Welcome to RaptorsOnly.com
-
Brands
Shop by brand
- 3D MAXpider
- Access
- Addictive Desert Designs
- Advan
- AEM Induction
- aFe
- Air Lift
- Airaid
- Alcon
- AlphaRex
- AMP Research
- AMS
- Anderson Composites
- ANZO
- ARB
- Atturo Tire
- AutoMeter
- AVS
- AWE Tuning
- BackRack
- Baer Brakes
- Baja Designs
- BAK
- Banks Power
- BBK
- BBS
- BD Diesel
- Belltech
- Bestop
- BFGoodrich
- BMC
- Body Armor 4x4
- Borla
- Brembo
- Brembo OE
- Bully Dog
- Bushwacker
- Camburg
- Clevite
- COBB
- Cometic Gasket
- COMP Cams
- CORSA Performance
- Covercraft
- CSF
- DBA
- DeatschWerks
- DFC
- Diode Dynamics
- DS18
- DV8 Offroad
- Eaton
- EBC
- Eibach
- Enkei
- Extang
- Fabtech
- Fel-Pro
- fifteen52
- Firestone
- Flowmaster
- Ford Racing
- Forgestar
- FORM Lighting
- FOX
- Garrett
- Gates
- GEN-Y Hitch
- Go Fast Bits
- Go Rhino
- Gram Lights
- Granatelli Motor Sports
- GSC Power Division
- Hawk Performance
- Hella
- Hellwig
- Hotchkis
- Husky Liners
- ICON
- Injen
- J&L
- JBA
- JLT
- K&N Engineering
- KC HiLiTES
- King Engine Bearings
- King Shocks
- Kleinn Air Horns
- Kooks Headers
- KYB
- LIQUI MOLY
- LUND
- Magnaflow
- Mahle OE
- Maxtrac
- Mayhem
- MBRP
- McGard
- Method Wheels
- MGP
- Michelin
- Mickey Thompson
- Mishimoto
- Moog
- Motul
- MTX Wheels
- N-Fab
- Nacho Offroad Technology
- NGK
- Nitrous Express
- Odyssey Battery
- ORACLE Lighting
- PowerStop
- Putco
- QA1
- Raceline
- Radium Engineering
- Rally Armor
- Rampage
- Raxiom
- Retrax
- Rhino-Rack
- Ridetech
- Rigid Industries
- Rival 4x4
- RockJock
- Roll-N-Lock
- Roush
- Royal Purple
- SCT Performance
- Skyjacker
- Snow Performance
- SPC Performance
- SPOD
- Stainless Works
- Superlift
- Superpro
- Timbren
- Torque Solution
- TOYO
- Truxedo
- Tuff Country
- Turbosmart
- UMI Performance
- Undercover
- Volant
- Vossen
- Wagner Tuning
- WeatherTech
- Weld
- Westin
- Whiteline
- Wilwood
- Yokohama Tire
- Yukon Gear & Axle
- Zone Offroad
No brands found. Try another name or initial.
156 brands
View all brands -
F-150 Raptor
- F-150 Raptor
-
1st Gen (2010-2014)
-
2nd Gen (2017-2020)
-
3rd Gen (2021-Present)
-
Raptor R (2023-Present)
-
Bronco Raptor
- Bronco Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
-
Ranger Raptor
- Ranger Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
Your cart
Subheading
Product comparison
Describe you product comparison grid
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
6 products
6 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
The Mishimoto License Plate Relocation Kit moves the front plate on the 2017-2020 Ford F-150 Raptor out of the airflow path. It is a powder coated steel bracket that mounts at the front tow hook and includes the hardware to install it.
Clears the airflow. On the EcoBoost F-150, the stock plate location blocks air that should be reaching the intercooler. Relocating the plate lets fresh air pass through to the intercooler, which Mishimoto says supports the performance of the twin-turbo engine.
Strong, simple bracket. The bracket is made from 4mm-thick steel for strength and rigidity and finished in a durable semi-gloss black powder coat that resists corrosion.
Everything in the box. The kit photo shows the bracket plate, the plate-mount bracket, and the bolts, nuts and washers used to fit it. It is covered by the Mishimoto Lifetime Warranty.
