Welcome to RaptorsOnly.com
-
Brands
Shop by brand
- 3D MAXpider
- Access
- Addictive Desert Designs
- Advan
- AEM Induction
- aFe
- Air Lift
- Airaid
- Alcon
- AlphaRex
- AMP Research
- AMS
- Anderson Composites
- ANZO
- ARB
- Atturo Tire
- AutoMeter
- AVS
- AWE Tuning
- BackRack
- Baer Brakes
- Baja Designs
- BAK
- Banks Power
- BBK
- BBS
- BD Diesel
- Belltech
- Bestop
- BFGoodrich
- BMC
- Body Armor 4x4
- Borla
- Brembo
- Brembo OE
- Bully Dog
- Bushwacker
- Camburg
- Clevite
- COBB
- Cometic Gasket
- COMP Cams
- CORSA Performance
- Covercraft
- CSF
- DBA
- DeatschWerks
- DFC
- Diode Dynamics
- DS18
- DV8 Offroad
- Eaton
- EBC
- Eibach
- Enkei
- Extang
- Fabtech
- Fel-Pro
- fifteen52
- Firestone
- Flowmaster
- Ford Racing
- Forgestar
- FORM Lighting
- FOX
- Garrett
- Gates
- GEN-Y Hitch
- Go Fast Bits
- Go Rhino
- Gram Lights
- Granatelli Motor Sports
- GSC Power Division
- Hawk Performance
- Hella
- Hellwig
- Hotchkis
- Husky Liners
- ICON
- Injen
- J&L
- JBA
- JLT
- K&N Engineering
- KC HiLiTES
- King Engine Bearings
- King Shocks
- Kleinn Air Horns
- Kooks Headers
- KYB
- LIQUI MOLY
- LUND
- Magnaflow
- Mahle OE
- Maxtrac
- Mayhem
- MBRP
- McGard
- Method Wheels
- MGP
- Michelin
- Mickey Thompson
- Mishimoto
- Moog
- Motul
- MTX Wheels
- N-Fab
- Nacho Offroad Technology
- NGK
- Nitrous Express
- Odyssey Battery
- ORACLE Lighting
- PowerStop
- Putco
- QA1
- Raceline
- Radium Engineering
- Rally Armor
- Rampage
- Raxiom
- Retrax
- Rhino-Rack
- Ridetech
- Rigid Industries
- Rival 4x4
- RockJock
- Roll-N-Lock
- Roush
- Royal Purple
- SCT Performance
- Skyjacker
- Snow Performance
- SPC Performance
- SPOD
- Stainless Works
- Superlift
- Superpro
- Timbren
- Torque Solution
- TOYO
- Truxedo
- Tuff Country
- Turbosmart
- UMI Performance
- Undercover
- Volant
- Vossen
- Wagner Tuning
- WeatherTech
- Weld
- Westin
- Whiteline
- Wilwood
- Yokohama Tire
- Yukon Gear & Axle
- Zone Offroad
No brands found. Try another name or initial.
156 brands
View all brands -
F-150 Raptor
- F-150 Raptor
-
1st Gen (2010-2014)
-
2nd Gen (2017-2020)
-
3rd Gen (2021-Present)
-
Raptor R (2023-Present)
-
Bronco Raptor
- Bronco Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
-
Ranger Raptor
- Ranger Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
Your cart
Subheading
Product comparison
Describe you product comparison grid
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
Find wheels and tires that fit your Raptor
Pick your truck and we'll narrow the catalogue to the wheels drilled for your bolt pattern and the tire sizes that fit your rims.
Shopping for
- Bolt pattern
- Hub bore
- Factory tire
149 products
149 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$435.00
$849.00
The Vossen HFX-6 in 22x9.5, 6x139.7 and Satin Black is a Hybrid Forged six-lug wheel for trucks and SUVs. Vossen lists the HFX-6 in its Hybrid Forged 6-lug line with a Deep, Super Deep or Ultra Deep concave profile. This listing is the Deep profile, ET30 part (the -TL variant) with a 95.1 mm center bore, which we list for the 2024-2026 Ford Ranger Raptor.
Hybrid Forged process. Vossen describes it in four steps: a cast wheel is mounted on a flow-forming drum and heated, hydraulic rollers press and stretch the barrel, the metal is stretched and compressed to reach the wheel's width, and stretching the barrel improves the grain structure of the aluminum so the barrel is stronger and lighter, similar to a forged wheel.
Finish. Vossen's HFX-6 gallery shows Satin Black, and the photos here are Vossen's images of the HFX-6 in Satin Black. They may show a different size or profile than this part.
Features
- Size 22x9.5 with a 6x139.7 bolt pattern, offset ET30, Deep profile (per the supplier listing)
- Center bore 95.1 mm (bore per the supplier listing, not stated on Vossen's page)
- Hybrid Forged, flow-formed barrel as described by Vossen
- Vossen also offers a custom sizing and offset program
- Lug nuts are not included; the Ranger Raptor uses M12x1.5 lug threads
Fitment
Vossen publishes the HFX-6 in 22x9.5 at 6x139.7 with +20 and +30 offsets, and Vossen's standard sizing list shows this size, pattern and ET30. Vossen does not name vehicles, so fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: the Ranger Raptor is 6x139.7 with a 93.1 mm hub. This wheel's 95.1 mm bore (per the supplier listing) is larger than the hub, so it mounts with hub-centric rings. It is not listed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which are 6x135.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The Ranger Raptor factory offset is +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$849.00
The Vossen HFX-6 in 22x9.5, 6x139.7 and Satin Black is a Hybrid Forged six-lug wheel for trucks and SUVs. Vossen lists the HFX-6 in its Hybrid Forged 6-lug line with a Deep, Super Deep or Ultra Deep concave profile. This listing is the Deep profile, ET20 part with a 106.1 mm center bore, which we list for the 2024-2026 Ford Ranger Raptor.
Hybrid Forged process. Vossen describes it in four steps: a cast wheel is mounted on a flow-forming drum and heated, hydraulic rollers press and stretch the barrel, the metal is stretched and compressed to reach the wheel's width, and stretching the barrel improves the grain structure of the aluminum so the barrel is stronger and lighter, similar to a forged wheel.
Finish. Vossen's HFX-6 gallery shows Satin Black, and the photos here are Vossen's images of the HFX-6 in Satin Black. They may show a different size or profile than this part.
Features
- Size 22x9.5 with a 6x139.7 bolt pattern, offset ET20, Deep profile (per the supplier listing)
- Center bore 106.1 mm (bore per the supplier listing, not stated on Vossen's page)
- Hybrid Forged, flow-formed barrel as described by Vossen
- Vossen also offers a custom sizing and offset program
- Lug nuts are not included; the Ranger Raptor uses M12x1.5 lug threads
Fitment
Vossen publishes the HFX-6 in 22x9.5 at 6x139.7 with +20 and +30 offsets, and Vossen's standard sizing list shows this size, pattern and ET20. Vossen does not name vehicles, so fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: the Ranger Raptor is 6x139.7 with a 93.1 mm hub. This wheel's 106.1 mm bore (per the supplier listing) is larger than the hub, so it mounts with hub-centric rings. It is not listed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which are 6x135.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The Ranger Raptor factory offset is +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$849.00
The Vossen HFX-6 in 22x9.5, 6x139.7 and Gloss Black is a Hybrid Forged six-lug wheel for trucks and SUVs. Vossen lists the HFX-6 in its Hybrid Forged 6-lug line with a Deep, Super Deep or Ultra Deep concave profile. This listing is the Deep profile, ET30 part (the -TL variant) with a 95.1 mm center bore, which we list for the 2024-2026 Ford Ranger Raptor.
Hybrid Forged process. Vossen describes it in four steps: a cast wheel is mounted on a flow-forming drum and heated, hydraulic rollers press and stretch the barrel, the metal is stretched and compressed to reach the wheel's width, and stretching the barrel improves the grain structure of the aluminum so the barrel is stronger and lighter, similar to a forged wheel.
Finish. Vossen's HFX-6 gallery shows Gloss Black, and the photos here are Vossen's images of the HFX-6 in Gloss Black. They may show a different size or profile than this part.
Features
- Size 22x9.5 with a 6x139.7 bolt pattern, offset ET30, Deep profile (per the supplier listing)
- Center bore 95.1 mm (bore per the supplier listing, not stated on Vossen's page)
- Hybrid Forged, flow-formed barrel as described by Vossen
- Vossen also offers a custom sizing and offset program
- Lug nuts are not included; the Ranger Raptor uses M12x1.5 lug threads
Fitment
Vossen publishes the HFX-6 in 22x9.5 at 6x139.7 with +20 and +30 offsets, and Vossen's standard sizing list shows this size, pattern and ET30. Vossen does not name vehicles, so fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: the Ranger Raptor is 6x139.7 with a 93.1 mm hub. This wheel's 95.1 mm bore (per the supplier listing) is larger than the hub, so it mounts with hub-centric rings. It is not listed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which are 6x135.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The Ranger Raptor factory offset is +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$849.00
The Vossen HFX-6 in 22x9.5, 6x139.7 and Gloss Black is a Hybrid Forged six-lug wheel for trucks and SUVs. Vossen lists the HFX-6 in its Hybrid Forged 6-lug line with a Deep, Super Deep or Ultra Deep concave profile. This listing is the Deep profile, ET20 part with a 106.1 mm center bore, which we list for the 2024-2026 Ford Ranger Raptor.
Hybrid Forged process. Vossen describes it in four steps: a cast wheel is mounted on a flow-forming drum and heated, hydraulic rollers press and stretch the barrel, the metal is stretched and compressed to reach the wheel's width, and stretching the barrel improves the grain structure of the aluminum so the barrel is stronger and lighter, similar to a forged wheel.
Finish. Vossen's HFX-6 gallery shows Gloss Black, and the photos here are Vossen's images of the HFX-6 in Gloss Black. They may show a different size or profile than this part.
