{"title":"Bumpers, Grilles \u0026 Guards","description":null,"products":[{"product_id":"dv8-offroad-factory-modular-front-bumper-bull-bar-2022-2026-ford-bronco-raptor-lbbr-04","title":"DV8 Offroad Factory Modular Front Bumper Bull Bar for 2022-2026 Ford Bronco Raptor LBBR-04","description":"\u003cp\u003eThis low-profile bull bar bolts to the factory heavy-duty modular steel front bumper on the Ford Bronco Raptor and adds a layer of grille protection without covering the BRONCO lettering. It sits much lower in front of the grille than the Ford version, which gives the front end a cleaner, more aggressive stance, and it has an inset mounting point for a light bar.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProtection where it counts.\u003c\/strong\u003e The bar guards the grille area against branches, brush and other light obstacles you meet on the trail. It is made from 3.5mm steel with a micro-texture black powder coat finish, and weighs about 10 lbs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRoom for a light bar.\u003c\/strong\u003e The center section takes a single-row 13-inch LED light bar, such as DV8's own Elite Series bar, mounted inside the bull bar so the lighting stays streamlined. Minor wiring is required for the light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBolt-on installation.\u003c\/strong\u003e The bull bar mounts to the existing accessory locations on the modular steel bumper with factory hardware, so no drilling is required. DV8 notes that the front camera view is partly blocked by the bumper and the bull bar.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits the factory heavy-duty modular steel front bumper only; it does not fit the plastic or Capable steel bumper\u003c\/li\u003e\n\u003cli\u003eMounts at the OEM accessory locations with factory hardware\u003c\/li\u003e\n\u003cli\u003eTakes a 13-inch single-row LED light bar\u003c\/li\u003e\n\u003cli\u003eGrille protection against light obstacles\u003c\/li\u003e\n\u003cli\u003e3.5mm steel, micro-texture black powder coat\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProp 65.\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA), which are known to the State of California to cause cancer and birth defects or other reproductive harm. More information: www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e DV8 Offroad lists this bull bar for the 2021-2026 Ford Bronco with the Heavy Duty Modular Front Bumper only, and states that it also fits Raptors. The Bronco Raptor is a 2022-2026 model, so the Raptor fit runs 2022-2026. Fitment confirmed against DV8 Offroad's published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/be7d3a5d267f064fb6b7882222cbdd86.PDF\" target=\"_blank\" rel=\"noopener\"\u003eCatalog\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor (with the Heavy Duty Modular Front Bumper only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eHeavy Duty Modular Front Bumper only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":67766476734763,"sku":"DVELBBR-04","price":206.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/6th-gen-ford-bronco-factory-modular-bumper-bull-bar.jpg?v=1794597557"},{"product_id":"dv8-offroad-capable-bull-bar-2022-2026-ford-bronco-raptor-lbbr-09","title":"DV8 Offroad Capable Bull Bar for 2022-2026 Ford Bronco Raptor LBBR-09","description":"\u003cp\u003eThe DV8 Offroad Capable Bull Bar gives a 6th-generation Ford Bronco a lighting platform and a layer of grille protection without replacing the bumper. It is built for the factory Capable Front Bumper and follows that bumper's lines, so the front end keeps its factory look while gaining room for auxiliary lights.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFlexible lighting layouts.\u003c\/strong\u003e One 13 to 20-inch single or dual row light bar can ride on top of the bull bar or hang below it, and 3-inch pod lights can run above the bar. Adjustable, removable light tabs let you change the arrangement later without touching the bar itself. DV8 notes that its Elite Light Bar Rail Mounts are needed to attach a light bar; they are sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProtection ahead of the grille.\u003c\/strong\u003e The bar sits in front of the grille and helps shield it from shrubs, branches and other light debris on the trail.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSteel construction.\u003c\/strong\u003e The bull bar is made from 3mm and 3.5mm steel and finished in a micro-texture black powder coat that matches the look of the Capable bumper.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation notes.\u003c\/strong\u003e Drilling is required, and DV8 estimates roughly two hours for the job. With the bar installed it will be visible to the front camera, if your Bronco has one, and DV8 describes the obstruction as minor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesigned for the factory Capable Front Bumper\u003c\/li\u003e\n\u003cli\u003eHolds one 13 to 20-inch single or dual row light bar\u003c\/li\u003e\n\u003cli\u003eAccepts 3-inch pod lights above the bar\u003c\/li\u003e\n\u003cli\u003eAdjustable and removable light tabs\u003c\/li\u003e\n\u003cli\u003e3mm and 3.5mm steel construction\u003c\/li\u003e\n\u003cli\u003eMicro-texture black powder coat finish\u003c\/li\u003e\n\u003cli\u003eDrilling required for installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProp 65.\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003eFitment: Fits the 2022-2026 Ford Bronco Raptor and the Ford Bronco 2021-2026. DV8 Offroad's published application list covers the 2021-2026 Ford Bronco and does not exclude the Raptor. This bull bar fits the factory Capable Front Bumper only; it will not fit the plastic or the modular front bumper. Fitment confirmed against DV8 Offroad's published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/LBBR-09_Install_Guide_V3_Final.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eAll trims (factory Capable Front Bumper only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor (factory Capable Front Bumper only; drilling required)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":67766480109867,"sku":"DVELBBR-09","price":206.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/LBBR-09_Offtruck-3.jpg?v=1794600663"},{"product_id":"dv8-offroad-mto-series-rear-bumper-2022-2026-ford-bronco-raptor-rbbr-01","title":"DV8 Offroad MTO Series Rear Bumper for 2022-2026 Ford Bronco Raptor RBBR-01","description":"\u003cp\u003eThe DV8 Offroad MTO Series (Made to Overland) rear bumper replaces the factory rear bumper on the sixth-generation Ford Bronco with a heavy steel unit built for trail use. It keeps the ground clearance and departure angle that make the Bronco capable, adds recovery points and light mounts, and still lets the factory tailgate and spare tire carrier work as designed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt from thick steel.\u003c\/strong\u003e The body is 4mm steel with 5mm mounts and supports, finished in a two-stage micro-texture black powder coat that resists chips and trail rash. Paintable aluminum mesh panels in the end caps give it a clean, finished look.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRecovery and lighting ready.\u003c\/strong\u003e Two reinforced clevis mounts accept 3\/4-inch D-ring shackles for recovery. Two mounts take 3-inch flush-mount pod lights, which can be wired to the reverse lights or to a separate harness for extra light behind the truck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTire, sensor and hitch friendly.\u003c\/strong\u003e The license plate mount sits at the side of the bumper so the tailgate swings freely and larger tires clear it. Sensor holes keep the factory backup sensors working, the bumper accommodates a spare up to 37 inches on the factory carrier, and the factory tow hitch remains usable. With a 37-inch spare, DV8 suggests its third brake light extension to keep that light visible.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e4mm steel body with 5mm mounts and supports\u003c\/li\u003e\n\u003cli\u003eTwo mounts for 3-inch flush-mount pod lights\u003c\/li\u003e\n\u003cli\u003eReinforced D-ring mounts\u003c\/li\u003e\n\u003cli\u003eTwo-stage micro-texture black powder coat\u003c\/li\u003e\n\u003cli\u003eRetains factory backup sensors\u003c\/li\u003e\n\u003cli\u003ePaintable aluminum mesh panels\u003c\/li\u003e\n\u003cli\u003eFits a spare up to 37 inches on the OEM carrier\u003c\/li\u003e\n\u003cli\u003eCompatible with the factory tow hitch\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications.\u003c\/strong\u003e Direct-fit steel and aluminum construction, about 79 lb. Installation takes roughly 2.5 hours, and two people are needed to lift the bumper into place. The D-ring mounts are for recovery only, not flat towing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65.\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Fits the 2022-2026 Ford Bronco Raptor, along with the Base, Big Bend, Black Diamond, Outer Banks, Badlands, Wildtrak and First Edition trims (2021-2026). On the Raptor, the rear mud flaps must be removed, and the included license plate bracket does not fit; the DV8 license plate bracket LPBR-03 is required. Models with blind spot detection also need LPBR-03 to keep that feature. Fitment confirmed against DV8 Offroad's published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/RBBR-01_InstallManual.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Manual\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/a7f95f32874207cf36dad6cd8102962d.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (supplier copy)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/49fc3eef2773ab8c8f0dadcbaaaac56e.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (supplier copy 2)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/be7d3a5d267f064fb6b7882222cbdd86.PDF\" target=\"_blank\" rel=\"noopener\"\u003eCatalog\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor (remove rear mud flaps; use license plate bracket LPBR-03)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eBig Bend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eBlack Diamond\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eOuter Banks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eBadlands\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eWildtrak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eFirst Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":67766500098347,"sku":"DVERBBR-01","price":849.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/bronco-rear-bumper-1.jpg?v=1794597987"},{"product_id":"dv8-offroad-spec-series-rear-bumper-2022-2026-ford-bronco-raptor-rbbr-05","title":"DV8 Offroad Spec Series Rear Bumper for 2022-2026 Ford Bronco Raptor RBBR-05","description":"\u003cp\u003eThe DV8 Offroad Spec Series rear bumper is a bolt-on steel replacement for the factory rear bumper on the sixth-generation Ford Bronco, including the Bronco Raptor. It adds protection and recovery points while following the lines of the truck, so it looks like it belongs there.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTough, clean construction.\u003c\/strong\u003e The bumper is built from 3.5mm and 5mm steel plate with a micro-texture black powder coat. Satin black aluminum accent panels and an aluminum-backed logo give it a finished, modern look.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReady for lights and recovery.\u003c\/strong\u003e Two 1-inch thick D-ring mounts accept 7\/8-inch pins for recovery, and the bumper mounts two 3-inch pod lights. Welded-in zip tie tabs help you route and hide wiring for aftermarket lights.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEasy install.\u003c\/strong\u003e The design is fully bolt-on, with no cutting or drilling, and all mounting hardware is included. DV8 estimates about three hours. The factory sensors keep working, the factory hitch stays usable, and a spare up to 37 inches fits on the OEM tire carrier. To keep the third brake light visible with a 37-inch spare, DV8 offers a third brake light extension bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3.5mm and 5mm steel plate\u003c\/li\u003e\n\u003cli\u003eMicro-texture black powder coat\u003c\/li\u003e\n\u003cli\u003eSatin black aluminum accent panels and aluminum-backed logo\u003c\/li\u003e\n\u003cli\u003eMounts for two 3-inch pod lights\u003c\/li\u003e\n\u003cli\u003eTwo 1-inch thick D-ring mounts for 7\/8-inch pins\u003c\/li\u003e\n\u003cli\u003eWelded-in zip tie tabs for wire management\u003c\/li\u003e\n\u003cli\u003eCompatible with the factory hitch and factory sensors\u003c\/li\u003e\n\u003cli\u003eFits a spare up to 37 inches on the OEM carrier\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications.\u003c\/strong\u003e Bolt-on direct fit. The D-ring mounts are for recovery only, not flat towing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65.\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Fits all trim levels of the 2021-2026 Ford Bronco, including the Bronco Raptor (2022-2026). Fitment confirmed against DV8 Offroad's published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/RBBR-05_Install_Guide__Final.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eAll trims (including Raptor)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":67766500426027,"sku":"DVERBBR-05","price":849.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/2021-2024-Bronco-Spec-Series-Rear-Bumper-Offtruck-02.jpg?v=1794598006"},{"product_id":"ford-racing-2021-f-150-black-painted-grille","title":"Ford Racing 2021 F-150 Black Painted Grille","description":"\u003cp\u003eTransform your F-150 with this Black Painted Grille and gain a more sporty, menacing appearance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSimple upgrade and install\u003c\/li\u003e\n\u003cli\u003eFord Oval sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2023\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eKing Ranch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018-2023\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eLariat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2023\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2023\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003ePlatinum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2023\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003ePolice Responder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2023\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2023\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eSSV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2023\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eTremor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018-2023\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eXL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018-2023\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eXLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Ford Racing","offers":[{"title":"Default Title","offer_id":67767974625579,"sku":"FRPM-8200-F15A","price":360.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/d3bfb2492b0ba9fce8da8f1327982878L.jpg?v=1792047713"},{"product_id":"go-rhino-rc2-frame-3in-bottom-mount-black","title":"Go Rhino RC2 Frame - 3in - Bottom Mount - Black","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe Go Rhino RC2 Bull Bar provides front-end protection for trucks and SUVs. The 3\" diameter tubular steel frame features a galvanized steel skid plate with a stylish hexagonal cut out pattern. The RC2 is the ideal platform for auxiliary lights due to pre-drilled light mount holes across the center crossmember. Installation is easy with no drilling required. Mounting brackets NOT included. RC2 Bull Bars come with a Limited Lifetime warranty on materials and construction and a 5 year warranty on the Textured Black Finish.\u003c\/p\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/8c4d57eae3648a266bfbd9ee9afde46b.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eLimited Lifetime warranty on materials and construction and a 5 year warranty on the Textured Black Finish.\u003c\/li\u003e\n\u003cli\u003eRC2 with 3\" diameter tubular steel for trucks and SUV's.\u003c\/li\u003e\n\u003cli\u003eBull bar frame only, mounting brackets not included\u003c\/li\u003e\n\u003cli\u003eStainless steel skid plate is included\u003c\/li\u003e\n\u003cli\u003eEasy bolt-on, no-drill installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eColorado\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eColorado\u003c\/td\u003e\n\u003ctd\u003eLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eColorado\u003c\/td\u003e\n\u003ctd\u003eWT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eColorado\u003c\/td\u003e\n\u003ctd\u003eZ71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004-2005\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004-2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eHybrid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004-2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004-2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004-2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eSS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004-2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eWT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004-2005\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eZ71 Off-Road\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2003-2004\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 2500\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2003-2004\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 2500\u003c\/td\u003e\n\u003ctd\u003eLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2003-2004\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 2500\u003c\/td\u003e\n\u003ctd\u003eLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 2500\u003c\/td\u003e\n\u003ctd\u003eWT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2003-2005\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 2500 HD\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2003-2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 2500 HD\u003c\/td\u003e\n\u003ctd\u003eLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2003-2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 2500 HD\u003c\/td\u003e\n\u003ctd\u003eLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2003-2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 2500 HD\u003c\/td\u003e\n\u003ctd\u003eWT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2003-2005\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 3500\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2003-2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 3500\u003c\/td\u003e\n\u003ctd\u003eLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2003-2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 3500\u003c\/td\u003e\n\u003ctd\u003eLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004,2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 3500\u003c\/td\u003e\n\u003ctd\u003eWT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006-2010\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 1500\u003c\/td\u003e\n\u003ctd\u003eLaramie\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006-2010\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 1500\u003c\/td\u003e\n\u003ctd\u003eSLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006-2007,2009-2010\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 1500\u003c\/td\u003e\n\u003ctd\u003eSport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 1500\u003c\/td\u003e\n\u003ctd\u003eSRT-10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006-2010\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 1500\u003c\/td\u003e\n\u003ctd\u003eST\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 1500\u003c\/td\u003e\n\u003ctd\u003eSXT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009-2010\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 1500\u003c\/td\u003e\n\u003ctd\u003eTRX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006-2007,2009-2010\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 1500\u003c\/td\u003e\n\u003ctd\u003eTRX4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006-2009\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 2500\u003c\/td\u003e\n\u003ctd\u003eLaramie\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006-2009\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 