Welcome to RaptorsOnly.com
-
Brands
Shop by brand
- 3D MAXpider
- Access
- Addictive Desert Designs
- Advan
- AEM Induction
- aFe
- Air Lift
- Airaid
- Alcon
- AlphaRex
- AMP Research
- AMS
- Anderson Composites
- ANZO
- ARB
- Atturo Tire
- AutoMeter
- AVS
- AWE Tuning
- BackRack
- Baer Brakes
- Baja Designs
- BAK
- Banks Power
- BBK
- BBS
- BD Diesel
- Belltech
- Bestop
- BFGoodrich
- BMC
- Body Armor 4x4
- Borla
- Brembo
- Brembo OE
- Bully Dog
- Bushwacker
- Camburg
- Clevite
- COBB
- Cometic Gasket
- COMP Cams
- CORSA Performance
- Covercraft
- CSF
- DBA
- DeatschWerks
- DFC
- Diode Dynamics
- DS18
- DV8 Offroad
- Eaton
- EBC
- Eibach
- Enkei
- Extang
- Fabtech
- Fel-Pro
- fifteen52
- Firestone
- Flowmaster
- Ford Racing
- Forgestar
- FORM Lighting
- FOX
- Garrett
- Gates
- GEN-Y Hitch
- Go Fast Bits
- Go Rhino
- Gram Lights
- Granatelli Motor Sports
- GSC Power Division
- Hawk Performance
- Hella
- Hellwig
- Hotchkis
- Husky Liners
- ICON
- Injen
- J&L
- JBA
- JLT
- K&N Engineering
- KC HiLiTES
- King Engine Bearings
- King Shocks
- Kleinn Air Horns
- Kooks Headers
- KYB
- LIQUI MOLY
- LUND
- Magnaflow
- Mahle OE
- Maxtrac
- Mayhem
- MBRP
- McGard
- Method Wheels
- MGP
- Michelin
- Mickey Thompson
- Mishimoto
- Moog
- Motul
- MTX Wheels
- N-Fab
- Nacho Offroad Technology
- NGK
- Nitrous Express
- Odyssey Battery
- ORACLE Lighting
- PowerStop
- Putco
- QA1
- Raceline
- Radium Engineering
- Rally Armor
- Rampage
- Raxiom
- Retrax
- Rhino-Rack
- Ridetech
- Rigid Industries
- Rival 4x4
- RockJock
- Roll-N-Lock
- Roush
- Royal Purple
- SCT Performance
- Skyjacker
- Snow Performance
- SPC Performance
- SPOD
- Stainless Works
- Superlift
- Superpro
- Timbren
- Torque Solution
- TOYO
- Truxedo
- Tuff Country
- Turbosmart
- UMI Performance
- Undercover
- Volant
- Vossen
- Wagner Tuning
- WeatherTech
- Weld
- Westin
- Whiteline
- Wilwood
- Yokohama Tire
- Yukon Gear & Axle
- Zone Offroad
No brands found. Try another name or initial.
156 brands
View all brands -
F-150 Raptor
- F-150 Raptor
-
1st Gen (2010-2014)
-
2nd Gen (2017-2020)
-
3rd Gen (2021-Present)
-
Raptor R (2023-Present)
-
Bronco Raptor
- Bronco Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
-
Ranger Raptor
- Ranger Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
Your cart
Subheading
Product comparison
Describe you product comparison grid
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
13 products
13 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$199.00
Our Camburg MIG shackles replace the stock light-duty version on your F-150. The stock shackles are stamped out of thin metal and use a rubber bushing which both allow for a flexy component that also binds as it cycles since the rubber bushings are vulcanized into the shackle. Our shackles are a fabricated boxed gusseted design that is much stronger and use polyurethane bushings that pivot smoother with less flex. They are MIG welded and we powder coat them a textured gray to match our billet arms and the FOX shock hard anodize. They are ready to be bolted on using the factory hardware. These are available in a stock length, so they do not raise or lower the ride height or an 1.5" extended version that will lower the ride height about 1". Both are designed for stock and Deaver leaf springs, the "stock length" versions do not work with icon leaf springs. CAD Designed, CNC Laser Cut and Formed MIG Welded Polyurethane Bushings Powder coated textured gray Made in the USA The stock length shackles are 4.5" eye to eye and the extended are 6".
