Welcome to RaptorsOnly.com
-
Brands
Shop by brand
- 3D MAXpider
- Access
- Addictive Desert Designs
- Advan
- AEM Induction
- aFe
- Air Lift
- Airaid
- Alcon
- AlphaRex
- AMP Research
- AMS
- Anderson Composites
- ANZO
- ARB
- Atturo Tire
- AutoMeter
- AVS
- AWE Tuning
- BackRack
- Baer Brakes
- Baja Designs
- BAK
- Banks Power
- BBK
- BBS
- BD Diesel
- Belltech
- Bestop
- BFGoodrich
- BMC
- Body Armor 4x4
- Borla
- Brembo
- Brembo OE
- Bully Dog
- Bushwacker
- Camburg
- Clevite
- COBB
- Cometic Gasket
- COMP Cams
- CORSA Performance
- Covercraft
- CSF
- DBA
- DeatschWerks
- DFC
- Diode Dynamics
- DS18
- DV8 Offroad
- Eaton
- EBC
- Eibach
- Enkei
- Extang
- Fabtech
- Fel-Pro
- fifteen52
- Firestone
- Flowmaster
- Ford Racing
- Forgestar
- FORM Lighting
- FOX
- Garrett
- Gates
- GEN-Y Hitch
- Go Fast Bits
- Go Rhino
- Gram Lights
- Granatelli Motor Sports
- GSC Power Division
- Hawk Performance
- Hella
- Hellwig
- Hotchkis
- Husky Liners
- ICON
- Injen
- J&L
- JBA
- JLT
- K&N Engineering
- KC HiLiTES
- King Engine Bearings
- King Shocks
- Kleinn Air Horns
- Kooks Headers
- KYB
- LIQUI MOLY
- LUND
- Magnaflow
- Mahle OE
- Maxtrac
- Mayhem
- MBRP
- McGard
- Method Wheels
- MGP
- Michelin
- Mickey Thompson
- Mishimoto
- Moog
- Motul
- MTX Wheels
- N-Fab
- Nacho Offroad Technology
- NGK
- Nitrous Express
- Odyssey Battery
- ORACLE Lighting
- PowerStop
- Putco
- QA1
- Raceline
- Radium Engineering
- Rally Armor
- Rampage
- Raxiom
- Retrax
- Rhino-Rack
- Ridetech
- Rigid Industries
- Rival 4x4
- RockJock
- Roll-N-Lock
- Roush
- Royal Purple
- SCT Performance
- Skyjacker
- Snow Performance
- SPC Performance
- SPOD
- Stainless Works
- Superlift
- Superpro
- Timbren
- Torque Solution
- TOYO
- Truxedo
- Tuff Country
- Turbosmart
- UMI Performance
- Undercover
- Volant
- Vossen
- Wagner Tuning
- WeatherTech
- Weld
- Westin
- Whiteline
- Wilwood
- Yokohama Tire
- Yukon Gear & Axle
- Zone Offroad
No brands found. Try another name or initial.
156 brands
View all brands -
F-150 Raptor
- F-150 Raptor
-
1st Gen (2010-2014)
-
2nd Gen (2017-2020)
-
3rd Gen (2021-Present)
-
Raptor R (2023-Present)
-
Bronco Raptor
- Bronco Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
-
Ranger Raptor
- Ranger Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
Your cart
Subheading
Product comparison
Describe you product comparison grid
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
F-150 Raptor 3rd Gen
Choose a department to narrow the parts below.
Suspension
Lighting
Bumpers & Armor
Racks
Interior Accessories
Exterior Accessories
Performance
Wheels & Tires
Brakes
Drivetrain
Engine & Cooling
815 products
815 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$85.00
One of the 21+ Ford F-150 Raptors weak links is the tabbing on the rear axle for the upper and lower trailing arms. Even with minimal off-road use we see cracking and tearing of the mounts and welds. We developed our weld-on axle gusset kit to easily solve this problem and further strengthen the mounts for heavy off-road use. The gussets keep the factory mounts from twisting as the suspension articulates and increases their attachment to the rear axle for better load distribution. Here’s an easy way to bulletproof your Raptor so you’re not stranded out on an adventure.
- Eliminates factory mounts from cracking
- CAD designed and precision laser cut
- Easy weld-on design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | F-150 | Raptor |
Our 17'-25' F-150 Raptor KINETIK Series billet upper control arms allow for increased wheel travel and articulation out on the trail, corrected suspension geometry with increased caster for improved handling both on and off-road and are considerably higher quality and higher strength compared to the OEM parts for off-road use. These arms have undergone extensive CAD designing and machining to meet our high standards. They are CNC machined in-house from aerospace quality 6061 billet aluminum, Type II anodized and laser etched. We utilize a larger FK 1.25" uniball with a military grade PTFE internal liner for increased strength, longevity and higher misalignment, allowing for maximum wheel travel. The uniball is adapted to the spindle/knuckle using model specific spacers machined from heat-treated stainless steel, for a precision fit without the need for drilling or modifications. The 1.25" uniball allows for a larger and stronger 12-point bolt with a low-profile press-on uniball cap to resist the elements. Additional camber and caster adjustment is available with the use of larger and stronger FK 7/8" chromoly heim joints, which also eliminate flexing/deflection under hard use and heavy braking without binding. Step by step instructions with all the necessary hardware ensure a successful installation for your next off-road adventure.
