Welcome to RaptorsOnly.com
-
Brands
Shop by brand
- 3D MAXpider
- Access
- Addictive Desert Designs
- Advan
- AEM Induction
- aFe
- Air Lift
- Airaid
- Alcon
- AlphaRex
- AMP Research
- AMS
- Anderson Composites
- ANZO
- ARB
- Atturo Tire
- AutoMeter
- AVS
- AWE Tuning
- BackRack
- Baer Brakes
- Baja Designs
- BAK
- Banks Power
- BBK
- BBS
- BD Diesel
- Belltech
- Bestop
- BFGoodrich
- BMC
- Body Armor 4x4
- Borla
- Brembo
- Brembo OE
- Bully Dog
- Bushwacker
- Camburg
- Clevite
- COBB
- Cometic Gasket
- COMP Cams
- CORSA Performance
- Covercraft
- CSF
- DBA
- DeatschWerks
- DFC
- Diode Dynamics
- DS18
- DV8 Offroad
- Eaton
- EBC
- Eibach
- Enkei
- Extang
- Fabtech
- Fel-Pro
- fifteen52
- Firestone
- Flowmaster
- Ford Racing
- Forgestar
- FORM Lighting
- FOX
- Garrett
- Gates
- GEN-Y Hitch
- Go Fast Bits
- Go Rhino
- Gram Lights
- Granatelli Motor Sports
- GSC Power Division
- Hawk Performance
- Hella
- Hellwig
- Hotchkis
- Husky Liners
- ICON
- Injen
- J&L
- JBA
- JLT
- K&N Engineering
- KC HiLiTES
- King Engine Bearings
- King Shocks
- Kleinn Air Horns
- Kooks Headers
- KYB
- LIQUI MOLY
- LUND
- Magnaflow
- Mahle OE
- Maxtrac
- Mayhem
- MBRP
- McGard
- Method Wheels
- MGP
- Michelin
- Mickey Thompson
- Mishimoto
- Moog
- Motul
- MTX Wheels
- N-Fab
- Nacho Offroad Technology
- NGK
- Nitrous Express
- Odyssey Battery
- ORACLE Lighting
- PowerStop
- Putco
- QA1
- Raceline
- Radium Engineering
- Rally Armor
- Rampage
- Raxiom
- Retrax
- Rhino-Rack
- Ridetech
- Rigid Industries
- Rival 4x4
- RockJock
- Roll-N-Lock
- Roush
- Royal Purple
- SCT Performance
- Skyjacker
- Snow Performance
- SPC Performance
- SPOD
- Stainless Works
- Superlift
- Superpro
- Timbren
- Torque Solution
- TOYO
- Truxedo
- Tuff Country
- Turbosmart
- UMI Performance
- Undercover
- Volant
- Vossen
- Wagner Tuning
- WeatherTech
- Weld
- Westin
- Whiteline
- Wilwood
- Yokohama Tire
- Yukon Gear & Axle
- Zone Offroad
No brands found. Try another name or initial.
156 brands
View all brands -
F-150 Raptor
- F-150 Raptor
-
1st Gen (2010-2014)
-
2nd Gen (2017-2020)
-
3rd Gen (2021-Present)
-
Raptor R (2023-Present)
-
Bronco Raptor
- Bronco Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
-
Ranger Raptor
- Ranger Raptor
-
Suspension
-
Wheels & Tires
-
Brakes
-
Lighting
-
Bumpers & Armor
-
Racks
-
Exterior Accessories
-
Interior Accessories
-
Performance
-
Engine & Cooling
-
Drivetrain
Your cart
Subheading
Product comparison
Describe you product comparison grid
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
Performance
Choose a type to refine the products below.
119 products
119 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$1,499.99
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2023 | Ford | F-150 | King Ranch |
| 2021-2023 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2023 | Ford | F-150 | Platinum |
| 2021-2023 | Ford | F-150 | Police Responder |
| 2021-2023 | Ford | F-150 | Raptor |
| 2021-2023 | Ford | F-150 | SSV |
| 2021-2023 | Ford | F-150 | Tremor |
| 2021-2023 | Ford | F-150 | XL |
| 2021-2023 | Ford | F-150 | XLT |
This is Borla's ATAK mid-section for the 2021-2026 Ford F-150 Raptor with the 3.5L V6, replacing the factory center section with a 3-inch true dual muffler assembly. It is a connecting-pipe upgrade, not a full cat-back, so the rear of the exhaust stays as it is unless you choose to change it.
True dual layout. The assembly keeps two separate paths from front to back, which Borla pairs with its ATAK sound level for an aggressive, more exciting driving experience without drone.
Polyphonic Harmonizer. Inside are Borla's patented units that use pipes of different diameters and lengths to create several exhaust notes that blend into a clean, rich, full-bodied tone, which Borla says improves power.
Active valves retained. The system contains active exhaust valves, so the factory valve function is kept.
Tail pipe choices. It works with the original equipment tail pipes or Borla's separate tail pipes in black chrome, Brawler black coated, or carbon fiber with black anodized center.
Build quality. T-304 stainless steel, mandrel bends and CNC manufacturing, plus a Million-Mile Warranty.
Features
- 3 in. true dual mid-section / muffler assembly
- ATAK sound level
- Polyphonic Harmonizer technology and active exhaust valves
- Fits with OE tail pipes or Borla 60727BC, 60727CB or 60727CFBA tail pipes
- T-304 stainless steel, Million-Mile Warranty
California Proposition 65. Borla's page carries this notice: welding, brazing or thermal cutting on this product can expose you to chemicals including chromium, nickel, cobalt, arsenic, cadmium and lead, which are known to the State of California to cause cancer, birth defects and other reproductive harm. The product as sold presents no hazard in its finished form. More at www.P65Warnings.ca.gov.
Fitment: 2021-2026 Ford F-150 Raptor, 3.5L V6, automatic transmission, 2WD and 4WD, crew cab with 5 ft 6 in short bed, 145.4 in. wheelbase. Borla lists the 3.5L Raptor only, not the Raptor R. Fitment confirmed against Borla's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor 3.5L V6, crew cab short bed (5 ft 6 in), 145.4 in. wheelbase |
This Borla 3 in. tail pipe kit puts a carbon fiber finish on the exhaust of the 2021-2026 Ford F-150 Raptor and 2023-2026 F-150 Raptor R. Every pipe ends in a single 4.5 in. round carbon fiber tip with a black anodized center.
Carbon fiber tips. The carbon fiber tips are the feature that sets this kit apart from Borla's black chrome and Brawler versions of the same tail pipe.
Expect more volume. Replacing original tail pipes that have resonators or resonated tips raises the sound level. Ultra-smooth mandrel bends keep exhaust flow moving freely through the pipe.
Premium stainless steel. The pipes are T-304 stainless steel, which Borla rates above T-400 series grades such as 409 for performance and durability. CNC manufacturing keeps the fit accurate, heat shields are included on the pipes, and each tail pipe is covered by Borla's Million-Mile Warranty.
Choose your mid-section. The kit fits with Borla mid-section / muffler assemblies 60728, 60736 or 60737, or with the original mid-section / muffler assembly.
Features
- Pipe diameter: 3 in. T-304 stainless steel
- Tips: single 4.5 in. round carbon fiber with black anodized centers
- Tip exit: truck single split rear exit
- Heat shields included on the pipes
- Fits with Borla 60728, 60736 or 60737 mid-sections, or the O.E. mid-section
- Black chrome and Brawler-style black coated tip versions are also offered by Borla
Prop 65 warning: operations such as welding or cutting on this product may expose you to chemicals including chromium, nickel, cobalt, arsenic, cadmium and lead, which are known to the State of California to cause cancer, birth defects and other reproductive harm.
Fitment: 2021-2026 Ford F-150 Raptor with the 3.5L V6 and 2023-2026 F-150 Raptor R with the 5.2L V8, automatic transmission, 2WD and 4WD, crew cab with the 5 ft 6 in. short bed (145.4 in. wheelbase). Fitment confirmed against Borla's published application list.
Guides & Manuals
Installation InstructionsInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor 3.5L V6, crew cab short bed |
| 2023-2026 | Ford | F-150 | Raptor R 5.2L V8, crew cab short bed |
Borla's 3 in. tail pipe kit with Brawler-style tips is made for the 2021-2026 Ford F-150 Raptor and the 2023-2026 F-150 Raptor R. The standout is the single 5 in. round angle-cut tip on each pipe, finished in a durable high-temperature black coating over T-304 stainless steel, with the Borla logo laser cut into the bottom wall of the tip.
A bold, angle-cut tip. Borla describes this as a unique Brawler style tip, and the 5 in. diameter with its angle cut sets this kit apart from the black chrome and carbon fiber versions of the same tail pipe.
Sound level goes up. Where these pipes replace original tail pipes with resonators or resonated tips, expect a louder exhaust. Ultra-smooth mandrel bends keep the flow path clean.
Stainless where it counts. The pipes are T-304 stainless steel, which Borla rates above T-400 series grades such as 409 for performance and durability. Heat shields are included on the pipes, CNC manufacturing keeps the fit accurate, and the Million-Mile Warranty covers each tail pipe.
Works with your exhaust. Pair the tail pipes with Borla mid-section / muffler assemblies 60728, 60736 or 60737, or keep the original mid-section / muffler assembly.
Features
- Pipe diameter: 3 in. T-304 stainless steel
- Tips: single 5 in. round Brawler style, angle cut, high-temperature black coating
- Laser-cut Borla logo in the bottom wall of each tip
- Tip exit: truck single split rear exit
- Heat shields included on the pipes
- Fits with Borla 60728, 60736 or 60737 mid-sections, or the O.E. mid-section
- Black chrome and carbon fiber tip versions are also offered by Borla
Prop 65 warning: operations such as welding or cutting on this product may expose you to chemicals including chromium, nickel, cobalt, arsenic, cadmium and lead, which are known to the State of California to cause cancer, birth defects and other reproductive harm.
