Welcome to RaptorsOnly.com
-
Brands
Shop by brand
- 3D MAXpider
- Access
- Addictive Desert Designs
- Advan
- AEM Induction
- aFe
- Air Lift
- Airaid
- Alcon
- AlphaRex
- AMP Research
- AMS
- Anderson Composites
- ANZO
- ARB
- Atturo Tire
- AutoMeter
- AVS
- AWE Tuning
- BackRack
- Baer Brakes
- Baja Designs
- BAK
- Banks Power
- BBK
- BBS
- BD Diesel
- Belltech
- Bestop
- BFGoodrich
- BMC
- Body Armor 4x4
- Borla
- Brembo
- Brembo OE
- Bully Dog
- Bushwacker
- Camburg
- Clevite
- COBB
- Cometic Gasket
- COMP Cams
- CORSA Performance
- Covercraft
- CSF
- DBA
- DeatschWerks
- DFC
- Diode Dynamics
- DS18
- DV8 Offroad
- Eaton
- EBC
- Eibach
- Enkei
- Extang
- Fabtech
- Fel-Pro
- fifteen52
- Firestone
- Flowmaster
- Ford Racing
- Forgestar
- FORM Lighting
- FOX
- Garrett
- Gates
- GEN-Y Hitch
- Go Fast Bits
- Go Rhino
- Gram Lights
- Granatelli Motor Sports
- GSC Power Division
- Hawk Performance
- Hella
- Hellwig
- Hotchkis
- Husky Liners
- ICON
- Injen
- J&L
- JBA
- JLT
- K&N Engineering
- KC HiLiTES
- King Engine Bearings
- King Shocks
- Kleinn Air Horns
- Kooks Headers
- KYB
- LIQUI MOLY
- LUND
- Magnaflow
- Mahle OE
- Maxtrac
- Mayhem
- MBRP
- McGard
- Method Wheels
- MGP
- Michelin
- Mickey Thompson
- Mishimoto
- Moog
- Motul
- MTX Wheels
- N-Fab
- Nacho Offroad Technology
- NGK
- Nitrous Express
- Odyssey Battery
- ORACLE Lighting
- PowerStop
- Putco
- QA1
- Raceline
- Radium Engineering
- Rally Armor
- Rampage
- Raxiom
- Retrax
- Rhino-Rack
- Ridetech
- Rigid Industries
- Rival 4x4
- RockJock
- Roll-N-Lock
- Roush
- Royal Purple
- SCT Performance
- Skyjacker
- Snow Performance
- SPC Performance
- SPOD
- Stainless Works
- Superlift
- Superpro
- Timbren
- Torque Solution
- TOYO
- Truxedo
- Tuff Country
- Turbosmart
- UMI Performance
- Undercover
- Volant
- Vossen
- Wagner Tuning
- WeatherTech
- Weld
- Westin
- Whiteline
- Wilwood
- Yokohama Tire
- Yukon Gear & Axle
- Zone Offroad
No brands found. Try another name or initial.
156 brands
View all brands -
F-150 Raptor
- F-150 Raptor
-
1st Gen (2010-2014)
-
2nd Gen (2017-2020)
-
3rd Gen (2021-Present)
-
Raptor R (2023-Present)
-
Bronco Raptor
- Bronco Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
-
Ranger Raptor
- Ranger Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
Your cart
Subheading
Product comparison
Describe you product comparison grid
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
70 products
70 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$396.99
It’s time to transform your Bronco into a premium ride that is with our Luminix DRLs that replace the factory hood handles. Fits Ford Bronco. This missing touch of sleek elegance that your ride needs it’s just a simple upgrade away. Packed with numerous custom start-up sequences, turn signals, and the ability to choose white or amber colors to match your style seamlessly. You can easily install them within 30 minutes as they are a direct bolt-on replacement with an easy Plug-N-Play connection directly into the headlight harness. Programming them is a breeze with the “tap-to-ground” feature, allowing you to select your preferred start-up sequence, turn signal, and color or DRL (Amber or White). These DRLs are designed by Putco Inc. in Des Moines, Iowa, and come with Putco’s 3-Year Warranty on Luminix™ Products, so you can be confident in their durability and quality. Upgrade your Ford Bronco today with our LED DRLs and experience the premium touch you’ve been missing!
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | Bronco | Badlands |
| 2021-2023,2025 | Ford | Bronco | Base |
| 2021-2025 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2025 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2025 | Ford | Bronco | Outer Banks |
| 2022-2025 | Ford | Bronco | Raptor |
| 2025 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
$262.99
Get ready for the next generation in DRL and approach lighting (at night) for the front end of your truck. The Putco Virtual Blade™ LED Grille Lights are specifically designed to give your truck the most premium of looks and high-end design you could ask for. These lights are equipped with fully sequential scanning lights powered by high-powered LEDs that are visible day and night as a solid beam of light. These lights can be activated the moment you unlock your door or start up your engine. Don’t settle for cheaper lights that will fail after just the first car wash, these Virtual Blades have the same best-in-class design as the original Blade, with LEDs that are fully encapsulated in a polycarbonate housing filled with resin giving them the best durability and against weatherproofing from water and any road debris.Can't find your vehicle on our application guide? Don't worry, you can order the same product in the Light Bar size you need!, they are available in 37", 32", 15" Pairs, and 8" Pairs
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2026 | Chevrolet | Silverado 1500 | Custom |
| 2019-2026 | Chevrolet | Silverado 1500 | Custom Trail Boss |
| 2019-2026 | Chevrolet | Silverado 1500 | High Country |
| 2019-2026 | Chevrolet | Silverado 1500 | LT |
| 2019-2026 | Chevrolet | Silverado 1500 | LT Trail Boss |
| 2019-2026 | Chevrolet | Silverado 1500 | LTZ |
| 2023-2026 | Chevrolet | Silverado 1500 | PPV |
| 2019-2026 | Chevrolet | Silverado 1500 | RST |
| 2019-2021 | Chevrolet | Silverado 1500 | SSV |
| 2019-2026 | Chevrolet | Silverado 1500 | WT |
| 2022-2026 | Chevrolet | Silverado 1500 | ZR2 |
| 2020-2025 | Chevrolet | Silverado 2500 HD | Custom |
| 2020-2025 | Chevrolet | Silverado 2500 HD | High Country |
| 2020-2025 | Chevrolet | Silverado 2500 HD | LT |
| 2020-2025 | Chevrolet | Silverado 2500 HD | LTZ |
| 2020-2025 | Chevrolet | Silverado 2500 HD | WT |
| 2024-2025 | Chevrolet | Silverado 2500 HD | ZR2 |
| 2020-2025 | Chevrolet | Silverado 3500 HD | High Country |
| 2020-2025 | Chevrolet | Silverado 3500 HD | LT |
| 2020-2025 | Chevrolet | Silverado 3500 HD | LTZ |
| 2020-2025 | Chevrolet | Silverado 3500 HD | WT |
| 2021-2025 | Ford | F-150 | King Ranch |
| 2021-2025 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2025 | Ford | F-150 | Platinum |
| 2021-2025 | Ford | F-150 | Police Responder |
| 2021-2025 | Ford | F-150 | Raptor |
| 2021-2025 | Ford | F-150 | SSV |
| 2024-2025 | Ford | F-150 | STX |
| 2021-2025 | Ford | F-150 | Tremor |
| 2021-2025 | Ford | F-150 | XL |
| 2021-2025 | Ford | F-150 | XLT |
| 2017-2023 | Ford | F-250 Super Duty | King Ranch |
| 2017-2023 | Ford | F-250 Super Duty | Lariat |
| 2018-2023 | Ford | F-250 Super Duty | Limited |
| 2017-2023 | Ford | F-250 Super Duty | Platinum |
| 2017-2023 | Ford | F-250 Super Duty | XL |
| 2017-2023 | Ford | F-250 Super Duty | XLT |
| 2017-2023 | Ford | F-350 Super Duty | King Ranch |
| 2017-2023 | Ford | F-350 Super Duty | Lariat |
| 2018-2023 | Ford | F-350 Super Duty | Limited |
| 2017-2023 | Ford | F-350 Super Duty | Platinum |
| 2017-2023 | Ford | F-350 Super Duty | XL |
| 2017-2023 | Ford | F-350 Super Duty | XLT |
| 2019-2026 | GMC | Sierra 1500 | AT4 |
| 2022-2026 | GMC | Sierra 1500 | AT4X |
| 2019-2021 | GMC | Sierra 1500 | Base |
| 2019-2026 | GMC | Sierra 1500 | Denali |
| 2022-2026 | GMC | Sierra 1500 | Denali Ultimate |
| 2019-2026 | GMC | Sierra 1500 | Elevation |
| 2022-2026 | GMC | Sierra 1500 | Pro |
| 2019-2026 | GMC | Sierra 1500 | SLE |
| 2019-2026 | GMC | Sierra 1500 | SLT |
| 2020-2025 | GMC | Sierra 2500 HD | AT4 |
| 2024-2025 | GMC | Sierra 2500 HD | AT4X |
| 2020-2021 | GMC | Sierra 2500 HD | Base |
| 2020-2025 | GMC | Sierra 2500 HD | Denali |
| 2024-2025 | GMC | Sierra 2500 HD | Denali Ultimate |
| 2022-2025 | GMC | Sierra 2500 HD | Pro |
| 2020-2025 | GMC | Sierra 2500 HD | SLE |
| 2020-2025 | GMC | Sierra 2500 HD | SLT |
| 2020-2025 | GMC | Sierra 3500 HD | AT4 |
| 2020-2021 | GMC | Sierra 3500 HD | Base |
| 2020-2025 | GMC | Sierra 3500 HD | Denali |
| 2024-2025 | GMC | Sierra 3500 HD | Denali Ultimate |
| 2022-2025 | GMC | Sierra 3500 HD | Pro |
| 2020-2025 | GMC | Sierra 3500 HD | SLE |
| 2020-2025 | GMC | Sierra 3500 HD | SLT |
| 2022-2025 | Toyota | Tundra | 1794 Edition |
| 2022-2025 | Toyota | Tundra | Capstone |
| 2022-2025 | Toyota | Tundra | Limited |
| 2022-2025 | Toyota | Tundra | Platinum |
| 2022-2025 | Toyota | Tundra | SR |
| 2022-2025 | Toyota | Tundra | SR5 |
| 2022-2025 | Toyota | Tundra | TRD Pro |
$761.95
The Baja Designs XL Sport A-Pillar LED Light Kit (part 448058) adds a pair of high-output auxiliary pods to the A-pillars of your 2021-2026 Ford F-150 Raptor. It is built for night trail driving, where the stock headlights leave blind spots to the sides and the pods fill them with usable light.
Ditch and distance lighting in one kit. Each XL Sport pod puts out 3,162 raw lumens at 5000K daylight color. The driving/combo clear lens covers lighting zones 1, 2 and 3 and reaches into zone 4, so you see the edge of the trail and well down it. The kit also includes spare spot and wide cornering lens kits, so you can change the pattern to suit the way you drive.
Mounts to the factory A-pillar points. The powder-coated brackets bolt to the factory mounting locations with the supplied stainless steel hardware, and Baja Designs says no drilling or vehicle modification is needed. The brackets let you adjust the aim for forward or ditch lighting. Position the pods so they do not block hood prop rod access.
Built to take trail abuse. The housings are cast aluminum with a hard-coated polycarbonate lens. Baja Designs lists IP69K water and pressure-wash resistance, IK10 impact compliance, MIL-STD-810G testing, built-in overvoltage protection and an average rated life of 49,930 hours. uService replaceable lenses and optics, ClearView optics, MoistureBlock sealing and DirectSink thermal management are part of the XL Sport design.
Features
- Manufacturer part number: 448058
- Pods: 2 XL Sport LED lights, Driving/Combo, clear lens
- Also included: 2 A-pillar mounting brackets, 1 trigger switch harness (640180), 2 XL spot lens kits, 2 XL wide cornering lens kits, all mounting hardware
- Light output: 3,162 raw lumens per pod, 5000K
- Electrical draw: 30.36 W and 2.2 A per pod
- Pod size: 4.43 x 4.43 x 3.65 in, 2.45 lb each
- Protection: IP69K, IK10, MIL-STD-810G
- Backed by Baja Designs' 30-day money-back guarantee and limited lifetime warranty
Emissions and warnings. Baja Designs lists a California Proposition 65 warning for this product (cancer and reproductive harm, www.P65Warnings.ca.gov). It is an off-road auxiliary light; check your local laws before using it on public roads.
Fitment: Baja Designs lists this kit for the Ford F-150 Raptor 2021-2026, the Raptor 37 2024-2026 and the Raptor R 2024-2026. Fitment confirmed against Baja Designs' published application list.
Guides & Manuals
Baja Designs 448058 Installation Sheet
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2024-2026 | Ford | F-150 | Raptor 37 |
| 2024-2026 | Ford | F-150 | Raptor R |
$1,020.95
The Baja Designs XL80 A-Pillar Light Kit (part 448060) is a bolt-on auxiliary lighting package for the 2021-2026 Ford F-150 Raptor, including the 2024-2026 Raptor 37 and Raptor R. It puts two XL80 LED pods on vehicle-specific brackets at the base of the windshield, so you get far more light along the trail edges and into turns than the factory headlights alone provide.
Built for the Raptor's A-pillar. The two included A-pillar brackets are made for this truck and use the existing cowl mounting locations, so the pods sit where ditch lights belong without cutting or drilling the body.
Wide, usable light. Each XL80 is rated at 9,022 raw lumens (75.9 W, 5.5 A) at 5000K daylight color. The pods ship in a Driving/Combo pattern, and the kit also includes clear spot and clear wide cornering lens kits, so you can change the beam to suit your terrain, from reaching down the trail to flooding the corners.
Hardware and wiring included. A trigger switch harness (part 640180) and stainless steel mounting hardware come in the box. Wiring and final aiming are part of the install, and the kit ships as individual components that you assemble on the truck.
Tough, serviceable construction. The XL80 uses a hard-anodized, powder-coated cast aluminum housing, a hard-coated polycarbonate lens, and Baja Designs' uService replaceable lenses and optics, ClearView lighting control, MoistureBlock sealing and DirectSink thermal management. It is rated IP69K (dust-tight, pressure-washable, waterproof to 9 ft), IK10 impact rated, and tested beyond MIL-STD-810G. Baja Designs backs the kit with a limited lifetime warranty and a 30-day satisfaction guarantee.
Features
- Part number: 448060
- Two XL80 LED pods, Driving/Combo, clear lens
- Two vehicle-specific A-pillar mounting brackets
- Trigger switch harness 640180
- Two clear spot lens kits and two clear wide cornering lens kits
- Stainless steel mounting hardware
- 9,022 raw lumens, 75.9 W, 5.5 A per light
- Pod size about 4.4 in x 4.4 in x 3.65 in deep
- 5000K daylight color
- Cree LED, built-in overvoltage protection
Emissions and warnings. Prop 65: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. See www.P65Warnings.ca.gov.
Fitment: Baja Designs lists this kit for the 2021-2026 Ford F-150 Raptor, the 2024-2026 F-150 Raptor 37 and the 2024-2026 F-150 Raptor R. Fitment confirmed against Baja Designs' published application list.
Guides & Manuals
Baja Designs 448060 Installation SheetThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2024-2026 | Ford | F-150 | Raptor 37 |
| 2024-2026 | Ford | F-150 | Raptor R |
$1,116.95
The Baja Designs LP4 Pro A-Pillar Light Kit adds a pair of high-output LED pods to the A-pillars of a 2021-2026 Ford F-150 Raptor. It is a complete, vehicle-specific package: two LP4 Pro Driving/Combo lights with clear lenses, two A-pillar brackets, a trigger switch harness and all mounting hardware. Baja Designs states that no modifications to the truck are needed.
Light where the headlights stop. Pillar-mounted lights throw a wide pattern that fills in the blind spots beside the truck, helping you read turns, ruts and drop-offs on the trail. They also work as flood or scene lighting at a campsite or job site.
Forward reach plus side lighting. Each LP4 Pro produces 8,857 lumens, with 6,885 lumens projected forward and 1,972 lumens of dedicated peripheral light from Integrated Peripheral Technology (IPT) across zones 1 to 4. Baja Designs rates the combined spread at 200 degrees.
Built to stay cool and take abuse. Direct Ducted Cooling moves air across the rear heat sinks, and the powder-coat cast aluminum housing with hardcoated polycarbonate lens is rated IP69K for water, IK10 for impact and tested to MIL-STD810G durability. Lenses and optics are replaceable through Baja Designs' uService design.
Wired for the Raptor. The included harness is designed to work with the upfitter switches in Ford Raptors, so you can control the lights from the factory switch panel.
