Welcome to RaptorsOnly.com
-
Brands
Shop by brand
- 3D MAXpider
- Access
- Addictive Desert Designs
- Advan
- AEM Induction
- aFe
- Air Lift
- Airaid
- Alcon
- AlphaRex
- AMP Research
- AMS
- Anderson Composites
- ANZO
- ARB
- Atturo Tire
- AutoMeter
- AVS
- AWE Tuning
- BackRack
- Baer Brakes
- Baja Designs
- BAK
- Banks Power
- BBK
- BBS
- BD Diesel
- Belltech
- Bestop
- BFGoodrich
- BMC
- Body Armor 4x4
- Borla
- Brembo
- Brembo OE
- Bully Dog
- Bushwacker
- Camburg
- Clevite
- COBB
- Cometic Gasket
- COMP Cams
- CORSA Performance
- Covercraft
- CSF
- DBA
- DeatschWerks
- DFC
- Diode Dynamics
- DS18
- DV8 Offroad
- Eaton
- EBC
- Eibach
- Enkei
- Extang
- Fabtech
- Fel-Pro
- fifteen52
- Firestone
- Flowmaster
- Ford Racing
- Forgestar
- FORM Lighting
- FOX
- Garrett
- Gates
- GEN-Y Hitch
- Go Fast Bits
- Go Rhino
- Gram Lights
- Granatelli Motor Sports
- GSC Power Division
- Hawk Performance
- Hella
- Hellwig
- Hotchkis
- Husky Liners
- ICON
- Injen
- J&L
- JBA
- JLT
- K&N Engineering
- KC HiLiTES
- King Engine Bearings
- King Shocks
- Kleinn Air Horns
- Kooks Headers
- KYB
- LIQUI MOLY
- LUND
- Magnaflow
- Mahle OE
- Maxtrac
- Mayhem
- MBRP
- McGard
- Method Wheels
- MGP
- Michelin
- Mickey Thompson
- Mishimoto
- Moog
- Motul
- MTX Wheels
- N-Fab
- Nacho Offroad Technology
- NGK
- Nitrous Express
- Odyssey Battery
- ORACLE Lighting
- PowerStop
- Putco
- QA1
- Raceline
- Radium Engineering
- Rally Armor
- Rampage
- Raxiom
- Retrax
- Rhino-Rack
- Ridetech
- Rigid Industries
- Rival 4x4
- RockJock
- Roll-N-Lock
- Roush
- Royal Purple
- SCT Performance
- Skyjacker
- Snow Performance
- SPC Performance
- SPOD
- Stainless Works
- Superlift
- Superpro
- Timbren
- Torque Solution
- TOYO
- Truxedo
- Tuff Country
- Turbosmart
- UMI Performance
- Undercover
- Volant
- Vossen
- Wagner Tuning
- WeatherTech
- Weld
- Westin
- Whiteline
- Wilwood
- Yokohama Tire
- Yukon Gear & Axle
- Zone Offroad
No brands found. Try another name or initial.
156 brands
View all brands -
F-150 Raptor
- F-150 Raptor
-
1st Gen (2010-2014)
-
2nd Gen (2017-2020)
-
3rd Gen (2021-Present)
-
Raptor R (2023-Present)
-
Bronco Raptor
- Bronco Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
-
Ranger Raptor
- Ranger Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
Your cart
You'll love this too
Discount invalid. Please make sure the discount details are correct.
Discount code is already applied.
Discount applied!
Subheading
Product comparison
Describe you product comparison grid
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
2489 products
2489 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
The aFe POWER Rapid Induction cold air intake replaces the factory airbox and inlet tubing on the 2021-2026 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6. This version uses a pre-oiled Pro 5R filter for maximum flow. aFe rates it at 765 CFM at 7 in H2O, says it outflows the factory intake by 72%, and shows dyno gains of up to +18 HP and +17 lb-ft of torque.
Heat shield that keeps the air cool. A powder-coated one-piece heat shield snaps onto the top of the lower half of the factory airbox, uses the factory mounting locations and keeps the filter in a shielded pocket away from hot engine air.
Pre-oiled Pro 5R media. The 5-3/4 in tall 360-degree radial-flow filter has a 5-1/2 in flange and five layers of progressively finer cotton gauze. aFe says it passes the largest amount of air and delivers the highest power gains in most cases, and rates it for street and track use. The inverted top adds filter surface area for longer service intervals, and the filter is washable and reusable.
Dyno-tuned tube. The computer-designed roto-molded tube is made of heat-resistant cross-linked polyethylene (XLPE) and keeps a factory-quality fit while delivering the power gains.
Direct bolt-on install. The system needs no cutting or drilling on factory parts. Stainless-steel clamps and a silicone coupling are included. aFe also offers an optional Dynamic Air Scoop (52-10010S black, 52-10010SR red, 52-10010SL blue) and Intake Cover (54-32648-B) for this system.
Features
- Up to +18 HP and +17 lb-ft on aFe's dyno
- Flows 765 CFM at 7 in H2O, 72% more than the factory intake
- Washable, reusable Pro 5R air filter for maximum performance
- Powder-coated one-piece heat shield mounts to the lower half of the factory airbox
- Computer-designed roto-molded intake tube
- No cutting or drilling on OEM parts
- Stainless-steel clamps and silicone coupling included
Emissions: aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the 2021-2026 Ford F-150 Raptor with the V6-3.5L (tt) EcoBoost. The 5.2L supercharged Raptor R is not listed. aFe also lists the 2021-2026 F-150 3.5L EcoBoost, the 2022-2026 Expedition and the 2022-2026 Lincoln Navigator with the same engine. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | V6-3.5L (tt) EcoBoost |
| 2022-2026 | Ford | Expedition | V6-3.5L (tt) EcoBoost |
| 2022-2026 | Lincoln | Navigator | V6-3.5L (tt) EcoBoost |
The aFe POWER Rapid Induction cold air intake replaces the factory airbox and inlet tubing on the 2017-2020 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6. It pairs a powder-coated heat shield with a roto-molded intake tube and an oil-free Pro DRY S filter. aFe rates it at 675 CFM at 7 in H2O and says it outflows the factory intake by 50%.
Heat shield that keeps the air cool. A powder-coated one-piece heat shield snaps onto the top of the lower half of the factory airbox and uses the stock mounting locations, so the filter sits in a shielded pocket away from hot engine air.
Oil-free Pro DRY S media. The 5-3/4 in tall inverted-top conical filter has a 5-1/2 in flange and three layers of synthetic media that filter well without oil. It is washable and reusable and moves more air than the stock filter.
Dyno-tuned roto-molded tube. The computer-designed tube is molded in a single piece to carry air to the turbos with a factory-quality fit and no seams to leak.
Direct bolt-on install. All clamps, silicone couplings and hardware are included. The kit needs no cutting or drilling on factory parts.
Features
- 675 CFM rating at 7 in H2O, outflows the factory intake by 50%
- Pro DRY S oil-free, three-layer synthetic media, washable and reusable
- Powder-coated one-piece heat shield uses stock mounting locations
- Computer-designed, roto-molded intake tube
- No cutting or drilling on OEM parts for a faster installation
- Clamps, couplings and hardware included
Emissions: aFe states this product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the 2017-2020 Ford F-150 Raptor with the V6-3.5L (tt) EcoBoost, so this intake fits the 2017, 2018, 2019 and 2020 Raptor and not the 2010-2014 SVT Raptor or the 5.2L Raptor R. aFe also lists the 2017-2020 F-150 3.5L EcoBoost, the 2018-2021 Expedition and the 2018-2021 Lincoln Navigator with the same engine. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
| 2017-2020 | Ford | F-150 | V6-3.5L (tt) EcoBoost |
| 2018-2021 | Ford | Expedition | V6-3.5L (tt) EcoBoost |
| 2018-2021 | Lincoln | Navigator | V6-3.5L (tt) EcoBoost |
The aFe POWER Rapid Induction cold air intake replaces the factory airbox and inlet tubing on the 2021-2026 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6. This version uses an oil-free Pro DRY S filter. aFe rates it at 675 CFM at 7 in H2O, says it outflows the factory intake by 52%, and shows dyno gains of up to +14 HP and +15 lb-ft of torque.
Heat shield that keeps the air cool. A powder-coated one-piece heat shield snaps onto the top of the lower half of the factory airbox, uses the factory mounting locations and keeps the filter in a shielded pocket away from hot engine air.
Oil-free Pro DRY S media. The 5-3/4 in tall 360-degree radial-flow filter has a 5-1/2 in flange and three layers of synthetic media that filter well and hold dust without oil. aFe rates it for street use. The inverted top adds filter surface area for longer service intervals, and the filter is washable and reusable.
Dyno-tuned tube. The computer-designed roto-molded tube is made of heat-resistant cross-linked polyethylene (XLPE) and keeps a factory-quality fit while delivering the power gains.
Direct bolt-on install. The system needs no cutting or drilling on factory parts. Stainless-steel clamps and a silicone coupling are included. aFe also offers an optional Dynamic Air Scoop (52-10010S black, 52-10010SR red, 52-10010SL blue) and Intake Cover (54-32648-B) for this system.
Features
- Up to +14 HP and +15 lb-ft on aFe's dyno
- Flows 675 CFM at 7 in H2O, 52% more than the factory intake
- Washable, reusable Pro DRY S air filter, no oil required
- Powder-coated one-piece heat shield mounts to the lower half of the factory airbox
- Computer-designed roto-molded intake tube
- No cutting or drilling on OEM parts
- Stainless-steel clamps and silicone coupling included
Emissions: aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the 2021-2026 Ford F-150 Raptor with the V6-3.5L (tt) EcoBoost. The 5.2L supercharged Raptor R is not listed. aFe also lists the 2021-2026 F-150 3.5L EcoBoost, the 2022-2026 Expedition and the 2022-2026 Lincoln Navigator with the same engine. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | V6-3.5L (tt) EcoBoost |
| 2022-2026 | Ford | Expedition | V6-3.5L (tt) EcoBoost |
| 2022-2026 | Lincoln | Navigator | V6-3.5L (tt) EcoBoost |
The aFe Rapid Induction Cold Air Intake System replaces the restrictive factory intake on the 2010 Ford F-150 SVT Raptor 5.4L V8 with a larger, freer-flowing setup. aFe's dyno testing shows up to 14 HP and 23 lb-ft of torque more than stock, and the system flows 35 percent more air than the factory intake.
Large five-layer performance filter. The 360-degree radial flow filter uses aFe's pre-oiled Pro 5R media, five layers of progressively finer cotton gauze, to give the engine the largest amount of high-flowing air. It is washable and reusable, and aFe describes the media as well suited to street use.
One-piece heat shield. The filter sits inside a black powder-coated 16-gauge steel heat shield that attaches to the lower half of the factory airbox. It reduces the hot air drawn from the engine compartment and gives the filter direct airflow. The open-element design makes the filter easy to inspect.
Dyno-tuned aluminum intake tube. A mandrel-bent aluminum tube with a wrinkle black powder-coat finish maximizes airflow and velocity and gives the engine bay a cleaner look.
Hassle-free installation. The system uses factory mounting locations and needs no cutting or drilling, so it is a direct bolt-on.
Features
- Up to +14 HP and +23 lb-ft of torque in aFe's dyno testing
- Flows 35 percent more than the factory intake
- Washable, reusable Pro 5R air filter
- 16-gauge powder-coated heat shield with aluminum intake tube
- Open-element design for easy filter inspection
- Bolts on with no cutting or drilling
Emissions
aFe states that some or all of the applications listed for this system are 50-state exempt under CARB EO D-550-15. See the Executive Order for details on your vehicle.
Fitment: aFe lists this intake for 2009-2010 Ford F-150 trucks with the 5.4L V8, which includes the 2010 SVT Raptor with the 5.4L engine, and for the 2007-2011 Expedition and Navigator 5.4L. The 6.2L SVT Raptor is not covered by this part. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsCARB Executive Order D-550-15
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010 | Ford | F-150 | SVT Raptor 5.4L V8 |
| 2009-2010 | Ford | F-150 | 5.4L V8 |
| 2007-2011 | Ford | Expedition | 5.4L V8 |
| 2007-2011 | Lincoln | Navigator | 5.4L V8 |
The aFe Rapid Induction Cold Air Intake System with Pro 5R filter, part 54-11902-1, replaces the restrictive factory intake on the 2010-2014 Ford F-150 SVT Raptor with the 6.2L V8. It keeps the factory air box and adds a one-piece black heat shield, a dyno-tuned wrinkle-black aluminum intake tube and a large washable Pro 5R filter, so it installs with ordinary hand tools and gives the 6.2L more air.
Large five-layer filter. The 5-1/2 inch tall oval conical Pro 5R filter is pre-oiled and uses five layers of progressively finer cotton gauze. aFe says it flows the most air of its media options and suits street use. Its inverted top adds filter surface area for more flow and longer service intervals, and it can be washed and re-oiled instead of replaced.
Top-mounted heat shield. A durable 18-gauge powder-coated heat shield snaps onto the lower half of the factory air box to separate the filter from engine heat and make installation hassle-free.
One-piece wrinkle-black tube. The dyno-tuned powder-coated aluminum tube improves airflow and volumetric efficiency, and its one-piece design keeps installation simple.
Features
- Washable, reusable Pro 5R air filter for life-long performance
- Durable one-piece 18-gauge black heat shield mounts to the lower half of the OE intake housing
- Powder-coated wrinkle-black intake tube, dyno-tuned for performance gains
- Uses the factory air box; simple bolt-on installation
Emissions
aFe states that some or all of the listed applications are 50-state exempt; see CARB EO D-550-15 for details.
Fitment
Fitment: aFe lists the 2010-2014 Ford F-150 SVT Raptor with the V8-6.2L engine. The same kit also fits the 2011-2014 F-150 with the 6.2L V8. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsCARB Executive Order D-550-15
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2011-2014 | Ford | F-150 | V8-6.2L |
The aFe Rapid Induction Cold Air Intake System with Pro 5R filters in brushed aluminum, part 52-10015RH, replaces the restrictive factory intake on the 2021-2026 Ford F-150 Raptor with the 3.5L EcoBoost twin-turbo V6. Two large oiled-cotton filters and two 3-1/2 inch mandrel-bent brushed aluminum tubes feed each turbo, and a brushed heat shield and cover give the engine bay a polished look. aFe lists gains of up to 11 hp and 14 lb-ft of torque, with flow up to 34% above the factory intake (measured at 695 CFM at 7 inches of water).
Two big filters for maximum airflow. The Pro 5R filters are 8 inches tall with 360-degree radial flow and five layers of progressively finer cotton gauze, pre-oiled for protection. They are washable and reusable, and aFe says the media suits street and track use.
