Welcome to RaptorsOnly.com
-
Brands
Shop by brand
- 3D MAXpider
- Access
- Addictive Desert Designs
- Advan
- AEM Induction
- aFe
- Air Lift
- Airaid
- Alcon
- AlphaRex
- AMP Research
- AMS
- Anderson Composites
- ANZO
- ARB
- Atturo Tire
- AutoMeter
- AVS
- AWE Tuning
- BackRack
- Baer Brakes
- Baja Designs
- BAK
- Banks Power
- BBK
- BBS
- BD Diesel
- Belltech
- Bestop
- BFGoodrich
- BMC
- Body Armor 4x4
- Borla
- Brembo
- Brembo OE
- Bully Dog
- Bushwacker
- Camburg
- Clevite
- COBB
- Cometic Gasket
- COMP Cams
- CORSA Performance
- Covercraft
- CSF
- DBA
- DeatschWerks
- DFC
- Diode Dynamics
- DS18
- DV8 Offroad
- Eaton
- EBC
- Eibach
- Enkei
- Extang
- Fabtech
- Fel-Pro
- fifteen52
- Firestone
- Flowmaster
- Ford Racing
- Forgestar
- FORM Lighting
- FOX
- Garrett
- Gates
- GEN-Y Hitch
- Go Fast Bits
- Go Rhino
- Gram Lights
- Granatelli Motor Sports
- GSC Power Division
- Hawk Performance
- Hella
- Hellwig
- Hotchkis
- Husky Liners
- ICON
- Injen
- J&L
- JBA
- JLT
- K&N Engineering
- KC HiLiTES
- King Engine Bearings
- King Shocks
- Kleinn Air Horns
- Kooks Headers
- KYB
- LIQUI MOLY
- LUND
- Magnaflow
- Mahle OE
- Maxtrac
- Mayhem
- MBRP
- McGard
- Method Wheels
- MGP
- Michelin
- Mickey Thompson
- Mishimoto
- Moog
- Motul
- MTX Wheels
- N-Fab
- Nacho Offroad Technology
- NGK
- Nitrous Express
- Odyssey Battery
- ORACLE Lighting
- PowerStop
- Putco
- QA1
- Raceline
- Radium Engineering
- Rally Armor
- Rampage
- Raxiom
- Retrax
- Rhino-Rack
- Ridetech
- Rigid Industries
- Rival 4x4
- RockJock
- Roll-N-Lock
- Roush
- Royal Purple
- SCT Performance
- Skyjacker
- Snow Performance
- SPC Performance
- SPOD
- Stainless Works
- Superlift
- Superpro
- Timbren
- Torque Solution
- TOYO
- Truxedo
- Tuff Country
- Turbosmart
- UMI Performance
- Undercover
- Volant
- Vossen
- Wagner Tuning
- WeatherTech
- Weld
- Westin
- Whiteline
- Wilwood
- Yokohama Tire
- Yukon Gear & Axle
- Zone Offroad
No brands found. Try another name or initial.
156 brands
View all brands -
F-150 Raptor
- F-150 Raptor
-
1st Gen (2010-2014)
-
2nd Gen (2017-2020)
-
3rd Gen (2021-Present)
-
Raptor R (2023-Present)
-
Bronco Raptor
- Bronco Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
-
Ranger Raptor
- Ranger Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
Your cart
Subheading
Product comparison
Describe you product comparison grid
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
A Pillar Lights
Choose a type to refine the products below.
7 products
7 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$679.99
The RIGID 360-Series Spot A-Pillar Kit mounts a pair of 4-inch round 360-Series lights on the A-pillars of a 2021-2027 Ford F-150 Raptor or Raptor R, using vehicle-specific brackets, so you add premium trail lighting with a factory-style look.
Spot output with a colored backlight. The 360-Series pairs a strong forward spot beam with an RGBW backlight, so the lights can add a custom accent as well as throw light down the trail. It is the efficient pick of this group, drawing 2 amps at 14 volts.
