Welcome to RaptorsOnly.com
-
Brands
Shop by brand
- 3D MAXpider
- Access
- Addictive Desert Designs
- Advan
- AEM Induction
- aFe
- Air Lift
- Airaid
- Alcon
- AlphaRex
- AMP Research
- AMS
- Anderson Composites
- ANZO
- ARB
- Atturo Tire
- AutoMeter
- AVS
- AWE Tuning
- BackRack
- Baer Brakes
- Baja Designs
- BAK
- Banks Power
- BBK
- BBS
- BD Diesel
- Belltech
- Bestop
- BFGoodrich
- BMC
- Body Armor 4x4
- Borla
- Brembo
- Brembo OE
- Bully Dog
- Bushwacker
- Camburg
- Clevite
- COBB
- Cometic Gasket
- COMP Cams
- CORSA Performance
- Covercraft
- CSF
- DBA
- DeatschWerks
- DFC
- Diode Dynamics
- DS18
- DV8 Offroad
- Eaton
- EBC
- Eibach
- Enkei
- Extang
- Fabtech
- Fel-Pro
- fifteen52
- Firestone
- Flowmaster
- Ford Racing
- Forgestar
- FORM Lighting
- FOX
- Garrett
- Gates
- GEN-Y Hitch
- Go Fast Bits
- Go Rhino
- Gram Lights
- Granatelli Motor Sports
- GSC Power Division
- Hawk Performance
- Hella
- Hellwig
- Hotchkis
- Husky Liners
- ICON
- Injen
- J&L
- JBA
- JLT
- K&N Engineering
- KC HiLiTES
- King Engine Bearings
- King Shocks
- Kleinn Air Horns
- Kooks Headers
- KYB
- LIQUI MOLY
- LUND
- Magnaflow
- Mahle OE
- Maxtrac
- Mayhem
- MBRP
- McGard
- Method Wheels
- MGP
- Michelin
- Mickey Thompson
- Mishimoto
- Moog
- Motul
- MTX Wheels
- N-Fab
- Nacho Offroad Technology
- NGK
- Nitrous Express
- Odyssey Battery
- ORACLE Lighting
- PowerStop
- Putco
- QA1
- Raceline
- Radium Engineering
- Rally Armor
- Rampage
- Raxiom
- Retrax
- Rhino-Rack
- Ridetech
- Rigid Industries
- Rival 4x4
- RockJock
- Roll-N-Lock
- Roush
- Royal Purple
- SCT Performance
- Skyjacker
- Snow Performance
- SPC Performance
- SPOD
- Stainless Works
- Superlift
- Superpro
- Timbren
- Torque Solution
- TOYO
- Truxedo
- Tuff Country
- Turbosmart
- UMI Performance
- Undercover
- Volant
- Vossen
- Wagner Tuning
- WeatherTech
- Weld
- Westin
- Whiteline
- Wilwood
- Yokohama Tire
- Yukon Gear & Axle
- Zone Offroad
No brands found. Try another name or initial.
156 brands
View all brands -
F-150 Raptor
- F-150 Raptor
-
1st Gen (2010-2014)
-
2nd Gen (2017-2020)
-
3rd Gen (2021-Present)
-
Raptor R (2023-Present)
-
Bronco Raptor
- Bronco Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
-
Ranger Raptor
- Ranger Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
Your cart
You'll love this too
Discount invalid. Please make sure the discount details are correct.
Discount code is already applied.
Discount applied!
Subheading
Product comparison
Describe you product comparison grid
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
F-150 Raptor 3rd Gen
Choose a department to narrow the parts below.
Suspension
Lighting
Bumpers & Armor
Racks
Interior Accessories
Exterior Accessories
Performance
Wheels & Tires
Brakes
Drivetrain
Engine & Cooling
816 products
816 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$23.99
Overview Introducing LED License Plate Lights from Form Lighting! If you are looking to add a modern appearance to your vehicle, upgrading your License Plate Lights is one of the easiest things you can do to make a big impact. Increased Output. Thanks to the full LED housings, these lamps provide a serious upgrade in output with 6000K Cool White LED chips. With these premium OE-grade replacements, you’ll stand out from the crowd with an extremely modern look. More Modern Appearance. On top of the output upgrade, these lamps are also an improvement in style. Incandescent yellow bulbs are a thing of the past, and our new License Plate Lights are here to help to bridge that gap. OEM-Grade Construction. Form Lighting License Plate Lights are built with quality in mind and constructed using OEM-grade materials, including a UV-coated polycarbonate lens, automotive-grade LEDs and optics, and direct-fit connectors. Unlike other options on the market, each lamp features transient protection which prevents voltage spikes on the circuit board, ensuring long-term reliability. While they may not be the cheapest option on the market, the fit and finish of our lamps are superior to other aftermarket units. Plug-and-Play. Our LED License Plate Lights are completely plug-and-play and will fit perfectly, without any body gaps. Simply take the factory housing out and reinstall. They were designed to plug into your factory connector, with no additional wiring needed. There are no errors, or flickering. Two-Year Warranty. All Form Lighting products are rigorously tested for reliability, and backed by a two-year warranty. The warranty is supported directly by Form Lighting’s US warehouse.
- Form Lighting License Plate Lights are built with quality in mind and constructed using OEM-grade materials
- These lamps provide a serious upgrade in style and output with 6000K Cool White LED chips
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2023 | Ford | F-150 | King Ranch |
| 2015-2023 | Ford | F-150 | Lariat |
| 2016-2023 | Ford | F-150 | Limited |
| 2015-2023 | Ford | F-150 | Platinum |
| 2018-2023 | Ford | F-150 | Police Responder |
| 2017-2023 | Ford | F-150 | Raptor |
| 2016-2023 | Ford | F-150 | SSV |
| 2021-2023 | Ford | F-150 | Tremor |
| 2015-2023 | Ford | F-150 | XL |
| 2015-2023 | Ford | F-150 | XLT |
$40.00
Fits all 2021+ F-150 2WD and 4WD Regular Cab, SuperCab, and SuperCrew.
- Low-Profile Rocker Panel Guards To Replace Existing
- Original Equipment On Tremor Package
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | F-150 | King Ranch |
| 2021-2025 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2025 | Ford | F-150 | Platinum |
| 2021-2025 | Ford | F-150 | Police Responder |
| 2022,2024-2025 | Ford | F-150 | Raptor |
| 2021-2025 | Ford | F-150 | SSV |
| 2024-2025 | Ford | F-150 | STX |
| 2021-2025 | Ford | F-150 | Tremor |
| 2021-2025 | Ford | F-150 | XL |
| 2021-2025 | Ford | F-150 | XLT |
$850.05
This Ford Racing calibration reflashes the engine computer on your 2024-2026 F-150 Raptor for more power and sharper throttle response. It is delivered with the ProCal 4 tool that loads it.
Power and torque. Ford quotes 466 horsepower and 554 lb-ft of torque from the 3.5L EcoBoost, with improved throttle response through the rpm range.
ProCal 4 tool included. The ProCal tool loads the tune, and it can also read and clear diagnostic trouble codes.
Warranty. Ford backs it with a 3-year/36,000-mile warranty from the vehicle in-service date when installed by a Ford dealer or an ASE/Red Seal certified technician. Contact the Ford Racing Parts Tech-line for warranty registration. For US and Canada vehicles only.
Features
- Peak power 466 hp; peak torque 554 lb-ft
- Improved throttle response throughout the rpm range
- ProCal 4 delivery tool (M-12655-F) included
- 3-year/36,000-mile warranty
Emissions
2024 models: 50-state approved, CARB Executive Order D-431-12. 2025 models: 50-state approved, CARB Executive Order D-431-17. 2026 models: non-California vehicles only. California Prop 65 warning applies.
Fitment: 2024-2026 Ford F-150 Raptor. Fitment confirmed against Ford Performance's published application list.
Guides & Manuals
ProCal 4 Delivery Tool Instructions (M-12655-F)This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | F-150 | Raptor |
$850.00
This Ford Racing calibration reflashes the engine computer on your 2021-2023 F-150 Raptor for more power and sharper throttle response. It is delivered with the ProCal 4 tool that loads it.
Power and torque. Ford quotes 466 horsepower and 554 lb-ft of torque from the 3.5L EcoBoost, with improved throttle response through the rpm range.
ProCal 4 tool included. The ProCal tool loads the tune, and it can also read and clear diagnostic trouble codes. Premium fuel is required for maximum performance.
Warranty. Ford backs it with a 3-year/36,000-mile warranty from the vehicle in-service date when installed by a Ford dealer or an ASE/Red Seal certified technician. Contact the Ford Racing Parts Tech-line for warranty registration. For US and Canada vehicles only.
Features
- Peak power 466 hp; peak torque 554 lb-ft
- Improved throttle response throughout the rpm range
- ProCal 4 delivery tool (M-12655-F) included
- 3-year/36,000-mile warranty
Emissions
50-state approved, CARB Executive Order D-431-12.
Fitment: 2021-2023 Ford F-150 Raptor. Fitment confirmed against Ford Performance's published application list.
