{"title":"F-150 Raptor 2nd Gen (2017–2020) – Wheels \u0026 Tires – Wheels","description":null,"products":[{"product_id":"icon-rebound-17x8-5-6x135-6mm-offset-bronze-wheel-2017-2026-ford-f-150-raptor-bronco-raptor-1817856350br","title":"ICON Rebound 17x8.5 6x135 6mm Offset 5in BS 87.1mm Bore Bronze Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor 1817856350BR","description":"\u003cp\u003eThe ICON Rebound 17x8.5 wheel in bronze pairs a concave eight-spoke design with ICON-optimized dimensions. This listing is the 17 x 8.5, 6x135 bolt pattern, 6mm offset version with 5in of backspacing and an 87.1mm center bore. It is listed here for the F-150 Raptor, Raptor R and Bronco Raptor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt around ICON-optimized dimensions.\u003c\/strong\u003e ICON says the Rebound is engineered to maximize brake caliper clearance and to position the wheel for unhindered suspension travel and steering. Its backspacing and offset are set to reduce scrub radius, which ICON ties to better handling and ride quality, and it is meant to complement an ICON Vehicle Dynamics suspension system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAluminum alloy construction.\u003c\/strong\u003e ICON describes the Rebound as aluminum alloy construction with strength properties well suited to off-road use, and says the reduced unsprung weight and rotating mass improve on- and off-road performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications (as published by ICON).\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize: 17x8.5\u003c\/li\u003e\n\u003cli\u003eBolt pattern: 6x135\u003c\/li\u003e\n\u003cli\u003eOffset: 6mm\u003c\/li\u003e\n\u003cli\u003eBackspacing: 5in\u003c\/li\u003e\n\u003cli\u003eCenter bore: 87.1mm\u003c\/li\u003e\n\u003cli\u003eFinish: Bronze\u003c\/li\u003e\n\u003cli\u003eICON part number: 1817856350BR\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConcave eight-spoke Rebound design in bronze\u003c\/li\u003e\n\u003cli\u003eAluminum alloy construction suited to off-road use\u003c\/li\u003e\n\u003cli\u003eReduced unsprung weight and rotating mass for better on- and off-road performance\u003c\/li\u003e\n\u003cli\u003eApplication-specific dimensions to optimize vehicle dynamics and tire clearance\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e ICON publishes this wheel as 17 x 8.5, 6x135 with a 6mm offset and 5in backspacing and does not name vehicles. It is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore or larger: the 2017-2026 F-150 Raptor, the 2023-2026 F-150 Raptor R and the 2022-2026 Bronco Raptor. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs. This wheel's 87.1mm bore matches that 87.1 mm hub. The lug thread on these trucks is M14x1.5, and lug nuts are not listed with this wheel.\u003c\/p\u003e\u003cp\u003eThis wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/5091fce9ea74cc07c57b0d3f8319175d.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":67770301284651,"sku":"ICO1817856350BR","price":265.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/a478328fc0498e64df743ee54a555edc_3ecc653c-4834-4643-a784-a8fdbfe0fd90.jpg?v=1794959218"},{"product_id":"icon-rebound-18x9-6x135-6mm-offset-double-black-wheel-2017-2026-ford-f-150-raptor-bronco-raptor-1818906352db","title":"ICON Rebound 18x9 6x135 6mm Offset 5.25in BS 87.1mm Bore Double Black Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor 1818906352DB","description":"\u003cp\u003eThe ICON Rebound 18x9 wheel in double black pairs a concave eight-spoke design with ICON-optimized dimensions. This listing is the 18 x 9, 6x135 bolt pattern, 6mm offset version with 5.25in of backspacing and an 87.1mm center bore. It is listed here for the F-150 Raptor, Raptor R and Bronco Raptor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt around ICON-optimized dimensions.\u003c\/strong\u003e ICON says the Rebound is engineered to maximize brake caliper clearance and to position the wheel for unhindered suspension travel and steering. Its backspacing and offset are set to reduce scrub radius, which ICON ties to better handling and ride quality, and it is meant to complement an ICON Vehicle Dynamics suspension system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAluminum alloy construction.\u003c\/strong\u003e ICON describes the Rebound as aluminum alloy construction with strength properties well suited to off-road use, and says the reduced unsprung weight and rotating mass improve on- and off-road performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications (as published by ICON).\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize: 18x9\u003c\/li\u003e\n\u003cli\u003eBolt pattern: 6x135\u003c\/li\u003e\n\u003cli\u003eOffset: 6mm\u003c\/li\u003e\n\u003cli\u003eBackspacing: 5.25in\u003c\/li\u003e\n\u003cli\u003eCenter bore: 87.1mm\u003c\/li\u003e\n\u003cli\u003eFinish: Double Black\u003c\/li\u003e\n\u003cli\u003eICON part number: 1818906352DB\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConcave eight-spoke Rebound design in double black\u003c\/li\u003e\n\u003cli\u003eAluminum alloy construction suited to off-road use\u003c\/li\u003e\n\u003cli\u003eReduced unsprung weight and rotating mass for better on- and off-road performance\u003c\/li\u003e\n\u003cli\u003eApplication-specific dimensions to optimize vehicle dynamics and tire clearance\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e ICON publishes this wheel as 18 x 9, 6x135 with a 6mm offset and 5.25in backspacing and does not name vehicles. It is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore or larger: the 2017-2026 F-150 Raptor, the 2023-2026 F-150 Raptor R and the 2022-2026 Bronco Raptor. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs. This wheel's 87.1mm bore matches that 87.1 mm hub. The lug thread on these trucks is M14x1.5, and lug nuts are not listed with this wheel.\u003c\/p\u003e\u003cp\u003eThis wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/5091fce9ea74cc07c57b0d3f8319175d.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":67770309869867,"sku":"ICO1818906352DB","price":302.92,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/65900b0e920a542edc423efae1fba677_ffc665b6-83c8-4f83-b31a-966596d285e5.jpg?v=1794962323"},{"product_id":"icon-compression-17x8-5-6x135-6mm-offset-bronze-wheel-2017-2026-ford-f-150-raptor-bronco-raptor-2017856350br","title":"ICON Compression 17x8.5 6x135 6mm Offset 5in BS 87.1mm Bore Bronze Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor 2017856350BR","description":"\u003cp\u003eThe ICON Compression 17x8.5 in bronze is a 6x135 wheel from ICON Alloys with a 6mm offset, 5in backspacing and an 87.1 mm center bore. It is listed here for the Ford Raptor models that use a 6x135 bolt pattern: the 2017-2026 F-150 Raptor, the 2023-2026 F-150 Raptor R and the 2022-2026 Bronco Raptor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStyling with a purpose.\u003c\/strong\u003e ICON describes the Compression as combining sharp lines, a concave spoke design and \"ICON-optimized\" dimensions to improve both the form and the function of a Jeep, truck or SUV.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDimensions tuned for the suspension.\u003c\/strong\u003e ICON engineered the Compression to maximize caliper clearance and optimize wheel position for unhindered suspension travel and steering function. Backspacing and offset were set to reduce scrub radius, which ICON says improves handling and ride quality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHub fit.\u003c\/strong\u003e The 87.1 mm center bore matches the 87.1 mm hub listed for these Raptors, so the wheel centers on the hub without rings. These Raptors use M14x1.5 lug nuts, and ICON's page does not list lug nuts with this wheel, so order them separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e17x8.5 size with a 6x135 bolt pattern\u003c\/li\u003e\n\u003cli\u003e6mm offset and 5in backspacing\u003c\/li\u003e\n\u003cli\u003e87.1 mm center bore\u003c\/li\u003e\n\u003cli\u003eBronze finish\u003c\/li\u003e\n\u003cli\u003eConcave spoke design with ICON-optimized dimensions\u003c\/li\u003e\n\u003cli\u003eBackspacing set to maximize caliper clearance and reduce scrub radius\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e ICON publishes this wheel as 17x8.5, 6x135 with a 6mm offset and 5in backspacing and does not name vehicles. It is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore or larger; the 87.1 mm bore comes from the supplier listing. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs (6x135, 87.1 mm). It is not listed for the Ranger Raptor, which uses 6x139.7.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOffset note:\u003c\/strong\u003e This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/5091fce9ea74cc07c57b0d3f8319175d.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":67770328547627,"sku":"ICO2017856350BR","price":270.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/cf8cb53a0aee5d399a28f2111b2ad5fd_6a46996c-d24a-4cbe-9567-a78447e842ee.jpg?v=1794959265"},{"product_id":"icon-vector-6-17x8-5-6x135-6mm-offset-5in-bs-87-1mm-bore-satin-black-wheel-2017-2026-ford-f-150-raptor-bronco-raptor-2417856350sb","title":"ICON Vector 6 17x8.5 6x135 6mm Offset 5in BS 87.1mm Bore Satin Black Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor 2417856350SB","description":"\u003cp\u003eThe ICON Alloys Vector 6 is a 17x8.5 wheel with sharp lines, a concave spoke design and \"ICON-optimized\" dimensions, finished in Satin Black. It uses a 6x135 bolt pattern with a 6mm offset, 5in backspacing and an 87.1mm center bore.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt around fit and clearance.\u003c\/strong\u003e ICON says the Vector 6 is engineered to maximize caliper clearance and position the wheel for unhindered suspension travel and steering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBackspacing and offset set for handling.\u003c\/strong\u003e ICON developed the backspacing and offset to reduce scrub radius, which it says improves overall handling and ride quality, and makes the wheel a good complement to an ICON Vehicle Dynamics suspension system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize: 17 x 8.5\u003c\/li\u003e\n\u003cli\u003eBolt pattern: 6 x 135\u003c\/li\u003e\n\u003cli\u003eOffset: 6mm; backspacing 5in\u003c\/li\u003e\n\u003cli\u003eCenter bore: 87.1mm\u003c\/li\u003e\n\u003cli\u003eFinish: Satin Black\u003c\/li\u003e\n\u003cli\u003eLoad rating: 2,750 lb per ICON's wheel table\u003c\/li\u003e\n\u003cli\u003eAluminum alloy construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e ICON publishes this wheel as 17 x 8.5, 6x135 with a 6mm offset and 5in backspacing and does not name vehicles. It is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1mm center bore or larger: the 2017-2026 F-150 Raptor, the 2023-2026 F-150 Raptor R and the 2022-2026 Bronco Raptor. This wheel's 87.1mm bore matches the factory bore. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs. These Raptors use M14x1.5 lug nuts, and wheels are sold without lug nuts unless listed. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/5091fce9ea74cc07c57b0d3f8319175d.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":67770374422827,"sku":"ICO2417856350SB","price":245.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/6426c458d690832f3ded4c6778fb7510_b67fb198-edb4-4a7c-911e-c3f8edb59cef.jpg?v=1795020145"},{"product_id":"icon-hulse-17x8-5-6x135-6mm-offset-5in-bs-silver-machined-wheel-for-2017-2026-ford-f-150-raptor-2023-2026-f-150-raptor-r-2022-2026-bronco-raptor-8017856350sm","title":"ICON Hulse 17x8.5 6x135 6mm Offset 5in BS Silver Machined Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor 8017856350SM","description":"\u003cp\u003eThe ICON Alloys Hulse is a motorsport-inspired wheel with an aggressive concave profile, twelve deep spokes, a thick lip and oversized ring bolts. This listing is the Silver Machined finish in 17 x 8.5 inch, 6x135, 6mm offset, 5 inch backspacing. Fitted here as a Ford Raptor wheel by bolt pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt around ICON's wheel approach.\u003c\/strong\u003e ICON engineers each wheel to maximize caliper clearance and to optimize wheel position for unhindered suspension travel and steering function. Backspacing and offset are chosen to reduce scrub radius, which ICON says improves handling and ride quality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDesign and finish.\u003c\/strong\u003e ICON offers the Hulse in Double Black and Silver Machined finishes, with fitments for both 6-lug and 5-lug applications. This one is Silver Machined.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAggressive concave profile with twelve deep spokes\u003c\/li\u003e\n\u003cli\u003eThick lip with oversized ring bolts\u003c\/li\u003e\n\u003cli\u003eEngineered to maximize caliper clearance and optimize wheel position for suspension travel and steering function\u003c\/li\u003e\n\u003cli\u003eBackspacing and offset set to reduce scrub radius\u003c\/li\u003e\n\u003cli\u003e17 x 8.5 inch, 6x135 bolt pattern, 6mm offset, 5 inch backspacing\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e ICON publishes this wheel as 17 x 8.5 inch, 6x135 bolt pattern, 6mm offset, 5 inch backspacing and does not name vehicles. It is listed for the Ford Raptor models that use a 6x135 bolt pattern: the 2017-2026 F-150 Raptor, 2023-2026 F-150 Raptor R and 2022-2026 Bronco Raptor. ICON and the supplier do not publish a center bore for this part; the supplier's own application list names the 2017-2026 F-150 Raptor, and Ford's Raptor hub is 87.1 mm, so confirm the bore is 87.1 mm or larger (a hub-centric ring fills any gap) before ordering. Fitment decided by bolt pattern against Ford's Raptor hub specs; the center bore is not confirmed. These Raptors take M14x1.5 lug nuts; ICON's page does not list lug nuts with this wheel, so check what ships with it before you order.\u003c\/p\u003e\u003cp\u003eThis wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/5091fce9ea74cc07c57b0d3f8319175d.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":67770656489771,"sku":"ICO8017856350SM","price":236.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/0a6d4b3ccef453cfa115e11d910d6072_dce589a2-54d0-4adc-b97c-7e1b09db7f5e.jpg?v=1794965165"},{"product_id":"icon-rancho-20x9-6x135-16mm-offset-5-625in-bs-satin-bronze-w-gloss-black-lip-wheel-for-2017-2026-ford-f-150-raptor-2023-2026-f-150-raptor-r-2022-2026-bronco-raptor-8420906356sbgb","title":"ICON Rancho 20x9 6x135 16mm Offset 5.625in BS Satin Bronze w\/ Gloss Black Lip Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor 8420906356SBGB","description":"\u003cp\u003eThe ICON Alloys Rancho is a solidly built 20 inch wheel meant to stand up on the street or the trail. This listing is the Satin Bronze w\/ Gloss Black Lip finish in 20 x 9 inch, 6x135, 16mm offset, 5.625 inch backspacing. Fitted here as a Ford Raptor wheel by bolt pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt around ICON's wheel approach.\u003c\/strong\u003e ICON engineers each wheel to maximize caliper clearance and to optimize wheel position for unhindered suspension travel and steering function. Backspacing and offset are chosen to reduce scrub radius, which ICON says improves handling and ride quality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDesign and finish.\u003c\/strong\u003e ICON offers the Rancho in Double Black, Satin Bronze with Gloss Black Lip, and Silver Machined with Gloss Black Lip finishes. This one is Satin Bronze w\/ Gloss Black Lip.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e20 inch diameter, 9 inch width\u003c\/li\u003e\n\u003cli\u003eEngineered to maximize caliper clearance and optimize wheel position for suspension travel and steering function\u003c\/li\u003e\n\u003cli\u003eBackspacing and offset set to reduce scrub radius\u003c\/li\u003e\n\u003cli\u003e20 x 9 inch, 6x135 bolt pattern, 16mm offset, 5.625 inch backspacing\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e ICON publishes this wheel as 20 x 9 inch, 6x135 bolt pattern, 16mm offset, 5.625 inch backspacing and does not name vehicles. It is listed for the Ford Raptor models that use a 6x135 bolt pattern: the 2017-2026 F-150 Raptor, 2023-2026 F-150 Raptor R and 2022-2026 Bronco Raptor. ICON and the supplier do not publish a center bore for this part; the supplier's own application list names the 2017-2026 F-150 Raptor, and Ford's Raptor hub is 87.1 mm, so confirm the bore is 87.1 mm or larger (a hub-centric ring fills any gap) before ordering. Fitment decided by bolt pattern against Ford's Raptor hub specs; the center bore is not confirmed. These Raptors take M14x1.5 lug nuts; ICON's page does not list lug nuts with this wheel, so check what ships with it before you order.\u003c\/p\u003e\u003cp\u003eThis wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/5091fce9ea74cc07c57b0d3f8319175d.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":67770664386859,"sku":"ICO8420906356SBGB","price":327.