Welcome to RaptorsOnly.com
-
Brands
Shop by brand
- 3D MAXpider
- Access
- Addictive Desert Designs
- Advan
- AEM Induction
- aFe
- Air Lift
- Airaid
- Alcon
- AlphaRex
- AMP Research
- AMS
- Anderson Composites
- ANZO
- ARB
- Atturo Tire
- AutoMeter
- AVS
- AWE Tuning
- BackRack
- Baer Brakes
- Baja Designs
- BAK
- Banks Power
- BBK
- BBS
- BD Diesel
- Belltech
- Bestop
- BFGoodrich
- BMC
- Body Armor 4x4
- Borla
- Brembo
- Brembo OE
- Bully Dog
- Bushwacker
- Camburg
- Clevite
- COBB
- Cometic Gasket
- COMP Cams
- CORSA Performance
- Covercraft
- CSF
- DBA
- DeatschWerks
- DFC
- Diode Dynamics
- DS18
- DV8 Offroad
- Eaton
- EBC
- Eibach
- Enkei
- Extang
- Fabtech
- Fel-Pro
- fifteen52
- Firestone
- Flowmaster
- Ford Racing
- Forgestar
- FORM Lighting
- FOX
- Garrett
- Gates
- GEN-Y Hitch
- Go Fast Bits
- Go Rhino
- Gram Lights
- Granatelli Motor Sports
- GSC Power Division
- Hawk Performance
- Hella
- Hellwig
- Hotchkis
- Husky Liners
- ICON
- Injen
- J&L
- JBA
- JLT
- K&N Engineering
- KC HiLiTES
- King Engine Bearings
- King Shocks
- Kleinn Air Horns
- Kooks Headers
- KYB
- LIQUI MOLY
- LUND
- Magnaflow
- Mahle OE
- Maxtrac
- Mayhem
- MBRP
- McGard
- Method Wheels
- MGP
- Michelin
- Mickey Thompson
- Mishimoto
- Moog
- Motul
- MTX Wheels
- N-Fab
- Nacho Offroad Technology
- NGK
- Nitrous Express
- Odyssey Battery
- ORACLE Lighting
- PowerStop
- Putco
- QA1
- Raceline
- Radium Engineering
- Rally Armor
- Rampage
- Raxiom
- Retrax
- Rhino-Rack
- Ridetech
- Rigid Industries
- Rival 4x4
- RockJock
- Roll-N-Lock
- Roush
- Royal Purple
- SCT Performance
- Skyjacker
- Snow Performance
- SPC Performance
- SPOD
- Stainless Works
- Superlift
- Superpro
- Timbren
- Torque Solution
- TOYO
- Truxedo
- Tuff Country
- Turbosmart
- UMI Performance
- Undercover
- Volant
- Vossen
- Wagner Tuning
- WeatherTech
- Weld
- Westin
- Whiteline
- Wilwood
- Yokohama Tire
- Yukon Gear & Axle
- Zone Offroad
No brands found. Try another name or initial.
156 brands
View all brands -
F-150 Raptor
- F-150 Raptor
-
1st Gen (2010-2014)
-
2nd Gen (2017-2020)
-
3rd Gen (2021-Present)
-
Raptor R (2023-Present)
-
Bronco Raptor
- Bronco Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
-
Ranger Raptor
- Ranger Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
Your cart
Subheading
Product comparison
Describe you product comparison grid
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
5 products
5 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
These aFe POWER turbo inlet pipes replace the factory inlet tubes between the air intake and the turbochargers on the 2017-2020 Ford F-150 Raptor with the 3.5L EcoBoost V6. They remove a flow restriction in the factory plumbing, and they work with any aFe intake system or with the stock airbox.
More airflow to the turbos. aFe measured 365 CFM at 7 in. of water through the inlet pipes alone, about 16% more than the factory inlets (315 CFM). On the dyno they added +13 HP and +13 lb-ft of torque.
Computer-designed tubes. The tubes were designed on CAD software for fit and a smooth airflow path. They are made from cross-linked polyethylene (XLPE) that resists heat and impact, with stainless-steel rings pressed into the ends so the tubes do not collapse under pressure or heat.
Reinforced silicone couplings. The black silicone couplings are reinforced with three layers of polyester for heat resistance and wear protection, and they mate directly to the turbos. Stainless-steel clamps are included for a lasting seal.
Tested on the street and off-road. aFe built and tested several 3D-printed prototypes on its in-house dyno and in road testing before release. The kit arrives with all fittings pre-installed on the tubes, factory connections are kept, and aFe estimates about 2 hours for an experienced technician because the turbos are hard to reach.
Features
- Durable XLPE polymer construction, heat and impact resistant
- Black silicone reinforced couplings connect to the factory turbos
- Works with all aFe POWER air intakes and the factory air intake
- Improves airflow to the turbos: 365 CFM versus 315 CFM stock (inlets only)
- Direct fit, no modifications required
Emissions
aFe states this product is not currently CARB exempt. It is not available for purchase in California or for use on any vehicle registered with the California DMV.
