Welcome to RaptorsOnly.com
-
Brands
Shop by brand
- 3D MAXpider
- Access
- Addictive Desert Designs
- Advan
- AEM Induction
- aFe
- Air Lift
- Airaid
- Alcon
- AlphaRex
- AMP Research
- AMS
- Anderson Composites
- ANZO
- ARB
- Atturo Tire
- AutoMeter
- AVS
- AWE Tuning
- BackRack
- Baer Brakes
- Baja Designs
- BAK
- Banks Power
- BBK
- BBS
- BD Diesel
- Belltech
- Bestop
- BFGoodrich
- BMC
- Body Armor 4x4
- Borla
- Brembo
- Brembo OE
- Bully Dog
- Bushwacker
- Camburg
- Clevite
- COBB
- Cometic Gasket
- COMP Cams
- CORSA Performance
- Covercraft
- CSF
- DBA
- DeatschWerks
- DFC
- Diode Dynamics
- DS18
- DV8 Offroad
- Eaton
- EBC
- Eibach
- Enkei
- Extang
- Fabtech
- Fel-Pro
- fifteen52
- Firestone
- Flowmaster
- Ford Racing
- Forgestar
- FORM Lighting
- FOX
- Garrett
- Gates
- GEN-Y Hitch
- Go Fast Bits
- Go Rhino
- Gram Lights
- Granatelli Motor Sports
- GSC Power Division
- Hawk Performance
- Hella
- Hellwig
- Hotchkis
- Husky Liners
- ICON
- Injen
- J&L
- JBA
- JLT
- K&N Engineering
- KC HiLiTES
- King Engine Bearings
- King Shocks
- Kleinn Air Horns
- Kooks Headers
- KYB
- LIQUI MOLY
- LUND
- Magnaflow
- Mahle OE
- Maxtrac
- Mayhem
- MBRP
- McGard
- Method Wheels
- MGP
- Michelin
- Mickey Thompson
- Mishimoto
- Moog
- Motul
- MTX Wheels
- N-Fab
- Nacho Offroad Technology
- NGK
- Nitrous Express
- Odyssey Battery
- ORACLE Lighting
- PowerStop
- Putco
- QA1
- Raceline
- Radium Engineering
- Rally Armor
- Rampage
- Raxiom
- Retrax
- Rhino-Rack
- Ridetech
- Rigid Industries
- Rival 4x4
- RockJock
- Roll-N-Lock
- Roush
- Royal Purple
- SCT Performance
- Skyjacker
- Snow Performance
- SPC Performance
- SPOD
- Stainless Works
- Superlift
- Superpro
- Timbren
- Torque Solution
- TOYO
- Truxedo
- Tuff Country
- Turbosmart
- UMI Performance
- Undercover
- Volant
- Vossen
- Wagner Tuning
- WeatherTech
- Weld
- Westin
- Whiteline
- Wilwood
- Yokohama Tire
- Yukon Gear & Axle
- Zone Offroad
No brands found. Try another name or initial.
156 brands
View all brands -
F-150 Raptor
- F-150 Raptor
-
1st Gen (2010-2014)
-
2nd Gen (2017-2020)
-
3rd Gen (2021-Present)
-
Raptor R (2023-Present)
-
Bronco Raptor
- Bronco Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
-
Ranger Raptor
- Ranger Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
Your cart
Subheading
Product comparison
Describe you product comparison grid
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
21 products
21 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
These Eibach Pro-Lift-Kit rear springs raise the back of a third-generation Ford F-150 Raptor without coilovers or spacers. The set of two coil springs replaces the factory rear springs, adds ride height and tire clearance, and works with the truck's factory FOX electronic shocks.
Lift without extra stress. Because the kit swaps the springs themselves, the rear axle keeps its full range of suspension travel. The Pro-Lift-Kit is built to keep the stock upper mounts and control arms, so the suspension geometry stays close to what Ford designed.
Made for the Raptor's electronic shocks. Eibach states the springs are designed to be used with the original FOX electronic shocks, so you do not need to replace your dampers to install them.
Room for bigger tires. The added height gives more fender clearance for larger wheels and tires, and more ground clearance on trails. Eibach lists these springs for Raptors running either 35 in or 37 in tires.
Built in the USA. Eibach makes the springs in the United States using technology from its off-road race program, and backs them with a five-year warranty against defects in materials and workmanship (coatings excluded).
