{"title":"Lift Kits","description":null,"products":[{"product_id":"eibach-pro-lift-kit-front-springs-2010-2014-ford-f-150-svt-raptor-e30-35-042-01-20","title":"Eibach Pro-Lift-Kit Front Springs for 2010-2014 Ford F-150 SVT Raptor E30-35-042-01-20","description":"\u003cp\u003eThese Eibach Pro-Lift-Kit front springs raise the front end of a 2010-2014 Ford F-150 SVT Raptor with a direct spring swap. The kit is a set of two coil springs, so there is no spacer or coilover conversion to deal with and the factory shocks stay in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMore ground clearance and fender room.\u003c\/strong\u003e Raising the front gives the truck extra clearance over obstacles and more space in the wheel wells for larger wheels and tires.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKeeps the factory front end.\u003c\/strong\u003e The springs reuse the stock upper mounts and control arms, and Eibach states that no bump stop modifications are needed. Eibach also notes the springs were tested with factory dampers, including the magnetic ride type.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt in the USA.\u003c\/strong\u003e The springs are made in the U.S.A. with race-derived off-road engineering, finished in Eibach's silver coating with the logo on the coil, and covered by Eibach's five-year warranty against defects in material and workmanship.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation notes.\u003c\/strong\u003e Eibach's instructions call for keeping the original spring isolators, dampers and tubing, installing each spring with the logo right side up, and setting the spring perch on the factory shock's lowest clip position. Have the wheel alignment checked afterward, along with brake line clearance and tire-to-fender clearance if you run larger tires.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSet of 2 front coil springs\u003c\/li\u003e\n\u003cli\u003eDesigned for the 2010-2014 Ford F-150 SVT Raptor\u003c\/li\u003e\n\u003cli\u003eIncreased ground clearance and fender clearance for larger wheels and tires\u003c\/li\u003e\n\u003cli\u003eWorks with the factory dampers\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003cli\u003eFive-year Eibach warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEmissions and warnings:\u003c\/strong\u003e Eibach lists a California Proposition 65 warning for this product (cancer and reproductive harm, www.P65Warnings.ca.gov).\u003c\/p\u003e\u003cp\u003eFitment: 2010-2014 Ford F-150 SVT Raptor, front axle. Eibach advises that it does not guarantee fitment, height or warranty on unlisted applications. Fitment confirmed against Eibach's published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/eibach.com\/storage\/instructions\/D3655.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/39764203660ca8a6a04949da39be253e.PDF\" target=\"_blank\" rel=\"noopener\"\u003eWarranty\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2014\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eSVT Raptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":67767767662891,"sku":"EIBE30-35-042-01-20","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/eibach-pro-lift-kit-front.jpg?v=1795124635"},{"product_id":"eibach-pro-lift-kit-front-springs-1in-front-lift-2021-2026-ford-f-150-raptor-e30-35-060-01-20","title":"Eibach Pro-Lift-Kit Front Springs 1in Front Lift 35in\/37in for 2021-2026 Ford F-150 Raptor E30-35-060-01-20","description":"\u003cp\u003eThese Eibach Pro-Lift-Kit front springs raise the front of a 2021-2026 Ford F-150 Raptor with the 3.5L EcoBoost V6 by about 1 inch. The kit is a set of two coil springs that drop in without coilovers or spacers, so the truck keeps its factory upper mounts and control arms. Eibach lists the kit for both 35 inch and 37 inch tire setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLift from the spring, not from spacers.\u003c\/strong\u003e Because the lift comes from a taller spring rate and height rather than a spacer stacked on the shock, the suspension keeps its full range of travel and the ball joints and bushings are not asked to work at a new angle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade for the factory electronic shocks.\u003c\/strong\u003e Eibach notes that this kit is designed to be used with the original Fox electronic shocks, so the stock damping system stays in place and works with the new springs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMore room for bigger tires.\u003c\/strong\u003e The added front height gives extra fender clearance and ground clearance for larger wheels and tires, while Eibach designs the spring to hold on-road stability and ride quality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt in the U.S.A.\u003c\/strong\u003e Eibach makes the Pro-Lift-Kit springs in the United States, draws on its off-road race experience, and backs them with a five-year warranty.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSet of 2 front coil springs (front only; rear springs are a separate kit)\u003c\/li\u003e\n\u003cli\u003eAbout 1 inch of front lift\u003c\/li\u003e\n\u003cli\u003eListed for 35 inch and 37 inch tire applications\u003c\/li\u003e\n\u003cli\u003eKeeps the stock upper mounts and control arms\u003c\/li\u003e\n\u003cli\u003eDesigned for the OE Fox electronic shocks\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A., five-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProp 65:\u003c\/strong\u003e Eibach lists a California Proposition 65 warning for this product (cancer and reproductive harm; details at www.P65Warnings.ca.gov). Eibach lists no CARB EO number for it.\u003c\/p\u003e\u003cp\u003eFitment: 2021-2026 Ford F-150 Raptor, 3.5L V6 EcoBoost, 4WD, 3rd generation, in both the 35 inch and 37 inch applications. Fitment confirmed against Eibach's published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/eibach.com\/storage\/instructions\/D4082.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/39764203660ca8a6a04949da39be253e.PDF\" target=\"_blank\" rel=\"noopener\"\u003eWarranty\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":67767769104683,"sku":"EIBE30-35-060-01-20","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/eibach-e30350600120-raptor3g-1.jpg?v=1795124638"},{"product_id":"eibach-pro-lift-kit-front-springs-2-2in-front-lift-2021-2026-ford-f-150-raptor-e30-35-060-02-20","title":"Eibach Pro-Lift-Kit Front Springs +2.2in Front Lift for 2021-2026 Ford F-150 Raptor E30-35-060-02-20","description":"\u003cp\u003eThese Eibach Pro-Lift-Kit front springs raise the front of a 2021-2026 Ford F-150 Raptor (3.5L EcoBoost, 4WD, 3rd generation) by 2.2 inches. The kit is a set of two coil springs that replace the factory front springs, so you get more ground clearance and room for bigger wheels and tires without adding spacers or swapping the upper mounts and control arms. Eibach lists the same +2.2in front lift for both the 35-inch and 37-inch Raptor applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLift from the springs alone.\u003c\/strong\u003e Because the lift comes from a taller spring rather than a spacer, the suspension keeps its full range of travel and the stock geometry stays in play. It is a front-only kit, so the rear of the truck is not changed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt to work with the factory shocks.\u003c\/strong\u003e Eibach notes that this kit is designed to use the OE FOX electronic shocks, so the Raptor's electronic suspension stays in service. Eibach also states that it does not guarantee fitment, height or warranty on applications it does not list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAmerican-made and backed for five years.