2500\u003c\/td\u003e\n\u003ctd\u003ePower Wagon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006-2009\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 2500\u003c\/td\u003e\n\u003ctd\u003eSLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006-2007\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 2500\u003c\/td\u003e\n\u003ctd\u003eSport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006-2009\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 2500\u003c\/td\u003e\n\u003ctd\u003eST\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 2500\u003c\/td\u003e\n\u003ctd\u003eSXT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006-2007\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 2500\u003c\/td\u003e\n\u003ctd\u003eTRX4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006-2009\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 3500\u003c\/td\u003e\n\u003ctd\u003eLaramie\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006-2009\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 3500\u003c\/td\u003e\n\u003ctd\u003eSLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006-2007\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 3500\u003c\/td\u003e\n\u003ctd\u003eSport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006-2009\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 3500\u003c\/td\u003e\n\u003ctd\u003eST\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 3500\u003c\/td\u003e\n\u003ctd\u003eSXT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 3500\u003c\/td\u003e\n\u003ctd\u003eTRX4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1997-2000\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007-2008,2010-2014\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eFX2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004-2014\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eFX4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2000-2003,2006-2008,2010-2012\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eHarley-Davidson Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2001-2003,2005-2025\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eKing Ranch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1997-2025\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eLariat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eLariat Limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2003\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eLightning\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008,2013-2014,2016-2023\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009-2025\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003ePlatinum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003ePolice Responder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2025\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eSSV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004-2014,2024-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eSTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2014\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eSVT Raptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eTHE 60TH ANNIVERSARY EDITION\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2025\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eTremor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1997-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eXL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1997-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eXLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eCanyon\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eCanyon\u003c\/td\u003e\n\u003ctd\u003eSL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eCanyon\u003c\/td\u003e\n\u003ctd\u003eSLE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eCanyon\u003c\/td\u003e\n\u003ctd\u003eSLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2018\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eBig Horn\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012-2018\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eExpress\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013-2018\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eHFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2018\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eLaramie\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2015\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eLaramie Limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2018\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eLaramie Longhorn\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2018\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2018\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eLone Star\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2016\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eOutdoorsman\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eR\/T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2018\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eRebel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2018\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eSLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2018\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eSpecial Service\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2018\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eSport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2012\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eST\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2018\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eTradesman\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eTradesman HD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019-2022\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500 Classic\u003c\/td\u003e\n\u003ctd\u003eSLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019-2024\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500 Classic\u003c\/td\u003e\n\u003ctd\u003eTradesman\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2022\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eSequoia\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2022\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eSequoia\u003c\/td\u003e\n\u003ctd\u003eNightshade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2022\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eSequoia\u003c\/td\u003e\n\u003ctd\u003ePlatinum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2022\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eSequoia\u003c\/td\u003e\n\u003ctd\u003eSR5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2020-2022\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eSequoia\u003c\/td\u003e\n\u003ctd\u003eTRD Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018-2022\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eSequoia\u003c\/td\u003e\n\u003ctd\u003eTRD Sport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2005-2015\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTacoma\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2023\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTacoma\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2005-2015\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTacoma\u003c\/td\u003e\n\u003ctd\u003ePre Runner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2023\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTacoma\u003c\/td\u003e\n\u003ctd\u003eSR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2023\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTacoma\u003c\/td\u003e\n\u003ctd\u003eSR5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTacoma\u003c\/td\u003e\n\u003ctd\u003eTrail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTacoma\u003c\/td\u003e\n\u003ctd\u003eTrail Special Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2023\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTacoma\u003c\/td\u003e\n\u003ctd\u003eTRD Off-Road\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015,2017-2023\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTacoma\u003c\/td\u003e\n\u003ctd\u003eTRD Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2023\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTacoma\u003c\/td\u003e\n\u003ctd\u003eTRD Sport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006-2013\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTacoma\u003c\/td\u003e\n\u003ctd\u003eX-Runner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2021\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTundra\u003c\/td\u003e\n\u003ctd\u003e1794 Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007-2013\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTundra\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007-2021\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTundra\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTundra\u003c\/td\u003e\n\u003ctd\u003eNightshade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2021\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTundra\u003c\/td\u003e\n\u003ctd\u003ePlatinum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2021\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTundra\u003c\/td\u003e\n\u003ctd\u003eSR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007-2011,2014-2021\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTundra\u003c\/td\u003e\n\u003ctd\u003eSR5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTundra\u003c\/td\u003e\n\u003ctd\u003eTrail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2017,2019-2021\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTundra\u003c\/td\u003e\n\u003ctd\u003eTRD Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Go Rhino","offers":[{"title":"Default Title","offer_id":67768052351275,"sku":"GOR55366T","price":229.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/30c00bf5984b3ec719c835408dfdc81aL_ab35911b-5661-4815-a914-aafcfbf49525.jpg?v=1792049070"},{"product_id":"go-rhino-rc4-lr-frame-2in-textured-black","title":"Go Rhino RC4 LR Frame - 2in - Textured Black","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eGo Rhino's RC4 LR Bull Bar is a modern, sportier take on classic truck front protection. The 2.5\" diameter tubular steel frame features a steel skid plate with a stylish hexagonal cut out patter, a slot for a 20\" single row LED light bar, and pre-drilled holes along the center crossmember for additional auxiliary lighting. RC4 LR Frame comes with a Limited Lifetime warranty on materials and construction and a 5 year warranty on the Textured Black Finish.\u003c\/p\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/78ea507bf99211b6f3795ea30cb16021.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eLimited Lifetime warranty on materials and construction and a 5 year warranty on the Textured Black Finish.\u003c\/li\u003e\n\u003cli\u003eRC4 LR bull bar frame only, light bar and mounting brackets not included\u003c\/li\u003e\n\u003cli\u003eHexagonal pattern design in skid plate area allows for air flow\u003c\/li\u003e\n\u003cli\u003eComplete kits with lights and mounting brackets also available\u003c\/li\u003e\n\u003cli\u003ePre-drilled holes for additional auxiliary lights\u003c\/li\u003e\n\u003cli\u003eAdjustable mount for 20\" single row light bar\u003c\/li\u003e\n\u003cli\u003eOne-piece 2.5\" tubular steel construction\u003c\/li\u003e\n\u003cli\u003eEasy bolt-on, no-drill installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eColorado\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eColorado\u003c\/td\u003e\n\u003ctd\u003eLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eColorado\u003c\/td\u003e\n\u003ctd\u003eWT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eColorado\u003c\/td\u003e\n\u003ctd\u003eZ71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2021\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eCustom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019-2021\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eCustom Trail Boss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2021\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eHigh Country\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2018\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2021\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019-2021\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eLT Trail Boss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2021\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eLTZ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019-2021\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eRST\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2021\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eSSV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2021\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eWT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500 LD\u003c\/td\u003e\n\u003ctd\u003eCustom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500 LD\u003c\/td\u003e\n\u003ctd\u003eLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500 LD\u003c\/td\u003e\n\u003ctd\u003eWT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500 LTD\u003c\/td\u003e\n\u003ctd\u003eCustom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500 LTD\u003c\/td\u003e\n\u003ctd\u003eCustom Trail Boss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500 LTD\u003c\/td\u003e\n\u003ctd\u003eHigh Country\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500 LTD\u003c\/td\u003e\n\u003ctd\u003eLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500 LTD\u003c\/td\u003e\n\u003ctd\u003eLT Trail Boss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500 LTD\u003c\/td\u003e\n\u003ctd\u003eLTZ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500 LTD\u003c\/td\u003e\n\u003ctd\u003eRST\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500 LTD\u003c\/td\u003e\n\u003ctd\u003eSSV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500 LTD\u003c\/td\u003e\n\u003ctd\u003eWT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009-2010\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 1500\u003c\/td\u003e\n\u003ctd\u003eLaramie\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009-2010\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 1500\u003c\/td\u003e\n\u003ctd\u003eSLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009-2010\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 1500\u003c\/td\u003e\n\u003ctd\u003eST\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 2500\u003c\/td\u003e\n\u003ctd\u003eLaramie\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 2500\u003c\/td\u003e\n\u003ctd\u003ePower Wagon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 2500\u003c\/td\u003e\n\u003ctd\u003eSLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 2500\u003c\/td\u003e\n\u003ctd\u003eST\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 2500\u003c\/td\u003e\n\u003ctd\u003eSXT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 2500\u003c\/td\u003e\n\u003ctd\u003eTRX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 3500\u003c\/td\u003e\n\u003ctd\u003eLaramie\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 3500\u003c\/td\u003e\n\u003ctd\u003eSLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 3500\u003c\/td\u003e\n\u003ctd\u003eST\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2025\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eKing Ranch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2025\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eLariat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2023\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2025\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003ePlatinum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003ePolice Responder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2025\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eSSV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2024-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eSTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2025\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eTremor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eXL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eXLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009-2010\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-250 Super Duty\u003c\/td\u003e\n\u003ctd\u003eCabela's\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-250 Super Duty\u003c\/td\u003e\n\u003ctd\u003eFX4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004-2010\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-250 Super Duty\u003c\/td\u003e\n\u003ctd\u003eHarley-Davidson Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004-2024\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-250 Super Duty\u003c\/td\u003e\n\u003ctd\u003eKing Ranch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2024\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-250 Super Duty\u003c\/td\u003e\n\u003ctd\u003eLariat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018-2024\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-250 Super Duty\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013-2024\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-250 Super Duty\u003c\/td\u003e\n\u003ctd\u003ePlatinum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2024\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-250 Super Duty\u003c\/td\u003e\n\u003ctd\u003eXL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2024\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-250 Super Duty\u003c\/td\u003e\n\u003ctd\u003eXLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009-2010\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-350 Super Duty\u003c\/td\u003e\n\u003ctd\u003eCabela's\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-350 Super Duty\u003c\/td\u003e\n\u003ctd\u003eFX4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004-2010\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-350 Super Duty\u003c\/td\u003e\n\u003ctd\u003eHarley-Davidson Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2003-2024\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-350 Super Duty\u003c\/td\u003e\n\u003ctd\u003eKing Ranch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2024\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-350 Super Duty\u003c\/td\u003e\n\u003ctd\u003eLariat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018-2024\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-350 Super Duty\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013-2024\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-350 Super Duty\u003c\/td\u003e\n\u003ctd\u003ePlatinum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2024\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-350 Super Duty\u003c\/td\u003e\n\u003ctd\u003eXL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2024\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-350 Super Duty\u003c\/td\u003e\n\u003ctd\u003eXLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eCanyon\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eCanyon\u003c\/td\u003e\n\u003ctd\u003eSL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eCanyon\u003c\/td\u003e\n\u003ctd\u003eSLE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eCanyon\u003c\/td\u003e\n\u003ctd\u003eSLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2023\u003c\/td\u003e\n\u003ctd\u003eNissan\u003c\/td\u003e\n\u003ctd\u003eTITAN XD\u003c\/td\u003e\n\u003ctd\u003ePlatinum Reserve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2023\u003c\/td\u003e\n\u003ctd\u003eNissan\u003c\/td\u003e\n\u003ctd\u003eTITAN XD\u003c\/td\u003e\n\u003ctd\u003ePRO-4X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2023\u003c\/td\u003e\n\u003ctd\u003eNissan\u003c\/td\u003e\n\u003ctd\u003eTITAN XD\u003c\/td\u003e\n\u003ctd\u003eS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2021\u003c\/td\u003e\n\u003ctd\u003eNissan\u003c\/td\u003e\n\u003ctd\u003eTITAN XD\u003c\/td\u003e\n\u003ctd\u003eSL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2023\u003c\/td\u003e\n\u003ctd\u003eNissan\u003c\/td\u003e\n\u003ctd\u003eTITAN XD\u003c\/td\u003e\n\u003ctd\u003eSV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2026\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eBig