Welcome to RaptorsOnly.com
-
Brands
Shop by brand
- 3D MAXpider
- Access
- Addictive Desert Designs
- Advan
- AEM Induction
- aFe
- Air Lift
- Airaid
- Alcon
- AlphaRex
- AMP Research
- AMS
- Anderson Composites
- ANZO
- ARB
- Atturo Tire
- AutoMeter
- AVS
- AWE Tuning
- BackRack
- Baer Brakes
- Baja Designs
- BAK
- Banks Power
- BBK
- BBS
- BD Diesel
- Belltech
- Bestop
- BFGoodrich
- BMC
- Body Armor 4x4
- Borla
- Brembo
- Brembo OE
- Bully Dog
- Bushwacker
- Camburg
- Clevite
- COBB
- Cometic Gasket
- COMP Cams
- CORSA Performance
- Covercraft
- CSF
- DBA
- DeatschWerks
- DFC
- Diode Dynamics
- DS18
- DV8 Offroad
- Eaton
- EBC
- Eibach
- Enkei
- Extang
- Fabtech
- Fel-Pro
- fifteen52
- Firestone
- Flowmaster
- Ford Racing
- Forgestar
- FORM Lighting
- FOX
- Garrett
- Gates
- GEN-Y Hitch
- Go Fast Bits
- Go Rhino
- Gram Lights
- Granatelli Motor Sports
- GSC Power Division
- Hawk Performance
- Hella
- Hellwig
- Hotchkis
- Husky Liners
- ICON
- Injen
- J&L
- JBA
- JLT
- K&N Engineering
- KC HiLiTES
- King Engine Bearings
- King Shocks
- Kleinn Air Horns
- Kooks Headers
- KYB
- LIQUI MOLY
- LUND
- Magnaflow
- Mahle OE
- Maxtrac
- Mayhem
- MBRP
- McGard
- Method Wheels
- MGP
- Michelin
- Mickey Thompson
- Mishimoto
- Moog
- Motul
- MTX Wheels
- N-Fab
- Nacho Offroad Technology
- NGK
- Nitrous Express
- Odyssey Battery
- ORACLE Lighting
- PowerStop
- Putco
- QA1
- Raceline
- Radium Engineering
- Rally Armor
- Rampage
- Raxiom
- Retrax
- Rhino-Rack
- Ridetech
- Rigid Industries
- Rival 4x4
- RockJock
- Roll-N-Lock
- Roush
- Royal Purple
- SCT Performance
- Skyjacker
- Snow Performance
- SPC Performance
- SPOD
- Stainless Works
- Superlift
- Superpro
- Timbren
- Torque Solution
- TOYO
- Truxedo
- Tuff Country
- Turbosmart
- UMI Performance
- Undercover
- Volant
- Vossen
- Wagner Tuning
- WeatherTech
- Weld
- Westin
- Whiteline
- Wilwood
- Yokohama Tire
- Yukon Gear & Axle
- Zone Offroad
No brands found. Try another name or initial.
156 brands
View all brands -
F-150 Raptor
- F-150 Raptor
-
1st Gen (2010-2014)
-
2nd Gen (2017-2020)
-
3rd Gen (2021-Present)
-
Raptor R (2023-Present)
-
Bronco Raptor
- Bronco Raptor
-
Suspension
-
Lighting
-
Bumpers & Armor
-
Racks
-
Interior Accessories
-
Exterior Accessories
-
Performance
-
Wheels & Tires
-
Brakes
-
Drivetrain
-
Engine & Cooling
-
Ranger Raptor
- Ranger Raptor
-
Suspension
-
Lighting
-
Bumpers & Armor
-
Racks
-
Interior Accessories
-
Exterior Accessories
-
Performance
-
Wheels & Tires
-
Brakes
-
Drivetrain
-
Engine & Cooling
Your cart
Subheading
Product comparison
Describe you product comparison grid
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
46 products
46 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$310.45
A strut assembly handles vehicle weight, determines ride height, acts as the steering pivot, controls vehicle stability and can affect a vehicles electronic crash avoidance systems. As an original equipment supplier, KYB understands how your vehicle should ride, handle and perform. The KYB Strut-Plus is engineered to help restore the handling and control capabilities of your vehicle. We start with an Original Equipment (OE) Restoring KYB Strut. High carbon steel coil springs are developed considering vehicle attributes and corners weights to help make sure the ride height is restored within OE specifications.
- Engineered to help vehicles with electronic safety systems (ESC, ABS, etc.)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2017 | Subaru | Outback | 2.5i |
| 2015-2017 | Subaru | Outback | 2.5i Limited |
| 2015-2017 | Subaru | Outback | 2.5i Premium |
| 2017 | Subaru | Outback | 2.5i Touring |
| 2015-2017 | Subaru | Outback | 3.6R Limited |
| 2017 | Subaru | Outback | 3.6R Touring |
$302.34
The Gas-a-just monotube strut is available as an OE monotube replacement to restore your vehicle's original capabilities. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.
- Protect your new struts from dirt, debris and salt with a KYB Strut Boot, part number: SB123
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2008-2014 | Subaru | Impreza | WRX STI |
| 2011-2014 | Subaru | Impreza | WRX STI Limited |
| 2010 | Subaru | Impreza | WRX STI Special Edition |
$302.34
The Gas-a-just monotube strut is available as an OE monotube replacement to restore your vehicle's original capabilities. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.
- Protect your new struts from dirt, debris and salt with a KYB Strut Boot, part number: SB123
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2008-2014 | Subaru | Impreza | WRX STI |
| 2011-2014 | Subaru | Impreza | WRX STI Limited |
| 2010 | Subaru | Impreza | WRX STI Special Edition |
$46.72
Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.
- KYB has the strongest and thickest strut bodies and brackets in the industry; minimizing flex to maintain correct alignment in all conditions
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1980 | Chrysler | Cordoba | 300 |
| 1980-1983 | Chrysler | Cordoba | Base |
| 1980 | Chrysler | Cordoba | Crown |
| 1980-1982 | Chrysler | Cordoba | LS |
| 1983-1989 | Chrysler | Fifth Avenue | Base |
| 1981-1983 | Chrysler | Imperial | Base |
| 1974-1975 | Chrysler | Imperial | LeBaron |
| 1977-1981 | Chrysler | LeBaron | Base |
| 1977-1981 | Chrysler | LeBaron | Medallion |
| 1978 | Chrysler | LeBaron | S |
| 1979-1981 | Chrysler | LeBaron | Salon |
| 1980-1981 | Chrysler | LeBaron | Special |
| 1974,1979-1982 | Chrysler | New Yorker | Base |
| 1974-1978 | Chrysler | New Yorker | Brougham |
| 1974-1978 | Chrysler | Newport | Base |
| 1974-1976 | Chrysler | Newport | Custom |
| 1974-1982 | Chrysler | Town & Country | Base |
| 1976-1980 | Dodge | Aspen | Base |
| 1976-1977 | Dodge | Aspen | Custom |
| 1976-1977 | Dodge | Aspen | Special Edition |
| 1977-1981 | Dodge | Diplomat | Base |
| 1977-1983 | Dodge | Diplomat | Medallion |
| 1978 | Dodge | Diplomat | S |
| 1979-1989 | Dodge | Diplomat | Salon |
| 1984-1989 | Dodge | Diplomat | SE |
| 1981 | Dodge | Diplomat | Sport |
| 1980-1983 | Dodge | Mirada | Special Coupe |
| 1974-1976 | Dodge | Monaco | Base |
| 1974 | Dodge | Monaco | Brougham |
| 1974 | Dodge | Monaco | Custom |
| 1975-1976 | Dodge | Monaco | Royal |
| 1975-1976 | Dodge | Monaco | Royal Brougham |
| 1975-1977 | Dodge | Royal Monaco | Base |
| 1975-1977 | Dodge | Royal Monaco | Brougham |
| 1966-1970 | Nissan | 1600 | Base |
| 1967-1970 | Nissan | 2000 | Base |
| 1988 | Plymouth | Caravelle | Base |
| 1988 | Plymouth | Caravelle | SE |
| 1974 | Plymouth | Fury | Custom Suburban |
| 1974 | Plymouth | Fury | Police |
| 1974 | Plymouth | Fury | Sport Suburban |
| 1974 | Plymouth | Fury | Suburban |
| 1974 | Plymouth | Fury I | Base |
| 1974 | Plymouth | Fury I | Suburban |
| 1974 | Plymouth | Fury II | Base |
| 1974 | Plymouth | Fury II | Custom Suburban |
| 1974 | Plymouth | Fury III | Base |
| 1974 | Plymouth | Fury III | Sport Suburban |
| 1975-1977,1980-1983,1988 | Plymouth | Gran Fury | Base |
| 1975-1977 | Plymouth | Gran Fury | Brougham |
| 1975-1976 | Plymouth | Gran Fury | Custom |
| 1975-1976 | Plymouth | Gran Fury | Custom Suburban |
| 1980,1984-1989 | Plymouth | Gran Fury | Salon |
| 1975-1977 | Plymouth | Gran Fury | Sport |
| 1975-1977 | Plymouth | Gran Fury | Sport Suburban |
| 1975-1977 | Plymouth | Gran Fury | Suburban |
| 1976-1980 | Plymouth | Volare | Base |
| 1976-1977 | Plymouth | Volare | Custom |
| 1976-1977 | Plymouth | Volare | Premier |
| 1976 | Plymouth | Volare | Road Runner |
The PRO-TRUCK Sport Shock is the perfect solution for those looking for a straightforward, reliable damper setup that gains ground clearance, ride comfort and additional travel without requiring any additional suspension components. For optimal performance, PRO-TRUCK Sport Shocks are designed to be used in conjunction with Eibach PRO-LIFT-KIT springs.
