Welcome to RaptorsOnly.com
-
Brands
Shop by brand
- 3D MAXpider
- Access
- Addictive Desert Designs
- Advan
- AEM Induction
- aFe
- Air Lift
- Airaid
- Alcon
- AlphaRex
- AMP Research
- AMS
- Anderson Composites
- ANZO
- ARB
- Atturo Tire
- AutoMeter
- AVS
- AWE Tuning
- BackRack
- Baer Brakes
- Baja Designs
- BAK
- Banks Power
- BBK
- BBS
- BD Diesel
- Belltech
- Bestop
- BFGoodrich
- BMC
- Body Armor 4x4
- Borla
- Brembo
- Brembo OE
- Bully Dog
- Bushwacker
- Camburg
- Clevite
- COBB
- Cometic Gasket
- COMP Cams
- CORSA Performance
- Covercraft
- CSF
- DBA
- DeatschWerks
- DFC
- Diode Dynamics
- DS18
- DV8 Offroad
- Eaton
- EBC
- Eibach
- Enkei
- Extang
- Fabtech
- Fel-Pro
- fifteen52
- Firestone
- Flowmaster
- Ford Racing
- Forgestar
- FORM Lighting
- FOX
- Garrett
- Gates
- GEN-Y Hitch
- Go Fast Bits
- Go Rhino
- Gram Lights
- Granatelli Motor Sports
- GSC Power Division
- Hawk Performance
- Hella
- Hellwig
- Hotchkis
- Husky Liners
- ICON
- Injen
- J&L
- JBA
- JLT
- K&N Engineering
- KC HiLiTES
- King Engine Bearings
- King Shocks
- Kleinn Air Horns
- Kooks Headers
- KYB
- LIQUI MOLY
- LUND
- Magnaflow
- Mahle OE
- Maxtrac
- Mayhem
- MBRP
- McGard
- Method Wheels
- MGP
- Michelin
- Mickey Thompson
- Mishimoto
- Moog
- Motul
- MTX Wheels
- N-Fab
- Nacho Offroad Technology
- NGK
- Nitrous Express
- Odyssey Battery
- ORACLE Lighting
- PowerStop
- Putco
- QA1
- Raceline
- Radium Engineering
- Rally Armor
- Rampage
- Raxiom
- Retrax
- Rhino-Rack
- Ridetech
- Rigid Industries
- Rival 4x4
- RockJock
- Roll-N-Lock
- Roush
- Royal Purple
- SCT Performance
- Skyjacker
- Snow Performance
- SPC Performance
- SPOD
- Stainless Works
- Superlift
- Superpro
- Timbren
- Torque Solution
- TOYO
- Truxedo
- Tuff Country
- Turbosmart
- UMI Performance
- Undercover
- Volant
- Vossen
- Wagner Tuning
- WeatherTech
- Weld
- Westin
- Whiteline
- Wilwood
- Yokohama Tire
- Yukon Gear & Axle
- Zone Offroad
No brands found. Try another name or initial.
156 brands
View all brands -
F-150 Raptor
- F-150 Raptor
-
1st Gen (2010-2014)
-
2nd Gen (2017-2020)
-
3rd Gen (2021-Present)
-
Raptor R (2023-Present)
-
Bronco Raptor
- Bronco Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
-
Ranger Raptor
- Ranger Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
Your cart
You'll love this too
Discount invalid. Please make sure the discount details are correct.
Discount code is already applied.
Discount applied!
Subheading
Product comparison
Describe you product comparison grid
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
246 products
246 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2014 | Ford | F-150 | FX2 |
| 2014 | Ford | F-150 | FX4 |
| 2014-2025 | Ford | F-150 | King Ranch |
| 2014-2025 | Ford | F-150 | Lariat |
| 2014,2016-2023 | Ford | F-150 | Limited |
| 2014-2025 | Ford | F-150 | Platinum |
| 2018-2025 | Ford | F-150 | Police Responder |
| 2017-2025 | Ford | F-150 | Raptor |
| 2016-2025 | Ford | F-150 | SSV |
| 2014,2024-2025 | Ford | F-150 | STX |
| 2014 | Ford | F-150 | SVT Raptor |
| 2021-2025 | Ford | F-150 | Tremor |
| 2014-2025 | Ford | F-150 | XL |
| 2014-2025 | Ford | F-150 | XLT |
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2025 | Ford | F-150 | King Ranch |
| 2015-2025 | Ford | F-150 | Lariat |
| 2016-2023 | Ford | F-150 | Limited |
| 2015-2025 | Ford | F-150 | Platinum |
| 2018-2025 | Ford | F-150 | Police Responder |
| 2017-2025 | Ford | F-150 | Raptor |
| 2016-2025 | Ford | F-150 | SSV |
| 2024-2025 | Ford | F-150 | STX |
| 2021-2025 | Ford | F-150 | Tremor |
| 2015-2025 | Ford | F-150 | XL |
| 2015-2025 | Ford | F-150 | XLT |
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2007-2008,2010-2014 | Ford | F-150 | FX2 |
| 2004-2014 | Ford | F-150 | FX4 |
| 2006-2008,2010-2012 | Ford | F-150 | Harley-Davidson Edition |
| 2005-2025 | Ford | F-150 | King Ranch |
| 2004-2025 | Ford | F-150 | Lariat |
| 2011 | Ford | F-150 | Lariat Limited |
| 2008,2013-2014,2016-2023 | Ford | F-150 | Limited |
| 2009-2025 | Ford | F-150 | Platinum |
| 2018-2025 | Ford | F-150 | Police Responder |
| 2017-2025 | Ford | F-150 | Raptor |
| 2016-2025 | Ford | F-150 | SSV |
| 2004-2014,2024-2025 | Ford | F-150 | STX |
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2008 | Ford | F-150 | THE 60TH ANNIVERSARY EDITION |
| 2021-2025 | Ford | F-150 | Tremor |
| 2004-2025 | Ford | F-150 | XL |
| 2004-2025 | Ford | F-150 | XLT |
| 2004 | Ford | F-150 Heritage | SVT Lightning |
| 2004 | Ford | F-150 Heritage | XL |
| 2004 | Ford | F-150 Heritage | XLT |
Twin Tube Gas Shock; Loop/Loop; 22.30 in. Extended; 13.40 in. Collapsed; Incl. Hardware; Two 0.4375 in. Sleeves; Must Be Installed w/Shock Shaft Towards The Top;
- Shock
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1976-1978,1983-1986,1997-2000 | Ford | F-150 | Base |
| 1975-1982,1987-1992 | Ford | F-150 | Custom |
| 1995-1996 | Ford | F-150 | Eddie Bauer |
| 2007-2008,2010-2014 | Ford | F-150 | FX2 |
| 2004-2014 | Ford | F-150 | FX4 |
| 2000-2003,2006-2008,2010-2012 | Ford | F-150 | Harley-Davidson Edition |
| 2001-2003,2005-2025 | Ford | F-150 | King Ranch |
| 1997-2025 | Ford | F-150 | Lariat |
| 2011 | Ford | F-150 | Lariat Limited |
| 1993-1995,1999-2003 | Ford | F-150 | Lightning |
| 2008,2013-2014,2016-2023 | Ford | F-150 | Limited |
| 1975-1978 | Ford | F-150 | Northland |
| 2009-2025 | Ford | F-150 | Platinum |
| 2018-2025 | Ford | F-150 | Police Responder |
| 1975-1981 | Ford | F-150 | Ranger |
| 1978-1981 | Ford | F-150 | Ranger Lariat |
| 1975-1981 | Ford | F-150 | Ranger XLT |
| 2017-2025 | Ford | F-150 | Raptor |
| 1995-1996 | Ford | F-150 | Special |
| 2016-2025 | Ford | F-150 | SSV |
| 2004-2014,2024-2025 | Ford | F-150 | STX |
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2008 | Ford | F-150 | THE 60TH ANNIVERSARY EDITION |
| 2021-2025 | Ford | F-150 | Tremor |
| 1982-2025 | Ford | F-150 | XL |
| 1982-1983 | Ford | F-150 | XLS |
| 1977,1983-1984,1993-2025 | Ford | F-150 | XLT |
| 1982,1985-1992 | Ford | F-150 | XLT Lariat |
| 2004 | Ford | F-150 Heritage | SVT Lightning |
| 2004 | Ford | F-150 Heritage | XL |
| 2004 | Ford | F-150 Heritage | XLT |
| 1983,1985-1986 | Ford | Ranger | Base |
| 1987-1992 | Ford | Ranger | Custom |
| 2001-2005 | Ford | Ranger | Edge |
| 1998-2002 | Ford | Ranger | EV |
| 2005-2009 | Ford | Ranger | FX4 |
| 1988-1989 | Ford | Ranger | GT |
| 2002 | Ford | Ranger | Postal |
| 1984,1986-1992 | Ford | Ranger | S |
| 1990 | Ford | Ranger | S Plus |
| 1993-1998 | Ford | Ranger | Splash |
| 1991-1993,1997,2006-2011 | Ford | Ranger | Sport |
| 1986-1997,2005-2007 | Ford | Ranger | STX |
| 2004 | Ford | Ranger | Tremor |
| 1983-1986,1993-2011 | Ford | Ranger | XL |
| 1995 | Ford | Ranger | XL Sport |
| 1983-1985 | Ford | Ranger | XLS |
| 1983-2011 | Ford | Ranger | XLT |
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2025 | Ford | F-150 | King Ranch |
| 2015-2025 | Ford | F-150 | Lariat |
| 2016-2023 | Ford | F-150 | Limited |
| 2015-2025 | Ford | F-150 | Platinum |
| 2018-2025 | Ford | F-150 | Police Responder |
| 2017-2025 | Ford | F-150 | Raptor |
| 2016-2025 | Ford | F-150 | SSV |
| 2024-2025 | Ford | F-150 | STX |
| 2021-2025 | Ford | F-150 | Tremor |
| 2015-2025 | Ford | F-150 | XL |
| 2015-2025 | Ford | F-150 | XLT |
King OEM performance kit custom tuned to provide your Ford with unparalleled levels of performance and ride quality. Each kit has been subjected to punishing real world testing to develop the optimal damping curve and spring rate for your vehicle. Easy bolt-on installation for stock height or custom kits for trucks running lifted aftermarket suspensions.
