Welcome to RaptorsOnly.com
-
Brands
Shop by brand
- 3D MAXpider
- Access
- Addictive Desert Designs
- Advan
- AEM Induction
- aFe
- Air Lift
- Airaid
- Alcon
- AlphaRex
- AMP Research
- AMS
- Anderson Composites
- ANZO
- ARB
- Atturo Tire
- AutoMeter
- AVS
- AWE Tuning
- BackRack
- Baer Brakes
- Baja Designs
- BAK
- Banks Power
- BBK
- BBS
- BD Diesel
- Belltech
- Bestop
- BFGoodrich
- BMC
- Body Armor 4x4
- Borla
- Brembo
- Brembo OE
- Bully Dog
- Bushwacker
- Camburg
- Clevite
- COBB
- Cometic Gasket
- COMP Cams
- CORSA Performance
- Covercraft
- CSF
- DBA
- DeatschWerks
- DFC
- Diode Dynamics
- DS18
- DV8 Offroad
- Eaton
- EBC
- Eibach
- Enkei
- Extang
- Fabtech
- Fel-Pro
- fifteen52
- Firestone
- Flowmaster
- Ford Racing
- Forgestar
- FORM Lighting
- FOX
- Garrett
- Gates
- GEN-Y Hitch
- Go Fast Bits
- Go Rhino
- Gram Lights
- Granatelli Motor Sports
- GSC Power Division
- Hawk Performance
- Hella
- Hellwig
- Hotchkis
- Husky Liners
- ICON
- Injen
- J&L
- JBA
- JLT
- K&N Engineering
- KC HiLiTES
- King Engine Bearings
- King Shocks
- Kleinn Air Horns
- Kooks Headers
- KYB
- LIQUI MOLY
- LUND
- Magnaflow
- Mahle OE
- Maxtrac
- Mayhem
- MBRP
- McGard
- Method Wheels
- MGP
- Michelin
- Mickey Thompson
- Mishimoto
- Moog
- Motul
- MTX Wheels
- N-Fab
- Nacho Offroad Technology
- NGK
- Nitrous Express
- Odyssey Battery
- ORACLE Lighting
- PowerStop
- Putco
- QA1
- Raceline
- Radium Engineering
- Rally Armor
- Rampage
- Raxiom
- Retrax
- Rhino-Rack
- Ridetech
- Rigid Industries
- Rival 4x4
- RockJock
- Roll-N-Lock
- Roush
- Royal Purple
- SCT Performance
- Skyjacker
- Snow Performance
- SPC Performance
- SPOD
- Stainless Works
- Superlift
- Superpro
- Timbren
- Torque Solution
- TOYO
- Truxedo
- Tuff Country
- Turbosmart
- UMI Performance
- Undercover
- Volant
- Vossen
- Wagner Tuning
- WeatherTech
- Weld
- Westin
- Whiteline
- Wilwood
- Yokohama Tire
- Yukon Gear & Axle
- Zone Offroad
No brands found. Try another name or initial.
156 brands
View all brands -
F-150 Raptor
- F-150 Raptor
-
1st Gen (2010-2014)
-
2nd Gen (2017-2020)
-
3rd Gen (2021-Present)
-
Raptor R (2023-Present)
-
Bronco Raptor
- Bronco Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
-
Ranger Raptor
- Ranger Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
Your cart
Subheading
Product comparison
Describe you product comparison grid
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
2522 products
2522 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
The aFe POWER D.A.S. PLUS combines a Dynamic Air Scoop (D.A.S.) with a drop-in Pro DRY S filter for the factory airbox on the 2021-2026 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6. It keeps the factory intake system and replaces the factory air filter, and aFe says it beats the factory setup for cool-air flow by up to 17% (results vary).
Cooler intake air. A large inlet guides ambient air from the front grille straight into the airbox, and a silicone inlet seal blocks off hot engine air.
Tough polymer scoop. The scoop is molded from linear low-density polyethylene (LLDPE), which is impact resistant, durable and 100% recyclable.
Oil-free Pro DRY S filter. Three layers of progressive synthetic media need no oil, and aFe says the media suits street use. Rounded, evenly spaced deep pleats add usable surface area for flow and dust holding. The filter is reusable and can be recharged with aFe POWER Cleaner.
Snap-in install. The scoop snaps into the airbox, all hardware is included, and the vehicle needs no modification.
Features
- Scoop and drop-in filter replace the factory filter in the factory airbox
- Impact-resistant, recyclable LLDPE polymer construction
- Silicone inlet seal blocks unwanted hot engine air
- Reusable Pro DRY S media with three layers of synthetic (dry) media
- Deep, open pleats for more surface area, flow and dust holding
- Snaps into the airbox with all hardware included
Emissions: aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the 2021-2026 Ford F-150 Raptor with the V6-3.5L (tt) EcoBoost, along with 2021-2026 F-150 models with the 2.7L, 3.5L and 5.0L engines (plus the 3.3L to 2023 and 3.0L diesel in 2021). aFe says this scoop will not fit an F-150 with the 3.5L PowerBoost hybrid. The 5.2L supercharged Raptor R is not listed. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | V6-3.5L (tt) EcoBoost |
| 2021-2026 | Ford | F-150 | V6-2.7L (tt) EcoBoost |
| 2021-2026 | Ford | F-150 | V8-5.0L |
| 2021-2023 | Ford | F-150 | V6-3.3L |
| 2021 | Ford | F-150 | V6-3.0L (td) Power-Stroke Diesel |
This aFe POWER harness extends the intake air temperature (IAT) sensor wiring on the Ford F-150 EcoBoost so you can fit any air intake that relocates the sensor. It adds 12 in (305 mm) of length with factory-style connectors, so it plugs in with no modifications. On the 2017-2026 F-150 Raptor with the 3.5L twin-turbo V6 it lets the factory sensor reach its new position on an aftermarket intake.
Why it matters. Depending on the year and engine, the IAT sensor sits closer to the air filter or closer to the turbo inlet tube. Many aftermarket intakes move it, and the factory wiring may not reach. This extension solves that without splicing.
Quality wiring. aFe builds it from high-quality wire and looming with factory-style 2-pin connectors. It lets the factory sensor sit up to 12 in from its original location.
Fast install. Plug and play, in under 10 minutes.
Features
- 12 in (305 mm) length
- Factory-style 2-pin connectors, plug and play, no modifications
- High-quality looming and wire harness
- 100% of units tested for reliability
- Compatible with other aFe POWER performance products
Emissions: aFe states this product does not require a CARB EO number.
Fitment: aFe's application list covers the 2015-2026 Ford F-150 with the V6-2.7L (tt) and V6-3.5L (tt) EcoBoost engines. It does not name the Raptor as its own row. The 2017-2026 F-150 Raptor uses the 3.5L EcoBoost, so it falls within the listed engine and years; the 5.2L supercharged Raptor R is not listed. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor (V6-3.5L (tt) EcoBoost) |
| 2015-2026 | Ford | F-150 | V6-2.7L (tt) EcoBoost |
| 2015-2026 | Ford | F-150 | V6-3.5L (tt) EcoBoost |
The aFe Magnum FLOW Pro 5R is a drop-in replacement for the factory air filter on the Ford F-150 Raptor. It swaps straight into the stock airbox, so there is no intake to rework, and it uses a pre-oiled cotton gauze element in place of the paper filter Ford fits at the factory.
Five layers of pre-oiled cotton gauze. The Pro 5R media is built from five progressively finer layers that keep flowing even when the filter is dirty. aFe describes it as suited to street and track use, and the filter ships already oiled. aFe's page cites up to a 17 percent flow increase over stock.
Deep, rounded pleats. The evenly spaced, open pleats give the filter more usable surface area, which raises flow and lets it hold more dust between services.
Progressive bump seal. The soft sealing surface conforms to the airbox, even where it is uneven, so you get a tight fit without gaskets or sealant, and it returns to its original shape every time you refit it.
Full polyurethane frame. The frame is molded polyurethane on all sides. Unlike many materials, polyurethane holds its shape through repeated heat cycles in the engine bay.
Washable and reusable. When it is dirty, clean it with aFe POWER Cleaner and recharge it with aFe's blue filter oil. It can be cleaned and reused for multiple cycles.
Features
- Five layers of progressive, pre-oiled cotton gauze media (Pro 5R)
- Drop-in fit in the factory airbox
- Deep, open, evenly spaced pleats for flow and dust capacity
- Progressive bump seal for a leak-free fit
- 100% polyurethane frame on all sides
- Washable and reusable for multiple cleaning cycles
Emissions. aFe states that this product does not require a CARB EO number.
Fitment: aFe lists this filter for the 2010 F-150 SVT Raptor with the 5.4L V8, the 2010-2014 SVT Raptor with the 6.2L V8, and the 2017-2025 F-150 Raptor with the 3.5L EcoBoost V6. It does not fit the F-150 Raptor R (5.2L supercharged V8), which uses a different air filter. Fitment confirmed against aFe's published application list.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2017-2025 | Ford | F-150 | Raptor |
| 2009-2010 | Ford | F-150 | V8-4.6L |
| 2009-2010 | Ford | F-150 | V8-5.4L |
| 2011-2014 | Ford | F-150 | V6-3.7L |
| 2011-2014 | Ford | F-150 | V8-6.2L |
| 2011-2025 | Ford | F-150 | V6-3.5L (tt) |
| 2011-2025 | Ford | F-150 | V8-5.0L |
| 2015-2025 | Ford | F-150 | V6-2.7L (tt) |
| 2018-2021 | Ford | F-150 | V6-3.0L (td) Diesel |
| 2018-2023 | Ford | F-150 | V6-3.3L |
| 2021-2025 | Ford | F-150 | V6-3.5L (tt) Hybrid |
| 2007-2014 | Ford | Expedition | V8-5.4L |
| 2015-2026 | Ford | Expedition | V6-3.5L (tt) |
| 2008-2010 | Ford | F-250 Super Duty | V10-6.8L |
| 2008-2010 | Ford | F-250 Super Duty | V8-5.4L |
| 2011-2016 | Ford | F-250 Super Duty | V8-6.2L |
| 2008-2010 | Ford | F-350 Super Duty | V10-6.8L |
| 2008-2010 | Ford | F-350 Super Duty | V8-5.4L |
| 2011-2016 | Ford | F-350 Super Duty | V8-6.2L |
| 2008-2016 | Ford | F-450 Super Duty | V10-6.8L |
| 2008-2016 | Ford | F-550 Super Duty | V10-6.8L |
| 2008-2014 | Ford | F53 | V10-6.8L |
| 2007-2014 | Lincoln | Navigator | V8-5.4L |
| 2015-2026 | Lincoln | Navigator | V6-3.5L (tt) |
The aFe Magnum FLOW Pro DRY S is a drop-in replacement for the factory air filter on the Ford F-150 Raptor. It fits the stock airbox with no changes and uses a dry synthetic element in place of Ford's paper filter, so there is no oil to apply or to worry about near the sensors.