Installation Instructions- Performance Shock Absorber - Precision Engineered for Street and Off-Road Performance.
- Monotube-High Pressure Design, Heavy Duty 46mm Piston, Nitro Coated Shaft.
- Precision Engineered for Street and Off-Road Performance
- Durable Zinc Coated and Weather Resistant Shock Bodies
- Durable, Zinc Coated, Weather Resistant Shock Bodies.
- Can accommodate Lifted Suspensions 0-2".
- Monotube-High Pressure Design
- Heavy Duty 46mm Piston
- Nitro Coated Shaft
- Made in U.S.A.
- Made in USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2014 | Ford | F-150 | FX4 |
| 2014-2020 | Ford | F-150 | King Ranch |
| 2014-2020 | Ford | F-150 | Lariat |
| 2014,2016-2020 | Ford | F-150 | Limited |
| 2014-2020 | Ford | F-150 | Platinum |
| 2018-2020 | Ford | F-150 | Police Responder |
| 2017-2020 | Ford | F-150 | Raptor |
| 2016-2020 | Ford | F-150 | SSV |
| 2014 | Ford | F-150 | STX |
| 2014 | Ford | F-150 | SVT Raptor |
| 2014-2020 | Ford | F-150 | XL |
| 2014-2020 | Ford | F-150 | XLT |
The PRO-TRUCK Sport Shock is the perfect solution for those looking for a straightforward, reliable damper setup that gains ground clearance, ride comfort and additional travel without requiring any additional suspension components. For optimal performance, PRO-TRUCK Sport Shocks are designed to be used in conjunction with Eibach PRO-LIFT-KIT springs.
Installation Instructions- Performance Shock Absorber - Precision Engineered for Street and Off-Road Performance.
- Monotube-High Pressure Design, Heavy Duty 46mm Piston, Nitro Coated Shaft.
- Adjustable Spring Perch Design for Lifting/Leveling front of vehicle.
- Precision Engineered for Street and Off-Road Performance
- Durable Zinc Coated and Weather Resistant Shock Bodies
- Durable, Zinc Coated, Weather Resistant Shock Bodies.
- Monotube-High Pressure Design
- Heavy Duty 46mm Piston
- Nitro Coated Shaft
- Made in U.S.A.
- Made in USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | F-150 | King Ranch |
| 2021-2025 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2025 | Ford | F-150 | Platinum |
| 2021-2025 | Ford | F-150 | Police Responder |
| 2021-2025 | Ford | F-150 | Raptor |
| 2021-2025 | Ford | F-150 | SSV |
| 2024-2025 | Ford | F-150 | STX |
| 2021-2025 | Ford | F-150 | Tremor |
| 2021-2025 | Ford | F-150 | XL |
| 2021-2025 | Ford | F-150 | XLT |
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2025 | Ford | F-150 | King Ranch |
| 2015-2025 | Ford | F-150 | Lariat |
| 2016-2023 | Ford | F-150 | Limited |
| 2015-2025 | Ford | F-150 | Platinum |
| 2018-2025 | Ford | F-150 | Police Responder |
| 2017-2025 | Ford | F-150 | Raptor |
| 2016-2025 | Ford | F-150 | SSV |
| 2024-2025 | Ford | F-150 | STX |
| 2021-2025 | Ford | F-150 | Tremor |
| 2015-2025 | Ford | F-150 | XL |
| 2015-2025 | Ford | F-150 | XLT |
King OEM performance kit custom tuned to provide your Ford with unparalleled levels of performance and ride quality. Each kit has been subjected to punishing real world testing to develop the optimal damping curve and spring rate for your vehicle. Easy bolt-on installation for stock height or custom kits for trucks running lifted aftermarket suspensions.
- External Reservoirs Increase Fluid Capacity; Heat Dissipation And Provide Sustained Damping Performance
- Optional Wide Range Compression Adjuster That Gives 20 Precise Clicks Of Compression Damping Adjustment
- Built From The Same Quality Materials And To The Same Precise Tolerances Pure Race Series Shocks
- Dynamometer Lab And Punishing Testing To Develop The Optimal Damping Curves For Your F150
- Large 2.5 in. Shock Bodies Increase Fluid Capacity For Smoother; Cooler Running Shocks
- Fully Rebuildable; Serviceable And Tunable
- Factory Tuned For Optimal Ride Quality
- 100 Percent Bolt-On Performance
- Increased Wheel Travel
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2025 | Ford | F-150 | King Ranch |
| 2015-2025 | Ford | F-150 | Lariat |
| 2016-2023 | Ford | F-150 | Limited |
| 2015-2025 | Ford | F-150 | Platinum |
| 2018-2025 | Ford | F-150 | Police Responder |
| 2023-2025 | Ford | F-150 | Raptor |
| 2016-2025 | Ford | F-150 | SSV |
| 2024-2025 | Ford | F-150 | STX |
| 2021-2025 | Ford | F-150 | Tremor |
| 2015-2025 | Ford | F-150 | XL |
| 2015-2025 | Ford | F-150 | XLT |
King OEM performance kit custom tuned to provide your Ford with unparalleled levels of performance and ride quality. Each kit has been subjected to punishing real world testing to develop the optimal damping curve and spring rate for your vehicle. Easy bolt-on installation for stock height or custom kits for trucks running lifted aftermarket suspensions.
- External Reservoirs Increase Fluid Capacity; Heat Dissipation And Provide Sustained Damping Performance
- Optional Wide Range Compression Adjuster That Gives 20 Precise Clicks Of Compression Damping Adjustment
- Built From The Same Quality Materials And To The Same Precise Tolerances Pure Race Series Shocks
- Dynamometer Lab And Punishing Testing To Develop The Optimal Damping Curves For Your F150
- Large 2.5 in. Shock Bodies Increase Fluid Capacity For Smoother; Cooler Running Shocks
- Fully Rebuildable; Serviceable And Tunable
- Factory Tuned For Optimal Ride Quality
- 100 Percent Bolt-On Performance
- Increased Wheel Travel
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2025 | Ford | F-150 | King Ranch |
| 2015-2025 | Ford | F-150 | Lariat |
| 2016-2023 | Ford | F-150 | Limited |
| 2015-2025 | Ford | F-150 | Platinum |
| 2018-2025 | Ford | F-150 | Police Responder |
| 2023-2025 | Ford | F-150 | Raptor |
| 2016-2025 | Ford | F-150 | SSV |
| 2024-2025 | Ford | F-150 | STX |
| 2021-2025 | Ford | F-150 | Tremor |
| 2015-2025 | Ford | F-150 | XL |
| 2015-2025 | Ford | F-150 | XLT |
The ICON Stage 3 Suspension System, part number K93053, is a complete suspension upgrade built for the 2010-2014 Ford F-150 SVT Raptor. ICON states that the system combines its Ford Raptor 3.0 Performance Shock System and hydraulic bump stop system with fully adjustable Billet Delta Joint upper control arms, so the front, rear and frame-mounted bump control are all upgraded in one kit.
Front 3.0 coil-over shocks. ICON describes the front shock as a true 3 inch main piston design with digressive rebound and flutter stack compression, plus an added internal hydraulic system that builds the high forces needed in the last 40% of travel. The coil-overs have an external compression adjuster and use ICON-engineered Eibach chrome silicon springs.
Rear 3.0 Zeta bypass shocks. The rear shocks are 3 inch, three tube external bypass shocks with piggyback reservoirs. ICON lists tool-free detented adjustment knobs, dampened valve stops that avoid the clicking noise of some bypass shocks, and replaceable bypass tubes that can be swapped during a rebuild if one is dented.
Hydraulic bump stop system. Instead of the factory foam rear bump stop, ICON's system uses oil and nitrogen so the bump stop acts as both a spring and a shock. It has a 2.5 inch travel air bump, and ICON says its clamshell bracket with triangulated cross braces supports a frame area known to be prone to failure. ICON also lists a cross member and tension rods that stabilize the frame rails.
Billet Delta Joint upper control arms. The arms use ICON's patented Delta Joint, a greaseable, zinc-plated, high-angle joint with a grease seal. ICON says the on-vehicle adjustable rod ends let you set alignment by loosening the pinch bolts, so the arms do not have to come off to adjust, and the factory track width is retained while tire-to-fender clearance improves.
Features
- 3.0 OEM replacement remote reservoir, compression adjustable front coil-over shocks
- 3.0 OEM replacement piggyback reservoir Zeta 3 tube bypass rear shocks
- Hydraulic bump stop system with a 2.5 inch travel air bump and billet cross beam
- Billet Delta Joint upper control arms with on-vehicle adjustable rod ends
- Nitrogen charged 6063-T832 aluminum 10 inch remote reservoirs, CNC honed and hard anodized
- Oversized 1 inch CNC machined shock shafts, with UHMW shaft and rod end shin guards standard with every kit
- Direct bolt-in to OEM locations, and installation without removing the truck bed
- Pre-tuned and nitrogen charged for most Ford Raptors
Fitment: ICON lists this kit for the 2010-2014 Ford SVT Raptor. Fitment confirmed against ICON's published product information.