Features
- Set of 2 rear coil springs
- Increased ground clearance
- More fender clearance for larger wheels and tires
- Designed to use the factory FOX electronic shocks
- Retains the stock upper mounts and control arms
- Made in the U.S.A. with a five-year warranty
Warning: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. See www.P65Warnings.ca.gov.
Fitment: 2021-2026 Ford F-150 Raptor (3.5L EcoBoost, 4WD, 35 in or 37 in) and 2023-2026 Ford F-150 Raptor R (5.2L supercharged, 4WD). Fitment confirmed against Eibach's published application list. Eibach does not guarantee fitment on applications it does not list.
Guides & Manuals
Installation InstructionsWarranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$279.99
Established in 1975, Superlift remains a pioneer in the industry, and is one of the few suspension companies operated by true truck and off-road enthusiasts. We are passionate about trucks, wheeling and an outdoor lifestyle that go hand-in-hand. We can talk the talk because we walk the walk.This question.... ''What's best for the customer?''... is always at the top of our list in everything we do, from product planning and design to customer service. This simple guiding principal has served us well for decades, and will continue to guide us into the future.We are proud to provide the truck, Jeep and SUV owner products that perform better than advertised. We understand that most people spend the majority of their windshield time on-road, and our designs reflect this. You will be 100% satisfied with our products on-road or off - we guarantee it! Determining what product is right for your vehicle and lifestyle can be a complicated task, especially with so many companies and options to choose from. We urge you to carefully research your purchase. Most lift kits represent a considerable investment, and you will literally live with your choice for years. Talk to fellow off-roaders, and your local automotive specialty shop before making a purchase. We love to talk shop, and we encourage you to give our tech staff a call. Bottom line... if you do your homework, you'll discover that we've done ours.
Installation Instructions- Bilstein Shock Box - 4.5-6 inch Lift Kit
- Bilstein 5100 Series Shock Absorber
- Bilstein 5100 Series Shocks
- Shock Warranty - 1 Year
- 2 Shocks
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | FX2 |
| 2004-2014 | Ford | F-150 | FX4 |
| 2006-2008,2010-2012 | Ford | F-150 | Harley-Davidson Edition |
| 2005-2024 | Ford | F-150 | King Ranch |
| 2004-2024 | Ford | F-150 | Lariat |
| 2011 | Ford | F-150 | Lariat Limited |
| 2013-2014,2016-2023 | Ford | F-150 | Limited |
| 2009-2024 | Ford | F-150 | Platinum |
| 2018-2024 | Ford | F-150 | Police Responder |
| 2017-2024 | Ford | F-150 | Raptor |
| 2016-2024 | Ford | F-150 | SSV |
| 2004-2014,2024 | Ford | F-150 | STX |
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2008 | Ford | F-150 | THE 60TH ANNIVERSARY EDITION |
| 2021-2024 | Ford | F-150 | Tremor |
| 2004-2024 | Ford | F-150 | XL |
| 2004-2024 | Ford | F-150 | XLT |
$159.99
Building off the impressive design and capability of the new Ford Bronco with its on the 4-corner coilover design, the team at Zone Offroad are offering a 2" lift solution designed for the Badlands trim and Sasquatch-equipped 20201 Ford Broncos. These new 2" lift kits are lift and level the stance eliminating the factory nose-low rake and allowing clearance for up to 35" tires. This new kit is designed to take advantage of the impressive travel on the new Bronco utilizing top mounted strut spacers to raise the stance without sacrificing ride quality or overall driveability. The spacers are built from heavy duty semi-aromatic glass-fiber reinforced nylon resin design, offering strength and a clean OE appearance once installed. Additionally supplied for the front a set of spring perch spacers to level out the front stance as well as bump stops extensions which allow you to get the lift without overextending the suspension-steering/driveline operating angles allowing for extreme use. Rounding out the kit is replacement hardware along with step-by-step instructions allowing you to bolt-on this 2" lift kit within a few hours. Optional Adventure Pro Series Upper Control Arms are available for additional strength and performance. Give your Bronco a boost with Zone Offroad.
Installation Instructions- Top-mount design along with spring perch spacer and bump stop extension to provide lift, while maintaining ride quality
- Lifts and levels stance without affecting ride quality or drivability
- Designed to work within the operating limits of the factory UCA
- Allows clearance for larger 35" tire/wheel/tire packages
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | Bronco | Badlands |
| 2021-2023,2025 | Ford | Bronco | Base |
| 2021-2025 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2025 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2025 | Ford | Bronco | Outer Banks |
| 2022-2025 | Ford | Bronco | Raptor |
| 2025 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.