\u003c\/strong\u003e The springs are made in the U.S.A. and carry Eibach's five-year warranty against defects in material and workmanship under normal use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSet of 2 front coil springs\u003c\/li\u003e\n\u003cli\u003e+2.2in front lift on the F-150 Raptor, 35in and 37in tire applications\u003c\/li\u003e\n\u003cli\u003eAdded ground clearance and fender clearance for larger wheels and tires\u003c\/li\u003e\n\u003cli\u003eKeeps stock upper mounts and control arms\u003c\/li\u003e\n\u003cli\u003eDesigned for the OE FOX electronic shocks\u003c\/li\u003e\n\u003cli\u003eMade in U.S.A.\u003c\/li\u003e\n\u003cli\u003eFive-year Eibach warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEmissions and warnings:\u003c\/strong\u003e This is a chassis part with no emissions certification. Eibach carries a California Proposition 65 warning for this product (www.P65Warnings.ca.gov).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e 2021-2026 Ford F-150 Raptor, 3.5L V6 EcoBoost, 4WD, 3rd generation, with 35in or 37in tires. Fitment confirmed against Eibach's published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/eibach.com\/storage\/instructions\/D4099.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/39764203660ca8a6a04949da39be253e.PDF\" target=\"_blank\" rel=\"noopener\"\u003eWarranty\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":67767769202987,"sku":"EIBE30-35-060-02-20","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/eibach-e30350600220-raptor3g-1.jpg?v=1795124703"},{"product_id":"eibach-pro-lift-kit-hd-springs-set-of-4-2021-2026-ford-f-150-raptor-e30-35-060-03-22","title":"Eibach Pro-Lift-Kit HD Front + Rear Springs (Set of 4) for 35in\/37in 2021-2026 Ford F-150 Raptor 3.5L E30-35-060-03-22","description":"\u003cp\u003eThe Eibach Pro-Lift-Kit HD is a set of four coil springs (front and rear) made for the 2021-2026 Ford F-150 Raptor with the 3.5L EcoBoost V6 and 4WD. It raises the stance of the truck for extra ground clearance and room for larger wheels and tires, while the heavy-duty rear springs are built to hold that height when you load the truck down. It is listed for both 35in and 37in applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLift that holds up under load.\u003c\/strong\u003e The HD rear springs carry a higher spring rate than Eibach's standard lift springs. That helps the rear keep its intended ride height with cargo, a bed rack, a camper or other accessories, without air bags, spring spacers or an overly stiff spring. Eibach designs the rear to be run at fully loaded height; the other rear heights it lists are for reference only, and its rear lift figures span 0 to 500 lbs of load. Too much lift will cause poor ride quality, so choose the height that suits how you use the truck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt to work with the factory shocks.\u003c\/strong\u003e This kit is designed to use the OE FOX electronic shocks, so you keep the Raptor's factory damping hardware instead of replacing it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade in the U.S.A.\u003c\/strong\u003e Eibach builds these springs in the United States and backs them with a five-year warranty against defects in material and workmanship, other than coatings, under normal use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSet of 4 springs: front and rear\u003c\/li\u003e\n\u003cli\u003eHeavy-duty rear springs for loaded ride height\u003c\/li\u003e\n\u003cli\u003eAdded ground clearance\u003c\/li\u003e\n\u003cli\u003eMore fender clearance for larger wheels and tires\u003c\/li\u003e\n\u003cli\u003eImproved on-road stability and handling\u003c\/li\u003e\n\u003cli\u003eDesigned for OE FOX electronic shocks\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEmissions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eProp 65 warning applies to this product. No CARB EO number is listed for it.\u003c\/p\u003e\u003cp\u003eFitment: 2021-2026 Ford F-150 Raptor, 3.5L V6 EcoBoost, 4WD, 3rd generation, for 35in and 37in applications. Eibach does not guarantee fitment, height or warranty on unlisted applications. Fitment confirmed against Eibach's published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/eibach.com\/storage\/instructions\/D4099.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions D4099\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/eibach.com\/storage\/instructions\/D4156.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions D4156\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/39764203660ca8a6a04949da39be253e.PDF\" target=\"_blank\" rel=\"noopener\"\u003eWarranty\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/80ca39b1b22294589760a182cef397ef.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":67767769432363,"sku":"EIBE30-35-060-03-22","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/eibach-e30350600222-raptor3g-1_8a821a5c-9a4f-48fc-bb8b-d0d40fdbfb19.jpg?v=1795124869"},{"product_id":"eibach-pro-lift-kit-front-springs-2023-2026-ford-f-150-raptor-r-e30-35-060-04-20","title":"Eibach Pro-Lift-Kit Front Springs (Front Only) for 2023-2026 Ford F-150 Raptor R 5.2L E30-35-060-04-20","description":"\u003cp\u003eThese Eibach Pro-Lift-Kit front springs raise the front end of a 2023-2026 Ford F-150 Raptor R by swapping the factory coil springs for taller, race-developed ones. The kit is front only and comes as a set of two springs, so you get more ground clearance and more room for bigger wheels and tires without changing the rest of the front suspension.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA lift that keeps the factory hardware.\u003c\/strong\u003e Because the springs drop in where the originals sit, the stock upper mounts and control arms stay in the truck. There are no spacers stacked on the strut, so the suspension keeps its full travel and your bushings and ball joints are not asked to work at new angles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt for the Raptor R's electronic shocks.\u003c\/strong\u003e Eibach designed this kit to be used with the original Fox electronic shocks, so you keep the adaptive damping the truck came with instead of replacing it with a coilover system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRide and handling.\u003c\/strong\u003e The goal is a lift with a tasteful amount of added height while keeping on-road stability and handling close to stock, which matters on a truck that spends its week on pavement and its weekend on the trail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the U.S.A. and backed by a warranty.\u003c\/strong\u003e Eibach builds these springs in the United States and covers them with a five-year warranty against defects in material and workmanship (coatings excluded) on passenger cars and light-duty trucks under normal use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSet of 2 front coil springs, front only\u003c\/li\u003e\n\u003cli\u003eIncreases front ground clearance\u003c\/li\u003e\n\u003cli\u003eMore fender clearance for larger wheels and tires\u003c\/li\u003e\n\u003cli\u003eKeeps the stock upper mounts and control arms\u003c\/li\u003e\n\u003cli\u003eDesigned to use the original Fox electronic shocks\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003cli\u003eFive-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEmissions and safety.\u003c\/strong\u003e This is a chassis part with no emissions content. Prop 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. See www.P65Warnings.ca.gov.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e 2023-2026 Ford F-150 Raptor R with the 5.2L supercharged V8, 4WD. Eibach lists no other vehicle for this part and does not guarantee fitment on unlisted applications. Fitment confirmed against Eibach's published application list.