Welcome to RaptorsOnly.com
-
Brands
Shop by brand
- 3D MAXpider
- Access
- Addictive Desert Designs
- Advan
- AEM Induction
- aFe
- Air Lift
- Airaid
- Alcon
- AlphaRex
- AMP Research
- AMS
- Anderson Composites
- ANZO
- ARB
- Atturo Tire
- AutoMeter
- AVS
- AWE Tuning
- BackRack
- Baer Brakes
- Baja Designs
- BAK
- Banks Power
- BBK
- BBS
- BD Diesel
- Belltech
- Bestop
- BFGoodrich
- BMC
- Body Armor 4x4
- Borla
- Brembo
- Brembo OE
- Bully Dog
- Bushwacker
- Camburg
- Clevite
- COBB
- Cometic Gasket
- COMP Cams
- CORSA Performance
- Covercraft
- CSF
- DBA
- DeatschWerks
- DFC
- Diode Dynamics
- DS18
- DV8 Offroad
- Eaton
- EBC
- Eibach
- Enkei
- Extang
- Fabtech
- Fel-Pro
- fifteen52
- Firestone
- Flowmaster
- Ford Racing
- Forgestar
- FORM Lighting
- FOX
- Garrett
- Gates
- GEN-Y Hitch
- Go Fast Bits
- Go Rhino
- Gram Lights
- Granatelli Motor Sports
- GSC Power Division
- Hawk Performance
- Hella
- Hellwig
- Hotchkis
- Husky Liners
- ICON
- Injen
- J&L
- JBA
- JLT
- K&N Engineering
- KC HiLiTES
- King Engine Bearings
- King Shocks
- Kleinn Air Horns
- Kooks Headers
- KYB
- LIQUI MOLY
- LUND
- Magnaflow
- Mahle OE
- Maxtrac
- Mayhem
- MBRP
- McGard
- Method Wheels
- MGP
- Michelin
- Mickey Thompson
- Mishimoto
- Moog
- Motul
- MTX Wheels
- N-Fab
- Nacho Offroad Technology
- NGK
- Nitrous Express
- Odyssey Battery
- ORACLE Lighting
- PowerStop
- Putco
- QA1
- Raceline
- Radium Engineering
- Rally Armor
- Rampage
- Raxiom
- Retrax
- Rhino-Rack
- Ridetech
- Rigid Industries
- Rival 4x4
- RockJock
- Roll-N-Lock
- Roush
- Royal Purple
- SCT Performance
- Skyjacker
- Snow Performance
- SPC Performance
- SPOD
- Stainless Works
- Superlift
- Superpro
- Timbren
- Torque Solution
- TOYO
- Truxedo
- Tuff Country
- Turbosmart
- UMI Performance
- Undercover
- Volant
- Vossen
- Wagner Tuning
- WeatherTech
- Weld
- Westin
- Whiteline
- Wilwood
- Yokohama Tire
- Yukon Gear & Axle
- Zone Offroad
No brands found. Try another name or initial.