Mandrel-bent tubes feed both turbos. Dual one-piece 3-1/2 inch brushed aluminum tubes carry unrestricted air from the filters to the turbos for better volumetric efficiency.
Heat shield and cover. A lightweight brushed aluminum heat shield snaps onto the top of the lower half of the factory air box, using factory mounting locations, to separate the filters from engine heat. A brushed aluminum cover finishes the look.
Straightforward install. Premium hardware and clamps are included and nothing on the factory parts has to be cut or drilled.
Features
- Dyno-proven gains up to +11 hp and +14 lb-ft of torque; outflows the factory intake by up to 34%
- Dual washable, reusable Pro 5R air filters, 8 in tall
- Large dual 3-1/2 in mandrel-bent brushed aluminum intake tubes
- One-piece brushed heat shield installs in a snap
- No cutting or drilling on OEM parts
Emissions
aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California DMV.
Fitment
Fitment: aFe lists the 2021-2026 Ford F-150 Raptor with the V6-3.5L (tt) EcoBoost engine. The 5.2L supercharged Raptor R is not listed. The same kit also fits the other 2021-2026 F-150 3.5L EcoBoost trucks, 2022-2026 Expedition and 2022-2026 Navigator listed below. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | V6-3.5L (tt) EcoBoost |
| 2022-2026 | Ford | Expedition | V6-3.5L (tt) EcoBoost |
| 2022-2026 | Lincoln | Navigator | V6-3.5L (tt) EcoBoost |
The aFe Rapid Induction Cold Air Intake System with Pro 5R filters, part 52-10015R, replaces the restrictive factory intake on the 2021-2026 Ford F-150 Raptor with the 3.5L EcoBoost twin-turbo V6. Two large oiled-cotton filters and two 3-1/2 inch mandrel-bent aluminum tubes feed each turbo, and a wrinkle-black powder-coated heat shield and cover keep the engine bay looking clean. aFe lists gains of up to 11 hp and 14 lb-ft of torque, with flow up to 34% above the factory intake (measured at 695 CFM at 7 inches of water).
Two big filters for maximum airflow. The Pro 5R filters are 8 inches tall with 360-degree radial flow and five layers of progressively finer cotton gauze, pre-oiled for protection. They are washable and reusable, so they last the life of the truck, and aFe says the media suits street and track use.
Mandrel-bent tubes feed both turbos. Dual one-piece 3-1/2 inch wrinkle-black powder-coated aluminum tubes carry unrestricted air from the filters to the turbos for better volumetric efficiency.
Heat shield and cover. A lightweight aluminum heat shield snaps onto the top of the lower half of the factory air box, using factory mounting locations, to separate the filters from engine heat. A matching aluminum cover finishes the look.
Straightforward install. Premium hardware and clamps are included and nothing on the factory parts has to be cut or drilled.
Features
- Dyno-proven gains up to +11 hp and +14 lb-ft of torque; outflows the factory intake by up to 34%
- Dual washable, reusable Pro 5R air filters, 8 in tall
- Large dual 3-1/2 in mandrel-bent wrinkle-black powder-coated aluminum intake tubes
- One-piece powder-coated heat shield installs in a snap
- No cutting or drilling on OEM parts
Emissions
aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California DMV.
Fitment
Fitment: aFe lists the 2021-2026 Ford F-150 Raptor with the V6-3.5L (tt) EcoBoost engine. The 5.2L supercharged Raptor R is not listed. The same kit also fits the other 2021-2026 F-150 3.5L EcoBoost trucks, 2022-2026 Expedition and 2022-2026 Navigator listed below. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | V6-3.5L (tt) EcoBoost |
| 2022-2026 | Ford | Expedition | V6-3.5L (tt) EcoBoost |
| 2022-2026 | Lincoln | Navigator | V6-3.5L (tt) EcoBoost |
The aFe Rapid Induction Dual 3-1/2 inch Cold Air Intake System, part 54-12882-B, is built for the 2017-2020 Ford F-150 Raptor with the 3.5L EcoBoost twin-turbo V6. A sealed airbox with two large Pro 5R filters and two black powder-coated 3-1/2 inch tubes feeds both turbos, and aFe rates the system at 800 CFM at 7 inches of water, outflowing the factory intake by up to 78%.
Two large five-layer filters. The system uses pre-oiled, 8 inch tall radial-flow Pro 5R filters with five layers of progressively finer mesh cotton media for maximum airflow. They are washable and reusable.
Dual 3-1/2 inch tubes with an H-pipe. Mandrel-bent wrinkle-black powder-coated aluminum tubes are linked by an H-pipe that balances pressure between the two tubes and maximizes airflow and velocity.
Heat shield and cover. A wrinkle-black powder-coated aluminum heat shield snaps onto the top of the lower half of the factory air box, using factory mounting locations, and a black powder-coated aluminum cover finishes the system.
Bolt-on installation. All clamps, couplings and hardware are included and nothing on the factory parts has to be cut or drilled.
Features
- 800 CFM rating at 7 in H2O; outflows the factory intake by up to 78%
- Includes dual Pro 5R pre-oiled, washable air filters
- Large dual 3-1/2 in mandrel-bent wrinkle-black powder-coated aluminum tubes with H-pipe
- Black powder-coated aluminum cover and one-piece heat shield use stock mounting locations
- No cutting or drilling on factory parts
Emissions
aFe states this product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California DMV.
Fitment
Fitment: aFe lists the 2017-2020 Ford F-150 Raptor with the V6-3.5L (tt) EcoBoost engine. The same kit also fits the 2017-2020 F-150 3.5L EcoBoost, 2018-2021 Expedition and 2018-2021 Navigator listed below. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
| 2017-2020 | Ford | F-150 | V6-3.5L (tt) EcoBoost |
| 2018-2021 | Ford | Expedition | V6-3.5L (tt) EcoBoost |
| 2018-2021 | Lincoln | Navigator | V6-3.5L (tt) EcoBoost |
The aFe Rapid Induction Dual 3-1/2 inch Cold Air Intake System, part 54-12972-B, is built for the 2017-2020 Ford F-150 Raptor with the 3.5L EcoBoost twin-turbo V6. A sealed airbox with two large Pro 5R filters and two black 3-1/2 inch tubes feeds both turbos, and aFe rates the system at 1,000 CFM at 7 inches of water, outflowing the factory intake by up to 92%.
Two large five-layer filters. The system uses pre-oiled, 7 inch tall radial-flow Pro 5R filters with five layers of progressively finer mesh cotton media for maximum airflow. They are washable and reusable.
Dual 3-1/2 inch tubes with an H-pipe. Mandrel-bent wrinkle-black powder-coated aluminum tubes are linked by an H-pipe that balances pressure between the two tubes.
Heat shield. A wrinkle-black powder-coated 18-gauge steel heat shield snaps onto the top of the lower half of the factory air box, using factory mounting locations.
Bolt-on installation. All clamps, couplings and hardware are included and nothing on the factory parts has to be cut or drilled.
Features
- 1000 CFM rating at 7 in H2O; outflows the factory intake by up to 92%
- Includes dual Pro 5R pre-oiled, washable air filters
- 3-1/2 in mandrel-bent wrinkle-black powder-coated aluminum intake tubes with H-pipe
- Black powder-coated one-piece heat shield uses stock mounting locations
- No cutting or drilling on factory parts
Emissions
aFe states this product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California DMV.
Fitment
Fitment: aFe lists the 2017-2020 Ford F-150 Raptor with the V6-3.5L (tt) EcoBoost engine. The same kit also fits the 2017-2020 F-150 3.5L EcoBoost and the 2018-2021 Expedition listed below. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
| 2017-2020 | Ford | F-150 | V6-3.5L (tt) EcoBoost |
| 2018-2021 | Ford | Expedition | V6-3.5L (tt) EcoBoost |
The aFe Rapid Induction Dual 3-1/2 inch Cold Air Intake System in brushed aluminum, part 54-12882-H, is built for the 2017-2020 Ford F-150 Raptor with the 3.5L EcoBoost twin-turbo V6. A sealed airbox with two large Pro 5R filters and two brushed aluminum 3-1/2 inch tubes feeds both turbos, and aFe rates the system at 800 CFM at 7 inches of water, outflowing the factory intake by up to 78%.
Two large five-layer filters. The system uses pre-oiled, 8 inch tall radial-flow Pro 5R filters with five layers of progressively finer mesh cotton media for maximum airflow. They are washable and reusable.
Dual 3-1/2 inch brushed tubes with an H-pipe. Mandrel-bent brushed aluminum tubes are linked by an H-pipe that balances pressure between the two tubes and maximizes airflow and velocity.
Heat shield and cover. A brushed aluminum heat shield snaps onto the top of the lower half of the factory air box, using factory mounting locations, and a brushed aluminum cover finishes the system.
Bolt-on installation. All clamps, couplings and hardware are included and nothing on the factory parts has to be cut or drilled.
Features
- 800 CFM rating at 7 in H2O; outflows the factory intake by up to 78%
- Includes dual Pro 5R pre-oiled, washable air filters
- Dual 3-1/2 in mandrel-bent brushed aluminum tubes with H-pipe
- Brushed aluminum cover and one-piece heat shield use stock mounting locations
- No cutting or drilling on factory parts
Emissions
aFe states this product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California DMV.
Fitment
Fitment: aFe lists the 2017-2020 Ford F-150 Raptor with the V6-3.5L (tt) EcoBoost engine. The same kit also fits the 2017-2020 F-150 3.5L EcoBoost, 2018-2021 Expedition and 2018-2021 Navigator listed below. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
| 2017-2020 | Ford | F-150 | V6-3.5L (tt) EcoBoost |
| 2018-2021 | Ford | Expedition | V6-3.5L (tt) EcoBoost |
| 2018-2021 | Lincoln | Navigator | V6-3.5L (tt) EcoBoost |
The aFe Dynamic Air Scoop (D.A.S.), part 52-10010S, is a molded black duct that feeds cooler outside air from the top of the front grille into the air intake of your 2021-2026 Ford F-150 Raptor with the 3.5L EcoBoost V6. Cooler air is denser air, and denser air gives the engine more to work with, which aFe designs the scoop to turn into stronger throttle response and more efficient running.
Pulls air from the coolest spot. The scoop reaches up to the grille opening so the intake breathes fresh ambient air instead of the hot air that collects in the engine bay.
Seals out hot engine air. A silicone seal on the inlet presses against the hood and blocks underhood heat from entering the intake path.
Built to take abuse. The scoop is molded from linear low-density polyethylene (LLDPE), an impact-resistant material that is also 100% recyclable.
Simple installation. It snaps into the air box and all required hardware is included, so nothing has to be cut, drilled or modified. aFe says it fits the factory intake system as well as aFe Rapid Induction and Quantum intake systems. It does not fit aFe Momentum or Magnum FORCE Stage-2 intakes.
Features
- Captures cool air from the top of the front grille for a faster, cooler intake charge
- Quickly snaps into the air box; all hardware included
- Silicone inlet seal blocks hot engine air
- Durable, impact-resistant LLDPE polymer construction
- Fits the factory intake and aFe Rapid Induction and Quantum intakes
Emissions
aFe states this product is not currently CARB exempt. It is not available for purchase in California or for use on any vehicle registered with the California DMV.
Fitment
Fitment: aFe lists the 2021-2026 Ford F-150 Raptor with the V6-3.5L (tt) EcoBoost engine. aFe also notes the scoop will not fit an F-150 with the 3.5L PowerBoost hybrid engine. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | V6-2.7L (tt) EcoBoost |
| 2021-2026 | Ford | F-150 | V6-3.5L (tt) EcoBoost |
| 2021-2026 | Ford | F-150 | V8-5.0L |
| 2021-2023 | Ford | F-150 | V6-3.3L |
| 2021 | Ford | F-150 | V6-3.0L (td) Power-Stroke |
The aFe Dynamic Air Scoop (D.A.S.), part 52-10010SR, is a molded scoop that feeds cooler outside air from the top of the front grille into the air intake of your 2021-2026 Ford F-150 Raptor with the 3.5L EcoBoost V6. This version is red, with a matching red silicone inlet seal, so it adds a splash of color under the hood. Cooler air is denser air, which aFe designs the scoop to turn into stronger throttle response and more efficient running.
Pulls air from the coolest spot. The scoop reaches up to the grille opening so the intake breathes fresh ambient air instead of the hot air that collects in the engine bay.
Seals out hot engine air. The red silicone seal on the inlet presses against the hood and blocks underhood heat from entering the intake path.
Built to take abuse. The scoop is molded from linear low-density polyethylene (LLDPE), an impact-resistant material that is also 100% recyclable.
Simple installation. It snaps into the air box and all required hardware is included, so nothing has to be cut, drilled or modified. aFe says it fits the factory intake system as well as aFe Rapid Induction and Quantum intake systems. It does not fit aFe Momentum or Magnum FORCE Stage-2 intakes.
Features
- Captures cool air from the top of the front grille for a faster, cooler intake charge
- Quickly snaps into the air box; all hardware included
- Red silicone inlet seal blocks hot engine air
- Durable, impact-resistant LLDPE polymer construction in red
- Fits the factory intake and aFe Rapid Induction and Quantum intakes
Emissions
aFe states this product is not currently CARB exempt. It is not available for purchase in California or for use on any vehicle registered with the California DMV.
Fitment
Fitment: aFe lists the 2021-2026 Ford F-150 Raptor with the V6-3.5L (tt) EcoBoost engine. aFe also notes the scoop will not fit an F-150 with the 3.5L PowerBoost hybrid engine. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | V6-2.7L (tt) EcoBoost |
| 2021-2026 | Ford | F-150 | V6-3.5L (tt) EcoBoost |
| 2021-2026 | Ford | F-150 | V8-5.0L |
| 2021-2023 | Ford | F-150 | V6-3.3L |
| 2021 | Ford | F-150 | V6-3.0L (td) Power-Stroke |
The aFe POWER Rapid Induction ST is a sealed dual-tube cold air intake for the 2017-2020 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6. It runs two 3 in tubes and two pre-oiled Pro 5R filters. aFe rates it at 900 CFM at 7 in H2O and says it outflows the factory intake by 71%.
Two large five-layer filters. Each 7 in tall radial-flow filter uses pre-oiled Pro 5R media with five layers of progressively finer cotton gauze for maximum airflow and performance. The filters are washable and reusable.
Heat shield that keeps the air cool. A wrinkle-black powder-coated aluminum one-piece heat shield snaps onto the top of the lower half of the factory airbox and uses the factory mounting locations.
