Welcome to RaptorsOnly.com
-
Brands
Shop by brand
- 3D MAXpider
- Access
- Addictive Desert Designs
- Advan
- AEM Induction
- aFe
- Air Lift
- Airaid
- Alcon
- AlphaRex
- AMP Research
- AMS
- Anderson Composites
- ANZO
- ARB
- Atturo Tire
- AutoMeter
- AVS
- AWE Tuning
- BackRack
- Baer Brakes
- Baja Designs
- BAK
- Banks Power
- BBK
- BBS
- BD Diesel
- Belltech
- Bestop
- BFGoodrich
- BMC
- Body Armor 4x4
- Borla
- Brembo
- Brembo OE
- Bully Dog
- Bushwacker
- Camburg
- Clevite
- COBB
- Cometic Gasket
- COMP Cams
- CORSA Performance
- Covercraft
- CSF
- DBA
- DeatschWerks
- DFC
- Diode Dynamics
- DS18
- DV8 Offroad
- Eaton
- EBC
- Eibach
- Enkei
- Extang
- Fabtech
- Fel-Pro
- fifteen52
- Firestone
- Flowmaster
- Ford Racing
- Forgestar
- FORM Lighting
- FOX
- Garrett
- Gates
- GEN-Y Hitch
- Go Fast Bits
- Go Rhino
- Gram Lights
- Granatelli Motor Sports
- GSC Power Division
- Hawk Performance
- Hella
- Hellwig
- Hotchkis
- Husky Liners
- ICON
- Injen
- J&L
- JBA
- JLT
- K&N Engineering
- KC HiLiTES
- King Engine Bearings
- King Shocks
- Kleinn Air Horns
- Kooks Headers
- KYB
- LIQUI MOLY
- LUND
- Magnaflow
- Mahle OE
- Maxtrac
- Mayhem
- MBRP
- McGard
- Method Wheels
- MGP
- Michelin
- Mickey Thompson
- Mishimoto
- Moog
- Motul
- MTX Wheels
- N-Fab
- Nacho Offroad Technology
- NGK
- Nitrous Express
- Odyssey Battery
- ORACLE Lighting
- PowerStop
- Putco
- QA1
- Raceline
- Radium Engineering
- Rally Armor
- Rampage
- Raxiom
- Retrax
- Rhino-Rack
- Ridetech
- Rigid Industries
- Rival 4x4
- RockJock
- Roll-N-Lock
- Roush
- Royal Purple
- SCT Performance
- Skyjacker
- Snow Performance
- SPC Performance
- SPOD
- Stainless Works
- Superlift
- Superpro
- Timbren
- Torque Solution
- TOYO
- Truxedo
- Tuff Country
- Turbosmart
- UMI Performance
- Undercover
- Volant
- Vossen
- Wagner Tuning
- WeatherTech
- Weld
- Westin
- Whiteline
- Wilwood
- Yokohama Tire
- Yukon Gear & Axle
- Zone Offroad
No brands found. Try another name or initial.
156 brands
View all brands -
F-150 Raptor
- F-150 Raptor
-
1st Gen (2010-2014)
-
2nd Gen (2017-2020)
-
3rd Gen (2021-Present)
-
Raptor R (2023-Present)
-
Bronco Raptor
- Bronco Raptor
-
Suspension
-
Lighting
-
Bumpers & Armor
-
Racks
-
Interior Accessories
-
Exterior Accessories
-
Performance
-
Wheels & Tires
-
Brakes
-
Drivetrain
-
Engine & Cooling
-
Ranger Raptor
- Ranger Raptor
-
Suspension
-
Lighting
-
Bumpers & Armor
-
Racks
-
Interior Accessories
-
Exterior Accessories
-
Performance
-
Wheels & Tires
-
Brakes
-
Drivetrain
-
Engine & Cooling
Your cart
Subheading
Product comparison
Describe you product comparison grid
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
46 products
46 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$2,945.95
The Summit MKII Bumper muscles up with the most innovative and advanced technology yet, all while fully integrating with the suite of advanced driver assist safety technology that is available on newer vehicles. The state-of-the-art Summit MKII Bumper takes key components of its flagship namesake and kicks it up a notch with an ultra-modern design that’s constructed to turn heads. The Summit MKII Bumper has eliminated front buffers and now has robot welds on the front face playing into its modern aesthetic. Lighting capabilities have been significantly updated to include a plug-and-play sequential indicator, clearance light, daytime running light and fog light within one complete unit for an integrated approach.
WarrantyInstallation Instructions
Installation Instructions
- Hawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead (synthetic winch)
- Includes LED fog lights, LED daytime running lights and LED indicators and clearance lights
- Multi-fold, upswept and tapered wing design for optimum strength and approach angle
- Air bag compatible mounting system secures to the chassis via high tensile bolts
- Compatible with most electric low mount winches, up to 10,000 lb capacity
- Compatible with original equipment manufacturer (OEM) safety features
- Twin ARB Jack or farm jack points located in the lower pan
- Durable steel construction for maximum protection
- Two aerial brackets located on the center frame
- Provision for driving lights
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2023 | Toyota | Tacoma | Limited |
| 2016-2023 | Toyota | Tacoma | SR |
| 2016-2023 | Toyota | Tacoma | SR5 |
| 2021 | Toyota | Tacoma | Trail |
| 2023 | Toyota | Tacoma | Trail Special Edition |
| 2016-2023 | Toyota | Tacoma | TRD Off-Road |
| 2016-2023 | Toyota | Tacoma | TRD Sport |
$2,295.95
The Summit Rear Bumper combines class-leading design, proven ARB engineering and a no-compromise approach to protection and performance. Built around a tubular steel subframe that is finished in a textured black powder coat, the Summit rear bumper includes an integrated tow hitch, provisions for an ARB air compressor and trailer camera wiring, 50 amp Anderson plug and trailer plug wiring. With four easily accessible ARB Jack and Hi-Lift jack points, the Summit rear bumper is ready for the most demanding off-road use.
WarrantyInstallation Instructions
- Rear bumper only, must be installed with either wheel carriers, jerry can holder or cover panels (sold separately)
- Vehicle-specific design ensures excellent ground clearance and departure angles
- Manufactured From Steel For Maximum Strength
- Combines Rear Vehicle Protection with Towing
- Suitable for Vehicles without Sensors
- Integrated Tow Hitch
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1998-2007 | Toyota | Land Cruiser | Base |
$70.00
$1,709.08
Low-profile rear bumper designed for the 2024+ Ranger Raptor with a sharp, aggressive look that matches factory body lines. Features light mounts for (2) Rigid SR-M or (2) Baja Designs S2 lights for added rear visibility. Retains OEM parking sensors, recovery points, license plate lights, and all factory drive assist features. Direct-fit installation using supplied hardware. Finished in a durable hammer black powder coat with satin black accent panels. Made in the USA.
Installation Instructions- Integrated Light Mounts To Accommodate (2) Rigid Industries SRM Series Lights or (2) Baja Designs S2 Lights
- Direct Fitment Using Supplied Hardware For Easy Installation
- Durable Hammer Black Powder Coat With Satin Black Panels
- Compatible With All OEM Drive Assist Features
- Razor Sharp Design With Aggressive Detailing
- Retains OEM License Plate Lights
- Retains OEM Parking Sensors
- Retains OEM Recovery Points
- Proudly Made in the USA
- Low-Profile Fitment
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$2,159.08
The ADD Edge is a high-clearance steel front bumper from Addictive Desert Designs for the Ford Ranger Raptor. It pairs a sleek center light mount with low-profile wings, and it is proudly made in the USA.
Highest clearance in the ADD lineup. The low-profile wings give the most clearance of any ADD bumper line, so the truck can approach larger obstacles off-road.
Frenched-in light mount. The integrated center mount runs four RIGID 6-inch 360 Series lights or four Baja Designs LP4 lights, with a smooth, finished look.
Removable skid plate. A heavy-duty aluminum front skid plate protects the Ranger Raptor's undercarriage and can be removed when needed.
Keeps factory equipment. The bumper retains the factory recovery points, parking sensors, driving assist features and intercooler. The finish is a hammer black powder coat with satin black accent panels over steel construction.
Before you order. The bumper is not compatible with the XL, XLT and Lariat trim levels, or with the OEM fog lights and skid plate. ADD's Adaptive Cruise Control Relocation Bracket (sold separately) is required to maintain ACC, and ADD recommends trimming the inner fender liners for the best fit.
Features
- Ultra low-profile design with high-clearance wings
- Frenched-in center light mount for (4) 6 in. round lights
- Razor-sharp styling
- Removable heavy-duty 3/16 in. aluminum skid plate
- Retains OEM recovery points, parking sensors, drive assist features and intercooler
- Hammer black powder coat finish with satin black accent panels
- Steel construction, made in the USA
Prop 65 warning. This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Fitment: 2024-2026 Ford Ranger Raptor. Not compatible with Ranger XL, XLT or Lariat. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Install InstructionsInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$2,249.08
The Rock Fighter is a pre-runner style steel front bumper from Addictive Desert Designs for the Ford F-150 Raptor and Raptor R. It replaces the factory front bumper with a low-profile, plate-steel design, satin black accent panels and an included aluminum skid plate, and it is built and finished in the USA.