Features
- Size 22x9.5 with a 6x139.7 bolt pattern, offset ET20, Deep profile (per the supplier listing)
- Center bore 106.1 mm (bore per the supplier listing, not stated on Vossen's page)
- Hybrid Forged, flow-formed barrel as described by Vossen
- Vossen also offers a custom sizing and offset program
- Lug nuts are not included; the Ranger Raptor uses M12x1.5 lug threads
Fitment
Vossen publishes the HFX-6 in 22x9.5 at 6x139.7 with +20 and +30 offsets, and Vossen's standard sizing list shows this size, pattern and ET20. Vossen does not name vehicles, so fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: the Ranger Raptor is 6x139.7 with a 93.1 mm hub. This wheel's 106.1 mm bore (per the supplier listing) is larger than the hub, so it mounts with hub-centric rings. It is not listed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which are 6x135.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The Ranger Raptor factory offset is +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$849.00
The Vossen HFX-1 in 22x10, 6x139.7 and Gloss Black is a Hybrid Forged six-lug wheel for trucks and SUVs. Vossen says the HFX-1 is derived from its forged LC3-01 wheel, and its robotic custom Hybrid Forged program builds fitments and bolt patterns for 5-lug, 6-lug and 8-lug vehicles. This listing is the Super Deep profile, ET18 part with a 106.1 mm center bore, which we list for the 2024-2026 Ford Ranger Raptor.
Hybrid Forged process. Vossen describes it in four steps: a cast wheel is mounted on a flow-forming drum and heated, hydraulic rollers press and stretch the barrel, the metal is stretched and compressed to reach the wheel's width, and stretching the barrel improves the grain structure of the aluminum so the barrel is stronger and lighter, similar to a forged wheel.
Finish and profile. Gloss Black is one of the standard finishes Vossen lists for the HFX-1, and Vossen offers Deep, Super Deep and Ultra Deep concave profiles. The photos are Vossen's gallery images of the HFX-1 in Gloss Black and may show a different size or profile than this part.
Features
- Size 22x10 with a 6x139.7 bolt pattern, offset ET18, Super Deep profile (per the supplier listing)
- Center bore 106.1 mm (bore per the supplier listing, not stated on Vossen's page)
- Hybrid Forged, flow-formed barrel as described by Vossen
- Vossen also offers a custom sizing and offset program
- Lug nuts are not included; the Ranger Raptor uses M12x1.5 lug threads
Fitment
The supplier lists this wheel as 22x10, 6x139.7 with a +18 offset. Vossen's standard sizing list shows 22x10 in 6x139.7 at -18, not +18, so Vossen does not confirm the +18 offset and this may be a custom size. We keep the supplier's offset in the title and copy. Vossen does not name vehicles, so fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: the Ranger Raptor is 6x139.7 with a 93.1 mm hub. This wheel's 106.1 mm bore (per the supplier listing) is larger than the hub, so it mounts with hub-centric rings. It is not listed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which are 6x135.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The Ranger Raptor factory offset is +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$849.00
The Vossen HFX-1 in 22x9.5, 6x139.7 and Satin Black is a Hybrid Forged six-lug wheel for trucks and SUVs. Vossen says the HFX-1 is derived from its forged LC3-01 wheel, and its robotic custom Hybrid Forged program builds fitments and bolt patterns for 5-lug, 6-lug and 8-lug vehicles. This listing is the Deep profile, ET20 part with a 106.1 mm center bore, which we list for the 2024-2026 Ford Ranger Raptor.
Hybrid Forged process. Vossen describes it in four steps: a cast wheel is mounted on a flow-forming drum and heated, hydraulic rollers press and stretch the barrel, the metal is stretched and compressed to reach the wheel's width, and stretching the barrel improves the grain structure of the aluminum so the barrel is stronger and lighter, similar to a forged wheel.
Finish and profile. Satin Black is one of the standard finishes Vossen lists for the HFX-1, and Vossen offers Deep, Super Deep and Ultra Deep concave profiles. The photos are Vossen's gallery images of the HFX-1 in Satin Black and may show a different size or profile than this part.
Features
- Size 22x9.5 with a 6x139.7 bolt pattern, offset ET20, Deep profile (per the supplier listing)
- Center bore 106.1 mm (bore per the supplier listing, not stated on Vossen's page)
- Hybrid Forged, flow-formed barrel as described by Vossen
- Vossen also offers a custom sizing and offset program
- Lug nuts are not included; the Ranger Raptor uses M12x1.5 lug threads
Fitment
Vossen publishes the HFX-1 in 22x9.5 at 6x139.7 with +20 and +30 offsets, and Vossen's standard sizing list shows this size, pattern and ET20. Vossen does not name vehicles, so fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: the Ranger Raptor is 6x139.7 with a 93.1 mm hub. This wheel's 106.1 mm bore (per the supplier listing) is larger than the hub, so it mounts with hub-centric rings. It is not listed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which are 6x135.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The Ranger Raptor factory offset is +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$849.00
The Vossen HFX-1 in 22x9.5, 6x139.7 and Gloss Black is a Hybrid Forged six-lug wheel for trucks and SUVs. Vossen says the HFX-1 is derived from its forged LC3-01 wheel, and its robotic custom Hybrid Forged program builds fitments and bolt patterns for 5-lug, 6-lug and 8-lug vehicles. This listing is the Deep profile, ET20 part with a 106.1 mm center bore, which we list for the 2024-2026 Ford Ranger Raptor.
Hybrid Forged process. Vossen describes it in four steps: a cast wheel is mounted on a flow-forming drum and heated, hydraulic rollers press and stretch the barrel, the metal is stretched and compressed to reach the wheel's width, and stretching the barrel improves the grain structure of the aluminum so the barrel is stronger and lighter, similar to a forged wheel.
Finish and profile. Gloss Black is one of the standard finishes Vossen lists for the HFX-1, and Vossen offers Deep, Super Deep and Ultra Deep concave profiles. The photos are Vossen's gallery images of the HFX-1 in Gloss Black and may show a different size or profile than this part.
Features
- Size 22x9.5 with a 6x139.7 bolt pattern, offset ET20, Deep profile (per the supplier listing)
- Center bore 106.1 mm (bore per the supplier listing, not stated on Vossen's page)
- Hybrid Forged, flow-formed barrel as described by Vossen
- Vossen also offers a custom sizing and offset program
- Lug nuts are not included; the Ranger Raptor uses M12x1.5 lug threads
Fitment
Vossen publishes the HFX-1 in 22x9.5 at 6x139.7 with +20 and +30 offsets, and Vossen's standard sizing list shows this size, pattern and ET20. Vossen does not name vehicles, so fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: the Ranger Raptor is 6x139.7 with a 93.1 mm hub. This wheel's 106.1 mm bore (per the supplier listing) is larger than the hub, so it mounts with hub-centric rings. It is not listed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which are 6x135.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The Ranger Raptor factory offset is +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$849.00
The Vossen HFX-1 in 22x10, 6x135 and Satin Black is a Hybrid Forged six-lug wheel for trucks and SUVs. Vossen says the HFX-1 is derived from its forged LC3-01 wheel, and its robotic custom Hybrid Forged program builds fitments and bolt patterns for 5-lug, 6-lug and 8-lug vehicles. This listing is the Super Deep profile, ET18 part with an 87.1 mm center bore, which we list for the 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R and 2022-2026 Bronco Raptor.
Hybrid Forged process. Vossen describes it in four steps: a cast wheel is mounted on a flow-forming drum and heated, hydraulic rollers press and stretch the barrel, the metal is stretched and compressed to reach the wheel's width, and stretching the barrel improves the grain structure of the aluminum so the barrel is stronger and lighter, similar to a forged wheel.
Finish and profile. Satin Black is one of the standard finishes Vossen lists for the HFX-1, and Vossen offers Deep, Super Deep and Ultra Deep concave profiles. The photos are Vossen's gallery images of the HFX-1 in Satin Black and may show a different size or profile than this part.
Features
- Size 22x10 with a 6x135 bolt pattern, offset ET18, Super Deep profile (per the supplier listing)
- Center bore 87.1 mm (bore per the supplier listing, not stated on Vossen's page)
- Hybrid Forged, flow-formed barrel as described by Vossen
- Vossen also offers a custom sizing and offset program
- Lug nuts are not included; these Raptors use M14x1.5 lug threads
Fitment
The supplier lists this wheel as 22x10, 6x135 with a +18 offset. Vossen's standard sizing list shows 22x10 in 6x135 at -18, not +18, so Vossen does not confirm the +18 offset and this may be a custom size. We keep the supplier's offset in the title and copy. Vossen does not name vehicles, so fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: the F-150 Raptor, F-150 Raptor R and Bronco Raptor are 6x135 with an 87.1 mm hub, and this wheel's 87.1 mm bore (per the supplier listing) matches it. It is not listed for the Ranger Raptor, which is 6x139.7.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on these Raptors is about +34 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$849.00
The Vossen HFX-1 in 22x10, 6x135 and Gloss Black is a Hybrid Forged six-lug wheel for trucks and SUVs. Vossen says the HFX-1 is derived from its forged LC3-01 wheel, and its robotic custom Hybrid Forged program builds fitments and bolt patterns for 5-lug, 6-lug and 8-lug vehicles. This listing is the Super Deep profile, ET18 part with an 87.1 mm center bore, which we list for the 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R and 2022-2026 Bronco Raptor.
Hybrid Forged process. Vossen describes it in four steps: a cast wheel is mounted on a flow-forming drum and heated, hydraulic rollers press and stretch the barrel, the metal is stretched and compressed to reach the wheel's width, and stretching the barrel improves the grain structure of the aluminum so the barrel is stronger and lighter, similar to a forged wheel.
Finish and profile. Gloss Black is one of the standard finishes Vossen lists for the HFX-1, and Vossen offers Deep, Super Deep and Ultra Deep concave profiles. The photos are Vossen's gallery images of the HFX-1 in Gloss Black and may show a different size or profile than this part.
