Welcome to RaptorsOnly.com
-
Brands
Shop by brand
- 3D MAXpider
- Access
- Addictive Desert Designs
- Advan
- AEM Induction
- aFe
- Air Lift
- Airaid
- Alcon
- AlphaRex
- AMP Research
- AMS
- Anderson Composites
- ANZO
- ARB
- Atturo Tire
- AutoMeter
- AVS
- AWE Tuning
- BackRack
- Baer Brakes
- Baja Designs
- BAK
- Banks Power
- BBK
- BBS
- BD Diesel
- Belltech
- Bestop
- BFGoodrich
- BMC
- Body Armor 4x4
- Borla
- Brembo
- Brembo OE
- Bully Dog
- Bushwacker
- Camburg
- Clevite
- COBB
- Cometic Gasket
- COMP Cams
- CORSA Performance
- Covercraft
- CSF
- DBA
- DeatschWerks
- DFC
- Diode Dynamics
- DS18
- DV8 Offroad
- Eaton
- EBC
- Eibach
- Enkei
- Extang
- Fabtech
- Fel-Pro
- fifteen52
- Firestone
- Flowmaster
- Ford Racing
- Forgestar
- FORM Lighting
- FOX
- Garrett
- Gates
- GEN-Y Hitch
- Go Fast Bits
- Go Rhino
- Gram Lights
- Granatelli Motor Sports
- GSC Power Division
- Hawk Performance
- Hella
- Hellwig
- Hotchkis
- Husky Liners
- ICON
- Injen
- J&L
- JBA
- JLT
- K&N Engineering
- KC HiLiTES
- King Engine Bearings
- King Shocks
- Kleinn Air Horns
- Kooks Headers
- KYB
- LIQUI MOLY
- LUND
- Magnaflow
- Mahle OE
- Maxtrac
- Mayhem
- MBRP
- McGard
- Method Wheels
- MGP
- Michelin
- Mickey Thompson
- Mishimoto
- Moog
- Motul
- MTX Wheels
- N-Fab
- Nacho Offroad Technology
- NGK
- Nitrous Express
- Odyssey Battery
- ORACLE Lighting
- PowerStop
- Putco
- QA1
- Raceline
- Radium Engineering
- Rally Armor
- Rampage
- Raxiom
- Retrax
- Rhino-Rack
- Ridetech
- Rigid Industries
- Rival 4x4
- RockJock
- Roll-N-Lock
- Roush
- Royal Purple
- SCT Performance
- Skyjacker
- Snow Performance
- SPC Performance
- SPOD
- Stainless Works
- Superlift
- Superpro
- Timbren
- Torque Solution
- TOYO
- Truxedo
- Tuff Country
- Turbosmart
- UMI Performance
- Undercover
- Volant
- Vossen
- Wagner Tuning
- WeatherTech
- Weld
- Westin
- Whiteline
- Wilwood
- Yokohama Tire
- Yukon Gear & Axle
- Zone Offroad
No brands found. Try another name or initial.
156 brands
View all brands -
F-150 Raptor
- F-150 Raptor
-
1st Gen (2010-2014)
-
2nd Gen (2017-2020)
-
3rd Gen (2021-Present)
-
Raptor R (2023-Present)
-
Bronco Raptor
- Bronco Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
-
Ranger Raptor
- Ranger Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
Your cart
Subheading
Product comparison
Describe you product comparison grid
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
2489 products
2489 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$1,499.99
This is the ADD High Mount Intercooler Upgrade Kit, Clocked blow-off valve (BOV) version, for the 2017-2025 Ford F-150 Raptor. It is designed to work with Addictive Desert Designs bumpers for the Ford Raptor and F-150, with a mount layout tuned for frame-cut and winch-mount bumpers.
More airflow. ADD states the improved intercooler flows 8.5% more than the leading competitors in the market. The main assembly is an 18-core design and the whole intercooler is 100% TIG welded.
Built for off-road use. The intercooler sits on a welded steel mounting beam that ADD describes as strong enough for off-road use.
Keeps factory functions. The kit retains all OEM sensors and functions. It includes bracketry to relocate the adaptive cruise control module on the 2015-2017 and 2018-2020 F-150 and the 2017-2020 F-150 Raptor. For the 2021-2023 F-150 (AC19152501NA), 2021-2023 F-150 Raptor (AC2101501NA) and 2024 F-150 Raptor (AC1305101NA), ADD requires its separate adaptive cruise control bracket.
Emissions. CARB compliant under Executive Order D-812.
Not for the Raptor R. ADD states this kit is not compatible with the F-150 Raptor R.
Features
- Clocked BOV version
- 8.5% more flow than the nearest competitor, per ADD
- 18-core intercooler, 100% TIG welded
- Steel mounting beam ready for off-road use
- Mount design optimized for frame-cut and winch-mount bumpers
- Retains all OEM sensors and functions
- CARB compliant, EO D-812
Fitment: 2015-2023 Ford F-150 and 2017-2025 Ford F-150 Raptor (excluding Raptor R). Not compatible with the Raptor R. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
2015-2020 Clocked BOV Install Guide2021-2024 Clocked BOV Install Guide
Installation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2025 | Ford | F-150 | Raptor (excluding Raptor R) |
| 2015-2023 | Ford | F-150 | All trims |
$1,499.99
This is the ADD High Mount Intercooler Upgrade Kit, Normal blow-off valve (BOV) version, for the 2017-2025 Ford F-150 Raptor. It is designed to work with Addictive Desert Designs bumpers for the Ford Raptor and F-150, with a mount layout tuned for frame-cut and winch-mount bumpers.
More airflow. ADD states the improved intercooler flows 8.5% more than the leading competitors in the market. The main assembly is an 18-core design and the whole intercooler is 100% TIG welded.
Built for off-road use. The intercooler sits on a welded steel mounting beam that ADD describes as strong enough for off-road use.
Keeps factory functions. The kit retains all OEM sensors and functions. It includes bracketry to relocate the adaptive cruise control module on the 2015-2017 and 2018-2020 F-150 and the 2017-2020 F-150 Raptor. For the 2021-2023 F-150 (AC19152501NA), 2021-2023 F-150 Raptor (AC2101501NA) and 2024 F-150 Raptor (AC1305101NA), ADD requires its separate adaptive cruise control bracket.
Emissions. CARB compliant under Executive Order D-812.
Not for the Raptor R. ADD states this kit is not compatible with the F-150 Raptor R.
Features
- Normal BOV version
- 8.5% more flow than the nearest competitor, per ADD
- 18-core intercooler, 100% TIG welded
- Steel mounting beam ready for off-road use
- Mount design optimized for frame-cut and winch-mount bumpers
- Retains all OEM sensors and functions
- CARB compliant, EO D-812
Fitment: 2015-2023 Ford F-150 and 2017-2025 Ford F-150 Raptor (excluding Raptor R). Not compatible with the Raptor R. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
2015-2020 Normal BOV Install Guide2021-2024 Normal BOV Install Guide
Installation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2025 | Ford | F-150 | Raptor (excluding Raptor R) |
| 2015-2023 | Ford | F-150 | All trims |
$2,609.08
The Addictive Desert Designs HoneyBadger is a plate-steel front bumper for the 2021 and newer Ford F-150 Raptor and the Raptor R. This version includes the top hoop; ADD also sells the same bumper without it.
Built to follow the truck. The bumper tucks in tight to the front of the Raptor and follows its body lines, with sharp angles and a more aggressive stance. The steel is finished in hammer black powder coat and the aluminum accent panels in satin black.
Lighting where you need it. The top hoop carries a 30 in. radius LED light bar and partly shields it. A 20 in. light bar fits in a protected spot behind the HoneyBadger claw cutaways, and 10 in. light bars fit behind each side panel.
Sensor and non-sensor trucks. If your 2021+ Raptor has the 801A High package, the front parking sensors install in the bumper. Trucks with the 800A Standard package get the supplied sensor plugs for the mount holes. A shutter motor bracket is included.
Plan the extras. ADD lists this bumper as compatible with its Raptor Intercooler Kit (sold separately; it needs the shutter motor relocation kit) and the Raptor R High Mount Heat Exchanger Kit (sold separately). On 2024+ trucks the intercooler kit needs an additional shutter motor relocation kit. ADD also notes the bumper may block the factory front camera view, and recommends its Adaptive Cruise Control relocation bracket to keep ACC working.
Features
- Modern plate steel design that fits tight to the front of the truck
- 20 in. straight LED mount in the center
- 30 in. radius LED mount on top of the bumper
- 10 in. light bar mounts behind each side panel
- Fits sensor and non-sensor trucks
- Hammer black steel with satin black aluminum panels
- Fully bolt-on, made in America
Fitment: 2021-2026 Ford F-150 Raptor and 2023 and newer Ford F-150 Raptor R. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Bumper Install GuideACC Bracket Install Guide
Installation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$2,429.08
The HoneyBadger from Addictive Desert Designs is a sharp-angled, rugged front bumper for the 2021+ Ford F-150 Raptor and the 2023 Raptor R. This listing is the version with the top hoop, which carries a curved light bar above the bumper.