Guides & Manuals
Installation InstructionsInstallation Instructions
Installation Instructions
Installation Instructions
Installation Instructions
Installation Instructions
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
The ICON Stage 2 Suspension System (part number K93052) is a complete shock and bump stop package built for the 2010-2014 Ford F-150 SVT Raptor. It pairs ICON's 3.0 remote reservoir front coilovers with 3.0 Zeta three-tube bypass rear shocks and a hydraulic bump stop system, so the truck keeps a comfortable street ride while gaining far more control when it is driven hard off-road.
Front coilovers that stay controlled through the whole stroke. The front shocks are 3.0 OEM-replacement remote reservoir, compression-adjustable coilovers. ICON describes a true 3 inch main piston with an added internal hydraulic zone that builds the force needed in the last 40% of travel, which is where bottoming control matters most. A compression adjuster lets you fine tune the feel for the terrain you are driving.
Rear bypass shocks you can tune without tools. The rear Zeta shocks are 3.0 inch, three-tube external bypass designs with piggyback reservoirs. ICON equips the bypass valves with dampened valve stops, so you do not get the clicking noise common to other bypass shocks. Detented adjustment knobs change rebound and compression by hand, and the bypass tubes are replaceable if one is ever dented or damaged.
A hydraulic bump stop system for the rear. The factory foam bump stop can only absorb so much energy, and the frame around its mount is not built for repeated hard hits. ICON's hydro-pneumatic bump stop uses oil and nitrogen to act as both a spring and a shock. It has a 2.5 inch travel air bump, is velocity sensitive so it absorbs more energy the faster it is hit, and helps reduce rear-end kick. Clamshell brackets with triangulated cross braces give it a rigid mount and reinforce a known weak area of the frame.
Kit contents, as ICON lists them. The system includes the front 3.0 coil over shocks, the rear 3.0 Zeta bypass shocks, the hydraulic bump stop system with clamshell brackets, a 6061 billet cross bar and tension rods, and UHMW shaft and rod end protective shin guards.
Features
- 3.0 OEM replacement remote reservoir, compression adjustable front coil over shocks
- 3.0 Zeta piggyback reservoir, three-tube bypass rear shocks
- Eibach 3 5/8 inch ID chrome silicon steel springs engineered by ICON
- Nitrogen charged 6063-T832 aluminum 10 inch remote reservoirs, CNC honed and hard anodized
- Oversized 1 inch heavy duty CNC machined shock shafts
- Dampened valve stops for quiet bypass operation
- High flow CNC machined welded bypass blocks and replaceable bypass tubes
- Adjustable ride height from 1 to 3 inches of lift
- Velocity sensitive hydraulic bump stop with a 2.5 inch travel air bump
- Clamshell brackets, billet cross bar and tension rods that stiffen the frame rails
- Direct bolt-in to OEM locations; installs without removing the truck bed
- Multi stage cad plated finish with polished and anodized top caps and rod ends
Fitment: ICON lists this system for the 2010-2014 Ford SVT Raptor. Fitment confirmed against ICON's published product page.
Guides & Manuals
Installation InstructionsInstallation Instructions
Installation Instructions
Installation Instructions
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
The ICON Stage 1 Suspension System (part number K93051) is a complete shock package for the 2010-2014 Ford F-150 SVT Raptor. It replaces the factory shocks with ICON's 3.0 Performance Shock System: remote reservoir, compression adjustable coil-over shocks in front and 3.0 Zeta three-tube bypass shocks in the rear. ICON developed the system through months of on-road and off-road testing on the SVT Raptor.
Front coil-overs built for control. ICON says the 3.0 front coil-over starts with a true 3 inch main piston with digressive rebound and a flutter stack compression, rather than bypassing a small internal piston. An extra internal hydraulic system works much like an external hydraulic bump stop, building the force needed over the last 40% of travel for bottom-out control.
Adjust the ride to your taste. Each front shock has an external Easy to Adjust compression damping control valve that works through the entire stroke, with 10 high-resolution settings that range from soft to firm.
Rear bypass shocks you can tune and repair. The rear Zeta shocks are a true 3.0 inch, three-tube external bypass design with piggyback reservoirs. ICON states the bypass valves have dampened valve stops for quiet operation, tool-free adjustment knobs, and replaceable bypass tubes that can be swapped during a rebuild if one is damaged.
Direct bolt-in, with adjustable ride height. ICON states the shocks bolt into the OEM locations and lists an adjustable ride height of 1 to 3 inches of lift.
What ICON lists in this kit:
- 3.0 OEM replacement remote reservoir, compression adjustable front coil-over shocks
- 3.0 OEM replacement piggyback reservoir Zeta 3-tube bypass rear shocks
- ICON-engineered Eibach 3 5/8 inch ID chrome silicon steel springs
- UHMW machined shaft and rod end protective shin guards, standard with every kit
Features
- Oversized 1 inch heavy duty CNC machined shock shafts
- Internal hydraulic bump zone for maximum bottom-out control in the last 40% of travel
- Nitrogen charged 6063-T832 aluminum 10 inch remote reservoirs, precision CNC honed and hard anodized
- Easy-to-adjust high-resolution compression adjuster with 10 settings
- High-flow CNC machined welded bypass blocks for increased fluid flow
- High-resolution bypass valves for fine rebound and compression tuning
- Dampened valve stops for quiet operation, without the bypass clicking noise ICON notes on other brands
- Replaceable bypass tubes that slide into position
- Detented adjustment knobs that need no tools
- Com 12 PTFE-lined bearings for strength and durability
- Multi-stage cad plated finish with polished and anodized top caps and rod ends
- Extended droop travel and improved on-road and off-road performance
Emissions. Prop 65: this product contains chemicals known to the State of California to cause cancer, birth anomalies, or other reproductive harm.
Fitment: ICON lists this system for the 2010-2014 Ford SVT Raptor. Fitment confirmed against ICON Vehicle Dynamics' published product page.
Guides & Manuals
Installation InstructionsInstallation Instructions
Installation Instructions
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
The ICON 95200 is a pair of rear 3.0 Zeta piggyback reservoir shocks built for the 2010-2014 Ford F-150 SVT Raptor. They are a true 3.0 inch (inside and out), three-tube external bypass design that bolts in at the factory rear shock location, giving first-generation Raptor owners race-style damping with street manners.
Three-tube external bypass construction. Each bypass valve has its own port design and its own spring rate, so every zone of shock travel is controlled separately. This is a different approach from the traditional bypass shocks seen on trophy trucks and other off-road race vehicles.
Quiet, precise valving. The bypass valves use dampened valve stops, which ICON says removes the clicking noise common to other bypass shocks on bumps and road chatter.
Tool-free tuning. The high-resolution clicker knobs adjust without tools, so you can move from a plush off-road setting to a firmer on-road setting for mountain driving or towing in seconds.
Replaceable bypass tubes. If a tube is dented or damaged, it can be swapped out during a standard rebuild instead of replacing the whole shock body, which ICON says saves hundreds of dollars.
Features
- True 3.0 inch three-tube external bypass Zeta design with piggyback reservoir
- Dampened valve stops for quiet, precise operation without bypass clicking
- High-flow CNC machined welded bypass blocks for increased fluid flow and fine tuning
- High-resolution bypass valves for noticeable rebound and compression adjustment
- Direct bolt-in at the OEM location with easily reached adjustment knobs
- Easy-to-adjust detented knobs, no tools needed
- Replaceable bypass tubes that slide into position
- UHMW machined shaft and rod end protective shin guards included with every kit
- Multi-stage cad plated finish with polished and anodized top cap and rod ends
Fitment: ICON lists this shock for the 2010-2014 Ford SVT Raptor. Fitment confirmed against ICON's published product listing.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
$3,599.95
This is a pair of FOX 3.0 Factory Series rear shocks built for the 2010-2014 Ford F-150 SVT Raptor (part number 883-09-241). Each shock pairs a large external reservoir with adjustable bypass tuning, so you can firm up or soften the rear of the truck to match the terrain you are driving.
Built to use the whole wheel travel. FOX describes its Factory 3.0 external bypass shocks as position-sensitive, meaning the damping changes as the shock moves through its stroke. FOX says this design adds oil capacity and about 60% more damping area than the stock FOX SVT shocks.
Tunable bypass zones. FOX developed this shock family with three independently tunable bypass zones, so you can keep a plush, predictable ride on normal trails and still ramp up damping force for harder, faster driving. The orange adjuster knobs sit on the bypass tubes where you can reach them.
Cooler running with a remote reservoir. A large 2.5 inch remote reservoir adds cooling capacity, which helps the shock hold consistent damping during long, rough runs.
Race-bred construction. FOX says these shocks use the same core components as its Trophy Truck shocks: steel shock shafts, PTFE-lined spherical bearings, proprietary racing oil and high-temperature Viton seals. They are designed to bolt onto the factory mounts, and FOX suggests pairing them with aftermarket leaf springs and bump stop kits to get the most from the SVT Raptor.
Features
- Rear shock set for the 2010-2014 Ford F-150 SVT Raptor
- External bypass design with independently tunable bypass zones
- Large 2.5 inch remote reservoir for added cooling
- Position-sensitive damping across the full wheel travel
- Steel shafts, PTFE-lined spherical bearings and Viton seals
- Bolts onto the factory mounts
Fitment: FOX lists this part for the Ford F-150 SVT Raptor, model years 2010 through 2014, rear position. Fitment confirmed against FOX's published application list.