Features
- Relocates the license plate to the passenger-side tow hook, keeping the intercooler air duct clear
- 4mm-thick powder coated steel for strength and rigidity
- Semi-gloss black powder coat resists corrosion
- All necessary hardware included
- Mishimoto Lifetime Warranty
Fitment: Mishimoto lists the 2017-2020 F-150 Raptor 3.5L EcoBoost, along with the other F-150 trims and F-150 Lightning models in the table below. Fitment confirmed against Mishimoto's published application list.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
| 2015-2022 | Ford | F-150 | King Ranch |
| 2015-2022 | Ford | F-150 | Lariat |
| 2016-2022 | Ford | F-150 | Limited |
| 2015-2022 | Ford | F-150 | Platinum |
| 2018-2022 | Ford | F-150 | Police Responder |
| 2016-2022 | Ford | F-150 | SSV |
| 2021-2022 | Ford | F-150 | Tremor |
| 2015-2022 | Ford | F-150 | XL |
| 2015-2022 | Ford | F-150 | XLT |
| 2022-2023 | Ford | F-150 Lightning | Lariat |
| 2022-2023 | Ford | F-150 Lightning | Platinum |
| 2022-2023 | Ford | F-150 Lightning | Pro |
| 2023 | Ford | F-150 Lightning | Pro SSV |
| 2022-2023 | Ford | F-150 Lightning | XLT |
$85.49
The DV8 Offroad Capable Bumper Slanted Front License Plate Mount takes your plate off the grille and places it at the center of the factory Capable steel bumper, so air reaches the engine unobstructed. What sets it apart from the standard DV8 mount is the steep forward angle of the plate, which keeps it tucked back and out of the way when you attack hard climbs.
Angled for clearance. The plate is slanted at a steep angle to maximize clearance on hardcore trails, and DV8 notes that it removes in minutes when you want it gone entirely. The bumper stays in full view, as the mount is designed around the OEM Capable steel bumper.
More airflow, no fog light conflict. Relocating the plate below the grille lets the engine breathe, and DV8 states the bracket does not interfere with the fog lights.
Direct-fit and durable. The bracket is 3.5 mm steel plate with a micro-texture black powder coat. It is a direct-fit, bolt-on install using factory hardware, and DV8 estimates about 30 minutes.
Features
- Fits the factory Capable steel front bumper ONLY
- Slanted angle for maximum clearance
- Relocates the license plate below the grille
- Allows maximum airflow to the engine
- Removes in minutes for hardcore trails
- Does not interfere with the fog lights
- 3.5 mm steel plate, micro-texture black powder coat finish
- Easy bolt-on install using factory hardware
Emissions. DV8's product page carries a California Proposition 65 warning for this product: it can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA), which are known to the State of California to cause cancer and birth defects or other reproductive harm. More information is at www.P65Warnings.ca.gov.
Fitment: Fits the 2022-2026 Ford Bronco Raptor and the 2021-2026 Ford Bronco as DV8 lists it, on models with the factory Capable steel front bumper only. DV8 states this mount does not fit the HD Modular Steel or plastic bumpers. DV8's list does not exclude the Raptor. Fitment confirmed against DV8 Offroad's published application list.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Ford | Bronco | Raptor (OEM Capable steel bumper only) |
| 2021-2026 | Ford | Bronco | All trims (OEM Capable steel bumper only; not HD Modular Steel or plastic bumpers) |
$80.99
The DV8 Offroad Capable Bumper Front License Plate Mount moves your front plate off the grille and down to the center of the factory Capable steel bumper, so the engine bay gets all the airflow the Bronco was designed to give it. The plate sits low and centered, leaving the bumper face open and clean, and the whole bracket comes off in a few minutes when the trail gets serious.
Built to be taken off. DV8 recommends removing the bracket before moderate or difficult trails. It bolts on with factory hardware, so the plate can come off ahead of a rock section and go back on for the drive home.
Clear of the grille, fog lights and camera. The mount relocates the plate below the grille for maximum airflow to the engine. DV8 states that it does not interfere with the fog lights and does not obstruct the front camera.
Finished for the trail. The bracket is cut from 3.5 mm steel plate and coated in a micro-texture black powder coat. DV8 estimates about a 30 minute installation.
Features
- Fits the factory Capable steel front bumper ONLY
- Relocates the license plate below the grille
- Allows maximum airflow to the engine
- Removes in minutes for trail use; recommended off for moderate or harder trails
- Does not interfere with the fog lights or the front camera
- 3.5 mm steel plate, micro-texture black powder coat finish
- Easy bolt-on install using factory hardware
Emissions. DV8's product page carries a California Proposition 65 warning for this product: it can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA), which are known to the State of California to cause cancer and birth defects or other reproductive harm. More information is at www.P65Warnings.ca.gov.
Fitment: Fits the 2022-2026 Ford Bronco Raptor and the 2021-2026 Ford Bronco as DV8 lists it, on models with the factory Capable steel front bumper only. DV8 states this mount does not fit the HD Modular Steel or plastic bumpers. DV8's list does not exclude the Raptor. Fitment confirmed against DV8 Offroad's published application list.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Ford | Bronco | Raptor (OEM Capable steel bumper only) |
| 2021-2026 | Ford | Bronco | All trims (OEM Capable steel bumper only; not HD Modular Steel or plastic bumpers) |
$80.99
When an aftermarket rear bumper goes on a 6th-gen Ford Bronco, the factory plate position often needs a new home. The DV8 Offroad Rear License Plate Relocation Bracket moves the plate to the tailgate, beside the factory tire carrier, so it stays mounted and easy to read.
Clear of the sensors. DV8 positions the plate so it stays out of the way of the blind spot detection sensors, and lists the bracket as backup sensor compatible.
Lighting included. An ultrabright LED license plate light and its wiring come with the bracket. The install needs minor wiring work to connect the light, and DV8 estimates about 2 hours in total.