Installation Instructions- Superior design and components used for the ultimate strength
- Corrects suspension geometry for improved handling
- Designed for maximum wheel travel and articulation
- Eliminates weak factory ball-joints
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2025 | Ford | F-150 | Raptor |
Our 17'-25' F-150 Raptor KINETIK Series billet upper control arms allow for increased wheel travel and articulation out on the trail, corrected suspension geometry with increased caster for improved handling both on and off-road and are considerably higher quality and higher strength compared to the OEM parts for off-road use. These arms have undergone extensive CAD designing and machining to meet our high standards. They are CNC machined in-house from aerospace quality 6061 billet aluminum, Type II anodized and laser etched. We utilize a larger FK 1.25" uniball with a military grade PTFE internal liner for increased strength, longevity and higher misalignment, allowing for maximum wheel travel. The uniball is adapted to the spindle/knuckle using model specific spacers machined from heat-treated stainless steel, for a precision fit without the need for drilling or modifications. The 1.25" uniball allows for a larger and stronger 12-point bolt with a low-profile press-on uniball cap to resist the elements. Additional camber and caster adjustment is available with the use of larger and stronger FK 7/8" chromoly heim joints, which also eliminate flexing/deflection under hard use and heavy braking without binding. Step by step instructions with all the necessary hardware ensure a successful installation for your next off-road adventure.
Installation Instructions- Superior design and components used for the ultimate strength
- Corrects suspension geometry for improved handling
- Designed for maximum wheel travel and articulation
- Eliminates weak factory ball-joints
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2025 | Ford | F-150 | Raptor |
Our Camburg coil spring preload kits are a cost effective and easy way to lift and level the front of your '21-24 Gen3 Ford Raptor while still keeping the plush factory ride with the OEM Fox coilovers. Lifting the front also increases your compression travel which is a great benefit off-roading. We offer them in black and FOX orange versions. Don’t confuse these with standard cheap “spacer" lifts. These preload the coil spring, they do not space the shock down allowing the suspension to droop out too far and lose compression travel by bottoming out the shock sooner. Running a taller tire will also increase needed ground clearance when off-roading. We CNC machine these in-house from aerospace quality 6061-T6 aluminum, then have them anodized and laser etched. These install easily onto your factory OEM Fox coilovers and lift the front end 1.5". These are not designed to be used with aftermarket coil springs on the OEM stock shocks. Combine these with our KINETIK series billet upper control arms and trailing arms to correct and improve geometry for better handling. Use of a spring compressor required to install Can not be used in conjunction with an aftermarket coil spring Designed for the OEM FOX LiveValve shocks.
- Bead blasted, anodized and laser etched
- CNC machined in-house
- 6061-T6 Aluminum
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | F-150 | Raptor |
Our Camburg coil spring preload kits are a cost effective and easy way to lift and level the front of your '21-24 Gen3 Ford Raptor while still keeping the plush factory ride with the OEM Fox coilovers. Lifting the front also increases your compression travel which is a great benefit off-roading. We offer them in black and FOX orange versions. Don’t confuse these with standard cheap “spacer" lifts. These preload the coil spring, they do not space the shock down allowing the suspension to droop out too far and lose compression travel by bottoming out the shock sooner. Running a taller tire will also increase needed ground clearance when off-roading. We CNC machine these in-house from aerospace quality 6061-T6 aluminum, then have them anodized and laser etched. These install easily onto your factory OEM Fox coilovers and lift the front end 1.5". These are not designed to be used with aftermarket coil springs on the OEM stock shocks. Combine these with our KINETIK series billet upper control arms and trailing arms to correct and improve geometry for better handling. Use of a spring compressor required to install Can not be used in conjunction with an aftermarket coil spring Designed for the OEM FOX LiveValve shocks.
- Bead blasted, anodized and laser etched
- CNC machined in-house
- 6061-T6 Aluminum
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | F-150 | Raptor |
$126.00
This kit is what's required to rebuild the uniballs in your Camburg upper arms, spindles and lower arm inner pivots. The kit includes two FK 1.00" uniballs and two snap rings. These are made in the USA and are not some cheap imported parts. For optimum strength they are heat-treated and have a self-lubricating military grade PTFE liner internally for reduced stiction and noise. Having a 90,000 lbs. load rating, these are far stronger than OEM style ball-joints and cheaper or smaller uniball bearings. The bearing ID with the mis-alignment spacers removed is 1.00" and the bearing OD is 2.125".Refer to our instructions for step-by-step directions.