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\n\u003ca href=\"https:\/\/eibach.com\/storage\/instructions\/D4208.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\n\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R 5.2L Supercharged 4WD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":67767769530667,"sku":"EIBE30-35-060-04-20","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/eibach-e30350600420-raptor3gr-1.jpg?v=1795124896"},{"product_id":"eibach-pro-lift-kit-1-1in-front-springs-for-use-w-oe-fox-e-shocks-2022-2026-ford-bronco-raptor-e30-35-063-01-20","title":"Eibach Pro-Lift-Kit +1.1in. Front Springs (For Use w\/ OE Fox E-Shocks) for 2022-2026 Ford Bronco Raptor E30-35-063-01-20","description":"\u003cp\u003eThese Eibach Pro-Lift-Kit front springs raise the front end of a 2022-2026 Ford Bronco Raptor with the 3.0L engine by about 1.1 inches. The set of two coil springs is made in the USA and is built to work with the factory FOX electronic shocks, so you keep the stock shock and electronic damping setup instead of moving to a coilover conversion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdded ground clearance and fender room.\u003c\/strong\u003e Raising the front gives the truck a little more clearance at the nose and more space in the wheel wells for larger wheels and tires.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKeeps the factory suspension hardware.\u003c\/strong\u003e This is a spring-only change. The springs are made to retain the stock upper mounts and control arms, so you are not adding spacers that load the bushings and ball joints.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDesigned for off-road use and daily driving.\u003c\/strong\u003e Eibach develops its Pro-Lift-Kit springs from its off-road racing experience, aiming to lift the truck without giving up ride quality or on-road stability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFront only.\u003c\/strong\u003e Part E30-35-063-01-20 covers the front axle. It is sold as a set of 2 springs and is designed to use the OE FOX electronic shocks. Eibach does not guarantee fitment, height or warranty on applications it does not list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSet of 2 front coil springs, about +1.1 in. of lift\u003c\/li\u003e\n\u003cli\u003eMade for the 2022-2026 Ford Bronco Raptor 3.0L\u003c\/li\u003e\n\u003cli\u003eDesigned to use the OE FOX electronic shocks\u003c\/li\u003e\n\u003cli\u003eRetains stock upper mounts and control arms\u003c\/li\u003e\n\u003cli\u003eMade in U.S.A.\u003c\/li\u003e\n\u003cli\u003eFive-year warranty against defects in material and workmanship\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWarranty and Prop 65.\u003c\/strong\u003e Eibach backs these springs with a five-year warranty on material and workmanship for use on passenger cars and light-duty trucks under normal conditions. California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm (www.P65Warnings.ca.gov).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e 2022-2026 Ford Bronco Raptor 3.0L. Fitment confirmed against Eibach's published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/eibach.com\/storage\/instructions\/D4188.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstructions\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/39764203660ca8a6a04949da39be253e.PDF\" target=\"_blank\" rel=\"noopener\"\u003eWarranty\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":67767769989419,"sku":"EIBE30-35-063-01-20","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/eibach-e30350600120-raptor3g-1_d135d04e-9987-442d-9ca3-8f8e0bfcfbfc.jpg?v=1795124881"},{"product_id":"eibach-pro-lift-kit-rear-springs-2022-2026-ford-bronco-raptor-e30-35-063-02-02","title":"Eibach Pro-Lift-Kit Rear Springs (Use with OE FOX Electronic Shocks) for 2022-2026 Ford Bronco Raptor E30-35-063-02-02","description":"\u003cp\u003eThese Eibach Pro-Lift-Kit rear springs raise the back of a 2022-2026 Ford Bronco Raptor by swapping the factory coil springs for a taller, performance-tuned pair. The set contains two springs and is for the rear axle only, so it pairs with whatever front setup you run. Because it uses the original FOX electronic shocks, there is no coilover conversion, spacer stack or other modification to the shock hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA lift that works with your factory shocks.\u003c\/strong\u003e The kit is built to be used with the OE FOX electronic shocks the Bronco Raptor already has. You keep the stock shock absorbers and their electronics while gaining ride height from the springs alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMore room for bigger wheels and tires.\u003c\/strong\u003e Lifting the rear opens up extra fender clearance, which helps if you plan to run larger tires or want a more aggressive stance on the trail.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStock mounts stay in place.\u003c\/strong\u003e Eibach designs the Pro-Lift-Kit line to lift without compromising the factory suspension components, so the springs seat in the original locations and the ride stays composed on the road.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRace-bred spring engineering.\u003c\/strong\u003e Eibach develops the line using lessons from off-road racing, aiming for added ground clearance and stable on-road handling together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSet of 2 rear coil springs for the Bronco Raptor\u003c\/li\u003e\n\u003cli\u003eDesigned to work with OE FOX electronic shocks\u003c\/li\u003e\n\u003cli\u003eAdded ground clearance and fender clearance for larger wheels and tires\u003c\/li\u003e\n\u003cli\u003eKeeps the factory shocks and mounting points\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003cli\u003eFive-year Eibach warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWarranty and notices\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEibach backs these springs with a five-year warranty against defects in material and workmanship under normal use. California Proposition 65: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm (www.P65Warnings.ca.gov).\u003c\/p\u003e\u003cp\u003eFitment: 2022-2026 Ford Bronco Raptor 3.0L, rear springs only, for use with the original FOX electronic shocks. Fitment confirmed against Eibach's published application list. Eibach does not guarantee fitment, ride height or warranty on applications it does not list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/eibach.com\/storage\/instructions\/D4191.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/39764203660ca8a6a04949da39be253e.PDF\" target=\"_blank\" rel=\"noopener\"\u003eWarranty\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":67767770054955,"sku":"EIBE30-35-063-02-02","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/eibach-e3035630202-broncoraptor-1_06b5da94-6a8e-4bb8-bb6d-56e62e428561.jpg?v=1795124904"},{"product_id":"eibach-pro-lift-kit-2-6in-front-springs-2022-2026-ford-bronco-raptor-e30-35-063-02-20","title":"Eibach Pro-Lift-Kit +2.6in Front Springs for 2022-2026 Ford Bronco Raptor E30-35-063-02-20","description":"\u003cp\u003eThese Eibach Pro-Lift-Kit front springs raise the front of a 2022-2026 Ford Bronco Raptor about 2.6 inches by replacing the factory coil springs. The lift comes from the springs alone, so there is no spacer stack and no new upper mounts to install. The set contains two springs and lifts the front end only; the rear is left at stock height.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLift without extra stress on the front end.