Three layers of dry synthetic media. The Pro DRY S media is built from three progressively layered, oil-free sheets. aFe describes it as the easiest of its performance filters to maintain and best suited to street use. aFe's airflow chart for this filter shows 780 CFM against 587 CFM for the stock filter, measured at 1.5 in. H2O.
Deep, rounded pleats. The evenly spaced, open pleats give more usable surface area, which supports flow and dust-holding capacity between services.
Progressive bump seal. The soft sealing surface conforms to the airbox, even where it is uneven, so you get a tight, leak-free fit with no gaskets or sealant.
Full polyurethane frame. The frame is molded polyurethane on all sides, a material that keeps its shape through repeated heat cycles in the engine bay.
Washable and reusable. Clean it and recharge it with aFe POWER Cleaner for dry filters, let it dry, and refit it. It can be cleaned and reused for multiple cycles.
Features
- Three layers of progressive oil-free synthetic media (Pro DRY S)
- Drop-in fit in the factory airbox
- Deep, open, evenly spaced pleats for flow and dust capacity
- Progressive bump seal for a leak-free fit
- 100% polyurethane frame on all sides
- Washable and reusable for multiple cleaning cycles
Emissions. aFe states that this product does not require a CARB EO number.
Fitment: aFe lists this filter for the 2010 F-150 SVT Raptor with the 5.4L V8, the 2010-2014 SVT Raptor with the 6.2L V8, and the 2017-2025 F-150 Raptor with the 3.5L EcoBoost V6. It does not fit the F-150 Raptor R (5.2L supercharged V8), which uses a different air filter. Fitment confirmed against aFe's published application list.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2017-2025 | Ford | F-150 | Raptor |
| 2009-2010 | Ford | F-150 | V8-4.6L |
| 2009-2010 | Ford | F-150 | V8-5.4L |
| 2011-2014 | Ford | F-150 | V6-3.7L |
| 2011-2014 | Ford | F-150 | V8-6.2L |
| 2011-2025 | Ford | F-150 | V6-3.5L (tt) |
| 2011-2025 | Ford | F-150 | V8-5.0L |
| 2015-2025 | Ford | F-150 | V6-2.7L (tt) |
| 2018-2021 | Ford | F-150 | V6-3.0L (td) Diesel |
| 2018-2023 | Ford | F-150 | V6-3.3L |
| 2021-2025 | Ford | F-150 | V6-3.5L (tt) Hybrid |
| 2007-2014 | Ford | Expedition | V8-5.4L |
| 2015-2026 | Ford | Expedition | V6-3.5L (tt) |
| 2008-2010 | Ford | F-250 Super Duty | V10-6.8L |
| 2008-2010 | Ford | F-250 Super Duty | V8-5.4L |
| 2011-2016 | Ford | F-250 Super Duty | V8-6.2L |
| 2008-2010 | Ford | F-350 Super Duty | V10-6.8L |
| 2008-2010 | Ford | F-350 Super Duty | V8-5.4L |
| 2011-2016 | Ford | F-350 Super Duty | V8-6.2L |
| 2008-2016 | Ford | F-450 Super Duty | V10-6.8L |
| 2008-2016 | Ford | F-550 Super Duty | V10-6.8L |
| 2008-2014 | Ford | F53 | V10-6.8L |
| 2007-2014 | Lincoln | Navigator | V8-5.4L |
| 2015-2026 | Lincoln | Navigator | V6-3.5L (tt) |
The aFe Magnum FLOW Pro 5R is a direct-fit replacement for the factory air filter on the 3.0L EcoBoost Bronco Raptor and Ranger Raptor. It uses five layers of pre-oiled cotton gauze media, so it arrives ready to install and flows well even as it collects dust.
Five layers of pre-oiled cotton gauze. The progressive layering lets the filter keep flowing at a high level when it is dirty. aFe describes the media as right for street and track use, and the filter can be recharged with aFe POWER Cleaner and blue air filter oil.
Rounded, deep, open pleats. The evenly spaced pleats provide more usable filter surface area, which raises flow and increases how much dust the filter can hold.
Progressive bump seal. The pliable sealing surface conforms to even an uneven filter housing, so the filter seats and seals every time without gaskets or sealants, and it returns to its original form when you refit it.
Full polyurethane frame. The frame is a 360-degree polyurethane mold. Unlike materials that degrade after repeated heat cycles in an engine bay, polyurethane keeps its shape.
Features
- Five layers of progressive pre-oiled cotton gauze media (Pro 5R)
- Direct-fit replacement for the factory filter
- Deep, open pleats for surface area, flow and dust capacity
- Progressive bump seal with a full polyurethane frame
- Washable and reusable for multiple cleaning cycles
Emissions. aFe states that this product does not require a CARB EO number.
Fitment: aFe lists this filter for the 2022-2026 Ford Bronco Raptor and the 2024-2026 Ford Ranger Raptor, both with the 3.0L twin-turbo EcoBoost V6. Fitment confirmed against aFe's published application list.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Ford | Bronco | Raptor |
| 2024-2026 | Ford | Ranger | Raptor |
The aFe Magnum FLOW Pro DRY S is a direct-fit replacement for the factory air filter on the 3.0L EcoBoost Bronco Raptor and Ranger Raptor. It uses three layers of oil-free synthetic media, so there is no filter oil to apply and it is the easiest of aFe's performance filters to maintain.
Three layers of dry synthetic media. The progressive layering gives good filtration efficiency and dust-holding capacity. aFe says this media is best suited to street use, and the filter can be recharged with aFe POWER Cleaner.
Rounded, deep, open pleats. The evenly spaced pleats provide more usable filter surface area, which raises flow and increases how much dust the filter can hold.
Progressive bump seal. The pliable sealing surface conforms to even an uneven filter housing, so the filter seats and seals every time without gaskets or sealants, and it returns to its original form when you refit it.
Full polyurethane frame. The frame is a 360-degree polyurethane mold. Unlike materials that degrade after repeated heat cycles in an engine bay, polyurethane keeps its shape.
Features
- Three layers of progressive oil-free synthetic media (Pro DRY S)
- Direct-fit replacement for the factory filter
- Deep, open pleats for surface area, flow and dust capacity
- Progressive bump seal with a full polyurethane frame
- Washable and reusable for multiple cleaning cycles
Emissions. aFe states that this product does not require a CARB EO number.
Fitment: aFe lists this filter for the 2022-2026 Ford Bronco Raptor and the 2024-2026 Ford Ranger Raptor, both with the 3.0L twin-turbo EcoBoost V6. Fitment confirmed against aFe's published application list.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Ford | Bronco | Raptor |
| 2024-2026 | Ford | Ranger | Raptor |
This replacement vent tube insert is made for aFe POWER cold air intake systems on the Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6. It pushes into the vent fitting on the factory tube so the engine still pulls the right amount of vacuum after an aFe intake is installed. If you lose or break the original insert, this part replaces it.
Helps prevent the P04DB check engine light. With the insert in place the vent fitting draws the ideal amount of vacuum after the intake is fitted, which keeps the P04DB code from appearing. Refer to the intake's installation manual for the correct way to fit it.
Durable nylon construction. The insert is injection molded from nylon, so it is durable and easy to install. It is a direct replacement for aFe part number 05-01405.
Made for aFe intakes. aFe designed this insert for its own cold air intake systems and does not recommend it with any other intake.
Features
- Prevents the P04DB check engine light after installing an aFe intake
- Direct replacement for lost or broken vent inserts (replaces 05-01405)
- Injection-molded nylon construction
- For aFe POWER cold air intake systems on 3.5L EcoBoost F-150 and Raptor trucks
Emissions
aFe states this product does not require a CARB EO number.
Fitment: aFe lists this vent insert for the 2017-2026 Ford F-150 Raptor and the 2016-2026 Ford F-150 with the 3.5L V6 twin-turbo EcoBoost. It is not listed for the 2023-2026 Raptor R. Fitment confirmed against aFe's published application list.
Guides & Manuals
Vent Insert Tube Tech Tip (video)This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2016-2026 | Ford | F-150 | 3.5L V6 EcoBoost |
This pair of aFe Magnum FORCE replacement air filters is the service element for aFe's dual 3-1/2 in Rapid Induction cold air intake on the 2017-2020 Ford F-150 Raptor. Each conical filter uses three layers of progressively finer synthetic media between a polyurethane top and base, so it breathes freely and never needs filter oil.
Oil-free and easy to maintain. The Pro DRY S media is dry, so there is no oil to apply after a cleaning. When the filters get dirty, wash them with soap and water, let them dry and refit them. aFe designs them to be washed and reused for multiple cleaning cycles.
Tall pleats hold more dust. The open, evenly spaced pleats give the media a large working surface, which stretches the time between cleanings. aFe lists a filter efficiency of 99.2 percent.
A flange that seals. The soft polyurethane flange has molded bumps that press against the intake tube for a tight, leak-free seal that lasts the life of the filter.
Size and pairing. Each filter measures 3-1/2 in at the flange, 5 in at the base, 3-1/2 in at the top and 7 in tall, and the set is sold as one pair. aFe's Magnum SHIELD black pre-filter pair, part 28-10213M, is made for filters of this size.
Features
- Pair of conical replacement filters, 3-1/2 in flange x 5 in base x 3-1/2 in top x 7 in tall
- Three layers of progressive synthetic Pro DRY S media, no oil needed
- 100% polyurethane top and base
- Washable and reusable for multiple cleaning cycles
- 99.2 percent filter efficiency
- Polyurethane flange with integrated bumps for a tight seal
Emissions. aFe states that this product does not require a CARB EO number.
Fitment: aFe's page for this filter pair does not list vehicles. aFe lists its dual 3-1/2 in Rapid Induction intake 54-12972-B for the 2017-2020 Ford F-150 Raptor with the 3.5L EcoBoost, and the filter that intake uses (the Pro 5R pair 24-90069M) is the same 3-1/2 in x 5 in x 7 in size as this Pro DRY S pair. Fitment confirmed against aFe's published application list for that intake.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
The aFe POWER Magnum FORCE Stage-2 cold air intake replaces the factory airbox and inlet tubing on the 2021-2026 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6. This version uses a pre-oiled Pro 5R filter for maximum flow. aFe rates it at 785 CFM at 7 in H2O and shows dyno gains of up to +20 HP and +18 lb-ft of torque.