Guides & Manuals
ProCal 4 Delivery Tool Instructions (M-12655-F)This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2023 | Ford | F-150 | Raptor |
$360.00
Transform your F-150 with this Black Painted Grille and gain a more sporty, menacing appearance.
- Simple upgrade and install
- Ford Oval sold separately
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2023 | Ford | F-150 | King Ranch |
| 2018-2023 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2023 | Ford | F-150 | Platinum |
| 2021-2023 | Ford | F-150 | Police Responder |
| 2021-2023 | Ford | F-150 | Raptor |
| 2021-2023 | Ford | F-150 | SSV |
| 2021-2023 | Ford | F-150 | Tremor |
| 2018-2023 | Ford | F-150 | XL |
| 2018-2023 | Ford | F-150 | XLT |
$650.00
Get the undercarriage protection you need for your new Raptor with the same skid plates that were used on the 2017 Ford Raptor Race truck. The Ford Performance Skid Plate Kit protects the transmission and transfer case from undercarriage rock damage. Made from powder coated 3/16 thick aluminum and designed to bolt on and fit the truck perfectly.
- Replaces Factory Front Air Dam w/Durable; Steel Front Bash Plate Finished In Silver
- Reference Instruction Sheet To Verify 2021 My Vehicle Fitment
- Fits All 2022 Plus F-150 4X4 Equipped Vehicles
- Fits 2021 F-150 4X4 Built After June 2021
- Factory Equipment On F-150 Tremor Package
- Steel Front Bash Plate Finished In Silver
- Replaces Factory Front Air Dam w/Durable
- Not Compatible With F-150 Lightning
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2023 | Ford | F-150 | King Ranch |
| 2021-2023 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2023 | Ford | F-150 | Platinum |
| 2021-2023 | Ford | F-150 | Police Responder |
| 2021-2023 | Ford | F-150 | Raptor |
| 2021-2023 | Ford | F-150 | SSV |
| 2021-2023 | Ford | F-150 | Tremor |
| 2021-2023 | Ford | F-150 | XL |
| 2021-2023 | Ford | F-150 | XLT |
$730.00
These Ford Racing Torsen differentials use a worm gear friction system that will not wear out like conventional clutch-type positive traction differentials. These differentials ensure your engine's power is transferred to the wheels with the maximum traction. The unique torque-sensing ability of the Torsen design, and the smooth engagement of Torsen-style limed slip differentials, make them the perfect choice for your street, strip, or off-road vehicle.
- Responds Immediately To Variable Driving
- Full Time Torque Sensing And Biasing
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2004-2014 | Ford | F-150 | FX4 |
| 2006-2008 | Ford | F-150 | Harley-Davidson Edition |
| 2005-2025 | Ford | F-150 | King Ranch |
| 2004-2025 | Ford | F-150 | Lariat |
| 2011 | Ford | F-150 | Lariat Limited |
| 2013-2014,2016-2023 | Ford | F-150 | Limited |
| 2009-2025 | Ford | F-150 | Platinum |
| 2018-2025 | Ford | F-150 | Police Responder |
| 2018-2025 | Ford | F-150 | Raptor |
| 2016-2025 | Ford | F-150 | SSV |
| 2004-2014,2024-2025 | Ford | F-150 | STX |
| 2008 | Ford | F-150 | THE 60TH ANNIVERSARY EDITION |
| 2021-2025 | Ford | F-150 | Tremor |
| 2004-2025 | Ford | F-150 | XL |
| 2004-2025 | Ford | F-150 | XLT |
$315.00
Ford Performance branded differential cover. Rugged powdercoat finish.
- Rear Differential Cover
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1997-2000 | Ford | F-150 | Base |
| 2007-2008,2010-2013 | Ford | F-150 | FX2 |
| 2004-2014 | Ford | F-150 | FX4 |
| 2000-2003,2006-2008,2010-2012 | Ford | F-150 | Harley-Davidson Edition |
| 2001-2003,2005-2025 | Ford | F-150 | King Ranch |
| 1997-2025 | Ford | F-150 | Lariat |
| 2011 | Ford | F-150 | Lariat Limited |
| 1999-2003 | Ford | F-150 | Lightning |
| 2008,2019-2023 | Ford | F-150 | Limited |
| 2009-2025 | Ford | F-150 | Platinum |
| 2019-2025 | Ford | F-150 | Police Responder |
| 2019-2025 | Ford | F-150 | Raptor |
| 2016-2025 | Ford | F-150 | SSV |
| 2004-2014,2024-2025 | Ford | F-150 | STX |
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2008 | Ford | F-150 | THE 60TH ANNIVERSARY EDITION |
| 2021-2025 | Ford | F-150 | Tremor |
| 1997-2025 | Ford | F-150 | XL |
| 1997-2025 | Ford | F-150 | XLT |
$630.00
This is the Raptor steering wheel with its defined grips and aggressive shape, wrapped in black leather with a red sightline. Ford sells it as a kit with everything needed to install it.
Black leather with a red sightline. The wheel has black stitching and a red leather sightline at 12 o'clock.
Complete kit. It comes with the wire harness, trim bezel and Raptor steering wheel controls, and it is a heated wheel with all needed installation hardware.
Know before you buy. Installing it in a non-Raptor F-150, or in a Raptor with the Technology Package, means moving the controls over from the original wheel. It will not fit F-150s with Adaptive Steering. The heat will not work on trucks without the heated wheel option, and paddle shifters will not work on trucks that did not have them from the factory.
Features
- Black leather with black stitching and red leather sightline
- Wire harness, trim bezel and Raptor steering wheel controls
- Heated steering wheel with installation hardware
Fitment: 2021-2023 Ford F-150 Raptor. Fitment confirmed against Ford Performance's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2023 | Ford | F-150 | Raptor |
| 2021-2023 | Ford | F-150 | Other trims (controls swap needed on non-Raptor trucks) |
$1,670.00
This gloss carbon fiber panel replaces the rear tailgate panel on your F-150 Raptor. It gives the back of the truck a woven carbon look and keeps the Ford lettering.
Real carbon fiber. Ford builds the panel from 3K, 2x2 twill carbon fiber cloth in an autoclave and finishes it in gloss.
Direct replacement. It replaces the OE component and the kit includes the Ford and Raptor emblems plus all required fasteners, hardware and installation materials.
Part of a set. Ford also offers the panel in matte (M-16600-FM) and a complete carbon fiber gloss kit (M-16600K-FG).
Features
- Carbon fiber tailgate panel
- Ford and Raptor emblems included
- Gloss finish; 3K 2x2 twill carbon fiber
- Fasteners, hardware and installation materials included
Fitment: 2021-2027 Ford F-150 Raptor and 2023-2027 F-150 Raptor R with factory-equipped tailgate panel. Fitment confirmed against Ford Performance's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2027 | Ford | F-150 | Raptor (with factory equipped tailgate panel) |
| 2023-2027 | Ford | F-150 | Raptor R (with factory equipped tailgate panel) |
$115.00
For more than 35 years Ford Performance Parts has been producing and developing performance parts with enthusiasts in mind. Whether you are building from the ground up or working to get that extra tenth of a second, Ford Performance delivers the products you need.
- Door Sill Protector
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2024 | Ford | F-150 | King Ranch |
| 2015-2024 | Ford | F-150 | Lariat |
| 2016-2023 | Ford | F-150 | Limited |
| 2015-2024 | Ford | F-150 | Platinum |
| 2018-2024 | Ford | F-150 | Police Responder |
| 2017-2025 | Ford | F-150 | Raptor |
| 2016-2024 | Ford | F-150 | SSV |
| 2024 | Ford | F-150 | STX |
| 2021-2024 | Ford | F-150 | Tremor |
| 2015-2024 | Ford | F-150 | XL |
| 2015-2024 | Ford | F-150 | XLT |
$1,330.00
This pair of gloss carbon fiber fender vents replaces the factory vents on your F-150 Raptor. They add a real carbon fiber look to the fenders without changing how the truck is built.
Real carbon fiber. Ford makes the vents from 3K, 2x2 twill carbon fiber cloth using an autoclave process, then finishes them in gloss.
Direct replacement. The vents replace the OE components, and the kit includes the left and right vents plus all required fasteners, hardware and installation materials.
Match the rest of the truck. The same carbon fiber is also offered in a matte finish (M-16026-FM) and as a complete gloss kit (M-16600K-FG).