- CAD Designed, CNC Laser Cut and Formed
- Smoother action and less deflection
- Made in the USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2023 | Ford | F-150 | King Ranch |
| 2015-2023 | Ford | F-150 | Lariat |
| 2016-2023 | Ford | F-150 | Limited |
| 2015-2023 | Ford | F-150 | Platinum |
| 2018-2023 | Ford | F-150 | Police Responder |
| 2017-2020 | Ford | F-150 | Raptor |
| 2016-2023 | Ford | F-150 | SSV |
| 2021-2023 | Ford | F-150 | Tremor |
| 2015-2023 | Ford | F-150 | XL |
| 2015-2023 | Ford | F-150 | XLT |
$199.00
Our Camburg MIG shackles replace the stock light-duty version on your F-150. The stock shackles are stamped out of thin metal and use a rubber bushing which both allow for a flexy component that also binds as it cycles since the rubber bushings are vulcanized into the shackle. Our shackles are a fabricated boxed gusseted design that is much stronger and use polyurethane bushings that pivot smoother with less flex. They are MIG welded and we powder coat them a textured gray to match our billet arms and the FOX shock hard anodize. They are ready to be bolted on using the factory hardware. These are available in a stock length, so they do not raise or lower the ride height or an 1.5" extended version that will lower the ride height about 1". Both are designed for stock and Deaver leaf springs, the "stock length" versions do not work with icon leaf springs. CAD Designed, CNC Laser Cut and Formed MIG Welded Polyurethane Bushings Powder coated textured gray Made in the USA The stock length shackles are 4.5" eye to eye and the extended are 6".
- CAD Designed, CNC Laser Cut and Formed
- Smoother action and less deflection
- Made in the USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2023 | Ford | F-150 | King Ranch |
| 2015-2023 | Ford | F-150 | Lariat |
| 2016-2023 | Ford | F-150 | Limited |
| 2015-2023 | Ford | F-150 | Platinum |
| 2018-2023 | Ford | F-150 | Police Responder |
| 2017-2020 | Ford | F-150 | Raptor |
| 2016-2023 | Ford | F-150 | SSV |
| 2021-2023 | Ford | F-150 | Tremor |
| 2015-2023 | Ford | F-150 | XL |
| 2015-2023 | Ford | F-150 | XLT |
$199.00
Our Camburg MIG shackles replace the stock light-duty version on your F-150. The stock shackles are stamped out of thin metal and use a rubber bushing which both allow for a flexy component that also binds as it cycles since the rubber bushings are vulcanized into the shackle. Our shackles are a fabricated boxed gusseted design that is much stronger and use polyurethane bushings that pivot smoother with less flex. They are MIG welded and we powder coat them a textured black. They are ready to be bolted on using the factory hardware. These are available in a stock length, so they do not raise or lower the ride height or an 1.5" extended version that will lower the ride height about 1". Both are designed for stock and Deaver leaf springs, the "stock length" versions do not work with icon leaf springs. CAD Designed, CNC Laser Cut and Formed MIG Welded Polyurethane Bushings Powder coated textured black Made in the USA The stock length shackles are 4.5" eye to eye and the extended are 6".