Lighting in protected positions. The top hoop holds a 30-inch radius LED light bar that follows the curve of the truck's front end. A 20-inch light bar can sit behind the HoneyBadger claw cutaways in the center, and 10-inch light bars mount behind each side panel for extra trail lighting.
Shaped to the truck. The bumper is designed to follow the Raptor's body lines closely while giving the front end a more aggressive stance. The steel has a hammer black powder coat and the aluminum panels a satin black powder coat, which protects against rust.
Sensor and non-sensor trucks. If your Raptor has the 801A High package, the front parking sensors install into the bumper. For trucks with the 800A Standard package, ADD ships sensor plugs to fill the mount holes. The OEM tow hooks fit underneath the bumper, and it is fully bolt-on and made in America.
Works with ADD upgrades. A shutter motor bracket is included. ADD lists compatibility with its Raptor Intercooler Kit (IC1650KIT) and Raptor R High Mount Heat Exchanger Kit (AC21112301NA), both sold separately; a 2024+ truck with the intercooler upgrade needs an additional shutter motor relocation kit. Trucks with adaptive cruise control can add ADD's separate ACC relocation bracket.
Features
- Modern plate steel design that fits tight to the front of the truck
- 30-inch radius LED light bar mount on top of the bumper
- 20-inch straight LED light bar mount in the center
- 10-inch light bar mounts behind each side panel
- Fits trucks with or without front parking sensors
- Retains OEM tow hooks
- Hammer black powder coat, satin black aluminum panels
- Shutter motor bracket included
- Made in America
Fitment: 2021-2026 Ford F-150 Raptor and 2023-2026 Ford F-150 Raptor R. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Bumper Install GuideInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$2,249.08
The HoneyBadger Rear Bumper from Addictive Desert Designs is a plate steel, box-design replacement for the factory rear bumper on the third-generation Ford F-150 Raptor and Raptor R. ADD shaped it to follow the Raptor's dovetail rear body lines closely.
Plate steel box design. The modern box construction offers more protection than the factory piece, while the stock dual exhaust and tow hooks still sit comfortably below the bumper.
Sensors stay working. Sensor cutouts keep the parking and backup warning system fully functional, and the OEM license plate lights and tow wiring plug or harness are retained.
Recovery and lighting. Two reinforced 1 in. clevis mounts accept soft shackles for recovery. Near each end, 10 in. LED light bar mounts sit behind satin black aluminum panels with badger claw cutouts, and two cube light mounts sit on each side of the center.
Trailer wiring. A factory or aftermarket trailer wiring harness can be mounted to the underside of the bumper near the hitch. The bumper installs fully bolt-on and is made in America.
Features
- Plate steel box design
- Compatible with factory backup sensors
- 10 in. LED light bar mounts behind side accent panels
- Cube light mounts for additional lighting
- Reinforced 1 in. clevis mounts accept soft shackles
- Retains OEM license plate lights, tow hooks and tow wiring plug or harness
- Hammer black powder coat with satin black panels
- Made in America
Prop 65. WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Fitment: Ford F-150 Raptor 2021-2026 and F-150 Raptor R 2023-2026. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Installation Instructions (ADD)Installation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$2,879.08
The HoneyBadger front bumper reshapes the nose of a 2010-2014 Ford F-150 Raptor with an aggressive, body-hugging design from Addictive Desert Designs. It adds lighting, recovery points and a winch mount in one bolt-on bumper.
Lighting built in. A 40 in. radius (curved) LED light bar mounts up top, a straight 20 in. bar sits in the center, and each side panel has a mount for a 10 in. light bar behind it.
Recovery ready. Reinforced clevis mounts accept soft shackles, and the bumper is made with a winch mount so you can add a winch.
Made to fit the truck. The bumper is shaped to follow the front of the Raptor, with satin black side panel inserts against a hammer black bumper finish, in 3/16 in. mild steel and made in America.
Features
- Winch mount
- Bumper color: hammer black; panel color: satin black
- Reinforced clevis mounts for soft shackles
- Top mount: 40 in. RDS light bar
- Lower mount: 20 in. light bar
- Side mount: 10 in. light bar
- 3/16 in. mild steel construction
- Made in the USA
Prop 65 warning. This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Fitment: Ford F-150 Raptor, 2010-2014. Fitment confirmed against Addictive Desert Designs' own product listing for the 2010-2014 Ford Raptor.
Guides & Manuals
Install InstructionsInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | Raptor |
$2,069.08
The Addictive Desert Designs Phantom is a low-profile, fully bolt-on front bumper for the 2017-2020 (2nd generation) Ford F-150 Raptor. Its styling draws on prerunner bumpers, with a knife's edge shape that ADD says echoes trailing arms.
Plate steel with a vented skid plate. The bumper is built from plate steel and carries a lightweight 3/16 in. aluminum skid plate. Vented cutouts in the plate let air reach the factory intercooler, which stays in place; no intercooler relocation is needed.
Lighting options. A central mount takes a 20 in. radius LED light bar, and 10 in. SR LED light bars mount behind each side panel.
Sensors and cruise control. Sensor mounts keep the factory parking sensors working. Installation requires an Adaptive Cruise Control relocation bracket, which ADD offers as an option.
Features
- Knife's edge, low-profile design
- Plate steel construction
- Full-size aluminum skid plate with air vents
- Fits a 20 in. radius LED light bar
- Fits two 10 in. SR LED light bars
- Retains the OEM intercooler and parking sensors
- Retains Adaptive Cruise Control function with the optional ACC relocation bracket
- Hammer black powder coat steel
- Satin black powder coat aluminum accent panels
- Made in the USA
Prop 65. WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Fitment: 2017-2020 Ford F-150 Raptor. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Installation InstructionsInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
$2,429.08
The Addictive Desert Designs Phantom is a low-profile front bumper for the third-generation Ford F-150 Raptor and the Raptor R, with a prerunner-inspired layout.
Plate steel, knife's edge look. Instead of traditional tube steel, the Phantom is built from plate steel with contours that mimic the look of trailing arms. The steel is finished in hammer black powder coat and the aluminum accent panels in satin black.
Full-coverage skid plate. A lightweight 3/16 in. aluminum skid plate protects the underside without adding excess weight, and its vented cutouts let air reach the intercooler. ADD notes the intercooler does not need to be moved for proper fitment.
Lighting options. A central 20 in. radius LED light bar mount sits in the bumper, and 10 in. SR light bars fit behind each side panel. The bumper has sensor mounts that keep the factory parking sensors working.
Before you install. ADD states an Adaptive Cruise Control relocation bracket is required for installation, and it also keeps ACC working. A shutter motor bracket ships with the bumper. The bumper is listed as compatible with ADD's Raptor Intercooler Kit (sold separately; it needs the shutter motor relocation kit, and 2024-2025 models need an additional one) and the Raptor R High Mount Heat Exchanger Kit (sold separately).
Features
- Knife's edge design with a low-profile fit
- Fits a 20 in. radius LED light bar and two 10 in. SR LED light bars
- Plate steel construction
- Full-size aluminum skid plate with air vents
- Retains the OEM intercooler and parking sensors
- Hammer black steel with satin black aluminum accent panels
- Fully bolt-on, made in the USA
Fitment: 2021-2026 Ford F-150 Raptor and 2023 and newer Ford F-150 Raptor R. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Bumper Install GuideACC Bracket Install Guide
Installation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$2,159.08
The Addictive Desert Designs Phantom is a full-size front bumper made for the 2024+ Ford Ranger Raptor. Its knife-edge shape follows the factory lines of the truck and keeps a low profile, and it is built from steel with an aluminum skid plate included in the box.
Lighting options. The integrated center mount takes either one 20-inch radius LED light bar or six cube lights. The side wings each have a mount for a 10-inch SR LED light bar, so up to two can be fitted.
Underbody protection. The included 3/16-inch aluminum skid plate has air vents that let the intercooler and radiator breathe. Because it is aluminum, ADD notes it will not rust.
Keeps factory equipment. The bumper retains the OEM parking sensors, recovery points and intercooler. To keep adaptive cruise control working, ADD requires its separate 2024+ Ranger Raptor Adaptive Cruise Control Relocation Kit.
Finish and build. A 2-stage hammer black powder coat covers the steel, with satin black powder coated aluminum accent panels. It is designed and manufactured in the USA.