Features
- Carbon fiber right and left fender vent set
- Gloss finish; 3K 2x2 twill carbon fiber
- Autoclave-produced
- Fasteners, hardware and installation materials included
Fitment: 2021-2027 Ford F-150 Raptor and 2023-2027 Ford F-150 Raptor R. Fitment confirmed against Ford Performance's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2027 | Ford | F-150 | Raptor |
| 2023-2027 | Ford | F-150 | Raptor R |
$165.00
Ford Oval Emblem; Black; w/ Camera provision; Front/Rear Smoked Chrome;
- Incl. Front Smoked Chrome Oval w/ Camera Provision
- Also Fits 2022 F-150 Lightning Pro/XLT Series
- Requires Vehicle w/ 360 Camera Package Option
- Incl. Rear Smoked Chrome Oval
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2023 | Ford | F-150 | King Ranch |
| 2021-2023 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2023 | Ford | F-150 | Platinum |
| 2021-2022 | Ford | F-150 | Police Responder |
| 2022 | Ford | F-150 | Raptor |
| 2021-2022 | Ford | F-150 | SSV |
| 2021-2022 | Ford | F-150 | Tremor |
| 2021-2023 | Ford | F-150 | XL |
| 2021-2023 | Ford | F-150 | XLT |
| 2022 | Ford | F-150 Lightning | Pro |
| 2022 | Ford | F-150 Lightning | XLT |
$140.00
Ford Oval Emblem; Black; w/o Camera; Incl. Front/Rear Smoked Chrome Oval;
- Incl. Front Smoked Chrome Oval w/o Camera Provision
- Does Not Fit Base XL/XLT Models
- Incl. Rear Smoked Chrome Oval
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018-2022 | Ford | F-150 | King Ranch |
| 2018-2023 | Ford | F-150 | Lariat |
| 2018-2022 | Ford | F-150 | Limited |
| 2018-2022 | Ford | F-150 | Platinum |
| 2018-2022 | Ford | F-150 | Police Responder |
| 2022 | Ford | F-150 | Raptor |
| 2018-2022 | Ford | F-150 | SSV |
| 2021-2022 | Ford | F-150 | Tremor |
| 2018-2023 | Ford | F-150 | XL |
| 2018-2023 | Ford | F-150 | XLT |
$145.00
This Ford Racing kit supplies four valve-mounted tire pressure sensors and the tool that activates them. It is the right pick when you add wheels that need their own sensors.
Four snap-in sensors. The kit contains four valve-mounted, snap-in tire pressure monitor sensors and four rubber valve stems.
Activation tool included. Failure to install and activate the sensors leaves the tire pressure light on. The same tool can retrain the sensors after a tire rotation.
Wheel requirement. Ford warns the kit needs wheels designed for valve-mounted, snap-in sensors.
Features
- 4 valve-mounted snap-in tire pressure monitor sensors
- 4 rubber valve stems
- Tire pressure monitor sensor activation tool
Emissions
California Prop 65 warning applies to this product.
Fitment: 2017-2023 Ford F-150 Raptor, plus the other vehicles in the table below. Fitment confirmed against Ford Performance's published application list.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2023 | Ford | Mustang | All |
| 2015-2023 | Ford | F-150 | All |
| 2017-2023 | Ford | F-150 | Raptor |
| 2021-2024 | Ford | Bronco Sport | All |
$26.00
Wheel Center Cap Kit; Chrome Ford Logo Gloss Black Background; Set Of 4;
- As Used On Several Current Production Ford Truck And SUV Models
- Chrome Ford Logo On A Gloss Black Background
- Sold As A Set Of Four Center Caps
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018-2020 | Ford | EcoSport | S |
| 2018-2020 | Ford | EcoSport | SE |
| 2018-2020 | Ford | EcoSport | SES |
| 2018-2020 | Ford | EcoSport | Titanium |
| 2008-2014 | Ford | Edge | Limited |
| 2007-2020 | Ford | Edge | SE |
| 2007-2020 | Ford | Edge | SEL |
| 2007 | Ford | Edge | SEL Plus |
| 2009-2018 | Ford | Edge | Sport |
| 2019-2020 | Ford | Edge | ST |
| 2015-2020 | Ford | Edge | Titanium |
| 2005-2012 | Ford | Escape | Hybrid |
| 2003-2012 | Ford | Escape | Limited |
| 2009-2012 | Ford | Escape | Limited Hybrid |
| 2013-2020 | Ford | Escape | S |
| 2013-2020 | Ford | Escape | SE |
| 2013,2018-2020 | Ford | Escape | SEL |
| 2013-2020 | Ford | Escape | Titanium |
| 2020 | Ford | Escape | Titanium Hybrid |
| 2001-2012 | Ford | Escape | XLS |
| 2001-2012 | Ford | Escape | XLT |
| 2005 | Ford | Escape | XLT No Boundaries |
| 2005 | Ford | Escape | XLT Sport |
| 2003-2005 | Ford | Excursion | Eddie Bauer |
| 2000-2005 | Ford | Excursion | Limited |
| 2004-2005 | Ford | Excursion | XLS |
| 2000-2005 | Ford | Excursion | XLT |
| 2000-2010 | Ford | Expedition | Eddie Bauer |
| 2007-2010 | Ford | Expedition | EL Eddie Bauer |
| 2008-2017 | Ford | Expedition | EL King Ranch |
| 2007-2017 | Ford | Expedition | EL Limited |
| 2015-2017 | Ford | Expedition | EL Platinum |
| 2016-2017 | Ford | Expedition | EL SSV |
| 2011-2017 | Ford | Expedition | EL XL |
| 2007-2017 | Ford | Expedition | EL XLT |
| 2008 | Ford | Expedition | Funkmaster Flex Edition |
| 2006,2008-2017,2020 | Ford | Expedition | King Ranch |
| 2005-2020 | Ford | Expedition | Limited |
| 2020 | Ford | Expedition | Max King Ranch |
| 2018-2020 | Ford | Expedition | Max Limited |
| 2018-2020 | Ford | Expedition | Max Platinum |
| 2018-2019 | Ford | Expedition | Max XL |
| 2004 | Ford | Expedition | NBX |
| 2015-2020 | Ford | Expedition | Platinum |
| 2016-2020 | Ford | Expedition | SSV |
| 2011-2019 | Ford | Expedition | XL |
| 2004-2006 | Ford | Expedition | XLS |
| 2000-2020 | Ford | Expedition | XLT |
| 2004,2006 | Ford | Expedition | XLT Sport |
| 2011-2020 | Ford | Explorer | Base |
| 2000-2010 | Ford | Explorer | Eddie Bauer |
| 2000-2020 | Ford | Explorer | Limited |
| 2020 | Ford | Explorer | Limited Hybrid |
| 2004 | Ford | Explorer | NBX |
| 2016-2020 | Ford | Explorer | Platinum |
| 2000,2013-2019 | Ford | Explorer | Sport |
| 2020 | Ford | Explorer | ST |
| 2000-2001 | Ford | Explorer | XL Fleet |
| 2000-2006 | Ford | Explorer | XLS |
| 2004-2005 | Ford | Explorer | XLS Sport |
| 2000-2020 | Ford | Explorer | XLT |
| 2004-2005 | Ford | Explorer | XLT Sport |
| 2001-2002 | Ford | Explorer Sport | Base |
| 2003 | Ford | Explorer Sport | XLS |
| 2003 | Ford | Explorer Sport | XLT |
| 2000 | Ford | F-150 | Base |
| 2007-2008,2010-2014 | Ford | F-150 | FX2 |
| 2004-2014 | Ford | F-150 | FX4 |
| 2000-2003,2006-2008,2010-2012 | Ford | F-150 | Harley-Davidson Edition |
| 2001-2003,2005-2025 | Ford | F-150 | King Ranch |
| 2000-2025 | Ford | F-150 | Lariat |
| 2011 | Ford | F-150 | Lariat Limited |
| 2000-2003 | Ford | F-150 | Lightning |
| 2008,2013-2014,2016-2023 | Ford | F-150 | Limited |
| 2009-2025 | Ford | F-150 | Platinum |
| 2018-2025 | Ford | F-150 | Police Responder |
| 2017-2025 | Ford | F-150 | Raptor |
| 2016-2025 | Ford | F-150 | SSV |
| 2004-2014,2024-2025 | Ford | F-150 | STX |
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2008 | Ford | F-150 | THE 60TH ANNIVERSARY EDITION |
| 2021-2025 | Ford | F-150 | Tremor |
| 2000-2025 | Ford | F-150 | XL |
| 2000-2025 | Ford | F-150 | XLT |
| 2004 | Ford | F-150 Heritage | SVT Lightning |
| 2004 | Ford | F-150 Heritage | XL |
| 2004 | Ford | F-150 Heritage | XLT |
| 2009-2010 | Ford | F-250 Super Duty | Cabela's |
| 2008-2009 | Ford | F-250 Super Duty | FX4 |
| 2004-2010 | Ford | F-250 Super Duty | Harley-Davidson Edition |
| 2004-2020 | Ford | F-250 Super Duty | King Ranch |
| 2000-2020 | Ford | F-250 Super Duty | Lariat |
| 2018-2020 | Ford | F-250 Super Duty | Limited |
| 2013-2020 | Ford | F-250 Super Duty | Platinum |
| 2000-2020 | Ford | F-250 Super Duty | XL |
| 2000-2020 | Ford | F-250 Super Duty | XLT |
| 2009-2010 | Ford | F-350 Super Duty | Cabela's |
| 2008-2009 | Ford | F-350 Super Duty | FX4 |
| 2004-2010 | Ford | F-350 Super Duty | Harley-Davidson Edition |
| 2003-2020 | Ford | F-350 Super Duty | King Ranch |
| 2000-2020 | Ford | F-350 Super Duty | Lariat |
| 2018-2020 | Ford | F-350 Super Duty | Limited |
| 2013-2020 | Ford | F-350 Super Duty | Platinum |
| 2000-2020 | Ford | F-350 Super Duty | XL |
| 2000-2020 | Ford | F-350 Super Duty | XLT |
| 2009-2019 | Ford | Flex | Limited |
| 2009-2019 | Ford | Flex | SE |
| 2009-2019 | Ford | Flex | SEL |
| 2011-2012 | Ford | Flex | Titanium |
| 2005-2007 | Ford | Freestyle | Limited |
| 2005-2006 | Ford | Freestyle | SE |
| 2005-2007 | Ford | Freestyle | SEL |
| 2013-2020 | Ford | Police Interceptor Utility | Base |
| 2001-2005 | Ford | Ranger | Edge |
| 2000-2002 | Ford | Ranger | EV |
| 2005-2009 | Ford | Ranger | FX4 |
| 2019-2020 | Ford | Ranger | Lariat |
| 2002 | Ford | Ranger | Postal |
| 2006-2011 | Ford | Ranger | Sport |
| 2005-2007 | Ford | Ranger | STX |
| 2004 | Ford | Ranger | Tremor |
| 2000-2011,2019-2020 | Ford | Ranger | XL |
| 2000-2011,2019-2020 | Ford | Ranger | XLT |
| 2008-2009 | Ford | Taurus X | Eddie Bauer |
| 2008-2009 | Ford | Taurus X | Limited |
| 2008-2009 | Ford | Taurus X | SEL |
$865.00
This Ford Racing kit supplies a full set of four functional bead lock rings for Raptors fitted with the factory bead lock wheel. Each ring bolts on with its own 24 fasteners.