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/365dc0eaf3770d0549d112c325805b38_3f80033c-f38c-4891-91c5-69d579bf0a06.jpg?v=1794965852"},{"product_id":"icon-rancho-20x9-6x135-16mm-offset-5-625in-bs-silver-machined-w-gloss-black-lip-wheel-for-2017-2026-ford-f-150-raptor-2023-2026-f-150-raptor-r-2022-2026-bronco-raptor-8420906356smgb","title":"ICON Rancho 20x9 6x135 16mm Offset 5.625in BS Silver Machined w\/ Gloss Black Lip Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor 8420906356SMGB","description":"\u003cp\u003eThe ICON Alloys Rancho is a solidly built 20 inch wheel meant to stand up on the street or the trail. This listing is the Silver Machined w\/ Gloss Black Lip finish in 20 x 9 inch, 6x135, 16mm offset, 5.625 inch backspacing. Fitted here as a Ford Raptor wheel by bolt pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt around ICON's wheel approach.\u003c\/strong\u003e ICON engineers each wheel to maximize caliper clearance and to optimize wheel position for unhindered suspension travel and steering function. Backspacing and offset are chosen to reduce scrub radius, which ICON says improves handling and ride quality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDesign and finish.\u003c\/strong\u003e ICON offers the Rancho in Double Black, Satin Bronze with Gloss Black Lip, and Silver Machined with Gloss Black Lip finishes. This one is Silver Machined w\/ Gloss Black Lip.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e20 inch diameter, 9 inch width\u003c\/li\u003e\n\u003cli\u003eEngineered to maximize caliper clearance and optimize wheel position for suspension travel and steering function\u003c\/li\u003e\n\u003cli\u003eBackspacing and offset set to reduce scrub radius\u003c\/li\u003e\n\u003cli\u003e20 x 9 inch, 6x135 bolt pattern, 16mm offset, 5.625 inch backspacing\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e ICON publishes this wheel as 20 x 9 inch, 6x135 bolt pattern, 16mm offset, 5.625 inch backspacing and does not name vehicles. It is listed for the Ford Raptor models that use a 6x135 bolt pattern: the 2017-2026 F-150 Raptor, 2023-2026 F-150 Raptor R and 2022-2026 Bronco Raptor. ICON and the supplier do not publish a center bore for this part; the supplier's own application list names the 2017-2026 F-150 Raptor, and Ford's Raptor hub is 87.1 mm, so confirm the bore is 87.1 mm or larger (a hub-centric ring fills any gap) before ordering. Fitment decided by bolt pattern against Ford's Raptor hub specs; the center bore is not confirmed. These Raptors take M14x1.5 lug nuts; ICON's page does not list lug nuts with this wheel, so check what ships with it before you order.\u003c\/p\u003e\u003cp\u003eThis wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/5091fce9ea74cc07c57b0d3f8319175d.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":67770665894187,"sku":"ICO8420906356SMGB","price":327.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/84a2da32b712c7577bc7d9097d21a73e_1b98ba54-aad5-4396-bdc3-1ec2bc567b52.jpg?v=1794965865"},{"product_id":"bbs-ts-c-17x9-6x135-satin-bronze-wheel-ts-c179089p0002","title":"BBS TS-C 17x9 6x135 0mm Offset 4.5in BS 87.1mm Bore Satin Bronze Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor TS-C179089P0002","description":"\u003cp\u003eThe BBS TS-C is a 17x9 off-road wheel in Satin Bronze, drilled 6x135 with an 87.1 mm center bore and a 0 mm offset. We list it for the Ford Raptors that use the 6x135 bolt pattern: the 2017-2026 F-150 Raptor, the 2023-2026 F-150 Raptor R and the 2022-2026 Bronco Raptor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat BBS publishes.\u003c\/strong\u003e BBS's TS-C Applications PDF lists this wheel (part number TS-C179089P0002) as 17 inch diameter, 9 inch width, 6x135, 87.1 center bore, 0 offset, Satin Bronze, with a load figure of 2500 lb. BBS introduces its TS wheels as 17, 18 and 20 inch off-road wheels for trucks and SUVs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBackspacing (computed).\u003c\/strong\u003e BBS does not publish backspacing. Computed from the 9 inch width and the 0 mm offset (width \/ 2 + offset \/ 25.4), it is 4.5 in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCenter bore.\u003c\/strong\u003e The 87.1 mm bore matches the 87.1 mm hub size in Ford's Raptor 6x135 specs, so no hub rings are needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOffset.\u003c\/strong\u003e This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on these Raptors is about +34 mm; this wheel is 0 mm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLug nuts.\u003c\/strong\u003e Lug nuts are not included. These Raptors use M14x1.5 studs, and BBS does not state a lug seat type for this wheel, so confirm the correct nuts before installing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e BBS's warranty page states that structural manufacturing defects are covered for 10 years and the painted finish for 2 years. The warranty is void after impact damage or if the application is not approved by BBS.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e17x9 with 6x135 bolt pattern and 87.1 mm center bore\u003c\/li\u003e\n\u003cli\u003e0 mm offset, 4.5 in computed backspacing\u003c\/li\u003e\n\u003cli\u003eSatin Bronze finish\u003c\/li\u003e\n\u003cli\u003eLoad figure of 2500 lb in BBS's Application PDF\u003c\/li\u003e\n\u003cli\u003eBBS TS series off-road wheel for trucks and SUVs\u003c\/li\u003e\n\u003cli\u003e10-year structural and 2-year finish warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e BBS publishes this wheel's specifications (size, bolt pattern, center bore, offset) but no vehicle list for its off-road wheels. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x135 with a bore of at least 87.1 mm fits the F-150 Raptor, F-150 Raptor R and Bronco Raptor. Bore per BBS Application PDF. Check brake, fender and suspension clearance before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/www.bbs-usa.com\/bbs_offroad\/TSC_Apps_171820.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTS-C Applications PDF\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"BBS","offers":[{"title":"Default Title","offer_id":67776676495659,"sku":"BBSTS-C179089P0002","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/TSC_17x9_ET0_Satin_Bronze_lg_c833ac12-099c-4dd7-87be-0dab42b6dbd4.jpg?v=1795143433"},{"product_id":"bbs-ts-m-17x9-6x135-satin-black-wheel-ts-m179089n1201","title":"BBS TS-M 17x9 6x135 -12mm Offset 4.03in BS 87.1mm Bore Satin Black Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor TS-M179089N1201","description":"\u003cp\u003eThe BBS TS-M is a 17x9 off-road wheel in Satin Black, drilled 6x135 with an 87.1 mm center bore and a -12 mm offset. We list it for the Ford Raptors that use the 6x135 bolt pattern: the 2017-2026 F-150 Raptor, the 2023-2026 F-150 Raptor R and the 2022-2026 Bronco Raptor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat BBS publishes.\u003c\/strong\u003e BBS's TS-M Applications PDF lists this wheel (part number TS-M179089N1201) as 17 inch diameter, 9 inch width, 6x135, 87.1 center bore, -12 offset, Satin Black, with a load figure of 2500 lb. BBS introduces its TS wheels as 17, 18 and 20 inch off-road wheels for trucks and SUVs. The photo is BBS's picture of the TS-M design in Satin Black (shown in 18x9); this listing is the 17x9.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBackspacing (computed).\u003c\/strong\u003e BBS does not publish backspacing. Computed from the 9 inch width and the -12 mm offset (width \/ 2 + offset \/ 25.4), it is about 4.03 in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCenter bore.\u003c\/strong\u003e The 87.1 mm bore matches the 87.1 mm hub size in Ford's Raptor 6x135 specs, so no hub rings are needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOffset.\u003c\/strong\u003e This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on these Raptors is about +34 mm; this wheel is -12 mm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLug nuts.\u003c\/strong\u003e Lug nuts are not included. These Raptors use M14x1.5 studs, and BBS does not state a lug seat type for this wheel, so confirm the correct nuts before installing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e BBS's warranty page states that structural manufacturing defects are covered for 10 years and the painted finish for 2 years. The warranty is void after impact damage or if the application is not approved by BBS.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e17x9 with 6x135 bolt pattern and 87.1 mm center bore\u003c\/li\u003e\n\u003cli\u003e-12 mm offset, about 4.03 in computed backspacing\u003c\/li\u003e\n\u003cli\u003eSatin Black finish\u003c\/li\u003e\n\u003cli\u003eLoad figure of 2500 lb in BBS's Application PDF\u003c\/li\u003e\n\u003cli\u003eBBS TS series off-road wheel for trucks and SUVs\u003c\/li\u003e\n\u003cli\u003e10-year structural and 2-year finish warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e BBS publishes this wheel's specifications (size, bolt pattern, center bore, offset) but no vehicle list for its off-road wheels. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x135 with a bore of at least 87.1 mm fits the F-150 Raptor, F-150 Raptor R and Bronco Raptor. Bore per BBS Application PDF. Check brake, fender and suspension clearance before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/www.bbs-usa.com\/bbs_offroad\/TSM_Apps_171820.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTS-M Applications PDF\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"BBS","offers":[{"title":"Default Title","offer_id":67776676954411,"sku":"BBSTS-M179089N1201","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/TSM_18x9_ET12_Satin_Black_lg_bb51db7c-af0c-455a-aebd-8e41cf935cb7.jpg?v=1795143485"},{"product_id":"bbs-ts-m-17x9-6x135-satin-black-wheel-ts-m179089p0001","title":"BBS TS-M 17x9 6x135 0mm Offset 4.5in BS 87.1mm Bore Satin Black Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor TS-M179089P0001","description":"\u003cp\u003eThe BBS TS-M is a 17x9 off-road wheel in Satin Black, drilled 6x135 with an 87.1 mm center bore and a 0 mm offset. We list it for the Ford Raptors that use the 6x135 bolt pattern: the 2017-2026 F-150 Raptor, the 2023-2026 F-150 Raptor R and the 2022-2026 Bronco Raptor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat BBS publishes.\u003c\/strong\u003e BBS's TS-M Applications PDF lists this wheel (part number TS-M179089P0001) as 17 inch diameter, 9 inch width, 6x135, 87.1 center bore, 0 offset, Satin Black, with a load figure of 2500 lb. BBS introduces its TS wheels as 17, 18 and 20 inch off-road wheels for trucks and SUVs. The photo is BBS's picture of the TS-M design in Satin Black (shown in 18x9); this listing is the 17x9.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBackspacing (computed).\u003c\/strong\u003e BBS does not publish backspacing. Computed from the 9 inch width and the 0 mm offset (width \/ 2 + offset \/ 25.4), it is 4.5 in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCenter bore.\u003c\/strong\u003e The 87.1 mm bore matches the 87.1 mm hub size in Ford's Raptor 6x135 specs, so no hub rings are needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOffset.\u003c\/strong\u003e This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on these Raptors is about +34 mm; this wheel is 0 mm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLug nuts.\u003c\/strong\u003e Lug nuts are not included. These Raptors use M14x1.5 studs, and BBS does not state a lug seat type for this wheel, so confirm the correct nuts before installing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e BBS's warranty page states that structural manufacturing defects are covered for 10 years and the painted finish for 2 years. The warranty is void after impact damage or if the application is not approved by BBS.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e17x9 with 6x135 bolt pattern and 87.1 mm center bore\u003c\/li\u003e\n\u003cli\u003e0 mm offset, 4.5 in computed backspacing\u003c\/li\u003e\n\u003cli\u003eSatin Black finish\u003c\/li\u003e\n\u003cli\u003eLoad figure of 2500 lb in BBS's Application PDF\u003c\/li\u003e\n\u003cli\u003eBBS TS series off-road wheel for trucks and SUVs\u003c\/li\u003e\n\u003cli\u003e10-year structural and 2-year finish warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e BBS publishes this wheel's specifications (size, bolt pattern, center bore, offset) but no vehicle list for its off-road wheels. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x135 with a bore of at least 87.1 mm fits the F-150 Raptor, F-150 Raptor R and Bronco Raptor. Bore per BBS Application PDF. Check brake, fender and suspension clearance before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/www.bbs-usa.com\/bbs_offroad\/TSM_Apps_171820.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTS-M Applications PDF\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"BBS","offers":[{"title":"Default Title","offer_id":67776677019947,"sku":"BBSTS-M179089P0001","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/TSM_18x9_ET12_Satin_Black_lg_102a68bd-e140-45bb-9c8c-c4cc74ceccc0.jpg?v=1795143494"},{"product_id":"bbs-ts-m-17x9-6x135-satin-bronze-wheel-ts-m179089p0002","title":"BBS TS-M 17x9 6x135 0mm Offset 4.5in BS 87.1mm Bore Satin Bronze Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor TS-M179089P0002","description":"\u003cp\u003eThe BBS TS-M is a 17x9 off-road wheel in Satin Bronze, drilled 6x135 with an 87.1 mm center bore and a 0 mm offset. We list it for the Ford Raptors that use the 6x135 bolt pattern: the 2017-2026 F-150 Raptor, the 2023-2026 F-150 Raptor R and the 2022-2026 Bronco Raptor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat BBS publishes.\u003c\/strong\u003e BBS's TS-M Applications PDF lists this wheel (part number TS-M179089P0002) as 17 inch diameter, 9 inch width, 6x135, 87.1 center bore, 0 offset, Satin Bronze, with a load figure of 2500 lb. BBS introduces its TS wheels as 17, 18 and 20 inch off-road wheels for trucks and SUVs. The photo is BBS's picture of the TS-M design in Satin Bronze (shown in 18x9); this listing is the 17x9.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBackspacing (computed).\u003c\/strong\u003e BBS does not publish backspacing. Computed from the 9 inch width and the 0 mm offset (width \/ 2 + offset \/ 25.4), it is 4.5 in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCenter bore.\u003c\/strong\u003e The 87.1 mm bore matches the 87.1 mm hub size in Ford's Raptor 6x135 specs, so no hub rings are needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOffset.\u003c\/strong\u003e This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on these Raptors is about +34 mm; this wheel is 0 mm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLug nuts.\u003c\/strong\u003e Lug nuts are not included. These Raptors use M14x1.5 studs, and BBS does not state a lug seat type for this wheel, so confirm the correct nuts before installing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e BBS's warranty page states that structural manufacturing defects are covered for 10 years and the painted finish for 2 years. The warranty is void after impact damage or if the application is not approved by BBS.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e17x9 with 6x135 bolt pattern and 87.1 mm center bore\u003c\/li\u003e\n\u003cli\u003e0 mm offset, 4.5 in computed backspacing\u003c\/li\u003e\n\u003cli\u003eSatin Bronze finish\u003c\/li\u003e\n\u003cli\u003eLoad figure of 2500 lb in BBS's Application PDF\u003c\/li\u003e\n\u003cli\u003eBBS TS series off-road wheel for trucks and SUVs\u003c\/li\u003e\n\u003cli\u003e10-year structural and 2-year finish warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e BBS publishes this wheel's specifications (size, bolt pattern, center bore, offset) but no vehicle list for its off-road wheels. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x135 with a bore of at least 87.1 mm fits the F-150 Raptor, F-150 Raptor R and Bronco Raptor. Bore per BBS Application PDF. Check brake, fender and suspension clearance before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/www.bbs-usa.com\/bbs_offroad\/TSM_Apps_171820.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTS-M Applications PDF\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"BBS","offers":[{"title":"Default Title","offer_id":67776677118251,"sku":"BBSTS-M179089P0002","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/TSM_18x9_ET12_Satin_Bronze_lg_8d8fa578-609c-4d2f-90f0-aed926b93154.jpg?v=1795143503"},{"product_id":"bbs-ts-m-17x9-6x135-satin-silver-wheel-ts-m179089p0003","title":"BBS TS-M 17x9 6x135 0mm Offset 4.5in BS 87.1mm Bore Satin Silver Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor TS-M179089P0003","description":"\u003cp\u003eThe BBS TS-M in Satin Silver is a 17x9 wheel drilled 6x135 with an 87.1 mm center bore and a 0 mm offset. BBS lists it in its TS off-road wheel range for trucks and SUVs. On RaptorsOnly.com it is matched to the Ford Raptors that share the 6x135 bolt pattern and 87.1 mm hub: the F-150 Raptor, the F-150 Raptor R and the Bronco Raptor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade to match the Raptor hub.\u003c\/strong\u003e BBS lists this wheel with a 6x135 bolt pattern and an 87.1 mm center bore. That is the pattern and hub size Ford uses on these trucks, so the wheel centers on the hub without adapters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWide 9 inch stance.\u003c\/strong\u003e At 17x9 with a 0 mm offset, the wheel sits further out than the factory wheel and gives a wider, more aggressive look. BBS does not publish backspacing for this wheel; computed from its published width and offset it is about 4.5 in (9 in \/ 2 + 0 mm \/ 25.4).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBacked by BBS.