Features
- Phantom full-size front bumper for the 2024+ Ranger Raptor
- Knife-edge, low-profile design
- Center mount for one 20-inch radius LED light bar or six cube lights
- Side wing mounts for two 10-inch SR LED light bars
- Included 3/16-inch aluminum skid plate with air vents
- Retains OEM intercooler, parking sensors and recovery points
- Steel construction with 2-stage hammer black powder coat
- Satin black powder coated aluminum accent panels
- Made in the USA
Prop 65. WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Fitment: 2024+ Ford Ranger Raptor. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Bumper Install GuideInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024+ | Ford | Ranger | Raptor |
$528.66
This is the skid plate from Addictive Desert Designs' Phantom front bumper for the 2024+ Ford Ranger Raptor, sold on its own as a kit. It is for Ranger Raptor owners who already have the bumper hardware or want the plate by itself, and ADD builds it in the USA.
Lightweight aluminum protection. The plate is 3/16-inch aluminum, so it guards the front undercarriage of your Raptor from rocks and obstacles without adding much weight to the nose of the truck.
Vented for cooling. Air vents in the plate keep air moving to the intercooler and radiator, so the protection does not come at the cost of cooling.
Will not rust. Aluminum construction means the plate stays rust-free no matter how wet or muddy the trail gets.
Designed to match the Phantom bumper. It is the same plate ADD includes with the Phantom front bumper, whose knife-edge, low-profile design follows the factory lines of the Ranger Raptor. The photos show the plate as installed on that bumper.
Features
- 3/16 in. lightweight aluminum skid plate
- Air vents for intercooler and radiator airflow
- Rust-free aluminum construction
- Same plate included with the ADD Phantom front bumper
- Made in the USA
Fitment: 2024+ Ford Ranger Raptor. ADD does not list this kit on its own, so fitment is confirmed against Addictive Desert Designs' published application list for the Phantom front bumper it comes from.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024+ | Ford | Ranger | Raptor |
$1,619.08
The Phantom Rear Bumper from Addictive Desert Designs is a plate steel upgrade for the third-generation Ford F-150 Raptor and Raptor R, built in a modern box structure that protects more than the factory bumper.
Hammerhead styling. Sleek wings flare out in a bold hammerhead shape that pairs with the Raptor's rear bodywork.
Factory features retained. Sensor cutouts keep the parking and backup warning system working. The factory dual exhaust and tow hooks fit comfortably below the bumper, and the OEM license plate lights and tow wiring plug or harness are retained.
Lighting built in. Mounting points for two 10 in. single-row LED light bars sit behind satin black aluminum accent panels.
Complete and bolt-on. The bumper comes with all hardware, installs 100% bolt-on and is made in the USA.
Features
- Plate steel box design
- 10 in. single row light bar mounts behind side accent panels
- Parking sensor cutouts, compatible with factory backup sensors
- Retains OEM license plate lights, tow hooks and tow wiring plug or harness
- Hammer black powder coat finish
- All hardware included
- Made in America
Prop 65. WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Fitment: Ford F-150 Raptor 2021-2026 and F-150 Raptor R 2023-2026. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Installation Instructions (ADD)Installation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$1,529.08
The Phantom Rear Bumper from Addictive Desert Designs is a trim, knife's-edge replacement bumper made for the 2024+ Ford Ranger Raptor. It improves ground clearance at the back of the truck, gives it a more aggressive stance, and keeps the factory rear hardware in place.
Slim, low-profile design. The knife's-edge shape and satin black accent panels follow the factory lines of the Raptor for a clean, close-fitting look.
Built for rough use. The bumper is made from steel with a durable two-stage hammer black powder coat, and the accent panels are powder coated aluminum in satin black.
Room for extra light. Toward each side of the bumper you can mount a pair of 3 in. cube lights for supplemental lighting behind the truck.
Keeps the factory features. The OEM recovery points, trailer plug and wiring, parking sensors, and license plate lights all stay in service.
Features
- Knife's-edge, low-profile design
- Mounts for (2) 3 in. cube lights
- Retains OEM recovery points and trailer plug and wiring
- Retains OEM parking sensors and license plate lights
- 2-stage hammer black powder coat finish
- Satin black powder coated aluminum accent panels
- Fully bolt-on
- Made in the USA
California Proposition 65. WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Fitment: 2024+ Ford Ranger Raptor. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Install InstructionsInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024+ | Ford | Ranger | Raptor |
$2,699.08
The Addictive Desert Designs Pro Bolt-On is the slimmest-fitting front bumper in ADD's lineup for the 2021-2026 Ford F-150 Raptor and the Raptor R, designed in a prerunner style.
Tube steel that hugs the truck. The main radius is .120 in. wall steel tube that follows the contours of the front end and sits flush with the grille and valance.
Keeps the intercooler where it is. A CNC-cut 1/8 in. aluminum skid plate is vented so air reaches the OEM intercooler, which stays in its original position. A shutter motor bracket is included with the bumper.
Flexible lighting. The universal light mount in the center takes up to six cube lights or a 20 in. radius LED light bar, protected by the lower tube, the skid plate and side steel plating. The optional ADD PRO Bolt-On Light Hoop, sold separately, adds mounting for up to four 6 in. round lights in the same low-profile style.
Winch-ready option. ADD also offers a winch conversion kit that lets this bumper accept a winch; it bolts to the truck's frame and sits behind the winch plate. It is selected as an option on ADD's page and is not part of this listing.
Plan the extras. ADD lists the bumper as compatible with its Raptor Intercooler Kit (sold separately; it needs the shutter motor relocation kit, and 2024-2025 models need an additional one) and the Raptor R High Mount Heat Exchanger Kit (sold separately).
Features
- Follows the contours of the front end with a low profile
- Retains the OEM intercooler location
- Light mounts for up to six cube lights or a 20 in. radius LED bar
- .120 in. wall steel tubing
- CNC-cut aluminum skid plate
- Hammer black steel with satin black panels
- Fully bolt-on, made in America
Fitment: 2021-2026 Ford F-150 Raptor and 2023 and newer Ford F-150 Raptor R. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Bumper, Winch Kit, and Light Hoop Install GuideACC Bracket Install Guide
Installation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$719.08
This add-on light hoop from Addictive Desert Designs bolts onto the ADD PRO Bolt-On front bumper for the Ford F-150 Raptor and gives you room for four more 6-inch round lights. It is made in the USA, and the whole install takes only a handful of minutes.
Four more round lights. The hoop accommodates four 6-inch round LED lights, on top of what the bumper's own center mount carries, for extra reach on dark trails.
Same tubing as the bumper. It is built from the same .120-inch wall steel tubing as the PRO Bolt-On bumper it mounts to, so the styling stays consistent and low-profile.
Stays close to the bumper. The hoop protrudes only 4 inches further than the main tube of the bumper, so it does not push the front of the truck out any more than it has to.
Fully bolt-on. No cutting or welding is needed, and it mounts to the ADD PRO Bolt-On front bumper (F218102070103), which is required.
Features
- Works with the ADD PRO Bolt-On front bumper
- Accommodates four 6 in. round lights
- Protrudes only 4 in. further than the bumper's main tube
- .120 in. wall steel tubing
- Fully bolt-on
- Made in the USA
Fitment: 2021-2026 Ford F-150 Raptor and 2023+ Ford F-150 Raptor R (2023-2026), the vehicles ADD lists for the PRO Bolt-On front bumper this hoop adds to. The hoop's own page text still reads 2021-2023, which looks like an older note, so fitment follows the bumper's listing. Fitment confirmed against Addictive Desert Designs' published application list for the PRO Bolt-On front bumper.
Guides & Manuals
Bumper, Winch Kit, and Light Hoop Install GuideThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$3,419.08
The Race Series R chase rack gives a Ford F-150 Raptor extra places to mount lights for off-road night driving, and it does it with a distinctive look that sets the truck apart. It is a direct bolt-on rack with satin black honeycomb-style panels.
Tuck-away light bar. A light actuator kit raises and lowers a front-facing Rigid Industries 50 in. LED bar, so you can stow it out of sight when you are not using it.
Lighting for the rear too. Light mount tabs accept rear-facing Dually cube lights, adding illumination for whatever is behind the truck.
Solid construction. The rack is built from .120 wall steel tubing with 1/8 in. aluminum panels, finished in hammer black powder coat with satin black panels.
Features
- Light actuator to raise and lower your lights
- Front-facing 50 in. LED bar mount
- Rear-facing Dually light mounts
- 100% direct bolt-on
- .120 wall steel tubing
- 1/8 in. aluminum panels
- Hammer black powder coat with satin black panels
Prop 65 warning. This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Fitment: Ford F-150 Raptor 2010-2014 and 2017-2020, plus 2012-2023 F-150 Raptor and Raptor R, along with the other F-150 applications listed below. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Install InstructionsInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | Raptor |
| 2017-2020 | Ford | F-150 | Raptor |
| 2012-2023 | Ford | F-150 | Raptor & Raptor R |
| 2004-2008 | Ford | F-150 | All trims |
| 2009-2014 | Ford | F-150 | All trims |
| 2011-2014 | Ford | F-150 | EcoBoost |
| 2015-2017 | Ford | F-150 | All trims |
| 2021-2023 | Ford | F-150 | All trims |
$377.08
The rear window molle storage panels from Addictive Desert Designs (ADD) give the Ford Bronco Raptor, and other 2021-2026 four-door Broncos, organized storage in the cargo area. The set includes a driver side and a passenger side panel.