A complete set for all four wheels. The kit contains four functional bead lock rings, so one order covers the truck.
Matched to factory wheels. Ford lists it for the 2021-2027 F-150 Raptor with factory bead lock wheel option 64D and 35-inch tires, the 2017-2018 F-150 Raptor with 64D, and the 2024-2027 Ranger Raptor with its factory bead lock wheel option.
Off-road use only. Ford states the bead lock configuration is for off-road use only. For the Bronco, Ford points to kit M-1021K-BL5.
Features
- Set of 4 functional bead lock rings
- 24 fasteners per ring
- Off-road use only; suitable for overlanding
Fitment: 2017-2018 and 2021-2027 Ford F-150 Raptor and 2024-2027 Ford Ranger Raptor with factory bead lock wheels. Fitment confirmed against Ford Performance's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2027 | Ford | F-150 | Raptor (factory bead lock wheel option 64D, 35in tire) |
| 2017-2018 | Ford | F-150 | Raptor (factory bead lock wheel option 64D) |
| 2024-2027 | Ford | Ranger | Raptor (factory bead lock wheel option) |
$230.00
The Ford Racing Raptor bead lock ring is a forged aluminum ring that bolts to a factory bead lock wheel. It gives the wheel the clamped-bead look and off-road function of Ford's own bead lock option.
Forged aluminum construction. The ring is made from forged aluminum and arrives with 24 fasteners and mounting instructions.
Made for factory bead lock wheels. Ford lists it for Raptors with the factory bead lock wheel option: 64D on the F-150 Raptor, 642 on the Bronco Raptor, and the factory bead lock wheel on the 2024-2027 Ranger Raptor.
Off-road use only. Ford states the bead lock configuration is for off-road use only. On the 2021-2027 F-150 Raptor the listing calls for the 35-inch tire.
Features
- Forged aluminum bead lock ring
- 24 fasteners included
- Mounting instructions included
- For off-road use only; suitable for overlanding
Fitment: 2021-2027 and 2017-2018 Ford F-150 Raptor, 2022-2027 Bronco Raptor and 2024-2027 Ranger Raptor with the factory bead lock wheel option, plus the Bronco entry in the table below. Fitment confirmed against Ford Performance's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2027 | Ford | Bronco | With factory bead lock capable wheels |
| 2022-2027 | Ford | Bronco | Raptor (factory bead lock cast wheel option 642) |
| 2021-2027 | Ford | F-150 | Raptor (factory bead lock wheel option 64D, 35in tire) |
| 2017-2018 | Ford | F-150 | Raptor (factory bead lock wheel option 64D) |
| 2024-2027 | Ford | Ranger | Raptor (factory bead lock wheel option) |
$210.00
This Ford Racing lug nut kit gives your Raptor a clean black chrome finish at all four corners. It includes 24 lug nuts for M14 x 1.5 wheel studs, enough to fit a truck with a full set of wheels.
Black chrome finish. The coating resists scratches and wear, so the nuts keep their look under hard off-road use.
Sized for M14 x 1.5 studs. Ford lists the kit for the F-150, F-150 Raptor, Expedition, Navigator and Bronco Raptor.
Hand tools recommended. Ford advises installing and removing these nuts by hand with non-marring lug nut sockets to avoid damaging the finish.
Features
- Vehicle kit contains 24 lug nuts
- Black chrome finish
- Fits M14 x 1.5 wheel studs
- Scratch- and wear-resistant coating
Fitment: 2017-2027 Ford F-150 Raptor and 2022-2027 Ford Bronco Raptor, plus the other vehicles in the table below. Fitment confirmed against Ford Performance's published application list.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2027 | Ford | F-150 | All |
| 2017-2027 | Ford | F-150 | Raptor |
| 2018-2027 | Ford | Expedition | All |
| 2018-2027 | Lincoln | Navigator | All |
| 2022-2027 | Ford | Bronco | Raptor |
The Eibach Pro-Lift-Kit HD is a set of four coil springs (front and rear) made for the 2021-2026 Ford F-150 Raptor with the 3.5L EcoBoost V6 and 4WD. It raises the stance of the truck for extra ground clearance and room for larger wheels and tires, while the heavy-duty rear springs are built to hold that height when you load the truck down. It is listed for both 35in and 37in applications.
Lift that holds up under load. The HD rear springs carry a higher spring rate than Eibach's standard lift springs. That helps the rear keep its intended ride height with cargo, a bed rack, a camper or other accessories, without air bags, spring spacers or an overly stiff spring. Eibach designs the rear to be run at fully loaded height; the other rear heights it lists are for reference only, and its rear lift figures span 0 to 500 lbs of load. Too much lift will cause poor ride quality, so choose the height that suits how you use the truck.
Built to work with the factory shocks. This kit is designed to use the OE FOX electronic shocks, so you keep the Raptor's factory damping hardware instead of replacing it.
Made in the U.S.A. Eibach builds these springs in the United States and backs them with a five-year warranty against defects in material and workmanship, other than coatings, under normal use.
Features
- Set of 4 springs: front and rear
- Heavy-duty rear springs for loaded ride height
- Added ground clearance
- More fender clearance for larger wheels and tires
- Improved on-road stability and handling
- Designed for OE FOX electronic shocks
- Made in the U.S.A.
Emissions
Prop 65 warning applies to this product. No CARB EO number is listed for it.
Fitment: 2021-2026 Ford F-150 Raptor, 3.5L V6 EcoBoost, 4WD, 3rd generation, for 35in and 37in applications. Eibach does not guarantee fitment, height or warranty on unlisted applications. Fitment confirmed against Eibach's published application list.
Guides & Manuals
Installation Instructions D4099Installation Instructions D4156
Warranty
Installation Instructions
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
These Eibach Pro-Lift-Kit HD rear springs are a pair of heavy-duty coil springs built for third-generation Ford F-150 Raptor and F-150 Raptor R trucks that carry extra weight over the rear axle. They are a drop-in replacement for the factory rear coils and are sold as rear springs only.
Holds ride height under load. Gear, a loaded bed, a camper or a rear bumper and winch all push a Raptor's tail down. These springs add rate where it is needed to bring the rear back up to its intended height, without air bags, spring spacers or an overly stiff spring rate.
Built for the factory electronic shocks. Eibach designed this spring to work with the OE FOX electronic shocks. Eibach lists the rear lift as a range from an unloaded truck up to about 500 lb of added weight, and says the kit is meant to be run at its fully loaded height. Too much lift will cause poor ride quality.
Works with other Eibach lift parts. The HD rear springs are intended for use alongside Eibach's Pro-Lift-Kit components and Eibach shocks. A 35 in or 37 in tire setup is listed in Eibach's application data for the F-150 Raptor.
Made in the U.S.A. with a five-year warranty. Eibach covers these springs against factory defects in material and workmanship (coatings excluded) when used on passenger cars and light-duty class 1-3 trucks under normal conditions.
Features
- Pair of two heavy-duty rear coil springs
- Drop-in fit, no air bags or spacers needed
- Designed to control increased payloads
- Designed around OE FOX electronic shocks
- Engineered for off-road use
- Made in the U.S.A.
- Five-year Eibach warranty
Emissions and warning: California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. See www.P65Warnings.ca.gov.