\u003c\/strong\u003e Because the springs take the place of the originals, the front suspension keeps its full range of travel and the stock upper mounts and control arms stay in use. Spacer-style lifts load the bushings and ball joints differently; a spring swap does not.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRoom for bigger tires.\u003c\/strong\u003e The added ride height opens up more space in the front wheel wells, which helps when you run a larger wheel and tire. It also gives a little more ground clearance under the front axle area for trail use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for the Raptor's electronic shocks.\u003c\/strong\u003e Eibach notes that this kit is designed to be used with the original Fox electronic shocks, so you keep the factory damping system rather than swapping to a different shock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRoad manners stay in mind.\u003c\/strong\u003e Eibach develops these springs from its off-road racing experience, aiming for stable, predictable on-road handling alongside better trail capability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSet of 2 front coil springs, about +2.6 in. of front lift\u003c\/li\u003e\n\u003cli\u003eFront lift only; rear height is unchanged\u003c\/li\u003e\n\u003cli\u003eDesigned for use with the OE Fox electronic shocks\u003c\/li\u003e\n\u003cli\u003eRetains the stock upper mounts and control arms\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003cli\u003eFive-year Eibach warranty against defects in material and workmanship\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWarnings:\u003c\/strong\u003e Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e 2022-2026 Ford Bronco Raptor with the 3.0L engine. Eibach does not guarantee fitment, lift height or warranty on applications it does not list. Fitment confirmed against Eibach's published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/eibach.com\/storage\/instructions\/D4190.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/39764203660ca8a6a04949da39be253e.PDF\" target=\"_blank\" rel=\"noopener\"\u003eWarranty\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":67767770153259,"sku":"EIBE30-35-063-02-20","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/eibach-e30350630220-broncoraptor-1.jpg?v=1795124891"},{"product_id":"eibach-pro-lift-kit-springs-2022-2026-ford-bronco-raptor-e30-35-063-02-22","title":"Eibach Pro-Lift-Kit Front and Rear Springs Set of 4 for 2022-2026 Ford Bronco Raptor with OE FOX Electronic Shocks E30-35-063-02-22","description":"\u003cp\u003eThe Eibach Pro-Lift-Kit for the 2022-2026 Ford Bronco Raptor is a set of four replacement coil springs, two front and two rear, that raise the stance of the truck without adding spacers or changing the suspension geometry. It is built to work with the Bronco Raptor's factory FOX electronic shocks, so you keep the stock damper hardware and electronic control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMore lift, same hardware.\u003c\/strong\u003e The springs swap in for the factory springs and keep the stock upper mounts and control arms. That gives you extra ground clearance and a taller ride height while the suspension keeps its full range of travel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRoom for bigger tires.\u003c\/strong\u003e The added ride height opens up space in the wheel wells, which helps when you step up to larger wheels and tires on a trail-ready build.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEveryday manners.\u003c\/strong\u003e Eibach designs these springs with off-road race experience in mind, aiming for solid on-road stability and handling so the truck still drives well between trailheads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade in the USA.\u003c\/strong\u003e The kit is manufactured in the U.S.A. and carries Eibach's five-year warranty against defects in material and workmanship.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSet of 4 springs: front and rear\u003c\/li\u003e\n\u003cli\u003eDesigned to use the factory FOX electronic shocks\u003c\/li\u003e\n\u003cli\u003eIncreased ground clearance\u003c\/li\u003e\n\u003cli\u003eMore fender clearance for larger wheels and tires\u003c\/li\u003e\n\u003cli\u003eKeeps stock upper mounts and control arms\u003c\/li\u003e\n\u003cli\u003eMade in U.S.A. with a five-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEmissions and warnings:\u003c\/strong\u003e This is a chassis part with no emissions function. California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm (www.P65Warnings.ca.gov).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Fits the 2022-2026 Ford Bronco Raptor with the 3.0L engine. Eibach notes the kit is designed for the factory FOX electronic shocks, and does not guarantee fitment, height or warranty on unlisted applications. Fitment confirmed against Eibach's published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/eibach.com\/storage\/instructions\/D4189.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/39764203660ca8a6a04949da39be253e.PDF\" target=\"_blank\" rel=\"noopener\"\u003eWarranty\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":67767770218795,"sku":"EIBE30-35-063-02-22","price":798.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/eibach-e3035630222-broncoraptor-1.jpg?v=1795124856"},{"product_id":"eibach-pro-lift-kit-front-springs-2024-2026-ford-ranger-raptor-e30-35-066-01-20","title":"Eibach Pro-Lift-Kit Front Lift Springs (Set of 2) for 2024-2026 Ford Ranger Raptor E30-35-066-01-20","description":"\u003cp\u003eThe Eibach Pro-Lift-Kit front springs raise the front of a 2024-2026 Ford Ranger Raptor Double Cab (3.0L twin-turbo, 4x4) by swapping the factory coil springs for taller, performance-tuned Eibach springs. The kit is a set of two front springs, sold under Eibach part number E30-35-066-01-20.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA lift that keeps the factory hardware.\u003c\/strong\u003e Rather than adding spacers or replacing the shocks, this kit changes only the springs. The factory upper mounts and control arms stay in place, so the suspension keeps its full range of travel without extra stress on bushings and ball joints.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for the Raptor's electronic shocks.\u003c\/strong\u003e Eibach states the kit is designed to work with the factory FOX electronic shocks, so you can keep the stock damping hardware you already have.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMore room for bigger tires.\u003c\/strong\u003e The added ride height opens up fender clearance for larger wheels and tires and gives you more ground clearance on the trail, while the springs are engineered to hold on-road stability and a comfortable ride.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade in the USA and backed for five years.\u003c\/strong\u003e Eibach manufactures these springs in the U.S.A. and covers them with its five-year warranty against defects in materials and workmanship.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSet of 2 front coil springs\u003c\/li\u003e\n\u003cli\u003eDesigned to be used with the factory FOX electronic shocks\u003c\/li\u003e\n\u003cli\u003eIncreases ground clearance\u003c\/li\u003e\n\u003cli\u003eAdds fender clearance for larger wheels and tires\u003c\/li\u003e\n\u003cli\u003eKeeps on-road stability and handling\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003cli\u003eFive-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEmissions:\u003c\/strong\u003e This part is a suspension component. California Prop 65 warning: Cancer and Reproductive Harm.