Welcome to RaptorsOnly.com
-
Brands
Shop by brand
- 3D MAXpider
- Access
- Addictive Desert Designs
- Advan
- AEM Induction
- aFe
- Air Lift
- Airaid
- Alcon
- AlphaRex
- AMP Research
- AMS
- Anderson Composites
- ANZO
- ARB
- Atturo Tire
- AutoMeter
- AVS
- AWE Tuning
- BackRack
- Baer Brakes
- Baja Designs
- BAK
- Banks Power
- BBK
- BBS
- BD Diesel
- Belltech
- Bestop
- BFGoodrich
- BMC
- Body Armor 4x4
- Borla
- Brembo
- Brembo OE
- Bully Dog
- Bushwacker
- Camburg
- Clevite
- COBB
- Cometic Gasket
- COMP Cams
- CORSA Performance
- Covercraft
- CSF
- DBA
- DeatschWerks
- DFC
- Diode Dynamics
- DS18
- DV8 Offroad
- Eaton
- EBC
- Eibach
- Enkei
- Extang
- Fabtech
- Fel-Pro
- fifteen52
- Firestone
- Flowmaster
- Ford Racing
- Forgestar
- FORM Lighting
- FOX
- Garrett
- Gates
- GEN-Y Hitch
- Go Fast Bits
- Go Rhino
- Gram Lights
- Granatelli Motor Sports
- GSC Power Division
- Hawk Performance
- Hella
- Hellwig
- Hotchkis
- Husky Liners
- ICON
- Injen
- J&L
- JBA
- JLT
- K&N Engineering
- KC HiLiTES
- King Engine Bearings
- King Shocks
- Kleinn Air Horns
- Kooks Headers
- KYB
- LIQUI MOLY
- LUND
- Magnaflow
- Mahle OE
- Maxtrac
- Mayhem
- MBRP
- McGard
- Method Wheels
- MGP
- Michelin
- Mickey Thompson
- Mishimoto
- Moog
- Motul
- MTX Wheels
- N-Fab
- Nacho Offroad Technology
- NGK
- Nitrous Express
- Odyssey Battery
- ORACLE Lighting
- PowerStop
- Putco
- QA1
- Raceline
- Radium Engineering
- Rally Armor
- Rampage
- Raxiom
- Retrax
- Rhino-Rack
- Ridetech
- Rigid Industries
- Rival 4x4
- RockJock
- Roll-N-Lock
- Roush
- Royal Purple
- SCT Performance
- Skyjacker
- Snow Performance
- SPC Performance
- SPOD
- Stainless Works
- Superlift
- Superpro
- Timbren
- Torque Solution
- TOYO
- Truxedo
- Tuff Country
- Turbosmart
- UMI Performance
- Undercover
- Volant
- Vossen
- Wagner Tuning
- WeatherTech
- Weld
- Westin
- Whiteline
- Wilwood
- Yokohama Tire
- Yukon Gear & Axle
- Zone Offroad
No brands found. Try another name or initial.
156 brands
View all brands -
F-150 Raptor
- F-150 Raptor
-
1st Gen (2010-2014)
-
2nd Gen (2017-2020)
-
3rd Gen (2021-Present)
-
Raptor R (2023-Present)
-
Bronco Raptor
- Bronco Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
-
Ranger Raptor
- Ranger Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
Your cart
Subheading
Product comparison
Describe you product comparison grid
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
8 products
8 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Camburg's Performance Series upper control arm kit is built for the 2010-2014 Ford F-150 SVT Raptor. When the truck is lifted, the stock upper arms limit suspension performance. These arms replace the factory ball joint with a larger uniball bearing so the suspension can gain wheel travel and tolerate more misalignment, using arms that are considerably stronger than the factory parts.
Uniball in place of the ball joint. Camburg uses a 1.25 in. FK uniball bearing, made in the USA, with a military grade PTFE internal liner. It replaces the weak factory ball joint and allows a higher angle of misalignment, which is what lets the suspension travel further.
Precision fit, no drilling. The uniball is machined in-house and adapted to the spindle and knuckle with model-specific spacers made from heat-treated stainless steel. Camburg says this gives a precise fit without drilling or modifying the truck.
Fabricated tube arms. The tubes are CNC laser cut and bent, then MIG welded in precision fixtures. After welding, the arms are sandblasted and powder coated. Camburg makes the arms under its own roof and controls the process from start to finish.
Installation. The kit comes with step-by-step instructions and the hardware needed for installation. Camburg's application list notes that the arms may be used with most aftermarket coilovers, and that with 17 in. OEM wheels a 0.25 in. spacer may be required for tires larger than 37 in.