Bolt-on mounting. The bracket extends to the OEM tire carrier and mounts to the carrier corner bolts, with all hardware included. DV8 also lists it as compatible with its own aftermarket tire carriers. It does not work with the Ford HD tire carrier.
Built to last. It is cut from 3mm steel and finished in micro-texture black powder coat, and weighs about 3 lbs.
Features
- Relocates the license plate to the tailgate
- LED license plate light and wiring included
- Mounts to the OEM tire carrier
- 3mm steel with micro-texture black powder coat
- Hardware included; minor wiring required during install
- Backup sensor compatible
Prop 65. WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Fitment: DV8 Offroad lists this bracket for the 2021-2026 Ford Bronco in Base, Big Bend, Black Diamond, Outer Banks, Badlands, Wildtrak, First Edition and Raptor trims; the Bronco Raptor applies from 2022. DV8 recommends moving the Raptor logo when you install it. It does not work with the Ford HD tire carrier. Fitment confirmed against DV8 Offroad's published application list.
Guides & Manuals
CatalogThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | Bronco | Base, Big Bend, Black Diamond, Outer Banks, Badlands, Wildtrak, First Edition |
| 2022-2026 | Ford | Bronco | Raptor (move the Raptor logo) |
$53.99
The DV8 Offroad Factory Front Bumper License Relocation Bracket moves your front license plate off the grille and down to a clean, low position under the center of the bumper. It is made for Ford Broncos that wear the factory Heavy Duty Modular Steel Bumper, and DV8 lists it for all trims, including the Raptor.
Keeps the grille clear. The dealer-offered plate mount sits above the bumper in front of the grille, where it partly blocks airflow to the engine compartment. This bracket carries the plate below the center of the bumper instead, tilted at a slight angle, so the face of the truck stays open and the plate looks tidy.
Built for trail use. The angled placement keeps the plate from interfering with off-road driving. DV8 also suggests taking the bracket off for moderate or advanced trails, so a bottomed-out front end can't bend or damage it.
Works with the Bronco's driver-assist hardware. The plate sits below the adaptive cruise control sensor, and DV8 states the bracket is compatible with adaptive cruise control and with the factory skid plate.
Solid construction. The bracket is made from 3mm steel with a micro-texture black powder coat.
Features
- Relocates the license plate below the adaptive cruise sensor
- 3mm steel construction
- Micro-texture black powder coat finish
- Direct-fit design for the factory Heavy Duty Modular Steel Bumper
- Compatible with adaptive cruise control and the factory skid plate
Prop 65. WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Fitment: DV8 Offroad lists this bracket for the 2021-2026 Ford Bronco, all trims including the Raptor, with the factory Heavy Duty Modular Steel Bumper only. It does not fit the factory plastic bumper, the Capable steel bumper or DV8 bumpers. Fitment confirmed against DV8 Offroad's published application list.
Guides & Manuals
Installation GuideInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Ford | Bronco | Raptor (Modular Steel Bumper only) |
| 2021-2026 | Ford | Bronco | All trims (Modular Steel Bumper only) |
$138.59
An aftermarket winch-style front bumper on a 6th-generation Ford Bronco can block part of the factory front camera and spoil the 360-degree display. DV8 Offroad's Front Camera Relocation Bracket moves the camera to a position that clears the bumper, so you keep a clear picture ahead while you are on the trail.
Restores the front and 360 views. The bracket relocates the camera so a winch bumper no longer hides the forward view, and it corrects the 360-degree view that the bumper would otherwise obscure.
Adjustable for different setups. The bracket can be positioned to suit different bumper and accessory arrangements. It is made from 3mm steel with a micro-texture finish, and DV8 estimates about 2.5 hours for installation.
Keeps the lens clean. The kit includes an extended camera optical cable and a spray hose. The hose can be used to wash dust, dirt or mud off the lens while you are on the trail.
For winch-style bumpers only. The bracket works on all DV8 Bronco winch bumpers, and DV8 has also confirmed fitment on ADD Rock Fighter bumpers. If you run another manufacturer's winch bumper, verify fitment with that manufacturer first.
Features
- Relocates the front camera for full visibility with a winch bumper
- Corrects the 360-degree camera view
- Works on all DV8 and ADD Rock Fighter winch bumpers
- Includes an extended camera optical cable
- Includes a spray hose to clean a dusty or muddy lens
- Adjustable for different setups
- 3mm steel with micro-texture finish
Prop 65. This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Fitment: Fits the 2022-2026 Ford Bronco Raptor, and the Ford Bronco 2021-2026, when equipped with a winch-style front bumper. DV8 Offroad's application list covers the 2021-2026 Ford Bronco with winch front bumpers and does not exclude the Raptor. Fitment confirmed against DV8 Offroad's published application list.
Guides & Manuals
CatalogThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Ford | Bronco | Raptor (winch-style front bumper required) |
| 2021-2026 | Ford | Bronco | All trims (winch-style front bumper required) |
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.