156 brands
View all brands -
F-150 Raptor
- F-150 Raptor
-
1st Gen (2010-2014)
-
2nd Gen (2017-2020)
-
3rd Gen (2021-Present)
-
Raptor R (2023-Present)
-
Bronco Raptor
- Bronco Raptor
-
Suspension
-
Lighting
-
Bumpers & Armor
-
Racks
-
Interior Accessories
-
Exterior Accessories
-
Performance
-
Wheels & Tires
-
Brakes
-
Drivetrain
-
Engine & Cooling
-
Ranger Raptor
- Ranger Raptor
-
Suspension
-
Lighting
-
Bumpers & Armor
-
Racks
-
Interior Accessories
-
Exterior Accessories
-
Performance
-
Wheels & Tires
-
Brakes
-
Drivetrain
-
Engine & Cooling
Your cart
Subheading
Product comparison
Describe you product comparison grid
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
24 products
24 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$169.00
The ORACLE 2007-2014 Toyota Tundra Curved 50" LED Light Bar Brackets allow you to mount a 50" Curved LED Light Bar to the roof of your vehicle. These brackets are designed to match the curvature of the ORACLE 50" 288W LED Light Bar and are made from high quality weather resistant steel. Installation is fast and simple. These brackets mount onto the drip sill, but fully protect your vehicle from the outside elements by using the included all-weather gaskets. All mounting hardware, weather gaskets and DIY Installation Instructions are included. Note: Some drilling is required. Vehicle Application / Fitment: - 2007 Toyota Tundra - 2008 Toyota Tundra - 2009 Toyota Tundra - 2010 Toyota Tundra - 2011 Toyota Tundra - 2012 Toyota Tundra - 2013 Toyota Tundra- 2014 Toyota Tundra Product Features: - Weight: 1 lb. 3.2 oz. - Width: 3.5" - Height: .125" - Length: 14.5" - Mounts to Upper Drip Sill - Mounting Hardware Included - Weather Resistant Coating - All Weather Mounting w/ Rubber Gaskets - Welded Steel Construction - Will Fit All 2007-2014 Toyota Tundra Models Package Includes: - 2 x 2007-2014 Toyota Tundra ORACLE Curved 50" LED Light Bar Brackets - Mounting Hardware - All Weather-Gaskets - Installation Instructions
- Made from high quality weather resistant steel
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2014 | Toyota | Tundra | 1794 Edition |
| 2007-2013 | Toyota | Tundra | Base |
| 2007-2014 | Toyota | Tundra | Limited |
| 2010-2014 | Toyota | Tundra | Platinum |
| 2014 | Toyota | Tundra | SR |
| 2007-2011,2014 | Toyota | Tundra | SR5 |
$1,229.99
Give your Ford Raptor's fog lights the ultimate upgrade with the 2021+ Ford Raptor Triple Fog Kit. Designed to replace the OEM fog lights in the 2021+ Ford Raptor, the Triple Fog Kit includes the brackets, two D-Series SAE PRO lights, two D-Series Spot lights, two D-Series Drive lights, and hardware. RIGID's 2021+ Ford Raptor Triple Fog Kit provides a street-legal lighting solution for low-visibility conditions.
Installation InstructionsInstallation Instructions
- All Necessary Hardware Included
- Seamless OEM Fitment
- Fully Adjustable
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | F-150 | Raptor |
$135.99
This RIGID Dual Pod A-Pillar mount kit is designed specifically for the 2021 Bronco and allows for a clean install of RIGID's high output LED lighting. This A-Pillar mounting kit fits two of RIGID's 4 in. 360-Series, D-Series or Radiance Pods on each mount. Own The Night with RIGID's Dual Pod A-Pillar LED mount for your 2021 Ford Bronco . All of RIGID's grilles, OE Brackets, and Mounts are made with stainless steel and covered with UV and abrasion resistant powder coat to ensure years of use in the harshest conditions. Professional installation recommended.
Installation Instructions- UV And Abrasion Resistant Powder Coat
- Stainless Steel Construction
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | Bronco | Badlands |
| 2021-2023,2025-2026 | Ford | Bronco | Base |
| 2021-2026 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2026 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2026 | Ford | Bronco | Outer Banks |
| 2022-2026 | Ford | Bronco | Raptor |
| 2025-2026 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
$1,116.95
Baja Designs 21-25 Ford Raptor (Base/37/R) LP4 A-Pillar Kit
- Limited Lifetime Warranty - Complete Purchase Protection
- ClearView - All The Light, Right Where You Need It
- uService - Replaceable Lenses And Optics
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
Manufacturer part number: 448068
$189.99
Upgrade your 2024+ Ford Ranger with the A-Pillar Mount, crafted for adventure off the beaten path. This mount attaches cleanly to the A-Pillar mounting location and is compatible with all RIGID pod lights, including 4 in. 360-Series, D-Series, D-SS, and Radiance Pods. Simplify the installation of your next RIGID pod on your Ranger and Own The Night.