Gear stays within reach. You can strap, bolt or clip tools, first aid kits, recovery gear, molle bags and other accessories onto the panels.
Shaped for the Bronco. The panels follow the Bronco's rear roll bars and seat belts for a clean look, and they work with or without a hardtop, so you do not have to rearrange your storage when the top comes off.
Quiet and strong. Reinforced mounting points reduce rattling while giving the strength to carry gear. The panels are 1/8 in. steel with a Hammer Black powder coat.
Easy install. They use the factory accessory mounting locations and factory hardware, so no modifications are needed. Fully bolt-on, made in the USA.
Please note: ADD states these panels will not fit with the factory soft top or on 2-door models.
Features
- Includes driver and passenger side panels
- Attach molle bags, med kits, tools and other accessories
- Suitable for use with or without a hardtop
- Constructed from 1/8 in. steel
- Hammer Black powder coat finish
- Bolt-on installation
- Made in the USA
Prop 65. WARNING: This product can expose you to chemicals including crystalline silica, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Fitment: 2022-2026 Ford Bronco Raptor, plus 2021-2026 Ford Bronco (not for the factory soft top or 2-door models). Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Installation InstructionsInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Ford | Bronco | Raptor |
| 2021-2026 | Ford | Bronco | All trims; not for factory soft top or 2-door |
$719.08
This front skid plate is built for the Ford Bronco Raptor when it wears an Addictive Desert Designs Rock Fighter or Bomber front bumper. It takes the place of the factory skid plate so the underside of the truck stays covered after the bumper swap.
Built to take a hit. The plate is cut from 3/16 in. aluminum alloy, strong enough to absorb trail impacts while shielding the underbody components behind the bumper from rocks, dirt and debris.
Finished for the weather. A satin black powder coat adds a clean look and helps guard the metal against salt, corrosion and rust.
Straightforward install. It is fully bolt-on, with no cutting or welding needed, and it is made in America.
Features
- High grade 3/16 in. aluminum alloy
- Replaces the stock OEM skid plate
- Made for Rock Fighter and Bomber front bumpers
- Fully bolt-on, no cutting or welding
- Satin black powder coat finish
- Made in the USA
Prop 65 warning. This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Fitment: Ford Bronco Raptor, 2022-2026. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Install Guide (Step 17)Installation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Ford | Bronco | Raptor |
$2,249.08
The Rock Fighter is a pre-runner style steel front bumper from Addictive Desert Designs for the Ford F-150 Raptor and Raptor R. It replaces the factory front bumper with a low-profile, plate-steel design, satin black accent panels and an included aluminum skid plate, and it is built and finished in the USA.
Protection under the nose. The included 3/16-inch aluminum skid plate is lightweight and rust-proof, and it has integrated air vents so the intercooler keeps getting airflow.
Keeps factory equipment working. The design retains the OEM parking sensors and the OEM intercooler. Adding the Adaptive Cruise Control Relocation Bracket (sold separately) lets you keep full use of the truck's ACC functions.
Built-in lighting. A center mount holds a 20-inch dual-row radius LED light bar or five cube lights, so you can add light for low-visibility terrain without extra brackets.
Finish and install. Two-stage hammer black powder coat guards the steel against scratches from brush and rocks, and the bumper is fully bolt-on.
2024+ F-150 Raptor note. On 2024+ Raptor models (not the Raptor R), the Shutter Motor Relocation Kit is needed so no dash lights appear when the lower intercooler shutter motor is disconnected for installation. ADD includes a shutter motor bracket with this bumper. It is also compatible with ADD's Raptor Intercooler Kit and Raptor R High Mount Heat Exchanger Kit (both sold separately); 2024+ models with the intercooler kit need the shutter motor relocation kit.
Features
- Low-profile fitment, steel construction
- Included 3/16 in. aluminum skid plate with air vents
- Center mount for a 20 in. dual-row radius LED light bar or five cube lights
- Satin black powder coat aluminum accent panels
- Retains OEM parking sensors and intercooler
- Optional ACC relocation bracket keeps ACC functions
- Two-stage hammer black powder coat finish
- Fully bolt-on installation
- Made in the USA
Prop 65 warning. This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Fitment: 2021-2026 Ford F-150 Raptor and 2023-2026 Ford F-150 Raptor R (Addictive Desert Designs lists the bumper for the 2021+ Raptor and 2023+ Raptor R). Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Bumper Install GuideInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$1,619.08
The Rock Fighter Rear Bumper from Addictive Desert Designs gives the third-generation Ford F-150 Raptor a low-profile steel bumper that guards the tailgate and rear body from rocks and brush on the trail.
Low-profile protection. The design follows the lines of the Raptor and puts a solid steel barrier between obstacles and the back of the truck without adding a lot of visual bulk.
Keeps the factory features. ADD built the bumper to retain the OEM parking sensors, license plate lights, trailer plug and wiring, and all recovery points, so nothing on the truck has to be given up.
Light mounts on the wings. A pair of side wing mounts accepts cube lights for extra light behind the truck in low-light conditions.
Finish and install. Made from steel with a 2-stage hammer black powder coat, the bumper installs fully bolt-on and is made in the USA.
Features
- Low-profile steel design
- Pair of side cube light mounts
- Retains OEM parking sensors
- Retains OEM license plate lights
- Retains OEM trailer plug and wiring
- Retains OEM recovery points
- 2-stage hammer black powder coat finish
- Fully bolt-on installation
- Made in the USA
Prop 65. WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Fitment: Ford F-150 Raptor 2021-2026 and F-150 Raptor R 2023-2026. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Installation Instructions (ADD)Installation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$2,339.08
The Addictive Desert Designs Rock Fighter is a winch-ready front bumper made specifically for the Ford Bronco Raptor, with high clearance and approach angles for rough terrain.
Shaped to the Raptor. The modern radius plate-steel design flows with the contours of the Raptor-style fender flares.
Skid plate included. A vented skid plate with louvers is part of the bumper, so air still reaches the intercooler.
Recovery ready. A standard winch mount is built in, along with two reinforced clevis mounts that accept soft shackles.
Lighting. A universal light mount in the center takes up to a 20 in. radius LED light bar or five cube lights, and two light mounts on top take round lights. The bumper retains the OEM parking sensors.
Cruise control. ADD's Adaptive Cruise Control relocation bracket is available separately.
Features
- Modern radius plate steel design
- Universal light mount for a 20 in. radius light bar or five cube lights
- Two light mounts on top for round lights
- Vented skid plate with louvers for intercooler airflow
- Standard winch mount
- Retains OEM parking sensors
- Reinforced clevis mounts that accept soft shackles
- Fully bolt-on, made in America
Fitment: 2022-2026 Ford Bronco Raptor. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Bumper Install GuideACC Bracket Install Guide
Installation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Ford | Bronco | Raptor |
$53.08
When you swap the factory lower grille shutters out for an aftermarket front bumper, the truck still expects its shutter motor to be there. This Addictive Desert Designs relocation kit moves the motor to a new position so it stays connected and active, and your 2024-2026 Ford F-150 Raptor does not throw warning lights on the dash.
Built for ADD bumper installs. Addictive Desert Designs states that the kit is necessary on any 2024+ Raptor fitted with one of its front bumpers.
Hidden, low-profile mounting. The bracket finishes in brushed aluminum and mounts discreetly, so it sits out of sight once the bumper is on.
American made. The kit is designed and manufactured in the USA by Addictive Desert Designs.
Features
- Relocates the shutter motor for aftermarket bumpers
- Brushed aluminum finish
- Discreet, low-profile mounting
- Made in the USA
Fitment: 2024-2026 Ford F-150 Raptor. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Install InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | F-150 | Raptor |
$1,349.08
The Stealth Fighter is a low-profile chase rack that adds a finished, factory-style look to a Ford F-150 Raptor without making the bed busy. It bolts on without drilling, and the upper section carries slots for extra lighting.
Lighting where you need it. Mounting slots on the upper piece let you add a 50 in. LED light bar for night driving.
Brake light stays in play. The third brake light function is fully retained, so the rack does not take away a safety feature.
Bed space untouched. The rack mounts without giving up any cargo room, so the bed stays usable.
Built and finished in the USA. A hammer black powder coat gives it a durable, textured finish.