\u003c\/strong\u003e BBS states that its wheels are warranted against structural manufacturing defects for 10 years and against finish manufacturing defects for 2 years on painted wheels. BBS notes the warranty is void if the application is not approved by BBS, if the wheel shows impact damage, or if the wheel is altered.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize: 17x9 in\u003c\/li\u003e\n\u003cli\u003eBolt pattern: 6x135\u003c\/li\u003e\n\u003cli\u003eCenter bore: 87.1 mm\u003c\/li\u003e\n\u003cli\u003eOffset: 0 mm\u003c\/li\u003e\n\u003cli\u003eBackspacing: about 4.5 in (computed, not published by BBS)\u003c\/li\u003e\n\u003cli\u003eFinish: Satin Silver\u003c\/li\u003e\n\u003cli\u003eLoad rating: 2,500 lb as listed by BBS\u003c\/li\u003e\n\u003cli\u003eBBS part number: TS-M179089P0003\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e BBS publishes this wheel as 17x9, 6x135, 87.1 mm center bore, 0 mm offset, Satin Silver, and lists wheel specifications only, with no vehicle list. It is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm hub. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per BBS Application PDF. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.\u003c\/p\u003e\u003cp\u003eLug nuts are not part of BBS's listing for this wheel. The F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 lug studs, so choose nuts to match that thread and the wheel's seat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/www.bbs-usa.com\/bbs_offroad\/TSM_Apps_171820.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBBS TS-M Applications (PDF)\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"BBS","offers":[{"title":"Default Title","offer_id":67776677216555,"sku":"BBSTS-M179089P0003","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/TSM_18x9_ET12_Satin_Silver_lg.jpg?v=1795143434"},{"product_id":"bbs-ts-p-17x9-6x135-satin-black-wheel-ts-p179089p0001","title":"BBS TS-P 17x9 6x135 0mm Offset 4.5in BS 87.1mm Bore Satin Black Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor TS-P179089P0001","description":"\u003cp\u003eThe BBS TS-P in Satin Black is a 17x9 wheel drilled 6x135 with an 87.1 mm center bore and a 0 mm offset. BBS lists it in its TS off-road wheel range for trucks and SUVs. On RaptorsOnly.com it is matched to the Ford Raptors that share the 6x135 bolt pattern and 87.1 mm hub: the F-150 Raptor, the F-150 Raptor R and the Bronco Raptor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade to match the Raptor hub.\u003c\/strong\u003e BBS lists this wheel with a 6x135 bolt pattern and an 87.1 mm center bore. That is the pattern and hub size Ford uses on these trucks, so the wheel centers on the hub without adapters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWide 9 inch stance.\u003c\/strong\u003e At 17x9 with a 0 mm offset, the wheel sits further out than the factory wheel and gives a wider, more aggressive look. BBS does not publish backspacing for this wheel; computed from its published width and offset it is about 4.5 in (9 in \/ 2 + 0 mm \/ 25.4).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBacked by BBS.\u003c\/strong\u003e BBS states that its wheels are warranted against structural manufacturing defects for 10 years and against finish manufacturing defects for 2 years on painted wheels. BBS notes the warranty is void if the application is not approved by BBS, if the wheel shows impact damage, or if the wheel is altered.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize: 17x9 in\u003c\/li\u003e\n\u003cli\u003eBolt pattern: 6x135\u003c\/li\u003e\n\u003cli\u003eCenter bore: 87.1 mm\u003c\/li\u003e\n\u003cli\u003eOffset: 0 mm\u003c\/li\u003e\n\u003cli\u003eBackspacing: about 4.5 in (computed, not published by BBS)\u003c\/li\u003e\n\u003cli\u003eFinish: Satin Black\u003c\/li\u003e\n\u003cli\u003eLoad rating: 2,500 lb as listed by BBS\u003c\/li\u003e\n\u003cli\u003eBBS part number: TS-P179089P0001\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e BBS publishes this wheel as 17x9, 6x135, 87.1 mm center bore, 0 mm offset, Satin Black, and lists wheel specifications only, with no vehicle list. It is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm hub. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per BBS Application PDF. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.\u003c\/p\u003e\u003cp\u003eLug nuts are not part of BBS's listing for this wheel. The F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 lug studs, so choose nuts to match that thread and the wheel's seat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/www.bbs-usa.com\/bbs_offroad\/TSP_Apps_171820.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBBS TS-P Applications (PDF)\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"BBS","offers":[{"title":"Default Title","offer_id":67776678035755,"sku":"BBSTS-P179089P0001","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/TSP_20x9_ET12_Satin_Black_lg.jpg?v=1795143448"},{"product_id":"bbs-ts-p-17x9-6x135-satin-bronze-wheel-ts-p179089p0002","title":"BBS TS-P 17x9 6x135 0mm Offset 4.5in BS 87.1mm Bore Satin Bronze Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor TS-P179089P0002","description":"\u003cp\u003eThe BBS TS-P in Satin Bronze is a 17x9 wheel drilled 6x135 with an 87.1 mm center bore and a 0 mm offset. BBS lists it in its TS off-road wheel range for trucks and SUVs. On RaptorsOnly.com it is matched to the Ford Raptors that share the 6x135 bolt pattern and 87.1 mm hub: the F-150 Raptor, the F-150 Raptor R and the Bronco Raptor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade to match the Raptor hub.\u003c\/strong\u003e BBS lists this wheel with a 6x135 bolt pattern and an 87.1 mm center bore. That is the pattern and hub size Ford uses on these trucks, so the wheel centers on the hub without adapters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWide 9 inch stance.\u003c\/strong\u003e At 17x9 with a 0 mm offset, the wheel sits further out than the factory wheel and gives a wider, more aggressive look. BBS does not publish backspacing for this wheel; computed from its published width and offset it is about 4.5 in (9 in \/ 2 + 0 mm \/ 25.4).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBacked by BBS.\u003c\/strong\u003e BBS states that its wheels are warranted against structural manufacturing defects for 10 years and against finish manufacturing defects for 2 years on painted wheels. BBS notes the warranty is void if the application is not approved by BBS, if the wheel shows impact damage, or if the wheel is altered.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize: 17x9 in\u003c\/li\u003e\n\u003cli\u003eBolt pattern: 6x135\u003c\/li\u003e\n\u003cli\u003eCenter bore: 87.1 mm\u003c\/li\u003e\n\u003cli\u003eOffset: 0 mm\u003c\/li\u003e\n\u003cli\u003eBackspacing: about 4.5 in (computed, not published by BBS)\u003c\/li\u003e\n\u003cli\u003eFinish: Satin Bronze\u003c\/li\u003e\n\u003cli\u003eLoad rating: 2,500 lb as listed by BBS\u003c\/li\u003e\n\u003cli\u003eBBS part number: TS-P179089P0002\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e BBS publishes this wheel as 17x9, 6x135, 87.1 mm center bore, 0 mm offset, Satin Bronze, and lists wheel specifications only, with no vehicle list. It is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm hub. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per BBS Application PDF. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.\u003c\/p\u003e\u003cp\u003eLug nuts are not part of BBS's listing for this wheel. The F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 lug studs, so choose nuts to match that thread and the wheel's seat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/www.bbs-usa.com\/bbs_offroad\/TSP_Apps_171820.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBBS TS-P Applications (PDF)\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"BBS","offers":[{"title":"Default Title","offer_id":67776678101291,"sku":"BBSTS-P179089P0002","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/TSP_20x9_ET12_Satin_Bronze_lg.jpg?v=1795143459"},{"product_id":"bbs-ts-p-18x9-6x135-satin-silver-wheel-ts-p189089p0003","title":"BBS TS-P 18x9 6x135 0mm Offset 4.5in BS 87.1mm Bore Satin Silver Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor TS-P189089P0003","description":"\u003cp\u003eThe BBS TS-P in Satin Silver is an 18x9 wheel drilled 6x135 with an 87.1 mm center bore and a 0 mm offset. BBS lists it in its TS off-road wheel range for trucks and SUVs. On RaptorsOnly.com it is matched to the Ford Raptors that share the 6x135 bolt pattern and 87.1 mm hub: the F-150 Raptor, the F-150 Raptor R and the Bronco Raptor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade to match the Raptor hub.\u003c\/strong\u003e BBS lists this wheel with a 6x135 bolt pattern and an 87.1 mm center bore. That is the pattern and hub size Ford uses on these trucks, so the wheel centers on the hub without adapters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWide 9 inch stance.\u003c\/strong\u003e At 18x9 with a 0 mm offset, the wheel sits further out than the factory wheel and gives a wider, more aggressive look. BBS does not publish backspacing for this wheel; computed from its published width and offset it is about 4.5 in (9 in \/ 2 + 0 mm \/ 25.4).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBacked by BBS.\u003c\/strong\u003e BBS states that its wheels are warranted against structural manufacturing defects for 10 years and against finish manufacturing defects for 2 years on painted wheels. BBS notes the warranty is void if the application is not approved by BBS, if the wheel shows impact damage, or if the wheel is altered.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize: 18x9 in\u003c\/li\u003e\n\u003cli\u003eBolt pattern: 6x135\u003c\/li\u003e\n\u003cli\u003eCenter bore: 87.1 mm\u003c\/li\u003e\n\u003cli\u003eOffset: 0 mm\u003c\/li\u003e\n\u003cli\u003eBackspacing: about 4.5 in (computed, not published by BBS)\u003c\/li\u003e\n\u003cli\u003eFinish: Satin Silver\u003c\/li\u003e\n\u003cli\u003eLoad rating: 2,500 lb as listed by BBS\u003c\/li\u003e\n\u003cli\u003eBBS part number: TS-P189089P0003\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e BBS publishes this wheel as 18x9, 6x135, 87.1 mm center bore, 0 mm offset, Satin Silver, and lists wheel specifications only, with no vehicle list. It is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm hub. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per BBS Application PDF. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.\u003c\/p\u003e\u003cp\u003eLug nuts are not part of BBS's listing for this wheel. The F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 lug studs, so choose nuts to match that thread and the wheel's seat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/www.bbs-usa.com\/bbs_offroad\/TSP_Apps_171820.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBBS TS-P Applications (PDF)\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"BBS","offers":[{"title":"Default Title","offer_id":67776678560043,"sku":"BBSTS-P189089P0003","price":449.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/TSP_20x9_ET12_Satin_Silver_lg.jpg?v=1795143769"},{"product_id":"bbs-ts-r-17x9-6x135-satin-black-wheel-ts-r179089n1201","title":"BBS TS-R 17x9 6x135 -12mm Offset 4.03in BS 87.1mm Bore Satin Black Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor TS-R179089N1201","description":"\u003cp\u003eThe BBS TS-R in Satin Black is a 17x9 wheel drilled 6x135 with an 87.1 mm center bore and a -12 mm offset. BBS lists it in its TS off-road wheel range for trucks and SUVs. On RaptorsOnly.com it is matched to the Ford Raptors that share the 6x135 bolt pattern and 87.1 mm hub: the F-150 Raptor, the F-150 Raptor R and the Bronco Raptor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade to match the Raptor hub.\u003c\/strong\u003e BBS lists this wheel with a 6x135 bolt pattern and an 87.1 mm center bore. That is the pattern and hub size Ford uses on these trucks, so the wheel centers on the hub without adapters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWide 9 inch stance, deep negative offset.\u003c\/strong\u003e At 17x9 with a -12 mm offset, the wheel sits well out from the factory position and gives a wide, aggressive look. BBS does not publish backspacing for this wheel; computed from its published width and offset it is about 4.03 in (9 in \/ 2 - 12 mm \/ 25.4).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBacked by BBS.\u003c\/strong\u003e BBS states that its wheels are warranted against structural manufacturing defects for 10 years and against finish manufacturing defects for 2 years on painted wheels. BBS notes the warranty is void if the application is not approved by BBS, if the wheel shows impact damage, or if the wheel is altered.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize: 17x9 in\u003c\/li\u003e\n\u003cli\u003eBolt pattern: 6x135\u003c\/li\u003e\n\u003cli\u003eCenter bore: 87.1 mm\u003c\/li\u003e\n\u003cli\u003eOffset: -12 mm\u003c\/li\u003e\n\u003cli\u003eBackspacing: about 4.03 in (computed, not published by BBS)\u003c\/li\u003e\n\u003cli\u003eFinish: Satin Black\u003c\/li\u003e\n\u003cli\u003eLoad rating: 2,500 lb as listed by BBS\u003c\/li\u003e\n\u003cli\u003eBBS part number: TS-R179089N1201\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e BBS publishes this wheel as 17x9, 6x135, 87.1 mm center bore, -12 mm offset, Satin Black, and lists wheel specifications only, with no vehicle list. It is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm hub. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per BBS Application PDF. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.\u003c\/p\u003e\u003cp\u003eLug nuts are not part of BBS's listing for this wheel. The F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 lug studs, so choose nuts to match that thread and the wheel's seat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/www.bbs-usa.com\/bbs_offroad\/TSR_Apps_171820.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBBS TS-R Applications (PDF)\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"BBS","offers":[{"title":"Default Title","offer_id":67776679084331,"sku":"BBSTS-R179089N1201","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/b7009c4ddc02e4522ece8018fde0cd6bL_0f2cd85f-4ea2-4158-ab78-36e56d029897.jpg?v=1792101270"},{"product_id":"bbs-ts-r-18x9-6x135-satin-black-wheel-ts-r189089p0001","title":"BBS TS-R 18x9 6x135 0mm Offset 4.5in BS 87.1mm Bore Satin Black Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor TS-R189089P0001","description":"\u003cp\u003eThe BBS TS-R in Satin Black is an 18x9 wheel drilled 6x135 with an 87.1 mm center bore and a 0 mm offset. BBS lists it in its TS off-road wheel range for trucks and SUVs. On RaptorsOnly.com it is matched to the Ford Raptors that share the 6x135 bolt pattern and 87.1 mm hub: the F-150 Raptor, the F-150 Raptor R and the Bronco Raptor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade to match the Raptor hub.\u003c\/strong\u003e BBS lists this wheel with a 6x135 bolt pattern and an 87.1 mm center bore. That is the pattern and hub size Ford uses on these trucks, so the wheel centers on the hub without adapters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWide 9 inch stance.\u003c\/strong\u003e At 18x9 with a 0 mm offset, the wheel sits further out than the factory wheel and gives a wider, more aggressive look. BBS does not publish backspacing for this wheel; computed from its published width and offset it is about 4.5 in (9 in \/ 2 + 0 mm \/ 25.4).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBacked by BBS.\u003c\/strong\u003e BBS states that its wheels are warranted against structural manufacturing defects for 10 years and against finish manufacturing defects for 2 years on painted wheels. BBS notes the warranty is void if the application is not approved by BBS, if the wheel shows impact damage, or if the wheel is altered.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize: 18x9 in\u003c\/li\u003e\n\u003cli\u003eBolt pattern: 6x135\u003c\/li\u003e\n\u003cli\u003eCenter bore: 87.1 mm\u003c\/li\u003e\n\u003cli\u003eOffset: 0 mm\u003c\/li\u003e\n\u003cli\u003eBackspacing: about 4.5 in (computed, not published by BBS)\u003c\/li\u003e\n\u003cli\u003eFinish: Satin Black\u003c\/li\u003e\n\u003cli\u003eLoad rating: 2,500 lb as listed by BBS\u003c\/li\u003e\n\u003cli\u003eBBS part number: TS-R189089P0001\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e BBS publishes this wheel as 18x9, 6x135, 87.1 mm center bore, 0 mm offset, Satin Black, and lists wheel specifications only, with no vehicle list. It is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm hub. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per BBS Application PDF. This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.\u003c\/p\u003e\u003cp\u003eLug nuts are not part of BBS's listing for this wheel. The F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 lug studs, so choose nuts to match that thread and the wheel's seat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/www.bbs-usa.com\/bbs_offroad\/TSR_Apps_171820.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBBS TS-R Applications (PDF)\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"BBS","offers":[{"title":"Default Title","offer_id":67776679510315,"sku":"BBSTS-R189089P0001","price":449.