Features
- Size 22x10 with a 6x135 bolt pattern, offset ET18, Super Deep profile (per the supplier listing)
- Center bore 87.1 mm (bore per the supplier listing, not stated on Vossen's page)
- Hybrid Forged, flow-formed barrel as described by Vossen
- Vossen also offers a custom sizing and offset program
- Lug nuts are not included; these Raptors use M14x1.5 lug threads
Fitment
The supplier lists this wheel as 22x10, 6x135 with a +18 offset. Vossen's standard sizing list shows 22x10 in 6x135 at -18, not +18, so Vossen does not confirm the +18 offset and this may be a custom size. We keep the supplier's offset in the title and copy. Vossen does not name vehicles, so fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: the F-150 Raptor, F-150 Raptor R and Bronco Raptor are 6x135 with an 87.1 mm hub, and this wheel's 87.1 mm bore (per the supplier listing) matches it. It is not listed for the Ranger Raptor, which is 6x139.7.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on these Raptors is about +34 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$849.00
The Vossen HFX-1 in 22x9.5, 6x135 and Satin Black is a Hybrid Forged six-lug wheel for trucks and SUVs. Vossen says the HFX-1 is derived from its forged LC3-01 wheel, and its robotic custom Hybrid Forged program builds fitments and bolt patterns for 5-lug, 6-lug and 8-lug vehicles. This listing is the Deep profile, ET30 part with an 87.1 mm center bore, which we list for the 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R and 2022-2026 Bronco Raptor.
Hybrid Forged process. Vossen describes it in four steps: a cast wheel is mounted on a flow-forming drum and heated, hydraulic rollers press and stretch the barrel, the metal is stretched and compressed to reach the wheel's width, and stretching the barrel improves the grain structure of the aluminum so the barrel is stronger and lighter, similar to a forged wheel.
Finish and profile. Satin Black is one of the standard finishes Vossen lists for the HFX-1, and Vossen offers Deep, Super Deep and Ultra Deep concave profiles. The photos are Vossen's gallery images of the HFX-1 in Satin Black and may show a different size or profile than this part.
Features
- Size 22x9.5 with a 6x135 bolt pattern, offset ET30, Deep profile (per the supplier listing)
- Center bore 87.1 mm (bore per the supplier listing, not stated on Vossen's page)
- Hybrid Forged, flow-formed barrel as described by Vossen
- Vossen also offers a custom sizing and offset program
- Lug nuts are not included; these Raptors use M14x1.5 lug threads
Fitment
The supplier lists this wheel as 22x9.5, 6x135 with a +30 offset (the -30 part variant). Vossen's standard sizing list shows 22x9.5 in 6x135 at +20 only; its +30 offset is listed for 6x139.7, not 6x135. Vossen therefore does not confirm this size, pattern and offset together, and it may be a custom size. We keep the supplier's offset in the title and copy. Vossen does not name vehicles, so fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: the F-150 Raptor, F-150 Raptor R and Bronco Raptor are 6x135 with an 87.1 mm hub, and this wheel's 87.1 mm bore (per the supplier listing) matches it. It is not listed for the Ranger Raptor, which is 6x139.7.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on these Raptors is about +34 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$849.00
The Vossen HFX-1 in 22x9.5, 6x135 and Gloss Black is a Hybrid Forged six-lug wheel for trucks and SUVs. Vossen says the HFX-1 is derived from its forged LC3-01 wheel, and its robotic custom Hybrid Forged program builds fitments and bolt patterns for 5-lug, 6-lug and 8-lug vehicles. This listing is the Deep profile, ET20 part with an 87.1 mm center bore, which we list for the 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R and 2022-2026 Bronco Raptor.
Hybrid Forged process. Vossen describes it in four steps: a cast wheel is mounted on a flow-forming drum and heated, hydraulic rollers press and stretch the barrel, the metal is stretched and compressed to reach the wheel's width, and stretching the barrel improves the grain structure of the aluminum so the barrel is stronger and lighter, similar to a forged wheel.
Finish and profile. Gloss Black is one of the standard finishes Vossen lists for the HFX-1, and Vossen offers Deep, Super Deep and Ultra Deep concave profiles. The photos are Vossen's gallery images of the HFX-1 in Gloss Black and may show a different size or profile than this part.
Features
- Size 22x9.5 with a 6x135 bolt pattern, offset ET20, Deep profile (per the supplier listing)
- Center bore 87.1 mm (bore per the supplier listing, not stated on Vossen's page)
- Hybrid Forged, flow-formed barrel as described by Vossen
- Vossen also offers a custom sizing and offset program
- Lug nuts are not included; these Raptors use M14x1.5 lug threads
Fitment
Vossen publishes the HFX-1 in 22x9.5 at 6x135 +20, and Vossen's standard sizing list shows this size, pattern and offset. Vossen does not name vehicles, so fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: the F-150 Raptor, F-150 Raptor R and Bronco Raptor are 6x135 with an 87.1 mm hub, and this wheel's 87.1 mm bore (per the supplier listing) matches it. It is not listed for the Ranger Raptor, which is 6x139.7.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on these Raptors is about +34 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$749.00
The Vossen HFX-1 in 20x10, 6x135 and Tinted Gloss Black is a Hybrid Forged six-lug wheel for trucks and SUVs. Vossen says the HFX-1 is derived from its forged LC3-01 wheel, and its robotic custom Hybrid Forged program builds fitments and bolt patterns for 5-lug, 6-lug and 8-lug vehicles. This listing is the Super Deep profile, ET18 part with an 87.1 mm center bore, which we list for the 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R and 2022-2026 Bronco Raptor.
Hybrid Forged process. Vossen describes it in four steps: a cast wheel is mounted on a flow-forming drum and heated, hydraulic rollers press and stretch the barrel, the metal is stretched and compressed to reach the wheel's width, and stretching the barrel improves the grain structure of the aluminum so the barrel is stronger and lighter, similar to a forged wheel.
Finish and profile. Tinted Gloss Black is one of the standard finishes Vossen lists for the HFX-1, and Vossen offers Deep, Super Deep and Ultra Deep concave profiles. The photos are Vossen's gallery images of the HFX-1 in Tinted Gloss Black and may show a different size or profile than this part.
Features
- Size 20x10 with a 6x135 bolt pattern, offset ET18, Super Deep profile (per the supplier listing)
- Center bore 87.1 mm (bore per the supplier listing, not stated on Vossen's page)
- Hybrid Forged, flow-formed barrel as described by Vossen
- Vossen also offers a custom sizing and offset program
- Lug nuts are not included; these Raptors use M14x1.5 lug threads
Fitment
The supplier lists this wheel as 20x10, 6x135 with a +18 offset. Vossen's standard sizing list shows 20x10 in 6x135 at -18, not +18, so Vossen does not confirm the +18 offset and this may be a custom size. We keep the supplier's offset in the title and copy. Vossen does not name vehicles, so fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: the F-150 Raptor, F-150 Raptor R and Bronco Raptor are 6x135 with an 87.1 mm hub, and this wheel's 87.1 mm bore (per the supplier listing) matches it. It is not listed for the Ranger Raptor, which is 6x139.7.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on these Raptors is about +34 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$749.00
The Vossen HFX-1 in 20x9.5, 6x135 and Gloss Black is a Hybrid Forged six-lug wheel for trucks and SUVs. Vossen says the HFX-1 is derived from its forged LC3-01 wheel, and its robotic custom Hybrid Forged program builds fitments and bolt patterns for 5-lug, 6-lug and 8-lug vehicles. This listing is the Deep profile, ET15 part with an 87.1 mm center bore, which we list for the 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R and 2022-2026 Bronco Raptor.
Hybrid Forged process. Vossen describes it in four steps: a cast wheel is mounted on a flow-forming drum and heated, hydraulic rollers press and stretch the barrel, the metal is stretched and compressed to reach the wheel's width, and stretching the barrel improves the grain structure of the aluminum so the barrel is stronger and lighter, similar to a forged wheel.
Finish and profile. Gloss Black is one of the standard finishes Vossen lists for the HFX-1, and Vossen offers Deep, Super Deep and Ultra Deep concave profiles. The photos are Vossen's gallery images of the HFX-1 in Gloss Black and may show a different size or profile than this part.
Features
- Size 20x9.5 with a 6x135 bolt pattern, offset ET15, Deep profile (per the supplier listing)
- Center bore 87.1 mm (bore per the supplier listing, not stated on Vossen's page)
- Hybrid Forged, flow-formed barrel as described by Vossen
- Vossen also offers a custom sizing and offset program
- Lug nuts are not included; these Raptors use M14x1.5 lug threads
Fitment
Vossen publishes the HFX-1 in 20x9.5 at 6x135 +15, and Vossen's standard sizing list shows this size, pattern and offset. Vossen does not name vehicles, so fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: the F-150 Raptor, F-150 Raptor R and Bronco Raptor are 6x135 with an 87.1 mm hub, and this wheel's 87.1 mm bore (per the supplier listing) matches it. It is not listed for the Ranger Raptor, which is 6x139.7.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on these Raptors is about +34 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$949.00
The Vossen HF6-5 in 24x10, 6x139.7 and Gloss Black is a Hybrid Forged six-lug wheel made for trucks and SUVs. This listing is the Deep profile, ET25 part with a 106.1 mm center bore, which we list for the 2024-2026 Ford Ranger Raptor.
Hybrid Forged process. Vossen describes it in four steps: a cast wheel is mounted on a flow-forming drum and heated, hydraulic rollers press and stretch the barrel, the metal is stretched and compressed to reach the wheel's width, and stretching the barrel improves the grain structure of the aluminum so the barrel is stronger and lighter, similar to a forged wheel.
Finish. Gloss Black is one of the standard finishes Vossen lists for the HF6-5; Vossen says the wheel comes in 5 standard transparent finishes and 5 custom finishes. The photos are Vossen's gallery images of the HF6-5 in Gloss Black and may show a different size or profile than this part.