- CAD Designed, CNC Laser Cut and Formed
- Smoother action and less deflection
- Made in the USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2007-2008 | Ford | F-150 | FX2 |
| 2004-2009 | Ford | F-150 | FX4 |
| 2006-2008 | Ford | F-150 | Harley-Davidson Edition |
| 2005-2009 | Ford | F-150 | King Ranch |
| 2004-2009 | Ford | F-150 | Lariat |
| 2008 | Ford | F-150 | Limited |
| 2009 | Ford | F-150 | Platinum |
| 2004-2009 | Ford | F-150 | STX |
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2008 | Ford | F-150 | THE 60TH ANNIVERSARY EDITION |
| 2004-2009 | Ford | F-150 | XL |
| 2004-2009 | Ford | F-150 | XLT |
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2025 | Ford | F-150 | King Ranch |
| 2015-2025 | Ford | F-150 | Lariat |
| 2016-2023 | Ford | F-150 | Limited |
| 2015-2025 | Ford | F-150 | Platinum |
| 2018-2025 | Ford | F-150 | Police Responder |
| 2017-2025 | Ford | F-150 | Raptor |
| 2016-2025 | Ford | F-150 | SSV |
| 2024-2025 | Ford | F-150 | STX |
| 2021-2025 | Ford | F-150 | Tremor |
| 2015-2025 | Ford | F-150 | XL |
| 2015-2025 | Ford | F-150 | XLT |
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2007-2008,2010-2014 | Ford | F-150 | FX2 |
| 2004-2014 | Ford | F-150 | FX4 |
| 2006-2008,2010-2012 | Ford | F-150 | Harley-Davidson Edition |
| 2005-2025 | Ford | F-150 | King Ranch |
| 2004-2025 | Ford | F-150 | Lariat |
| 2011 | Ford | F-150 | Lariat Limited |
| 2008,2013-2014,2016-2023 | Ford | F-150 | Limited |
| 2009-2025 | Ford | F-150 | Platinum |
| 2018-2025 | Ford | F-150 | Police Responder |
| 2017-2025 | Ford | F-150 | Raptor |
| 2016-2025 | Ford | F-150 | SSV |
| 2004-2014,2024-2025 | Ford | F-150 | STX |
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2008 | Ford | F-150 | THE 60TH ANNIVERSARY EDITION |
| 2021-2025 | Ford | F-150 | Tremor |
| 2004-2025 | Ford | F-150 | XL |
| 2004-2025 | Ford | F-150 | XLT |
| 2004 | Ford | F-150 Heritage | SVT Lightning |
| 2004 | Ford | F-150 Heritage | XL |
| 2004 | Ford | F-150 Heritage | XLT |
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2025 | Ford | F-150 | King Ranch |
| 2015-2025 | Ford | F-150 | Lariat |
| 2016-2023 | Ford | F-150 | Limited |
| 2015-2025 | Ford | F-150 | Platinum |
| 2018-2025 | Ford | F-150 | Police Responder |
| 2017-2025 | Ford | F-150 | Raptor |
| 2016-2025 | Ford | F-150 | SSV |
| 2024-2025 | Ford | F-150 | STX |
| 2021-2025 | Ford | F-150 | Tremor |
| 2015-2025 | Ford | F-150 | XL |
| 2015-2025 | Ford | F-150 | XLT |
The ICON 198510 multi-rate leaf spring is a direct bolt-in replacement for the factory rear leaf pack on the 2017-2020 Ford F-150 Raptor. It is built to ride slightly softer than stock, then stiffen up when you add weight, so one spring suits a bare truck or a fully loaded build.
Smoother over rough ground. ICON set the base spring rate a little lighter than factory, since the stock rate runs stiff on small, choppy terrain. The result is better ride quality and extra droop travel at the rear axle.
Three spring rates in one kit. An add-in leaf ships with the spring. Swapping it in or adding it to the pack raises the rate by 20% or 40% over the as-shipped setting. On the Raptor, the as-shipped Option 1 gives about +1.00 in. of lift over stock unloaded, Option 2 about +2.25 in. unloaded, and Option 3 about +3.00 in. unloaded, according to ICON. Option 2 holds about +1.00 in. with a 400 lb constant load, and Option 3 holds about +0.50 in. with an 850 lb constant load. That suits spare tires, chase racks, roof-top tents and other added rear weight.
Built to last off-road. A triple military wrap on the front eyelet and a half wrap on the rear eyelet add strength and durability. A rebound leaf helps limit axle wrap, and leaf separators and tip inserts cut noise and friction.
- "ICON 1K" tested under rigorous off-road conditions to validate tune, performance, strength, and durability
- Leaf separators and tip inserts reduce noise and friction while increasing ride comfort
- Triple military wrap front eyelet and rear half wrap for increased durability
- Direct bolt-in to OEM spring location makes for an easy install
- 3 user-adjustable spring rates for unique vehicle setups
- Rebound leaf reduces severe axle wrap
Emissions: Not an emissions-controlled part. Prop 65 warning applies per the supplier listing.