\u003c\/p\u003e\u003cp\u003eFitment: Eibach lists this kit for the 2024-2026 Ford Ranger Raptor Double Cab with the 3.0L twin-turbo V6 and 4x4. Fitment confirmed against Eibach's published application list. Eibach does not guarantee fitment, height or warranty on unlisted applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/eibach.com\/storage\/instructions\/D4328.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/39764203660ca8a6a04949da39be253e.PDF\" target=\"_blank\" rel=\"noopener\"\u003eWarranty\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2024-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":67767770513707,"sku":"EIBE30-35-066-01-20","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/eibach-e30350660120-ranger-raptor-1.jpg?v=1795124877"},{"product_id":"eibach-pro-lift-kit-hd-rear-springs-2024-2026-ford-ranger-raptor-e30-35-066-02-02","title":"Eibach Pro-Lift-Kit HD Rear Springs (Set of 2) for 2024-2026 Ford Ranger Raptor E30-35-066-02-02","description":"\u003cp\u003eThese Eibach Pro-Lift-Kit HD rear springs are a pair of heavy-duty coil springs made for the 2024-2026 Ford Ranger Raptor Double Cab with the 3.0L twin-turbo V6 and 4x4. They raise the rear of the truck and add extra spring rate so it holds its height when you load it with cargo and gear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for a loaded Ranger Raptor.\u003c\/strong\u003e Eibach designed this HD spring to restore ride height after you add weight such as bumpers, racks, camping gear or cargo. The listed rear lift heights run from 0 lb to 500 lb of added load, and Eibach recommends running the springs only at fully loaded height, with the other heights shown for reference.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade to work with the factory shocks.\u003c\/strong\u003e The kit is designed to use the original FOX electronic shocks, so there is no shock swap to plan around. Eibach cautions that too much lift will hurt ride quality, so choose the load rating that matches how you use the truck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePairs with Eibach's Pro-Lift-Kit and Pro-Truck-Lift.\u003c\/strong\u003e Eibach's design notes say the HD rear springs are compatible with vehicles already fitted with its Pro-Lift-Kit or Pro-Truck-Lift springs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade in the USA and warranted.\u003c\/strong\u003e The springs are built in the U.S.A. and carry Eibach's five-year warranty against factory defects in material and workmanship (coatings excluded) for passenger cars and light-duty class 1-3 trucks under normal use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSet of 2 rear coil springs\u003c\/li\u003e\n\u003cli\u003eIncreased ground clearance\u003c\/li\u003e\n\u003cli\u003eMore fender clearance for larger wheels and tires\u003c\/li\u003e\n\u003cli\u003eImproved off-road capability with stable on-road handling\u003c\/li\u003e\n\u003cli\u003eDesigned for the factory FOX electronic shocks\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.; five-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEmissions:\u003c\/strong\u003e This is a suspension part and has no emissions certification. Prop 65 warning applies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e 2024-2026 Ford Ranger Raptor Double Cab, 3.0L twin-turbo V6, 4x4. Fitment confirmed against Eibach's published application list. Eibach does not guarantee fitment, height or warranty on unlisted applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/eibach.com\/storage\/instructions\/D4330.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2024-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":67767770612011,"sku":"EIBE30-35-066-02-02","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/eibach-e30350660202-ranger-raptor.jpg?v=1795125047"},{"product_id":"eibach-pro-lift-kit-rear-springs-set-of-2-2024-2026-ford-ranger-raptor-e30-35-066-03-02","title":"Eibach Pro-Lift-Kit Rear Springs Only Set of 2 for 2024-2026 Ford Ranger Raptor E30-35-066-03-02","description":"\u003cp\u003eThese Eibach Pro-Lift-Kit rear springs raise the back of a 2024-2026 Ford Ranger Raptor to give you more ground clearance and more room in the wheel wells for larger tires. The kit is a set of two rear coil springs, part number E30-35-066-03-02, built to work with the truck's stock components rather than replace them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdded ride height without a full suspension swap.\u003c\/strong\u003e Eibach designs the springs with off-road race know-how so the rear sits higher while the factory mounting points stay in use. Nothing else in the rear suspension has to be replaced to run them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade to work with the factory FOX shocks.\u003c\/strong\u003e Eibach states these springs are designed to be used with the OE FOX electronic shocks, so the Raptor's adjustable damping stays in play after the lift.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRoom for bigger tires.\u003c\/strong\u003e The extra rear height opens up fender clearance, which helps when you move to a taller or wider tire for trail use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt in the USA.\u003c\/strong\u003e Eibach makes these springs in the United States and backs them with a five-year warranty against defects in materials and workmanship, excluding coatings, under normal use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSet of 2 rear coil springs\u003c\/li\u003e\n\u003cli\u003eIncreases rear ground clearance\u003c\/li\u003e\n\u003cli\u003eAdds fender clearance for larger wheels and tires\u003c\/li\u003e\n\u003cli\u003eDesigned for use with the OE FOX electronic shocks\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eFive-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e 2024-2026 Ford Ranger Raptor Double Cab with the 3.0L twin-turbocharged V6, 4X4. Eibach does not guarantee fitment, height or warranty on applications it does not list. Fitment confirmed against Eibach's published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEmissions:\u003c\/strong\u003e Eibach lists no CARB EO number for this part. California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm (www.P65Warnings.ca.gov).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/eibach.com\/storage\/instructions\/D4562.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/eibach.com\/warranty\" target=\"_blank\" rel=\"noopener\"\u003eWarranty\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2024-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003ctd\u003eRaptor Double Cab 3.0L 4X4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":67767770808619,"sku":"EIBE30-35-066-03-02","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/eibach-e30350660302-rangerraptor-1.jpg?v=1795125030"},{"product_id":"icon-rear-bump-stop-spacer-kit-2010-2014-ford-f-150-raptor-95221","title":"ICON Rear 2.75\" Bump Stop Spacer Kit for 2010-2014 Ford F-150 Raptor 95221","description":"\u003cp\u003eThis ICON rear bump stop spacer kit (part 95221) is built for the 2010-2014 Ford F-150 SVT Raptor that runs ICON Multi-Rate Leaf Springs. It drops the factory rear bump stops by 2.75 inches so the stock stops keep working as intended after the spring swap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKeeps the factory bump stops useful.\u003c\/strong\u003e ICON's leaf springs change how the rear axle travels. These spacers move the OE bump stops down into the right spot, so you can keep using them without the springs cycling past their intended range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProtects suspension travel.