- Simplified Design With Fast Install
- Steering Knuckles Retain Proper ESC
- No Loss Of Ground Clearance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | Bronco | Badlands |
| 2021-2023 | Ford | Bronco | Base |
| 2021-2026 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2024 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2026 | Ford | Bronco | Outer Banks |
| 2022-2024 | Ford | Bronco | Raptor |
| 2021-2024 | Ford | Bronco | Wildtrak |
Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.
- The Kits Are Made From The Highest Quality Materials
- Guarantee Superior Performance And Functionality
- Other Parts Required For A Complete Set
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2013 | Ford | F-150 | FX2 |
| 2009-2013 | Ford | F-150 | FX4 |
| 2010-2012 | Ford | F-150 | Harley-Davidson Edition |
| 2009-2013 | Ford | F-150 | King Ranch |
| 2009-2013 | Ford | F-150 | Lariat |
| 2011 | Ford | F-150 | Lariat Limited |
| 2013 | Ford | F-150 | Limited |
| 2009-2013 | Ford | F-150 | Platinum |
| 2009-2013 | Ford | F-150 | STX |
| 2010-2013 | Ford | F-150 | SVT Raptor |
| 2009-2013 | Ford | F-150 | XL |
| 2009-2013 | Ford | F-150 | XLT |
Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.
- The Kits Are Made From The Highest Quality Materials
- Guarantee Superior Performance And Functionality
- Other Parts Required For A Complete Set
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2013 | Ford | F-150 | FX2 |
| 2009-2013 | Ford | F-150 | FX4 |
| 2010-2012 | Ford | F-150 | Harley-Davidson Edition |
| 2009-2013 | Ford | F-150 | King Ranch |
| 2009-2013 | Ford | F-150 | Lariat |
| 2011 | Ford | F-150 | Lariat Limited |
| 2013 | Ford | F-150 | Limited |
| 2009-2013 | Ford | F-150 | Platinum |
| 2009-2013 | Ford | F-150 | STX |
| 2010-2013 | Ford | F-150 | SVT Raptor |
| 2009-2013 | Ford | F-150 | XL |
| 2009-2013 | Ford | F-150 | XLT |
If you want a taller, more level front end on your 2024-2025 Ford Ranger Raptor without replacing the factory shocks, this ICON 2.25 inch front coilover spacer kit is a simple way to get there. It bolts in with the original coilover assemblies and adds 2.25 inches of front lift over stock.
Keeps the factory electronic shocks working. ICON designed these spacers to maintain full functionality of the stock electronic shock system, so you keep the Ranger Raptor's original damping behavior while raising the front.
Room for bigger wheels and tires. The added height helps keep oversized tires clear of the front fenders and gives the truck a more aggressive, level stance.
Protects the front suspension. ICON states the kit avoids overextending the stock front upper control arm ball joints and prevents over-cycling of the CV joints as the suspension approaches full extension.
Built from billet aluminum. The spacers are CNC machined from 6061 billet aluminum with a black anodized finish for corrosion resistance, and are covered by ICON's Limited Lifetime Warranty.
Features
- Vehicle specific design for Ford Ranger Raptor equipped with OE front coilovers
- No ball joint over extension or bind with full factory wheel travel
- Increases front ground clearance and provides more level stance
- Maintains functionality of factory electronic shock system
- Keeps oversized tires from interfering with front fenders
- Black anodized finish for excellent corrosion resistance
- Raises front ride height 2.25" over stock
- CNC machined 6061 aluminum components
Fitment: ICON lists this kit for the 2024-2025 Ford Ranger Raptor equipped with the original front coilovers. Fitment confirmed against ICON's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2025 | Ford | Ranger | Raptor |
The ICON 1.5-inch Rear Bump Stop Spacer Kit is built for 2017-2020 Ford F-150 Raptors that run ICON Multi-Rate Leaf Springs. It drops the factory rear bump stops 1.5 inches so the stock stops sit where they should once the springs are changed.
Keeps correct suspension travel. ICON says the spacers reposition the stock bump stops to maintain proper travel and let you keep using the OE bump stops without over-cycling the ICON leaf springs. This kit is for trucks running the ICON Multi-Rate Leaf Springs, as ICON specifies.
Machined from 6061 aluminum. Each spacer is precision CNC machined from high-strength 6061 aluminum, so it is durable and adds very little weight to the rear of the truck.
Bolt-on installation. The design is a straightforward bolt-on, and the mounting hardware is included in the kit, as the photo shows: two spacers and two bolts.