Fitment: ICON lists this leaf spring for the 2017-2020 Ford F-150 Raptor. ICON also approves it on 2021-2026 F-150 XL, XLT, STX, Lariat, King Ranch, Platinum and Tremor models, not the Raptor, when used with ICON 2.5 Aluminum Series rear shocks. Fitment confirmed against ICON's published application information.
Guides & Manuals
Installation InstructionsInstallation Instructions
Installation Instructions
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
The ICON RXT multi-rate leaf pack is a rear leaf spring upgrade built specifically for the 2010-2014 Ford F-150 SVT Raptor. It gives the truck a choice of three spring rates from a single kit, so you can set the rear suspension up for a stock-weight truck or one carrying a chase rack, spare tires and recovery gear. The pack is a direct replacement for the factory rear springs and is designed to work with ICON's full RXT rear suspension system.
Three user-configurable spring rates. The kit includes an add-in leaf that can be left out or added to the pack. According to ICON, the standard configuration gives about 0.75 in. of lift over stock. Adding the leaf for Rate Option #1 (10% over the standard rate) gives about 1.25 in. of lift, and Rate Option #2 (20% over standard) gives about 1.75 in. of lift. ICON also notes that with the 10% option the truck holds its 0.75 in. of lift under a 300 lb constant load, and with the 20% option under a 600 lb load.
Built to resist axle wrap. A rebound leaf was added to reduce the axle wrap that Raptors can show under hard acceleration and braking. ICON found this issue through its own extensive testing.
Durable construction. A triple military wrapped front eyelet and a half wrapped rear eyelet add strength and durability to the spring pack.
Smoother ride and more droop. Tip inserts and leaf separators cut friction between leaves, and OE style bonded rubber bushings stay maintenance free and do not squeak. ICON reduced the spring rate slightly from the original components so the truck rides better and gains droop travel when the full ICON RXT rear system is installed.
Features
- New Ford OE front spring eye bolts included for easy removal and re-installation of springs
- Triple military wrap front eyelet and rear half wrap for increased durability and safety
- Bumpstop extensions included for use when no aftermarket bumpstop kit is installed
- Tip inserts and leaf separators to reduce friction and improve ride comfort
- OE style bonded rubber bushings that are maintenance free and do not squeak
- 3 user-adjustable spring rates for unique setups or added weight
- Rebound leaf reduces severe axle wrap
Fitment: 2010-2014 Ford F-150 SVT Raptor, as named in ICON's product listing for part 198501. Fitment confirmed against ICON Vehicle Dynamics' published product page.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
Hellwig's medium-duty EZ-990 Helper Springs pack a lot of capability in every box. Packaged complete with the same heavy duty powder coated and plated components, hardware and installation instructions as our heavy duty helper spring products, these kits are designed for the vehicles that need lighter assistance in carrying a load. Simple bolt on design using common hand tools provide the installer ease of installation and the vehicle owner hassle free use. Ideally suited for light towing and loads, these units are fully adjustable using the heavy duty U-bolts included in the kit using simple hand tools. If your tow and haul needs change, simply adjust the heavy duty U-bolts to suit the new load requirements. Once installed and adjusted you are free to haul or tow with greater control and stability. Manufactured with heat treated ASTM 5160 alloy spring steel in our California based facility, these units are rated up to 2,000 lb. level load carrying capacity. They are a great cost effective spring solution and can be adjusted independently for uneven side to side loads.