Fitment: 2021-2026 Ford F-150 Raptor with the 3.5L V6 and 2023-2026 F-150 Raptor R with the 5.2L V8, automatic transmission, 2WD and 4WD, crew cab with the 5 ft 6 in. short bed (145.4 in. wheelbase). Fitment confirmed against Borla's published application list.
Guides & Manuals
Installation InstructionsInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor 3.5L V6, crew cab short bed |
| 2023-2026 | Ford | F-150 | Raptor R 5.2L V8, crew cab short bed |
These Borla 3 in. tail pipes replace the factory tail pipes on the 2021-2026 Ford F-150 Raptor and the 2023-2026 F-150 Raptor R. Each pipe finishes in a single 4.5 in. round black chrome tip on T-304 stainless steel, which gives the rear of the truck a dark, understated look.
Louder than the factory resonated pipes. When these pipes replace original tail pipes that have resonators or resonated tips, the sound level increases. Borla's mandrel bends keep the exhaust path smooth, so the added volume comes with strong flow.
Built to last. The pipes are T-304 stainless steel, which Borla rates above T-400 series grades such as 409 for performance and durability. CNC manufacturing keeps the fit accurate, heat shields are included on the pipes, and Borla backs each tail pipe with its Million-Mile Warranty.
Care for the black chrome tips. Borla does not recommend its Stainless Steel Polish (21499) on black chrome. Clean the tips with hot water and a microfiber cloth instead.
Choose your mid-section. The tail pipes fit with Borla mid-section / muffler assemblies 60728, 60736 or 60737, or with the original mid-section / muffler assembly.
Features
- Pipe diameter: 3 in. T-304 stainless steel
- Tips: single 4.5 in. round black chrome on T-304 stainless
- Tip exit: truck single split rear exit
- Heat shields included on the pipes
- Fits with Borla 60728, 60736 or 60737 mid-sections, or the O.E. mid-section
- Brawler-style black coated tips and carbon fiber tips are also offered by Borla
Prop 65 warning: operations such as welding or cutting on this product may expose you to chemicals including chromium, nickel, cobalt, arsenic, cadmium and lead, which are known to the State of California to cause cancer, birth defects and other reproductive harm.
Fitment: 2021-2026 Ford F-150 Raptor with the 3.5L V6 and 2023-2026 F-150 Raptor R with the 5.2L V8, automatic transmission, 2WD and 4WD, crew cab with the 5 ft 6 in. short bed (145.4 in. wheelbase). Fitment confirmed against Borla's published application list.
Guides & Manuals
Installation InstructionsInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor 3.5L V6, crew cab short bed |
| 2023-2026 | Ford | F-150 | Raptor R 5.2L V8, crew cab short bed |
The aFe Scorcher GT Power Module is a plug-and-play electronic module that raises turbo boost on the twin-turbo 3.5L EcoBoost V6 to improve power, throttle response and drivability. It plugs into the truck's factory sensor connectors, does not modify the ECU and leaves no trace on it, and installs in about 30 minutes. In aFe's dyno testing on a 3.5L F-150, race mode gained 56 HP and 62 lb-ft of torque at 4,700 RPM.
Direct plug-and-play power. The module works by altering the pressure sensor signals the engine computer sees so the turbos build more boost. Factory-style connectors plug straight into the stock harness, so nothing in the wiring has to be cut or spliced.
Four power settings on the fly. A small LED switch mounts anywhere in the cabin. One button steps through Stock (green), Sport (yellow), Sport+ (orange) and Race (red), so you can drop back to a mild setting for daily driving or towing.
Built to last. The module sits in a black powder-coated aluminum extrusion case with a quality wire harness. aFe tests 100 percent of the units for proper protection, and the module works on stock trucks and alongside other aFe POWER performance products.
Use it sensibly. aFe does not recommend running the Scorcher GT with any other tuner or module, and recommends the Sport or Sport+ setting when towing.
Features
- Plug-and-play install, about 30 minutes, no modifications
- Increases turbo boost for more power and quicker throttle response
- In-cabin LED switch with 4 power positions: Stock, Sport, Sport+ and Race
- No footprint on the ECU
- High-quality case and wire harness with OEM-style connectors
Emissions
aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the Scorcher GT for the 2021-2026 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6, along with 2021-2026 F-150 2.7L and 3.5L trucks, the 2021-2026 Bronco 2.7L and the 2022-2026 Expedition and Navigator 3.5L. aFe does not list it for the 2023-2026 F-150 Raptor R. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor 3.5L V6 EcoBoost |
| 2021-2026 | Ford | F-150 | 3.5L V6 EcoBoost |
| 2021-2026 | Ford | F-150 | 2.7L V6 EcoBoost |
| 2021-2026 | Ford | F-150 | 3.5L V6 PowerBoost Hybrid |
| 2021-2026 | Ford | Bronco | 2.7L V6 EcoBoost |
| 2022-2026 | Ford | Expedition | 3.5L V6 EcoBoost |
| 2022-2026 | Lincoln | Navigator | 3.5L V6 EcoBoost |
The aFe Sprint Booster V3 Power Converter sharpens the throttle response of a drive-by-wire Ford truck. Modern trucks translate pedal travel into an electronic signal, and that system can feel slow off the line, on hill starts and when you are passing. The Sprint Booster sits between the accelerator pedal and the truck's electronics and changes how quickly the truck responds to your foot, so the power you already have arrives sooner. It is designed for trucks with automatic transmissions.
Plug-and-play installation. The module plugs into the factory connector behind the accelerator pedal. No wires are cut and no other electronics, such as fuel injection or ABS, are affected. The compact control switch mounts inside the cabin where you can reach it.
Three modes, eighteen programs. Press the main button to cycle the modes. With the LED off the Sprint Booster is deactivated and the truck behaves as it did from the factory. Sport mode (green LED) improves response by up to 30 percent, and Race mode (red LED) by up to 60 percent. Each of Sport and Race has nine programs, from 1 (gentlest) to 9 (most aggressive), so you can tune each mode to your driving style.
Valet and Pedal Lock modes. Valet mode limits acceleration by 55, 65 or 75 percent and Pedal Lock disables acceleration altogether. Both are controlled with a three-digit PIN, which helps protect the truck from unauthorized use.
Better drivability. Besides crisper response for downshifts and passing, aFe notes a noticeable improvement in the shifts of automatic transmissions.
Features
- Plug-and-play at the connector behind the accelerator pedal, no cutting or splicing
- Ultra-compact in-cabin control switch
- 3 acceleration modes with 18 acceleration programs
- Valet and Pedal Lock modes protected by a PIN
- For automatic transmissions
Emissions
aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the Sprint Booster V3 for the 2010-2014 F-150 SVT Raptor (5.4L in 2010, 6.2L V8 2010-2014), the 2017-2026 F-150 Raptor 3.5L EcoBoost, the 2023-2026 F-150 Raptor R 5.2L supercharged V8, the 2022-2026 Bronco Raptor 3.0L EcoBoost and the 2024-2026 Ranger Raptor 3.0L EcoBoost, along with many other Ford trucks and vans. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010 | Ford | F-150 | SVT Raptor 5.4L V8 |
| 2010-2014 | Ford | F-150 | SVT Raptor 6.2L V8 |
| 2017-2026 | Ford | F-150 | Raptor 3.5L V6 EcoBoost |
| 2023-2026 | Ford | F-150 | Raptor R 5.2L V8 Supercharged |
| 2022-2026 | Ford | Bronco | Raptor 3.0L V6 EcoBoost |
| 2024-2026 | Ford | Ranger | Raptor 3.0L V6 EcoBoost |
This replacement vent tube insert is made for aFe POWER cold air intake systems on the Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6. It pushes into the vent fitting on the factory tube so the engine still pulls the right amount of vacuum after an aFe intake is installed. If you lose or break the original insert, this part replaces it.
Helps prevent the P04DB check engine light. With the insert in place the vent fitting draws the ideal amount of vacuum after the intake is fitted, which keeps the P04DB code from appearing. Refer to the intake's installation manual for the correct way to fit it.
Durable nylon construction. The insert is injection molded from nylon, so it is durable and easy to install. It is a direct replacement for aFe part number 05-01405.
Made for aFe intakes. aFe designed this insert for its own cold air intake systems and does not recommend it with any other intake.
Features
- Prevents the P04DB check engine light after installing an aFe intake
- Direct replacement for lost or broken vent inserts (replaces 05-01405)
- Injection-molded nylon construction
- For aFe POWER cold air intake systems on 3.5L EcoBoost F-150 and Raptor trucks
Emissions
aFe states this product does not require a CARB EO number.
Fitment: aFe lists this vent insert for the 2017-2026 Ford F-150 Raptor and the 2016-2026 Ford F-150 with the 3.5L V6 twin-turbo EcoBoost. It is not listed for the 2023-2026 Raptor R. Fitment confirmed against aFe's published application list.
Guides & Manuals
Vent Insert Tube Tech Tip (video)This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2016-2026 | Ford | F-150 | 3.5L V6 EcoBoost |
This aFe POWER Track Series cold air intake replaces the factory airbox and intake tube on the 2017-2026 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6. A carbon fiber tube with a blue Kevlar weave feeds a large pre-oiled Pro 5R filter inside an open-element housing, so the Raptor gets more airflow, a louder induction sound and a bold look under the hood.
Dyno-proven airflow. aFe measured 885 CFM at 7 in. of water, about 70% more than the factory intake, with dyno-proven gains of up to +18 HP and +17 lb-ft of torque.
Five-layer Pro 5R filter. The 9 in. tall, 360-degree radial flow filter has a 5-1/2 in. flange and five layers of progressively finer cotton gauze media. It passes the most air and gives the biggest gains in most cases, and it suits street and track use. The inverted top adds filter surface area for longer service intervals.