Features
- Lowers the factory rear bump stops 1.5"
- Lets the stock rear bump stops be used with ICON Multi-Rate Leaf Springs
- Precision CNC machined from 6061 aluminum
- Mounting hardware included
- Simple bolt-on installation
Fitment: ICON's product page title for this part says 2010-2014, but ICON's description specifies 2017-2020 Ford F-150 Raptor models equipped with ICON Multi-Rate Leaf Springs, and ICON lists a separate part for the 2010-2014 Raptor. We used the 2017-2020 application from ICON's description. Fitment confirmed against ICON's published product description.
Guides & Manuals
Installation InstructionsInstallation Instructions
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
This ICON rear bump stop spacer kit (part 95221) is built for the 2010-2014 Ford F-150 SVT Raptor that runs ICON Multi-Rate Leaf Springs. It drops the factory rear bump stops by 2.75 inches so the stock stops keep working as intended after the spring swap.
Keeps the factory bump stops useful. ICON's leaf springs change how the rear axle travels. These spacers move the OE bump stops down into the right spot, so you can keep using them without the springs cycling past their intended range.
Protects suspension travel. With the stops repositioned, the rear suspension keeps its correct travel and gets a defined stopping point at full compression, on the road and off it.
Machined from 6061 aluminum. Each spacer is CNC machined from high-strength 6061 aluminum, which gives you durability with very little added weight.
Straightforward bolt-on install. The kit includes the mounting hardware, and ICON lists it as a simple bolt-on job.
Features
- Lets the stock rear bump stops be used with ICON Multi-Rate Leaf Springs
- Lowers the rear bump stops 2.75"
- CNC machined from 6061 aluminum
- Mounting hardware included
- Simple bolt-on installation
Fitment: ICON lists this kit for 2010-2014 Ford F-150 SVT Raptor models fitted with ICON Multi-Rate Leaf Springs. Fitment confirmed against ICON Vehicle Dynamics' published product page.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
These Eibach Pro-Lift-Kit rear springs raise the back of a 2024-2026 Ford Ranger Raptor to give you more ground clearance and more room in the wheel wells for larger tires. The kit is a set of two rear coil springs, part number E30-35-066-03-02, built to work with the truck's stock components rather than replace them.
Added ride height without a full suspension swap. Eibach designs the springs with off-road race know-how so the rear sits higher while the factory mounting points stay in use. Nothing else in the rear suspension has to be replaced to run them.
Made to work with the factory FOX shocks. Eibach states these springs are designed to be used with the OE FOX electronic shocks, so the Raptor's adjustable damping stays in play after the lift.
Room for bigger tires. The extra rear height opens up fender clearance, which helps when you move to a taller or wider tire for trail use.
Built in the USA. Eibach makes these springs in the United States and backs them with a five-year warranty against defects in materials and workmanship, excluding coatings, under normal use.
Features
- Set of 2 rear coil springs
- Increases rear ground clearance
- Adds fender clearance for larger wheels and tires
- Designed for use with the OE FOX electronic shocks
- Made in the USA
- Five-year warranty
Fitment: 2024-2026 Ford Ranger Raptor Double Cab with the 3.0L twin-turbocharged V6, 4X4. Eibach does not guarantee fitment, height or warranty on applications it does not list. Fitment confirmed against Eibach's published application list.
Emissions: Eibach lists no CARB EO number for this part. California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm (www.P65Warnings.ca.gov).
Guides & Manuals
Installation InstructionsWarranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor Double Cab 3.0L 4X4 |
These Eibach Pro-Lift-Kit HD rear springs are a pair of heavy-duty coil springs made for the 2024-2026 Ford Ranger Raptor Double Cab with the 3.0L twin-turbo V6 and 4x4. They raise the rear of the truck and add extra spring rate so it holds its height when you load it with cargo and gear.
Built for a loaded Ranger Raptor. Eibach designed this HD spring to restore ride height after you add weight such as bumpers, racks, camping gear or cargo. The listed rear lift heights run from 0 lb to 500 lb of added load, and Eibach recommends running the springs only at fully loaded height, with the other heights shown for reference.
Made to work with the factory shocks. The kit is designed to use the original FOX electronic shocks, so there is no shock swap to plan around. Eibach cautions that too much lift will hurt ride quality, so choose the load rating that matches how you use the truck.
Pairs with Eibach's Pro-Lift-Kit and Pro-Truck-Lift. Eibach's design notes say the HD rear springs are compatible with vehicles already fitted with its Pro-Lift-Kit or Pro-Truck-Lift springs.