Installation Instructions- Level Load Capacity up to 2000lbs
- Ideal for small trucks and SUV's
- Limited Lifetime Warranty
- Step bracket style leaf
- Easy Installation
- Tunable
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | FX2 |
| 2009-2014 | Ford | F-150 | FX4 |
| 2010-2012 | Ford | F-150 | Harley-Davidson Edition |
| 2009-2014 | Ford | F-150 | King Ranch |
| 2009-2014 | Ford | F-150 | Lariat |
| 2011 | Ford | F-150 | Lariat Limited |
| 2013-2014 | Ford | F-150 | Limited |
| 2009-2014 | Ford | F-150 | Platinum |
| 2009-2014 | Ford | F-150 | STX |
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2009-2014 | Ford | F-150 | XL |
| 2009-2014 | Ford | F-150 | XLT |
Hellwig's medium-duty EZ-990 Helper Springs pack a lot of capability in every box. Packaged complete with the same heavy duty powder coated and plated components, hardware and installation instructions as our heavy duty helper spring products, these kits are designed for the vehicles that need lighter assistance in carrying a load. Simple bolt on design using common hand tools provide the installer ease of installation and the vehicle owner hassle free use. Ideally suited for light towing and loads, these units are fully adjustable using the heavy duty U-bolts included in the kit using simple hand tools. If your tow and haul needs change, simply adjust the heavy duty U-bolts to suit the new load requirements. Once installed and adjusted you are free to haul or tow with greater control and stability. Manufactured with heat treated ASTM 5160 alloy spring steel in our California based facility, these units are rated up to 2,000 lb. level load carrying capacity. They are a great cost effective spring solution and can be adjusted independently for uneven side to side loads.
Installation Instructions- Level Load Capacity up to 2000lbs
- Ideal for small trucks and SUV's
- Limited Lifetime Warranty
- Step bracket style leaf
- Easy Installation
- Tunable
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2022 | Ford | F-150 | King Ranch |
| 2015-2022 | Ford | F-150 | Lariat |
| 2016-2022 | Ford | F-150 | Limited |
| 2015-2022 | Ford | F-150 | Platinum |
| 2018-2022 | Ford | F-150 | Police Responder |
| 2017-2022 | Ford | F-150 | Raptor |
| 2016-2022 | Ford | F-150 | SSV |
| 2021-2022 | Ford | F-150 | Tremor |
| 2015-2022 | Ford | F-150 | XL |
| 2015-2022 | Ford | F-150 | XLT |
Silent Support System Series up to 2500 lbs. Level Load capacity. Great for ½, ¾ and 1-ton applications. Over axle mounting design makes for a quick and easy installation. ATTENTION: IF EQUIPPED WITH FACTORY CONTACT OVERLOAD SPRINGS CHECK VEHICLE FITMENT ABOVE FOR SPECIFIC INFORMATION ON YOUR YEAR AND MODEL VEHICLE.
Installation Instructions- Level Load Capacity up to 2500 lbs.
- Silent Support System Bushings
- Limited Lifetime Warranty
- Over axle mounting design
- Easy installation
- Tunable
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1975-1979,1984-1989 | Dodge | D100 | Custom |
| 1976-1978 | Dodge | D100 | Warlock |
| 1979 | Dodge | D100 | Warlock II |
| 1970-1974 | Dodge | D100 Pickup | Base |
| 1977-1993 | Dodge | D150 | Base |
| 1982-1983 | Dodge | D150 | Miser |
| 1990-1991 | Dodge | D150 | S |