Features
- 1.25 in. FK uniball with PTFE liner, made in the USA
- Corrects suspension geometry for improved handling
- Designed for maximum wheel travel and articulation
- Replaces the weak factory ball joints
- Model-specific stainless steel spacers for a no-drill fit
- CNC laser cut and bent tubes, MIG welded, sandblasted and powder coated
- Hardware and step-by-step instructions included
Fitment: Camburg lists this kit for the 2010-2014 Ford F-150 SVT Raptor. Fitment confirmed against Camburg's published application list.
Guides & Manuals
Installation GuideThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
Camburg's KINETIK Series upper control arm kit is built for the 2017-2020 Ford F-150 Raptor. The CNC-machined billet arms increase wheel travel and articulation, and Camburg designed them to correct suspension geometry with added caster for better on-road and off-road handling. This kit is the gray anodized version and comes as a pair of arms with the X-Joint XL ball joints.
Billet construction. Each arm is CNC machined in-house from 6061-T6 billet aluminum, Type II anodized gray and laser etched. Camburg describes the arms as higher quality and higher strength than the factory parts for off-road use.
X-Joint XL ball joints. The arms use Camburg's larger X-Joint XL, a sealed, greaseable high-angle ball joint that Camburg says tolerates high misalignment for maximum wheel travel. The joint uses heat-treated chromoly parts and an improved boot design that allows higher angles, easier greasing and longer life, and it is sealed against dirt, sand, rain, mud and snow.
Adjustable camber and caster. The arms are adjustable and use FK 7/8 in. chromoly heim joints. Camburg says these resist flex and deflection under hard use and heavy braking without binding.
Installation. This is a bolt-on upgrade. Camburg supplies step-by-step instructions, notes that basic automotive knowledge is needed, and recommends professional installation.
Features
- 6061-T6 billet aluminum arms, CNC machined, Type II anodized gray
- Camburg X-Joint XL sealed, greaseable ball joints, press-in mounting
- FK 7/8 in. chromoly heim joints for camber and caster adjustment
- Increased caster to correct geometry and improve handling
- Reinforced construction for increased wheel travel and articulation
- Replaces the factory upper arms and their weak ball joints
What's in the kit: 4 heim joints, 8 heim spacers, 2 X-Joint cover caps, 4 cover cap O-rings, 2 grease zerk fittings, 4 Allen bolts, 4 steel jam nuts, 4 flanged nuts, 2 castle nuts, 2 cotter pins, 2 M12 washers, 8 washers and 1 length of fishing line.
Fitment: Camburg lists this kit for the 2017-2020 Ford F-150 Raptor. Fitment confirmed against Camburg's published application list.
Guides & Manuals
Installation GuideThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
$134.00
This is Camburg's replacement uniball kit for rebuilding the 1.25 inch uniball joints in Camburg upper control arms and some of its lower arms. Each kit is sold as a pair: two FK 1.25 uniball bearings and two snap rings. Camburg lists it for the Ford F-150 SVT Raptor (2010-2014) and F-150 Raptor (2017-2024).
A rebuild instead of a new arm. When the joints in a Camburg arm wear out, this kit lets you refit fresh bearings instead of replacing the whole assembly.
Built for load and low friction. The bearings are made in the USA and use an internal self-lubricating PTFE liner, which Camburg says reduces stiction and noise. They carry a 100,730 lb. load rating, which Camburg positions as far stronger than OEM-style ball joints and smaller uniball bearings. The bearing ID is 1.25 in. with the misalignment spacers removed, and the bearing OD is 2.375 in.
Confirm the size before you order. Some older Camburg upper arms use a smaller 1.00 in. uniball. The easy check is the bolt: a hex-head bolt sitting above the uniball means a 1 in. uniball, while the 1.25 in. joint has the bolt recessed below. Camburg's instructions walk through the swap step by step.
Features
- Two FK 1.25 uniball bearings and two snap rings per kit (sold as a pair)
- 100,730 lb. load rating
- Self-lubricating PTFE liner for lower stiction and noise
- Bearing ID 1.25 in. (spacers removed), bearing OD 2.375 in.
- Steel construction, natural finish, performance grade
- Made in the USA
Fitment: Camburg lists this kit for the 2010-2014 F-150 SVT Raptor and the 2017-2024 F-150 Raptor, inside a broad F-150 application list that also covers many other trucks and SUVs; it is a replacement part for the 1.25 in. uniballs in Camburg arms. Fitment confirmed against Camburg's published application list.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2017-2024 | Ford | F-150 | Raptor |
$585.00
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2026 | Ford | F-150 | King Ranch |
| 2015-2026 | Ford | F-150 | Lariat |
| 2016-2023 | Ford | F-150 | Limited |
| 2015-2026 | Ford | F-150 | Platinum |
| 2018-2026 | Ford | F-150 | Police Responder |
| 2017-2026 | Ford | F-150 | Raptor |
| 2016-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2015-2026 | Ford | F-150 | XL |
| 2015-2026 | Ford | F-150 | XLT |
The Camburg KINETIK V2 Performance Billet Uniball Upper Arms (Red) replace the factory upper control arms on the front suspension of the Ford F-150 Raptor and F-150 Raptor R. They are built for owners who drive their trucks hard and want more wheel travel, better geometry and a stronger joint than the stock ball joint offers.