Open-element housing with a built-in scoop. The one-piece cross-linked polyethylene (XLPE) housing leaves the filter on show, gives a more aggressive intake sound, and its built-in scoop pulls cold air from the top of the radiator support. It uses the vehicle's OE air inlet.
Large five-layer filter. The 9 in tall 360-degree radial-flow filter has a 5-1/2 in flange and pre-oiled Pro 5R media with five layers of progressively finer cotton gauze. aFe says it moves the largest amount of air and gives the highest power gains in most cases, and rates it for street and track use. The inverted top adds surface area for longer service intervals, and the filter is washable and reusable.
Dyno-tuned tube. The computer-designed intake tube is made of heat-soak-resistant XLPE and is tuned on aFe's dyno for power while keeping a factory-quality fit.
Direct bolt-on install. The system uses factory mounting locations and needs no cutting or drilling. aFe quotes roughly 30 minutes. Stainless-steel clamps and silicone couplings are included.
Features
- Up to +20 HP and +18 lb-ft on aFe's dyno
- Measured flow of 785 CFM at 7 in H2O
- Washable, reusable Pro 5R air filter for maximum performance
- Open-element XLPE housing with built-in cold-air scoop
- Computer-designed, dyno-tuned intake tube
- Factory mounting locations, no cutting or drilling
- Stainless-steel clamps and silicone couplings included
Emissions: aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the 2021-2026 Ford F-150 Raptor with the V6-3.5L (tt) EcoBoost, and also the 2021-2026 F-150 3.5L EcoBoost. The 5.2L supercharged Raptor R is not listed, and aFe says this system will not fit an F-150 with the 3.5L PowerBoost hybrid. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | V6-3.5L (tt) EcoBoost |
The aFe POWER Magnum FORCE Stage-2 cold air intake replaces the factory airbox and inlet tubing on the 2023-2026 Ford F-150 Raptor R with the 5.2L supercharged V8. It uses a pre-oiled Pro 5R filter for maximum flow. aFe rates it at 690 CFM at 7 in H2O and shows dyno gains of up to +16 HP and +16 lb-ft of torque.
Open-element housing with a built-in scoop. The one-piece cross-linked polyethylene (XLPE) housing leaves the filter on show, gives a more aggressive intake sound, and its built-in scoop pulls cold air from the top of the radiator support. It uses the factory air inlet.
Large five-layer filter. The 9 in tall 360-degree radial-flow filter has a 5-1/2 in flange and pre-oiled Pro 5R media with five layers of progressively finer cotton gauze. aFe says it moves the largest amount of air and gives the highest power gains in most cases, and rates it for street and track use. The filter is washable and reusable.
Dyno-tuned tube. The computer-designed intake tube is made of heat-soak-resistant XLPE and is tuned on aFe's dyno for power while keeping a factory-quality fit.
Direct bolt-on install. The system uses factory mounting locations and needs no cutting or drilling. aFe quotes roughly 30 minutes. Stainless-steel clamps and a silicone bellow coupling are included.
Features
- Up to +16 HP and +16 lb-ft on aFe's dyno
- Measured flow of 690 CFM at 7 in H2O, 37% more than the factory intake
- Washable, reusable Pro 5R air filter for maximum performance
- Open-element XLPE housing with built-in cold-air scoop
- Computer-designed, dyno-tuned intake tube
- Factory mounting locations, no cutting or drilling
- Stainless-steel clamps and silicone coupling included
Emissions: aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists only the 2023-2026 Ford F-150 Raptor R with the V8-5.2L (sc). It is not listed for the 3.5L F-150 Raptor. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2026 | Ford | F-150 Raptor R | V8-5.2L (sc) |
The aFe POWER Magnum FORCE Stage-2 cold air intake replaces the factory airbox and inlet tubing on the 2021-2026 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6. This version uses an oil-free Pro DRY S filter. aFe rates it at 730 CFM at 7 in H2O and shows dyno gains of up to +15 HP and +14 lb-ft of torque.
Open-element housing with a built-in scoop. The one-piece cross-linked polyethylene (XLPE) housing leaves the filter on show, gives a more aggressive intake sound, and its built-in scoop pulls cold air from the top of the radiator support. It uses the factory air inlet.
Large oil-free filter. The 9 in tall 360-degree radial-flow filter has a 5-1/2 in flange and three layers of synthetic media, so it needs no oil. aFe says this media suits street use. The inverted top adds surface area for longer service intervals, and the filter is washable and reusable.
Dyno-tuned tube. The computer-designed intake tube is made of heat-soak-resistant XLPE and is tuned on aFe's dyno for power while keeping a factory-quality fit.
Direct bolt-on install. The system uses factory mounting locations and needs no cutting or drilling. aFe quotes roughly 30 minutes. Stainless-steel clamps and silicone couplings are included.
Features
- Up to +15 HP and +14 lb-ft on aFe's dyno
- Measured flow of 730 CFM at 7 in H2O
- Washable, reusable Pro DRY S air filter
- Open-element XLPE housing with built-in cold-air scoop
- Computer-designed, dyno-tuned intake tube
- Factory mounting locations, no cutting or drilling
- Stainless-steel clamps and silicone couplings included
Emissions: aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the 2021-2026 Ford F-150 Raptor with the V6-3.5L (tt) EcoBoost, and also the 2021-2026 F-150 3.5L EcoBoost. The 5.2L supercharged Raptor R is not listed, and aFe says this system will not fit an F-150 with the 3.5L PowerBoost hybrid. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | V6-3.5L (tt) EcoBoost |
The aFe Magnum FORCE Stage-2 Intake System Cover, part 54-12068, is a vacuum-formed black ABS cover that bolts over the intake housing of an aFe Stage-2 cold air intake. On the 2010-2014 Ford F-150 SVT Raptor it is the finishing piece for the aFe Rapid Induction intake 54-11902-1, giving the engine bay a clean, stealthy look.
Stealthy look under the hood. The cover hides the intake housing and carries an aFe badge, for a clean, aggressive appearance that does not give up any performance.
Quieter intake. aFe says Stage-2 covers also cut noise from the intake housing.
Debris protection. The cover keeps large debris from settling in the intake housing.
Easy installation. The cover is vacuum formed to fit and bolts straight to the intake housing, with no cutting or drilling.
Features
- Vacuum-formed durable ABS plastic
- Stealthy look under the hood
- Noise reduction without hurting performance
- No cutting or drilling for easy installation
Emissions
aFe states this product does not require a CARB EO number.
Fitment
Fitment: aFe lists this cover by the intake kits it fits rather than by vehicle: aFe Magnum FORCE Stage-2 intake systems 54-11962-1B, 51-11962-1B, 54-11972-1B, 51-11972-1B, 54-11902-1, 51-11902-1, 54-11842-B, 51-11842-B, 54-12592, 51-12592, 54-11622-B and 51-11622-B. For the Raptor, the matching kit is 54-11902-1, which aFe lists for the 2010-2014 Ford F-150 SVT Raptor with the V8-6.2L engine. Fitment confirmed against aFe's published compatibility note and application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor (with aFe intake 54-11902-1) |
aFe Magnum SHIELD pre-filters slip over a conical performance air filter and catch large debris, such as leaves, bugs and coarse dust, before it can reach the filter media. This black pair is made for the aFe EcoBoost Stage-2 filters (24-90069M and the same-size Pro DRY S version) that ship in aFe's dual 3-1/2 in Rapid Induction intake for the 2017-2020 Ford F-150 Raptor.
Protects the filter and stretches cleaning intervals. By stopping large particles at the surface, the pre-filter reduces how fast the filter beneath it clogs, so you clean the main filter less often.
Does not restrict airflow. The pre-filter is a dry weave fabric. It does not attract dirt, and it cleans with soap and water.
Built to last. It is made from rugged polyester that can be cleaned and reused.
Easy to fit. Each pre-filter is sized to match its filter, and a built-in elastic retainer holds it on tightly while keeping filter service simple. The kit comes with two pre-filters.
Features
- Pair of black pre-filters (2 pieces)
- Made for filters with a 5 in base diameter, 3.5 in top diameter and 7 in height
- Dry weave polyester fabric that does not restrict flow
- Built-in elastic retainer
- Washable with soap and water
Emissions. aFe states that this product does not require a CARB EO number.
Fitment: aFe lists this pre-filter pair as confirmed for its 24-90069M filters, which are used on aFe cold air intakes 54-12182, 54-12192, 54-12642-1B and 54-12972-B. aFe lists intake 54-12972-B for the 2017-2020 Ford F-150 Raptor with the 3.5L EcoBoost. Fitment confirmed against aFe's published application list.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
This aFe MagnumFORCE Stage-2 intake cover is a molded black shield that bolts over the intake housing of an aFe intake system on your 2017-2020 Ford F-150 Raptor. It gives the engine bay a clean, stealthy look and helps keep large debris out of the housing, without changing how the intake performs.
Quieter, cleaner intake bay. aFe designs its Stage-2 covers to cut intake noise and hide the filter housing, so the under-hood view stays tidy and understated while the intake does its work.
Debris protection where it counts. The cover sits over the intake housing and keeps larger debris from settling inside it, which matters on a truck that sees dirt roads, sand and trail dust.
Tough, vacuum-formed ABS. The cover is made of durable ABS plastic with a textured black finish and a small aFe emblem. Vacuum forming gives it a close, factory-style fit around the housing.
Simple bolt-on install. aFe states that no cutting or drilling is needed. The cover bolts straight to the intake housing, so most owners can fit it with basic hand tools.
Features
- No cutting or drilling for an easy installation
- Stealthy look under the hood
- Made of durable ABS plastic
- Vacuum-formed fit
Emissions: aFe states this product does not require a CARB Executive Order number.
Fitment: aFe publishes no separate vehicle list for this cover. aFe lists it as fitting its Stage-2 and Rapid Induction intake systems, which include the 2017-2020 F-150 Raptor intake systems (for example the Rapid Induction 51-32972-B). It fits as an add-on to a compatible aFe intake system, not as a stand-alone part.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
The aFe POWER Momentum GT is a sealed cold air intake for the 2017-2020 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6. It pairs a one-piece sealed housing with a pre-oiled Pro 5R filter. aFe shows dyno gains of up to +22 HP and +26 lb-ft of torque and says it outflows the factory intake by 43%.