Carbon fiber and blue Kevlar tube. The lightweight twill weave tube combines carbon fiber and blue Kevlar with no fiberglass. It was computer designed and tested on the dyno to improve airflow, cut weight and dress up the engine bay.
One-piece housing with a cold-air scoop. The open-element XLPE (cross-linked polyethylene) housing keeps hot engine-bay air away from the filter. Its built-in scoop pulls cool air from the top of the radiator support, and the open design lets you see the filter.
Direct bolt-on install. Factory mounting locations are used, so there is no cutting or drilling. Stainless-steel clamps and flexible silicone couplers are included.
Features
- Carbon fiber tube with blue Kevlar, no fiberglass
- Pro 5R filter: pre-oiled, washable and reusable
- Open-element XLPE housing with built-in cold-air scoop
- Measured flow 885 CFM at 7 in. H2O, 70% more than stock
- Dyno-proven gains of up to +18 HP and +17 lb-ft of torque
- Stainless-steel clamps and silicone couplers included
- Uses factory mounting locations, no cutting or drilling
Emissions
aFe states this product is not currently CARB exempt. It is not available for purchase in California or for use on any vehicle registered with the California DMV.
Fitment: aFe lists this intake for the 2017-2026 Ford F-150 Raptor with the 3.5L V6 twin-turbo EcoBoost, plus other 2017-2026 F-150 trucks with that engine and the 2018-2026 Expedition and Navigator. It will not fit an F-150 with the 3.5L PowerBoost hybrid. It is not listed for the 2023-2026 Raptor R. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-150 | Raptor |
| 2017-2026 | Ford | F-150 | 3.5L V6 EcoBoost |
| 2018-2026 | Ford | Expedition | 3.5L V6 EcoBoost |
| 2018-2026 | Lincoln | Navigator | 3.5L V6 EcoBoost |
This aFe POWER Track Series cold air intake replaces the factory airbox and intake tube on the 2021-2026 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6. A 100% twill weave carbon fiber tube feeds a large, pre-oiled black Pro 5R filter inside an open-element housing, so the Raptor gets more airflow, a louder induction sound and a cleaner look under the hood.
Dyno-proven airflow. aFe measured 885 CFM at 7 in. of water, about 70% more than the factory intake, with dyno-proven gains of up to +18 HP and +17 lb-ft of torque.
Five-layer Pro 5R filter. The 9 in. tall, 360-degree radial flow filter has a 5-1/2 in. flange and five layers of progressively finer cotton gauze media. It passes the most air and gives the biggest gains in most cases, and it suits street and track use. The inverted top adds filter surface area for longer service intervals.
One-piece housing with a cold-air scoop. The open-element XLPE (cross-linked polyethylene) housing keeps hot engine-bay air away from the filter. Its built-in scoop pulls cool air from the top of the radiator support, and the open design lets you see the filter.
Carbon fiber intake tube. The tube is computer designed, clear-coated and made from 100% twill weave carbon fiber with no fiberglass, so it is light and fits the way the factory tube does.
Direct bolt-on install. Factory mounting locations are used, so there is no cutting or drilling. Stainless-steel clamps and flexible silicone couplers are included.
Features
- 100% twill weave carbon fiber intake tube, no fiberglass
- Black Pro 5R filter: pre-oiled, washable and reusable
- Open-element XLPE housing with built-in cold-air scoop
- Measured flow 885 CFM at 7 in. H2O, 70% more than stock
- Dyno-proven gains of up to +18 HP and +17 lb-ft of torque
- Stainless-steel clamps and silicone couplers included
- Uses factory mounting locations, no cutting or drilling
Emissions
aFe states this product is not currently CARB exempt. It is not available for purchase in California or for use on any vehicle registered with the California DMV.
Fitment: aFe lists this intake for the 2021-2026 Ford F-150 Raptor with the 3.5L V6 twin-turbo EcoBoost, plus other 2021-2026 F-150 trucks with that engine and the 2022-2026 Expedition and Navigator. It will not fit an F-150 with the 3.5L PowerBoost hybrid. It is not listed for the 2023-2026 Raptor R. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | 3.5L V6 EcoBoost |
| 2022-2026 | Ford | Expedition | 3.5L V6 EcoBoost |
| 2022-2026 | Lincoln | Navigator | 3.5L V6 EcoBoost |
This aFe POWER Track Series cold air intake replaces the factory airbox and intake tube on the 2021-2026 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6. A 100% twill weave carbon fiber tube feeds a large, oil-free Pro DRY S filter inside an open-element housing, so the Raptor gets more airflow, a louder induction sound and a cleaner look under the hood.
Dyno-proven airflow. aFe measured 870 CFM at 7 in. of water, about 67% more than the factory intake, with dyno-proven gains of up to +17 HP and +16 lb-ft of torque.
Large oil-free filter. The 9 in. tall, 360-degree radial flow filter has a 5-1/2 in. flange and three layers of synthetic media. It needs no filter oil, washes clean and can be reused, and it is best suited to street driving. The inverted top adds filter surface area for longer service intervals.
One-piece housing with a cold-air scoop. The open-element XLPE (cross-linked polyethylene) housing keeps hot engine-bay air away from the filter. Its built-in scoop pulls cool air from the top of the radiator support, and the open design lets you see the filter.
Carbon fiber intake tube. The tube is computer designed, clear-coated and made from 100% twill weave carbon fiber with no fiberglass, so it is light and fits the way the factory tube does.
Direct bolt-on install. Factory mounting locations are used, so there is no cutting or drilling. Stainless-steel clamps and flexible silicone couplers are included.
Features
- 100% twill weave carbon fiber intake tube, no fiberglass
- Pro DRY S filter: oil-free, washable and reusable
- Open-element XLPE housing with built-in cold-air scoop
- Measured flow 870 CFM at 7 in. H2O, 67% more than stock
- Dyno-proven gains of up to +17 HP and +16 lb-ft of torque
- Stainless-steel clamps and silicone couplers included
- Uses factory mounting locations, no cutting or drilling
Emissions
aFe states this product is not currently CARB exempt. It is not available for purchase in California or for use on any vehicle registered with the California DMV.
Fitment: aFe lists this intake for the 2021-2026 Ford F-150 Raptor with the 3.5L V6 twin-turbo EcoBoost, plus other 2021-2026 F-150 trucks with that engine and the 2022-2026 Expedition and Navigator. It will not fit an F-150 with the 3.5L PowerBoost hybrid. It is not listed for the 2023-2026 Raptor R. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | 3.5L V6 EcoBoost |
| 2022-2026 | Ford | Expedition | 3.5L V6 EcoBoost |
| 2022-2026 | Lincoln | Navigator | 3.5L V6 EcoBoost |
The aFe Rapid Induction Cold Air Intake System with Pro 5R filters in brushed aluminum, part 52-10015RH, replaces the restrictive factory intake on the 2021-2026 Ford F-150 Raptor with the 3.5L EcoBoost twin-turbo V6. Two large oiled-cotton filters and two 3-1/2 inch mandrel-bent brushed aluminum tubes feed each turbo, and a brushed heat shield and cover give the engine bay a polished look. aFe lists gains of up to 11 hp and 14 lb-ft of torque, with flow up to 34% above the factory intake (measured at 695 CFM at 7 inches of water).
Two big filters for maximum airflow. The Pro 5R filters are 8 inches tall with 360-degree radial flow and five layers of progressively finer cotton gauze, pre-oiled for protection. They are washable and reusable, and aFe says the media suits street and track use.
Mandrel-bent tubes feed both turbos. Dual one-piece 3-1/2 inch brushed aluminum tubes carry unrestricted air from the filters to the turbos for better volumetric efficiency.
Heat shield and cover. A lightweight brushed aluminum heat shield snaps onto the top of the lower half of the factory air box, using factory mounting locations, to separate the filters from engine heat. A brushed aluminum cover finishes the look.
Straightforward install. Premium hardware and clamps are included and nothing on the factory parts has to be cut or drilled.
Features
- Dyno-proven gains up to +11 hp and +14 lb-ft of torque; outflows the factory intake by up to 34%
- Dual washable, reusable Pro 5R air filters, 8 in tall
- Large dual 3-1/2 in mandrel-bent brushed aluminum intake tubes
- One-piece brushed heat shield installs in a snap
- No cutting or drilling on OEM parts
Emissions
aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California DMV.
Fitment
Fitment: aFe lists the 2021-2026 Ford F-150 Raptor with the V6-3.5L (tt) EcoBoost engine. The 5.2L supercharged Raptor R is not listed. The same kit also fits the other 2021-2026 F-150 3.5L EcoBoost trucks, 2022-2026 Expedition and 2022-2026 Navigator listed below. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | V6-3.5L (tt) EcoBoost |
| 2022-2026 | Ford | Expedition | V6-3.5L (tt) EcoBoost |
| 2022-2026 | Lincoln | Navigator | V6-3.5L (tt) EcoBoost |
The aFe Dynamic Air Scoop (D.A.S.), part 52-10010S, is a molded black duct that feeds cooler outside air from the top of the front grille into the air intake of your 2021-2026 Ford F-150 Raptor with the 3.5L EcoBoost V6. Cooler air is denser air, and denser air gives the engine more to work with, which aFe designs the scoop to turn into stronger throttle response and more efficient running.
Pulls air from the coolest spot. The scoop reaches up to the grille opening so the intake breathes fresh ambient air instead of the hot air that collects in the engine bay.
Seals out hot engine air. A silicone seal on the inlet presses against the hood and blocks underhood heat from entering the intake path.
Built to take abuse. The scoop is molded from linear low-density polyethylene (LLDPE), an impact-resistant material that is also 100% recyclable.
Simple installation. It snaps into the air box and all required hardware is included, so nothing has to be cut, drilled or modified. aFe says it fits the factory intake system as well as aFe Rapid Induction and Quantum intake systems. It does not fit aFe Momentum or Magnum FORCE Stage-2 intakes.