Fitment: aFe lists these turbo inlet pipes for the 2017-2020 Ford F-150 Raptor with the 3.5L V6 twin-turbo EcoBoost, plus the 2017-2020 F-150 3.5L EcoBoost and the 2018-2021 Expedition and Navigator with the same engine. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
| 2017-2020 | Ford | F-150 | 3.5L V6 EcoBoost |
| 2018-2021 | Ford | Expedition | 3.5L V6 EcoBoost |
| 2018-2021 | Lincoln | Navigator | 3.5L V6 EcoBoost |
These aFe POWER turbo inlet pipes replace the factory turbo inlets on the 2021-2025 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6. They remove the flow restriction of the factory tubes and give a smoother path for air from the intake to the turbos. aFe's flow chart shows 325 CFM against 295 CFM for stock, about 10% more.
Fits aFe intakes and the factory intake. aFe says the pipes fit all of its aFe POWER air intake systems as well as the factory air intake, so they can be added to a stock truck or to an intake upgrade.
Computer-designed tubes. The inlet tubes are designed in CAD for fit and flow and made of heat- and impact-resistant cross-linked polyethylene (XLPE). A stainless-steel ring is pressed into the driver's side tube end so it cannot collapse under pressure and heat.
Silicone couplings and clamps. Compression-molded silicone couplings have integrated external ribs that hold their shape under vacuum and smooth inner surfaces that keep air moving fast. Stainless-steel Smart Seal clamps are included.
Tested on the dyno and the road. aFe built multiple 3D-printed prototypes and tested each on its dyno and on the street and off-road.
Install. The fittings come pre-installed on the tubes and all factory connections are kept. aFe estimates about 2 hours for an experienced technician because the turbos are hard to reach.
Features
- About 10% more flow than the stock turbo inlets (325 vs 295 CFM)
- Heat- and impact-resistant XLPE tubes with a stainless-steel ring on the driver's side
- Reinforced silicone couplings and stainless-steel Smart Seal clamps
- Fits all aFe POWER intakes and the factory intake
- Direct-fit install, no modifications
Emissions: aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the 2021-2025 Ford F-150 Raptor with the V6-3.5L (tt) EcoBoost, and also the 2021-2025 F-150 3.5L EcoBoost, the 2022-2026 Expedition and the 2022-2025 Lincoln Navigator with the same engine. aFe says the pipes will not fit an F-150 with the 3.5L PowerBoost hybrid. The 5.2L supercharged Raptor R is not listed. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | F-150 | Raptor |
| 2021-2025 | Ford | F-150 | V6-3.5L (tt) EcoBoost |
| 2022-2026 | Ford | Expedition | V6-3.5L (tt) EcoBoost |
| 2022-2025 | Lincoln | Navigator | V6-3.5L (tt) EcoBoost |
Mishimoto's turbo inlet tube kit replaces the restrictive factory inlet plumbing on the 3.5L EcoBoost twin-turbo V6 in the 2017-2020 Ford F-150 Raptor. It gives both turbochargers a larger path for incoming air, and Mishimoto reports that it works with the stock tune and with either the factory airbox or Mishimoto's F-150 EcoBoost performance air intake.
More volume, less restriction. Mishimoto states that the kit increases internal volume by up to 61 percent over the stock inlet pipes and cuts restriction by up to 23 percent, which its flow bench chart backs up with a 23.1 percent lower restriction reading than stock across the tested range.
Built for engine bay heat. The tubes are rotational-molded from cross-linked polyethylene (XLPE), a material Mishimoto chose because it tolerates high under-hood temperatures, resists fuel and oil, and keeps the intake charge insulated from the heat around it. The tube wall is 5 mm thick, so it holds its shape instead of flexing or cracking.
CEL-free fittings. Every vacuum fitting is CNC-machined from aluminum for a leak-free seal. The included EVAP fitting is also CNC-machined and, according to Mishimoto, was flow bench tested to match the factory part so the truck keeps running without a check engine light.
Complete kit. You receive both turbo inlet tubes, DuraCore silicone couplers and stainless-steel clamps, plus the hose, caps and hardware shown in Mishimoto's parts diagram, so the swap needs nothing extra. Like all Mishimoto F-150 EcoBoost parts, it carries the Mishimoto Lifetime Warranty.
Features
- Up to 61 percent more internal volume than the stock inlet pipes
- Up to 23 percent less restriction than stock
- 5 mm-thick XLPE construction resists heat, fuel and oil
- CNC-machined aluminum vacuum fittings and EVAP fitting
- Includes DuraCore silicone couplers and stainless-steel clamps
- Works with the stock airbox and the Mishimoto F-150 EcoBoost performance air intake
- Mishimoto Lifetime Warranty
Emissions: This kit is listed under CARB Executive Order D-759-16.