Horn\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012-2018,2026\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eExpress\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013-2019,2022-2023\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eHFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2026\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eLaramie\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2015\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eLaramie Limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2021\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eLaramie Longhorn\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2026\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eLimited Longhorn\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2026\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eLone Star\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eLonghorn\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2016\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eOutdoorsman\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eR\/T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2026\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eRebel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2025-2026\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eRHO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2018\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eSLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2018,2025-2026\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eSpecial Service\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2018\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eSport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2012\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eST\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2026\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eTradesman\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eTradesman HD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2025\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eTradesman HFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2024\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eTRX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eTRX Launch Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2025-2026\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eTungsten\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2025-2026\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eWarlock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500 Classic\u003c\/td\u003e\n\u003ctd\u003eBig Horn\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019-2022\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500 Classic\u003c\/td\u003e\n\u003ctd\u003eExpress\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500 Classic\u003c\/td\u003e\n\u003ctd\u003eLaramie\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500 Classic\u003c\/td\u003e\n\u003ctd\u003eLone Star\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019-2022\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500 Classic\u003c\/td\u003e\n\u003ctd\u003eSLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019-2023\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500 Classic\u003c\/td\u003e\n\u003ctd\u003eSpecial Service\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019-2024\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e1500 Classic\u003c\/td\u003e\n\u003ctd\u003eTradesman\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013-2018\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e2500\u003c\/td\u003e\n\u003ctd\u003eBig Horn\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2018\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e2500\u003c\/td\u003e\n\u003ctd\u003eLaramie\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2015\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e2500\u003c\/td\u003e\n\u003ctd\u003eLaramie Limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2018\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e2500\u003c\/td\u003e\n\u003ctd\u003eLaramie Longhorn\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2018\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e2500\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013-2015\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e2500\u003c\/td\u003e\n\u003ctd\u003eLone Star\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012-2016\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e2500\u003c\/td\u003e\n\u003ctd\u003eOutdoorsman\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2018\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e2500\u003c\/td\u003e\n\u003ctd\u003ePower Wagon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2018\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e2500\u003c\/td\u003e\n\u003ctd\u003eSLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2013\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e2500\u003c\/td\u003e\n\u003ctd\u003eST\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013-2018\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e2500\u003c\/td\u003e\n\u003ctd\u003eTradesman\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013-2018\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e3500\u003c\/td\u003e\n\u003ctd\u003eBig Horn\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2018\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e3500\u003c\/td\u003e\n\u003ctd\u003eLaramie\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2015\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e3500\u003c\/td\u003e\n\u003ctd\u003eLaramie Limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2018\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e3500\u003c\/td\u003e\n\u003ctd\u003eLaramie Longhorn\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2018\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e3500\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013-2015,2017\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e3500\u003c\/td\u003e\n\u003ctd\u003eLone Star\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2018\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e3500\u003c\/td\u003e\n\u003ctd\u003eSLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2013\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e3500\u003c\/td\u003e\n\u003ctd\u003eST\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013-2018\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e3500\u003c\/td\u003e\n\u003ctd\u003eTradesman\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003e4Runner\u003c\/td\u003e\n\u003ctd\u003e40th Anniversary Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2024\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003e4Runner\u003c\/td\u003e\n\u003ctd\u003eSR5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018-2024\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003e4Runner\u003c\/td\u003e\n\u003ctd\u003eSR5 Premium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016,2021-2022\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003e4Runner\u003c\/td\u003e\n\u003ctd\u003eTrail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2020-2021\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003e4Runner\u003c\/td\u003e\n\u003ctd\u003eVenture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2023\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTacoma\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2023\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTacoma\u003c\/td\u003e\n\u003ctd\u003eSR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2023\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTacoma\u003c\/td\u003e\n\u003ctd\u003eSR5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTacoma\u003c\/td\u003e\n\u003ctd\u003eTrail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTacoma\u003c\/td\u003e\n\u003ctd\u003eTrail Special Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2023\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTacoma\u003c\/td\u003e\n\u003ctd\u003eTRD Off-Road\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2023\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTacoma\u003c\/td\u003e\n\u003ctd\u003eTRD Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2023\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTacoma\u003c\/td\u003e\n\u003ctd\u003eTRD Sport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2021\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTundra\u003c\/td\u003e\n\u003ctd\u003e1794 Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2021\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTundra\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTundra\u003c\/td\u003e\n\u003ctd\u003eNightshade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2021\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTundra\u003c\/td\u003e\n\u003ctd\u003ePlatinum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2021\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTundra\u003c\/td\u003e\n\u003ctd\u003eSR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2021\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTundra\u003c\/td\u003e\n\u003ctd\u003eSR5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTundra\u003c\/td\u003e\n\u003ctd\u003eTrail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2017,2019-2021\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTundra\u003c\/td\u003e\n\u003ctd\u003eTRD Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Go Rhino","offers":[{"title":"Default Title","offer_id":67768052384043,"sku":"GOR55411T","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/b3ecd07a1a33b45c0707405dbc055f62L.jpg?v=1792049073"},{"product_id":"addictive-desert-designs-frame-horn-gusset-kit-2022-2026-ford-bronco-raptor-ac2303701na","title":"Addictive Desert Designs Frame Horn Gusset Kit for 2022-2026 Ford Bronco Raptor AC2303701NA","description":"\u003cp\u003eThe Frame Horn Gusset Kit from Addictive Desert Designs (ADD) reinforces the factory frame horn mounts on the Ford Bronco Raptor and other 2021-2026 Broncos.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTargets a known weak point.\u003c\/strong\u003e ADD says the OEM frame horn mounts on 6th-gen Broncos are failure prone, and that frame horn damage has been seen when a winch or tow hooks are used in recovery situations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBacks up your bumper's recovery points.\u003c\/strong\u003e The kit bolts to the frame horn with heavy-duty grade 8 hardware, so you can use the winch and recovery points of your stock or aftermarket front bumper with more confidence. It is meant for winch-capable bumpers or bumpers with integrated recovery points.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHeavy-duty steel.\u003c\/strong\u003e The gussets are 1018 steel in a dual-stage hammer black powder coat. Installation is fully bolt-on, and the kit is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReinforces the failure-prone OEM frame horn mounts\u003c\/li\u003e\n\u003cli\u003eIntended for winch-capable or recovery-point-integrated bumpers\u003c\/li\u003e\n\u003cli\u003eIncludes heavy-duty grade 8 hardware\u003c\/li\u003e\n\u003cli\u003eHammer black powder coat\u003c\/li\u003e\n\u003cli\u003eFully bolt-on installation\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProp 65.\u003c\/strong\u003e WARNING: This product can expose you to chemicals including crystalline silica, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003eFitment: 2022-2026 Ford Bronco Raptor, plus 2021-2026 Ford Bronco. Fitment confirmed against Addictive Desert Designs' published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/2021-Bronco-FrameHornGussets-InstallGuide.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/3c782cc449f747da48676aa41148a582.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (supplier copy)\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eAll trims\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":67776411599147,"sku":"ADDAC2303701NA","price":143.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/2021-2023-Ford-Bronco-_-Bronco-Raptor-Frame-Horn-Gusset-Kit.jpg?v=1794509615"},{"product_id":"addictive-desert-designs-honeybadger-winch-front-bumper-2010-2014-ford-f-150-raptor-f017275050103","title":"Addictive Desert Designs HoneyBadger Winch Front Bumper for 2010-2014 Ford F-150 Raptor F017275050103","description":"\u003cp\u003eThe HoneyBadger front bumper reshapes the nose of a 2010-2014 Ford F-150 Raptor with an aggressive, body-hugging design from Addictive Desert Designs. It adds lighting, recovery points and a winch mount in one bolt-on bumper.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLighting built in.\u003c\/strong\u003e A 40 in. radius (curved) LED light bar mounts up top, a straight 20 in. bar sits in the center, and each side panel has a mount for a 10 in. light bar behind it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRecovery ready.\u003c\/strong\u003e Reinforced clevis mounts accept soft shackles, and the bumper is made with a winch mount so you can add a winch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade to fit the truck.\u003c\/strong\u003e The bumper is shaped to follow the front of the Raptor, with satin black side panel inserts against a hammer black bumper finish, in 3\/16 in. mild steel and made in America.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWinch mount\u003c\/li\u003e\n\u003cli\u003eBumper color: hammer black; panel color: satin black\u003c\/li\u003e\n\u003cli\u003eReinforced clevis mounts for soft shackles\u003c\/li\u003e\n\u003cli\u003eTop mount: 40 in. RDS light bar\u003c\/li\u003e\n\u003cli\u003eLower mount: 20 in. light bar\u003c\/li\u003e\n\u003cli\u003eSide mount: 10 in. light bar\u003c\/li\u003e\n\u003cli\u003e3\/16 in. mild steel construction\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProp 65 warning.\u003c\/strong\u003e This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003eFitment: Ford F-150 Raptor, 2010-2014. Fitment confirmed against Addictive Desert Designs' own product listing for the 2010-2014 Ford Raptor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/ADD_2010-2014_Ford_Raptor_HoneyBadger_Front_Bumper_Installation_Instructions.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstall Instructions\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/419df90d3551583b851288ce06213b66.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (supplier copy)\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2014\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":67776414089515,"sku":"ADDF017275050103","price":2879.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/raptor-front-bumper.jpg?v=1794509801"},{"product_id":"addictive-desert-designs-add-pro-front-bumper-2010-2014-ford-f-150-raptor-f018052100103","title":"Addictive Desert Designs ADD PRO Front Bumper for 2010-2014 Ford F-150 Raptor F018052100103","description":"\u003cp\u003eThe Addictive Desert Designs ADD PRO front bumper is a frame cut replacement bumper for the 2010-2014 Ford F-150 Raptor. It is built to give the truck more approach angle without giving up the look of the factory body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eContoured to the Raptor.\u003c\/strong\u003e ADD shapes the bumper to follow the body lines of the truck, so it reads as part of the design instead of an add-on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSteel tube with a skid plate.\u003c\/strong\u003e The bumper is built from .120 in. wall steel tubing for strength and durability, with an aluminum skid plate underneath for protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLighting tucked out of the way.\u003c\/strong\u003e Mounting options sit underneath the main tube, keeping lights protected. The universal mount takes up to 6 cube lights or a 20 in. curved light bar.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFrame cut design for added approach angle\u003c\/li\u003e\n\u003cli\u003e.120 in. wall steel tube construction\u003c\/li\u003e\n\u003cli\u003eAluminum skid plate\u003c\/li\u003e\n\u003cli\u003eUniversal light mount for up to 6 cube lights or a 20 in. curved light bar\u003c\/li\u003e\n\u003cli\u003eHammer black powder coat finish\u003c\/li\u003e\n\u003cli\u003eSatin black powder coat panels\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProp 65.\u003c\/strong\u003e WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003eFitment: 2010-2014 Ford F-150 Raptor. Fitment confirmed against Addictive Desert Designs' published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/ADD-2010-2014-Ford-Raptor-ADDPRO-Front-Bumper-Installation-Instructions_45d02ae7-be7f-44cd-b34e-8f69918f54ef.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/b7cbf1755f5c7da85c902fad3837ef97.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (supplier copy)\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2014\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eSVT Raptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":67776414155051,"sku":"ADDF018052100103","price":2069.08,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/F018052100103.PT00.jpg?v=1794510076"},{"product_id":"addictive-desert-designs-add-pro-v2-front-bumper-2010-2014-ford-f-150-raptor-f01806na0103","title":"Addictive Desert Designs ADD PRO V2 Front Bumper for 2010-2014 Ford F-150 Raptor F01806NA0103","description":"\u003cp\u003eThe Addictive Desert Designs ADD PRO V2 is a frame cut front bumper for the 2010-2014 Ford F-150 Raptor, aimed at giving the truck maximum approach angle for off-road driving while keeping the factory look.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eContoured without a valance.\u003c\/strong\u003e ADD says the V2 follows the body lines of the Raptor closely enough that no plastic valance is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSteel tube with a skid plate.\u003c\/strong\u003e The bumper uses .120 in. wall steel tubing for strength and durability and includes an aluminum skid plate for underside protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo-tone finish.\u003c\/strong\u003e The frame is finished in hammer black powder coat and the panels in satin black powder coat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFrame cut design for maximum approach angle\u003c\/li\u003e\n\u003cli\u003eContours the body lines without a plastic valance\u003c\/li\u003e\n\u003cli\u003e.120 in. wall steel tube construction\u003c\/li\u003e\n\u003cli\u003eAluminum skid plate\u003c\/li\u003e\n\u003cli\u003eHammer black powder coat finish\u003c\/li\u003e\n\u003cli\u003eSatin black powder coat panels\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProp 65.\u003c\/strong\u003e WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003eFitment: 2010-2014 Ford F-150 Raptor. Fitment confirmed against Addictive Desert Designs' published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/ADD-2010-2014-Ford-Raptor-ADDPRO-Front-Bumper-Installation-Instructions_45d02ae7-be7f-44cd-b34e-8f69918f54ef.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/b7cbf1755f5c7da85c902fad3837ef97.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (supplier copy)\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2014\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eSVT Raptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":67776414286123,"sku":"ADDF01806NA0103","price":2069.08,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/F01806NA0103.PT00.jpg?v=1794510104"},{"product_id":"addictive-desert-designs-phantom-front-bumper-2017-2020-ford-f-150-raptor-f110263200103","title":"Addictive Desert Designs Phantom Front Bumper for 2017-2020 Ford F-150 Raptor F110263200103","description":"\u003cp\u003eThe Addictive Desert Designs Phantom is a low-profile, fully bolt-on front bumper for the 2017-2020 (2nd generation) Ford F-150 Raptor. Its styling draws on prerunner bumpers, with a knife's edge shape that ADD says echoes trailing arms.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlate steel with a vented skid plate.\u003c\/strong\u003e The bumper is built from plate steel and carries a lightweight 3\/16 in. aluminum skid plate. Vented cutouts in the plate let air reach the factory intercooler, which stays in place; no intercooler relocation is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLighting options.\u003c\/strong\u003e A central mount takes a 20 in. radius LED light bar, and 10 in. SR LED light bars mount behind each side panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSensors and cruise control.