Dual 3 in balanced tubes. Two mandrel-bent, wrinkle-black powder-coated aluminum intake tubes are joined by an H-pipe that balances tube pressure and maximizes airflow and velocity.
Direct bolt-on install. All clamps, couplings and hardware are included. The kit needs no cutting or drilling on factory parts.
Features
- 900 CFM rating at 7 in H2O, 71% more than the factory intake
- Two washable, reusable Pro 5R air filters
- 3 in mandrel-bent aluminum tubes with H-pipe pressure balance
- Wrinkle-black powder-coated aluminum heat shield on the factory mounting locations
- All clamps, couplings and hardware included
- No cutting or drilling on factory parts
Emissions: aFe states this product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the 2017-2020 Ford F-150 Raptor with the V6-3.5L (tt) EcoBoost, plus the 2017-2020 F-150 3.5L EcoBoost and the 2018-2021 Expedition 3.5L EcoBoost. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
| 2017-2020 | Ford | F-150 | V6-3.5L (tt) EcoBoost |
| 2018-2021 | Ford | Expedition | V6-3.5L (tt) EcoBoost |
The aFe Scorcher Blue Power Module is the Bluetooth version of aFe's plug-and-play power module for the twin-turbo 3.5L EcoBoost V6. It increases turbo boost to add horsepower and torque and sharpen throttle response, without modifying the ECU or leaving any trace on it. In aFe's dyno testing on a 3.5L F-150, race mode gained 56 HP and 62 lb-ft of torque at 4,700 RPM.
Direct plug-and-play power. Factory-style connectors attach to the engine sensors for a quick, simple install with no cutting or splicing. The LED control switch can be routed through the firewall into the cabin, or you can run the module from your phone over Bluetooth and skip running wires through the firewall.
Four power settings. Select Stock (green), Sport (yellow), Sport+ (orange) or Race (red) from the in-cabin switch or from the app, so you can match the setting to the driving you are doing.
Free Scorcher Blue app. The Bluetooth 4.0 module connects to most iOS and Android phones. The app turns your phone into a remote for the module, shows a turbo boost gauge (MAP), lets you customize each power mode, updates the module to the latest revision and can time 0-60 and quarter-mile runs. It is free on the App Store and Google Play.
Use it sensibly. aFe does not recommend running the Scorcher Blue with any other tuner or module, and recommends the Sport or Sport+ setting when towing.
Features
- Plug-and-play install with factory-style connectors
- Increases turbo boost for more power and quicker throttle response
- Bluetooth connectivity with a free iOS and Android app
- 4 power settings: Stock, Sport, Sport+ and Race
- In-cabin LED switch or smartphone control
- Does not modify the ECU and leaves no trace
Emissions
aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the Scorcher Blue for the 2021-2026 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6, along with 2021-2026 F-150 2.7L and 3.5L trucks, the 2021-2026 Bronco 2.7L and the 2022-2026 Expedition and Navigator 3.5L. aFe does not list it for the 2023-2026 F-150 Raptor R. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor 3.5L V6 EcoBoost |
| 2021-2026 | Ford | F-150 | 3.5L V6 EcoBoost |
| 2021-2026 | Ford | F-150 | 2.7L V6 EcoBoost |
| 2021-2026 | Ford | F-150 | 3.5L V6 PowerBoost Hybrid |
| 2021-2026 | Ford | Bronco | 2.7L V6 EcoBoost |
| 2022-2026 | Ford | Expedition | 3.5L V6 EcoBoost |
| 2022-2026 | Lincoln | Navigator | 3.5L V6 EcoBoost |
The aFe Scorcher GT Power Module is a plug-and-play electronic module that raises turbo boost on the twin-turbo 3.5L EcoBoost V6 to improve power, throttle response and drivability. It plugs into the truck's factory sensor connectors, does not modify the ECU and leaves no trace on it, and installs in about 30 minutes. In aFe's dyno testing on a 3.5L F-150, race mode gained 56 HP and 62 lb-ft of torque at 4,700 RPM.
Direct plug-and-play power. The module works by altering the pressure sensor signals the engine computer sees so the turbos build more boost. Factory-style connectors plug straight into the stock harness, so nothing in the wiring has to be cut or spliced.
Four power settings on the fly. A small LED switch mounts anywhere in the cabin. One button steps through Stock (green), Sport (yellow), Sport+ (orange) and Race (red), so you can drop back to a mild setting for daily driving or towing.
Built to last. The module sits in a black powder-coated aluminum extrusion case with a quality wire harness. aFe tests 100 percent of the units for proper protection, and the module works on stock trucks and alongside other aFe POWER performance products.
Use it sensibly. aFe does not recommend running the Scorcher GT with any other tuner or module, and recommends the Sport or Sport+ setting when towing.
Features
- Plug-and-play install, about 30 minutes, no modifications
- Increases turbo boost for more power and quicker throttle response
- In-cabin LED switch with 4 power positions: Stock, Sport, Sport+ and Race
- No footprint on the ECU
- High-quality case and wire harness with OEM-style connectors
Emissions
aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the Scorcher GT for the 2021-2026 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6, along with 2021-2026 F-150 2.7L and 3.5L trucks, the 2021-2026 Bronco 2.7L and the 2022-2026 Expedition and Navigator 3.5L. aFe does not list it for the 2023-2026 F-150 Raptor R. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor 3.5L V6 EcoBoost |
| 2021-2026 | Ford | F-150 | 3.5L V6 EcoBoost |
| 2021-2026 | Ford | F-150 | 2.7L V6 EcoBoost |
| 2021-2026 | Ford | F-150 | 3.5L V6 PowerBoost Hybrid |
| 2021-2026 | Ford | Bronco | 2.7L V6 EcoBoost |
| 2022-2026 | Ford | Expedition | 3.5L V6 EcoBoost |
| 2022-2026 | Lincoln | Navigator | 3.5L V6 EcoBoost |
The aFe POWER Silver Bullet throttle body spacer bolts between the throttle body and the intake on the 5.4L V8 used in the 2010 Ford F-150 SVT Raptor. It adds a short, machined turbulence stage to the intake track to sharpen throttle response and help the engine breathe.
Serrated/helix turbulence design. The serrated and helix entry creates turbulence in the intake air just before the manifold. aFe says that breaks up the fuel for a more complete burn, which supports horsepower, torque and throttle response. The serrated section also removes the whistle that helix-only spacers can make.
Billet aluminum construction. Each spacer is machined from 6061-T6 billet aluminum for light weight, strength and a clean fit and finish.
Longer intake track. Adding the spacer lengthens the intake track, which aFe says raises intake air speed and improves response.
Features
- Machined from 6061-T6 billet aluminum
- Serrated/helix entry design creates turbulence and eliminates whistle
- Increases air intake speed for better throttle response
- Fits with aFe intake systems
- 2 year limited warranty
Emissions: aFe states that some or all of the listed applications are 50-state exempt under CARB EO D-550-11 / D-550-17. Check the EO before installing on a California-registered vehicle.
Fitment: aFe lists this spacer for the 2004-2010 Ford F-150 with the V8-5.4L, with no trim list and no Raptor exclusion. The 2010 SVT Raptor is a 2010 F-150 with the 5.4L V8 (its standard engine), so it is covered. The 6.2L SVT Raptor (2010-2014) uses a different spacer, 46-33011. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010 | Ford | F-150 | SVT Raptor (V8-5.4L) |
| 2004-2010 | Ford | F-150 | V8-5.4L, all trims |
| 2004-2009 | Ford | Expedition | V8-5.4L |
| 2004-2007 | Ford | F-250 Super Duty | V8-5.4L |
| 2004-2007 | Ford | F-350 Super Duty | V8-5.4L |
| 2006-2008 | Lincoln | Mark LT | V8-5.4L |
The aFe POWER Silver Bullet throttle body spacer fits the 6.2L V8 in the 2010-2014 Ford F-150 SVT Raptor. It mounts between the throttle body and the intake manifold and uses a serrated/helix bore to add turbulence to the incoming air, aiming for better throttle response and performance.
Serrated/helix turbulence design. The serrated/helix bore creates air turbulence in the intake manifold, which aFe says raises air pressure in the combustion chamber and improves performance and throttle response. The combined design also reduces the intake whistle of helix-only spacers (US patent 7,055,513).
Billet aluminum construction. Each Silver Bullet spacer is precision machined from 6061-T6 billet aluminum for light weight, strength and a clean fit and finish.
Simple installation. The spacer uses all the factory mounting locations, and a supplied gasket provides the seal. The kit also includes the mounting hardware shown in the photos.
Features
- Machined from 6061-T6 billet aluminum
- Serrated/helix entry design creates turbulence and reduces whistle
- Uses all factory mounting locations
- Gasket and hardware included
- Fits with aFe intake systems
- 2 year limited warranty
Emissions: aFe states that some or all of the listed applications are 50-state exempt under CARB EO D-550-43. Check the EO before installing on a California-registered vehicle.
Fitment: aFe lists the 2010-2014 Ford F-150 SVT Raptor with the V8-6.2L. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor (V8-6.2L) |
| 2011-2014 | Ford | F-150 | V8-6.2L, all trims |
| 2011-2016 | Ford | F-250 Super Duty | V8-6.2L |
| 2011-2016 | Ford | F-350 Super Duty | V8-6.2L |
The aFe Sprint Booster V3 Power Converter sharpens the throttle response of a drive-by-wire Ford truck. Modern trucks translate pedal travel into an electronic signal, and that system can feel slow off the line, on hill starts and when you are passing. The Sprint Booster sits between the accelerator pedal and the truck's electronics and changes how quickly the truck responds to your foot, so the power you already have arrives sooner. It is designed for trucks with automatic transmissions.
Plug-and-play installation. The module plugs into the factory connector behind the accelerator pedal. No wires are cut and no other electronics, such as fuel injection or ABS, are affected. The compact control switch mounts inside the cabin where you can reach it.
Three modes, eighteen programs. Press the main button to cycle the modes. With the LED off the Sprint Booster is deactivated and the truck behaves as it did from the factory. Sport mode (green LED) improves response by up to 30 percent, and Race mode (red LED) by up to 60 percent. Each of Sport and Race has nine programs, from 1 (gentlest) to 9 (most aggressive), so you can tune each mode to your driving style.
Valet and Pedal Lock modes. Valet mode limits acceleration by 55, 65 or 75 percent and Pedal Lock disables acceleration altogether. Both are controlled with a three-digit PIN, which helps protect the truck from unauthorized use.
Better drivability. Besides crisper response for downshifts and passing, aFe notes a noticeable improvement in the shifts of automatic transmissions.
Features
- Plug-and-play at the connector behind the accelerator pedal, no cutting or splicing
- Ultra-compact in-cabin control switch
- 3 acceleration modes with 18 acceleration programs
- Valet and Pedal Lock modes protected by a PIN
- For automatic transmissions
Emissions
aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the Sprint Booster V3 for the 2010-2014 F-150 SVT Raptor (5.4L in 2010, 6.2L V8 2010-2014), the 2017-2026 F-150 Raptor 3.5L EcoBoost, the 2023-2026 F-150 Raptor R 5.2L supercharged V8, the 2022-2026 Bronco Raptor 3.0L EcoBoost and the 2024-2026 Ranger Raptor 3.0L EcoBoost, along with many other Ford trucks and vans. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010 | Ford | F-150 | SVT Raptor 5.4L V8 |
| 2010-2014 | Ford | F-150 | SVT Raptor 6.2L V8 |
| 2017-2026 | Ford | F-150 | Raptor 3.5L V6 EcoBoost |
| 2023-2026 | Ford | F-150 | Raptor R 5.2L V8 Supercharged |
| 2022-2026 | Ford | Bronco | Raptor 3.0L V6 EcoBoost |
| 2024-2026 | Ford | Ranger | Raptor 3.0L V6 EcoBoost |
These aFe CONTROL Sway-A-Way front coilovers are a direct bolt-in replacement for the front shocks and springs on the 2010-2014 Ford F-150 SVT Raptor. They bring the same engineering aFe's Sway-A-Way brand has refined over 20-plus years of racing into a kit built to live on a truck that is also your daily driver.
Remote reservoirs and better damping. Each 2.5 in diameter coilover has a remote reservoir with mounting brackets. The damping curves are tuned for off-road work without giving up on-road comfort or handling.
Ride-height adjustable. The kit comes pre-set for 2 in to 2.5 in of lift, and aFe includes a spanner wrench so you can set the ride height you want.
Built in the USA. The cylinder bodies are bright zinc-plated steel, and the other components are CNC-machined aluminum. aFe designs and engineers the CONTROL suspension line at its Corona, California facility.
Rebuildable. The shocks use a polished nitro steel shaft, a multi-seal carrier to prevent leaks, Teflon-lined steel spherical bearings, an internal floating piston and full synthetic shock oil, and they are fully adjustable.
Features
- 2.5 in diameter front coilovers with remote reservoirs and mounting brackets
- Pre-set for 2 in to 2.5 in of lift, with a spanner wrench for ride-height adjustment
- CNC-machined components made to tight tolerances
- Polished nitro steel shaft and multi-seal carrier for zero leakage
- Teflon-lined steel spherical bearings and internal floating piston
- Full synthetic shock oil
- Direct-fit installation, fully adjustable and rebuildable
Emissions. aFe states that this product does not require a CARB EO number.
Fitment: aFe lists this kit for the 2010-2014 Ford F-150 SVT Raptor (5.4L V8 in 2010, 6.2L V8 from 2010 through 2014). Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
These aFe CONTROL Sway-A-Way rear shocks are a direct-fit replacement for the rear shock absorbers on the 2010-2014 Ford F-150 SVT Raptor. They carry the same engineering aFe's Sway-A-Way brand has refined over 20-plus years of racing into a kit that bolts in with no vehicle modifications.
Piggyback reservoirs and better damping. Each 2.5 in diameter shock has a piggyback reservoir that makes installation easy. The damping curves are tuned for off-road work without giving up on-road comfort or handling.
Built in the USA. The cylinder bodies are bright zinc-plated steel, and the other components are CNC-machined aluminum. aFe designs and engineers the CONTROL suspension line at its Corona, California facility.
Rebuildable. The shocks use a polished nitro steel shaft, a multi-seal carrier to prevent leaks, Teflon-lined steel spherical bearings, an internal floating piston and full synthetic shock oil, and they can be rebuilt with simple tools.
Features
- 2.5 in diameter rear shocks with piggyback reservoirs
- CNC-machined components made to tight tolerances
- Polished nitro steel shaft and multi-seal carrier for zero leakage
- Teflon-lined steel spherical bearings and internal floating piston
- Full synthetic shock oil
- Direct-fit installation with no modifications, fully adjustable
- Completely rebuildable using simple tools
Emissions. aFe states that this product does not require a CARB EO number.