Guides & Manuals
Installation InstructionsTechnical Drawing
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
$3,799.95
The FOX Factory Race Series 2.5 Live Valve Internal Bypass rear coilover (part 883-06-246) is a bolt-on rear suspension upgrade for the 2024-2026 Ford Ranger Raptor. It keeps the truck's Live Valve electronics in the loop, so the damping is still adjusted for you as the terrain changes, while adding the oil capacity and internal bypass tuning that FOX builds into its race-bred shocks.
Semi-active damping that works with the truck. FOX designed this coilover to plug into the factory electronics, so there is no separate controller to add. Live Valve reads the position of the shock and changes damping force on the fly for a calmer ride on pavement and more control when the pace picks up.
Internal bypass for progressive control. In the middle of the stroke, fluid slips past the main piston through bleed holes, which keeps the ride comfortable. Once the shock travels beyond that ride zone in compression or rebound, the bleed holes close off and fluid is forced through the piston, building force progressively. That helps manage hard bottom-outs, softens harsh top-outs and gives the truck a catch when it lands from a jump.
Built to take heat and pressure. The 2.5-inch aluminum bodies are Type II anodized, which stands up to higher shock pressures and resists corrosion. Finned reservoirs add oil capacity, and an internal floating piston (IFP) inside each reservoir helps prevent cavitation during hard use.
Adjustable ride height. A threaded preload collar lets you fine-tune the ride height to suit your setup. The listing for this part is sold as a 0-1in lift rear coilover.
Features
- FOX Factory Race Series 2.5 Live Valve Internal Bypass design
- Rear coilover for the Ford Ranger Raptor
- Semi-active, position-sensitive damping
- Plug-and-play integration with OEM electronics
- Multiple zones of damping control from the internal bypass
- Type II anodized 2.5-inch aluminum body
- Finned reservoir with IFP to prevent cavitation
- Threaded preload collar for ride height adjustment
Fitment: Ford Ranger Raptor, model years 2024-2026, rear position. Fitment confirmed against FOX's published application list.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$3,999.95
The FOX Factory Race Series 3.2 Live Valve Internal Bypass front coilover (part number 883-06-245) is a bolt-on suspension upgrade for the 2024-2026 Ford Ranger Raptor. It pairs semi-active Live Valve control with FOX's internal bypass damping, so the truck stays composed on pavement and keeps control when the terrain gets rough. The Shopify listing for this part also describes it as a 2-3in lift setup.
Semi-active damping that works with your truck. Live Valve is position-sensitive, adjusting damping on the fly, and the kit plugs into the factory electronics so there is no separate controller to wire up.
Internal bypass for multiple damping zones. Fluid flows past the main piston through bleed holes while the shock is in its ride zone. Once travel moves beyond that zone in compression or rebound, the bleed holes close and fluid is forced through the main piston. The result is a soft, comfortable ride in normal use and progressively more force near the ends of travel, which helps with hard bottom-outs, harsh top-outs and landings.
Built to resist heat, pressure and corrosion. The 3.2-inch aluminum bodies have Type II anodizing to handle higher internal pressure and fend off corrosion. Finned reservoirs add oil capacity and contain an IFP (internal floating piston) to prevent cavitation.
Adjustable ride height. A threaded preload collar lets you fine-tune the stance of your Ranger Raptor.
Features
- FOX Factory Race Series 3.2 Live Valve shocks with Internal Bypass
- Front coilover application
- Semi-active, position-sensitive damping
- Plug-and-play integration with OEM electronics
- Type II anodized 3.2-inch aluminum bodies
- Finned reservoirs with IFP
- Threaded preload collar for ride height adjustment
Fitment: Fits the 2024-2026 Ford Ranger Raptor. Fitment confirmed against FOX's published application list.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
A differential skid plate tie the two crossmembers together to create a rigid sub-frame and added protection for vital steering and driveline components. Retain your front Ford OEM tuned performance struts by utilizing top mounted strut spacers. Precise engineered 1-piece strut spacers have a specific ‘Pitch and Index' offset to preserve CV extension and to prevent CV axle overextension within the OEM tolerances. Front and rear brake line relocation brackets, differential vent tube extension, a CNC machined 6061-T6 aluminum front driveshaft spacer, rear driveshaft carrier bearing lowering bracket, cast ductile iron rear blocks with longer U-bolts and lock nuts. Shocks are a key link in-between the chassis and the moving parts of your suspension. Skyjackers ADX M2.0 Adventure Series Aluminum Monotube Rear Shocks deliver modern technology in the design with an innovative off-road race-inspired full-displaced valving system.
- ADX M2.0 Nitrogen Charged / Internal Floating Piston Technology
- Diff Brackets Plus Driveshaft Spacer Correct Driveshaft Angle
- 1-Piece Strut Spacers Have A Specific Pitch And Index Offset
- ADX M2.0 Aluminum Monotube Provides Better Heat Dissipation
- Three Separate Diff Brackets Reposition Correct CV Angles
- IFP Technology Provides Quickest Shock Reaction Time Ever
- Works with Electric Power Assisted Steering [EPAS] System
- ADX M2.0 Has Race-Inspired Full-Displaced Valving System
- ADX M2.0 Reacts Quicker To Improve Control And Stability
- Rear Block And U-bolt Kit Delivers A More Level Stance
- Prevents CV Axle Overextension Within OEM Tolerances
- Skid Plate Equals Rigid Sub-Frame
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | F-150 | King Ranch |
| 2021-2025 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2025 | Ford | F-150 | Platinum |
| 2021-2025 | Ford | F-150 | Police Responder |
| 2023-2025 | Ford | F-150 | Raptor |
| 2021-2025 | Ford | F-150 | SSV |
| 2024-2025 | Ford | F-150 | STX |
| 2021-2025 | Ford | F-150 | Tremor |
| 2021-2025 | Ford | F-150 | XL |
| 2021-2025 | Ford | F-150 | XLT |
A differential skid plate tie the two crossmembers together to create a rigid sub-frame and added protection for vital steering and driveline components. Retain your front Ford OEM tuned performance struts by utilizing top mounted strut spacers. Precise engineered 1-piece strut spacers have a specific ‘Pitch and Index' offset to preserve CV extension and to prevent CV axle overextension within the OEM tolerances. Front and rear brake line relocation brackets, differential vent tube extension, a CNC machined 6061-T6 aluminum front driveshaft spacer, rear driveshaft carrier bearing lowering bracket, cast ductile iron rear blocks with longer U-bolts and lock nuts. Shocks are a key link in-between the chassis and the moving parts of your suspension. Skyjackers ADX M2.0 Adventure Series Aluminum Monotube Rear Shocks deliver modern technology in the design with an innovative off-road race-inspired full-displaced valving system.
- ADX M2.0 Nitrogen Charged / Internal Floating Piston Technology
- Diff Brackets Plus Driveshaft Spacer Correct Driveshaft Angle
- 1-Piece Strut Spacers Have A Specific Pitch And Index Offset
- ADX M2.0 Aluminum Monotube Provides Better Heat Dissipation
- Three Separate Diff Brackets Reposition / Correct CV Angles
- IFP Technology Provides Quickest Shock Reaction Time Ever
- Works with Electric Power Assisted Steering [EPAS] System
- ADX M2.0 Has Race-Inspired Full-Displaced Valving System
- ADX M2.0 Reacts Quicker To Improve Control And Stability
- Rear Block And U-bolt Kit Delivers A More Level Stance
- Prevents CV Axle Overextension Within OEM Tolerances
- Skid Plate Equals Rigid Sub-Frame
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | F-150 | King Ranch |
| 2021-2025 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2025 | Ford | F-150 | Platinum |
| 2021-2025 | Ford | F-150 | Police Responder |
| 2023-2025 | Ford | F-150 | Raptor |
| 2021-2025 | Ford | F-150 | SSV |
| 2024-2025 | Ford | F-150 | STX |
| 2021-2025 | Ford | F-150 | Tremor |
| 2021-2025 | Ford | F-150 | XL |
| 2021-2025 | Ford | F-150 | XLT |
Skyjacker's ADX 2.0 Adventure Series Remote Reservoir Aluminum Monotube Shocks deliver modern technology in the design with an innovative off-road race-inspired full-displaced valving system. With this highest level of technology development, ADX 2.0 provides consistent dampening, high-end performance, cooler running, more control and improved driving comfort. Skyjacker's ADX 2.0 shocks dampen out (control) the unwanted oscillation motion to improve handling and ride quality. ADX 2.0 will optimize your suspension by keeping your tires in contact with the terrain. Engineered for higher speed applications, remote reservoir shocks still perform at crawl. Truthfully, we actually spend way more time on our daily commutes than we spend on the trails. The commutes are neither smooth surfaces or free of obstacles. Quick starts, up and down acceleration and hard stops are a daily routine. The separate reservoir allows more room in the shock cylinder to increase the oil capacity. The large bore size design reacts quicker and creates the smoothest ride possible. The Teflon banded piston's smooth reaction delivers a superior ride and adds stability on any terrain. Impact extruded CNC machined T6061-T6 aluminum monotube dissipates heat and runs cooler versus traditional steel-bodied shocks. The overall weight of the aluminum body and aluminum remote reservoir setup is lighter too.