- External Finned Reservoirs Increase Fluid Capacity; Heat Dissipation And Provide Sustained Damping Performance
- Built From The Same Quality Materials And To The Same Precise Tolerances Pure Race Series Shocks
- Large 3.0 Diameter Shock Bodies Increase Fluid Capacity For Smoother; Cooler Running Shocks
- Fully Adjustable 3 Tube Bypass Shock Design Allows You To Adjust Compression And Rebound
- Bypass Shocks Have A Built In Bump Zone For Better Bottoming Control
- All New Threaded End Cap Design w/New Schrader Valve Protective Cap
- Factory Tuned For Optimal Ride Quality
- Made From Extruded 6061-T6 Aluminum
- 100 Percent Bolt On Installation
- 1 in. Diameter Shafts
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
King OEM performance kit custom tuned to provide your Ford with unparalleled levels of performance and ride quality. Each kit has been subjected to punishing real world testing to develop the optimal damping curve and spring rate for your vehicle. Easy bolt-on installation for stock height or custom kits for trucks running lifted aftermarket suspensions.
- Time Tested; Durable; Race Engineered
- Tuned For Every Vehicle Application
- Up To 45000 Miles Without Failure
- Long Wearing Urethane Seals
- 100 Percent Made In The USA
- Available In Custom Lengths
- Easy Bolt-On Installation
- Increases Wheel Travel
- All Necessary Hardware
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
King OEM performance kit custom tuned to provide your Ford with unparalleled levels of performance and ride quality. Each kit has been subjected to punishing real world testing to develop the optimal damping curve and spring rate for your vehicle. Easy bolt-on installation for stock height or custom kits for trucks running lifted aftermarket suspensions.
- External Finned Reservoirs Increase Fluid Capacity; Heat Dissipation And Provide Sustained Damping Performance
- Dynamometer Lab And Punishing Testing To Develop The Optimal Damping Curves And Spring Rates For Your Bronco
- Optional 2.5 Wide Range Compression Adjuster That Gives 20 Precise Clicks Of Compression Damping Adjustment
- Built From The Same Quality Materials And To The Same Precise Tolerances Pure Race Series Shocks
- Large 2.5 Diameter Shock Bodies Increase Fluid Capacity For Smoother; Cooler Running Shocks
- Fully Rebuildable; Serviceable And Tunable
- Factory Tuned For Optimal Ride Quality
- 100 Percent Bolt-On Performance
- Increased Wheel Travel
- Adjustable Ride Height
- Fits 35 in. Tires
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | Bronco | Badlands |
| 2021-2023,2025 | Ford | Bronco | Base |
| 2021-2025 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2025 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2025 | Ford | Bronco | Outer Banks |
| 2022-2025 | Ford | Bronco | Raptor |
| 2025 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
King OEM performance kit custom tuned to provide your Ford with unparalleled levels of performance and ride quality. Each kit has been subjected to punishing real world testing to develop the optimal damping curve and spring rate for your vehicle. Easy bolt-on installation for stock height or custom kits for trucks running lifted aftermarket suspensions.
- External Finned Reservoirs Increase Fluid Capacity; Heat Dissipation And Provide Sustained Damping Performance
- Dynamometer Lab And Punishing Testing To Develop The Optimal Damping Curves And Spring Rates For Your Bronco
- Optional 2.5 Wide Range Compression Adjuster That Gives 20 Precise Clicks Of Compression Damping Adjustment
- Built From The Same Quality Materials And To The Same Precise Tolerances Pure Race Series Shocks
- Large 2.5 Diameter Shock Bodies Increase Fluid Capacity For Smoother; Cooler Running Shocks
- Fully Rebuildable; Serviceable And Tunable
- Factory Tuned For Optimal Ride Quality
- 100 Percent Bolt-On Performance
- Increased Wheel Travel
- Adjustable Ride Height
- Fits 35 in. Tires
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | Bronco | Badlands |
| 2021-2023,2025 | Ford | Bronco | Base |
| 2021-2025 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2025 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2025 | Ford | Bronco | Outer Banks |
| 2022-2025 | Ford | Bronco | Raptor |
| 2025 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
King OEM performance kit custom tuned to provide your Ford with unparalleled levels of performance and ride quality. Each kit has been subjected to punishing real world testing to develop the optimal damping curve and spring rate for your vehicle. Easy bolt-on installation for stock height or custom kits for trucks running lifted aftermarket suspensions.
- Dynamometer Lab And Punishing Testing To Develop The Optimal Damping Curves And Spring Rates For Your F150
- External Reservoirs Increase Fluid Capacity; Heat Dissipation And Provide Sustained Damping Performance
- Optional Wide Range Compression Adjuster That Gives 20 Precise Clicks Of Compression Damping Adjustment
- Built From The Same Quality Materials And To The Same Precise Tolerances Pure Race Series Shocks
- Large 2.5 in. Shock Bodies Increase Fluid Capacity For Smoother; Cooler Running Shocks
- Adjustable Ride Height [Front Coilover Only]
- Fully Rebuildable; Serviceable And Tunable
- Factory Tuned For Optimal Ride Quality
- 100 Percent Bolt-On Performance
- Increased Wheel Travel
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2025 | Ford | F-150 | King Ranch |
| 2015-2025 | Ford | F-150 | Lariat |
| 2016-2023 | Ford | F-150 | Limited |
| 2015-2025 | Ford | F-150 | Platinum |
| 2018-2025 | Ford | F-150 | Police Responder |
| 2023-2025 | Ford | F-150 | Raptor |
| 2016-2025 | Ford | F-150 | SSV |
| 2024-2025 | Ford | F-150 | STX |
| 2021-2025 | Ford | F-150 | Tremor |
| 2015-2025 | Ford | F-150 | XL |
| 2015-2025 | Ford | F-150 | XLT |
The ICON Stage 2 Suspension System with Billet UCA (part number K93172) is built for the 2021-2026 Gen3 Ford F-150 Raptor and the Raptor R that still run their factory shock absorbers. It pairs new front and rear coil springs with ICON billet aluminum upper control arms, giving your truck a more aggressive stance, extra ground clearance and a better ride on and off the pavement. Because it is designed around the factory electronic shocks, they keep working exactly as Ford intended.
Front lift that suits your truck. The linear-rate front coil springs raise a standard Raptor 2.25 inches over stock and a Raptor R 2 inches, with consistent, predictable handling.
Billet upper control arms for alignment and travel. The included ICON billet aluminum UCAs add strength and durability, and allow on-vehicle caster and camber adjustment so the front end can be set up properly after the lift. They use ICON's patented Delta Joint Pro (U.S. Pat. 10,731,700), which provides 90 degrees of total articulation.
Triple-rate rear coils. The rear springs combine an extra-soft initial rate for droop travel, a performance ride rate for comfort and compliance, and an overload rate for carrying a load and resisting bottoming out. The tapered wire design gets the most travel from the coil, and the rear sits 1 inch higher than stock on Raptors without extra weight in the bed.
Finished for the long haul. Dual-stage powder coating helps protect the springs from corrosion, installation is bolt-on with no cutting, and ICON backs the springs with a lifetime guarantee against sagging or breakage.
Features
- Vehicle-specific design for the Gen3 F-150 Raptor with OE shock absorbers
- Compatible with all versions of available OE shock absorbers; maintains electronic shock functionality
- Linear-rate front coil springs: 2.25 in. lift on Raptor, 2 in. lift on Raptor R
- Billet aluminum upper control arms with on-vehicle caster and camber adjustment
- Delta Joint Pro with 90 degrees of total articulation
- Triple-rate rear coil springs with ICON-engineered droop, ride and overload rates
- Tapered wire rear coil design; 1 in. rear lift on Raptors without additional rear weight
- Dual-stage powder coating for corrosion resistance
- Bolt-on installation, no cutting required
- Lifetime guarantee against sagging or breakage
What is included: front coil springs, triple-rate rear coil springs and billet aluminum upper control arms with Delta Joint Pro ball joints, as described by ICON.
Fitment: ICON lists this system for the 2021-2026 Gen3 F-150 Raptor and names the Raptor R. Fitment confirmed against ICON Vehicle Dynamics' published product page.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
The ICON K93171X Stage 1 Overland suspension system is a coil spring upgrade built for the 2021-2026 Ford F-150 Raptor (Gen 3), including the Raptor R, that keeps the factory shock absorbers. ICON tunes this Overland version for Raptors that carry constant weight in the bed, so the rear sits level with about 300 lbs of added load instead of sagging.