Fitment: aFe lists this kit for the 2010-2014 Ford F-150 SVT Raptor (5.4L V8 in 2010, 6.2L V8 from 2010 through 2014). Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
This aFe POWER Track Series cold air intake replaces the factory airbox and intake tube on the 2017-2026 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6. A carbon fiber tube with a blue Kevlar weave feeds a large pre-oiled Pro 5R filter inside an open-element housing, so the Raptor gets more airflow, a louder induction sound and a bold look under the hood.
Dyno-proven airflow. aFe measured 885 CFM at 7 in. of water, about 70% more than the factory intake, with dyno-proven gains of up to +18 HP and +17 lb-ft of torque.
Five-layer Pro 5R filter. The 9 in. tall, 360-degree radial flow filter has a 5-1/2 in. flange and five layers of progressively finer cotton gauze media. It passes the most air and gives the biggest gains in most cases, and it suits street and track use. The inverted top adds filter surface area for longer service intervals.
Carbon fiber and blue Kevlar tube. The lightweight twill weave tube combines carbon fiber and blue Kevlar with no fiberglass. It was computer designed and tested on the dyno to improve airflow, cut weight and dress up the engine bay.
One-piece housing with a cold-air scoop. The open-element XLPE (cross-linked polyethylene) housing keeps hot engine-bay air away from the filter. Its built-in scoop pulls cool air from the top of the radiator support, and the open design lets you see the filter.
Direct bolt-on install. Factory mounting locations are used, so there is no cutting or drilling. Stainless-steel clamps and flexible silicone couplers are included.
Features
- Carbon fiber tube with blue Kevlar, no fiberglass
- Pro 5R filter: pre-oiled, washable and reusable
- Open-element XLPE housing with built-in cold-air scoop
- Measured flow 885 CFM at 7 in. H2O, 70% more than stock
- Dyno-proven gains of up to +18 HP and +17 lb-ft of torque
- Stainless-steel clamps and silicone couplers included
- Uses factory mounting locations, no cutting or drilling
Emissions
aFe states this product is not currently CARB exempt. It is not available for purchase in California or for use on any vehicle registered with the California DMV.
Fitment: aFe lists this intake for the 2017-2026 Ford F-150 Raptor with the 3.5L V6 twin-turbo EcoBoost, plus other 2017-2026 F-150 trucks with that engine and the 2018-2026 Expedition and Navigator. It will not fit an F-150 with the 3.5L PowerBoost hybrid. It is not listed for the 2023-2026 Raptor R. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2017-2026 | Ford | F-150 | 3.5L V6 EcoBoost |
| 2018-2026 | Ford | Expedition | 3.5L V6 EcoBoost |
| 2018-2026 | Lincoln | Navigator | 3.5L V6 EcoBoost |
This aFe POWER Track Series cold air intake replaces the factory airbox and intake tube on the 2021-2026 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6. A 100% twill weave carbon fiber tube feeds a large, pre-oiled black Pro 5R filter inside an open-element housing, so the Raptor gets more airflow, a louder induction sound and a cleaner look under the hood.
Dyno-proven airflow. aFe measured 885 CFM at 7 in. of water, about 70% more than the factory intake, with dyno-proven gains of up to +18 HP and +17 lb-ft of torque.
Five-layer Pro 5R filter. The 9 in. tall, 360-degree radial flow filter has a 5-1/2 in. flange and five layers of progressively finer cotton gauze media. It passes the most air and gives the biggest gains in most cases, and it suits street and track use. The inverted top adds filter surface area for longer service intervals.
One-piece housing with a cold-air scoop. The open-element XLPE (cross-linked polyethylene) housing keeps hot engine-bay air away from the filter. Its built-in scoop pulls cool air from the top of the radiator support, and the open design lets you see the filter.
Carbon fiber intake tube. The tube is computer designed, clear-coated and made from 100% twill weave carbon fiber with no fiberglass, so it is light and fits the way the factory tube does.
Direct bolt-on install. Factory mounting locations are used, so there is no cutting or drilling. Stainless-steel clamps and flexible silicone couplers are included.
Features
- 100% twill weave carbon fiber intake tube, no fiberglass
- Black Pro 5R filter: pre-oiled, washable and reusable
- Open-element XLPE housing with built-in cold-air scoop
- Measured flow 885 CFM at 7 in. H2O, 70% more than stock
- Dyno-proven gains of up to +18 HP and +17 lb-ft of torque
- Stainless-steel clamps and silicone couplers included
- Uses factory mounting locations, no cutting or drilling
Emissions
aFe states this product is not currently CARB exempt. It is not available for purchase in California or for use on any vehicle registered with the California DMV.
Fitment: aFe lists this intake for the 2021-2026 Ford F-150 Raptor with the 3.5L V6 twin-turbo EcoBoost, plus other 2021-2026 F-150 trucks with that engine and the 2022-2026 Expedition and Navigator. It will not fit an F-150 with the 3.5L PowerBoost hybrid. It is not listed for the 2023-2026 Raptor R. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | 3.5L V6 EcoBoost |
| 2022-2026 | Ford | Expedition | 3.5L V6 EcoBoost |
| 2022-2026 | Lincoln | Navigator | 3.5L V6 EcoBoost |
This aFe POWER Track Series cold air intake is built for the 2023-2026 Ford F-150 Raptor R and its 5.2L supercharged V8. A 100% carbon fiber tube carries filtered air from a large black Pro 5R filter with a carbon fiber top, all inside an open-element housing that gives the Raptor R more airflow, a louder induction sound and a striking look under the hood.
Measured airflow. aFe measured 690 CFM at 7 in of water, about 37% more than the factory intake, with dyno-proven gains of up to +16 HP and +16 lb-ft of torque.
Five-layer Pro 5R filter made for the Raptor R. The 9 in tall, 360-degree radial-flow filter uses pre-oiled black Pro 5R media with five layers of progressively finer cotton gauze. It passes the most air and suits street and track use, and its carbon fiber top was designed specifically for the Raptor R.
Carbon fiber intake tube. The lightweight twill weave tube is 100% carbon fiber with no fiberglass. It was computer designed and tested on the dyno to improve airflow, cut weight and dress up the engine bay.
One-piece housing with a cold-air scoop. The open-element XLPE (cross-linked polyethylene) housing keeps hot engine-bay air away from the filter, and its built-in scoop draws cool air from the top of the radiator support. It uses the truck's factory air inlet.
Direct bolt-on install. Factory mounting locations are used, so there is no cutting or drilling. Stainless-steel clamps and a silicone bellows coupling are included.
Features
- 100% twill weave carbon fiber tube, no fiberglass
- Black Pro 5R filter with carbon fiber top: pre-oiled, washable and reusable
- Open-element housing with built-in cold-air scoop
- Measured flow 690 CFM at 7 in. H2O, 37% more than stock
- Dyno-proven gains of up to +16 HP and +16 lb-ft of torque
- Stainless-steel clamps and silicone bellows coupling included
- Uses factory mounting locations and the factory air inlet
Emissions
aFe states this product is not currently CARB exempt. It is not available for purchase in California or for use on any vehicle registered with the California DMV.
Fitment: aFe lists this intake only for the 2023-2026 Ford F-150 Raptor R with the 5.2L supercharged V8. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2026 | Ford | F-150 | Raptor R |
This aFe POWER Track Series cold air intake replaces the restrictive factory airbox and intake tube on the 2017-2020 Ford F-150 Raptor with a 3.5L EcoBoost V6. A 100% twill weave carbon fiber tube feeds a large pre-oiled Pro 5R filter inside an open-element housing, giving the Raptor more airflow, a louder induction sound and a clean look under the hood.
Dyno-proven airflow. aFe measured 865 CFM at 7 in. of water, about 92% more than the factory intake, and logged gains of +22 HP and +22 lb-ft of torque on its Dynojet.
Five-layer Pro 5R filter. The 9 in. tall, 360-degree radial flow filter has a 5-1/2 in. flange and five layers of progressively finer cotton gauze media. It passes the most air and gives the biggest power gains in most cases, and it suits street and track use. The inverted top adds filter surface area for longer service intervals.
One-piece housing with a cold-air scoop. The open-element XLPE (cross-linked polyethylene) housing keeps hot engine-bay air away from the filter. Its built-in scoop pulls cool air from the top of the radiator support, and the open design lets you see the filter.
Carbon fiber intake tube. The tube is computer designed, clear-coated and made from 100% twill weave carbon fiber with no fiberglass, so it is light and fits the way the factory tube does.
Direct bolt-on install. The system uses the factory mounting locations and needs no cutting or drilling. Stainless-steel clamps and flexible silicone couplings are included, and Track Series intakes use fewer parts than earlier kits.
Features
- 100% twill weave carbon fiber intake tube, no fiberglass
- Pro 5R filter: pre-oiled, washable and reusable
- Open-element XLPE housing with built-in cold-air scoop
- Measured flow 865 CFM at 7 in. H2O, 92% more than stock
- Dyno-proven gains of +22 HP and +22 lb-ft of torque
- Stainless-steel clamps and silicone couplings included
- Uses factory mounting locations, no cutting or drilling
Emissions
aFe states this product is not currently CARB exempt. It is not available for purchase in California or for use on any vehicle registered with the California DMV.
Fitment: aFe lists this intake for the 2017-2020 Ford F-150 Raptor with the 3.5L V6 twin-turbo EcoBoost, plus the 2017-2020 F-150 3.5L EcoBoost and the 2018-2021 Expedition and Navigator with the same engine. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
| 2017-2020 | Ford | F-150 | 3.5L V6 EcoBoost |
| 2018-2021 | Ford | Expedition | 3.5L V6 EcoBoost |
| 2018-2021 | Lincoln | Navigator | 3.5L V6 EcoBoost |
This aFe POWER Track Series cold air intake replaces the restrictive factory airbox and intake tube on the 2017-2020 Ford F-150 Raptor with a 3.5L EcoBoost V6. A 100% twill weave carbon fiber tube feeds a large, oil-free Pro DRY S filter that sits inside an open-element housing, so you get more airflow, a louder induction sound and a clean look under the hood.
Dyno-proven airflow. aFe measured 780 CFM at 7 in. of water, about 73% more than the factory intake, and logged gains of +18 HP and +17 lb-ft of torque on its Dynojet.
Large oil-free filter. The 9 in. tall, 360-degree radial flow filter has a 5-1/2 in. flange and three layers of synthetic media. It needs no filter oil, can be washed and reused, and is best suited to street driving. The inverted top adds filter surface area for longer service intervals.
One-piece housing with a cold-air scoop. The open-element XLPE (cross-linked polyethylene) housing keeps hot engine-bay air away from the filter. Its built-in scoop pulls cool air from the top of the radiator support, and the open design lets you see the filter.
Carbon fiber intake tube. The tube is computer designed, clear-coated and made from 100% twill weave carbon fiber with no fiberglass, so it is light and fits the way the factory tube does.
Direct bolt-on install. The system uses the factory mounting locations and needs no cutting or drilling. Stainless-steel clamps and flexible silicone couplings are included, and Track Series intakes use fewer parts than earlier kits.
Features
- 100% twill weave carbon fiber intake tube, no fiberglass
- Pro DRY S filter: oil-free, washable and reusable
- Open-element XLPE housing with built-in cold-air scoop
- Measured flow 780 CFM at 7 in. H2O, 73% more than stock
- Dyno-proven gains of +18 HP and +17 lb-ft of torque
- Stainless-steel clamps and silicone couplings included
- Uses factory mounting locations, no cutting or drilling
Emissions
aFe states this product is not currently CARB exempt. It is not available for purchase in California or for use on any vehicle registered with the California DMV.
Fitment: aFe lists this intake for the 2017-2020 Ford F-150 Raptor with the 3.5L V6 twin-turbo EcoBoost, plus the 2017-2020 F-150 3.5L EcoBoost and the 2018-2021 Expedition and Navigator with the same engine. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
| 2017-2020 | Ford | F-150 | 3.5L V6 EcoBoost |
| 2018-2021 | Ford | Expedition | 3.5L V6 EcoBoost |
| 2018-2021 | Lincoln | Navigator | 3.5L V6 EcoBoost |
This aFe POWER Track Series cold air intake replaces the factory airbox and intake tube on the 2021-2026 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6. A 100% twill weave carbon fiber tube feeds a large, oil-free Pro DRY S filter inside an open-element housing, so the Raptor gets more airflow, a louder induction sound and a cleaner look under the hood.
Dyno-proven airflow. aFe measured 870 CFM at 7 in. of water, about 67% more than the factory intake, with dyno-proven gains of up to +17 HP and +16 lb-ft of torque.
Large oil-free filter. The 9 in. tall, 360-degree radial flow filter has a 5-1/2 in. flange and three layers of synthetic media. It needs no filter oil, washes clean and can be reused, and it is best suited to street driving. The inverted top adds filter surface area for longer service intervals.
One-piece housing with a cold-air scoop. The open-element XLPE (cross-linked polyethylene) housing keeps hot engine-bay air away from the filter. Its built-in scoop pulls cool air from the top of the radiator support, and the open design lets you see the filter.
Carbon fiber intake tube. The tube is computer designed, clear-coated and made from 100% twill weave carbon fiber with no fiberglass, so it is light and fits the way the factory tube does.
Direct bolt-on install. Factory mounting locations are used, so there is no cutting or drilling. Stainless-steel clamps and flexible silicone couplers are included.
Features
- 100% twill weave carbon fiber intake tube, no fiberglass
- Pro DRY S filter: oil-free, washable and reusable
- Open-element XLPE housing with built-in cold-air scoop
- Measured flow 870 CFM at 7 in. H2O, 67% more than stock
- Dyno-proven gains of up to +17 HP and +16 lb-ft of torque
- Stainless-steel clamps and silicone couplers included
- Uses factory mounting locations, no cutting or drilling
Emissions
aFe states this product is not currently CARB exempt. It is not available for purchase in California or for use on any vehicle registered with the California DMV.
Fitment: aFe lists this intake for the 2021-2026 Ford F-150 Raptor with the 3.5L V6 twin-turbo EcoBoost, plus other 2021-2026 F-150 trucks with that engine and the 2022-2026 Expedition and Navigator. It will not fit an F-150 with the 3.5L PowerBoost hybrid. It is not listed for the 2023-2026 Raptor R. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | 3.5L V6 EcoBoost |
| 2022-2026 | Ford | Expedition | 3.5L V6 EcoBoost |
| 2022-2026 | Lincoln | Navigator | 3.5L V6 EcoBoost |
This aFe POWER Track Series cold air intake is built for the 2023-2026 Ford F-150 Raptor R and its 5.2L supercharged V8. A lightweight carbon fiber tube carries filtered air from a large oil-free Pro DRY S filter with a carbon fiber top, all inside an open-element housing that sits neatly in the engine bay and lets the Raptor R breathe and sound better.