Features
- Captures cool air from the top of the front grille for a faster, cooler intake charge
- Quickly snaps into the air box; all hardware included
- Silicone inlet seal blocks hot engine air
- Durable, impact-resistant LLDPE polymer construction
- Fits the factory intake and aFe Rapid Induction and Quantum intakes
Emissions
aFe states this product is not currently CARB exempt. It is not available for purchase in California or for use on any vehicle registered with the California DMV.
Fitment
Fitment: aFe lists the 2021-2026 Ford F-150 Raptor with the V6-3.5L (tt) EcoBoost engine. aFe also notes the scoop will not fit an F-150 with the 3.5L PowerBoost hybrid engine. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | V6-2.7L (tt) EcoBoost |
| 2021-2026 | Ford | F-150 | V6-3.5L (tt) EcoBoost |
| 2021-2026 | Ford | F-150 | V8-5.0L |
| 2021-2023 | Ford | F-150 | V6-3.3L |
| 2021 | Ford | F-150 | V6-3.0L (td) Power-Stroke |
The aFe POWER Rapid Induction cold air intake replaces the factory airbox and inlet tubing on the 2021-2026 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6. This version uses a pre-oiled Pro 5R filter for maximum flow. aFe rates it at 765 CFM at 7 in H2O, says it outflows the factory intake by 72%, and shows dyno gains of up to +18 HP and +17 lb-ft of torque.
Heat shield that keeps the air cool. A powder-coated one-piece heat shield snaps onto the top of the lower half of the factory airbox, uses the factory mounting locations and keeps the filter in a shielded pocket away from hot engine air.
Pre-oiled Pro 5R media. The 5-3/4 in tall 360-degree radial-flow filter has a 5-1/2 in flange and five layers of progressively finer cotton gauze. aFe says it passes the largest amount of air and delivers the highest power gains in most cases, and rates it for street and track use. The inverted top adds filter surface area for longer service intervals, and the filter is washable and reusable.
Dyno-tuned tube. The computer-designed roto-molded tube is made of heat-resistant cross-linked polyethylene (XLPE) and keeps a factory-quality fit while delivering the power gains.
Direct bolt-on install. The system needs no cutting or drilling on factory parts. Stainless-steel clamps and a silicone coupling are included. aFe also offers an optional Dynamic Air Scoop (52-10010S black, 52-10010SR red, 52-10010SL blue) and Intake Cover (54-32648-B) for this system.
Features
- Up to +18 HP and +17 lb-ft on aFe's dyno
- Flows 765 CFM at 7 in H2O, 72% more than the factory intake
- Washable, reusable Pro 5R air filter for maximum performance
- Powder-coated one-piece heat shield mounts to the lower half of the factory airbox
- Computer-designed roto-molded intake tube
- No cutting or drilling on OEM parts
- Stainless-steel clamps and silicone coupling included
Emissions: aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the 2021-2026 Ford F-150 Raptor with the V6-3.5L (tt) EcoBoost. The 5.2L supercharged Raptor R is not listed. aFe also lists the 2021-2026 F-150 3.5L EcoBoost, the 2022-2026 Expedition and the 2022-2026 Lincoln Navigator with the same engine. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | V6-3.5L (tt) EcoBoost |
| 2022-2026 | Ford | Expedition | V6-3.5L (tt) EcoBoost |
| 2022-2026 | Lincoln | Navigator | V6-3.5L (tt) EcoBoost |
The aFe POWER Rapid Induction cold air intake replaces the factory airbox and inlet tubing on the 2021-2026 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6. This version uses an oil-free Pro DRY S filter. aFe rates it at 675 CFM at 7 in H2O, says it outflows the factory intake by 52%, and shows dyno gains of up to +14 HP and +15 lb-ft of torque.
Heat shield that keeps the air cool. A powder-coated one-piece heat shield snaps onto the top of the lower half of the factory airbox, uses the factory mounting locations and keeps the filter in a shielded pocket away from hot engine air.
Oil-free Pro DRY S media. The 5-3/4 in tall 360-degree radial-flow filter has a 5-1/2 in flange and three layers of synthetic media that filter well and hold dust without oil. aFe rates it for street use. The inverted top adds filter surface area for longer service intervals, and the filter is washable and reusable.
Dyno-tuned tube. The computer-designed roto-molded tube is made of heat-resistant cross-linked polyethylene (XLPE) and keeps a factory-quality fit while delivering the power gains.
Direct bolt-on install. The system needs no cutting or drilling on factory parts. Stainless-steel clamps and a silicone coupling are included. aFe also offers an optional Dynamic Air Scoop (52-10010S black, 52-10010SR red, 52-10010SL blue) and Intake Cover (54-32648-B) for this system.
Features
- Up to +14 HP and +15 lb-ft on aFe's dyno
- Flows 675 CFM at 7 in H2O, 52% more than the factory intake
- Washable, reusable Pro DRY S air filter, no oil required
- Powder-coated one-piece heat shield mounts to the lower half of the factory airbox
- Computer-designed roto-molded intake tube
- No cutting or drilling on OEM parts
- Stainless-steel clamps and silicone coupling included
Emissions: aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the 2021-2026 Ford F-150 Raptor with the V6-3.5L (tt) EcoBoost. The 5.2L supercharged Raptor R is not listed. aFe also lists the 2021-2026 F-150 3.5L EcoBoost, the 2022-2026 Expedition and the 2022-2026 Lincoln Navigator with the same engine. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | V6-3.5L (tt) EcoBoost |
| 2022-2026 | Ford | Expedition | V6-3.5L (tt) EcoBoost |
| 2022-2026 | Lincoln | Navigator | V6-3.5L (tt) EcoBoost |
The aFe POWER Momentum XP cold air intake replaces the factory air box and inlet tubes on the 2021-2026 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6. This version has black tubes and a pre-oiled Pro 5R filter. aFe's flow bench measured 565 CFM against 445 CFM for the stock intake, 27% more airflow, and its dyno testing showed gains of up to +9 HP and +12 lb-ft of torque.
The largest filter that fits. The housing was designed around the biggest air filter possible: a 9 in tall, pre-oiled 360-degree radial-flow filter with two 3 in inlets. Its inverted top and large surface area give long life between cleanings.
Pre-oiled Pro 5R media. Five layers of progressively finer cotton gauze deliver high filtration and flow. aFe rates this media for street use. The filter is washable and reusable.
One-piece sealed housing. The housing is heat-resistant cross-linked polyethylene (XLPE) with a large clear sight window to check the filter without taking anything apart. It incorporates the factory hood inlet scoop and grille air inlet, and a silicone seal at the inlet seals to the hood to keep hot engine air out.
Dual 3 in intake tubes. Two mandrel-bent, wrinkle-black powder-coated aluminum tubes carry air from the filter to the turbos, with a balance hose connecting them. Stainless worm-gear clamps and silicone couplings give a secure, flexible seal. The system uses fewer parts for a quick install.
Features
- Up to +9 HP and +12 lb-ft on aFe's dyno
- Flows 565 CFM at 7 in H2O, 27% over the factory intake
- Washable, reusable pre-oiled Pro 5R air filter
- 3 in mandrel-bent wrinkle-black aluminum intake tubes
- Sealed housing with factory hood inlet scoop and grille inlet
- Large clear sight window for filter inspection
- Stainless clamps and silicone couplings
Emissions: aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the 2021-2026 Ford F-150 Raptor with the V6-3.5L (tt) EcoBoost. The 5.2L supercharged Raptor R is not listed. aFe also lists the 2021-2026 F-150 3.5L EcoBoost and PowerBoost, 2022-2026 Expedition and 2022-2026 Lincoln Navigator. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | V6-3.5L (tt) EcoBoost and PowerBoost hybrid |
| 2022-2026 | Ford | Expedition | V6-3.5L (tt) EcoBoost |
| 2022-2026 | Lincoln | Navigator | V6-3.5L (tt) EcoBoost |
The aFe POWER Momentum XP cold air intake replaces the factory air box and inlet tubes on the 2021-2026 Ford F-150 Raptor with the 3.5L twin-turbo EcoBoost V6. This version has black tubes and an oil-free Pro DRY S filter. aFe's flow bench measured 540 CFM against 445 CFM for the stock intake, 21% more airflow, and its dyno testing showed gains of up to +7 HP and +9 lb-ft of torque.
The largest filter that fits. The housing was designed around the biggest air filter possible: a 9 in tall, 360-degree radial-flow filter with two 3 in inlets. Its inverted top adds filter surface area for longer service intervals.
Oil-free Pro DRY S media. Three layers of synthetic media filter well and hold dust without oil, so there is no oiling step after cleaning. aFe rates this media for street and light off-road use. The filter is washable and reusable.
One-piece sealed housing. The housing is heat-resistant cross-linked polyethylene (XLPE) with a large clear sight window to check the filter without taking anything apart. It incorporates the factory hood inlet scoop and grille air inlet, and a silicone seal at the inlet seals to the hood to keep hot engine air out.
Dual 3 in intake tubes. Two mandrel-bent, wrinkle-black powder-coated aluminum tubes carry air from the filter to the turbos, with a balance hose connecting them. Stainless worm-gear clamps and silicone couplings give a secure, flexible seal. The system uses fewer parts for a quick install.