Made in the USA and warranted. The springs are built in the U.S.A. and carry Eibach's five-year warranty against factory defects in material and workmanship (coatings excluded) for passenger cars and light-duty class 1-3 trucks under normal use.
Features
- Set of 2 rear coil springs
- Increased ground clearance
- More fender clearance for larger wheels and tires
- Improved off-road capability with stable on-road handling
- Designed for the factory FOX electronic shocks
- Made in the U.S.A.; five-year warranty
Emissions: This is a suspension part and has no emissions certification. Prop 65 warning applies.
Fitment: 2024-2026 Ford Ranger Raptor Double Cab, 3.0L twin-turbo V6, 4x4. Fitment confirmed against Eibach's published application list. Eibach does not guarantee fitment, height or warranty on unlisted applications.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The Eibach Pro-Lift-Kit front springs raise the front of a 2024-2026 Ford Ranger Raptor Double Cab (3.0L twin-turbo, 4x4) by swapping the factory coil springs for taller, performance-tuned Eibach springs. The kit is a set of two front springs, sold under Eibach part number E30-35-066-01-20.
A lift that keeps the factory hardware. Rather than adding spacers or replacing the shocks, this kit changes only the springs. The factory upper mounts and control arms stay in place, so the suspension keeps its full range of travel without extra stress on bushings and ball joints.
Built for the Raptor's electronic shocks. Eibach states the kit is designed to work with the factory FOX electronic shocks, so you can keep the stock damping hardware you already have.
More room for bigger tires. The added ride height opens up fender clearance for larger wheels and tires and gives you more ground clearance on the trail, while the springs are engineered to hold on-road stability and a comfortable ride.
Made in the USA and backed for five years. Eibach manufactures these springs in the U.S.A. and covers them with its five-year warranty against defects in materials and workmanship.
Features
- Set of 2 front coil springs
- Designed to be used with the factory FOX electronic shocks
- Increases ground clearance
- Adds fender clearance for larger wheels and tires
- Keeps on-road stability and handling
- Made in the U.S.A.
- Five-year warranty
Emissions: This part is a suspension component. California Prop 65 warning: Cancer and Reproductive Harm.
Fitment: Eibach lists this kit for the 2024-2026 Ford Ranger Raptor Double Cab with the 3.0L twin-turbo V6 and 4x4. Fitment confirmed against Eibach's published application list. Eibach does not guarantee fitment, height or warranty on unlisted applications.
Guides & Manuals
Installation InstructionsWarranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
The Eibach Pro-Lift-Kit for the 2022-2026 Ford Bronco Raptor is a set of four replacement coil springs, two front and two rear, that raise the stance of the truck without adding spacers or changing the suspension geometry. It is built to work with the Bronco Raptor's factory FOX electronic shocks, so you keep the stock damper hardware and electronic control.
More lift, same hardware. The springs swap in for the factory springs and keep the stock upper mounts and control arms. That gives you extra ground clearance and a taller ride height while the suspension keeps its full range of travel.
Room for bigger tires. The added ride height opens up space in the wheel wells, which helps when you step up to larger wheels and tires on a trail-ready build.
Everyday manners. Eibach designs these springs with off-road race experience in mind, aiming for solid on-road stability and handling so the truck still drives well between trailheads.
Made in the USA. The kit is manufactured in the U.S.A. and carries Eibach's five-year warranty against defects in material and workmanship.
Features
- Set of 4 springs: front and rear
- Designed to use the factory FOX electronic shocks
- Increased ground clearance
- More fender clearance for larger wheels and tires
- Keeps stock upper mounts and control arms
- Made in U.S.A. with a five-year warranty
Emissions and warnings: This is a chassis part with no emissions function. California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm (www.P65Warnings.ca.gov).
Fitment: Fits the 2022-2026 Ford Bronco Raptor with the 3.0L engine. Eibach notes the kit is designed for the factory FOX electronic shocks, and does not guarantee fitment, height or warranty on unlisted applications. Fitment confirmed against Eibach's published application list.
Guides & Manuals
Installation InstructionsWarranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Ford | Bronco | Raptor |
These Eibach Pro-Lift-Kit front springs raise the front of a 2022-2026 Ford Bronco Raptor about 2.6 inches by replacing the factory coil springs. The lift comes from the springs alone, so there is no spacer stack and no new upper mounts to install. The set contains two springs and lifts the front end only; the rear is left at stock height.
Lift without extra stress on the front end. Because the springs take the place of the originals, the front suspension keeps its full range of travel and the stock upper mounts and control arms stay in use. Spacer-style lifts load the bushings and ball joints differently; a spring swap does not.