Fitment: 2021-2026 Ford F-150 Raptor 3.5L V6 EcoBoost 4WD (35 in and 37 in setups) and 2023-2026 Ford F-150 Raptor R 5.2L supercharged 4WD. Eibach does not guarantee fitment, height or warranty on unlisted applications. Fitment confirmed against Eibach's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
This Eibach Pro-Lift-Kit is a set of four coil springs that raises a 2021-2026 Ford F-150 Raptor without adding spacers or swapping the shocks. It is built for the 3.5L EcoBoost 4WD Raptor, and Eibach lists it for both the 35-inch and the 37-inch tire packages.
Lift from the springs themselves. The kit gives about 2.2 inches of extra height at the front and 1.5 inches at the rear. Because the height comes from the spring rather than a spacer, the shock and suspension keep working through their normal range of travel.
Made for the factory FOX electronic shocks. Eibach designed these springs to be used with the OE FOX electronic shocks, so the truck keeps its stock damping hardware. Eibach also notes that it does not guarantee fitment, height or warranty on applications it does not list.
Room for bigger tires and a better stance. The added height opens up fender clearance for larger wheels and tires and increases ground clearance for trail driving, while the springs are tuned to keep on-road handling steady.
Built in the USA with a five-year warranty. Eibach makes these springs in the United States and covers them against defects in material and workmanship under its five-year warranty for passenger cars and light-duty trucks.
Features
- Set of 4 coil springs
- About 2.2 in front lift and 1.5 in rear lift
- Listed for 35 in and 37 in tire packages
- Designed to work with the OE FOX electronic shocks
- More fender clearance and ground clearance
- Made in the U.S.A.
- Five-year warranty
Emissions and warnings. This product carries a California Proposition 65 warning for cancer and reproductive harm (www.P65Warnings.ca.gov).
Fitment: 2021-2026 Ford F-150 Raptor, 3.5L V6 EcoBoost, 4WD (3rd generation), 35 in and 37 in. Fitment confirmed against Eibach's published application list.
Guides & Manuals
Installation InstructionsWarranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
These Eibach Pro-Lift-Kit front springs raise the front of a 2021-2026 Ford F-150 Raptor (3.5L EcoBoost, 4WD, 3rd generation) by 2.2 inches. The kit is a set of two coil springs that replace the factory front springs, so you get more ground clearance and room for bigger wheels and tires without adding spacers or swapping the upper mounts and control arms. Eibach lists the same +2.2in front lift for both the 35-inch and 37-inch Raptor applications.
Lift from the springs alone. Because the lift comes from a taller spring rather than a spacer, the suspension keeps its full range of travel and the stock geometry stays in play. It is a front-only kit, so the rear of the truck is not changed.
Built to work with the factory shocks. Eibach notes that this kit is designed to use the OE FOX electronic shocks, so the Raptor's electronic suspension stays in service. Eibach also states that it does not guarantee fitment, height or warranty on applications it does not list.
American-made and backed for five years. The springs are made in the U.S.A. and carry Eibach's five-year warranty against defects in material and workmanship under normal use.
Features
- Set of 2 front coil springs
- +2.2in front lift on the F-150 Raptor, 35in and 37in tire applications
- Added ground clearance and fender clearance for larger wheels and tires
- Keeps stock upper mounts and control arms
- Designed for the OE FOX electronic shocks
- Made in U.S.A.
- Five-year Eibach warranty
Emissions and warnings: This is a chassis part with no emissions certification. Eibach carries a California Proposition 65 warning for this product (www.P65Warnings.ca.gov).
Fitment: 2021-2026 Ford F-150 Raptor, 3.5L V6 EcoBoost, 4WD, 3rd generation, with 35in or 37in tires. Fitment confirmed against Eibach's published application list.
Guides & Manuals
Installation InstructionsWarranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
These Eibach Pro-Lift-Kit front springs raise the front of a 2021-2026 Ford F-150 Raptor with the 3.5L EcoBoost V6 by about 1 inch. The kit is a set of two coil springs that drop in without coilovers or spacers, so the truck keeps its factory upper mounts and control arms. Eibach lists the kit for both 35 inch and 37 inch tire setups.
Lift from the spring, not from spacers. Because the lift comes from a taller spring rate and height rather than a spacer stacked on the shock, the suspension keeps its full range of travel and the ball joints and bushings are not asked to work at a new angle.
Made for the factory electronic shocks. Eibach notes that this kit is designed to be used with the original Fox electronic shocks, so the stock damping system stays in place and works with the new springs.
More room for bigger tires. The added front height gives extra fender clearance and ground clearance for larger wheels and tires, while Eibach designs the spring to hold on-road stability and ride quality.
Built in the U.S.A. Eibach makes the Pro-Lift-Kit springs in the United States, draws on its off-road race experience, and backs them with a five-year warranty.
- Set of 2 front coil springs (front only; rear springs are a separate kit)
- About 1 inch of front lift
- Listed for 35 inch and 37 inch tire applications
- Keeps the stock upper mounts and control arms
- Designed for the OE Fox electronic shocks
- Made in the U.S.A., five-year warranty
Prop 65: Eibach lists a California Proposition 65 warning for this product (cancer and reproductive harm; details at www.P65Warnings.ca.gov). Eibach lists no CARB EO number for it.
Fitment: 2021-2026 Ford F-150 Raptor, 3.5L V6 EcoBoost, 4WD, 3rd generation, in both the 35 inch and 37 inch applications. Fitment confirmed against Eibach's published application list.
Guides & Manuals
Installation InstructionsWarranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
$97.97
The Diode Dynamics Stage Series HitchMount LED Pod Reverse Kit holds an SSC1 LED pod in your trailer hitch receiver, adding a high-power reverse light and an extra running light to your Raptor.
Brighter backups. Factory reverse bulbs do not give enough light to back up at night with confidence. The SSC1 pod uses patented TIR optics and high-power LEDs to add a reverse light several times brighter than stock, and it comes on automatically when you shift into reverse.
Snap-fit install. The patent-pending snap-fit mount slides into a 2-inch or 2.5-inch receiver in minutes, with no drilling and no hitch pin. The included harness plugs into your factory trailer hitch wiring, so there is no custom wiring or routing.
Know before you buy. Diode notes this kit is not meant to replace the factory tail lamps, and your hitch receiver needs an open back. You can use a locking trailer pin instead of the snap-fit pins with a quick modification shown in Diode's video.
Made in the USA. Stage Series lighting is designed and assembled in the USA, and an optional SafetyStrobe brake light strobing feature is available.
Features
- Mounts one SSC1 LED pod in a 2-inch or 2.5-inch hitch receiver
- High-power reverse light with red accent light
- Plugs into factory trailer hitch wiring
- Snap-fit mount, 5-minute install, no drilling
- Optional SafetyStrobe brake light strobing
- Designed and assembled in the USA
Fitment: 2017-2020 and 2024-2026 F-150 Raptor. Fitment confirmed against Diode Dynamics' published application list.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
| 2024-2026 | Ford | F-150 | Raptor |
$39.96
These Diode Dynamics Stage Series ditch light brackets let you mount two Stage Series LED pods above the hood of your 2021-2025 F-150 Raptor, using the factory mounting points.
Bolt-on fitment. The application-specific brackets were CAD-designed to use existing mounting points and hardware, so there is no cutting or drilling, and they will not interfere with raising or lowering the hood.
Stainless steel. Thick-gauge stainless steel will not corrode the way mild steel does, and it will not vibrate or bounce while you drive.
Low profile. The design keeps glare down and sits close to the body.
Pods sold separately. The brackets take two Stage Series SS3 or SSC2 pods. Diode lists this bracket for 2021-2026 F-150; on RaptorsOnly we list it for the 2021-2025 Raptor.
Features
- Mounts two Stage Series SS3 or SSC2 LED pods above the hood
- Uses factory mounting points, no cutting or drilling
- Thick-gauge stainless steel construction
- Low-profile design
- Will not interfere with the hood
Fitment: 2021-2025 F-150 Raptor. Diode lists these brackets for the 2021-2026 F-150; the Raptor years are limited to 2021-2025 by our fitment review. Fitment confirmed against Diode Dynamics' published application list.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | F-150 | Raptor |
$559.00
DeatschWerks 15-24 Ford F-150 DW400 Performance Module
Product Specifications SheetThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2024 | Ford | F-150 | King Ranch |
| 2015-2024 | Ford | F-150 | Lariat |
| 2016-2023 | Ford | F-150 | Limited |
| 2015-2024 | Ford | F-150 | Platinum |
| 2018-2024 | Ford | F-150 | Police Responder |
| 2017-2024 | Ford | F-150 | Raptor |
| 2016-2024 | Ford | F-150 | SSV |
| 2024 | Ford | F-150 | STX |
| 2021-2024 | Ford | F-150 | Tremor |
| 2015-2024 | Ford | F-150 | XL |
| 2015-2024 | Ford | F-150 | XLT |
$279.00
DeatschWerks, LLC provides high-performance fuel system solutions for the automotive aftermarket. Located in Oklahoma City, OK, DW houses all of the company?s functions including design, end-manufacturing, quality assurance, sales, marketing, and administration in its 36,000sf facility. DeatschWerks? roots were established in 2004 by offering high flow drop-in fitment fuel injectors. In 2009 DW expanded into fuel pumps with the DW300, the highest flowing in-tank fuel pump of its time. Since then, DW has developed a wide range of innovative fuel system components which include in-tank and in-line pumps, surge tanks, fuel rails, fuel filters, pressure regulators, and a fuel-specific lines, fittings, and adaptors. Today, the DeatschWerks line-up of fuel system components includes over 800 SKU?s covering Sport Compact, Modern Muscle, Euro, and Powersport applications.