- ADX 2.0 Has A Unique Clear Anodize Polished Aluminum Finish
- ADX 2.0 Aluminum Monotube Provides Better Heat Dissipation
- Full Displaced Valve System Inspired From Off-Road Racing
- High Pressure Nitrogen Gas And IFP Technology Performance
- ADX 2.0 Reacts Quicker To Improve Handling And Stability
- Cooler Running More Control And Improved Driving Comfort
- Impact Extruded CNC Machined T6061-T6 Aluminum Monotube
- Large 53.5mm OD Aluminum Body With 46mm ID Bore Size
- ADX 2.0 Constant Controlled Resistance Performance
- Factory Set Vehicle Specific Consistent Dampening
- ADX 2.0 Smooth Reaction Teflon Banded Piston
- Quality Assured 2 Year Warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2007-2008,2010-2014 | Ford | F-150 | FX2 |
| 2004-2014 | Ford | F-150 | FX4 |
| 2006-2008,2010-2012 | Ford | F-150 | Harley-Davidson Edition |
| 2005-2022 | Ford | F-150 | King Ranch |
| 2004-2022 | Ford | F-150 | Lariat |
| 2011 | Ford | F-150 | Lariat Limited |
| 2008,2013-2014,2016-2022 | Ford | F-150 | Limited |
| 2009-2022 | Ford | F-150 | Platinum |
| 2018-2022 | Ford | F-150 | Police Responder |
| 2022 | Ford | F-150 | Raptor |
| 2016-2022 | Ford | F-150 | SSV |
| 2004-2014 | Ford | F-150 | STX |
| 2008 | Ford | F-150 | THE 60TH ANNIVERSARY EDITION |
| 2021-2022 | Ford | F-150 | Tremor |
| 2004-2022 | Ford | F-150 | XL |
| 2004-2022 | Ford | F-150 | XLT |
| 1986,1997 | Ford | F-250 | Base |
| 1987-1992 | Ford | F-250 | Custom |
| 1995-1996 | Ford | F-250 | Eddie Bauer |
| 1997 | Ford | F-250 | Lariat |
| 1995-1996 | Ford | F-250 | Special |
| 1986-1997 | Ford | F-250 | XL |
| 1993-1997 | Ford | F-250 | XLT |
| 1986-1992 | Ford | F-250 | XLT Lariat |
| 2009-2010 | Ford | F-250 Super Duty | Cabela's |
| 2008-2009 | Ford | F-250 Super Duty | FX4 |
| 2004-2010 | Ford | F-250 Super Duty | Harley-Davidson Edition |
| 2004-2016 | Ford | F-250 Super Duty | King Ranch |
| 1999-2016 | Ford | F-250 Super Duty | Lariat |
| 2013-2016 | Ford | F-250 Super Duty | Platinum |
| 1999-2016 | Ford | F-250 Super Duty | XL |
| 1999-2016 | Ford | F-250 Super Duty | XLT |
| 1986,1997 | Ford | F-350 | Base |
| 1987-1992 | Ford | F-350 | Custom |
| 1995 | Ford | F-350 | Eddie Bauer |
| 1995-1996 | Ford | F-350 | Special |
| 1986-1997 | Ford | F-350 | XL |
| 1993-1997 | Ford | F-350 | XLT |
| 1986-1992 | Ford | F-350 | XLT Lariat |
| 2009-2010 | Ford | F-350 Super Duty | Cabela's |
| 2008-2009 | Ford | F-350 Super Duty | FX4 |
| 2004-2010 | Ford | F-350 Super Duty | Harley-Davidson Edition |
| 2003-2016 | Ford | F-350 Super Duty | King Ranch |
| 1999-2016 | Ford | F-350 Super Duty | Lariat |
| 2013-2016 | Ford | F-350 Super Duty | Platinum |
| 1999-2016 | Ford | F-350 Super Duty | XL |
| 1999-2016 | Ford | F-350 Super Duty | XLT |
| 2019-2022 | Ford | Ranger | Lariat |
| 2019-2022 | Ford | Ranger | XL |
| 2019-2022 | Ford | Ranger | XLT |
$120.00
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2026 | Ford | F-150 | King Ranch |
| 2015-2026 | Ford | F-150 | Lariat |
| 2016-2023 | Ford | F-150 | Limited |
| 2015-2026 | Ford | F-150 | Platinum |
| 2018-2026 | Ford | F-150 | Police Responder |
| 2017-2026 | Ford | F-150 | Raptor |
| 2016-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2015-2026 | Ford | F-150 | XL |
| 2015-2026 | Ford | F-150 | XLT |
$195.00
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2026 | Ford | F-150 | King Ranch |
| 2015-2026 | Ford | F-150 | Lariat |
| 2016-2023 | Ford | F-150 | Limited |
| 2015-2026 | Ford | F-150 | Platinum |
| 2018-2026 | Ford | F-150 | Police Responder |
| 2017-2026 | Ford | F-150 | Raptor |
| 2016-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2015-2026 | Ford | F-150 | XL |
| 2015-2026 | Ford | F-150 | XLT |
$285.00
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2026 | Ford | F-150 | King Ranch |
| 2015-2026 | Ford | F-150 | Lariat |
| 2016-2023 | Ford | F-150 | Limited |
| 2015-2026 | Ford | F-150 | Platinum |
| 2018-2026 | Ford | F-150 | Police Responder |
| 2017-2026 | Ford | F-150 | Raptor |
| 2016-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2015-2026 | Ford | F-150 | XL |
| 2015-2026 | Ford | F-150 | XLT |
$305.00
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2026 | Ford | F-150 | King Ranch |
| 2015-2026 | Ford | F-150 | Lariat |
| 2016-2023 | Ford | F-150 | Limited |
| 2015-2026 | Ford | F-150 | Platinum |
| 2018-2026 | Ford | F-150 | Police Responder |
| 2017-2026 | Ford | F-150 | Raptor |
| 2016-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2015-2026 | Ford | F-150 | XL |
| 2015-2026 | Ford | F-150 | XLT |
$640.00
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2026 | Ford | F-150 | King Ranch |
| 2015-2026 | Ford | F-150 | Lariat |
| 2016-2023 | Ford | F-150 | Limited |
| 2015-2026 | Ford | F-150 | Platinum |
| 2018-2026 | Ford | F-150 | Police Responder |
| 2017-2026 | Ford | F-150 | Raptor |
| 2016-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2015-2026 | Ford | F-150 | XL |
| 2015-2026 | Ford | F-150 | XLT |
Lowered F-150s with added power often fight wheel hop and traction issues. QA1’s traction bar system is engineered to control axle movement while maintaining ride quality and everyday drivability. Designed for street-driven performance trucks, it delivers the grip and stability owners want without harshness, excessive noise, or reduced ground clearance. ELIMINATE WHEEL HOP WITHOUT SACRIFICING STREET COMFORT QA1 traction bars are engineered to reduce wheel hop and improve acceleration stability while still allowing proper suspension articulation. Built-in adjusters let you fine tune preload and performance feel so you can dial in traction for your truck’s power level, tire setup, and stance. Unlike systems that create bind or increase noise, this design focuses on controlled movement. The result is improved launch consistency with street-friendly behavior that works for daily driving and performance use alike. BOLT-IN CONVENIENCE Designed as a complete, integrated system, this kit avoids the typical add-on stacking approach common in the market. A redesigned front leaf spring hanger integrates the rocker mount, while the rear uses a new upper axle saddle design that eliminates the need for additional U-bolts or bulky brackets. The over-the-leaf layout keeps the system tucked up and out of the way, preserving valuable ground clearance for lowered trucks. Installation is straightforward with included hardware and a layout designed to minimize extra drilling or rework.
- Integrated front leaf spring hanger with rocker mount for cleaner packaging
- Upper axle saddle attachment eliminates extra U-bolts and bulky hardware
- Designed for smooth articulation to reduce bind through suspension travel
- Compatible with QA1 lowering kit ecosystem for seamless upgrades
- Street-friendly operation aimed at minimizing noise and vibration
- Helps reduce wheel hop and tire chatter under hard acceleration
- Complete solution with required mounting components included
- Built-in adjusters for tuning ride and traction balance
- Clean, tucked appearance that looks factory-integrated
- Over-the-leaf design helps maintain ground clearance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2026 | Ford | F-150 | King Ranch |
| 2015-2026 | Ford | F-150 | Lariat |
| 2016-2023 | Ford | F-150 | Limited |
| 2015-2026 | Ford | F-150 | Platinum |
| 2018-2026 | Ford | F-150 | Police Responder |
| 2017-2026 | Ford | F-150 | Raptor |
| 2016-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2015-2026 | Ford | F-150 | XL |
| 2015-2026 | Ford | F-150 | XLT |
$54.95
Zone Nitro Series shock absorber offers stock-like control and performance with fully displaced valving for improved compression and extension travel. This vehicle specific valving is pressurized with 50 psi nitrogen gas; this gas charge ensures split second response and reduced aeration. Combine these features with the special Fluon-banded piston and this shock is built to perform! Shock absorbers are sold individually and include bushings/sleeves.