Front lift without losing the electronic shocks. The linear-rate front coil springs raise the front 2.25 inches on a Raptor, or 2 inches on a Raptor R. The system is designed around the OE shocks, works with every version of the available OE shock absorbers, and maintains electronic shock functionality.
Rear springs made for upfitted trucks. The triple-rate rear coils use ICON-engineered droop, ride and overload rates. They deliver a 1 inch rear lift over stock on a Raptor carrying roughly 300 lbs of additional rear weight. The performance ride rate keeps comfort and compliance, while the overload rate improves load handling and resists bottoming out.
Tapered wire for droop travel. The rear coils use a tapered wire design with an extra soft initial rate, which gives the rear axle more droop travel and efficiency off-road.
Built to last and easy to fit. The springs have a dual stage powder coat for corrosion resistance, install as a bolt-on with no cutting, and carry ICON's lifetime guarantee against sagging or breakage.
Features
- Included: linear-rate front coil springs and triple-rate Overland rear coil springs, as ICON describes the system
- Front lift: 2.25 in on Raptor, 2 in on Raptor R
- Rear lift: 1 in on a Raptor with about 300 lbs of added rear weight
- Performance ride rate, overload rate and extra soft initial rate on the rear
- Tapered wire rear coil design
- Vehicle-specific design for the Gen 3 F-150 Raptor with OE shock absorbers
- Compatible with all versions of available OE shock absorbers
- Maintains electronic shock functionality
- Dual stage powder coating
- Bolt-on installation, no cutting required
- Lifetime guarantee against sagging and breakage
Fitment: ICON lists this system for the 2021-2026 Ford F-150 Raptor, with front lift figures for both the Raptor and the Raptor R. It is for trucks with OE shock absorbers. Fitment confirmed against ICON Vehicle Dynamics' published product page.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
The ICON Vehicle Dynamics Stage 1 suspension system (part K93171) is a coil spring upgrade for the 2021-2026 Ford F-150 Raptor. ICON engineered it for trucks that keep their factory shock absorbers, so you gain ride height and a new spring rate without replacing the shocks. It gives the Gen 3 Raptor a more aggressive stance and extra ground clearance.
Front lift that keeps the electronic shocks working. The linear-rate front coil springs raise the front end 2.25 inches over stock on the F-150 Raptor, or 2 inches on the Raptor R. ICON states the system is compatible with all versions of the available OE shock absorbers and maintains electronic shock functionality.
Triple-rate rear coils for ride, droop and load. The rear springs use ICON-engineered droop, ride and overload rates: a performance ride rate for compliance and comfort, an overload rate for load carrying and bottom-out resistance, and an extra-soft initial rate for maximum droop travel. ICON lists 1 inch of rear lift over stock on Raptors without additional weight in the rear.
Tapered wire design. The rear coils use a tapered wire design that ICON says achieves maximum travel and efficiency, significantly improving on- and off-road ride quality and performance over stock.
Built to last and simple to install. Dual-stage powder coating protects against corrosion. Installation is bolt-on with no cutting required, and ICON backs the springs with a lifetime guarantee against sagging or breakage.
What is in the kit. ICON lists two components: 95232 (qty 1), the 21-25 F-150 Raptor front spring kit, and 95230 (qty 1), the 21-25 F-150 Raptor triple-rate rear coil spring kit.
Features
- 2.25" of front lift over stock on the F-150 Raptor, 2" on the Raptor R
- Linear-rate front coil springs
- Triple-rate rear coil springs with ICON-engineered droop, ride and overload rates
- 1" of rear lift over stock on Raptors without additional weight in the rear
- Extra-soft initial rate for maximum droop travel
- Tapered wire rear coil design
- Vehicle-specific design for the Gen 3 F-150 Raptor with OE shock absorbers
- Compatible with all versions of available OE shock absorbers; maintains electronic shock functionality
- Dual-stage powder coating for corrosion resistance
- Bolt-on installation, no cutting required
- Lifetime guarantee against sagging/breakage
Application notes from ICON. Advertised lift heights are for a stock-equipped vehicle; added weight alters the lift. Requires recalibration of Advanced Driver Assistance Systems (ADAS) after install. Do not combine with coil spacers or damage may occur. Only fits OE coilovers; it will not fit ICON or other aftermarket coilovers. ICON lists OEM wheel and tire fitment as compatible and suggests 35x12.50 tires (37x12.50 with the 37 package), noting larger tires may need fender trimming.
Emissions. Prop 65: this product contains chemicals known to the State of California to cause cancer, birth anomalies, or other reproductive harm.
Fitment: ICON lists this system for the 2021-2026 Ford F-150 Raptor (Gen 3), with the Raptor R covered in its lift figures. Fitment confirmed against ICON Vehicle Dynamics' published product page.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
If you want a taller, more level front end on your 2024-2025 Ford Ranger Raptor without replacing the factory shocks, this ICON 2.25 inch front coilover spacer kit is a simple way to get there. It bolts in with the original coilover assemblies and adds 2.25 inches of front lift over stock.
Keeps the factory electronic shocks working. ICON designed these spacers to maintain full functionality of the stock electronic shock system, so you keep the Ranger Raptor's original damping behavior while raising the front.
Room for bigger wheels and tires. The added height helps keep oversized tires clear of the front fenders and gives the truck a more aggressive, level stance.
Protects the front suspension. ICON states the kit avoids overextending the stock front upper control arm ball joints and prevents over-cycling of the CV joints as the suspension approaches full extension.
Built from billet aluminum. The spacers are CNC machined from 6061 billet aluminum with a black anodized finish for corrosion resistance, and are covered by ICON's Limited Lifetime Warranty.
Features
- Vehicle specific design for Ford Ranger Raptor equipped with OE front coilovers
- No ball joint over extension or bind with full factory wheel travel
- Increases front ground clearance and provides more level stance
- Maintains functionality of factory electronic shock system
- Keeps oversized tires from interfering with front fenders
- Black anodized finish for excellent corrosion resistance
- Raises front ride height 2.25" over stock
- CNC machined 6061 aluminum components
Fitment: ICON lists this kit for the 2024-2025 Ford Ranger Raptor equipped with the original front coilovers. Fitment confirmed against ICON's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2025 | Ford | Ranger | Raptor |
The ICON Attitude Adjustment Collar (AAC) leveling kit, part number IVD6135B, raises the front of a 2021-2026 Ford F-150 Raptor by anywhere from 0.5 to 2.5 inches. It is built around the front-end layout of the third-generation Raptor and is installed without taking the factory shocks apart.
Five lift heights from one kit. A multi-height coil spring collar works together with a top-load shim that can be set up five different ways. That lets you choose a front lift between 0.5 and 2.5 inches over stock, so you can dial in the stance you want instead of buying a fixed-height spacer.
Keeps the factory shock in its ride zone. ICON says many alternatives gain height only by adding coil preload, which leaves the shock sitting in its rebound zone at ride height and hurts ride quality. ICON's collar and shim design is meant to hold the original shock in the ride zone, so the truck keeps its factory ride quality.
Simple installation. The kit does not require any disassembly of the shock, which ICON describes as a straightforward process compared with other leveling options for this truck. The collars also include mounting holes for Live Valve wire harnesses.
Built to last. The collars are CNC machined from 6061 billet aluminum with a black anodized finish for corrosion resistance. ICON backs the product with a limited lifetime guarantee against component breakage or manufacturer defect.
Features
- Multi-height design gives five front lift settings from 0.5 to 2.5 inches over stock
- Keeps the OE shock in the ride zone, maintaining factory ride quality
- Does not require disassembly of the shock for installation
- Mounting holes for Live Valve wire harnesses
- CNC machined 6061 billet aluminum construction
- Black anodized finish for corrosion resistance
- Lifetime guarantee against component breakage or manufacturer defect
Fitment: ICON lists this kit for the 2021-2026 Ford F-150 Raptor. Fitment confirmed against ICON Vehicle Dynamics' published product page.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
The ICON Attitude Adjustment Collar (AAC) is a front leveling kit built for the 2017-2020 Ford F-150 Raptor. It raises the front end between 0.5 and 2.25 inches over stock without taking the factory shock apart, so you can level the truck or add a little rake-correcting stance in an afternoon.
Five lift settings from one kit. A multi-height coil spring collar works with a top-load shim that ICON says can be set up five different ways, giving 0.5 to 2.25 inches of front lift. ICON describes the collar as patent pending.
Keeps the shock in its ride zone. ICON designed the collar and shim around the front-end dimensions of the second-generation Raptor. Other leveling options gain height only by preloading the coil, which ICON says puts the shock in the rebound zone at ride height and hurts ride quality. This kit is made to hold the OE shock in its working range and keep the factory ride.
Simple installation. The shock does not need to be disassembled to fit the kit, which ICON points to as a more straightforward process than other leveling options. The collar also has mounting holes for the 2019-2020 model-specific wire harnesses.
Built to last. The collars are CNC machined from 6061 billet aluminum with a black anodized finish for corrosion resistance. ICON backs the kit with a limited lifetime warranty against component breakage or manufacturer defect.
Features
- 0.5 to 2.25 inches of adjustable front lift over stock
- Multi-height collar plus top-load shim with five configurations
- Keeps the OE shock in the ride zone to maintain factory ride quality
- No shock disassembly required for installation
- Mounting holes for 2019-2020 model-specific wire harnesses
- CNC machined 6061 billet aluminum, black anodized finish
- Lifetime guarantee against component breakage or manufacturer defect
Fitment: ICON lists this kit for the 2017-2020 Ford Raptor (second generation). Fitment confirmed against ICON Vehicle Dynamics' published product page (part number IVD6130B).