Features
- (2x) LP4 Pro Driving/Combo LED light pods, clear lens, 5000K daylight output
- (2x) A-pillar mounting brackets with stainless steel mounting hardware
- (1x) Trigger switch harness (part 640180) for the Raptor upfitter switches
- 75.9 W and 5.5 A per light, with built-in overvoltage protection
- Backlight running mode, adjustable aim, DT06-4S Deutsch connectors
- Limited Lifetime Warranty and 30-day satisfaction guarantee from Baja Designs
Emissions and compliance. California Proposition 65 warning applies to this product: Cancer and Reproductive Harm, www.P65Warnings.ca.gov. Baja Designs notes that some lighting products may only be used when off-roading, and the buyer is responsible for using them in line with local laws.
Fitment: Baja Designs lists the F-150 Raptor 2021-2026, the F-150 Raptor 37 2024-2026 and the F-150 Raptor R 2024-2026. Fitment confirmed against Baja Designs' published application list.
Guides & Manuals
Baja Designs 448068 Installation SheetThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2024-2026 | Ford | F-150 | Raptor 37 |
| 2024-2026 | Ford | F-150 | Raptor R |
$384.95
Fits 2017-2021 Ford F-150 Raptor.
This Baja Designs A-pillar light kit mounts auxiliary Squadron Sport LED pods at the base of the windshield in the hood ditch position, giving you forward lighting where the factory headlights leave a dark gap. It is a bolt-on setup for the factory hood hinge/A-pillar mounting points, so no cutting or drilling is required.
The kit is built around Baja Designs' off-road lighting hardware and includes a spot beam pattern with a clear lens. The housings are black powder-coated cast aluminum, the bezels are cast aluminum, the front lenses are hard-coated polycarbonate, and the brackets and mounting hardware are stainless steel. Baja Designs also calls out uService replaceable lenses and optical components, ClearView optical distribution, MoistureBlock sealing, CopperDrive circuitry, DirectSink thermal management, and built-in overvoltage protection.
- MPN: 447680
- Vehicle fitment: 2017-2021 Ford F-150 Raptor
- Mounting position: A-pillar / hood ditch
- Beam pattern: Spot
- Lens color: Clear
- Housing color: Black
- Light pod size: 3 in square; 3.07 in H x 2.77 in D x 3.07 in W
- Per-pod weight: 12 oz
- LED count: 4 LEDs per pod
- Operating voltage: 9-36V DC
- Rated life: 49,930 hours average
- Waterproof rating: IP69K
- Impact rating: IK10 compliant
- Environmental durability: exceeds MIL-STD810G
- Color temperature: 5000K daylight
The box includes two Squadron Sport LED light pods, two vehicle-specific A-pillar mounting brackets, a wiring harness, and stainless steel mounting hardware. The harness type is described differently by retailers, but it is supplied as the wiring harness needed to complete the install. Wiring is straightforward on the truck, but the exact access steps, wrench sizes, and torque specs are vehicle-dependent and were not provided on the product page. As with most hood-hinge light mounts, plan to aim the pods after installation so the spot pattern lands where you want it on the road or trail.
Baja Designs' published output figures also vary by source for this part number, so the safe details to rely on are the fitment, beam pattern, construction, and included hardware above.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2021 | Ford | F-150 | Raptor |
$679.99
The RIGID 360-Series Spot A-Pillar Kit mounts a pair of 4-inch round 360-Series lights on the A-pillars of a 2021-2027 Ford F-150 Raptor or Raptor R, using vehicle-specific brackets, so you add premium trail lighting with a factory-style look.
Spot output with a colored backlight. The 360-Series pairs a strong forward spot beam with an RGBW backlight, so the lights can add a custom accent as well as throw light down the trail. It is the efficient pick of this group, drawing 2 amps at 14 volts.
Built for a clean install. The kit ships with vehicle-specific A-pillar brackets, mounting hardware, and a wiring harness and switch (no relay is included). Rigid publishes one installation sheet for the F-150 and F-150 Raptor A-pillar kits, linked below, so you can review the steps first.
Rated and measured. Rigid lists the pair at 28 watts and 3,060 raw lumens, with a 9V to 36V operating range and a 16.5 by 15.7 degree spot beam.
Features
- Pair of RIGID 4-inch 360-Series Spot LED lights with RGBW backlight
- Vehicle-specific black A-pillar brackets and mounting hardware
- Wiring harness and switch included (no relay)
- 9V to 36V operating range, 28 watts, 3,060 raw lumens, 2 amps at 14 volts
- Spot beam pattern, 16.5 degree horizontal by 15.7 degree vertical
- Pod light shape, A-pillar mount type
Compliance. Rigid's page carries the California Proposition 65 notice for this product; read it on the maker's page before you buy.
Fitment. Rigid Industries lists this kit as fitting 2021-2027 Ford F-150 and F-150 Raptor. For the Raptor R that applies from its 2023 model year. Fitment confirmed against Rigid Industries' published application list.
Guides & Manuals
I-Sheet Ford F-150/Raptor A-Pillar KitThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2027 | Ford | F-150 | Raptor |
| 2023-2027 | Ford | F-150 | Raptor R |
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | Police Responder |
| 2021-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
$839.99
The RIGID D-XL Spot A-Pillar Kit mounts a pair of high-output D-XL pod lights to the A-pillars of a 2021-2027 Ford F-150 Raptor or Raptor R, with brackets made for this truck, so you can add serious forward lighting without improvising a mount.
Maximum forward projection. The D-XL is the brightest pod in this group of A-pillar kits. Rigid designed it for distance, and its spot pattern reaches well down trails, back roads and open terrain, giving you more time to read obstacles when you are moving quickly.
Built for a clean install. The kit ships with vehicle-specific A-pillar brackets, mounting hardware, vibration isolators and a wiring harness and switch with relay. Rigid publishes one installation sheet for the F-150 and F-150 Raptor A-pillar kits, linked below, so you can review the steps first.
Rated and measured. Rigid lists the pair at 68 watts, 7,128 raw lumens and 4.86 amps at 14 volts, with a 9V to 36V operating range and a 16.5 by 16.6 degree spot beam.
Features
- Pair of RIGID D-XL Spot LED pod lights
- Vehicle-specific black A-pillar brackets and mounting hardware
- Wiring harness and switch with relay, plus vibration isolators
- 9V to 36V operating range, 68 watts, 7,128 raw lumens, 4.86 amps at 14 volts
- Spot beam pattern, 16.5 degree horizontal by 16.6 degree vertical
- Pod light shape, A-pillar mount type
Compliance. Rigid's page carries the California Proposition 65 notice for this product; read it on the maker's page before you buy.
Fitment. Rigid Industries lists this kit as fitting 2021-2027 Ford F-150 and F-150 Raptor. For the Raptor R that applies from its 2023 model year. Fitment confirmed against Rigid Industries' published application list.
Guides & Manuals
I-Sheet Ford F-150/Raptor A-Pillar KitThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2027 | Ford | F-150 | Raptor |
| 2023-2027 | Ford | F-150 | Raptor R |
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | Police Responder |
| 2021-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
$639.99
The RIGID D-SS Spot A-Pillar Kit puts a pair of 4-inch side-shooter pod lights on the A-pillars of a 2021-2027 Ford F-150 Raptor or Raptor R, using brackets made for this truck, so you gain trail lighting without drilling up the body or cutting into the factory look.
Peripheral light where you need it. The D-SS pod throws a side-emitting 180 degree beam in addition to its forward spot, which lights the edges of the trail, ditches and the corners you are about to turn into. Mounted at the A-pillar, the lights sit close to your line of sight, so the glare stays out of the hood and windshield.
Built for a clean install. The kit ships with vehicle-specific A-pillar brackets, mounting hardware, a wiring harness and a switch (no relay is included). Rigid publishes a single installation sheet for the F-150 and F-150 Raptor A-pillar kits, linked below, so you can review the steps before you start.
Rated and measured. Rigid lists the pair at 45 watts, 5,544 raw lumens and 3.21 amps at 14 volts, with a 9V to 36V operating range and a 17.3 by 16 degree spot beam.
Features
- Pair of RIGID D-SS Spot LED pod lights with a side-emitting 180 degree beam
- Vehicle-specific black A-pillar brackets and mounting hardware
- Wiring harness and switch included (no relay)
- 9V to 36V operating range, 45 watts, 5,544 raw lumens, 3.21 amps at 14 volts
- Spot beam pattern, 17.3 degree horizontal by 16 degree vertical
- Pod light shape, A-pillar mount type
Compliance. Rigid's page carries the California Proposition 65 notice for this product; read it on the maker's page before you buy.
Fitment. Rigid Industries lists this kit as fitting 2021-2027 Ford F-150 and F-150 Raptor. For the Raptor R that applies from its 2023 model year. Fitment confirmed against Rigid Industries' published application list.
Guides & Manuals
I-Sheet Ford F-150/Raptor A-Pillar KitThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2027 | Ford | F-150 | Raptor |
| 2023-2027 | Ford | F-150 | Raptor R |
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | Police Responder |
| 2021-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
$2,045.95
The Baja Designs 6XL Linkable bumper kit (part 448314) is a complete front-bumper lighting package built for the 2024-2026 Ford F-150 Raptor and Raptor R. It puts a six-module LED light bar low on the front end, where it adds a wide, forward-projecting wash of light without throwing glare back off the hood.
Six independently adjustable light modules. Baja Designs' XL Linkable design gives each module its own horizontal adjustment, so the bar can run straight or follow an arc that matches the lines of the Raptor bumper. Each module, or the whole bar together, offers 45 degrees of vertical pitch adjustment.
Smooth, balanced coverage. The bar mixes several lens patterns so zones 1, 2, 3 and 4 are lit at the same time instead of leaving dark gaps between a hot spot and the sides. Baja Designs lists the Pro version at 24,570 total raw lumens (the Sport version at 18,972) with 5000K Daylight color temperature, which is easier on the eyes on long night runs.
Built for dirt, water and dust. The housings use DirectSink thermal management, MoistureBlock sealing against rain and submersion, and uService replaceable lenses and optics, so a scratched lens can be swapped instead of replacing the whole light.
Made to fit the Raptor. The kit includes Raptor R/37 specific mounting brackets, so the bar sits where it should on the bumper. The wiring harness (part 640163) arrives fully crimped and trimmed for a cleaner install, and black rock guards are included to protect the lenses when the lights are off.
Features
- 6XL Linkable LED light bar, Pro configuration (24,570 raw lumens)
- Independent horizontal adjustment per light; 45 degrees of vertical pitch
- Two bumper mounting brackets made for the Raptor R/37
- Pre-crimped wiring harness, part 640163
- Black rock guards and all necessary mounting hardware
- 5000K Daylight output
- 30-day satisfaction guarantee and limited lifetime warranty from Baja Designs
Emissions and safety. California Proposition 65 warning applies: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm (www.P65Warnings.ca.gov).
Fitment: Baja Designs lists this kit for the 2024-2026 Ford F-150 Raptor R and Raptor 37. Baja Designs also notes on its page that the kit fits the 2024-2025 Raptor R and 37 trucks, so confirm your model year with us if you have a 2026. Fitment confirmed against Baja Designs' published application list.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | F-150 | Raptor |
| 2024-2026 | Ford | F-150 | Raptor R |
$756.95
The Baja Designs Squadron Sport Sportsmen Dual Fog Pocket Light Kit (part number 447847) is Baja Designs' dedicated lighting kit for the 2010-2014 Ford F-150 SVT Raptor. It swaps the stock bumper fog lights for two Squadron Sport LED pods per side, four pods in total, so the truck gets a serious lighting upgrade without drilling or fabricating a bumper.
Built for the SVT Raptor fog pockets. Baja Designs designed this kit specifically for the first-generation SVT Raptor. The two included mounting brackets hold the pods in the factory front bumper fog light openings, and the kit ships with the hardware needed to install them.
Spot and driving combo patterns for near and far coverage. The kit pairs two Spot pods with two Driving Combo pods, all with clear lenses. The Spot pattern is a narrow 9-degree beam for reach down the trail or road. The Driving Combo pattern blends 42-degree driving optics with 9-degree spot optics for wide, smooth coverage up close and distance beyond it. Together they cover lighting zones 1 through 4 in dust, fog, rain or snow.
Daylight-white output. Baja Designs lists 3,162 lumens and 30.36 W at 2.2 A for each Squadron Sport pod, with 5000K LEDs that give a natural, daylight-like color to help reduce driver fatigue and make terrain easier to read.
Wiring included. Two upfitter wiring harnesses (640093) and two 55-inch splitter harnesses (613606) are supplied, so each side can run both pods.
Features
- (2) Squadron Sport Spot Clear LED pods
- (2) Squadron Sport Driving Combo Clear LED pods
- (2) mounting brackets
- (2) upfitter wiring harnesses (640093)
- (2) 55-inch splitter harnesses (613606)
- All necessary mounting hardware
- uService replaceable lenses and optics
- ClearView optics
- MoistureBlock waterproof housing
- DirectSink direct thermal path cooling
- 30-day money-back guarantee and limited lifetime warranty
Prop 65. Baja Designs lists a California Proposition 65 warning for this product: Cancer and Reproductive Harm, www.P65Warnings.ca.gov.
Fitment: Baja Designs lists this kit for the 2010-2014 Ford F-150 SVT Raptor. Fitment confirmed against Baja Designs' published application list.
Guides & Manuals
Baja Designs 44-7847 Installation Sheet
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
$2,664.95
The Baja Designs XL Pro 8-Light Linkable LED Roof Bar Kit puts a full-width, adjustable light bar on the roof of your Bronco, including the Bronco Raptor, with the brackets, wiring and rock guards in one box. In the XL Pro form, Baja Designs rates the eight-light bar at 32,760 total lumens of forward-projecting light.
Light that covers the whole trail. The bar mixes lens patterns across its eight lights so zones 1, 2, 3 and 4 are lit at the same time. That gives a smooth, balanced spread instead of one hot spot, which helps when you are driving at night over rough ground.
Aim every light, or the whole bar. Each light has 45 degrees of vertical pitch adjustment, and you can also tilt the entire bar. Horizontal adjustment is independent per light, so you can set the bar straight or in an arc that follows the roofline of your Bronco.
Built to be added to. The wiring comes fully crimped and trimmed, so installation is simpler and you can add links to the bar later. A pre-load support bracket is included to keep the bar stiff on rough trails, and black rock guards protect the lights when they are not in use.
Choose your wiring. Baja Designs supplies either a toggle harness or an upfitter harness for the Bronco. Note from Baja Designs: on the Bronco Raptor, the upfitter wiring has the AUX1 and AUX3 colors switched compared with the regular Bronco.
Features
- Eight-light XL Pro linkable LED bar, 32,760 total lumens
- Roof mounting brackets made for the Ford Bronco and Bronco Raptor
- 45 degrees of vertical pitch adjustment per light or for the whole unit
- Independent horizontal adjustment per light for straight or arc layouts
- Pre-load support kit included
- Eight black rock guards included
- Hard anodized and powder coated cast aluminum housings, hardcoated polycarbonate lenses
- IP69K water resistance, IK10 impact rating, tested beyond MIL-STD810G
Kit contents: one linkable light bar, two roof mounting brackets, one wiring harness (toggle or upfitter), one pre-load kit, eight black rock guards and all necessary mounting hardware.
Good to know. Baja Designs states that Bronco roof bar kits will not work with factory roof racks, and that any roof-mounted lights add some wind noise. Baja Designs backs the kit with a 30-day satisfaction guarantee and a limited lifetime warranty. California Proposition 65 warning: Cancer and Reproductive Harm, www.P65Warnings.ca.gov.
Fitment: Baja Designs lists this kit for the Ford Bronco and the Ford Bronco Raptor. Baja Designs shows the Bronco Raptor from 2021, but the Bronco Raptor was first built for 2022, so the table below shows 2022-2026. Fitment confirmed against Baja Designs' published application list.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | Bronco | Badlands |
| 2021-2023,2025-2026 | Ford | Bronco | Base |
| 2021-2026 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2026 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2026 | Ford | Bronco | Outer Banks |
| 2022-2026 | Ford | Bronco | Raptor |
| 2025-2026 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
Manufacturer part number: 447770
$386.95
The Baja Designs Squadron Sport 2.0 A-Pillar Kit puts two compact LED pods on the factory cowl and A-pillar position of the Ford Bronco and Bronco Raptor. This is the upfitter-harness version in a clear spot pattern, so it plugs into the truck's factory auxiliary switch wiring and gives you long-reach forward light without cutting or drilling.
Built for Bronco and Bronco Raptor. Baja Designs lists this kit for 2021-2026 Ford Bronco and 2022-2024 Ford Bronco Raptor. The vehicle-specific plates bolt to the factory mounting points and keep the pods tight to the body.