Protection under the nose. The included 3/16-inch aluminum skid plate is lightweight and rust-proof, and it has integrated air vents so the intercooler keeps getting airflow.
Keeps factory equipment working. The design retains the OEM parking sensors and the OEM intercooler. Adding the Adaptive Cruise Control Relocation Bracket (sold separately) lets you keep full use of the truck's ACC functions.
Built-in lighting. A center mount holds a 20-inch dual-row radius LED light bar or five cube lights, so you can add light for low-visibility terrain without extra brackets.
Finish and install. Two-stage hammer black powder coat guards the steel against scratches from brush and rocks, and the bumper is fully bolt-on.
2024+ F-150 Raptor note. On 2024+ Raptor models (not the Raptor R), the Shutter Motor Relocation Kit is needed so no dash lights appear when the lower intercooler shutter motor is disconnected for installation. ADD includes a shutter motor bracket with this bumper. It is also compatible with ADD's Raptor Intercooler Kit and Raptor R High Mount Heat Exchanger Kit (both sold separately); 2024+ models with the intercooler kit need the shutter motor relocation kit.
Features
- Low-profile fitment, steel construction
- Included 3/16 in. aluminum skid plate with air vents
- Center mount for a 20 in. dual-row radius LED light bar or five cube lights
- Satin black powder coat aluminum accent panels
- Retains OEM parking sensors and intercooler
- Optional ACC relocation bracket keeps ACC functions
- Two-stage hammer black powder coat finish
- Fully bolt-on installation
- Made in the USA
Prop 65 warning. This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Fitment: 2021-2026 Ford F-150 Raptor and 2023-2026 Ford F-150 Raptor R (Addictive Desert Designs lists the bumper for the 2021+ Raptor and 2023+ Raptor R). Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Bumper Install GuideInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$1,799.08
The Bomber Front Bumper (Baja) from Addictive Desert Designs is a tight-fitting replacement front bumper for the Ford Bronco Raptor. It is set up to carry Baja Designs LP4 lights in the center and cube lights at the sides, while keeping the factory parking sensors and tow hooks in use.
Center light panel. A satin black aluminum panel in the middle of the bumper frames three mounting points for Baja Designs LP4 lights.
Side light mounts. Mounting points at each end take cube lights, so you can build a lighting layout that suits how you drive.
Plate steel and powder coat. The bumper is modern plate steel finished in hammer black powder coat, with satin black powder coated aluminum panels.
Works with factory equipment. The OEM parking sensors are built into the bumper design and the tow hooks stay below the bumper. Note that the OEM skid plate will not fit with the Bomber front bumper. ADD offers an optional 3/16 in. vented aluminum skid plate made for it, and an optional Adaptive Cruise Control Relocation Bracket, which is required on trucks equipped with adaptive cruise control.
Features
- Mounts for 3 Baja Designs LP4 lights
- Side mounts for 2 cube lights
- Hammer black powder coat finish
- Satin black powder coat panels
- Modern plate steel design
- Retains OEM tow hooks
- Retains OEM parking sensors
- Optional 3/16 in. aluminum skid plate
- Optional adaptive cruise control bracket (required on adaptive cruise control trucks)
- Fully bolt-on
- Made in America
Fitment: 2022-2026 Ford Bronco Raptor. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Bumper Install GuideACC Bracket Install Guide
Installation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Ford | Bronco | Raptor |
$1,799.08
The Stealth Fighter Rear Bumper from Addictive Desert Designs is one of the brand's slimmest bumpers, made for the 2021+ Ford F-150 Raptor and Raptor R. It follows the body lines of the truck and suits the factory dovetail styling. This version comes in hammer black with two cube lights.
Slim and strong. Modern radius plate steel gives the bumper more protection than the factory rear bumper while measuring the same length from the tailgate. Recessed satin black powder coated aluminum panels cut weight.
Light mounts. Behind each panel are mounting points for rear-facing LED cube lights, handy for lighting up the bed in low light. Two integrated license plate lights come with the bumper.
Keeps the factory hardware. The bumper retains the OEM tow hitch, tow hooks, and dual exhaust, and sensor cutouts let the factory parking sensors keep working.
Features
- Modern radius plate steel design
- Complements the factory dovetail style
- 2 universal cube light mounts
- Integrated license plate lights
- Reinforced clevis mounts accept soft shackles
- Retains OEM tow hooks, tow hitch, and dual exhaust
- Retains OEM parking sensors
- Bumper color: hammer black; panel color: satin black
- Fully bolt-on
- Made in America
California Proposition 65. WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Fitment: 2021+ Ford F-150 Raptor and Raptor R. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Install InstructionsInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021+ | Ford | F-150 | Raptor, Raptor R |
The XTS Brush Guard from Westin is an attractive, front end upgrade for your OE steel Modular Performance front bumper. It features 2in. diameter tubing for maximum durability and constructed of 10-gauge steel uprights for strength and style. The XTS Brush Guard provides a variety of optional light mounting center bars, completing your vehicle's upgrade with round or square LED light kit with Westin auxiliary lights (sold separately). The XTS Brush Guard has a durable textured black powder coat finish with an e-coated base coat, providing long lasting corrosion protection from the elements, and is backed by a 3-year warranty. Includes all necessary mounting hardware for a hassle-free installation. The XTS Brush Guard is the perfect choice for Ford Bronco owners.
Installation InstructionsInstallation Instructions
- Optional round or square LED light kit with Westin auxiliary lights available (sold separately)
- Electrostatic base coat provides long lasting corrosion protection
- Wraparound Brush Guards Protects Headlights and Grill From Damage
- Electotastic Base Coat Provides Long Lasting Corrosion Protection
- Constructed of 10 Gauge Steel Uprights for Strength and Style
- Constructed of 10-gauge steel uprights for strength and style
- Designed for OE Heavy Duty Modular Performance front bumper
- Optional LED Light Kit w/Westin Auxilary Lights Available
- Wraparound brush guards protects headlights from damage
- Clears most winches up to 12,000 lbs. capacity
- Clears Most Winches Up To 12000 lbs. Capacity
- Bolt-on installation - no drilling required
- 2" diameter tubing for maximum durability
- 2 in. Diameter Tubing For Max Durability
- Bolt On Installation; No Drill Required
- Hardware And Mounting Brackets Included
- Optional Light Mounting Center Bars
- Compatible with all factory sensors
- Available In Textured Black Finish
- Bolt-on design using factory holes
- Compatible w/All Factory Sensors
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | Bronco | Badlands |
| 2021-2023,2025 | Ford | Bronco | Base |
| 2021-2026 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023 | Ford | Bronco | Heritage Edition |
| 2023 | Ford | Bronco | Heritage Limited Edition |
| 2021-2026 | Ford | Bronco | Outer Banks |
| 2022-2026 | Ford | Bronco | Raptor |
| 2025 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
Westin Automotive Product's new HDX Modular Grille Guards deliver bold styling and heavy-duty front-end protection. The innovative 3-piece design has proven its strength on emergency responder vehicles in a wide variety of high stress environments. Each application is engineered with strategically placed gusseting and reinforcement to provide superior structural rigidity that eliminates unwanted vibrations. The uprights feature durable 2-3/4in. wide rubber push pad strips for added coverage. With a heavy-duty frame mount system and wraparound wings made of massive 2in. diameter high-strength tube, these grille guards deliver complete front-end protection. Thanks to their modular construction, all HDX Modular Grille Guards are packaged and shipped via parcel post, providing a significant savings over LTL shipping. The HDX Modular Grille Guard features a durable polished stainless steel or black powder coat finish with an electrostatic base coat, providing long lasting corrosion protection from the elements. Mount kit and hardware included for a complete professional installation, and every HDX Modular Grille Guard is backed by a 3-year warranty.