Features
- Fully bolt-on, no drilling required
- Mounts a 50 in. LED light bar
- Retains third brake light function
- Does not impede cargo space
- Hammer black powder coat finish
- Made in the USA
Prop 65 warning. This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Fitment: Ford F-150 from 2015 to 2022, including the Raptor (Raptor years 2017-2022). Fitment confirmed against Addictive Desert Designs' published application list.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2022 | Ford | F-150 | Raptor |
| 2015-2022 | Ford | F-150 | All trims, including Raptor |
$2,249.08
The Stealth Fighter is Addictive Desert Designs' steel plate front bumper for the 2018-2020 Ford F-150 Raptor. ADD describes it as one of its tightest fitting and most aggressive bumpers, built to follow the factory lines while adding real steel protection up front.
Tight, factory-style fit. A modern radius plate design keeps the bumper close to the front of the truck, matching the stock look instead of hanging out in front of it.
Room for serious lighting. The center of the bumper has a universal light mount system that takes up to 10 cube lights or a 40 in. radius or straight LED bar, or anything in between. Extra mounts behind the side panels take 10 in. SR LED bars.
Made for recovery gear. Reinforced clevis mounts accept soft shackles. ADD recommends its separate frame reinforcement kit when you use soft shackles, which gives the factory frame horns added strength with a winch or soft shackles and is bolt-on.
Everything for the lights is in the box. It ships with ADD's Universal Light Mount Kit so you can install any brand and size of lighting. The design is covered by US Patent 9,796,343.
Features
- Modern radius plate design
- Direct fit, no cutting or welding required
- Fully bolt-on
- Universal center light mount for up to 10 cube lights or a 40 in. straight or radius LED
- Mounts for 10 in. SR LEDs on the sides
- Reinforced clevis mounts accept soft shackles
- Laser cut skid plates, tabs and plates
- 0.120 in. wall steel tube construction
- Fully boxed frame horns
- Hammer black powder coat finish
- Stainless steel hardware
Fitment: ADD lists this part for the 2018-2020 F-150, which includes the Raptor, and does not name any exclusion for the Raptor. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Install InstructionsInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018-2020 | Ford | F-150 | Raptor |
| 2018-2020 | Ford | F-150 | All trims |
$2,429.08
The Stealth Fighter is Addictive Desert Designs' best-known bumper line, and this version is built for the third-generation Ford F-150 Raptor and the Raptor R. It follows the truck's body lines closely while improving ground clearance and approach angle over the factory bumper.
A tight fit with room for lights. The face of the bumper sits only 1/2 inch proud of the OEM bumper, yet it still has space to hide LED lighting inside. The center mount takes a 40-inch radius light bar or up to ten LED cube lights, and two side mounts hold RIGID 10-inch SR light bars. The side mounts sit behind satin black aluminum panels with vented slots, so unused openings never leave empty holes.
Protection and recovery. Modern radius plate steel gives more protection than the factory bumper, and two reinforced clevis mounts accept soft shackles for recovery. A hammer black powder coat guards against rust and suits the factory exterior trim.
Keeps the factory hardware working. The OEM parking sensors and tow hooks are retained and the bumper is fully bolt-on and made in America. A shutter motor bracket is included. For trucks with adaptive cruise control, ADD offers a separate ACC relocation bracket (sold separately) that moves the sensor behind the grille.
Works with ADD cooling upgrades and winch kit. ADD lists the bumper as compatible with its Raptor Intercooler Kit (IC1650KIT) and the Raptor R High Mount Heat Exchanger Kit (AC21112301NA), both sold separately; a 2024+ truck with the intercooler upgrade needs an additional shutter motor relocation kit. ADD also sells a Stealth Fighter Winch Kit conversion for this bumper.
Features
- Modern radius plate steel design
- Universal light mount kit included for any size or brand of lighting
- Center mount fits a 40-inch radius light bar or up to 10 cube lights
- Side mounts for RIGID 10-inch SR LED lights
- Reinforced clevis mounts accept soft shackles
- Retains OEM parking sensors and tow hooks
- Satin black aluminum side panels, hammer black powder coat
- Shutter motor bracket included
- Fully bolt-on, made in America
Fitment: 2021-2026 Ford F-150 Raptor and 2023-2026 Ford F-150 Raptor R. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Bumper & Winch Kit Install GuideInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$1,799.08
The Stealth Fighter Rear Bumper from Addictive Desert Designs is one of the brand's slimmest bumpers, made for the 2021+ Ford F-150 Raptor and Raptor R. It follows the body lines of the truck and suits the factory dovetail styling. This version comes in hammer black with two cube lights.
Slim and strong. Modern radius plate steel gives the bumper more protection than the factory rear bumper while measuring the same length from the tailgate. Recessed satin black powder coated aluminum panels cut weight.
Light mounts. Behind each panel are mounting points for rear-facing LED cube lights, handy for lighting up the bed in low light. Two integrated license plate lights come with the bumper.
Keeps the factory hardware. The bumper retains the OEM tow hitch, tow hooks, and dual exhaust, and sensor cutouts let the factory parking sensors keep working.
Features
- Modern radius plate steel design
- Complements the factory dovetail style
- 2 universal cube light mounts
- Integrated license plate lights
- Reinforced clevis mounts accept soft shackles
- Retains OEM tow hooks, tow hitch, and dual exhaust
- Retains OEM parking sensors
- Bumper color: hammer black; panel color: satin black
- Fully bolt-on
- Made in America
California Proposition 65. WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Fitment: 2021+ Ford F-150 Raptor and Raptor R. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Install InstructionsInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021+ | Ford | F-150 | Raptor, Raptor R |
$269.08
This tailgate molle panel from Addictive Desert Designs (ADD) adds a mounting surface to the cargo area of the Ford Bronco Raptor and other 2021-2026 Broncos, so recovery gear, pouches, tools and a fire extinguisher stay secured and within reach.
Molle pattern for many mounting styles. The panel works with straps, bolts, quick-fists and zip ties. ADD states its device mounts are compatible with Ram Diamond Base mounts, Bulletpoint mounting solutions and Quad Lock systems and base plates, and the accessory holes are spaced 1.9 in. (48.5 mm) apart to the AMPS standard.
Cut from steel. The panel is CNC cut from 1/8 in. steel with a hammer black powder coat, which keeps it rigid on rough trails and protects it from rust and corrosion.
Sits flat against the tailgate. Wide mounting points hold it flush with the tailgate, a horizontal offset keeps it from touching the paint, and it leaves room for the third brake light wiring. Installation is fully bolt-on, and it is made in the USA.
Features
- CNC cut from 1/8 in. steel
- Hammer black powder coat finish
- Compatible with straps, bolts, quick-fists and other mounting solutions
- Accessory holes spaced 1.9 in. / 48.5 mm apart (AMPS standard)
- Mounts first aid kits, tools, devices and more
- Flush fit against the tailgate, with room for third brake light wiring
- Fully bolt-on, made in the USA
Prop 65. WARNING: This product can expose you to chemicals including crystalline silica, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Fitment: 2022-2026 Ford Bronco Raptor, plus 2021-2026 Ford Bronco. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Installation InstructionsInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Ford | Bronco | Raptor |
| 2021-2026 | Ford | Bronco | All trims |
$50.39
AEM Dryflow Air Filters are engineered with advanced synthetic filtration media that delivers an ideal balance of high airflow, exceptional particle filtration, and long-term performance. Built using durable, oil-free filter material, Dryflow filters provide reliable protection, effortless cleaning, and consistent airflow. This offers a maintenance-friendly solution designed to support both everyday driving and high-performance applications.
Installation Instructions- Will NOT void your vehicle’s warranty, performance you can install with total confidence.