Fitment: Mishimoto lists this kit for the 2017-2020 Ford F-150 Raptor with the 3.5L EcoBoost engine, along with other 2017-2020 F-150 trims and 2018-2020 Expedition models shown below. Fitment confirmed against Mishimoto's published application list.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020 | Ford | Expedition | King Ranch |
| 2018-2020 | Ford | Expedition | Limited |
| 2020 | Ford | Expedition | Max King Ranch |
| 2018-2020 | Ford | Expedition | Max Limited |
| 2018-2020 | Ford | Expedition | Max Platinum |
| 2018-2020 | Ford | Expedition | Max SSV |
| 2018-2019 | Ford | Expedition | Max XL |
| 2018-2020 | Ford | Expedition | Max XLT |
| 2018-2020 | Ford | Expedition | Platinum |
| 2018-2020 | Ford | Expedition | SSV |
| 2018-2019 | Ford | Expedition | XL |
| 2018-2020 | Ford | Expedition | XLT |
| 2017-2020 | Ford | F-150 | King Ranch |
| 2017-2020 | Ford | F-150 | Lariat |
| 2017-2020 | Ford | F-150 | Limited |
| 2017-2020 | Ford | F-150 | Platinum |
| 2018-2020 | Ford | F-150 | Police Responder |
| 2017-2020 | Ford | F-150 | Raptor |
| 2017-2020 | Ford | F-150 | SSV |
| 2017-2020 | Ford | F-150 | XL |
| 2017-2020 | Ford | F-150 | XLT |
$474.99
K&N charge pipe kits are made of free-flowing, mandrel-bent aluminum tubes designed to replace the restrictive factory intercooler piping on specific turbo charged vehicles and offer a wide range of performance customization options. K&N charge pipes have been engineered to reduce turbo charged air pressure loss as well as dramatically increase air flow from the turbo through the intercooler. The charge pipes are constructed from lightweight aluminum with a durable gunmetal gray powder coated finish. For additional horsepower gains and improved engine compartment aesthetics, K&N offers a wide range of cold air intake systems that can be installed into your vehicle as well. The charge pipe kits are easy to install with commonly available tools and it is backed by K&N’s No-Hassle Lifetime Limited Warranty.
User 1Installation Instructions
- Easy to install with commonly available tool
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2026 | Ford | Bronco | Raptor |
| 2024-2026 | Ford | Ranger | Raptor |
$317.99
K&N charge pipe kits are made of free-flowing, mandrel-bent aluminum tubes designed to replace the restrictive factory intercooler piping on specific turbo charged vehicles and offer a wide range of performance customization options. K&N charge pipes have been engineered to reduce turbo charged air pressure loss as well as dramatically increase air flow from the turbo through the intercooler. The charge pipes are constructed from lightweight aluminum with a durable gunmetal gray powder coated finish. For additional horsepower gains and improved engine compartment aesthetics, K&N offers a wide range of cold air intake systems that can be installed into your vehicle as well. The charge pipe kits are easy to install with commonly available tools and it is backed by K&N’s No-Hassle Lifetime Limited Warranty.
User 1Installation Instructions
- Easy to install with commonly available tool
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2025-2026 | Ford | Expedition | Active |
| 2020-2026 | Ford | Expedition | King Ranch |
| 2018-2024 | Ford | Expedition | Limited |
| 2025-2027 | Ford | Expedition | Max Active |
| 2020-2026 | Ford | Expedition | Max King Ranch |
| 2018-2024 | Ford | Expedition | Max Limited |
| 2018-2026 | Ford | Expedition | Max Platinum |
| 2018-2026 | Ford | Expedition | Max SSV |
| 2018-2019,2022 | Ford | Expedition | Max XL |
| 2018-2024 | Ford | Expedition | Max XLT |
| 2018-2026 | Ford | Expedition | Platinum |
| 2018-2026 | Ford | Expedition | SSV |
| 2022-2024 | Ford | Expedition | Timberline |
| 2025-2026 | Ford | Expedition | Tremor |
| 2018-2019,2022 | Ford | Expedition | XL |
| 2023-2024 | Ford | Expedition | XL STX |
| 2018-2024 | Ford | Expedition | XLT |
| 2015-2026 | Ford | F-150 | King Ranch |
| 2015-2026 | Ford | F-150 | Lariat |
| 2016-2023 | Ford | F-150 | Limited |
| 2015-2026 | Ford | F-150 | Platinum |
| 2018-2026 | Ford | F-150 | Police Responder |
| 2017-2026 | Ford | F-150 | Raptor |
| 2016-2026 | Ford | F-150 | SSV |
| 2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2015-2026 | Ford | F-150 | XL |
| 2015-2026 | Ford | F-150 | XLT |
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.