\u003c\/strong\u003e Sensor mounts keep the factory parking sensors working. Installation requires an Adaptive Cruise Control relocation bracket, which ADD offers as an option.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKnife's edge, low-profile design\u003c\/li\u003e\n\u003cli\u003ePlate steel construction\u003c\/li\u003e\n\u003cli\u003eFull-size aluminum skid plate with air vents\u003c\/li\u003e\n\u003cli\u003eFits a 20 in. radius LED light bar\u003c\/li\u003e\n\u003cli\u003eFits two 10 in. SR LED light bars\u003c\/li\u003e\n\u003cli\u003eRetains the OEM intercooler and parking sensors\u003c\/li\u003e\n\u003cli\u003eRetains Adaptive Cruise Control function with the optional ACC relocation bracket\u003c\/li\u003e\n\u003cli\u003eHammer black powder coat steel\u003c\/li\u003e\n\u003cli\u003eSatin black powder coat aluminum accent panels\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProp 65.\u003c\/strong\u003e WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003eFitment: 2017-2020 Ford F-150 Raptor. Fitment confirmed against Addictive Desert Designs' published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/2ndgen-raptor-phantom-front-installguide.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/5afe14476001a926db4be0ecd0eb2bb2.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (supplier copy)\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":67776414384427,"sku":"ADDF110263200103","price":2069.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/2017-2020-Ford-Raptor-Phantom-Front-Bumper_Installed-05.jpg?v=1794510120"},{"product_id":"addictive-desert-designs-add-pro-bolt-on-v1-front-bumper-2017-2020-ford-f-150-raptor-f118102100103","title":"Addictive Desert Designs ADD PRO Bolt-On V1 Front Bumper for 2017-2020 Ford F-150 Raptor F118102100103","description":"\u003cp\u003eThe Addictive Desert Designs ADD PRO Bolt-On V1 gives the 2017-2020 Ford F-150 Raptor the clearance and look of a frame cut bumper without cutting the frame. ADD lists it for the Raptor only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFlush, contoured fit.\u003c\/strong\u003e The bumper stays flush with the front of the Raptor and follows the body lines without needing a plastic valance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCamera and intercooler stay put.\u003c\/strong\u003e The front camera keeps full function, and the vented skid plate gives the factory intercooler proper airflow, so the intercooler does not need to be moved.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSteel tube with a CNC cut skid plate.\u003c\/strong\u003e Construction is .120 in. wall steel tubing with a CNC cut aluminum skid plate for protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLighting.\u003c\/strong\u003e Mounts under the main tube hold up to 6 cube lights or a 20 in. radius LED bar. ADD also sells an optional add-on light hoop, sold separately, that adds mounting for four 6 in. round lights.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBolt-on install, no frame cutting\u003c\/li\u003e\n\u003cli\u003eTrue contour to the vehicle\u003c\/li\u003e\n\u003cli\u003eRetains full front camera function\u003c\/li\u003e\n\u003cli\u003eRetains the OEM intercooler\u003c\/li\u003e\n\u003cli\u003eLight mounts for up to 6 cube lights or a 20 in. radius LED bar\u003c\/li\u003e\n\u003cli\u003e.120 in. wall steel tubing\u003c\/li\u003e\n\u003cli\u003eCNC cut aluminum skid plate\u003c\/li\u003e\n\u003cli\u003eSatin black powder coat panels and hammer black powder coat finish\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProp 65.\u003c\/strong\u003e WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003eFitment: 2017-2020 Ford F-150 Raptor only. Fitment confirmed against Addictive Desert Designs' published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/ADD-2017-Current-Ford-Raptor-ADD-Pro-Bolt-On-Front-Bumper-Installation-Instructions.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/09fe9a6f98ccda2fb1ecd8d90fae206f.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (supplier copy)\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":67776414613803,"sku":"ADDF118102100103","price":2429.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/ford-raptor-front-bumper_3d7ace00-d7b9-4c11-ad44-a033dfc171f8.jpg?v=1794510143"},{"product_id":"addictive-desert-designs-stealth-fighter-front-bumper-2018-2020-ford-f-150-raptor-f181192860103","title":"Addictive Desert Designs Stealth Fighter Front Bumper for 2018-2020 Ford F-150 Raptor F181192860103","description":"\u003cp\u003eThe Stealth Fighter is Addictive Desert Designs' steel plate front bumper for the 2018-2020 Ford F-150 Raptor. ADD describes it as one of its tightest fitting and most aggressive bumpers, built to follow the factory lines while adding real steel protection up front.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTight, factory-style fit.\u003c\/strong\u003e A modern radius plate design keeps the bumper close to the front of the truck, matching the stock look instead of hanging out in front of it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRoom for serious lighting.\u003c\/strong\u003e The center of the bumper has a universal light mount system that takes up to 10 cube lights or a 40 in. radius or straight LED bar, or anything in between. Extra mounts behind the side panels take 10 in. SR LED bars.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade for recovery gear.\u003c\/strong\u003e Reinforced clevis mounts accept soft shackles. ADD recommends its separate frame reinforcement kit when you use soft shackles, which gives the factory frame horns added strength with a winch or soft shackles and is bolt-on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEverything for the lights is in the box.\u003c\/strong\u003e It ships with ADD's Universal Light Mount Kit so you can install any brand and size of lighting. The design is covered by US Patent 9,796,343.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eModern radius plate design\u003c\/li\u003e\n\u003cli\u003eDirect fit, no cutting or welding required\u003c\/li\u003e\n\u003cli\u003eFully bolt-on\u003c\/li\u003e\n\u003cli\u003eUniversal center light mount for up to 10 cube lights or a 40 in. straight or radius LED\u003c\/li\u003e\n\u003cli\u003eMounts for 10 in. SR LEDs on the sides\u003c\/li\u003e\n\u003cli\u003eReinforced clevis mounts accept soft shackles\u003c\/li\u003e\n\u003cli\u003eLaser cut skid plates, tabs and plates\u003c\/li\u003e\n\u003cli\u003e0.120 in. wall steel tube construction\u003c\/li\u003e\n\u003cli\u003eFully boxed frame horns\u003c\/li\u003e\n\u003cli\u003eHammer black powder coat finish\u003c\/li\u003e\n\u003cli\u003eStainless steel hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFitment: ADD lists this part for the 2018-2020 F-150, which includes the Raptor, and does not name any exclusion for the Raptor. Fitment confirmed against Addictive Desert Designs' published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0627\/4508\/4140\/files\/ADD-2018-Current-Ford-F150-Stealth-Fighter-Front-Bumper-Installation-Guide.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstall Instructions\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/d050549236227ad7f9ab25c51e26ec0c.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (supplier copy)\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eAll trims\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":67776414810411,"sku":"ADDF181192860103","price":2249.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/2018-ford-f-150-front-bumper_ff553cc9-a2fc-450a-9fa1-9de8f79b0959.jpg?v=1794516943"},{"product_id":"addictive-desert-designs-black-label-front-bumper-2024-2026-ford-f-150-raptor-f1900305080103","title":"Addictive Desert Designs Black Label Front Bumper for 2024-2026 Ford F-150 Raptor F1900305080103","description":"\u003cp\u003eThe Black Label is Addictive Desert Designs' steel front bumper for the 2024-2026 Ford F-150 Raptor. It adds an aggressive look and a place to mount lighting while following the truck's factory bodylines for a trim fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSlim, finished details.\u003c\/strong\u003e Slim wings and a dual-stage hammer black powder coat give it a sleek look, and satin black powder coated accent panels and detailed cutouts add finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLighting where you need it.\u003c\/strong\u003e The integrated center mount holds one 20 in. LED light bar for supplemental lighting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKeeps the factory electronics working.\u003c\/strong\u003e The bumper has mounting points for the OEM parking sensors so they keep full function. Adaptive cruise control is retained when you add ADD's F-150 ACC Relocation Bracket, sold separately. It also works with both OEM and ADD intercoolers, and a shutter motor relocation bracket is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStraightforward install.\u003c\/strong\u003e It is a 3 piece, fully bolt-on design built from steel and made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAggressive plate steel design\u003c\/li\u003e\n\u003cli\u003eOne 20 in. LED light bar mount\u003c\/li\u003e\n\u003cli\u003eRetains OEM parking sensors\u003c\/li\u003e\n\u003cli\u003eRetains adaptive cruise control with the F-150 relocation bracket\u003c\/li\u003e\n\u003cli\u003eWorks with OEM and ADD intercoolers\u003c\/li\u003e\n\u003cli\u003eIncluded shutter motor relocation bracket\u003c\/li\u003e\n\u003cli\u003e2-stage hammer black powder coat finish\u003c\/li\u003e\n\u003cli\u003eSatin black powder coated accent panels\u003c\/li\u003e\n\u003cli\u003e3 piece design\u003c\/li\u003e\n\u003cli\u003eFully bolt-on installation\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProp 65.\u003c\/strong\u003e WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003eFitment: ADD lists this part for the 2024+ F-150, which includes the Raptor, and does not name any exclusion for the Raptor. Table years are 2024-2026. Fitment confirmed against Addictive Desert Designs' published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/ADD-InstallGuide-F1900305080103_37789b53-4da1-42a8-8dcf-16d5edfe9191.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBumper Install Guide\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/ADD-2021-F150-ACC-Bracket-Installation-Instructions.pdf\" target=\"_blank\" rel=\"noopener\"\u003eACC Bracket Install Guide\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/ec72174bfa97568e999d4b46f7bad1ea.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (supplier copy)\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2024-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2024-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eAll trims\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":67776414941483,"sku":"ADDF1900305080103","price":1439.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/2024-Ford-F-150-Black-Label-Front-Bumper-7.jpg?v=1794516956"},{"product_id":"addictive-desert-designs-bomber-front-bumper-baja-designs-lp6-2021-2026-ford-f-150-raptor-f210014100103","title":"Addictive Desert Designs Bomber Front Bumper with 3 Baja Designs LP6 Light Mounts for 2021-2026 Ford F-150 Raptor \u0026 Raptor R F210014100103","description":"\u003cp\u003eThe Addictive Desert Designs Bomber is a low-profile front bumper built for the third-generation Ford F-150 Raptor and the Raptor R. This version is set up for three Baja Designs LP6 round lights, so you get a finished lighting layout straight out of the box.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt to protect without losing clearance.\u003c\/strong\u003e The bumper pairs plate steel with lightweight aluminum panels and a full 3\/16-inch aluminum skid plate. ADD states it weighs less than the factory front bumper, so the truck's nose is better protected without adding bulk.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLighting where you want it.\u003c\/strong\u003e Three mounts hold Baja Designs LP6 round lights across the center, and cube light mounts on each wing add side lighting. ADD also builds the Bomber with four Rigid 360 6-inch mounts or two 20-inch light bar mounts; this listing is the Baja Designs LP6 version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKeeps the factory hardware working.\u003c\/strong\u003e The OEM tow hooks and OEM parking sensors are retained, and the bumper is fully bolt-on. A shutter motor bracket is included with the bumper. For trucks with adaptive cruise control, ADD offers a separate ACC relocation bracket (sold separately) to preserve full ACC use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWorks with ADD cooling upgrades.\u003c\/strong\u003e ADD lists the bumper as compatible with its Raptor Intercooler Kit (IC1650KIT) and the Raptor R High Mount Heat Exchanger Kit (AC21112301NA), both sold separately. If you install the intercooler upgrade on a 2024+ truck, an additional shutter motor relocation kit is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFinish and origin.\u003c\/strong\u003e Made in America.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eModern plate steel design\u003c\/li\u003e\n\u003cli\u003eFull 3\/16-inch aluminum skid plate\u003c\/li\u003e\n\u003cli\u003eWeighs less than the OEM front bumper\u003c\/li\u003e\n\u003cli\u003eMounts for 3 Baja Designs LP6 round lights\u003c\/li\u003e\n\u003cli\u003eCube light mounts on each side wing\u003c\/li\u003e\n\u003cli\u003eRetains OEM tow hooks\u003c\/li\u003e\n\u003cli\u003eRetains OEM parking sensors\u003c\/li\u003e\n\u003cli\u003eShutter motor bracket included\u003c\/li\u003e\n\u003cli\u003eFully bolt-on\u003c\/li\u003e\n\u003cli\u003eMade in America\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFitment: 2021-2026 Ford F-150 Raptor and 2023-2026 Ford F-150 Raptor R. Fitment confirmed against Addictive Desert Designs' published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/2021-Raptor-Bomber-Front-bumper-Installation-6-6.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBumper Install Guide\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/63e59a0a10ee9e88a1ff2d9c319f3095.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (supplier copy)\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":67776414974251,"sku":"ADDF210014100103","price":2339.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/2021-Raptor-Front-Bumper_aa852f6d-27f0-4eb5-b09f-02afe85bf671.jpg?v=1794510085"},{"product_id":"addictive-desert-designs-bomber-front-bumper-rigid-360-2021-2026-ford-f-150-raptor-f210014110103","title":"Addictive Desert Designs Bomber Front Bumper with 4 Rigid 360 6in Light Mounts for 2021-2026 Ford F-150 Raptor \u0026 Raptor R F210014110103","description":"\u003cp\u003eThe Addictive Desert Designs Bomber is a low-profile front bumper built for the third-generation Ford F-150 Raptor and the Raptor R. This version has mounts for four RIGID 360 6-inch round lights, giving the truck a full row of forward lighting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt to protect without losing clearance.\u003c\/strong\u003e The bumper pairs plate steel with lightweight aluminum panels and a full 3\/16-inch aluminum skid plate. ADD states it weighs less than the factory front bumper.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLighting where you want it.\u003c\/strong\u003e Four mounts hold RIGID 360 6-inch round lights across the center, and cube light mounts on each wing add side lighting. ADD also builds the Bomber with three Baja Designs LP6 mounts or two 20-inch light bar mounts; this listing is the Rigid 360 version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFinish.\u003c\/strong\u003e The steel is coated in hammer black powder coat, while the aluminum panels and skid plate carry a satin black powder coat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKeeps the factory hardware working.\u003c\/strong\u003e The OEM tow hooks and OEM parking sensors are retained, and the bumper is fully bolt-on and made in America. A shutter motor bracket is included. For trucks with adaptive cruise control, ADD offers a separate ACC relocation bracket (sold separately) to preserve full ACC use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWorks with ADD cooling upgrades.\u003c\/strong\u003e ADD lists the bumper as compatible with its Raptor Intercooler Kit (IC1650KIT) and the Raptor R High Mount Heat Exchanger Kit (AC21112301NA), both sold separately. If you install the intercooler upgrade on a 2024+ truck, an additional shutter motor relocation kit is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eModern plate steel design\u003c\/li\u003e\n\u003cli\u003eFull 3\/16-inch aluminum skid plate\u003c\/li\u003e\n\u003cli\u003eWeighs less than the OEM front bumper\u003c\/li\u003e\n\u003cli\u003eMounts for 4 RIGID 360 6-inch round lights\u003c\/li\u003e\n\u003cli\u003eCube light mounts on each side wing\u003c\/li\u003e\n\u003cli\u003eHammer black powder coat on the bumper, satin black on panels and skid plate\u003c\/li\u003e\n\u003cli\u003eRetains OEM tow hooks\u003c\/li\u003e\n\u003cli\u003eRetains OEM parking sensors\u003c\/li\u003e\n\u003cli\u003eShutter motor bracket included\u003c\/li\u003e\n\u003cli\u003eFully bolt-on, made in America\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFitment: 2021-2026 Ford F-150 Raptor and 2023-2026 Ford F-150 Raptor R. Fitment confirmed against Addictive Desert Designs' published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/2021-Raptor-Bomber-Front-bumper-Installation-6-6.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBumper Install Guide\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/63e59a0a10ee9e88a1ff2d9c319f3095.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (supplier copy)\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":67776416973099,"sku":"ADDF210014110103","price":2339.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/2021-Raptor-Front-Bumper.jpg?v=1794510121"},{"product_id":"addictive-desert-designs-stealth-fighter-front-bumper-2021-2026-ford-f-150-raptor-f210151140103","title":"Addictive Desert Designs Stealth Fighter Front Bumper for 2021-2026 Ford F-150 Raptor \u0026 Raptor R F210151140103","description":"\u003cp\u003eThe Stealth Fighter is Addictive Desert Designs' best-known bumper line, and this version is built for the third-generation Ford F-150 Raptor and the Raptor R. It follows the truck's body lines closely while improving ground clearance and approach angle over the factory bumper.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA tight fit with room for lights.\u003c\/strong\u003e The face of the bumper sits only 1\/2 inch proud of the OEM bumper, yet it still has space to hide LED lighting inside. The center mount takes a 40-inch radius light bar or up to ten LED cube lights, and two side mounts hold RIGID 10-inch SR light bars. The side mounts sit behind satin black aluminum panels with vented slots, so unused openings never leave empty holes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProtection and recovery.\u003c\/strong\u003e Modern radius plate steel gives more protection than the factory bumper, and two reinforced clevis mounts accept soft shackles for recovery. A hammer black powder coat guards against rust and suits the factory exterior trim.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKeeps the factory hardware working.\u003c\/strong\u003e The OEM parking sensors and tow hooks are retained and the bumper is fully bolt-on and made in America. A shutter motor bracket is included. For trucks with adaptive cruise control, ADD offers a separate ACC relocation bracket (sold separately) that moves the sensor behind the grille.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWorks with ADD cooling upgrades and winch kit.\u003c\/strong\u003e ADD lists the bumper as compatible with its Raptor Intercooler Kit (IC1650KIT) and the Raptor R High Mount Heat Exchanger Kit (AC21112301NA), both sold separately; a 2024+ truck with the intercooler upgrade needs an additional shutter motor relocation kit. ADD also sells a Stealth Fighter Winch Kit conversion for this bumper.