Brighter, cleaner beam. Each pod makes 3,200 lumens at 30W, a 35% gain over the previous Squadron Sport according to Baja Designs. The reworked optics throw the beam farther and wider with less spill, which helps on tight wooded trails, open desert and long night drives.
Easy aiming and lens changes. The redesigned bracket allows more vertical adjustment for aiming. Clip-in reflectors make lens swaps simple, and the kit includes clear driving-combo and clear wide-cornering lens kits so you can change the pattern.
Upfitter wiring. This kit includes the upfitter harness and a 55-inch 4-pin Deutsch splitter, so the lights tie into the truck's auxiliary switch wiring. Follow the installation sheet linked below when connecting.
Kit contents: two Squadron 2.0 Sport pods (clear, spot), two A-pillar plates, the upfitter harness, the Deutsch 4-pin 55-inch splitter, two clear driving-combo lens kits, two clear wide-cornering lens kits and all mounting hardware.
Features
- Two Squadron 2.0 Sport LED pods, clear lens, spot pattern
- 3,200 lumens and 30W per light (2.2A at 13.8V), 12-32V DC operation
- 5000K daylight color
- Selectable 9-color RGB backlight
- 4-pin Deutsch-style connector
- IP69K rated, MoistureBlock sealing, DirectSink thermal path
- uService replaceable lenses and optics with clip-in reflectors
- Bolt-on A-pillar plates, no cutting or drilling
- Limited Lifetime Warranty and 30-day satisfaction guarantee from Baja Designs
Emissions and warnings: California Proposition 65 warning applies: cancer and reproductive harm, www.P65Warnings.ca.gov. Baja Designs notes some products are for off-road use only, so follow your local lighting laws.
Fitment: Baja Designs lists this kit for 2021-2026 Ford Bronco and 2022-2024 Ford Bronco Raptor. Fitment confirmed against Baja Designs' published application list.
Guides & Manuals
Baja Designs 44-0088-UP Installation SheetThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | Bronco | All models |
| 2022-2024 | Ford | Bronco | Raptor |
$381.95
The Baja Designs Squadron 2.0 Sport A-Pillar LED Light Kit puts two compact, high-output spot pods on the A-pillars of your Ford Bronco or Bronco Raptor. It is a complete kit built around plates made for the Bronco, so the lights sit where they belong and aim down the trail without drilling a custom mount.
Next-generation optics. Each Squadron 2.0 Sport pod produces 3,200 lumens at 30 watts, which Baja Designs states is a 35 percent performance gain over the previous generation. The refined optical system throws a cleaner, farther and wider beam with less wasted spill, which helps on tight wooded trails, open desert and long night drives.
Adjustable bracket for precise aiming. The redesigned mounting bracket allows more vertical adjustment, so you can dial in the aim and widen your field of view to spot obstacles earlier.
Backlight, sealing and easy lens swaps. A new RGB backlight offers nine selectable colors. Clip-in reflectors keep the optics secure during lens changes under Baja Designs uService, and a redesigned gasket improves sealing. The pods are IP69K rated and use a durable 4-pin Deutsch-style connector.
Toggle switch harness included. This kit comes with the toggle switch 4-pin harness for simple on and off control from the cab, plus all necessary mounting hardware.
Features
- Two Squadron 2.0 Sport pods, clear lens, spot pattern
- 3,200 lumens and 30W (2.2A at 13.8V) per light
- Operating voltage 12-32V, IP69K rated
- Two A-pillar plates for the Ford Bronco
- Toggle switch 4-pin harness
- Two Squadron 2.0 lens kits, clear driving combo, and two lens kits, clear wide cornering
- Color-selectable backlight with 9 colors
- Backed by a 30-day satisfaction guarantee and a limited lifetime warranty
Emissions and warnings
California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. See www.P65Warnings.ca.gov. Buyers are responsible for using the lights in line with local laws; some lighting is intended for off-road use only.
Fitment: Baja Designs lists this kit for the Ford Bronco 2021-2026 and the Ford Bronco Raptor 2022-2024. Fitment confirmed against Baja Designs' published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | Bronco | Badlands |
| 2021-2023, 2025-2026 | Ford | Bronco | Base |
| 2021-2026 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2026 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2026 | Ford | Bronco | Outer Banks |
| 2022-2024 | Ford | Bronco | Raptor |
| 2025-2026 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
Manufacturer part number: 440088
$584.95
The Baja Designs Squadron Pro 2.0 A-Pillar Upfitter Spot Kit puts two compact LED pods on the windshield base of your Bronco Raptor, using the factory A-pillar mounting points. It is the upfitter-wired version of the kit, so it ties into the overhead upfitter switches already built into the truck.
Ditch-light placement that works on the trail. Mounted at the base of each A-pillar, the pods throw light down the road or trail edge and into the corners, where headlights leave dark spots. The pods come set up with clear spot lenses, and the kit includes clear driving combo and clear wide cornering lens kits so you can change the pattern later.
Built to take weather and abuse. Each Squadron 2.0 Pro pod has a powder-coated cast aluminum housing, a hardcoated polycarbonate lens, stainless steel hardware and a 4-pin Deutsch-style connector. Baja Designs lists IP69K protection, user-replaceable optics (uService), ClearView optics, MoistureBlock sealing and DirectSink cooling. The built-in backlight can be set to any of 9 colors.
Bolt-on install. The kit mounts at the factory A-pillar points with no cutting or drilling. Baja Designs notes that on the Bronco Raptor the factory upfitter wires for AUX1 and AUX3 have their colors swapped compared with other Broncos, and that the Squadron 2.0 Pro pods work on AUX1 through AUX2. Check the installation sheet below and verify each connection before final wiring.
Features
- 2 Squadron 2.0 Pro LED pods with clear spot lenses installed
- 2 A-pillar mounting plates
- 1 upfitter wiring harness and 1 Deutsch 4-pin 55 inch splitter
- 2 clear driving combo lens kits and 2 clear wide cornering lens kits
- Stainless steel mounting hardware
- 5,921 lumens, 65 watts and 4.7 amps per light at 13.8V DC
- 12V to 32V DC operating voltage
- 5000K daylight color temperature
Emissions and warnings: Baja Designs lists California Proposition 65: Cancer and Reproductive Harm, www.P65Warnings.ca.gov.
Fitment: Baja Designs lists this kit for the 2021-2026 Ford Bronco and the 2022-2024 Ford Bronco Raptor. Fitment confirmed against Baja Designs' published application list.
Guides & Manuals
Baja Designs 44-0087-UP Installation Sheet
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | Bronco | Badlands |
| 2021-2023, 2025-2026 | Ford | Bronco | Base |
| 2021-2026 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2026 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2026 | Ford | Bronco | Outer Banks |
| 2022-2024 | Ford | Bronco | Raptor |
| 2025-2026 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
$1,357.95
This Baja Designs fog pocket kit replaces the factory fog lamps on a steel-bumper Ford Bronco with a three-light-per-side lighting package: a road-legal amber S2 SAE fog light, an S2 Pro and a Squadron 2.0 Pro, all sized for the bumper's fog pockets. It is built for the Bronco platform, including the Bronco Raptor, and Baja Designs says it needs no additional parts to install.
Road-legal fog light on the factory switch. The S2 SAE is designed to meet SAE J583 fog lamp requirements and is run from the factory fog switch. Baja Designs rates it at 1,210 lumens per light and up to 5,712 candela (measured) at 12.42W, with aspheric projector optics and a sharp cutoff that suits dust, fog, rain and snow.
Trail lighting on the upfitter switches. For off-road use, the kit adds Squadron 2.0 Pro lights in spot and driving combo patterns, run from the Bronco's factory upfitter switches. Baja Designs lists the Squadron 2.0 Pro at 5,981 lumens and 65W per light and calls it a 21% increase in performance over the previous-generation Squadron, with new lens patterns, a 4-pin Deutsch connector and a user-selectable backlight with nine colors.
Serviceable and sealed. uService clip-in reflectors make lens swaps simple, and a redesigned gasket improves long-term sealing. Baja Designs notes that uService is not a feature of every SAE product and that tampering voids the warranty. The kit is backed by a 30 day satisfaction guarantee and a limited lifetime warranty that is valid only if the product is sent back for repair.
Features
- Amber S2 SAE fog lights, SAE J583 fog lamp design, 1,210 lumens each
- S2 Pro lights, 2,245 lumens and 23.46W each
- Squadron 2.0 Pro lights in spot and driving combo, 5,981 lumens and 65W each
- Steel-bumper fog pocket brackets and wiring harnesses included
- Complete kit, no additional parts required
Emissions and warnings
California Proposition 65 warning: Cancer and Reproductive Harm, www.P65Warnings.ca.gov.
Fitment: Baja Designs lists this kit for the 2021-2026 Ford Bronco and the 2022-2024 Bronco Raptor, for vehicles with the steel bumper. Fitment confirmed against Baja Designs' published application list.
Guides & Manuals
Baja Designs 44-0084-UP Installation SheetThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | Bronco | Badlands |
| 2021-2023,2025-2026 | Ford | Bronco | Base |
| 2021-2026 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2026 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2026 | Ford | Bronco | Outer Banks |
| 2022-2024 | Ford | Bronco | Raptor |
| 2025-2026 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
$1,167.95
This Baja Designs "Sportman" fog pocket kit drops a full set of auxiliary lighting into the factory fog pockets of a Ford Bronco or Bronco Raptor fitted with the steel bumper. It pairs road-legal S2 SAE fog lights with S2 Sport driving combo lights and Squadron 2.0 Sport spot lights, so one install covers dust and fog duty on the pavement and long-reach lighting on the trail.
Road-legal fog lighting that stays on the factory switch. The S2 SAE lights use aspheric projector optics and are designed to meet SAE J583 fog lamp requirements. They put out 1,210 lumens each at 12.42W, with a sharp cutoff, and are controlled by the factory fog switch.
Driving combo and spot lights for off-road distance. The S2 Sport lights add 1,581 lumens each, and the Squadron 2.0 Sport spot lights deliver 3,200 lumens each at 30W, a 35% performance increase over the previous Squadron according to Baja Designs. Updated lens patterns, a 4-pin Deutsch-style connector and a nine-color selectable backlight round out the Squadron 2.0.
Complete kit, nothing else to buy. Baja Designs states the kit includes everything for a quick install and needs no additional parts. The kit shown includes the fog pocket brackets, mounting brackets, splitter harnesses, extension harnesses and wiring harnesses. It is backed by a 30-day satisfaction guarantee and a limited lifetime warranty.
Features
- S2 SAE amber fog lights, 1,210 lumens each, SAE J583 fog lamp design
- S2 Sport driving combo lights, 1,581 lumens each
- Squadron 2.0 Sport spot lights, 3,200 lumens each at 30W
- uService replaceable lenses and optics, MoistureBlock waterproof sealing, DirectSink thermal path
- 5000K daylight output
- Fog pocket brackets for Bronco models with the steel bumper
Fitment: Baja Designs lists this steel bumper kit for the 2021-2026 Ford Bronco and the 2022-2024 Ford Bronco Raptor. Fitment confirmed against Baja Designs' published application list.
Emissions: California Proposition 65 warning applies: Cancer and Reproductive Harm, www.P65Warnings.ca.gov.
Guides & Manuals
Installation Instructions (44-0083-UP)This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | Bronco | Badlands |
| 2021-2023, 2025-2026 | Ford | Bronco | Base |
| 2021-2026 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2026 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2026 | Ford | Bronco | Outer Banks |
| 2022-2024 | Ford | Bronco | Raptor |
| 2025-2026 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
$1,197.95
The Baja Designs Squadron 2.0 Sport / S2 Sport / S2 SAE "Sportman" fog pocket kit is a complete six-light lighting package for the Ford Bronco Raptor with the factory steel bumper. Instead of bolting lights on top of the bumper, it fills the factory fog pocket with vehicle-specific brackets, so the lights sit where Ford intended and the front end keeps a clean look. Baja Designs lists the Bronco Raptor for 2022-2024 on this kit.
Three lights, two jobs. Each side gets an S2 SAE amber fog light, an S2 Sport driving/combo light and a Squadron 2.0 Sport spot light. The S2 SAE uses aspheric projector optics and a controlled fog pattern with a sharp cutoff. Baja Designs rates it at 1,210 lumens and up to 5,712 candela per light, and states it meets SAE J583 fog lamp requirements and runs from the factory fog switch. For the trail, the S2 Sport adds 1,581 lumens per light and the Squadron 2.0 Sport spot adds 3,200 lumens per light at 30W for long-distance reach.
Built for dust, rain and rough trails. Baja Designs lists black powder-coated aluminum housings, hard-coated polycarbonate lenses, Cree LED emitters, IP69K water and dust resistance, IK10 impact resistance and built-in overvoltage protection. The Squadron 2.0 Sport pods add a 4-pin Deutsch-style connector, a redesigned weather gasket, clip-in reflectors for simple lens swaps and a backlight with nine selectable colors.
Everything needed to install. The kit comes with steel bumper fog pocket mounting brackets, an on/off toggle wiring harness and stainless steel hardware, and Baja Designs states no additional parts are required. It is backed by a 30-day satisfaction guarantee and a Limited Lifetime Warranty. The S2 SAE housings are not meant to be opened; tampering voids the warranty, and SAE units must be returned to Baja Designs for repair.
Features
- Complete 6-light kit: 2 S2 SAE amber fog, 2 S2 Sport driving/combo, 2 Squadron 2.0 Sport spot
- Vehicle-specific steel bumper fog pocket brackets
- On/off toggle wiring harness and stainless steel mounting hardware
- 3,200 lumens per Squadron 2.0 Sport, 1,581 per S2 Sport, 1,210 per S2 SAE
- IP69K and IK10 rated, 49,930-hour LED life
- Made in the USA, San Marcos, CA
Emissions and compliance. Baja Designs states the S2 SAE fog lights comply with SAE J583. The Squadron 2.0 Sport and S2 Sport lights are for off-road use. California Proposition 65 warning: Cancer and Reproductive Harm, www.P65Warnings.ca.gov.
Fitment: Baja Designs lists the Ford Bronco 2021-2026 and the Ford Bronco Raptor 2022-2024, and the vehicle must have the factory Steel Bumper or Modular Steel Bumper. It does not fit Broncos with the standard plastic front bumper. Fitment confirmed against Baja Designs' published application list.
Guides & Manuals
Installation Instructions (44-0083)This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2024 | Ford | Bronco | Raptor |
| 2021-2026 | Ford | Bronco | With factory Steel Bumper or Modular Steel Bumper |
$558.95
The Baja Designs Squadron 2.0 Sport A-Pillar Light Kit adds a pair of compact LED ditch lights to your Ford Raptor, filling in the dark corners that the factory headlights leave behind on trails and back roads. Baja Designs engineered this kit specifically for the F-150 Raptor, including the Raptor 37 and Raptor R, so the brackets bolt to the A-pillar without cutting or drilling.
Light where the headlights miss. Mounted at the base of the windshield, A-pillar lights throw a wide angle of light to the sides of the truck. That helps you spot rocks, drop-offs and turns earlier, and it works as scene lighting at a campsite or job site.
Brighter than the last generation. Each Squadron 2.0 Sport pod puts out 3,200 raw lumens from 30W (2.2A), which Baja Designs rates as a 26% performance increase over the previous generation, with improved beam control and efficiency. The 5000K daylight color is easier on your eyes on long night runs.
Built to take weather. MoistureBlock construction and a redesigned gasket keep water and dust out, DirectSink moves heat away from the LEDs, and the 4-pin Deutsch connector gives a secure, weatherproof plug-in connection.
Easy to change and aim. uService clip-in reflectors make lens swaps simple, and the kit includes spot and wide cornering clear lens kits. A redesigned bracket gives more vertical adjustment so you can aim each pod to suit your truck's stance. An RGBW backlight offers nine selectable colors.
Features
- (2) Squadron 2.0 Sport LED lights, Driving/Combo pattern, clear lens
- (2) vehicle-specific A-pillar mounting brackets
- (1) upfitter harness and (1) 55-inch splitter harness
- (2) Squadron 2.0 spot clear lens kits and (2) wide cornering clear lens kits
- All necessary mounting hardware
- 3,200 lumens and 30W / 2.2A per light
- ClearView optics, DirectSink thermal path, MoistureBlock sealing, uService replaceable lenses
- 30-day money-back guarantee and limited lifetime warranty
Emissions: California Proposition 65 warning applies: Cancer and Reproductive Harm, www.P65Warnings.ca.gov.
Fitment: Baja Designs lists the Ford F-150 Raptor 2021-2026, the Raptor 37 2024-2026 and the Raptor R 2024-2026. Fitment confirmed against Baja Designs' published application list.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2024-2026 | Ford | F-150 | Raptor 37 |
| 2024-2026 | Ford | F-150 | Raptor R |
$737.95
The Baja Designs Squadron 2.0 Pro A-Pillar Light Kit adds a pair of wide-angle LED ditch lights to your Ford F-150 Raptor, so the trail edges and corners that the headlights miss stay lit at night. It is a complete two-light package with vehicle-specific brackets and wiring, built for the Raptor, Raptor 37 and Raptor R.