Guides & Manuals
Installation InstructionsInstallation Instructions
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
This ICON billet upper control arm kit is built for the 2021-2026 Ford F-150 Raptor. It replaces the factory upper arms with CNC-machined 6061 aluminum arms that restore proper front-end geometry on a lifted truck and give you on-vehicle caster and camber adjustment, so the Raptor can be aligned correctly after a leveling or lift.
Corrects geometry on a lifted Gen 3 Raptor. ICON designed the arms to bring suspension geometry back into range and allow a proper alignment on Gen 3 Raptors with up to 3 inches of front lift. They also improve clearance around the suspension components.
Delta Joint PRO replaces the factory ball joint. ICON's patented Delta Joint PRO (U.S. Pat. 10,731,700) uses a larger ball with 56% more bearing surface than the standard Delta Joint and offers a full 90 degrees of articulation, 14% more range of motion than the original. That lets the front suspension move through full bump and droop travel without binding.
Built for abuse. The joint uses a chromoly ball and shaft with a bearing surface hardened to Rockwell C 55, replaceable graphite-impregnated sintered metal races, and a redesigned lubrication system whose channels spread grease evenly without extending past the bearing seal.
Precise at the chassis pivots. FK 7/8 inch rod ends at the chassis pivots give smooth, precise movement through the whole range of travel, and ICON's double adjuster sleeve makes caster and camber changes quick on the vehicle.
Complete kit. The kit includes the arms and the hardware needed for installation.
Features
- Corrects suspension geometry and allows proper wheel alignment on Gen 3 Raptors with up to 3 inches of front lift
- Patented Delta Joint PRO allows maximum articulation without binding
- FK rod ends at the chassis pivots for strength and precision
- CNC machined 6061 billet aluminum with a satin anodized finish
- Quick, precise on-vehicle adjustment for both caster and camber
- Delta Joint PRO is 100% serviceable and rebuildable
- Built-in O-ring sealed dust cover cap
Emissions and warnings: this part is not emissions related. ICON lists it under California Proposition 65.
Fitment: ICON lists this kit for the 2021-2026 Ford F-150 Raptor. Fitment confirmed against ICON's published product page for part 98564DJ.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
The ICON 98562DJ is a pair of CNC-machined billet aluminum upper control arms built for the Ford F-150 Raptor. They correct front-end geometry that is thrown off when the truck is lifted or leveled, add adjustable camber and caster, and open up clearance around the suspension. The kit comes with ICON's Delta Joint in place of the factory ball joint, and it includes the hardware needed to install it.
Better geometry and on-truck alignment. ICON's double adjuster sleeves let you set camber and caster while the arms stay on the truck, so alignment changes do not mean pulling the arms off the vehicle.
Full bump and droop travel. Swapping out the OE ball joint for the Delta Joint removes the binding that limits travel. The Delta Joint pairs the durability of a ball joint with the angularity of a traditional uniball.
Built for daily driving. A zinc-plated housing gives the first layer of corrosion resistance, and a grease seal keeps dirt and water out of the joint. The metal-on-metal design is greasable, which helps it last and run quietly on the street, unlike an exposed uniball.
Strong, light billet construction. Each arm is machined from 6061 aluminum, which keeps weight down while holding up to hard off-road use. The 7/8 inch FK rod ends are PTFE lined for smooth, precise movement through the full range of travel.
Features
- CNC machined 6061 billet aluminum construction for light weight and exceptional strength
- Camber and caster adjustability allows for precise wheel alignment
- ICON double adjuster sleeves allow for on-vehicle adjustment
- Vehicle specific taper pin provides OE-like fitment
- PTFE Lined 7/8 inch FK Rod Ends for improved response
- Built in o-ring sealed dust cover cap
- Features ICON's patented Delta Joint
Fitment: ICON describes this kit as made for the 2010-2020 Ford Raptor. Ford built the F-150 Raptor in 2010-2014 (SVT Raptor) and again in 2017-2020, so those are the model years listed below. ICON publishes no separate vehicle list for this part; fitment confirmed against the application stated on ICON's product page.
Guides & Manuals
Installation InstructionsInstallation Instructions
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
| 2010-2014 | Ford | F-150 | SVT Raptor |
The ICON 95232 Front 2.25in. Lift Coil Spring Kit raises the front of a Gen 3 Ford F-150 Raptor by 2.25 inches over stock, and by 2 inches on the Raptor R. It is a vehicle-specific pair of springs that goes straight onto the factory front coilovers, so you gain ride height without replacing your shocks.
More clearance and room for bigger tires. The added front height gives you extra ground clearance and distance to bump, and it makes room for a more aggressive wheel and tire combination while giving the truck a more commanding stance on and off the road.
Works with the factory electronic shocks. ICON designed these springs to fit every version of the available OE coilovers and to maintain electronic shock functionality, so the truck keeps its adjustable ride control.
Linear rate for predictable handling. The springs use a linear rate, which gives consistent, predictable response and a balance of comfort and capability.
Built to last. A dual-stage powder coating protects against corrosion in harsh conditions, and ICON backs the springs with a lifetime guarantee against sagging or breakage.
Straightforward installation. Installation is bolt-on with no cutting or modifications required, and it installs onto the stock front shock absorbers.
Features
- 2.25in. of front lift over stock on the Raptor, 2in. on the Raptor R
- Vehicle-specific design for the Gen 3 F-150 Raptor OE front coilovers
- Compatible with all versions of the available OE coilovers
- Maintains electronic shock functionality
- Linear rate coil springs
- Dual-stage powder coating for maximum corrosion resistance
- Bolt-on installation with no cutting required
- Lifetime guarantee against sagging or breakage
Fitment: ICON lists this kit for the 2021-2026 Gen 3 Ford F-150 Raptor and the Raptor R. Fitment confirmed against ICON's published product page.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
ICON Overland Triple Rate rear coil springs are a direct-fit replacement for the rear springs on the 2021-2026 Ford F-150 Raptor. They add a modest amount of ground clearance and a more controlled ride on pavement and trail, and they are built to work alongside ICON shocks and other ICON suspension components.
Three spring rates in one coil. A performance ride rate keeps the truck compliant and comfortable, an overload rate resists bottoming out under load, and an extra-soft initial rate lets the rear axle drop for maximum droop travel.
Built to stay seated. A tapered wire design gets the most travel and efficiency out of the coil, and the extra-long free height keeps each spring in its coil bucket through up to 17" of droop travel.
Rear lift where it counts. ICON designed these springs to net about 1" of rear lift on a Gen3 Raptor carrying roughly 300 lbs of added rear weight, such as a bumper, bed rack or camping gear. That gives a more level stance and extra fender clearance for larger wheels and tires on a more heavily equipped truck.
Protected and guaranteed. A dual-stage powder coat resists corrosion, and like all ICON coil springs these carry a lifetime guarantee against sagging and breakage.
Features
- Triple rate rear coil springs with ICON-engineered droop, ride and overload rates
- About 1" of rear lift over stock on Raptors carrying roughly 300 lbs of additional rear weight
- Tall free height keeps the coils seated in the buckets for up to 17" of droop
- Tapered wire design for maximum travel and efficiency
- Significantly improves on- and off-road ride quality over stock
- Dual-stage powder coating for corrosion resistance
- Vehicle-specific design for the Gen3 F-150 Raptor
- Lifetime guarantee against sagging and breakage
Fitment: ICON lists this kit for the 2021-2026 Ford F-150 Raptor (rear). Fitment confirmed against ICON Vehicle Dynamics' published listing for part 95231.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
These ICON Triple Rate rear coil springs are made to replace the factory rear springs on the 2021-2026 Ford F-150 Raptor. They add a modest 1 inch of rear lift on a stock-weight truck while changing how the rear suspension handles everyday roads, washboard and fast desert runs.
Three spring rates in one coil. ICON winds each spring with a softer initial rate for droop travel, a performance ride rate for comfort and control, and an overload rate that resists bottoming when the bed is loaded or the truck lands hard.
Built to stay seated. The extra-long free height keeps the coil in its bucket through up to 17 inches of droop travel, so the spring does not unseat when the rear axle drops.
Efficient tapered wire. A tapered-wire design delivers travel and rate with less wasted material, and a dual-stage powder coat protects the springs against corrosion.
Stance and clearance. The rear sits about 1 inch higher than stock on a Raptor carrying no extra weight in the bed, which gives a more aggressive stance and more fender room for larger wheels and tires. Pairing the springs with ICON shocks and other ICON suspension components gets the best results.
Features
- Triple-rate design: droop, ride and overload rates engineered by ICON
- 1 inch of rear lift over stock on a Raptor without added rear weight
- Tall free height keeps the coils seated for up to 17 inches of droop
- Tapered wire for travel and efficiency
- Dual-stage powder coat for corrosion resistance
- Vehicle-specific design for the Gen 3 F-150 Raptor
- Lifetime guarantee against sagging and breakage
Fitment: ICON lists this kit for the 2021-2026 Ford F-150 Raptor. Fitment confirmed against ICON Vehicle Dynamics' published product page for part 95230.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
The ICON 1.5-inch Rear Bump Stop Spacer Kit is built for 2017-2020 Ford F-150 Raptors that run ICON Multi-Rate Leaf Springs. It drops the factory rear bump stops 1.5 inches so the stock stops sit where they should once the springs are changed.