- Scratch/UV Resistant Coating
- Lamps Sold Seperately
- 304 Stainless Steel
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Lariat |
| 2024-2026 | Ford | Ranger | Raptor |
| 2024-2026 | Ford | Ranger | XL |
| 2024-2026 | Ford | Ranger | XLT |
$529.99
Take your 2021+ Ford F-150 or 2021+ Ford Raptor light game to the next level with RIGID's 2021+ F-150 and Ford Raptor A-Pillar D-SS Kit. RIGID designed a complete kit for the Ford A-Pillar that includes mounts, all necessary hardware, and a RIGID favorite, a pair of D-SSs. The kit has everything you need to install and connect a pair of RIGID's D-SS lights into your F-150 or Raptor's, A-Pillar light locations.
Installation Instructions- Fits to your F-150s A-Pillar location
- All Necessary Hardware Included
- Fully Adjustable
- Lights Included
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | Police Responder |
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
$269.99
Designed for the 2021+ Ford F-150 and 2021+ Ford Raptor, RIGID's 2021+ Ford F-150 and 2021+ Ford Raptor A-Pillar Mount mounts easily to the Ford F-150 or Ford Raptor. The brackets fit onto the A-Pillar mounting location, fits any of RIGID's pod lights. Customize your A-Pillar lighting solution and Own The Night with the 2021+ Ford F-150/ Ford Raptor A-Pillar Mount.
Installation Instructions- UV And Abrasion Resistant Powder Coat
- Stainless Steel Construction
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | Police Responder |
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
$434.99
This RIGID Roof Pod Mount is designed for the 2021+ Bronco and allows for a clean install of RIGID's high output LED lighting. This Bronco Roof Pod Mount fits eight of RIGID's 4 in. 360-Series. Own The Night with RIGID's Roof Pod Mount for your 2021 Ford Bronco. All of RIGID's OE Brackets and Mounts are made with stainless steel and covered with UV and abrasion resistant powder coat to ensure years of use in the harshest conditions. Professional installation recommended.
Installation Instructions- Fits Up To Eight 4 Inch 360-Series Lights
- UV and Abrasion Resistant Powder Coat
- Stainless Steel Construction
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | Bronco | Badlands |
| 2021-2023,2025-2026 | Ford | Bronco | Base |
| 2021-2026 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2026 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2026 | Ford | Bronco | Outer Banks |
| 2022-2026 | Ford | Bronco | Raptor |
| 2025-2026 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
$189.99
This RIGID roof rack mount kit is designed specifically for the 2021 Bronco, with a factory roof rack, and allows for a clean install of RIGID's high output LED lighting. This roof rack mounting kit fits RIGID's 40 in. SR-Series PRO straight LED Light Bar. Own The Night with RIGID's roof rack mount LED light bar kit for your 2021 Ford Bronco. All of RIGID's grilles, OE Brackets, and Mounts are made with stainless steel and covered with UV and abrasion resistant powder coat to ensure years of use in the harshest conditions. Professional installation recommended.
Installation Instructions- UV And Abrasion Resistant Powder Coat
- Stainless Steel Construction
- Factory Roof Rack Required
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | Bronco | Badlands |
| 2021-2023,2025-2026 | Ford | Bronco | Base |
| 2021-2026 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2026 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2026 | Ford | Bronco | Outer Banks |
| 2022-2026 | Ford | Bronco | Raptor |
| 2025-2026 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
$1,109.99
This RIGID Roof Line light kit is designed specifically for the 2021+ Ford Bronco and allows for a clean install of RIGID's high output LED lighting. This Roof Line light kit includes two roof line bar brackets, isolation bases, stud covers, a 40 Inch SR-Series Spot/Flood Combo light bar, solid black light covers, and a wiring harness. Own The Night with RIGID's complete Roof Line LED light kit for your Ford Bronco.