Installation Instructions- Heavy duty 2 3/4 in. wide upright rubber strips give an added barrier of protection
- 2 in. tube full wraparound wings provide superior strength and protection
- Mount kit and hardware included for a complete professional installation
- Electrostatic base coat provides long lasting corrosion protection
- Full punch plate grille delivers total front-end protection
- 1-1/4 in. tube wing supports enhance structural rigidity
- Set of 2 optional light clamps - sold separately
- Heavy Duty 2 3/4 in. Wide Upright Rubber Strips
- 1 1/4 in. Tube For Support Wings On Some Apps
- 3-piece with bolt on headlight guards
- 2 in. Tube Full Wraparound Wings
- Mount Kit And Hardware Included
- 1 Piece Solid Construction
- Sensor Relocator Available
- Full Punch Plate Grille
- 3 Year Warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2023 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | Police Responder |
| 2022 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | SSV |
| 2024 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
Westin Automotive Product's new HDX Modular Grille Guards deliver bold styling and heavy-duty front-end protection. The innovative 3-piece design has proven its strength on emergency responder vehicles in a wide variety of high stress environments. Each application is engineered with strategically placed gusseting and reinforcement to provide superior structural rigidity that eliminates unwanted vibrations. The uprights feature durable 2-3/4in. wide rubber push pad strips for added coverage. With a heavy-duty frame mount system and wraparound wings made of massive 2in. diameter high-strength tube, these grille guards deliver complete front-end protection. Thanks to their modular construction, all HDX Modular Grille Guards are packaged and shipped via parcel post, providing a significant savings over LTL shipping. The HDX Modular Grille Guard features a durable polished stainless steel or black powder coat finish with an electrostatic base coat, providing long lasting corrosion protection from the elements. Mount kit and hardware included for a complete professional installation, and every HDX Modular Grille Guard is backed by a 3-year warranty.
Installation Instructions- 1 1/4" tube for support wings - On some applications
- Set of 2 optional light clamps - sold separately
- Heavy Duty 2 3/4 in. Wide Upright Rubber Strips
- 1 1/4 in. Tube For Support Wings On Some Apps
- 3-piece with bolt on headlight guards
- 2 in. Tube Full Wraparound Wings
- Mount Kit And Hardware Included
- 2" tube full wrap-around wings
- 1 Piece Solid Construction
- Sensor Relocator Available
- Full Punch Plate Grille
- 3 Year Warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2020 | Ford | F-150 | King Ranch |
| 2015-2020 | Ford | F-150 | Lariat |
| 2016-2020 | Ford | F-150 | Limited |
| 2015-2020 | Ford | F-150 | Platinum |
| 2018-2020 | Ford | F-150 | Police Responder |
| 2017-2020 | Ford | F-150 | Raptor |
| 2016-2020 | Ford | F-150 | SSV |
| 2015-2020 | Ford | F-150 | XL |
| 2015-2020 | Ford | F-150 | XLT |
Westin Automotive Product's new HDX Modular Grille Guards deliver bold styling and heavy-duty front-end protection. The innovative 3-piece design has proven its strength on emergency responder vehicles in a wide variety of high stress environments. Each application is engineered with strategically placed gusseting and reinforcement to provide superior structural rigidity that eliminates unwanted vibrations. The uprights feature durable 2-3/4in. wide rubber push pad strips for added coverage. With a heavy-duty frame mount system and wraparound wings made of massive 2in. diameter high-strength tube, these grille guards deliver complete front-end protection. Thanks to their modular construction, all HDX Modular Grille Guards are packaged and shipped via parcel post, providing a significant savings over LTL shipping. The HDX Modular Grille Guard features a durable polished stainless steel or black powder coat finish with an electrostatic base coat, providing long lasting corrosion protection from the elements. Mount kit and hardware included for a complete professional installation, and every HDX Modular Grille Guard is backed by a 3-year warranty.
Installation Instructions- 1 1/4" tube for support wings - On some applications
- Set of 2 optional light clamps - sold separately
- Heavy Duty 2 3/4 in. Wide Upright Rubber Strips
- 1 1/4 in. Tube For Support Wings On Some Apps
- 3-piece with bolt on headlight guards
- 2 in. Tube Full Wraparound Wings
- Mount Kit And Hardware Included
- 2" tube full wrap-around wings
- 1 Piece Solid Construction
- Sensor Relocator Available
- Full Punch Plate Grille
- 3 Year Warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | FX2 |
| 2009-2014 | Ford | F-150 | FX4 |
| 2010-2012 | Ford | F-150 | Harley-Davidson Edition |
| 2009-2014 | Ford | F-150 | King Ranch |
| 2009-2014 | Ford | F-150 | Lariat |
| 2011 | Ford | F-150 | Lariat Limited |
| 2013-2014 | Ford | F-150 | Limited |
| 2009-2014 | Ford | F-150 | Platinum |
| 2009-2014 | Ford | F-150 | STX |
| 2010-2014 | Ford | F-150 | SVT Raptor |
| 2009-2014 | Ford | F-150 | XL |
| 2009-2014 | Ford | F-150 | XLT |
$106.99
Putco Bumper Grille Inserts are a great economical choice to add style and protection to your vehicle. Our Bumper Grille Inserts are CNC laser cut to be vehicle application specific to ensure a precision fit. They are constructed from high-quality 26-gauge, T-304 stainless steel for extreme durability against the elements. Available in four different styles, hex pattern, bar, diamond, and punch styles. All available in two different finishes - bright polished and a black textured powder-coat finish. Putco Bumper Grille Inserts are CNC laser cut for a precision fit and are vehicle application-specific.
Warranty- Available In Polished Stainless And Black Powder Coat Finish
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018-2020 | Ford | F-150 | King Ranch |
| 2018-2020 | Ford | F-150 | Lariat |
| 2018-2020 | Ford | F-150 | Limited |
| 2018-2020 | Ford | F-150 | Platinum |
| 2018-2020 | Ford | F-150 | Police Responder |
| 2018-2020 | Ford | F-150 | Raptor |
| 2018-2020 | Ford | F-150 | SSV |
| 2018-2020 | Ford | F-150 | XL |
| 2018-2020 | Ford | F-150 | XLT |
$1,529.08
The Phantom Rear Bumper from Addictive Desert Designs is a trim, knife's-edge replacement bumper made for the 2024+ Ford Ranger Raptor. It improves ground clearance at the back of the truck, gives it a more aggressive stance, and keeps the factory rear hardware in place.
Slim, low-profile design. The knife's-edge shape and satin black accent panels follow the factory lines of the Raptor for a clean, close-fitting look.
Built for rough use. The bumper is made from steel with a durable two-stage hammer black powder coat, and the accent panels are powder coated aluminum in satin black.
Room for extra light. Toward each side of the bumper you can mount a pair of 3 in. cube lights for supplemental lighting behind the truck.
Keeps the factory features. The OEM recovery points, trailer plug and wiring, parking sensors, and license plate lights all stay in service.
Features
- Knife's-edge, low-profile design
- Mounts for (2) 3 in. cube lights
- Retains OEM recovery points and trailer plug and wiring
- Retains OEM parking sensors and license plate lights
- 2-stage hammer black powder coat finish
- Satin black powder coated aluminum accent panels
- Fully bolt-on
- Made in the USA
California Proposition 65. WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Fitment: 2024+ Ford Ranger Raptor. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Install InstructionsInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024+ | Ford | Ranger | Raptor |
$1,619.08
The Bomber Rear Bumper from Addictive Desert Designs is a slim, low-profile rear bumper made for the Ford Bronco Raptor. It follows the body lines of the truck while adding recovery points and light mounts, and it leaves the factory sensors and tow hooks working.
Plate steel construction. The main structure is modern plate steel finished in hammer black powder coat. Lightweight aluminum alloy panels are finished in satin black powder coat for contrast.
Recovery points. Two heavily reinforced clevis mounts accept soft shackles, giving you a dependable place to hook up on the trail.
Light mounts and plate relocation. Two universal mounting points toward the ends of the bumper take cube lights for added light behind the truck. A license plate bracket is included; it moves the plate above the bumper and bolts into the same mounting points as the spare tire carrier.
Keeps factory features. Cutouts let the parking sensors keep working, and the bumper sits above the OEM tow hooks so they can still be used as intended.
Features
- Modern plate steel design
- Hammer black powder coat finish
- Satin black powder coat aluminum panels
- Side mounts for 2 cube lights
- Reinforced clevis mounts accept soft shackles
- Parking sensor cutouts
- Retains OEM tow hooks
- License plate bracket included
- Fully bolt-on
- Made in America
Fitment: 2022-2026 Ford Bronco Raptor. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Install InstructionsInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Ford | Bronco | Raptor |
$1,709.08
The Bomber rear bumper from Addictive Desert Designs is a low-profile, slim-fitting replacement that follows the body lines of the Ford Bronco.
Steel and aluminum. Modern plate steel in a hammer black powder coat, with lightweight aluminum alloy panels in satin black.
Recovery ready. Two heavily reinforced clevis mounts accept soft shackles. The bumper sits just above the OEM tow hooks so they can still be used as intended.
Keeps the sensors. Cutouts let the parking sensor system keep working. The included license plate bracket moves the plate above the bumper, bolting to the spare tire carrier mounting points, and the OEM plate light can be installed in the new spot.
Extra lighting. Two universal cube light mounts sit toward each end for supplemental rear lighting. Fully bolt-on and made in America.
Features
- Modern plate steel design
- Side mounts for two cube lights
- Reinforced clevis mounts accept soft shackles
- Retains OEM tow hooks
- Retains OEM parking sensors
- Fully bolt-on, made in America
Fitment: Addictive Desert Designs lists this part for the Ford Bronco (2021-2026), which includes the Bronco Raptor (2022-2026); ADD names no Raptor exclusion. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Installation InstructionsInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Ford | Bronco | Raptor |
| 2021-2026 | Ford | Bronco | All trims |
$2,069.08
The ADD Pro Bolt-On Rear Bumper brings the slim, prerunner look of ADD's front Pro Bolt-On bumper to the back of the third-generation Ford F-150 Raptor and Raptor R.