- 100,730 lb. load rating
- Stronger than OEM
- Made in the USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1999-2005 | Chevrolet | Silverado 1500 | Base |
| 2016-2018 | Chevrolet | Silverado 1500 | Custom |
| 2014-2018 | Chevrolet | Silverado 1500 | High Country |
| 2004-2006,2009-2013 | Chevrolet | Silverado 1500 | Hybrid |
| 1999-2013,2015-2018 | Chevrolet | Silverado 1500 | LS |
| 1999-2018 | Chevrolet | Silverado 1500 | LT |
| 2007-2018 | Chevrolet | Silverado 1500 | LTZ |
| 2003-2006 | Chevrolet | Silverado 1500 | SS |
| 2015-2018 | Chevrolet | Silverado 1500 | SSV |
| 2002-2018 | Chevrolet | Silverado 1500 | WT |
| 2010-2013 | Chevrolet | Silverado 1500 | XFE |
| 2004-2005 | Chevrolet | Silverado 1500 | Z71 Off-Road |
| 2021-2025 | Ford | Bronco | Badlands |
| 2021-2023 | Ford | Bronco | Base |
| 2021-2025 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 1992-1993 | Ford | Bronco | Custom |
| 1992-1996 | Ford | Bronco | Eddie Bauer |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2025 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2025 | Ford | Bronco | Outer Banks |
| 2021-2024 | Ford | Bronco | Wildtrak |
| 1992-1996 | Ford | Bronco | XL |
| 1992,1994-1996 | Ford | Bronco | XLT |
| 1993 | Ford | Bronco | XLT Lariat |
| 1992 | Ford | Bronco | XLT Nite |
| 1995-1996 | Ford | Bronco | XLT Sport |
| 2003-2014 | Ford | E-150 | Base |
| 2006-2007 | Ford | E-150 | Chateau |
| 2006-2014 | Ford | E-150 | XL |
| 2006-2014 | Ford | E-150 | XLT |
| 2003-2005 | Ford | E-150 Club Wagon | Chateau |
| 2003-2005 | Ford | E-150 Club Wagon | XL |
| 2003-2005 | Ford | E-150 Club Wagon | XLT |
| 1997-2002 | Ford | E-150 Econoline | Base |
| 1997-2000 | Ford | E-150 Econoline | XL |
| 1997-2002 | Ford | E-150 Econoline Club Wagon | Chateau |
| 1997-2000 | Ford | E-150 Econoline Club Wagon | Custom |
| 2001-2002 | Ford | E-150 Econoline Club Wagon | XL |
| 1997-2002 | Ford | E-150 Econoline Club Wagon | XLT |
| 2003-2004 | Ford | E-250 | Base |
| 1997-2002 | Ford | E-250 Econoline | Base |
| 1997-2000 | Ford | E-250 Econoline | XL |
| 2003-2004 | Ford | E-350 Club Wagon | Chateau |
| 2003-2004 | Ford | E-350 Club Wagon | XL |
| 2003-2004 | Ford | E-350 Club Wagon | XLT |
| 1997-1998 | Ford | E-350 Econoline | Base |
| 1997-1998 | Ford | E-350 Econoline | XL |
| 1997-2002 | Ford | E-350 Econoline Club Wagon | Chateau |
| 1997-2000 | Ford | E-350 Econoline Club Wagon | Custom |
| 2001-2002 | Ford | E-350 Econoline Club Wagon | XL |
| 1997-1998 | Ford | E-350 Econoline Club Wagon | XL HD |
| 1997-2002 | Ford | E-350 Econoline Club Wagon | XLT |
| 1997-1998 | Ford | E-350 Econoline Club Wagon | XLT HD |
| 1999-2004 | Ford | E-350 Super Duty | Base |
| 1999-2000 | Ford | E-350 Super Duty | XL |
| 1995-2005 | Ford | Explorer | Eddie Bauer |
| 1995-2005 | Ford | Explorer | Limited |
| 2004 | Ford | Explorer | NBX |
| 2000-2003 | Ford | Explorer | Postal |
| 1995-2000 | Ford | Explorer | Sport |
| 1995-1999 | Ford | Explorer | XL |
| 2000-2001 | Ford | Explorer | XL Fleet |
| 1999-2005 | Ford | Explorer | XLS |
| 2004-2005 | Ford | Explorer | XLS Sport |
| 1995-2005 | Ford | Explorer | XLT |
| 2004-2005 | Ford | Explorer | XLT Sport |
| 2005 | Ford | Explorer Sport Trac | Adrenalin |
| 2001 | Ford | Explorer Sport Trac | Base |
| 2002 | Ford | Explorer Sport Trac | XL |
| 2003-2005 | Ford | Explorer Sport Trac | XLS |
| 2003-2005 | Ford | Explorer Sport Trac | XLT |
| 1987-1992 | Ford | F-150 | Custom |
| 1995-1996 | Ford | F-150 | Eddie Bauer |
| 1993-1995 | Ford | F-150 | Lightning |
| 2017-2025 | Ford | F-150 | Raptor |
| 1995-1996 | Ford | F-150 | Special |
| 1987-1996 | Ford | F-150 | XL |
| 1993-1996 | Ford | F-150 | XLT |
| 1987-1992 | Ford | F-150 | XLT Lariat |
| 2009-2010 | Ford | F-250 Super Duty | Cabela's |
| 2008-2009 | Ford | F-250 Super Duty | FX4 |