More travel and articulation. The arms are designed to let the front wheels move through a greater range on the trail, so the suspension can use the travel you have paid for.
Corrected geometry with added caster. Camburg designed the arms to restore suspension geometry and add caster, which improves handling both off-road and on the street.
Machined from billet aluminum. Each arm is CNC machined in-house from 6061 aerospace-grade billet aluminum, Type II anodized and laser etched. Camburg describes them as considerably stronger and better made than the original parts for off-road use.
A larger uniball in place of the factory ball joint. The kit uses an FK 1.25 inch uniball with a PTFE liner for strength, long life and extra misalignment. It is adapted to the spindle with model-specific heat-treated stainless steel spacers, so no drilling or modification is needed. The larger joint accepts a stronger 12-point bolt and a low-profile press-on cap that keeps dirt and water out.
Adjustable camber and caster. Larger FK 7/8 inch chromoly heim joints allow additional camber and caster adjustment, and they resist flex under hard use and heavy braking without binding.
Install with the included hardware. Step-by-step instructions and the necessary hardware come with the kit. Camburg says the arms work with most aftermarket coilovers and with factory 35 inch to 37 inch wheels and tires.
Features
- CNC machined 6061 billet aluminum, Type II anodized, laser etched
- FK 1.25 inch uniball with PTFE liner
- Model-specific heat-treated stainless steel spacers, no drilling required
- 12-point bolt and low-profile press-on uniball cap
- FK 7/8 inch chromoly heim joints for added camber and caster adjustment
- Corrected geometry with increased caster
- Instructions and hardware included
Fitment: Camburg lists this kit for the 2017-2026 F-150 and states that it fits Raptor and Raptor R models. It may be used with most aftermarket coilovers and with factory 35 inch to 37 inch wheels and tires. Fitment confirmed against Camburg's published application list.
Guides & Manuals
Installation InstructionsInstallation Guide (Red)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
The Camburg KINETIK V2 Performance Billet Uniball Upper Arms (Gray) replace the factory upper control arms on the front suspension of the Ford F-150 Raptor and F-150 Raptor R. They are built for owners who drive their trucks hard and want more wheel travel, better geometry and a stronger joint than the stock ball joint offers.
More travel and articulation. The arms are designed to let the front wheels move through a greater range on the trail, so the suspension can use the travel you have paid for.
Corrected geometry with added caster. Camburg designed the arms to restore suspension geometry and add caster, which improves handling both off-road and on the street.
Machined from billet aluminum. Each arm is CNC machined in-house from 6061 aerospace-grade billet aluminum, Type II anodized and laser etched. Camburg describes them as considerably stronger and better made than the original parts for off-road use.
A larger uniball in place of the factory ball joint. The kit uses an FK 1.25 inch uniball with a PTFE liner for strength, long life and extra misalignment. It is adapted to the spindle with model-specific heat-treated stainless steel spacers, so no drilling or modification is needed. The larger joint accepts a stronger 12-point bolt and a low-profile press-on cap that keeps dirt and water out.
Adjustable camber and caster. Larger FK 7/8 inch chromoly heim joints allow additional camber and caster adjustment, and they resist flex under hard use and heavy braking without binding.
Install with the included hardware. Step-by-step instructions and the necessary hardware come with the kit. Camburg says the arms work with most aftermarket coilovers and with factory 35 inch to 37 inch wheels and tires.
Features
- CNC machined 6061 billet aluminum, Type II anodized, laser etched
- FK 1.25 inch uniball with PTFE liner
- Model-specific heat-treated stainless steel spacers, no drilling required
- 12-point bolt and low-profile press-on uniball cap
- FK 7/8 inch chromoly heim joints for added camber and caster adjustment
- Corrected geometry with increased caster
- Instructions and hardware included
Fitment: Camburg lists this kit for the 2017-2026 F-150 and states that it fits Raptor and Raptor R models. It may be used with most aftermarket coilovers and with factory 35 inch to 37 inch wheels and tires. Fitment confirmed against Camburg's published application list.