Installation Instructions- Twin tube, nitrogen charged design with 10-stage velocity sensitive valving for great on/off-road performance
- Steel alloy body with dual welded ends and a 14mm heavy chromed shock shaft
- Bushings and sleeves included for easy, direct replacement installation
- Shock absorbers are sold individually
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2007-2008,2010-2014 | Ford | F-150 | FX2 |
| 2004-2014 | Ford | F-150 | FX4 |
| 2006-2008,2010-2012 | Ford | F-150 | Harley-Davidson Edition |
| 2005-2024 | Ford | F-150 | King Ranch |
| 2004-2024 | Ford | F-150 | Lariat |
| 2011 | Ford | F-150 | Lariat Limited |
| 2008,2013-2014,2016-2023 | Ford | F-150 | Limited |
| 2009-2024 | Ford | F-150 | Platinum |
| 2018-2024 | Ford | F-150 | Police Responder |
| 2017-2024 | Ford | F-150 | Raptor |
| 2016-2024 | Ford | F-150 | SSV |
| 2004-2014,2024 | Ford | F-150 | STX |
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2008 | Ford | F-150 | THE 60TH ANNIVERSARY EDITION |
| 2021-2024 | Ford | F-150 | Tremor |
| 2004-2024 | Ford | F-150 | XL |
| 2004-2024 | Ford | F-150 | XLT |
| 2009-2010 | Ford | F-250 Super Duty | Cabela's |
| 2008-2009 | Ford | F-250 Super Duty | FX4 |
| 2004-2010 | Ford | F-250 Super Duty | Harley-Davidson Edition |
| 2004-2016 | Ford | F-250 Super Duty | King Ranch |
| 1999-2016 | Ford | F-250 Super Duty | Lariat |
| 2013-2016 | Ford | F-250 Super Duty | Platinum |
| 1999-2016 | Ford | F-250 Super Duty | XL |
| 1999-2016 | Ford | F-250 Super Duty | XLT |
| 2009-2010 | Ford | F-350 Super Duty | Cabela's |
| 2008-2009 | Ford | F-350 Super Duty | FX4 |
| 2004-2010 | Ford | F-350 Super Duty | Harley-Davidson Edition |
| 2003-2016 | Ford | F-350 Super Duty | King Ranch |
| 1999-2016 | Ford | F-350 Super Duty | Lariat |
| 2013-2016 | Ford | F-350 Super Duty | Platinum |
| 1999-2016 | Ford | F-350 Super Duty | XL |
| 1999-2016 | Ford | F-350 Super Duty | XLT |
Dirt Logic 2.25's are designed to replace factory shocks with a larger, more robust configuration. The 2.25 size is what separates it from other replacement take apart shocks for a superior ride, both on and off road. Shocks are pre tuned for each Fabtech suspension, accounting for larger tires, providing the finest all around damping.
- 7/8 in. Nitro Steel Black Piston Rod
- 2.0 in. OD Billet Aluminum Piston
- 2.25 in. OD Stainless Steel Body
- Polyurethane Mounting Ends
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2024 | Ford | F-150 | King Ranch |
| 2021-2024 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2024 | Ford | F-150 | Platinum |
| 2021-2024 | Ford | F-150 | Police Responder |
| 2023-2024 | Ford | F-150 | Raptor |
| 2021-2024 | Ford | F-150 | SSV |
| 2024 | Ford | F-150 | STX |
| 2021-2024 | Ford | F-150 | Tremor |
| 2021-2024 | Ford | F-150 | XL |
| 2021-2024 | Ford | F-150 | XLT |
Stealth is the first all black monotube shock absorber, with an identifiable raised metal nameplate, that represents the signature of quality you can rely on for a superior ride at an affordable price. Stealth monotube shocks are built with 46mm diameter high flow piston and vehicle specific valving, for a great ride with oversized tires. All Stealth shock absorbers feature Nitrocarburized piston rods that are superior to chromed rods in durability and corrosion resistance. These Nitrocarb piston rods are finished in matte black for a complete black out shock package.
- 14mm Nitrocarb Piston Rod Resists Rock Chips And Rusting
- Vehicle Specific Valving Designed For Oversized Tires
- Full Floating Piston Separates Gas From Oil
- 46mm High Flow Piston For Best Ride
- Identifiable Raised Metal Nameplate
- 50mm OD Seamless Steel Body
- All Black Finish
- Consistent Ride
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2007-2008 | Chevrolet | Silverado 2500 HD | LT |
| 2007-2008 | Chevrolet | Silverado 2500 HD | LTZ |
| 2007-2008 | Chevrolet | Silverado 2500 HD | WT |
| 2007 | Chevrolet | Silverado 2500 HD Classic | LS |
| 2007 | Chevrolet | Silverado 2500 HD Classic | LT |
| 2007 | Chevrolet | Silverado 2500 HD Classic | WT |
| 2007 | Chevrolet | Silverado 3500 Classic | LS |
| 2007 | Chevrolet | Silverado 3500 Classic | LT |
| 2007 | Chevrolet | Silverado 3500 Classic | WT |
| 2007-2008 | Chevrolet | Silverado 3500 HD | LT |
| 2007-2008 | Chevrolet | Silverado 3500 HD | LTZ |
| 2007-2008 | Chevrolet | Silverado 3500 HD | WT |
| 2003,2005-2010 | Dodge | Ram 2500 | Laramie |
| 2006-2010 | Dodge | Ram 2500 | Power Wagon |
| 2003-2010 | Dodge | Ram 2500 | SLT |
| 2006-2007 | Dodge | Ram 2500 | Sport |
| 2003-2010 | Dodge | Ram 2500 | ST |
| 2008-2010 | Dodge | Ram 2500 | SXT |
| 2010 | Dodge | Ram 2500 | TRX |
| 2006-2007 | Dodge | Ram 2500 | TRX4 |
| 2003-2010 | Dodge | Ram 3500 | Laramie |
| 2003-2010 | Dodge | Ram 3500 | SLT |
| 2006-2007 | Dodge | Ram 3500 | Sport |
| 2003-2010 | Dodge | Ram 3500 | ST |
| 2008-2009 | Dodge | Ram 3500 | SXT |
| 2007 | Dodge | Ram 3500 | TRX4 |
| 2003-2005 | Ford | Excursion | Eddie Bauer |
| 2000-2005 | Ford | Excursion | Limited |
| 2004-2005 | Ford | Excursion | XLS |
| 2000-2005 | Ford | Excursion | XLT |
| 2009-2013 | Ford | F-150 | FX4 |
| 2009-2013,2021-2024 | Ford | F-150 | King Ranch |
| 2009-2013,2021-2024 | Ford | F-150 | Lariat |
| 2011 | Ford | F-150 | Lariat Limited |
| 2013,2021-2023 | Ford | F-150 | Limited |
| 2009-2013,2021-2024 | Ford | F-150 | Platinum |
| 2021-2024 | Ford | F-150 | Police Responder |
| 2023-2024 | Ford | F-150 | Raptor |
| 2021-2024 | Ford | F-150 | SSV |
| 2009-2013,2024 | Ford | F-150 | STX |
| 2021-2024 | Ford | F-150 | Tremor |
| 2009-2013,2021-2024 | Ford | F-150 | XL |
| 2009-2013,2021-2024 | Ford | F-150 | XLT |
| 1999 | Ford | F-250 | Base |
| 1999 | Ford | F-250 | Lariat |
| 1999 | Ford | F-250 | XL |
| 1999 | Ford | F-250 | XLT |
| 2009-2010 | Ford | F-250 Super Duty | Cabela's |
| 2008-2009 | Ford | F-250 Super Duty | FX4 |
| 2004-2010 | Ford | F-250 Super Duty | Harley-Davidson Edition |
| 2004-2015,2017-2021,2023-2026 | Ford | F-250 Super Duty | King Ranch |
| 1999-2015,2017-2021,2023-2026 | Ford | F-250 Super Duty | Lariat |
| 2018-2020,2023-2024 | Ford | F-250 Super Duty | Limited |
| 2013-2015,2017-2021,2023-2026 | Ford | F-250 Super Duty | Platinum |
| 1999-2015,2017-2021,2023-2026 | Ford | F-250 Super Duty | XL |
| 1999-2015,2017-2021,2023-2026 | Ford | F-250 Super Duty | XLT |
| 2009-2010 | Ford | F-350 Super Duty | Cabela's |
| 2008-2009 | Ford | F-350 Super Duty | FX4 |
| 2004-2010 | Ford | F-350 Super Duty | Harley-Davidson Edition |
| 2003-2015,2017-2021,2023-2026 | Ford | F-350 Super Duty | King Ranch |
| 1999-2015,2017-2021,2023-2026 | Ford | F-350 Super Duty | Lariat |
| 2018-2020,2023-2024 | Ford | F-350 Super Duty | Limited |
| 2013-2015,2017-2021,2023-2026 | Ford | F-350 Super Duty | Platinum |
| 1999-2015,2017-2021,2023-2026 | Ford | F-350 Super Duty | XL |
| 1999-2015,2017-2021,2023-2026 | Ford | F-350 Super Duty | XLT |
| 2007-2008 | GMC | Sierra 2500 HD | SLE |
| 2007-2008 | GMC | Sierra 2500 HD | SLT |
| 2007-2008 | GMC | Sierra 2500 HD | WT |
| 2007 | GMC | Sierra 2500 HD Classic | SL |
| 2007 | GMC | Sierra 2500 HD Classic | SLE |
| 2007 | GMC | Sierra 2500 HD Classic | SLT |
| 2007 | GMC | Sierra 2500 HD Classic | WT |
| 2007 | GMC | Sierra 3500 Classic | SL |
| 2007 | GMC | Sierra 3500 Classic | SLE |
| 2007 | GMC | Sierra 3500 Classic | SLT |
| 2007 | GMC | Sierra 3500 Classic | WT |
| 2007-2008 | GMC | Sierra 3500 HD | SLE |
| 2007-2008 | GMC | Sierra 3500 HD | SLT |
| 2007-2008 | GMC | Sierra 3500 HD | WT |
| 2013 | Ram | 2500 | Big Horn |
| 2011-2013 | Ram | 2500 | Laramie |
| 2011-2013 | Ram | 2500 | Laramie Longhorn |
| 2013 | Ram | 2500 | Lone Star |
| 2012-2013 | Ram | 2500 | Outdoorsman |
| 2011-2013 | Ram | 2500 | Power Wagon |
| 2011-2013 | Ram | 2500 | SLT |
| 2011-2013 | Ram | 2500 | ST |
| 2013 | Ram | 2500 | Tradesman |
| 2013 | Ram | 3500 | Big Horn |
| 2011-2013 | Ram | 3500 | Laramie |
| 2011-2013 | Ram | 3500 | Laramie Longhorn |
| 2013 | Ram | 3500 | Lone Star |