More light where headlights fall short. A-pillar (ditch) lights throw a wide beam out to the sides of the truck, filling in blind spots and helping you spot rocks, drop-offs and obstacles while you are navigating trails or turning into a corner. Each Squadron 2.0 Pro pod produces 5,921 lumens, which Baja Designs describes as a 21% increase over the previous generation, with improved beam control and efficiency.
Aim it where you need it. The newly engineered A-pillar bracket gives increased vertical adjustability, so you can dial in the aim for your driving and expand your field of view. The included upfitter harness and 55-inch splitter harness let you wire both lights into the truck without a ground-up wiring job.
Built to be serviced. The Squadron 2.0 Pro uses Baja Designs' uService design with clip-in reflectors for simple lens swaps, a redesigned gasket for improved sealing, a durable 4-pin Deutsch connector, and a user-selectable backlight with nine color choices. The kit ships with Driving/Combo clear lenses installed plus Spot clear and Wide Cornering clear lens kits, so you can change the pattern to suit the trail.
Features
- Two Squadron 2.0 Pro LED lights, Driving/Combo, clear
- Two A-pillar mounting brackets
- One upfitter harness and one 55-inch splitter harness
- Two Squadron 2.0 lens kits, Spot clear, and two lens kits, Wide Cornering clear
- All necessary mounting hardware
- 5,921 lumens per light, 65 watts and 4.7 amps per light
- Main light operating voltage 10V to 36V DC; backlight 11V to 14V DC
- 5000K daylight white light
- Nine-color selectable backlight
- IP69K rated; MoistureBlock waterproofing and DirectSink thermal path
- 4-pin Deutsch connector
- Manufacturer part number: 440021
Warranty. Baja Designs backs this kit with a limited lifetime warranty and a 30-day satisfaction guarantee.
Fitment: Baja Designs lists the Ford F-150 Raptor 2021-2026, the F-150 Raptor 37 2024-2026 and the F-150 Raptor R 2024-2026. Fitment confirmed against Baja Designs' published application list.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2024-2026 | Ford | F-150 | Raptor 37 |
| 2024-2026 | Ford | F-150 | Raptor R |
$1,747.95
The Baja Designs Squadron 2.0 Pro Behind-the-Grille Light Kit adds six LED auxiliary pods behind the factory grille of the 2021-2026 Ford F-150 Raptor and the 2024-2026 Raptor R, so you get serious forward lighting without changing the look of the front end. This multi-pattern kit uses clear lenses in three beam patterns to light the road ahead, the edges of the trail and the distance beyond.
Light where you need it. The kit pairs two Wide Cornering, two Driving Combo and two Spot pods. Together they cover lighting zones 1 through 4, from the shoulders of the trail to long-range spot reach, instead of relying on a single narrow beam.
Next-generation optics. Each Squadron 2.0 Pro pod produces 5,921 lumens at 65 watts, which Baja Designs states is a 21% increase over the previous generation. The refined optics push a cleaner, farther and wider beam while cutting unwanted spill, and the ClearView design keeps the light on the ground you are driving over.
Backlight in nine colors. Every pod has a user-selectable RGBW backlight with nine color choices, so you can match the glow behind the grille to your truck.
Built to survive the trail. Aluminum housings, MoistureBlock gaskets and an IP69K rating protect the pods from rain, mud and washdown. New clip-in reflectors keep the optics secure during lens changes, and the redesigned gasket improves long-term sealing. The brackets offer greater vertical adjustability so you can aim each pod where you want it.
Plug-in wiring. The kit includes a main wiring harness with a durable 4-pin Deutsch-style connector and an upfitter harness, so the lights can be tied into the factory Ford upfitter switches.
Backed by Baja Designs. The kit carries a 30-day money back guarantee and a limited lifetime warranty.
Features
- Six Squadron 2.0 Pro LED pods with clear lenses
- Two Wide Cornering, two Driving Combo and two Spot patterns
- 5,921 lumens and 65 watts (5.2 amps at 13.8V) per light
- 12-32V operating voltage
- RGBW backlight with 9 selectable colors
- Aluminum housings, ClearView optics, MoistureBlock sealing, IP69K rating
- Vehicle-specific behind-the-grille mounting brackets with vertical adjustment
- Includes primary wiring harness, upfitter wiring harness and all mounting hardware
What is in the box. Two Squadron 2.0 Pro Wide Cornering Clear pods, two Squadron 2.0 Pro Driving Combo Clear pods, two Squadron 2.0 Pro Spot Clear pods, two behind-the-grille mounting brackets, one wiring harness, one upfitter wiring harness and all necessary mounting hardware.
Emissions and warnings. This kit carries a California Proposition 65 warning (cancer and reproductive harm, www.P65Warnings.ca.gov). It is an auxiliary lighting kit intended for off-road use, and the buyer is responsible for using it in line with local laws.
Fitment: Baja Designs lists this kit for the 2021-2026 Ford F-150 Raptor, the 2024-2026 Ford F-150 Raptor 37 and the 2024-2026 Ford F-150 Raptor R. Baja Designs notes that the kit will not work with adaptive cruise control relocation kits. Fitment confirmed against Baja Designs' published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2024-2026 | Ford | F-150 | Raptor 37 |
| 2024-2026 | Ford | F-150 | Raptor R |
$1,167.95
The Baja Designs Squadron 2.0 Sport Behind-the-Grille Light Kit (44-0016) adds six LED auxiliary pods to the Ford F-150 Raptor without changing how the truck looks from the front. The pods sit out of sight behind the factory grille and light the road and trail ahead when you switch them on.
Built for the Raptor's grille. Baja Designs designed this kit for the 2021-2026 Ford F-150 Raptor, including the 2024-2026 Raptor 37 and Raptor R. It comes with two behind-the-grille mounting brackets and all the hardware, so the pods mount in the grille opening of your truck.
Light where you need it. The kit has two wide cornering pods, two driving combo pods and two spot pods, all with clear lenses. Together they put light into lighting zones 1 through 4, from close-in cornering to long-distance spot coverage. Each pod produces 3,200 lumens from 30 watts (2.2 amps at 13.8V), so the six-pod set totals 19,200 lumens.
Refined second-generation optics. The Squadron 2.0 Sport pods use redesigned optics that Baja Designs says give a cleaner, farther-reaching and wider beam with less wasted spill, and a 26% performance increase over the previous generation.
Easy tie-in to your upfitter switches. Besides the main wiring harness, the kit includes an upfitter harness so the lights can be wired to the factory upfitter switches. Note from Baja Designs: this kit will not work with adaptive cruise control relocation kits.
Backlight and serviceability. Each pod has a user-selectable RGBW backlight with nine color options. Baja Designs' uService design uses clip-in reflectors for secure lens swaps and a redesigned gasket for sealing against the weather.
- Six Squadron 2.0 Sport pods: 2 wide cornering clear, 2 driving combo clear, 2 spot clear
- 3,200 lumens and 30 W per pod (2.2 A at 13.8V); operating voltage 12-32V
- 5000K daylight color temperature
- RGBW backlight with 9 selectable colors
- IP69K rated
- Standard 4-pin Deutsch connector
- Redesigned mounting brackets with greater vertical adjustability
- MoistureBlock waterproof sealing and DirectSink direct thermal path
- Includes 2 behind-the-grille brackets, wiring harness, upfitter wiring harness and all necessary mounting hardware
Warranty and returns. Baja Designs backs the kit with a 30-day money-back satisfaction guarantee and a limited lifetime warranty.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Fitment: Baja Designs lists the Ford F-150 Raptor 2021-2026, the F-150 Raptor 37 2024-2026 and the F-150 Raptor R 2024-2026. Fitment confirmed against Baja Designs' published application list.
Guides & Manuals
Baja Designs 44-0016 Installation SheetThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2024-2026 | Ford | F-150 | Raptor 37 |
| 2024-2026 | Ford | F-150 | Raptor R |
$23.99
Axial's LED Puddle Lights are a simple and effective way to upgrade the exterior styling of your 2007-2014 F-150. These Axial Puddle Lights feature LEDs that are much brighter than the weak factory incandescent puddle lights for increased visibility on dark nights. Manufactured from OEM grade materials, these Puddle Lights are assembled to precise standards for long-lasting quality. These Puddle Lights feature durable, black abs plastic housings with multi-faceted clear polycarbonate lenses and modern LED lighting. Each light is weather-sealed to prevent dirt and moisture from harming the state of the art electronics found inside. Raxiom designed its LED Puddle Lights to be a direct plug and play upgrade for your F-150's original factory lights. There is absolutely no cutting, splicing or resistors required. Just pop out the old factory puddle light and disconnect the wiring harness. Plug the harness into the back of your new LED Puddle Lights and snap them in place of the old ones. It's that simple!
- Driver and Passenger Side Included
- Lighting Appearance Upgrade
- Clear Polycarbonate Lenses
- Black ABS Plastic Housings
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2007-2008,2010-2014 | Ford | F-150 | FX2 |
| 2007-2014 | Ford | F-150 | FX4 |
| 2007-2008,2010-2012 | Ford | F-150 | Harley-Davidson Edition |
| 2007-2014 | Ford | F-150 | King Ranch |
| 2007-2014 | Ford | F-150 | Lariat |
| 2011 | Ford | F-150 | Lariat Limited |
| 2008,2013-2014 | Ford | F-150 | Limited |
| 2009-2014 | Ford | F-150 | Platinum |
| 2007-2014 | Ford | F-150 | STX |
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2008 | Ford | F-150 | THE 60TH ANNIVERSARY EDITION |
| 2007-2014 | Ford | F-150 | XL |
| 2007-2014 | Ford | F-150 | XLT |
$44.99
The Raxiom Axial Series LED grille lights replace the factory marker lights in the grille of your 2010-2014 F-150 SVT Raptor or 2017-2020 F-150 Raptor. Bright LEDs behind smoked lenses give the front end a sharper, more modern look and better visibility.
Direct-replacement housings. Each light is built as a drop-in replacement for the original factory housing. The set includes 3 grille lights.
Weather-sealed construction. Black plastic housings with smoked lenses are sealed against dirt and moisture to protect the LED electronics inside.
Installation. The grille has to be removed to reach the lights. Raxiom lists the installation at under 2 hours.
Features
- Straightforward installation; grille removal required
- Smoked lenses with black plastic housings
- Super bright LED illumination
- Modern styling
- Includes 3 grille lights
Fitment: 2010-2014 Ford F-150 SVT Raptor and 2017-2020 Ford F-150 Raptor. Fitment confirmed against Raxiom's published application list.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
| 2010-2014 | Ford | F-150 | SVT Raptor |
$157.95
Baja Designs S1 Universal Hitch Light Kit adds a rear-facing LED work light to a standard 2-inch hitch receiver. It is built for reverse lighting and low-speed visibility when wired through the included 7-pin trailer adapter harness, so the light comes on with reverse on equipped vehicles.
This kit centers on a single S1 Wide Cornering LED light pod with a clear lens, a 2-inch hitch mount bracket, installation hardware, and the trailer-hitch adapter harness. Baja Designs lists the MPN as 448153. The housing uses aircraft-grade aluminum with a Mil-Spec hard anodized coating, and the compact pod measures 2.1 in. x 2.1 in. The light is rated at 2,320 lumens, 6.0 watts, and 1.40 amps with a Wide Cornering/Spread beam pattern.
Installation is straightforward for trucks and SUVs already equipped with a 7-pin trailer plug. The bracket slides into the 2-inch receiver, the harness ties into the trailer connector, and the light is ready for reverse-triggered operation. A locking hitch pin is not included and must be supplied separately. Baja Designs also notes that full-size or larger vehicles may require a 10 ft extension harness, part number 640165, for proper reach.
The unit ships as a hitch-mounted auxiliary light kit, not a bumper replacement or roof bar. It is designed around a 2-inch receiver, so that receiver size and a 7-pin trailer connection are the key requirements before ordering.
- MPN: 448153
- 1 S1 Wide Cornering LED light pod with clear lens
- 1 7-pin trailer hitch adapter harness
- 1 2-inch hitch mount bracket
- Installation hardware included
- Aircraft-grade aluminum housing with Mil-Spec hard anodized coating
- 2,320 lumens, 6.0 watts, 1.40 amps
- Wide Cornering / Spread beam pattern
- 2.1 in. x 2.1 in. square pod
- Requires a vehicle with a 7-pin trailer plug connector
- Locking hitch pin not included
- Full-size or larger vehicles may require Baja Designs extension harness 640165
Fits vehicles equipped with a standard 2-inch trailer hitch receiver. Supplier fitment includes: 1999 Ford F-250; 2004-2023 Ford F-150; 2007-2013 Chevrolet Avalanche; 2007-2013 Chevrolet Tahoe; 2007-2013 GMC Yukon; 2007-2018 Chevrolet Silverado 1500; 2007-2018 GMC Sierra 1500; 2007-2021 Toyota Tundra; 2009-2010 Dodge Ram 1500; 2010-2018 GMC Sierra 2500 HD; 2010-2018 GMC Sierra 3500 HD; 2011-2018 Ram 1500; 2011-2018 Ram 2500; 2011-2018 Ram 3500; 2015-2018 Chevrolet Colorado; 2015-2018 GMC Canyon; 2016 Nissan Titan XD; 2016-2023 Toyota 4Runner; 2016-2023 Toyota Tacoma; 2017-2019 Nissan Titan; 2018 Jeep Wrangler JK; 2019-2022 Ford Ranger; 2020-2022 Jeep Gladiator; 2021-2023 Ford Bronco.
