2005-2011 | Toyota | Tacoma | X-Runner |
| 2007-2013 | Toyota | Tundra | Base |
| 2007-2013 | Toyota | Tundra | Limited |
| 2010-2013 | Toyota | Tundra | Platinum |
| 2007-2011 | Toyota | Tundra | SR5 |
$495.95
Baja Designs Squadron SAE fog pocket kit replaces the factory front fog light pocket on compatible Ford trucks and puts street-oriented auxiliary lighting in the OEM fog opening. It uses Baja Designs Squadron SAE 3-inch square light pods with a wide cornering / SAE fog beam pattern and a controlled horizon cutoff for Zone 1 forward lighting.
These lights are built around hard anodized and powder-coated cast aluminum housings, billet machined aluminum bezels, hard-coated polycarbonate front lenses, and stainless steel brackets and hardware. Each pod uses 4 Cree LEDs, built-in overvoltage protection, CopperDrive thermal management, and MoistureBlock waterproofing. The SAE models do not use the standard uService replaceable-lens setup; opening or tampering with the lenses voids the warranty and requires factory service.
Fitment is specific to the factory fog light pocket and OEM fog light wiring. Baja Designs lists this kit for 2015-2020 Ford F-150, 2017-2022 Ford F-250 Super Duty, and 2017-2022 Ford F-350 Super Duty. It is intended as a replacement for OEM halogen fog light housings only and does not fit models equipped with OEM factory LED fog light strips.
The kit installs as a direct bolt-on in the factory bumper fog light openings with no drilling or cutting required. The included plug-and-play wiring harness adapter connects to the vehicle's OEM fog light harness so the factory fog light switch still controls the lights. Installation is straightforward, but you should confirm your truck has the correct halogen fog pocket setup before ordering.
- MPN: 447618
- Series: Squadron SAE
- Light pod form factor: 3-inch square pod
- Beam pattern: Wide cornering / SAE fog with controlled cutoff
- Housing: Hard anodized and powder-coated cast aluminum
- Bezel: Billet machined aluminum
- Lens: Hard-coated polycarbonate
- Bracket and hardware material: Stainless steel
- LEDs per pod: 4 Cree LEDs
- Protection: IP69K, IK10 compliant, exceeds MIL-STD-810G, built-in overvoltage protection
- Included: 2 Squadron SAE light pods, 2 vehicle-specific stainless steel mounting brackets, 1 plug-and-play wiring harness adapter, and complete stainless steel mounting hardware
Per the manufacturer application list, this kit fits the following vehicles: 2015-2020 Ford F-150 King Ranch, Lariat, Limited, Platinum, Police Responder, Raptor, SSV, XL, and XLT; 2017-2022 Ford F-250 Super Duty King Ranch, Lariat, Limited, Platinum, XL, and XLT; and 2017-2022 Ford F-350 Super Duty King Ranch, Lariat, Limited, Platinum, XL, and XLT.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2020 | Ford | F-150 | King Ranch |
| 2015-2020 | Ford | F-150 | Lariat |
| 2016-2020 | Ford | F-150 | Limited |
| 2015-2020 | Ford | F-150 | Platinum |
| 2018-2020 | Ford | F-150 | Police Responder |
| 2017-2020 | Ford | F-150 | Raptor |
| 2016-2020 | Ford | F-150 | SSV |
| 2015-2020 | Ford | F-150 | XL |
| 2015-2020 | Ford | F-150 | XLT |
| 2017-2022 | Ford | F-250 Super Duty | King Ranch |
| 2017-2022 | Ford | F-250 Super Duty | Lariat |
| 2018-2022 | Ford | F-250 Super Duty | Limited |
| 2017-2022 | Ford | F-250 Super Duty | Platinum |
| 2017-2022 | Ford | F-250 Super Duty | XL |
| 2017-2022 | Ford | F-250 Super Duty | XLT |
| 2017-2022 | Ford | F-350 Super Duty | King Ranch |
| 2017-2022 | Ford | F-350 Super Duty | Lariat |
| 2018-2022 | Ford | F-350 Super Duty | Limited |
| 2017-2022 | Ford | F-350 Super Duty | Platinum |
| 2017-2022 | Ford | F-350 Super Duty | XL |
| 2017-2022 | Ford | F-350 Super Duty | XLT |
$358.95
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | Bronco | Badlands |
| 2021-2023,2025 | Ford | Bronco | Base |
| 2021-2025 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2025 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2025 | Ford | Bronco | Outer Banks |
| 2022-2025 | Ford | Bronco | Raptor |
| 2025 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
| 2019-2023 | Ford | Ranger | Lariat |
| 2019-2023 | Ford | Ranger | XL |
| 2019-2023 | Ford | Ranger | XLT |
$1,287.95
Fits 2017-2020 Ford F-150 King Ranch, Lariat, Limited, Platinum, Police Responder, Raptor, SSV, XL, and XLT.