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/9ff3d16aceb98a19a648e090c74ad058L_2485dc07-2660-45e4-b6dc-ea8a751cafe0.jpg?v=1792101276"},{"product_id":"enkei-rpt1-17x9-6x135-matte-dark-gunmetallic-wheel-528-790-9512gm","title":"Enkei RPT1 17x9 6x135 Bolt Pattern +12 Offset 87.1 Bore Matte Dark Gunmetallic Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor 528-790-9512GM","description":"\u003cp\u003eThe Enkei RPT1 is the truck and SUV version of Enkei's RPF1 racing wheel. It keeps the clean split-spoke design, and Enkei says it is built to higher loading capacities to suit 6-lug trucks and SUVs. This is the 17x9 size, drilled 6x135 with a +12 mm offset, in matte dark gunmetal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTruck-ready split-spoke design.\u003c\/strong\u003e Enkei says the RPT1 carries the RPF1 look to trucks and SUVs, and calls it one of the lightest and toughest truck wheels on the market.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMAT construction.\u003c\/strong\u003e Enkei builds the RPT1 with its MAT (Most Advanced Technology) process, which combines one-piece cast wheel technology with a rim-forming (spinning) process.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpec-E testing.\u003c\/strong\u003e Enkei engineered its own Spec-E test standard, which is tougher than the JWL standard: the impact test uses a higher drop point and the rotary bending and dynamic radial fatigue tests run 20% more cycles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatched by bolt pattern and center bore.\u003c\/strong\u003e The 6x135 pattern is the pattern used by the F-150 Raptor, F-150 Raptor R and Bronco Raptor, and the 87.1 mm center bore matches the 87.1 mm Ford hub, so no hub-centric rings are needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e17x9 size, 6x135 bolt pattern, +12 mm offset\u003c\/li\u003e\n\u003cli\u003e87.1 mm center bore\u003c\/li\u003e\n\u003cli\u003eMatte dark gunmetal finish\u003c\/li\u003e\n\u003cli\u003eSplit-spoke design from the RPF1\u003c\/li\u003e\n\u003cli\u003eMAT construction and Spec-E inspected by Enkei\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Enkei lists the RPT1 17x9, inset 12 as a 6x135 size marked Raptor on its RPT1 page. It is listed here for the 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R and 2022-2026 Bronco Raptor because those trucks use a 6x135 bolt pattern and an 87.1 mm hub, and this wheel's bore matches it. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs. It is not listed for the 2010-2014 SVT Raptor because Enkei names no model years. Bore per the Turn14 supplier listing (Enkei's page does not state bore). A retailer listing (Tire Discounters, SKU 5287909512GM) shows the same 6x135 wheel with an ET0 offset; this listing uses Enkei's +12.\u003c\/p\u003e\u003cp\u003eThis wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on these trucks is about +34 mm.\u003c\/p\u003e\u003cp\u003eWheels are sold without lug nuts (Enkei's page does not list any with this wheel). The F-150 Raptor (2017 and newer), Raptor R and Bronco Raptor use M14x1.5 lug studs, so order matching lug nuts separately.\u003c\/p\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Enkei","offers":[{"title":"Default Title","offer_id":67776739279147,"sku":"ENK528-790-9512GM","price":264.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/ENKEI-RPT1-GM-166-WEB_abfb918b-deb0-45a9-af21-7759cc20cba0.jpg?v=1795147140"},{"product_id":"enkei-trail-finder-20x9-6x135-matte-black-wheel-558-290-9520bk","title":"Enkei Trail-Finder 20x9 \/ 6x135 BP \/ ET20 \/ 87.1mm Bore - Matte Black Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor 558-290-9520BK","description":"\u003cp\u003eThe Enkei Trail-Finder is a six-spoke truck wheel that Enkei builds for adventure driving without giving up everyday style. This is the 20x9 version in matte black, drilled 6x135 with a +20 mm offset, and Enkei lists the Trail-Finder line as Spec-E inspected.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for trails and daily driving.\u003c\/strong\u003e Enkei describes the Trail-Finder as a rugged six-spoke wheel that blends off-road durability with a modern, sporty look.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpec-E testing.\u003c\/strong\u003e Enkei engineered its own Spec-E test standard, which is tougher than the JWL standard: the impact test uses a higher drop point and the rotary bending and dynamic radial fatigue tests run 20% more cycles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatched by bolt pattern and center bore.\u003c\/strong\u003e The 6x135 pattern is the pattern used by the F-150 Raptor, F-150 Raptor R and Bronco Raptor, and the 87.1 mm center bore matches the 87.1 mm Ford hub, so no hub-centric rings are needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e20x9 size, 6x135 bolt pattern, +20 mm offset\u003c\/li\u003e\n\u003cli\u003e87.1 mm center bore\u003c\/li\u003e\n\u003cli\u003eMatte black finish\u003c\/li\u003e\n\u003cli\u003eSix-spoke design\u003c\/li\u003e\n\u003cli\u003eSpec-E inspected line\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Enkei's Trail-Finder page names no vehicles, and its size table lists 6x135 only in 17x9 and 18x9 (the 20x9 appears there as 6x139.7). The 20x9, 6x135, ET20 size and the 87.1 mm bore for this part number come from the Turn14 supplier listing, and Tire Discounters lists the same size and bore under this SKU. It is listed for the 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R and 2022-2026 Bronco Raptor because those trucks use a 6x135 bolt pattern and an 87.1 mm hub, and this wheel's bore matches it. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs. It is not listed for the 2010-2014 SVT Raptor because Enkei names no vehicles.\u003c\/p\u003e\u003cp\u003eThis wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on these trucks is about +34 mm.\u003c\/p\u003e\u003cp\u003eWheels are sold without lug nuts (Enkei's page does not list any with this wheel). The F-150 Raptor (2017 and newer), Raptor R and Bronco Raptor use M14x1.5 lug studs, so order matching lug nuts separately.\u003c\/p\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Enkei","offers":[{"title":"Default Title","offer_id":67776742654251,"sku":"ENK558-290-9520BK","price":300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/Trail-Finder-BK-3_e1a06d41-7a91-4ae2-9927-06b60ea9b5fd.jpg?v=1795147046"},{"product_id":"enkei-trail-finder-17x9-6x135-matte-black-wheel-558-790-9512bk","title":"Enkei Trail-Finder 17x9 \/ 6x135 BP \/ ET12 \/ 87.1mm Bore - Matte Black Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor 558-790-9512BK","description":"\u003cp\u003eThe Enkei Trail-Finder is a six-spoke truck wheel that Enkei builds for adventure driving without giving up everyday style. This is the 17x9 version in matte black, drilled 6x135 with a +12 mm offset, and Enkei lists the Trail-Finder as Spec-E inspected.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for trails and daily driving.\u003c\/strong\u003e Enkei describes the Trail-Finder as a rugged six-spoke wheel that blends off-road durability with a modern, sporty look.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpec-E testing.\u003c\/strong\u003e Enkei engineered its own Spec-E test standard, which is tougher than the JWL standard: the impact test uses a higher drop point and the rotary bending and dynamic radial fatigue tests run 20% more cycles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatched by bolt pattern and center bore.\u003c\/strong\u003e The 6x135 pattern is the pattern used by the F-150 Raptor, F-150 Raptor R and Bronco Raptor, and the 87.1 mm center bore matches the 87.1 mm Ford hub, so no hub-centric rings are needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e17x9 size, 6x135 bolt pattern, +12 mm offset\u003c\/li\u003e\n\u003cli\u003e87.1 mm center bore\u003c\/li\u003e\n\u003cli\u003eMatte black finish\u003c\/li\u003e\n\u003cli\u003eSix-spoke design\u003c\/li\u003e\n\u003cli\u003eSpec-E inspected by Enkei\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Enkei publishes this wheel as 17x9, 6x135, inset 12 on its Trail-Finder page and does not name vehicles. It is listed for the 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R and 2022-2026 Bronco Raptor because those trucks use a 6x135 bolt pattern and an 87.1 mm hub, and this wheel's bore matches it. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs. It is not listed for the 2010-2014 SVT Raptor because Enkei names no vehicles. Bore per the Turn14 supplier listing (Enkei's page does not state bore); Tire Discounters lists the same 87.1 mm bore under this SKU.\u003c\/p\u003e\u003cp\u003eThis wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on these trucks is about +34 mm.\u003c\/p\u003e\u003cp\u003eWheels are sold without lug nuts (Enkei's page does not list any with this wheel). The F-150 Raptor (2017 and newer), Raptor R and Bronco Raptor use M14x1.5 lug studs, so order matching lug nuts separately.\u003c\/p\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Enkei","offers":[{"title":"Default Title","offer_id":67776743178539,"sku":"ENK558-790-9512BK","price":207.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/Trail-Finder-BK-3_717227a3-14b2-4dca-ad68-dfb1a106bf0b.jpg?v=1795147031"},{"product_id":"enkei-trail-finder-17x9-6x135-matte-bronze-wheel-558-790-9512zp","title":"Enkei Trail-Finder 17x9 \/ 6x135 BP \/ ET12 \/ 87.1mm Bore - Matte Bronze Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor 558-790-9512ZP","description":"\u003cp\u003eThe Enkei Trail-Finder is a six-spoke truck wheel that Enkei builds for adventure driving without giving up everyday style. This is the 17x9 version in matte bronze, drilled 6x135 with a +12 mm offset, and Enkei lists the Trail-Finder as Spec-E inspected.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for trails and daily driving.\u003c\/strong\u003e Enkei describes the Trail-Finder as a rugged six-spoke wheel that blends off-road durability with a modern, sporty look.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpec-E testing.\u003c\/strong\u003e Enkei engineered its own Spec-E test standard, which is tougher than the JWL standard: the impact test uses a higher drop point and the rotary bending and dynamic radial fatigue tests run 20% more cycles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatched by bolt pattern and center bore.\u003c\/strong\u003e The 6x135 pattern is the pattern used by the F-150 Raptor, F-150 Raptor R and Bronco Raptor, and the 87.1 mm center bore matches the 87.1 mm Ford hub, so no hub-centric rings are needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e17x9 size, 6x135 bolt pattern, +12 mm offset\u003c\/li\u003e\n\u003cli\u003e87.1 mm center bore\u003c\/li\u003e\n\u003cli\u003eMatte bronze finish\u003c\/li\u003e\n\u003cli\u003eSix-spoke design\u003c\/li\u003e\n\u003cli\u003eSpec-E inspected by Enkei\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Enkei publishes this wheel as 17x9, 6x135, inset 12 on its Trail-Finder page and does not name vehicles. It is listed for the 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R and 2022-2026 Bronco Raptor because those trucks use a 6x135 bolt pattern and an 87.1 mm hub, and this wheel's bore matches it. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs. It is not listed for the 2010-2014 SVT Raptor because Enkei names no vehicles. Bore per the Turn14 supplier listing (Enkei's page does not state bore); Tire Discounters lists the same 87.1 mm bore under this SKU.\u003c\/p\u003e\u003cp\u003eThis wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory offset on these trucks is about +34 mm.\u003c\/p\u003e\u003cp\u003eWheels are sold without lug nuts (Enkei's page does not list any with this wheel). The F-150 Raptor (2017 and newer), Raptor R and Bronco Raptor use M14x1.5 lug studs, so order matching lug nuts separately.\u003c\/p\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Enkei","offers":[{"title":"Default Title","offer_id":67776743244075,"sku":"ENK558-790-9512ZP","price":207.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/Trail-Finder-ZP-3-e1781277332860_24ac99b4-6703-4d93-9da7-36c8cc47ac0e.jpg?v=1795147032"},{"product_id":"enkei-trail-finder-18x9-6x135-et12-matte-black-wheel-558-890-9512bk","title":"Enkei Trail-Finder 18x9 \/ 6x135 BP \/ ET12 \/ 87.1mm Bore - Matte Black Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 Ford F-150 Raptor R, 2022-2026 Ford Bronco Raptor 558-890-9512BK","description":"\u003cp\u003eThe Enkei Trail-Finder 18x9 in matte black is a six-spoke wheel that Enkei describes as blending off-road durability with a modern, sporty look. This listing is the 18x9, 6x135, ET12 version, part number 558-890-9512BK. It is listed here for the F-150 Raptor, F-150 Raptor R and Bronco Raptor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRugged six-spoke design.\u003c\/strong\u003e Enkei built the Trail-Finder for adventure without giving up everyday style, and offers it in matte bronze or matte black in 17, 18 and 20 inch sizes. Enkei's own page pitches it at small SUVs and crossovers, so check clearance and tire choice for your truck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpec-E tested.\u003c\/strong\u003e Enkei runs its own Spec-E test standard, which it says is tougher than the JWL requirement: a higher drop point in the impact test and 20% more cycles in the rotary bending fatigue and dynamic radial fatigue tests.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize: 18x9\u003c\/li\u003e\n\u003cli\u003eBolt pattern: 6x135\u003c\/li\u003e\n\u003cli\u003eOffset: ET12 (12 mm)\u003c\/li\u003e\n\u003cli\u003eBackspacing: 4.97 in (calculated from width and offset)\u003c\/li\u003e\n\u003cli\u003eCenter bore: 87.1 mm\u003c\/li\u003e\n\u003cli\u003eFinish: Matte Black\u003c\/li\u003e\n\u003cli\u003eEnkei part number: 558-890-9512BK\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSix-spoke Trail-Finder design in matte black\u003c\/li\u003e\n\u003cli\u003eEnkei Spec-E inspected\u003c\/li\u003e\n\u003cli\u003ePublished by Enkei as 18x9, 6X135, 12 inset\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Enkei publishes this wheel as 18x9, 6X135 with a 12 inset and does not name vehicles for it. The 6x135 pattern is used by the Ford F-150 Raptor, F-150 Raptor R and Bronco Raptor, whose hub bore is 87.1 mm, so this wheel is listed for the 2017-2026 F-150 Raptor, 2023-2026 F-150 Raptor R and 2022-2026 Bronco Raptor. This wheel's 87.1 mm center bore matches the 87.1 mm hub size. Bore per the Tire Discounters listing for this exact part number (its variant SKU matches ours); Enkei's page does not state it. These trucks use an M14x1.5 lug thread, and lug nuts are not listed with this wheel. It is not a fit for the Ranger Raptor, which uses a 6x139.7 pattern. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs.\u003c\/p\u003e\u003cp\u003eThis wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory F-150 Raptor, F-150 Raptor R and Bronco Raptor wheel is about +34 mm.\u003c\/p\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Enkei","offers":[{"title":"Default Title","offer_id":67776744030507,"sku":"ENK558-890-9512BK","price":233.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/Trail-Finder-BK-3_04290697-e260-4c8e-9c58-dda2e4b072ae.jpg?v=1795147067"},{"product_id":"enkei-trail-finder-18x9-6x135-et12-matte-bronze-wheel-558-890-9512zp","title":"Enkei Trail-Finder 18x9 \/ 6x135 BP \/ ET12 \/ 87.1mm Bore - Matte Bronze Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 Ford F-150 Raptor R, 2022-2026 Ford Bronco Raptor 558-890-9512ZP","description":"\u003cp\u003eThe Enkei Trail-Finder 18x9 in matte bronze is a six-spoke wheel that Enkei describes as blending off-road durability with a modern, sporty look. This listing is the 18x9, 6x135, ET12 version, part number 558-890-9512ZP. It is listed here for the F-150 Raptor, F-150 Raptor R and Bronco Raptor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRugged six-spoke design.\u003c\/strong\u003e Enkei built the Trail-Finder for adventure without giving up everyday style, and offers it in matte bronze or matte black in 17, 18 and 20 inch sizes. Enkei's own page pitches it at small SUVs and crossovers, so check clearance and tire choice for your truck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpec-E tested.\u003c\/strong\u003e Enkei runs its own Spec-E test standard, which it says is tougher than the JWL requirement: a higher drop point in the impact test and 20% more cycles in the rotary bending fatigue and dynamic radial fatigue tests.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize: 18x9\u003c\/li\u003e\n\u003cli\u003eBolt pattern: 6x135\u003c\/li\u003e\n\u003cli\u003eOffset: ET12 (12 mm)\u003c\/li\u003e\n\u003cli\u003eBackspacing: 4.97 in (calculated from width and offset)\u003c\/li\u003e\n\u003cli\u003eCenter bore: 87.1 mm\u003c\/li\u003e\n\u003cli\u003eFinish: Matte Bronze\u003c\/li\u003e\n\u003cli\u003eEnkei part number: 558-890-9512ZP\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSix-spoke Trail-Finder design in matte bronze\u003c\/li\u003e\n\u003cli\u003eEnkei Spec-E inspected\u003c\/li\u003e\n\u003cli\u003ePublished by Enkei as 18x9, 6X135, 12 inset\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Enkei publishes this wheel as 18x9, 6X135 with a 12 inset and does not name vehicles for it. The 6x135 pattern is used by the Ford F-150 Raptor, F-150 Raptor R and Bronco Raptor, whose hub bore is 87.1 mm, so this wheel is listed for the 2017-2026 F-150 Raptor, 2023-2026 F-150 Raptor R and 2022-2026 Bronco Raptor. This wheel's 87.1 mm center bore matches the 87.1 mm hub size. Bore per the Tire Discounters listing for this exact part number (its variant SKU matches ours); Enkei's page does not state it. These trucks use an M14x1.5 lug thread, and lug nuts are not listed with this wheel. It is not a fit for the Ranger Raptor, which uses a 6x139.7 pattern. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs.\u003c\/p\u003e\u003cp\u003eThis wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory F-150 Raptor, F-150 Raptor R and Bronco Raptor wheel is about +34 mm.\u003c\/p\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Enkei","offers":[{"title":"Default Title","offer_id":67776744096043,"sku":"ENK558-890-9512ZP","price":233.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/Trail-Finder-ZP-3-e1781277332860_1acbffd1-87ba-4687-b4c3-74da020ec094.jpg?v=1795147089"},{"product_id":"enkei-trail-tracker-18x9-6x135-et12-matte-black-wheel-560-890-9512bk","title":"Enkei Trail-Tracker 18x9 \/ 6x135 BP \/ ET12 \/ 87.1mm Bore - Matte Black Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 Ford F-150 Raptor R, 2022-2026 Ford Bronco Raptor 560-890-9512BK","description":"\u003cp\u003eThe Enkei Trail-Tracker 18x9 in matte black is a wheel Enkei built for trucks and SUVs that demand strength and durability. This listing is the 18x9, 6x135, ET12 version, part number 560-890-9512BK. It is listed here for the F-150 Raptor, F-150 Raptor R and Bronco Raptor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for work, street and trail.\u003c\/strong\u003e Enkei engineered the Trail-Tracker for the everyday demands of work, street driving and off-road adventure, and lists the Ford Raptor among the popular truck applications it is designed to fit. It is offered in matte black, matte bronze (special order) and a black machined finish in select sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpec-E tested.\u003c\/strong\u003e Enkei runs its own Spec-E test standard, which it says is tougher than the JWL requirement: a higher drop point in the impact test and 20% more cycles in the rotary bending fatigue and dynamic radial fatigue tests.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize: 18x9\u003c\/li\u003e\n\u003cli\u003eBolt pattern: 6x135\u003c\/li\u003e\n\u003cli\u003eOffset: ET12 (12 mm)\u003c\/li\u003e\n\u003cli\u003eBackspacing: 4.97 in (calculated from width and offset)\u003c\/li\u003e\n\u003cli\u003eCenter bore: 87.1 mm\u003c\/li\u003e\n\u003cli\u003eFinish: Matte Black\u003c\/li\u003e\n\u003cli\u003eEnkei part number: 560-890-9512BK\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTrail-Tracker design in matte black\u003c\/li\u003e\n\u003cli\u003eEnkei Spec-E inspected\u003c\/li\u003e\n\u003cli\u003ePublished by Enkei as 18x9, 6X135, 12 inset\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Enkei publishes this wheel as 18x9, 6X135 with a 12 inset and does not name vehicles for it. The 6x135 pattern is used by the Ford F-150 Raptor, F-150 Raptor R and Bronco Raptor, whose hub bore is 87.1 mm, so this wheel is listed for the 2017-2026 F-150 Raptor, 2023-2026 F-150 Raptor R and 2022-2026 Bronco Raptor. This wheel's 87.1 mm center bore matches the 87.1 mm hub size. Bore per the Tire Discounters listing for this exact part number (its variant SKU matches ours); Enkei's page does not state it. These trucks use an M14x1.5 lug thread, and lug nuts are not listed with this wheel. It is not a fit for the Ranger Raptor, which uses a 6x139.7 pattern. Fitment was decided by bolt pattern and center bore against Ford's Raptor hub specs.\u003c\/p\u003e\u003cp\u003eThis wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory F-150 Raptor, F-150 Raptor R and Bronco Raptor wheel is about +34 mm.\u003c\/p\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Enkei","offers":[{"title":"Default Title","offer_id":67776744620331,"sku":"ENK560-890-9512BK","price":233.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/Trail-Tracker-BK-2_74d4c65e-c85a-4425-8c68-6203bfdd1b55.jpg?v=1795147200"},{"product_id":"fifteen52-range-hd-17x8-5-6x135-asphalt-black-wheel-ghdab-178565-00","title":"fifteen52 Range HD 17x8.5 6x135 0mm ET 4.75in BS 87.1mm Center Bore Asphalt Black Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor GHDAB-178565-00","description":"\u003cp\u003eThe fifteen52 Range HD is a 17x8.5 cast aluminum wheel in Asphalt Black, drilled 6x135 with an 87.1 mm center bore. That bolt pattern and bore match the hubs on the Ford F-150 Raptor, F-150 Raptor R and Bronco Raptor, so it bolts on with no hub rings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMotorsport styling.\u003c\/strong\u003e fifteen52 calls the Range HD a true motorsport design pulled from its street line. Lightweight, concave spokes carry the look, and the RockRing outer lip stands out among simulated beadlocks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePublished specifications.\u003c\/strong\u003e Per fifteen52's Tech Specs for part GHDAB-178565-00: 17 in diameter, 8.5 in width, 6x135 bolt pattern, 0 mm offset, 4.75 in backspacing, 87.1 mm hub bore, 26.62 lb weight and a 2,500 lb load rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold individually.\u003c\/strong\u003e Each wheel comes with one color-coded 52 cap. The maker lists only the cap as included, so plan to buy lug nuts separately: the F-150 Raptor, Raptor R and Bronco Raptor use M14x1.5 studs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCast in A356-T6 aluminum alloy\u003c\/li\u003e\n\u003cli\u003eTested to SAE standards\u003c\/li\u003e\n\u003cli\u003eRockRing outer lip\u003c\/li\u003e\n\u003cli\u003eFlush-mounted, color-coded 52 cap\u003c\/li\u003e\n\u003cli\u003eTPMS compatible\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e fifteen52 publishes this wheel as 17x8.5, 6x135, 0 mm offset, 4.75 in backspacing; fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs. Bore per fifteen52's Tech Specs (87.1 mm, equal to the Raptor hub). This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.\u003c\/p\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"fifteen52","offers":[{"title":"Default Title","offer_id":67777124204843,"sku":"FFTGHDAB-178565-00","price":292.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/Range-HD-AB-QFront-View.png?v=1795143630"},{"product_id":"fifteen52-range-hd-17x8-5-6x135-magnesium-grey-wheel-ghdmg-178565-00","title":"fifteen52 Range HD 17x8.5 6x135 0mm ET 4.75in BS 87.1mm Center Bore Magnesium Grey Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor GHDMG-178565-00","description":"\u003cp\u003eThe fifteen52 Range HD is a 17x8.5 cast aluminum wheel in Magnesium Grey, drilled 6x135 with an 87.1 mm center bore. That bolt pattern and bore match the hubs on the Ford F-150 Raptor, F-150 Raptor R and Bronco Raptor, so it bolts on with no hub rings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMotorsport styling.\u003c\/strong\u003e fifteen52 calls the Range HD a true motorsport design pulled from its street line. Lightweight, concave spokes carry the look, and the RockRing outer lip stands out among simulated beadlocks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePublished specifications.\u003c\/strong\u003e Per fifteen52's Tech Specs for part GHDMG-178565-00: 17 in diameter, 8.5 in width, 6x135 bolt pattern, 0 mm offset, 4.75 in backspacing, 87.1 mm hub bore, 26.62 lb weight and a 2,500 lb load rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold individually.\u003c\/strong\u003e Each wheel comes with one color-coded 52 cap. The maker lists only the cap as included, so plan to buy lug nuts separately: the F-150 Raptor, Raptor R and Bronco Raptor use M14x1.5 studs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCast in A356-T6 aluminum alloy\u003c\/li\u003e\n\u003cli\u003eTested to SAE standards\u003c\/li\u003e\n\u003cli\u003eRockRing outer lip\u003c\/li\u003e\n\u003cli\u003eFlush-mounted, color-coded 52 cap\u003c\/li\u003e\n\u003cli\u003eTPMS compatible\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e fifteen52 publishes this wheel as 17x8.5, 6x135, 0 mm offset, 4.75 in backspacing; fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs. Bore per fifteen52's Tech Specs (87.1 mm, equal to the Raptor hub). This wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.\u003c\/p\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"fifteen52","offers":[{"title":"Default Title","offer_id":67777124401451,"sku":"FFTGHDMG-178565-00","price":296.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/Range-HD-MG-QFront-View.png?v=1795143643"},{"product_id":"mayhem-8015-warrior-20x9-6x135-6x139-7-gloss-black-milled-wheel-8015-2937m18","title":"Mayhem 8015 Warrior 20x9 6x135\/6x139.7 18mm Offset 5.71in BS 106mm Bore Gloss Black Milled Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor, 2024-2026 Ranger Raptor 8015-2937M18","description":"\u003cp\u003eThe Mayhem 8015 Warrior in gloss black milled is a 20x9 aluminum wheel drilled for both 6x135 and 6x139.7 lug patterns. That dual drilling lets it bolt onto Ford's 6x135 Raptors (F-150 Raptor, F-150 Raptor R and Bronco Raptor) and onto the 6x139.7 Ranger Raptor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecs from Mayhem.\u003c\/strong\u003e Mayhem publishes part number 8015-2937M18 as a 20x9 wheel with a +18 mm offset, 5.71 in of backspacing and a 106 mm hub bore. The wheel is rated for 2,500 lb per wheel and uses a conical lug seat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDual-drill bolt pattern.\u003c\/strong\u003e Mayhem lists the bolt pattern as 6-135 \/ 6-139.7, which means the wheel carries both sets of lug holes. Your truck uses the set that matches its hub: 6x135 for the F-150 Raptor, F-150 Raptor R and Bronco Raptor, 6x139.7 for the Ranger Raptor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHub-centric rings.\u003c\/strong\u003e The 106 mm center bore is larger than the hub on every one of these trucks (87.1 mm on the 6x135 Raptors, 93.1 mm on the Ranger Raptor), so the wheel mounts with hub-centric rings sized to your truck's hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLug nuts and center cap.\u003c\/strong\u003e The wheel is sold without lug nuts. The F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 studs and the Ranger Raptor uses M12x1.5, so buy nuts with a conical seat in the right thread. Mayhem lists center cap C108040B01 for this wheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt to carry load.\u003c\/strong\u003e Mayhem describes the line as precision-built from high-quality aluminum alloys, TPMS compatible, and backed by a lifetime structural warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e20x9, +18 mm offset, 5.71 in backspacing\u003c\/li\u003e\n\u003cli\u003eDual drilled 6x135 \/ 6x139.7 with a 106 mm hub bore\u003c\/li\u003e\n\u003cli\u003e2,500 lb load rating per wheel\u003c\/li\u003e\n\u003cli\u003eConical lug seat\u003c\/li\u003e\n\u003cli\u003eGloss black milled finish\u003c\/li\u003e\n\u003cli\u003eTPMS compatible\u003c\/li\u003e\n\u003cli\u003eLifetime structural warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Mayhem publishes this wheel as 20x9, 6-135 \/ 6-139.7, +18 mm offset, 5.71 in backspacing and does not name vehicles. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs: 6x135 with a bore of 87.1 mm or larger for the F-150 Raptor, F-150 Raptor R and Bronco Raptor, and 6x139.7 with a bore of 93.1 mm or larger for the Ranger Raptor. Bore per Mayhem's published spec row for this part number.\u003c\/p\u003e\u003cp\u003eThis wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. At +18 mm it is lower than the roughly +34 mm factory offset of the F-150 Raptor, F-150 Raptor R and Bronco Raptor, and lower than the +55 mm factory offset of the Ranger Raptor.\u003c\/p\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2024-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Mayhem","offers":[{"title":"Default Title","offer_id":67780180508971,"sku":"MAY8015-2937M18","price":260.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/mayhem8015m1_4d530e3b-fa86-4527-b016-eee67c9a69ac.png?v=1795143077"},{"product_id":"method-mr105-beadlock-17x8-5-6x135-matte-black-wheel-mr10578516500b","title":"Method MR105 Beadlock 17x8.5 6x135 0mm Offset 4.75in BS 87mm CB Matte Black w\/BH-H24125 Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor MR10578516500B","description":"\u003cp\u003eThe Method MR105 Beadlock is a 17x8.5 six-lug wheel in matte black, drilled 6x135 with a 0 mm offset and 4.75 in backspacing. Method publishes it as part number MR10578516500B and sells the MR105 as a beadlock wheel built for off-road use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBeadlock look and hardware.\u003c\/strong\u003e A ring of lip bolts around the outer rim gives the wheel its beadlock style. Method's feature list for the MR105 states a bolt-on center cap with embossed METHOD logo on 6x135 applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHub-centric 6x135 fit.\u003c\/strong\u003e The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 87 mm (nominal 87.1), so it centers on the Ford hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWheel only.\u003c\/strong\u003e Lug nuts are not included, so plan on the correct M14x1.5 nuts for these trucks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize 17x8.5, bolt pattern 6x135\u003c\/li\u003e\n\u003cli\u003eOffset 0 mm, backspacing 4.75 in\u003c\/li\u003e\n\u003cli\u003eCenter bore 87 mm (nominal 87.1)\u003c\/li\u003e\n\u003cli\u003eFinish: matte black\u003c\/li\u003e\n\u003cli\u003eBeadlock-style ring with lip bolts\u003c\/li\u003e\n\u003cli\u003eBolt-on center cap with embossed METHOD logo (per Method's feature list)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Method publishes this wheel as 17x8.5, 6x135, 0mm offset, 4.75in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per wheelwiz.ca listing for this part number (87 mm), not on Method's site.\u003c\/p\u003e\u003cp\u003eThis wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.\u003c\/p\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Method Wheels","offers":[{"title":"Default Title","offer_id":67780316430635,"sku":"MRWMR10578516500B","price":599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/method-mr105-wheel-6lug-matte-black-17x8-5-1000.jpg?v=1795144088"},{"product_id":"method-mr304-double-standard-17x8-5-6x135-machined-clear-coat-wheel-mr30478516300","title":"Method MR304 Double Standard 17x8.5 6x135 0mm Offset 4.75in BS 94mm CB Machined\/Clear Coat Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor MR30478516300","description":"\u003cp\u003eThe Method MR304 Double Standard is a 17x8.5 six-lug wheel with a machined face and clear coat, drilled 6x135 with a 0 mm offset and 4.75 in backspacing. Method publishes it as part number MR30478516300.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwelve-spoke design.\u003c\/strong\u003e Method describes the 304 as its 12 spoke design with a debossed Method logo. The lip undercut is shaped to look like a true beadlock, and the lip bolts can be replaced, with other bolt colors offered.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e6x135 fit with a larger bore.\u003c\/strong\u003e The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. This wheel's bore is listed as 94 mm, larger than Ford's 87.1 mm hub, so it needs hub-centric rings to center on the truck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLoad rating.\u003c\/strong\u003e Method's page for the 304 line states a load rating of 2,100 to 3,600 lbs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWheel only.\u003c\/strong\u003e Lug nuts are not included; these trucks use M14x1.5 nuts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize 17x8.5, bolt pattern 6x135\u003c\/li\u003e\n\u003cli\u003eOffset 0 mm, backspacing 4.75 in\u003c\/li\u003e\n\u003cli\u003eCenter bore 94 mm\u003c\/li\u003e\n\u003cli\u003eFinish: machined with clear coat\u003c\/li\u003e\n\u003cli\u003eBeadlock-style lip with replaceable bolts\u003c\/li\u003e\n\u003cli\u003ePush-through center cap with embossed METHOD logo (per Method's feature list)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Method publishes this wheel as 17x8.5, 6x135, 0mm offset, 4.75in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore or larger. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per wheelwiz.ca listing for this part number (94 mm), not on Method's site.\u003c\/p\u003e\u003cp\u003eThis wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.\u003c\/p\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Method Wheels","offers":[{"title":"Default Title","offer_id":67780318986539,"sku":"MRWMR30478516300","price":419.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/method_mr304_18x9-1509-608-00-1000.png?v=1795144140"},{"product_id":"method-mr305-nv-17x8-5-6x135-double-black-wheel-mr305785161000","title":"Method MR305 NV 17x8.5 6x135 0mm Offset 4.75in BS 94mm CB Double Black Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor MR305785161000","description":"\u003cp\u003eThe Method MR305 NV is a 17x8.5 six-lug wheel drilled 6x135 with a 0mm offset and 4.75 in backspacing. Double Black is a special-edition finish: a matte black wheel with a gloss black ring, black lip bolts and a flush push-through center cap. Method publishes it as part number MR305785161000.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMethod's NV look.