\u003c\/strong\u003e With the stops repositioned, the rear suspension keeps its correct travel and gets a defined stopping point at full compression, on the road and off it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMachined from 6061 aluminum.\u003c\/strong\u003e Each spacer is CNC machined from high-strength 6061 aluminum, which gives you durability with very little added weight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStraightforward bolt-on install.\u003c\/strong\u003e The kit includes the mounting hardware, and ICON lists it as a simple bolt-on job.\u003c\/p\u003e\u003cp\u003eFeatures\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLets the stock rear bump stops be used with ICON Multi-Rate Leaf Springs\u003c\/li\u003e\n\u003cli\u003eLowers the rear bump stops 2.75\"\u003c\/li\u003e\n\u003cli\u003eCNC machined from 6061 aluminum\u003c\/li\u003e\n\u003cli\u003eMounting hardware included\u003c\/li\u003e\n\u003cli\u003eSimple bolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFitment: ICON lists this kit for 2010-2014 Ford F-150 SVT Raptor models fitted with ICON Multi-Rate Leaf Springs. Fitment confirmed against ICON Vehicle Dynamics' published product page.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/d8e8b3a579ac6ee011d178ae037b1027.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2014\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eSVT Raptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":67770692632875,"sku":"ICO95221","price":74.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/b3129f826fcff424b05e4fe7f06fc64e.jpg?v=1794951073"},{"product_id":"icon-rear-bump-stop-spacer-kit-2017-2020-ford-f-150-raptor-95226","title":"ICON Rear Bump Stop Spacer Kit 1.5\" for 2017-2020 Ford F-150 Raptor 95226","description":"\u003cp\u003eThe ICON 1.5-inch Rear Bump Stop Spacer Kit is built for 2017-2020 Ford F-150 Raptors that run ICON Multi-Rate Leaf Springs. It drops the factory rear bump stops 1.5 inches so the stock stops sit where they should once the springs are changed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKeeps correct suspension travel.\u003c\/strong\u003e ICON says the spacers reposition the stock bump stops to maintain proper travel and let you keep using the OE bump stops without over-cycling the ICON leaf springs. This kit is for trucks running the ICON Multi-Rate Leaf Springs, as ICON specifies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMachined from 6061 aluminum.\u003c\/strong\u003e Each spacer is precision CNC machined from high-strength 6061 aluminum, so it is durable and adds very little weight to the rear of the truck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBolt-on installation.\u003c\/strong\u003e The design is a straightforward bolt-on, and the mounting hardware is included in the kit, as the photo shows: two spacers and two bolts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLowers the factory rear bump stops 1.5\"\u003c\/li\u003e\n\u003cli\u003eLets the stock rear bump stops be used with ICON Multi-Rate Leaf Springs\u003c\/li\u003e\n\u003cli\u003ePrecision CNC machined from 6061 aluminum\u003c\/li\u003e\n\u003cli\u003eMounting hardware included\u003c\/li\u003e\n\u003cli\u003eSimple bolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFitment: ICON's product page title for this part says 2010-2014, but ICON's description specifies 2017-2020 Ford F-150 Raptor models equipped with ICON Multi-Rate Leaf Springs, and ICON lists a separate part for the 2010-2014 Raptor. We used the 2017-2020 application from ICON's description. Fitment confirmed against ICON's published product description.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/393fe0bf842e5e5483401b9d12cf89fe.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/27301cad0bd53dc9110ba4eebd4d7efe.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":67770694271275,"sku":"ICO95226","price":90.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/e347923d0bfedae8f0bc2668f4f89967.jpg?v=1794951106"},{"product_id":"icon-front-coilover-spacer-kit-2-25in-lift-2024-2025-ford-ranger-raptor-ivd6140","title":"ICON Front Coilover Spacer Kit 2.25in Lift for 2024-2025 Ford Ranger Raptor IVD6140","description":"\u003cp\u003eIf you want a taller, more level front end on your 2024-2025 Ford Ranger Raptor without replacing the factory shocks, this ICON 2.25 inch front coilover spacer kit is a simple way to get there. It bolts in with the original coilover assemblies and adds 2.25 inches of front lift over stock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKeeps the factory electronic shocks working.\u003c\/strong\u003e ICON designed these spacers to maintain full functionality of the stock electronic shock system, so you keep the Ranger Raptor's original damping behavior while raising the front.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRoom for bigger wheels and tires.\u003c\/strong\u003e The added height helps keep oversized tires clear of the front fenders and gives the truck a more aggressive, level stance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProtects the front suspension.\u003c\/strong\u003e ICON states the kit avoids overextending the stock front upper control arm ball joints and prevents over-cycling of the CV joints as the suspension approaches full extension.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt from billet aluminum.\u003c\/strong\u003e The spacers are CNC machined from 6061 billet aluminum with a black anodized finish for corrosion resistance, and are covered by ICON's Limited Lifetime Warranty.\u003c\/p\u003e\u003cp\u003eFeatures\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVehicle specific design for Ford Ranger Raptor equipped with OE front coilovers\u003c\/li\u003e\n\u003cli\u003eNo ball joint over extension or bind with full factory wheel travel\u003c\/li\u003e\n\u003cli\u003eIncreases front ground clearance and provides more level stance\u003c\/li\u003e\n\u003cli\u003eMaintains functionality of factory electronic shock system\u003c\/li\u003e\n\u003cli\u003eKeeps oversized tires from interfering with front fenders\u003c\/li\u003e\n\u003cli\u003eBlack anodized finish for excellent corrosion resistance\u003c\/li\u003e\n\u003cli\u003eRaises front ride height 2.25\" over stock\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061 aluminum components\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFitment: ICON lists this kit for the 2024-2025 Ford Ranger Raptor equipped with the original front coilovers. Fitment confirmed against ICON's published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/8ca0fff48f82e21a0beafc1ac03efab7.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2024-2025\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":67770711376171,"sku":"ICOIVD6140","price":127.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/d04fc08e963e2775f6f8ab9a0ca543f4.jpg?v=1794951328"},{"product_id":"fabtech-09-13-ford-f150-4wd-6in-basic-system-gen-ii-component-box-1","title":"Fabtech 09-13 Ford F150 4WD 6in Basic System Gen II - Component Box 1","description":"\u003cp\u003eFabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe Kits Are Made From The Highest Quality Materials\u003c\/li\u003e\n\u003cli\u003eGuarantee Superior Performance And Functionality\u003c\/li\u003e\n\u003cli\u003eOther Parts Required For A Complete Set\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2013\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eFX2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009-2013\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eFX4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2012\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eHarley-Davidson Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009-2013\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eKing Ranch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009-2013\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eLariat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eLariat Limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009-2013\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003ePlatinum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009-2013\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eSTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2013\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eSVT Raptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009-2013\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eXL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009-2013\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eXLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67777092583723,"sku":"FABFTS22172","price":1143.