Features
- Size 24x10 with a 6x139.7 bolt pattern, offset ET25, Deep profile (per the supplier listing)
- Center bore 106.1 mm (bore per the supplier listing, not stated on Vossen's page)
- Hybrid Forged, flow-formed barrel as described by Vossen
- Vossen also offers a custom sizing and offset program
- Lug nuts are not included; the Ranger Raptor uses M12x1.5 lug threads
Fitment
Vossen publishes the HF6-5 in 24x10 at 6x139.7 with +25 and +35 offsets, and Vossen's standard sizing list shows this size, pattern and ET25. Vossen does not name vehicles, so fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: the Ranger Raptor is 6x139.7 with a 93.1 mm hub. This wheel's 106.1 mm bore (per the supplier listing) is larger than the hub, so it mounts with hub-centric rings. It is not listed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which are 6x135.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The Ranger Raptor factory offset is +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$849.00
The Vossen HF6-5 in 22x9.5, 6x139.7 and Gloss Black is a Hybrid Forged six-lug wheel made for trucks and SUVs. This listing is the Deep profile, ET30 part with a 95.1 mm center bore, which we list for the 2024-2026 Ford Ranger Raptor.
Hybrid Forged process. Vossen describes it in four steps: a cast wheel is mounted on a flow-forming drum and heated, hydraulic rollers press and stretch the barrel, the metal is stretched and compressed to reach the wheel's width, and stretching the barrel improves the grain structure of the aluminum so the barrel is stronger and lighter, similar to a forged wheel.
Finish. Gloss Black is one of the standard finishes Vossen lists for the HF6-5; Vossen says the wheel comes in 5 standard transparent finishes and 5 custom finishes. The photos are Vossen's gallery images of the HF6-5 in Gloss Black and may show a different size or profile than this part.
Features
- Size 22x9.5 with a 6x139.7 bolt pattern, offset ET30, Deep profile (per the supplier listing)
- Center bore 95.1 mm (bore per the supplier listing, not stated on Vossen's page)
- Hybrid Forged, flow-formed barrel as described by Vossen
- Vossen also offers a custom sizing and offset program
- Lug nuts are not included; the Ranger Raptor uses M12x1.5 lug threads
Fitment
Vossen publishes the HF6-5 in 22x9.5 at 6x139.7 with +20 and +30 offsets, and Vossen's standard sizing list shows this size, pattern and ET30. Vossen does not name vehicles, so fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: the Ranger Raptor is 6x139.7 with a 93.1 mm hub. This wheel's 95.1 mm bore (per the supplier listing) is larger than the hub, so it mounts with hub-centric rings. It is not listed for the F-150 Raptor, F-150 Raptor R or Bronco Raptor, which are 6x135.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The Ranger Raptor factory offset is +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$849.00
The Vossen HF6-5 is one of Vossen's Hybrid Forged 6-lug wheel designs, made specifically for trucks and SUVs. This listing is the 22x9.5 in Gloss Black, drilled 6x139.7 with a +20 offset and a Deep concave profile (profile per the supplier listing).
Built by flow forming. Vossen says its flow-forming process stretches and compresses the barrel material to improve the grain structure of the aluminum, giving a stronger, lighter barrel similar to a forged wheel.
Made for a Raptor's 6-lug pattern. The 6x139.7 bolt pattern is the one Ford uses on the Ranger Raptor, and the center bore is 106.1 mm, larger than the Ranger Raptor hub, so hub-centric rings are needed to center it on the hub. Bore per the supplier listing, not stated on Vossen's page.
Finish. Gloss Black is one of the standard finishes Vossen lists for the HF6-5 (Tinted Gloss Black, Satin Black, Gloss Black, Matte Gunmetal and Silver Polished). Vossen also runs a custom sizing and offset program for other bolt patterns, bores and offsets.
Features
- Vossen HF6-5 design, 22x9.5 with a 6x139.7 bolt pattern
- +20 offset and 106.1 mm center bore (bore per the supplier listing)
- Deep concave profile; Vossen offers the HF6-5 in Deep, Super Deep and Ultra Deep profiles across its sizes
- Flow-formed barrel, as described by Vossen
- Gloss Black finish, one of Vossen's standard HF6-5 finishes
Fitment: the supplier lists this wheel as 22x9.5, 6x139.7, +20 offset, 106.1 mm bore (bore per the supplier listing, not stated on Vossen's page). Vossen's page confirms the HF6-5 is offered in Gloss Black. Vossen's standard sizing list for the HF6-5 shows 22x9.5 in 6x139.7 at +20. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs, so it is listed for the 2024-2026 Ranger Raptor only, which uses M12x1.5 lug studs. The wheel is sold without lug nuts.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on the Ranger Raptor is +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$849.00
The Vossen HF6-5 is one of Vossen's Hybrid Forged 6-lug wheel designs, made specifically for trucks and SUVs. This listing is the 22x9.5 in Satin Black, drilled 6x139.7 with a +20 offset and a Deep concave profile (profile per the supplier listing).
Built by flow forming. Vossen says its flow-forming process stretches and compresses the barrel material to improve the grain structure of the aluminum, giving a stronger, lighter barrel similar to a forged wheel.
Made for a Raptor's 6-lug pattern. The 6x139.7 bolt pattern is the one Ford uses on the Ranger Raptor, and the center bore is 106.1 mm, larger than the Ranger Raptor hub, so hub-centric rings are needed to center it on the hub. Bore per the supplier listing, not stated on Vossen's page.
Finish. Satin Black is one of the standard finishes Vossen lists for the HF6-5 (Tinted Gloss Black, Satin Black, Gloss Black, Matte Gunmetal and Silver Polished). Vossen also runs a custom sizing and offset program for other bolt patterns, bores and offsets.
Features
- Vossen HF6-5 design, 22x9.5 with a 6x139.7 bolt pattern
- +20 offset and 106.1 mm center bore (bore per the supplier listing)
- Deep concave profile; Vossen offers the HF6-5 in Deep, Super Deep and Ultra Deep profiles across its sizes
- Flow-formed barrel, as described by Vossen
- Satin Black finish, one of Vossen's standard HF6-5 finishes
Fitment: the supplier lists this wheel as 22x9.5, 6x139.7, +20 offset, 106.1 mm bore (bore per the supplier listing, not stated on Vossen's page). Vossen's page confirms the HF6-5 is offered in Satin Black. Vossen's standard sizing list for the HF6-5 shows 22x9.5 in 6x139.7 at +20. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs, so it is listed for the 2024-2026 Ranger Raptor only, which uses M12x1.5 lug studs. The wheel is sold without lug nuts.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on the Ranger Raptor is +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$849.00
The Vossen HF6-5 is one of Vossen's Hybrid Forged 6-lug wheel designs, made specifically for trucks and SUVs. This listing is the 22x9.5 in Tinted Gloss Black, drilled 6x139.7 with a +20 offset and a Deep concave profile (profile per the supplier listing).
Built by flow forming. Vossen says its flow-forming process stretches and compresses the barrel material to improve the grain structure of the aluminum, giving a stronger, lighter barrel similar to a forged wheel.
Made for a Raptor's 6-lug pattern. The 6x139.7 bolt pattern is the one Ford uses on the Ranger Raptor, and the center bore is 106.1 mm, larger than the Ranger Raptor hub, so hub-centric rings are needed to center it on the hub. Bore per the supplier listing, not stated on Vossen's page.
Finish. Tinted Gloss Black is one of the standard finishes Vossen lists for the HF6-5 (Tinted Gloss Black, Satin Black, Gloss Black, Matte Gunmetal and Silver Polished). Vossen also runs a custom sizing and offset program for other bolt patterns, bores and offsets.
Features
- Vossen HF6-5 design, 22x9.5 with a 6x139.7 bolt pattern
- +20 offset and 106.1 mm center bore (bore per the supplier listing)
- Deep concave profile; Vossen offers the HF6-5 in Deep, Super Deep and Ultra Deep profiles across its sizes
- Flow-formed barrel, as described by Vossen
- Tinted Gloss Black finish, one of Vossen's standard HF6-5 finishes
Fitment: the supplier lists this wheel as 22x9.5, 6x139.7, +20 offset, 106.1 mm bore (bore per the supplier listing, not stated on Vossen's page). Vossen's page confirms the HF6-5 is offered in Tinted Gloss Black. Vossen's standard sizing list for the HF6-5 shows 22x9.5 in 6x139.7 at +20. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs, so it is listed for the 2024-2026 Ranger Raptor only, which uses M12x1.5 lug studs. The wheel is sold without lug nuts.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on the Ranger Raptor is +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$849.00
The Vossen HF6-5 is one of Vossen's Hybrid Forged 6-lug wheel designs, made specifically for trucks and SUVs. This listing is the 22x9.5 in Gloss Black, drilled 6x135 with a +20 offset and a Deep concave profile (profile per the supplier listing).
Built by flow forming. Vossen says its flow-forming process stretches and compresses the barrel material to improve the grain structure of the aluminum, giving a stronger, lighter barrel similar to a forged wheel.
Made for a Raptor's 6-lug pattern. The 6x135 bolt pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor, and the center bore is 87.1 mm, which matches the 87.1 mm Ford hub. Bore per the supplier listing, not stated on Vossen's page.
Finish. Gloss Black is one of the standard finishes Vossen lists for the HF6-5 (Tinted Gloss Black, Satin Black, Gloss Black, Matte Gunmetal and Silver Polished). Vossen also runs a custom sizing and offset program for other bolt patterns, bores and offsets.