Measured airflow. aFe measured 615 CFM at 7 in. of water, about 22% more than the factory intake, with dyno-proven gains of up to +14 HP and +14 lb-ft of torque.
Oil-free filter made for the Raptor R. The 9 in. tall, 360-degree radial flow filter uses three layers of synthetic Pro DRY S media, so it needs no filter oil, washes clean and can be reused. It suits street driving, and its carbon fiber top was designed specifically for the Raptor R.
Dyno-tuned carbon fiber tube. The twill weave tube is 100% carbon fiber with no fiberglass. It was computer designed and tested on the dyno to improve airflow and cut weight.
One-piece housing with a cold-air scoop. The open-element XLPE (cross-linked polyethylene) housing keeps hot engine-bay air away from the filter, and its built-in scoop draws cool air from the top of the radiator support. It uses the truck's factory air inlet.
Direct bolt-on install. Factory mounting locations are used, so there is no cutting or drilling. Stainless-steel clamps and a flexible silicone bellows coupling are included.
Features
- Dyno-tuned 100% carbon fiber intake tube
- Pro DRY S filter with carbon fiber top: oil-free, washable and reusable
- Open-element housing with built-in cold-air scoop
- Measured flow 615 CFM at 7 in. H2O, 22% more than stock
- Gains of up to +14 HP and +14 lb-ft of torque
- Stainless-steel clamps and silicone bellows coupling included
- Uses factory mounting locations and the factory air inlet
Emissions
aFe states this product is not currently CARB exempt. It is not available for purchase in California or for use on any vehicle registered with the California DMV.
Fitment: aFe lists this intake only for the 2023-2026 Ford F-150 Raptor R with the 5.2L supercharged V8. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2026 | Ford | F-150 | Raptor R |
This aFe POWER Track Series cold air intake replaces the factory airbox and intake tube on the 2017-2026 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6. A twill weave carbon fiber tube with red Kevlar feeds a large, pre-oiled black Pro 5R filter inside an open-element housing, so the Raptor gets more airflow, a louder induction sound and a cleaner look under the hood.
Dyno-proven airflow. aFe measured 885 CFM at 7 in of water, about 70% more than the factory intake, with dyno-proven gains of up to +18 HP and +17 lb-ft of torque.
Five-layer Pro 5R filter. The 9 in tall, 360-degree radial-flow filter has a 5-1/2 in flange and five layers of progressively finer cotton gauze media. It passes the most air and gives the biggest gains in most cases, and it suits street and track use. The inverted top adds filter surface area for longer service intervals.
One-piece housing with a cold-air scoop. The open-element XLPE (cross-linked polyethylene) housing keeps hot engine-bay air away from the filter. Its built-in scoop pulls cool air from the top of the radiator support, and the open design lets you see the filter.
Carbon fiber and red Kevlar tube. The tube is computer designed and dyno tested, and is made from carbon fiber and red Kevlar with no fiberglass, so it is light and looks the part.
Direct bolt-on install. Factory mounting locations are used, so there is no cutting or drilling. Stainless-steel clamps and flexible silicone couplers are included.
Features
- Carbon fiber and red Kevlar intake tube, no fiberglass
- Black Pro 5R filter: pre-oiled, washable and reusable
- Open-element XLPE housing with built-in cold-air scoop
- Measured flow 885 CFM at 7 in. H2O, 70% more than stock
- Dyno-proven gains of up to +18 HP and +17 lb-ft of torque
- Stainless-steel clamps and silicone couplers included
- Uses factory mounting locations, no cutting or drilling
Emissions
aFe states this product is not currently CARB exempt. It is not available for purchase in California or for use on any vehicle registered with the California DMV.
Fitment: aFe lists this intake for the 2017-2026 Ford F-150 Raptor with the 3.5L V6 twin-turbo EcoBoost, plus other 2017-2026 F-150 trucks with that engine and the 2018-2026 Expedition and Navigator. It will not fit an F-150 with the 3.5L PowerBoost hybrid. It is not listed for the 2023-2026 Raptor R. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2017-2026 | Ford | F-150 | V6-3.5L (tt) EcoBoost |
| 2018-2026 | Ford | Expedition | V6-3.5L (tt) EcoBoost |
| 2018-2026 | Lincoln | Navigator | V6-3.5L (tt) EcoBoost |
This aFe POWER Track Series cold air intake is built for the 2023-2026 Ford F-150 Raptor R and its 5.2L supercharged V8. A carbon fiber tube with a red Kevlar weave carries filtered air from a large black Pro 5R filter with a carbon fiber top, all inside an open-element housing that gives the Raptor R more airflow, a louder induction sound and a striking look under the hood.
Measured airflow. aFe measured 690 CFM at 7 in. of water, about 37% more than the factory intake, with dyno-proven gains of up to +16 HP and +16 lb-ft of torque.
Five-layer Pro 5R filter made for the Raptor R. The 9 in. tall, 360-degree radial flow filter uses pre-oiled black Pro 5R media with five layers of progressively finer cotton gauze. It passes the most air and suits street and track use, and its carbon fiber top was designed specifically for the Raptor R.
Carbon fiber and red Kevlar tube. The lightweight twill weave tube combines carbon fiber and red Kevlar with no fiberglass. It was computer designed and tested on the dyno to improve airflow, cut weight and dress up the engine bay.
One-piece housing with a cold-air scoop. The open-element XLPE (cross-linked polyethylene) housing keeps hot engine-bay air away from the filter, and its built-in scoop draws cool air from the top of the radiator support. It uses the truck's factory air inlet.
Direct bolt-on install. Factory mounting locations are used, so there is no cutting or drilling. Stainless-steel clamps and a flexible silicone bellows coupling are included.
Features
- Carbon fiber tube with red Kevlar, no fiberglass
- Black Pro 5R filter with carbon fiber top: pre-oiled, washable and reusable
- Open-element housing with built-in cold-air scoop
- Measured flow 690 CFM at 7 in. H2O, 37% more than stock
- Gains of up to +16 HP and +16 lb-ft of torque
- Stainless-steel clamps and silicone bellows coupling included
- Uses factory mounting locations and the factory air inlet
Emissions
aFe states this product is not currently CARB exempt. It is not available for purchase in California or for use on any vehicle registered with the California DMV.
Fitment: aFe lists this intake only for the 2023-2026 Ford F-150 Raptor R with the 5.2L supercharged V8. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2026 | Ford | F-150 | Raptor R |
These aFe POWER turbo inlet pipes replace the factory inlet tubes between the air intake and the turbochargers on the 2017-2020 Ford F-150 Raptor with the 3.5L EcoBoost V6. They remove a flow restriction in the factory plumbing, and they work with any aFe intake system or with the stock airbox.
More airflow to the turbos. aFe measured 365 CFM at 7 in. of water through the inlet pipes alone, about 16% more than the factory inlets (315 CFM). On the dyno they added +13 HP and +13 lb-ft of torque.
Computer-designed tubes. The tubes were designed on CAD software for fit and a smooth airflow path. They are made from cross-linked polyethylene (XLPE) that resists heat and impact, with stainless-steel rings pressed into the ends so the tubes do not collapse under pressure or heat.
Reinforced silicone couplings. The black silicone couplings are reinforced with three layers of polyester for heat resistance and wear protection, and they mate directly to the turbos. Stainless-steel clamps are included for a lasting seal.
Tested on the street and off-road. aFe built and tested several 3D-printed prototypes on its in-house dyno and in road testing before release. The kit arrives with all fittings pre-installed on the tubes, factory connections are kept, and aFe estimates about 2 hours for an experienced technician because the turbos are hard to reach.
Features
- Durable XLPE polymer construction, heat and impact resistant
- Black silicone reinforced couplings connect to the factory turbos
- Works with all aFe POWER air intakes and the factory air intake
- Improves airflow to the turbos: 365 CFM versus 315 CFM stock (inlets only)
- Direct fit, no modifications required
Emissions
aFe states this product is not currently CARB exempt. It is not available for purchase in California or for use on any vehicle registered with the California DMV.
Fitment: aFe lists these turbo inlet pipes for the 2017-2020 Ford F-150 Raptor with the 3.5L V6 twin-turbo EcoBoost, plus the 2017-2020 F-150 3.5L EcoBoost and the 2018-2021 Expedition and Navigator with the same engine. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
| 2017-2020 | Ford | F-150 | 3.5L V6 EcoBoost |
| 2018-2021 | Ford | Expedition | 3.5L V6 EcoBoost |
| 2018-2021 | Lincoln | Navigator | 3.5L V6 EcoBoost |
These aFe POWER turbo inlet pipes replace the factory turbo inlets on the 2021-2025 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6. They remove the flow restriction of the factory tubes and give a smoother path for air from the intake to the turbos. aFe's flow chart shows 325 CFM against 295 CFM for stock, about 10% more.
Fits aFe intakes and the factory intake. aFe says the pipes fit all of its aFe POWER air intake systems as well as the factory air intake, so they can be added to a stock truck or to an intake upgrade.
Computer-designed tubes. The inlet tubes are designed in CAD for fit and flow and made of heat- and impact-resistant cross-linked polyethylene (XLPE). A stainless-steel ring is pressed into the driver's side tube end so it cannot collapse under pressure and heat.
Silicone couplings and clamps. Compression-molded silicone couplings have integrated external ribs that hold their shape under vacuum and smooth inner surfaces that keep air moving fast. Stainless-steel Smart Seal clamps are included.
Tested on the dyno and the road. aFe built multiple 3D-printed prototypes and tested each on its dyno and on the street and off-road.
Install. The fittings come pre-installed on the tubes and all factory connections are kept. aFe estimates about 2 hours for an experienced technician because the turbos are hard to reach.
Features
- About 10% more flow than the stock turbo inlets (325 vs 295 CFM)
- Heat- and impact-resistant XLPE tubes with a stainless-steel ring on the driver's side
- Reinforced silicone couplings and stainless-steel Smart Seal clamps
- Fits all aFe POWER intakes and the factory intake
- Direct-fit install, no modifications
Emissions: aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the 2021-2025 Ford F-150 Raptor with the V6-3.5L (tt) EcoBoost, and also the 2021-2025 F-150 3.5L EcoBoost, the 2022-2026 Expedition and the 2022-2025 Lincoln Navigator with the same engine. aFe says the pipes will not fit an F-150 with the 3.5L PowerBoost hybrid. The 5.2L supercharged Raptor R is not listed. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | F-150 | Raptor |
| 2021-2025 | Ford | F-150 | V6-3.5L (tt) EcoBoost |
| 2022-2026 | Ford | Expedition | V6-3.5L (tt) EcoBoost |
| 2022-2025 | Lincoln | Navigator | V6-3.5L (tt) EcoBoost |
The aFe POWER Vulcan Series cat-back exhaust replaces the factory exhaust behind the catalytic converters on the 2024-2026 Ford Ranger Raptor with the 3.0L twin-turbo EcoBoost V6. It is built from 3 in mandrel-bent 304 stainless steel and ends in dual 4 in black stainless tips. On aFe's in-house dyno the system produced gains of up to +8 HP and +9 lb-ft of torque.
Stainless construction. The 3 in mandrel-bent 304 stainless tubing keeps the pipe diameter constant through the bends for strength, flow and corrosion resistance. The system is 100% MIG-welded for race-proven durability.
Tuned sound. An acoustically tuned expansion chamber gives a deep exhaust tone, and aFe says the system lets the engine put out all of its available power and torque.
Keeps the factory exhaust valves. The system incorporates factory-style exhaust valves that use the truck's own valve motors (the motors are not included). The valves open, close or partly restrict the exhaust path depending on throttle position.
Bolt-on fit. Factory-style flanges and hangers make this a direct bolt-on system with no cutting or modification. Computer-aided design is used for precise fitment, and the system is engineered and made at aFe's Corona, California facility.
Features
- Up to +8 HP and +9 lb-ft on aFe's dyno
- 3 in mandrel-bent 304 stainless steel tubing
- Dual 4 in diameter black 304 stainless steel clamp-on tips with laser-etched aFe POWER logo
- Acoustically tuned expansion chamber for a deep tone
- Includes factory-style exhaust valves (factory motors reused, not included)
- Factory-style flanges and hangers for a bolt-on installation
- 100% MIG-welded
Emissions: aFe states this product does not require a CARB EO number.
Fitment: aFe lists the 2024-2026 Ford Ranger Raptor with the V6-3.0L (tt) EcoBoost. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$621.99
Air Lift’s LoadLifter 5000 Ultimate for the 2009-2014 Ford F-150 Raptor offers up to 5,000 lbs. of load-leveling capacity, making towing and hauling a stress-free experience. This kit features an internal jounce bumper, helping to absorb shock, even with zero air pressure. With the air springs’ double bellow air bags, issues frequently faced when towing are no longer a concern. This kit helps to eliminate the problems frequently faced when towing and hauling, such as squat, poor headlight aim, trailer sway, body roll, and bottoming out. With the added stability that air springs provide, the user can safely haul, knowing they have optimal braking and steering control. With the ability to adjust the air pressure from 5-100 PSI, the vehicle can be ready for any weight and any situation. This kit will require professional installation. Special tools, drilling, cutting and/or grinding are required. Removal or temporary disconnection of factory components may be required. As experts in air suspension products for 70 years, Air Lift is committed to delivering quality load support parts that last. The key suspension components have all been torture-tested to ensure the highest quality, longevity, and customer satisfaction. With a lifetime warranty and a 60-day ride satisfaction guarantee, you can purchase this kit with peace of mind. Whether it is towing or hauling, the LoadLifter Ultimate kit from Air Lift will allow you to use your Raptor with added safety and comfort.
WarrantyInstallation Instructions
- Internal jounce bumper absorbs shock and can be safely run with zero PSI (maintain minimum air pressure for the ultimate ride comfort)
- Up To 5;000 Lbs. Of Leveling Capacity. Do Not Exceed Vehicles Gross Vehicle Weight Rating
- Features Air Lift's limited lifetime warranty and 60-day ride satisfaction guarantee
- Features Air Lifts Limited Lifetime Warranty And 60-Day Ride Satisfaction Guarantee
- Up to 5,000 lbs of leveling capacity-do not exceed vehicle's gross weight rating.