This Baja Designs Squadron Pro SAE 2.0 / S2 Fog Pocket Kit is a vehicle-specific LED fog light upgrade for the front bumper fog pockets. It combines SAE-compliant S2 fog pods for the factory fog light circuit with Squadron 2.0 Pro pods for the auxiliary upfitter switch circuit, giving the truck a clean fog-pocket install with the correct beams for street and off-road use.
The kit is built around black powder-coated aluminum housings, billet machined aluminum bezels, and hard-coated polycarbonate lenses. Baja Designs also uses stainless steel hardware and bracket mounts, a 5000K daylight color temperature, DirectSink thermal management, MoistureBlock technology, built-in overvoltage protection, and IP69K water resistance. The Squadron 2.0 Pro pods also use uService replaceable lenses and optics with clip-in reflectors and updated sealing gaskets.
- Manufacturer part number: 440063
- S2 SAE pods with clear lenses and SAE J583 fog lamp compliance
- Squadron 2.0 Pro pods with clear lenses
- Driving/Combo and Spot beam patterns included
- Integrated 9-color selectable RGB backlight on the Squadron 2.0 Pro pods
- 4-pin Deutsch-style electrical connectors
- Vehicle-specific front bumper fog pocket mounting brackets
- Upfitter harnesses with Hi/Low backlight wiring
- 4-pin Deutsch 5-foot wiring extensions
- 4-pin Deutsch to 2-pin WeaPac adapter harnesses, Baja Designs MPN 64-0060
- 4-pin Deutsch 2-light splitter harnesses, Baja Designs MPN 66-0004
- All required mounting hardware, including stainless steel bolts, washers, and lock nuts
Installation requires disconnecting the battery, removing the bumper support-rod hardware, and routing the harnesses along the frame rail beside the stock wiring or brake lines. The brackets use supplied bolts, washers, lock nuts, and one OEM factory bolt per side. The S2 SAE lights connect to the factory fog light circuit through the included 64-0060 adapter harness. The Squadron Pro upfitter harness connects to the OEM Ford auxiliary switch circuit; the white positive wire ties into the Ford upfitter wire and the black wire grounds to the chassis. Baja Designs notes that the OEM AUX switch should be rated for at least 15 amps for the combined load. On the Raptor, the passenger-side firewall pass-through wires are used for the upfitter connection, and the wire bundle nearest the engine is the one to use.
The kit arrives as a complete lighting and mounting package with the pods, brackets, harnesses, extensions, adapters, splitter harnesses, and hardware needed for the fog-pocket installation. The S2 SAE pods are intended for the factory fog light function, while the Squadron 2.0 Pro pods are intended for off-road use through the auxiliary switch circuit.
Made in the USA in San Marcos, California. The Squadron 2.0 Pro pods use a 4-pin Deutsch-style connector, and the S2 SAE pods are serviceable only by return to Baja Designs; opening or tampering with them voids the manufacturer warranty. The Squadron 2.0 Pro pods support uService lens and optic replacement.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | King Ranch |
| 2017-2020 | Ford | F-150 | Lariat |
| 2017-2020 | Ford | F-150 | Limited |
| 2017-2020 | Ford | F-150 | Platinum |
| 2018-2020 | Ford | F-150 | Police Responder |
| 2017-2020 | Ford | F-150 | Raptor |
| 2017-2020 | Ford | F-150 | SSV |
| 2017-2020 | Ford | F-150 | XL |
| 2017-2020 | Ford | F-150 | XLT |
$1,019.95
This is the Diode Dynamics SS3 Dual-Color LED Fog Light Kit for the 2017-2020 Ford F-150 Raptor. It replaces the stock fog lamps with road-legal, color-selectable fog pods and adds four extra off-road pods in the factory bumper openings, so one install gives you both a street-legal fog setup and serious trail lighting.