Built for a clean install. The kit ships with vehicle-specific A-pillar brackets, mounting hardware, and a wiring harness and switch (no relay is included). Rigid publishes one installation sheet for the F-150 and F-150 Raptor A-pillar kits, linked below, so you can review the steps first.
Rated and measured. Rigid lists the pair at 28 watts and 3,060 raw lumens, with a 9V to 36V operating range and a 16.5 by 15.7 degree spot beam.
Features
- Pair of RIGID 4-inch 360-Series Spot LED lights with RGBW backlight
- Vehicle-specific black A-pillar brackets and mounting hardware
- Wiring harness and switch included (no relay)
- 9V to 36V operating range, 28 watts, 3,060 raw lumens, 2 amps at 14 volts
- Spot beam pattern, 16.5 degree horizontal by 15.7 degree vertical
- Pod light shape, A-pillar mount type
Compliance. Rigid's page carries the California Proposition 65 notice for this product; read it on the maker's page before you buy.
Fitment. Rigid Industries lists this kit as fitting 2021-2027 Ford F-150 and F-150 Raptor. For the Raptor R that applies from its 2023 model year. Fitment confirmed against Rigid Industries' published application list.
Guides & Manuals
I-Sheet Ford F-150/Raptor A-Pillar KitThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2027 | Ford | F-150 | Raptor |
| 2023-2027 | Ford | F-150 | Raptor R |
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | Police Responder |
| 2021-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
$839.99
The RIGID D-XL Spot A-Pillar Kit mounts a pair of high-output D-XL pod lights to the A-pillars of a 2021-2027 Ford F-150 Raptor or Raptor R, with brackets made for this truck, so you can add serious forward lighting without improvising a mount.
Maximum forward projection. The D-XL is the brightest pod in this group of A-pillar kits. Rigid designed it for distance, and its spot pattern reaches well down trails, back roads and open terrain, giving you more time to read obstacles when you are moving quickly.
Built for a clean install. The kit ships with vehicle-specific A-pillar brackets, mounting hardware, vibration isolators and a wiring harness and switch with relay. Rigid publishes one installation sheet for the F-150 and F-150 Raptor A-pillar kits, linked below, so you can review the steps first.
Rated and measured. Rigid lists the pair at 68 watts, 7,128 raw lumens and 4.86 amps at 14 volts, with a 9V to 36V operating range and a 16.5 by 16.6 degree spot beam.
Features
- Pair of RIGID D-XL Spot LED pod lights
- Vehicle-specific black A-pillar brackets and mounting hardware
- Wiring harness and switch with relay, plus vibration isolators
- 9V to 36V operating range, 68 watts, 7,128 raw lumens, 4.86 amps at 14 volts
- Spot beam pattern, 16.5 degree horizontal by 16.6 degree vertical
- Pod light shape, A-pillar mount type
Compliance. Rigid's page carries the California Proposition 65 notice for this product; read it on the maker's page before you buy.
Fitment. Rigid Industries lists this kit as fitting 2021-2027 Ford F-150 and F-150 Raptor. For the Raptor R that applies from its 2023 model year. Fitment confirmed against Rigid Industries' published application list.
Guides & Manuals
I-Sheet Ford F-150/Raptor A-Pillar KitThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2027 | Ford | F-150 | Raptor |
| 2023-2027 | Ford | F-150 | Raptor R |
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | Police Responder |
| 2021-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
$639.99
The RIGID D-SS Spot A-Pillar Kit puts a pair of 4-inch side-shooter pod lights on the A-pillars of a 2021-2027 Ford F-150 Raptor or Raptor R, using brackets made for this truck, so you gain trail lighting without drilling up the body or cutting into the factory look.
Peripheral light where you need it. The D-SS pod throws a side-emitting 180 degree beam in addition to its forward spot, which lights the edges of the trail, ditches and the corners you are about to turn into. Mounted at the A-pillar, the lights sit close to your line of sight, so the glare stays out of the hood and windshield.