- Levels your vehicle when towing or hauling for a safe, comfortable ride
- Levels Your Vehicle When Towing Or Hauling For A Safe; Comfortable Ride
- Double bellow air springs, adjustable from 5-100 PSI
- Double Bellow Air Springs Adjustable From 5-100 PSI
- Schrader valves included for manual inflation
- Eliminates vehicle sag and bottoming out
- Internal jounce Bumper Absorbs Shock
- Underframe mounted kit
- Underframe-Mounted Kit
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
$204.99
Offering up to 1,000 pounds of load-leveling capacity, Air Lift’s flagship kit, the Air Lift 1000, will make towing and hauling with your 2021-2025 F-150 Raptor a comfortable and stress-free experience. Working with your existing coil springs, Air Lift air springs increase your safety and comfort when towing and hauling heavy loads. The Air Lift 1000 system fits easily into the F-150 Raptor, providing suspension support. Adding air bags helps to eliminate problems frequently faced when towing and hauling, such as squat, poor headlight aim, trailer sway, body roll, and bottoming out. With the added stability and weight distribution that air springs provide, you can haul safely, knowing that you have optimal braking and steering control. The air springs are adjustable from 5-35 PSI, ensuring that your vehicle can be ready for any weight and situation. Add air when towing or hauling and deflate when riding empty. As the leader in air suspension products for over 70 years, Air Lift is committed to delivering quality load support parts that last. To ensure the highest quality, longevity, and customer satisfaction, the key suspension components, including the air springs and all hardware, have all been torture-tested to 1 million cycles on our hydraulic test rig. With a lifetime warranty and 60-Day Ride Satisfaction Guarantee – not to mention Air Lift's reputation for excellent customer service and technical support, should you run into any snags in the installation process – you can purchase this kit with peace of mind. Installing the kit is a simple process, requiring only standard hand tools and no frame drilling. In addition, the kit comes with a fully illustrated, user-friendly installation manual. Whether it is towing or hauling, the Air Lift 1000 kit from Air Lift will give you the ability to use your Raptor with added safety and comfort.
WarrantyBuyers Guide
Installation Instructions
- Air Springs fully adjustable from 5-35 PSI on most applications, helping to level your vehicle when towing or hauling a heavy load for a safe, comfortable ride
- Air Springs Fully Adjustable From 5-35 PSI On Most Applications Helping To Level Your Vehicle When Towing
- Features Air Lift's Lifetime Warranty, with a 60 Day Ride Satisfaction Guarantee
- Features Air Lift Lifetime Warranty With A 60 Day Ride Satisfaction Guarantee
- Up to 1,000 pounds of leveling capacity. Do not exceed vehicle's GVWR.
- Rugged, durable components, including air springs and all hardware
- Up To 1;000 Pounds Of Leveling Capacity Do Not Exceed Vehicle GVWR
- Rugged Durable Components Including Air Springs And All Hardware
- Eliminates Sag And Bottoming Out
- Eliminate sag and bottoming out
- No frame drilling required
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
$685.99
Air Lift’s LoadLifter 5000 Ultimate for the 2016-2020 Ford F-150 Raptor offers up to 5,000 lbs. of load-leveling capacity, making towing and hauling a stress-free experience. This kit features an internal jounce bumper, helping to absorb shock, even with zero air pressure. With the air springs’ double bellow air bags, issues frequently faced when towing are no longer a concern. This kit helps to eliminate the problems frequently faced when towing and hauling, such as squat, poor headlight aim, trailer sway, body roll, and bottoming out. With the added stability that air springs provide, the user can safely haul, knowing they have optimal braking and steering control. With the ability to adjust the air pressure from 5-100 PSI, the vehicle can be ready for any weight and situation. This kit will require professional installation. Special tools, drilling, cutting, and/or grinding are required. Removal or temporary disconnection of factory components may be required. As experts in air suspension products for 70 years, Air Lift is committed to delivering quality load support parts that last. The key suspension components have all been torture-tested to ensure the highest quality, longevity, and customer satisfaction. With a lifetime warranty and a 60-day ride satisfaction guarantee, you can purchase this kit with peace of mind. Whether it is towing or hauling, the LoadLifter Ultimate kit from Air Lift will allow you to use your Raptor with added safety and comfort.
WarrantyInstallation Instructions
- Internal jounce bumper absorbs shock and can be safely run with zero PSI (Maintain minimum air pressure for the ultimate ride comfort)
- Up to 5,000 lbs. of leveling capacity (Do not exceed the vehicle's gross vehicle weight rating)
- Up To 5;000 Lbs. Of Leveling Capacity (Do Not Exceed The Vehicles Gross Vehicle Weight Rating)
- Features Air Lift's limited lifetime warranty and 60-day ride satisfaction guarantee
- Features Air Lifts Limited Lifetime Warranty And 60-Day Ride Satisfaction Guarantee
- Internal Jounce Bumper Absorbs Shock And Can Be Safely Run With Zero PSI
- Levels Your Vehicle When Towing Or Hauling For A Safe; Comfortable Ride
- Levels your vehicle when towing or hauling for a safe, comfortable ride
- Double bellow air springs, adjustable from 5-100 PSI
- Double Bellow Air Springs Adjustable From 5-100 PSI
- Schrader valves included for manual inflation
- Eliminates vehicle sag and bottoming out
- Underframe mounted kit
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
$553.99
Offering up to 5,000 pounds of load-leveling capacity, the LoadLifter 5000 kit from Air Lift will make towing and hauling with your Ford F-150 PowerBoost a comfortable and stress-free experience. Fully-adjustable from 5-100psi to handle any weight, our air springs are the perfect partner for your vehicle, eliminating problems frequently faced when towing and hauling, such as squat, poor headlight aim, trailer sway, body roll, and bottoming out. Each kit comes equipped with upper and lower roll plates, to protect the air springs from sharp edges. The air springs are built similar to a tire, reinforced with 2-ply fabric for maximum strength. The end caps are made with an ultra-high strength nylon composite material, as strong as steel but much lighter and corrosion proof. Installing the kit is a simple process, requiring only common hand tools and no frame drilling. The LoadLifter 5000 kit comes with clear, easy to follow instructions and an under frame design made to work with most in-bed hitches. As experts in air suspension products for over 70 years, Air Lift is committed to delivering quality load support products that fit, work and last. To ensure the highest quality, longevity, and customer satisfaction, the key suspension components, including the air springs and all hardware, have all been torture-tested to 1 million cycles on our hydraulic test rig. With a UnLimited Lifetime Warranty and 60-Day Ride Satisfaction Guarantee, not to mention the Air Lift reputation for great customer service and technical support, should you run into any snags in the installation process, you can purchase this kit with peace of mind. Whether it is towing or hauling, the LoadLifter 5000 kit from Air Lift will give you the ability to use your Ford F-150 PowerBoost with added safety and comfort.
WarrantyInstallation Instructions
Warranty
- Features Air Lift's Limited Lifetime Warranty, with a 60 Day Ride Satisfaction Guarantee
- Features Air Lifts Limited Lifetime Warranty; With A 60 Day Ride Satisfaction Guarantee
- Levels your vehicle when towing or hauling a heavy load for a safe, comfortable ride
- Levels Your Vehicle When Towing Or Hauling A Heavy Load For A Safe; Comfortable Ride
- Frame drilling required for installation with a frame-side mounted hitch
- Air Springs fully adjustable from 5-100 PSI for precise control
- Do Not exceed vehicle's gross vehicle weight rating (GVWR)
- Do Not Exceed Vehicles Gross Vehicle Weight Rating (GVWR)
- Underframe kit designed to work with most in bed hitches
- Underframe Kit Designed To Work With Most In-Bed Hitches
- Easy to install with included instructions
- Up to 5000 lbs of leveling capacity
- Fits Ford F-150 Powerboost models
- Eliminates sag and bottoming out
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | Police Responder |
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
$656.99
Offering up to 5,000 pounds of load-leveling capacity, the LoadLifter 5000 Ultimate kit from Air Lift will make towing and hauling with your Ford F-150 PowerBoost a comfortable and stress-free experience. For the ULTIMATE ride comfort and protection, the fully-adjustable air springs with internal jounce bumper are the perfect partner for your vehicle, eliminating problems frequently faced when towing and hauling including squat and bottoming out. What sets the LoadLifter 5000 Ultimate apart from other air spring kits is the built-in internal jounce bumper. An Air Lift exclusive jounce bumper inside the air spring replaces the factory jounce bumper and is completely maintenance free, running safely with zero air pressure. This added feature makes this kit the ULTIMATE in ride comfort and protection. Installing the kit is a simple process, requiring only common hand tools and no frame drilling. The LoadLifter 5000 Ultimate kit comes with clear, easy to follow instructions and an under frame design made to work with most in-bed hitches. As experts in air suspension products for over 70 years, Air Lift is committed to delivering quality load support products that fit, work and last. To ensure the highest quality, longevity, and customer satisfaction, the key suspension components, including the air springs and all hardware, have all been torture-tested to 1 million cycles on our hydraulic test rig. With a lifetime warranty and 60-Day Ride Satisfaction Guarantee, not to mention the Air Lift reputation for great customer service and technical support, should you run into any snags in the installation process, you can purchase this kit with peace of mind. Whether it is towing or hauling, the LoadLifter 5000 kit from Air Lift will give you the ability to use your Ford F-150 PowerBoost with added safety and comfort.
WarrantyInstallation Instructions
Warranty
- Levels Your Vehicle When Towing Or Hauling A Heavy Load For A Safe And Comfortable Ride
- Levels your vehicle when towing or hauling a heavy load for a safe, comfortable ride
- Features Air Lift's Limited LIfetime Warranty and 60 Day Ride Satisfaction Guarantee
- Features Air Lifts Limited Lifetime Warranty and 60 Day Ride Satisfaction Guarantee
- Adjustable Air Springs From 5-100 PSI; With Up To 5;000 Lbs. Of Leveling Capacity
- Adjustable air springs from 5-100 psi, with up to 5000 lbs of leveling capacity
- Frame Drilling Required For Installation With A Frame Side Mounted Hitch
- Frame drilling required for installation with a frame-side mounted hitch
- Internal jounce bumper absorbs shock and can be safely ran with zero psi
- Internal Jounce Bumper Absorbs Shock And Can Be Safely Ran w/Zero PSI
- Maintain minimum air pressure for the ultimate ride comfort
- Do not exceed vehicle's gross vehicle weight rating (GVWR)
- Under frame kit designed to work with most in bed hitches
- Do Not Exceed Vehicles Gross Vehicle Weight Rating (GVWR)
- Easy to install with included instructions
- Eliminates vehicle sag and bottoming out
- Fits Ford F-150 PowerBoost models
- No frame drilling required
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | Police Responder |
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
$724.99
Air Lift’s LoadLifter 5000 Ultimate with Air Spring Cradle for the Ford F-150 Raptor offers up to 5,000 lbs. of load-leveling capacity, making towing and hauling a stress-free experience. This kit features an internal jounce bumper, helping to absorb shock, even with zero air pressure. With the air springs’ double bellow air bags, issues frequently faced when towing are no longer a concern. With the included Air Spring Cradle, you’ll have complete suspension extension. This kit helps eliminate the problems frequently faced when towing and hauling, such as squat, poor headlight aim, trailer sway, body roll, and bottoming out. With the added stability that air springs provide, the user can safely haul, knowing they have optimal braking and steering control. The ability to adjust the air pressure from 5-100 PSI makes the vehicle ready for any weight and situation. The Raptor is ideal for handling any terrain, anywhere you end up, meaning maintaining suspension extension travel is a must. Including the Air Spring Cradle allows the air spring to become detached from the lower bracket, allowing your vehicle's suspension to fully extend. As experts in air suspension products for over 75 years, Air Lift is committed to delivering quality load support parts that last. The critical suspension components have all been torture-tested to ensure the highest quality, longevity, and customer satisfaction. With a lifetime warranty and a 60-day ride satisfaction guarantee, you can purchase this kit with peace of mind. Whether towing or hauling, the LoadLifter Ultimate kit from Air Lift allows you to use your Raptor with added safety and comfort.
Installation InstructionsWarranty
- Internal jounce bumper absorbs shock and can be safely run with zero PSI. Maintain minimum air pressure for the ultimate ride comfort
- Internal Jounce Bumper Absorbs Shock And Can Be Safely Run With Zero PSI Maintain Minimum Air Pressure
- Up to 5,000 lbs. of leveling capacity. Do not exceed the vehicle's gross vehicle weight rating (GVWR)
- Air spring cradles are made from lightweight resin with drain holes to help clear water and debris
- Up To 5000 Lbs Of Leveling Capacity Do Not Exceed The Vehicles Gross Vehicle Weight Rating (GVWR)
- Features Air Lift's limited lifetime warranty and 60-day ride satisfaction guarantee
- Features Air Lifts Limited Lifetime Warranty And 60-Day Ride Satisfaction Guarantee
- Levels your vehicle when towing or hauling for a safe, comfortable ride
- Levels Your Vehicle When Towing Or Hauling For A Safe Comfortable Ride
- Double bellow air springs, adjustable from 5-100 PSI
- Double Bellow Air Springs Adjustable From 5-100 PSI
- Schrader valves included for manual inflation
- Eliminates vehicle sag and bottoming out
- Underframe mounted kit
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2024 | Ford | F-150 | King Ranch |
| 2021-2024 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2024 | Ford | F-150 | Platinum |
| 2021-2024 | Ford | F-150 | Police Responder |
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2024 | Ford | F-150 | SSV |
| 2024 | Ford | F-150 | STX |
| 2021-2024 | Ford | F-150 | Tremor |
| 2021-2024 | Ford | F-150 | XL |
| 2021-2024 | Ford | F-150 | XLT |
$619.99
Offering quick and convenient air pressure adjustment, LoadController (Compact, Dual Path, Heavy Duty) will have your vehicle back on the level in no time, eliminating the need to hunt for a gas station with an air compressor! LoadController allows you to control the pressures of your air springs with the touch of a button, whether parked or on the road. There's no need to worry about changes in load or road conditions -- you can make on-the-go changes from inside the cab. With an exclusive low pressure sensor that automatically activates if pressure drops to an unsafe level, you can be sure that your vehicle and load are protected, no matter what the road throws at you. The easy-to-read, user-friendly pressure gauge features both inflate and deflate buttons, allowing users to users to quickly make changes in air pressure. LoadController is a dual path system, meaning that the air springs can be independently adjusted to different pressures, perfect for uneven loads. Dual path systems help to prevent air transfer between air springs, which provides a more stable cornering situation and significantly less body roll. The mounting pod is customizable to your preferences, with the ability to be mounted in the included mounting cup, flush mounted into the dash, or inserted into any 2 1/8 in. gauge pod. With the included, pre-assembled wiring harness, you'll be able to have your vehicle level and on the road in only a matter of hours. The heavy-duty compressor, perfect for frequent users of the system, mounts easily to the vehicle's frame and the routes the air line directly to the air springs. With the included, fully-illustrated installation manual provides clear instructions to make installation a breeze. As the leader in air suspension products for over 70 years, Air Lift is committed to delivering quality parts that last.
