Welcome to RaptorsOnly.com
-
Brands
Shop by brand
- 3D MAXpider
- Access
- Addictive Desert Designs
- Advan
- AEM Induction
- aFe
- Air Lift
- Airaid
- Alcon
- AlphaRex
- AMP Research
- AMS
- Anderson Composites
- ANZO
- ARB
- Atturo Tire
- AutoMeter
- AVS
- AWE Tuning
- BackRack
- Baer Brakes
- Baja Designs
- BAK
- Banks Power
- BBK
- BBS
- BD Diesel
- Belltech
- Bestop
- BFGoodrich
- BMC
- Body Armor 4x4
- Borla
- Brembo
- Brembo OE
- Bully Dog
- Bushwacker
- Camburg
- Clevite
- COBB
- Cometic Gasket
- COMP Cams
- CORSA Performance
- Covercraft
- CSF
- DBA
- DeatschWerks
- DFC
- Diode Dynamics
- DS18
- DV8 Offroad
- Eaton
- EBC
- Eibach
- Enkei
- Extang
- Fabtech
- Fel-Pro
- fifteen52
- Firestone
- Flowmaster
- Ford Racing
- Forgestar
- FORM Lighting
- FOX
- Garrett
- Gates
- GEN-Y Hitch
- Go Fast Bits
- Go Rhino
- Gram Lights
- Granatelli Motor Sports
- GSC Power Division
- Hawk Performance
- Hella
- Hellwig
- Hotchkis
- Husky Liners
- ICON
- Injen
- J&L
- JBA
- JLT
- K&N Engineering
- KC HiLiTES
- King Engine Bearings
- King Shocks
- Kleinn Air Horns
- Kooks Headers
- KYB
- LIQUI MOLY
- LUND
- Magnaflow
- Mahle OE
- Maxtrac
- Mayhem
- MBRP
- McGard
- Method Wheels
- MGP
- Michelin
- Mickey Thompson
- Mishimoto
- Moog
- Motul
- MTX Wheels
- N-Fab
- Nacho Offroad Technology
- NGK
- Nitrous Express
- Odyssey Battery
- ORACLE Lighting
- PowerStop
- Putco
- QA1
- Raceline
- Radium Engineering
- Rally Armor
- Rampage
- Raxiom
- Retrax
- Rhino-Rack
- Ridetech
- Rigid Industries
- Rival 4x4
- RockJock
- Roll-N-Lock
- Roush
- Royal Purple
- SCT Performance
- Skyjacker
- Snow Performance
- SPC Performance
- SPOD
- Stainless Works
- Superlift
- Superpro
- Timbren
- Torque Solution
- TOYO
- Truxedo
- Tuff Country
- Turbosmart
- UMI Performance
- Undercover
- Volant
- Vossen
- Wagner Tuning
- WeatherTech
- Weld
- Westin
- Whiteline
- Wilwood
- Yokohama Tire
- Yukon Gear & Axle
- Zone Offroad
No brands found. Try another name or initial.
156 brands
View all brands -
F-150 Raptor
- F-150 Raptor
-
1st Gen (2010-2014)
-
2nd Gen (2017-2020)
-
3rd Gen (2021-Present)
-
Raptor R (2023-Present)
-
Bronco Raptor
- Bronco Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
-
Ranger Raptor
- Ranger Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
Your cart
Subheading
Product comparison
Describe you product comparison grid
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
F-150 Raptor 3rd Gen
Choose a department to narrow the parts below.
ALLAll partsEverything compatible
Suspension
Lighting
Bumpers & Armor
Racks
Interior Accessories
Exterior Accessories
Performance
Wheels & Tires
Brakes
Drivetrain
Engine & Cooling
802 products
802 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$459.00
The DeatschWerks VB40aX1 is a fuel pump voltage booster that comes with a plug-n-play harness, so it connects with plugs instead of new wiring. For an SVT Raptor owner who has added fuel demand, it is a direct way to give the in-tank pump more to work with.
Built for the first-generation Raptor. DeatschWerks lists this booster for the 2011-2025 Ford F-150 and states that it does not fit the 2017+ Raptor. On the Raptor that leaves the 2011-2014 SVT Raptor, and that is the only Raptor this listing claims.
Plug-n-play harness. The harness is part of the kit, so installation uses connectors instead of new wiring. DeatschWerks publishes an installation guide for the booster, linked below.
Tough, simple housing. The booster is made from T6061 aluminum and is rated for all fuel types, including ethanol blends. Every DeatschWerks product carries the maker's Limited Lifetime Warranty.
Features
- Fuel pump voltage booster with plug-n-play harness included
- T6061 aluminum construction
- Compatible with all fuel types, ethanol compatible
- Limited Lifetime Warranty from DeatschWerks
- Part number 4-02-VB40aX1
Emissions. This part is not CARB-approved and is intended for off-road and competition use.
Prop 65. This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm.
Fitment: DeatschWerks lists this booster for the 2011-2025 Ford F-150 and says it does not fit the 2017+ Raptor, so it fits the 2011-2014 SVT Raptor only. It does not fit the 2017-2020 Raptor, the 2021+ Raptor or the Raptor R. Fitment confirmed against DeatschWerks' published application list.
Guides & Manuals
Installation InstructionsLimited Lifetime Warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011-2014 | Ford | F-150 | SVT Raptor |
$499.00
This DeatschWerks 440cc/min (42lb) top feed fuel injector set is a measured step up in flow for SVT Raptor owners who are adding power. It arrives as a matched set of 8, one injector for each cylinder of the V8.
A right-sized upgrade. At 440cc/min each, these injectors give you more fuel capacity than a stock-level setup without going to the very large sizes aimed at extreme builds. They suit a truck with bolt-on changes and a fresh tune.
Top feed design. Fuel enters these injectors from the top, the same general layout as the original style, so the set drops in where the factory injectors sit.
Tune to match. Injectors with a different flow rate than the originals need the engine's fuel calibration updated. DeatschWerks publishes injector tuning data for this part on its own product page to help your tuner set it up.
Backed by the maker. DeatschWerks covers its products with a Limited Lifetime Warranty.
Features
- 440cc/min (42lb) flow rating
- Top feed design
- Matched set of 8 injectors
- Tuning data published by DeatschWerks
- DeatschWerks Limited Lifetime Warranty
Emissions: This product is not CARB-approved. This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm.
Fitment: DeatschWerks lists this set for the SVT Raptor. The first SVT Raptor was the 2010 model year, so we show 2010-2014. Fitment confirmed against DeatschWerks' published application list.
Guides & Manuals
Warranty PolicyThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
$719.00
This DeatschWerks 1000cc/min (95lb/hr) fuel injector set is built for SVT Raptor owners who have added fuel demand to the truck and need injectors sized for it. It arrives as a matched set of 8, one injector for each cylinder of the V8.
Sized for big power. At 1000cc/min each, these injectors are meant for engines making far more fuel demand than the factory units were designed to supply. Moving to injectors this large means the engine's fuel calibration has to be updated to match, so plan on a tune when you install them.
Ready for the factory harness. DeatschWerks fits these injectors with a USCAR connector, so they plug into the style of connector used on the Raptor's wiring.
Made for modern fuels. The maker lists the set as ethanol compatible, which suits trucks running E85 or flex-fuel blends.
Backed by the maker. DeatschWerks covers its products with a Limited Lifetime Warranty, and it publishes injector tuning data for this part on its own product page to help your tuner.
Features
- 1000cc/min (95lb/hr) flow rating
- Matched set of 8 injectors
- USCAR connector
- Ethanol compatible
- DeatschWerks Limited Lifetime Warranty
Emissions: This product is not CARB-approved. This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm.
Fitment: DeatschWerks lists this set for the SVT Raptor. The first SVT Raptor was the 2010 model year, so we show 2010-2014. Fitment confirmed against DeatschWerks' published application list.
Guides & Manuals
Warranty PolicyThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
$539.00
This DeatschWerks 800cc/min (78lb) fuel injector set is aimed at SVT Raptor owners building a truck with serious fuel demand. It arrives as a matched set of 8, one injector for each cylinder of the V8.
High flow for built engines. At 800cc/min each, these injectors move far more fuel than the factory units, which matters once you add boost, heavier ethanol blends or other upgrades that raise fuel demand.
A set, not singles. DeatschWerks supplies all eight injectors together as a matched set, so you can replace the full rail in one go.
Tune required. Injectors this large change how much fuel the engine delivers at a given pulse width, so the fuel calibration has to be updated to match. DeatschWerks publishes injector tuning data for this part on its own product page to help your tuner.
Backed by the maker. DeatschWerks covers its products with a Limited Lifetime Warranty.
Features
- 800cc/min (78lb) flow rating
- Matched set of 8 injectors
- Tuning data published by DeatschWerks
- DeatschWerks Limited Lifetime Warranty
Emissions: This product is not CARB-approved. This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm.
Fitment: DeatschWerks lists this set for the SVT Raptor. The first SVT Raptor was the 2010 model year, so we show 2010-2014. Fitment confirmed against DeatschWerks' published application list.
Guides & Manuals
Warranty PolicyThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
$539.00
This DeatschWerks 630cc/min (60lb) top feed fuel injector set gives SVT Raptor owners a solid middle step in fuel flow for a built or boosted truck. It arrives as a matched set of 8, one injector for each cylinder of the V8.
Room to grow. At 630cc/min each, these injectors carry more fuel than smaller upgrade sizes, which helps when you are planning more power than the factory injectors can support.
Top feed design. Fuel enters from the top of the injector, the same general layout as the original style, so the set takes the place of the factory injectors in the rail.
Plan the tune. A different flow rate than stock means the engine's fuel calibration has to be adjusted when you install them. DeatschWerks publishes injector tuning data for this part on its own product page for your tuner to work from.
Backed by the maker. DeatschWerks covers its products with a Limited Lifetime Warranty.