Room for bigger tires. The added ride height opens up more space in the front wheel wells, which helps when you run a larger wheel and tire. It also gives a little more ground clearance under the front axle area for trail use.
Built for the Raptor's electronic shocks. Eibach notes that this kit is designed to be used with the original Fox electronic shocks, so you keep the factory damping system rather than swapping to a different shock.
Road manners stay in mind. Eibach develops these springs from its off-road racing experience, aiming for stable, predictable on-road handling alongside better trail capability.
Features
- Set of 2 front coil springs, about +2.6 in. of front lift
- Front lift only; rear height is unchanged
- Designed for use with the OE Fox electronic shocks
- Retains the stock upper mounts and control arms
- Made in the U.S.A.
- Five-year Eibach warranty against defects in material and workmanship
Warnings: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Fitment: 2022-2026 Ford Bronco Raptor with the 3.0L engine. Eibach does not guarantee fitment, lift height or warranty on applications it does not list. Fitment confirmed against Eibach's published application list.
Guides & Manuals
Installation InstructionsWarranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Ford | Bronco | Raptor |
These Eibach Pro-Lift-Kit rear springs raise the back of a 2022-2026 Ford Bronco Raptor by swapping the factory coil springs for a taller, performance-tuned pair. The set contains two springs and is for the rear axle only, so it pairs with whatever front setup you run. Because it uses the original FOX electronic shocks, there is no coilover conversion, spacer stack or other modification to the shock hardware.
A lift that works with your factory shocks. The kit is built to be used with the OE FOX electronic shocks the Bronco Raptor already has. You keep the stock shock absorbers and their electronics while gaining ride height from the springs alone.
More room for bigger wheels and tires. Lifting the rear opens up extra fender clearance, which helps if you plan to run larger tires or want a more aggressive stance on the trail.
Stock mounts stay in place. Eibach designs the Pro-Lift-Kit line to lift without compromising the factory suspension components, so the springs seat in the original locations and the ride stays composed on the road.
Race-bred spring engineering. Eibach develops the line using lessons from off-road racing, aiming for added ground clearance and stable on-road handling together.
Features
- Set of 2 rear coil springs for the Bronco Raptor
- Designed to work with OE FOX electronic shocks
- Added ground clearance and fender clearance for larger wheels and tires
- Keeps the factory shocks and mounting points
- Made in the U.S.A.
- Five-year Eibach warranty
Warranty and notices
Eibach backs these springs with a five-year warranty against defects in material and workmanship under normal use. California Proposition 65: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm (www.P65Warnings.ca.gov).
Fitment: 2022-2026 Ford Bronco Raptor 3.0L, rear springs only, for use with the original FOX electronic shocks. Fitment confirmed against Eibach's published application list. Eibach does not guarantee fitment, ride height or warranty on applications it does not list.
Guides & Manuals
Installation InstructionsWarranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Ford | Bronco | Raptor |
These Eibach Pro-Lift-Kit front springs raise the front end of a 2022-2026 Ford Bronco Raptor with the 3.0L engine by about 1.1 inches. The set of two coil springs is made in the USA and is built to work with the factory FOX electronic shocks, so you keep the stock shock and electronic damping setup instead of moving to a coilover conversion.
Added ground clearance and fender room. Raising the front gives the truck a little more clearance at the nose and more space in the wheel wells for larger wheels and tires.
Keeps the factory suspension hardware. This is a spring-only change. The springs are made to retain the stock upper mounts and control arms, so you are not adding spacers that load the bushings and ball joints.
Designed for off-road use and daily driving. Eibach develops its Pro-Lift-Kit springs from its off-road racing experience, aiming to lift the truck without giving up ride quality or on-road stability.
Front only. Part E30-35-063-01-20 covers the front axle. It is sold as a set of 2 springs and is designed to use the OE FOX electronic shocks. Eibach does not guarantee fitment, height or warranty on applications it does not list.
Features
- Set of 2 front coil springs, about +1.1 in. of lift
- Made for the 2022-2026 Ford Bronco Raptor 3.0L
- Designed to use the OE FOX electronic shocks
- Retains stock upper mounts and control arms
- Made in U.S.A.
- Five-year warranty against defects in material and workmanship
Warranty and Prop 65. Eibach backs these springs with a five-year warranty on material and workmanship for use on passenger cars and light-duty trucks under normal conditions. California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm (www.P65Warnings.ca.gov).
Fitment: 2022-2026 Ford Bronco Raptor 3.0L. Fitment confirmed against Eibach's published application list.