Technical BulletinInstallation Instructions
Product Specifications Sheet
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | FX2 |
| 2009-2014 | Ford | F-150 | FX4 |
| 2010-2012 | Ford | F-150 | Harley-Davidson Edition |
| 2009-2025 | Ford | F-150 | King Ranch |
| 2009-2025 | Ford | F-150 | Lariat |
| 2011 | Ford | F-150 | Lariat Limited |
| 2013-2014,2016-2023 | Ford | F-150 | Limited |
| 2009-2025 | Ford | F-150 | Platinum |
| 2018-2025 | Ford | F-150 | Police Responder |
| 2017-2025 | Ford | F-150 | Raptor |
| 2016-2025 | Ford | F-150 | SSV |
| 2009-2014,2024-2025 | Ford | F-150 | STX |
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2021-2025 | Ford | F-150 | Tremor |
| 2009-2025 | Ford | F-150 | XL |
| 2009-2025 | Ford | F-150 | XLT |
| 2019-2020 | Ford | Mustang | Bullitt |
| 2024-2025 | Ford | Mustang | Dark Horse |
| 2024-2025 | Ford | Mustang | Dark Horse Premium |
| 2015-2025 | Ford | Mustang | EcoBoost |
| 2015-2025 | Ford | Mustang | EcoBoost Premium |
| 2015-2025 | Ford | Mustang | GT |
| 2015 | Ford | Mustang | GT 50 Years Limited Edition |
| 2015-2025 | Ford | Mustang | GT Premium |
| 2021-2023 | Ford | Mustang | Mach 1 |
| 2015-2020 | Ford | Mustang | Shelby GT350 |
| 2015-2020 | Ford | Mustang | Shelby GT350R |
| 2020-2021 | Ford | Mustang | Shelby GT500 |
| 2015-2017 | Ford | Mustang | V6 |
$39.00
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | FX2 |
| 2009-2014 | Ford | F-150 | FX4 |
| 2010-2012 | Ford | F-150 | Harley-Davidson Edition |
| 2009-2025 | Ford | F-150 | King Ranch |
| 2009-2025 | Ford | F-150 | Lariat |
| 2011 | Ford | F-150 | Lariat Limited |
| 2013-2014,2016-2023 | Ford | F-150 | Limited |
| 2009-2025 | Ford | F-150 | Platinum |
| 2018-2025 | Ford | F-150 | Police Responder |
| 2017-2025 | Ford | F-150 | Raptor |
| 2016-2025 | Ford | F-150 | SSV |
| 2009-2014,2024-2025 | Ford | F-150 | STX |
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2021-2025 | Ford | F-150 | Tremor |
| 2009-2025 | Ford | F-150 | XL |
| 2009-2025 | Ford | F-150 | XLT |
| 2015-2017 | Ford | Mustang | EcoBoost |
| 2015-2017 | Ford | Mustang | EcoBoost Premium |
| 2015-2017 | Ford | Mustang | GT |
| 2015 | Ford | Mustang | GT 50 Years Limited Edition |
| 2015-2017 | Ford | Mustang | GT Premium |
| 2015-2017 | Ford | Mustang | Shelby GT350 |
| 2015-2017 | Ford | Mustang | Shelby GT350R |
| 2015-2017 | Ford | Mustang | V6 |
$359.00
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011-2014 | Ford | F-150 | FX2 |
| 2011-2014 | Ford | F-150 | FX4 |
| 2011-2012 | Ford | F-150 | Harley-Davidson Edition |
| 2011-2025 | Ford | F-150 | King Ranch |
| 2011-2025 | Ford | F-150 | Lariat |
| 2011 | Ford | F-150 | Lariat Limited |
| 2013-2014,2016-2023 | Ford | F-150 | Limited |
| 2011-2025 | Ford | F-150 | Platinum |
| 2018-2025 | Ford | F-150 | Police Responder |
| 2017-2025 | Ford | F-150 | Raptor |
| 2016-2025 | Ford | F-150 | SSV |
| 2011-2014,2024-2025 | Ford | F-150 | STX |
| 2011-2014 | Ford | F-150 | SVT Raptor |
| 2021-2025 | Ford | F-150 | Tremor |
| 2011-2025 | Ford | F-150 | XL |
| 2011-2025 | Ford | F-150 | XLT |
| 2011-2014 | Ford | Mustang | Base |
| 2012-2013 | Ford | Mustang | Boss 302 |
| 2011-2025 | Ford | Mustang | GT |
| 2015 | Ford | Mustang | GT 50 Years Limited Edition |
| 2015-2021 | Ford | Mustang | GT Premium |
| 2011-2014 | Ford | Mustang | Shelby GT500 |
$259.00
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011-2014 | Ford | F-150 | FX2 |
| 2011-2014 | Ford | F-150 | FX4 |
| 2011-2012 | Ford | F-150 | Harley-Davidson Edition |
| 2011-2025 | Ford | F-150 | King Ranch |
| 2011-2025 | Ford | F-150 | Lariat |
| 2011 | Ford | F-150 | Lariat Limited |
| 2013-2014,2016-2023 | Ford | F-150 | Limited |
| 2011-2025 | Ford | F-150 | Platinum |
| 2018-2025 | Ford | F-150 | Police Responder |
| 2017-2025 | Ford | F-150 | Raptor |
| 2016-2025 | Ford | F-150 | SSV |
| 2011-2014,2024-2025 | Ford | F-150 | STX |
| 2011-2014 | Ford | F-150 | SVT Raptor |
| 2021-2025 | Ford | F-150 | Tremor |
| 2011-2025 | Ford | F-150 | XL |
| 2011-2025 | Ford | F-150 | XLT |
| 2011-2014 | Ford | Mustang | Base |
| 2012-2013 | Ford | Mustang | Boss 302 |
| 2019-2020 | Ford | Mustang | Bullitt |
| 2024 | Ford | Mustang | Dark Horse |
| 2024 | Ford | Mustang | Dark Horse Premium |
| 2015-2024 | Ford | Mustang | EcoBoost |
| 2015-2024 | Ford | Mustang | EcoBoost Premium |
| 2011-2025 | Ford | Mustang | GT |
| 2015 | Ford | Mustang | GT 50 Years Limited Edition |
| 2015-2024 | Ford | Mustang | GT Premium |
| 2021-2023 | Ford | Mustang | Mach 1 |
| 2015-2020 | Ford | Mustang | Shelby GT350 |
| 2015-2020 | Ford | Mustang | Shelby GT350R |
| 2011-2014,2020-2022 | Ford | Mustang | Shelby GT500 |
| 2015-2017 | Ford | Mustang | V6 |
$459.00
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | FX2 |
| 2010-2014 | Ford | F-150 | FX4 |
| 2010-2012 | Ford | F-150 | Harley-Davidson Edition |
| 2010-2025 | Ford | F-150 | King Ranch |
| 2010-2025 | Ford | F-150 | Lariat |
| 2011 | Ford | F-150 | Lariat Limited |
| 2013-2014,2016-2023 | Ford | F-150 | Limited |
| 2010-2025 | Ford | F-150 | Platinum |
| 2018-2025 | Ford | F-150 | Police Responder |
| 2017-2025 | Ford | F-150 | Raptor |
| 2016-2025 | Ford | F-150 | SSV |
| 2010-2014,2024-2025 | Ford | F-150 | STX |
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2021-2025 | Ford | F-150 | Tremor |
| 2010-2025 | Ford | F-150 | XL |
| 2010-2025 | Ford | F-150 | XLT |
$539.00
DeatschWerks, LLC provides high-performance fuel system solutions for the automotive aftermarket. Located in Oklahoma City, OK, DW houses all of the company?s functions including design, end-manufacturing, quality assurance, sales, marketing, and administration in its 36,000sf facility. DeatschWerks? roots were established in 2004 by offering high flow drop-in fitment fuel injectors. In 2009 DW expanded into fuel pumps with the DW300, the highest flowing in-tank fuel pump of its time. Since then, DW has developed a wide range of innovative fuel system components which include in-tank and in-line pumps, surge tanks, fuel rails, fuel filters, pressure regulators, and a fuel-specific lines, fittings, and adaptors. Today, the DeatschWerks line-up of fuel system components includes over 800 SKU?s covering Sport Compact, Modern Muscle, Euro, and Powersport applications.