Tube steel strength. The bumper is constructed from .120 in. wall steel tubing for durable protection at the rear of the truck, and the structural steel plates are finished in hammer black powder coat.
CNC aluminum top plate. The top plate is CNC cut aluminum with a satin black powder coat finish.
Lighting options. Pod light mounts toward both ends take 3 in. LED cube lights. ADD notes these can be wired to the reverse lights or to a separate harness for supplemental lighting off-road.
Factory features kept. The bumper retains the OEM reverse sensors, license plate lights, hitch and trailer harness, and tow hooks. It installs fully bolt-on and is made in America.
Features
- .120 in. wall steel tubing construction
- CNC cut aluminum top plate
- Mounts for two 3 in. LED cube lights
- Retains OEM reverse sensors and backup sensor cutouts
- Retains OEM hitch and trailer harness functionality
- Retains OEM tow hooks and license plate lights
- Satin black powder coat panel finish
- Hammer black powder coat finish
- Made in America
Prop 65. WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Fitment: Ford F-150 Raptor 2021-2026 and F-150 Raptor R 2023-2026. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Installation Instructions (ADD)Installation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$1,619.08
The Phantom Rear Bumper from Addictive Desert Designs is a plate steel upgrade for the third-generation Ford F-150 Raptor and Raptor R, built in a modern box structure that protects more than the factory bumper.
Hammerhead styling. Sleek wings flare out in a bold hammerhead shape that pairs with the Raptor's rear bodywork.
Factory features retained. Sensor cutouts keep the parking and backup warning system working. The factory dual exhaust and tow hooks fit comfortably below the bumper, and the OEM license plate lights and tow wiring plug or harness are retained.
Lighting built in. Mounting points for two 10 in. single-row LED light bars sit behind satin black aluminum accent panels.
Complete and bolt-on. The bumper comes with all hardware, installs 100% bolt-on and is made in the USA.
Features
- Plate steel box design
- 10 in. single row light bar mounts behind side accent panels
- Parking sensor cutouts, compatible with factory backup sensors
- Retains OEM license plate lights, tow hooks and tow wiring plug or harness
- Hammer black powder coat finish
- All hardware included
- Made in America
Prop 65. WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Fitment: Ford F-150 Raptor 2021-2026 and F-150 Raptor R 2023-2026. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Installation Instructions (ADD)Installation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$2,249.08
The HoneyBadger Rear Bumper from Addictive Desert Designs is a plate steel, box-design replacement for the factory rear bumper on the third-generation Ford F-150 Raptor and Raptor R. ADD shaped it to follow the Raptor's dovetail rear body lines closely.
Plate steel box design. The modern box construction offers more protection than the factory piece, while the stock dual exhaust and tow hooks still sit comfortably below the bumper.
Sensors stay working. Sensor cutouts keep the parking and backup warning system fully functional, and the OEM license plate lights and tow wiring plug or harness are retained.
Recovery and lighting. Two reinforced 1 in. clevis mounts accept soft shackles for recovery. Near each end, 10 in. LED light bar mounts sit behind satin black aluminum panels with badger claw cutouts, and two cube light mounts sit on each side of the center.
Trailer wiring. A factory or aftermarket trailer wiring harness can be mounted to the underside of the bumper near the hitch. The bumper installs fully bolt-on and is made in America.
Features
- Plate steel box design
- Compatible with factory backup sensors
- 10 in. LED light bar mounts behind side accent panels
- Cube light mounts for additional lighting
- Reinforced 1 in. clevis mounts accept soft shackles
- Retains OEM license plate lights, tow hooks and tow wiring plug or harness
- Hammer black powder coat with satin black panels
- Made in America
Prop 65. WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Fitment: Ford F-150 Raptor 2021-2026 and F-150 Raptor R 2023-2026. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Installation Instructions (ADD)Installation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$1,619.08
The Rock Fighter Rear Bumper from Addictive Desert Designs gives the third-generation Ford F-150 Raptor a low-profile steel bumper that guards the tailgate and rear body from rocks and brush on the trail.
Low-profile protection. The design follows the lines of the Raptor and puts a solid steel barrier between obstacles and the back of the truck without adding a lot of visual bulk.
Keeps the factory features. ADD built the bumper to retain the OEM parking sensors, license plate lights, trailer plug and wiring, and all recovery points, so nothing on the truck has to be given up.
Light mounts on the wings. A pair of side wing mounts accepts cube lights for extra light behind the truck in low-light conditions.
Finish and install. Made from steel with a 2-stage hammer black powder coat, the bumper installs fully bolt-on and is made in the USA.
Features
- Low-profile steel design
- Pair of side cube light mounts
- Retains OEM parking sensors
- Retains OEM license plate lights
- Retains OEM trailer plug and wiring
- Retains OEM recovery points
- 2-stage hammer black powder coat finish
- Fully bolt-on installation
- Made in the USA
Prop 65. WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Fitment: Ford F-150 Raptor 2021-2026 and F-150 Raptor R 2023-2026. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Installation Instructions (ADD)Installation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$2,069.08
The ADD PRO Bolt-On Rear Bumper replaces the stock rear bumper on the 2017-2020 Ford F-150 Raptor with a slim, tube-style design that echoes ADD's PRO front bumper. It is sold as a complete bolt-on bumper, finished in hammer black powder coat with satin black panels.
Tube steel construction. The frame is built from .120 in. wall steel tubing, giving the back of the truck a tough barrier without the bulk of a plate-style bumper. An aluminum top plate adds a clean, finished look.
Keeps the hitch usable. Addictive Desert Designs designed the bumper to retain the factory hitch functionality, so towing setups that work today keep working after the swap.
Room for extra lighting. The bumper includes mounts for two rear-facing cube lights, and the layout includes cutouts for the backup sensors.
Features
- .120 in. wall steel tubing frame
- Aluminum top plate
- Mounts for two rear-facing cube lights
- Backup sensor cutouts
- Retains the OEM hitch functionality
- Satin black powder coat panel finish
- Hammer black powder coat finish
- Made in America
Prop 65. WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Fitment: 2017-2020 Ford F-150 Raptor. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Installation Instructions (ADD)Installation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
$2,159.08
The Addictive Desert Designs Phantom is a full-size front bumper made for the 2024+ Ford Ranger Raptor. Its knife-edge shape follows the factory lines of the truck and keeps a low profile, and it is built from steel with an aluminum skid plate included in the box.
Lighting options. The integrated center mount takes either one 20-inch radius LED light bar or six cube lights. The side wings each have a mount for a 10-inch SR LED light bar, so up to two can be fitted.
Underbody protection. The included 3/16-inch aluminum skid plate has air vents that let the intercooler and radiator breathe. Because it is aluminum, ADD notes it will not rust.
Keeps factory equipment. The bumper retains the OEM parking sensors, recovery points and intercooler. To keep adaptive cruise control working, ADD requires its separate 2024+ Ranger Raptor Adaptive Cruise Control Relocation Kit.
Finish and build. A 2-stage hammer black powder coat covers the steel, with satin black powder coated aluminum accent panels. It is designed and manufactured in the USA.
Features
- Phantom full-size front bumper for the 2024+ Ranger Raptor
- Knife-edge, low-profile design
- Center mount for one 20-inch radius LED light bar or six cube lights
- Side wing mounts for two 10-inch SR LED light bars
- Included 3/16-inch aluminum skid plate with air vents
- Retains OEM intercooler, parking sensors and recovery points
- Steel construction with 2-stage hammer black powder coat
- Satin black powder coated aluminum accent panels
- Made in the USA
Prop 65. WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Fitment: 2024+ Ford Ranger Raptor. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Bumper Install GuideInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024+ | Ford | Ranger | Raptor |
$2,339.08
The Addictive Desert Designs Rock Fighter is a winch-ready front bumper made specifically for the Ford Bronco Raptor, with high clearance and approach angles for rough terrain.
Shaped to the Raptor. The modern radius plate-steel design flows with the contours of the Raptor-style fender flares.
Skid plate included. A vented skid plate with louvers is part of the bumper, so air still reaches the intercooler.
Recovery ready. A standard winch mount is built in, along with two reinforced clevis mounts that accept soft shackles.
Lighting. A universal light mount in the center takes up to a 20 in. radius LED light bar or five cube lights, and two light mounts on top take round lights. The bumper retains the OEM parking sensors.
Cruise control. ADD's Adaptive Cruise Control relocation bracket is available separately.