Installation InstructionsWarranty
Installation Instructions
- Dual-path system controls two air springs independently or controls four springs (two at a time)
- Exclusive low pressure sensor automatically adds air if pressure drops below 5 PSI
- Included mounting pod can be customized to unique user needs
- Two-year limited warranty and 60-day, money back guarantee
- Easy to install with fully-illustrated installation manual
- Two-Year Limited Warranty And 60-Day; Money-Back Guarantee
- Included Heavy Duty Compressor And Wiring Harness
- Included heavy-duty compressor and wiring harness
- One-touch control built into the compact gauge
- Compatible with any brand of air springs
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2005-2013 | Acura | MDX | Base |
| 2005-2006 | Acura | MDX | Touring |
| 1980-1981 | Buick | Century | Base |
| 1982-1996 | Buick | Century | Custom |
| 1980-1981,1984 | Buick | Century | Estate |
| 1985-1989 | Buick | Century | Estate Wagon |
| 1980-1993,1996 | Buick | Century | Limited |
| 1984 | Buick | Century | Olympia Limited |
| 1991-1996 | Buick | Century | Special |
| 1980-1981 | Buick | Century | Sport |
| 1983-1986 | Buick | Century | T-Type |
| 1991-1996 | Buick | Commercial Chassis | Base |
| 1980-1990 | Buick | Electra | Limited |
| 1980-1990 | Buick | Electra | Park Avenue |
| 1989-1990 | Buick | Electra | Park Avenue Ultra |
| 1985-1990 | Buick | Electra | T-Type |
| 2012-2013 | Buick | Enclave | Base |
| 2014-2017 | Buick | Enclave | Convenience |
| 2008-2011 | Buick | Enclave | CX |
| 2008-2011 | Buick | Enclave | CXL |
| 2014-2017 | Buick | Enclave | Leather |
| 2014-2017 | Buick | Enclave | Premium |
| 1980-1983 | Buick | Estate Wagon | Base |
| 1980-1981,1987-1991 | Buick | LeSabre | Base |
| 1985 | Buick | LeSabre | Collector's Edition |
| 1982-2005 | Buick | LeSabre | Custom |
| 1985-1990 | Buick | LeSabre | Estate Wagon |
| 1980-2005 | Buick | LeSabre | Limited |
| 1982 | Buick | LeSabre | Limited Edition F/E |
| 1980-1981 | Buick | LeSabre | Sport |
| 1987 | Buick | LeSabre | T-Type |
| 1991-2005 | Buick | Park Avenue | Base |
| 1991-2005 | Buick | Park Avenue | Ultra |
| 1980-1987 | Buick | Regal | Base |
| 1982-1983 | Buick | Regal | Estate Wagon |
| 1987 | Buick | Regal | GNX |
| 1984-1987 | Buick | Regal | Grand National |
| 1980-1987 | Buick | Regal | Limited |
| 1982 | Buick | Regal | Limited Turbo |
| 1980-1982 | Buick | Regal | Sport |
| 1983-1986 | Buick | Regal | T-Type |
| 1980-1985,1995-1999 | Buick | Riviera | Base |
| 1982 | Buick | Riviera | Limited Edition |
| 1983-1985 | Buick | Riviera | Luxury |
| 1980 | Buick | Riviera | S |
| 1981-1985 | Buick | Riviera | T-Type |
| 1983 | Buick | Riviera | XX Anniversary Edition |
| 1992-1995 | Buick | Roadmaster | Base |
| 1996 | Buick | Roadmaster | Collector's Edition |
| 1991-1995 | Buick | Roadmaster | Estate Wagon |
| 1996 | Buick | Roadmaster | Estate Wagon Collector's Edition |
| 1992-1995 | Buick | Roadmaster | Limited |
| 1996 | Buick | Roadmaster | Limited Collector's Edition |
| 1990-1991 | Buick | Skylark | Base |
| 1985,1988-1996 | Buick | Skylark | Custom |
| 1990-1996 | Buick | Skylark | Gran Sport |
| 1985,1988-1989,1993-1996 | Buick | Skylark | Limited |
| 1990-1991 | Buick | Skylark | Luxury Edition |
| 1996 | Buick | Skylark | Olympic Gold Edition |
| 1993 | Cadillac | 60 Special | Base |
| 1987-1993 | Cadillac | Allante | Base |
| 1993 | Cadillac | Allante | Indianapolis 500 Pace Car |
| 1990-1993 | Cadillac | Allante | Value Leader |
| 1987-1992 | Cadillac | Brougham | Base |
| 1987-1992 | Cadillac | Brougham | d'Elegance |
| 1985-1993 | Cadillac | Commercial Chassis | Base |
| 1992-1993 | Cadillac | Commercial Chassis | Brougham |
| 1985,1987-1993 | Cadillac | DeVille | Base |
| 1985 | Cadillac | DeVille | Cabriolet |
| 1985-1987 | Cadillac | DeVille | d'Elegance |
| 1991 | Cadillac | DeVille | Spring Edition |
| 1986-1987,1991-1993 | Cadillac | DeVille | Touring |
| 1980-1993 | Cadillac | Eldorado | Base |
| 1980-1991 | Cadillac | Eldorado | Biarritz |
| 1981 | Cadillac | Eldorado | Brougham d'Elegance |
| 1980-1985 | Cadillac | Eldorado | Cabriolet |
| 1993 | Cadillac | Eldorado | Sport |
| 1991 | Cadillac | Eldorado | Spring Edition |
| 1982-1985,1990-1993 | Cadillac | Eldorado | Touring |
| 2000,2002-2010 | Cadillac | Escalade | Base |
| 2009-2010 | Cadillac | Escalade | Hybrid |
| 2010 | Cadillac | Escalade | Hybrid Platinum |
| 2008-2010 | Cadillac | Escalade | Platinum |
| 2003-2010 | Cadillac | Escalade ESV | Base |
| 2008-2010 | Cadillac | Escalade ESV | Platinum |
| 2002-2010 | Cadillac | Escalade EXT | Base |
| 1987-1992 | Cadillac | Fleetwood | 60 Special |
| 1985-1987 | Cadillac | Fleetwood | 75 |
| 1985-1987 | Cadillac | Fleetwood | 75 Formal |
| 1980-1993 | Cadillac | Fleetwood | Base |
| 1980-1986,1993 | Cadillac | Fleetwood | Brougham |
| 1985-1989 | Cadillac | Fleetwood | Brougham Commercial Chassis |
| 1980-1986 | Cadillac | Fleetwood | Brougham d'Elegance |
| 1985,1987-1992 | Cadillac | Fleetwood | d'Elegance |
| 1980-1984 | Cadillac | Fleetwood | Formal |
| 1980-1993 | Cadillac | Seville | Base |
| 1980-1986 | Cadillac | Seville | Elegante |
| 1988-1993 | Cadillac | Seville | STS |
| 1985-2005 | Chevrolet | Astro | Base |
| 1985-1995 | Chevrolet | Astro | CL |
| 1985-1995 | Chevrolet | Astro | CS |
| 1996-2005 | Chevrolet | Astro | LS |
| 1987-2005 | Chevrolet | Astro | LT |
| 2013 | Chevrolet | Avalanche | Black Diamond LS |
| 2013 | Chevrolet | Avalanche | Black Diamond LT |
| 2013 | Chevrolet | Avalanche | Black Diamond LTZ |
| 2007-2012 | Chevrolet | Avalanche | LS |
| 2007-2012 | Chevrolet | Avalanche | LT |
| 2007-2012 | Chevrolet | Avalanche | LTZ |
| 2002-2005 | Chevrolet | Avalanche 1500 | Base |
| 2005-2006 | Chevrolet | Avalanche 1500 | LS |
| 2005-2006 | Chevrolet | Avalanche 1500 | LT |
| 2002-2003 | Chevrolet | Avalanche 1500 | North Face |
| 2002-2003 | Chevrolet | Avalanche 1500 | On Road Edition |
| 2003 | Chevrolet | Avalanche 1500 | WBH |
| 2004-2006 | Chevrolet | Avalanche 1500 | Z66 |
| 2002-2006 | Chevrolet | Avalanche 1500 | Z71 |
| 2002-2004 | Chevrolet | Avalanche 2500 | Base |
| 2005-2006 | Chevrolet | Avalanche 2500 | LS |
| 2005-2006 | Chevrolet | Avalanche 2500 | LT |
| 1988-1996 | Chevrolet | Beretta | Base |
| 1989-1993 | Chevrolet | Beretta | GT |
| 1990-1993 | Chevrolet | Beretta | GTZ |
| 1990 | Chevrolet | Beretta | Indianapolis 500 Pace Car |
| 1994-1996 | Chevrolet | Beretta | Z26 |
| 1994-1999,2005 | Chevrolet | Blazer | Base |
| 1992-1993 | Chevrolet | Blazer | Cheyenne |
| 1987 | Chevrolet | Blazer | Custom Deluxe |
| 1996-2004 | Chevrolet | Blazer | LS |
| 1995-2001 | Chevrolet | Blazer | LT |
| 1988-1991 | Chevrolet | Blazer | Scottsdale |
| 1987-1994 | Chevrolet | Blazer | Silverado |
| 1994 | Chevrolet | Blazer | Silverado Sport |
| 1999-2001 | Chevrolet | Blazer | Trailblazer |
| 2001-2004 | Chevrolet | Blazer | Xtreme |
| 2003-2005 | Chevrolet | Blazer | ZR2 |
| 1980 | Chevrolet | C10 | Big Ten |
| 1980-1981 | Chevrolet | C10 | Cheyenne |
| 1981-1986 | Chevrolet | C10 | Custom |
| 1980 | Chevrolet | C10 | Custom Deluxe |
| 1981 | Chevrolet | C10 | Deluxe |
| 1980-1986 | Chevrolet | C10 | Scottsdale |
| 1980-1986 | Chevrolet | C10 | Silverado |
| 1981-1986 | Chevrolet | C10 Suburban | Custom |
| 1980 | Chevrolet | C10 Suburban | Custom Deluxe |
| 1981 | Chevrolet | C10 Suburban | Deluxe |
| 1980,1982,1984-1986 | Chevrolet | C10 Suburban | Scottsdale |
| 1980,1982-1986 | Chevrolet | C10 Suburban | Silverado |
| 1990-1993 | Chevrolet | C1500 | 454 SS |
| 1994-1997 | Chevrolet | C1500 | Base |
| 1988-1998 | Chevrolet | C1500 | Cheyenne |
| 1988-1992 | Chevrolet | C1500 | Scottsdale |
| 1988-1998 | Chevrolet | C1500 | Silverado |
| 1990-1998 | Chevrolet | C1500 | WT |
| 1992-1999 | Chevrolet | C1500 Suburban | Base |
| 1995-1999 | Chevrolet | C1500 Suburban | LS |
| 1995-1997,1999 | Chevrolet | C1500 Suburban | LT |
| 1992-1994 | Chevrolet | C1500 Suburban | Silverado |
| 1980-1981 | Chevrolet | C20 | Cheyenne |
| 1981-1986 | Chevrolet | C20 | Custom |
| 1980 | Chevrolet | C20 | Custom Deluxe |
| 1981 | Chevrolet | C20 | Deluxe |
| 1980-1986 | Chevrolet | C20 | Scottsdale |
| 1980-1986 | Chevrolet | C20 | Silverado |
| 1981-1986 | Chevrolet | C20 Suburban | Custom |
| 1980 | Chevrolet | C20 Suburban | Custom Deluxe |
| 1981 | Chevrolet | C20 Suburban | Deluxe |
| 1980,1982,1984-1986 | Chevrolet | C20 Suburban | Scottsdale |
| 1980,1982-1986 | Chevrolet | C20 Suburban | Silverado |
| 1994-1997,1999-2000 | Chevrolet | C2500 | Base |
| 1988-1998 | Chevrolet | C2500 | Cheyenne |
| 1999-2000 | Chevrolet | C2500 | LS |
| 1988-1992 | Chevrolet | C2500 | Scottsdale |
| 1988-1998 | Chevrolet | C2500 | Silverado |
| 1994-1995,1998 | Chevrolet | C2500 | WT |
| 1992-1999 | Chevrolet | C2500 Suburban | Base |
| 1995-1999 | Chevrolet | C2500 Suburban | LS |
| 1995-1997 | Chevrolet | C2500 Suburban | LT |
| 1992-1994 | Chevrolet | C2500 Suburban | Silverado |
| 1980-1981 | Chevrolet | C30 | Cheyenne |
| 1981-1986 | Chevrolet | C30 | Custom |
| 1980 | Chevrolet | C30 | Custom Deluxe |
| 1981 | Chevrolet | C30 | Deluxe |
| 1980-1986 | Chevrolet | C30 | Scottsdale |
| 1980-1986 | Chevrolet | C30 | Silverado |
| 1994-1997,1999-2000 | Chevrolet | C3500 | Base |
| 1988-1998 | Chevrolet | C3500 | Cheyenne |
| 1999-2000 | Chevrolet | C3500 | LS |
| 1988-1992 | Chevrolet | C3500 | Scottsdale |
| 1988-1998 | Chevrolet | C3500 | Silverado |
| 2003-2009 | Chevrolet | C4500 Kodiak | C4C042 |
| 2005-2009 | Chevrolet | C4500 Kodiak | C4C044 |
| 2003-2009 | Chevrolet | C4500 Kodiak | C4E042 |
| 2005-2009 | Chevrolet | C4500 Kodiak | C4E044 |
| 2003-2009 | Chevrolet | C4500 Kodiak | C4U042 |
| 2003-2009 | Chevrolet | C4500 Kodiak | C4V042 |
| 2003-2009 | Chevrolet | C5500 Kodiak | C5C042 |
| 2005-2009 | Chevrolet | C5500 Kodiak | C5C044 |
| 2003-2009 | Chevrolet | C5500 Kodiak | C5E042 |
| 2005-2009 | Chevrolet | C5500 Kodiak | C5E044 |
$336.99
Offering economically-priced, easy control of air spring load support solutions, LoadController (Panel, Single Path, Standard Duty) from Air Lift will have your vehicle back on the level in no time. For drivers of light- to medium-duty vehicles, LoadController provides the maximum convenience, for leveling on-the-go. LoadController offers convenient and easy adjustability of your air spring pressures, based on changes in load weight and road conditions. With an exclusive low pressure sensor that automatically activates if pressure drops to an unsafe level, you can be sure that your vehicle and load are protected, no matter what the road throws at you. With an in-cab gauge control panel, you can inflate your air springs at just the touch of a button. The easy-to-read pressure gauge allows for on-the-go adjustments, with one gauge and a simple inflate and deflate button. LoadController (Panel, Single Path, Standard Duty) is a single-path system, meaning that both air springs will in inflated or deflated at the same time, to the same pressure -- offering easy and convenient load support, without the need to find a gas station or an air compressor! With the included, pre-assembled wiring harness, you'll be able to have your vehicle level and on the road in only a matter of hours. The included, fully-illustrated installation manual provides clear instructions to make installation a breeze. As the leader in air suspension products for over 70 years, Air Lift is committed to delivering quality parts that last. To ensure the highest quality, longevity, and customer satisfaction, the system comes with a two-year warranty and a 60-day, no-questions-asked, money-back guarantee -- not to mention the Air Lift reputation for great customer service and technical support, should you run into any snags in the installation process.