- Limited Lifetime Warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2025-2026 | Ford | Expedition | Active |
| 2007-2010 | Ford | Expedition | Eddie Bauer |
| 2007-2010 | Ford | Expedition | EL Eddie Bauer |
| 2008-2017 | Ford | Expedition | EL King Ranch |
| 2007-2017 | Ford | Expedition | EL Limited |
| 2015-2017 | Ford | Expedition | EL Platinum |
| 2016-2017 | Ford | Expedition | EL SSV |
| 2011-2017 | Ford | Expedition | EL XL |
| 2007-2017 | Ford | Expedition | EL XLT |
| 2008 | Ford | Expedition | Funkmaster Flex Edition |
| 2008-2017,2020-2026 | Ford | Expedition | King Ranch |
| 2007-2024 | Ford | Expedition | Limited |
| 2025-2027 | Ford | Expedition | Max Active |
| 2020-2026 | Ford | Expedition | Max King Ranch |
| 2018-2024 | Ford | Expedition | Max Limited |
| 2018-2026 | Ford | Expedition | Max Platinum |
| 2018-2026 | Ford | Expedition | Max SSV |
| 2018-2019,2022 | Ford | Expedition | Max XL |
| 2018-2024 | Ford | Expedition | Max XLT |
| 2015-2026 | Ford | Expedition | Platinum |
| 2016-2026 | Ford | Expedition | SSV |
| 2022-2024 | Ford | Expedition | Timberline |
| 2025-2026 | Ford | Expedition | Tremor |
| 2011-2019,2022 | Ford | Expedition | XL |
| 2023-2024 | Ford | Expedition | XL STX |
| 2007-2024 | Ford | Expedition | XLT |
| 2010-2014 | Ford | F-150 | FX2 |
| 2009-2014 | Ford | F-150 | FX4 |
| 2010-2012 | Ford | F-150 | Harley-Davidson Edition |
| 2009-2026 | Ford | F-150 | King Ranch |
| 2009-2026 | Ford | F-150 | Lariat |
| 2011 | Ford | F-150 | Lariat Limited |
| 2013-2014,2016-2023 | Ford | F-150 | Limited |
| 2009-2026 | Ford | F-150 | Platinum |
| 2018-2026 | Ford | F-150 | Police Responder |
| 2017-2025 | Ford | F-150 | Raptor |
| 2016-2026 | Ford | F-150 | SSV |
| 2009-2014,2024-2026 | Ford | F-150 | STX |
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2021-2026 | Ford | F-150 | Tremor |
| 2009-2026 | Ford | F-150 | XL |
| 2009-2026 | Ford | F-150 | XLT |
| 2009-2010 | Ford | F-250 Super Duty | Cabela's |
| 2008-2009 | Ford | F-250 Super Duty | FX4 |
| 2008-2009 | Ford | F-250 Super Duty | Harley-Davidson Edition |
| 2008-2016 | Ford | F-250 Super Duty | King Ranch |
| 2008-2016 | Ford | F-250 Super Duty | Lariat |
| 2013-2016 | Ford | F-250 Super Duty | Platinum |
| 2008-2016 | Ford | F-250 Super Duty | XL |
| 2008-2016 | Ford | F-250 Super Duty | XLT |
| 2009-2010 | Ford | F-350 Super Duty | Cabela's |
| 2008-2009 | Ford | F-350 Super Duty | FX4 |
| 2008-2009 | Ford | F-350 Super Duty | Harley-Davidson Edition |
| 2008-2016 | Ford | F-350 Super Duty | King Ranch |
| 2008-2016 | Ford | F-350 Super Duty | Lariat |
| 2013-2016 | Ford | F-350 Super Duty | Platinum |
| 2008-2016 | Ford | F-350 Super Duty | XL |
| 2008-2016 | Ford | F-350 Super Duty | XLT |
| 2008-2015,2019-2024 | Lincoln | Navigator | Base |
| 2018-2026 | Lincoln | Navigator | Black Label |
| 2008-2015 | Lincoln | Navigator | L |
| 2022 | Lincoln | Navigator | L Base |
| 2018-2026 | Lincoln | Navigator | L Black Label |
| 2020-2026 | Lincoln | Navigator | L Livery |
| 2007 | Lincoln | Navigator | L Luxury |
| 2026 | Lincoln | Navigator | L Premiere |
| 2016-2026 | Lincoln | Navigator | L Reserve |
| 2016-2019 | Lincoln | Navigator | L Select |
| 2007 | Lincoln | Navigator | L Ultimate |
| 2007 | Lincoln | Navigator | Luxury |
| 2018,2026 | Lincoln | Navigator | Premiere |
| 2016-2026 | Lincoln | Navigator | Reserve |
| 2016-2019 | Lincoln | Navigator | Select |
| 2007 | Lincoln | Navigator | Ultimate |
The aFe 65mm Throttle Body replaces the factory 60mm throttle body on the 3.0L twin-turbo EcoBoost V6 in the Ford Bronco Raptor and Ranger Raptor with a larger bore that lets the engine move more air. More airflow helps horsepower and throttle response, and aFe quotes gains of up to 8 HP and 12 lb-ft of torque. The gains are more noticeable as you add other upgrades.
Larger bore, same footprint. The 65mm opening is 5mm larger than the stock unit. It uses all of the factory mounting locations, which keeps the installation stable and straightforward.
Plug-and-play electronics. The factory-style electronic connector plugs into the truck's harness. No tuning is required.
Simple bolt-on. It is a direct bolt-on part that needs no cutting or modification to the intake tract.
Features
- 65mm bore diameter, up from the stock 60mm
- Up to +8 HP and +12 lb-ft of torque
- Plug-and-play electronics
- Direct bolt-on using the factory mounting locations
- No tuning required
Emissions
aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists this throttle body for the 2022-2025 Ford Bronco Raptor and the 2024-2025 Ford Ranger Raptor, both with the 3.0L twin-turbo EcoBoost V6, along with a long list of other Ford and Lincoln EcoBoost models. aFe does not list it for any F-150 Raptor. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2025 | Ford | Bronco | Raptor 3.0L V6 EcoBoost |
| 2024-2025 | Ford | Ranger | Raptor 3.0L V6 EcoBoost |
| 2021-2025 | Ford | Bronco | 2.3L I4 EcoBoost |
| 2021-2025 | Ford | Bronco | 2.7L V6 EcoBoost |
| 2019-2025 | Ford | Ranger | 2.3L I4 EcoBoost |
| 2024-2025 | Ford | Ranger | 2.7L V6 EcoBoost |
| 2018-2025 | Ford | F-150 | 2.7L V6 EcoBoost |
| 2019-2024 | Ford | Edge | 2.7L V6 EcoBoost |
| 2020-2023 | Ford | Explorer | 2.3L I4 EcoBoost |
| 2020-2026 | Ford | Explorer ST | 3.0L V6 EcoBoost |
| 2018-2023 | Ford | Mustang | 2.3L I4 EcoBoost |
| 2020-2025 | Ford | Police Interceptor Utility | 3.0L V6 EcoBoost |
| 2020-2026 | Lincoln | Aviator | 3.0L V6 EcoBoost |
| 2019-2023 | Lincoln | Nautilus | 2.7L V6 EcoBoost |
The aFe 73mm Throttle Body replaces the factory 68mm throttle body on the 3.5L twin-turbo EcoBoost V6 with a larger bore that lets the engine move more air. More airflow helps horsepower and throttle response, and aFe quotes gains of up to 16 HP and 24 lb-ft of torque. The gains are most noticeable as you add other upgrades such as an intake or exhaust.
Larger bore, same footprint. The 73mm opening is about 5mm larger than the stock throttle body. It uses all of the factory mounting locations, so it bolts on without any fabrication.
Plug-and-play electronics. The throttle body keeps the factory-style electronic connector, so it plugs into the truck's harness. No tuning is required.
Straightforward installation. Because it is a direct bolt-on, the swap is a simple job that needs no cutting or modification to the intake tract.
Features
- 73mm bore diameter, up from the stock 68mm
- Up to +16 HP and +24 lb-ft of torque
- Plug-and-play electronics
- Direct bolt-on using the factory mounting locations
- No tuning required
Emissions
aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists this throttle body for the 2017-2026 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6, along with 2017-2026 F-150 3.5L trucks, the 2018-2026 Expedition and Navigator 3.5L, 2020-2026 Transit 3.5L and several 3.3L models. aFe does not list it for the 2023-2026 F-150 Raptor R. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor 3.5L V6 EcoBoost |
| 2017-2026 | Ford | F-150 | 3.5L V6 EcoBoost |
| 2018-2023 | Ford | F-150 | 3.3L V6 |
| 2018-2026 | Ford | Expedition | 3.5L V6 EcoBoost |
| 2018-2026 | Lincoln | Navigator | 3.5L V6 EcoBoost |
| 2020-2026 | Ford | Transit-150, 250, 350, 350 HD | 3.5L V6 EcoBoost |
| 2020-2023 | Ford | Explorer | 3.3L V6 Hybrid |
| 2020-2026 | Ford | Police Interceptor Utility | 3.3L V6 and 3.3L V6 Hybrid |
The aFe POWER BladeRunner 2-1/2 in hot charge pipe replaces the factory hot side charge pipe on the 2021-2026 Ford F-150 Raptor and its 3.5L twin-turbo EcoBoost V6. aFe reports it outflows the factory charge pipe by up to 13%.
Smoother flow, less pressure loss. The mandrel-bent, TIG-welded aluminum pipe has smooth transitions that decrease turbulence and pressure loss, which aFe says increases horsepower and torque.
Premium hardware. The kit includes stainless-steel, spring-loaded T-bolt clamps and heavy-duty 5-ply, polyester-reinforced silicone couplings for strength and durability.
Finish and sensor ports. The pipe is powder coated in wrinkle black for heat and corrosion resistance and carries a laser-etched aFe POWER logo. 1/8 in NPT ports are provided for sensors or water-methanol injection.