| 2005-2010 | Ford | F-250 Super Duty | Harley-Davidson Edition |
| 2005-2024 | Ford | F-250 Super Duty | King Ranch |
| 2005-2024 | Ford | F-250 Super Duty | Lariat |
| 2018-2024 | Ford | F-250 Super Duty | Limited |
| 2013-2024 | Ford | F-250 Super Duty | Platinum |
| 2005-2024 | Ford | F-250 Super Duty | XL |
| 2005-2024 | Ford | F-250 Super Duty | XLT |
| 2009-2010 | Ford | F-350 Super Duty | Cabela's |
| 2008-2009 | Ford | F-350 Super Duty | FX4 |
| 2005-2010 | Ford | F-350 Super Duty | Harley-Davidson Edition |
| 2005-2024 | Ford | F-350 Super Duty | King Ranch |
| 2005-2024 | Ford | F-350 Super Duty | Lariat |
| 2018-2024 | Ford | F-350 Super Duty | Limited |
| 2013-2024 | Ford | F-350 Super Duty | Platinum |
| 2005-2024 | Ford | F-350 Super Duty | XL |
| 2005-2024 | Ford | F-350 Super Duty | XLT |
| 1989-1992 | Ford | Ranger | Custom |
| 2001-2005 | Ford | Ranger | Edge |
| 1998-2002 | Ford | Ranger | EV |
| 2005-2009 | Ford | Ranger | FX4 |
| 1989 | Ford | Ranger | GT |
| 2002 | Ford | Ranger | Postal |
| 1989-1992 | Ford | Ranger | S |
| 1990 | Ford | Ranger | S Plus |
| 1993-1998 | Ford | Ranger | Splash |
| 1991-1993,1997,2006-2011 | Ford | Ranger | Sport |
| 1989-1997,2005-2007 | Ford | Ranger | STX |
| 2004 | Ford | Ranger | Tremor |
| 1993-2011 | Ford | Ranger | XL |
| 1995 | Ford | Ranger | XL Sport |
| 1989-2011 | Ford | Ranger | XLT |
| 2002-2005,2014-2018 | GMC | Sierra 1500 | Base |
| 2001 | GMC | Sierra 1500 | C3 |
| 2002-2018 | GMC | Sierra 1500 | Denali |
| 2002 | GMC | Sierra 1500 | HT |
| 2005-2006,2009-2013 | GMC | Sierra 1500 | Hybrid |
| 1999-2003,2006-2013 | GMC | Sierra 1500 | SL |
| 1999-2018 | GMC | Sierra 1500 | SLE |
| 1999-2018 | GMC | Sierra 1500 | SLT |
| 2002-2013 | GMC | Sierra 1500 | WT |
| 2010-2013 | GMC | Sierra 1500 | XFE |
| 2003-2009 | Lexus | GX470 | Base |
| 2024-2025 | Lexus | GX550 | Luxury |
| 2024-2025 | Lexus | GX550 | Luxury+ |
| 2024-2025 | Lexus | GX550 | Overtrail |
| 2024-2025 | Lexus | GX550 | Overtrail+ |
| 2024-2025 | Lexus | GX550 | Premium |
| 2024-2025 | Lexus | GX550 | Premium+ |
| 2004-2010 | Nissan | TITAN | LE |
| 2008-2014 | Nissan | TITAN | PRO-4X |
| 2011-2014 | Nissan | TITAN | S |
| 2004-2010 | Nissan | TITAN | SE |
| 2011-2014 | Nissan | TITAN | SL |
| 2011-2014 | Nissan | TITAN | SV |
| 2004-2010 | Nissan | TITAN | XE |
| 2021-2023 | Ram | 1500 | TRX |
| 2021 | Ram | 1500 | TRX Launch Edition |
| 2023 | Toyota | 4Runner | 40th Anniversary Edition |
| 1996-2001 | Toyota | 4Runner | Base |
| 1996-2024 | Toyota | 4Runner | Limited |
| 2020-2021 | Toyota | 4Runner | Nightshade |
| 2003-2009 | Toyota | 4Runner | Sport |
| 1996-2024 | Toyota | 4Runner | SR5 |
| 2018-2024 | Toyota | 4Runner | SR5 Premium |
| 2010-2016,2021-2022 | Toyota | 4Runner | Trail |
| 2017-2024 | Toyota | 4Runner | TRD Off-Road |
| 2018-2024 | Toyota | 4Runner | TRD Off-Road Premium |
| 2015-2024 | Toyota | 4Runner | TRD Pro |
| 2022-2024 | Toyota | 4Runner | TRD Sport |
| 2020-2021 | Toyota | 4Runner | Venture |
| 2007-2014 | Toyota | FJ Cruiser | Base |
| 2008 | Toyota | FJ Cruiser | Trail Teams Special Edition |
| 2007 | Toyota | FJ Cruiser | TRD Special Edition |
| 2024-2025 | Toyota | Land Cruiser | 1958 |
| 2008-2011,2013-2021,2024-2025 | Toyota | Land Cruiser | Base |
| 2024 | Toyota | Land Cruiser | First Edition |
| 2020-2021 | Toyota | Land Cruiser | Heritage Edition |
| 2001-2021 | Toyota | Sequoia | Limited |
| 2021 | Toyota | Sequoia | Nightshade |
| 2008-2021 | Toyota | Sequoia | Platinum |
| 2001-2021 | Toyota | Sequoia | SR5 |
| 2020-2021 | Toyota | Sequoia | TRD Pro |
| 2018-2021 | Toyota | Sequoia | TRD Sport |
| 1996-2015 | Toyota | Tacoma | Base |
| 1998 | Toyota | Tacoma | DLX |
| 1998-2000,2016-2023 | Toyota | Tacoma | Limited |
| 1998-2015 | Toyota | Tacoma | Pre Runner |
| 2001-2004 | Toyota | Tacoma | S-Runner |