Installation InstructionsInstallation Instructions
Warranty
- Exclusive low pressure sensor automatically adds air if pressure drops below 5 PSI
- Single Path system inflates or deflates air springs to the same pressures
- Two-year limited warranty and 60-day, money-back guarantee
- Two Year Limited Warranty And 60 Day Money Back Guarantee
- included standard duty compressor and wiring harness
- Easy to read and use pressure gauge located in cab
- Economically priced
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2005-2013 | Acura | MDX | Base |
| 2005-2006 | Acura | MDX | Touring |
| 1980-1981 | Buick | Century | Base |
| 1982-1996 | Buick | Century | Custom |
| 1980-1981,1984 | Buick | Century | Estate |
| 1985-1989 | Buick | Century | Estate Wagon |
| 1980-1993,1996 | Buick | Century | Limited |
| 1984 | Buick | Century | Olympia Limited |
| 1991-1996 | Buick | Century | Special |
| 1980-1981 | Buick | Century | Sport |
| 1983-1986 | Buick | Century | T-Type |
| 1991-1996 | Buick | Commercial Chassis | Base |
| 1980-1990 | Buick | Electra | Limited |
| 1980-1990 | Buick | Electra | Park Avenue |
| 1989-1990 | Buick | Electra | Park Avenue Ultra |
| 1985-1990 | Buick | Electra | T-Type |
| 2012-2013 | Buick | Enclave | Base |
| 2014-2017 | Buick | Enclave | Convenience |
| 2008-2011 | Buick | Enclave | CX |
| 2008-2011 | Buick | Enclave | CXL |
| 2014-2017 | Buick | Enclave | Leather |
| 2014-2017 | Buick | Enclave | Premium |
| 1980-1983 | Buick | Estate Wagon | Base |
| 1980-1981,1987-1991 | Buick | LeSabre | Base |
| 1985 | Buick | LeSabre | Collector's Edition |
| 1982-2005 | Buick | LeSabre | Custom |
| 1985-1990 | Buick | LeSabre | Estate Wagon |
| 1980-2005 | Buick | LeSabre | Limited |
| 1982 | Buick | LeSabre | Limited Edition F/E |
| 1980-1981 | Buick | LeSabre | Sport |
| 1987 | Buick | LeSabre | T-Type |
| 1991-2005 | Buick | Park Avenue | Base |
| 1991-2005 | Buick | Park Avenue | Ultra |
| 1980-1987 | Buick | Regal | Base |
| 1982-1983 | Buick | Regal | Estate Wagon |
| 1987 | Buick | Regal | GNX |
| 1984-1987 | Buick | Regal | Grand National |
| 1980-1987 | Buick | Regal | Limited |
| 1982 | Buick | Regal | Limited Turbo |
| 1980-1982 | Buick | Regal | Sport |
| 1983-1986 | Buick | Regal | T-Type |
| 1980-1985,1995-1999 | Buick | Riviera | Base |
| 1982 | Buick | Riviera | Limited Edition |
| 1983-1985 | Buick | Riviera | Luxury |
| 1980 | Buick | Riviera | S |
| 1981-1985 | Buick | Riviera | T-Type |
| 1983 | Buick | Riviera | XX Anniversary Edition |
| 1992-1995 | Buick | Roadmaster | Base |
| 1996 | Buick | Roadmaster | Collector's Edition |
| 1991-1995 | Buick | Roadmaster | Estate Wagon |
| 1996 | Buick | Roadmaster | Estate Wagon Collector's Edition |
| 1992-1995 | Buick | Roadmaster | Limited |
| 1996 | Buick | Roadmaster | Limited Collector's Edition |
| 1990-1991 | Buick | Skylark | Base |
| 1985,1988-1996 | Buick | Skylark | Custom |
| 1990-1996 | Buick | Skylark | Gran Sport |
| 1985,1988-1989,1993-1996 | Buick | Skylark | Limited |
| 1990-1991 | Buick | Skylark | Luxury Edition |
| 1996 | Buick | Skylark | Olympic Gold Edition |
| 1993 | Cadillac | 60 Special | Base |
| 1987-1993 | Cadillac | Allante | Base |
| 1993 | Cadillac | Allante | Indianapolis 500 Pace Car |
| 1990-1993 | Cadillac | Allante | Value Leader |
| 1987-1992 | Cadillac | Brougham | Base |
| 1987-1992 | Cadillac | Brougham | d'Elegance |
| 1985-1993 | Cadillac | Commercial Chassis | Base |
| 1992-1993 | Cadillac | Commercial Chassis | Brougham |
| 1985,1987-1993 | Cadillac | DeVille | Base |
| 1985 | Cadillac | DeVille | Cabriolet |
| 1985-1987 | Cadillac | DeVille | d'Elegance |
| 1991 | Cadillac | DeVille | Spring Edition |
| 1986-1987,1991-1993 | Cadillac | DeVille | Touring |
| 1980-1993 | Cadillac | Eldorado | Base |
| 1980-1991 | Cadillac | Eldorado | Biarritz |
| 1981 | Cadillac | Eldorado | Brougham d'Elegance |
| 1980-1985 | Cadillac | Eldorado | Cabriolet |
| 1993 | Cadillac | Eldorado | Sport |
| 1991 | Cadillac | Eldorado | Spring Edition |
| 1982-1985,1990-1993 | Cadillac | Eldorado | Touring |
| 2000,2002-2010 | Cadillac | Escalade | Base |
| 2009-2010 | Cadillac | Escalade | Hybrid |
| 2010 | Cadillac | Escalade | Hybrid Platinum |
| 2008-2010 | Cadillac | Escalade | Platinum |
| 2003-2010 | Cadillac | Escalade ESV | Base |
| 2008-2010 | Cadillac | Escalade ESV | Platinum |
| 2002-2010 | Cadillac | Escalade EXT | Base |
| 1987-1992 | Cadillac | Fleetwood | 60 Special |
| 1985-1987 | Cadillac | Fleetwood | 75 |
| 1985-1987 | Cadillac | Fleetwood | 75 Formal |
| 1980-1993 | Cadillac | Fleetwood | Base |
| 1980-1986,1993 | Cadillac | Fleetwood | Brougham |
| 1985-1989 | Cadillac | Fleetwood | Brougham Commercial Chassis |
| 1980-1986 | Cadillac | Fleetwood | Brougham d'Elegance |
| 1985,1987-1992 | Cadillac | Fleetwood | d'Elegance |
| 1980-1984 | Cadillac | Fleetwood | Formal |
| 1980-1993 | Cadillac | Seville | Base |
| 1980-1986 | Cadillac | Seville | Elegante |
| 1988-1993 | Cadillac | Seville | STS |
| 1985-2005 | Chevrolet | Astro | Base |
| 1985-1995 | Chevrolet | Astro | CL |
| 1985-1995 | Chevrolet | Astro | CS |
| 1996-2005 | Chevrolet | Astro | LS |
| 1987-2005 | Chevrolet | Astro | LT |
| 2013 | Chevrolet | Avalanche | Black Diamond LS |
| 2013 | Chevrolet | Avalanche | Black Diamond LT |
| 2013 | Chevrolet | Avalanche | Black Diamond LTZ |
| 2007-2012 | Chevrolet | Avalanche | LS |
| 2007-2012 | Chevrolet | Avalanche | LT |
| 2007-2012 | Chevrolet | Avalanche | LTZ |
| 2002-2005 | Chevrolet | Avalanche 1500 | Base |
| 2005-2006 | Chevrolet | Avalanche 1500 | LS |
| 2005-2006 | Chevrolet | Avalanche 1500 | LT |
| 2002-2003 | Chevrolet | Avalanche 1500 | North Face |
| 2002-2003 | Chevrolet | Avalanche 1500 | On Road Edition |
| 2003 | Chevrolet | Avalanche 1500 | WBH |
| 2004-2006 | Chevrolet | Avalanche 1500 | Z66 |
| 2002-2006 | Chevrolet | Avalanche 1500 | Z71 |
| 2002-2004 | Chevrolet | Avalanche 2500 | Base |
| 2005-2006 | Chevrolet | Avalanche 2500 | LS |
| 2005-2006 | Chevrolet | Avalanche 2500 | LT |
| 1988-1996 | Chevrolet | Beretta | Base |
| 1989-1993 | Chevrolet | Beretta | GT |
| 1990-1993 | Chevrolet | Beretta | GTZ |
| 1990 | Chevrolet | Beretta | Indianapolis 500 Pace Car |
| 1994-1996 | Chevrolet | Beretta | Z26 |
| 1994-1999,2005 | Chevrolet | Blazer | Base |
| 1992-1993 | Chevrolet | Blazer | Cheyenne |
| 1987 | Chevrolet | Blazer | Custom Deluxe |
| 1996-2004 | Chevrolet | Blazer | LS |
| 1995-2001 | Chevrolet | Blazer | LT |
| 1988-1991 | Chevrolet | Blazer | Scottsdale |
| 1987-1994 | Chevrolet | Blazer | Silverado |
| 1994 | Chevrolet | Blazer | Silverado Sport |
| 1999-2001 | Chevrolet | Blazer | Trailblazer |
| 2001-2004 | Chevrolet | Blazer | Xtreme |
| 2003-2005 | Chevrolet | Blazer | ZR2 |
| 1980 | Chevrolet | C10 | Big Ten |
| 1980-1981 | Chevrolet | C10 | Cheyenne |
| 1981-1986 | Chevrolet | C10 | Custom |
| 1980 | Chevrolet | C10 | Custom Deluxe |
| 1981 | Chevrolet | C10 | Deluxe |
| 1980-1986 | Chevrolet | C10 | Scottsdale |
| 1980-1986 | Chevrolet | C10 | Silverado |
| 1981-1986 | Chevrolet | C10 Suburban | Custom |
| 1980 | Chevrolet | C10 Suburban | Custom Deluxe |
| 1981 | Chevrolet | C10 Suburban | Deluxe |
| 1980,1982,1984-1986 | Chevrolet | C10 Suburban | Scottsdale |
| 1980,1982-1986 | Chevrolet | C10 Suburban | Silverado |
| 1990-1993 | Chevrolet | C1500 | 454 SS |
| 1994-1997 | Chevrolet | C1500 | Base |
| 1988-1998 | Chevrolet | C1500 | Cheyenne |
| 1988-1992 | Chevrolet | C1500 | Scottsdale |
| 1988-1998 | Chevrolet | C1500 | Silverado |
| 1990-1998 | Chevrolet | C1500 | WT |
| 1992-1999 | Chevrolet | C1500 Suburban | Base |
| 1995-1999 | Chevrolet | C1500 Suburban | LS |
| 1995-1997,1999 | Chevrolet | C1500 Suburban | LT |
| 1992-1994 | Chevrolet | C1500 Suburban | Silverado |
| 1980-1981 | Chevrolet | C20 | Cheyenne |
| 1981-1986 | Chevrolet | C20 | Custom |
| 1980 | Chevrolet | C20 | Custom Deluxe |
| 1981 | Chevrolet | C20 | Deluxe |
| 1980-1986 | Chevrolet | C20 | Scottsdale |
| 1980-1986 | Chevrolet | C20 | Silverado |
| 1981-1986 | Chevrolet | C20 Suburban | Custom |
| 1980 | Chevrolet | C20 Suburban | Custom Deluxe |
| 1981 | Chevrolet | C20 Suburban | Deluxe |
| 1980,1982,1984-1986 | Chevrolet | C20 Suburban | Scottsdale |
| 1980,1982-1986 | Chevrolet | C20 Suburban | Silverado |
| 1994-1997,1999-2000 | Chevrolet | C2500 | Base |
| 1988-1998 | Chevrolet | C2500 | Cheyenne |
| 1999-2000 | Chevrolet | C2500 | LS |
| 1988-1992 | Chevrolet | C2500 | Scottsdale |
| 1988-1998 | Chevrolet | C2500 | Silverado |
| 1994-1995,1998 | Chevrolet | C2500 | WT |
| 1992-1999 | Chevrolet | C2500 Suburban | Base |
| 1995-1999 | Chevrolet | C2500 Suburban | LS |
| 1995-1997 | Chevrolet | C2500 Suburban | LT |
| 1992-1994 | Chevrolet | C2500 Suburban | Silverado |
| 1980-1981 | Chevrolet | C30 | Cheyenne |
| 1981-1986 | Chevrolet | C30 | Custom |
| 1980 | Chevrolet | C30 | Custom Deluxe |
| 1981 | Chevrolet | C30 | Deluxe |
| 1980-1986 | Chevrolet | C30 | Scottsdale |
| 1980-1986 | Chevrolet | C30 | Silverado |
| 1994-1997,1999-2000 | Chevrolet | C3500 | Base |
| 1988-1998 | Chevrolet | C3500 | Cheyenne |
| 1999-2000 | Chevrolet | C3500 | LS |
| 1988-1992 | Chevrolet | C3500 | Scottsdale |
| 1988-1998 | Chevrolet | C3500 | Silverado |
| 2003-2009 | Chevrolet | C4500 Kodiak | C4C042 |
| 2005-2009 | Chevrolet | C4500 Kodiak | C4C044 |
| 2003-2009 | Chevrolet | C4500 Kodiak | C4E042 |
| 2005-2009 | Chevrolet | C4500 Kodiak | C4E044 |
| 2003-2009 | Chevrolet | C4500 Kodiak | C4U042 |
| 2003-2009 | Chevrolet | C4500 Kodiak | C4V042 |
| 2003-2009 | Chevrolet | C5500 Kodiak | C5C042 |
| 2005-2009 | Chevrolet | C5500 Kodiak | C5C044 |
| 2003-2009 | Chevrolet | C5500 Kodiak | C5E042 |
| 2005-2009 | Chevrolet | C5500 Kodiak | C5E044 |
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.