Features
- Outflows the factory charge pipe by up to 13%
- TIG-welded 2-1/2 in aluminum pipe
- Stainless-steel spring-loaded T-bolt clamps and 5-ply silicone couplings
- 1/8 in NPT ports for sensors or water-methanol injection
- Wrinkle black powder coat for heat and corrosion resistance
Emissions: aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the 2021-2026 Ford F-150 Raptor with the V6-3.5L (tt) EcoBoost, plus the 2021-2026 F-150 with the same engine; the 5.2L supercharged Raptor R is not listed. aFe notes it does not fit PowerBoost models. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | All trims, V6-3.5L (tt) EcoBoost (not PowerBoost) |
The aFe POWER BladeRunner 2-1/2 in hot side intercooler tube kit replaces the factory hot side charge tubes on the 2017-2020 Ford F-150 Raptor with its 3.5L twin-turbo EcoBoost V6. aFe reports it outflows the factory intercooler tubes by up to 13%, and the kit installs at the factory mounting locations.
Smoother flow, less pressure loss. The mandrel-bent, TIG-welded aluminum tubing has smooth transitions that cut turbulence and pressure loss, which aFe says increases horsepower and torque.
Hardware included. The kit comes with stainless-steel clamps and heavy-duty 5-ply, polyester-reinforced silicone couplings.
Finish and sensor ports. The tubes are powder coated in wrinkle black for heat and corrosion resistance and carry a laser-etched aFe POWER logo. 1/8 in NPT ports are provided for sensors or water-methanol injection.
Features
- Outflows the factory intercooler tubes by up to 13%
- TIG-welded 2-1/2 in aluminum tubing
- Premium stainless-steel clamps and 5-ply silicone couplings
- 1/8 in NPT ports for sensors or water-methanol injection
- Wrinkle black powder coat for heat and corrosion resistance
- Uses the factory mounting locations
Emissions: aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the 2017-2020 Ford F-150 and F-150 Raptor with the V6-3.5L (tt) EcoBoost. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
| 2017-2020 | Ford | F-150 | All trims, V6-3.5L (tt) EcoBoost |
The aFe POWER BladeRunner 2-1/4 in hot charge pipe replaces the factory hot side charge pipe on the 2022-2026 Ford Bronco Raptor and the 2024-2026 Ford Ranger Raptor, both powered by the 3.0L twin-turbo EcoBoost V6. aFe's flow bench shows 325 CFM against 270 CFM for the stock pipe (+20%).
Smoother flow, less pressure loss. The mandrel-bent, TIG-welded aluminum pipe has smooth transitions that decrease turbulence and pressure loss, which aFe says increases horsepower and torque.
Premium hardware. The kit includes stainless-steel SmartSeal clamps and heavy-duty 5-ply, polyester-reinforced silicone couplings. Factory-style quick-connect adaptors with O-ring seals keep the connections leak-free, and a built-in CNC-machined aluminum blow-off valve adapter is included.
Finish and sensor ports. The pipe is powder coated in wrinkle black for heat and corrosion resistance and carries a laser-etched aFe POWER logo. 1/8 in NPT ports are provided for sensors or water-methanol injection.
Features
- TIG-welded 2-1/4 in aluminum hot side pipe
- Factory-style quick-connect adaptors with O-ring seals
- Stainless-steel SmartSeal clamps and 5-ply silicone couplings
- Built-in CNC-machined aluminum blow-off valve adapter
- 1/8 in NPT ports for sensors or water-methanol injection
- Wrinkle black powder coat for heat and corrosion resistance
Emissions: aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the 2022-2026 Ford Bronco Raptor and the 2024-2026 Ford Ranger Raptor with the V6-3.0L (tt) EcoBoost. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Ford | Bronco | Raptor |
| 2024-2026 | Ford | Ranger | Raptor |
The aFe POWER BladeRunner 3 in aluminum cold charge pipe replaces the restrictive factory cold-side charge pipe on the 2022-2026 Ford Bronco Raptor and the 2024-2026 Ford Ranger Raptor, both powered by the 3.0L twin-turbo EcoBoost V6. On aFe's flow bench the pipe moved 345 CFM against 285 CFM for the stock cold-side pipe, a 21% gain.
Smoother flow, less pressure loss. Mandrel-bent aluminum tubing with smooth transitions cuts turbulence and pressure loss between the turbos and the engine, which aFe says helps horsepower and torque.
Hardware included. The kit ships with stainless-steel SmartSeal clamps and heavy-duty 5-ply, polyester-reinforced silicone couplings. A factory-style quick-connect adaptor with an O-ring seal keeps the connection leak-free while holding up to heat and boost.
Finish and sensor port. The TIG-welded pipe is powder coated in wrinkle black for heat and corrosion resistance and carries a laser-etched aFe POWER logo. A 1/8 in NPT port is provided for a sensor or water-methanol injection.
Features
- TIG-welded 3 in aluminum cold charge pipe
- Factory-style quick-connect adaptor with O-ring seal
- Stainless-steel SmartSeal clamps and 5-ply silicone couplings
- 1/8 in NPT port for sensors or water-methanol injection
- Wrinkle black powder coat for heat and corrosion resistance
Emissions: aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the 2022-2026 Ford Bronco Raptor and the 2024-2026 Ford Ranger Raptor with the V6-3.0L (tt) EcoBoost. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Ford | Bronco | Raptor |
| 2024-2026 | Ford | Ranger | Raptor |
The aFe POWER BladeRunner cold side intercooler tube replaces the factory cold side tube on the 2017-2020 Ford F-150 Raptor with its 3.5L twin-turbo EcoBoost V6. It steps from 3-1/2 in to 3 in mandrel-bent aluminum tubing, and aFe says it outflows the stock intercooler tube by 17%.
Smoother flow, less pressure loss. Smooth-transition bends decrease turbulence and minimize pressure loss, which aFe says increases horsepower and torque. The tube is powder coated in wrinkle black; the high-temperature coating insulates it from engine heat and protects it from corrosion.
Factory-style connection. A billet aluminum, factory-style quick-connect adapter seals with an O-ring, and the tube uses the factory mounting locations. It includes stainless-steel clamps and heavy-duty 5-ply silicone couplings.
Works with stock or aFe intercooler. aFe states the tube fits with the OE intercooler or with its upgraded intercooler (46-20291). A 1/8 in NPT port is provided for a pressure sensor or water-methanol injection, and a welded-on aluminum aFe POWER logo plate finishes the look.
Features
- Outflows the stock intercooler tube by 17%
- 3-1/2 in to 3 in mandrel-bent aluminum tubing
- Powder-coated wrinkle black for heat resistance
- Cold side tube fitment
- 5-ply polyester-reinforced silicone coupling and stainless-steel clamps
- Works with the aFe POWER or OE intercooler
- 1/8 in NPT port for a pressure sensor or water-methanol injection
Emissions: aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the 2017-2020 Ford F-150 and F-150 Raptor with the V6-3.5L (tt) EcoBoost. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
| 2017-2020 | Ford | F-150 | All trims, V6-3.5L (tt) EcoBoost |
The aFe POWER BladeRunner hot and cold charge pipe kit replaces the factory charge pipes on the 2021-2026 Ford F-150 Raptor and its 3.5L twin-turbo EcoBoost V6. aFe reports the hot side outflows the factory pipe by up to 13% and the cold side by up to 19%.
Smoother flow, lower temperatures. Mandrel-bent aluminum pipes with smooth transitions decrease turbulence and pressure loss. aFe says the kit gives a smoother path between the turbos and the engine for lower operating temperatures and more power.
Premium hardware. The kit includes stainless-steel, spring-loaded T-bolt clamps and heavy-duty 5-ply, polyester-reinforced silicone couplings. A factory-style billet aluminum quick-connect adapter with an O-ring seal keeps the connection leak-free.
Finish and sensor ports. The pipes are powder coated in wrinkle black for heat and corrosion resistance and carry a laser-etched aFe POWER logo. 1/8 in NPT ports are provided for sensors or water-methanol injection.
Features
- Hot side outflows the factory charge pipe by up to 13%
- Cold side outflows the factory charge pipe by up to 19%
- TIG-welded 2-1/2 in hot side and 3 in to 3-1/2 in cold side aluminum pipes
- Factory-style quick-connect with an O-ring seal
- Stainless-steel spring-loaded T-bolt clamps and 5-ply silicone couplings
- 1/8 in NPT ports for sensors or water-methanol injection
- Wrinkle black powder coat for heat and corrosion resistance
Emissions: aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the 2021-2026 Ford F-150 Raptor with the V6-3.5L (tt) EcoBoost, plus the 2021-2026 F-150 with the same engine; the 5.2L supercharged Raptor R is not listed. aFe notes it does not fit PowerBoost models. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | All trims, V6-3.5L (tt) EcoBoost (not PowerBoost) |
The aFe POWER BladeRunner hot and cold charge pipe kit replaces the factory charge pipes on the 2022-2026 Ford Bronco Raptor and the 2024-2026 Ford Ranger Raptor, both powered by the 3.0L twin-turbo EcoBoost V6. aFe's flow bench shows the hot side at 325 CFM against 270 CFM stock (+20%) and the cold side at 345 CFM against 285 CFM stock (+21%).