Because this is a rear lighting kit, the reverse-triggered function depends on the vehicle's 7-pin trailer connector being present and correctly wired. If the vehicle does not have that connector, the kit cannot be used as intended without additional wiring.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013 | Chevrolet | Avalanche | Black Diamond LS |
| 2013 | Chevrolet | Avalanche | Black Diamond LT |
| 2013 | Chevrolet | Avalanche | Black Diamond LTZ |
| 2007-2012 | Chevrolet | Avalanche | LS |
| 2007-2012 | Chevrolet | Avalanche | LT |
| 2007-2012 | Chevrolet | Avalanche | LTZ |
| 2015-2018 | Chevrolet | Colorado | Base |
| 2015-2018 | Chevrolet | Colorado | LT |
| 2015-2018 | Chevrolet | Colorado | WT |
| 2015-2018 | Chevrolet | Colorado | Z71 |
| 2017-2018 | Chevrolet | Colorado | ZR2 |
| 2016-2018 | Chevrolet | Silverado 1500 | Custom |
| 2014-2018 | Chevrolet | Silverado 1500 | High Country |
| 2009-2013 | Chevrolet | Silverado 1500 | Hybrid |
| 2007-2013,2015-2018 | Chevrolet | Silverado 1500 | LS |
| 2007-2018 | Chevrolet | Silverado 1500 | LT |
| 2007-2018 | Chevrolet | Silverado 1500 | LTZ |
| 2015-2018 | Chevrolet | Silverado 1500 | SSV |
| 2007-2018 | Chevrolet | Silverado 1500 | WT |
| 2010-2013 | Chevrolet | Silverado 1500 | XFE |
| 2008-2013 | Chevrolet | Tahoe | Hybrid |
| 2007-2013 | Chevrolet | Tahoe | LS |
| 2007-2013 | Chevrolet | Tahoe | LT |
| 2007-2013 | Chevrolet | Tahoe | LTZ |
| 2007-2013 | Chevrolet | Tahoe | PPV |
| 2012-2013 | Chevrolet | Tahoe | SSV |
| 2009-2010 | Dodge | Ram 1500 | Laramie |
| 2009-2010 | Dodge | Ram 1500 | SLT |
| 2009-2010 | Dodge | Ram 1500 | Sport |
| 2009-2010 | Dodge | Ram 1500 | ST |
| 2009-2010 | Dodge | Ram 1500 | TRX |
| 2009-2010 | Dodge | Ram 1500 | TRX4 |
| 2021-2023 | Ford | Bronco | Badlands |
| 2021-2023 | Ford | Bronco | Base |
| 2021-2023 | Ford | Bronco | Big Bend |
| 2021-2023 | Ford | Bronco | Black Diamond |
| 2022-2023 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023 | Ford | Bronco | Heritage Edition |
| 2023 | Ford | Bronco | Heritage Limited Edition |
| 2021-2023 | Ford | Bronco | Outer Banks |
| 2022-2023 | Ford | Bronco | Raptor |
| 2021-2023 | Ford | Bronco | Wildtrak |
| 2007-2008,2010-2014 | Ford | F-150 | FX2 |
| 2004-2014 | Ford | F-150 | FX4 |
| 2006-2008,2010-2012 | Ford | F-150 | Harley-Davidson Edition |
| 2005-2023 | Ford | F-150 | King Ranch |
| 2004-2023 | Ford | F-150 | Lariat |
| 2011 | Ford | F-150 | Lariat Limited |
| 2008,2013-2014,2016-2023 | Ford | F-150 | Limited |
| 2009-2023 | Ford | F-150 | Platinum |
| 2018-2023 | Ford | F-150 | Police Responder |
| 2017-2023 | Ford | F-150 | Raptor |
| 2016-2023 | Ford | F-150 | SSV |
| 2004-2014 | Ford | F-150 | STX |
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2008 | Ford | F-150 | THE 60TH ANNIVERSARY EDITION |
| 2021-2023 | Ford | F-150 | Tremor |
| 2004-2023 | Ford | F-150 | XL |
| 2004-2023 | Ford | F-150 | XLT |
| 1999 | Ford | F-250 | Base |
| 1999 | Ford | F-250 | Lariat |
| 1999 | Ford | F-250 | XL |
| 1999 | Ford | F-250 | XLT |
| 2019-2022 | Ford | Ranger | Lariat |
| 2019-2022 | Ford | Ranger | XL |
| 2019-2022 | Ford | Ranger | XLT |
| 2018 | GMC | Canyon | All Terrain |
| 2015-2018 | GMC | Canyon | Base |
| 2017-2018 | GMC | Canyon | Denali |
| 2015-2018 | GMC | Canyon | SL |
| 2015-2018 | GMC | Canyon | SLE |
| 2015-2018 | GMC | Canyon | SLT |
| 2014-2018 | GMC | Sierra 1500 | Base |
| 2007-2018 | GMC | Sierra 1500 | Denali |
| 2009-2013 | GMC | Sierra 1500 | Hybrid |
| 2007-2013 | GMC | Sierra 1500 | SL |
| 2007-2018 | GMC | Sierra 1500 | SLE |
| 2007-2018 | GMC | Sierra 1500 | SLT |
| 2007-2013 | GMC | Sierra 1500 | WT |
| 2010-2013 | GMC | Sierra 1500 | XFE |
| 2015-2018 | GMC | Sierra 2500 HD | Base |
| 2011-2018 | GMC | Sierra 2500 HD | Denali |
| 2010-2018 | GMC | Sierra 2500 HD | SLE |
| 2010-2018 | GMC | Sierra 2500 HD | SLT |
| 2010-2014 | GMC | Sierra 2500 HD | WT |
| 2015-2018 | GMC | Sierra 3500 HD | Base |
| 2011-2018 | GMC | Sierra 3500 HD | Denali |
| 2010-2018 | GMC | Sierra 3500 HD | SLE |
| 2010-2018 | GMC | Sierra 3500 HD | SLT |
| 2010-2014 | GMC | Sierra 3500 HD | WT |
| 2007-2013 | GMC | Yukon | Denali |
| 2010-2013 | GMC | Yukon | Denali Hybrid |
| 2008-2013 | GMC | Yukon | Hybrid |
| 2007-2013 | GMC | Yukon | SLE |
| 2007-2013 | GMC | Yukon | SLT |
| 2021 | Jeep | Gladiator | 80th Anniversary |
| 2020,2022 | Jeep | Gladiator | Altitude |
| 2021-2022 | Jeep | Gladiator | High Altitude |
| 2020 | Jeep | Gladiator | Launch Edition |
| 2020-2022 | Jeep | Gladiator | Mojave |
| 2020-2022 | Jeep | Gladiator | Overland |
| 2020-2022 | Jeep | Gladiator | Rubicon |
| 2020-2022 | Jeep | Gladiator | Sport |
| 2020-2022 | Jeep | Gladiator | Sport S |
| 2021-2022 | Jeep | Gladiator | Texas Trail |
| 2021-2022 | Jeep | Gladiator | Willys |
| 2021-2022 | Jeep | Gladiator | Willys Sport |
| 2018 | Jeep | Wrangler JK | Rubicon |
| 2018 | Jeep | Wrangler JK | Sahara |
| 2018 | Jeep | Wrangler JK | Sport |
| 2018 | Jeep | Wrangler JK | Sport S |
| 2018 | Jeep | Wrangler JK | Unlimited Rubicon |
| 2018 | Jeep | Wrangler JK | Unlimited Sahara |
| 2018 | Jeep | Wrangler JK | Unlimited Sport |
| 2018 | Jeep | Wrangler JK | Unlimited Sport S |
| 2017-2019 | Nissan | TITAN | Platinum Reserve |
| 2017-2019 | Nissan | TITAN | PRO-4X |
| 2017-2019 | Nissan | TITAN | S |
| 2017-2019 | Nissan | TITAN | SL |
| 2017-2019 | Nissan | TITAN | SV |
| 2016 | Nissan | TITAN XD | Platinum Reserve |
| 2016 | Nissan | TITAN XD | PRO-4X |
| 2016 | Nissan | TITAN XD | S |
| 2016 | Nissan | TITAN XD | SL |
| 2016 | Nissan | TITAN XD | SV |
| 2011-2018 | Ram | 1500 | Big Horn |
| 2012-2018 | Ram | 1500 | Express |
| 2013-2018 | Ram | 1500 | HFE |
| 2011-2018 | Ram | 1500 | Laramie |
| 2014-2015 | Ram | 1500 | Laramie Limited |
| 2011-2018 | Ram | 1500 | Laramie Longhorn |
| 2015-2018 | Ram | 1500 | Limited |
| 2014-2018 | Ram | 1500 | Lone Star |
| 2011-2016 | Ram | 1500 | Outdoorsman |
| 2013 | Ram | 1500 | R/T |
| 2015-2018 | Ram | 1500 | Rebel |
| 2011-2018 | Ram | 1500 | SLT |
| 2014-2018 | Ram | 1500 | Special Service |
| 2011-2018 | Ram | 1500 | Sport |
| 2011-2012 | Ram | 1500 | ST |
| 2011-2018 | Ram | 1500 | Tradesman |
| 2012 | Ram | 1500 | Tradesman HD |
| 2013-2018 | Ram | 2500 | Big Horn |
| 2011-2018 | Ram | 2500 | Laramie |
| 2014-2015 | Ram | 2500 | Laramie Limited |
| 2011-2018 | Ram | 2500 | Laramie Longhorn |
| 2016-2018 | Ram | 2500 | Limited |
| 2013-2015 | Ram | 2500 | Lone Star |
| 2012-2016 | Ram | 2500 | Outdoorsman |
| 2011-2018 | Ram | 2500 | Power Wagon |
| 2011-2018 | Ram | 2500 | SLT |
| 2011-2013 | Ram | 2500 | ST |
| 2013-2018 | Ram | 2500 | Tradesman |
| 2013-2018 | Ram | 3500 | Big Horn |
| 2011-2018 | Ram | 3500 | Laramie |
| 2014-2015 | Ram | 3500 | Laramie Limited |
| 2011-2018 | Ram | 3500 | Laramie Longhorn |
| 2016-2018 | Ram | 3500 | Limited |
| 2013-2015,2017 | Ram | 3500 | Lone Star |
| 2011-2018 | Ram | 3500 | SLT |
| 2011-2013 | Ram | 3500 | ST |
| 2013-2018 | Ram | 3500 | Tradesman |
| 2023 | Toyota | 4Runner | 40th Anniversary Edition |
| 2016-2023 | Toyota | 4Runner | Limited |
| 2020-2021 | Toyota | 4Runner | Nightshade |
| 2016-2023 | Toyota | 4Runner | SR5 |
| 2018-2023 | Toyota | 4Runner | SR5 Premium |
| 2016,2021-2022 | Toyota | 4Runner | Trail |
| 2017-2023 | Toyota | 4Runner | TRD Off-Road |
| 2018-2023 | Toyota | 4Runner | TRD Off-Road Premium |
| 2016-2023 | Toyota | 4Runner | TRD Pro |
| 2022-2023 | Toyota | 4Runner | TRD Sport |
| 2020-2021 | Toyota | 4Runner | Venture |
| 2016-2023 | Toyota | Tacoma | Limited |
| 2016-2023 | Toyota | Tacoma | SR |
| 2016-2023 | Toyota | Tacoma | SR5 |
| 2021 | Toyota | Tacoma | Trail |
| 2023 | Toyota | Tacoma | Trail Special Edition |
| 2016-2023 | Toyota | Tacoma | TRD Off-Road |
| 2017-2023 | Toyota | Tacoma | TRD Pro |
| 2016-2023 | Toyota | Tacoma | TRD Sport |
| 2014-2021 | Toyota | Tundra | 1794 Edition |
| 2007-2013 | Toyota | Tundra | Base |
| 2007-2021 | Toyota | Tundra | Limited |
| 2021 | Toyota | Tundra | Nightshade |
| 2010-2021 | Toyota | Tundra | Platinum |
| 2014-2021 | Toyota | Tundra | SR |
| 2007-2011,2014-2021 | Toyota | Tundra | SR5 |
| 2021 | Toyota | Tundra | Trail |
| 2015-2017,2019-2021 | Toyota | Tundra | TRD Pro |
$350.95
The Baja Designs Universal Amber LED Rock Light Kit (part number 447056) adds low, even amber accent lighting under your Raptor: in the wheel wells, along the frame rails, in the engine bay or around the cab. It is a complete turnkey kit, so you do not need to buy extra wiring or work out how to pin a relay. All it needs is a 12 volt power source.
Complete kit, nothing to piece together. The kit includes four 400 lumen amber LED rock lights and a wiring harness with a switch. Baja Designs cut every lead to length so it reaches all four corners of a small to mid-sized vehicle, with some slack on each lead so you can route the wiring the way you want. On a full-size truck, plan your own routing and check the lead lengths before you mount the lights.
Wide, smooth light. Each light has a 180 degree optic with a black housing and amber lens, so it floods a wheel well or the ground beside the truck with a bright, smooth glow instead of a hot spot. Each pod is compact at 2.700 in long, 1.200 in high and 0.450 in deep, and weighs 0.113 lb, so it tucks into tight spots.
Built for dirt, water and trail use. The LED lights are waterproof and Baja Designs says they can be mounted almost anywhere. The kit is rated at 0.400 A, 5.520 W and 12 volts, so you only need a 12 volt source to run it.
Why it suits a Raptor. Rock lights do not depend on the body shape, so one kit covers the whole truck. Baja Designs lists this kit for the Ford F-150 from 2006 to 2021 without limiting it to certain trims, which includes the 2010-2014 SVT Raptor and the 2017-2021 F-150 Raptor. Amber light is a popular choice for a trail or campsite because it is warm, easy on night vision and shows up well in dust.
Features
- Four amber LED rock lights, 400 lumens each
- 180 degree beam pattern
- Black housing, amber lens, 2.700 x 1.200 x 0.450 in
- Waterproof construction
- 12 volt DC, 0.400 A amperage rating, 5.520 W
- Pre-cut wiring harness with switch included
- Rubber tube mounts
- Made in San Marcos, California, USA
Safety and emissions. The lights can get very hot when used for long periods, so let them cool before you handle or install them. Baja Designs carries a California Proposition 65 warning for this product (cancer and reproductive harm, www.P65Warnings.ca.gov). This is an off-road accent light kit; use it in line with the laws where you drive.
Fitment: Baja Designs sells this kit as a universal kit and lists it for the vehicles in the table below, including the Ford F-150 2006-2021 (all trims, which covers the SVT Raptor 2010-2014 and Raptor 2017-2021). It is not listed for the Raptor R, the Bronco Raptor or the Ranger Raptor. Fitment confirmed against Baja Designs' published application list.
Guides & Manuals
Baja Designs Rock Light Wiring Installation Sheet
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2017-2021 | Ford | F-150 | Raptor |
| 2006-2021 | Ford | F-150 | All trims |
| 1999-2021 | Ford | F-250 Super Duty | All trims |
| 1999-2021 | Ford | F-350 Super Duty | All trims |
| 2019-2021 | Ford | Ranger | All trims |
| 2007-2013 | Chevrolet | Avalanche | All trims |
| 2015-2019 | Chevrolet | Colorado | All trims |
| 2007-2021 | Chevrolet | Silverado 1500 | All trims |
| 2007-2021 | Chevrolet | Silverado 2500 HD | All trims |
| 2007-2021 | Chevrolet | Silverado 3500 HD | All trims |
| 2007-2013 | Chevrolet | Tahoe | All trims |
| 2009-2010 | Dodge | Ram 1500 | All trims |
| 2003-2010 | Dodge | Ram 2500 | All trims |
| 2003-2010 | Dodge | Ram 3500 | All trims |
| 2011-2021 | Ram | 1500 | All trims |
| 2019 | Ram | 1500 Classic | All trims |
| 2011-2021 | Ram | 2500 | All trims |
| 2011-2021 | Ram | 3500 | All trims |
| 2015-2019 | GMC | Canyon | All trims |
| 2007-2021 | GMC | Sierra 1500 | All trims |
| 2007-2021 | GMC | Sierra 2500 HD | All trims |
| 2007-2021 | GMC | Sierra 3500 HD | All trims |
| 2007-2013 | GMC | Yukon | All trims |
| 2020-2021 | Jeep | Gladiator | All trims |
| 2007-2018 | Jeep | Wrangler JK | All trims |
| 2018-2021 | Jeep | Wrangler JL | All trims |
| 2017-2018 | Nissan | Titan | All trims |
| 2016-2019 | Subaru | Crosstrek | All trims |
| 2014-2018 | Subaru | Forester | All trims |
| 2010-2012 | Subaru | Outback | All trims |
| 2013-2015 | Subaru | XV Crosstrek | All trims |
| 2010-2021 | Toyota | 4Runner | All trims |
| 2007-2014 | Toyota | FJ Cruiser | All trims |
| 2005-2021 | Toyota | Tacoma | All trims |
| 2007-2021 | Toyota | Tundra | All trims |
| 2020-2021 | Arctic Cat | Wildcat XX | Base |
| 2018-2019 | Textron | Wildcat XX | Base |
| 2019 | Textron | Wildcat XX LTD | Base |
| 2013-2016 | Can-Am | Maverick 1000R and Maverick Max 1000R variants | Base |
| 2017-2022 | Can-Am | Maverick X3 | Base |
| 2019-2021 | Honda | SXS10S2R Talon 1000R / SXS10S2X Talon 1000X (incl. FOX Live Valve) | Base |
| 2020-2021 | Honda | SXS10S4 Talon 1000X-4 (incl. FOX Live Valve) | Base |
| 2016-2021 | Yamaha | YXZ1000R (SE, SS, SS SE, SS XT-R) | Base |
| 2008-2021 | Polaris | General, Ranger, Ranger RZR, RZR and RZR XP/Turbo models (see Baja Designs' list for each exact model and year) | Base |
$313.99
Enhance the visual appeal of your Ford truck by replacing its standard blue factory front grille emblem with the newly introduced illuminated Ford LED oval emblem.These officially licensed, high-intensity Luminix™ Ford LED Front Grille Emblem feature Chip-On-Board LEDs that emit a brilliant white light with a high intensity of 6,500K. They also feature a captivating start-up sequence that commences the moment you start your engine. Installation is effortless, as these emblems seamlessly replace your original OEM emblem using the same mounting hardware. Additionally, the wiring features a Plug and Play wiring harness that directly integrates into the fuse box or the new quick-connect wiring harness (available for 2021 and newer models), which conveniently installs directly into the headlamp plug.Available for Ford F150, Super Duty, and Ranger, this new Luminix Ford LED Emblem will undoubtedly turn heads. It is officially licensed and patented, with a patent number of 11,371,688 B1.
- Withstand the elements: IP69K rated for high temperature and high water pressure. Putco’s LED emblem is injection molded, providing a UV-resistant and chipping-resistant construction that delivers a long-lasting performance.
- IP69K Rated: "IP" refers to the product’s ability to resist ingress of dust. In contrast, the "69K" refers to the product’s ability to resist ingress of high temperature (Steam) / high-pressure water.
- Camera Compatibility: The Putco Luminix Ford LED emblem fits directly into OEM post mounts and is fitted perfectly for easy installation, allowing full use of the camera and camera washing components.
- Head Turning Startup Sequence: Putco’s LED emblem begins illuminating with an eye-catching startup sequence at a 6,500K color temperature. The sequence starts upon engine ignition.
- State-of-the-art Manufacturing: Chip-on-board LEDs layout for a bright and crisp illumination day or night.
- Officially Licensed: Available for F150, Super Duty, Ranger, Maverick, Explorer, and Expedition!
- Matte Black Finish: UV-resilient and chip-resistant construction via injection molding.
- Stand Out Brightness: The lighted oval is rated 6,500K White LED output.