| 2011-2013 | Ram | 3500 | SLT |
| 2011-2013 | Ram | 3500 | ST |
| 2013 | Ram | 3500 | Tradesman |
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2014 | Ford | F-150 | FX2 |
| 2014 | Ford | F-150 | FX4 |
| 2014-2025 | Ford | F-150 | King Ranch |
| 2014-2025 | Ford | F-150 | Lariat |
| 2014,2016-2023 | Ford | F-150 | Limited |
| 2014-2025 | Ford | F-150 | Platinum |
| 2018-2025 | Ford | F-150 | Police Responder |
| 2017-2025 | Ford | F-150 | Raptor |
| 2016-2025 | Ford | F-150 | SSV |
| 2014,2024-2025 | Ford | F-150 | STX |
| 2014 | Ford | F-150 | SVT Raptor |
| 2021-2025 | Ford | F-150 | Tremor |
| 2014-2025 | Ford | F-150 | XL |
| 2014-2025 | Ford | F-150 | XLT |
Twin Tube Gas Shock; Loop/Loop; 22.30 in. Extended; 13.40 in. Collapsed; Incl. Hardware; Two 0.4375 in. Sleeves; Must Be Installed w/Shock Shaft Towards The Top;
- Shock
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1976-1978,1983-1986,1997-2000 | Ford | F-150 | Base |
| 1975-1982,1987-1992 | Ford | F-150 | Custom |
| 1995-1996 | Ford | F-150 | Eddie Bauer |
| 2007-2008,2010-2014 | Ford | F-150 | FX2 |
| 2004-2014 | Ford | F-150 | FX4 |
| 2000-2003,2006-2008,2010-2012 | Ford | F-150 | Harley-Davidson Edition |
| 2001-2003,2005-2025 | Ford | F-150 | King Ranch |
| 1997-2025 | Ford | F-150 | Lariat |
| 2011 | Ford | F-150 | Lariat Limited |
| 1993-1995,1999-2003 | Ford | F-150 | Lightning |
| 2008,2013-2014,2016-2023 | Ford | F-150 | Limited |
| 1975-1978 | Ford | F-150 | Northland |
| 2009-2025 | Ford | F-150 | Platinum |
| 2018-2025 | Ford | F-150 | Police Responder |
| 1975-1981 | Ford | F-150 | Ranger |
| 1978-1981 | Ford | F-150 | Ranger Lariat |
| 1975-1981 | Ford | F-150 | Ranger XLT |
| 2017-2025 | Ford | F-150 | Raptor |
| 1995-1996 | Ford | F-150 | Special |
| 2016-2025 | Ford | F-150 | SSV |
| 2004-2014,2024-2025 | Ford | F-150 | STX |
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2008 | Ford | F-150 | THE 60TH ANNIVERSARY EDITION |
| 2021-2025 | Ford | F-150 | Tremor |
| 1982-2025 | Ford | F-150 | XL |
| 1982-1983 | Ford | F-150 | XLS |
| 1977,1983-1984,1993-2025 | Ford | F-150 | XLT |
| 1982,1985-1992 | Ford | F-150 | XLT Lariat |
| 2004 | Ford | F-150 Heritage | SVT Lightning |
| 2004 | Ford | F-150 Heritage | XL |
| 2004 | Ford | F-150 Heritage | XLT |
| 1983,1985-1986 | Ford | Ranger | Base |
| 1987-1992 | Ford | Ranger | Custom |
| 2001-2005 | Ford | Ranger | Edge |
| 1998-2002 | Ford | Ranger | EV |
| 2005-2009 | Ford | Ranger | FX4 |
| 1988-1989 | Ford | Ranger | GT |
| 2002 | Ford | Ranger | Postal |
| 1984,1986-1992 | Ford | Ranger | S |
| 1990 | Ford | Ranger | S Plus |
| 1993-1998 | Ford | Ranger | Splash |
| 1991-1993,1997,2006-2011 | Ford | Ranger | Sport |
| 1986-1997,2005-2007 | Ford | Ranger | STX |
| 2004 | Ford | Ranger | Tremor |
| 1983-1986,1993-2011 | Ford | Ranger | XL |
| 1995 | Ford | Ranger | XL Sport |
| 1983-1985 | Ford | Ranger | XLS |
| 1983-2011 | Ford | Ranger | XLT |
King OEM performance kit custom tuned to provide your Ford with unparalleled levels of performance and ride quality. Each kit has been subjected to punishing real world testing to develop the optimal damping curve and spring rate for your vehicle. Easy bolt-on installation for stock height or custom kits for trucks running lifted aftermarket suspensions.
- External Finned Reservoirs Increase Fluid Capacity; Heat Dissipation And Provide Sustained Damping Performance
- Built From The Same Quality Materials And To The Same Precise Tolerances Pure Race Series Shocks
- Large 3.0 Diameter Shock Bodies Increase Fluid Capacity For Smoother; Cooler Running Shocks
- Fully Adjustable 3 Tube Bypass Shock Design Allows You To Adjust Compression And Rebound
- Bypass Shocks Have A Built In Bump Zone For Better Bottoming Control
- All New Threaded End Cap Design w/New Schrader Valve Protective Cap
- Factory Tuned For Optimal Ride Quality
- Made From Extruded 6061-T6 Aluminum
- 100 Percent Bolt On Installation
- 1 in. Diameter Shafts
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
King OEM performance kit custom tuned to provide your Ford with unparalleled levels of performance and ride quality. Each kit has been subjected to punishing real world testing to develop the optimal damping curve and spring rate for your vehicle. Easy bolt-on installation for stock height or custom kits for trucks running lifted aftermarket suspensions.
- Time Tested; Durable; Race Engineered
- Tuned For Every Vehicle Application
- Up To 45000 Miles Without Failure
- Long Wearing Urethane Seals
- 100 Percent Made In The USA
- Available In Custom Lengths
- Easy Bolt-On Installation
- Increases Wheel Travel
- All Necessary Hardware
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
King OEM performance kit custom tuned to provide your Ford with unparalleled levels of performance and ride quality. Each kit has been subjected to punishing real world testing to develop the optimal damping curve and spring rate for your vehicle. Easy bolt-on installation for stock height or custom kits for trucks running lifted aftermarket suspensions.
- External Finned Reservoirs Increase Fluid Capacity; Heat Dissipation And Provide Sustained Damping Performance
- Dynamometer Lab And Punishing Testing To Develop The Optimal Damping Curves And Spring Rates For Your Bronco
- Optional 2.5 Wide Range Compression Adjuster That Gives 20 Precise Clicks Of Compression Damping Adjustment
- Built From The Same Quality Materials And To The Same Precise Tolerances Pure Race Series Shocks
- Large 2.5 Diameter Shock Bodies Increase Fluid Capacity For Smoother; Cooler Running Shocks
- Fully Rebuildable; Serviceable And Tunable
- Factory Tuned For Optimal Ride Quality
- 100 Percent Bolt-On Performance
- Increased Wheel Travel
- Adjustable Ride Height
- Fits 35 in. Tires
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | Bronco | Badlands |
| 2021-2023,2025 | Ford | Bronco | Base |
| 2021-2025 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2025 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2025 | Ford | Bronco | Outer Banks |
| 2022-2025 | Ford | Bronco | Raptor |
| 2025 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
King OEM performance kit custom tuned to provide your Ford with unparalleled levels of performance and ride quality. Each kit has been subjected to punishing real world testing to develop the optimal damping curve and spring rate for your vehicle. Easy bolt-on installation for stock height or custom kits for trucks running lifted aftermarket suspensions.
- External Finned Reservoirs Increase Fluid Capacity; Heat Dissipation And Provide Sustained Damping Performance
- Dynamometer Lab And Punishing Testing To Develop The Optimal Damping Curves And Spring Rates For Your Bronco
- Optional 2.5 Wide Range Compression Adjuster That Gives 20 Precise Clicks Of Compression Damping Adjustment
- Built From The Same Quality Materials And To The Same Precise Tolerances Pure Race Series Shocks
- Large 2.5 Diameter Shock Bodies Increase Fluid Capacity For Smoother; Cooler Running Shocks
- Fully Rebuildable; Serviceable And Tunable
- Factory Tuned For Optimal Ride Quality
- 100 Percent Bolt-On Performance
- Increased Wheel Travel
- Adjustable Ride Height
- Fits 35 in. Tires
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | Bronco | Badlands |
| 2021-2023,2025 | Ford | Bronco | Base |
| 2021-2025 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2025 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2025 | Ford | Bronco | Outer Banks |
| 2022-2025 | Ford | Bronco | Raptor |
| 2025 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
The ICON 95206R is the passenger-side rear shock from ICON Vehicle Dynamics' 3.0 Series Zeta RXT line, built for the 2021-2026 third-generation Ford F-150 Raptor. It is a three-tube bypass shock with a 3.0" remote reservoir and ICON's Compression Damping Electronic Valve (CDEV), made to bolt into the factory rear shock location while adding rear wheel travel and heat capacity.