One-piece sealed housing. The smooth one-piece housing replaces multi-piece boxes so the engine draws the coolest air charge available. A large clear sight window lets you inspect the filter without taking anything apart.
Roto-molded intake tube. The computer-designed, dyno-tuned roto-molded tube is shaped for maximum power gains with a factory-quality fit.
Big five-layer filter. The Momentum GT is built around a pre-oiled 9 in tall conical, inverted-top, 360-degree radial-flow filter with five layers of progressively finer cotton gauze media. aFe's filter-to-housing interface allows the largest possible filter, which increases available air volume and simplifies installation.
Premium hardware. A stainless-steel T-bolt clamp and silicone couplings give a secure, durable seal. The kit needs no cutting or drilling on factory parts.
Features
- Up to +22 HP and +26 lb-ft on aFe's dyno
- 43% more flow than the factory intake
- Pre-oiled, washable Pro 5R filter media for maximum performance
- One-piece sealed housing with a built-in sight window
- Computer-designed roto-molded intake tube
- Stainless-steel T-bolt clamp and silicone couplings
- No cutting or drilling on factory parts
Emissions: aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the 2017-2020 Ford F-150 Raptor with the V6-3.5L (tt) EcoBoost, and also the 2017-2020 F-150 3.5L EcoBoost. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
| 2017-2020 | Ford | F-150 | V6-3.5L (tt) EcoBoost |
The aFe POWER Momentum GT cold air intake replaces the factory airbox and inlet tubing on the 2022-2026 Ford Bronco Raptor with the 3.0L twin-turbo EcoBoost V6. This version uses a pre-oiled Pro 5R filter for maximum flow. aFe's flow bench measured 390 CFM at 7 in H2O against 330 CFM for the stock intake, 18% more airflow, and its dyno testing showed gains of up to +10 HP and +17 lb-ft of torque.
Pre-oiled Pro 5R media. This 360-degree radial-flow filter uses five layers of progressively finer cotton gauze. aFe says Pro 5R passes the largest amount of air of its media options and usually gives the biggest power gains, and rates it for street and track use. The inverted top adds filter surface area for longer service intervals, and the filter is washable and reusable.
One-piece sealed housing. The housing is heat-resistant cross-linked polyethylene (XLPE) with aFe's filter-to-housing interface, which keeps the part count low and the install simple. A large clear sight window lets you check the filter without disassembly, and the housing incorporates the factory air inlet scoop.
Dyno-tuned intake tubes. The computer-designed XLPE tubes resist heat soak and are tuned for power gains while keeping a factory-quality fit. Stainless-steel clamps and silicone couplings give a secure, flexible seal.
Features
- Up to +10 HP and +17 lb-ft on aFe's dyno
- Flows 390 CFM at 7 in H2O, 18% more than the factory intake
- Washable, reusable Pro 5R air filter for maximum performance
- Large clear sight window for filter inspection without disassembly
- Utilizes factory mounting locations for an easy, secure install
- Premium clamps and silicone couplings for a secure seal
Emissions: aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the 2022-2026 Ford Bronco Raptor with the V6-3.0L (tt) EcoBoost, and no other vehicle. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Ford | Bronco | Raptor |
The aFe POWER Momentum GT cold air intake replaces the factory airbox and inlet tubing on the 2024-2026 Ford Ranger Raptor with the 3.0L twin-turbo EcoBoost V6. This version uses a pre-oiled Pro 5R filter for maximum flow. aFe's flow bench measured 355 CFM at 7 in H2O against 320 CFM for the stock intake, 11% more airflow, and its dyno testing showed gains of up to +17 HP and +18 lb-ft of torque.
Pre-oiled Pro 5R media. This 360-degree radial-flow filter uses five layers of progressively finer cotton gauze. aFe says Pro 5R passes the largest amount of air of its media options and usually gives the biggest power gains, and rates it for street and track use. The inverted top adds filter surface area for longer service intervals, and the filter is washable and reusable.
One-piece sealed housing. The housing is heat-resistant cross-linked polyethylene (XLPE) with aFe's filter-to-housing interface, which keeps the part count low and the install simple. A large clear sight window lets you check the filter without disassembly, and the housing incorporates the factory air inlet scoop.
Dyno-tuned intake tubes. The computer-designed XLPE tubes resist heat soak and are tuned for power gains while keeping a factory-quality fit. Stainless-steel clamps and silicone couplings give a secure, flexible seal.
Features
- Up to +17 HP and +18 lb-ft on aFe's dyno
- Flows 355 CFM at 7 in H2O, 11% more than the factory intake
- Washable, reusable Pro 5R air filter for maximum performance
- Large clear sight window for filter inspection without disassembly
- Utilizes factory mounting locations for an easy, secure install
- Premium clamps and silicone couplings for a secure seal
Emissions: aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the 2024-2026 Ford Ranger Raptor with the V6-3.0L (tt) EcoBoost, and no other vehicle. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The aFe POWER Momentum GT cold air intake replaces the factory airbox and inlet tubing on the 2017-2020 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6. It combines a sealed one-piece housing, a roto-molded intake tube and a large 9 in tall oil-free Pro DRY S filter. aFe's flow chart for this part shows 595 CFM at 7 in H2O with the Pro DRY S filter against 450 CFM for the stock intake.
Sealed one-piece housing. The smooth one-piece housing replaces the multi-piece factory design and helps keep the intake charge as cool as possible. A large clear sight window lets you check the filter without taking anything apart.
Large oil-free Pro DRY S filter. The 360-degree radial-flow conical filter has an inverted top and three layers of progressively finer synthetic media, so it filters well without oil. aFe's patent-pending filter-to-housing interface allows the largest filter possible, which raises the available air volume and keeps installation simple.
Dyno-tuned roto-molded tube. The computer-designed tube is built to deliver power gains while keeping a factory-quality fit.
Premium hardware. A stainless-steel T-bolt clamp and silicone couplers give a strong, flexible seal. Momentum GT intakes use fewer parts for a quick install, with no cutting or drilling on factory parts.
Features
- Computer-designed, roto-molded intake tube
- One-piece sealed housing
- Pro DRY S oil-free three-layer synthetic media, washable and reusable
- Built-in sight window for easy filter inspection
- Unique filter-to-housing interface for easy servicing
- No cutting or drilling on factory parts
Emissions: aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the 2017-2020 Ford F-150 Raptor with the V6-3.5L (tt) EcoBoost, so this intake fits the 2017, 2018, 2019 and 2020 Raptor and not the 2010-2014 SVT Raptor or the 5.2L Raptor R. aFe also lists the 2017-2020 F-150 3.5L EcoBoost. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
| 2017-2020 | Ford | F-150 | V6-3.5L (tt) EcoBoost |
The aFe POWER Momentum GT cold air intake replaces the factory airbox and inlet duct on the 2021-2026 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6. This version uses an oil-free Pro DRY S filter. aFe's flow bench measured 695 CFM at 7 in H2O against 445 CFM for the stock intake, and its dyno testing showed gains of up to +8 HP and +10 lb-ft of torque.
The largest filter that fits. Momentum's filter-to-housing interface was built to hold the biggest air filter possible: a 9 in tall, 360-degree radial-flow filter with an inverted top that adds surface area and stretches service intervals.
Oil-free Pro DRY S media. Three layers of synthetic media filter well and hold dust without oil, so there is no oiling step after cleaning. aFe rates this media for street and light off-road use. The filter is washable and reusable.
One-piece sealed housing. The housing is heat-resistant cross-linked polyethylene (XLPE) with a large clear sight window, so you can check the filter without taking anything apart. It incorporates the factory air inlet scoop, and a silicone seal at the inlet closes against the hood to keep hot engine air out.
Dyno-tuned tube and quality hardware. The computer-designed XLPE intake tube resists heat soak. Stainless-steel clamps and silicone couplings give a secure, flexible seal, and the system uses fewer parts for a quick install.
Features
- Up to +8 HP and +10 lb-ft on aFe's dyno
- Flows 695 CFM at 7 in H2O, 56% more than the factory intake
- Washable, reusable Pro DRY S air filter, no oil required
- Large clear sight window for filter inspection without disassembly
- Sealed housing incorporates the factory hood inlet scoop and grille air inlet
- Premium clamps and silicone couplings for a secure seal
- Uses factory mounting locations
Emissions: aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the 2021-2026 Ford F-150 Raptor with the V6-3.5L (tt) EcoBoost. The 5.2L supercharged Raptor R is not listed. aFe also lists the 2021-2026 F-150 3.5L EcoBoost, the 2022-2026 Expedition and the 2022-2026 Lincoln Navigator with the same engine. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | V6-3.5L (tt) EcoBoost |
| 2022-2026 | Ford | Expedition | V6-3.5L (tt) EcoBoost |
| 2022-2026 | Lincoln | Navigator | V6-3.5L (tt) EcoBoost |
The aFe POWER Momentum GT cold air intake replaces the factory airbox and inlet tubing on the 2022-2026 Ford Bronco Raptor with the 3.0L twin-turbo EcoBoost V6. This version uses an oil-free Pro DRY S filter. aFe's flow bench measured 385 CFM at 7 in H2O against 330 CFM for the stock intake, 17% more airflow, and its dyno testing showed gains of up to +6 HP and +10 lb-ft of torque.
Oil-free Pro DRY S media. This 360-degree radial-flow filter uses three layers of synthetic media that filter well and hold dust without oil, so there is no oiling step after cleaning. aFe rates it for street and light off-road use. The inverted top adds filter surface area for longer service intervals, and the filter is washable and reusable.
One-piece sealed housing. The housing is heat-resistant cross-linked polyethylene (XLPE) with aFe's filter-to-housing interface, which keeps the part count low and the install simple. A large clear sight window lets you check the filter without disassembly, and the housing incorporates the factory air inlet scoop.
Dyno-tuned intake tubes. The computer-designed XLPE tubes resist heat soak and are tuned for power gains while keeping a factory-quality fit. Stainless-steel clamps and silicone couplings give a secure, flexible seal.