Features
- 630cc/min (60lb) flow rating
- Top feed design
- Matched set of 8 injectors
- Tuning data published by DeatschWerks
- DeatschWerks Limited Lifetime Warranty
Emissions: This product is not CARB-approved. This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm.
Fitment: DeatschWerks lists this set for the SVT Raptor. The first SVT Raptor was the 2010 model year, so we show 2010-2014. Fitment confirmed against DeatschWerks' published application list.
Guides & Manuals
Warranty PolicyThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
$399.95
The AMS Cold Air Intake replaces the factory airbox and Y-tube on the 2021+ Ford F-150 Raptor 3.5L EcoBoost with a rotomolded XLPE airbox and tube engineered around airflow, not around whatever space was left under the hood. It bolts in with no cutting or trimming and gives the twin turbos a much freer path from the grille to the compressor inlets.
Opening up the choke point. Ford's intake necks the Y-tube down to 72.4 mm right where it splits toward the two turbos. The AMS Y-tube holds 102 mm inside diameter through the split, which is 98 percent more flow area at the tightest point in the system. The duct opening into the airbox grows by 42 percent, so more fresh air comes in from the factory inlet location.
A far bigger filter. The factory panel filter has 77.42 square inches of frontal area. The AMS filter has 246.5 square inches, which is 218 percent more, and it sits in an enlarged airbox that feeds it with far more air than the stock box could.
Measured results. On the flow bench, AMS measured 91 percent less restriction than the factory intake, referenced to an ideal open inlet. On the dyno, on the same Stage 2 calibration, AMS saw a peak gain of 17 whp at 4,900 rpm and an average of 8.6 whp across the rev range.
Hear the turbos. The open airbox lets you hear the turbo spool and bypass valve release that the factory lid buried. It also pairs with the AMS F-150 Turbo Inlet Tubes for a straight-through path from the grille to the compressor wheels.
Features
- +17 whp peak and +8.6 whp average over stock on the same Stage 2 calibration
- 91 percent less intake restriction than stock on the flow bench
- 98 percent more flow area at the Y-tube restriction: 102 mm ID versus 72.4 mm OEM
- Rotomolded XLPE airbox and tube, much larger than the factory box
- 218 percent more filter frontal area than the factory panel filter
- 42 percent larger duct opening at the factory inlet location
- Open airbox that lets you hear turbo spool and bypass valve release
- Bolts in with no cutting or trimming
California Proposition 65 warning applies to this product.
Fitment: AMS lists the 2021+ Ford F-150 Raptor with the 3.5L EcoBoost, and the 2021+ F-150 with the 2.7L EcoBoost or the 3.5L EcoBoost (excluding PowerBoost). Fitment confirmed against AMS's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor (3.5L EcoBoost) |
| 2021+ | Ford | F-150 | 2.7L EcoBoost |
| 2021+ | Ford | F-150 | 3.5L EcoBoost (excl. PowerBoost) |
$1,099.95
The AMS High Mount Intercooler moves charge air cooling for the Ford F-150 Raptor 3.5L EcoBoost up behind the upper grille and puts a much bigger core in its place. This listing is the black powder coat version with no logo on the core. It also frees the lower bumper opening for a winch or a frame-cut Baja or prerunner style bumper.
Why it moves up top. Ford hangs the OEM intercooler low in the front bumper, exactly where a winch or frame-cut bumper wants to mount. Relocating the intercooler behind the upper grille hands that space back, and because the core no longer has to squeeze into what is left down low, it can grow: a 24 x 14 x 3.5 inch core, 1,176 cubic inches against 552 for the factory unit, which is 113 percent more volume.
Built for the trail. The bar and plate core is built to custom AMS fin and tube geometry. A gusseted 1 inch 304 stainless steel lower support bar carries the core and is overbuilt for what the front of an off-road truck takes, and a 304 stainless upper support bracket locates it from the top.
Smooth, easy plumbing. CAD-designed cast aluminum end tanks feed the core through 3 inch ports at both ends, and the cast outlet tube has the blow-off valve mount in the casting, ready for the factory valve or a Turbosmart VeePort. A drain plug at the low point of the system makes servicing easier, and the intercooler connects to the factory intercooler piping.
Features
- Core volume more than double the OEM intercooler
- Bar and plate core built to custom AMS fin and tube geometry
- High mount design clears the lower opening for a winch or frame-cut off-road bumper
- Gusseted 1 inch 304 stainless lower support bar
- 304 stainless upper support bracket
- CAD-designed cast aluminum end tanks for improved flow and durability
- 3 inch cast inlet and outlet, a good starting point for custom intercooler piping
- Cast outlet tube with integrated blow-off valve mount, compatible with the OEM valve or Turbosmart VeePort
- Drain plug at the low point of the intercooler system
- Retains factory intercooler piping fitment
- Black powder coat finish, no logo on the core
California Proposition 65 warning applies to this product.
Fitment: AMS lists the 2017+ Ford F-150 Raptor with the 3.5L EcoBoost and the 2017+ F-150 with the 2.7L or 3.5L EcoBoost (all sub-models). Fitment confirmed against AMS's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor (3.5L EcoBoost) |
| 2017+ | Ford | F-150 | 2.7L EcoBoost (all sub-models) |
| 2017+ | Ford | F-150 | 3.5L EcoBoost (all sub-models) |
$1,099.95
The AMS High Mount Intercooler moves charge air cooling for the Ford F-150 Raptor 3.5L EcoBoost up behind the upper grille and puts a much bigger core in its place. This listing is the black powder coat version with the AMS logo on the core. It also frees the lower bumper opening for a winch or a frame-cut Baja or prerunner style bumper.
Why it moves up top. Ford hangs the OEM intercooler low in the front bumper, exactly where a winch or frame-cut bumper wants to mount. Relocating the intercooler behind the upper grille hands that space back, and because the core no longer has to squeeze into what is left down low, it can grow: a 24 x 14 x 3.5 inch core, 1,176 cubic inches against 552 for the factory unit, which is 113 percent more volume.
Built for the trail. The bar and plate core is built to custom AMS fin and tube geometry. A gusseted 1 inch 304 stainless steel lower support bar carries the core and is overbuilt for what the front of an off-road truck takes, and a 304 stainless upper support bracket locates it from the top.
Smooth, easy plumbing. CAD-designed cast aluminum end tanks feed the core through 3 inch ports at both ends, and the cast outlet tube has the blow-off valve mount in the casting, ready for the factory valve or a Turbosmart VeePort. A drain plug at the low point of the system makes servicing easier, and the intercooler connects to the factory intercooler piping.
Features
- Core volume more than double the OEM intercooler
- Bar and plate core built to custom AMS fin and tube geometry
- High mount design clears the lower opening for a winch or frame-cut off-road bumper
- Gusseted 1 inch 304 stainless lower support bar
- 304 stainless upper support bracket
- CAD-designed cast aluminum end tanks for improved flow and durability
- 3 inch cast inlet and outlet, a good starting point for custom intercooler piping
- Cast outlet tube with integrated blow-off valve mount, compatible with the OEM valve or Turbosmart VeePort
- Drain plug at the low point of the intercooler system
- Retains factory intercooler piping fitment
- Black powder coat finish with the AMS logo on the core
California Proposition 65 warning applies to this product.
Fitment: AMS lists the 2017+ Ford F-150 Raptor with the 3.5L EcoBoost and the 2017+ F-150 with the 2.7L or 3.5L EcoBoost (all sub-models). Fitment confirmed against AMS's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor (3.5L EcoBoost) |
| 2017+ | Ford | F-150 | 2.7L EcoBoost (all sub-models) |
| 2017+ | Ford | F-150 | 3.5L EcoBoost (all sub-models) |
$1,099.95
The AMS High Mount Intercooler moves charge air cooling for the Ford F-150 Raptor 3.5L EcoBoost up behind the upper grille and puts a much bigger core in its place. This listing is the silver (uncoated) version with a bare core and no logo sprayed on it. It also frees the lower bumper opening for a winch or a frame-cut Baja or prerunner style bumper.
Why it moves up top. Ford hangs the OEM intercooler low in the front bumper, exactly where a winch or frame-cut bumper wants to mount. Relocating the intercooler behind the upper grille hands that space back, and because the core no longer has to squeeze into what is left down low, it can grow: a 24 x 14 x 3.5 inch core, 1,176 cubic inches against 552 for the factory unit, which is 113 percent more volume.
Built for the trail. The bar and plate core is built to custom AMS fin and tube geometry. A gusseted 1 inch 304 stainless steel lower support bar carries the core and is overbuilt for what the front of an off-road truck takes, and a 304 stainless upper support bracket locates it from the top.
Smooth, easy plumbing. CAD-designed cast aluminum end tanks feed the core through 3 inch ports at both ends, and the cast outlet tube has the blow-off valve mount in the casting, ready for the factory valve or a Turbosmart VeePort. A drain plug at the low point of the system makes servicing easier, and the intercooler connects to the factory intercooler piping.
Features
- Core volume more than double the OEM intercooler
- Bar and plate core built to custom AMS fin and tube geometry
- High mount design clears the lower opening for a winch or frame-cut off-road bumper
- Gusseted 1 inch 304 stainless lower support bar
- 304 stainless upper support bracket
- CAD-designed cast aluminum end tanks for improved flow and durability
- 3 inch cast inlet and outlet, a good starting point for custom intercooler piping
- Cast outlet tube with integrated blow-off valve mount, compatible with the OEM valve or Turbosmart VeePort
- Drain plug at the low point of the intercooler system
- Retains factory intercooler piping fitment
- Silver (uncoated) finish, no logo on the core
California Proposition 65 warning applies to this product.