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/843fecb3d716e7de1190294452d6acb8L_bc850b07-4bbf-441d-801f-e8d9f07361cd.jpg?v=1792306728"},{"product_id":"fabtech-09-13-ford-f150-4wd-6in-lift-system-gen-ii-component-box-2","title":"Fabtech 09-13 Ford F150 4WD 6in Lift System Gen II - Component Box 2","description":"\u003cp\u003eFabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe Kits Are Made From The Highest Quality Materials\u003c\/li\u003e\n\u003cli\u003eGuarantee Superior Performance And Functionality\u003c\/li\u003e\n\u003cli\u003eOther Parts Required For A Complete Set\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2013\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eFX2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009-2013\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eFX4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2012\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eHarley-Davidson Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009-2013\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eKing Ranch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009-2013\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eLariat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eLariat Limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009-2013\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003ePlatinum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009-2013\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eSTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2013\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eSVT Raptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009-2013\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eXL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009-2013\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eXLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67777092649259,"sku":"FABFTS22173","price":815.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/149884e4c6b1c60655a0109e04bc5df5L.jpg?v=1792108957"},{"product_id":"fabtech-21-24-ford-bronco-4wd-3in-ball-joint-upper-control-arm-kit","title":"Fabtech 21-24 Ford Bronco 4WD 3in Ball Joint Upper Control Arm Kit","description":"\u003cp\u003eFabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSimplified Design With Fast Install\u003c\/li\u003e\n\u003cli\u003eSteering Knuckles Retain Proper ESC\u003c\/li\u003e\n\u003cli\u003eNo Loss Of Ground Clearance\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eBadlands\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2023\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eBig Bend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2024\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eBlack Diamond\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2024\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eEverglades\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eFirst Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2024\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eHeritage Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2024\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eHeritage Limited Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eOuter Banks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2024\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2024\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eWildtrak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67777094779179,"sku":"FABFTS22337","price":674.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/72f0801e8c029d3add1ac7da2305d415L.jpg?v=1792108967"},{"product_id":"superlift-04-18-ford-f-150-4wd-4-5-6in-lift-kit-bilstein-shock-box","title":"Superlift 04-18 Ford F-150 4WD 4.5-6in Lift Kit Bilstein Shock Box","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eEstablished in 1975, Superlift remains a pioneer in the industry, and is one of the few suspension companies operated by true truck and off-road enthusiasts. We are passionate about trucks, wheeling and an outdoor lifestyle that go hand-in-hand. We can talk the talk because we walk the walk.This question.... ''What's best for the customer?''... is always at the top of our list in everything we do, from product planning and design to customer service. This simple guiding principal has served us well for decades, and will continue to guide us into the future.We are proud to provide the truck, Jeep and SUV owner products that perform better than advertised. We understand that most people spend the majority of their windshield time on-road, and our designs reflect this. You will be 100% satisfied with our products on-road or off - we guarantee it! Determining what product is right for your vehicle and lifestyle can be a complicated task, especially with so many companies and options to choose from. We urge you to carefully research your purchase. Most lift kits represent a considerable investment, and you will literally live with your choice for years. Talk to fellow off-roaders, and your local automotive specialty shop before making a purchase. We love to talk shop, and we encourage you to give our tech staff a call. Bottom line... if you do your homework, you'll discover that we've done ours.\u003c\/p\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/d9d90b06e25e050164ac704c8467335c.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eBilstein Shock Box - 4.5-6 inch Lift Kit\u003c\/li\u003e\n\u003cli\u003eBilstein 5100 Series Shock Absorber\u003c\/li\u003e\n\u003cli\u003eBilstein 5100 Series Shocks\u003c\/li\u003e\n\u003cli\u003eShock Warranty - 1 Year\u003c\/li\u003e\n\u003cli\u003e2 Shocks\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2014\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eFX2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004-2014\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eFX4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006-2008,2010-2012\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eHarley-Davidson Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2005-2024\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eKing Ranch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004-2024\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eLariat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eLariat Limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013-2014,2016-2023\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009-2024\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003ePlatinum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018-2024\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003ePolice Responder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2024\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2024\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eSSV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004-2014,2024\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eSTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2014\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eSVT Raptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eTHE 60TH ANNIVERSARY EDITION\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2024\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eTremor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004-2024\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eXL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004-2024\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eXLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Superlift","offers":[{"title":"Default Title","offer_id":67783755596075,"sku":"SLF84058","price":279.