Keeps correct suspension travel. ICON says the spacers reposition the stock bump stops to maintain proper travel and let you keep using the OE bump stops without over-cycling the ICON leaf springs. This kit is for trucks running the ICON Multi-Rate Leaf Springs, as ICON specifies.
Machined from 6061 aluminum. Each spacer is precision CNC machined from high-strength 6061 aluminum, so it is durable and adds very little weight to the rear of the truck.
Bolt-on installation. The design is a straightforward bolt-on, and the mounting hardware is included in the kit, as the photo shows: two spacers and two bolts.
Features
- Lowers the factory rear bump stops 1.5"
- Lets the stock rear bump stops be used with ICON Multi-Rate Leaf Springs
- Precision CNC machined from 6061 aluminum
- Mounting hardware included
- Simple bolt-on installation
Fitment: ICON's product page title for this part says 2010-2014, but ICON's description specifies 2017-2020 Ford F-150 Raptor models equipped with ICON Multi-Rate Leaf Springs, and ICON lists a separate part for the 2010-2014 Raptor. We used the 2017-2020 application from ICON's description. Fitment confirmed against ICON's published product description.
Guides & Manuals
Installation InstructionsInstallation Instructions
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
This ICON rear bump stop spacer kit (part 95221) is built for the 2010-2014 Ford F-150 SVT Raptor that runs ICON Multi-Rate Leaf Springs. It drops the factory rear bump stops by 2.75 inches so the stock stops keep working as intended after the spring swap.
Keeps the factory bump stops useful. ICON's leaf springs change how the rear axle travels. These spacers move the OE bump stops down into the right spot, so you can keep using them without the springs cycling past their intended range.
Protects suspension travel. With the stops repositioned, the rear suspension keeps its correct travel and gets a defined stopping point at full compression, on the road and off it.
Machined from 6061 aluminum. Each spacer is CNC machined from high-strength 6061 aluminum, which gives you durability with very little added weight.
Straightforward bolt-on install. The kit includes the mounting hardware, and ICON lists it as a simple bolt-on job.
Features
- Lets the stock rear bump stops be used with ICON Multi-Rate Leaf Springs
- Lowers the rear bump stops 2.75"
- CNC machined from 6061 aluminum
- Mounting hardware included
- Simple bolt-on installation
Fitment: ICON lists this kit for 2010-2014 Ford F-150 SVT Raptor models fitted with ICON Multi-Rate Leaf Springs. Fitment confirmed against ICON Vehicle Dynamics' published product page.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
The ICON 95206R is the passenger-side rear shock from ICON Vehicle Dynamics' 3.0 Series Zeta RXT line, built for the 2021-2026 third-generation Ford F-150 Raptor. It is a three-tube bypass shock with a 3.0" remote reservoir and ICON's Compression Damping Electronic Valve (CDEV), made to bolt into the factory rear shock location while adding rear wheel travel and heat capacity.
More travel from the factory mount. ICON says the shock length is specific to the Raptor and is meant to be paired with ICON rear coil springs, giving up to 17 inches of rear wheel travel. A side-mounted upper eyelet makes the shock shorter collapsed and longer at full extension while still using the factory mounting location.
Cooler oil under hard use. The recirculating dual-hose reservoir (patent pending) uses a check valve to swap hot oil from the shock body with cooler oil from the 12.5" long, 3.0" diameter finned reservoir. ICON says this lets the truck be driven harder for longer without shock fade.
Tool-free tuning. Each bypass valve has its own port design and spring rate for its zone of travel, with damped valve stops that avoid the clicking noise typical of bypass shocks. Detented adjustment knobs turn in quarter-turn steps, so you can go from plush off-road settings to firmer street settings in seconds.
Electronic compression control. The CDEV valve meters oil flow to change compression damping force, and ICON says it reacts in under 40 ms. Used with ICON Intelligent Control and the ICON mobile app, it uses the onboard G-force sensor and gyroscope to predict terrain and adjust the valve. The shocks are no longer wired directly to the Raptor's ECU, so damping can be set independently of the selected drive mode.
Serviceable design. The bypass tubes are replaceable during a standard rebuild if one is damaged, rather than replacing the whole shock body. A protective shin guard shields the shaft from debris strikes, and an Anti-Wobble Link (patent pending) keeps the bypass tubes clear of the wheel and tire.
Features
- Passenger-side rear, 3.0 RXT three-tube bypass shock with 3.0 remote reservoir
- CDE valve for in-vehicle and active compression damping adjustment, independent of bypass settings
- 12.5" finned aluminum reservoir with recirculating dual-hose design
- Tool-free detented bypass knobs in quarter-turn increments
- High-flow CNC machined welded bypass blocks
- Replaceable bypass tubes, Cerakoted cylinder, hard anodized aluminum bypass tubes
- Application-specific length for up to 17" of rear wheel travel with ICON rear coil springs
- Side-mounted upper eyelet, direct bolt-in to the OEM location
- Shin guard and Anti-Wobble Link
Emissions: This is a suspension part with no emissions equipment. Prop 65 warning applies to this product.
Fitment: ICON lists this shock for the 2021-2026 Gen 3 Ford F-150 Raptor, passenger side rear. Fitment confirmed against ICON Vehicle Dynamics' published product listing.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
The ICON 95206L is the driver-side rear shock from ICON Vehicle Dynamics' RXT 3.0 Zeta bypass series, built specifically for the 2021-2026 third-generation Ford F-150 Raptor. It pairs a 3-tube bypass body with a 3.0-inch remote reservoir and ICON's electronically controlled CDEV compression valve, so you can tune how the rear of the truck rides on the street, in the dirt and under load.
Built for more rear wheel travel. ICON designed the shock length to be paired with its rear coil springs, which it says gives up to 17 inches of rear wheel travel. A side-mounted upper eyelet makes the shock shorter when collapsed and longer at full extension while still using the factory mounting location.
Cooler, more consistent damping. The recirculating dual-hose remote reservoir (patent pending) uses a check valve to swap hot fluid in the shock body for cooler fluid in the 12.5-inch finned reservoir. That extra surface area and nitrogen volume helps the shock resist fade when the truck is driven hard for long stretches.
Tool-free bypass tuning. Each bypass valve has its own port design and spring rate for its zone of shock travel, with damped valve stops that avoid the clicking noise common on other bypass shocks. Detented knobs adjust in quarter-turn increments by hand, from a plush off-road setting to a firmer on-road setting for the mountains or towing.
Electronic compression control with CDEV. The Compression Damping Electronic Valve meters oil flow to set compression damping and, according to ICON, reacts in under 40 milliseconds. Powered by ICON Intelligent Control and the ICON mobile app, it uses the onboard G-force sensor and gyroscope to predict terrain and adjust the shock. Because the shocks no longer rely on the Raptor's factory ECU signal, damping can be set independently of the selected drive mode.
Serviceable construction. The bypass tubes are replaceable, so a damaged tube can be swapped during a rebuild instead of replacing the whole shock body. A shin guard protects the shaft's sealing surface from debris strikes, and the cylinder is Cerakote finished with hard anodized aluminum bypass tubes.
Features
- Driver-side rear shock for the 2021-2026 Ford F-150 Raptor, direct bolt-in to the factory location
- 3.0 RXT 3-tube bypass design with a 3.0-inch remote reservoir
- CDEV valves allow in-vehicle and active compression damping adjustment, independent of bypass settings
- Recirculating dual-hose reservoir (patent pending) with a 12.5-inch finned aluminum body
- Tool-free, quarter-turn detented bypass adjustment knobs
- High-flow CNC machined welded bypass blocks
- Application-specific length for up to 17 inches of rear wheel travel with ICON rear coil springs
- Anti-Wobble Link (patent pending) keeps the bypass tubes clear of the wheel and tire
- Replaceable bypass tubes, protective shin guard, Cerakote cylinder finish
Fitment: ICON lists this shock for the 2021-2026 Ford F-150 Raptor (third generation), driver rear. Fitment confirmed against ICON's published product page for part 95206L.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
The ICON 95120 Rear Hydraulic Air Bump Stop Kit replaces the factory foam rear bump stops on the 2010-2014 Ford F-150 SVT Raptor with a tunable, oil-and-nitrogen hydro-pneumatic air bump on each side. It is built for Raptor owners who load the truck down or hit obstacles at speed, and it is designed to bolt on without removing the truck bed.
Why the factory bump stop falls short. The stock rear bump stop is foam rubber with limited energy capacity. ICON notes that it can squish out of its mount and allow metal-to-metal contact, and that the surrounding frame is not built for repeated hard bottoming. Over time that can lead to frame damage that is not covered by warranty.
Spring and shock in one. An internal nitrogen charge compresses like the OEM bump stop, acting as a spring. Oil and a damping piston control how much energy returns to the suspension, which reduces rear-end kick. The air bump can be tuned for low forces early in the travel and rapidly rising resistance at the end, and it resists more the faster it is hit.
Frame support. Clamshell brackets with triangulated cross braces give a rigid mount for the air bump and help support a known weak area of the frame. A solid 6061 billet cross bar, polished and anodized, and tension rods tie the frame rails together to resist twisting under hard impacts.