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eModern radius plate steel design\u003c\/li\u003e\n\u003cli\u003eUniversal light mount kit included for any size or brand of lighting\u003c\/li\u003e\n\u003cli\u003eCenter mount fits a 40-inch radius light bar or up to 10 cube lights\u003c\/li\u003e\n\u003cli\u003eSide mounts for RIGID 10-inch SR LED lights\u003c\/li\u003e\n\u003cli\u003eReinforced clevis mounts accept soft shackles\u003c\/li\u003e\n\u003cli\u003eRetains OEM parking sensors and tow hooks\u003c\/li\u003e\n\u003cli\u003eSatin black aluminum side panels, hammer black powder coat\u003c\/li\u003e\n\u003cli\u003eShutter motor bracket included\u003c\/li\u003e\n\u003cli\u003eFully bolt-on, made in America\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFitment: 2021-2026 Ford F-150 Raptor and 2023-2026 Ford F-150 Raptor R. Fitment confirmed against Addictive Desert Designs' published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/21-22-RaptorSF-FB-winchkit.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBumper \u0026amp; Winch Kit Install Guide\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/b823021dcddf70004c0af4892b00682d.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (supplier copy)\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":67776417071403,"sku":"ADDF210151140103","price":2429.08,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/3rd-Gen-Raptor-Front-Bumper.jpg?v=1794510147"},{"product_id":"addictive-desert-designs-honeybadger-front-bumper-2021-2026-ford-f-150-raptor-f210211180103","title":"Addictive Desert Designs HoneyBadger Front Bumper with Top Hoop for 2021-2026 Ford F-150 Raptor \u0026 Raptor R F210211180103","description":"\u003cp\u003eThe HoneyBadger from Addictive Desert Designs is a sharp-angled, rugged front bumper for the 2021+ Ford F-150 Raptor and the 2023 Raptor R. This listing is the version with the top hoop, which carries a curved light bar above the bumper.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLighting in protected positions.\u003c\/strong\u003e The top hoop holds a 30-inch radius LED light bar that follows the curve of the truck's front end. A 20-inch light bar can sit behind the HoneyBadger claw cutaways in the center, and 10-inch light bars mount behind each side panel for extra trail lighting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShaped to the truck.\u003c\/strong\u003e The bumper is designed to follow the Raptor's body lines closely while giving the front end a more aggressive stance. The steel has a hammer black powder coat and the aluminum panels a satin black powder coat, which protects against rust.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSensor and non-sensor trucks.\u003c\/strong\u003e If your Raptor has the 801A High package, the front parking sensors install into the bumper. For trucks with the 800A Standard package, ADD ships sensor plugs to fill the mount holes. The OEM tow hooks fit underneath the bumper, and it is fully bolt-on and made in America.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWorks with ADD upgrades.\u003c\/strong\u003e A shutter motor bracket is included. ADD lists compatibility with its Raptor Intercooler Kit (IC1650KIT) and Raptor R High Mount Heat Exchanger Kit (AC21112301NA), both sold separately; a 2024+ truck with the intercooler upgrade needs an additional shutter motor relocation kit. Trucks with adaptive cruise control can add ADD's separate ACC relocation bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eModern plate steel design that fits tight to the front of the truck\u003c\/li\u003e\n\u003cli\u003e30-inch radius LED light bar mount on top of the bumper\u003c\/li\u003e\n\u003cli\u003e20-inch straight LED light bar mount in the center\u003c\/li\u003e\n\u003cli\u003e10-inch light bar mounts behind each side panel\u003c\/li\u003e\n\u003cli\u003eFits trucks with or without front parking sensors\u003c\/li\u003e\n\u003cli\u003eRetains OEM tow hooks\u003c\/li\u003e\n\u003cli\u003eHammer black powder coat, satin black aluminum panels\u003c\/li\u003e\n\u003cli\u003eShutter motor bracket included\u003c\/li\u003e\n\u003cli\u003eMade in America\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFitment: 2021-2026 Ford F-150 Raptor and 2023-2026 Ford F-150 Raptor R. Fitment confirmed against Addictive Desert Designs' published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/2021-raptor-honeybadger-front-6-6.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBumper Install Guide\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/db24b691297833b17d55751108d7905c.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (supplier copy)\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":67776417235243,"sku":"ADDF210211180103","price":2429.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/f210211180103_6b85a2c6-d7ab-4026-92b9-0cce6aa8f9a5.jpg?v=1794510191"},{"product_id":"addictive-desert-designs-honeybadger-front-bumper-w-top-hoop-2021-2026-ford-f-150-raptor-f210221180103","title":"Addictive Desert Designs HoneyBadger Front Bumper w\/ Top Hoop for 2021-2026 Ford F-150 Raptor, F-150 Raptor R F210221180103","description":"\u003cp\u003eThe Addictive Desert Designs HoneyBadger is a plate-steel front bumper for the 2021 and newer Ford F-150 Raptor and the Raptor R. This version includes the top hoop; ADD also sells the same bumper without it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt to follow the truck.\u003c\/strong\u003e The bumper tucks in tight to the front of the Raptor and follows its body lines, with sharp angles and a more aggressive stance. The steel is finished in hammer black powder coat and the aluminum accent panels in satin black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLighting where you need it.\u003c\/strong\u003e The top hoop carries a 30 in. radius LED light bar and partly shields it. A 20 in. light bar fits in a protected spot behind the HoneyBadger claw cutaways, and 10 in. light bars fit behind each side panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSensor and non-sensor trucks.\u003c\/strong\u003e If your 2021+ Raptor has the 801A High package, the front parking sensors install in the bumper. Trucks with the 800A Standard package get the supplied sensor plugs for the mount holes. A shutter motor bracket is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlan the extras.\u003c\/strong\u003e ADD lists this bumper as compatible with its Raptor Intercooler Kit (sold separately; it needs the shutter motor relocation kit) and the Raptor R High Mount Heat Exchanger Kit (sold separately). On 2024+ trucks the intercooler kit needs an additional shutter motor relocation kit. ADD also notes the bumper may block the factory front camera view, and recommends its Adaptive Cruise Control relocation bracket to keep ACC working.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eModern plate steel design that fits tight to the front of the truck\u003c\/li\u003e\n\u003cli\u003e20 in. straight LED mount in the center\u003c\/li\u003e\n\u003cli\u003e30 in. radius LED mount on top of the bumper\u003c\/li\u003e\n\u003cli\u003e10 in. light bar mounts behind each side panel\u003c\/li\u003e\n\u003cli\u003eFits sensor and non-sensor trucks\u003c\/li\u003e\n\u003cli\u003eHammer black steel with satin black aluminum panels\u003c\/li\u003e\n\u003cli\u003eFully bolt-on, made in America\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e 2021-2026 Ford F-150 Raptor and 2023 and newer Ford F-150 Raptor R. Fitment confirmed against Addictive Desert Designs' published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/2021-raptor-honeybadger-front-6-6.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBumper Install Guide\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/ADD-installguide-AC1305101NA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eACC Bracket Install Guide\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/db24b691297833b17d55751108d7905c.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (supplier copy)\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":67776417300779,"sku":"ADDF210221180103","price":2609.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/f210221180103_d4ac121b-93cf-4499-bb1f-474814f41533.jpg?v=1794510454"},{"product_id":"addictive-desert-designs-phantom-front-bumper-2021-2026-ford-f-150-raptor-f210263200103","title":"Addictive Desert Designs Phantom Front Bumper for 2021-2026 Ford F-150 Raptor, F-150 Raptor R F210263200103","description":"\u003cp\u003eThe Addictive Desert Designs Phantom is a low-profile front bumper for the third-generation Ford F-150 Raptor and the Raptor R, with a prerunner-inspired layout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlate steel, knife's edge look.\u003c\/strong\u003e Instead of traditional tube steel, the Phantom is built from plate steel with contours that mimic the look of trailing arms. The steel is finished in hammer black powder coat and the aluminum accent panels in satin black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFull-coverage skid plate.\u003c\/strong\u003e A lightweight 3\/16 in. aluminum skid plate protects the underside without adding excess weight, and its vented cutouts let air reach the intercooler. ADD notes the intercooler does not need to be moved for proper fitment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLighting options.\u003c\/strong\u003e A central 20 in. radius LED light bar mount sits in the bumper, and 10 in. SR light bars fit behind each side panel. The bumper has sensor mounts that keep the factory parking sensors working.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you install.\u003c\/strong\u003e ADD states an Adaptive Cruise Control relocation bracket is required for installation, and it also keeps ACC working. A shutter motor bracket ships with the bumper. The bumper is listed as compatible with ADD's Raptor Intercooler Kit (sold separately; it needs the shutter motor relocation kit, and 2024-2025 models need an additional one) and the Raptor R High Mount Heat Exchanger Kit (sold separately).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKnife's edge design with a low-profile fit\u003c\/li\u003e\n\u003cli\u003eFits a 20 in. radius LED light bar and two 10 in. SR LED light bars\u003c\/li\u003e\n\u003cli\u003ePlate steel construction\u003c\/li\u003e\n\u003cli\u003eFull-size aluminum skid plate with air vents\u003c\/li\u003e\n\u003cli\u003eRetains the OEM intercooler and parking sensors\u003c\/li\u003e\n\u003cli\u003eHammer black steel with satin black aluminum accent panels\u003c\/li\u003e\n\u003cli\u003eFully bolt-on, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e 2021-2026 Ford F-150 Raptor and 2023 and newer Ford F-150 Raptor R. Fitment confirmed against Addictive Desert Designs' published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/2021-raptor-phantom-front-installguide_c61be3b5-5a32-4601-b9a3-9af6dba3e182.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBumper Install Guide\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/ADD-installguide-AC1305101NA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eACC Bracket Install Guide\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/8ee898aba4a64cd119d4ac961922684c.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (supplier copy)\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":67776417399083,"sku":"ADDF210263200103","price":2429.08,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/3rd-gen-ford-f150-raptor-front-bumper-phantom-series-2.jpg?v=1794510498"},{"product_id":"addictive-desert-designs-pro-bolt-on-front-bumper-2021-2026-ford-f-150-raptor-f218102070103","title":"Addictive Desert Designs Pro Bolt-On Front Bumper for 2021-2026 Ford F-150 Raptor, F-150 Raptor R F218102070103","description":"\u003cp\u003eThe Addictive Desert Designs Pro Bolt-On is the slimmest-fitting front bumper in ADD's lineup for the 2021-2026 Ford F-150 Raptor and the Raptor R, designed in a prerunner style.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTube steel that hugs the truck.\u003c\/strong\u003e The main radius is .120 in. wall steel tube that follows the contours of the front end and sits flush with the grille and valance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKeeps the intercooler where it is.\u003c\/strong\u003e A CNC-cut 1\/8 in. aluminum skid plate is vented so air reaches the OEM intercooler, which stays in its original position. A shutter motor bracket is included with the bumper.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFlexible lighting.\u003c\/strong\u003e The universal light mount in the center takes up to six cube lights or a 20 in. radius LED light bar, protected by the lower tube, the skid plate and side steel plating. The optional ADD PRO Bolt-On Light Hoop, sold separately, adds mounting for up to four 6 in. round lights in the same low-profile style.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWinch-ready option.\u003c\/strong\u003e ADD also offers a winch conversion kit that lets this bumper accept a winch; it bolts to the truck's frame and sits behind the winch plate. It is selected as an option on ADD's page and is not part of this listing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlan the extras.\u003c\/strong\u003e ADD lists the bumper as compatible with its Raptor Intercooler Kit (sold separately; it needs the shutter motor relocation kit, and 2024-2025 models need an additional one) and the Raptor R High Mount Heat Exchanger Kit (sold separately).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFollows the contours of the front end with a low profile\u003c\/li\u003e\n\u003cli\u003eRetains the OEM intercooler location\u003c\/li\u003e\n\u003cli\u003eLight mounts for up to six cube lights or a 20 in. radius LED bar\u003c\/li\u003e\n\u003cli\u003e.120 in. wall steel tubing\u003c\/li\u003e\n\u003cli\u003eCNC-cut aluminum skid plate\u003c\/li\u003e\n\u003cli\u003eHammer black steel with satin black panels\u003c\/li\u003e\n\u003cli\u003eFully bolt-on, made in America\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e 2021-2026 Ford F-150 Raptor and 2023 and newer Ford F-150 Raptor R. Fitment confirmed against Addictive Desert Designs' published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/2021_pro_bolt_on_front_bumper-winchkit.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBumper, Winch Kit, and Light Hoop Install Guide\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/ADD-installguide-AC1305101NA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eACC Bracket Install Guide\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/3aaab3c76a54a4c2b5a934e135ea6e53.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (supplier copy)\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":67776417530155,"sku":"ADDF218102070103","price":2699.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/f218102070103.jpg?v=1794510515"},{"product_id":"addictive-desert-designs-bomber-front-bumper-rigid-w-3-rigid-360-mounts-2022-2026-ford-bronco-raptor-f230194130103","title":"Addictive Desert Designs Bomber Front Bumper (Rigid) w\/ 3 Rigid 360 Mounts for 2022-2026 Ford Bronco Raptor F230194130103","description":"\u003cp\u003eThe Bomber is a plate steel front bumper from Addictive Desert Designs for the sixth-generation Ford Bronco. This Rigid version carries three mounting points for 6-inch Rigid 360 lights.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTight fit.\u003c\/strong\u003e The bumper follows the body contours closely and improves the approach angle and clearance compared with the factory bumper.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLighting built in.\u003c\/strong\u003e A satin black aluminum panel at the center frames the three Rigid 360 mounts, and the side panels frame mounts for two cube lights.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKeeps the factory features.\u003c\/strong\u003e The OEM parking sensors are retained, and two heavily reinforced clevis mounts accept soft shackles for recovery. The OEM skid plate will fit with trimming, and ADD offers an optional 3\/16-inch vented aluminum skid plate plus an Adaptive Cruise Control relocation bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFinish.\u003c\/strong\u003e Hammer black powder coat on the steel, satin black on the aluminum panels. Fully bolt-on and made in America.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eModern plate steel design\u003c\/li\u003e\n\u003cli\u003eMounts for three 6-inch Rigid 360 lights\u003c\/li\u003e\n\u003cli\u003eSide mounts for two cube lights\u003c\/li\u003e\n\u003cli\u003eReinforced clevis mounts accept soft shackles\u003c\/li\u003e\n\u003cli\u003eRetains OEM parking sensors\u003c\/li\u003e\n\u003cli\u003eOEM skid plate fits with trimming; optional 3\/16-inch aluminum skid plate\u003c\/li\u003e\n\u003cli\u003eOptional adaptive cruise control bracket\u003c\/li\u003e\n\u003cli\u003eFully bolt-on, made in America\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFitment: Addictive Desert Designs lists this part for the Ford Bronco (2021-2026), which includes the Bronco Raptor (2022-2026); ADD names no Raptor exclusion. Fitment confirmed against Addictive Desert Designs' published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0627\/4508\/4140\/files\/2021-bronco-bomber-front-bumper-installation-instructions.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/37d4c571a8a5b18514db7cc2ef7193aa.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (supplier copy)\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eAll trims\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":67776417661227,"sku":"ADDF230194130103","price":1979.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/2021-2022-Bomber-Bronco-Front-Bumper-Rigid_88c54458-f242-4ceb-835c-5c2015ba410e.jpg?v=1794518341"},{"product_id":"addictive-desert-designs-rock-fighter-winch-front-bumper-2022-2026-ford-bronco-raptor-f260181060103","title":"Addictive Desert Designs Rock Fighter Winch Front Bumper for 2022-2026 Ford Bronco Raptor F260181060103","description":"\u003cp\u003eThe Addictive Desert Designs Rock Fighter is a winch-ready front bumper made specifically for the Ford Bronco Raptor, with high clearance and approach angles for rough terrain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShaped to the Raptor.\u003c\/strong\u003e The modern radius plate-steel design flows with the contours of the Raptor-style fender flares.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSkid plate included.\u003c\/strong\u003e A vented skid plate with louvers is part of the bumper, so air still reaches the intercooler.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRecovery ready.\u003c\/strong\u003e A standard winch mount is built in, along with two reinforced clevis mounts that accept soft shackles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLighting.\u003c\/strong\u003e A universal light mount in the center takes up to a 20 in. radius LED light bar or five cube lights, and two light mounts on top take round lights. The bumper retains the OEM parking sensors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCruise control.\u003c\/strong\u003e ADD's Adaptive Cruise Control relocation bracket is available separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eModern radius plate steel design\u003c\/li\u003e\n\u003cli\u003eUniversal light mount for a 20 in. radius light bar or five cube lights\u003c\/li\u003e\n\u003cli\u003eTwo light mounts on top for round lights\u003c\/li\u003e\n\u003cli\u003eVented skid plate with louvers for intercooler airflow\u003c\/li\u003e\n\u003cli\u003eStandard winch mount\u003c\/li\u003e\n\u003cli\u003eRetains OEM parking sensors\u003c\/li\u003e\n\u003cli\u003eReinforced clevis mounts that accept soft shackles\u003c\/li\u003e\n\u003cli\u003eFully bolt-on, made in America\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e 2022-2026 Ford Bronco Raptor. Fitment confirmed against Addictive Desert Designs' published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/2023-BroncoRaptor-RockFighter-Front-InstallGuide.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBumper Install Guide\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/2021-ford-bronco-cruise-control-install.pdf\" target=\"_blank\" rel=\"noopener\"\u003eACC Bracket Install Guide\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/4f3069aaa5964fc233d66887a34f3981.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (supplier copy)\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":67776417792299,"sku":"ADDF260181060103","price":2339.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/bronco-raptor-off-road-bumper-1.jpg?v=1794510527"},{"product_id":"addictive-desert-designs-phantom-front-bumper-2024-ford-ranger-raptor-f720265070103","title":"Addictive Desert Designs Phantom Front Bumper for 2024+ Ford Ranger Raptor F720265070103","description":"\u003cp\u003eThe Addictive Desert Designs Phantom is a full-size front bumper made for the 2024+ Ford Ranger Raptor. Its knife-edge shape follows the factory lines of the truck and keeps a low profile, and it is built from steel with an aluminum skid plate included in the box.