Features
- Up to +7 HP and +9 lb-ft on aFe's dyno
- Flows 540 CFM at 7 in H2O, 21% over the factory intake
- Washable, reusable Pro DRY S air filter, no oil required
- 3 in mandrel-bent wrinkle-black aluminum intake tubes
- Sealed housing with factory hood inlet scoop and grille inlet
- Large clear sight window for filter inspection
- Stainless clamps and silicone couplings
Emissions: aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the 2021-2026 Ford F-150 Raptor with the V6-3.5L (tt) EcoBoost. The 5.2L supercharged Raptor R is not listed. aFe also lists the 2021-2026 F-150 3.5L EcoBoost and PowerBoost, 2022-2026 Expedition and 2022-2026 Lincoln Navigator. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | V6-3.5L (tt) EcoBoost and PowerBoost hybrid |
| 2022-2026 | Ford | Expedition | V6-3.5L (tt) EcoBoost |
| 2022-2026 | Lincoln | Navigator | V6-3.5L (tt) EcoBoost |
The aFe POWER BladeRunner hot and cold charge pipe kit replaces the factory charge pipes on the 2021-2026 Ford F-150 Raptor and its 3.5L twin-turbo EcoBoost V6. aFe reports the hot side outflows the factory pipe by up to 13% and the cold side by up to 19%.
Smoother flow, lower temperatures. Mandrel-bent aluminum pipes with smooth transitions decrease turbulence and pressure loss. aFe says the kit gives a smoother path between the turbos and the engine for lower operating temperatures and more power.
Premium hardware. The kit includes stainless-steel, spring-loaded T-bolt clamps and heavy-duty 5-ply, polyester-reinforced silicone couplings. A factory-style billet aluminum quick-connect adapter with an O-ring seal keeps the connection leak-free.
Finish and sensor ports. The pipes are powder coated in wrinkle black for heat and corrosion resistance and carry a laser-etched aFe POWER logo. 1/8 in NPT ports are provided for sensors or water-methanol injection.
Features
- Hot side outflows the factory charge pipe by up to 13%
- Cold side outflows the factory charge pipe by up to 19%
- TIG-welded 2-1/2 in hot side and 3 in to 3-1/2 in cold side aluminum pipes
- Factory-style quick-connect with an O-ring seal
- Stainless-steel spring-loaded T-bolt clamps and 5-ply silicone couplings
- 1/8 in NPT ports for sensors or water-methanol injection
- Wrinkle black powder coat for heat and corrosion resistance
Emissions: aFe states this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment: aFe lists the 2021-2026 Ford F-150 Raptor with the V6-3.5L (tt) EcoBoost, plus the 2021-2026 F-150 with the same engine; the 5.2L supercharged Raptor R is not listed. aFe notes it does not fit PowerBoost models. Fitment confirmed against aFe's published application list.
Guides & Manuals
Installation InstructionsInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | All trims, V6-3.5L (tt) EcoBoost (not PowerBoost) |
The aFe Magnum FLOW Pro DRY S is a drop-in replacement for the factory air filter on the Ford F-150 Raptor. It fits the stock airbox with no changes and uses a dry synthetic element in place of Ford's paper filter, so there is no oil to apply or to worry about near the sensors.
Three layers of dry synthetic media. The Pro DRY S media is built from three progressively layered, oil-free sheets. aFe describes it as the easiest of its performance filters to maintain and best suited to street use. aFe's airflow chart for this filter shows 780 CFM against 587 CFM for the stock filter, measured at 1.5 in. H2O.
Deep, rounded pleats. The evenly spaced, open pleats give more usable surface area, which supports flow and dust-holding capacity between services.
Progressive bump seal. The soft sealing surface conforms to the airbox, even where it is uneven, so you get a tight, leak-free fit with no gaskets or sealant.
Full polyurethane frame. The frame is molded polyurethane on all sides, a material that keeps its shape through repeated heat cycles in the engine bay.
Washable and reusable. Clean it and recharge it with aFe POWER Cleaner for dry filters, let it dry, and refit it. It can be cleaned and reused for multiple cycles.
Features
- Three layers of progressive oil-free synthetic media (Pro DRY S)
- Drop-in fit in the factory airbox
- Deep, open, evenly spaced pleats for flow and dust capacity
- Progressive bump seal for a leak-free fit
- 100% polyurethane frame on all sides
- Washable and reusable for multiple cleaning cycles
Emissions. aFe states that this product does not require a CARB EO number.
Fitment: aFe lists this filter for the 2010 F-150 SVT Raptor with the 5.4L V8, the 2010-2014 SVT Raptor with the 6.2L V8, and the 2017-2025 F-150 Raptor with the 3.5L EcoBoost V6. It does not fit the F-150 Raptor R (5.2L supercharged V8), which uses a different air filter. Fitment confirmed against aFe's published application list.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2017-2025 | Ford | F-150 | Raptor |
| 2009-2010 | Ford | F-150 | V8-4.6L |
| 2009-2010 | Ford | F-150 | V8-5.4L |
| 2011-2014 | Ford | F-150 | V6-3.7L |
| 2011-2014 | Ford | F-150 | V8-6.2L |
| 2011-2025 | Ford | F-150 | V6-3.5L (tt) |
| 2011-2025 | Ford | F-150 | V8-5.0L |
| 2015-2025 | Ford | F-150 | V6-2.7L (tt) |
| 2018-2021 | Ford | F-150 | V6-3.0L (td) Diesel |
| 2018-2023 | Ford | F-150 | V6-3.3L |
| 2021-2025 | Ford | F-150 | V6-3.5L (tt) Hybrid |
| 2007-2014 | Ford | Expedition | V8-5.4L |
| 2015-2026 | Ford | Expedition | V6-3.5L (tt) |
| 2008-2010 | Ford | F-250 Super Duty | V10-6.8L |
| 2008-2010 | Ford | F-250 Super Duty | V8-5.4L |
| 2011-2016 | Ford | F-250 Super Duty | V8-6.2L |
| 2008-2010 | Ford | F-350 Super Duty | V10-6.8L |
| 2008-2010 | Ford | F-350 Super Duty | V8-5.4L |
| 2011-2016 | Ford | F-350 Super Duty | V8-6.2L |
| 2008-2016 | Ford | F-450 Super Duty | V10-6.8L |
| 2008-2016 | Ford | F-550 Super Duty | V10-6.8L |
| 2008-2014 | Ford | F53 | V10-6.8L |
| 2007-2014 | Lincoln | Navigator | V8-5.4L |
| 2015-2026 | Lincoln | Navigator | V6-3.5L (tt) |
The aFe Magnum FLOW Pro 5R is a drop-in replacement for the factory air filter on the Ford F-150 Raptor. It swaps straight into the stock airbox, so there is no intake to rework, and it uses a pre-oiled cotton gauze element in place of the paper filter Ford fits at the factory.
Five layers of pre-oiled cotton gauze. The Pro 5R media is built from five progressively finer layers that keep flowing even when the filter is dirty. aFe describes it as suited to street and track use, and the filter ships already oiled. aFe's page cites up to a 17 percent flow increase over stock.
Deep, rounded pleats. The evenly spaced, open pleats give the filter more usable surface area, which raises flow and lets it hold more dust between services.
Progressive bump seal. The soft sealing surface conforms to the airbox, even where it is uneven, so you get a tight fit without gaskets or sealant, and it returns to its original shape every time you refit it.
Full polyurethane frame. The frame is molded polyurethane on all sides. Unlike many materials, polyurethane holds its shape through repeated heat cycles in the engine bay.
Washable and reusable. When it is dirty, clean it with aFe POWER Cleaner and recharge it with aFe's blue filter oil. It can be cleaned and reused for multiple cycles.
Features
- Five layers of progressive, pre-oiled cotton gauze media (Pro 5R)
- Drop-in fit in the factory airbox
- Deep, open, evenly spaced pleats for flow and dust capacity
- Progressive bump seal for a leak-free fit
- 100% polyurethane frame on all sides
- Washable and reusable for multiple cleaning cycles
Emissions. aFe states that this product does not require a CARB EO number.
Fitment: aFe lists this filter for the 2010 F-150 SVT Raptor with the 5.4L V8, the 2010-2014 SVT Raptor with the 6.2L V8, and the 2017-2025 F-150 Raptor with the 3.5L EcoBoost V6. It does not fit the F-150 Raptor R (5.2L supercharged V8), which uses a different air filter. Fitment confirmed against aFe's published application list.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2017-2025 | Ford | F-150 | Raptor |
| 2009-2010 | Ford | F-150 | V8-4.6L |
| 2009-2010 | Ford | F-150 | V8-5.4L |
| 2011-2014 | Ford | F-150 | V6-3.7L |
| 2011-2014 | Ford | F-150 | V8-6.2L |
| 2011-2025 | Ford | F-150 | V6-3.5L (tt) |
| 2011-2025 | Ford | F-150 | V8-5.0L |
| 2015-2025 | Ford | F-150 | V6-2.7L (tt) |
| 2018-2021 | Ford | F-150 | V6-3.0L (td) Diesel |
| 2018-2023 | Ford | F-150 | V6-3.3L |
| 2021-2025 | Ford | F-150 | V6-3.5L (tt) Hybrid |
| 2007-2014 | Ford | Expedition | V8-5.4L |
| 2015-2026 | Ford | Expedition | V6-3.5L (tt) |
| 2008-2010 | Ford | F-250 Super Duty | V10-6.8L |
| 2008-2010 | Ford | F-250 Super Duty | V8-5.4L |
| 2011-2016 | Ford | F-250 Super Duty | V8-6.2L |
| 2008-2010 | Ford | F-350 Super Duty | V10-6.8L |
| 2008-2010 | Ford | F-350 Super Duty | V8-5.4L |
| 2011-2016 | Ford | F-350 Super Duty | V8-6.2L |
| 2008-2016 | Ford | F-450 Super Duty | V10-6.8L |
| 2008-2016 | Ford | F-550 Super Duty | V10-6.8L |
| 2008-2014 | Ford | F53 | V10-6.8L |
| 2007-2014 | Lincoln | Navigator | V8-5.4L |
| 2015-2026 | Lincoln | Navigator | V6-3.5L (tt) |
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2017 | Ford | Expedition | EL King Ranch |
| 2015-2017 | Ford | Expedition | EL Limited |
| 2015-2017 | Ford | Expedition | EL Platinum |
| 2016-2017 | Ford | Expedition | EL SSV |
| 2015-2017 | Ford | Expedition | EL XL |
| 2015-2017 | Ford | Expedition | EL XLT |
| 2015-2017,2020-2021 | Ford | Expedition | King Ranch |
| 2015-2021 | Ford | Expedition | Limited |
| 2020-2021 | Ford | Expedition | Max King Ranch |
| 2018-2021 | Ford | Expedition | Max Limited |
| 2018-2021 | Ford | Expedition | Max Platinum |
| 2018-2021 | Ford | Expedition | Max SSV |
| 2018-2019 | Ford | Expedition | Max XL |
| 2018-2021 | Ford | Expedition | Max XLT |
| 2015-2021 | Ford | Expedition | Platinum |
| 2016-2021 | Ford | Expedition | SSV |
| 2015-2019 | Ford | Expedition | XL |
| 2015-2021 | Ford | Expedition | XLT |
| 2013-2014 | Ford | F-150 | FX2 |
| 2013-2014 | Ford | F-150 | FX4 |
| 2013-2021 | Ford | F-150 | King Ranch |
| 2013-2021 | Ford | F-150 | Lariat |
| 2013-2014,2016-2021 | Ford | F-150 | Limited |
| 2013-2021 | Ford | F-150 | Platinum |
| 2018-2021 | Ford | F-150 | Police Responder |
| 2017-2021 | Ford | F-150 | Raptor |
| 2016-2021 | Ford | F-150 | SSV |
| 2013-2014 | Ford | F-150 | STX |
| 2013-2014 | Ford | F-150 | SVT Raptor |
| 2013-2021 | Ford | F-150 | XL |
| 2013-2021 | Ford | F-150 | XLT |
This Stainless Works catback replaces the factory rear exhaust on the 2021-2026 Ford F-150 Raptor (3.5L EcoBoost) and the 2023-2026 Raptor R (5.2L supercharged V8). It uses 3 inch 304 stainless piping with an X-pipe crossover and ends in dual 4 inch matte black slash-cut conical tips.