Guides & Manuals
Installation InstructionsInstallation Guide (Gray)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$10,194.90
The Camburg FOX 3.0 Live Valve KINETIK Series Performance Kit is a complete front and rear suspension upgrade built for the 2019-2020 Ford F-150 Raptor. It pairs Camburg's billet KINETIK uniball upper arms with FOX 3.0 Live Valve internal bypass coilovers up front and matching FOX 3.0 Live Valve bypass shocks in the rear, so the whole truck gains more travel, better control and corrected front-end geometry in one purchase.
Upper arms that fix what a lift breaks. Once a Raptor is lifted, the factory upper arms limit how far the suspension can move. Camburg's KINETIK arms replace them with a much stronger billet design that removes the weak factory upper ball joint and uses uniball joints instead. The arms add caster and reshape the camber curve, so the truck aligns correctly and drives better on pavement and off-road.
FOX 3.0 Live Valve coilovers up front. The front coilovers are FOX 3.0 series Live Valve internal bypass units with external reservoirs. The larger-diameter bodies and added oil capacity improve ride and handling on the street and give you more control over big hits off-road. Combined with the upper arms, they increase front wheel travel. The kit gives a 0 to 2 inch front lift.
FOX 3.0 Live Valve shocks out back. The rear pair are FOX 3.0 Live Valve internal bypass shocks with substantially more oil capacity than stock. They are longer, which adds rear wheel travel and articulation, and the bypass design gives far more bottoming control when the landings get hard.
Wheel and tire note. With the factory 17 inch wheel, or any positive-offset wheel, you may need a 1/4 inch to 3/8 inch wheel spacer when running tires 37 inches or wider. Camburg recommends a zero-offset wheel, and lists 4.75 to 5 inches of backspacing for 35 to 37 inch tires. The 2019 and newer trucks use Live Valve electronic suspension, so the suspension position sensor must be moved to the new bracket during installation.
What is in the kit
- Two Camburg KINETIK billet uniball upper arms (CAM-110233-GRY)
- Two FOX 3.0 Live Valve front coilovers with external reservoirs (FOX 883-09-153)
- Two FOX 3.0 Live Valve rear bypass shocks (FOX 883-06-153)
Features
- Corrected suspension geometry with added caster and a revised camber curve
- Replaces the weak factory upper ball joint with uniball joints
- Increased front and rear wheel travel and articulation
- 0 to 2 inch front lift
- FOX 3.0 Live Valve internal bypass shocks front and rear
- Improved ride and handling on and off-road
- Made in the USA
Fitment: Camburg lists this kit for the 2019-2020 Ford F-150 Raptor, front and rear. Fitment confirmed against Camburg's published application list.
Guides & Manuals
KINETIK Billet Uniball Upper Arm Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2020 | Ford | F-150 | Raptor |
$126.00
The Camburg 1.00 Uniball Replacement Kit is the rebuild kit for the uniball joints in Camburg's suspension arms, spindles and lower arm inner pivots. Each pair includes two FK 1.00 inch uniball bearings and two snap rings, so a worn joint can be renewed without replacing the whole arm. On the Ford F-150 Raptor and Raptor R it is the service part for Camburg's Raptor suspension kits.
Built to outlast stock ball joints. Camburg describes these bearings as American-made and heat-treated for strength. A load rating above 90,000 lb. puts them well beyond OEM-style ball joints and the smaller, cheaper uniball bearings found on many aftermarket arms.
Smooth, quiet movement. Each bearing has a self-lubricating, military-grade PTFE liner inside, which cuts stiction and noise as the suspension cycles. The bearing bore is 1.00 inch with the misalignment spacers removed, and the outside diameter is 2.125 inches.
Match it to your Camburg kit. Camburg's application list pairs this kit with specific Raptor suspension parts. On the 2017-2020 F-150 Raptor, use it with CAM-110229 or CAM-110176-K-GRY/RED/BLU/GLD. On the 2021-2026 F-150 Raptor and 2023-2026 Raptor R, Camburg lists it with CAM-110249. Camburg's page also lists it for many other trucks and SUVs, so confirm the arm or spindle you are rebuilding before ordering.
Features
- Two FK 1.00 inch uniball bearings and two snap rings per kit
- Heat-treated, American-made bearings
- Self-lubricating PTFE liner for reduced stiction and noise
- Load rating above 90,000 lb.
- 1.00 inch bore (misalignment spacers removed), 2.125 inch outside diameter
- Fits Camburg upper arms, spindles and lower arm inner pivots
Fitment: Camburg lists this kit for the 2017-2026 Ford F-150 Raptor, and its 2023-2026 Raptor listing is marked as fitting Raptor and Raptor R models. The Raptor rows are shown below. Fitment confirmed against Camburg's published application list.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.