Full travel preserved. The air bump has 2.5 inches of travel and is designed for increased leaf spring clearance, so there is no loss of up travel with stock or aftermarket springs. On-road manners stay comfortable.
Features
- Linear-digressive piston with tuning by valve stack, oil volume and nitrogen pressure
- Velocity-sensitive hydraulic bump stop absorbs more energy the faster it is hit
- Clamshell brackets strengthen the frame in critical areas
- Cross member and tension rods stabilize the frame rails
- 6061 solid billet cross bar, polished and anodized
- Pre-tuned and nitrogen charged for most Ford Raptors
- Urethane rod seal and wiper for long service life
- CAD plated body for corrosion-free service
- User serviceable and tunable
- Integrated adjustability for future ICON Raptor-specific products
- Bump stop striker pad does not require leaf spring disassembly
Fitment: ICON lists this kit for the 2010-2014 Ford Raptor (F-150 SVT Raptor). Fitment confirmed against ICON Vehicle Dynamics' published product page (part 95120).
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
This is the ICON Vehicle Dynamics 3.0 series front coilover shock for the passenger side of the 2010-2014 Ford F-150 SVT Raptor. It pairs a true 3 inch main piston with a remote reservoir and an external Compression Damping Control Valve (CDCV), so you can tune the front end of your Raptor for the terrain you actually drive.
Built around a true 3 inch main piston. Rather than bypassing a small internal piston, which can cost control, road holding and cornering, ICON starts with a full-size 3 inch piston and adds digressive rebound and a flutter-stack compression design. ICON says this gives strong control and a responsive ride.
Extra control in the last 40% of travel. An internal hydraulic system, similar in function to an external hydraulic bumpstop, builds the high forces needed near full compression so the shock resists bottoming out under hard hits.
Adjustable compression damping. The external CDCV works across the entire stroke and offers 10 settings, each with a noticeable difference between soft and firm, so you can set the ride to your own preference.
Tuned for the SVT Raptor. ICON developed the multi-stage compression and rebound damping independently and tested it on and off road on the Raptor front suspension. The shock bolts into the factory location. This listing is the passenger-side shock only.
Features
- ICON-engineered Eibach 3 5/8 inch ID chrome silicon steel springs for added travel and performance
- Easy-to-adjust, high-resolution compression adjuster for fine tuning on different terrain
- Direct bolt-in to the OEM location, with reservoir placement chosen for heat dissipation and protection
- Nitrogen-charged 6063-T832 aluminum 10 inch remote reservoir, precision CNC honed and hard anodized
- Internal hydraulic bump zone for maximum bottom-out control in the last 40% of travel
- 3.0 OEM-replacement remote reservoir, compression-adjustable front coilover shock
- Multi-stage cad-plated finish with polished and anodized top cap and rod ends
- Extended droop travel for better performance on and off road
- Com 12 PTFE-lined bearings for strength and durability
- Oversized 1 inch heavy-duty CNC-machined shock shaft
- Adjustable ride height from 1 to 3.5 inches of lift
Fitment: ICON lists this part (95000R) for the 2010-2014 Ford F-150 SVT Raptor. Fitment confirmed against ICON Vehicle Dynamics' published product page.
Guides & Manuals
Installation InstructionsInstallation Instructions
Installation Instructions
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
This ICON Vehicle Dynamics 3.0 Series front coilover is the driver side remote reservoir shock with a compression damping control valve (CDCV), part 95000L, built to replace the front suspension on the 2010-2014 Ford F-150 SVT Raptor. It pairs a true 3-inch main piston with an adjustable reservoir, so you can tune ride quality for the street, trail or high-speed desert running.
A true 3" main piston instead of a bypass design. ICON does not rely on a small internal piston that gives up control, road holding and cornering. The shock uses a full 3-inch main piston with digressive rebound and a flutter stack on compression, which ICON says delivers firm control, quick response and a composed ride.
Extra bottom-out control in the last 40% of travel. An additional internal hydraulic system, much like an external hydraulic bump stop, builds the large forces needed near the end of the stroke. The multiple compression and rebound stages were tuned independently for the Raptor's front suspension.
Easy-to-adjust compression damping. The external Compression Damping Control Valve works across the entire stroke and gives 10 high-resolution settings, each with a noticeable change in feel from soft to firm, so you can set up the truck to your own preference.
Direct bolt-in fitment. The shock mounts in the factory location, with the reservoir positioned for good heat dissipation and protection.
Features
- ICON engineered Eibach 3 5/8" ID chrome silicon steel springs that offer increased travel and performance
- Easy-to-adjust, high-resolution compression adjuster for fine tuning on all types of terrain
- Direct bolt-in to the OEM location with optimum reservoir positioning for heat dissipation and protection
- Nitrogen-charged 6063-T832 aluminum 10" remote reservoirs, precision CNC honed and hard anodized
- Internal hydraulic bump zone designed for maximum G-out control in the last 40% of travel
- 3.0 OEM replacement remote reservoir, compression adjustable front coilover shock
- Multi-stage cad plated finish with polished and anodized top cap and rod ends
- Extended droop travel and increased overall performance on and off road
- Com 12 PTFE-lined bearings for strength and durability
- Oversized 1" heavy duty CNC machined shock shafts
- Adjustable ride height from 1 to 3.5" of lift
Fitment: this is the driver side front shock for the 2010-2014 Ford F-150 SVT Raptor. Fitment confirmed against ICON Vehicle Dynamics' published product listing for part 95000L, which names the Ford Raptor, 2010-14.
Guides & Manuals
Installation InstructionsInstallation Instructions
Installation Instructions
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
The ICON Intelligent Control (IIC) Install Kit is the brain of ICON’s electronically adjustable shock system. It is a compact controller that reads the truck’s movement and tells each Compression Damping Electronic Valve (CDEV) shock how firm or soft to be, so the ride adapts to the terrain instead of staying fixed. This kit includes the IIC module with the application specific bracket, wiring harness and hardware to mount it in the truck.
Reads the terrain in real time. An onboard G-force sensor and gyroscope feed the controller, which runs ICON’s algorithms together with your own settings to predict terrain and wheel position. It samples more than 1000 times per second and sends damping changes to the CDEV valves in under 40 milliseconds.
Adjust it from your phone. The IIC also acts as the link to ICON’s mobile app over Bluetooth on an iOS device. From the app you can raise or lower baseline firmness and tune the vertical G-Boost and lateral Corner Boost response without leaving the truck. Preconfigured Drive Modes (Normal, Desert and Haul) are included, and you can save unlimited presets of your own.
Built-in data logging. The app can record time, speed, distance and G-forces from a trip, giving you a record of how hard the suspension worked.
Made for ICON CDEV shocks. The IIC is the controller for ICON’s CDEV shock absorbers. ICON’s own 2021-2026 F-150 Raptor rear CDEV shocks are described as powered by ICON Intelligent Control, so this kit is the matching controller for that system.
Clean, bolt-on mounting. Application specific brackets, hardware and wire harnesses are included so the controller mounts neatly without cutting or custom fabrication.
Features
- Processes sensor inputs, algorithms and user settings more than 1000 times per second
- Selectable active shock damping plus manual adjustment of baseline settings without leaving the vehicle
- Data logger for time, speed, distance and G-force
- Mobile app with preconfigured Drive Modes and custom presets, connected by Bluetooth to an iOS device
- Sends damping commands to CDEV shocks that react in under 40 milliseconds
- Onboard sensors monitor G-forces and chassis movement
- Application specific mounting bracket, hardware and wire harnesses
Fitment: ICON lists this kit for the 2015-2026 Ford F-150 and the 2017-2022 Ford Super Duty without limiting it by trim, and pairs the IIC with its 2021-2026 F-150 Raptor CDEV rear shocks. Raptor years run 2017-2020 and 2021-2026. Fitment confirmed against ICON Vehicle Dynamics’ published application list. ICON’s page does not name the Raptor R.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | Raptor |
| 2015-2026 | Ford | F-150 | All models (ICON lists the F-150 2015-2026 broadly) |
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | Police Responder |
| 2021-2026 | Ford | F-150 | SSV |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
| 2024-2026 | Ford | F-150 | STX |
| 2017-2022 | Ford | F-250 Super Duty | King Ranch |
| 2017-2022 | Ford | F-250 Super Duty | Lariat |
| 2017-2022 | Ford | F-250 Super Duty | Platinum |
| 2017-2022 | Ford | F-250 Super Duty | XL |
| 2017-2022 | Ford | F-250 Super Duty | XLT |
| 2018-2022 | Ford | F-250 Super Duty | Limited |
| 2017-2022 | Ford | F-350 Super Duty | King Ranch |
| 2017-2022 | Ford | F-350 Super Duty | Lariat |
| 2017-2022 | Ford | F-350 Super Duty | Platinum |
| 2017-2022 | Ford | F-350 Super Duty | XL |
| 2017-2022 | Ford | F-350 Super Duty | XLT |
| 2018-2022 | Ford | F-350 Super Duty | Limited |
The ICON 614564 Retrofit Delta Joint Kit lets you swap the ball joints in a non-ICON upper control arm for ICON's patented Delta Joint. It is built for arms that use a 1 inch uniball, and it suits lifted Ford F-150 and Raptor trucks that need more upper control arm angle than a standard ball joint allows.
Ball joint durability with uniball movement. The Delta Joint is a heavy-duty, high-angle ball joint. It combines the toughness of a ball joint with the articulation of a traditional uniball, so a lifted truck keeps its suspension travel without the bind a stock joint can cause.