Fitment: AMS lists the 2017+ Ford F-150 Raptor with the 3.5L EcoBoost and the 2017+ F-150 with the 2.7L or 3.5L EcoBoost (all sub-models). Fitment confirmed against AMS's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor (3.5L EcoBoost) |
| 2017+ | Ford | F-150 | 2.7L EcoBoost (all sub-models) |
| 2017+ | Ford | F-150 | 3.5L EcoBoost (all sub-models) |
$1,099.95
The AMS High Mount Intercooler moves charge air cooling for the Ford F-150 Raptor 3.5L EcoBoost up behind the upper grille and puts a much bigger core in its place. This listing is the silver (uncoated) version with the AMS logo on the core. It also frees the lower bumper opening for a winch or a frame-cut Baja or prerunner style bumper.
Why it moves up top. Ford hangs the OEM intercooler low in the front bumper, exactly where a winch or frame-cut bumper wants to mount. Relocating the intercooler behind the upper grille hands that space back, and because the core no longer has to squeeze into what is left down low, it can grow: a 24 x 14 x 3.5 inch core, 1,176 cubic inches against 552 for the factory unit, which is 113 percent more volume.
Built for the trail. The bar and plate core is built to custom AMS fin and tube geometry. A gusseted 1 inch 304 stainless steel lower support bar carries the core and is overbuilt for what the front of an off-road truck takes, and a 304 stainless upper support bracket locates it from the top.
Smooth, easy plumbing. CAD-designed cast aluminum end tanks feed the core through 3 inch ports at both ends, and the cast outlet tube has the blow-off valve mount in the casting, ready for the factory valve or a Turbosmart VeePort. A drain plug at the low point of the system makes servicing easier, and the intercooler connects to the factory intercooler piping.
Features
- Core volume more than double the OEM intercooler
- Bar and plate core built to custom AMS fin and tube geometry
- High mount design clears the lower opening for a winch or frame-cut off-road bumper
- Gusseted 1 inch 304 stainless lower support bar
- 304 stainless upper support bracket
- CAD-designed cast aluminum end tanks for improved flow and durability
- 3 inch cast inlet and outlet, a good starting point for custom intercooler piping
- Cast outlet tube with integrated blow-off valve mount, compatible with the OEM valve or Turbosmart VeePort
- Drain plug at the low point of the intercooler system
- Retains factory intercooler piping fitment
- Silver (uncoated) finish with the AMS logo on the core
California Proposition 65 warning applies to this product.
Fitment: AMS lists the 2017+ Ford F-150 Raptor with the 3.5L EcoBoost and the 2017+ F-150 with the 2.7L or 3.5L EcoBoost (all sub-models). Fitment confirmed against AMS's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor (3.5L EcoBoost) |
| 2017+ | Ford | F-150 | 2.7L EcoBoost (all sub-models) |
| 2017+ | Ford | F-150 | 3.5L EcoBoost (all sub-models) |
$674.96
The AMS Stock Location Intercooler is a bolt-in replacement for the factory intercooler on the Ford F-150 Raptor with the 3.5L EcoBoost. This listing is the black powder coat version with no logo on the core. It keeps the factory mounting locations and piping while giving the twin turbos a much larger, more efficient cooler to work with.
The largest OEM-location core. AMS says this is the largest intercooler core on the market that fits the factory location for this platform: 21 x 10.25 x 5.5 inches of bar and plate construction, 115% larger than stock and more than double the OEM core volume.
Cooler air, more efficient. After a 12-second pull, AMS measured up to 80 degrees cooler charge air than the OEM intercooler, with up to 93% intercooler efficiency versus as low as 59% for the stock unit. Pressure drop is 20.5% lower than OEM.
Real power on the same tune. On the same calibration with no tuning changes, AMS's test Raptor picked up 12.3 wheel horsepower while running nearly 2 PSI less boost. A calibration optimized for this intercooler can use the cooler charge temperatures and lower pressure drop even further.
Built to last. Flow-optimized cast end tanks, chamfered inlets and a sharp-edge-free airflow path improve flow and durability, and an integrated drain port makes servicing easier. It works with popular aftermarket blow-off valves, including the Turbosmart VeePort.
Features
- Largest OEM-location intercooler core on the market for the 2.7L and 3.5L EcoBoost F-150 and Raptor
- 115% larger than stock, more than double the OEM core volume
- Up to 80 degree charge air temperature advantage over OEM after a 12-second pull
- 12.3 WHP gain while running nearly 2 PSI less boost than the OEM intercooler, with no calibration changes
- 20.5% reduction in pressure drop compared to the OEM intercooler
- Up to 93% intercooler efficiency versus as low as 59% for OEM
- Cast end tanks, chamfered inlets and a smooth airflow path
- Integrated drain port
- Retains the factory mounting locations and piping fitment
- Black powder coat finish with no logo on the core
California Proposition 65 warning applies to this product.
Fitment: AMS lists the 2017+ Ford F-150 Raptor with the 3.5L EcoBoost, the 2015+ F-150 with the 2.7L or 3.5L EcoBoost, and the 2021+ F-150 PowerBoost (which needs the external speaker deleted or the AMS External Speaker Relocation Bracket, AMS.55.09.0001-5). Fitment confirmed against AMS's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor (3.5L EcoBoost) |
| 2015+ | Ford | F-150 | 2.7L EcoBoost |
| 2015+ | Ford | F-150 | 3.5L EcoBoost |
| 2021+ | Ford | F-150 | 3.5L PowerBoost (needs speaker delete or AMS.55.09.0001-5 bracket) |
$674.96
The AMS Stock Location Intercooler is a bolt-in replacement for the factory intercooler on the Ford F-150 Raptor with the 3.5L EcoBoost. This listing is the black powder coat version with the AMS logo on the core. It keeps the factory mounting locations and piping while giving the twin turbos a much larger, more efficient cooler to work with.
The largest OEM-location core. AMS says this is the largest intercooler core on the market that fits the factory location for this platform: 21 x 10.25 x 5.5 inches of bar and plate construction, 115% larger than stock and more than double the OEM core volume.
Cooler air, more efficient. After a 12-second pull, AMS measured up to 80 degrees cooler charge air than the OEM intercooler, with up to 93% intercooler efficiency versus as low as 59% for the stock unit. Pressure drop is 20.5% lower than OEM.
Real power on the same tune. On the same calibration with no tuning changes, AMS's test Raptor picked up 12.3 wheel horsepower while running nearly 2 PSI less boost. A calibration optimized for this intercooler can use the cooler charge temperatures and lower pressure drop even further.
Built to last. Flow-optimized cast end tanks, chamfered inlets and a sharp-edge-free airflow path improve flow and durability, and an integrated drain port makes servicing easier. It works with popular aftermarket blow-off valves, including the Turbosmart VeePort.
Features
- Largest OEM-location intercooler core on the market for the 2.7L and 3.5L EcoBoost F-150 and Raptor
- 115% larger than stock, more than double the OEM core volume
- Up to 80 degree charge air temperature advantage over OEM after a 12-second pull
- 12.3 WHP gain while running nearly 2 PSI less boost than the OEM intercooler, with no calibration changes
- 20.5% reduction in pressure drop compared to the OEM intercooler
- Up to 93% intercooler efficiency versus as low as 59% for OEM
- Cast end tanks, chamfered inlets and a smooth airflow path
- Integrated drain port
- Retains the factory mounting locations and piping fitment
- Black powder coat finish with the AMS logo on the core
California Proposition 65 warning applies to this product.
Fitment: AMS lists the 2017+ Ford F-150 Raptor with the 3.5L EcoBoost, the 2015+ F-150 with the 2.7L or 3.5L EcoBoost, and the 2021+ F-150 PowerBoost (which needs the external speaker deleted or the AMS External Speaker Relocation Bracket, AMS.55.09.0001-5). Fitment confirmed against AMS's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor (3.5L EcoBoost) |
| 2015+ | Ford | F-150 | 2.7L EcoBoost |
| 2015+ | Ford | F-150 | 3.5L EcoBoost |
| 2021+ | Ford | F-150 | 3.5L PowerBoost (needs speaker delete or AMS.55.09.0001-5 bracket) |
$674.96
The AMS Stock Location Intercooler is a bolt-in replacement for the factory intercooler on the Ford F-150 Raptor with the 3.5L EcoBoost. This listing is the silver (uncoated) version with no logo on the core. It keeps the factory mounting locations and piping while giving the twin turbos a much larger, more efficient cooler to work with.
The largest OEM-location core. AMS says this is the largest intercooler core on the market that fits the factory location for this platform: 21 x 10.25 x 5.5 inches of bar and plate construction, 115% larger than stock and more than double the OEM core volume.
Cooler air, more efficient. After a 12-second pull, AMS measured up to 80 degrees cooler charge air than the OEM intercooler, with up to 93% intercooler efficiency versus as low as 59% for the stock unit. Pressure drop is 20.5% lower than OEM.
Real power on the same tune. On the same calibration with no tuning changes, AMS's test Raptor picked up 12.3 wheel horsepower while running nearly 2 PSI less boost. A calibration optimized for this intercooler can use the cooler charge temperatures and lower pressure drop even further.
Built to last. Flow-optimized cast end tanks, chamfered inlets and a sharp-edge-free airflow path improve flow and durability, and an integrated drain port makes servicing easier. It works with popular aftermarket blow-off valves, including the Turbosmart VeePort.
Features
- Largest OEM-location intercooler core on the market for the 2.7L and 3.5L EcoBoost F-150 and Raptor
- 115% larger than stock, more than double the OEM core volume
- Up to 80 degree charge air temperature advantage over OEM after a 12-second pull
- 12.3 WHP gain while running nearly 2 PSI less boost than the OEM intercooler, with no calibration changes
- 20.5% reduction in pressure drop compared to the OEM intercooler
- Up to 93% intercooler efficiency versus as low as 59% for OEM
- Cast end tanks, chamfered inlets and a smooth airflow path
- Integrated drain port
- Retains the factory mounting locations and piping fitment
- Silver (uncoated) finish with no logo on the core
California Proposition 65 warning applies to this product.