Keeps the factory valves. The system is compatible with the factory active exhaust valves, so Quiet, Normal, Sport and Baja modes keep working.
Direct bolt-on. The system bolts to the factory connection points. The pipes are mandrel bent and TIG welded, and Stainless Works builds each system to order, listing about 4 weeks.
Lifetime warranty. Stainless Works backs the system with a lifetime warranty.
What is in the kit. Lead pipes, X-pipe, two mufflers, tail pipes, hangers, 3 inch clamps, valve springs and clips, extensions, two matte black tips and installation instructions.
Features
- 3 inch 304 stainless piping with X-pipe crossover
- Dual 4 inch matte black slash-cut conical tips
- Compatible with the factory active exhaust valves
- Direct bolt-on, mandrel bent, TIG welded
- Lifetime warranty
Fitment: 2021-2026 Ford F-150 Raptor 3.5L EcoBoost and 2023-2026 Ford F-150 Raptor R 5.2L. Fitment confirmed against Stainless Works' published application list.
Guides & Manuals
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor 3.5L EcoBoost |
| 2023-2026 | Ford | F-150 | Raptor R 5.2L |
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2026 | Ford | F-150 | King Ranch |
| 2015-2026 | Ford | F-150 | Lariat |
| 2018-2023 | Ford | F-150 | Limited |
| 2015-2026 | Ford | F-150 | Platinum |
| 2018-2026 | Ford | F-150 | Police Responder |
| 2018-2026 | Ford | F-150 | Raptor |
| 2016-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2015-2026 | Ford | F-150 | XL |
| 2015-2026 | Ford | F-150 | XLT |
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2026 | Ford | F-150 | King Ranch |
| 2015-2026 | Ford | F-150 | Lariat |
| 2018-2023 | Ford | F-150 | Limited |
| 2015-2026 | Ford | F-150 | Platinum |
| 2018-2026 | Ford | F-150 | Police Responder |
| 2018-2026 | Ford | F-150 | Raptor |
| 2016-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2015-2026 | Ford | F-150 | XL |
| 2015-2026 | Ford | F-150 | XLT |
$429.99
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018-2023 | Ford | F-150 | King Ranch |
| 2018-2023 | Ford | F-150 | Lariat |
| 2018-2023 | Ford | F-150 | Limited |
| 2018-2023 | Ford | F-150 | Platinum |
| 2018-2023 | Ford | F-150 | Police Responder |
| 2018-2023 | Ford | F-150 | Raptor |
| 2018-2023 | Ford | F-150 | SSV |
| 2021-2023 | Ford | F-150 | Tremor |
| 2018-2023 | Ford | F-150 | XL |
| 2018-2023 | Ford | F-150 | XLT |
The MagnaFlow Ford F-150 D-Fit Muffler Replacement Kit Performance Exhaust System with Muffler #19572 is compatible with all 2015-2023 Ford F-150s, offering enthusiasts an easy way to upgrade their trucks with the deep signature sound and dyno-proven performance that MagnaFlow exhaust systems are famous for. This easy-to-install bolt-on solution is designed to clamp on to the stock break points and replaces the restrictive factory muffler with a MagnaFlow straight-through muffler while retaining the OEM piping and tailpipe. MagnaFlow #19572 is engineered to produce a moderate level of exterior sound, allowing you to enjoy the deep rumble of your truck's engine while maintaining mild noise levels in the vehicle's interior. The exhaust kit utilizes mandrel bent 3" tubing and is produced using CNC precision robotic manufacturing techniques. Each exhaust system features durable 100% stainless steel construction, all backed by a limited lifetime construction warranty.
- Maintains The OEM Piping And Tailpipe
- Mandrel Bent Stainless Steel Tubing
- 409 Stainless Steel Construction
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2026 | Ford | F-150 | King Ranch |
| 2015-2026 | Ford | F-150 | Lariat |
| 2016-2023 | Ford | F-150 | Limited |
| 2015-2026 | Ford | F-150 | Platinum |
| 2022 | Ford | F-150 | Police Responder |
| 2022 | Ford | F-150 | Raptor |
| 2016-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2022-2025 | Ford | F-150 | Tremor |
| 2015-2026 | Ford | F-150 | XL |
| 2015-2026 | Ford | F-150 | XLT |
The MagnaFlow Street Series Cat-Back Performance Exhaust System #19563 works seamlessly with all 2015-2023 and 2021+ engine variants of the Ford F-150. Enjoy the newly aggressive sound of your truck's motor with MagnaFlow's deep signature exhaust note and dyno proven performance improvements that can be heard and felt from the exterior of your truck to its interior. MagnaFlow #19563 features durable 100% stainless steel construction, a single straight-through muffler, 3" mandrel bent tubing and dual passenger-side exit before the rear tire with 3.5" polished tips. The latest CNC precision robotic manufacturing techniques are used to ensure that the exhaust kit's direct-fit design bolts on easily to enable hassle-free installation.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
- Dyno Proven Performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2026 | Ford | F-150 | King Ranch |
| 2015-2026 | Ford | F-150 | Lariat |
| 2016-2023 | Ford | F-150 | Limited |
| 2015-2026 | Ford | F-150 | Platinum |
| 2022 | Ford | F-150 | Police Responder |
| 2022 | Ford | F-150 | Raptor |
| 2016-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2022-2025 | Ford | F-150 | Tremor |
| 2015-2026 | Ford | F-150 | XL |
| 2015-2026 | Ford | F-150 | XLT |
The MagnaFlow Street Series Cat-Back Performance Exhaust System #19562 is compatible with all 2021-2023 engine variants of the Ford F-150. Enjoy the newly aggressive sound of your truck's motor, enhanced with MagnaFlow's deep signature exhaust tone and dyno proven performance improvements, all while maintaining only moderate levels of interior noise. MagnaFlow #19562 features durable 100% stainless steel construction, a single straight-through muffler, 3" mandrel bent tubing and dual-split rear exit 4" tips with black powder-coated finish. Cutting-edge CNC precision robotic manufacturing is used to ensure that the exhaust kit's direct-fit layout bolts on as intended for easy installation.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
- Dyno Proven Performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Platinum |
| 2022 | Ford | F-150 | Police Responder |
| 2022 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2022-2023,2025 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
The MagnaFlow Street Series Cat-Back Performance Exhaust System #19561 is compatible with all 2015-2023 and 2021+ engine variants of the Ford F-150. Enhance the sound of your truck's engine with MagnaFlow's deep signature exhaust note and dyno proven performance enhancements while maintaining only mild levels of interior noise. MagnaFlow #19561 features durable 100% stainless steel construction, a single straight-through muffler, 3" mandrel bent tubing, a single polished 4" tip and passenger-side exit. Cutting-edge CNC precision robotic manufacturing is used to ensure that the exhaust kit's direct-fit design bolts on easily for hassle-free installation.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
- Dyno Proven Performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2026 | Ford | F-150 | King Ranch |
| 2015-2026 | Ford | F-150 | Lariat |
| 2016-2023 | Ford | F-150 | Limited |
| 2015-2026 | Ford | F-150 | Platinum |
| 2022 | Ford | F-150 | Police Responder |
| 2022 | Ford | F-150 | Raptor |
| 2016-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2022-2025 | Ford | F-150 | Tremor |
| 2015-2026 | Ford | F-150 | XL |
| 2015-2026 | Ford | F-150 | XLT |
Kooks Headers and Exhaust has been the leader in the High Performance Exhaust Industry for over 50 Years! Since 1962, Kooks takes pride in offering the best Headers and complete exhaust systems for your street, race and off-road applications. We have won hundreds of championships and set countless records in the NHRA, IHRA, NMCA, NMRA, NASCAR, NASA, SCCA and many other racing organizations. Now with three generations of family leadership, we are proud to say that all of our products are handcrafted here in the USA and we are proud to still be independently owned and operated. And don't forget, "Get Kookin with KOOKS!"