Smoother flow, lower temperatures. Mandrel-bent aluminum pipes with smooth transitions decrease turbulence and pressure loss. aFe says the kit gives a smoother path between the turbos and the engine for lower operating temperatures and more power.
Premium hardware. The kit includes stainless-steel SmartSeal clamps and heavy-duty 5-ply, polyester-reinforced silicone couplings. Factory-style quick-connect adaptors with O-ring seals keep the connections leak-free, and a built-in CNC-machined aluminum blow-off valve adapter is included.
Finish and sensor ports. The pipes are powder coated in wrinkle black for heat and corrosion resistance and carry a laser-etched aFe POWER logo. 1/8 in NPT ports are provided for sensors or water-methanol injection.
Features
- TIG-welded 2-1/4 in hot side and 3 in cold side aluminum pipes
- Factory-style quick-connect adaptors with O-ring seals
- Stainless-steel SmartSeal clamps and 5-ply silicone couplings
- Built-in CNC-machined aluminum blow-off valve adapter
- 1/8 in NPT ports for sensors or water-methanol injection
- Wrinkle black powder coat for heat and corrosion resistance
Emissions: aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the 2022-2026 Ford Bronco Raptor and the 2024-2026 Ford Ranger Raptor with the V6-3.0L (tt) EcoBoost. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Ford | Bronco | Raptor |
| 2024-2026 | Ford | Ranger | Raptor |
The aFe POWER BladeRunner hot and cold charge pipe kit in textured red replaces the factory charge pipes on the 2022-2026 Ford Bronco Raptor and the 2024-2026 Ford Ranger Raptor, both powered by the 3.0L twin-turbo EcoBoost V6. aFe's flow bench shows the hot side at 325 CFM against 270 CFM stock (+20%) and the cold side at 345 CFM against 285 CFM stock (+21%).
Smoother flow, lower temperatures. Mandrel-bent aluminum pipes with smooth transitions decrease turbulence and pressure loss. aFe says the kit gives a smoother path between the turbos and the engine for lower operating temperatures and more power.
Premium hardware. The kit includes stainless-steel SmartSeal clamps and heavy-duty 5-ply, polyester-reinforced silicone couplings. Factory-style quick-connect adaptors with O-ring seals keep the connections leak-free, and a built-in CNC-machined aluminum blow-off valve adapter is included.
Finish and sensor ports. The pipes are powder coated in textured red for heat and corrosion resistance and carry a laser-etched aFe POWER logo. 1/8 in NPT ports are provided for sensors or water-methanol injection.
Features
- TIG-welded 2-1/4 in hot side and 3 in cold side aluminum pipes
- Factory-style quick-connect adaptors with O-ring seals
- Stainless-steel SmartSeal clamps and 5-ply silicone couplings
- Built-in CNC-machined aluminum blow-off valve adapter
- 1/8 in NPT ports for sensors or water-methanol injection
- Textured red powder coat for heat and corrosion resistance
Emissions: aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the 2022-2026 Ford Bronco Raptor and the 2024-2026 Ford Ranger Raptor with the V6-3.0L (tt) EcoBoost. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Ford | Bronco | Raptor |
| 2024-2026 | Ford | Ranger | Raptor |
The aFe POWER Carbon Cabin Air Filter replaces the cabin filter behind the glove box on the Ford F-150 Raptor. It cleans the air that enters through the ventilation system and uses activated carbon to cut down odors and fumes, so the cab stays fresher on dusty trails and in traffic alike.
Filters dust, soot and pollen. The pleated media traps fine particles before they reach the heater and air conditioning system or the cabin.
Activated carbon for odors and fumes. Carbon granules in the media help remove smells and exhaust fumes for cleaner, fresher air for you and your passengers.
Protects the A/C system. A clean filter helps keep the A/C evaporator clean and free of microbes, and it is a better choice than a basic stock replacement.
Quick to change. It is an easy install, and the supplier recommends replacing it every 12,000 to 15,000 miles.
Features
- Activated carbon layer reduces odors and fumes
- Captures dust, soot and pollen
- Helps keep the A/C evaporator clean and microbe-free
- Better than a stock replacement cabin filter
- Recommended replacement every 12,000 to 15,000 miles
- Easy to install
Emissions. aFe states that this product does not require a CARB EO number.
Fitment: aFe lists this filter for 2015-2025 Ford F-150 models with the 2.7L and 3.5L EcoBoost, 5.0L, 3.3L and 3.0L diesel engines, and for the 2023 F-150 with the 5.2L supercharged V8, with no trim restriction. That covers the 3.5L EcoBoost HO in the 2017-2025 F-150 Raptor and the 5.2L supercharged V8 in the 2023 F-150 Raptor R. aFe's page lists no exclusion for the Raptor. Fitment confirmed against aFe's published application list.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2025 | Ford | F-150 | Raptor |
| 2023 | Ford | F-150 | Raptor R |
| 2015-2025 | Ford | F-150 | V6-2.7L (tt) EcoBoost |
| 2015-2025 | Ford | F-150 | V6-3.5L (tt) EcoBoost |
| 2015-2025 | Ford | F-150 | V8-5.0L |
| 2018-2021 | Ford | F-150 | V6-3.0L (td) Power-Stroke Diesel |
| 2018-2023 | Ford | F-150 | V6-3.3L |
| 2023 | Ford | F-150 | V8-5.2L (sc) |
| 2018-2024 | Ford | Expedition | V6-3.5L (tt) EcoBoost |
| 2017-2023 | Ford | F-250 Super Duty | V8-6.2L |
| 2017-2023 | Ford | F-250 Super Duty | V8-6.7L (td) Power-Stroke Diesel |
| 2020-2023 | Ford | F-250 Super Duty | V8-7.3L |
| 2017-2023 | Ford | F-350 Super Duty | V8-6.2L |
| 2017-2023 | Ford | F-350 Super Duty | V8-6.7L (td) Power-Stroke Diesel |
| 2020-2023 | Ford | F-350 Super Duty | V8-7.3L |
| 2017-2023 | Ford | F-450 Super Duty | V8-6.7L (td) Power-Stroke Diesel |
| 2018-2019 | Ford | F-450 Super Duty | V10-6.8L |
| 2018-2023 | Ford | F-450 Super Duty | V8-7.3L |
| 2018-2019 | Ford | F-550 Super Duty | V10-6.8L |
| 2018-2023 | Ford | F-550 Super Duty | V8-6.7L (td) Power-Stroke Diesel |
| 2020-2023 | Ford | F-550 Super Duty | V8-7.3L |
| 2018-2024 | Lincoln | Navigator | V6-3.5L (tt) |
These aFe CONTROL wheel spacers move your wheels outward by 1.5 inches. They suit a 6x135 bolt pattern with an 87.1 mm center bore, which is the Ford F-150 Raptor's hub. Fitting them lowers the effective offset of the wheel, giving a wider stance, a more aggressive fit and extra room for brakes and suspension parts. The wider track also helps handling and stability.
Forged and heat-treated. Each spacer is machined from a forged 6061-T6 aluminum blank and CNC machined to tight tolerances for strength and a precise fit. aFe designs them in-house.
Hub-centric design. The spacer centers the wheel on the hub, so wheel loads go through the hub instead of the studs and there is no vibration from an off-center wheel.
Ready to install. Studs and lug nuts are included, the finish is black anodized, and the logo and size are laser etched on each spacer. They are sold as a pair.
Check clearance. A 1.5 in. spacer pushes the wheel and tire outward, so confirm the tire has room at the fender and suspension before you drive, especially with wide wheels or low-offset wheels.
Features
- Forged and heat-treated 6061-T6 aluminum
- Bolt pattern: 6x135
- Center bore: 87.1 mm, hub-centric
- Thickness: 1.5 in.
- Studs and lug nuts included
- Black anodized finish with laser-etched logo and sizing
- Sold as a pair
Emissions
aFe states this product does not require a CARB EO number.
Fitment: aFe lists these spacers for the 2017-2026 Ford F-150 Raptor with the 3.5L V6 twin-turbo EcoBoost, along with 2015-2026 F-150 trucks with several engines. The 6x135 bolt pattern and 87.1 mm bore match the F-150 Raptor. aFe does not list them for the 2023-2026 Raptor R. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2015-2026 | Ford | F-150 | 3.5L V6 EcoBoost |
| 2015-2026 | Ford | F-150 | 2.7L V6 EcoBoost |
| 2015-2026 | Ford | F-150 | 5.0L V8 |
| 2015-2017 | Ford | F-150 | 3.5L V6 |
| 2018-2023 | Ford | F-150 | 3.3L V6 |
| 2018-2021 | Ford | F-150 | 3.0L V6 Power Stroke Diesel |
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.