Guides & Manuals
InstructionsWarranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Ford | Bronco | Raptor |
These Eibach Pro-Lift-Kit front springs raise the front end of a 2023-2026 Ford F-150 Raptor R by swapping the factory coil springs for taller, race-developed ones. The kit is front only and comes as a set of two springs, so you get more ground clearance and more room for bigger wheels and tires without changing the rest of the front suspension.
A lift that keeps the factory hardware. Because the springs drop in where the originals sit, the stock upper mounts and control arms stay in the truck. There are no spacers stacked on the strut, so the suspension keeps its full travel and your bushings and ball joints are not asked to work at new angles.
Built for the Raptor R's electronic shocks. Eibach designed this kit to be used with the original Fox electronic shocks, so you keep the adaptive damping the truck came with instead of replacing it with a coilover system.
Ride and handling. The goal is a lift with a tasteful amount of added height while keeping on-road stability and handling close to stock, which matters on a truck that spends its week on pavement and its weekend on the trail.
Made in the U.S.A. and backed by a warranty. Eibach builds these springs in the United States and covers them with a five-year warranty against defects in material and workmanship (coatings excluded) on passenger cars and light-duty trucks under normal use.
Features
- Set of 2 front coil springs, front only
- Increases front ground clearance
- More fender clearance for larger wheels and tires
- Keeps the stock upper mounts and control arms
- Designed to use the original Fox electronic shocks
- Made in the U.S.A.
- Five-year warranty
Emissions and safety. This is a chassis part with no emissions content. Prop 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. See www.P65Warnings.ca.gov.
Fitment: 2023-2026 Ford F-150 Raptor R with the 5.2L supercharged V8, 4WD. Eibach lists no other vehicle for this part and does not guarantee fitment on unlisted applications. Fitment confirmed against Eibach's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2026 | Ford | F-150 | Raptor R 5.2L Supercharged 4WD |
The Eibach Pro-Lift-Kit HD is a set of four coil springs (front and rear) made for the 2021-2026 Ford F-150 Raptor with the 3.5L EcoBoost V6 and 4WD. It raises the stance of the truck for extra ground clearance and room for larger wheels and tires, while the heavy-duty rear springs are built to hold that height when you load the truck down. It is listed for both 35in and 37in applications.
Lift that holds up under load. The HD rear springs carry a higher spring rate than Eibach's standard lift springs. That helps the rear keep its intended ride height with cargo, a bed rack, a camper or other accessories, without air bags, spring spacers or an overly stiff spring. Eibach designs the rear to be run at fully loaded height; the other rear heights it lists are for reference only, and its rear lift figures span 0 to 500 lbs of load. Too much lift will cause poor ride quality, so choose the height that suits how you use the truck.
Built to work with the factory shocks. This kit is designed to use the OE FOX electronic shocks, so you keep the Raptor's factory damping hardware instead of replacing it.
Made in the U.S.A. Eibach builds these springs in the United States and backs them with a five-year warranty against defects in material and workmanship, other than coatings, under normal use.
Features
- Set of 4 springs: front and rear
- Heavy-duty rear springs for loaded ride height
- Added ground clearance
- More fender clearance for larger wheels and tires
- Improved on-road stability and handling
- Designed for OE FOX electronic shocks
- Made in the U.S.A.
Emissions
Prop 65 warning applies to this product. No CARB EO number is listed for it.
Fitment: 2021-2026 Ford F-150 Raptor, 3.5L V6 EcoBoost, 4WD, 3rd generation, for 35in and 37in applications. Eibach does not guarantee fitment, height or warranty on unlisted applications. Fitment confirmed against Eibach's published application list.
Guides & Manuals
Installation Instructions D4099Installation Instructions D4156
Warranty
Installation Instructions
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
These Eibach Pro-Lift-Kit front springs raise the front of a 2021-2026 Ford F-150 Raptor (3.5L EcoBoost, 4WD, 3rd generation) by 2.2 inches. The kit is a set of two coil springs that replace the factory front springs, so you get more ground clearance and room for bigger wheels and tires without adding spacers or swapping the upper mounts and control arms. Eibach lists the same +2.2in front lift for both the 35-inch and 37-inch Raptor applications.
Lift from the springs alone. Because the lift comes from a taller spring rather than a spacer, the suspension keeps its full range of travel and the stock geometry stays in play. It is a front-only kit, so the rear of the truck is not changed.