More travel from the factory mount. ICON says the shock length is specific to the Raptor and is meant to be paired with ICON rear coil springs, giving up to 17 inches of rear wheel travel. A side-mounted upper eyelet makes the shock shorter collapsed and longer at full extension while still using the factory mounting location.
Cooler oil under hard use. The recirculating dual-hose reservoir (patent pending) uses a check valve to swap hot oil from the shock body with cooler oil from the 12.5" long, 3.0" diameter finned reservoir. ICON says this lets the truck be driven harder for longer without shock fade.
Tool-free tuning. Each bypass valve has its own port design and spring rate for its zone of travel, with damped valve stops that avoid the clicking noise typical of bypass shocks. Detented adjustment knobs turn in quarter-turn steps, so you can go from plush off-road settings to firmer street settings in seconds.
Electronic compression control. The CDEV valve meters oil flow to change compression damping force, and ICON says it reacts in under 40 ms. Used with ICON Intelligent Control and the ICON mobile app, it uses the onboard G-force sensor and gyroscope to predict terrain and adjust the valve. The shocks are no longer wired directly to the Raptor's ECU, so damping can be set independently of the selected drive mode.
Serviceable design. The bypass tubes are replaceable during a standard rebuild if one is damaged, rather than replacing the whole shock body. A protective shin guard shields the shaft from debris strikes, and an Anti-Wobble Link (patent pending) keeps the bypass tubes clear of the wheel and tire.
Features
- Passenger-side rear, 3.0 RXT three-tube bypass shock with 3.0 remote reservoir
- CDE valve for in-vehicle and active compression damping adjustment, independent of bypass settings
- 12.5" finned aluminum reservoir with recirculating dual-hose design
- Tool-free detented bypass knobs in quarter-turn increments
- High-flow CNC machined welded bypass blocks
- Replaceable bypass tubes, Cerakoted cylinder, hard anodized aluminum bypass tubes
- Application-specific length for up to 17" of rear wheel travel with ICON rear coil springs
- Side-mounted upper eyelet, direct bolt-in to the OEM location
- Shin guard and Anti-Wobble Link
Emissions: This is a suspension part with no emissions equipment. Prop 65 warning applies to this product.
Fitment: ICON lists this shock for the 2021-2026 Gen 3 Ford F-150 Raptor, passenger side rear. Fitment confirmed against ICON Vehicle Dynamics' published product listing.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
The ICON 95206L is the driver-side rear shock from ICON Vehicle Dynamics' RXT 3.0 Zeta bypass series, built specifically for the 2021-2026 third-generation Ford F-150 Raptor. It pairs a 3-tube bypass body with a 3.0-inch remote reservoir and ICON's electronically controlled CDEV compression valve, so you can tune how the rear of the truck rides on the street, in the dirt and under load.
Built for more rear wheel travel. ICON designed the shock length to be paired with its rear coil springs, which it says gives up to 17 inches of rear wheel travel. A side-mounted upper eyelet makes the shock shorter when collapsed and longer at full extension while still using the factory mounting location.
Cooler, more consistent damping. The recirculating dual-hose remote reservoir (patent pending) uses a check valve to swap hot fluid in the shock body for cooler fluid in the 12.5-inch finned reservoir. That extra surface area and nitrogen volume helps the shock resist fade when the truck is driven hard for long stretches.
Tool-free bypass tuning. Each bypass valve has its own port design and spring rate for its zone of shock travel, with damped valve stops that avoid the clicking noise common on other bypass shocks. Detented knobs adjust in quarter-turn increments by hand, from a plush off-road setting to a firmer on-road setting for the mountains or towing.
Electronic compression control with CDEV. The Compression Damping Electronic Valve meters oil flow to set compression damping and, according to ICON, reacts in under 40 milliseconds. Powered by ICON Intelligent Control and the ICON mobile app, it uses the onboard G-force sensor and gyroscope to predict terrain and adjust the shock. Because the shocks no longer rely on the Raptor's factory ECU signal, damping can be set independently of the selected drive mode.
Serviceable construction. The bypass tubes are replaceable, so a damaged tube can be swapped during a rebuild instead of replacing the whole shock body. A shin guard protects the shaft's sealing surface from debris strikes, and the cylinder is Cerakote finished with hard anodized aluminum bypass tubes.
Features
- Driver-side rear shock for the 2021-2026 Ford F-150 Raptor, direct bolt-in to the factory location
- 3.0 RXT 3-tube bypass design with a 3.0-inch remote reservoir
- CDEV valves allow in-vehicle and active compression damping adjustment, independent of bypass settings
- Recirculating dual-hose reservoir (patent pending) with a 12.5-inch finned aluminum body
- Tool-free, quarter-turn detented bypass adjustment knobs
- High-flow CNC machined welded bypass blocks
- Application-specific length for up to 17 inches of rear wheel travel with ICON rear coil springs
- Anti-Wobble Link (patent pending) keeps the bypass tubes clear of the wheel and tire
- Replaceable bypass tubes, protective shin guard, Cerakote cylinder finish
Fitment: ICON lists this shock for the 2021-2026 Ford F-150 Raptor (third generation), driver rear. Fitment confirmed against ICON's published product page for part 95206L.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
$4,099.95
This is the FOX 3.0 Factory Race Series Live Valve rear shock set, part number 883-09-153, built for the 2019-2020 Ford F-150 Raptor. It pairs FOX's internal bypass damping with semi-active Live Valve control and an external cooling system, so the rear of the truck stays controlled when you are driving fast on rough ground.
Live Valve adapts as you drive. Using vehicle sensors and accelerometers, Live Valve reacts to inertial, steering, braking and acceleration inputs and adjusts damping to balance handling, comfort and bottom-out resistance. FOX describes the integration as plug and play with the factory electronics.
Three-way quick switch adjusters. The Quick Switch (QS3) adjusters let you tune rebound and compression for on-road performance, on-road comfort or off-road performance.
External cooling for hard use. The external cooling system (ECS2) helps the shocks hold their performance during long, fast runs, such as desert driving. Rotatable hose fittings make routing the reservoir hoses easier during installation.
Built from race-proven materials. FOX lists a 3.0 inch impact-extruded, CNC-machined 6061-T6 hard-anodized aluminum body, a 7/8 inch hard chrome plated 17-4 H900 stainless steel shaft, a hard-anodized billet aluminum high-flow race piston, and a redundant seal pack (main seal, wiper seal and scraper seal).
Specifications from FOX. Series: Factory Race. Travel: 12.19 inches. Extended length: 31.18 inches. Compressed length: 18.99 inches. Top and bottom mounts: eyelet. Position: rear. Mounting hardware is included.
Features
- Live Valve semi-active technology with plug and play integration to the factory electronics
- Rebound and compression adjustable through Quick Switch (QS3) technology
- FOX patented, position-sensitive internal bypass damping
- External cooling system (ECS2) with rotatable hose fittings
- Application-specific valving for the Raptor
- PTFE-lined, heat-treated alloy steel spherical bearings
- Mounting hardware included
Fitment: 2019-2020 Ford F-150 Raptor, rear. Fitment confirmed against FOX's published application list.
Guides & Manuals
Owner's ManualInstallation Instructions
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2020 | Ford | F-150 | Raptor |
$3,899.95
This is the FOX Factory Race Series rear shock set built for the 2017-2018 Ford F-150 Raptor. FOX designed the kit around the same external bypass, Quick Adjust Bypass (QAB) and external cooling technology it uses on race-winning off-road trucks, and tuned it for the second-generation Raptor so you get more capable damping without giving up everyday ride quality.
Race-bred external bypass damping. Position-sensitive external bypass control lets the shock stay supple through small and mid-stroke terrain, then build firm support deeper in the travel. The result is a truck that stays composed at speed over whoops, washboard and big hits.
Quick Adjust Bypass knobs for easy tuning. The QAB adjusters let you change the bypass feel yourself to suit load, terrain and driving style, rather than living with one fixed tune.
External reservoirs that shed heat. Each shock uses a remote reservoir with FOX's external cooling system (ECS2) to dissipate heat, which helps keep damping consistent through long, hard runs.
Built to be serviced. FOX specifies a stainless steel shaft, a redundant sealing system and spherical bearings, and the shocks are designed to be rebuilt and retuned over their lifespan rather than thrown away.
Complete set for the rear axle. You receive a left and right pair, and the product photos show the mounting hardware and brackets that ship alongside them. The shocks are listed at 12.27 inches of travel, with an extended length of 31.15 inches and a compressed length of 18.88 inches.
Features
- FOX Factory Race Series external bypass rear shocks for the Gen 2 Raptor
- Quick Adjust Bypass (QAB) knobs for easy adjustment
- External reservoir cooling system (ECS2) to dissipate heat quickly
- 12.27 in travel, 2.5 in body diameter, eyelet top and bottom mounts
- Black anodized CNC machined aluminum components
- 17-4 H900 stainless steel shaft with redundant seals
- Teflon-lined, heat-treated spherical bearings
- Serviceable and tunable for a longer working life
- ORB O-ring port fittings for a secure seal
Fitment: 2017-2018 Ford F-150 Raptor, rear. Fitment confirmed against FOX's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2018 | Ford | F-150 | Raptor |
$50.00
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.