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/3ffe6e0d66e19583058ff377a9bae8d8.jpg?v=1792157518"},{"product_id":"zone-offroad-2021-ford-bronco-2-4-door-2in-lift-kit-badlands-and-sasquatch","title":"Zone Offroad 2021 Ford Bronco 2\/4 Door 2in Lift Kit - (Badlands and Sasquatch)","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eBuilding off the impressive design and capability of the new Ford Bronco with its on the 4-corner coilover design, the team at Zone Offroad are offering a 2\" lift solution designed for the Badlands trim and Sasquatch-equipped 20201 Ford Broncos. These new 2\" lift kits are lift and level the stance eliminating the factory nose-low rake and allowing clearance for up to 35\" tires. This new kit is designed to take advantage of the impressive travel on the new Bronco utilizing top mounted strut spacers to raise the stance without sacrificing ride quality or overall driveability. The spacers are built from heavy duty semi-aromatic glass-fiber reinforced nylon resin design, offering strength and a clean OE appearance once installed. Additionally supplied for the front a set of spring perch spacers to level out the front stance as well as bump stops extensions which allow you to get the lift without overextending the suspension-steering\/driveline operating angles allowing for extreme use. Rounding out the kit is replacement hardware along with step-by-step instructions allowing you to bolt-on this 2\" lift kit within a few hours. Optional Adventure Pro Series Upper Control Arms are available for additional strength and performance. Give your Bronco a boost with Zone Offroad.\u003c\/p\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/cd2babe809bfde07550412037216a3bf.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTop-mount design along with spring perch spacer and bump stop extension to provide lift, while maintaining ride quality\u003c\/li\u003e\n\u003cli\u003eLifts and levels stance without affecting ride quality or drivability\u003c\/li\u003e\n\u003cli\u003eDesigned to work within the operating limits of the factory UCA\u003c\/li\u003e\n\u003cli\u003eAllows clearance for larger 35\" tire\/wheel\/tire packages\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2025\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eBadlands\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2023,2025\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2025\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eBig Bend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2024\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eBlack Diamond\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2024\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eEverglades\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eFirst Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2025\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eHeritage Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2024\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eHeritage Limited Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2025\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eOuter Banks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2025\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2025\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eStroppe Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2024\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eWildtrak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Zone Offroad","offers":[{"title":"Default Title","offer_id":67784845951275,"sku":"ZORZONF1221","price":159.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/623e253bc9eefb4bcabbca9b923d3fd7L.jpg?v=1792168608"},{"product_id":"eibach-pro-lift-kit-rear-springs-2021-2026-ford-f-150-raptor-raptor-r-e30-35-060-02-02","title":"Eibach Pro-Lift-Kit Rear Springs for 2021-2026 Ford F-150 Raptor and 2023-2026 Ford F-150 Raptor R E30-35-060-02-02","description":"\u003cp\u003eThese Eibach Pro-Lift-Kit rear springs raise the back of a third-generation Ford F-150 Raptor without coilovers or spacers. The set of two coil springs replaces the factory rear springs, adds ride height and tire clearance, and works with the truck's factory FOX electronic shocks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLift without extra stress.\u003c\/strong\u003e Because the kit swaps the springs themselves, the rear axle keeps its full range of suspension travel. The Pro-Lift-Kit is built to keep the stock upper mounts and control arms, so the suspension geometry stays close to what Ford designed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade for the Raptor's electronic shocks.\u003c\/strong\u003e Eibach states the springs are designed to be used with the original FOX electronic shocks, so you do not need to replace your dampers to install them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRoom for bigger tires.\u003c\/strong\u003e The added height gives more fender clearance for larger wheels and tires, and more ground clearance on trails. Eibach lists these springs for Raptors running either 35 in or 37 in tires.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt in the USA.\u003c\/strong\u003e Eibach makes the springs in the United States using technology from its off-road race program, and backs them with a five-year warranty against defects in materials and workmanship (coatings excluded).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSet of 2 rear coil springs\u003c\/li\u003e\n\u003cli\u003eIncreased ground clearance\u003c\/li\u003e\n\u003cli\u003eMore fender clearance for larger wheels and tires\u003c\/li\u003e\n\u003cli\u003eDesigned to use the factory FOX electronic shocks\u003c\/li\u003e\n\u003cli\u003eRetains the stock upper mounts and control arms\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A. with a five-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. See www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003eFitment: 2021-2026 Ford F-150 Raptor (3.5L EcoBoost, 4WD, 35 in or 37 in) and 2023-2026 Ford F-150 Raptor R (5.2L supercharged, 4WD). Fitment confirmed against Eibach's published application list. Eibach does not guarantee fitment on applications it does not list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/eibach.com\/storage\/instructions\/D4098.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/eibach.com\/warranty\" target=\"_blank\" rel=\"noopener\"\u003eWarranty\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":67795554992427,"sku":"EIBE30-35-060-02-02","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/eibach-e30350600202-raptor3g-1.jpg?v=1795125519"}],"url":"https:\/\/raptorsonly.com\/collections\/lift-kits.oembed","provider":"RaptorsOnly.com","version":"1.0","type":"link"}