Built to work with the factory shocks. Eibach notes that this kit is designed to use the OE FOX electronic shocks, so the Raptor's electronic suspension stays in service. Eibach also states that it does not guarantee fitment, height or warranty on applications it does not list.
American-made and backed for five years. The springs are made in the U.S.A. and carry Eibach's five-year warranty against defects in material and workmanship under normal use.
Features
- Set of 2 front coil springs
- +2.2in front lift on the F-150 Raptor, 35in and 37in tire applications
- Added ground clearance and fender clearance for larger wheels and tires
- Keeps stock upper mounts and control arms
- Designed for the OE FOX electronic shocks
- Made in U.S.A.
- Five-year Eibach warranty
Emissions and warnings: This is a chassis part with no emissions certification. Eibach carries a California Proposition 65 warning for this product (www.P65Warnings.ca.gov).
Fitment: 2021-2026 Ford F-150 Raptor, 3.5L V6 EcoBoost, 4WD, 3rd generation, with 35in or 37in tires. Fitment confirmed against Eibach's published application list.
Guides & Manuals
Installation InstructionsWarranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
These Eibach Pro-Lift-Kit front springs raise the front of a 2021-2026 Ford F-150 Raptor with the 3.5L EcoBoost V6 by about 1 inch. The kit is a set of two coil springs that drop in without coilovers or spacers, so the truck keeps its factory upper mounts and control arms. Eibach lists the kit for both 35 inch and 37 inch tire setups.
Lift from the spring, not from spacers. Because the lift comes from a taller spring rate and height rather than a spacer stacked on the shock, the suspension keeps its full range of travel and the ball joints and bushings are not asked to work at a new angle.
Made for the factory electronic shocks. Eibach notes that this kit is designed to be used with the original Fox electronic shocks, so the stock damping system stays in place and works with the new springs.
More room for bigger tires. The added front height gives extra fender clearance and ground clearance for larger wheels and tires, while Eibach designs the spring to hold on-road stability and ride quality.
Built in the U.S.A. Eibach makes the Pro-Lift-Kit springs in the United States, draws on its off-road race experience, and backs them with a five-year warranty.
- Set of 2 front coil springs (front only; rear springs are a separate kit)
- About 1 inch of front lift
- Listed for 35 inch and 37 inch tire applications
- Keeps the stock upper mounts and control arms
- Designed for the OE Fox electronic shocks
- Made in the U.S.A., five-year warranty
Prop 65: Eibach lists a California Proposition 65 warning for this product (cancer and reproductive harm; details at www.P65Warnings.ca.gov). Eibach lists no CARB EO number for it.
Fitment: 2021-2026 Ford F-150 Raptor, 3.5L V6 EcoBoost, 4WD, 3rd generation, in both the 35 inch and 37 inch applications. Fitment confirmed against Eibach's published application list.
Guides & Manuals
Installation InstructionsWarranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
These Eibach Pro-Lift-Kit front springs raise the front end of a 2010-2014 Ford F-150 SVT Raptor with a direct spring swap. The kit is a set of two coil springs, so there is no spacer or coilover conversion to deal with and the factory shocks stay in place.
More ground clearance and fender room. Raising the front gives the truck extra clearance over obstacles and more space in the wheel wells for larger wheels and tires.
Keeps the factory front end. The springs reuse the stock upper mounts and control arms, and Eibach states that no bump stop modifications are needed. Eibach also notes the springs were tested with factory dampers, including the magnetic ride type.
Built in the USA. The springs are made in the U.S.A. with race-derived off-road engineering, finished in Eibach's silver coating with the logo on the coil, and covered by Eibach's five-year warranty against defects in material and workmanship.
Installation notes. Eibach's instructions call for keeping the original spring isolators, dampers and tubing, installing each spring with the logo right side up, and setting the spring perch on the factory shock's lowest clip position. Have the wheel alignment checked afterward, along with brake line clearance and tire-to-fender clearance if you run larger tires.
Features
- Set of 2 front coil springs
- Designed for the 2010-2014 Ford F-150 SVT Raptor
- Increased ground clearance and fender clearance for larger wheels and tires
- Works with the factory dampers
- Made in the U.S.A.
- Five-year Eibach warranty
Emissions and warnings: Eibach lists a California Proposition 65 warning for this product (cancer and reproductive harm, www.P65Warnings.ca.gov).
Fitment: 2010-2014 Ford F-150 SVT Raptor, front axle. Eibach advises that it does not guarantee fitment, height or warranty on unlisted applications. Fitment confirmed against Eibach's published application list.
Guides & Manuals
Installation InstructionsWarranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.