Features
- Up to +6 HP and +10 lb-ft on aFe's dyno
- Flows 385 CFM at 7 in H2O, 17% more than the factory intake
- Washable, reusable Pro DRY S air filter, no oil required
- Large clear sight window for filter inspection without disassembly
- Utilizes factory mounting locations for an easy, secure install
- Premium clamps and silicone couplings for a secure seal
Emissions: aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the 2022-2026 Ford Bronco Raptor with the V6-3.0L (tt) EcoBoost, and no other vehicle. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Ford | Bronco | Raptor |
The aFe POWER Momentum GT cold air intake replaces the factory airbox and inlet tubing on the 2024-2026 Ford Ranger Raptor with the 3.0L twin-turbo EcoBoost V6. This version uses an oil-free Pro DRY S filter. aFe's flow bench measured 355 CFM at 7 in H2O against 320 CFM for the stock intake, 11% more airflow, and its dyno testing showed gains of up to +18 HP and +19 lb-ft of torque.
Oil-free Pro DRY S media. This 360-degree radial-flow filter uses three layers of synthetic media that filter well and hold dust without oil, so there is no oiling step after cleaning. aFe rates it for street and light off-road use. The inverted top adds filter surface area for longer service intervals, and the filter is washable and reusable.
One-piece sealed housing. The housing is heat-resistant cross-linked polyethylene (XLPE) with aFe's filter-to-housing interface, which keeps the part count low and the install simple. A large clear sight window lets you check the filter without disassembly, and the housing incorporates the factory air inlet scoop.
Dyno-tuned intake tubes. The computer-designed XLPE tubes resist heat soak and are tuned for power gains while keeping a factory-quality fit. Stainless-steel clamps and silicone couplings give a secure, flexible seal.
Features
- Up to +18 HP and +19 lb-ft on aFe's dyno
- Flows 355 CFM at 7 in H2O, 11% more than the factory intake
- Washable, reusable Pro DRY S air filter, no oil required
- Large clear sight window for filter inspection without disassembly
- Utilizes factory mounting locations for an easy, secure install
- Premium clamps and silicone couplings for a secure seal
Emissions: aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the 2024-2026 Ford Ranger Raptor with the V6-3.0L (tt) EcoBoost, and no other vehicle. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The aFe POWER Momentum GT cold air intake replaces the factory airbox and inlet duct on the 2021-2026 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6. This version uses the pre-oiled Pro 5R filter. aFe measured 780 CFM at 7 in of water, 75% more than the stock intake, with dyno gains of up to +13 HP and +15 lb-ft of torque.
The largest filter that fits. Momentum's filter-to-housing interface holds a 9 in tall, 360-degree radial-flow filter with an inverted top that adds surface area and stretches service intervals.
Five-layer Pro 5R media. Pre-oiled cotton gauze in five progressively finer layers gives top filtration and flow. aFe rates it for street use, and the filter is washable and reusable.
One-piece sealed housing. The cross-linked polyethylene (XLPE) housing has a large clear sight window so you can check the filter without taking anything apart. It incorporates the factory air inlet scoop, and a silicone seal closes against the hood to keep hot engine air out.
Dyno-tuned tube and quality hardware. The computer-designed XLPE tube resists heat soak. Stainless-steel clamps and silicone couplings give a secure, flexible seal, and the system uses fewer parts for a quick install.
Features
- Up to +13 HP and +15 lb-ft on aFe's dyno
- Flows 780 CFM at 7 in H2O, 75% more than the factory intake
- Washable, reusable pre-oiled Pro 5R air filter
- Large clear sight window for filter inspection without disassembly
- Sealed housing incorporates the factory hood inlet scoop and grille air inlet
- Premium clamps and silicone couplings for a secure seal
- Uses factory mounting locations
Emissions
aFe states this product is not currently CARB exempt. It is not available for purchase in California or for use on any vehicle registered with the California DMV.
Fitment: aFe lists the 2021-2026 Ford F-150 Raptor with the V6-3.5L (tt) EcoBoost. The 5.2L supercharged Raptor R is not listed. aFe also lists the 2021-2026 F-150 3.5L EcoBoost, the 2022-2026 Expedition and the 2022-2026 Lincoln Navigator with the same engine. It will not fit an F-150 with the 3.5L PowerBoost hybrid. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | V6-3.5L (tt) EcoBoost |
| 2022-2026 | Ford | Expedition | V6-3.5L (tt) EcoBoost |
| 2022-2026 | Lincoln | Navigator | V6-3.5L (tt) EcoBoost |
The aFe POWER Momentum GT Orange Edition cold air intake replaces the factory airbox and inlet tubing on the 2024-2026 Ford Ranger Raptor with the 3.0L twin-turbo EcoBoost V6. It is the same Momentum GT system as 50-70116D with an orange-colored housing and tubes, and it uses an oil-free Pro DRY S filter. aFe's flow bench measured 355 CFM at 7 in H2O against 320 CFM for the stock intake, 11% more airflow, and its dyno testing showed gains of up to +18 HP and +19 lb-ft of torque.
Orange Edition styling. The orange housing and tubes stand out against the engine bay and give the Ranger Raptor a custom look under the hood, without changing how the system fits or flows.
Oil-free Pro DRY S media. This 360-degree radial-flow filter uses three layers of synthetic media that filter well and hold dust without oil, so there is no oiling step after cleaning. aFe rates it for street and light off-road use. The inverted top adds filter surface area for longer service intervals, and the filter is washable and reusable.
One-piece sealed housing. The housing is heat-resistant cross-linked polyethylene (XLPE) with aFe's filter-to-housing interface, which keeps the part count low and the install simple. A large clear sight window lets you check the filter without disassembly, and the housing incorporates the factory air inlet scoop.
Dyno-tuned intake tubes. The computer-designed XLPE tubes resist heat soak and are tuned for power gains while keeping a factory-quality fit. Stainless-steel clamps and silicone couplings give a secure, flexible seal.
Features
- Up to +18 HP and +19 lb-ft on aFe's dyno
- Flows 355 CFM at 7 in H2O, 11% more than the factory intake
- Orange Edition housing and tubes
- Washable, reusable Pro DRY S air filter, no oil required
- Large clear sight window for filter inspection without disassembly
- Utilizes factory mounting locations for an easy, secure install
- Premium clamps and silicone couplings for a secure seal
Emissions: aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the 2024-2026 Ford Ranger Raptor with the V6-3.0L (tt) EcoBoost, and no other vehicle. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The aFe POWER Momentum XP cold air intake replaces the factory air box and inlet tubes on the 2021-2026 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6. This version has black tubes and a pre-oiled Pro 5R filter. aFe's flow bench measured 565 CFM against 445 CFM for the stock intake, 27% more airflow, and its dyno testing showed gains of up to +9 HP and +12 lb-ft of torque.
The largest filter that fits. The housing was designed around the biggest air filter possible: a 9 in tall, pre-oiled 360-degree radial-flow filter with two 3 in inlets. Its inverted top and large surface area give long life between cleanings.
Pre-oiled Pro 5R media. Five layers of progressively finer cotton gauze deliver high filtration and flow. aFe rates this media for street use. The filter is washable and reusable.
One-piece sealed housing. The housing is heat-resistant cross-linked polyethylene (XLPE) with a large clear sight window to check the filter without taking anything apart. It incorporates the factory hood inlet scoop and grille air inlet, and a silicone seal at the inlet seals to the hood to keep hot engine air out.
Dual 3 in intake tubes. Two mandrel-bent, wrinkle-black powder-coated aluminum tubes carry air from the filter to the turbos, with a balance hose connecting them. Stainless worm-gear clamps and silicone couplings give a secure, flexible seal. The system uses fewer parts for a quick install.
Features
- Up to +9 HP and +12 lb-ft on aFe's dyno
- Flows 565 CFM at 7 in H2O, 27% over the factory intake
- Washable, reusable pre-oiled Pro 5R air filter
- 3 in mandrel-bent wrinkle-black aluminum intake tubes
- Sealed housing with factory hood inlet scoop and grille inlet
- Large clear sight window for filter inspection
- Stainless clamps and silicone couplings
Emissions: aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the 2021-2026 Ford F-150 Raptor with the V6-3.5L (tt) EcoBoost. The 5.2L supercharged Raptor R is not listed. aFe also lists the 2021-2026 F-150 3.5L EcoBoost and PowerBoost, 2022-2026 Expedition and 2022-2026 Lincoln Navigator. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | V6-3.5L (tt) EcoBoost and PowerBoost hybrid |
| 2022-2026 | Ford | Expedition | V6-3.5L (tt) EcoBoost |
| 2022-2026 | Lincoln | Navigator | V6-3.5L (tt) EcoBoost |
The aFe POWER Momentum XP cold air intake replaces the factory air box and inlet tubes on the 2021-2026 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6. This version has black tubes and an oil-free Pro DRY S filter. aFe's flow bench measured 540 CFM against 445 CFM for the stock intake, 21% more airflow, and its dyno testing showed gains of up to +7 HP and +9 lb-ft of torque.
The largest filter that fits. The housing was designed around the biggest air filter possible: a 9 in tall, 360-degree radial-flow filter with two 3 in inlets. Its inverted top adds filter surface area for longer service intervals.
Oil-free Pro DRY S media. Three layers of synthetic media filter well and hold dust without oil, so there is no oiling step after cleaning. aFe rates this media for street and light off-road use. The filter is washable and reusable.
One-piece sealed housing. The housing is heat-resistant cross-linked polyethylene (XLPE) with a large clear sight window to check the filter without taking anything apart. It incorporates the factory hood inlet scoop and grille air inlet, and a silicone seal at the inlet seals to the hood to keep hot engine air out.
Dual 3 in intake tubes. Two mandrel-bent, wrinkle-black powder-coated aluminum tubes carry air from the filter to the turbos, with a balance hose connecting them. Stainless worm-gear clamps and silicone couplings give a secure, flexible seal. The system uses fewer parts for a quick install.
Features
- Up to +7 HP and +9 lb-ft on aFe's dyno
- Flows 540 CFM at 7 in H2O, 21% over the factory intake
- Washable, reusable Pro DRY S air filter, no oil required
- 3 in mandrel-bent wrinkle-black aluminum intake tubes
- Sealed housing with factory hood inlet scoop and grille inlet
- Large clear sight window for filter inspection
- Stainless clamps and silicone couplings
Emissions: aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the 2021-2026 Ford F-150 Raptor with the V6-3.5L (tt) EcoBoost. The 5.2L supercharged Raptor R is not listed. aFe also lists the 2021-2026 F-150 3.5L EcoBoost and PowerBoost, 2022-2026 Expedition and 2022-2026 Lincoln Navigator. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | V6-3.5L (tt) EcoBoost and PowerBoost hybrid |
| 2022-2026 | Ford | Expedition | V6-3.5L (tt) EcoBoost |
| 2022-2026 | Lincoln | Navigator | V6-3.5L (tt) EcoBoost |
The aFe POWER Momentum XP cold air intake replaces the factory air box and inlet tubes on the 2021-2026 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6. This version has blue powder-coated tubes and a pre-oiled Pro 5R filter. aFe's flow bench measured 565 CFM against 445 CFM for the stock intake, 27% more airflow, and its dyno testing showed gains of up to +9 HP and +12 lb-ft of torque.