Fitment: AMS lists the 2017+ Ford F-150 Raptor with the 3.5L EcoBoost, the 2015+ F-150 with the 2.7L or 3.5L EcoBoost, and the 2021+ F-150 PowerBoost (which needs the external speaker deleted or the AMS External Speaker Relocation Bracket, AMS.55.09.0001-5). Fitment confirmed against AMS's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor (3.5L EcoBoost) |
| 2015+ | Ford | F-150 | 2.7L EcoBoost |
| 2015+ | Ford | F-150 | 3.5L EcoBoost |
| 2021+ | Ford | F-150 | 3.5L PowerBoost (needs speaker delete or AMS.55.09.0001-5 bracket) |
$674.96
The AMS Stock Location Intercooler is a bolt-in replacement for the factory intercooler on the Ford F-150 Raptor with the 3.5L EcoBoost. This listing is the silver (uncoated) version with the AMS logo on the core. It keeps the factory mounting locations and piping while giving the twin turbos a much larger, more efficient cooler to work with.
The largest OEM-location core. AMS says this is the largest intercooler core on the market that fits the factory location for this platform: 21 x 10.25 x 5.5 inches of bar and plate construction, 115% larger than stock and more than double the OEM core volume.
Cooler air, more efficient. After a 12-second pull, AMS measured up to 80 degrees cooler charge air than the OEM intercooler, with up to 93% intercooler efficiency versus as low as 59% for the stock unit. Pressure drop is 20.5% lower than OEM.
Real power on the same tune. On the same calibration with no tuning changes, AMS's test Raptor picked up 12.3 wheel horsepower while running nearly 2 PSI less boost. A calibration optimized for this intercooler can use the cooler charge temperatures and lower pressure drop even further.
Built to last. Flow-optimized cast end tanks, chamfered inlets and a sharp-edge-free airflow path improve flow and durability, and an integrated drain port makes servicing easier. It works with popular aftermarket blow-off valves, including the Turbosmart VeePort.
Features
- Largest OEM-location intercooler core on the market for the 2.7L and 3.5L EcoBoost F-150 and Raptor
- 115% larger than stock, more than double the OEM core volume
- Up to 80 degree charge air temperature advantage over OEM after a 12-second pull
- 12.3 WHP gain while running nearly 2 PSI less boost than the OEM intercooler, with no calibration changes
- 20.5% reduction in pressure drop compared to the OEM intercooler
- Up to 93% intercooler efficiency versus as low as 59% for OEM
- Cast end tanks, chamfered inlets and a smooth airflow path
- Integrated drain port
- Retains the factory mounting locations and piping fitment
- Silver (uncoated) finish with the AMS logo on the core
California Proposition 65 warning applies to this product.
Fitment: AMS lists the 2017+ Ford F-150 Raptor with the 3.5L EcoBoost, the 2015+ F-150 with the 2.7L or 3.5L EcoBoost, and the 2021+ F-150 PowerBoost (which needs the external speaker deleted or the AMS External Speaker Relocation Bracket, AMS.55.09.0001-5). Fitment confirmed against AMS's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor (3.5L EcoBoost) |
| 2015+ | Ford | F-150 | 2.7L EcoBoost |
| 2015+ | Ford | F-150 | 3.5L EcoBoost |
| 2021+ | Ford | F-150 | 3.5L PowerBoost (needs speaker delete or AMS.55.09.0001-5 bracket) |
$359.96
The AMS Turbo Inlet Tubes remove the restrictive factory bottleneck between the intake system and the turbochargers on the 2021-2023 Ford F-150 Raptor 3.5L EcoBoost. Bigger tubes mean less restriction, so the turbos get more air with less work.
Bigger flow path. The tubes have up to 158% more cross-sectional area than the OEM tubes, and organically shaped flow paths keep air moving smoothly through the direction changes. At equivalent power levels AMS measured up to 2.6 PSI less inlet restriction.
Easier on the turbos. Lower inlet restriction lets the turbochargers run more efficiently, with lower shaft speeds, reduced charge air and exhaust gas temperatures and less overall turbo stress. It also leaves headroom for higher power levels once the truck is tuned.
Installs like factory. The tubes keep all OEM fittings and connections, have wire-reinforced couplers with notch alignment for a correct fit, and work with the factory intake system and most aftermarket intakes while keeping an OEM look and feel.
Features
- Up to 2.6 PSI less turbo inlet restriction at equivalent power levels
- Up to 158% larger cross section than OEM, reducing turbo inlet restriction
- Organically shaped to give smooth flow through direction changes
- Wire-reinforced couplers with notch alignment
- Compatible with the OEM intake system and most aftermarket intakes
- Retains all OEM fittings and connections
Not for every 2021+ truck: these tubes do not fit trucks with the 2.0kW Pro Power Onboard option, any 2024 and newer Raptor, or PowerBoost engines.
California Proposition 65 warning applies to this product.
Fitment: AMS lists the 2021-2023 Ford F-150 Raptor with the 3.5L EcoBoost (excluding trucks with 2.0kW Pro Power Onboard and all 2024+ Raptors), the 2021+ F-150 3.5L EcoBoost (XLT, Lariat, King Ranch, Platinum and Tremor, excluding PowerBoost and Pro Power) and the 2022+ Expedition 3.5L EcoBoost. Fitment confirmed against AMS's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2023 | Ford | F-150 | Raptor (excl. 2.0kW Pro Power Onboard) |
| 2021+ | Ford | F-150 | XLT, Lariat, King Ranch, Platinum, Tremor (3.5L EcoBoost, excl. PowerBoost and Pro Power) |
| 2022+ | Ford | Expedition | 3.5L EcoBoost |
These King 3.5 rear bypass shocks fit the 2021-2026 Ford F-150 Raptor and the 2023-2025 F-150 Raptor R. They use a fully adjustable four-tube bypass design with finned external reservoirs, and King tunes the damping for the Raptor.
Fully adjustable bypass. The four-tube bypass design lets you adjust compression and rebound, and it builds in a bump zone near the end of travel for better bottoming control on hard hits.
Large 3.5 inch body. The bigger body holds more fluid for smoother, cooler running and steadier damping on long, rough runs.
Finned reservoirs. The external finned reservoirs add fluid capacity and heat dissipation, which keeps damping consistent when the truck is driven hard.
Bolt-on install. The shocks bolt in with no cutting or welding, and they are rebuildable, serviceable and tunable.
Features
- 3.5 inch diameter body
- Fully adjustable 4-tube bypass: compression and rebound
- Built-in bump zone for bottoming control
- Finned external reservoirs
- Fully rebuildable, serviceable and tunable
- Factory tuned for the F-150 Raptor
- 100 percent bolt-on installation
Fitment: 2021-2026 Ford F-150 Raptor and 2023-2025 Ford F-150 Raptor R, 4WD, rear position. Fitment confirmed against King Shocks' published application list.
Guides & Manuals
Installation Instructions (INS-F031)This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2025 | Ford | F-150 | Raptor R |
This aFe POWER Track Series cold air intake is built for the 2023-2026 Ford F-150 Raptor R and its 5.2L supercharged V8. A 100% carbon fiber tube carries filtered air from a large black Pro 5R filter with a carbon fiber top, all inside an open-element housing that gives the Raptor R more airflow, a louder induction sound and a striking look under the hood.
Measured airflow. aFe measured 690 CFM at 7 in of water, about 37% more than the factory intake, with dyno-proven gains of up to +16 HP and +16 lb-ft of torque.
Five-layer Pro 5R filter made for the Raptor R. The 9 in tall, 360-degree radial-flow filter uses pre-oiled black Pro 5R media with five layers of progressively finer cotton gauze. It passes the most air and suits street and track use, and its carbon fiber top was designed specifically for the Raptor R.
Carbon fiber intake tube. The lightweight twill weave tube is 100% carbon fiber with no fiberglass. It was computer designed and tested on the dyno to improve airflow, cut weight and dress up the engine bay.
One-piece housing with a cold-air scoop. The open-element XLPE (cross-linked polyethylene) housing keeps hot engine-bay air away from the filter, and its built-in scoop draws cool air from the top of the radiator support. It uses the truck's factory air inlet.
Direct bolt-on install. Factory mounting locations are used, so there is no cutting or drilling. Stainless-steel clamps and a silicone bellows coupling are included.
Features
- 100% twill weave carbon fiber tube, no fiberglass
- Black Pro 5R filter with carbon fiber top: pre-oiled, washable and reusable
- Open-element housing with built-in cold-air scoop
- Measured flow 690 CFM at 7 in. H2O, 37% more than stock
- Dyno-proven gains of up to +16 HP and +16 lb-ft of torque
- Stainless-steel clamps and silicone bellows coupling included
- Uses factory mounting locations and the factory air inlet
Emissions
aFe states this product is not currently CARB exempt. It is not available for purchase in California or for use on any vehicle registered with the California DMV.
Fitment: aFe lists this intake only for the 2023-2026 Ford F-150 Raptor R with the 5.2L supercharged V8. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2026 | Ford | F-150 | Raptor R |
$2,955.98
This is the KC HiLiTES Gravity Titan 57 in. overhead light bar bundle for the Ford F-150 and F-150 Raptor. It puts a nine-light LED bar above your windshield on vehicle-specific brackets, so you get a long reach of forward light for desert runs, trail work and night driving without drilling a custom mount. The kit arrives with the bar, the light covers, the overhead brackets and a plug-and-play wiring harness with a 3-position switch.
Built to throw light a long way. KC rates this bar at 1,020,500 total candela, 23,776 total lumens and a beam distance of 1,010 m, using a combo beam pattern. Mounted at roof height, that output stays clear of the hood and bumper and gives you reach well past what lower-mounted lights can show.