User 1This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2007-2008,2010-2014 | Ford | F-150 | FX2 |
| 2005-2014 | Ford | F-150 | FX4 |
| 2006-2008,2010-2012 | Ford | F-150 | Harley-Davidson Edition |
| 2005-2025 | Ford | F-150 | King Ranch |
| 2005-2025 | Ford | F-150 | Lariat |
| 2011 | Ford | F-150 | Lariat Limited |
| 2008,2013-2014,2016-2023 | Ford | F-150 | Limited |
| 2009-2025 | Ford | F-150 | Platinum |
| 2018-2025 | Ford | F-150 | Police Responder |
| 2017-2025 | Ford | F-150 | Raptor |
| 2016-2025 | Ford | F-150 | SSV |
| 2005-2014,2024-2025 | Ford | F-150 | STX |
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2008 | Ford | F-150 | THE 60TH ANNIVERSARY EDITION |
| 2021-2025 | Ford | F-150 | Tremor |
| 2005-2025 | Ford | F-150 | XL |
| 2005-2025 | Ford | F-150 | XLT |
| 2010 | Ford | F-250 Super Duty | Cabela's |
| 2010 | Ford | F-250 Super Duty | Harley-Davidson Edition |
| 2010-2017 | Ford | F-250 Super Duty | King Ranch |
| 2010-2017 | Ford | F-250 Super Duty | Lariat |
| 2013-2017 | Ford | F-250 Super Duty | Platinum |
| 2010-2017 | Ford | F-250 Super Duty | XL |
| 2010-2017 | Ford | F-250 Super Duty | XLT |
| 2008-2009 | Ford | Mustang | Bullitt |
| 2005-2025 | Ford | Mustang | GT |
| 2007-2008 | Ford | Mustang | Shelby GT |
| 2017-2020 | Ford | Mustang | Shelby GT350 |
| 2003-2004 | Ford | Mustang | SVT Cobra |
$539.00
DeatschWerks, LLC provides high-performance fuel system solutions for the automotive aftermarket. Located in Oklahoma City, OK, DW houses all of the company?s functions including design, end-manufacturing, quality assurance, sales, marketing, and administration in its 36,000sf facility. DeatschWerks? roots were established in 2004 by offering high flow drop-in fitment fuel injectors. In 2009 DW expanded into fuel pumps with the DW300, the highest flowing in-tank fuel pump of its time. Since then, DW has developed a wide range of innovative fuel system components which include in-tank and in-line pumps, surge tanks, fuel rails, fuel filters, pressure regulators, and a fuel-specific lines, fittings, and adaptors. Today, the DeatschWerks line-up of fuel system components includes over 800 SKU?s covering Sport Compact, Modern Muscle, Euro, and Powersport applications.
User 1This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2007-2008,2010-2014 | Ford | F-150 | FX2 |
| 2005-2014 | Ford | F-150 | FX4 |
| 2006-2008,2010-2012 | Ford | F-150 | Harley-Davidson Edition |
| 2005-2025 | Ford | F-150 | King Ranch |
| 2005-2025 | Ford | F-150 | Lariat |
| 2011 | Ford | F-150 | Lariat Limited |
| 2008,2013-2014,2016-2023 | Ford | F-150 | Limited |
| 2009-2025 | Ford | F-150 | Platinum |
| 2018-2025 | Ford | F-150 | Police Responder |
| 2017-2025 | Ford | F-150 | Raptor |
| 2016-2025 | Ford | F-150 | SSV |
| 2005-2014,2024-2025 | Ford | F-150 | STX |
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2008 | Ford | F-150 | THE 60TH ANNIVERSARY EDITION |
| 2021-2025 | Ford | F-150 | Tremor |
| 2005-2025 | Ford | F-150 | XL |
| 2005-2025 | Ford | F-150 | XLT |
| 2010 | Ford | F-250 Super Duty | Cabela's |
| 2010 | Ford | F-250 Super Duty | Harley-Davidson Edition |
| 2010-2017 | Ford | F-250 Super Duty | King Ranch |
| 2010-2017 | Ford | F-250 Super Duty | Lariat |
| 2013-2017 | Ford | F-250 Super Duty | Platinum |
| 2010-2017 | Ford | F-250 Super Duty | XL |
| 2010-2017 | Ford | F-250 Super Duty | XLT |
| 2005-2025 | Ford | Mustang | GT |
| 2017-2020 | Ford | Mustang | Shelby GT350 |
| 2003-2004 | Ford | Mustang | SVT Cobra |
$499.00
DeatschWerks, LLC provides high-performance fuel system solutions for the automotive aftermarket. Located in Oklahoma City, OK, DW houses all of the company?s functions including design, end-manufacturing, quality assurance, sales, marketing, and administration in its 36,000sf facility. DeatschWerks? roots were established in 2004 by offering high flow drop-in fitment fuel injectors. In 2009 DW expanded into fuel pumps with the DW300, the highest flowing in-tank fuel pump of its time. Since then, DW has developed a wide range of innovative fuel system components which include in-tank and in-line pumps, surge tanks, fuel rails, fuel filters, pressure regulators, and a fuel-specific lines, fittings, and adaptors. Today, the DeatschWerks line-up of fuel system components includes over 800 SKU?s covering Sport Compact, Modern Muscle, Euro, and Powersport applications.
User 1User 2
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2007-2008,2010-2014 | Ford | F-150 | FX2 |
| 2005-2014 | Ford | F-150 | FX4 |
| 2006-2008,2010-2012 | Ford | F-150 | Harley-Davidson Edition |
| 2005-2025 | Ford | F-150 | King Ranch |
| 2005-2025 | Ford | F-150 | Lariat |
| 2011 | Ford | F-150 | Lariat Limited |
| 2008,2013-2014,2016-2023 | Ford | F-150 | Limited |
| 2009-2025 | Ford | F-150 | Platinum |
| 2018-2025 | Ford | F-150 | Police Responder |
| 2017-2025 | Ford | F-150 | Raptor |
| 2016-2025 | Ford | F-150 | SSV |
| 2005-2014,2024-2025 | Ford | F-150 | STX |
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2008 | Ford | F-150 | THE 60TH ANNIVERSARY EDITION |
| 2021-2025 | Ford | F-150 | Tremor |
| 2005-2025 | Ford | F-150 | XL |
| 2005-2025 | Ford | F-150 | XLT |
| 2010 | Ford | F-250 Super Duty | Cabela's |
| 2010 | Ford | F-250 Super Duty | Harley-Davidson Edition |
| 2010-2017 | Ford | F-250 Super Duty | King Ranch |
| 2010-2017 | Ford | F-250 Super Duty | Lariat |
| 2013-2017 | Ford | F-250 Super Duty | Platinum |
| 2010-2017 | Ford | F-250 Super Duty | XL |
| 2010-2017 | Ford | F-250 Super Duty | XLT |
| 2012-2013 | Ford | Mustang | Boss 302 |
| 2008-2009 | Ford | Mustang | Bullitt |
| 2005-2025 | Ford | Mustang | GT |
| 2015 | Ford | Mustang | GT 50 Years Limited Edition |
| 2015-2018 | Ford | Mustang | GT Premium |
| 2007-2008 | Ford | Mustang | Shelby GT |
| 2017-2020 | Ford | Mustang | Shelby GT350 |
| 2017-2018 | Ford | Mustang | Shelby GT350R |
$719.00
DeatschWerks, LLC provides high-performance fuel system solutions for the automotive aftermarket. Located in Oklahoma City, OK, DW houses all of the company?s functions including design, end-manufacturing, quality assurance, sales, marketing, and administration in its 36,000sf facility. DeatschWerks? roots were established in 2004 by offering high flow drop-in fitment fuel injectors. In 2009 DW expanded into fuel pumps with the DW300, the highest flowing in-tank fuel pump of its time. Since then, DW has developed a wide range of innovative fuel system components which include in-tank and in-line pumps, surge tanks, fuel rails, fuel filters, pressure regulators, and a fuel-specific lines, fittings, and adaptors. Today, the DeatschWerks line-up of fuel system components includes over 800 SKU?s covering Sport Compact, Modern Muscle, Euro, and Powersport applications.