Features
- Vossen HF6-5 design, 22x9.5 with a 6x135 bolt pattern
- +20 offset and 87.1 mm center bore (bore per the supplier listing)
- Deep concave profile; Vossen offers the HF6-5 in Deep, Super Deep and Ultra Deep profiles across its sizes
- Flow-formed barrel, as described by Vossen
- Gloss Black finish, one of Vossen's standard HF6-5 finishes
Fitment: the supplier lists this wheel as 22x9.5, 6x135, +20 offset, 87.1 mm bore (bore per the supplier listing, not stated on Vossen's page). Vossen's page confirms the HF6-5 is offered in Gloss Black. Vossen's standard sizing list for the HF6-5 shows 22x9.5 in 6x135 at +20. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs, so it is listed for the 2017-2026 F-150 Raptor, 2023-2026 F-150 Raptor R and 2022-2026 Bronco Raptor, which use M14x1.5 lug studs. The wheel is sold without lug nuts.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on these trucks is about +34 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$849.00
The Vossen HF6-5 is one of Vossen's Hybrid Forged 6-lug wheel designs, made specifically for trucks and SUVs. This listing is the 22x9.5 in Satin Black, drilled 6x135 with a +20 offset and a Deep concave profile (profile per the supplier listing).
Built by flow forming. Vossen says its flow-forming process stretches and compresses the barrel material to improve the grain structure of the aluminum, giving a stronger, lighter barrel similar to a forged wheel.
Made for a Raptor's 6-lug pattern. The 6x135 bolt pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor, and the center bore is 87.1 mm, which matches the 87.1 mm Ford hub. Bore per the supplier listing, not stated on Vossen's page.
Finish. Satin Black is one of the standard finishes Vossen lists for the HF6-5 (Tinted Gloss Black, Satin Black, Gloss Black, Matte Gunmetal and Silver Polished). Vossen also runs a custom sizing and offset program for other bolt patterns, bores and offsets.
Features
- Vossen HF6-5 design, 22x9.5 with a 6x135 bolt pattern
- +20 offset and 87.1 mm center bore (bore per the supplier listing)
- Deep concave profile; Vossen offers the HF6-5 in Deep, Super Deep and Ultra Deep profiles across its sizes
- Flow-formed barrel, as described by Vossen
- Satin Black finish, one of Vossen's standard HF6-5 finishes
Fitment: the supplier lists this wheel as 22x9.5, 6x135, +20 offset, 87.1 mm bore (bore per the supplier listing, not stated on Vossen's page). Vossen's page confirms the HF6-5 is offered in Satin Black. Vossen's standard sizing list for the HF6-5 shows 22x9.5 in 6x135 at +20. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs, so it is listed for the 2017-2026 F-150 Raptor, 2023-2026 F-150 Raptor R and 2022-2026 Bronco Raptor, which use M14x1.5 lug studs. The wheel is sold without lug nuts.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on these trucks is about +34 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$849.00
The Vossen HF6-4 is one of Vossen's Hybrid Forged 6-lug designs, made specifically for the truck and SUV market. This listing is the 22x10 in Satin Black, drilled 6x135 with a +18 offset and a Super Deep concave profile (profile per the supplier listing).
Built by flow forming. Vossen says its flow-forming process stretches and compresses the barrel material to improve the grain structure of the aluminum, giving a stronger, lighter barrel similar to a forged wheel.
Made for a Raptor's 6-lug pattern. The 6x135 bolt pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor, and the center bore is 87.1 mm, which matches the 87.1 mm Ford hub. Bore per the supplier listing, not stated on Vossen's page.
Finish. Satin Black is one of the standard finishes Vossen lists for the HF6-4 (Satin Black, Gloss Black, Tinted Gloss Black, Terra Bronze and Matte Gunmetal). Vossen also runs a custom sizing and offset program for other bolt patterns, bores and offsets.
Features
- Vossen HF6-4 design, 22x10 with a 6x135 bolt pattern
- +18 offset and 87.1 mm center bore (bore per the supplier listing)
- Super Deep concave profile; Vossen offers the HF6-4 in Mid, Deep, Super Deep and Ultra Deep profiles across its sizes
- Flow-formed barrel, as described by Vossen
- Satin Black finish, one of Vossen's standard HF6-4 finishes
Fitment: the supplier lists this wheel as 22x10, 6x135, +18 offset, 87.1 mm bore (bore per the supplier listing, not stated on Vossen's page). Vossen's page confirms the HF6-4 is offered in Satin Black. Vossen's standard sizing list shows the 22x10 at -18, not +18, so this may be a custom size. The offset here follows the supplier listing, and Vossen's page does not confirm it. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs, so it is listed for the 2017-2026 F-150 Raptor, 2023-2026 F-150 Raptor R and 2022-2026 Bronco Raptor, which use M14x1.5 lug studs. The wheel is sold without lug nuts.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on these trucks is about +34 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$849.00
The Vossen HF6-3 is one of Vossen's Hybrid Forged 6-lug wheel designs, made specifically for trucks and SUVs. This listing is the 22x9.5 in Gloss Black, drilled 6x139.7 with a +30 offset and a Deep concave profile (profile per the supplier listing).
Made for a Raptor's 6-lug pattern. The 6x139.7 bolt pattern is the one Ford uses on the Ranger Raptor, and the center bore is 95.1 mm, larger than the Ranger Raptor hub, so hub-centric rings are needed to center it on the hub. Bore per the supplier listing, not stated on Vossen's page.
Finish. Gloss Black is one of the standard finishes Vossen lists for the HF6-3 (Matte Gunmetal, Silver Polished, Satin Black, Gloss Black and Brushed Gloss Black). Vossen also runs a custom sizing and offset program for other bolt patterns, bores and offsets.
Features
- Vossen HF6-3 design, 22x9.5 with a 6x139.7 bolt pattern
- +30 offset and 95.1 mm center bore (bore per the supplier listing)
- Deep concave profile; Vossen offers the HF6-3 in Deep profiles across its sizes
- Gloss Black finish, one of Vossen's standard HF6-3 finishes
Fitment: the supplier lists this wheel as 22x9.5, 6x139.7, +30 offset, 95.1 mm bore (bore per the supplier listing, not stated on Vossen's page). Vossen's page confirms the HF6-3 is offered in Gloss Black. Vossen's standard sizing list for the HF6-3 shows 22x9.5 in 6x139.7 at +20 only, not +30, so this may be a custom size. The offset here follows the supplier listing, and Vossen's page does not confirm it. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs, so it is listed for the 2024-2026 Ranger Raptor only, which uses M12x1.5 lug studs. The wheel is sold without lug nuts.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on the Ranger Raptor is +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$949.00
The Vossen HF6-1 is a Hybrid Forged 6-lug wheel from Vossen's truck and SUV lineup. This listing is the 24x10 in Gloss Black, drilled 6x139.7 with a +25 offset and a Deep concave profile (profile per the supplier listing).
Built by flow forming. Vossen says its flow-forming process stretches and compresses the barrel material to improve the grain structure of the aluminum, giving a stronger, lighter barrel similar to a forged wheel.
Made for a Raptor's 6-lug pattern. The 6x139.7 bolt pattern is the one Ford uses on the Ranger Raptor, and the center bore is 106.1 mm, larger than the Ranger Raptor hub, so hub-centric rings are needed to center it on the hub. Bore per the supplier listing, not stated on Vossen's page.
Finish. Gloss Black is one of the standard finishes Vossen lists for the HF6-1 (Silver Polished, Brushed Matte Black, Tinted Gloss Black, Tinted Matte Gunmetal, Satin Black and Gloss Black). Vossen also runs a custom sizing and offset program for other bolt patterns, bores and offsets.
Features
- Vossen HF6-1 design, 24x10 with a 6x139.7 bolt pattern
- +25 offset and 106.1 mm center bore (bore per the supplier listing)
- Deep concave profile; Vossen offers the HF6-1 in Deep profiles across its sizes
- Flow-formed barrel, as described by Vossen
- Gloss Black finish, one of Vossen's standard HF6-1 finishes
Fitment: the supplier lists this wheel as 24x10, 6x139.7, +25 offset, 106.1 mm bore (bore per the supplier listing, not stated on Vossen's page). Vossen's page confirms the HF6-1 is offered in Gloss Black. Vossen's standard sizing list for the HF6-1 shows 24x10 in 6x139.7 at +25. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs, so it is listed for the 2024-2026 Ranger Raptor only, which uses M12x1.5 lug studs. The wheel is sold without lug nuts.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on the Ranger Raptor is +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$949.00
The Vossen HF6-1 is a Hybrid Forged 6-lug wheel from Vossen's truck and SUV lineup. This listing is the 24x10 in Gloss Black, drilled 6x135 with a +25 offset and a Deep concave profile (profile per the supplier listing).
Built by flow forming. Vossen says its flow-forming process stretches and compresses the barrel material to improve the grain structure of the aluminum, giving a stronger, lighter barrel similar to a forged wheel.
Made for a Raptor's 6-lug pattern. The 6x135 bolt pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor, and the center bore is 87.1 mm, which matches the 87.1 mm Ford hub. Bore per the supplier listing, not stated on Vossen's page.
Finish. Gloss Black is one of the standard finishes Vossen lists for the HF6-1 (Silver Polished, Brushed Matte Black, Tinted Gloss Black, Tinted Matte Gunmetal, Satin Black and Gloss Black). Vossen also runs a custom sizing and offset program for other bolt patterns, bores and offsets.
Features
- Vossen HF6-1 design, 24x10 with a 6x135 bolt pattern
- +25 offset and 87.1 mm center bore (bore per the supplier listing)
- Deep concave profile; Vossen offers the HF6-1 in Deep profiles across its sizes
- Flow-formed barrel, as described by Vossen
- Gloss Black finish, one of Vossen's standard HF6-1 finishes
Fitment: the supplier lists this wheel as 24x10, 6x135, +25 offset, 87.1 mm bore (bore per the supplier listing, not stated on Vossen's page). Vossen's page confirms the HF6-1 is offered in Gloss Black. Vossen's standard sizing list for the HF6-1 shows 24x10 in 6x135 at +25. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs, so it is listed for the 2017-2026 F-150 Raptor, 2023-2026 F-150 Raptor R and 2022-2026 Bronco Raptor, which use M14x1.5 lug studs. The wheel is sold without lug nuts.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on these trucks is about +34 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$849.00
The Vossen HF6-1 is a Hybrid Forged 6-lug wheel from Vossen's truck and SUV lineup. This listing is the 22x9.5 in Gloss Black, drilled 6x139.7 with a +30 offset and a Deep concave profile (profile per the supplier listing).