Amber or white at the switch. The Titan bar carries both amber and white (5000K) light. The included 3-position switch lets you pick the color you need for dust, fog or clear night running, and the harness is plug-and-play so wiring stays simple.
Vehicle-specific overhead brackets. The two black powder-coated overhead brackets are shaped for the F-150 and Raptor roofline and hold the 51.58 in. wide bar above the windshield. Hardware is included.
Sealed for real use. The bar is rated IP68 against dust and water and runs on a 9V to 36V supply, with nine black covers (yellow KC logo) included to protect the lenses on the road and on the trail.
Features
- 57 in. Gravity Titan 9-light LED bar, 51.58 in. x 6.05 in. x 3.27 in.
- Amber and white LEDs, 5000K, combo beam, 1,010 m beam distance
- 1,020,500 total candela, 23,776 total lumens, 10,205 total lux
- Draw: 89.6W / 7.47 A amber, 315.84W / 26.32 A white, 9V-36V
- IP68 rated, clear lens
- 2 overhead light bar brackets, mounting hardware and 9 black light covers included
- Plug-and-play wiring harness with 3-position switch included
Prop 65. KC HiLiTES lists a California Proposition 65 warning for this product.
Fitment: KC lists this overhead light bar system for the 2015-2026 Ford F-150 and Ford Raptor. For RaptorsOnly customers that covers the 2017-2020 and 2021-2026 F-150 Raptor and the 2023-2026 F-150 Raptor R. Fitment confirmed against KC HiLiTES' published application list.
Guides & Manuals
Gravity Titan LED Light Bar Instructions (PDF)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2026 | Ford | F-150 | All |
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$39.99
UMI's leaf spring pin kit includes (4) custom extended length 4140 CrMo locating pins. These pins provide a precision way to center the leaf spring when using lowering systems or pinion angle shims. Factory pins often don't have enough length to do the job. 100% Made in USA.
- 1/2"-20 thread. 4.25" total length. 0.850" Pin length. 3/4" Pin Diameter
- Extended length head for use with pinion angle shims and lowering kits
- Includes Grade 8 hardware
- Tough black zinc coating
- 100% Made in USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2024 | Ford | F-150 | King Ranch |
| 2015-2024 | Ford | F-150 | Lariat |
| 2016-2023 | Ford | F-150 | Limited |
| 2015-2024 | Ford | F-150 | Platinum |
| 2018-2024 | Ford | F-150 | Police Responder |
| 2017-2024 | Ford | F-150 | Raptor |
| 2016-2024 | Ford | F-150 | SSV |
| 2024 | Ford | F-150 | STX |
| 2021-2024 | Ford | F-150 | Tremor |
| 2015-2024 | Ford | F-150 | XL |
| 2015-2024 | Ford | F-150 | XLT |
These Stainless Works long-tube headers are a direct bolt-on for the 2023-2026 Ford F-150 Raptor R with the 5.2L supercharged V8. They use 2 inch primaries, EPA-compliant high-flow catalytic converters and 3 inch lead pipes. Stainless Works states that they do not fit the standard Raptor.
Free-flowing design. The long-tube layout replaces the factory manifolds, and the 3 inch leads connect to the factory exhaust or to a Stainless Works catback.
Built to last. The headers are 304 stainless steel, mandrel bent and TIG welded, and backed by a lifetime warranty.
What is in the kit. Driver and passenger headers, a driver elbow, two high-flow cats, lead pipes, five band clamps, oxygen sensor extensions, a header bolt kit, RTV and installation instructions.
Features
- 2 inch primaries with 3 inch lead pipes
- EPA-compliant high-flow cats
- Direct bolt-on for the Raptor R 5.2L
- 304 stainless steel, mandrel bent, TIG welded
- Lifetime warranty
Fitment: 2023-2026 Ford F-150 Raptor R 5.2L only; not for the standard Raptor. Fitment confirmed against Stainless Works' published application list.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2026 | Ford | F-150 | Raptor R 5.2L |
The MBRP Armor Pro Active muffler replacement is a 3-inch T304 stainless steel muffler swap made exclusively for the 2023-2027 Ford F-150 Raptor R with the 5.2L supercharged V8. It replaces the factory muffler while keeping the factory active valve working, so you can still switch between a more aggressive sound and a quieter daily-driving mode.
Keeps the factory active valve. The system retains the factory Active Valve function, so the exhaust mode switching continues to work as it did from the factory. MBRP notes that the exhaust valve may need a relearn through Ford's FDRS (the PCM Exhaust Tailpipe Actuator Position Relearn app).
More flow than the stock muffler. MBRP reports that dynamometer testing showed a 6% increase in flow over the OEM muffler. The tubing is precision CNC mandrel bent for unrestricted flow.
T304 stainless steel. The construction resists corrosion and rust, and the kit carries MBRP's lifetime warranty.
Bolt-on fit, better clearance. It uses the factory hanger locations, includes the clamps and hardware needed, and its design improves ground clearance.
Features
- 3-inch T304 stainless steel muffler replacement, active profile
- Retains factory active valve function
- Precision CNC mandrel-bent tubing
- MBRP dyno testing: 6% more flow than the OEM muffler
- Uses OEM hanger locations; installation hardware included
- Improved ground clearance
- Lifetime MBRP warranty
Emissions: California Proposition 65 warning applies. This is an exhaust-only part; check local rules for your area.
Fitment: 2023-2027 Ford F-150 Raptor R, 5.2L engine only, SuperCrew short box. MBRP lists this part exclusively for the Raptor R. Fitment confirmed against MBRP's published application list.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2027 | Ford | F-150 | Raptor R |
$67.19
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's 10-Year/Million Mile Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!
Technical Bulletin- REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills
This Part Fits:
Year Make Model Submodel 2023-2026 Ford F-150 Raptor 2019-2020 Ford Mustang Bullitt 2021-2023 Ford Mustang Mach 1 2015-2019 Ford Mustang Shelby GT350 2015-2019 Ford Mustang Shelby GT350R
The Injen X-Pedal Pro Black Edition is a plug-and-play throttle controller that sharpens or softens the throttle response of the 2017-2020 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost. It also covers other F-150 trucks, the 2016-2020 Chevrolet Camaro and the 2011-2020 Dodge Charger listed below.
Throttle response on demand. Nine Sport levels make the pedal feel more eager, and seven Eco levels soften it for smoother, more economical driving. It works with automatic and manual transmissions and processes the pedal signal 1,000 times per second.
Extra functions. An anti-skid setting helps tame the pedal on slippery surfaces, and a launch control mode is built in.
Simple to fit. It plugs into the vehicle harness with the included connectors, so there is no cutting or splicing, and the controller weighs about one pound.
Features
- Nine Sport and seven Eco throttle levels
- Anti-skid and launch control modes
- Plug-and-play harness connectors
- Works with automatic and manual transmissions
- 1,000 pedal-signal updates per second
Fitment: 2017-2020 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost, plus the other vehicles listed below. Fitment confirmed against Injen's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor 3.5L twin turbo |
| 2015-2020 | Ford | F-150 | 2.7L and 3.5L twin turbo |
| 2015-2019 | Ford | F-150 | 5.0L V8 |
| 2016-2020 | Chevrolet | Camaro | 2.0L turbo, 6.2L (SS) |
| 2011-2020 | Dodge | Charger | 3.6L, 5.7L, 6.4L, 6.2L supercharged (2015-2016) |
$1,716.95
ICON multi-rate leaf springs require bump stop spacer kit (PN: 95226) if ICON's hydraulic bump stop kit (PN: 95121) is not used
- “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2021 | Ford | F-150 | Raptor |
The ICON Attitude Adjustment Collar (AAC) is a front leveling kit built for the 2017-2020 Ford F-150 Raptor. It raises the front end between 0.5 and 2.25 inches over stock without taking the factory shock apart, so you can level the truck or add a little rake-correcting stance in an afternoon.
Five lift settings from one kit. A multi-height coil spring collar works with a top-load shim that ICON says can be set up five different ways, giving 0.5 to 2.25 inches of front lift. ICON describes the collar as patent pending.
Keeps the shock in its ride zone. ICON designed the collar and shim around the front-end dimensions of the second-generation Raptor. Other leveling options gain height only by preloading the coil, which ICON says puts the shock in the rebound zone at ride height and hurts ride quality. This kit is made to hold the OE shock in its working range and keep the factory ride.
Simple installation. The shock does not need to be disassembled to fit the kit, which ICON points to as a more straightforward process than other leveling options. The collar also has mounting holes for the 2019-2020 model-specific wire harnesses.
Built to last. The collars are CNC machined from 6061 billet aluminum with a black anodized finish for corrosion resistance. ICON backs the kit with a limited lifetime warranty against component breakage or manufacturer defect.
Features
- 0.5 to 2.25 inches of adjustable front lift over stock
- Multi-height collar plus top-load shim with five configurations
- Keeps the OE shock in the ride zone to maintain factory ride quality
- No shock disassembly required for installation
- Mounting holes for 2019-2020 model-specific wire harnesses
- CNC machined 6061 billet aluminum, black anodized finish
- Lifetime guarantee against component breakage or manufacturer defect
Fitment: ICON lists this kit for the 2017-2020 Ford Raptor (second generation). Fitment confirmed against ICON Vehicle Dynamics' published product page (part number IVD6130B).
Guides & Manuals
Installation InstructionsInstallation Instructions
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
The ICON 98562DJ is a pair of CNC-machined billet aluminum upper control arms built for the Ford F-150 Raptor. They correct front-end geometry that is thrown off when the truck is lifted or leveled, add adjustable camber and caster, and open up clearance around the suspension. The kit comes with ICON's Delta Joint in place of the factory ball joint, and it includes the hardware needed to install it.