The largest filter that fits. The housing was designed around the biggest air filter possible: a 9 in tall, pre-oiled 360-degree radial-flow filter with two 3 in inlets. Its inverted top and large surface area give long life between cleanings.
Pre-oiled Pro 5R media. Five layers of progressively finer cotton gauze deliver high filtration and flow. aFe rates this media for street use. The filter is washable and reusable.
One-piece sealed housing. The housing is heat-resistant cross-linked polyethylene (XLPE) with a large clear sight window to check the filter without taking anything apart. It incorporates the factory hood inlet scoop and grille air inlet, and a silicone seal at the inlet seals to the hood to keep hot engine air out.
Dual 3 in blue intake tubes. Two mandrel-bent, blue powder-coated aluminum tubes carry air from the filter to the turbos, with a balance hose connecting them. Stainless worm-gear clamps and silicone couplings give a secure, flexible seal. The system uses fewer parts for a quick install.
Features
- Up to +9 HP and +12 lb-ft on aFe's dyno
- Flows 565 CFM at 7 in H2O, 27% over the factory intake
- Washable, reusable pre-oiled Pro 5R air filter
- 3 in mandrel-bent blue powder-coated aluminum intake tubes
- Sealed housing with factory hood inlet scoop and grille inlet
- Large clear sight window for filter inspection
- Stainless clamps and silicone couplings
Emissions: aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the 2021-2026 Ford F-150 Raptor with the V6-3.5L (tt) EcoBoost. The 5.2L supercharged Raptor R is not listed. aFe also lists the 2021-2026 F-150 3.5L EcoBoost and PowerBoost, 2022-2026 Expedition and 2022-2026 Lincoln Navigator. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | V6-3.5L (tt) EcoBoost and PowerBoost hybrid |
| 2022-2026 | Ford | Expedition | V6-3.5L (tt) EcoBoost |
| 2022-2026 | Lincoln | Navigator | V6-3.5L (tt) EcoBoost |
The aFe POWER Momentum XP cold air intake replaces the factory air box and inlet tubes on the 2021-2026 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6. This version has blue powder-coated tubes and an oil-free Pro DRY S filter. aFe's flow bench measured 540 CFM against 445 CFM for the stock intake, 21% more airflow, and its dyno testing showed gains of up to +7 HP and +9 lb-ft of torque.
The largest filter that fits. The housing was designed around the biggest air filter possible: a 9 in tall, 360-degree radial-flow filter with two 3 in inlets. Its inverted top adds filter surface area for longer service intervals.
Oil-free Pro DRY S media. Three layers of synthetic media filter well and hold dust without oil, so there is no oiling step after cleaning. aFe rates this media for street and light off-road use. The filter is washable and reusable.
One-piece sealed housing. The housing is heat-resistant cross-linked polyethylene (XLPE) with a large clear sight window to check the filter without taking anything apart. It incorporates the factory hood inlet scoop and grille air inlet, and a silicone seal at the inlet seals to the hood to keep hot engine air out.
Dual 3 in blue intake tubes. Two mandrel-bent, blue powder-coated aluminum tubes carry air from the filter to the turbos, with a balance hose connecting them. Stainless worm-gear clamps and silicone couplings give a secure, flexible seal. The system uses fewer parts for a quick install.
Features
- Up to +7 HP and +9 lb-ft on aFe's dyno
- Flows 540 CFM at 7 in H2O, 21% over the factory intake
- Washable, reusable Pro DRY S air filter, no oil required
- 3 in mandrel-bent blue powder-coated aluminum intake tubes
- Sealed housing with factory hood inlet scoop and grille inlet
- Large clear sight window for filter inspection
- Stainless clamps and silicone couplings
Emissions: aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the 2021-2026 Ford F-150 Raptor with the V6-3.5L (tt) EcoBoost. The 5.2L supercharged Raptor R is not listed. aFe also lists the 2021-2026 F-150 3.5L EcoBoost and PowerBoost, 2022-2026 Expedition and 2022-2026 Lincoln Navigator. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | V6-3.5L (tt) EcoBoost and PowerBoost hybrid |
| 2022-2026 | Ford | Expedition | V6-3.5L (tt) EcoBoost |
| 2022-2026 | Lincoln | Navigator | V6-3.5L (tt) EcoBoost |
The aFe POWER Momentum XP is a sealed dual-tube cold air intake for the 2017-2020 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6. This -L version has blue powder-coated tubes and a pre-oiled dual-inlet Pro 5R filter. aFe shows dyno gains of up to +13 HP and +24 lb-ft of torque and says it outflows the factory intake by 29%.
One-piece sealed housing. The smooth one-piece housing replaces multi-piece boxes so the engine draws the coolest air charge available. A large clear sight window lets you inspect the filter without taking anything apart.
Equal-length 3 in tubes. Two 3 in mandrel-bent, blue powder-coated aluminum tubes of equal length are joined by an H-pipe to balance pressure and maximize airflow and velocity. aFe also includes an exclusive stainless-steel aFe POWER badge.
Dual-inlet five-layer filter. The pre-oiled, 7 in tall radial-flow filter has five layers of progressively finer cotton gauze media for maximum airflow and performance, and it is washable and reusable.
Direct bolt-on install. All clamps, couplings and hardware are included. The kit needs no cutting or drilling on factory parts.
Features
- Up to +13 HP and +24 lb-ft on aFe's dyno
- 29% more flow than the factory intake
- Dual-inlet Pro 5R pre-oiled, washable and reusable filter
- One-piece sealed housing with a built-in sight window
- 3 in mandrel-bent blue powder-coated aluminum equal-length tubes
- Stainless-steel aFe POWER badge, clamps, couplings and hardware included
- No cutting or drilling on factory parts
Emissions: aFe states this product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the 2017-2020 Ford F-150 Raptor with the V6-3.5L (tt) EcoBoost, and also the 2017-2020 F-150 3.5L EcoBoost. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
| 2017-2020 | Ford | F-150 | V6-3.5L (tt) EcoBoost |
The aFe Momentum XP Pro 5R Cold Air Intake System is a sealed, dual-tube intake for the 2017-2020 Ford F-150 Raptor and its 3.5L twin-turbo EcoBoost V6. It outflows the factory intake by 29 percent, and aFe's dyno testing shows gains of up to 13 HP and 24 lb-ft of torque. A sealed housing keeps the filter in the cool air stream so the engine breathes cooler, denser air.
One-piece sealed housing. The smooth, computer-designed housing replaces multi-piece boxes so the intake charge stays as cool as possible. A large clear sight window lets you inspect the filter without taking anything apart.
3 in equal-length intake tubes. Dual mandrel-bent, wrinkle-black powder-coated aluminum tubes are joined by an H-pipe that balances pressure between them for maximum airflow and velocity. A stainless steel aFe POWER badge is included.
Dual-inlet Pro 5R filter. The 7 in tall radial flow filter is pre-oiled and uses five layers of progressively finer cotton media for maximum airflow. It is washable and reusable. aFe's system flow test measures 580 CFM with the Pro 5R filter against 450 CFM for the stock intake.
Hassle-free installation. All clamps, couplings and hardware are included. It is a direct bolt-on kit with no cutting or drilling on factory parts.
Features
- Up to +13 HP and +24 lb-ft of torque in aFe's dyno testing
- 29 percent more flow than the factory intake
- Computer-designed one-piece sealed housing with sight window
- 3 in mandrel-bent aluminum equal-length tubes in wrinkle black
- Washable, reusable dual-inlet Pro 5R air filter
- No cutting or drilling on factory parts
Emissions
aFe states this product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists this intake for the 2017-2020 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6, and for 2017-2020 F-150 trucks with the same engine. It is listed for the Gen 2 Raptor only, not the 2021 and newer truck. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor 3.5L V6 EcoBoost |
| 2017-2020 | Ford | F-150 | 3.5L V6 EcoBoost |
This aFe POWER PROGUARD D2 oil filter is a direct OE-style replacement spin-on filter for the Ford F-150 SVT Raptor, supplied here as a 4-pack. aFe builds it with high-performance synthetic media inside a high-strength steel canister and tests it to ISO 4548-12.
Free flow with solid filtration. The synthetic media is chosen to hold back contaminants while keeping restriction low, which is what you want from the filter on a hard-working V8.
Easy to remove. The canister has a 3/8 in ratchet drive boss, so you can break it loose with an ordinary 3/8 in ratchet at the next oil change.
Sold in fours. aFe offers this filter in increments of four. This listing is the 4-pack, so you have spares for the next changes.
Features
- High flow rates and outstanding filtration
- Easy-off 3/8 in ratchet drive boss
- Tested to ISO 4548-12 standards
- High-strength steel canister
- Direct stock replacement
Emissions: aFe states that this product does not require a CARB EO number.
Fitment: aFe lists the F-150 with the 5.4L V8 (1997-2010) and the 6.2L V8 (2010-2014), with no trim list and no Raptor exclusion. The SVT Raptor ran the 5.4L V8 in 2010 and the 6.2L V8 from 2010 to 2014, so this filter fits the 2010-2014 SVT Raptor. Fitment confirmed against aFe's published application list; the rows below are the F-150 entries from that list (aFe's page also lists other Ford and Lincoln models).
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 1993-1996 | Ford | F-150 | All trims, V8-5.8L |
| 1997-2010 | Ford | F-150 | All trims, V8-4.6L |
| 1997-2010 | Ford | F-150 | All trims, V8-5.4L |
| 2010-2014 | Ford | F-150 | All trims, V8-6.2L |
| 2004 | Ford | F-150 Heritage | All trims, V8-4.6L or V8-5.4L |
This aFe POWER PROGUARD HD oil filter is a direct OE-style replacement cartridge for the 3.0L twin-turbo EcoBoost V6 in the Ford Bronco Raptor and Ranger Raptor. It uses high-performance synthetic media, is tested to ISO 4548-12, and includes the O-rings you need for a clean installation.