Features
- Modern radius plate steel design
- Universal light mount for a 20 in. radius light bar or five cube lights
- Two light mounts on top for round lights
- Vented skid plate with louvers for intercooler airflow
- Standard winch mount
- Retains OEM parking sensors
- Reinforced clevis mounts that accept soft shackles
- Fully bolt-on, made in America
Fitment: 2022-2026 Ford Bronco Raptor. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Bumper Install GuideACC Bracket Install Guide
Installation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Ford | Bronco | Raptor |
$1,979.08
The Bomber is a plate steel front bumper from Addictive Desert Designs for the sixth-generation Ford Bronco. This Rigid version carries three mounting points for 6-inch Rigid 360 lights.
Tight fit. The bumper follows the body contours closely and improves the approach angle and clearance compared with the factory bumper.
Lighting built in. A satin black aluminum panel at the center frames the three Rigid 360 mounts, and the side panels frame mounts for two cube lights.
Keeps the factory features. The OEM parking sensors are retained, and two heavily reinforced clevis mounts accept soft shackles for recovery. The OEM skid plate will fit with trimming, and ADD offers an optional 3/16-inch vented aluminum skid plate plus an Adaptive Cruise Control relocation bracket.
Finish. Hammer black powder coat on the steel, satin black on the aluminum panels. Fully bolt-on and made in America.
Features
- Modern plate steel design
- Mounts for three 6-inch Rigid 360 lights
- Side mounts for two cube lights
- Reinforced clevis mounts accept soft shackles
- Retains OEM parking sensors
- OEM skid plate fits with trimming; optional 3/16-inch aluminum skid plate
- Optional adaptive cruise control bracket
- Fully bolt-on, made in America
Fitment: Addictive Desert Designs lists this part for the Ford Bronco (2021-2026), which includes the Bronco Raptor (2022-2026); ADD names no Raptor exclusion. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Installation InstructionsInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Ford | Bronco | Raptor |
| 2021-2026 | Ford | Bronco | All trims |
$2,699.08
The Addictive Desert Designs Pro Bolt-On is the slimmest-fitting front bumper in ADD's lineup for the 2021-2026 Ford F-150 Raptor and the Raptor R, designed in a prerunner style.
Tube steel that hugs the truck. The main radius is .120 in. wall steel tube that follows the contours of the front end and sits flush with the grille and valance.
Keeps the intercooler where it is. A CNC-cut 1/8 in. aluminum skid plate is vented so air reaches the OEM intercooler, which stays in its original position. A shutter motor bracket is included with the bumper.
Flexible lighting. The universal light mount in the center takes up to six cube lights or a 20 in. radius LED light bar, protected by the lower tube, the skid plate and side steel plating. The optional ADD PRO Bolt-On Light Hoop, sold separately, adds mounting for up to four 6 in. round lights in the same low-profile style.
Winch-ready option. ADD also offers a winch conversion kit that lets this bumper accept a winch; it bolts to the truck's frame and sits behind the winch plate. It is selected as an option on ADD's page and is not part of this listing.
Plan the extras. ADD lists the bumper as compatible with its Raptor Intercooler Kit (sold separately; it needs the shutter motor relocation kit, and 2024-2025 models need an additional one) and the Raptor R High Mount Heat Exchanger Kit (sold separately).
Features
- Follows the contours of the front end with a low profile
- Retains the OEM intercooler location
- Light mounts for up to six cube lights or a 20 in. radius LED bar
- .120 in. wall steel tubing
- CNC-cut aluminum skid plate
- Hammer black steel with satin black panels
- Fully bolt-on, made in America
Fitment: 2021-2026 Ford F-150 Raptor and 2023 and newer Ford F-150 Raptor R. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Bumper, Winch Kit, and Light Hoop Install GuideACC Bracket Install Guide
Installation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$2,429.08
The Addictive Desert Designs Phantom is a low-profile front bumper for the third-generation Ford F-150 Raptor and the Raptor R, with a prerunner-inspired layout.
Plate steel, knife's edge look. Instead of traditional tube steel, the Phantom is built from plate steel with contours that mimic the look of trailing arms. The steel is finished in hammer black powder coat and the aluminum accent panels in satin black.
Full-coverage skid plate. A lightweight 3/16 in. aluminum skid plate protects the underside without adding excess weight, and its vented cutouts let air reach the intercooler. ADD notes the intercooler does not need to be moved for proper fitment.
Lighting options. A central 20 in. radius LED light bar mount sits in the bumper, and 10 in. SR light bars fit behind each side panel. The bumper has sensor mounts that keep the factory parking sensors working.
Before you install. ADD states an Adaptive Cruise Control relocation bracket is required for installation, and it also keeps ACC working. A shutter motor bracket ships with the bumper. The bumper is listed as compatible with ADD's Raptor Intercooler Kit (sold separately; it needs the shutter motor relocation kit, and 2024-2025 models need an additional one) and the Raptor R High Mount Heat Exchanger Kit (sold separately).
Features
- Knife's edge design with a low-profile fit
- Fits a 20 in. radius LED light bar and two 10 in. SR LED light bars
- Plate steel construction
- Full-size aluminum skid plate with air vents
- Retains the OEM intercooler and parking sensors
- Hammer black steel with satin black aluminum accent panels
- Fully bolt-on, made in the USA
Fitment: 2021-2026 Ford F-150 Raptor and 2023 and newer Ford F-150 Raptor R. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Bumper Install GuideACC Bracket Install Guide
Installation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$2,609.08
The Addictive Desert Designs HoneyBadger is a plate-steel front bumper for the 2021 and newer Ford F-150 Raptor and the Raptor R. This version includes the top hoop; ADD also sells the same bumper without it.
Built to follow the truck. The bumper tucks in tight to the front of the Raptor and follows its body lines, with sharp angles and a more aggressive stance. The steel is finished in hammer black powder coat and the aluminum accent panels in satin black.
Lighting where you need it. The top hoop carries a 30 in. radius LED light bar and partly shields it. A 20 in. light bar fits in a protected spot behind the HoneyBadger claw cutaways, and 10 in. light bars fit behind each side panel.
Sensor and non-sensor trucks. If your 2021+ Raptor has the 801A High package, the front parking sensors install in the bumper. Trucks with the 800A Standard package get the supplied sensor plugs for the mount holes. A shutter motor bracket is included.
Plan the extras. ADD lists this bumper as compatible with its Raptor Intercooler Kit (sold separately; it needs the shutter motor relocation kit) and the Raptor R High Mount Heat Exchanger Kit (sold separately). On 2024+ trucks the intercooler kit needs an additional shutter motor relocation kit. ADD also notes the bumper may block the factory front camera view, and recommends its Adaptive Cruise Control relocation bracket to keep ACC working.
Features
- Modern plate steel design that fits tight to the front of the truck
- 20 in. straight LED mount in the center
- 30 in. radius LED mount on top of the bumper
- 10 in. light bar mounts behind each side panel
- Fits sensor and non-sensor trucks
- Hammer black steel with satin black aluminum panels
- Fully bolt-on, made in America
Fitment: 2021-2026 Ford F-150 Raptor and 2023 and newer Ford F-150 Raptor R. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Bumper Install GuideACC Bracket Install Guide
Installation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$2,429.08
The HoneyBadger from Addictive Desert Designs is a sharp-angled, rugged front bumper for the 2021+ Ford F-150 Raptor and the 2023 Raptor R. This listing is the version with the top hoop, which carries a curved light bar above the bumper.
Lighting in protected positions. The top hoop holds a 30-inch radius LED light bar that follows the curve of the truck's front end. A 20-inch light bar can sit behind the HoneyBadger claw cutaways in the center, and 10-inch light bars mount behind each side panel for extra trail lighting.
Shaped to the truck. The bumper is designed to follow the Raptor's body lines closely while giving the front end a more aggressive stance. The steel has a hammer black powder coat and the aluminum panels a satin black powder coat, which protects against rust.
Sensor and non-sensor trucks. If your Raptor has the 801A High package, the front parking sensors install into the bumper. For trucks with the 800A Standard package, ADD ships sensor plugs to fill the mount holes. The OEM tow hooks fit underneath the bumper, and it is fully bolt-on and made in America.
Works with ADD upgrades. A shutter motor bracket is included. ADD lists compatibility with its Raptor Intercooler Kit (IC1650KIT) and Raptor R High Mount Heat Exchanger Kit (AC21112301NA), both sold separately; a 2024+ truck with the intercooler upgrade needs an additional shutter motor relocation kit. Trucks with adaptive cruise control can add ADD's separate ACC relocation bracket.
Features
- Modern plate steel design that fits tight to the front of the truck
- 30-inch radius LED light bar mount on top of the bumper
- 20-inch straight LED light bar mount in the center
- 10-inch light bar mounts behind each side panel
- Fits trucks with or without front parking sensors
- Retains OEM tow hooks
- Hammer black powder coat, satin black aluminum panels
- Shutter motor bracket included
- Made in America
Fitment: 2021-2026 Ford F-150 Raptor and 2023-2026 Ford F-150 Raptor R. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Bumper Install GuideInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$2,429.08
The Stealth Fighter is Addictive Desert Designs' best-known bumper line, and this version is built for the third-generation Ford F-150 Raptor and the Raptor R. It follows the truck's body lines closely while improving ground clearance and approach angle over the factory bumper.