- Manufactured In The USA. Kooks Uses T304 Aircraft Quality Stainless Steel. Kooks Products are Backed by a Limited Lifetime Warranty To the Original Purchaser. Kooks Products Are Dyno And Race Tested and Designed For Maximum Power.
- Kooks Products Are Backed By A Limited Lifetime Warranty To The Original Purchaser
- Kooks Products Are Dyno And Race Tested And Designed For Maximum Power
- Kooks Uses T304 Aircraft Quality Stainless Steel
- Manufactured In The USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2025 | Ford | F-150 | Raptor |
The Kooks 1372H430 is a set of 1-7/8 inch stainless steel long-tube headers with 3-inch green catted connections for the 5.2L supercharged V8 in the 2023-2027 Ford F-150 Raptor R. Kooks has built headers since 1962, and this set is made to order for the Raptor R.
Built to be freer-flowing. The headers use 304 stainless steel with 1-7/8 inch primary tubes that step to 3 inches, and the green catted connections tie them into the factory exhaust with 3-inch tubing.
Complete hardware. The kit includes all the hardware needed for installation. Kooks recommends O2 sensor spacers, part 9003A, which are sold separately.
Built to order. Each set is made when you order, with a ship window of about 6 to 8 weeks. Optional coatings add more time.
Features
- 304 stainless steel 1-7/8 inch headers
- 3-inch green catted connections
- All hardware included
- O2 spacers 9003A recommended (sold separately)
- Made to order by Kooks
Emissions
Kooks lists no CARB Executive Order for this header. Prop 65 warning applies.
Fitment: 2023-2027 Ford F-150 Raptor R with the 5.2L V8. Fitment confirmed against Kooks' published application list.
Guides & Manuals
Kooks Product Document (PDF)This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2027 | Ford | F-150 | Raptor R 5.2L V8 |
$19.19
Fel-Pro(R) gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
- Contains all gaskets and seals to remove and replace exhaust manifold
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form, and function
- Unsurpassed quality you can trust
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011-2014 | Ford | F-150 | FX2 |
| 2011-2014 | Ford | F-150 | FX4 |
| 2011-2023 | Ford | F-150 | King Ranch |
| 2011-2026 | Ford | F-150 | Lariat |
| 2011-2023 | Ford | F-150 | Platinum |
| 2024-2026 | Ford | F-150 | Raptor |
| 2016-2026 | Ford | F-150 | SSV |
| 2011-2014,2024-2026 | Ford | F-150 | STX |
| 2023-2026 | Ford | F-150 | Tremor |
| 2011-2026 | Ford | F-150 | XL |
| 2011-2026 | Ford | F-150 | XLT |
| 2012-2013 | Ford | Mustang | Boss 302 |
| 2019-2020 | Ford | Mustang | Bullitt |
| 2024-2025 | Ford | Mustang | Dark Horse |
| 2024-2025 | Ford | Mustang | Dark Horse Premium |
| 2011-2025 | Ford | Mustang | GT |
| 2015 | Ford | Mustang | GT 50 Years Limited Edition |
| 2015-2025 | Ford | Mustang | GT Premium |
| 2021-2023 | Ford | Mustang | Mach 1 |
The AWE SwitchPath Exhaust with 5-inch Diamond Black tips is a dual 3-inch cat-back system for the 2023-2026 Ford F-150 Raptor R with the 5.2L supercharged V8. It keeps the truck's factory valve operation and gives the Raptor R a more aggressive, free-flowing note whenever the valve is open.
Valved for comfort. A tier 1 OE valve works exactly like the factory one. It opens at the throttle threshold, with the interior button or with the drive modes. Close it for the highway or a cold start, and leave it open the rest of the time. AWE also includes an exhaust-mounted valve bracket for the unused factory valve motor, which keeps the ECU satisfied.
X marks the spot. A precision-engineered AWE X-pipe tailored to the 5.2L gives the Raptor R an aggressive, free-flowing sound.
Tailpipes included. The kit is a full cat-back with resonated tailpipes made for the 5.2L Raptor R. Dual 3-inch CNC mandrel-bent, U.S.-sourced .065-inch wall T304L stainless runs from front to back, topped with 5-inch double-walled, slash-cut Diamond Black tips.
Dyno-proven gains. AWE reports gains of up to 5 hp and 5 lb-ft of torque at the wheels.
Built in the USA. AWE designs and builds it in-house in Pennsylvania.
Features
- Dual 3-inch cat-back with bespoke SwitchPath muffler and resonated tailpipes
- Plug-and-play OE tier 1 valve with button, throttle and all four drive modes
- Tailored AWE X-pipe for the 5.2L
- 5-inch double-walled Diamond Black tips
- Exhaust-mounted valve motor simulator bracket
- Locking collars for the exhaust hangers
- No cutting required
- Lifetime warranty, Perfect Fitment Guarantee and No CEL Guarantee
Emissions. AWE lists this system as 50-state emissions compliant and says it does not interfere with factory emissions equipment. This product carries a California Prop 65 notice.
Fitment: 2023-2026 Ford F-150 Raptor R with the 5.2L engine, Crew Cab, 5 ft 6 in bed. Fitment confirmed against AWE Tuning's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2026 | Ford | F-150 | Raptor R (5.2L, Crew Cab) |
The AWE SwitchPath Exhaust with 5-inch Diamond Black tips is a dual 3-inch cat-back system for the 2021-2026 Ford F-150 Raptor with the 3.5L EcoBoost. It keeps the truck's factory valve operation, removes rasp from the twin-turbo V6 and gives the Raptor a fuller sound whenever the valve is open.
Valved for comfort. A tier 1 OE valve works exactly like the factory one. It opens at the throttle threshold, with the interior button or with the drive modes. Close it for the highway or a cold start, and leave it open the rest of the time. AWE also includes an exhaust-mounted valve bracket for the unused factory valve motor, which keeps the ECU satisfied.
X marks the spot. A precision-engineered AWE X-pipe smooths the 3.5TT's exhaust pulses and removes rasp, which AWE describes as the best-sounding six-cylinder Raptor note to date.
Tailpipes included. The kit is a full cat-back with resonated tailpipes made for the 3.5L Raptor. Dual 3-inch CNC mandrel-bent, U.S.-sourced .065-inch wall T304L stainless runs from front to back, topped with 5-inch double-walled, slash-cut Diamond Black tips.
Dyno-proven gains. AWE reports gains of up to 2 hp and 5 lb-ft of torque at the wheels.
Built in the USA. AWE designs and builds it in-house in Pennsylvania.
Features
- Dual 3-inch cat-back with bespoke SwitchPath muffler and resonated tailpipes
- Plug-and-play OE tier 1 valve with button, throttle and all four drive modes
- Tailored AWE X-pipe
- 5-inch double-walled Diamond Black tips
- Exhaust-mounted valve motor simulator bracket
- Locking collars for the exhaust hangers
- No cutting required
- Lifetime warranty, Perfect Fitment Guarantee and No CEL Guarantee
Emissions. AWE lists this system as 50-state emissions compliant and says it does not interfere with factory emissions equipment. This product carries a California Prop 65 notice.
Fitment: 2021-2026 Ford F-150 Raptor with the 3.5L engine, Crew Cab, 5 ft 6 in bed. Fitment confirmed against AWE Tuning's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor (3.5L, Crew Cab) |
The AWE SwitchPath Exhaust with 5-inch Chrome Silver tips is a dual 3-inch cat-back system for the 2023-2026 Ford F-150 Raptor R with the 5.2L supercharged V8. It keeps the truck's factory valve operation and gives the Raptor R a more aggressive, free-flowing note whenever the valve is open.
Valved for comfort. A tier 1 OE valve works exactly like the factory one. It opens at the throttle threshold, with the interior button or with the drive modes. Close it for the highway or a cold start, and leave it open the rest of the time. AWE also includes an exhaust-mounted valve bracket for the unused factory valve motor, which keeps the ECU satisfied.
X marks the spot. A precision-engineered AWE X-pipe tailored to the 5.2L gives the Raptor R an aggressive, free-flowing sound.
Tailpipes included. The kit is a full cat-back with resonated tailpipes made for the 5.2L Raptor R. Dual 3-inch CNC mandrel-bent, U.S.-sourced .065-inch wall T304L stainless runs from front to back, topped with 5-inch double-walled, slash-cut Chrome Silver tips.
Dyno-proven gains. AWE reports gains of up to 5 hp and 5 lb-ft of torque at the wheels.
Built in the USA. AWE designs and builds it in-house in Pennsylvania.
Features
- Dual 3-inch cat-back with bespoke SwitchPath muffler and resonated tailpipes
- Plug-and-play OE tier 1 valve with button, throttle and all four drive modes
- Tailored AWE X-pipe for the 5.2L
- 5-inch double-walled Chrome Silver tips
- Exhaust-mounted valve motor simulator bracket
- Locking collars for the exhaust hangers
- No cutting required
- Lifetime warranty, Perfect Fitment Guarantee and No CEL Guarantee
Emissions. AWE lists this system as 50-state emissions compliant and says it does not interfere with factory emissions equipment. This product carries a California Prop 65 notice.
Fitment: 2023-2026 Ford F-150 Raptor R with the 5.2L engine, Crew Cab, 5 ft 6 in bed. Fitment confirmed against AWE Tuning's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2026 | Ford | F-150 | Raptor R (5.2L, Crew Cab) |
The AWE SwitchPath Exhaust with 5-inch Chrome Silver tips is a dual 3-inch cat-back system for the 2021-2026 Ford F-150 Raptor with the 3.5L EcoBoost. It keeps the truck's factory valve operation, removes rasp from the twin-turbo V6 and gives the Raptor a fuller sound whenever the valve is open.
Valved for comfort. A tier 1 OE valve works exactly like the factory one. It opens at the throttle threshold, with the interior button or with the drive modes. Close it for the highway or a cold start, and leave it open the rest of the time. AWE also includes an exhaust-mounted valve bracket for the unused factory valve motor, which keeps the ECU satisfied.