Installation InstructionsInstallation Instructions
- RFI/EMI Protection/Reverse Polarity Protection9-36 VDC Operation
- UV And Abrasion Resistant Powder Coat
- Operating Temp -40 Deg F To 145 Deg F
- Integrated Thermal Management System
- Impact Resistant Polycarbonate Lens
- IP68 Compliant - Dust/Water Ingress
- Over/Under Voltage Protection
- Stainless Steel Construction
- Alloy Housing and Heatsink
- Waterproof Connector
- RoHS Compliant
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | Bronco | Badlands |
| 2021-2023,2025-2026 | Ford | Bronco | Base |
| 2021-2026 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2026 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2026 | Ford | Bronco | Outer Banks |
| 2022-2026 | Ford | Bronco | Raptor |
| 2025-2026 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
$169.99
This RIGID roof line mount kit is designed specifically for the 2021 Bronco and allows for a clean install of RIGID's high output LED lighting. This roof line mounting kit fits RIGID's 40 in. SR-Series PRO straight LED Light Bar. Own The Night with RIGID's roof line mount LED light bar kit for your 2021 Ford Bronco. All of RIGID's grilles, OE Brackets, and Mounts are made with stainless steel and covered with UV and abrasion resistant powder coat to ensure years of use in the harshest conditions. Professional installation recommended.
Installation Instructions- UV And Abrasion Resistant Powder Coat
- Stainless Steel Construction
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | Bronco | Badlands |
| 2021-2023,2025-2026 | Ford | Bronco | Base |
| 2021-2026 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2026 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2026 | Ford | Bronco | Outer Banks |
| 2022-2026 | Ford | Bronco | Raptor |
| 2025-2026 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
$1,020.95
Baja Designs XL80 A-Pillar Light Kit for the 2021-2026 Ford F-150 Raptor mounts auxiliary lighting at the base of the windshield using existing OEM cowl mounting points. It adds a pair of XL80 LED pods without cutting or body modifications, making it a direct bolt-on solution for Raptor owners who want more light on the sides of the truck and into corner turns.
This kit is built around Baja Designs' vehicle-specific A-pillar brackets and includes the wiring needed to integrate with factory Ford Raptor interior upfitter overhead switches. The pods ship in the Clear Driving/Combo configuration, and the kit also includes clear spot and wide cornering lens kits so the beam pattern can be changed to suit the way the truck is used.
- Part number: 448060
- Fits 2021-2026 Ford F-150 Raptor
- Mounts to existing OEM cowl locations
- No cutting or body modifications required
- Includes 2 XL80 LED light pods
- Includes 2 vehicle-specific A-pillar mounting brackets
- Includes trigger switch wiring harness, part 640180, for OEM upfitter switches
- Includes 2 clear spot lens kits and 2 clear wide cornering lens kits
- Includes stainless steel mounting hardware
- As-shipped beam pattern: Driving/Combo
- XL80 pod size: 4.4 in. x 4.4 in. x 3.65 in. depth
- Light output: 9,022 raw lumens per light
- Power rating: 75.9 W per light
- Current draw: 5.50 A per light
- Color temperature: 5000K daylight
The XL80 platform uses Baja Designs features including uService replaceable lenses and optics, ClearView lighting control, MoistureBlock sealing, DirectSink thermal management, and CopperDrive circuitry. The housing is hard-anodized and powder-coated cast aluminum with a black powder-coated finish, a billet machined aluminum bezel, and a hard-coated polycarbonate lens. Hardware and brackets are stainless steel.
Installation is straightforward for a bolt-on light mount kit: position the brackets at the factory mounting points, secure the pods, and connect the harness to the truck's upfitter switch circuit. The kit arrives as individual components ready for assembly, so wiring and final aiming are part of the install. The included lenses and brackets let you tailor the beam pattern after the lights are mounted.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
$761.95
Fits 2021-2026 Ford F-150 Raptor. This Baja Designs XL Sport A-Pillar Light Kit mounts auxiliary forward and ditch lighting to the factory A-pillar and hood hinge points, helping fill in blind spots and add near-field and distance coverage beyond the truck’s stock headlights.