Built for a clean install. The kit ships with vehicle-specific A-pillar brackets, mounting hardware, a wiring harness and a switch (no relay is included). Rigid publishes a single installation sheet for the F-150 and F-150 Raptor A-pillar kits, linked below, so you can review the steps before you start.
Rated and measured. Rigid lists the pair at 45 watts, 5,544 raw lumens and 3.21 amps at 14 volts, with a 9V to 36V operating range and a 17.3 by 16 degree spot beam.
Features
- Pair of RIGID D-SS Spot LED pod lights with a side-emitting 180 degree beam
- Vehicle-specific black A-pillar brackets and mounting hardware
- Wiring harness and switch included (no relay)
- 9V to 36V operating range, 45 watts, 5,544 raw lumens, 3.21 amps at 14 volts
- Spot beam pattern, 17.3 degree horizontal by 16 degree vertical
- Pod light shape, A-pillar mount type
Compliance. Rigid's page carries the California Proposition 65 notice for this product; read it on the maker's page before you buy.
Fitment. Rigid Industries lists this kit as fitting 2021-2027 Ford F-150 and F-150 Raptor. For the Raptor R that applies from its 2023 model year. Fitment confirmed against Rigid Industries' published application list.
Guides & Manuals
I-Sheet Ford F-150/Raptor A-Pillar KitThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2027 | Ford | F-150 | Raptor |
| 2023-2027 | Ford | F-150 | Raptor R |
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | Police Responder |
| 2021-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
$558.95
The Baja Designs Squadron 2.0 Sport A-Pillar Light Kit adds a pair of compact LED ditch lights to your Ford Raptor, filling in the dark corners that the factory headlights leave behind on trails and back roads. Baja Designs engineered this kit specifically for the F-150 Raptor, including the Raptor 37 and Raptor R, so the brackets bolt to the A-pillar without cutting or drilling.
Light where the headlights miss. Mounted at the base of the windshield, A-pillar lights throw a wide angle of light to the sides of the truck. That helps you spot rocks, drop-offs and turns earlier, and it works as scene lighting at a campsite or job site.
Brighter than the last generation. Each Squadron 2.0 Sport pod puts out 3,200 raw lumens from 30W (2.2A), which Baja Designs rates as a 26% performance increase over the previous generation, with improved beam control and efficiency. The 5000K daylight color is easier on your eyes on long night runs.
Built to take weather. MoistureBlock construction and a redesigned gasket keep water and dust out, DirectSink moves heat away from the LEDs, and the 4-pin Deutsch connector gives a secure, weatherproof plug-in connection.
Easy to change and aim. uService clip-in reflectors make lens swaps simple, and the kit includes spot and wide cornering clear lens kits. A redesigned bracket gives more vertical adjustment so you can aim each pod to suit your truck's stance. An RGBW backlight offers nine selectable colors.
Features
- (2) Squadron 2.0 Sport LED lights, Driving/Combo pattern, clear lens
- (2) vehicle-specific A-pillar mounting brackets
- (1) upfitter harness and (1) 55-inch splitter harness
- (2) Squadron 2.0 spot clear lens kits and (2) wide cornering clear lens kits
- All necessary mounting hardware
- 3,200 lumens and 30W / 2.2A per light
- ClearView optics, DirectSink thermal path, MoistureBlock sealing, uService replaceable lenses
- 30-day money-back guarantee and limited lifetime warranty
Emissions: California Proposition 65 warning applies: Cancer and Reproductive Harm, www.P65Warnings.ca.gov.