| 2016-2023 | Toyota | Tacoma | SR |
| 1996-2000,2016-2023 | Toyota | Tacoma | SR5 |
| 2021 | Toyota | Tacoma | Trail |
| 2023 | Toyota | Tacoma | Trail Special Edition |
| 2016-2023 | Toyota | Tacoma | TRD Off-Road |
| 2015,2017-2023 | Toyota | Tacoma | TRD Pro |
| 2016-2023 | Toyota | Tacoma | TRD Sport |
| 2014-2025 | Toyota | Tundra | 1794 Edition |
| 2000-2013 | Toyota | Tundra | Base |
| 2022-2025 | Toyota | Tundra | Capstone |
| 2000-2025 | Toyota | Tundra | Limited |
| 2021 | Toyota | Tundra | Nightshade |
| 2010-2025 | Toyota | Tundra | Platinum |
| 2014-2025 | Toyota | Tundra | SR |
| 2000-2011,2014-2025 | Toyota | Tundra | SR5 |
| 2021 | Toyota | Tundra | Trail |
| 2015-2017,2019-2025 | Toyota | Tundra | TRD Pro |
This is Borla's ATAK mid-section for the 2021-2026 Ford F-150 Raptor with the 3.5L V6, replacing the factory center section with a 3-inch true dual muffler assembly. It is a connecting-pipe upgrade, not a full cat-back, so the rear of the exhaust stays as it is unless you choose to change it.
True dual layout. The assembly keeps two separate paths from front to back, which Borla pairs with its ATAK sound level for an aggressive, more exciting driving experience without drone.
Polyphonic Harmonizer. Inside are Borla's patented units that use pipes of different diameters and lengths to create several exhaust notes that blend into a clean, rich, full-bodied tone, which Borla says improves power.
Active valves retained. The system contains active exhaust valves, so the factory valve function is kept.
Tail pipe choices. It works with the original equipment tail pipes or Borla's separate tail pipes in black chrome, Brawler black coated, or carbon fiber with black anodized center.
Build quality. T-304 stainless steel, mandrel bends and CNC manufacturing, plus a Million-Mile Warranty.
Features
- 3 in. true dual mid-section / muffler assembly
- ATAK sound level
- Polyphonic Harmonizer technology and active exhaust valves
- Fits with OE tail pipes or Borla 60727BC, 60727CB or 60727CFBA tail pipes
- T-304 stainless steel, Million-Mile Warranty
California Proposition 65. Borla's page carries this notice: welding, brazing or thermal cutting on this product can expose you to chemicals including chromium, nickel, cobalt, arsenic, cadmium and lead, which are known to the State of California to cause cancer, birth defects and other reproductive harm. The product as sold presents no hazard in its finished form. More at www.P65Warnings.ca.gov.
Fitment: 2021-2026 Ford F-150 Raptor, 3.5L V6, automatic transmission, 2WD and 4WD, crew cab with 5 ft 6 in short bed, 145.4 in. wheelbase. Borla lists the 3.5L Raptor only, not the Raptor R. Fitment confirmed against Borla's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor 3.5L V6, crew cab short bed (5 ft 6 in), 145.4 in. wheelbase |
This Borla 3 in. tail pipe kit puts a carbon fiber finish on the exhaust of the 2021-2026 Ford F-150 Raptor and 2023-2026 F-150 Raptor R. Every pipe ends in a single 4.5 in. round carbon fiber tip with a black anodized center.
Carbon fiber tips. The carbon fiber tips are the feature that sets this kit apart from Borla's black chrome and Brawler versions of the same tail pipe.
Expect more volume. Replacing original tail pipes that have resonators or resonated tips raises the sound level. Ultra-smooth mandrel bends keep exhaust flow moving freely through the pipe.
Premium stainless steel. The pipes are T-304 stainless steel, which Borla rates above T-400 series grades such as 409 for performance and durability. CNC manufacturing keeps the fit accurate, heat shields are included on the pipes, and each tail pipe is covered by Borla's Million-Mile Warranty.
Choose your mid-section. The kit fits with Borla mid-section / muffler assemblies 60728, 60736 or 60737, or with the original mid-section / muffler assembly.