A tight fit with room for lights. The face of the bumper sits only 1/2 inch proud of the OEM bumper, yet it still has space to hide LED lighting inside. The center mount takes a 40-inch radius light bar or up to ten LED cube lights, and two side mounts hold RIGID 10-inch SR light bars. The side mounts sit behind satin black aluminum panels with vented slots, so unused openings never leave empty holes.
Protection and recovery. Modern radius plate steel gives more protection than the factory bumper, and two reinforced clevis mounts accept soft shackles for recovery. A hammer black powder coat guards against rust and suits the factory exterior trim.
Keeps the factory hardware working. The OEM parking sensors and tow hooks are retained and the bumper is fully bolt-on and made in America. A shutter motor bracket is included. For trucks with adaptive cruise control, ADD offers a separate ACC relocation bracket (sold separately) that moves the sensor behind the grille.
Works with ADD cooling upgrades and winch kit. ADD lists the bumper as compatible with its Raptor Intercooler Kit (IC1650KIT) and the Raptor R High Mount Heat Exchanger Kit (AC21112301NA), both sold separately; a 2024+ truck with the intercooler upgrade needs an additional shutter motor relocation kit. ADD also sells a Stealth Fighter Winch Kit conversion for this bumper.
Features
- Modern radius plate steel design
- Universal light mount kit included for any size or brand of lighting
- Center mount fits a 40-inch radius light bar or up to 10 cube lights
- Side mounts for RIGID 10-inch SR LED lights
- Reinforced clevis mounts accept soft shackles
- Retains OEM parking sensors and tow hooks
- Satin black aluminum side panels, hammer black powder coat
- Shutter motor bracket included
- Fully bolt-on, made in America
Fitment: 2021-2026 Ford F-150 Raptor and 2023-2026 Ford F-150 Raptor R. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Bumper & Winch Kit Install GuideInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$2,339.08
The Addictive Desert Designs Bomber is a low-profile front bumper built for the third-generation Ford F-150 Raptor and the Raptor R. This version has mounts for four RIGID 360 6-inch round lights, giving the truck a full row of forward lighting.
Built to protect without losing clearance. The bumper pairs plate steel with lightweight aluminum panels and a full 3/16-inch aluminum skid plate. ADD states it weighs less than the factory front bumper.
Lighting where you want it. Four mounts hold RIGID 360 6-inch round lights across the center, and cube light mounts on each wing add side lighting. ADD also builds the Bomber with three Baja Designs LP6 mounts or two 20-inch light bar mounts; this listing is the Rigid 360 version.
Finish. The steel is coated in hammer black powder coat, while the aluminum panels and skid plate carry a satin black powder coat.
Keeps the factory hardware working. The OEM tow hooks and OEM parking sensors are retained, and the bumper is fully bolt-on and made in America. A shutter motor bracket is included. For trucks with adaptive cruise control, ADD offers a separate ACC relocation bracket (sold separately) to preserve full ACC use.
Works with ADD cooling upgrades. ADD lists the bumper as compatible with its Raptor Intercooler Kit (IC1650KIT) and the Raptor R High Mount Heat Exchanger Kit (AC21112301NA), both sold separately. If you install the intercooler upgrade on a 2024+ truck, an additional shutter motor relocation kit is required.
Features
- Modern plate steel design
- Full 3/16-inch aluminum skid plate
- Weighs less than the OEM front bumper
- Mounts for 4 RIGID 360 6-inch round lights
- Cube light mounts on each side wing
- Hammer black powder coat on the bumper, satin black on panels and skid plate
- Retains OEM tow hooks
- Retains OEM parking sensors
- Shutter motor bracket included
- Fully bolt-on, made in America
Fitment: 2021-2026 Ford F-150 Raptor and 2023-2026 Ford F-150 Raptor R. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Bumper Install GuideInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$2,339.08
The Addictive Desert Designs Bomber is a low-profile front bumper built for the third-generation Ford F-150 Raptor and the Raptor R. This version is set up for three Baja Designs LP6 round lights, so you get a finished lighting layout straight out of the box.
Built to protect without losing clearance. The bumper pairs plate steel with lightweight aluminum panels and a full 3/16-inch aluminum skid plate. ADD states it weighs less than the factory front bumper, so the truck's nose is better protected without adding bulk.
Lighting where you want it. Three mounts hold Baja Designs LP6 round lights across the center, and cube light mounts on each wing add side lighting. ADD also builds the Bomber with four Rigid 360 6-inch mounts or two 20-inch light bar mounts; this listing is the Baja Designs LP6 version.
Keeps the factory hardware working. The OEM tow hooks and OEM parking sensors are retained, and the bumper is fully bolt-on. A shutter motor bracket is included with the bumper. For trucks with adaptive cruise control, ADD offers a separate ACC relocation bracket (sold separately) to preserve full ACC use.
Works with ADD cooling upgrades. ADD lists the bumper as compatible with its Raptor Intercooler Kit (IC1650KIT) and the Raptor R High Mount Heat Exchanger Kit (AC21112301NA), both sold separately. If you install the intercooler upgrade on a 2024+ truck, an additional shutter motor relocation kit is required.
Finish and origin. Made in America.
Features
- Modern plate steel design
- Full 3/16-inch aluminum skid plate
- Weighs less than the OEM front bumper
- Mounts for 3 Baja Designs LP6 round lights
- Cube light mounts on each side wing
- Retains OEM tow hooks
- Retains OEM parking sensors
- Shutter motor bracket included
- Fully bolt-on
- Made in America
Fitment: 2021-2026 Ford F-150 Raptor and 2023-2026 Ford F-150 Raptor R. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Bumper Install GuideInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
| 2023-2026 | Ford | F-150 | Raptor R |
$1,439.08
The Black Label is Addictive Desert Designs' steel front bumper for the 2024-2026 Ford F-150 Raptor. It adds an aggressive look and a place to mount lighting while following the truck's factory bodylines for a trim fit.
Slim, finished details. Slim wings and a dual-stage hammer black powder coat give it a sleek look, and satin black powder coated accent panels and detailed cutouts add finish.
Lighting where you need it. The integrated center mount holds one 20 in. LED light bar for supplemental lighting.
Keeps the factory electronics working. The bumper has mounting points for the OEM parking sensors so they keep full function. Adaptive cruise control is retained when you add ADD's F-150 ACC Relocation Bracket, sold separately. It also works with both OEM and ADD intercoolers, and a shutter motor relocation bracket is included.
Straightforward install. It is a 3 piece, fully bolt-on design built from steel and made in the USA.
Features
- Aggressive plate steel design
- One 20 in. LED light bar mount
- Retains OEM parking sensors
- Retains adaptive cruise control with the F-150 relocation bracket
- Works with OEM and ADD intercoolers
- Included shutter motor relocation bracket
- 2-stage hammer black powder coat finish
- Satin black powder coated accent panels
- 3 piece design
- Fully bolt-on installation
- Made in the USA
Prop 65. WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Fitment: ADD lists this part for the 2024+ F-150, which includes the Raptor, and does not name any exclusion for the Raptor. Table years are 2024-2026. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Bumper Install GuideACC Bracket Install Guide
Installation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | F-150 | Raptor |
| 2024-2026 | Ford | F-150 | All trims |
$2,249.08
The Stealth Fighter is Addictive Desert Designs' steel plate front bumper for the 2018-2020 Ford F-150 Raptor. ADD describes it as one of its tightest fitting and most aggressive bumpers, built to follow the factory lines while adding real steel protection up front.
Tight, factory-style fit. A modern radius plate design keeps the bumper close to the front of the truck, matching the stock look instead of hanging out in front of it.
Room for serious lighting. The center of the bumper has a universal light mount system that takes up to 10 cube lights or a 40 in. radius or straight LED bar, or anything in between. Extra mounts behind the side panels take 10 in. SR LED bars.
Made for recovery gear. Reinforced clevis mounts accept soft shackles. ADD recommends its separate frame reinforcement kit when you use soft shackles, which gives the factory frame horns added strength with a winch or soft shackles and is bolt-on.
Everything for the lights is in the box. It ships with ADD's Universal Light Mount Kit so you can install any brand and size of lighting. The design is covered by US Patent 9,796,343.
Features
- Modern radius plate design
- Direct fit, no cutting or welding required
- Fully bolt-on
- Universal center light mount for up to 10 cube lights or a 40 in. straight or radius LED
- Mounts for 10 in. SR LEDs on the sides
- Reinforced clevis mounts accept soft shackles
- Laser cut skid plates, tabs and plates
- 0.120 in. wall steel tube construction
- Fully boxed frame horns
- Hammer black powder coat finish
- Stainless steel hardware
Fitment: ADD lists this part for the 2018-2020 F-150, which includes the Raptor, and does not name any exclusion for the Raptor. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Install InstructionsInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018-2020 | Ford | F-150 | Raptor |
| 2018-2020 | Ford | F-150 | All trims |
$2,429.08
The Addictive Desert Designs ADD PRO Bolt-On V1 gives the 2017-2020 Ford F-150 Raptor the clearance and look of a frame cut bumper without cutting the frame. ADD lists it for the Raptor only.