Fitment: Baja Designs lists the Ford F-150 Raptor 2021-2026, the Raptor 37 2024-2026 and the Raptor R 2024-2026. Fitment confirmed against Baja Designs' published application list.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2024-2026 | Ford | F-150 | Raptor 37 |
| 2024-2026 | Ford | F-150 | Raptor R |
$737.95
The Baja Designs Squadron 2.0 Pro A-Pillar Light Kit adds a pair of wide-angle LED ditch lights to your Ford F-150 Raptor, so the trail edges and corners that the headlights miss stay lit at night. It is a complete two-light package with vehicle-specific brackets and wiring, built for the Raptor, Raptor 37 and Raptor R.
More light where headlights fall short. A-pillar (ditch) lights throw a wide beam out to the sides of the truck, filling in blind spots and helping you spot rocks, drop-offs and obstacles while you are navigating trails or turning into a corner. Each Squadron 2.0 Pro pod produces 5,921 lumens, which Baja Designs describes as a 21% increase over the previous generation, with improved beam control and efficiency.
Aim it where you need it. The newly engineered A-pillar bracket gives increased vertical adjustability, so you can dial in the aim for your driving and expand your field of view. The included upfitter harness and 55-inch splitter harness let you wire both lights into the truck without a ground-up wiring job.
Built to be serviced. The Squadron 2.0 Pro uses Baja Designs' uService design with clip-in reflectors for simple lens swaps, a redesigned gasket for improved sealing, a durable 4-pin Deutsch connector, and a user-selectable backlight with nine color choices. The kit ships with Driving/Combo clear lenses installed plus Spot clear and Wide Cornering clear lens kits, so you can change the pattern to suit the trail.
Features
- Two Squadron 2.0 Pro LED lights, Driving/Combo, clear
- Two A-pillar mounting brackets
- One upfitter harness and one 55-inch splitter harness
- Two Squadron 2.0 lens kits, Spot clear, and two lens kits, Wide Cornering clear
- All necessary mounting hardware
- 5,921 lumens per light, 65 watts and 4.7 amps per light
- Main light operating voltage 10V to 36V DC; backlight 11V to 14V DC
- 5000K daylight white light
- Nine-color selectable backlight
- IP69K rated; MoistureBlock waterproofing and DirectSink thermal path
- 4-pin Deutsch connector
- Manufacturer part number: 440021
Warranty. Baja Designs backs this kit with a limited lifetime warranty and a 30-day satisfaction guarantee.
Fitment: Baja Designs lists the Ford F-150 Raptor 2021-2026, the F-150 Raptor 37 2024-2026 and the F-150 Raptor R 2024-2026. Fitment confirmed against Baja Designs' published application list.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2024-2026 | Ford | F-150 | Raptor 37 |
| 2024-2026 | Ford | F-150 | Raptor R |
$1,020.95
The Baja Designs XL80 A-Pillar Light Kit (part 448060) is a bolt-on auxiliary lighting package for the 2021-2026 Ford F-150 Raptor, including the 2024-2026 Raptor 37 and Raptor R. It puts two XL80 LED pods on vehicle-specific brackets at the base of the windshield, so you get far more light along the trail edges and into turns than the factory headlights alone provide.
Built for the Raptor's A-pillar. The two included A-pillar brackets are made for this truck and use the existing cowl mounting locations, so the pods sit where ditch lights belong without cutting or drilling the body.
Wide, usable light. Each XL80 is rated at 9,022 raw lumens (75.9 W, 5.5 A) at 5000K daylight color. The pods ship in a Driving/Combo pattern, and the kit also includes clear spot and clear wide cornering lens kits, so you can change the beam to suit your terrain, from reaching down the trail to flooding the corners.
Hardware and wiring included. A trigger switch harness (part 640180) and stainless steel mounting hardware come in the box. Wiring and final aiming are part of the install, and the kit ships as individual components that you assemble on the truck.
Tough, serviceable construction. The XL80 uses a hard-anodized, powder-coated cast aluminum housing, a hard-coated polycarbonate lens, and Baja Designs' uService replaceable lenses and optics, ClearView lighting control, MoistureBlock sealing and DirectSink thermal management. It is rated IP69K (dust-tight, pressure-washable, waterproof to 9 ft), IK10 impact rated, and tested beyond MIL-STD-810G. Baja Designs backs the kit with a limited lifetime warranty and a 30-day satisfaction guarantee.