Better geometry and on-truck alignment. ICON's double adjuster sleeves let you set camber and caster while the arms stay on the truck, so alignment changes do not mean pulling the arms off the vehicle.
Full bump and droop travel. Swapping out the OE ball joint for the Delta Joint removes the binding that limits travel. The Delta Joint pairs the durability of a ball joint with the angularity of a traditional uniball.
Built for daily driving. A zinc-plated housing gives the first layer of corrosion resistance, and a grease seal keeps dirt and water out of the joint. The metal-on-metal design is greasable, which helps it last and run quietly on the street, unlike an exposed uniball.
Strong, light billet construction. Each arm is machined from 6061 aluminum, which keeps weight down while holding up to hard off-road use. The 7/8 inch FK rod ends are PTFE lined for smooth, precise movement through the full range of travel.
Features
- CNC machined 6061 billet aluminum construction for light weight and exceptional strength
- Camber and caster adjustability allows for precise wheel alignment
- ICON double adjuster sleeves allow for on-vehicle adjustment
- Vehicle specific taper pin provides OE-like fitment
- PTFE Lined 7/8 inch FK Rod Ends for improved response
- Built in o-ring sealed dust cover cap
- Features ICON's patented Delta Joint
Fitment: ICON describes this kit as made for the 2010-2020 Ford Raptor. Ford built the F-150 Raptor in 2010-2014 (SVT Raptor) and again in 2017-2020, so those are the model years listed below. ICON publishes no separate vehicle list for this part; fitment confirmed against the application stated on ICON's product page.
Guides & Manuals
Installation InstructionsInstallation Instructions
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
| 2010-2014 | Ford | F-150 | SVT Raptor |
The ICON 1.5-inch Rear Bump Stop Spacer Kit is built for 2017-2020 Ford F-150 Raptors that run ICON Multi-Rate Leaf Springs. It drops the factory rear bump stops 1.5 inches so the stock stops sit where they should once the springs are changed.
Keeps correct suspension travel. ICON says the spacers reposition the stock bump stops to maintain proper travel and let you keep using the OE bump stops without over-cycling the ICON leaf springs. This kit is for trucks running the ICON Multi-Rate Leaf Springs, as ICON specifies.
Machined from 6061 aluminum. Each spacer is precision CNC machined from high-strength 6061 aluminum, so it is durable and adds very little weight to the rear of the truck.
Bolt-on installation. The design is a straightforward bolt-on, and the mounting hardware is included in the kit, as the photo shows: two spacers and two bolts.
Features
- Lowers the factory rear bump stops 1.5"
- Lets the stock rear bump stops be used with ICON Multi-Rate Leaf Springs
- Precision CNC machined from 6061 aluminum
- Mounting hardware included
- Simple bolt-on installation
Fitment: ICON's product page title for this part says 2010-2014, but ICON's description specifies 2017-2020 Ford F-150 Raptor models equipped with ICON Multi-Rate Leaf Springs, and ICON lists a separate part for the 2010-2014 Raptor. We used the 2017-2020 application from ICON's description. Fitment confirmed against ICON's published product description.
Guides & Manuals
Installation InstructionsInstallation Instructions
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
This ICON hardware kit is the mounting hardware that goes with the ICON Multi Rate Leaf Spring Pack, part number 198510, on the 2017-2020 Ford F-150 Raptor. If you are fitting the new leaf springs, this is the kit that lets you bolt them in.
Made to pair with the 198510 spring pack. ICON designed this kit for use with its Multi Rate Leaf Spring Pack. It is not a stand-alone suspension upgrade, so order it together with the leaf spring pack.
U-bolts and hardware in one kit. The kit includes U-bolts and all the hardware needed, so you are not hunting for fasteners in the middle of the install.
Specific to the Raptor. ICON lists this kit for the 2017-2020 Ford Raptor pickup.
Features
- Use in conjunction with ICON leaf spring pack 198510
- Includes U-bolts and all hardware
- Listed by ICON for the 2017-2020 Ford Raptor pickup
Fitment: ICON lists this kit for the 2017-2020 Ford Raptor pickup. Fitment confirmed against ICON Vehicle Dynamics' published product listing for part 95225H.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
The ICON 198510 multi-rate leaf spring is a direct bolt-in replacement for the factory rear leaf pack on the 2017-2020 Ford F-150 Raptor. It is built to ride slightly softer than stock, then stiffen up when you add weight, so one spring suits a bare truck or a fully loaded build.
Smoother over rough ground. ICON set the base spring rate a little lighter than factory, since the stock rate runs stiff on small, choppy terrain. The result is better ride quality and extra droop travel at the rear axle.
Three spring rates in one kit. An add-in leaf ships with the spring. Swapping it in or adding it to the pack raises the rate by 20% or 40% over the as-shipped setting. On the Raptor, the as-shipped Option 1 gives about +1.00 in. of lift over stock unloaded, Option 2 about +2.25 in. unloaded, and Option 3 about +3.00 in. unloaded, according to ICON. Option 2 holds about +1.00 in. with a 400 lb constant load, and Option 3 holds about +0.50 in. with an 850 lb constant load. That suits spare tires, chase racks, roof-top tents and other added rear weight.
Built to last off-road. A triple military wrap on the front eyelet and a half wrap on the rear eyelet add strength and durability. A rebound leaf helps limit axle wrap, and leaf separators and tip inserts cut noise and friction.
- "ICON 1K" tested under rigorous off-road conditions to validate tune, performance, strength, and durability
- Leaf separators and tip inserts reduce noise and friction while increasing ride comfort
- Triple military wrap front eyelet and rear half wrap for increased durability
- Direct bolt-in to OEM spring location makes for an easy install
- 3 user-adjustable spring rates for unique vehicle setups
- Rebound leaf reduces severe axle wrap
Emissions: Not an emissions-controlled part. Prop 65 warning applies per the supplier listing.
Fitment: ICON lists this leaf spring for the 2017-2020 Ford F-150 Raptor. ICON also approves it on 2021-2026 F-150 XL, XLT, STX, Lariat, King Ranch, Platinum and Tremor models, not the Raptor, when used with ICON 2.5 Aluminum Series rear shocks. Fitment confirmed against ICON's published application information.
Guides & Manuals
Installation InstructionsInstallation Instructions
Installation Instructions
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
The Go Fast Bits T9464 is a VTA (vent to atmosphere) valve for the 2017-2020 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost, and for the 2013-2020 F-150 with the 2.7L or 3.5L EcoBoost. It replaces the factory diverter so boost pressure is released to the atmosphere, giving the classic blow-off sound.
Works with the factory system. The valve keeps the factory ECU and solenoid in use, so it is a bolt-in change with no tune. A stainless bracket matches the original diverter mount.
Engineered by GFB. The valve uses GFB's TMS technology and is made in Australia. A blanking plug is included for the factory recirculation port.
Features
- Vent-to-atmosphere design with blow-off sound
- Stainless bracket that matches the OEM diverter mount
- Blanking plug included
- Keeps the factory ECU and solenoid
- Made in Australia
Emissions
GFB lists no CARB approval for this valve, and venting to atmosphere is not legal on emissions-controlled road vehicles in California or other CARB states. Prop 65 warning applies.
Fitment: 2017-2020 Ford F-150 Raptor with the 3.5L EcoBoost, plus the 2013-2020 F-150 2.7L and 3.5L EcoBoost. Fitment confirmed against GFB's published application list.
Guides & Manuals
Installation InstructionsProduct Flyer
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor 3.5L EcoBoost |
| 2013-2020 | Ford | F-150 | 2.7L and 3.5L EcoBoost |
These Eibach Pro-Lift-Kit front springs raise the front of a 2023-2026 Ford F-150 Raptor R with the 5.2L supercharged V8. The kit is a set of two coil springs that swap in for the factory fronts, so you gain ride height and tire clearance without spacers or a coilover conversion.
Front-only lift for the Raptor R. This part is a front lift only: it changes the front springs and leaves the rear alone. Eibach lists it for the 4WD Raptor R only.
Keeps the factory suspension working. The springs are designed to work with the stock upper mounts and control arms, and Eibach says they preserve the full range of suspension travel and avoid the extra stress on bushings and ball joints that spacer lifts can add.
Made for the factory electronic shocks. Eibach notes the kit is designed to be used with the original FOX electronic shocks, so the stock damper setup stays in place.
Built in the USA with a five-year warranty. Eibach makes these springs in the U.S. and covers them for five years against defects in material and workmanship under normal use.
Features
- Set of 2 front coil springs
- Front lift only, for the 2023-2026 F-150 Raptor R 5.2L Supercharged 4WD
- More ground clearance and room for larger wheels and tires
- Designed to use the factory FOX electronic shocks
- Made in the U.S.A.
- Five-year Eibach warranty
Emissions
Prop 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. See www.P65Warnings.ca.gov.
Fitment: Eibach lists this kit for the 2023-2026 Ford F-150 Raptor R 5.2L Supercharged 4WD (3rd Gen). Eibach states it does not guarantee fitment, height or warranty on unlisted applications. Fitment confirmed against Eibach's published application list.
Guides & Manuals
Installation Instructions (D4209)This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2026 | Ford | F-150 | Raptor R |
The Eibach Pro-Lift-Kit for the 2023-2026 Ford F-150 Raptor R is a set of four coil springs that raises the truck 2.5 inches in front and 1.5 inches in the rear. It is built for Raptor R owners who want more clearance and a more aggressive stance without swapping the factory shocks or other suspension parts.
A lift that keeps the factory hardware. The springs replace the stock coils and work with the factory upper mounts and control arms, so the truck keeps its original suspension geometry and ride character instead of relying on spacers.
Made for the factory Fox electronic shocks. Eibach designs this kit around the Raptor R's OE Fox electronic shocks. Eibach does not guarantee fitment, ride height or warranty coverage on applications it does not list.