Built for long intervals. aFe designs the PROGUARD HD to suit extended-interval oil changes, with media that keeps flow high while it captures contaminants.
Cartridge style, O-rings included. aFe lists this filter as a direct OE replacement cartridge for the Motorcraft FL-2062 (Ford FT4Z-6731-A) and supplies the required O-rings, so the job needs no extra parts.
Features
- Designed for extended-interval oil changes
- High flow rates and outstanding filtration
- Tested to ISO 4548-12 standards
- Direct stock replacement
Emissions: aFe states that this product does not require a CARB EO number.
Fitment: aFe lists the 2022-2026 Ford Bronco Raptor and the 2024-2026 Ford Ranger Raptor, both with the V6-3.0L (tt) EcoBoost. The F-150 rows on aFe's list are the 2.7L EcoBoost only, so they do not apply to the F-150 Raptor. Fitment confirmed against aFe's published application list; the rows below are the Ford truck entries from that list (aFe's page also lists other Ford and Lincoln models).
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Ford | Bronco | Raptor |
| 2024-2026 | Ford | Ranger | Raptor |
| 2021-2026 | Ford | Bronco | All trims, V6-2.7L (tt) |
| 2015-2025 | Ford | F-150 | All trims, V6-2.7L (tt) |
| 2024-2026 | Ford | Ranger | All trims, V6-2.7L (tt) |
This aFe POWER PROGUARD HD oil filter is a direct OE-style replacement spin-on filter for the 3.5L twin-turbo EcoBoost V6 in the Ford F-150 Raptor. aFe builds it with high-performance synthetic media inside a high-strength steel canister and tests it to ISO 4548-12.
Free flow with solid filtration. The synthetic media is chosen to hold back contaminants while keeping restriction low, so oil keeps moving through the filter.
Easy to remove. The canister has a 3/8 in ratchet drive boss, so you can break it loose with an ordinary 3/8 in ratchet at the next oil change.
Direct replacement. It is a stock-style replacement, so it goes in where the original filter came out.
Features
- High flow rates and outstanding filtration
- Easy-off 3/8 in ratchet drive boss
- Tested to ISO 4548-12 standards
- High-strength steel canister
- Direct stock replacement
Emissions: aFe states that this product does not require a CARB EO number.
Fitment: aFe lists the 2017-2026 Ford F-150 Raptor with the V6-3.5L (tt) EcoBoost, so it covers the 2017-2020 and 2021-2026 F-150 Raptor. The 5.2L supercharged F-150 Raptor R is not on aFe's list. Fitment confirmed against aFe's published application list; the rows below are the F-150 entries from that list (aFe's page also lists many other makes and models).
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2011-2014 | Ford | F-150 | All trims, V6-3.7L |
| 2011-2026 | Ford | F-150 | All trims, V6-3.5L (tt) EcoBoost |
| 2011-2026 | Ford | F-150 | All trims, V8-5.0L |
| 2015-2017 | Ford | F-150 | All trims, V6-3.5L |
| 2018-2023 | Ford | F-150 | All trims, V6-3.3L |
The aFe POWER Pro Series deep transmission pan replaces the stock pan on Ford 6R80 six-speed automatic transmissions, including the one in the 2010-2014 Ford F-150 SVT Raptor. It holds about 7 quarts more fluid than the factory pan and adds fins to shed heat, which helps when you tow, haul or run hard off-road.
More fluid, cooler fluid. The extra capacity gives the transmission a larger fluid reserve, and the internal and external fins transfer heat from the fluid to the surrounding air for maximum cooling.
Strong cast construction. The pan is die-cast from A380 aluminum with reinforced ribs for strength, finished in black powder coat with machined fins for protection and a clean look.
Magnetic plug and sensor port. A large neodymium magnetic drain plug (1/2 in square drive) captures loose metal particles, and a threaded 1/8 in NPT port is ready for a transmission temperature sensor.
Easy installation. The pan bolts to the factory location with the hardware included, works with the stock filter and reuses the stock gasket, and needs no change to the factory dipstick.
Features
- Adds about 7 quarts of fluid capacity over stock
- Internal and external cooling fins
- Die-cast A380 aluminum, black powder coat with machined fins
- Neodymium magnetic drain plug
- 1/8 in NPT temperature sensor port
- Compatible with the stock filter, reuses the stock gasket
Emissions: aFe states this product does not require a CARB EO number.
Fitment: aFe lists the 2010-2014 Ford F-150 SVT Raptor with the V8-6.2L, and the pan fits the 2009-2010 F-150 V8-5.4L, which covers the 2010 SVT Raptor 5.4L. aFe notes this pan fits only models with the 6R80 transmission, so it does not fit the 2017-2020 F-150 Raptor (10R80). Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor (V8-6.2L; 2010 also V8-5.4L) |
| 2009-2010 | Ford | F-150 | V8-4.6L, V8-5.4L (6R80 only) |
| 2010-2014 | Ford | F-150 | V8-6.2L (6R80 only) |
| 2011-2014 | Ford | F-150 | V6-3.7L (6R80 only) |
| 2011-2019 | Ford | F-150 | V6-3.5L (tt) EcoBoost, V8-5.0L (6R80 only) |
| 2015-2019 | Ford | F-150 | V6-2.7L (tt) EcoBoost (6R80 only) |
| 2015-2017 | Ford | F-150 | V6-3.5L (6R80 only) |
| 2018-2020 | Ford | F-150 | V6-3.3L (6R80 only) |
The aFe Pro Series Rear Differential Cover protects the rear axle of your Ford F-150 Raptor and helps it run cooler. It bolts in place of the factory stamped-steel cover on the Ford 9.75 in 12-bolt rear axle, and brings a cast aluminum design with cooling fins, magnetic plugs and a sight glass. It gives the axle more oil capacity than stock, which helps the gear oil hold up over longer, harder use.
Cast aluminum with machined fins. The cover is durable cast aluminum with a black powder coat and machined fins. Built-in internal and external fins carry heat from the gear oil to the outside air for better cooling.
Magnetic plugs protect the gears. A magnetic drain plug and a deep-reach magnetic fill plug capture loose metal particles before they circulate through the differential. Two neodymium magnets are used for maximum gear protection.
No more overfilling. A large oil-level sight glass lets you check the oil quickly, and a calibration plug is set to the factory oil level so you do not overfill.
Check your axle. This cover fits trucks with the Ford 9.75 in 12-bolt rear axle only. It will not fit models equipped with a rear sway bar. Confirm your truck has the 9.75 in axle before ordering.
Features
- Durable cast aluminum, black powder coat with machined fins
- Increased oil capacity over the stock cover
- Internal and external cooling fins
- Dual neodymium magnetic plugs, including a deep-reach fill plug
- Large oil-level sight glass and calibration plug set to the factory level
- Fits Ford 9.75 in 12-bolt rear axles
Emissions
aFe states this product does not require a CARB EO number.
Fitment: aFe lists this cover for 2010-2014 Ford F-150 trucks with the 6.2L V8, which is the SVT Raptor engine, and for 2011-2023 F-150 trucks with the 3.5L EcoBoost, which includes the 2017-2020 F-150 Raptor. It is shown here for those two Raptor generations. aFe lists many other F-150 years and engines. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor 6.2L V8 |
| 2017-2020 | Ford | F-150 | Raptor 3.5L V6 EcoBoost |
| 2010-2014 | Ford | F-150 | 6.2L V8 |
| 2011-2023 | Ford | F-150 | 3.5L V6 EcoBoost |
| 2011-2023 | Ford | F-150 | 5.0L V8 |
| 2011-2014 | Ford | F-150 | 3.7L V6 |
| 2015-2023 | Ford | F-150 | 2.7L V6 EcoBoost |
| 2018-2023 | Ford | F-150 | 3.3L V6 |
| 2018-2021 | Ford | F-150 | 3.0L V6 Power Stroke Diesel |
| 1997-2010 | Ford | F-150 | 4.6L V8 |
| 1997-2008 | Ford | F-150 | 4.2L V6 and 5.4L V8 |
The aFe POWER Pro Series Rear Differential Cover replaces the factory stamped-steel cover on the Ford 9.75 in 12-bolt rear axle of your F-150 Raptor. It is a die-cast aluminum cover with cooling fins, magnetic plugs and a sight glass, and it holds more gear oil than stock so the axle runs cooler and the oil lasts longer when you tow, haul or drive hard off road.
Strong cast aluminum with machined fins. The cover is cast from high-strength A356 aluminum with reinforced ribs, finished in black powder coat with machined fins for strength and a clean look at the back of the truck.
More oil, lower temperatures. aFe says the cover adds about 3/4 quart of capacity over stock. Built-in internal and external fins carry heat from the gear oil to the outside air.
Magnetic plugs protect the gears. A neodymium magnetic drain plug and a deep-reach magnetic fill plug capture loose metal particles before they circulate through the differential.
Easy, accurate fill. A 1/8 in NPT calibration plug is set to the factory fluid level so you cannot overfill, and a large oil-level sight glass lets you check the level and the condition of the oil at a glance.
Clears the factory track bar. The high-clearance design is made to work with the factory rear track bar, and stainless-steel hardware is included for a corrosion-resistant install.
Features
- Cast A356 aluminum with reinforced ribs, black powder coat and machined fins
- Increased oil capacity, about 3/4 quart over the stock cover
- Internal and external cooling fins
- Neodymium magnetic drain plug and deep-reach magnetic fill plug
- Oil-level calibration plug and large sight glass
- High-clearance design for the factory track bar
- Stainless-steel hardware included
- Fits Ford 9.75 in 12-bolt rear axles
Emissions
aFe states this product does not require a CARB EO number.
Fitment: aFe lists this cover for the 2010-2014 F-150 SVT Raptor (6.2L V8), the 2017-2023 F-150 Raptor (3.5L EcoBoost) and the 2023 F-150 Raptor R (5.2L supercharged V8), along with many other F-150 years and engines. It is made for the Ford 9.75 in 12-bolt rear axle. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 SVT Raptor | V8-6.2L |
| 2017-2023 | Ford | F-150 Raptor | V6-3.5L (tt) EcoBoost |
| 2023 | Ford | F-150 Raptor R | V8-5.2L (sc) |
| 2010-2014 | Ford | F-150 | V8-6.2L |
| 2011-2023 | Ford | F-150 | V6-3.5L (tt) EcoBoost |
| 2011-2023 | Ford | F-150 | V8-5.0L |
| 2015-2023 | Ford | F-150 | V6-2.7L (tt) EcoBoost |
| 2011-2014 | Ford | F-150 | V6-3.7L |
| 2018-2023 | Ford | F-150 | V6-3.3L |
| 2018-2021 | Ford | F-150 | V6-3.0L (td) Power-Stroke Diesel |
| 2021-2023 | Ford | F-150 | V6-3.5L (tt) PowerBoost Hybrid |
| 1997-2010 | Ford | F-150 | V8-4.6L |
| 1997-2008 | Ford | F-150 | V6-4.2L and V8-5.4L |
The aFe POWER Pro Series transmission pan replaces the factory pan on Ford 10R60 and 10R80 automatic transmissions, including the 10R80 in the 2017-2025 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6. It holds about 2.3 quarts more fluid than stock and adds fins to move heat out of the fluid, which helps on long tows and hard off-road days.