Six pods, two jobs. The kit includes two SAE fog pods and four combo/driving pods. The fog pods throw a wide, flat pattern that lights up the area right in front of the truck, and the combo pods add a smooth, evenly blended beam for faster driving off-road.
Switch between white and yellow. The fog pods are dual-color: 6000K cool white for a crisp look, or 3000K selective yellow for better contrast in rain, snow, fog and dust. You change color with the factory fog light switch and no extra switch is needed. Cycle the fog lights off and on three times to enter programming mode, then leave the lamps on for at least five seconds when your preferred color shows to save it. The four off-road pods stay 6000K white.
Independent control. The included harnesses let the fog pods behave like factory fog lights, coming on with the fog switch and with the headlights. The off-road pods run separately from the factory aux switches or the included 3-way toggle, so you can pick road-legal fog output or extra off-road light as needed.
Built for Raptor use. Each pod has an amber backlight that can be controlled on its own, and the pods are rated IP69K for water and high-pressure washing, with passive pin-fin cooling and a polycarbonate lens in an aluminum housing. Diode Dynamics engineers and assembles Stage Series lighting in the USA and backs the kit with a limited lifetime warranty. The fog pattern meets the SAE J583 foglamp standard when installed as a pair and aimed to your state's rules; check local laws before use.
Features
- Two dual-color SAE fog pods (6000K white or 3000K yellow) and four white combo/driving off-road pods
- SmartSelect color control from the factory fog light switch
- Independent control of road-legal fog and off-road lighting
- Integrated amber backlighting on every pod
- Bolt-on fitment in the factory bumper openings with CAD-designed brackets and mounting hardware
- Operating voltage 9-30V, IP69K waterproof
- Engineered and assembled in the USA, limited lifetime warranty
In the box: two SAE fog SS3 pods, four combo/driving SS3 pods, one dual-output fog harness, one heavy-duty dual-output 4-pin harness, two 3-way backlight splitters, four zip ties, and mounting hardware with a guide.
Fitment: 2017-2020 Ford F-150 Raptor. Fitment confirmed against Diode Dynamics' published application list.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
$1,349.95
The Diode Dynamics Stage Series Fog Pocket Kit adds SAE-compliant yellow fog lights and four off-road pods to the factory bumper openings of your Ford Bronco Raptor. This is the Pro version with 3000K selective yellow fog pods.
Fog and off-road lighting in one kit. The CAD-designed stainless steel brackets mount two SS3 LED pods with an SAE-compliant fog pattern and four SSC2 pods with a combo pattern in the factory bumper openings. With the included harnesses, you can switch between road-legal fog lights and off-road lights from your factory aux switch bank.
Wide fog pattern. The SS3 fog pods spread light across an 80-degree field of view with high intensity, and the SSC2 combo pods add a focused rectangular 40x20 degree pattern with a flood side and a driving side. When installed as a pair and aimed to your state's rules, the fog pattern meets the SAE J583 foglamp standard. Check your local laws.
Color and power. The fog pods are 3000K selective yellow, a color that gives higher contrast in rain, snow and dust. The SSC2 off-road pods are 6000K cool white. The Pro version doubles the total power, at about 36 watts per pod.
Backlight and control. Each pod has an amber backlight you can control separately from the factory aux switches, and the fog pods turn on with the headlights and fog switch the same way factory fog lights do.
Steel bumper required. Diode lists this kit for the 2021-2025 Bronco with the factory steel bumper and says it is not compatible with the plastic bumper. Diode does not list the Bronco Raptor separately, so our Raptor fitment follows its steel-bumper rule and our own fitment review.
Features
- Two SS3 yellow SAE fog pods and four SSC2 white combo pods (Pro)
- Mounts in the factory bumper openings with CAD-designed stainless steel brackets
- Harnesses included for independent fog and off-road control from the factory aux switches
- Integrated amber backlight on every pod
- Engineered and assembled in the USA
Fitment: 2022-2025 Bronco Raptor, with the factory steel bumper. Diode Dynamics lists this kit for the 2021-2025 Bronco with steel bumper; Bronco Raptor is included per our fitment review. Fitment follows Diode Dynamics' published application list.
Guides & Manuals
Installation Instructions
Install Guide (Diode Dynamics)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | Bronco | All trims with factory steel bumper |
| 2022-2025 | Ford | Bronco | Raptor |
$989.95
The Diode Dynamics Stage Series Fog Pocket Kit adds SAE-compliant yellow fog lights and four off-road pods to the factory bumper openings of your Ford Bronco Raptor. This is the Sport version with 3000K selective yellow fog pods.