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLighting options.\u003c\/strong\u003e The integrated center mount takes either one 20-inch radius LED light bar or six cube lights. The side wings each have a mount for a 10-inch SR LED light bar, so up to two can be fitted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUnderbody protection.\u003c\/strong\u003e The included 3\/16-inch aluminum skid plate has air vents that let the intercooler and radiator breathe. Because it is aluminum, ADD notes it will not rust.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKeeps factory equipment.\u003c\/strong\u003e The bumper retains the OEM parking sensors, recovery points and intercooler. To keep adaptive cruise control working, ADD requires its separate 2024+ Ranger Raptor Adaptive Cruise Control Relocation Kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFinish and build.\u003c\/strong\u003e A 2-stage hammer black powder coat covers the steel, with satin black powder coated aluminum accent panels. It is designed and manufactured in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePhantom full-size front bumper for the 2024+ Ranger Raptor\u003c\/li\u003e\n\u003cli\u003eKnife-edge, low-profile design\u003c\/li\u003e\n\u003cli\u003eCenter mount for one 20-inch radius LED light bar or six cube lights\u003c\/li\u003e\n\u003cli\u003eSide wing mounts for two 10-inch SR LED light bars\u003c\/li\u003e\n\u003cli\u003eIncluded 3\/16-inch aluminum skid plate with air vents\u003c\/li\u003e\n\u003cli\u003eRetains OEM intercooler, parking sensors and recovery points\u003c\/li\u003e\n\u003cli\u003eSteel construction with 2-stage hammer black powder coat\u003c\/li\u003e\n\u003cli\u003eSatin black powder coated aluminum accent panels\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProp 65.\u003c\/strong\u003e WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003eFitment: 2024+ Ford Ranger Raptor. Fitment confirmed against Addictive Desert Designs' published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/ADD_installguide_F720265070103_UPDATED_10.23.2024.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBumper Install Guide\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/b2a55d81e674c8eb72723d830ab0be1f.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (supplier copy)\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2024+\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":67776421986603,"sku":"ADDF720265070103","price":2159.08,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/Ford-Ranger-Raptor-Phantom-Front-Bumper-Installed-3.jpg?v=1794510456"},{"product_id":"addictive-desert-designs-add-pro-bolt-on-rear-bumper-2017-2020-ford-f-150-raptor-r118571280103","title":"Addictive Desert Designs ADD PRO Bolt-On Rear Bumper for 2017-2020 Ford F-150 Raptor R118571280103","description":"\u003cp\u003eThe ADD PRO Bolt-On Rear Bumper replaces the stock rear bumper on the 2017-2020 Ford F-150 Raptor with a slim, tube-style design that echoes ADD's PRO front bumper. It is sold as a complete bolt-on bumper, finished in hammer black powder coat with satin black panels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTube steel construction.\u003c\/strong\u003e The frame is built from .120 in. wall steel tubing, giving the back of the truck a tough barrier without the bulk of a plate-style bumper. An aluminum top plate adds a clean, finished look.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKeeps the hitch usable.\u003c\/strong\u003e Addictive Desert Designs designed the bumper to retain the factory hitch functionality, so towing setups that work today keep working after the swap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRoom for extra lighting.\u003c\/strong\u003e The bumper includes mounts for two rear-facing cube lights, and the layout includes cutouts for the backup sensors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e.120 in. wall steel tubing frame\u003c\/li\u003e\n\u003cli\u003eAluminum top plate\u003c\/li\u003e\n\u003cli\u003eMounts for two rear-facing cube lights\u003c\/li\u003e\n\u003cli\u003eBackup sensor cutouts\u003c\/li\u003e\n\u003cli\u003eRetains the OEM hitch functionality\u003c\/li\u003e\n\u003cli\u003eSatin black powder coat panel finish\u003c\/li\u003e\n\u003cli\u003eHammer black powder coat finish\u003c\/li\u003e\n\u003cli\u003eMade in America\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProp 65.\u003c\/strong\u003e WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003eFitment: 2017-2020 Ford F-150 Raptor. Fitment confirmed against Addictive Desert Designs' published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0627\/4508\/4140\/files\/ADD-2017-Current-Ford-Raptor-ADD-PRO-Bolt-On-Rear-Bumper-Installation-Instructions.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (ADD)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/049e78ac9ab85b57812a0a432b752d24.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (supplier copy)\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":67776425034027,"sku":"ADDR118571280103","price":2069.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/2017-2019-Ford-Raptor-rear-bumper.jpg?v=1794510995"},{"product_id":"addictive-desert-designs-rock-fighter-rear-bumper-2021-2026-ford-f-150-raptor-r210121090103","title":"Addictive Desert Designs Rock Fighter Rear Bumper for 2021-2026 Ford F-150 Raptor \u0026 Raptor R R210121090103","description":"\u003cp\u003eThe Rock Fighter Rear Bumper from Addictive Desert Designs gives the third-generation Ford F-150 Raptor a low-profile steel bumper that guards the tailgate and rear body from rocks and brush on the trail.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLow-profile protection.\u003c\/strong\u003e The design follows the lines of the Raptor and puts a solid steel barrier between obstacles and the back of the truck without adding a lot of visual bulk.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKeeps the factory features.\u003c\/strong\u003e ADD built the bumper to retain the OEM parking sensors, license plate lights, trailer plug and wiring, and all recovery points, so nothing on the truck has to be given up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLight mounts on the wings.\u003c\/strong\u003e A pair of side wing mounts accepts cube lights for extra light behind the truck in low-light conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFinish and install.\u003c\/strong\u003e Made from steel with a 2-stage hammer black powder coat, the bumper installs fully bolt-on and is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLow-profile steel design\u003c\/li\u003e\n\u003cli\u003ePair of side cube light mounts\u003c\/li\u003e\n\u003cli\u003eRetains OEM parking sensors\u003c\/li\u003e\n\u003cli\u003eRetains OEM license plate lights\u003c\/li\u003e\n\u003cli\u003eRetains OEM trailer plug and wiring\u003c\/li\u003e\n\u003cli\u003eRetains OEM recovery points\u003c\/li\u003e\n\u003cli\u003e2-stage hammer black powder coat finish\u003c\/li\u003e\n\u003cli\u003eFully bolt-on installation\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProp 65.\u003c\/strong\u003e WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003eFitment: Ford F-150 Raptor 2021-2026 and F-150 Raptor R 2023-2026. Fitment confirmed against Addictive Desert Designs' published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/ADD-installguide-R210121090103.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (ADD)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/856e732213a48c105fa08572b4c69ce5.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (supplier copy)\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":67776425132331,"sku":"ADDR210121090103","price":1619.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/2022_Ford-F-150-Raptor-Rock-Fighter-Rear-Bumper-7.jpg?v=1794511010"},{"product_id":"addictive-desert-designs-honeybadger-rear-bumper-2021-2026-ford-f-150-raptor-r210151430103","title":"Addictive Desert Designs HoneyBadger Rear Bumper for 2021-2026 Ford F-150 Raptor \u0026 Raptor R R210151430103","description":"\u003cp\u003eThe HoneyBadger Rear Bumper from Addictive Desert Designs is a plate steel, box-design replacement for the factory rear bumper on the third-generation Ford F-150 Raptor and Raptor R. ADD shaped it to follow the Raptor's dovetail rear body lines closely.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlate steel box design.\u003c\/strong\u003e The modern box construction offers more protection than the factory piece, while the stock dual exhaust and tow hooks still sit comfortably below the bumper.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSensors stay working.\u003c\/strong\u003e Sensor cutouts keep the parking and backup warning system fully functional, and the OEM license plate lights and tow wiring plug or harness are retained.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRecovery and lighting.\u003c\/strong\u003e Two reinforced 1 in. clevis mounts accept soft shackles for recovery. Near each end, 10 in. LED light bar mounts sit behind satin black aluminum panels with badger claw cutouts, and two cube light mounts sit on each side of the center.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrailer wiring.\u003c\/strong\u003e A factory or aftermarket trailer wiring harness can be mounted to the underside of the bumper near the hitch. The bumper installs fully bolt-on and is made in America.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePlate steel box design\u003c\/li\u003e\n\u003cli\u003eCompatible with factory backup sensors\u003c\/li\u003e\n\u003cli\u003e10 in. LED light bar mounts behind side accent panels\u003c\/li\u003e\n\u003cli\u003eCube light mounts for additional lighting\u003c\/li\u003e\n\u003cli\u003eReinforced 1 in. clevis mounts accept soft shackles\u003c\/li\u003e\n\u003cli\u003eRetains OEM license plate lights, tow hooks and tow wiring plug or harness\u003c\/li\u003e\n\u003cli\u003eHammer black powder coat with satin black panels\u003c\/li\u003e\n\u003cli\u003eMade in America\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProp 65.\u003c\/strong\u003e WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003eFitment: Ford F-150 Raptor 2021-2026 and F-150 Raptor R 2023-2026. Fitment confirmed against Addictive Desert Designs' published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0627\/4508\/4140\/files\/2021-ford-raptor-honeybadger-rear-bumper-install-guide.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (ADD)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/61dfd7cc6fa6880879cbe48c727304aa.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (supplier copy)\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":67776425263403,"sku":"ADDR210151430103","price":2249.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/r210151430103.jpg?v=1794511028"},{"product_id":"addictive-desert-designs-phantom-rear-bumper-2021-2026-ford-f-150-raptor-r210191190103","title":"Addictive Desert Designs Phantom Rear Bumper for 2021-2026 Ford F-150 Raptor \u0026 Raptor R R210191190103","description":"\u003cp\u003eThe Phantom Rear Bumper from Addictive Desert Designs is a plate steel upgrade for the third-generation Ford F-150 Raptor and Raptor R, built in a modern box structure that protects more than the factory bumper.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHammerhead styling.\u003c\/strong\u003e Sleek wings flare out in a bold hammerhead shape that pairs with the Raptor's rear bodywork.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFactory features retained.\u003c\/strong\u003e Sensor cutouts keep the parking and backup warning system working. The factory dual exhaust and tow hooks fit comfortably below the bumper, and the OEM license plate lights and tow wiring plug or harness are retained.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLighting built in.\u003c\/strong\u003e Mounting points for two 10 in. single-row LED light bars sit behind satin black aluminum accent panels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eComplete and bolt-on.\u003c\/strong\u003e The bumper comes with all hardware, installs 100% bolt-on and is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePlate steel box design\u003c\/li\u003e\n\u003cli\u003e10 in. single row light bar mounts behind side accent panels\u003c\/li\u003e\n\u003cli\u003eParking sensor cutouts, compatible with factory backup sensors\u003c\/li\u003e\n\u003cli\u003eRetains OEM license plate lights, tow hooks and tow wiring plug or harness\u003c\/li\u003e\n\u003cli\u003eHammer black powder coat finish\u003c\/li\u003e\n\u003cli\u003eAll hardware included\u003c\/li\u003e\n\u003cli\u003eMade in America\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProp 65.\u003c\/strong\u003e WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003eFitment: Ford F-150 Raptor 2021-2026 and F-150 Raptor R 2023-2026. Fitment confirmed against Addictive Desert Designs' published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0627\/4508\/4140\/files\/2021Raptor_Phantom_rear_installguide.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (ADD)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/09d5aa8d7f4d7a0b23e2452200689005.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (supplier copy)\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":67776425361707,"sku":"ADDR210191190103","price":1619.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/DSC04119.jpg?v=1794511074"},{"product_id":"addictive-desert-designs-add-pro-bolt-on-rear-bumper-2021-2026-ford-f-150-raptor-r218571280103","title":"Addictive Desert Designs ADD Pro Bolt-On Rear Bumper for 2021-2026 Ford F-150 Raptor \u0026 Raptor R R218571280103","description":"\u003cp\u003eThe ADD Pro Bolt-On Rear Bumper brings the slim, prerunner look of ADD's front Pro Bolt-On bumper to the back of the third-generation Ford F-150 Raptor and Raptor R.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTube steel strength.\u003c\/strong\u003e The bumper is constructed from .120 in. wall steel tubing for durable protection at the rear of the truck, and the structural steel plates are finished in hammer black powder coat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCNC aluminum top plate.\u003c\/strong\u003e The top plate is CNC cut aluminum with a satin black powder coat finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLighting options.\u003c\/strong\u003e Pod light mounts toward both ends take 3 in. LED cube lights. ADD notes these can be wired to the reverse lights or to a separate harness for supplemental lighting off-road.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFactory features kept.\u003c\/strong\u003e The bumper retains the OEM reverse sensors, license plate lights, hitch and trailer harness, and tow hooks. It installs fully bolt-on and is made in America.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e.120 in. wall steel tubing construction\u003c\/li\u003e\n\u003cli\u003eCNC cut aluminum top plate\u003c\/li\u003e\n\u003cli\u003eMounts for two 3 in. LED cube lights\u003c\/li\u003e\n\u003cli\u003eRetains OEM reverse sensors and backup sensor cutouts\u003c\/li\u003e\n\u003cli\u003eRetains OEM hitch and trailer harness functionality\u003c\/li\u003e\n\u003cli\u003eRetains OEM tow hooks and license plate lights\u003c\/li\u003e\n\u003cli\u003eSatin black powder coat panel finish\u003c\/li\u003e\n\u003cli\u003eHammer black powder coat finish\u003c\/li\u003e\n\u003cli\u003eMade in America\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProp 65.\u003c\/strong\u003e WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003eFitment: Ford F-150 Raptor 2021-2026 and F-150 Raptor R 2023-2026. Fitment confirmed against Addictive Desert Designs' published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0627\/4508\/4140\/files\/2021-raptor-pro-bolt-on-rear-bumper-install-guide.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (ADD)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/e074c0c419eeccc346334400859273ba.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (supplier copy)\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":67776425492779,"sku":"ADDR218571280103","price":2069.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/r218571280103-3.jpg?v=1794511091"},{"product_id":"addictive-desert-designs-bomber-rear-bumper-2022-2026-ford-bronco-raptor-r230141090103","title":"Addictive Desert Designs Bomber Rear Bumper for 2022-2026 Ford Bronco Raptor R230141090103","description":"\u003cp\u003eThe Bomber rear bumper from Addictive Desert Designs is a low-profile, slim-fitting replacement that follows the body lines of the Ford Bronco.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSteel and aluminum.\u003c\/strong\u003e Modern plate steel in a hammer black powder coat, with lightweight aluminum alloy panels in satin black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRecovery ready.\u003c\/strong\u003e Two heavily reinforced clevis mounts accept soft shackles. The bumper sits just above the OEM tow hooks so they can still be used as intended.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKeeps the sensors.\u003c\/strong\u003e Cutouts let the parking sensor system keep working. The included license plate bracket moves the plate above the bumper, bolting to the spare tire carrier mounting points, and the OEM plate light can be installed in the new spot.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExtra lighting.\u003c\/strong\u003e Two universal cube light mounts sit toward each end for supplemental rear lighting. Fully bolt-on and made in America.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eModern plate steel design\u003c\/li\u003e\n\u003cli\u003eSide mounts for two cube lights\u003c\/li\u003e\n\u003cli\u003eReinforced clevis mounts accept soft shackles\u003c\/li\u003e\n\u003cli\u003eRetains OEM tow hooks\u003c\/li\u003e\n\u003cli\u003eRetains OEM parking sensors\u003c\/li\u003e\n\u003cli\u003eFully bolt-on, made in America\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFitment: Addictive Desert Designs lists this part for the Ford Bronco (2021-2026), which includes the Bronco Raptor (2022-2026); ADD names no Raptor exclusion. Fitment confirmed against Addictive Desert Designs' published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0627\/4508\/4140\/files\/2021-bronco-bomber-rear-bumper_1.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/d9372cbff24e9b84fe88c0b3cf9260c2.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (supplier copy)\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eAll trims\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":67776425787691,"sku":"ADDR230141090103","price":1709.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/2021-2022-Bomber-Bronco-Rear-Bumper.jpg?v=1794518364"},{"product_id":"addictive-desert-designs-bomber-rear-bumper-2022-2026-ford-bronco-raptor-r260141090103","title":"Addictive Desert Designs Bomber Rear Bumper for 2022-2026 Ford Bronco Raptor R260141090103","description":"\u003cp\u003eThe Bomber Rear Bumper from Addictive Desert Designs is a slim, low-profile rear bumper made for the Ford Bronco Raptor. It follows the body lines of the truck while adding recovery points and light mounts, and it leaves the factory sensors and tow hooks working.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlate steel construction.\u003c\/strong\u003e The main structure is modern plate steel finished in hammer black powder coat. Lightweight aluminum alloy panels are finished in satin black powder coat for contrast.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRecovery points.\u003c\/strong\u003e Two heavily reinforced clevis mounts accept soft shackles, giving you a dependable place to hook up on the trail.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLight mounts and plate relocation.\u003c\/strong\u003e Two universal mounting points toward the ends of the bumper take cube lights for added light behind the truck. A license plate bracket is included; it moves the plate above the bumper and bolts into the same mounting points as the spare tire carrier.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKeeps factory features.\u003c\/strong\u003e Cutouts let the parking sensors keep working, and the bumper sits above the OEM tow hooks so they can still be used as intended.