The kit uses Baja Designs XL Sport LED pods with a clear lens and driving/combo beam pattern. Each pod uses 4 Cree LEDs, produces 3,162 raw lumens, draws 30.36 W and 2.2 A, and runs at 5000K daylight color temperature. The housings use powder-coated cast aluminum / hard-anodized aluminum construction, the bezels are powder-coated cast aluminum / billet machined aluminum, the lenses are hard-coated polycarbonate, and the brackets and hardware are stainless steel.
Baja Designs lists IP69K protection, IK10 compliance, built-in overvoltage protection, and a service life of 49,930 hours. The company also lists uService replaceable lenses and optical components, ClearView optics, MoistureBlock sealing, DirectSink thermal management, and CopperDrive to run the LEDs at full output safely.
Installation is direct bolt-on to the factory mounting points with no drilling or vehicle modifications. Baja Designs says the kit installs in under 30 minutes with basic hand tools. The included trigger switch wiring harness is designed to tie into the factory Ford Raptor auxiliary upfitter switches. During installation, position the pods so they do not block hood prop rod access.
- Manufacturer part number: 448058
- Fitment: 2021-2026 Ford F-150 Raptor
- Includes: 2 XL Sport LED light pods, 2 A-pillar mounting brackets, 1 upfitter/trigger switch wiring harness, and stainless steel mounting hardware
- Beam pattern: Driving/Combo
- Lens color: Clear
- Light output: 3,162 raw lumens per pod
- Color temperature: 5000K
- Electrical draw: 30.36 W and 2.2 A per pod
- Pod dimensions: 4.43 in x 4.43 in x 3.65 in
- Pod weight: 2.45 lb each
- Protection: IP69K, IK10
The bracket design allows aim adjustment for forward or ditch lighting coverage, so the beams can be set up for the way the truck is used on road or on trail.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
$384.95
Fits 2017-2021 Ford F-150 Raptor.
This Baja Designs A-pillar light kit mounts auxiliary Squadron Sport LED pods at the base of the windshield in the hood ditch position, giving you forward lighting where the factory headlights leave a dark gap. It is a bolt-on setup for the factory hood hinge/A-pillar mounting points, so no cutting or drilling is required.
The kit is built around Baja Designs' off-road lighting hardware and includes a spot beam pattern with a clear lens. The housings are black powder-coated cast aluminum, the bezels are cast aluminum, the front lenses are hard-coated polycarbonate, and the brackets and mounting hardware are stainless steel. Baja Designs also calls out uService replaceable lenses and optical components, ClearView optical distribution, MoistureBlock sealing, CopperDrive circuitry, DirectSink thermal management, and built-in overvoltage protection.
- MPN: 447680
- Vehicle fitment: 2017-2021 Ford F-150 Raptor
- Mounting position: A-pillar / hood ditch
- Beam pattern: Spot
- Lens color: Clear
- Housing color: Black
- Light pod size: 3 in square; 3.07 in H x 2.77 in D x 3.07 in W
- Per-pod weight: 12 oz
- LED count: 4 LEDs per pod
- Operating voltage: 9-36V DC
- Rated life: 49,930 hours average
- Waterproof rating: IP69K
- Impact rating: IK10 compliant
- Environmental durability: exceeds MIL-STD810G
- Color temperature: 5000K daylight
The box includes two Squadron Sport LED light pods, two vehicle-specific A-pillar mounting brackets, a wiring harness, and stainless steel mounting hardware. The harness type is described differently by retailers, but it is supplied as the wiring harness needed to complete the install. Wiring is straightforward on the truck, but the exact access steps, wrench sizes, and torque specs are vehicle-dependent and were not provided on the product page. As with most hood-hinge light mounts, plan to aim the pods after installation so the spot pattern lands where you want it on the road or trail.
Baja Designs' published output figures also vary by source for this part number, so the safe details to rely on are the fitment, beam pattern, construction, and included hardware above.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2021 | Ford | F-150 | Raptor |
$719.08
This add-on light hoop from Addictive Desert Designs bolts onto the ADD PRO Bolt-On front bumper for the Ford F-150 Raptor and gives you room for four more 6-inch round lights. It is made in the USA, and the whole install takes only a handful of minutes.