- Wiring: Easy Plug & Play with installation into the fuse box.
- Designed in the USA: Putco Inc., Des Moines, IA.
- PATENT 11,371,688 B1
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2025 | Ford | F-150 | King Ranch |
| 2024-2025 | Ford | F-150 | Lariat |
| 2024-2025 | Ford | F-150 | Platinum |
| 2024-2025 | Ford | F-150 | Police Responder |
| 2024-2025 | Ford | F-150 | Raptor |
| 2024-2025 | Ford | F-150 | SSV |
| 2024-2025 | Ford | F-150 | STX |
| 2024-2025 | Ford | F-150 | Tremor |
| 2024-2025 | Ford | F-150 | XL |
| 2024-2025 | Ford | F-150 | XLT |
$313.99
Enhance the visual appeal of your Ford truck by replacing its standard blue factory front grille emblem with the newly introduced illuminated Ford LED oval emblem.These officially licensed, high-intensity Luminix™ Ford LED Front Grille Emblem feature Chip-On-Board LEDs that emit a brilliant white light with a high intensity of 6,500K. They also feature a captivating start-up sequence that commences the moment you start your engine. Installation is effortless, as these emblems seamlessly replace your original OEM emblem using the same mounting hardware. Additionally, the wiring features a Plug and Play wiring harness that directly integrates into the fuse box or the new quick-connect wiring harness (available for 2021 and newer models), which conveniently installs directly into the headlamp plug.Available for Ford F150, Super Duty, and Ranger, this new Luminix Ford LED Emblem will undoubtedly turn heads. It is officially licensed and patented, with a patent number of 11,371,688 B1.
Installation Instructions- Withstand the elements: IP69K rated for high temperature and high water pressure. Putco’s LED emblem is injection molded, providing a UV-resistant and chipping-resistant construction that delivers a long-lasting performance.
- IP69K Rated: "IP" refers to the product’s ability to resist ingress of dust. In contrast, the "69K" refers to the product’s ability to resist ingress of high temperature (Steam) / high-pressure water.
- Camera Compatibility: The Putco Luminix Ford LED emblem fits directly into OEM post mounts and is fitted perfectly for easy installation, allowing full use of the camera and camera washing components.
- Head Turning Startup Sequence: Putco’s LED emblem begins illuminating with an eye-catching startup sequence at a 6,500K color temperature. The sequence starts upon engine ignition.
- Easy Installation: Putco's LED Emblem fits directly into OEM post mounts and is designed for a perfect fit, ensuring a headache-free installation.
- State-of-the-art Manufacturing: Chip-on-board LEDs layout for a bright and crisp illumination day or night.
- Matte Black Finish: UV-resilient and chip-resistant construction via injection molding.
- Stand Out Brightness: The lighted oval is rated 6,500K White LED output.
- Wiring: Easy Plug & Play with installation into the fuse box.
- Designed in the USA: Putco Inc., Des Moines, IA.
- PATENT 11,371,688 B1
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2025 | Ford | F-150 | King Ranch |
| 2023-2025 | Ford | F-150 | Lariat |
| 2023 | Ford | F-150 | Limited |
| 2023-2025 | Ford | F-150 | Platinum |
| 2023-2025 | Ford | F-150 | Police Responder |
| 2023-2025 | Ford | F-150 | Raptor |
| 2023-2025 | Ford | F-150 | SSV |
| 2024-2025 | Ford | F-150 | STX |
| 2023-2025 | Ford | F-150 | Tremor |
| 2023-2025 | Ford | F-150 | XL |
| 2023-2025 | Ford | F-150 | XLT |
| 2024-2025 | Ford | F-150 Lightning | Flash |
| 2023-2025 | Ford | F-150 Lightning | Lariat |
| 2023-2025 | Ford | F-150 Lightning | Platinum |
| 2023-2025 | Ford | F-150 Lightning | Pro |
| 2023-2025 | Ford | F-150 Lightning | Pro SSV |
| 2023-2025 | Ford | F-150 Lightning | XLT |
$313.99
Upgrade your Ford F-150, Ranger, or Super Duty with Putco's LUMINIX LED Ford Emblem, a direct replacement for your existing badge available for the front and rear of your pickup! This installment in the LUMINIX line of products seamlessly replaces the OEM Ford Emblems using the original mounts. Each emblem is designed to spec on the OEM badge, so Putco takes all cameras, sensors, and spray nozzles into account. Installation is quick and easy as all wiring is Plug-and-Play, routing directly to the fuse box. The iP69K rated emblem is tough and durable, designed to withstand the elements and provide a unique standard look to your vehicle. With this LED Emblem you can set your vehicle apart from the rest in no time in safety and style!Manufactured by Putco from Des Moines, IA
Warranty- Withstand the elements: IP69K rated for high temperature and high water pressure. Putco’s LED emblem is injection molded, providing a UV-resistant and chipping-resistant construction that delivers a long-lasting performance.
- IP69K Rated: "IP" refers to the product’s ability to resist ingress of dust. In contrast, the "69K" refers to the product’s ability to resist ingress of high temperature (Steam) / high-pressure water.
- Camera Compatibility: The Putco Luminix Ford LED emblem fits directly into OEM post mounts and is fitted perfectly for easy installation, allowing full use of the camera and camera washing components.
- Head Turning Startup Sequence: Putco’s LED emblem begins illuminating with an eye-catching startup sequence at a 6,500K color temperature. The sequence starts upon engine ignition.
- Easy Installation: Putco's LED Emblem fits directly into OEM post mounts and is designed for a perfect fit, ensuring a headache-free installation.
- State-of-the-art Manufacturing: Chip-on-board LEDs layout for a bright and crisp illumination day or night.
- Matte Black Finish: UV-resilient and chip-resistant construction via injection molding.
- Stand Out Brightness: The lighted oval is rated 6,500K White LED output.
- Wiring: Easy Plug & Play with installation into the fuse box.
- Designed in the USA: Putco Inc., Des Moines, IA.
- PATENT 11,371,688 B1
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | F-150 | King Ranch |
| 2021-2025 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2025 | Ford | F-150 | Platinum |
| 2021-2025 | Ford | F-150 | Police Responder |
| 2021-2025 | Ford | F-150 | Raptor |
| 2021-2025 | Ford | F-150 | SSV |
| 2024-2025 | Ford | F-150 | STX |
| 2021-2025 | Ford | F-150 | Tremor |
| 2021-2025 | Ford | F-150 | XL |
| 2021-2025 | Ford | F-150 | XLT |
| 2024-2025 | Ford | F-150 Lightning | Flash |
| 2022-2025 | Ford | F-150 Lightning | Lariat |
| 2022-2025 | Ford | F-150 Lightning | Platinum |
| 2022-2025 | Ford | F-150 Lightning | Pro |
| 2023-2025 | Ford | F-150 Lightning | Pro SSV |
| 2022-2025 | Ford | F-150 Lightning | XLT |
$313.99
Upgrade your Ford F-150, Ranger, or Super Duty with Putco's LUMINIX LED Ford Emblem, a direct replacement for your existing badge available for the front and rear of your pickup! This installment in the LUMINIX line of products seamlessly replaces the OEM Ford Emblems using the original mounts. Each emblem is designed to spec on the OEM badge, so Putco takes all cameras, sensors, and spray nozzles into account. Installation is quick and easy as all wiring is Plug-and-Play, routing directly to the fuse box. The iP69K rated emblem is tough and durable, designed to withstand the elements and provide a unique standard look to your vehicle. With this LED Emblem you can set your vehicle apart from the rest in no time in safety and style!Manufactured by Putco from Des Moines, IA
WarrantyInstallation Instructions
Installation Instructions
- Signature Start Up Sequence
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2025 | Ford | F-150 | King Ranch |
| 2015-2025 | Ford | F-150 | Lariat |
| 2016-2023 | Ford | F-150 | Limited |
| 2015-2025 | Ford | F-150 | Platinum |
| 2018-2025 | Ford | F-150 | Police Responder |
| 2017-2025 | Ford | F-150 | Raptor |
| 2016-2025 | Ford | F-150 | SSV |
| 2024-2025 | Ford | F-150 | STX |
| 2021-2025 | Ford | F-150 | Tremor |
| 2015-2025 | Ford | F-150 | XL |
| 2015-2025 | Ford | F-150 | XLT |
| 2023-2025 | Ford | F-250 Super Duty | King Ranch |
| 2023-2025 | Ford | F-250 Super Duty | Lariat |
| 2023-2024 | Ford | F-250 Super Duty | Limited |
| 2023-2025 | Ford | F-250 Super Duty | Platinum |
| 2023-2025 | Ford | F-250 Super Duty | XL |
| 2023-2025 | Ford | F-250 Super Duty | XLT |
$313.99
Upgrade your Ford F-150, Ranger, or Super Duty with Putco's LUMINIX LED Ford Emblem, a direct replacement for your existing badge available for the front and rear of your pickup! This installment in the LUMINIX line of products seamlessly replaces the OEM Ford Emblems using the original mounts. Each emblem is designed to spec on the OEM badge, so Putco takes all cameras, sensors, and spray nozzles into account. Installation is quick and easy as all wiring is Plug-and-Play, routing directly to the fuse box. The iP69K rated emblem is tough and durable, designed to withstand the elements and provide a unique standard look to your vehicle. With this LED Emblem you can set your vehicle apart from the rest in no time in safety and style!Manufactured by Putco from Des Moines, IA
Installation InstructionsWarranty
Installation Instructions
- Withstand the elements: IP69K rated for high temperature and high water pressure. Putco’s LED emblem is injection molded, providing a UV-resistant and chipping-resistant construction that delivers a long-lasting performance.
- IP69K Rated: "IP" refers to the product’s ability to resist ingress of dust. In contrast, the "69K" refers to the product’s ability to resist ingress of high temperature (Steam) / high-pressure water.
- Camera Compatibility: The Putco Luminix Ford LED emblem fits directly into OEM post mounts and is fitted perfectly for easy installation, allowing full use of the camera and camera washing components.
- Head Turning Startup Sequence: Putco’s LED emblem begins illuminating with an eye-catching startup sequence at a 6,500K color temperature. The sequence starts upon engine ignition.
- Easy Installation: Putco's LED Emblem fits directly into OEM post mounts and is designed for a perfect fit, ensuring a headache-free installation.
- State-of-the-art Manufacturing: Chip-on-board LEDs layout for a bright and crisp illumination day or night.
- Matte Black Finish: UV-resilient and chip-resistant construction via injection molding.
- Stand Out Brightness: The lighted oval is rated 6,500K White LED output.
- Wiring: Easy Plug & Play with installation into the fuse box.
- Designed in the USA: Putco Inc., Des Moines, IA.
- Signature Start Up Sequence
- PATENT 11,371,688 B1
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018-2025 | Ford | F-150 | King Ranch |
| 2018-2025 | Ford | F-150 | Lariat |
| 2018-2023 | Ford | F-150 | Limited |
| 2018-2025 | Ford | F-150 | Platinum |
| 2018-2025 | Ford | F-150 | Police Responder |
| 2018-2025 | Ford | F-150 | Raptor |
| 2018-2025 | Ford | F-150 | SSV |
| 2024-2025 | Ford | F-150 | STX |
| 2021-2025 | Ford | F-150 | Tremor |
| 2018-2025 | Ford | F-150 | XL |
| 2018-2025 | Ford | F-150 | XLT |
| 2024-2025 | Ford | F-150 Lightning | Flash |
| 2022-2025 | Ford | F-150 Lightning | Lariat |
| 2022-2025 | Ford | F-150 Lightning | Platinum |
| 2022-2025 | Ford | F-150 Lightning | Pro |
| 2023-2025 | Ford | F-150 Lightning | Pro SSV |
| 2022-2025 | Ford | F-150 Lightning | XLT |
$313.99
Upgrade your Ford F-150, Ranger, or Super Duty with Putco's LUMINIX LED Ford Emblem, a direct replacement for your existing badge available for the front and rear of your pickup! This installment in the LUMINIX line of products seamlessly replaces the OEM Ford Emblems using the original mounts. Each emblem is designed to spec on the OEM badge, so Putco takes all cameras, sensors, and spray nozzles into account. Installation is quick and easy as all wiring is Plug-and-Play, routing directly to the fuse box. The iP69K rated emblem is tough and durable, designed to withstand the elements and provide a unique standard look to your vehicle. With this LED Emblem you can set your vehicle apart from the rest in no time in safety and style!Manufactured by Putco from Des Moines, IA
Installation InstructionsWarranty
Installation Instructions
- Withstand the elements: IP69K rated for high temperature and high water pressure. Putco’s LED emblem is injection molded, providing a UV-resistant and chipping-resistant construction that delivers a long-lasting performance.
- IP69K Rated: "IP" refers to the product’s ability to resist ingress of dust. In contrast, the "69K" refers to the product’s ability to resist ingress of high temperature (Steam) / high-pressure water.
- Camera Compatibility: The Putco Luminix Ford LED emblem fits directly into OEM post mounts and is fitted perfectly for easy installation, allowing full use of the camera and camera washing components.
- Head Turning Startup Sequence: Putco’s LED emblem begins illuminating with an eye-catching startup sequence at a 6,500K color temperature. The sequence starts upon engine ignition.
- Easy Installation: Putco's LED Emblem fits directly into OEM post mounts and is designed for a perfect fit, ensuring a headache-free installation.
- State-of-the-art Manufacturing: Chip-on-board LEDs layout for a bright and crisp illumination day or night.
- Matte Black Finish: UV-resilient and chip-resistant construction via injection molding.
- Stand Out Brightness: The lighted oval is rated 6,500K White LED output.
- Wiring: Easy Plug & Play with installation into the fuse box.
- Designed in the USA: Putco Inc., Des Moines, IA.
- Signature Start Up Sequence
- PATENT 11,371,688 B1
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2020 | Ford | F-150 | King Ranch |
| 2015-2020 | Ford | F-150 | Lariat |
| 2016-2020 | Ford | F-150 | Limited |
| 2015-2020 | Ford | F-150 | Platinum |
| 2018-2020 | Ford | F-150 | Police Responder |
| 2017-2020 | Ford | F-150 | Raptor |
| 2016-2020 | Ford | F-150 | SSV |
| 2015-2020 | Ford | F-150 | XL |
| 2015-2020 | Ford | F-150 | XLT |
$23.99
Overview Introducing LED Puddle Lights from Form Lighting! If you are looking to add a modern appearance to your vehicle, upgrading your Puddle Lights is one of the easiest things you can do to make a big impact. Increased Output. Thanks to the full LED housings, these lamps provide a serious upgrade in output with 6000K Cool White LED chips. With these premium OE-grade replacements, you’ll stand out from the crowd with an extremely modern look. More Modern Appearance. On top of the output upgrade, these lamps are also an improvement in style. Incandescent yellow bulbs are a thing of the past, and our new Puddle Lights are here to help to bridge that gap. OEM-Grade Construction. Form Lighting Puddle Lights are built with quality in mind and constructed using OEM-grade materials, including a UV-coated polycarbonate lens, automotive-grade LEDs and optics, and direct-fit connectors. Unlike other options on the market, each lamp features transient protection which prevents voltage spikes on the circuit board, ensuring long-term reliability. While they may not be the cheapest option on the market, the fit and finish of our lamps are superior to other aftermarket units. Plug-and-Play. Our LED Puddle Lights are completely plug-and-play and will fit perfectly, without any body gaps. Simply take the factory housing out and reinstall. They were designed to plug into your factory connector, with no additional wiring needed. There are no errors, or flickering. Two-Year Warranty. All Form Lighting products are rigorously tested for reliability, and backed by a two-year warranty. The warranty is supported directly by Form Lighting’s US warehouse.