Extra capacity for cooling. The larger pan gives the transmission more fluid to work with, so temperatures stay steadier under load.
Finned for heat transfer. Built-in internal and external fins carry heat from the fluid to the outside air.
Strong die-cast construction. The pan is die-cast aluminum with reinforced ribs inside and out for strength, finished in black powder coat with machined fins.
Magnetic drain plug and simple install. A neodymium magnetic drain plug captures loose particles for added protection, and the pan comes with the hardware needed for installation.
Features
- Fits Ford trucks and SUVs with the 10R60 or 10R80 transmission
- About 2.3 quarts more capacity than stock
- Internal and external cooling fins
- Die-cast aluminum, black powder coat with machined fins
- Neodymium magnetic drain plug
- Hardware included
Emissions: aFe states this product does not require a CARB EO number.
Fitment: aFe lists the 2017-2025 Ford F-150 with the V6-3.5L (tt) EcoBoost, a broad engine listing with no trim list and no Raptor exclusion. The 2017-2025 F-150 Raptor uses that engine with the 10R80 transmission, so it is covered. The 5.2L supercharged Raptor R is not listed by aFe. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2025 | Ford | F-150 | Raptor (V6-3.5L tt EcoBoost) |
| 2017-2025 | Ford | F-150 | V6-3.5L (tt) EcoBoost, V8-5.0L |
| 2014-2025 | Ford | F-150 | V6-2.7L (tt) EcoBoost |
| 2018-2021 | Ford | F-150 | V6-3.0L (td) Power-Stroke diesel |
| 2018-2023 | Ford | F-150 | V6-3.3L |
| 2021-2025 | Ford | Bronco | L4-2.3L (t) EcoBoost, V6-2.7L (tt) EcoBoost |
| 2019-2025 | Ford | Ranger | L4-2.3L (t) EcoBoost |
The aFe POWER Quantum cold air intake replaces the factory airbox and intake tube on the 2017-2026 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6. It pairs a roto-molded housing with an oil-free Pro DRY S filter and an included scoop that pulls cool air from the top of the grille. aFe measured 575 CFM at 7 in of water, 28% more than stock, with dyno gains of up to +10 HP and +15 lb-ft of torque.
Filter and housing built as one. Four captive screws attach the filter to the housing for a positive seal and a quick install. The roto-molded housing has a five-rib, industrial-grade look and is made to last.
Oil-free Pro DRY S filter. The 360-degree radial-flow filter uses three layers of progressively finer synthetic media, so there is no oiling after cleaning. It has an injection-molded base and top and a built-in three-angle velocity stack for smooth airflow.
Dyno-tuned tube. The computer-designed tube is made of high-impact XLPE for heat-soak resistance and durability, and silicone bellows couplings absorb engine movement.
Cool-air scoop. The included scoop captures the coolest, freshest air from the top of the front grille for more air velocity and quicker throttle response.
Direct fit. It uses factory mounting points and needs no cutting or modification. Clamps, couplings and hardware are included.
Features
- Up to +10 HP and +15 lb-ft on aFe's dyno
- Flows 575 CFM at 7 in H2O, 28% more than the factory intake
- Oil-free Pro DRY S filter with three layers of synthetic media
- Integrated filter-to-housing design with four captive screws
- Included air scoop draws cool air from the top of the grille
- Silicone bellows couplings, clamps and hardware included
- Direct fit on factory mounting points, no cutting
Emissions
aFe states this product is not currently CARB exempt. It is not available for purchase in California or for use on any vehicle registered with the California DMV.
Fitment: aFe lists the 2017-2026 Ford F-150 Raptor with the V6-3.5L (tt) EcoBoost. The 5.2L supercharged Raptor R is not listed. aFe also lists 2015-2026 F-150 trucks with the 2.7L or 3.5L EcoBoost, plus the 2018-2026 Expedition and Lincoln Navigator with the 3.5L. It will not fit an F-150 with the 3.5L PowerBoost hybrid. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2015-2026 | Ford | F-150 | V6-3.5L (tt) EcoBoost |
| 2015-2026 | Ford | F-150 | V6-2.7L (tt) EcoBoost |
| 2018-2026 | Ford | Expedition | V6-3.5L (tt) EcoBoost |
| 2018-2026 | Lincoln | Navigator | V6-3.5L (tt) EcoBoost |
The aFe Quantum Dynamic Air Scoop (D.A.S.) in blue feeds cooler, denser air to the air intake of your 2017-2020 Ford F-150 Raptor. It collects air from the top of the front grille, where it is coolest and freshest, and guides it into the intake to increase air velocity. Cooler intake air lets the engine run more efficiently, which supports performance and throttle response.
Cooler air from the grille. The scoop guides ambient air from outside the engine bay directly into the intake system instead of letting the intake draw warm underhood air.
Durable LLDPE construction. It is molded from linear low-density polyethylene, which is impact resistant, extremely durable and 100 percent recyclable. The blue color adds a bright accent under the hood.
Easy to install. The scoop snaps into the air box, and all necessary hardware is included, so no modifications to the truck are needed.
Check compatibility. The 53-10008SL fits the factory air intake as well as aFe Quantum and Magnum FORCE Stage-2 intake systems. It does not fit aFe Momentum intake systems.
Features
- Increases the cool, dense airflow delivered to the intake
- Impact-resistant, recyclable LLDPE polymer, blue color
- Snaps into the air box with included hardware
- Fits the factory intake and aFe Quantum and Magnum FORCE Stage-2 intakes
Emissions
aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists this scoop for the 2017-2020 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6, along with 2015-2020 F-150 trucks with several engines. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor 3.5L V6 EcoBoost |
| 2015-2020 | Ford | F-150 | 3.5L V6 EcoBoost |
| 2015-2020 | Ford | F-150 | 2.7L V6 EcoBoost |
| 2015-2020 | Ford | F-150 | 5.0L V8 |
| 2015-2017 | Ford | F-150 | 3.5L V6 |
| 2018-2020 | Ford | F-150 | 3.3L V6 |
| 2018-2020 | Ford | F-150 | 3.0L V6 Power Stroke Diesel |
The aFe Quantum Dynamic Air Scoop (D.A.S.), part 53-10008S, is a molded black duct that carries cool outside air from the top of the front grille into the air intake of your 2017-2020 Ford F-150 Raptor with the 3.5L EcoBoost twin-turbo V6. Cooler air is denser, and aFe designs the scoop to turn that denser charge into better throttle response and efficiency.
Pulls air from the coolest spot. The scoop captures the freshest air at the top of the grille and speeds it toward the intake, instead of letting the intake draw warm air from inside the engine bay.
Built to take abuse. It is molded from linear low-density polyethylene (LLDPE), an impact-resistant, durable material that is also 100% recyclable.
Simple installation. The scoop snaps into the air box and all necessary hardware is included, with no modification to the truck. aFe says it fits the factory intake systems and aFe Quantum and Magnum FORCE Stage-2 intakes. It does not fit aFe Momentum intake systems.
Features
- Increases cool, dense airflow to the intake for stronger throttle response
- Quickly snaps into the air box; all hardware included
- Fits the factory intake and aFe Quantum and Magnum FORCE Stage-2 intakes
- Durable, impact-resistant LLDPE polymer construction
Emissions
aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California DMV.
Fitment
Fitment: aFe lists the 2017-2020 Ford F-150 Raptor with the V6-3.5L (tt) EcoBoost engine. The same scoop also fits the other 2015-2020 F-150 engines listed below. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
| 2015-2020 | Ford | F-150 | V6-2.7L (tt) EcoBoost |
| 2015-2020 | Ford | F-150 | V6-3.5L (tt) EcoBoost |
| 2015-2020 | Ford | F-150 | V8-5.0L |
| 2015-2017 | Ford | F-150 | V6-3.5L |
| 2018-2020 | Ford | F-150 | V6-3.3L |
| 2018-2020 | Ford | F-150 | V6-3.0L (td) Power-Stroke |
The aFe Quantum Dynamic Air Scoop (D.A.S.) in red feeds cooler, denser air to the air intake of your 2017-2020 Ford F-150 Raptor. It collects air from the top of the front grille, where it is coolest and freshest, and guides it into the intake to increase air velocity. Cooler intake air lets the engine run more efficiently, which supports performance and throttle response.
Cooler air from the grille. The scoop guides ambient air from outside the engine bay directly into the intake system instead of letting the intake draw warm underhood air.
Durable LLDPE construction. It is molded from linear low-density polyethylene, which is impact resistant, extremely durable and 100 percent recyclable. The red color adds a bright accent under the hood.
Easy to install. The scoop snaps into the air box, and all necessary hardware is included, so no modifications to the truck are needed.
Check compatibility. The 53-10008SR fits the factory air intake as well as aFe Quantum and Magnum FORCE Stage-2 intake systems. It does not fit aFe Momentum intake systems.
Features
- Increases the cool, dense airflow delivered to the intake
- Impact-resistant, recyclable LLDPE polymer, red color
- Snaps into the air box with included hardware
- Fits the factory intake and aFe Quantum and Magnum FORCE Stage-2 intakes
Emissions
aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists this scoop for the 2017-2020 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6, along with 2015-2020 F-150 trucks with several engines. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor 3.5L V6 EcoBoost |
| 2015-2020 | Ford | F-150 | 3.5L V6 EcoBoost |
| 2015-2020 | Ford | F-150 | 2.7L V6 EcoBoost |
| 2015-2020 | Ford | F-150 | 5.0L V8 |
| 2015-2017 | Ford | F-150 | 3.5L V6 |
| 2018-2020 | Ford | F-150 | 3.3L V6 |
| 2018-2020 | Ford | F-150 | 3.0L V6 Power Stroke Diesel |
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.