| 1977-1980 | Dodge | D200 | Base |
| 1975-1976 | Dodge | D200 | Custom |
| 1970-1974 | Dodge | D200 Pickup | Base |
| 1981-1993 | Dodge | D250 | Base |
| 1977-1980 | Dodge | D300 | Base |
| 1975-1976 | Dodge | D300 | Custom |
| 1970-1974 | Dodge | D300 Pickup | Base |
| 1994-1996 | Dodge | Ram 1500 | Base |
| 1997-2001 | Dodge | Ram 1500 | Laramie |
| 1997 | Dodge | Ram 1500 | LT |
| 2001-2002 | Dodge | Ram 1500 | SLT |
| 1997-2001 | Dodge | Ram 1500 | Sport |
| 1997-1998 | Dodge | Ram 1500 | SS/T 5.9L |
| 1997-2002 | Dodge | Ram 1500 | ST |
| 1997-2001 | Dodge | Ram 1500 | WS |
| 1994-2002 | Dodge | Ram 2500 | Base |
| 1994-2002 | Dodge | Ram 3500 | Base |
| 1975-1977,1986-1989 | Dodge | W100 | Custom |
| 1970-1974 | Dodge | W100 Pickup | Base |
| 1977-1993 | Dodge | W150 | Base |
| 1990-1991 | Dodge | W150 | S |
| 1975-1980 | Dodge | W200 | Base |
| 1970-1974 | Dodge | W200 Pickup | Base |
| 1981-1993 | Dodge | W250 | Base |
| 1966-1974 | Ford | Bronco | Base |
| 1975-1993 | Ford | Bronco | Custom |
| 1985-1996 | Ford | Bronco | Eddie Bauer |
| 1975,1978 | Ford | Bronco | Northland |
| 1975 | Ford | Bronco | Ranger |
| 1978-1981 | Ford | Bronco | Ranger XLT |
| 1968-1969 | Ford | Bronco | Roadster |
| 1975-1977 | Ford | Bronco | Sport |
| 1968-1973 | Ford | Bronco | Wagon |
| 1990-1996 | Ford | Bronco | XL |
| 1982-1983 | Ford | Bronco | XLS |
| 1984-1992,1994-1996 | Ford | Bronco | XLT |
| 1982-1983,1993 | Ford | Bronco | XLT Lariat |
| 1992 | Ford | Bronco | XLT Nite |
| 1995-1996 | Ford | Bronco | XLT Sport |
| 1965-1974,1976-1978 | Ford | F-100 | Base |
| 1975-1979 | Ford | F-100 | Custom |
| 1975-1978 | Ford | F-100 | Northland |
| 1975-1979 | Ford | F-100 | Ranger |
| 1978-1979 | Ford | F-100 | Ranger Lariat |
| 1975-1979 | Ford | F-100 | Ranger XLT |
| 1977 | Ford | F-100 | XLT |
| 1976-1978 | Ford | F-150 | Base |
| 1975-1979 | Ford | F-150 | Custom |
| 2010-2014 | Ford | F-150 | FX2 |
| 2009-2014 | Ford | F-150 | FX4 |
| 2010-2012 | Ford | F-150 | Harley-Davidson Edition |
| 2009-2014 | Ford | F-150 | King Ranch |
| 2009-2014 | Ford | F-150 | Lariat |
| 2011 | Ford | F-150 | Lariat Limited |
| 2013-2014 | Ford | F-150 | Limited |
| 1975-1978 | Ford | F-150 | Northland |
| 2009-2014 | Ford | F-150 | Platinum |
| 1975-1979 | Ford | F-150 | Ranger |
| 1978-1979 | Ford | F-150 | Ranger Lariat |
| 1975-1979 | Ford | F-150 | Ranger XLT |
| 2009-2014 | Ford | F-150 | STX |
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2009-2014 | Ford | F-150 | XL |
| 1977,2009-2014 | Ford | F-150 | XLT |
| 1965-1974,1976-1978 | Ford | F-250 | Base |
| 1975-1979 | Ford | F-250 | Custom |
| 1975-1978 | Ford | F-250 | Northland |
| 1975-1979 | Ford | F-250 | Ranger |
| 1978-1979 | Ford | F-250 | Ranger Lariat |
| 1975-1979 | Ford | F-250 | Ranger XLT |
| 1977 | Ford | F-250 | XLT |
Silent Support System Series up to 2500 lbs. Level Load capacity. Great for 1/2, 3/4 and 1-ton applications. Over axle mounting design makes for a quick and easy installation. ATTENTION: IF EQUIPPED WITH FACTORY CONTACT OVERLOAD SPRINGS CHECK VEHICLE FITMENT ABOVE FOR SPECIFIC INFORMATION ON YOUR YEAR AND MODEL VEHICLE.
Installation Instructions- Level Load Capacity up to 2500 lbs.