Four more round lights. The hoop accommodates four 6-inch round LED lights, on top of what the bumper's own center mount carries, for extra reach on dark trails.
Same tubing as the bumper. It is built from the same .120-inch wall steel tubing as the PRO Bolt-On bumper it mounts to, so the styling stays consistent and low-profile.
Stays close to the bumper. The hoop protrudes only 4 inches further than the main tube of the bumper, so it does not push the front of the truck out any more than it has to.
Fully bolt-on. No cutting or welding is needed, and it mounts to the ADD PRO Bolt-On front bumper (F218102070103), which is required.
Features
- Works with the ADD PRO Bolt-On front bumper
- Accommodates four 6 in. round lights
- Protrudes only 4 in. further than the bumper's main tube
- .120 in. wall steel tubing
- Fully bolt-on
- Made in the USA
Fitment: 2021-2026 Ford F-150 Raptor and 2023+ Ford F-150 Raptor R (2023-2026), the vehicles ADD lists for the PRO Bolt-On front bumper this hoop adds to. The hoop's own page text still reads 2021-2023, which looks like an older note, so fitment follows the bumper's listing. Fitment confirmed against Addictive Desert Designs' published application list for the PRO Bolt-On front bumper.
Guides & Manuals
Bumper, Winch Kit, and Light Hoop Install GuideThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$104.99
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2024 | Ford | Bronco | Badlands |
| 2022-2023 | Ford | Bronco | Base |
| 2022-2024 | Ford | Bronco | Big Bend |
| 2022-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2023-2024 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2022-2024 | Ford | Bronco | Outer Banks |
| 2022-2024 | Ford | Bronco | Raptor |
| 2022-2024 | Ford | Bronco | Wildtrak |
| 2021 | Jeep | Wrangler | 80th Anniversary |
| 2021,2023 | Jeep | Wrangler | Freedom |
| 2023 | Jeep | Wrangler | High Altitude |
| 2023-2024 | Jeep | Wrangler | High Altitude 4xe |
| 2023 | Jeep | Wrangler | High Tide |
| 2021 | Jeep | Wrangler | Islander |
| 2018-2024 | Jeep | Wrangler | Rubicon |
| 2023-2024 | Jeep | Wrangler | Rubicon 392 |
| 2024 | Jeep | Wrangler | Rubicon 392 Final Edition |
| 2023-2024 | Jeep | Wrangler | Rubicon 4xe |
| 2024 | Jeep | Wrangler | Rubicon X |
| 2024 | Jeep | Wrangler | Rubicon X 4xe |
| 2023-2024 | Jeep | Wrangler | Sahara |
| 2023-2024 | Jeep | Wrangler | Sahara 4xe |
| 2023 | Jeep | Wrangler | Sahara Altitude |
| 2018-2024 | Jeep | Wrangler | Sport |
| 2023 | Jeep | Wrangler | Sport Altitude |
| 2018-2024 | Jeep | Wrangler | Sport S |
| 2024 | Jeep | Wrangler | Sport S 4xe |
| 2021 | Jeep | Wrangler | Unlimited 80th Anniversary |
| 2021 | Jeep | Wrangler | Unlimited Freedom |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude 4xe |
| 2022 | Jeep | Wrangler | Unlimited High Tide |
| 2021 | Jeep | Wrangler | Unlimited Islander |
| 2018-2019 | Jeep | Wrangler | Unlimited Moab |
| 2018-2022 | Jeep | Wrangler | Unlimited Rubicon |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 392 |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 4xe |
| 2018-2022 | Jeep | Wrangler | Unlimited Sahara |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara 4xe |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport |
| 2021-2022 | Jeep | Wrangler | Unlimited Sport Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport S |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys Sport |
| 2021-2024 | Jeep | Wrangler | Willys |
| 2023-2024 | Jeep | Wrangler | Willys 4xe |
| 2021-2024 | Jeep | Wrangler | Willys Sport |
$104.99
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2024 | Ford | Bronco | Badlands |
| 2021-2023 | Ford | Bronco | Base |
| 2021-2024 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2024 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2024 | Ford | Bronco | Outer Banks |