User 1User 4
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2007-2008,2010-2014 | Ford | F-150 | FX2 |
| 2005-2014 | Ford | F-150 | FX4 |
| 2006-2008,2010-2012 | Ford | F-150 | Harley-Davidson Edition |
| 2005-2025 | Ford | F-150 | King Ranch |
| 2005-2025 | Ford | F-150 | Lariat |
| 2011 | Ford | F-150 | Lariat Limited |
| 2008,2013-2014,2016-2023 | Ford | F-150 | Limited |
| 2009-2025 | Ford | F-150 | Platinum |
| 2018-2025 | Ford | F-150 | Police Responder |
| 2017-2025 | Ford | F-150 | Raptor |
| 2016-2025 | Ford | F-150 | SSV |
| 2005-2014,2024-2025 | Ford | F-150 | STX |
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2008 | Ford | F-150 | THE 60TH ANNIVERSARY EDITION |
| 2021-2025 | Ford | F-150 | Tremor |
| 2005-2025 | Ford | F-150 | XL |
| 2005-2025 | Ford | F-150 | XLT |
| 2010 | Ford | F-250 Super Duty | Cabela's |
| 2010 | Ford | F-250 Super Duty | Harley-Davidson Edition |
| 2010-2015 | Ford | F-250 Super Duty | King Ranch |
| 2010-2015 | Ford | F-250 Super Duty | Lariat |
| 2013-2015 | Ford | F-250 Super Duty | Platinum |
| 2010-2015 | Ford | F-250 Super Duty | XL |
| 2010-2015 | Ford | F-250 Super Duty | XLT |
| 2012-2013 | Ford | Mustang | Boss 302 |
| 2005-2025 | Ford | Mustang | GT |
| 2015 | Ford | Mustang | GT 50 Years Limited Edition |
| 2015-2018 | Ford | Mustang | GT Premium |
| 2003-2004 | Ford | Mustang | SVT Cobra |
The CSF 8303 is a heavy-duty all-aluminum radiator for the third-generation Ford F-150 Raptor. CSF lists it for the 2021-2025 Raptor with the 3.5L EcoBoost and the 2023-2026 Raptor with the 5.2L supercharged V8, so it covers both engines in the current truck.
Added cooling capacity. It replaces the factory radiator with a CSF core built for more heat rejection, which helps the engine stay cool when towing, crawling or driving hard in the heat.
Direct fit. The radiator is a plug-and-play replacement made for the 2021 and newer F-150, and it also covers the F-150 Police Responder, the full-hybrid F-150 and the 2022-2024 Expedition and Navigator with the 3.5L turbo engine.
Backed by CSF. CSF warranties its radiators for two years.
Features
- All-aluminum high-performance radiator core
- Direct fit for the 2021-2026 F-150 Raptor
- Covers 3.5L EcoBoost and 5.2L supercharged engines
- 2-year CSF warranty
Fitment: 2021-2025 F-150 Raptor 3.5L turbo and 2023-2026 F-150 Raptor 5.2L supercharged. Fitment confirmed against CSF's published application list.
Guides & Manuals
CSF WarrantyCSF Raptor Radiator Announcement
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | F-150 | Raptor 3.5L turbo |
| 2023-2026 | Ford | F-150 | Raptor 5.2L supercharged |
| 2021-2026 | Ford | F-150 | Police Responder 3.5L turbo, full hybrid 3.5L turbo |
| 2022-2024 | Ford / Lincoln | Expedition / Navigator | 3.5L turbo |
$359.10
The CSF 8102 is a high-performance transmission oil cooler for the 2017-2026 Ford F-150 Raptor, including the 2023-2026 Raptor R. It swaps the factory front-mounted cooler for a larger one, so the transmission stays cooler under towing, heat and hard driving.
Cooler fluid, bigger core. The core measures 3.7 by 29.2 inches with 7 tubes and 8 fin rows. CSF says it is about 40 percent larger than the original cooler, and the tube and fin assembly is robot welded for consistency.
Check your cooler first. Not every F-150 has a front-mounted transmission cooler. CSF notes that you need the Ford OE cooler FL3Z-7A095-A or HL3Z-7A095-A. Trucks with the ML3Z-7869-C part will not fit without modification.
Quick installation. CSF estimates installation at under 30 minutes. Two install photos are included on CSF's page.
Features
- 3.7 x 29.2 inch core, about 40% larger than OEM
- 7 tubes with 8 fin rows
- Robot-welded tube and fin construction
- Fits Raptor 3.5L EcoBoost (2017-2026) and Raptor / Raptor R 5.2L supercharged (2023-2026)
- 2-year CSF warranty
Fitment: 2017-2020 and 2021-2026 F-150 Raptor 3.5L EcoBoost, and 2023-2026 Raptor and Raptor R 5.2L supercharged, plus the other F-150 applications listed below. Fitment confirmed against CSF's published application list.
Guides & Manuals
CSF WarrantyThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor 3.5L turbo |
| 2021-2026 | Ford | F-150 | Raptor 3.5L turbo |
| 2023-2026 | Ford | F-150 | Raptor 5.2L supercharged |
| 2023-2026 | Ford | F-150 | Raptor R 5.2L supercharged |
| 2015-2026 | Ford | F-150 | 2.7L turbo, 3.5L, 3.5L turbo, 5.0L (see CSF fitment notes) |
The Corsa aluminum oil catch can is a vehicle-specific kit for the 3.5L EcoBoost V6 in the 2017-2023 Ford F-150 Raptor. It traps blow-by gases, oil vapor, water and particulates before they can reach your intake, helping protect sensitive components and slow carbon build-up on the intake valves.
Multi-stage oil separation. Vapor passes through a series of chambers and baffles and then a bronze filter, which pulls oil out of the air and keeps it from re-entering the system.
All 6061 aluminum. The can is machined from 6061 aluminum, which resists corrosion. A flat machined top and knurled bottom make it easy to grip when you service it.
Easy to service. The threaded housing unscrews for emptying, and the 3 oz capacity stretches the time between services. Corsa recommends checking the can every 500 to 1,000 miles and disposing of the contents when needed, because skipping this can lead to leakage.
Made to fit the truck. OEM-style quick-disconnect fittings and multi-ply reinforced automotive-grade hoses give a secure, leak-free connection, and the can mounts in an accessible, safe location on a machined, powder-coated 11-gauge aluminum bracket that does not stress engine components.
Quick install. Corsa lists an installation time of 30 minutes or less on most applications, and the kit is backed by a one-year warranty.
Features
- 6061 aluminum can with multi-stage separation and bronze filter
- 3 oz capacity
- OEM-style quick-disconnect fittings
- Multi-ply reinforced hoses
- 11-gauge machined, powder-coated aluminum mounting bracket
- Threaded housing for easy emptying
- One-year warranty
Emissions
This catch can is not CARB approved and Corsa lists no CARB Executive Order; Corsa notes it may help reduce emissions by capturing hydrocarbons. Check your local, state and city regulations. California Proposition 65: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. See www.P65Warnings.ca.gov.
Fitment: Corsa lists this catch can for the 2017-2020 and 2021-2023 Ford F-150 Raptor with the 3.5L EcoBoost engine, the 2021-2023 F-150 Tremor, and the 2011-2023 F-150 with the 3.5L EcoBoost. Corsa does not list the 2023 Raptor R (5.2L supercharged V8). Fitment confirmed against Corsa Performance's published application list.
Guides & Manuals
Installation InstructionsOil Catch Can Sell Sheet
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor (3.5L EcoBoost) |
| 2021-2023 | Ford | F-150 | Raptor (3.5L EcoBoost) |
| 2021-2023 | Ford | F-150 | Tremor (3.5L EcoBoost) |
| 2011-2023 | Ford | F-150 | All trims (3.5L EcoBoost) |
This is the Corsa closed box air intake for the 2021-2023 Ford F-150 with the 3.5L EcoBoost, including the Raptor. It swaps the restrictive factory intake tract for a sealed airbox and tube designed by Corsa, and this version comes with a reusable DryTech synthetic filter.
Designed to flow more air. Corsa builds each intake around the specific truck to increase airflow over stock. More air through the intake helps the turbocharged V6 breathe, and it pairs naturally with a Corsa exhaust.
DryTech filtration you can wash. The DryTech element is an oil-free synthetic filter rated at 98 percent filtration efficiency. It is reusable: Corsa lists a wash interval of up to 50,000 miles, and it carries a one year filter warranty. Replacement filter: Corsa 5160.
Closed box construction. The filter lives inside an enclosed airbox that keeps underhood heat and trail dust away from the intake charge, which suits a truck that works hard off the pavement.
Lifetime intake warranty. Corsa backs the intake itself with a lifetime warranty; the filter is covered separately as described above.
Features
- Closed box air intake for the 3.5L EcoBoost F-150 and Raptor
- Reusable DryTech dry synthetic filter, wash every 50,000 miles
- Replacement filter part number 5160
- Lifetime warranty on the intake
- Bolt-on installation with Corsa instructions
Emissions. Corsa lists no CARB Executive Order for this intake, so it is not approved for emissions-regulated use in California.
Prop 65. This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. See www.P65Warnings.ca.gov for details.
Fitment: Corsa lists this intake for the 2021-2023 Ford F-150 EcoBoost 3.5L, the F-150 Tremor, the 3.5L PowerBoost F-150 and the Raptor EcoBoost 3.5L. It is not listed for the Raptor R. Fitment confirmed against Corsa Performance's published application list.
Guides & Manuals
Installation InstructionsF-150 Air Intake Sell Sheet
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2023 | Ford | F-150 | Raptor (3.5L EcoBoost) |
| 2021-2023 | Ford | F-150 | All trims (3.5L EcoBoost) |
| 2021-2023 | Ford | F-150 | Tremor (3.5L EcoBoost) |
| 2021-2023 | Ford | F-150 | 3.5L PowerBoost |
- Choosing a selection results in a full page refresh.
- Opens in a new window.