\u003c\/strong\u003e The MR305 NV has a 12-window design with a debossed Method logo on either side of the center cap. Its lip undercut simulates a true beadlock wheel, and the lip bolts are replaceable, with other colors available from Method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e6x135 fit.\u003c\/strong\u003e The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 94 mm, larger than the Ford 87.1 mm hub, so it needs hub-centric rings to 87.1 mm to center on the truck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLoad rating.\u003c\/strong\u003e Method's page for the 305 NV states a load rating of 2,500-3,640 lbs for the line; it does not give a separate rating for this part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWheel only.\u003c\/strong\u003e Lug nuts are not included; the F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 nuts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize 17x8.5, bolt pattern 6x135\u003c\/li\u003e\n\u003cli\u003eOffset 0mm, backspacing 4.75 in\u003c\/li\u003e\n\u003cli\u003eCenter bore 94 mm (per wheelwiz.ca)\u003c\/li\u003e\n\u003cli\u003eDouble Black finish: matte black wheel, gloss black ring, black lip bolts\u003c\/li\u003e\n\u003cli\u003eFlush push-through center cap\u003c\/li\u003e\n\u003cli\u003e12-window design with a debossed Method logo on either side of the center cap\u003c\/li\u003e\n\u003cli\u003eReplaceable lip bolts with optional colors available from Method\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Method publishes this wheel as 17x8.5, 6x135, 0mm offset, 4.75in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore or larger. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per wheelwiz.ca listing for this part number (94 mm), not on Method's site. It is not listed for the 2010-2014 SVT Raptor.\u003c\/p\u003e\u003cp\u003eThis wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.\u003c\/p\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Method Wheels","offers":[{"title":"Default Title","offer_id":67780323737899,"sku":"MRWMR305785161000","price":419.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/method-mr305-wheel-6lug-matte-black-gloss-black-ring-17x8-5-1000_8fe1e017-5908-430a-8125-20c7238d8f34.png?v=1795144536"},{"product_id":"method-mr305-nv-17x8-5-6x135-machined-matte-black-lip-wheel-mr30578516300","title":"Method MR305 NV 17x8.5 6x135 0mm Offset 4.75in BS 94mm CB Machined - Matte Black Lip Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor MR30578516300","description":"\u003cp\u003eThe Method MR305 NV is a 17x8.5 six-lug wheel drilled 6x135 with a 0mm offset and 4.75 in backspacing. This version has a machined face with a matte black lip. Method publishes it as part number MR30578516300.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMethod's NV look.\u003c\/strong\u003e The MR305 NV has a 12-window design with a debossed Method logo on either side of the center cap. Its lip undercut simulates a true beadlock wheel, and the lip bolts are replaceable, with other colors available from Method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e6x135 fit.\u003c\/strong\u003e The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 94 mm, larger than the Ford 87.1 mm hub, so it needs hub-centric rings to 87.1 mm to center on the truck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLoad rating.\u003c\/strong\u003e Method's page for the 305 NV states a load rating of 2,500-3,640 lbs for the line; it does not give a separate rating for this part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWheel only.\u003c\/strong\u003e Lug nuts are not included; the F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 nuts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize 17x8.5, bolt pattern 6x135\u003c\/li\u003e\n\u003cli\u003eOffset 0mm, backspacing 4.75 in\u003c\/li\u003e\n\u003cli\u003eCenter bore 94 mm (per wheelwiz.ca)\u003c\/li\u003e\n\u003cli\u003eMachined face with matte black lip\u003c\/li\u003e\n\u003cli\u003e12-window design with a debossed Method logo on either side of the center cap\u003c\/li\u003e\n\u003cli\u003eReplaceable lip bolts with optional colors available from Method\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Method publishes this wheel as 17x8.5, 6x135, 0mm offset, 4.75in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore or larger. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per wheelwiz.ca listing for this part number (94 mm), not on Method's site. It is not listed for the 2010-2014 SVT Raptor.\u003c\/p\u003e\u003cp\u003eThis wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.\u003c\/p\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Method Wheels","offers":[{"title":"Default Title","offer_id":67780323836203,"sku":"MRWMR30578516300","price":419.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/MR_305_Machined-1000_b7eef58b-709a-4432-b997-929d74e35a38.jpg?v=1795144548"},{"product_id":"method-mr305-nv-17x8-5-6x135-matte-black-wheel-mr30578516500","title":"Method MR305 NV 17x8.5 6x135 0mm Offset 4.75in BS 94mm CB Matte Black Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor MR30578516500","description":"\u003cp\u003eThe Method MR305 NV is a 17x8.5 six-lug wheel drilled 6x135 with a 0mm offset and 4.75 in backspacing. This version is finished in matte black. Method publishes it as part number MR30578516500.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMethod's NV look.\u003c\/strong\u003e The MR305 NV has a 12-window design with a debossed Method logo on either side of the center cap. Its lip undercut simulates a true beadlock wheel, and the lip bolts are replaceable, with other colors available from Method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e6x135 fit.\u003c\/strong\u003e The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 94 mm, larger than the Ford 87.1 mm hub, so it needs hub-centric rings to 87.1 mm to center on the truck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLoad rating.\u003c\/strong\u003e Method's page for the 305 NV states a load rating of 2,500-3,640 lbs for the line; it does not give a separate rating for this part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWheel only.\u003c\/strong\u003e Lug nuts are not included; the F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 nuts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize 17x8.5, bolt pattern 6x135\u003c\/li\u003e\n\u003cli\u003eOffset 0mm, backspacing 4.75 in\u003c\/li\u003e\n\u003cli\u003eCenter bore 94 mm (per wheelwiz.ca)\u003c\/li\u003e\n\u003cli\u003eMatte black finish\u003c\/li\u003e\n\u003cli\u003e12-window design with a debossed Method logo on either side of the center cap\u003c\/li\u003e\n\u003cli\u003eReplaceable lip bolts with optional colors available from Method\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Method publishes this wheel as 17x8.5, 6x135, 0mm offset, 4.75in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore or larger. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per wheelwiz.ca listing for this part number (94 mm), not on Method's site. It is not listed for the 2010-2014 SVT Raptor.\u003c\/p\u003e\u003cp\u003eThis wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.\u003c\/p\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Method Wheels","offers":[{"title":"Default Title","offer_id":67780323901739,"sku":"MRWMR30578516500","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/MR_305_Matte_Black_Web_1_dd741d1c-22a5-459f-b5a1-03698b93ca70.jpg?v=1795144559"},{"product_id":"method-mr305-nv-17x8-5-6x135-titanium-matte-black-lip-wheel-mr30578516800","title":"Method MR305 NV 17x8.5 6x135 0mm Offset 4.75in BS 94mm CB Titanium - Matte Black Lip Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor MR30578516800","description":"\u003cp\u003eThe Method MR305 NV is a 17x8.5 six-lug wheel drilled 6x135 with a 0mm offset and 4.75 in backspacing. This version has a titanium face with a matte black lip. Method publishes it as part number MR30578516800.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMethod's NV look.\u003c\/strong\u003e The MR305 NV has a 12-window design with a debossed Method logo on either side of the center cap. Its lip undercut simulates a true beadlock wheel, and the lip bolts are replaceable, with other colors available from Method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e6x135 fit.\u003c\/strong\u003e The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 94 mm, larger than the Ford 87.1 mm hub, so it needs hub-centric rings to 87.1 mm to center on the truck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLoad rating.\u003c\/strong\u003e Method's page for the 305 NV states a load rating of 2,500-3,640 lbs for the line; it does not give a separate rating for this part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWheel only.\u003c\/strong\u003e Lug nuts are not included; the F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 nuts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize 17x8.5, bolt pattern 6x135\u003c\/li\u003e\n\u003cli\u003eOffset 0mm, backspacing 4.75 in\u003c\/li\u003e\n\u003cli\u003eCenter bore 94 mm (per wheelwiz.ca)\u003c\/li\u003e\n\u003cli\u003eTitanium finish with matte black lip\u003c\/li\u003e\n\u003cli\u003e12-window design with a debossed Method logo on either side of the center cap\u003c\/li\u003e\n\u003cli\u003eReplaceable lip bolts with optional colors available from Method\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Method publishes this wheel as 17x8.5, 6x135, 0mm offset, 4.75in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore or larger. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per wheelwiz.ca listing for this part number (94 mm), not on Method's site. It is not listed for the 2010-2014 SVT Raptor.\u003c\/p\u003e\u003cp\u003eThis wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.\u003c\/p\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Method Wheels","offers":[{"title":"Default Title","offer_id":67780323967275,"sku":"MRWMR30578516800","price":419.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/MR305_NV_wheel-6lug-titanium-17x8-5-1000.jpg?v=1795144569"},{"product_id":"method-mr305-nv-17x8-5-6x135-method-bronze-matte-black-lip-wheel-mr30578516900","title":"Method MR305 NV 17x8.5 6x135 0mm Offset 4.75in BS 94mm CB Method Bronze - Matte Black Lip Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor MR30578516900","description":"\u003cp\u003eThe Method MR305 NV is a 17x8.5 six-lug wheel drilled 6x135 with a 0mm offset and 4.75 in backspacing. This version has a Method Bronze face with a matte black lip. Method publishes it as part number MR30578516900.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMethod's NV look.\u003c\/strong\u003e The MR305 NV has a 12-window design with a debossed Method logo on either side of the center cap. Its lip undercut simulates a true beadlock wheel, and the lip bolts are replaceable, with other colors available from Method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e6x135 fit.\u003c\/strong\u003e The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 94 mm, larger than the Ford 87.1 mm hub, so it needs hub-centric rings to 87.1 mm to center on the truck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLoad rating.\u003c\/strong\u003e Method's page for the 305 NV states a load rating of 2,500-3,640 lbs for the line; it does not give a separate rating for this part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWheel only.\u003c\/strong\u003e Lug nuts are not included; the F-150 Raptor, F-150 Raptor R and Bronco Raptor use M14x1.5 nuts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize 17x8.5, bolt pattern 6x135\u003c\/li\u003e\n\u003cli\u003eOffset 0mm, backspacing 4.75 in\u003c\/li\u003e\n\u003cli\u003eCenter bore 94 mm (per wheelwiz.ca)\u003c\/li\u003e\n\u003cli\u003eMethod Bronze finish with matte black lip\u003c\/li\u003e\n\u003cli\u003e12-window design with a debossed Method logo on either side of the center cap\u003c\/li\u003e\n\u003cli\u003eReplaceable lip bolts with optional colors available from Method\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Method publishes this wheel as 17x8.5, 6x135, 0mm offset, 4.75in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore or larger. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per wheelwiz.ca listing for this part number (94 mm), not on Method's site. It is not listed for the 2010-2014 SVT Raptor.\u003c\/p\u003e\u003cp\u003eThis wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.\u003c\/p\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Method Wheels","offers":[{"title":"Default Title","offer_id":67780324032811,"sku":"MRWMR30578516900","price":419.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/MR305_NV_wheel_6lug_18x9-1605-964-00-1000_S-Bronze-Edit-np_686345d9-df88-4416-8eb3-bc3f04ccb25f.png?v=1795144580"},{"product_id":"method-mr305-nv-18x9-6x135-matte-black-wheel-mr30589016500","title":"Method MR305 NV 18x9 6x135 0mm Offset 5in BS 94mm CB Matte Black Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor MR30589016500","description":"\u003cp\u003eThe Method MR305 NV is an 18x9 six-lug wheel in matte black, drilled 6x135 with a 0 mm offset and 5 in backspacing. Method publishes it as part number MR30589016500 and describes the 305 NV as a 12-window design with the Method logo debossed on either side of the center cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBeadlock-style lip.\u003c\/strong\u003e The lip undercut simulates a true beadlock wheel, and the lip bolts are replaceable, with optional bolt colors available from Method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHub-centric 6x135 fit.\u003c\/strong\u003e The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 94 mm, larger than Ford's 87.1 mm hub, so hub-centric rings (94 mm to 87.1 mm) are needed to center it on the truck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLoad rating.\u003c\/strong\u003e Method states a load rating of 2,500 to 3,640 lbs for the 305 NV line, with heavy-duty 4,500 lb applications also available; that figure is for the line, not specifically for this wheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWheel only.\u003c\/strong\u003e Lug nuts are not included, so plan on the correct M14x1.5 nuts for these trucks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize 18x9, bolt pattern 6x135\u003c\/li\u003e\n\u003cli\u003eOffset 0 mm, backspacing 5 in\u003c\/li\u003e\n\u003cli\u003eCenter bore 94 mm (hub rings needed for Ford's 87.1 mm hub)\u003c\/li\u003e\n\u003cli\u003eFinish: matte black\u003c\/li\u003e\n\u003cli\u003e12-window design, debossed Method logo beside the center cap\u003c\/li\u003e\n\u003cli\u003eLip undercut with replaceable lip bolts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Method publishes this wheel as 18x9, 6x135, 0mm offset, 5in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore (or larger). Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per wheelwiz.ca listing for this part number (94 mm), not on Method's site.\u003c\/p\u003e\u003cp\u003eThis wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.\u003c\/p\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Method Wheels","offers":[{"title":"Default Title","offer_id":67780330357035,"sku":"MRWMR30589016500","price":429.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/MR_305_Matte_Black_Web_1_a7025878-283d-414b-a432-89d9df195da5.jpg?v=1795144574"},{"product_id":"method-mr305-nv-18x9-6x135-matte-black-wheel-mr30589016518","title":"Method MR305 NV 18x9 6x135 +18mm Offset 5.75in BS 94mm CB Matte Black Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor MR30589016518","description":"\u003cp\u003eThe Method MR305 NV is an 18x9 six-lug wheel in matte black, drilled 6x135 with a +18 mm offset and 5.75 in backspacing. Method publishes it as part number MR30589016518 and describes the 305 NV as a 12-window design with the Method logo debossed on either side of the center cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBeadlock-style lip.\u003c\/strong\u003e The lip undercut simulates a true beadlock wheel, and the lip bolts are replaceable, with optional bolt colors available from Method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHub-centric 6x135 fit.\u003c\/strong\u003e The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 94 mm, larger than Ford's 87.1 mm hub, so hub-centric rings (94 mm to 87.1 mm) are needed to center it on the truck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLoad rating.\u003c\/strong\u003e Method states a load rating of 2,500 to 3,640 lbs for the 305 NV line, with heavy-duty 4,500 lb applications also available; that figure is for the line, not specifically for this wheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWheel only.\u003c\/strong\u003e Lug nuts are not included, so plan on the correct M14x1.5 nuts for these trucks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize 18x9, bolt pattern 6x135\u003c\/li\u003e\n\u003cli\u003eOffset +18 mm, backspacing 5.75 in\u003c\/li\u003e\n\u003cli\u003eCenter bore 94 mm (hub rings needed for Ford's 87.1 mm hub)\u003c\/li\u003e\n\u003cli\u003eFinish: matte black\u003c\/li\u003e\n\u003cli\u003e12-window design, debossed Method logo beside the center cap\u003c\/li\u003e\n\u003cli\u003eLip undercut with replaceable lip bolts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Method publishes this wheel as 18x9, 6x135, +18mm offset, 5.75in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore (or larger). Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per wheelwiz.ca listing for this part number (94 mm), not on Method's site.\u003c\/p\u003e\u003cp\u003eThis wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.\u003c\/p\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Method Wheels","offers":[{"title":"Default Title","offer_id":67780330422571,"sku":"MRWMR30589016518","price":429.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/MR_305_Matte_Black_Web_1_6ddef686-1c4f-490c-ab05-80830407a20d.jpg?v=1795144591"},{"product_id":"method-mr305-nv-18x9-6x135-titanium-matte-black-lip-wheel-mr30589016818","title":"Method MR305 NV 18x9 6x135 +18mm Offset 5.75in BS 94mm CB Titanium - Matte Black Lip Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor MR30589016818","description":"\u003cp\u003eThe Method MR305 NV is an 18x9 six-lug wheel in titanium with a matte black lip, drilled 6x135 with a +18 mm offset and 5.75 in backspacing. Method publishes it as part number MR30589016818 and describes the 305 NV as a 12-window design with the Method logo debossed on either side of the center cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBeadlock-style lip.\u003c\/strong\u003e The lip undercut simulates a true beadlock wheel, and the lip bolts are replaceable, with optional bolt colors available from Method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHub-centric 6x135 fit.\u003c\/strong\u003e The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 94 mm, larger than Ford's 87.1 mm hub, so hub-centric rings (94 mm to 87.1 mm) are needed to center it on the truck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLoad rating.\u003c\/strong\u003e Method states a load rating of 2,500 to 3,640 lbs for the 305 NV line, with heavy-duty 4,500 lb applications also available; that figure is for the line, not specifically for this wheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWheel only.\u003c\/strong\u003e Lug nuts are not included, so plan on the correct M14x1.5 nuts for these trucks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize 18x9, bolt pattern 6x135\u003c\/li\u003e\n\u003cli\u003eOffset +18 mm, backspacing 5.75 in\u003c\/li\u003e\n\u003cli\u003eCenter bore 94 mm (hub rings needed for Ford's 87.1 mm hub)\u003c\/li\u003e\n\u003cli\u003eFinish: titanium with matte black lip\u003c\/li\u003e\n\u003cli\u003e12-window design, debossed Method logo beside the center cap\u003c\/li\u003e\n\u003cli\u003eLip undercut with replaceable lip bolts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Method publishes this wheel as 18x9, 6x135, +18mm offset, 5.75in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore (or larger). Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per wheelwiz.ca listing for this part number (94 mm), not on Method's site.\u003c\/p\u003e\u003cp\u003eThis wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.\u003c\/p\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Method Wheels","offers":[{"title":"Default Title","offer_id":67780330488107,"sku":"MRWMR30589016818","price":449.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/MR305_NV_wheel-6lug-titanium-17x8-5-1000_e2f99c70-d8a2-4c4e-a918-7c095744b101.jpg?v=1795144600"},{"product_id":"method-mr312-17x8-5-6x135-matte-black-wheel-mr31278516500","title":"Method MR312 17x8.5 6x135 0mm Offset 4.72in BS 87mm CB Matte Black Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor MR31278516500","description":"\u003cp\u003eThe Method MR312 is a 17x8.5 six-lug wheel in matte black, drilled 6x135 with a 0mm offset and 4.72in backspacing. Method publishes it as part number MR31278516500.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDesign.\u003c\/strong\u003e The Method MR312 is a standard wheel with a tough six-windowed point design and debossed METHOD logos. Its lip undercut simulates a true beadlock wheel and carries replaceable lip bolts, with optional colors available.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHub-centric 6x135 fit.\u003c\/strong\u003e The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 87 mm (nominal 87.1), so it centers on the Ford hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWheel only.\u003c\/strong\u003e Lug nuts are not included, so plan on the correct M14x1.5 nuts for these trucks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLoad rating.\u003c\/strong\u003e Method describes the MR312 line as having a 2,650 to 3,640 lb load rating. That figure is for the line; Method does not state a rating for this specific size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize 17x8.5, bolt pattern 6x135\u003c\/li\u003e\n\u003cli\u003eOffset 0mm, backspacing 4.72in\u003c\/li\u003e\n\u003cli\u003eCenter bore 87 mm (nominal 87.1)\u003c\/li\u003e\n\u003cli\u003eFinish: matte black\u003c\/li\u003e\n\u003cli\u003eSix-windowed point design with debossed METHOD logos\u003c\/li\u003e\n\u003cli\u003eLip undercut that simulates a true beadlock, with replaceable lip bolts (optional colors available)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Method publishes this wheel as 17x8.5, 6x135, 0mm offset, 4.72in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per wheelwiz.ca listing for this part number (87 mm), not on Method's site.\u003c\/p\u003e\u003cp\u003eThis wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.\u003c\/p\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Method Wheels","offers":[{"title":"Default Title","offer_id":67780335436075,"sku":"MRWMR31278516500","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/MR312_Matte_Black-1000.png?v=1795144694"},{"product_id":"method-mr315-17x8-5-6x135-machined-gloss-black-lip-wheel-mr315785161600","title":"Method MR315 17x8.5 6x135 0mm Offset 4.75in BS 87mm CB Machined - Gloss Black Lip Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor MR315785161600","description":"\u003cp\u003eThe Method MR315 is a 17x8.5 six-lug wheel in a machined finish with a gloss black lip, drilled 6x135 with a 0mm offset and 4.75in backspacing. Method publishes it as part number MR315785161600.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDesign.\u003c\/strong\u003e Method's page describes the MR315 Machined - Gloss Black Lip as pairing a contrasting gloss black lip and black hardware (also available in optional colors) with a screw-on center cap in brilliant chrome, and keeping the rugged 12-spoke design and beadlock-inspired styling, with machined pockets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHub-centric 6x135 fit.\u003c\/strong\u003e The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 87 mm (nominal 87.1), so it centers on the Ford hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWheel only.\u003c\/strong\u003e Lug nuts are not included, so plan on the correct M14x1.5 nuts for these trucks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize 17x8.5, bolt pattern 6x135\u003c\/li\u003e\n\u003cli\u003eOffset 0mm, backspacing 4.75in\u003c\/li\u003e\n\u003cli\u003eCenter bore 87 mm (nominal 87.1)\u003c\/li\u003e\n\u003cli\u003eFinish: Machined - Gloss Black Lip\u003c\/li\u003e\n\u003cli\u003eRugged 12-spoke design with beadlock-inspired styling and machined pockets (per Method)\u003c\/li\u003e\n\u003cli\u003eGloss black lip with black hardware, optional colors available (per Method)\u003c\/li\u003e\n\u003cli\u003eScrew-on chrome center cap (per Method)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Method publishes this wheel as 17x8.5, 6x135, 0mm offset, 4.75in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per wheelwiz.ca listing for this part number (87 mm), not on Method's site.\u003c\/p\u003e\u003cp\u003eThis wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.\u003c\/p\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Method Wheels","offers":[{"title":"Default Title","offer_id":67780336976171,"sku":"MRWMR315785161600","price":419.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/method-mr315-wheel-6lug-machined-gloss-black-lip-17x8-5-1000_90fd0be7-2054-45fc-b9a1-006904f78800.png?v=1795144776"},{"product_id":"method-mr315-17x8-5-6x135-polished-gloss-black-lip-wheel-mr315785161700","title":"Method MR315 17x8.5 6x135 0mm Offset 4.75in BS 87mm CB Polished - Gloss Black Lip Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor MR315785161700","description":"\u003cp\u003eThe Method MR315 is a 17x8.5 six-lug wheel in a polished finish with a gloss black lip, drilled 6x135 with a 0mm offset and 4.75in backspacing. Method publishes it as part number MR315785161700.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDesign.\u003c\/strong\u003e Method's page describes the MR315 Polished - Gloss Black Lip as featuring a fully polished wheel face paired with a contrasting gloss black lip and stainless steel hardware, with a screw-on center cap in brilliant chrome. It keeps the rugged 12-spoke design and beadlock-inspired styling, with machined pockets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHub-centric 6x135 fit.\u003c\/strong\u003e The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 87 mm (nominal 87.1), so it centers on the Ford hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWheel only.\u003c\/strong\u003e Lug nuts are not included, so plan on the correct M14x1.5 nuts for these trucks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize 17x8.5, bolt pattern 6x135\u003c\/li\u003e\n\u003cli\u003eOffset 0mm, backspacing 4.75in\u003c\/li\u003e\n\u003cli\u003eCenter bore 87 mm (nominal 87.1)\u003c\/li\u003e\n\u003cli\u003eFinish: Polished - Gloss Black Lip\u003c\/li\u003e\n\u003cli\u003eFully polished face with a gloss black lip (per Method)\u003c\/li\u003e\n\u003cli\u003eStainless steel hardware (per Method)\u003c\/li\u003e\n\u003cli\u003eScrew-on center cap in brilliant chrome (per Method)\u003c\/li\u003e\n\u003cli\u003eRugged 12-spoke design with beadlock-inspired styling and machined pockets (per Method)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Method publishes this wheel as 17x8.5, 6x135, 0mm offset, 4.75in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per wheelwiz.ca listing for this part number (87 mm), not on Method's site.\u003c\/p\u003e\u003cp\u003eThis wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.\u003c\/p\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Method Wheels","offers":[{"title":"Default Title","offer_id":67780337074475,"sku":"MRWMR315785161700","price":479.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/method-mr315-wheel-6lug-polished-gloss-black-lip-17x8-5-1000_8b79c289-4144-4df1-9f3d-38e739e8d42c.png?v=1795144787"},{"product_id":"method-mr315-17x8-5-6x135-machined-clear-coat-wheel-mr31578516300","title":"Method MR315 17x8.5 6x135 0mm Offset 4.75in BS 87mm CB Machined\/Clear Coat Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor MR31578516300","description":"\u003cp\u003eThe Method MR315 is a 17x8.5 six-lug wheel in a machined finish with a clear coat, drilled 6x135 with a 0mm offset and 4.75in backspacing. Method publishes it as part number MR31578516300.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDesign.\u003c\/strong\u003e The Method MR315 Machined with a clear coat has a rugged 12-spoke design and a debossed METHOD logo. Method calls it essentially the street legal version of its 103. The lip undercut simulates a true beadlock wheel, with extra pockets machined around the edge to save weight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHub-centric 6x135 fit.\u003c\/strong\u003e The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 87 mm (nominal 87.1), so it centers on the Ford hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWheel only.\u003c\/strong\u003e Lug nuts are not included, so plan on the correct M14x1.5 nuts for these trucks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLoad rating.\u003c\/strong\u003e Method describes the MR315 Machined line as having a 2,500 to 3,640 lb load rating. That figure is for the line; Method does not state a rating for this specific size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize 17x8.5, bolt pattern 6x135\u003c\/li\u003e\n\u003cli\u003eOffset 0mm, backspacing 4.75in\u003c\/li\u003e\n\u003cli\u003eCenter bore 87 mm (nominal 87.1)\u003c\/li\u003e\n\u003cli\u003eFinish: Machined\/Clear Coat\u003c\/li\u003e\n\u003cli\u003eRugged 12-spoke design with a debossed METHOD logo\u003c\/li\u003e\n\u003cli\u003eLip undercut that simulates a true beadlock\u003c\/li\u003e\n\u003cli\u003eExtra pockets machined around the edge for weight savings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Method publishes this wheel as 17x8.5, 6x135, 0mm offset, 4.75in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per wheelwiz.ca listing for this part number (87 mm), not on Method's site.\u003c\/p\u003e\u003cp\u003eThis wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.\u003c\/p\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Method Wheels","offers":[{"title":"Default Title","offer_id":67780337271083,"sku":"MRWMR31578516300","price":419.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/MR315_Machined_6_Lug_1000px.png?v=1795144795"},{"product_id":"method-mr316-17x8-5-6x135-matte-black-wheel-2017-2026-ford-f-150-raptor-bronco-raptor-mr31678516500","title":"Method MR316 17x8.5 6x135 0mm Offset 4.75in BS 87mm CB Matte Black Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor MR31678516500","description":"\u003cp\u003eThe Method MR316 is a 17x8.5 six-lug wheel in matte black, drilled 6x135 with a 0 mm offset and 4.75 in backspacing. Method publishes it as part number MR31678516500. Method describes the 316 as a 10-window wheel with a debossed Method logo on one of the spokes, priced as a value option in its range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHub-centric 6x135 fit.\u003c\/strong\u003e The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 87 mm (nominal 87.1), so it centers on the Ford hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWheel only.\u003c\/strong\u003e Lug nuts are not included, so plan on the correct M14x1.5 nuts for these trucks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLoad rating.\u003c\/strong\u003e Method gives a load rating of 2,650 to 3,640 lbs for the 316 line; that is a line-level figure, not a rating for this specific size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCenter cap.\u003c\/strong\u003e Method's page describes a flat snap-on center cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize 17x8.5, bolt pattern 6x135\u003c\/li\u003e\n\u003cli\u003eOffset 0 mm, backspacing 4.75 in\u003c\/li\u003e\n\u003cli\u003eCenter bore 87 mm (nominal 87.1)\u003c\/li\u003e\n\u003cli\u003eFinish: Matte Black\u003c\/li\u003e\n\u003cli\u003e10-window design with debossed Method logo\u003c\/li\u003e\n\u003cli\u003eMethod lists a load rating of 2,650 to 3,640 lbs for the 316 line; that is a line-level figure, not a rating for this specific size\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Method publishes this wheel as 17x8.5, 6x135, 0mm offset, 4.75in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per wheelwiz.ca listing for this part number (87 mm), not on Method's site.\u003c\/p\u003e\u003cp\u003eThis wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.\u003c\/p\u003e\u003cp\u003eFactory wheels on these trucks are about +34 mm.\u003c\/p\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Method Wheels","offers":[{"title":"Default Title","offer_id":67780342350123,"sku":"MRWMR31678516500","price":379.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/method-mr316-wheel-6lug-matte-black-17x8-5-1000_3a1f5272-6dc5-45b2-8906-a60006bad631.jpg?v=1795145198"},{"product_id":"method-mr316-18x9-6x135-matte-black-wheel-mr31689016518","title":"Method MR316 18x9 6x135 +18mm Offset 5.75in BS 87mm CB Matte Black Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor MR31689016518","description":"\u003cp\u003eThe Method MR316 wheel in 18x9 is a six-lug wheel in matte black, drilled 6x135 with a +18mm offset and 5.75in backspacing. Method publishes it as part number MR31689016518 in its Standard wheel line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTen-window design.\u003c\/strong\u003e Method describes the MR316 as a 10 window wheel with a flat snap-on center cap and a debossed METHOD logo on one of the spokes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHub-centric 6x135 fit.\u003c\/strong\u003e The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 87 mm (nominal 87.1), so it centers on the Ford hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLoad rating.\u003c\/strong\u003e Method's MR316 page states a load rating of 2,650 to 3,640 lbs. for the line (not per size), so confirm the rating for your size with Method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWheel only.\u003c\/strong\u003e Lug nuts are sold separately; the F-150 Raptor (2017 and up), Raptor R and Bronco Raptor use M14x1.5.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize 18x9, bolt pattern 6x135\u003c\/li\u003e\n\u003cli\u003eOffset +18mm, backspacing 5.75in\u003c\/li\u003e\n\u003cli\u003eCenter bore 87 mm (nominal 87.1)\u003c\/li\u003e\n\u003cli\u003eFinish: matte black\u003c\/li\u003e\n\u003cli\u003e10 window design\u003c\/li\u003e\n\u003cli\u003eFlat snap-on center cap (as described by Method)\u003c\/li\u003e\n\u003cli\u003eDebossed METHOD logo on one spoke\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Method publishes this wheel as 18x9, 6x135, +18mm offset, 5.75in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore listed as 87 mm (nominal 87.1) per the wheelwiz.ca listing for this part number, not on Method's site.