Features
- Pipe diameter: 3 in. T-304 stainless steel
- Tips: single 4.5 in. round carbon fiber with black anodized centers
- Tip exit: truck single split rear exit
- Heat shields included on the pipes
- Fits with Borla 60728, 60736 or 60737 mid-sections, or the O.E. mid-section
- Black chrome and Brawler-style black coated tip versions are also offered by Borla
Prop 65 warning: operations such as welding or cutting on this product may expose you to chemicals including chromium, nickel, cobalt, arsenic, cadmium and lead, which are known to the State of California to cause cancer, birth defects and other reproductive harm.
Fitment: 2021-2026 Ford F-150 Raptor with the 3.5L V6 and 2023-2026 F-150 Raptor R with the 5.2L V8, automatic transmission, 2WD and 4WD, crew cab with the 5 ft 6 in. short bed (145.4 in. wheelbase). Fitment confirmed against Borla's published application list.
Guides & Manuals
Installation InstructionsInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor 3.5L V6, crew cab short bed |
| 2023-2026 | Ford | F-150 | Raptor R 5.2L V8, crew cab short bed |
Borla's 3 in. tail pipe kit with Brawler-style tips is made for the 2021-2026 Ford F-150 Raptor and the 2023-2026 F-150 Raptor R. The standout is the single 5 in. round angle-cut tip on each pipe, finished in a durable high-temperature black coating over T-304 stainless steel, with the Borla logo laser cut into the bottom wall of the tip.
A bold, angle-cut tip. Borla describes this as a unique Brawler style tip, and the 5 in. diameter with its angle cut sets this kit apart from the black chrome and carbon fiber versions of the same tail pipe.
Sound level goes up. Where these pipes replace original tail pipes with resonators or resonated tips, expect a louder exhaust. Ultra-smooth mandrel bends keep the flow path clean.
Stainless where it counts. The pipes are T-304 stainless steel, which Borla rates above T-400 series grades such as 409 for performance and durability. Heat shields are included on the pipes, CNC manufacturing keeps the fit accurate, and the Million-Mile Warranty covers each tail pipe.
Works with your exhaust. Pair the tail pipes with Borla mid-section / muffler assemblies 60728, 60736 or 60737, or keep the original mid-section / muffler assembly.
Features
- Pipe diameter: 3 in. T-304 stainless steel
- Tips: single 5 in. round Brawler style, angle cut, high-temperature black coating
- Laser-cut Borla logo in the bottom wall of each tip
- Tip exit: truck single split rear exit
- Heat shields included on the pipes
- Fits with Borla 60728, 60736 or 60737 mid-sections, or the O.E. mid-section
- Black chrome and carbon fiber tip versions are also offered by Borla
Prop 65 warning: operations such as welding or cutting on this product may expose you to chemicals including chromium, nickel, cobalt, arsenic, cadmium and lead, which are known to the State of California to cause cancer, birth defects and other reproductive harm.
Fitment: 2021-2026 Ford F-150 Raptor with the 3.5L V6 and 2023-2026 F-150 Raptor R with the 5.2L V8, automatic transmission, 2WD and 4WD, crew cab with the 5 ft 6 in. short bed (145.4 in. wheelbase). Fitment confirmed against Borla's published application list.
Guides & Manuals
Installation InstructionsInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor 3.5L V6, crew cab short bed |
| 2023-2026 | Ford | F-150 | Raptor R 5.2L V8, crew cab short bed |
These Borla 3 in. tail pipes replace the factory tail pipes on the 2021-2026 Ford F-150 Raptor and the 2023-2026 F-150 Raptor R. Each pipe finishes in a single 4.5 in. round black chrome tip on T-304 stainless steel, which gives the rear of the truck a dark, understated look.
Louder than the factory resonated pipes. When these pipes replace original tail pipes that have resonators or resonated tips, the sound level increases. Borla's mandrel bends keep the exhaust path smooth, so the added volume comes with strong flow.
Built to last. The pipes are T-304 stainless steel, which Borla rates above T-400 series grades such as 409 for performance and durability. CNC manufacturing keeps the fit accurate, heat shields are included on the pipes, and Borla backs each tail pipe with its Million-Mile Warranty.
Care for the black chrome tips. Borla does not recommend its Stainless Steel Polish (21499) on black chrome. Clean the tips with hot water and a microfiber cloth instead.
Choose your mid-section. The tail pipes fit with Borla mid-section / muffler assemblies 60728, 60736 or 60737, or with the original mid-section / muffler assembly.
Features
- Pipe diameter: 3 in. T-304 stainless steel
- Tips: single 4.5 in. round black chrome on T-304 stainless
- Tip exit: truck single split rear exit
- Heat shields included on the pipes
- Fits with Borla 60728, 60736 or 60737 mid-sections, or the O.E. mid-section
- Brawler-style black coated tips and carbon fiber tips are also offered by Borla
Prop 65 warning: operations such as welding or cutting on this product may expose you to chemicals including chromium, nickel, cobalt, arsenic, cadmium and lead, which are known to the State of California to cause cancer, birth defects and other reproductive harm.
Fitment: 2021-2026 Ford F-150 Raptor with the 3.5L V6 and 2023-2026 F-150 Raptor R with the 5.2L V8, automatic transmission, 2WD and 4WD, crew cab with the 5 ft 6 in. short bed (145.4 in. wheelbase). Fitment confirmed against Borla's published application list.