Sealed against the elements. A uniball is open to water, road salt and debris, which is its main weakness on a daily driver. The Delta Joint adds a zinc-plated housing and a tough grease seal to keep contaminants out of the joint.
Quiet and serviceable. Metal-on-metal internals and a greaseable design are made for long life and noise-free operation.
Made for aftermarket arms. This kit adapts the Delta Joint to a wide range of non-ICON upper control arms that take a 1 inch uniball. Application-specific taper pins give a precise fit across the vehicles it covers.
Features
- Patented Delta Joint (U.S. Pat. 10,731,700) combines the durability of a ball joint with the performance characteristics of a traditional uniball
- Carburized taper pin gives more corrosion resistance, less internal friction and less chance of thread galling on assembly
- Retrofit kit fits a wide range of aftermarket upper control arms that use a 1" uniball
- Sealed design and zinc-plated housing protect against the elements, road salts and debris
- Metal-on-metal internals and a greaseable design for longevity and noise-free operation
- Kit includes a pair of Delta Joints, retaining rings and a supply of anti-seize
- Application-specific taper pins for a precise fit across a wide range of vehicles
- Pullout strength greater than a comparable industry-standard uniball
- Capable of the high angularity needed for lifted applications
Fitment: ICON lists this kit for 2004-2020 Ford F-150 models, with no Raptor exclusion. The application list below names the 2010-2014 SVT Raptor and the 2017-2020 F-150 Raptor. Fitment confirmed against ICON's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2007-2008,2010-2014 | Ford | F-150 | FX2 |
| 2004-2014 | Ford | F-150 | FX4 |
| 2006-2008,2010-2012 | Ford | F-150 | Harley-Davidson Edition |
| 2005-2020 | Ford | F-150 | King Ranch |
| 2004-2020 | Ford | F-150 | Lariat |
| 2011 | Ford | F-150 | Lariat Limited |
| 2008,2013-2014,2016-2020 | Ford | F-150 | Limited |
| 2009-2020 | Ford | F-150 | Platinum |
| 2018-2020 | Ford | F-150 | Police Responder |
| 2017-2020 | Ford | F-150 | Raptor |
| 2016-2020 | Ford | F-150 | SSV |
| 2004-2014 | Ford | F-150 | STX |
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2008 | Ford | F-150 | THE 60TH ANNIVERSARY EDITION |
| 2004-2020 | Ford | F-150 | XL |
| 2004-2020 | Ford | F-150 | XLT |
The ICON 614554 Retrofit Delta Joint Kit swaps the ball joints in an ICON upper control arm for ICON's patented Delta Joint. It is a pair of heavy-duty, high-angle ball joints for lifted trucks that need more upper control arm angle than a standard ball joint allows, and ICON lists it for 2004-2020 Ford F-150 models, which includes the F-150 Raptor.
Ball joint durability with uniball movement. The Delta Joint combines the toughness of a ball joint with the articulation of a traditional uniball, so the front suspension can move through its travel with little bind.
Sealed against the elements. An open uniball is exposed to water, road salt and debris, which is its main weakness on a daily driver. The Delta Joint adds a zinc-plated housing and a tough grease seal to keep contaminants out of the joint.
Quiet and serviceable. Metal-on-metal internals and a greaseable design are made for long life and noise-free operation.
Built for ICON arms. This retrofit kit is made to bring the Delta Joint to ICON upper control arms. Application-specific taper pins give a precise fit across the vehicles it covers.
Features
- 5 Year ICON Limited Warranty when used with ICON Vehicle Dynamics suspension components (see iconvehicledynamics.com/deltajoint for details)
- Patented Delta Joint (U.S. Pat. 10,731,700) combines the durability of a ball joint with the performance characteristics of a traditional uniball
- Carburized taper pin gives more corrosion resistance, less internal friction and less chance of thread galling on assembly
- Sealed design and zinc-plated housing protect against the elements, road salts and debris
- Metal-on-metal internals and a greaseable design for longevity and noise-free operation
- Application-specific taper pins for a precise fit across a wide range of vehicles
- Pullout strength greater than a comparable industry-standard uniball
- Capable of the high angularity needed for lifted applications
Fitment: ICON lists this kit for 2004-2020 Ford F-150 and 2009-2023 Ram 1500 models fitted with ICON upper control arms, with no Raptor exclusion. The application list below names the 2010-2014 SVT Raptor and the 2017-2020 F-150 Raptor. Fitment confirmed against ICON's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2009-2010 | Dodge | Ram 1500 | Laramie |
| 2009-2010 | Dodge | Ram 1500 | SLT |
| 2009-2010 | Dodge | Ram 1500 | Sport |
| 2009-2010 | Dodge | Ram 1500 | ST |
| 2009-2010 | Dodge | Ram 1500 | TRX |
| 2009-2010 | Dodge | Ram 1500 | TRX4 |
| 2007-2008,2010-2014 | Ford | F-150 | FX2 |
| 2004-2014 | Ford | F-150 | FX4 |
| 2006-2008,2010-2012 | Ford | F-150 | Harley-Davidson Edition |
| 2005-2020 | Ford | F-150 | King Ranch |
| 2004-2020 | Ford | F-150 | Lariat |
| 2011 | Ford | F-150 | Lariat Limited |
| 2008,2013-2014,2016-2020 | Ford | F-150 | Limited |
| 2009-2020 | Ford | F-150 | Platinum |
| 2017-2020 | Ford | F-150 | Raptor |
| 2016-2020 | Ford | F-150 | SSV |
| 2004-2014 | Ford | F-150 | STX |
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2008 | Ford | F-150 | THE 60TH ANNIVERSARY EDITION |
| 2004-2020 | Ford | F-150 | XL |
| 2004-2020 | Ford | F-150 | XLT |
| 2011-2022 | Ram | 1500 | Big Horn |
| 2012-2018 | Ram | 1500 | Express |
| 2013-2022 | Ram | 1500 | HFE |
| 2011-2022 | Ram | 1500 | Laramie |
| 2014-2015 | Ram | 1500 | Laramie Limited |
| 2011-2021 | Ram | 1500 | Laramie Longhorn |
| 2015-2022 | Ram | 1500 | Limited |
| 2021-2022 | Ram | 1500 | Limited Longhorn |
| 2014-2022 | Ram | 1500 | Lone Star |
| 2021 | Ram | 1500 | Longhorn |
| 2011-2016 | Ram | 1500 | Outdoorsman |
| 2013 | Ram | 1500 | R/T |
| 2015-2022 | Ram | 1500 | Rebel |
| 2011-2018 | Ram | 1500 | SLT |
| 2014-2018,2020-2021 | Ram | 1500 | Special Service |
| 2011-2018 | Ram | 1500 | Sport |
| 2011-2012 | Ram | 1500 | ST |
| 2011-2022 | Ram | 1500 | Tradesman |
| 2012 | Ram | 1500 | Tradesman HD |
| 2019 | Ram | 1500 Classic | Big Horn |
| 2019-2022 | Ram | 1500 Classic | Express |
| 2019 | Ram | 1500 Classic | Laramie |
| 2019 | Ram | 1500 Classic | Lone Star |
| 2019-2022 | Ram | 1500 Classic | SLT |
| 2019-2022 | Ram | 1500 Classic | Special Service |
| 2019-2022 | Ram | 1500 Classic | Tradesman |
| 2019-2022 | Ram | 1500 Classic | Warlock |
The ICON 198510 multi-rate leaf spring is a direct bolt-in replacement for the factory rear leaf pack on the 2017-2020 Ford F-150 Raptor. It is built to ride slightly softer than stock, then stiffen up when you add weight, so one spring suits a bare truck or a fully loaded build.
Smoother over rough ground. ICON set the base spring rate a little lighter than factory, since the stock rate runs stiff on small, choppy terrain. The result is better ride quality and extra droop travel at the rear axle.
Three spring rates in one kit. An add-in leaf ships with the spring. Swapping it in or adding it to the pack raises the rate by 20% or 40% over the as-shipped setting. On the Raptor, the as-shipped Option 1 gives about +1.00 in. of lift over stock unloaded, Option 2 about +2.25 in. unloaded, and Option 3 about +3.00 in. unloaded, according to ICON. Option 2 holds about +1.00 in. with a 400 lb constant load, and Option 3 holds about +0.50 in. with an 850 lb constant load. That suits spare tires, chase racks, roof-top tents and other added rear weight.
Built to last off-road. A triple military wrap on the front eyelet and a half wrap on the rear eyelet add strength and durability. A rebound leaf helps limit axle wrap, and leaf separators and tip inserts cut noise and friction.
- "ICON 1K" tested under rigorous off-road conditions to validate tune, performance, strength, and durability
- Leaf separators and tip inserts reduce noise and friction while increasing ride comfort
- Triple military wrap front eyelet and rear half wrap for increased durability
- Direct bolt-in to OEM spring location makes for an easy install
- 3 user-adjustable spring rates for unique vehicle setups
- Rebound leaf reduces severe axle wrap
Emissions: Not an emissions-controlled part. Prop 65 warning applies per the supplier listing.
Fitment: ICON lists this leaf spring for the 2017-2020 Ford F-150 Raptor. ICON also approves it on 2021-2026 F-150 XL, XLT, STX, Lariat, King Ranch, Platinum and Tremor models, not the Raptor, when used with ICON 2.5 Aluminum Series rear shocks. Fitment confirmed against ICON's published application information.