Flush, contoured fit. The bumper stays flush with the front of the Raptor and follows the body lines without needing a plastic valance.
Camera and intercooler stay put. The front camera keeps full function, and the vented skid plate gives the factory intercooler proper airflow, so the intercooler does not need to be moved.
Steel tube with a CNC cut skid plate. Construction is .120 in. wall steel tubing with a CNC cut aluminum skid plate for protection.
Lighting. Mounts under the main tube hold up to 6 cube lights or a 20 in. radius LED bar. ADD also sells an optional add-on light hoop, sold separately, that adds mounting for four 6 in. round lights.
Features
- Bolt-on install, no frame cutting
- True contour to the vehicle
- Retains full front camera function
- Retains the OEM intercooler
- Light mounts for up to 6 cube lights or a 20 in. radius LED bar
- .120 in. wall steel tubing
- CNC cut aluminum skid plate
- Satin black powder coat panels and hammer black powder coat finish
- Made in the USA
Prop 65. WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Fitment: 2017-2020 Ford F-150 Raptor only. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Installation InstructionsInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
$2,069.08
The Addictive Desert Designs Phantom is a low-profile, fully bolt-on front bumper for the 2017-2020 (2nd generation) Ford F-150 Raptor. Its styling draws on prerunner bumpers, with a knife's edge shape that ADD says echoes trailing arms.
Plate steel with a vented skid plate. The bumper is built from plate steel and carries a lightweight 3/16 in. aluminum skid plate. Vented cutouts in the plate let air reach the factory intercooler, which stays in place; no intercooler relocation is needed.
Lighting options. A central mount takes a 20 in. radius LED light bar, and 10 in. SR LED light bars mount behind each side panel.
Sensors and cruise control. Sensor mounts keep the factory parking sensors working. Installation requires an Adaptive Cruise Control relocation bracket, which ADD offers as an option.
Features
- Knife's edge, low-profile design
- Plate steel construction
- Full-size aluminum skid plate with air vents
- Fits a 20 in. radius LED light bar
- Fits two 10 in. SR LED light bars
- Retains the OEM intercooler and parking sensors
- Retains Adaptive Cruise Control function with the optional ACC relocation bracket
- Hammer black powder coat steel
- Satin black powder coat aluminum accent panels
- Made in the USA
Prop 65. WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Fitment: 2017-2020 Ford F-150 Raptor. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Installation InstructionsInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
$2,069.08
The Addictive Desert Designs ADD PRO V2 is a frame cut front bumper for the 2010-2014 Ford F-150 Raptor, aimed at giving the truck maximum approach angle for off-road driving while keeping the factory look.
Contoured without a valance. ADD says the V2 follows the body lines of the Raptor closely enough that no plastic valance is needed.
Steel tube with a skid plate. The bumper uses .120 in. wall steel tubing for strength and durability and includes an aluminum skid plate for underside protection.
Two-tone finish. The frame is finished in hammer black powder coat and the panels in satin black powder coat.
Features
- Frame cut design for maximum approach angle
- Contours the body lines without a plastic valance
- .120 in. wall steel tube construction
- Aluminum skid plate
- Hammer black powder coat finish
- Satin black powder coat panels
Prop 65. WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Fitment: 2010-2014 Ford F-150 Raptor. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Installation InstructionsInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
$2,069.08
The Addictive Desert Designs ADD PRO front bumper is a frame cut replacement bumper for the 2010-2014 Ford F-150 Raptor. It is built to give the truck more approach angle without giving up the look of the factory body.
Contoured to the Raptor. ADD shapes the bumper to follow the body lines of the truck, so it reads as part of the design instead of an add-on.
Steel tube with a skid plate. The bumper is built from .120 in. wall steel tubing for strength and durability, with an aluminum skid plate underneath for protection.
Lighting tucked out of the way. Mounting options sit underneath the main tube, keeping lights protected. The universal mount takes up to 6 cube lights or a 20 in. curved light bar.
Features
- Frame cut design for added approach angle
- .120 in. wall steel tube construction
- Aluminum skid plate
- Universal light mount for up to 6 cube lights or a 20 in. curved light bar
- Hammer black powder coat finish
- Satin black powder coat panels
Prop 65. WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Fitment: 2010-2014 Ford F-150 Raptor. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Installation InstructionsInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | SVT Raptor |
$2,879.08
The HoneyBadger front bumper reshapes the nose of a 2010-2014 Ford F-150 Raptor with an aggressive, body-hugging design from Addictive Desert Designs. It adds lighting, recovery points and a winch mount in one bolt-on bumper.
Lighting built in. A 40 in. radius (curved) LED light bar mounts up top, a straight 20 in. bar sits in the center, and each side panel has a mount for a 10 in. light bar behind it.
Recovery ready. Reinforced clevis mounts accept soft shackles, and the bumper is made with a winch mount so you can add a winch.
Made to fit the truck. The bumper is shaped to follow the front of the Raptor, with satin black side panel inserts against a hammer black bumper finish, in 3/16 in. mild steel and made in America.
Features
- Winch mount
- Bumper color: hammer black; panel color: satin black
- Reinforced clevis mounts for soft shackles
- Top mount: 40 in. RDS light bar
- Lower mount: 20 in. light bar
- Side mount: 10 in. light bar
- 3/16 in. mild steel construction
- Made in the USA
Prop 65 warning. This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Fitment: Ford F-150 Raptor, 2010-2014. Fitment confirmed against Addictive Desert Designs' own product listing for the 2010-2014 Ford Raptor.
Guides & Manuals
Install InstructionsInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | Raptor |
$143.08
The Frame Horn Gusset Kit from Addictive Desert Designs (ADD) reinforces the factory frame horn mounts on the Ford Bronco Raptor and other 2021-2026 Broncos.
Targets a known weak point. ADD says the OEM frame horn mounts on 6th-gen Broncos are failure prone, and that frame horn damage has been seen when a winch or tow hooks are used in recovery situations.
Backs up your bumper's recovery points. The kit bolts to the frame horn with heavy-duty grade 8 hardware, so you can use the winch and recovery points of your stock or aftermarket front bumper with more confidence. It is meant for winch-capable bumpers or bumpers with integrated recovery points.
Heavy-duty steel. The gussets are 1018 steel in a dual-stage hammer black powder coat. Installation is fully bolt-on, and the kit is made in the USA.
Features
- Reinforces the failure-prone OEM frame horn mounts
- Intended for winch-capable or recovery-point-integrated bumpers
- Includes heavy-duty grade 8 hardware
- Hammer black powder coat
- Fully bolt-on installation
- Made in the USA
Prop 65. WARNING: This product can expose you to chemicals including crystalline silica, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Fitment: 2022-2026 Ford Bronco Raptor, plus 2021-2026 Ford Bronco. Fitment confirmed against Addictive Desert Designs' published application list.
Guides & Manuals
Installation InstructionsInstallation Instructions (supplier copy)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Ford | Bronco | Raptor |
| 2021-2026 | Ford | Bronco | All trims |
Go Rhino's RC4 LR Bull Bar is a modern, sportier take on classic truck front protection. The 2.5" diameter tubular steel frame features a steel skid plate with a stylish hexagonal cut out patter, a slot for a 20" single row LED light bar, and pre-drilled holes along the center crossmember for additional auxiliary lighting. RC4 LR Frame comes with a Limited Lifetime warranty on materials and construction and a 5 year warranty on the Textured Black Finish.
Installation Instructions- Limited Lifetime warranty on materials and construction and a 5 year warranty on the Textured Black Finish.