Guides & Manuals
Installation InstructionsInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor 3.5L V6, crew cab short bed |
| 2023-2026 | Ford | F-150 | Raptor R 5.2L V8, crew cab short bed |
The MBRP Armor BLK axle-back is a 3-inch, dual rear exit exhaust with black-coated turndown tails, made for the Ford F-150 Raptor (2022-2027, 3.5L EcoBoost HO) and the Raptor R (2023-2027, 5.2L supercharged). It is built from T304 stainless steel with an engineered high-heat black coating.
Black finish. The coating is a high-heat black finish. MBRP covers the black coating with a 1-year warranty against factory defects, and the rest of the system with its lifetime warranty.
Moderate tone. This is MBRP's street profile. The sound is described as moderate, so it adds a deeper voice without overwhelming cabin comfort.
Laser-welded turndown tails. The high-clearance tails turn downward to keep ground clearance for off-road use.
Bolt-on installation. Smooth mandrel-bent tubing with no rippling in the bends; the system includes the hardware and clamps needed.
Features
- 3-inch black-coated T304 stainless steel axle-back, dual rear exit
- Laser-welded high-clearance turndown tails
- Moderate exhaust tone, street profile
- Smooth mandrel-bent tubing, bolt-on installation
- Hardware and clamps included
- 1-year warranty on the finish, lifetime warranty on the rest
Emissions: California Proposition 65 warning applies. This is an exhaust-only part; check local rules for your area.
Fitment: 2022-2027 Ford F-150 Raptor (3.5L EcoBoost HO) and 2023-2027 Ford F-150 Raptor R (5.2L supercharged). Fitment confirmed against MBRP's published application list.
Guides & Manuals
Installation Instructions
Warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2027 | Ford | F-150 | Raptor |
| 2023-2027 | Ford | F-150 | Raptor R |
The MBRP Armor Pro axle-back is a 3-inch, dual rear exit exhaust with turndown tails, made for the Ford F-150 Raptor (2022-2027, 3.5L EcoBoost HO) and the Raptor R (2023-2027, 5.2L supercharged). It is built from T304 stainless steel and covered by MBRP's lifetime warranty.
Moderate tone. This is MBRP's street profile. The sound is described as moderate, so it adds a deeper voice without overwhelming cabin comfort.
Laser-welded turndown tails. The high-clearance tails turn downward to keep ground clearance for off-road use.
T304 stainless steel. The tubing resists corrosion and is mandrel bent with no rippling in the bends for good exhaust flow.
Bolt-on installation. The system installs as a bolt-on and includes the hardware and clamps needed.
Features
- 3-inch T304 stainless steel axle-back, dual rear exit
- Laser-welded high-clearance turndown tails
- Moderate exhaust tone, street profile
- Smooth mandrel-bent tubing, bolt-on installation
- Hardware and clamps included
- Lifetime MBRP warranty
Emissions: California Proposition 65 warning applies. This is an exhaust-only part; check local rules for your area.
Fitment: 2022-2027 Ford F-150 Raptor (3.5L EcoBoost HO) and 2023-2027 Ford F-150 Raptor R (5.2L supercharged). Fitment confirmed against MBRP's published application list.
Guides & Manuals
Installation Instructions
Warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2027 | Ford | F-150 | Raptor |
| 2023-2027 | Ford | F-150 | Raptor R |
The MBRP Armor Pro axle-back is a 3-inch, dual rear exit exhaust with carbon fiber tips for the Ford F-150 Raptor (2021-2027) and Raptor R (2023-2027). It is built from T304 stainless steel and covered by MBRP's lifetime warranty.
Street profile sound. This version is MBRP's street profile.
T304 stainless steel, lifetime warranty. MBRP describes T304 as the most durable material grade it offers. The tubing is easy to clean and maintain and suits trucks that operate in extreme conditions.
Mandrel-bent for flow. Smooth bends with no rippling keep exhaust gas moving, and the system installs as a bolt-on.
Carbon fiber tips included. The 5-inch OD carbon fiber tips come with the system.
Features
- 3-inch T304 stainless steel axle-back, dual rear exit
- 5-inch OD carbon fiber tips included
- Street profile sound
- Smooth mandrel-bent tubing, bolt-on installation
- Lifetime MBRP warranty
Emissions: California Proposition 65 warning applies. This is an exhaust-only part; check local rules for your area.
Fitment: 2021-2027 Ford F-150 Raptor (3.5L EcoBoost HO) and 2023-2027 Ford F-150 Raptor R (5.2L supercharged). Fitment confirmed against MBRP's published application list.
Guides & Manuals
Installation Instructions
Technical Drawing
Warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2027 | Ford | F-150 | Raptor |
| 2023-2027 | Ford | F-150 | Raptor R |
This EBC Stage 9 kit pairs Yellowstuff 4000 series pads with USR fine-slotted rotors for the front brakes of the 2021-2023 Ford F-150 Raptor, the 2023-2026 F-150 Raptor R and the 2022-2026 Bronco Raptor. It is EBC's most aggressive street-and-track kit in this family, supplied as one matched set for drivers who want more bite and better heat handling than a standard setup.