Built by flow forming. Vossen says its flow-forming process stretches and compresses the barrel material to improve the grain structure of the aluminum, giving a stronger, lighter barrel similar to a forged wheel.
Made for a Raptor's 6-lug pattern. The 6x139.7 bolt pattern is the one Ford uses on the Ranger Raptor, and the center bore is 95.1 mm, larger than the Ranger Raptor hub, so hub-centric rings are needed to center it on the hub. Bore per the supplier listing, not stated on Vossen's page.
Finish. Gloss Black is one of the standard finishes Vossen lists for the HF6-1 (Silver Polished, Brushed Matte Black, Tinted Gloss Black, Tinted Matte Gunmetal, Satin Black and Gloss Black). Vossen also runs a custom sizing and offset program for other bolt patterns, bores and offsets.
Features
- Vossen HF6-1 design, 22x9.5 with a 6x139.7 bolt pattern
- +30 offset and 95.1 mm center bore (bore per the supplier listing)
- Deep concave profile; Vossen offers the HF6-1 in Deep profiles across its sizes
- Flow-formed barrel, as described by Vossen
- Gloss Black finish, one of Vossen's standard HF6-1 finishes
Fitment: the supplier lists this wheel as 22x9.5, 6x139.7, +30 offset, 95.1 mm bore (bore per the supplier listing, not stated on Vossen's page). Vossen's page confirms the HF6-1 is offered in Gloss Black. Vossen's standard sizing list for the HF6-1 shows 22x9.5 in 6x139.7 at +30. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs, so it is listed for the 2024-2026 Ranger Raptor only, which uses M12x1.5 lug studs. The wheel is sold without lug nuts.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on the Ranger Raptor is +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$849.00
The Vossen HF6-5 is one of Vossen's Hybrid Forged 6-lug wheel designs, made specifically for trucks and SUVs. This listing is the 22x10 in Gloss Black, drilled 6x139.7 with a +18 offset and a Super Deep concave profile (profile per the supplier listing).
Built by flow forming. Vossen says its flow-forming process stretches and compresses the barrel material to improve the grain structure of the aluminum, giving a stronger, lighter barrel similar to a forged wheel.
Made for a Raptor's 6-lug pattern. The 6x139.7 bolt pattern is the one Ford uses on the Ranger Raptor, and the center bore is 106.1 mm, larger than the Ranger Raptor hub, so hub-centric rings are needed to center it on the hub. Bore per the supplier listing, not stated on Vossen's page.
Finish. Gloss Black is one of the standard finishes Vossen lists for the HF6-5 (Tinted Gloss Black, Satin Black, Gloss Black, Matte Gunmetal and Silver Polished). Vossen also runs a custom sizing and offset program for other bolt patterns, bores and offsets.
Features
- Vossen HF6-5 design, 22x10 with a 6x139.7 bolt pattern
- +18 offset and 106.1 mm center bore (bore per the supplier listing)
- Super Deep concave profile; Vossen offers the HF6-5 in Deep, Super Deep and Ultra Deep profiles across its sizes
- Flow-formed barrel, as described by Vossen
- Gloss Black finish, one of Vossen's standard HF6-5 finishes
Fitment: the supplier lists this wheel as 22x10, 6x139.7, +18 offset, 106.1 mm bore (bore per the supplier listing, not stated on Vossen's page). Vossen's page confirms the HF6-5 is offered in Gloss Black. Vossen's standard sizing list shows the 22x10 at -18, not +18, so this may be a custom size. The offset here follows the supplier listing, and Vossen's page does not confirm it. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs, so it is listed for the 2024-2026 Ranger Raptor only, which uses M12x1.5 lug studs. The wheel is sold without lug nuts.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on the Ranger Raptor is +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$849.00
The Vossen HF6-4 is one of Vossen's Hybrid Forged 6-lug designs, made specifically for the truck and SUV market. This listing is the 22x9.5 in Satin Black, drilled 6x139.7 with a +30 offset and a Deep concave profile (profile per the supplier listing).
Built by flow forming. Vossen says its flow-forming process stretches and compresses the barrel material to improve the grain structure of the aluminum, giving a stronger, lighter barrel similar to a forged wheel.
Made for a Raptor's 6-lug pattern. The 6x139.7 bolt pattern is the one Ford uses on the Ranger Raptor, and the center bore is 95.1 mm, larger than the Ranger Raptor hub, so hub-centric rings are needed to center it on the hub. Bore per the supplier listing, not stated on Vossen's page.
Finish. Satin Black is one of the standard finishes Vossen lists for the HF6-4 (Satin Black, Gloss Black, Tinted Gloss Black, Terra Bronze and Matte Gunmetal). Vossen also runs a custom sizing and offset program for other bolt patterns, bores and offsets.
Features
- Vossen HF6-4 design, 22x9.5 with a 6x139.7 bolt pattern
- +30 offset and 95.1 mm center bore (bore per the supplier listing)
- Deep concave profile; Vossen offers the HF6-4 in Mid, Deep, Super Deep and Ultra Deep profiles across its sizes
- Flow-formed barrel, as described by Vossen
- Satin Black finish, one of Vossen's standard HF6-4 finishes
Fitment: the supplier lists this wheel as 22x9.5, 6x139.7, +30 offset, 95.1 mm bore (bore per the supplier listing, not stated on Vossen's page). Vossen's page confirms the HF6-4 is offered in Satin Black. Vossen's standard sizing list for the HF6-4 shows 22x9.5 in 6x139.7 at +30. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs, so it is listed for the 2024-2026 Ranger Raptor only, which uses M12x1.5 lug studs. The wheel is sold without lug nuts.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on the Ranger Raptor is +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$849.00
The Vossen HF6-4 is one of Vossen's Hybrid Forged 6-lug designs, made specifically for the truck and SUV market. This listing is the 22x9.5 in Terra Bronze, drilled 6x135 with a +20 offset and a Deep concave profile (profile per the supplier listing).
Built by flow forming. Vossen says its flow-forming process stretches and compresses the barrel material to improve the grain structure of the aluminum, giving a stronger, lighter barrel similar to a forged wheel.
Made for a Raptor's 6-lug pattern. The 6x135 bolt pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor, and the center bore is 87.1 mm, which matches the 87.1 mm Ford hub. Bore per the supplier listing, not stated on Vossen's page.
Finish. Terra Bronze is one of the standard finishes Vossen lists for the HF6-4 (Satin Black, Gloss Black, Tinted Gloss Black, Terra Bronze and Matte Gunmetal). Vossen also runs a custom sizing and offset program for other bolt patterns, bores and offsets.
Features
- Vossen HF6-4 design, 22x9.5 with a 6x135 bolt pattern
- +20 offset and 87.1 mm center bore (bore per the supplier listing)
- Deep concave profile; Vossen offers the HF6-4 in Mid, Deep, Super Deep and Ultra Deep profiles across its sizes
- Flow-formed barrel, as described by Vossen
- Terra Bronze finish, one of Vossen's standard HF6-4 finishes
Fitment: the supplier lists this wheel as 22x9.5, 6x135, +20 offset, 87.1 mm bore (bore per the supplier listing, not stated on Vossen's page). Vossen's page confirms the HF6-4 is offered in Terra Bronze. Vossen's standard sizing list for the HF6-4 shows 22x9.5 in 6x135 at +20. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs, so it is listed for the 2017-2026 F-150 Raptor, 2023-2026 F-150 Raptor R and 2022-2026 Bronco Raptor, which use M14x1.5 lug studs. The wheel is sold without lug nuts.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on these trucks is about +34 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$575.00
Vossen lists the HFX-6 as a Hybrid Forged (6-Lug) design. This listing is the 18x9 in Silver Polished, drilled 6x139.7 with a +0 offset and a Super Deep concave profile (profile per the supplier listing).
Made for a Raptor's 6-lug pattern. The 6x139.7 bolt pattern is the one Ford uses on the Ranger Raptor, and the center bore is 106.1 mm, larger than the Ranger Raptor hub, so hub-centric rings are needed to center it on the hub. Bore per the supplier listing, not stated on Vossen's page.
Finish. Silver Polished is one of the standard finishes Vossen lists for the HFX-6 (Hyper Gunmetal, Gloss Black, Satin Black, Terra Bronze and Silver Polished). Vossen also runs a custom sizing and offset program for other bolt patterns, bores and offsets.
Features
- Vossen HFX-6 design, 18x9 with a 6x139.7 bolt pattern
- +0 offset and 106.1 mm center bore (bore per the supplier listing)
- Super Deep concave profile; Vossen offers the HFX-6 in Deep, Super Deep and Ultra Deep profiles across its sizes
- Silver Polished finish, one of Vossen's standard HFX-6 finishes
Fitment: the supplier lists this wheel as 18x9, 6x139.7, +0 offset, 106.1 mm bore (bore per the supplier listing, not stated on Vossen's page). Vossen's page confirms the HFX-6 is offered in Silver Polished. Vossen's standard sizing list for the HFX-6 shows 18x9 in 6x139.7 at +0. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs, so it is listed for the 2024-2026 Ranger Raptor only, which uses M12x1.5 lug studs. The wheel is sold without lug nuts.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on the Ranger Raptor is +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$575.00
Vossen lists the HFX-6 as a Hybrid Forged (6-Lug) design. This listing is the 18x9 in Gloss Black, drilled 6x139.7 with a +0 offset and a Super Deep concave profile (profile per the supplier listing).