| 2022-2024 | Ford | Bronco | Raptor |
| 2021-2024 | Ford | Bronco | Wildtrak |
$224.99
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2023 | Ford | F-150 | King Ranch |
| 2015-2023 | Ford | F-150 | Lariat |
| 2016-2023 | Ford | F-150 | Limited |
| 2015-2023 | Ford | F-150 | Platinum |
| 2018-2023 | Ford | F-150 | Police Responder |
| 2017-2023 | Ford | F-150 | Raptor |
| 2016-2023 | Ford | F-150 | SSV |
| 2021-2023 | Ford | F-150 | Tremor |
| 2015-2023 | Ford | F-150 | XL |
| 2015-2023 | Ford | F-150 | XLT |
$134.99
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2024 | Ford | F-150 | King Ranch |
| 2021-2024 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2024 | Ford | F-150 | Platinum |
| 2021-2024 | Ford | F-150 | Police Responder |
| 2021-2024 | Ford | F-150 | Raptor |
| 2021-2024 | Ford | F-150 | SSV |
| 2024 | Ford | F-150 | STX |
| 2021-2024 | Ford | F-150 | Tremor |
| 2021-2024 | Ford | F-150 | XL |
| 2021-2024 | Ford | F-150 | XLT |
$68.99
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2022 | Ford | Bronco | Badlands |
| 2021-2022 | Ford | Bronco | Base |
| 2021-2022 | Ford | Bronco | Big Bend |
| 2021-2022 | Ford | Bronco | Black Diamond |
| 2022 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2021-2022 | Ford | Bronco | Outer Banks |
| 2022 | Ford | Bronco | Raptor |
| 2021-2022 | Ford | Bronco | Wildtrak |
$134.99
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2024 | Ford | Bronco | Badlands |
| 2021-2023 | Ford | Bronco | Base |
| 2021-2024 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2024 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2024 | Ford | Bronco | Outer Banks |
| 2022-2024 | Ford | Bronco | Raptor |
| 2021-2024 | Ford | Bronco | Wildtrak |
$71.99
DV8 Offroad's A-Pillar Dual Light Pod Drop Mounts give the Ford Bronco two lighting positions on each side. Each mount carries up to two 3-inch light pods, one on top for forward or angled lighting and one lower on a drop bracket for side ditch lighting on dark trails.
Two pods per side. The upper mounting point suits forward-facing or angled pods. The drop mounting point works for forward-facing or side scene lighting.
Light without the glare. The drop-down design lights the sides of the trail without throwing glare onto the hood, and the low-profile brackets keep the pods out of your sightline.
Antenna and flag provisions. Each side has a 9/16 inch diameter optional mount for an antenna or whip flag.
Simple bolt-on install. The brackets use the factory accessory mounting location and hardware. Minor wiring is needed for the lights, and DV8 estimates about 30 minutes to install. They are cut from 3.5mm steel plate with a micro-texture black powder coat.
Features
- Mounts up to two 3-inch light pods at each A-pillar
- Drop-down design for side scene lighting without hood glare
- Two 9/16 inch optional antenna or whip mounts
- Uses the factory accessory mounting location and hardware
- Low-profile design
- 3.5mm steel plate with micro-texture black powder coat
- Fully bolt-on installation
Prop 65. This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Fitment: Fits the 2022-2026 Ford Bronco Raptor, and the Ford Bronco 2021-2026. DV8 Offroad's application list covers the 2021-2026 Ford Bronco and does not exclude the Raptor. Fitment confirmed against DV8 Offroad's published application list.
Guides & Manuals
CatalogThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Ford | Bronco | Raptor |
| 2021-2026 | Ford | Bronco | All trims |
$206.99
DV8 Offroad designed this tubular bull bar as a lower-profile alternative to the OEM bull bar on the Ford Bronco's factory HD modular steel bumper. It sits noticeably lower in front of the grille than the factory piece, which gives the front end a cleaner look while still adding a place to mount lights.