Matched pads and rotors. Yellowstuff is an aramid-fiber compound that works from cold and self-seats after installation thanks to its Brake-In surface coating. EBC's high-friction formula is described as improving braking by up to 40% over OE. The pad has a slotted face for cooling and for collecting dust and debris. The pad outline drawing lists a front pad roughly 192 mm long, 67.4 mm tall and 16 mm thick.
Rotors built for heat. The USR fine-slotted rotors expel gas, dust, debris and moisture more efficiently than a plain rotor, and they are rated to run at up to 800-900 degrees centigrade. A corrosion-resistant silver-gray coating extends service life, and each rotor is inspected and balanced for smooth running. BuyBrakes notes the kit has the thermal capacity for heavy vehicles and loads up to 8,000 pounds.
Right for the job. BuyBrakes lists the kit for performance street driving, street and track events and towing with oversized tires. It is a performance setup, so expect more brake dust than a standard pad.
- Yellowstuff 4000 series high-friction aramid-fiber pads
- Brake-In coating for fast bed-in
- USR fine-slotted vented rotors with corrosion-resistant coating
- Rotors inspected for runout and balanced
- Front axle kit: pads and rotors supplied together
Fitment: Ford F-150 Raptor 2021-2023 (3.5L), Ford F-150 Raptor R 2023-2026 (5.2L) and Ford Bronco Raptor 2022-2026 (3.0L), plus other Ford F-150 2021-2026 (2.7L, 3.0L, 3.5L, 5.0L, and 3.3L for 2021-2023; EBC notes 336 mm or 350 mm rear), Ford Expedition 2022-2024 and 2026 (3.5L) and Lincoln Navigator 2022-2024 (3.5L), as listed below. Fitment confirmed against EBC's published application list.
Guides & Manuals
Installation InstructionsWarranty Information
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2023 | Ford | F-150 | Raptor (3.5L) |
| 2023-2026 | Ford | F-150 | Raptor R (5.2L) |
| 2022-2026 | Ford | Bronco | Raptor (3.0L) |
| 2021-2026 | Ford | F-150 | 2.7L, 3.0L, 3.5L, 5.0L (336 mm or 350 mm rear) |
| 2021-2023 | Ford | F-150 | 3.3L (336 mm or 350 mm rear) |
| 2022-2024 | Ford | Expedition | 3.5L |
| 2026 | Ford | Expedition | 3.5L |
| 2022-2024 | Lincoln | Navigator | 3.5L |
This EBC Stage 15 kit pairs EBC Extra Duty pads with USR slotted rotors for the front brakes of the 2021-2023 Ford F-150 Raptor, the 2023-2026 F-150 Raptor R and the 2022-2026 Bronco Raptor. It is built for trucks that tow, haul and run big tires, and it arrives as one matched pad-and-rotor set.
Extra Duty pads for hard use. EBC developed the Extra Duty compound for unusually high friction that still behaves well on the street. Braking is strong from the first application, and the race-bred carbon-granule-based material is rated for effective stopping above 1,400 degrees F, well beyond what heavy braking, towing or long downhill descents normally produce. EBC describes it as rotor friendly and quiet.
Fine-slotted USR sport rotors. The rotors are USR fine-slotted G3000 sport rotors finished with a Geomet anti-rust coating, fully balanced and run-out tested for smooth braking. Front rotor: vented, 350 mm diameter, 34 mm thick (per BuyBrakes' listing); FMSI pad number D2382.
Steady under load. The kit is described as holding a stable friction coefficient under load and frequent snubbing, which suits towing and off-road driving. Expect more dust than a standard pad.
- EBC Extra Duty pads with USR fine-slotted G3000 sport rotors
- Stable friction under load and frequent snubbing; suited to towing and off-roading
- Effective above 1,400 degrees F
- Geomet anti-rust coating on the rotors
- Suited to extreme and fleet duty and towing with oversized tires (per BuyBrakes)
- Pad outline per EBC drawing: 192 x 67.4 x 16 mm
Fitment: Ford F-150 Raptor 2021-2023, F-150 Raptor R 2023-2026 and Bronco Raptor 2022-2026, plus other 2021-2026 F-150 engines, 2022-2024 and 2026 Expedition and 2022-2024 Lincoln Navigator as listed below. Fitment confirmed against EBC's published application list (EBC part finder).
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2023 | Ford | F-150 | Raptor (3.5L) |
| 2023-2026 | Ford | F-150 | Raptor R (5.2L) |
| 2022-2026 | Ford | Bronco | Raptor (3.0L) |
| 2021-2026 | Ford | F-150 | 2.7L, 3.0L, 3.5L, 5.0L (336 mm or 350 mm rear discs) |
| 2021-2023 | Ford | F-150 | 3.3L (336 mm or 350 mm rear discs) |
| 2022-2024, 2026 | Ford | Expedition | 3.5L |
| 2022-2024 | Lincoln | Navigator | 3.5L |
- Choosing a selection results in a full page refresh.
- Opens in a new window.