X marks the spot. A precision-engineered AWE X-pipe smooths the 3.5TT's exhaust pulses and removes rasp, which AWE describes as the best-sounding six-cylinder Raptor note to date.
Tailpipes included. The kit is a full cat-back with resonated tailpipes made for the 3.5L Raptor. Dual 3-inch CNC mandrel-bent, U.S.-sourced .065-inch wall T304L stainless runs from front to back, topped with 5-inch double-walled, slash-cut Chrome Silver tips.
Dyno-proven gains. AWE reports gains of up to 2 hp and 5 lb-ft of torque at the wheels.
Built in the USA. AWE designs and builds it in-house in Pennsylvania.
Features
- Dual 3-inch cat-back with bespoke SwitchPath muffler and resonated tailpipes
- Plug-and-play OE tier 1 valve with button, throttle and all four drive modes
- Tailored AWE X-pipe
- 5-inch double-walled Chrome Silver tips
- Exhaust-mounted valve motor simulator bracket
- Locking collars for the exhaust hangers
- No cutting required
- Lifetime warranty, Perfect Fitment Guarantee and No CEL Guarantee
Emissions. AWE lists this system as 50-state emissions compliant and says it does not interfere with factory emissions equipment. This product carries a California Prop 65 notice.
Fitment: 2021-2026 Ford F-150 Raptor with the 3.5L engine, Crew Cab, 5 ft 6 in bed. Fitment confirmed against AWE Tuning's published application list.
Guides & Manuals
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor (3.5L, Crew Cab) |
The MBRP Armor BLK axle-back is a 3-inch, dual rear exit exhaust with black-coated turndown tails, made for the Ford F-150 Raptor (2022-2027, 3.5L EcoBoost HO) and the Raptor R (2023-2027, 5.2L supercharged). It is built from T304 stainless steel with an engineered high-heat black coating.
Black finish. The coating is a high-heat black finish. MBRP covers the black coating with a 1-year warranty against factory defects, and the rest of the system with its lifetime warranty.
Moderate tone. This is MBRP's street profile. The sound is described as moderate, so it adds a deeper voice without overwhelming cabin comfort.
Laser-welded turndown tails. The high-clearance tails turn downward to keep ground clearance for off-road use.
Bolt-on installation. Smooth mandrel-bent tubing with no rippling in the bends; the system includes the hardware and clamps needed.
Features
- 3-inch black-coated T304 stainless steel axle-back, dual rear exit
- Laser-welded high-clearance turndown tails
- Moderate exhaust tone, street profile
- Smooth mandrel-bent tubing, bolt-on installation
- Hardware and clamps included
- 1-year warranty on the finish, lifetime warranty on the rest
Emissions: California Proposition 65 warning applies. This is an exhaust-only part; check local rules for your area.
Fitment: 2022-2027 Ford F-150 Raptor (3.5L EcoBoost HO) and 2023-2027 Ford F-150 Raptor R (5.2L supercharged). Fitment confirmed against MBRP's published application list.
Guides & Manuals
Installation Instructions
Warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2027 | Ford | F-150 | Raptor |
| 2023-2027 | Ford | F-150 | Raptor R |
The MBRP Armor Pro axle-back is a 3-inch, dual rear exit exhaust with turndown tails, made for the Ford F-150 Raptor (2022-2027, 3.5L EcoBoost HO) and the Raptor R (2023-2027, 5.2L supercharged). It is built from T304 stainless steel and covered by MBRP's lifetime warranty.
Moderate tone. This is MBRP's street profile. The sound is described as moderate, so it adds a deeper voice without overwhelming cabin comfort.
Laser-welded turndown tails. The high-clearance tails turn downward to keep ground clearance for off-road use.
T304 stainless steel. The tubing resists corrosion and is mandrel bent with no rippling in the bends for good exhaust flow.
Bolt-on installation. The system installs as a bolt-on and includes the hardware and clamps needed.
Features
- 3-inch T304 stainless steel axle-back, dual rear exit
- Laser-welded high-clearance turndown tails
- Moderate exhaust tone, street profile
- Smooth mandrel-bent tubing, bolt-on installation
- Hardware and clamps included
- Lifetime MBRP warranty
Emissions: California Proposition 65 warning applies. This is an exhaust-only part; check local rules for your area.
Fitment: 2022-2027 Ford F-150 Raptor (3.5L EcoBoost HO) and 2023-2027 Ford F-150 Raptor R (5.2L supercharged). Fitment confirmed against MBRP's published application list.
Guides & Manuals
Installation Instructions
Warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2027 | Ford | F-150 | Raptor |
| 2023-2027 | Ford | F-150 | Raptor R |
The MBRP Armor Pro axle-back is a 3-inch, dual rear exit exhaust with carbon fiber tips for the Ford F-150 Raptor (2021-2027) and Raptor R (2023-2027). It is built from T304 stainless steel and covered by MBRP's lifetime warranty.
Street profile sound. This version is MBRP's street profile.
T304 stainless steel, lifetime warranty. MBRP describes T304 as the most durable material grade it offers. The tubing is easy to clean and maintain and suits trucks that operate in extreme conditions.
Mandrel-bent for flow. Smooth bends with no rippling keep exhaust gas moving, and the system installs as a bolt-on.
Carbon fiber tips included. The 5-inch OD carbon fiber tips come with the system.
Features
- 3-inch T304 stainless steel axle-back, dual rear exit
- 5-inch OD carbon fiber tips included
- Street profile sound
- Smooth mandrel-bent tubing, bolt-on installation
- Lifetime MBRP warranty
Emissions: California Proposition 65 warning applies. This is an exhaust-only part; check local rules for your area.
Fitment: 2021-2027 Ford F-150 Raptor (3.5L EcoBoost HO) and 2023-2027 Ford F-150 Raptor R (5.2L supercharged). Fitment confirmed against MBRP's published application list.
Guides & Manuals
Installation Instructions
Technical Drawing
Warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2027 | Ford | F-150 | Raptor |
| 2023-2027 | Ford | F-150 | Raptor R |
$55.19
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's 10-Year/Million Mile Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!
Technical BulletinTechnical Bulletin
- REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills
This Part Fits:
Year Make Model Submodel 2025-2026 Ford Expedition Active 2007-2010 Ford Expedition Eddie Bauer 2007-2010 Ford Expedition EL Eddie Bauer 2008-2017 Ford Expedition EL King Ranch 2007-2017 Ford Expedition EL Limited 2015-2017 Ford Expedition EL Platinum 2016-2017 Ford Expedition EL SSV 2011-2017 Ford Expedition EL XL 2007-2017 Ford Expedition EL XLT 2008 Ford Expedition Funkmaster Flex Edition 2008-2017,2020-2026 Ford Expedition King Ranch 2007-2024 Ford Expedition Limited 2025-2027 Ford Expedition Max Active 2020-2026 Ford Expedition Max King Ranch 2018-2024 Ford Expedition Max Limited 2018-2026 Ford Expedition Max Platinum 2018-2026 Ford Expedition Max SSV 2018-2019,2022 Ford Expedition Max XL 2018-2024 Ford Expedition Max XLT 2015-2026 Ford Expedition Platinum 2016-2026 Ford Expedition SSV 2022-2024 Ford Expedition Timberline 2025-2026 Ford Expedition Tremor 2011-2019,2022 Ford Expedition XL 2023-2024 Ford Expedition XL STX 2007-2024 Ford Expedition XLT 2010-2014 Ford F-150 FX2 2009-2014 Ford F-150 FX4 2010-2012 Ford F-150 Harley-Davidson Edition 2009-2026 Ford F-150 King Ranch 2009-2026 Ford F-150 Lariat 2011 Ford F-150 Lariat Limited 2013-2014,2016-2023 Ford F-150 Limited 2009-2026 Ford F-150 Platinum 2018-2026 Ford F-150 Police Responder 2017-2025 Ford F-150 Raptor 2016-2026 Ford F-150 SSV 2009-2014,2024-2026 Ford F-150 STX 2010-2014 Ford F-150 SVT Raptor 2021-2026 Ford F-150 Tremor 2009-2026 Ford F-150 XL 2009-2026 Ford F-150 XLT 2009-2010 Ford F-250 Super Duty Cabela's 2008-2009 Ford F-250 Super Duty FX4 2008-2009 Ford F-250 Super Duty Harley-Davidson Edition 2008-2016 Ford F-250 Super Duty King Ranch 2008-2016 Ford F-250 Super Duty Lariat 2013-2016 Ford F-250 Super Duty Platinum 2008-2016 Ford F-250 Super Duty XL 2008-2016 Ford F-250 Super Duty XLT 2009-2010 Ford F-350 Super Duty Cabela's 2008-2009 Ford F-350 Super Duty FX4 2008-2009 Ford F-350 Super Duty Harley-Davidson Edition 2008-2016 Ford F-350 Super Duty King Ranch 2008-2016 Ford F-350 Super Duty Lariat 2013-2016 Ford F-350 Super Duty Platinum 2008-2016 Ford F-350 Super Duty XL 2008-2016 Ford F-350 Super Duty XLT 2008-2015,2019-2024 Lincoln Navigator Base 2018-2026 Lincoln Navigator Black Label 2008-2015 Lincoln Navigator L 2022 Lincoln Navigator L Base 2018-2026 Lincoln Navigator L Black Label 2020-2026 Lincoln Navigator L Livery 2007 Lincoln Navigator L Luxury 2026 Lincoln Navigator L Premiere 2016-2026 Lincoln Navigator L Reserve 2016-2019 Lincoln Navigator L Select 2007 Lincoln Navigator L Ultimate 2007 Lincoln Navigator Luxury 2018,2026 Lincoln Navigator Premiere 2016-2026 Lincoln Navigator Reserve 2016-2019 Lincoln Navigator Select 2007 Lincoln Navigator Ultimate
- Choosing a selection results in a full page refresh.
- Opens in a new window.