- Silent Support System Bushings
- Limited Lifetime Warranty
- Over axle mounting design
- Easy installation
- Tunable
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013 | Chevrolet | Express 2500 | Base |
| 2013 | Chevrolet | Express 2500 | LS |
| 2013 | Chevrolet | Express 2500 | LT |
| 2013 | Chevrolet | Silverado 2500 HD | LT |
| 2013 | Chevrolet | Silverado 2500 HD | LTZ |
| 2013 | Chevrolet | Silverado 2500 HD | WT |
| 2013 | Chevrolet | Suburban 2500 | LS |
| 2013 | Chevrolet | Suburban 2500 | LT |
| 2007-2008 | Ford | F-150 | FX2 |
| 2004-2008 | Ford | F-150 | FX4 |
| 2006-2008 | Ford | F-150 | Harley-Davidson Edition |
| 2005-2008,2015-2022 | Ford | F-150 | King Ranch |
| 2004-2008,2015-2022 | Ford | F-150 | Lariat |
| 2008,2016-2022 | Ford | F-150 | Limited |
| 2015-2022 | Ford | F-150 | Platinum |
| 2018-2022 | Ford | F-150 | Police Responder |
| 2017-2022 | Ford | F-150 | Raptor |
| 2016-2022 | Ford | F-150 | SSV |
| 2004-2008 | Ford | F-150 | STX |
| 2008 | Ford | F-150 | THE 60TH ANNIVERSARY EDITION |
| 2021-2022 | Ford | F-150 | Tremor |
| 2004-2008,2015-2022 | Ford | F-150 | XL |
| 2004-2008,2015-2022 | Ford | F-150 | XLT |
| 2013 | GMC | Savana 2500 | Base |
| 2013 | GMC | Savana 2500 | LS |
| 2013 | GMC | Savana 2500 | LT |
| 2013 | GMC | Sierra 2500 HD | Denali |
| 2013 | GMC | Sierra 2500 HD | SLE |
| 2013 | GMC | Sierra 2500 HD | SLT |
| 2013 | GMC | Sierra 2500 HD | WT |
| 2013 | GMC | Yukon XL 2500 | SLE |
| 2013 | GMC | Yukon XL 2500 | SLT |
| 2013 | Ram | 2500 | Big Horn |
| 2013 | Ram | 2500 | Laramie |
| 2013 | Ram | 2500 | Laramie Longhorn |
| 2013 | Ram | 2500 | Lone Star |
| 2013 | Ram | 2500 | Outdoorsman |
| 2013 | Ram | 2500 | Power Wagon |
| 2013 | Ram | 2500 | SLT |
| 2013 | Ram | 2500 | ST |
| 2013 | Ram | 2500 | Tradesman |
$299.00
Looking for the best? Our Camburg TIG shackles replace the stock light-duty version on your F-150. The stock shackles are stamped out of thin metal and use a rubber bushing which both allow for a flexy component that also binds as it cycles since the rubber bushings are vulcanized into the shackle. Our TIG shackles are a fabricated boxed gusseted design from 4130 chromoly that is much stronger than mild steel and use polyurethane bushings that pivot smoother with less flex. We TIG weld them, bead blast the surfaces then powder coat them a textured gray to match our billet arms and the FOX shock hard anodize. They are ready to be bolted on using the factory hardware. These are available in a stock length, so they do not raise or lower the ride height or an 1.5" extended version that will lower the ride height about 1". Both are designed for stock and Deaver leaf springs, the "stock length" versions do not work with icon leaf springs. CAD Designed, CNC Laser Cut and Formed 4130 Chromoly TIG Welded Powder coated textured gray Polyurethane Bushings Made in the USA The stock length shackles are 4.5" eye to eye and the extended are 6".
- CAD Designed, CNC Laser Cut and Formed
- Smoother action and less deflection
- Made in the USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2023 | Ford | F-150 | King Ranch |
| 2015-2023 | Ford | F-150 | Lariat |
| 2016-2023 | Ford | F-150 | Limited |
| 2015-2023 | Ford | F-150 | Platinum |
| 2018-2023 | Ford | F-150 | Police Responder |
| 2017-2020 | Ford | F-150 | Raptor |
| 2016-2023 | Ford | F-150 | SSV |
| 2021-2023 | Ford | F-150 | Tremor |
| 2015-2023 | Ford | F-150 | XL |
| 2015-2023 | Ford | F-150 | XLT |
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.