More room for bigger tires. The added ride height gives extra fender clearance for larger wheels and tires. Check clearance for your exact wheel and tire size, since some owners trim plastic wheel well liners or skid plate edges when running very large tires.
Ground clearance for off-road driving. Raising the ride height adds clearance under the truck for trails, washouts and rough terrain, while Eibach designs the kit for good on-road stability and handling.
Features
- Set of 4 coil springs: front and rear pairs for the Raptor R
- 2.5 inch front lift and 1.5 inch rear lift
- Retains the factory upper mounts and control arms
- Designed to work with the OE Fox electronic shocks
- Made in the U.S.A.
- Five-year Eibach warranty
Warning: Eibach lists a California Proposition 65 warning for this product: it can expose you to chemicals known to the State of California to cause cancer and reproductive harm.
Fitment: Eibach lists this kit for the 2023-2026 Ford F-150 Raptor R with the 5.2L supercharged engine, 4WD, 3rd generation. Fitment confirmed against Eibach's published application list.
Guides & Manuals
Installation InstructionsEibach Warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2026 | Ford | F-150 | Raptor R |
These Eibach Pro-Lift-Kit front springs raise the front end of a 2023-2026 Ford F-150 Raptor R by swapping the factory coil springs for taller, race-developed ones. The kit is front only and comes as a set of two springs, so you get more ground clearance and more room for bigger wheels and tires without changing the rest of the front suspension.
A lift that keeps the factory hardware. Because the springs drop in where the originals sit, the stock upper mounts and control arms stay in the truck. There are no spacers stacked on the strut, so the suspension keeps its full travel and your bushings and ball joints are not asked to work at new angles.
Built for the Raptor R's electronic shocks. Eibach designed this kit to be used with the original Fox electronic shocks, so you keep the adaptive damping the truck came with instead of replacing it with a coilover system.
Ride and handling. The goal is a lift with a tasteful amount of added height while keeping on-road stability and handling close to stock, which matters on a truck that spends its week on pavement and its weekend on the trail.
Made in the U.S.A. and backed by a warranty. Eibach builds these springs in the United States and covers them with a five-year warranty against defects in material and workmanship (coatings excluded) on passenger cars and light-duty trucks under normal use.
Features
- Set of 2 front coil springs, front only
- Increases front ground clearance
- More fender clearance for larger wheels and tires
- Keeps the stock upper mounts and control arms
- Designed to use the original Fox electronic shocks
- Made in the U.S.A.
- Five-year warranty
Emissions and safety. This is a chassis part with no emissions content. Prop 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. See www.P65Warnings.ca.gov.
Fitment: 2023-2026 Ford F-150 Raptor R with the 5.2L supercharged V8, 4WD. Eibach lists no other vehicle for this part and does not guarantee fitment on unlisted applications. Fitment confirmed against Eibach's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2026 | Ford | F-150 | Raptor R 5.2L Supercharged 4WD |
The Eibach Pro-Alignment Kit is a set of machined camber and caster adjusters for the front suspension of the Ford F-150. Lifting or lowering a truck changes the geometry of the front end, and once the change is large enough the factory alignment settings can no longer be reached. This kit gives your alignment shop the extra range to bring the front wheels back into specification after a suspension change.
Adds adjustment range where the stock parts run out. Eibach lists the kit as a camber nut and bracket set that provides about 1.0 degree of camber and 1.5 degrees of caster adjustment at the front. That is the margin a shop needs to set a Raptor that sits higher or lower than stock.
Helps protect your tires. Camber that is out of range wears the inside or outside edge of a tire quickly. Getting the angles back where they belong keeps the tread wearing evenly and the truck tracking straight.
Suited to daily driving or tuned setups. The larger adjustment window lets an experienced alignment technician fine-tune the settings for road use or for a more performance-minded setup, instead of only returning to the factory numbers.
Backed by the maker. Eibach covers the kit with a two-year warranty against defects in material and workmanship under normal use.
Features
- Camber nut and bracket kit for the front suspension
- About +/-1.0 degree of camber and +/-1.5 degrees of caster adjustment
- Wider adjustment range than the factory hardware
- Helps prevent uneven tire wear after a lift or lowering kit
- Two-year Eibach warranty
Emissions: Not an emissions-related part. California Proposition 65 warning applies: Cancer and Reproductive Harm, www.P65Warnings.ca.gov.
Fitment: For the Raptor, Eibach lists the 2010-2014 F-150 SVT Raptor and the 2017-2018 F-150 Raptor. Eibach does not list the 2019-2020 F-150 Raptor, the 2021 and newer F-150 Raptor or the Raptor R for this kit. The table also shows the other F-150 applications Eibach names. Fitment confirmed against Eibach's published application list.
Guides & Manuals
Installation InstructionsWarranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2009-2013 | Ford | F-150 | 4WD (excludes SVT Raptor) |
| 2009-2013 | Ford | F-150 | 2WD |
| 2004-2008 | Ford | F-150 | 2WD |
| 2014 | Ford | F-150 | 4WD |
| 2014 | Ford | F-150 | 2WD |
| 2015-2020 | Ford | F-150 | SuperCrew 3.5L V6 EcoBoost 4WD |
| 2017-2018 | Ford | F-150 | Raptor |
| 2015-2020 | Ford | F-150 | 3.5L V6 EcoBoost 2WD |
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2018-2020 | Ford | F-150 | Diesel 2WD |
| 2015-2020 | Ford | F-150 | SuperCrew 2.7L V6 EcoBoost 4WD |
| 2015-2020 | Ford | F-150 | 2.7L V6 EcoBoost 2WD |
| 2021-2026 | Ford | F-150 | SuperCrew 3.5L V6 EcoBoost 4WD (excludes vehicles with CCD electronic suspension) |
| 2021-2026 | Ford | F-150 | SuperCrew 2.7L V6 EcoBoost 2WD (excludes vehicles with CCD electronic suspension) |
| 2021-2026 | Ford | F-150 | SuperCrew 3.5L V6 EcoBoost 2WD (excludes vehicles with CCD electronic suspension) |
| 2015-2020 | Ford | F-150 | SuperCrew 5.0L 4WD |
| 2021-2026 | Ford | F-150 | PowerBoost SuperCrew 3.5L Hybrid 4WD (excludes vehicles with CCD electronic suspension) |
| 2021-2026 | Ford | F-150 | SuperCrew 5.0L 2WD (excludes vehicles with CCD electronic suspension) |
| 2015-2020 | Ford | F-150 | SuperCrew 5.0L 2WD |
This EBC Stage 9 kit pairs Yellowstuff 4000 series pads with USR fine-slotted rotors for the rear brakes of the 2022-2026 Ford Bronco Raptor. It is EBC's most aggressive street-and-track kit in this family, supplied as one matched set for drivers who want more bite and better heat handling than a standard setup.
Matched pads and rotors. Yellowstuff is an aramid-fiber compound that works from cold and self-seats after installation thanks to its Brake-In surface coating. EBC's high-friction formula is described as improving braking by up to 40% over OE. The pad has a slotted face for cooling and for collecting dust and debris. The pad outline drawing lists a rear pad roughly 149 mm long, 52 mm tall and 16.2 mm thick.
Rotors built for heat. The USR fine-slotted rotors expel gas, dust, debris and moisture more efficiently than a plain rotor, and they are rated to run at up to 800-900 degrees centigrade. A corrosion-resistant silver-gray coating extends service life, and each rotor is inspected and balanced for smooth running.
Right for the job. The kit is suited to performance street driving, street and track events and towing with oversized tires. It is a performance setup, so expect more brake dust than a standard pad.
- Yellowstuff 4000 series high-friction aramid-fiber pads
- Brake-In coating for fast bed-in
- USR fine-slotted vented rotors with corrosion-resistant coating
- Rotors inspected for runout and balanced
- Rear axle kit: pads and rotors supplied together
Fitment: Ford Bronco Raptor 2022-2026 (3.0L), plus other Ford F-150 2021-2026 (2.7L, 3.0L, 3.5L, 5.0L, and 3.3L for 2021-2023; EBC notes 336 mm rear), Ford Expedition 2022-2024 and 2026 (3.5L) and Lincoln Navigator 2022-2024 (3.5L), as listed below. Fitment confirmed against EBC's published application list.
Guides & Manuals
Installation InstructionsWarranty Information
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Ford | Bronco | Raptor (3.0L) |
| 2021-2026 | Ford | F-150 | 2.7L, 3.0L, 3.5L, 5.0L (336 mm rear) |
| 2021-2023 | Ford | F-150 | 3.3L (336 mm rear) |
| 2022-2024 | Ford | Expedition | 3.5L |
| 2026 | Ford | Expedition | 3.5L |
| 2022-2024 | Lincoln | Navigator | 3.5L |
This EBC Stage 2 kit pairs Greenstuff 2000 series pads with USR slotted rotors for the rear brakes of the 2022-2026 Ford Bronco Raptor. The pads and rotors come together as one matched set, so you can refresh the rear axle in a single purchase with parts designed to work with each other.
Matched pads and rotors. Greenstuff is EBC's quiet, low-dust street-performance compound. It is slotted to keep the pad face flat and to clear gas and debris, and it carries a Brake-In surface coating for instant bed-in after installation. EBC describes up to 20% better braking than OEM pads. The pad outline drawing lists a rear pad roughly 149 mm long, 52 mm tall and 16.2 mm thick.
Rotors that stay quiet and resist cracking. The USR rotors use a high-carbon gray-iron casting that helps limit heat cracking, brake shudder and the high-frequency vibration behind squeal. Fine slots expel gas and debris and maintain a flat pad wear surface. The rotors are coated, inspected for runout and balanced before they leave EBC.
Right for the job. Greenstuff suits drivers who want a noticeable street upgrade without a lot of brake dust or noise. It is a street-performance setup with medium dust.