Features
- Part number: 448060
- Two XL80 LED pods, Driving/Combo, clear lens
- Two vehicle-specific A-pillar mounting brackets
- Trigger switch harness 640180
- Two clear spot lens kits and two clear wide cornering lens kits
- Stainless steel mounting hardware
- 9,022 raw lumens, 75.9 W, 5.5 A per light
- Pod size about 4.4 in x 4.4 in x 3.65 in deep
- 5000K daylight color
- Cree LED, built-in overvoltage protection
Emissions and warnings. Prop 65: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. See www.P65Warnings.ca.gov.
Fitment: Baja Designs lists this kit for the 2021-2026 Ford F-150 Raptor, the 2024-2026 F-150 Raptor 37 and the 2024-2026 F-150 Raptor R. Fitment confirmed against Baja Designs' published application list.
Guides & Manuals
Baja Designs 448060 Installation SheetThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2024-2026 | Ford | F-150 | Raptor 37 |
| 2024-2026 | Ford | F-150 | Raptor R |
$761.95
The Baja Designs XL Sport A-Pillar LED Light Kit (part 448058) adds a pair of high-output auxiliary pods to the A-pillars of your 2021-2026 Ford F-150 Raptor. It is built for night trail driving, where the stock headlights leave blind spots to the sides and the pods fill them with usable light.
Ditch and distance lighting in one kit. Each XL Sport pod puts out 3,162 raw lumens at 5000K daylight color. The driving/combo clear lens covers lighting zones 1, 2 and 3 and reaches into zone 4, so you see the edge of the trail and well down it. The kit also includes spare spot and wide cornering lens kits, so you can change the pattern to suit the way you drive.
Mounts to the factory A-pillar points. The powder-coated brackets bolt to the factory mounting locations with the supplied stainless steel hardware, and Baja Designs says no drilling or vehicle modification is needed. The brackets let you adjust the aim for forward or ditch lighting. Position the pods so they do not block hood prop rod access.
Built to take trail abuse. The housings are cast aluminum with a hard-coated polycarbonate lens. Baja Designs lists IP69K water and pressure-wash resistance, IK10 impact compliance, MIL-STD-810G testing, built-in overvoltage protection and an average rated life of 49,930 hours. uService replaceable lenses and optics, ClearView optics, MoistureBlock sealing and DirectSink thermal management are part of the XL Sport design.
Features
- Manufacturer part number: 448058
- Pods: 2 XL Sport LED lights, Driving/Combo, clear lens
- Also included: 2 A-pillar mounting brackets, 1 trigger switch harness (640180), 2 XL spot lens kits, 2 XL wide cornering lens kits, all mounting hardware
- Light output: 3,162 raw lumens per pod, 5000K
- Electrical draw: 30.36 W and 2.2 A per pod
- Pod size: 4.43 x 4.43 x 3.65 in, 2.45 lb each
- Protection: IP69K, IK10, MIL-STD-810G
- Backed by Baja Designs' 30-day money-back guarantee and limited lifetime warranty
Emissions and warnings. Baja Designs lists a California Proposition 65 warning for this product (cancer and reproductive harm, www.P65Warnings.ca.gov). It is an off-road auxiliary light; check your local laws before using it on public roads.
Fitment: Baja Designs lists this kit for the Ford F-150 Raptor 2021-2026, the Raptor 37 2024-2026 and the Raptor R 2024-2026. Fitment confirmed against Baja Designs' published application list.
Guides & Manuals
Baja Designs 448058 Installation Sheet
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2024-2026 | Ford | F-150 | Raptor 37 |
| 2024-2026 | Ford | F-150 | Raptor R |
- Choosing a selection results in a full page refresh.
- Opens in a new window.