- Thanks to the full LED housings these lamps provide a serious upgrade in output with 6000K Cool White LED chips
- On top of the output upgrade these lamps are also an improvement in style
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2008-2014 | Ford | Edge | Limited |
| 2007-2018 | Ford | Edge | SE |
| 2007-2018 | Ford | Edge | SEL |
| 2007 | Ford | Edge | SEL Plus |
| 2009-2018 | Ford | Edge | Sport |
| 2015-2018 | Ford | Edge | Titanium |
| 2011-2019 | Ford | Explorer | Base |
| 2011-2019 | Ford | Explorer | Limited |
| 2016-2019 | Ford | Explorer | Platinum |
| 2013-2019 | Ford | Explorer | Sport |
| 2011-2019 | Ford | Explorer | XLT |
| 2007-2008,2010-2014 | Ford | F-150 | FX2 |
| 2007-2014 | Ford | F-150 | FX4 |
| 2007-2008,2010-2012 | Ford | F-150 | Harley-Davidson Edition |
| 2007-2014 | Ford | F-150 | King Ranch |
| 2007-2014 | Ford | F-150 | Lariat |
| 2011 | Ford | F-150 | Lariat Limited |
| 2008,2013-2014 | Ford | F-150 | Limited |
| 2009-2014 | Ford | F-150 | Platinum |
| 2007-2014 | Ford | F-150 | STX |
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2008 | Ford | F-150 | THE 60TH ANNIVERSARY EDITION |
| 2007-2014 | Ford | F-150 | XL |
| 2007-2014 | Ford | F-150 | XLT |
| 2009-2019 | Ford | Flex | Limited |
| 2009-2019 | Ford | Flex | SE |
| 2009-2019 | Ford | Flex | SEL |
| 2011-2012 | Ford | Flex | Titanium |
| 2017-2018 | Ford | Fusion | Energi Platinum |
| 2013-2018 | Ford | Fusion | Energi SE |
| 2013-2019 | Ford | Fusion | Energi Titanium |
| 2017-2018 | Ford | Fusion | Platinum |
| 2017-2018 | Ford | Fusion | Platinum Hybrid |
| 2013-2019 | Ford | Fusion | S |
| 2014-2018 | Ford | Fusion | S Hybrid |
| 2013-2019 | Ford | Fusion | SE |
| 2013-2019 | Ford | Fusion | SE Hybrid |
| 2019 | Ford | Fusion | SEL |
| 2019 | Ford | Fusion | SEL Hybrid |
| 2017-2019 | Ford | Fusion | Sport |
| 2013-2019 | Ford | Fusion | Titanium |
| 2013-2019 | Ford | Fusion | Titanium Hybrid |
| 2019-2022 | Ford | Ranger | Lariat |
| 2019-2022 | Ford | Ranger | XL |
| 2019-2022 | Ford | Ranger | XLT |
| 2008-2019 | Ford | Taurus | Limited |
| 2002-2004 | Ford | Taurus | LX |
| 2002-2007,2009-2019 | Ford | Taurus | SE |
| 2003 | Ford | Taurus | SE Comfort |
| 2002-2019 | Ford | Taurus | SEL |
| 2002-2004 | Ford | Taurus | SES |
| 2010-2019 | Ford | Taurus | SHO |
| 2009-2016 | Lincoln | MKS | Base |
| 2010-2016 | Lincoln | MKS | EcoBoost |
| 2010-2017,2019 | Lincoln | MKT | Base |
| 2010-2016 | Lincoln | MKT | EcoBoost |
| 2013-2019 | Lincoln | MKT | Limousine |
| 2012-2019 | Lincoln | MKT | Livery |
| 2018 | Lincoln | MKT | Premiere |
| 2018-2019 | Lincoln | MKT | Reserve |
| 2007-2015 | Lincoln | MKX | Base |
| 2008-2014 | Lincoln | Navigator | Base |
| 2008-2014 | Lincoln | Navigator | L |
| 2007 | Lincoln | Navigator | L Luxury |
| 2007 | Lincoln | Navigator | L Ultimate |
| 2007 | Lincoln | Navigator | Luxury |
| 2007 | Lincoln | Navigator | Ultimate |
| 2008-2009 | Mercury | Sable | Base |
| 2002-2005 | Mercury | Sable | GS |
| 2002-2003,2005 | Mercury | Sable | LS |
| 2002-2004 | Mercury | Sable | LS Premium |
| 2005 | Mercury | Sable | Platinum Edition |
| 2008-2009 | Mercury | Sable | Premier |
$1,715.95
The Baja Designs 6XL Linkable Kit (44-8308) is a complete bumper-mounted LED light bar package built for the 2024-2026 Ford F-150 Raptor R and Raptor 37. Six XL Sport pods are linked into one bar and ride on brackets made for these trucks, so the bar follows the lines of the factory bumper instead of sitting on a generic mount.
Light where you need it. The 6XL Sport version puts out 18,972 total lumens of forward light. Baja Designs mixes several lens patterns across the bar so zones 1, 2, 3 and 4 are lit at the same time, which gives a smooth, balanced beam rather than one hot spot.
Fully adjustable. Each pod pitches up to 45 degrees, individually or as a whole unit, and every pod has its own horizontal adjustment. That lets you run the bar straight or in an arc to match the front end of your truck.
Built to last. Baja Designs lists uService replaceable lenses and optics, MoistureBlock waterproof construction, DirectSink thermal management and a 5000K daylight color temperature that is easier on the eyes on long night runs. The wiring arrives fully crimped and trimmed, and black rock guards are included to protect the lenses when the lights are off.
Features
- 6XL Linkable LED light bar with six XL Sport pods, 18,972 total lumens
- 2 vehicle-specific mounting brackets for the Raptor R and Raptor 37
- Wiring harness 640163 and all necessary mounting hardware
- Black rock guards included
- 45 degrees of vertical pitch adjustment, independent horizontal adjustment per pod
- uService replaceable lenses and optics, MoistureBlock, DirectSink, 5000K daylight
- 30-day satisfaction guarantee and limited lifetime warranty from Baja Designs
Emissions and warnings. Baja Designs carries a California Proposition 65 notice on this product: Cancer and Reproductive Harm, www.P65Warnings.ca.gov. Baja Designs also notes that some of its lights are intended for off-road use only.
Fitment. Baja Designs' application list covers 2024-2026 Ford F-150 Raptor R and Raptor 37 trucks, although a note on its product page mentions 2024-2025 trucks only. Fitment confirmed against Baja Designs' published application list.
Guides & Manuals
Baja Designs 44-8308 Installation SheetThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | F-150 | Raptor R |
| 2024-2026 | Ford | F-150 | Raptor 37 |
$700.95
The Baja Designs S2 SAE Amber Dual Fog Pocket Light Kit (part 448171) swaps the factory bumper fog lights on a third-generation Ford F-150 Raptor for four compact S2 SAE LED pods with a warm amber beam. It is built as a direct bolt-in for the factory fog pockets, so a Raptor owner can upgrade the front end without cutting or modifying the bumper.
Amber light that cuts through dust and fog. Amber light scatters less in airborne dust, fog and rain than white light, which makes it a practical choice for slow desert runs and bad-weather driving. Baja Designs designs the S2 SAE to meet SAE J583 fog lamp requirements, with a controlled beam pattern and a sharp cutoff that keeps light low and out of oncoming drivers' eyes.
Projector optics and efficient LEDs. Each pod uses aspheric projector optics and advanced LED technology to put out about 1,210 lumens and a measured peak of up to 5,712 candela while drawing only 12.42 watts. Four pods per kit, two in each fog pocket, give the truck a lot more usable light than a single stock lamp per side.
Complete kit, no extra parts. The kit includes everything for a quick install: four S2 SAE amber spot lights, eight mounting brackets, two adapter harnesses and all necessary hardware. Baja Designs backs it with a 30-day satisfaction guarantee and a limited lifetime warranty.
Service note. uService user-serviceable lenses are not a feature of every SAE product. If the lights are opened or tampered with, the warranty is void, and the limited lifetime warranty is valid only if the product is sent back to Baja Designs for repair.
Features
- Four S2 SAE amber spot LED lights
- Eight mounting brackets and two adapter harnesses
- All necessary installation hardware included
- Designed to meet SAE J583 fog lamp requirements
- About 1,210 lumens, up to 5,712 candela (measured), 12.42 W per light
- Aspheric projector optics with a sharp cutoff
- Direct fit for the factory fog pockets, no bumper modifications
Emissions: Not applicable. This is a lighting product. California Proposition 65 warning: Cancer and Reproductive Harm, www.P65Warnings.ca.gov.
Fitment: Baja Designs lists the 2021-2026 Ford F-150 Raptor, the 2024-2026 F-150 Raptor 37 package and the 2024-2026 F-150 Raptor R. Baja Designs lists the Raptor R from 2024 for this kit, so the table starts the Raptor R at 2024. Fitment confirmed against Baja Designs' published application list.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2024-2026 | Ford | F-150 | Raptor 37 |
| 2024-2026 | Ford | F-150 | Raptor R |
$690.95
The Baja Designs S2 SAE Dual Fog Pocket Light Kit swaps the factory fog lamps in your Ford F-150 Raptor for four compact, road-legal LED fog pods. It is built to drop into the original fog pockets with plug-and-play adapter harnesses, so you get a cleaner, brighter low-level beam without cutting wires or modifying the truck.
Designed for poor-weather visibility. The S2 SAE pods use aspheric projector optics and are designed to meet SAE J583 fog lamp requirements. That gives a wide, controlled pattern with a sharp top cutoff, so the light lands on the road and trail surface in dust, fog, rain and snow instead of glaring back at oncoming drivers.
Real output from a small package. Baja Designs rates each pod at 1,210 lumens and up to 5,712 candela (measured) while drawing only 12.42 watts. Each pod has 2 LEDs, so the kit has 8 LEDs and 4,840 lumens in total. The housings are black aluminum with a clear lens and white light output.
Complete bolt-on kit. Four pods, eight mounting brackets, two adapter harnesses and all hardware are included, so no extra parts are needed. Baja Designs backs the kit with a limited lifetime warranty (valid when the lights are sent back to Baja for repair) and a 30-day satisfaction guarantee. The SAE line uses sealed pods and does not have the uService user-serviceable feature; opening a pod voids the warranty.
Installation. This is a novice-level job. Test-fit the brackets, route the harnesses cleanly and check that every pod lights before you reassemble the bumper. Baja Designs published no special tool sizes or torque specs for this kit, so follow the installation sheet below.
Features
- Manufacturer part number 448166 (clear lens)
- (4) S2 SAE LED light pods
- (8) mounting brackets
- (2) plug-and-play adapter harnesses and all necessary hardware
- Aspheric projector optics with a sharp fog cutoff
- 1,210 lumens and 5,712 candela per pod; 4,840 lumens total
- 12.42 watts per pod, 2 LEDs per pod
- 1.8 in. high x 2.9 in. wide per pod, black aluminum housing
- Limited lifetime warranty and 30-day satisfaction guarantee
Emissions and compliance. Designed to meet SAE J583 fog lamp requirements. California Proposition 65 warning applies to this product.
Fitment: Baja Designs lists the 2021-2026 Ford F-150 Raptor, including the Raptor 37 package from 2024-2026, and the 2024-2026 Ford F-150 Raptor R. Baja Designs starts the Raptor R at 2024, which is narrower than the 2023 start used on our Raptor R shelf, so check your exact year. Fitment confirmed against Baja Designs' published application list.
Guides & Manuals
Baja Designs 448166 Installation SheetThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2024-2026 | Ford | F-150 | Raptor 37 |
| 2024-2026 | Ford | F-150 | Raptor R |
$223.95
The Baja Designs S1 Hitch Light Kit adds a rear-facing LED work light that slides into a standard 2-inch receiver hitch and gives you manual, on-demand lighting behind the vehicle. Use it for backing up on dark trails, lighting a campsite, or adding a compact auxiliary work light where you need it most.
This kit uses a dedicated toggle switch wiring harness, so the light can be switched on independently and does not depend on reverse gear activation. It mounts in the hitch receiver without vehicle modifications. The included harness routes to the battery and cabin for switch placement.
Fits: 1999 Ford F-250; 2004-2023 Ford F-150; 2007-2013 Chevrolet Avalanche; 2007-2013 Chevrolet Tahoe; 2007-2013 GMC Yukon; 2007-2018 Chevrolet Silverado 1500; 2007-2018 GMC Sierra 1500; 2007-2021 Toyota Tundra; 2009-2010 Dodge Ram 1500; 2010-2018 GMC Sierra 2500 HD; 2010-2018 GMC Sierra 3500 HD; 2011-2018 Ram 1500; 2011-2018 Ram 2500; 2011-2018 Ram 3500; 2015-2018 Chevrolet Colorado; 2015-2018 GMC Canyon; 2016 Nissan Titan XD; 2016-2023 Toyota 4Runner; 2016-2023 Toyota Tacoma; 2017-2019 Nissan Titan; 2018 Jeep Wrangler JK; 2019-2022 Ford Ranger; 2020-2022 Jeep Gladiator; 2021-2023 Ford Bronco.
- Manufacturer part number: 448157
- 1 S1 LED pod
- 1 wide cornering clear LED light pod
- 1 hitch receiver mount bracket
- 1 toggle switch wiring harness
- 1 10-foot extension harness
- All necessary mounting hardware
- 2-inch hitch receiver installation
- Included harness requires routing from the rear hitch to the battery and cabin for switch placement
- Hitch pin is not included and must be sourced separately
- Baja Designs recommends the 10-foot extension harness, part number 640165, for full-size trucks or long-wheelbase SUVs where additional reach is needed
- Aircraft-grade cast aluminum housing with black Mil-Spec hard anodized finish
- Hard-coated polycarbonate lens
- Clear lens color
- Wide Cornering Clear beam pattern
- 2,320 lumens
- 6.0 watts
- 1.40 amps
- 12V DC system
- IP69K rating
- Rated for waterproof use up to 9 ft and high-pressure washing
- LED life expectancy: 49,930 hours
- Limited lifetime warranty
The kit arrives as a complete hitch-mounted lighting package with the pod, bracket, wiring harness, extension harness, and hardware. Because the wiring must be run to the battery and cabin, installation is straightforward but not just a simple slide-in job; plan on basic hand tools and time to route and secure the harness cleanly. Use a standard or locking hitch receiver pin, which is not included.
SKU 448153 is the 7-pin trailer adapter harness version sold separately for automatic reverse activation. This 448157 kit is the manual toggle switch version.
Check fitment before you order. Vehicle fitment can vary by trim, engine, drivetrain, cab or bed configuration, and factory options — confirm this part matches your specific vehicle. Fitment data is a guide, and we can't guarantee fitment on vehicles that aren't officially supported by the manufacturer. If you're unsure, get in touch before ordering. The vehicle table below is the supplier's own fitment data. It reflects the vehicle GENERATION rather than confirmed year-by-year fitment, so it can list a wider year range than this part actually covers. Check your exact year with us before ordering.