- Greenstuff 2000 series organic pads with Brake-In coating
- USR fine-slotted vented rotors
- Slotted pad design to keep a flat wear surface
- Rotors inspected for runout and balanced
- Rear axle kit: pads and rotors supplied together
Fitment: Ford Bronco Raptor 2022-2026 (3.0L), plus other Ford F-150 2021-2026 (2.7L, 3.0L, 3.5L, 5.0L, and 3.3L for 2021-2023; EBC notes 336 mm rear), Ford Expedition 2022-2024 and 2026 (3.5L) and Lincoln Navigator 2022-2024 (3.5L), as listed below. Fitment confirmed against EBC's published application list.
Guides & Manuals
Installation InstructionsWarranty Information
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Ford | Bronco | Raptor (3.0L) |
| 2021-2026 | Ford | F-150 | 2.7L, 3.0L, 3.5L, 5.0L (336 mm rear) |
| 2021-2023 | Ford | F-150 | 3.3L (336 mm rear) |
| 2022-2024 | Ford | Expedition | 3.5L |
| 2026 | Ford | Expedition | 3.5L |
| 2022-2024 | Lincoln | Navigator | 3.5L |
This EBC Stage 15 kit pairs Extra Duty pads with USR slotted rotors for the rear brakes of the 2022-2026 Ford Bronco Raptor. It is a heavy-duty set built for extreme and fleet-style duty, towing and oversized tires, and it ships as one matched kit so the pads and rotors are designed to work together.
Matched pads and rotors. The Extra Duty pad is the successor to EBC's Orangestuff line, which EBC now supplies in a red ED+ finish. It offers strong friction with a smooth bed-in and a firmer, more responsive pedal feel. EBC says it keeps performance up for longer without the brake fatigue you can get on a standard pad. The pad outline drawing lists a rear pad roughly 149 mm long, 52 mm tall and 16.2 mm thick. The kit also includes caliper lube.
Rotors with a narrow, slotted design. The USR rotors use a narrow, multi-slot pattern that helps clear gas and debris from the pad face. They are made from cast iron with a coating, are listed as meeting OE requirements for a straight fit with the factory setup, and are manufactured in the USA.
Right for the job. The kit is suited to extreme and fleet duty and for towing with oversized tires. It is a high-dust setup, and the pads need regular monitoring, especially after hard use.
- Extra Duty (formerly Orangestuff) pads in EBC's red ED+ finish
- USR slotted cast-iron rotors with coating
- Firmer, more responsive pedal feel
- Direct fit with the factory configuration
- Rear axle kit: pads and rotors supplied together
Fitment: Ford Bronco Raptor 2022-2026 (3.0L), plus other Ford F-150 2021-2026 (2.7L, 3.0L, 3.5L, 5.0L, and 3.3L for 2021-2023; EBC notes 336 mm rear), Ford Expedition 2022-2024 and 2026 (3.5L) and Lincoln Navigator 2022-2024 (3.5L), as listed below. Fitment confirmed against EBC's published application list.
Guides & Manuals
Installation InstructionsWarranty Information
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Ford | Bronco | Raptor (3.0L) |
| 2021-2026 | Ford | F-150 | 2.7L, 3.0L, 3.5L, 5.0L (336 mm rear) |
| 2021-2023 | Ford | F-150 | 3.3L (336 mm rear) |
| 2022-2024 | Ford | Expedition | 3.5L |
| 2026 | Ford | Expedition | 3.5L |
| 2022-2024 | Lincoln | Navigator | 3.5L |
This EBC Stage 8 kit pairs Extra Duty pads with GD slotted and dimpled rotors for the front brakes of the 2017-2020 Ford F-150 Raptor. It is aimed at drivers who want the most bite EBC offers for performance street driving, track days, fleet-style duty cycles or towing with oversized tires, and it ships as one matched set.
Matched pads and rotors. The Extra Duty pad is the successor to EBC's Orangestuff line, which EBC now supplies in a red ED+ finish. Its compound stays stable across a wide temperature range, and the pad surface is pre-scorched so it beds in faster after installation. The friction level is .6 hot and .5 cold, among the highest and fastest-gripping pads EBC makes. The pad outline drawing lists a pad roughly 194 mm long, 68-69 mm tall and 18.1 mm thick.
Rotors that shed heat and debris. The GD rotors have dimpled indents and straight vent slots that expel heat, water, brake dust and friction gas, and a wider vent aperture lets air pass between the two rotor faces. The metal expands evenly in use, which reduces the chance of warping. A silver-gray Geomet-style coating protects the rotors far better than the old black etch finish.
Right for the job. This is EBC's high-grip pairing for trucks that are worked hard. Expect higher brake dust than a street pad, and plan to monitor pad wear if the truck sees heavy use.
- Extra Duty (formerly Orangestuff) high-friction pads
- Pre-scorched pad surface for faster bed-in
- GD slotted and dimpled vented rotors
- Geomet-style silver-gray corrosion-resistant coating
- Front axle kit: pads and rotors supplied together
Fitment: Ford F-150 Raptor 2017-2020 (3.5L), plus other 2015-2017 Ford F-150 (2.7L, 3.5L, 5.0L), as listed below. EBC lists these applications with an electric parking brake, and the 5.0L also with a manual parking brake. Fitment confirmed against EBC's published application list.
Guides & Manuals
Installation InstructionsWarranty Information
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor (3.5L) |
| 2015-2017 | Ford | F-150 | 2.7L, 3.5L (electric parking brake) |
| 2015-2017 | Ford | F-150 | 5.0L (electric or manual parking brake) |
This EBC Stage 3 kit pairs Greenstuff 6000 series pads with GD slotted and dimpled rotors for the front brakes of the 2017-2020 Ford F-150 Raptor. The pads and rotors arrive together as one matched set, built for trucks that work hard and also get driven hard.
Matched pads and rotors. The pads use EBC's Greenstuff 6000 compound, an organic aramid-based formula that is fully shimmed, chamfered and slotted for quiet running. A red Brake-In surface coating lets them brake safely right after installation. EBC describes about 15% better braking than the OE pad, with very low rotor wear. The pad outline drawing lists a pad roughly 194 mm long, 68-69 mm tall and 18.1 mm thick.
Rotors that shed heat and debris. The GD rotors combine wide-aperture slots with blind-drilled dimples. Together they dispel gas, dust, dirt and debris and pull cooler air across the pad and rotor faces to resist fade. They are machined from a high-quality alloy rated to run at up to 800-900 degrees centigrade and finished in a corrosion-resistant silver-gray coating.
Right for the job. Greenstuff is EBC's entry-level performance upgrade for heavier trucks and SUVs, aimed at hard daily use, towing with oversized tires and performance street driving. Expect medium brake dust.
- Greenstuff 6000 series organic pads with Brake-In coating
- GD slotted and dimpled vented rotors
- Fully shimmed, chamfered and slotted pad construction
- Corrosion-resistant silver-gray rotor coating
- Front axle kit: pads and rotors supplied together
Fitment: Ford F-150 Raptor 2017-2020 (3.5L), plus other 2015-2017 Ford F-150 (2.7L, 3.5L, 5.0L), as listed below. EBC lists these applications with an electric parking brake, and the 5.0L also with a manual parking brake. Fitment confirmed against EBC's published application list.
Guides & Manuals
Installation InstructionsWarranty Information
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor (3.5L) |
| 2015-2017 | Ford | F-150 | 2.7L, 3.5L (electric parking brake) |
| 2015-2017 | Ford | F-150 | 5.0L (electric or manual parking brake) |
This EBC Stage 15 kit pairs EBC Extra Duty pads with USR slotted rotors for the rear brakes of the 2017-2018 Ford F-150 Raptor. It is built for trucks that tow, haul and run big tires, and it arrives as one matched pad-and-rotor set.
Extra Duty pads for hard use. EBC developed the Extra Duty compound for unusually high friction that still behaves well on the street. Braking is strong from the first application, and the race-bred carbon-granule-based material is rated for effective stopping above 1,400 degrees F, well beyond what heavy braking, towing or long downhill descents normally produce. EBC describes it as rotor friendly and quiet.
Fine-slotted USR sport rotors. The rotors are USR fine-slotted G3000 sport rotors finished with a Geomet anti-rust coating, fully balanced and run-out tested for smooth braking. Rear rotor: vented, 6-bolt, 348 mm diameter, 25 mm thick, with manual parking brake; FMSI pad number D1602.
Steady under load. The kit is described as holding a stable friction coefficient under load and frequent snubbing, which suits towing and off-road driving. Expect more dust than a standard pad.
- Kit contents: 1 pair USR7603 Ultimax slotted vented rear rotors and 1 set ED91891 EBC Extra Duty pads
- Stable friction under load and frequent snubbing; suited to towing and off-roading
- Effective above 1,400 degrees F
- Geomet anti-rust coating on the rotors
- Suited to extreme and fleet duty and towing with oversized tires
- Pad outline per EBC drawing: 149 x 54 x 16.5 mm
Fitment: Ford F-150 Raptor 2017-2018 (3.5L, manual parking brake), plus other 2015-2020 F-150 engines (manual parking brake) and 2012-2014 F-150 6-lug trucks as listed below. 2017-2018 Raptors have a manual parking brake and 2019-2020 Raptors an electric one (Ford order guides), so this kit fits 2017-2018 Raptors. Fitment confirmed against EBC's published application list (EBC part finder).
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2018 | Ford | F-150 | Raptor (3.5L, manual parking brake) |
| 2018-2020 | Ford | F-150 | 3.0L, 3.3L (manual parking brake) |
| 2015-2020 | Ford | F-150 | 2.7L, 3.5L, 5.0L (manual parking brake) |
| 2012-2014 | Ford | F-150 | 3.5L, 3.7L, 5.0L (6-lug), 6.2L |
- Choosing a selection results in a full page refresh.
- Opens in a new window.