Two adjustable light mounts. The tube carries two reversible mounts, so you can place up to a 20-inch light bar above or below the bar, or run a pod light on each of the two tabs. DV8 points out that Elite Light Bar Rail Mounts are required for a light bar and are sold separately.
Strong, simple construction. The mounting plates are 3mm steel and the bar itself is 1.5-inch diameter tubing with 1.5mm walls. A dual-stage micro-texture black powder coat protects it from rust. The bar weighs about 15 pounds, and lights are not included.
Quick bolt-on install. The bar bolts to the eight accessory mounts already on the steel bumper, and DV8 puts the job at about half an hour. Its low position keeps the effect on the front camera view small.
Pairs with DV8 pocket mounts. DV8 suggests running it alongside its Factory Bumper Pocket Light Mounts for a complete lighting setup.
Features
- Tubular bull bar for the factory HD modular steel bumper
- Low-profile position in front of the grille
- Two adjustable, reversible light mounts
- Fits up to a 20-inch light bar or a pod light on each tab
- 3mm steel plates with 1.5-inch tubing
- Dual-stage micro-texture black powder coat
- Direct fit, bolt-on installation with factory hardware locations
Prop 65. WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Fitment: Fits the 2022-2026 Ford Bronco Raptor and the Ford Bronco 2021-2026. DV8 Offroad's published application list covers the 2021-2026 Ford Bronco and does not exclude the Raptor. This bull bar fits the factory HD Modular Steel Bumper only; it does not fit the factory plastic bumper or the Capable bumper. Fitment confirmed against DV8 Offroad's published application list.
Guides & Manuals
Installation InstructionsInstallation Instructions (supplier copy)
Catalog
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | Bronco | All trims (factory HD Modular Steel Bumper only) |
| 2022-2026 | Ford | Bronco | Raptor (factory HD Modular Steel Bumper only) |
$116.99
These A-pillar pod light mounts give the Ford Bronco Raptor a clean, factory-looking place to carry auxiliary lighting right at the base of the windshield. DV8 Offroad shaped them to follow the molded-in-color trim on the A-pillar, so the finished install looks like it left the factory that way and keeps the Bronco bodyline intact.
Flexible light layouts. Each mount offers three mounting locations. You can run two 3-inch pod lights per side, three 2-inch pods, or one larger 4 to 6-inch round light. DV8 tested pods up to 6 inches across, and they work as forward-facing driving lights or as ditch lights angled toward the trail edge.
Built to last. The mounts are cut from 3mm steel and finished in a micro-texture black powder coat that resists rust. The kit is a pair, one mount for each side. Lights and wiring are not included.
Simple, bolt-on install. The brackets fit directly onto the factory accessory mount locations and use the original hardware, so no drilling or cutting is needed. An opening in each mount lets you keep the factory radio antenna in place.
Features
- Pair of A-pillar light mounts, driver and passenger side
- Holds up to (2) 3-inch pods, (3) 2-inch pods, or one 4-6 inch pod per mount
- Three light mounting locations on each mount
- Micro-texture black powder coat over 3mm steel, about 5 lbs
- Styled to match the OEM trim
- Uses factory hardware at the OEM accessory mount locations
- Retains the factory antenna
- Lights not included
Prop 65. WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA), which are known to the State of California to cause cancer and birth defects or other reproductive harm. More information: www.P65Warnings.ca.gov.
Fitment: DV8 Offroad lists this mount as a direct fit to the OEM accessory mounts on the 2021-2026 Ford Bronco in the Base, Big Bend, Black Diamond, Outer Banks, Badlands, Wildtrak, First Edition and Raptor trims. The Bronco Raptor is a 2022-2026 model, so the Raptor fit runs 2022-2026. Fitment confirmed against DV8 Offroad's published application list.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Ford | Bronco | Raptor |
| 2021-2026 | Ford | Bronco | Base, Big Bend, Black Diamond, Outer Banks, Badlands, Wildtrak, First Edition |
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.