Fitment & Compatibility
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013 | Chevrolet | Avalanche | Black Diamond LS |
| 2013 | Chevrolet | Avalanche | Black Diamond LT |
| 2013 | Chevrolet | Avalanche | Black Diamond LTZ |
| 2007-2012 | Chevrolet | Avalanche | LS |
| 2007-2012 | Chevrolet | Avalanche | LT |
| 2007-2012 | Chevrolet | Avalanche | LTZ |
| 2015-2018 | Chevrolet | Colorado | Base |
| 2015-2018 | Chevrolet | Colorado | LT |
| 2015-2018 | Chevrolet | Colorado | WT |
| 2015-2018 | Chevrolet | Colorado | Z71 |
| 2017-2018 | Chevrolet | Colorado | ZR2 |
| 2016-2018 | Chevrolet | Silverado 1500 | Custom |
| 2014-2018 | Chevrolet | Silverado 1500 | High Country |
| 2009-2013 | Chevrolet | Silverado 1500 | Hybrid |
| 2007-2013,2015-2018 | Chevrolet | Silverado 1500 | LS |
| 2007-2018 | Chevrolet | Silverado 1500 | LT |
| 2007-2018 | Chevrolet | Silverado 1500 | LTZ |
| 2015-2018 | Chevrolet | Silverado 1500 | SSV |
| 2007-2018 | Chevrolet | Silverado 1500 | WT |
| 2010-2013 | Chevrolet | Silverado 1500 | XFE |
| 2008-2013 | Chevrolet | Tahoe | Hybrid |
| 2007-2013 | Chevrolet | Tahoe | LS |
| 2007-2013 | Chevrolet | Tahoe | LT |
| 2007-2013 | Chevrolet | Tahoe | LTZ |
| 2007-2013 | Chevrolet | Tahoe | PPV |
| 2012-2013 | Chevrolet | Tahoe | SSV |
| 2009-2010 | Dodge | Ram 1500 | Laramie |
| 2009-2010 | Dodge | Ram 1500 | SLT |
| 2009-2010 | Dodge | Ram 1500 | Sport |
| 2009-2010 | Dodge | Ram 1500 | ST |
| 2009-2010 | Dodge | Ram 1500 | TRX |
| 2009-2010 | Dodge | Ram 1500 | TRX4 |
| 2021-2023 | Ford | Bronco | Badlands |
| 2021-2023 | Ford | Bronco | Base |
| 2021-2023 | Ford | Bronco | Big Bend |
| 2021-2023 | Ford | Bronco | Black Diamond |
| 2022-2023 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023 | Ford | Bronco | Heritage Edition |
| 2023 | Ford | Bronco | Heritage Limited Edition |
| 2021-2023 | Ford | Bronco | Outer Banks |
| 2022-2023 | Ford | Bronco | Raptor |
| 2021-2023 | Ford | Bronco | Wildtrak |
| 2007-2008,2010-2014 | Ford | F-150 | FX2 |
| 2004-2014 | Ford | F-150 | FX4 |
| 2006-2008,2010-2012 | Ford | F-150 | Harley-Davidson Edition |
| 2005-2023 | Ford | F-150 | King Ranch |
| 2004-2023 | Ford | F-150 | Lariat |
| 2011 | Ford | F-150 | Lariat Limited |
| 2008,2013-2014,2016-2023 | Ford | F-150 | Limited |
| 2009-2023 | Ford | F-150 | Platinum |
| 2018-2023 | Ford | F-150 | Police Responder |
| 2017-2023 | Ford | F-150 | Raptor |
| 2016-2023 | Ford | F-150 | SSV |
| 2004-2014 | Ford | F-150 | STX |
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2008 | Ford | F-150 | THE 60TH ANNIVERSARY EDITION |
| 2021-2023 | Ford | F-150 | Tremor |
| 2004-2023 | Ford | F-150 | XL |
| 2004-2023 | Ford | F-150 | XLT |
| 1999 | Ford | F-250 | Base |
| 1999 | Ford | F-250 | Lariat |
| 1999 | Ford | F-250 | XL |
| 1999 | Ford | F-250 | XLT |
| 2019-2022 | Ford | Ranger | Lariat |
| 2019-2022 | Ford | Ranger | XL |
| 2019-2022 | Ford | Ranger | XLT |
| 2018 | GMC | Canyon | All Terrain |
| 2015-2018 | GMC | Canyon | Base |
| 2017-2018 | GMC | Canyon | Denali |
| 2015-2018 | GMC | Canyon | SL |
| 2015-2018 | GMC | Canyon | SLE |
| 2015-2018 | GMC | Canyon | SLT |
| 2014-2018 | GMC | Sierra 1500 | Base |
| 2007-2018 | GMC | Sierra 1500 | Denali |
| 2009-2013 | GMC | Sierra 1500 | Hybrid |
| 2007-2013 | GMC | Sierra 1500 | SL |
| 2007-2018 | GMC | Sierra 1500 | SLE |
| 2007-2018 | GMC | Sierra 1500 | SLT |
| 2007-2013 | GMC | Sierra 1500 | WT |
| 2010-2013 | GMC | Sierra 1500 | XFE |
| 2015-2018 | GMC | Sierra 2500 HD | Base |
| 2011-2018 | GMC | Sierra 2500 HD | Denali |
| 2010-2018 | GMC | Sierra 2500 HD | SLE |
| 2010-2018 | GMC | Sierra 2500 HD | SLT |
| 2010-2014 | GMC | Sierra 2500 HD | WT |
| 2015-2018 | GMC | Sierra 3500 HD | Base |
| 2011-2018 | GMC | Sierra 3500 HD | Denali |
| 2010-2018 | GMC | Sierra 3500 HD | SLE |
| 2010-2018 | GMC | Sierra 3500 HD | SLT |
| 2010-2014 | GMC | Sierra 3500 HD | WT |
| 2007-2013 | GMC | Yukon | Denali |
| 2010-2013 | GMC | Yukon | Denali Hybrid |
| 2008-2013 | GMC | Yukon | Hybrid |
| 2007-2013 | GMC | Yukon | SLE |
| 2007-2013 | GMC | Yukon | SLT |
| 2021 | Jeep | Gladiator | 80th Anniversary |
| 2020,2022 | Jeep | Gladiator | Altitude |
| 2021-2022 | Jeep | Gladiator | High Altitude |
| 2020 | Jeep | Gladiator | Launch Edition |
| 2020-2022 | Jeep | Gladiator | Mojave |
| 2020-2022 | Jeep | Gladiator | Overland |
| 2020-2022 | Jeep | Gladiator | Rubicon |
| 2020-2022 | Jeep | Gladiator | Sport |
| 2020-2022 | Jeep | Gladiator | Sport S |
| 2021-2022 | Jeep | Gladiator | Texas Trail |
| 2021-2022 | Jeep | Gladiator | Willys |
| 2021-2022 | Jeep | Gladiator | Willys Sport |
| 2018 | Jeep | Wrangler JK | Rubicon |
| 2018 | Jeep | Wrangler JK | Sahara |
| 2018 | Jeep | Wrangler JK | Sport |
| 2018 | Jeep | Wrangler JK | Sport S |
| 2018 | Jeep | Wrangler JK | Unlimited Rubicon |
| 2018 | Jeep | Wrangler JK | Unlimited Sahara |
| 2018 | Jeep | Wrangler JK | Unlimited Sport |
| 2018 | Jeep | Wrangler JK | Unlimited Sport S |
| 2017-2019 | Nissan | TITAN | Platinum Reserve |
| 2017-2019 | Nissan | TITAN | PRO-4X |
| 2017-2019 | Nissan | TITAN | S |
| 2017-2019 | Nissan | TITAN | SL |
| 2017-2019 | Nissan | TITAN | SV |
| 2016 | Nissan | TITAN XD | Platinum Reserve |
| 2016 | Nissan | TITAN XD | PRO-4X |
| 2016 | Nissan | TITAN XD | S |
| 2016 | Nissan | TITAN XD | SL |
| 2016 | Nissan | TITAN XD | SV |
| 2011-2018 | Ram | 1500 | Big Horn |
| 2012-2018 | Ram | 1500 | Express |
| 2013-2018 | Ram | 1500 | HFE |
| 2011-2018 | Ram | 1500 | Laramie |
| 2014-2015 | Ram | 1500 | Laramie Limited |
| 2011-2018 | Ram | 1500 | Laramie Longhorn |
| 2015-2018 | Ram | 1500 | Limited |
| 2014-2018 | Ram | 1500 | Lone Star |
| 2011-2016 | Ram | 1500 | Outdoorsman |
| 2013 | Ram | 1500 | R/T |
| 2015-2018 | Ram | 1500 | Rebel |
| 2011-2018 | Ram | 1500 | SLT |
| 2014-2018 | Ram | 1500 | Special Service |
| 2011-2018 | Ram | 1500 | Sport |
| 2011-2012 | Ram | 1500 | ST |
| 2011-2018 | Ram | 1500 | Tradesman |
| 2012 | Ram | 1500 | Tradesman HD |
| 2013-2018 | Ram | 2500 | Big Horn |
| 2011-2018 | Ram | 2500 | Laramie |
| 2014-2015 | Ram | 2500 | Laramie Limited |
| 2011-2018 | Ram | 2500 | Laramie Longhorn |
| 2016-2018 | Ram | 2500 | Limited |
| 2013-2015 | Ram | 2500 | Lone Star |
| 2012-2016 | Ram | 2500 | Outdoorsman |
| 2011-2018 | Ram | 2500 | Power Wagon |
| 2011-2018 | Ram | 2500 | SLT |
| 2011-2013 | Ram | 2500 | ST |
| 2013-2018 | Ram | 2500 | Tradesman |
| 2013-2018 | Ram | 3500 | Big Horn |
| 2011-2018 | Ram | 3500 | Laramie |
| 2014-2015 | Ram | 3500 | Laramie Limited |
| 2011-2018 | Ram | 3500 | Laramie Longhorn |
| 2016-2018 | Ram | 3500 | Limited |
| 2013-2015,2017 | Ram | 3500 | Lone Star |
| 2011-2018 | Ram | 3500 | SLT |
| 2011-2013 | Ram | 3500 | ST |
| 2013-2018 | Ram | 3500 | Tradesman |
| 2023 | Toyota | 4Runner | 40th Anniversary Edition |
| 2016-2023 | Toyota | 4Runner | Limited |
| 2020-2021 | Toyota | 4Runner | Nightshade |
| 2016-2023 | Toyota | 4Runner | SR5 |
| 2018-2023 | Toyota | 4Runner | SR5 Premium |
| 2016,2021-2022 | Toyota | 4Runner | Trail |
| 2017-2023 | Toyota | 4Runner | TRD Off-Road |
| 2018-2023 | Toyota | 4Runner | TRD Off-Road Premium |
| 2016-2023 | Toyota | 4Runner | TRD Pro |
| 2022-2023 | Toyota | 4Runner | TRD Sport |
| 2020-2021 | Toyota | 4Runner | Venture |
| 2016-2023 | Toyota | Tacoma | Limited |
| 2016-2023 | Toyota | Tacoma | SR |
| 2016-2023 | Toyota | Tacoma | SR5 |
| 2021 | Toyota | Tacoma | Trail |
| 2023 | Toyota | Tacoma | Trail Special Edition |
| 2016-2023 | Toyota | Tacoma | TRD Off-Road |
| 2017-2023 | Toyota | Tacoma | TRD Pro |
| 2016-2023 | Toyota | Tacoma | TRD Sport |
| 2014-2021 | Toyota | Tundra | 1794 Edition |
| 2007-2013 | Toyota | Tundra | Base |
| 2007-2021 | Toyota | Tundra | Limited |
| 2021 | Toyota | Tundra | Nightshade |
| 2010-2021 | Toyota | Tundra | Platinum |
| 2014-2021 | Toyota | Tundra | SR |
| 2007-2011,2014-2021 | Toyota | Tundra | SR5 |
| 2021 | Toyota | Tundra | Trail |
| 2015-2017,2019-2021 | Toyota | Tundra | TRD Pro |
$2,182.95
The Baja Designs 6XL Pro Linkable LED light bar kit (part 448095) gives a 2021-2026 Ford F-150 Raptor a wide, high-output auxiliary light bar that mounts in the lower bumper opening using Raptor-specific brackets. Six XL Pro pods are linked into one bar, and each pod can be aimed on its own, so you can run it straight or arced to follow the bumper.
Light output you can tune. Baja Designs lists 24,570 total lumens for the 6XL Pro Linkable version, from its next-generation LEDs. The pods use multiple lens patterns, so the bar lights zones 1, 2, 3 and 4 at the same time for a smooth blend of light.
Full adjustment. The XL Linkable system provides 45 degrees of vertical pitch adjustment, within each light or for the whole unit, and independent horizontal adjustment per light. That lets you set the beam where you want it instead of living with a fixed aim.
Ready to install. The wiring harness comes fully crimped and trimmed, and you can add links down the road. A Pre-Load kit and black rock guards for protecting the lights when they are not in use are included.
Features
- Bumper mounting brackets specific to the Ford F-150 Raptor
- 6 XL Pro pods linked into one bar, 24,570 total lumens
- 45 degrees of vertical pitch adjustment per light or for the entire unit
- Independent horizontal adjustment per light for straight or arc layouts
- Multi-pattern clear lenses, 5000K daylight color
- Pre-Load kit and black rock guards included
- Limited lifetime warranty, 30-day satisfaction guarantee, replaceable lenses and optics
Kit includes
- 1x 6XL Pro linkable light bar, clear multi-pattern
- 2x mounting brackets
- 1x wiring harness (640163)
- 2x Pre-Load brackets
- 6x black rock guards
- All necessary mounting hardware
Emissions and compliance. Baja Designs lists no CARB Executive Order for this kit. California Proposition 65 warning: Cancer and Reproductive Harm, www.P65Warnings.ca.gov. This is an off-road auxiliary light, so use it only where local laws allow.
Fitment: Baja Designs lists this kit (listed there as 44-8095) for the 2021-2026 Ford F-150 Raptor. Baja Designs sells a separate kit with its own mounts (448308) for the Raptor R and Raptor 37 trucks, and this kit is not listed for those trims. Fitment confirmed against Baja Designs' published application list. Baja Designs' installation sheet on this page is labeled for the sister Sport kit (448067), so it is not linked here.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
$1,852.95
The Baja Designs 6XL Linkable LED light bar kit (part 448067) gives a 2021-2026 Ford F-150 Raptor a wide, high-output auxiliary light bar that mounts in the lower bumper opening using Raptor-specific brackets. Six XL pods are linked into one 39-inch bar, and each pod can be aimed on its own, so you can run it straight or arced to follow the bumper.
Light output you can tune. Baja Designs lists 18,972 total lumens for the 6XL Sport version and 24,570 for the 6XL Pro version. The pods use multiple lens patterns, so the bar lights zones 1, 2, 3 and 4 (dust and fog, cornering, driving combo and spot) at the same time for a smooth blend of light.
Full adjustment. The XL Linkable system provides 45 degrees of vertical pitch adjustment, within each light or for the whole unit, and independent horizontal adjustment per light. That lets you set the beam where you want it instead of living with a fixed aim.
Built for trail abuse. The bezels and housings are hard-anodized and powder-coated cast aluminum with hardcoated polycarbonate lenses. The pods are rated IP69K (waterproof to 9 ft and pressure washable) and IK10 impact compliant, and Baja Designs states they exceed MIL-STD-810G testing.
Ready to install. The wiring harness comes fully crimped and trimmed, and you can add links down the road. A Pre-Load kit and black rock guards for protecting the lights off-road are included.
Features
- Bumper mounting brackets specific to the Ford F-150 Raptor
- 6 XL pods linked into one bar, about 39.16 in long, 4.43 in high and 2.8 in deep
- 45 degrees of vertical pitch adjustment per light or for the entire unit
- Independent horizontal adjustment per light for straight or arc layouts
- Multi-pattern clear lenses, 5000K daylight color, 156 W at 12 A, built-in overvoltage protection
- Pre-Load kit and black rock guards included
- Limited lifetime warranty, 30-day satisfaction guarantee, replaceable lenses and optics
Kit includes
- 1x 6XL Sport or Pro linkable light bar, clear multi-pattern
- 2x mounting brackets
- 1x wiring harness (640163)
- 2x Pre-Load brackets
- 6x black rock guards
- All necessary mounting hardware
Emissions and compliance. Baja Designs lists no CARB Executive Order for this kit. California Proposition 65 warning: Cancer and Reproductive Harm, www.P65Warnings.ca.gov. This is an off-road auxiliary light, so use it only where local laws allow.
Fitment: Baja Designs lists this kit for the 2021-2026 Ford F-150 Raptor. Baja Designs sells a separate kit with its own mounts (448308) for the 2024-2026 F-150 Raptor R and Raptor 37 trucks, and this kit is not listed for those trims. Fitment confirmed against Baja Designs' published application list.
Guides & Manuals
Baja Designs 448067 Installation SheetThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
$1,035.95
The Baja Designs S8 Behind Grille Kit (part 448065) puts two 10-inch clear-lens LED light bars behind the factory grille of the third-generation Ford F-150 Raptor, so you gain serious forward auxiliary lighting without a bolt-on bar changing the look of the front end.
Built for the Raptor grille. The two stainless steel brackets locate each S8 bar in the grille opening, and Baja Designs says the kit installs without drilling in normal use. Because it mounts in the grille opening, it will not work with adaptive cruise control relocation kits.
Plug into the factory switches. A splitter harness, an upfitter harness and an S8 backlight harness are included, so the bars tie into the truck's factory auxiliary upfitter switches instead of needing a separate switch panel. A buyer on Baja's page called the wiring very easy and the brackets well centered.
Bright driving/combo output. Each S8 produces 6,324 raw lumens from 8 Cree LEDs at 57.96 watts and 4.2 amps, with a 5000K daylight color and a 49,930-hour average rated life. The driving/combo beam throws light down the trail and across it, and the built-in amber backlight echoes the factory marker lamps while you drive.
Tough housings. Each bar has an aircraft-grade aluminum housing with a Mil-Spec hard anodized black finish, a billet machined aluminum bezel and a hardcoated polycarbonate lens. The bars are IP69K rated, IK10 impact compliant, exceed MIL-STD-810G, and include built-in overvoltage protection. Baja Designs also lists DirectSink thermal management, MoistureBlock sealing, ClearView optics and uService replaceable lenses and optics, and backs the kit with a 30-day satisfaction guarantee and a limited lifetime warranty.
Features
- Two 10-inch S8 LED light bars, clear lens, driving/combo beam
- 6,324 raw lumens, 57.96 W and 4.2 A per bar, 5000K
- Amber backlight feature
- Two behind-the-grille stainless steel mounting brackets and all mounting hardware
- Splitter, upfitter and S8 backlight wiring harnesses
- IP69K, IK10, MIL-STD-810G, built-in overvoltage protection
- Not compatible with adaptive cruise control relocation kits
Emissions and warnings. Baja Designs lists a California Proposition 65 warning for this product (cancer and reproductive harm, www.P65Warnings.ca.gov).
Fitment: Baja Designs lists this kit for the 2021-2026 Ford F-150 Raptor, the 2024-2026 F-150 Raptor 37 (the same third-generation Raptor with the 37 package) and the 2024-2026 F-150 Raptor R. Fitment confirmed against Baja Designs' published application list. Baja's listing starts the Raptor R at 2024, so this page does the same.
Guides & Manuals
Baja Designs 448065 Installation SheetThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2024-2026 | Ford | F-150 | Raptor 37 |
| 2024-2026 | Ford | F-150 | Raptor R |
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.