Guides & Manuals
Installation InstructionsInstallation Instructions
Installation Instructions
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
The ICON RXT multi-rate leaf pack is a rear leaf spring upgrade built specifically for the 2010-2014 Ford F-150 SVT Raptor. It gives the truck a choice of three spring rates from a single kit, so you can set the rear suspension up for a stock-weight truck or one carrying a chase rack, spare tires and recovery gear. The pack is a direct replacement for the factory rear springs and is designed to work with ICON's full RXT rear suspension system.
Three user-configurable spring rates. The kit includes an add-in leaf that can be left out or added to the pack. According to ICON, the standard configuration gives about 0.75 in. of lift over stock. Adding the leaf for Rate Option #1 (10% over the standard rate) gives about 1.25 in. of lift, and Rate Option #2 (20% over standard) gives about 1.75 in. of lift. ICON also notes that with the 10% option the truck holds its 0.75 in. of lift under a 300 lb constant load, and with the 20% option under a 600 lb load.
Built to resist axle wrap. A rebound leaf was added to reduce the axle wrap that Raptors can show under hard acceleration and braking. ICON found this issue through its own extensive testing.
Durable construction. A triple military wrapped front eyelet and a half wrapped rear eyelet add strength and durability to the spring pack.
Smoother ride and more droop. Tip inserts and leaf separators cut friction between leaves, and OE style bonded rubber bushings stay maintenance free and do not squeak. ICON reduced the spring rate slightly from the original components so the truck rides better and gains droop travel when the full ICON RXT rear system is installed.
Features
- New Ford OE front spring eye bolts included for easy removal and re-installation of springs
- Triple military wrap front eyelet and rear half wrap for increased durability and safety
- Bumpstop extensions included for use when no aftermarket bumpstop kit is installed
- Tip inserts and leaf separators to reduce friction and improve ride comfort
- OE style bonded rubber bushings that are maintenance free and do not squeak
- 3 user-adjustable spring rates for unique setups or added weight
- Rebound leaf reduces severe axle wrap
Fitment: 2010-2014 Ford F-150 SVT Raptor, as named in ICON's product listing for part 198501. Fitment confirmed against ICON Vehicle Dynamics' published product page.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
Hellwig's medium-duty EZ-990 Helper Springs pack a lot of capability in every box. Packaged complete with the same heavy duty powder coated and plated components, hardware and installation instructions as our heavy duty helper spring products, these kits are designed for the vehicles that need lighter assistance in carrying a load. Simple bolt on design using common hand tools provide the installer ease of installation and the vehicle owner hassle free use. Ideally suited for light towing and loads, these units are fully adjustable using the heavy duty U-bolts included in the kit using simple hand tools. If your tow and haul needs change, simply adjust the heavy duty U-bolts to suit the new load requirements. Once installed and adjusted you are free to haul or tow with greater control and stability. Manufactured with heat treated ASTM 5160 alloy spring steel in our California based facility, these units are rated up to 2,000 lb. level load carrying capacity. They are a great cost effective spring solution and can be adjusted independently for uneven side to side loads.
Installation Instructions- Level Load Capacity up to 2000lbs
- Ideal for small trucks and SUV's
- Limited Lifetime Warranty
- Step bracket style leaf
- Easy Installation
- Tunable
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | FX2 |
| 2009-2014 | Ford | F-150 | FX4 |
| 2010-2012 | Ford | F-150 | Harley-Davidson Edition |
| 2009-2014 | Ford | F-150 | King Ranch |
| 2009-2014 | Ford | F-150 | Lariat |
| 2011 | Ford | F-150 | Lariat Limited |
| 2013-2014 | Ford | F-150 | Limited |
| 2009-2014 | Ford | F-150 | Platinum |
| 2009-2014 | Ford | F-150 | STX |
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2009-2014 | Ford | F-150 | XL |
| 2009-2014 | Ford | F-150 | XLT |
Hellwig's medium-duty EZ-990 Helper Springs pack a lot of capability in every box. Packaged complete with the same heavy duty powder coated and plated components, hardware and installation instructions as our heavy duty helper spring products, these kits are designed for the vehicles that need lighter assistance in carrying a load. Simple bolt on design using common hand tools provide the installer ease of installation and the vehicle owner hassle free use. Ideally suited for light towing and loads, these units are fully adjustable using the heavy duty U-bolts included in the kit using simple hand tools. If your tow and haul needs change, simply adjust the heavy duty U-bolts to suit the new load requirements. Once installed and adjusted you are free to haul or tow with greater control and stability. Manufactured with heat treated ASTM 5160 alloy spring steel in our California based facility, these units are rated up to 2,000 lb. level load carrying capacity. They are a great cost effective spring solution and can be adjusted independently for uneven side to side loads.
Installation Instructions- Level Load Capacity up to 2000lbs
- Ideal for small trucks and SUV's
- Limited Lifetime Warranty
- Step bracket style leaf
- Easy Installation
- Tunable
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2022 | Ford | F-150 | King Ranch |
| 2015-2022 | Ford | F-150 | Lariat |
| 2016-2022 | Ford | F-150 | Limited |
| 2015-2022 | Ford | F-150 | Platinum |
| 2018-2022 | Ford | F-150 | Police Responder |
| 2017-2022 | Ford | F-150 | Raptor |
| 2016-2022 | Ford | F-150 | SSV |
| 2021-2022 | Ford | F-150 | Tremor |
| 2015-2022 | Ford | F-150 | XL |
| 2015-2022 | Ford | F-150 | XLT |
For your money, the best aftermarket investment you can make! Hellwig Sway Bars are an extremely effective handling upgrade you can make to your vehicle. Hellwig sway bars offer quick bolt on installation that are engineered to perform. An immediate improvement will be felt when you drive through the first corner with a Hellwig sway bar installed. Though most vehicles come equipped with factory installed sway bars, they are often insufficient for today's load and tow demands. Hellwig sway bars feature larger than stock diameters and precision engineered components to optimize handling and reduce body roll.
Installation Instructions- Increased stiffness for improved handling, comfort and safety
- Everyday drivability and in heavy, tow/haul conditions
- Solid, heat treated chromoly, rear sway bar
- Adjustable Rate Sway Bar
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
For your money, the best aftermarket investment you can make! Hellwig Sway Bars are an extremely effective handling upgrade you can make to your vehicle. Hellwig sway bars offer quick bolt on installation that are engineered to perform. An immediate improvement will be felt when you drive through the first corner with a Hellwig sway bar installed. Though most vehicles come equipped with factory installed sway bars, they are often insufficient for today's load and tow demands. Hellwig sway bars feature larger than stock diameters and precision engineered components to optimize handling and reduce body roll.
Installation Instructions- Increased stiffness for improved handling, comfort and safety
- Everyday drivability and in heavy, tow/haul conditions
- Solid, heat treated chromoly, front sway bar
- Limited Lifetime Warranty
- Reuses Factory End Links
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2024 | Ford | F-150 | King Ranch |
| 2022-2024 | Ford | F-150 | Lariat |
| 2022-2023 | Ford | F-150 | Limited |
| 2022-2024 | Ford | F-150 | Platinum |
| 2022-2024 | Ford | F-150 | Police Responder |
| 2022-2024 | Ford | F-150 | Raptor |
| 2022-2024 | Ford | F-150 | SSV |
| 2024 | Ford | F-150 | STX |
| 2022-2024 | Ford | F-150 | Tremor |
| 2022-2024 | Ford | F-150 | XL |
| 2022-2024 | Ford | F-150 | XLT |
| 2024-2025 | Ford | F-150 Lightning | Flash |
| 2022-2025 | Ford | F-150 Lightning | Lariat |
| 2022-2025 | Ford | F-150 Lightning | Platinum |
| 2022-2025 | Ford | F-150 Lightning | Pro |
| 2023-2025 | Ford | F-150 Lightning | Pro SSV |
| 2022-2025 | Ford | F-150 Lightning | XLT |
For your money, the best aftermarket investment you can make! Hellwig Sway Bars are an extremely effective handling upgrade you can make to your vehicle. Hellwig sway bars offer quick bolt on installation that are engineered to perform. An immediate improvement will be felt when you drive through the first corner with a Hellwig sway bar installed. Though most vehicles come equipped with factory installed sway bars, they are often insufficient for today's load and tow demands. Hellwig sway bars feature larger than stock diameters and precision engineered components to optimize handling and reduce body roll.
Installation Instructions- Increased stiffness for improved handling, comfort and safety
- Everyday drivability and in heavy, tow/haul conditions
- Solid, heat treated chromoly, rear sway bar
- Limited Lifetime Warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | Police Responder |
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
For your money, the best aftermarket investment you can make! Hellwig Sway Bars are an extremely effective handling upgrade you can make to your vehicle. Hellwig sway bars offer quick bolt on installation that are engineered to perform. An immediate improvement will be felt when you drive through the first corner with a Hellwig sway bar installed. Though most vehicles come equipped with factory installed sway bars, they are often insufficient for today's load and tow demands. Hellwig sway bars feature larger than stock diameters and precision engineered components to optimize handling and reduce body roll.
Installation Instructions- Increased stiffness for improved handling, comfort and safety
- Everyday drivability and in heavy, tow/haul conditions
- Solid, heat treated chromoly, front sway bar
- Limited Lifetime Warranty
- Reuses Factory End Links
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | Police Responder |
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.