- RC4 LR bull bar frame only, light bar and mounting brackets not included
- Hexagonal pattern design in skid plate area allows for air flow
- Complete kits with lights and mounting brackets also available
- Pre-drilled holes for additional auxiliary lights
- Adjustable mount for 20" single row light bar
- One-piece 2.5" tubular steel construction
- Easy bolt-on, no-drill installation
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2020 | Chevrolet | Colorado | Base |
| 2015-2020 | Chevrolet | Colorado | LT |
| 2015-2020 | Chevrolet | Colorado | WT |
| 2015-2020 | Chevrolet | Colorado | Z71 |
| 2016-2021 | Chevrolet | Silverado 1500 | Custom |
| 2019-2021 | Chevrolet | Silverado 1500 | Custom Trail Boss |
| 2014-2021 | Chevrolet | Silverado 1500 | High Country |
| 2015-2018 | Chevrolet | Silverado 1500 | LS |
| 2014-2021 | Chevrolet | Silverado 1500 | LT |
| 2019-2021 | Chevrolet | Silverado 1500 | LT Trail Boss |
| 2014-2021 | Chevrolet | Silverado 1500 | LTZ |
| 2019-2021 | Chevrolet | Silverado 1500 | RST |
| 2015-2021 | Chevrolet | Silverado 1500 | SSV |
| 2014-2021 | Chevrolet | Silverado 1500 | WT |
| 2019 | Chevrolet | Silverado 1500 LD | Custom |
| 2019 | Chevrolet | Silverado 1500 LD | LT |
| 2019 | Chevrolet | Silverado 1500 LD | WT |
| 2022 | Chevrolet | Silverado 1500 LTD | Custom |
| 2022 | Chevrolet | Silverado 1500 LTD | Custom Trail Boss |
| 2022 | Chevrolet | Silverado 1500 LTD | High Country |
| 2022 | Chevrolet | Silverado 1500 LTD | LT |
| 2022 | Chevrolet | Silverado 1500 LTD | LT Trail Boss |
| 2022 | Chevrolet | Silverado 1500 LTD | LTZ |
| 2022 | Chevrolet | Silverado 1500 LTD | RST |
| 2022 | Chevrolet | Silverado 1500 LTD | SSV |
| 2022 | Chevrolet | Silverado 1500 LTD | WT |
| 2009-2010 | Dodge | Ram 1500 | Laramie |
| 2009-2010 | Dodge | Ram 1500 | SLT |
| 2009-2010 | Dodge | Ram 1500 | ST |
| 2010 | Dodge | Ram 2500 | Laramie |
| 2010 | Dodge | Ram 2500 | Power Wagon |
| 2010 | Dodge | Ram 2500 | SLT |
| 2010 | Dodge | Ram 2500 | ST |
| 2010 | Dodge | Ram 2500 | SXT |
| 2010 | Dodge | Ram 2500 | TRX |
| 2010 | Dodge | Ram 3500 | Laramie |
| 2010 | Dodge | Ram 3500 | SLT |
| 2010 | Dodge | Ram 3500 | ST |
| 2015-2025 | Ford | F-150 | King Ranch |
| 2015-2025 | Ford | F-150 | Lariat |
| 2016-2023 | Ford | F-150 | Limited |
| 2015-2025 | Ford | F-150 | Platinum |
| 2018-2026 | Ford | F-150 | Police Responder |
| 2017-2025 | Ford | F-150 | Raptor |
| 2016-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2025 | Ford | F-150 | Tremor |
| 2015-2026 | Ford | F-150 | XL |
| 2015-2026 | Ford | F-150 | XLT |
| 2009-2010 | Ford | F-250 Super Duty | Cabela's |
| 2008-2009 | Ford | F-250 Super Duty | FX4 |
| 2004-2010 | Ford | F-250 Super Duty | Harley-Davidson Edition |
| 2004-2024 | Ford | F-250 Super Duty | King Ranch |
| 1999-2024 | Ford | F-250 Super Duty | Lariat |
| 2018-2024 | Ford | F-250 Super Duty | Limited |
| 2013-2024 | Ford | F-250 Super Duty | Platinum |
| 1999-2024 | Ford | F-250 Super Duty | XL |
| 1999-2024 | Ford | F-250 Super Duty | XLT |
| 2009-2010 | Ford | F-350 Super Duty | Cabela's |
| 2008-2009 | Ford | F-350 Super Duty | FX4 |
| 2004-2010 | Ford | F-350 Super Duty | Harley-Davidson Edition |
| 2003-2024 | Ford | F-350 Super Duty | King Ranch |
| 1999-2024 | Ford | F-350 Super Duty | Lariat |
| 2018-2024 | Ford | F-350 Super Duty | Limited |
| 2013-2024 | Ford | F-350 Super Duty | Platinum |
| 1999-2024 | Ford | F-350 Super Duty | XL |
| 1999-2024 | Ford | F-350 Super Duty | XLT |
| 2015-2020 | GMC | Canyon | Base |
| 2015-2020 | GMC | Canyon | SL |
| 2015-2020 | GMC | Canyon | SLE |
| 2015-2020 | GMC | Canyon | SLT |
| 2016-2023 | Nissan | TITAN XD | Platinum Reserve |
| 2016-2023 | Nissan | TITAN XD | PRO-4X |
| 2016-2023 | Nissan | TITAN XD | S |
| 2016-2021 | Nissan | TITAN XD | SL |
| 2016-2023 | Nissan | TITAN XD | SV |
| 2011-2026 | Ram | 1500 | Big Horn |
| 2012-2018,2026 | Ram | 1500 | Express |
| 2013-2019,2022-2023 | Ram | 1500 | HFE |
| 2011-2026 | Ram | 1500 | Laramie |
| 2014-2015 | Ram | 1500 | Laramie Limited |
| 2011-2021 | Ram | 1500 | Laramie Longhorn |
| 2015-2026 | Ram | 1500 | Limited |
| 2021-2026 | Ram | 1500 | Limited Longhorn |
| 2014-2026 | Ram | 1500 | Lone Star |
| 2021 | Ram | 1500 | Longhorn |
| 2011-2016 | Ram | 1500 | Outdoorsman |
| 2013 | Ram | 1500 | R/T |
| 2015-2026 | Ram | 1500 | Rebel |
| 2025-2026 | Ram | 1500 | RHO |
| 2011-2018 | Ram | 1500 | SLT |
| 2014-2018,2025-2026 | Ram | 1500 | Special Service |
| 2011-2018 | Ram | 1500 | Sport |
| 2011-2012 | Ram | 1500 | ST |
| 2011-2026 | Ram | 1500 | Tradesman |
| 2012 | Ram | 1500 | Tradesman HD |
| 2025 | Ram | 1500 | Tradesman HFE |
| 2021-2024 | Ram | 1500 | TRX |
| 2021 | Ram | 1500 | TRX Launch Edition |
| 2025-2026 | Ram | 1500 | Tungsten |
| 2025-2026 | Ram | 1500 | Warlock |
| 2019 | Ram | 1500 Classic | Big Horn |
| 2019-2022 | Ram | 1500 Classic | Express |
| 2019 | Ram | 1500 Classic | Laramie |
| 2019 | Ram | 1500 Classic | Lone Star |
| 2019-2022 | Ram | 1500 Classic | SLT |
| 2019-2023 | Ram | 1500 Classic | Special Service |
| 2019-2024 | Ram | 1500 Classic | Tradesman |
| 2013-2018 | Ram | 2500 | Big Horn |
| 2011-2018 | Ram | 2500 | Laramie |
| 2014-2015 | Ram | 2500 | Laramie Limited |
| 2011-2018 | Ram | 2500 | Laramie Longhorn |
| 2016-2018 | Ram | 2500 | Limited |
| 2013-2015 | Ram | 2500 | Lone Star |
| 2012-2016 | Ram | 2500 | Outdoorsman |
| 2011-2018 | Ram | 2500 | Power Wagon |
| 2011-2018 | Ram | 2500 | SLT |
| 2011-2013 | Ram | 2500 | ST |
| 2013-2018 | Ram | 2500 | Tradesman |
| 2013-2018 | Ram | 3500 | Big Horn |
| 2011-2018 | Ram | 3500 | Laramie |
| 2014-2015 | Ram | 3500 | Laramie Limited |
| 2011-2018 | Ram | 3500 | Laramie Longhorn |
| 2016-2018 | Ram | 3500 | Limited |
| 2013-2015,2017 | Ram | 3500 | Lone Star |
| 2011-2018 | Ram | 3500 | SLT |
| 2011-2013 | Ram | 3500 | ST |
| 2013-2018 | Ram | 3500 | Tradesman |
| 2023 | Toyota | 4Runner | 40th Anniversary Edition |
| 2016-2024 | Toyota | 4Runner | SR5 |
| 2018-2024 | Toyota | 4Runner | SR5 Premium |
| 2016,2021-2022 | Toyota | 4Runner | Trail |
| 2020-2021 | Toyota | 4Runner | Venture |
| 2016-2023 | Toyota | Tacoma | Limited |
| 2016-2023 | Toyota | Tacoma | SR |
| 2016-2023 | Toyota | Tacoma | SR5 |
| 2021 | Toyota | Tacoma | Trail |
| 2023 | Toyota | Tacoma | Trail Special Edition |
| 2016-2023 | Toyota | Tacoma | TRD Off-Road |
| 2017-2023 | Toyota | Tacoma | TRD Pro |
| 2016-2023 | Toyota | Tacoma | TRD Sport |
| 2014-2021 | Toyota | Tundra | 1794 Edition |
| 2014-2021 | Toyota | Tundra | Limited |
| 2021 | Toyota | Tundra | Nightshade |
| 2014-2021 | Toyota | Tundra | Platinum |
| 2014-2021 | Toyota | Tundra | SR |
| 2014-2021 | Toyota | Tundra | SR5 |
| 2021 | Toyota | Tundra | Trail |
| 2015-2017,2019-2021 | Toyota | Tundra | TRD Pro |
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.