Made for a Raptor's 6-lug pattern. The 6x139.7 bolt pattern is the one Ford uses on the Ranger Raptor, and the center bore is 106.1 mm, larger than the Ranger Raptor hub, so hub-centric rings are needed to center it on the hub. Bore per the supplier listing, not stated on Vossen's page.
Finish. Gloss Black is one of the standard finishes Vossen lists for the HFX-6 (Hyper Gunmetal, Gloss Black, Satin Black, Terra Bronze and Silver Polished). Vossen also runs a custom sizing and offset program for other bolt patterns, bores and offsets.
Features
- Vossen HFX-6 design, 18x9 with a 6x139.7 bolt pattern
- +0 offset and 106.1 mm center bore (bore per the supplier listing)
- Super Deep concave profile; Vossen offers the HFX-6 in Deep, Super Deep and Ultra Deep profiles across its sizes
- Gloss Black finish, one of Vossen's standard HFX-6 finishes
Fitment: the supplier lists this wheel as 18x9, 6x139.7, +0 offset, 106.1 mm bore (bore per the supplier listing, not stated on Vossen's page). Vossen's page confirms the HFX-6 is offered in Gloss Black. Vossen's standard sizing list for the HFX-6 shows 18x9 in 6x139.7 at +0. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs, so it is listed for the 2024-2026 Ranger Raptor only, which uses M12x1.5 lug studs. The wheel is sold without lug nuts.
This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on the Ranger Raptor is +55 mm.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$949.00
The Vossen HFX-6 is a Hybrid Forged wheel from Vossen's HFX Series, built for trucks and SUVs. This Gloss Black version is listed as a 24x10 wheel in a 6x139.7 bolt pattern with a +3 mm offset and a 106.1 mm center bore. We list it for the 2024-2026 Ford Ranger Raptor, which uses the 6x139.7 pattern.
Hybrid Forged construction. Vossen describes the HFX-6 as a Hybrid Forged wheel. A cast wheel is flow formed: it is heated on a drum while hydraulic rollers stretch and compress the barrel. Vossen says this improves the grain structure of the aluminum, giving a stronger, lighter barrel similar to a forged wheel.
Finish and profile. Gloss Black is one of five standard finishes Vossen lists for the HFX-6 (Hyper Gunmetal, Gloss Black, Satin Black, Terra Bronze and Silver Polished). The supplier lists this wheel with a Deep concave profile.
Offset and fender clearance. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor wheel is about +55 mm, and this one is +3 mm.
Center bore and lugs. The center bore is 106.1 mm per the supplier listing, not stated on Vossen's page. The Ranger Raptor hub is 93.1 mm, so hub-centric rings are needed to center this wheel on the hub. The Ranger Raptor uses M12x1.5 lug thread; lug nuts are not part of this listing.
Features
- Hybrid Forged flow-formed barrel, per Vossen
- Six-lug design in a 6x139.7 bolt pattern
- 24x10 size, +3 mm offset, 106.1 mm center bore (per the supplier listing)
- Gloss Black, a standard Vossen finish for the HFX-6
Fitment: The supplier publishes this wheel as 24x10, 6x139.7, ET3, 106.1 bore. Vossen's standard sizing list for the 6-lug HFX-6 shows 24x10 in 6x139.7 at +25 only, so Vossen's standard sizing list does not show this size, pattern and offset; it may be a custom size, and Vossen's page does not confirm it. Vossen names no vehicles and lists no bore, so fitment here is decided by bolt pattern and center bore against Ford's Raptor hub specs.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$949.00
The Vossen HFX-6 is a Hybrid Forged wheel from Vossen's HFX Series, built for trucks and SUVs. This Gloss Black version is listed as a 24x10 wheel in a 6x139.7 bolt pattern with a +25 mm offset and a 106.1 mm center bore. We list it for the 2024-2026 Ford Ranger Raptor, which uses the 6x139.7 pattern.
Hybrid Forged construction. Vossen describes the HFX-6 as a Hybrid Forged wheel. A cast wheel is flow formed: it is heated on a drum while hydraulic rollers stretch and compress the barrel. Vossen says this improves the grain structure of the aluminum, giving a stronger, lighter barrel similar to a forged wheel.
Finish and profile. Gloss Black is one of five standard finishes Vossen lists for the HFX-6 (Hyper Gunmetal, Gloss Black, Satin Black, Terra Bronze and Silver Polished). The supplier lists this wheel with a Deep concave profile.
Offset and fender clearance. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor wheel is about +55 mm, and this one is +25 mm.
Center bore and lugs. The center bore is 106.1 mm per the supplier listing, not stated on Vossen's page. The Ranger Raptor hub is 93.1 mm, so hub-centric rings are needed to center this wheel on the hub. The Ranger Raptor uses M12x1.5 lug thread; lug nuts are not part of this listing.
Features
- Hybrid Forged flow-formed barrel, per Vossen
- Six-lug design in a 6x139.7 bolt pattern
- 24x10 size, +25 mm offset, 106.1 mm center bore (per the supplier listing)
- Gloss Black, a standard Vossen finish for the HFX-6
Fitment: Vossen's standard sizing list for the 6-lug HFX-6 shows 24x10 in 6x139.7 at +25, which matches the supplier's listing of 24x10, 6x139.7, ET25, 106.1 bore. Vossen does not list a bore on its page and names no vehicles, so fitment here is decided by bolt pattern and center bore against Ford's Raptor hub specs.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$849.00
The Vossen HFX-6 is a Hybrid Forged wheel from Vossen's HFX Series, built for trucks and SUVs. This Gloss Black version is listed as a 22x10 wheel in a 6x139.7 bolt pattern with a +18 mm offset and a 106.1 mm center bore. We list it for the 2024-2026 Ford Ranger Raptor, which uses the 6x139.7 pattern.
Hybrid Forged construction. Vossen describes the HFX-6 as a Hybrid Forged wheel. A cast wheel is flow formed: it is heated on a drum while hydraulic rollers stretch and compress the barrel. Vossen says this improves the grain structure of the aluminum, giving a stronger, lighter barrel similar to a forged wheel.
Finish and profile. Gloss Black is one of five standard finishes Vossen lists for the HFX-6 (Hyper Gunmetal, Gloss Black, Satin Black, Terra Bronze and Silver Polished). The supplier lists this wheel with a Super Deep concave profile.
Offset and fender clearance. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor wheel is about +55 mm, and this one is +18 mm.
Center bore and lugs. The center bore is 106.1 mm per the supplier listing, not stated on Vossen's page. The Ranger Raptor hub is 93.1 mm, so hub-centric rings are needed to center this wheel on the hub. The Ranger Raptor uses M12x1.5 lug thread; lug nuts are not part of this listing.
Features
- Hybrid Forged flow-formed barrel, per Vossen
- Six-lug design in a 6x139.7 bolt pattern
- 22x10 size, +18 mm offset, 106.1 mm center bore (per the supplier listing)
- Gloss Black, a standard Vossen finish for the HFX-6
Fitment: The supplier publishes this wheel as 22x10, 6x139.7, ET18, 106.1 bore. Vossen's standard sizing list for the 6-lug HFX-6 shows 22x10 in 6x139.7 at -18, not +18. We keep the supplier's +18 offset here; Vossen's page does not confirm it, and this may be a custom size. Vossen names no vehicles and lists no bore, so fitment here is decided by bolt pattern and center bore against Ford's Raptor hub specs.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$849.00
The Vossen HFX-6 is a Hybrid Forged wheel from Vossen's HFX Series, built for trucks and SUVs. This Gloss Black version is listed as a 22x10 wheel in a 6x135 bolt pattern with a +18 mm offset and an 87.1 mm center bore. We list it for the 2017-2026 Ford F-150 Raptor, the 2023-2026 F-150 Raptor R and the 2022-2026 Bronco Raptor, which all use the 6x135 pattern.
Hybrid Forged construction. Vossen describes the HFX-6 as a Hybrid Forged wheel. A cast wheel is flow formed: it is heated on a drum while hydraulic rollers stretch and compress the barrel. Vossen says this improves the grain structure of the aluminum, giving a stronger, lighter barrel similar to a forged wheel.
Finish and profile. Gloss Black is one of five standard finishes Vossen lists for the HFX-6 (Hyper Gunmetal, Gloss Black, Satin Black, Terra Bronze and Silver Polished). The supplier lists this wheel with a Super Deep concave profile.
Offset and fender clearance. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory F-150 Raptor, Raptor R and Bronco Raptor wheel is about +34 mm, and this one is +18 mm.
Center bore and lugs. The center bore is 87.1 mm per the supplier listing, not stated on Vossen's page. It matches the 87.1 mm Ford hub size. These trucks use M14x1.5 lug thread; lug nuts are not part of this listing.
Features
- Hybrid Forged flow-formed barrel, per Vossen
- Six-lug design in a 6x135 bolt pattern
- 22x10 size, +18 mm offset, 87.1 mm center bore (per the supplier listing)
- Gloss Black, a standard Vossen finish for the HFX-6
Fitment: The supplier publishes this wheel as 22x10, 6x135, ET18, 87.1 bore. Vossen's standard sizing list for the 6-lug HFX-6 shows 22x10 in 6x135 at -18, not +18. We keep the supplier's +18 offset here; Vossen's page does not confirm it, and this may be a custom size. Vossen names no vehicles and lists no bore, so fitment here is decided by bolt pattern and center bore against Ford's Raptor hub specs.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$849.00
The Vossen HFX-6 is a Hybrid Forged wheel from Vossen's HFX Series, built for trucks and SUVs. This Gloss Black version is listed as a 22x9.5 wheel in a 6x135 bolt pattern with a +30 mm offset and an 87.1 mm center bore. We list it for the 2017-2026 Ford F-150 Raptor, the 2023-2026 F-150 Raptor R and the 2022-2026 Bronco Raptor, which all use the 6x135 pattern.