Fog and off-road lighting in one kit. The CAD-designed stainless steel brackets mount two SS3 LED pods with an SAE-compliant fog pattern and four SSC2 pods with a combo pattern in the factory bumper openings. With the included harnesses, you can switch between road-legal fog lights and off-road lights from your factory aux switch bank.
Wide fog pattern. The SS3 fog pods spread light across an 80-degree field of view with high intensity, and the SSC2 combo pods add a focused rectangular 40x20 degree pattern with a flood side and a driving side. When installed as a pair and aimed to your state's rules, the fog pattern meets the SAE J583 foglamp standard. Check your local laws.
Color and power. The fog pods are 3000K selective yellow, a color that gives higher contrast in rain, snow and dust. The SSC2 off-road pods are 6000K cool white. The Sport version uses high-intensity LEDs at about 14.5 watts per pod.
Backlight and control. Each pod has an amber backlight you can control separately from the factory aux switches, and the fog pods turn on with the headlights and fog switch the same way factory fog lights do.
Steel bumper required. Diode lists this kit for the 2021-2025 Bronco with the factory steel bumper and says it is not compatible with the plastic bumper. Diode does not list the Bronco Raptor separately, so our Raptor fitment follows its steel-bumper rule and our own fitment review.
Features
- Two SS3 yellow SAE fog pods and four SSC2 white combo pods (Sport)
- Mounts in the factory bumper openings with CAD-designed stainless steel brackets
- Harnesses included for independent fog and off-road control from the factory aux switches
- Integrated amber backlight on every pod
- Engineered and assembled in the USA
Fitment: 2022-2025 Bronco Raptor, with the factory steel bumper. Diode Dynamics lists this kit for the 2021-2025 Bronco with steel bumper; Bronco Raptor is included per our fitment review. Fitment follows Diode Dynamics' published application list.
Guides & Manuals
Installation Instructions
Install Guide (Diode Dynamics)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | Bronco | All trims with factory steel bumper |
| 2022-2025 | Ford | Bronco | Raptor |
$989.95
The Diode Dynamics Stage Series Fog Pocket Kit adds SAE-compliant white fog lights and four off-road pods to the factory bumper openings of your Ford Bronco Raptor. This is the Sport version with 6000K cool white fog pods.
Fog and off-road lighting in one kit. The CAD-designed stainless steel brackets mount two SS3 LED pods with an SAE-compliant fog pattern and four SSC2 pods with a combo pattern in the factory bumper openings. With the included harnesses, you can switch between road-legal fog lights and off-road lights from your factory aux switch bank.
Wide fog pattern. The SS3 fog pods spread light across an 80-degree field of view with high intensity, and the SSC2 combo pods add a focused rectangular 40x20 degree pattern with a flood side and a driving side. When installed as a pair and aimed to your state's rules, the fog pattern meets the SAE J583 foglamp standard. Check your local laws.
Color and power. The fog pods are 6000K cool white, a true cool white that matches most factory LED lighting. The SSC2 off-road pods are 6000K cool white. The Sport version uses high-intensity LEDs at about 14.5 watts per pod.
Backlight and control. Each pod has an amber backlight you can control separately from the factory aux switches, and the fog pods turn on with the headlights and fog switch the same way factory fog lights do.
Steel bumper required. Diode lists this kit for the 2021-2025 Bronco with the factory steel bumper and says it is not compatible with the plastic bumper. Diode does not list the Bronco Raptor separately, so our Raptor fitment follows its steel-bumper rule and our own fitment review.
Features
- Two SS3 white SAE fog pods and four SSC2 white combo pods (Sport)
- Mounts in the factory bumper openings with CAD-designed stainless steel brackets
- Harnesses included for independent fog and off-road control from the factory aux switches
- Integrated amber backlight on every pod
- Engineered and assembled in the USA
Fitment: 2022-2025 Bronco Raptor, with the factory steel bumper. Diode Dynamics lists this kit for the 2021-2025 Bronco with steel bumper; Bronco Raptor is included per our fitment review. Fitment follows Diode Dynamics' published application list.
Guides & Manuals
Installation Instructions
Install Guide (Diode Dynamics)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | Bronco | All trims with factory steel bumper |
| 2022-2025 | Ford | Bronco | Raptor |
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.