\u003c\/p\u003e\u003cp\u003eThis wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.\u003c\/p\u003e\u003cp\u003eFactory offset on these trucks is about +34 mm.\u003c\/p\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Method Wheels","offers":[{"title":"Default Title","offer_id":67780343038251,"sku":"MRWMR31689016518","price":409.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/method-mr316-wheel-6lug-matte-black-17x8-5-1000.jpg?v=1795145046"},{"product_id":"method-mr316-18x9-6x135-gloss-titanium-wheel-mr31689016818","title":"Method MR316 18x9 6x135 +18mm Offset 5.75in BS 87mm CB Gloss Titanium Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor MR31689016818","description":"\u003cp\u003eThe Method MR316 wheel in 18x9 is a six-lug wheel in gloss titanium, drilled 6x135 with a +18mm offset and 5.75in backspacing. Method publishes it as part number MR31689016818 in its Standard wheel line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTen-window design.\u003c\/strong\u003e Method describes the MR316 as a 10 window wheel with a flat snap-on center cap and a debossed METHOD logo on one of the spokes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHub-centric 6x135 fit.\u003c\/strong\u003e The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 87 mm (nominal 87.1), so it centers on the Ford hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLoad rating.\u003c\/strong\u003e Method's MR316 page states a 2,650 lb. load rating for this finish's line (not per size), so confirm the rating for your size with Method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWheel only.\u003c\/strong\u003e Lug nuts are sold separately; the F-150 Raptor (2017 and up), Raptor R and Bronco Raptor use M14x1.5.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize 18x9, bolt pattern 6x135\u003c\/li\u003e\n\u003cli\u003eOffset +18mm, backspacing 5.75in\u003c\/li\u003e\n\u003cli\u003eCenter bore 87 mm (nominal 87.1)\u003c\/li\u003e\n\u003cli\u003eFinish: gloss titanium\u003c\/li\u003e\n\u003cli\u003e10 window design\u003c\/li\u003e\n\u003cli\u003eFlat snap-on center cap (as described by Method)\u003c\/li\u003e\n\u003cli\u003eDebossed METHOD logo on one spoke\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Method publishes this wheel as 18x9, 6x135, +18mm offset, 5.75in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore listed as 87 mm (nominal 87.1) per the wheelwiz.ca listing for this part number, not on Method's site.\u003c\/p\u003e\u003cp\u003eThis wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.\u003c\/p\u003e\u003cp\u003eFactory offset on these trucks is about +34 mm.\u003c\/p\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Method Wheels","offers":[{"title":"Default Title","offer_id":67780343365931,"sku":"MRWMR31689016818","price":409.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/method-mr316-wheel-6lug-gloss-titanium-17x8-5-1000_94482b26-e1c0-488c-abb9-404fc4d6b990.jpg?v=1795145071"},{"product_id":"method-mr321-17x8-5-6x135-machined-clear-coat-wheel-mr32178516300","title":"Method MR321 17x8.5 6x135 0mm Offset 4.72in BS 87mm CB Machined\/Clear Coat Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor MR32178516300","description":"\u003cp\u003eThe Method MR321 is a 17x8.5 six-lug wheel in a machined finish with clear coat, drilled 6x135 with a 0 mm offset and 4.72 in backspacing. Method publishes it as part number MR32178516300. Method describes the MR321 as a window and spoke design built to stand out, offered in gloss black and machined finishes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDesign.\u003c\/strong\u003e The MR321 is a standard-series wheel with a unique window and spoke layout, aimed at off-road owners who want distinctive styling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHub-centric 6x135 fit.\u003c\/strong\u003e The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 87 mm (nominal 87.1), so it centers on the Ford hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWheel only.\u003c\/strong\u003e Lug nuts are not included, so plan on the correct M14x1.5 nuts for these trucks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize 17x8.5, bolt pattern 6x135\u003c\/li\u003e\n\u003cli\u003eOffset 0 mm, backspacing 4.72 in\u003c\/li\u003e\n\u003cli\u003eCenter bore 87 mm (nominal 87.1)\u003c\/li\u003e\n\u003cli\u003eFinish: machined with clear coat\u003c\/li\u003e\n\u003cli\u003eWindow and spoke design\u003c\/li\u003e\n\u003cli\u003eMethod TOPO center cap (Method's page says it is included)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Method publishes this wheel as 17x8.5, 6x135, 0mm offset, 4.72in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per wheelwiz.ca listing for this part number (87 mm), not on Method's site.\u003c\/p\u003e\u003cp\u003eThis wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.\u003c\/p\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Method Wheels","offers":[{"title":"Default Title","offer_id":67780345397547,"sku":"MRWMR32178516300","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/method-mr321-wheel-6lug-machined-clear-coat-17x8-5-1000.png?v=1795145279"},{"product_id":"method-mr323-17x8-5-6x135-gloss-method-bronze-wheel-mr323785161500","title":"Method MR323 17x8.5 6x135 0mm Offset 4.72in BS 87mm CB Gloss Method Bronze Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor MR323785161500","description":"\u003cp\u003eThe Method MR323 is a 17x8.5 six-lug wheel in Gloss Method Bronze, drilled 6x135 with a 0 mm offset and 4.72 in backspacing. Method publishes it as part number MR323785161500. Method describes the MR323 as a refresh of its 12-window design, a classic Method look, offered in gloss black and gloss Method bronze.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDesign.\u003c\/strong\u003e The MR323 is a standard-series wheel that updates the iconic 12-window design with a fresh face.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHub-centric 6x135 fit.\u003c\/strong\u003e The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 87 mm (nominal 87.1), so it centers on the Ford hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWheel only.\u003c\/strong\u003e Lug nuts are not included, so plan on the correct M14x1.5 nuts for these trucks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize 17x8.5, bolt pattern 6x135\u003c\/li\u003e\n\u003cli\u003eOffset 0 mm, backspacing 4.72 in\u003c\/li\u003e\n\u003cli\u003eCenter bore 87 mm (nominal 87.1)\u003c\/li\u003e\n\u003cli\u003eFinish: Gloss Method Bronze\u003c\/li\u003e\n\u003cli\u003eRefreshed 12-window design\u003c\/li\u003e\n\u003cli\u003eMethod TOPO center cap (Method's page says it is included)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Method publishes this wheel as 17x8.5, 6x135, 0mm offset, 4.72in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per wheelwiz.ca listing for this part number (87 mm), not on Method's site.\u003c\/p\u003e\u003cp\u003eThis wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.\u003c\/p\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Method Wheels","offers":[{"title":"Default Title","offer_id":67780345692459,"sku":"MRWMR323785161500","price":379.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/MR323-6lug-gloss-bronze-17x8-5-1000.png?v=1795145323"},{"product_id":"method-mr605-nv-20x10-6x135-matte-black-wheel-mr60521016524n","title":"Method MR605 NV 20x10 6x135 -24mm Offset 4.55in BS 87mm CB Matte Black Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor MR60521016524N","description":"\u003cp\u003eThe Method MR605 NV is a 20x10 six-lug wheel in matte black, drilled 6x135 with a -24 mm offset and 4.55 in backspacing. Method publishes it as part number MR60521016524N. Method describes the MR605 NV as a 12-window wheel with debossed Method logos.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDesign.\u003c\/strong\u003e The MR605 NV is a standard-series wheel. Its lip undercut imitates a true beadlock wheel, and the lip bolts are replaceable, with optional colors available from Method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHub-centric 6x135 fit.\u003c\/strong\u003e The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 87 mm (nominal 87.1), so it centers on the Ford hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWheel only.\u003c\/strong\u003e Lug nuts are not included, so plan on the correct M14x1.5 nuts for these trucks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize 20x10, bolt pattern 6x135\u003c\/li\u003e\n\u003cli\u003eOffset -24 mm, backspacing 4.55 in\u003c\/li\u003e\n\u003cli\u003eCenter bore 87 mm (nominal 87.1)\u003c\/li\u003e\n\u003cli\u003eFinish: matte black\u003c\/li\u003e\n\u003cli\u003e12-window design with debossed Method logos\u003c\/li\u003e\n\u003cli\u003eLip undercut that imitates a beadlock, with replaceable lip bolts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Method publishes this wheel as 20x10, 6x135, -24mm offset, 4.55in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per wheelwiz.ca listing for this part number (87 mm), not on Method's site.\u003c\/p\u003e\u003cp\u003eThis wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.\u003c\/p\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Method Wheels","offers":[{"title":"Default Title","offer_id":67780348313899,"sku":"MRWMR60521016524N","price":479.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/Method_mr605_wheel_6lug_matte_black_20x12-1000.png?v=1795145395"},{"product_id":"method-mr703-17x8-5-6x135-matte-black-wheel-mr70378516500","title":"Method MR703 Bead Grip 17x8.5 6x135 0mm Offset 4.8in BS 87mm CB Matte Black Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor MR70378516500","description":"\u003cp\u003eThe Method MR703 is a 17x8.5 six-lug wheel in matte black, drilled 6x135 with a 0 mm offset and 4.8 in backspacing. Method publishes it as part number MR70378516500 in its Bead Grip line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBead Grip technology.\u003c\/strong\u003e Method developed the MR703 for off-road enthusiasts and overland trips. Its Bead Grip technology lets you run tire pressures that would normally call for a beadlock wheel without the tire coming off the bead. Method says lower pressure gives a bigger contact patch for traction on loose surfaces and a softer ride.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e12-window design.\u003c\/strong\u003e Method describes the look as a 12 window design with dual debossed METHOD logos.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHub-centric 6x135 fit.\u003c\/strong\u003e The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 87 mm (nominal 87.1), so it centers on the Ford hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWheel only.\u003c\/strong\u003e Lug nuts are not included, so plan on the correct M14x1.5 nuts for these trucks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize 17x8.5, bolt pattern 6x135\u003c\/li\u003e\n\u003cli\u003eOffset 0 mm, backspacing 4.8 in\u003c\/li\u003e\n\u003cli\u003eCenter bore 87 mm (nominal 87.1)\u003c\/li\u003e\n\u003cli\u003eFinish: matte black\u003c\/li\u003e\n\u003cli\u003eBead Grip technology for low-pressure off-road driving\u003c\/li\u003e\n\u003cli\u003e12 window design with dual debossed METHOD logos\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Method publishes this wheel as 17x8.5, 6x135, 0mm offset, 4.8in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per wheelwiz.ca listing for this part number (87 mm), not on Method's site.\u003c\/p\u003e\u003cp\u003eThis wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders.\u003c\/p\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Method Wheels","offers":[{"title":"Default Title","offer_id":67780354212139,"sku":"MRWMR70378516500","price":409.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/method-mr703-wheel-6lug-matte-black-17x8-5-1000_499b40ca-2da7-41d5-884b-8e1b5fc9af6e.jpg?v=1795145400"},{"product_id":"method-mr703-bead-grip-17x8-5-6x135-matte-black-wheel-mr70378516525","title":"Method MR703 Bead Grip 17x8.5 6x135 +25mm Offset 5.78in BS 87mm CB Matte Black Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor MR70378516525","description":"\u003cp\u003eThe Method MR703 Bead Grip is a 17x8.5 six-lug wheel in matte black, drilled 6x135 with a +25mm offset and 5.78 in backspacing. Method publishes it as part number MR70378516525 in its MR703 Bead Grip line, which it describes as developed for off-road enthusiasts and overland trips.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDesign.\u003c\/strong\u003e Method describes the MR703 as a 12-window wheel with dual debossed METHOD logos.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBead Grip Technology.\u003c\/strong\u003e Method says Bead Grip lets you run tire pressures that used to call for beadlock wheels without the tire coming off the bead. Lower pressure off-road spreads the contact patch for better grip on loose surfaces and softens the ride.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e6x135 fit.\u003c\/strong\u003e The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 87 mm (nominal 87.1), so it centers on the Ford hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWheel only.\u003c\/strong\u003e Lug nuts are not included, so plan on the correct M14x1.5 nuts for these trucks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize 17x8.5, bolt pattern 6x135\u003c\/li\u003e\n\u003cli\u003eOffset +25mm, backspacing 5.78 in\u003c\/li\u003e\n\u003cli\u003eCenter bore 87 mm (nominal 87.1)\u003c\/li\u003e\n\u003cli\u003eFinish: matte black\u003c\/li\u003e\n\u003cli\u003eBead Grip Technology\u003c\/li\u003e\n\u003cli\u003e12-window design with dual debossed METHOD logos\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Method publishes this wheel as 17x8.5, 6x135, +25mm offset, 5.78 in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per wheelwiz.ca listing for this part number (87 mm), not on Method's site.\u003c\/p\u003e\u003cp\u003eThis wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory wheel offset on these trucks is about +34 mm.\u003c\/p\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Method Wheels","offers":[{"title":"Default Title","offer_id":67780354277675,"sku":"MRWMR70378516525","price":409.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/method-mr703-wheel-6lug-matte-black-17x8-5-1000_80e6c961-3ba9-44a8-870b-0ec885687567.jpg?v=1795145515"},{"product_id":"method-mr703-bead-grip-17x8-5-6x135-method-bronze-wheel-mr70378516900","title":"Method MR703 Bead Grip 17x8.5 6x135 0mm Offset 4.8in BS 87mm CB Method Bronze Wheel for 2017-2026 Ford F-150 Raptor, 2023-2026 F-150 Raptor R, 2022-2026 Bronco Raptor MR70378516900","description":"\u003cp\u003eThe Method MR703 Bead Grip is a 17x8.5 six-lug wheel finished in Method Bronze, drilled 6x135 with a 0mm offset and 4.8 in backspacing. Method publishes it as part number MR70378516900 in its MR703 Bead Grip line, which it describes as developed for off-road enthusiasts and overland trips.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDesign.\u003c\/strong\u003e Method describes the MR703 as a 12-window wheel with dual debossed METHOD logos.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBead Grip Technology.\u003c\/strong\u003e Method says Bead Grip lets you run tire pressures that used to call for beadlock wheels without the tire coming off the bead. Lower pressure off-road spreads the contact patch for better grip on loose surfaces and softens the ride.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e6x135 fit.\u003c\/strong\u003e The 6x135 pattern is the one Ford uses on the F-150 Raptor, F-150 Raptor R and Bronco Raptor. The bore is listed as 87 mm (nominal 87.1), so it centers on the Ford hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWheel only.\u003c\/strong\u003e Lug nuts are not included, so plan on the correct M14x1.5 nuts for these trucks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize 17x8.5, bolt pattern 6x135\u003c\/li\u003e\n\u003cli\u003eOffset 0mm, backspacing 4.8 in\u003c\/li\u003e\n\u003cli\u003eCenter bore 87 mm (nominal 87.1)\u003c\/li\u003e\n\u003cli\u003eFinish: Method Bronze\u003c\/li\u003e\n\u003cli\u003eBead Grip Technology\u003c\/li\u003e\n\u003cli\u003e12-window design with dual debossed METHOD logos\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Method publishes this wheel as 17x8.5, 6x135, 0mm offset, 4.8 in backspacing and does not list vehicles; it is listed for the Ford Raptor models that use a 6x135 bolt pattern and an 87.1 mm center bore. Fitment is decided by bolt pattern and center bore against Ford's Raptor hub specs; bore per wheelwiz.ca listing for this part number (87 mm), not on Method's site.\u003c\/p\u003e\u003cp\u003eThis wheel has a lower offset than the factory wheel, so it sits further out and may poke past the fenders. The factory wheel offset on these trucks is about +34 mm.\u003c\/p\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Method Wheels","offers":[{"title":"Default Title","offer_id":67780354375979,"sku":"MRWMR70378516900","price":409.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/method-mr703-wheel-6lug-bronze-17x8-5-1000.jpg?v=1795145540"}],"url":"https:\/\/raptorsonly.com\/collections\/f-150-raptor-2nd-gen-wheels-tires-wheels.oembed","provider":"RaptorsOnly.com","version":"1.0","type":"link"}