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eModern plate steel design\u003c\/li\u003e\n\u003cli\u003eHammer black powder coat finish\u003c\/li\u003e\n\u003cli\u003eSatin black powder coat aluminum panels\u003c\/li\u003e\n\u003cli\u003eSide mounts for 2 cube lights\u003c\/li\u003e\n\u003cli\u003eReinforced clevis mounts accept soft shackles\u003c\/li\u003e\n\u003cli\u003eParking sensor cutouts\u003c\/li\u003e\n\u003cli\u003eRetains OEM tow hooks\u003c\/li\u003e\n\u003cli\u003eLicense plate bracket included\u003c\/li\u003e\n\u003cli\u003eFully bolt-on\u003c\/li\u003e\n\u003cli\u003eMade in America\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFitment: 2022-2026 Ford Bronco Raptor. Fitment confirmed against Addictive Desert Designs' published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/2023-BroncoRaptor-Bomber-Rear-InstallGuide_UPDATED_10.23.2024.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstall Instructions\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/d304da8ae207d08781db1dc01e49cda9.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (supplier copy)\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":67776425918763,"sku":"ADDR260141090103","price":1619.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/2022-2023-Ford-Bronco-Raptor-Bomber-Rear-Bumper.jpg?v=1794510917"},{"product_id":"addictive-desert-designs-phantom-rear-bumper-2024-ford-ranger-raptor-r720191280103","title":"Addictive Desert Designs Phantom Rear Bumper for 2024+ Ford Ranger Raptor R720191280103","description":"\u003cp\u003eThe Phantom Rear Bumper from Addictive Desert Designs is a trim, knife's-edge replacement bumper made for the 2024+ Ford Ranger Raptor. It improves ground clearance at the back of the truck, gives it a more aggressive stance, and keeps the factory rear hardware in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSlim, low-profile design.\u003c\/strong\u003e The knife's-edge shape and satin black accent panels follow the factory lines of the Raptor for a clean, close-fitting look.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for rough use.\u003c\/strong\u003e The bumper is made from steel with a durable two-stage hammer black powder coat, and the accent panels are powder coated aluminum in satin black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRoom for extra light.\u003c\/strong\u003e Toward each side of the bumper you can mount a pair of 3 in. cube lights for supplemental lighting behind the truck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKeeps the factory features.\u003c\/strong\u003e The OEM recovery points, trailer plug and wiring, parking sensors, and license plate lights all stay in service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKnife's-edge, low-profile design\u003c\/li\u003e\n\u003cli\u003eMounts for (2) 3 in. cube lights\u003c\/li\u003e\n\u003cli\u003eRetains OEM recovery points and trailer plug and wiring\u003c\/li\u003e\n\u003cli\u003eRetains OEM parking sensors and license plate lights\u003c\/li\u003e\n\u003cli\u003e2-stage hammer black powder coat finish\u003c\/li\u003e\n\u003cli\u003eSatin black powder coated aluminum accent panels\u003c\/li\u003e\n\u003cli\u003eFully bolt-on\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65.\u003c\/strong\u003e WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003eFitment: 2024+ Ford Ranger Raptor. Fitment confirmed against Addictive Desert Designs' published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/ADD_installguide_R720191280103_0eefcecc-8f19-4f05-aa67-a637c5cb2139.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstall Instructions\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/9119a14030563677cbc39ff806508bab.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (supplier copy)\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2024+\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":67776426737963,"sku":"ADDR720191280103","price":1529.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/2024_Ford-Ranger-Raptor-Phantom-Rear-Bumper-2.jpg?v=1794510956"},{"product_id":"putco-18-20-ford-f-150-hex-shield-black-powder-coated-bumper-grille-inserts","title":"Putco 18-20 Ford F-150 - Hex Shield - Black Powder Coated Bumper Grille Inserts","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003ePutco Bumper Grille Inserts are a great economical choice to add style and protection to your vehicle. Our Bumper Grille Inserts are CNC laser cut to be vehicle application specific to ensure a precision fit. They are constructed from high-quality 26-gauge, T-304 stainless steel for extreme durability against the elements. Available in four different styles, hex pattern, bar, diamond, and punch styles. All available in two different finishes - bright polished and a black textured powder-coat finish. Putco Bumper Grille Inserts are CNC laser cut for a precision fit and are vehicle application-specific.\u003c\/p\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/751461a997536de75018e6021cec4cee.PDF\"\u003eWarranty\u003c\/a\u003e\u003cbr\u003e\u003cul\u003e\u003cli\u003eAvailable In Polished Stainless And Black Powder Coat Finish\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eKing Ranch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eLariat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003ePlatinum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003ePolice Responder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eSSV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eXL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eXLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Putco","offers":[{"title":"Default Title","offer_id":67781511905579,"sku":"PUT83161","price":106.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/506c327860a25157bc7e3ab55a61752a.jpg?v=1792149323"},{"product_id":"westin-09-14-ford-f-150-hdx-modular-grille-guard-black","title":"Westin 09-14 Ford F-150 HDX Modular Grille Guard - Black","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eWestin Automotive Product's new HDX Modular Grille Guards deliver bold styling and heavy-duty front-end protection. The innovative 3-piece design has proven its strength on emergency responder vehicles in a wide variety of high stress environments. Each application is engineered with strategically placed gusseting and reinforcement to provide superior structural rigidity that eliminates unwanted vibrations. The uprights feature durable 2-3\/4in. wide rubber push pad strips for added coverage. With a heavy-duty frame mount system and wraparound wings made of massive 2in. diameter high-strength tube, these grille guards deliver complete front-end protection. Thanks to their modular construction, all HDX Modular Grille Guards are packaged and shipped via parcel post, providing a significant savings over LTL shipping. The HDX Modular Grille Guard features a durable polished stainless steel or black powder coat finish with an electrostatic base coat, providing long lasting corrosion protection from the elements. Mount kit and hardware included for a complete professional installation, and every HDX Modular Grille Guard is backed by a 3-year warranty.\u003c\/p\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/c10594cd856250afb4208531111d3c2c.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e1 1\/4\" tube for support wings - On some applications\u003c\/li\u003e\n\u003cli\u003eSet of 2 optional light clamps - sold separately\u003c\/li\u003e\n\u003cli\u003eHeavy Duty 2 3\/4 in. Wide Upright Rubber Strips\u003c\/li\u003e\n\u003cli\u003e1 1\/4 in. Tube For Support Wings On Some Apps\u003c\/li\u003e\n\u003cli\u003e3-piece with bolt on headlight guards\u003c\/li\u003e\n\u003cli\u003e2 in. Tube Full Wraparound Wings\u003c\/li\u003e\n\u003cli\u003eMount Kit And Hardware Included\u003c\/li\u003e\n\u003cli\u003e2\" tube full wrap-around wings\u003c\/li\u003e\n\u003cli\u003e1 Piece Solid Construction\u003c\/li\u003e\n\u003cli\u003eSensor Relocator Available\u003c\/li\u003e\n\u003cli\u003eFull Punch Plate Grille\u003c\/li\u003e\n\u003cli\u003e3 Year Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2014\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eFX2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009-2014\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eFX4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2012\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eHarley-Davidson Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009-2014\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eKing Ranch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009-2014\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eLariat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eLariat Limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013-2014\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009-2014\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003ePlatinum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009-2014\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eSTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2014\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eSVT Raptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009-2014\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eXL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009-2014\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eXLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Westin","offers":[{"title":"Default Title","offer_id":67784361050411,"sku":"WES57-22505","price":917.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/5ca78340449241dddd2626b503f2c1feL.jpg?v=1792163957"},{"product_id":"westin-2015-2020-f-150-excl-w-sensors-hdx-modular-grille-guard-black","title":"Westin 2015-2020 F-150 (Excl. w\/Sensors) HDX Modular Grille Guard - Black","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eWestin Automotive Product's new HDX Modular Grille Guards deliver bold styling and heavy-duty front-end protection. The innovative 3-piece design has proven its strength on emergency responder vehicles in a wide variety of high stress environments. Each application is engineered with strategically placed gusseting and reinforcement to provide superior structural rigidity that eliminates unwanted vibrations. The uprights feature durable 2-3\/4in. wide rubber push pad strips for added coverage. With a heavy-duty frame mount system and wraparound wings made of massive 2in. diameter high-strength tube, these grille guards deliver complete front-end protection. Thanks to their modular construction, all HDX Modular Grille Guards are packaged and shipped via parcel post, providing a significant savings over LTL shipping. The HDX Modular Grille Guard features a durable polished stainless steel or black powder coat finish with an electrostatic base coat, providing long lasting corrosion protection from the elements. Mount kit and hardware included for a complete professional installation, and every HDX Modular Grille Guard is backed by a 3-year warranty.\u003c\/p\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/92b148365c5abfaae73b52cc80718640.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e1 1\/4\" tube for support wings - On some applications\u003c\/li\u003e\n\u003cli\u003eSet of 2 optional light clamps - sold separately\u003c\/li\u003e\n\u003cli\u003eHeavy Duty 2 3\/4 in. Wide Upright Rubber Strips\u003c\/li\u003e\n\u003cli\u003e1 1\/4 in. Tube For Support Wings On Some Apps\u003c\/li\u003e\n\u003cli\u003e3-piece with bolt on headlight guards\u003c\/li\u003e\n\u003cli\u003e2 in. Tube Full Wraparound Wings\u003c\/li\u003e\n\u003cli\u003eMount Kit And Hardware Included\u003c\/li\u003e\n\u003cli\u003e2\" tube full wrap-around wings\u003c\/li\u003e\n\u003cli\u003e1 Piece Solid Construction\u003c\/li\u003e\n\u003cli\u003eSensor Relocator Available\u003c\/li\u003e\n\u003cli\u003eFull Punch Plate Grille\u003c\/li\u003e\n\u003cli\u003e3 Year Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eKing Ranch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eLariat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003ePlatinum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003ePolice Responder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eSSV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eXL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eXLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Westin","offers":[{"title":"Default Title","offer_id":67784361640235,"sku":"WES57-23935","price":917.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/c55ba166ed6761a1b2adb2c9eae69f25L.jpg?v=1792163960"},{"product_id":"westin-21-22-ford-f-150-hdx-modular-grille-guard-black","title":"Westin 21-22 Ford F-150 HDX Modular Grille Guard - Black","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eWestin Automotive Product's new HDX Modular Grille Guards deliver bold styling and heavy-duty front-end protection. The innovative 3-piece design has proven its strength on emergency responder vehicles in a wide variety of high stress environments. Each application is engineered with strategically placed gusseting and reinforcement to provide superior structural rigidity that eliminates unwanted vibrations. The uprights feature durable 2-3\/4in. wide rubber push pad strips for added coverage. With a heavy-duty frame mount system and wraparound wings made of massive 2in. diameter high-strength tube, these grille guards deliver complete front-end protection. Thanks to their modular construction, all HDX Modular Grille Guards are packaged and shipped via parcel post, providing a significant savings over LTL shipping. The HDX Modular Grille Guard features a durable polished stainless steel or black powder coat finish with an electrostatic base coat, providing long lasting corrosion protection from the elements. Mount kit and hardware included for a complete professional installation, and every HDX Modular Grille Guard is backed by a 3-year warranty.\u003c\/p\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/973cde39b2e3f9749457df022eeb4817.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eHeavy duty 2 3\/4 in. wide upright rubber strips give an added barrier of protection\u003c\/li\u003e\n\u003cli\u003e2 in. tube full wraparound wings provide superior strength and protection\u003c\/li\u003e\n\u003cli\u003eMount kit and hardware included for a complete professional installation\u003c\/li\u003e\n\u003cli\u003eElectrostatic base coat provides long lasting corrosion protection\u003c\/li\u003e\n\u003cli\u003eFull punch plate grille delivers total front-end protection\u003c\/li\u003e\n\u003cli\u003e1-1\/4 in. tube wing supports enhance structural rigidity\u003c\/li\u003e\n\u003cli\u003eSet of 2 optional light clamps - sold separately\u003c\/li\u003e\n\u003cli\u003eHeavy Duty 2 3\/4 in. Wide Upright Rubber Strips\u003c\/li\u003e\n\u003cli\u003e1 1\/4 in. Tube For Support Wings On Some Apps\u003c\/li\u003e\n\u003cli\u003e3-piece with bolt on headlight guards\u003c\/li\u003e\n\u003cli\u003e2 in. Tube Full Wraparound Wings\u003c\/li\u003e\n\u003cli\u003eMount Kit And Hardware Included\u003c\/li\u003e\n\u003cli\u003e1 Piece Solid Construction\u003c\/li\u003e\n\u003cli\u003eSensor Relocator Available\u003c\/li\u003e\n\u003cli\u003eFull Punch Plate Grille\u003c\/li\u003e\n\u003cli\u003e3 Year Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eKing Ranch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eLariat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2023\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2023\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003ePlatinum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003ePolice Responder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eSSV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2024\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eSTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eTremor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eXL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eXLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Westin","offers":[{"title":"Default Title","offer_id":67784362328363,"sku":"WES57-24065","price":917.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/7802a4f26e91f65ac42bf1de2d6b2ff4L.jpg?v=1792163964"},{"product_id":"westin-21-23-ford-bronco-excl-bronco-sportxts-front-bumper-brush-guard-for-oem-bumper-tex-black","title":"Westin 21-23 Ford Bronco (Excl. Bronco Sport)XTS Front Bumper Brush Guard for OEM Bumper - Tex Black","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe XTS Brush Guard from Westin is an attractive, front end upgrade for your OE steel Modular Performance front bumper. It features 2in. diameter tubing for maximum durability and constructed of 10-gauge steel uprights for strength and style. The XTS Brush Guard provides a variety of optional light mounting center bars, completing your vehicle's upgrade with round or square LED light kit with Westin auxiliary lights (sold separately). The XTS Brush Guard has a durable textured black powder coat finish with an e-coated base coat, providing long lasting corrosion protection from the elements, and is backed by a 3-year warranty. Includes all necessary mounting hardware for a hassle-free installation. The XTS Brush Guard is the perfect choice for Ford Bronco owners.\u003c\/p\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/35c96de4f3ecf2bc0cd55631aca62826.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/6ef54cd94b3bca29e0a63b382b481971.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eOptional round or square LED light kit with Westin auxiliary lights available (sold separately)\u003c\/li\u003e\n\u003cli\u003eElectrostatic base coat provides long lasting corrosion protection\u003c\/li\u003e\n\u003cli\u003eWraparound Brush Guards Protects Headlights and Grill From Damage\u003c\/li\u003e\n\u003cli\u003eElectotastic Base Coat Provides Long Lasting Corrosion Protection\u003c\/li\u003e\n\u003cli\u003eConstructed of 10 Gauge Steel Uprights for Strength and Style\u003c\/li\u003e\n\u003cli\u003eConstructed of 10-gauge steel uprights for strength and style\u003c\/li\u003e\n\u003cli\u003eDesigned for OE Heavy Duty Modular Performance front bumper\u003c\/li\u003e\n\u003cli\u003eOptional LED Light Kit w\/Westin Auxilary Lights Available\u003c\/li\u003e\n\u003cli\u003eWraparound brush guards protects headlights from damage\u003c\/li\u003e\n\u003cli\u003eClears most winches up to 12,000 lbs. capacity\u003c\/li\u003e\n\u003cli\u003eClears Most Winches Up To 12000 lbs. Capacity\u003c\/li\u003e\n\u003cli\u003eBolt-on installation - no drilling required\u003c\/li\u003e\n\u003cli\u003e2\" diameter tubing for maximum durability\u003c\/li\u003e\n\u003cli\u003e2 in. Diameter Tubing For Max Durability\u003c\/li\u003e\n\u003cli\u003eBolt On Installation; No Drill Required\u003c\/li\u003e\n\u003cli\u003eHardware And Mounting Brackets Included\u003c\/li\u003e\n\u003cli\u003eOptional Light Mounting Center Bars\u003c\/li\u003e\n\u003cli\u003eCompatible with all factory sensors\u003c\/li\u003e\n\u003cli\u003eAvailable In Textured Black Finish\u003c\/li\u003e\n\u003cli\u003eBolt-on design using factory holes\u003c\/li\u003e\n\u003cli\u003eCompatible w\/All Factory Sensors\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eBadlands\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2023,2025\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eBig Bend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2024\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eBlack Diamond\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2024\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eEverglades\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eFirst Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eHeritage Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eHeritage Limited Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eOuter Banks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2025\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eStroppe Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2024\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eWildtrak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Westin","offers":[{"title":"Default Title","offer_id":67784365998379,"sku":"WES59-751255","price":528.