Hybrid Forged construction. Vossen describes the HFX-6 as a Hybrid Forged wheel. A cast wheel is flow formed: it is heated on a drum while hydraulic rollers stretch and compress the barrel. Vossen says this improves the grain structure of the aluminum, giving a stronger, lighter barrel similar to a forged wheel.
Finish and profile. Gloss Black is one of five standard finishes Vossen lists for the HFX-6 (Hyper Gunmetal, Gloss Black, Satin Black, Terra Bronze and Silver Polished). The supplier lists this wheel with a Deep concave profile.
Offset and fender clearance. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory F-150 Raptor, Raptor R and Bronco Raptor wheel is about +34 mm, and this one is +30 mm.
Center bore and lugs. The center bore is 87.1 mm per the supplier listing, not stated on Vossen's page. It matches the 87.1 mm Ford hub size. These trucks use M14x1.5 lug thread; lug nuts are not part of this listing.
Features
- Hybrid Forged flow-formed barrel, per Vossen
- Six-lug design in a 6x135 bolt pattern
- 22x9.5 size, +30 mm offset, 87.1 mm center bore (per the supplier listing)
- Gloss Black, a standard Vossen finish for the HFX-6
Fitment: The supplier publishes this wheel as 22x9.5, 6x135, ET30, 87.1 bore. Vossen's standard sizing list for the 6-lug HFX-6 shows 22x9.5 at +20 in 6x135 (its +30 entry is for 6x139.7), so Vossen's standard sizing list does not show this size, pattern and offset; it may be a custom size, and Vossen's page does not confirm it. Vossen names no vehicles and lists no bore, so fitment here is decided by bolt pattern and center bore against Ford's Raptor hub specs.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$849.00
The Vossen HFX-6 is a Hybrid Forged wheel from Vossen's HFX Series, built for trucks and SUVs. This Gloss Black version is listed as a 22x9.5 wheel in a 6x135 bolt pattern with a +20 mm offset and an 87.1 mm center bore. We list it for the 2017-2026 Ford F-150 Raptor, the 2023-2026 F-150 Raptor R and the 2022-2026 Bronco Raptor, which all use the 6x135 pattern.
Hybrid Forged construction. Vossen describes the HFX-6 as a Hybrid Forged wheel. A cast wheel is flow formed: it is heated on a drum while hydraulic rollers stretch and compress the barrel. Vossen says this improves the grain structure of the aluminum, giving a stronger, lighter barrel similar to a forged wheel.
Finish and profile. Gloss Black is one of five standard finishes Vossen lists for the HFX-6 (Hyper Gunmetal, Gloss Black, Satin Black, Terra Bronze and Silver Polished). The supplier lists this wheel with a Deep concave profile.
Offset and fender clearance. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory F-150 Raptor, Raptor R and Bronco Raptor wheel is about +34 mm, and this one is +20 mm.
Center bore and lugs. The center bore is 87.1 mm per the supplier listing, not stated on Vossen's page. It matches the 87.1 mm Ford hub size. These trucks use M14x1.5 lug thread; lug nuts are not part of this listing.
Features
- Hybrid Forged flow-formed barrel, per Vossen
- Six-lug design in a 6x135 bolt pattern
- 22x9.5 size, +20 mm offset, 87.1 mm center bore (per the supplier listing)
- Gloss Black, a standard Vossen finish for the HFX-6
Fitment: Vossen's standard sizing list for the 6-lug HFX-6 shows 22x9.5 in 6x135 at +20, which matches the supplier's listing of 22x9.5, 6x135, ET20, 87.1 bore. Vossen does not list a bore on its page and names no vehicles, so fitment here is decided by bolt pattern and center bore against Ford's Raptor hub specs.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$749.00
The Vossen HFX-6 is a Hybrid Forged wheel from Vossen's HFX Series, built for trucks and SUVs. This Gloss Black version is listed as a 20x10 wheel in a 6x135 bolt pattern with a +18 mm offset and an 87.1 mm center bore. We list it for the 2017-2026 Ford F-150 Raptor, the 2023-2026 F-150 Raptor R and the 2022-2026 Bronco Raptor, which all use the 6x135 pattern.
Hybrid Forged construction. Vossen describes the HFX-6 as a Hybrid Forged wheel. A cast wheel is flow formed: it is heated on a drum while hydraulic rollers stretch and compress the barrel. Vossen says this improves the grain structure of the aluminum, giving a stronger, lighter barrel similar to a forged wheel.
Finish and profile. Gloss Black is one of five standard finishes Vossen lists for the HFX-6 (Hyper Gunmetal, Gloss Black, Satin Black, Terra Bronze and Silver Polished). The supplier lists this wheel with a Super Deep concave profile.
Offset and fender clearance. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory F-150 Raptor, Raptor R and Bronco Raptor wheel is about +34 mm, and this one is +18 mm.
Center bore and lugs. The center bore is 87.1 mm per the supplier listing, not stated on Vossen's page. It matches the 87.1 mm Ford hub size. These trucks use M14x1.5 lug thread; lug nuts are not part of this listing.
Features
- Hybrid Forged flow-formed barrel, per Vossen
- Six-lug design in a 6x135 bolt pattern
- 20x10 size, +18 mm offset, 87.1 mm center bore (per the supplier listing)
- Gloss Black, a standard Vossen finish for the HFX-6
Fitment: The supplier publishes this wheel as 20x10, 6x135, ET18, 87.1 bore. Vossen's standard sizing list for the 6-lug HFX-6 shows 20x10 in 6x135 at -18, not +18. We keep the supplier's +18 offset here; Vossen's page does not confirm it, and this may be a custom size. Vossen names no vehicles and lists no bore, so fitment here is decided by bolt pattern and center bore against Ford's Raptor hub specs.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$749.00
The Vossen HFX-6 is a Hybrid Forged wheel from Vossen's HFX Series, built for trucks and SUVs. This Gloss Black version is listed as a 20x9.5 wheel in a 6x135 bolt pattern with a +15 mm offset and an 87.1 mm center bore. We list it for the 2017-2026 Ford F-150 Raptor, the 2023-2026 F-150 Raptor R and the 2022-2026 Bronco Raptor, which all use the 6x135 pattern.
Hybrid Forged construction. Vossen describes the HFX-6 as a Hybrid Forged wheel. A cast wheel is flow formed: it is heated on a drum while hydraulic rollers stretch and compress the barrel. Vossen says this improves the grain structure of the aluminum, giving a stronger, lighter barrel similar to a forged wheel.
Finish and profile. Gloss Black is one of five standard finishes Vossen lists for the HFX-6 (Hyper Gunmetal, Gloss Black, Satin Black, Terra Bronze and Silver Polished). The supplier lists this wheel with a Deep concave profile.
Offset and fender clearance. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory F-150 Raptor, Raptor R and Bronco Raptor wheel is about +34 mm, and this one is +15 mm.
Center bore and lugs. The center bore is 87.1 mm per the supplier listing, not stated on Vossen's page. It matches the 87.1 mm Ford hub size. These trucks use M14x1.5 lug thread; lug nuts are not part of this listing.
Features
- Hybrid Forged flow-formed barrel, per Vossen
- Six-lug design in a 6x135 bolt pattern
- 20x9.5 size, +15 mm offset, 87.1 mm center bore (per the supplier listing)
- Gloss Black, a standard Vossen finish for the HFX-6
Fitment: Vossen's standard sizing list for the 6-lug HFX-6 shows 20x9.5 in 6x135 at +15, which matches the supplier's listing of 20x9.5, 6x135, ET15, 87.1 bore. Vossen does not list a bore on its page and names no vehicles, so fitment here is decided by bolt pattern and center bore against Ford's Raptor hub specs.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
| 2022-2026 | Ford | Bronco | Raptor |
$849.00
The Vossen HFX-5 is a Hybrid Forged six-lug wheel from Vossen's HFX Series, aimed at trucks and SUVs. This Silver Polished version is listed as a 22x9.5 wheel in a 6x139.7 bolt pattern with a +20 mm offset and a 106.1 mm center bore. We list it for the 2024-2026 Ford Ranger Raptor, which uses the 6x139.7 pattern.
Hybrid Forged construction. Vossen describes the HFX-5 as a Hybrid Forged wheel derived from its forged LC3-04 and LCX-01 designs. A cast wheel is flow formed: it is heated on a drum while hydraulic rollers stretch and compress the barrel. Vossen says this improves the grain structure of the aluminum, giving a stronger, lighter barrel similar to a forged wheel.
Finish and profile. Silver Polished is one of five standard finishes Vossen lists for the HFX-5 (Gloss Gunmetal, Satin Black, Satin Bronze, Gloss Black and Silver Polished). The supplier lists this wheel with a Deep concave profile.
Offset and fender clearance. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory Ranger Raptor wheel is about +55 mm, and this one is +20 mm.
Center bore and lugs. The center bore is 106.1 mm per the supplier listing, not stated on Vossen's page. The Ranger Raptor hub is 93.1 mm, so hub-centric rings are needed to center this wheel on the hub. The Ranger Raptor uses M12x1.5 lug thread; lug nuts are not part of this listing.
Features
- Hybrid Forged flow-formed barrel, per Vossen
- Six-lug design in a 6x139.7 bolt pattern
- 22x9.5 size, +20 mm offset, 106.1 mm center bore (per the supplier listing)
- Silver Polished, a standard Vossen finish for the HFX-5
Fitment: The supplier publishes this wheel as 22x9.5, 6x139.7, ET20, 106.1 bore. Vossen's standard sizing list for the 6-lug HFX-5 shows only 8-lug sizes (22x10, 22x12 and 24x12), so Vossen's standard sizing list does not show this size, pattern and offset; it may be a custom size, and Vossen's page does not confirm it. Vossen also offers a Custom Tailored Program that can CNC a wheel to another bolt pattern, center bore and offset. Fitment here is decided by bolt pattern and center bore against Ford's Raptor hub specs, not by a Vossen vehicle list.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.