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/377241aa8bcb6de9d8d7b6f712df27e2L.jpg?v=1792163988"},{"product_id":"addictive-desert-designs-stealth-fighter-rear-bumper-2-cube-lights-hammer-black-2021-ford-f-150-raptor-raptor-r-r210081090103","title":"Addictive Desert Designs Stealth Fighter Rear Bumper with 2 Cube Lights, Hammer Black for 2021+ Ford F-150 Raptor \u0026 Raptor R R210081090103","description":"\u003cp\u003eThe Stealth Fighter Rear Bumper from Addictive Desert Designs is one of the brand's slimmest bumpers, made for the 2021+ Ford F-150 Raptor and Raptor R. It follows the body lines of the truck and suits the factory dovetail styling. This version comes in hammer black with two cube lights.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSlim and strong.\u003c\/strong\u003e Modern radius plate steel gives the bumper more protection than the factory rear bumper while measuring the same length from the tailgate. Recessed satin black powder coated aluminum panels cut weight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLight mounts.\u003c\/strong\u003e Behind each panel are mounting points for rear-facing LED cube lights, handy for lighting up the bed in low light. Two integrated license plate lights come with the bumper.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKeeps the factory hardware.\u003c\/strong\u003e The bumper retains the OEM tow hitch, tow hooks, and dual exhaust, and sensor cutouts let the factory parking sensors keep working.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eModern radius plate steel design\u003c\/li\u003e\n\u003cli\u003eComplements the factory dovetail style\u003c\/li\u003e\n\u003cli\u003e2 universal cube light mounts\u003c\/li\u003e\n\u003cli\u003eIntegrated license plate lights\u003c\/li\u003e\n\u003cli\u003eReinforced clevis mounts accept soft shackles\u003c\/li\u003e\n\u003cli\u003eRetains OEM tow hooks, tow hitch, and dual exhaust\u003c\/li\u003e\n\u003cli\u003eRetains OEM parking sensors\u003c\/li\u003e\n\u003cli\u003eBumper color: hammer black; panel color: satin black\u003c\/li\u003e\n\u003cli\u003eFully bolt-on\u003c\/li\u003e\n\u003cli\u003eMade in America\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65.\u003c\/strong\u003e WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003eFitment: 2021+ Ford F-150 Raptor and Raptor R. Fitment confirmed against Addictive Desert Designs' published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0627\/4508\/4140\/files\/add-2021-raptor-stealth-fighter-rear-bumper-installation-instructions.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstall Instructions\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/ece91981707b45b2bbaeb801d3e88c36.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (supplier copy)\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021+\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor, Raptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":67809358414123,"sku":"ADDR210081090103","price":1799.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/r210081090103.jpg?v=1794510984"},{"product_id":"addictive-desert-designs-bomber-front-bumper-baja-2022-2026-ford-bronco-raptor-f260014120103","title":"Addictive Desert Designs Bomber Front Bumper (Baja) for 2022-2026 Ford Bronco Raptor F260014120103","description":"\u003cp\u003eThe Bomber Front Bumper (Baja) from Addictive Desert Designs is a tight-fitting replacement front bumper for the Ford Bronco Raptor. It is set up to carry Baja Designs LP4 lights in the center and cube lights at the sides, while keeping the factory parking sensors and tow hooks in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCenter light panel.\u003c\/strong\u003e A satin black aluminum panel in the middle of the bumper frames three mounting points for Baja Designs LP4 lights.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSide light mounts.\u003c\/strong\u003e Mounting points at each end take cube lights, so you can build a lighting layout that suits how you drive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlate steel and powder coat.\u003c\/strong\u003e The bumper is modern plate steel finished in hammer black powder coat, with satin black powder coated aluminum panels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWorks with factory equipment.\u003c\/strong\u003e The OEM parking sensors are built into the bumper design and the tow hooks stay below the bumper. Note that the OEM skid plate will not fit with the Bomber front bumper. ADD offers an optional 3\/16 in. vented aluminum skid plate made for it, and an optional Adaptive Cruise Control Relocation Bracket, which is required on trucks equipped with adaptive cruise control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMounts for 3 Baja Designs LP4 lights\u003c\/li\u003e\n\u003cli\u003eSide mounts for 2 cube lights\u003c\/li\u003e\n\u003cli\u003eHammer black powder coat finish\u003c\/li\u003e\n\u003cli\u003eSatin black powder coat panels\u003c\/li\u003e\n\u003cli\u003eModern plate steel design\u003c\/li\u003e\n\u003cli\u003eRetains OEM tow hooks\u003c\/li\u003e\n\u003cli\u003eRetains OEM parking sensors\u003c\/li\u003e\n\u003cli\u003eOptional 3\/16 in. aluminum skid plate\u003c\/li\u003e\n\u003cli\u003eOptional adaptive cruise control bracket (required on adaptive cruise control trucks)\u003c\/li\u003e\n\u003cli\u003eFully bolt-on\u003c\/li\u003e\n\u003cli\u003eMade in America\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFitment: 2022-2026 Ford Bronco Raptor. Fitment confirmed against Addictive Desert Designs' published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/2023-BroncoRaptor-Bomber-Front-InstallGuide.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBumper Install Guide\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/2021-ford-bronco-cruise-control-install.pdf\" target=\"_blank\" rel=\"noopener\"\u003eACC Bracket Install Guide\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/3b4fd1ada3e9188a237b5d68ad2f65f4.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (supplier copy)\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":67824611819819,"sku":"ADDF260014120103","price":1799.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/2022-2023-Ford-Bronco-Raptor-Bomber-Front-Bumper-Baja-full-body.jpg?v=1794511014"},{"product_id":"addictive-desert-designs-rock-fighter-front-bumper-2021-2026-ford-f-150-raptor-f210185080103","title":"Addictive Desert Designs Rock Fighter Front Bumper for 2021-2026 Ford F-150 Raptor and Raptor R F210185080103","description":"\u003cp\u003eThe Rock Fighter is a pre-runner style steel front bumper from Addictive Desert Designs for the Ford F-150 Raptor and Raptor R. It replaces the factory front bumper with a low-profile, plate-steel design, satin black accent panels and an included aluminum skid plate, and it is built and finished in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProtection under the nose.\u003c\/strong\u003e The included 3\/16-inch aluminum skid plate is lightweight and rust-proof, and it has integrated air vents so the intercooler keeps getting airflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKeeps factory equipment working.\u003c\/strong\u003e The design retains the OEM parking sensors and the OEM intercooler. Adding the Adaptive Cruise Control Relocation Bracket (sold separately) lets you keep full use of the truck's ACC functions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt-in lighting.\u003c\/strong\u003e A center mount holds a 20-inch dual-row radius LED light bar or five cube lights, so you can add light for low-visibility terrain without extra brackets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFinish and install.\u003c\/strong\u003e Two-stage hammer black powder coat guards the steel against scratches from brush and rocks, and the bumper is fully bolt-on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e2024+ F-150 Raptor note.\u003c\/strong\u003e On 2024+ Raptor models (not the Raptor R), the Shutter Motor Relocation Kit is needed so no dash lights appear when the lower intercooler shutter motor is disconnected for installation. ADD includes a shutter motor bracket with this bumper. It is also compatible with ADD's Raptor Intercooler Kit and Raptor R High Mount Heat Exchanger Kit (both sold separately); 2024+ models with the intercooler kit need the shutter motor relocation kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLow-profile fitment, steel construction\u003c\/li\u003e\n\u003cli\u003eIncluded 3\/16 in. aluminum skid plate with air vents\u003c\/li\u003e\n\u003cli\u003eCenter mount for a 20 in. dual-row radius LED light bar or five cube lights\u003c\/li\u003e\n\u003cli\u003eSatin black powder coat aluminum accent panels\u003c\/li\u003e\n\u003cli\u003eRetains OEM parking sensors and intercooler\u003c\/li\u003e\n\u003cli\u003eOptional ACC relocation bracket keeps ACC functions\u003c\/li\u003e\n\u003cli\u003eTwo-stage hammer black powder coat finish\u003c\/li\u003e\n\u003cli\u003eFully bolt-on installation\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProp 65 warning.\u003c\/strong\u003e This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003eFitment: 2021-2026 Ford F-150 Raptor and 2023-2026 Ford F-150 Raptor R (Addictive Desert Designs lists the bumper for the 2021+ Raptor and 2023+ Raptor R). Fitment confirmed against Addictive Desert Designs' published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/ADD-installguide-F210185080103.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBumper Install Guide\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/bd41ce42941a8fa75750f168cb8762c0.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (supplier copy)\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":67920152723755,"sku":"ADDF210185080103","price":2249.08,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/2024_Ford-F-150-Raptor-Rock-Fighter-Front-Bumper-8.jpg?v=1794510869"},{"product_id":"addictive-desert-designs-add-edge-front-bumper-2024-2026-ford-ranger-raptor-f720443130103","title":"Addictive Desert Designs ADD Edge Front Bumper for 2024-2026 Ford Ranger Raptor F720443130103","description":"\u003cp\u003eThe ADD Edge is a high-clearance steel front bumper from Addictive Desert Designs for the Ford Ranger Raptor. It pairs a sleek center light mount with low-profile wings, and it is proudly made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHighest clearance in the ADD lineup.\u003c\/strong\u003e The low-profile wings give the most clearance of any ADD bumper line, so the truck can approach larger obstacles off-road.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrenched-in light mount.\u003c\/strong\u003e The integrated center mount runs four RIGID 6-inch 360 Series lights or four Baja Designs LP4 lights, with a smooth, finished look.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRemovable skid plate.\u003c\/strong\u003e A heavy-duty aluminum front skid plate protects the Ranger Raptor's undercarriage and can be removed when needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKeeps factory equipment.\u003c\/strong\u003e The bumper retains the factory recovery points, parking sensors, driving assist features and intercooler. The finish is a hammer black powder coat with satin black accent panels over steel construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order.\u003c\/strong\u003e The bumper is not compatible with the XL, XLT and Lariat trim levels, or with the OEM fog lights and skid plate. ADD's Adaptive Cruise Control Relocation Bracket (sold separately) is required to maintain ACC, and ADD recommends trimming the inner fender liners for the best fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUltra low-profile design with high-clearance wings\u003c\/li\u003e\n\u003cli\u003eFrenched-in center light mount for (4) 6 in. round lights\u003c\/li\u003e\n\u003cli\u003eRazor-sharp styling\u003c\/li\u003e\n\u003cli\u003eRemovable heavy-duty 3\/16 in. aluminum skid plate\u003c\/li\u003e\n\u003cli\u003eRetains OEM recovery points, parking sensors, drive assist features and intercooler\u003c\/li\u003e\n\u003cli\u003eHammer black powder coat finish with satin black accent panels\u003c\/li\u003e\n\u003cli\u003eSteel construction, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProp 65 warning.\u003c\/strong\u003e This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003eFitment: 2024-2026 Ford Ranger Raptor. Not compatible with Ranger XL, XLT or Lariat. Fitment confirmed against Addictive Desert Designs' published application list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGuides \u0026amp; Manuals\u003c\/strong\u003e\u003c\/p\u003e\u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/ADD_installguide_F720443130103.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstall Instructions\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/e8247a1c477ad2539743c3fd2ff8baf4.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (supplier copy)\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2024-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":67920153182507,"sku":"ADDF720443130103","price":2159.08,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/2024-2025-Ford-Ranger-Raptor-ADD-Edge-Front-Bumper-1.jpg?v=1794510963"},{"product_id":"addictive-desert-designs-2024-ford-ranger-raptor-edge-rear-bumper","title":"Addictive Desert Designs 2024+ Ford Ranger Raptor Edge Rear Bumper","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eLow-profile rear bumper designed for the 2024+ Ranger Raptor with a sharp, aggressive look that matches factory body lines. Features light mounts for (2) Rigid SR-M or (2) Baja Designs S2 lights for added rear visibility. Retains OEM parking sensors, recovery points, license plate lights, and all factory drive assist features. Direct-fit installation using supplied hardware. Finished in a durable hammer black powder coat with satin black accent panels. Made in the USA.\u003c\/p\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/b05bdb8f561ccda20d7d0c65ee972f9b.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eIntegrated Light Mounts To Accommodate (2) Rigid Industries SRM Series Lights or (2) Baja Designs S2 Lights\u003c\/li\u003e\n\u003cli\u003eDirect Fitment Using Supplied Hardware For Easy Installation\u003c\/li\u003e\n\u003cli\u003eDurable Hammer Black Powder Coat With Satin Black Panels\u003c\/li\u003e\n\u003cli\u003eCompatible With All OEM Drive Assist Features\u003c\/li\u003e\n\u003cli\u003eRazor Sharp Design With Aggressive Detailing\u003c\/li\u003e\n\u003cli\u003eRetains OEM License Plate Lights\u003c\/li\u003e\n\u003cli\u003eRetains OEM Parking Sensors\u003c\/li\u003e\n\u003cli\u003eRetains OEM Recovery Points\u003c\/li\u003e\n\u003cli\u003eProudly Made in the USA\u003c\/li\u003e\n\u003cli\u003eLow-Profile Fitment\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2024-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":68112059138347,"sku":"ADDR720295090103","price":1709.08,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/bad129a5b0c6dad49af7b4ce74e012d4L.jpg?v=1794572459"},{"product_id":"arb-buffer-260x230-upright-bull-bar","title":"ARB Buffer 260X230 Upright Bull Bar","description":"ARB Buffer 260X230 Upright Bull Bar","brand":"ARB","offers":[{"title":"Default Title","offer_id":68155069071659,"sku":"ARB3162470LSP","price":70.0,"currency_code":"USD","in_stock":true}]},{"product_id":"arb-bumper-fitting-kit-bundle-3423200k","title":"ARB Bumper\/Fitting Kit Bundle 3423200K","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe Summit MKII Bumper muscles up with the most innovative and advanced technology yet, all while fully integrating with the suite of advanced driver assist safety technology that is available on newer vehicles. The state-of-the-art Summit MKII Bumper takes key components of its flagship namesake and kicks it up a notch with an ultra-modern design that’s constructed to turn heads. The Summit MKII Bumper has eliminated front buffers and now has robot welds on the front face playing into its modern aesthetic. Lighting capabilities have been significantly updated to include a plug-and-play sequential indicator, clearance light, daytime running light and fog light within one complete unit for an integrated approach.\u003c\/p\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/ecbf9b3f0c4c9fa52318bf16dec2a88a.PDF\"\u003eWarranty\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/0dbb626dd2f61bfeed74a90b936cb765.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/6b1d012d13b7b044b43b45cc7ebbacbc.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eHawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead (synthetic winch)\u003c\/li\u003e\n\u003cli\u003eIncludes LED fog lights, LED daytime running lights and LED indicators and clearance lights\u003c\/li\u003e\n\u003cli\u003eMulti-fold, upswept and tapered wing design for optimum strength and approach angle\u003c\/li\u003e\n\u003cli\u003eAir bag compatible mounting system secures to the chassis via high tensile bolts\u003c\/li\u003e\n\u003cli\u003eCompatible with most electric low mount winches, up to 10,000 lb capacity\u003c\/li\u003e\n\u003cli\u003eCompatible with original equipment manufacturer (OEM) safety features\u003c\/li\u003e\n\u003cli\u003eTwin ARB Jack or farm jack points located in the lower pan\u003c\/li\u003e\n\u003cli\u003eDurable steel construction for maximum protection\u003c\/li\u003e\n\u003cli\u003eTwo aerial brackets located on the center frame\u003c\/li\u003e\n\u003cli\u003eProvision for driving lights\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2023\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTacoma\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2023\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTacoma\u003c\/td\u003e\n\u003ctd\u003eSR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2023\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTacoma\u003c\/td\u003e\n\u003ctd\u003eSR5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTacoma\u003c\/td\u003e\n\u003ctd\u003eTrail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTacoma\u003c\/td\u003e\n\u003ctd\u003eTrail Special Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2023\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTacoma\u003c\/td\u003e\n\u003ctd\u003eTRD Off-Road\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2023\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTacoma\u003c\/td\u003e\n\u003ctd\u003eTRD Sport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"ARB","offers":[{"title":"Default Title","offer_id":68155069137195,"sku":"ARB3423200KB","price":2945.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/4ed0503602adf332d42a11232ff99658L_d329f33f-8d9d-4c4b-a6d6-dc1da5853a65.jpg?v=1794976750"},{"product_id":"arb-rear-bar-3500kg-100ifs-black","title":"ARB Rear Bar 3500Kg 100Ifs Black","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe Summit Rear Bumper combines class-leading design, proven ARB engineering and a no-compromise approach to protection and performance. Built around a tubular steel subframe that is finished in a textured black powder coat, the Summit rear bumper includes an integrated tow hitch, provisions for an ARB air compressor and trailer camera wiring, 50 amp Anderson plug and trailer plug wiring. With four easily accessible ARB Jack and Hi-Lift jack points, the Summit rear bumper is ready for the most demanding off-road use.\u003c\/p\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/1d00d44d52bfb60ac30b3c87022df2ab.PDF\"\u003eWarranty\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/a574d06c504a79b3f9146fc31b8615d2.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eRear bumper only, must be installed with either wheel carriers, jerry can holder or cover panels (sold separately)\u003c\/li\u003e\n\u003cli\u003eVehicle-specific design ensures excellent ground clearance and departure angles\u003c\/li\u003e\n\u003cli\u003eManufactured From Steel For Maximum Strength\u003c\/li\u003e\n\u003cli\u003eCombines Rear Vehicle Protection with Towing\u003c\/li\u003e\n\u003cli\u003eSuitable for Vehicles without Sensors\u003c\/li\u003e\n\u003cli\u003eIntegrated Tow Hitch\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1998-2007\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eLand Cruiser\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"ARB","offers":[{"title":"Default Title","offer_id":68155069202731,"sku":"ARB5613210","price":2295.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/5752\/8363\/files\/535220eede5658dc81f7aa13da883e78.jpg?v=1794976750"}],"url":"https:\/\/raptorsonly.com\/collections\/bumpers-grilles-guards.oembed","provider":"RaptorsOnly.com","version":"1.0","type":"link"}